summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/README.adnpesc1235
-rw-r--r--doc/README.adnpesc1_base32469
-rw-r--r--doc/README.dk1c20153
-rw-r--r--doc/README.dk1c20_std32366
-rw-r--r--doc/README.dk1s10131
-rw-r--r--doc/README.dk1s10_mldk20286
-rw-r--r--doc/README.dk1s10_std32354
-rw-r--r--doc/README.dk1s40_std32355
-rw-r--r--doc/README.dk20k200_std32242
-rw-r--r--doc/README.nios366
-rw-r--r--doc/README.nios_CONFIG_SYS_NIOS_CPU140
-rw-r--r--doc/README.nios_DK192
-rw-r--r--doc/uImage.FIT/source_file_format.txt3
13 files changed, 1 insertions, 3291 deletions
diff --git a/doc/README.adnpesc1 b/doc/README.adnpesc1
deleted file mode 100644
index f9566b8..0000000
--- a/doc/README.adnpesc1
+++ /dev/null
@@ -1,235 +0,0 @@
-
- SSV ADNP/ESC1 Embedded Softcore Computing
- Nios Softcore, Altera Cyclone FPGA
-
- Last Update: February 27, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the SSV Embedded
-Nios Softcore Computing platform ADNP/ESC1. For general Nios
-information see doc/README.nios.
-
-Most stuff of this file was borrowed and based on README.dk1s10,
-the Altera DK-1S10 related information file.
-
-For those interested in contributing ... see HELP WANTED section
-in doc/README.nios.
-
-Contents:
-
- 1. Files
- 2. Memory Organization
- 3. CPU Variations
- 4. Examples
- 5. Programming U-Boot into FLASH with GERMS
- 6. Autoboot
- 7. U-Boot environment convention and update philosophy
-
-====================================================================
-
-1. Files
-=========
- board/ssv/adnpesc1/*
- include/configs/ADNPESC1.h
- include/configs/ADNPESC1_base_32.h
-
-
-2. Memory Organization
-=======================
-
-For the most part, you can put things pretty much anywhere.
-This is pretty flexible for Nios. So here we make some arbitrary
-choices & assume that the monitor is placed at the end of a memory
-resource. So you must make sure TEXT_BASE is chosen appropriately.
-This is very important if you plan to move your memory to another
-place as configured at this time!
-
- -The heap is placed below the monitor (U-Boot code).
- -Global data is placed below the heap.
- -The stack is placed below global data (&grows down).
-
-(see doc/README.adnpesc1_base32 too)
-
-
-3. CPU Variations
-=================
-
-There are more than one NIOS CPU variation for the ADNP/ESC1 possible.
-U-Boot supports the following CPU configurations:
-
- - SSV Basis 32 (make ADNPESC1_base_32_config)
- - SSV Basis 32 at DNP evaluation base board 2
- (make ADNPESC1_DNPEVA2_base_32_config)
-
-
-4. Examples
-============
-
-The hello_world example works fine. To try out you have to change
-the default load address from 0x0100_0000 to 0x0204_0000 in
-examples/Makefile (the real SDRAM for default board configuration).
-
-
-5. Programming U-Boot into FLASH with GERMS
-============================================
-
-The current version of the ADNP/ESC1 port with the default
-configuration settings occupies about 97 KBytes of flash.
-A minimal configuration occupies less than 70 KByte
-(network, SPI, POST and board command support disabled). You
-can save more memory by deactivating the Hu-Shell support and
-long command help (CONFIG_SYS_HUSH_PARSER, CONFIG_SYS_LONGHELP).
-
-To program U-Boot into the ADNP/ESC1 flash using GERMS do the
-following:
-
-1. Download U-Boot to its target run space in SDRAM:
-
- a. Close jumper RCM_EN# and push the reset button.
-
- b. From the command line, download U-Boot using the
- nios-run:
-
- $ nios-run -r u-boot.srec
-
- NOTE: In some cases this want fail. I don't know why,
- but try again.
-
-This takes about 1 minute (GERMS is not very speedy here).
-After u-boot is downloaded it will be executed. You should
-see the following:
-
- U-Boot 1.0.2 (Jan 30 2004 - 12:59:15)
-
- CPU: Nios-32 Rev. 3.3 (0x3038)
- Reg file size: 512 LO_LIMIT/HI_LIMIT: 1/30
- Board: SSV DilNetPC ADNP/ESC1
- Conf.: SSV Base 32 (nios_32)
- In: serial
- Out: serial
- Err: serial
- ADNPESC1 >
-
-
-2. Quit nios-run and start your terminal application (e.g. start
- Hyperterminal or minicom).
-
-3. Download the u-boot code to RAM. When using Hyperterminal, do the
- following:
-
- a. From the u-boot command prompt start a binary download to SDRAM:
-
- at the SSV Basis 32 to SDRAM:
-
- ==> loadb 2000100
-
- b. Download u-boot.bin using kermit.
-
-4. From the U-Boot command prompt, erase flash:
-
- at the SSV Basis 32 from 0x1000000 to 0x103ffff:
-
- ==> protect off 1:0-3
- ==> erase 1:0-3
-
-5. Copy the binary image from SDRAM to flash:
-
- at the SSV Basis 32 from SDRAM:
-
- ==> cp.b 2000100 1000000 $filesize
-
-U-Boot will now automatically start when the board is powered on or
-reset using the SSV Basis 32 configuration without closed RCM jumper.
-To start U-Boot with closed RCM Jumper, enter the following GERMS
-command:
-
- + g 1000000
-
-
-6. Autoboot
-===========
-
-U-Boot will try to boot a valid Nios application from Flash. For this
-it will use the deposited Hu-Shell script in environment variable
-'bootcmd' which is looking for a valid Nios application identifier
-string in Flash and go on at even its entry address. For more
-information see the next chapter.
-
-
-7. U-Boot environment convention and update philosophy
-======================================================
-
-U-Boot for the SSV ADNP/ESC1 target knows about many environment
-variables used to control the startup process, update process for
-raw Nios applications, and optionally file system image updates.
-In default configuration there are two Hu-Shell scripts to update
-the Nios application and/or the file system image:
-
-1. Update Nios application (ex. the uCLinux kernel):
-
- run 'appl_update'
-
-2. Update optional file system image (ex. RomFS image used by uCLinux):
-
- run 'fs_update'
-
-The Nios application can be any programm code generated in relation
-to the Nios application identifier -- the string "Nios" at offset
-address 0x0c. To use the scripts like described above in a secure way
-you have to check-up the next environment variables:
-
-1. update_allowed
-
- - Update switch -- must be set to '1' (one) to allow any update
- - default is '0' (zero)
-
- NOTE: You should avoid to save this variable with non zero
- value to Flash. Otherwise it would be allow any
- update process at any time!
-
-2. appl_entry_addr
-
- - Nios application area start address (usually in Flash)
- - this is the startup address for autoboot
- - each Nios application code we want to update will be copied
- to this address
- - default is CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY
-
-3. appl_end_addr
-
- - Nios application area end address (usually in Flash)
- - will be used to unprotect/erase the Flash area while updating
- - default is CONFIG_SYS_ADNPESC1_NIOS_APPL_END
-
-4. appl_ident_addr
-
- - address of the Nios application identification string
- - this is the address checked-up by autoboot
- - default is CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT
-
-5. appl_ident_str
-
- - the Nios application identification string itself
- - default is CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER
-
-6. appl_name
-
- - name of file we have to download/update
- - default is ADNPESC1/base32/linux.bin
-
-7. fs_base_addr
-
- - optionally file system area start address (usually in Flash)
- - each file system we want to update will be copied to this address
- - default is CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE
-
-8. fs_end_addr
-
- - optionally file system area end address (usually in Flash)
- - will be used to unprotect/erase the Flash area while updating
- - default is CONFIG_SYS_ADNPESC1_FILESYSTEM_END
-
-9. fs_name
-
- - name of file we have to download/update
- - default is ADNPESC1/base32/romfs.img
diff --git a/doc/README.adnpesc1_base32 b/doc/README.adnpesc1_base32
deleted file mode 100644
index e6fb7a4..0000000
--- a/doc/README.adnpesc1_base32
+++ /dev/null
@@ -1,469 +0,0 @@
-
-TODO: specify IDE i/f
-
-
-===============================================================================
- C P U , M E M O R Y , I N / O U T C O M P O N E N T S
-===============================================================================
-see also [1]-[5]
-
-CPU: "DNP_ESC1"
- 32 bit NIOS for 50 MHz
- 512 Byte for register file (30 levels)
- with out instruction cache
- with out data cache
- 2 KByte On Chip ROM with GERMS boot monitor
- with out On Chip RAM
- MSTEP multiplier
- no Debug Core
- no On Chip Instrumentation (OCI)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
- CONFIG_SYS_NIOS_CPU_ICACHE = (not present)
- CONFIG_SYS_NIOS_CPU_DCACHE = (not present)
- CONFIG_SYS_NIOS_CPU_REG_NUMS = 512
- CONFIG_SYS_NIOS_CPU_MUL = 0
- CONFIG_SYS_NIOS_CPU_MSTEP = 1
- CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
-
-IRQ: Nr. | used by
- ------+--------------------------------------------------------
- 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
- 17 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 17
- 18 | UART1 | CONFIG_SYS_NIOS_CPU_UART1_IRQ = 18
- 20 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ =
- | PIO6 | CONFIG_SYS_NIOS_CPU_PIO6_IRQ = 20
- 25 | SPI0 | CONFIG_SYS_NIOS_CPU_SPI0_IRQ = 25
- 31 | PIO7 | CONFIG_SYS_NIOS_CPU_PIO7_IRQ = 31
- 32 | PIO8 | CONFIG_SYS_NIOS_CPU_PIO8_IRQ = 32
- 33 | PIO9 | CONFIG_SYS_NIOS_CPU_PIO9_IRQ = 33
- 34 | PIO10 | CONFIG_SYS_NIOS_CPU_PIO10_IRQ = 34
- 35 | PIO11 | CONFIG_SYS_NIOS_CPU_PIO11_IRQ = 35
- 36 | PIO12 | CONFIG_SYS_NIOS_CPU_PIO12_IRQ =
- | IDE0 | CONFIG_SYS_NIOS_CPU_IDE0_IRQ = 36
- 37 | PIO13 | CONFIG_SYS_NIOS_CPU_PIO13_IRQ =
- | IDE1 | CONFIG_SYS_NIOS_CPU_IDE1_IRQ = 37
-
-MEMORY: 8 MByte Flash
- 16 MByte SDRAM
-
-Timer: TIMER0: high priority programmable timer (IRQ16)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 0
- CONFIG_SYS_NIOS_CPU_USER_TIMER = (not present)
-
-PIO: Nr. | description
- ------+--------------------------------------------------------
- PIO0 | PORTA: 8 in/outputs for general purpose usage
- PIO1 | PORTB: 8 in/outputs for general purpose usage
- PIO2 | PORTC: 4 in/outputs for general purpose usage
- PIO3 | RCM: 1 input for RCM_EN# jumper (Req.Conf.Mon.)
- PIO4 | WDTENA: 1 output to enable the on-board watchdog
- PIO5 | WDTTRIG: 1 output to trigger the on-board watchdog
- PIO6 | LAN0INT: 1 input for LAN91C111 irq input (IRQ20)
- PIO7 | INT1: 1 input for general purpose irq (IRQ31)
- PIO8 | INT2: 1 input for general purpose irq (IRQ32)
- PIO9 | INT3: 1 input for general purpose irq (IRQ33)
- PIO10| INT4: 1 input for general purpose irq (IRQ34)
- PIO11| INT5: 1 input for general purpose irq (IRQ35)
- PIO12| INT6: 1 input for general purpose irq (IRQ36)
- | IDE0INT: (same) for IDE0 irq input
- PIO13| INT7: 1 input for general purpose irq (IRQ37)
- | IDE1INT: (same) for IDE1 irq input
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_PORTA_PIO = 0
- CONFIG_SYS_NIOS_CPU_PORTB_PIO = 1
- CONFIG_SYS_NIOS_CPU_PORTC_PIO = 2
- CONFIG_SYS_NIOS_CPU_RCM_PIO = 3
- CONFIG_SYS_NIOS_CPU_WDTENA_PIO = 4
- CONFIG_SYS_NIOS_CPU_WDTTRIG_PIO = 5
- CONFIG_SYS_NIOS_CPU_LED_PIO = (not present)
-
-UART: UART0: fixed baudrate of 115200, fixed protocol 8N1, RTS/CTS (IRQ17)
- UART1: fixed baudrate of 115200, fixed protocol 8N1,
- without handshake RTS/CTS (IRQ18)
-
-SPI: SPI0: master capable, 1 slave selectable, 250kHz target clock,
- 2 usec targets delay between slave select and clock,
- data is transferred MSB-first / LSB-last (IRQ25)
-
-LAN: SMsC LAN91C111 with:
- - without offset
- - data bus width 16 bit (on-board hard wired at 32 bit bus)
- - !!! 32 bit bus access --> each address * 2 !!!
-
-IDE: (TODO)
-
-
-===============================================================================
- M E M O R Y M A P
-===============================================================================
-
-- - - - - - - - - - - external extension - - - - - - - - - - - - - - - - - - -
-
- 0x44000000 ---32-----------16|15------------0-
- | | | \
- : (real size : : |
- EXT3 (CS4) : and content : : > CONFIG_SYS_NIOS_CPU_CS3_SIZE
- : unknown) : : | = 0x01000000
- | | | /
- 0x43000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS3_BASE
- | | | \
- : (real size : : |
- EXT2 (CS3) : and content : : > CONFIG_SYS_NIOS_CPU_CS2_SIZE
- : unknown) : : | = 0x01000000
- | | | /
- 0x42000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS2_BASE
- | | | \
- : (real size : : |
- EXT1 (CS2) : and content : : > CONFIG_SYS_NIOS_CPU_CS1_SIZE
- : unknown) : : | = 0x01000000
- | | | /
- 0x41000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS1_BASE
- | | | \
- : (real size : : |
- EXT0 (CS1) : and content : : > CONFIG_SYS_NIOS_CPU_CS0_SIZE
- : unknown) : : | = 0x01000000
- | | | /
- 0x40000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS0_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x03000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_STACK
- | . | \
- | . | | (U-Boot run-time system)
- | . | |
- | . | > CONFIG_SYS_MONITOR_LEN
- | . | | = 0x00040000
- | . | |
- | . | /
- 0x02fc0000 --+32-----------16|15------------0+ TEXT_BASE
- | . | \
- | . | > CONFIG_SYS_MALLOC_LEN (heap)
- | . | /
- --+32-----------16|15------------0+
- | . | \
- | . | > CONFIG_SYS_GBL_DATA_SIZE (global)
- | . | /
- --+32-----------16|15------------0+ CONFIG_SYS_INIT_SP (u-boot stack)
- | . | \ \
- | . | | |
- | . | | > stack area
- | . | | |
- | . | | V
- | . | |
- | . | |
- SDRAM | . | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
- | . | | = 0x01000000
- | . | |
- 0x02000100 |- - - - - - - - - - - - - - - -+-|-
- | . | | \
- | . | | |
- | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
- | . | | | = 0x00000100
- | | / /
- 0x02000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE
- 0x02000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE
- | | \
- : gap : > (space for 2nd Flash)
- | | /
- 0x01800000 ---32-----------16|15------------0-
- | sector 127 | \
- + 0x7f0000 |- - - - - - - - - - - - - - - -| |
- | : | |
- Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
- | sector 1 : | | = 0x00800000
- + 0x010000 |- - - - - - - - - - - - - - - -| |
- | sector 0 (size = 0x10000) | /
- 0x01000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00010020 ---32-----------16|15------------0-
- | | \
- | register bank | |
- | size = (real_size << 1) | |
- | real_size = 0x10 | |
- | +--------.---.---.--- | |
- | | bank 0 \ 1 \ 2 \ 3 \ | |
- | |---------------------------+ | |
- LAN91C111 | | BANK | RESERVED | | > na_enet_size
- | |- - - - - - -|- - - - - - -| | | = 0x00000020
- | | RPCR | MIR | | |
- | |- - - - - - -|- - - - - - -| | |
- | | COUNTER | RCR | | |
- | |- - - - - - -|- - - - - - -| | |
- | | EPH STATUS | TCR | | |
- | +---------------------------+ | /
- 0x00010000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00001040 ---32-----------16|15------------0-
- | | | \
- : : : |
- IDE1 i/f : : : > 0x00000020
- [5] : : : |
- | | | /
- 0x00001020 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE1
- | | | \
- : : : |
- IDE0 i/f : : : > 0x00000020
- [5] : : : |
- | | | /
- 0x00001000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
- | |
- : gap :
- | |
- 0x00000980 ---32-----------16|15------------0-
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO13 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO13
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO12 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO12
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO11 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000950 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO11
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO10 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO10
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO9 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000930 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO9
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO8 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000920 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO8
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO7 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000910 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO6 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6
- | |
- : gap :
- | |
- 0x000008e0 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | endofpacket (16 bit) (rw) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | slaveselect (1 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- SPI0 | (reserved) | |
- [4] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | control (11 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (9 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (16 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (16 bit) (ro) | /
- 0x000008c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SPI0
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO5 | (unused) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x000008b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO4 | (unused) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x000008a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO3 | (unused) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000890 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO2 | (unused) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (4 bit) (rw) | /
- 0x00000880 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO1 | (unused) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (8 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (8 bit) (rw) | /
- 0x00000870 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO0 | (unused) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (8 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (8 bit) (rw) | /
- 0x00000860 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | snaph (16 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER0 | snapl (16 bit) (rw) | |
- [2] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | periodh (16 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | periodl (16 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x00000840 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART1 | (unused) | > 0x00000020
- [1] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00000820 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART1
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
- [1] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00000800 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
-
- 0x00000800 ---32-----------16|15------------0-
- | : | \
- | : | |
- GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
- | : | | = 0x00000800
- | : | /
- 0x00000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
- 0x00000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-
-===============================================================================
- F L A S H M E M O R Y A L L O C A T I O N
-===============================================================================
-
- 0x01800000 ---8-------------4|3-------------0-
- | : | \
- | : | |
- | : | > 6 MByte ROM FS
- | : | |
- | : | /
- 0x01200000 --+- - - - - - - -:- - - - - - - -+- - file system image(s)
- | : | \
- | : | |
- | : | > 1728 kByte ucLinux
- | : | |
- | : | /
- 0x01050000 --+- - - - - - - -:- - - - - - - -+- - os image(s)
- | : | \
- 0x01040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot environment
- | : | |
- | : | > 320 kByte U-Boot
- | : | |
- | : | |
- | : | /
- 0x01000000 --+- - - - - - - -:- - - - - - - -+- - u-boot _start()
- 0x01000000 ---8-------------4|3-------------0-
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_spi.pdf
-[5] http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1c20 b/doc/README.dk1c20
deleted file mode 100644
index 3c0e41b..0000000
--- a/doc/README.dk1c20
+++ /dev/null
@@ -1,153 +0,0 @@
-
- Nios Development Kit
- Cyclone Editions
-
- Last Update: January 2, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the Altera
-Nios Development Kit, Cyclone Edition (DK-1C20). For general Nios
-information see doc/README.nios.
-
-For those interested in contributing ... see HELP WANTED section
-in doc/README.nios.
-
-Contents:
-
- 1. Files
- 2. Memory Organization
- 3. Examples
- 4. Programming U-Boot into FLASH with GERMS
- 5. Active Serial Memory Interface (ASMI) Support
-
-====================================================================
-
-1. Files
-=========
- board/altera/dk1c20/*
- include/configs/DK1C20.h
-
-2. Memory Organization
-=======================
-
- -The heap is placed below the monitor (U-Boot code).
- -Global data is placed below the heap.
- -The stack is placed below global data (&grows down).
-
-3. Examples
-============
-
-The hello_world example works fine. The default load address
-is 0x0100_0000 (the start of SDRAM).
-
-
-4. Programming U-Boot into FLASH with GERMS
-============================================
-The current version of the DK-1C20 port with the default
-configuration settings occupies about 81 KBytes of flash.
-A minimal configuration occupies less than 60 KByte (asmi
-and network support disabled).
-
-To program U-Boot into the DK-1C20 flash using GERMS do the
-following:
-
-1. From the command line, download U-Boot using the nios-run:
-
- $ nios-run -r u-boot.srec
-
-This takes about 45 seconds (GERMS is not very speedy here).
-After u-boot is downloaded it will be executed. You should
-see the following:
-
- U-Boot 1.0.0-pre (Oct 4 2003 - 07:39:24)
-
- CPU: Nios-32 Rev. 3.3 (0x3038)
- Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14
- Board: Altera Nios 1C20 Development Kit
- In: serial
- Out: serial
- Err: serial
- ==>
-
-
-2. Quit nios-run and start your terminal application (e.g. start
-Hyperterminal or minicom).
-
-3. Download the u-boot code to RAM. When using Hyperterminal, do the
-following:
-
- a. From the u-boot command prompt start a binary download to SRAM:
-
- ==> loadb 800000
-
- b. Download u-boot.bin using kermit.
-
-4. From the U-Boot command prompt, erase flash 0x40000 to 0x5ffff:
-
- ==> erase 1:4-5
-
-5. Copy the binary image from SRAM to flash:
-
- ==> cp.b 800000 40000 10000
-
-U-Boot will now automatically start when the board is powered on or
-reset using the Standard-32 configuration. To start U-Boot with the
-Safe-32 configuration, enter the following GERMS command:
-
- + g 40000
-
-5. Active Serial Memory Interface (ASMI) Support
-================================================
-ASMI is fully supported in U-Boot. Please note that ASMI is supported
-only on Cyclone devices. Do not expect ASMI to work with Stratix or
-APEX devices.
-
- ************* IMPORTANT *************
- ===================================================
- IN ORDER FOR THE NIOS ASMI TO OPERATE PROPERLY, THE
- CYCLONE DEVICE MUST BE CONFIGURED USING JTAG OR ASMI.
-
-There are two techniques you can use to bootstrap the ASMI. The
-first is to use the program_epcs utility that is part of Altera's SDK.
-But I've found program_epcs to be slow and cumbersome at best.
-
-An undocumented alternative is to use the Quartus device programing
-interface:
-
- 1. Select "Active Serial" mode.
-
- 2. Choose the xxx.pof file. For example, for the standard_32
- configuration use the "standard_32.pof" file.
-
- 3. Attach your ByteBlaster to J28. Make sure you have the
- cable attached properly -- the orientation of J28 is
- different than J24 (the JTAG header). On J28, pin 1 is on
- the bottom row, left-most pin.
-
- 4. Press and hold the "Power-On Reset" switch (SW10). You will
- see the green "Loading" and red "Error" LEDs (LED3 and LED4)
- in the on state.
-
- 5. While holding down the "Power-On Reset" switch, start the
- programming sequence. This only takes about 10 seconds.
-
- 6. After programming is complete, release the "Power-On Reset"
- switch. The Cyclone device should now load its configuration
- from the EPCS4 (U59). The green "User" LED (LED 1) should be
- blinking if the device was successfully loaded via ASMI.
-
- 7. Remove the ByteBlaster cable. The cable must be removed to
- allow the Nios ASMI access to the EPCS4 device.
-
-After you have successfully programmed a configuration into the
-EPCS4, the ASMI will be used to load the Cyclone configuration
-unless the "Force Safe" switch (SW9) is pressed.
-
-NOTE: To maximize the amount of space available for program use,
-you can enable configuration compression in Quartus. With compression
-enabled, the size of the standard_32 configuration data is
-approximately 192 KBytes.
-
-To use the U-Boot ASMI commands, try typing "help asmi" at the
-command prompt. The command "asmi info" will show the current
-status of the ASMI.
diff --git a/doc/README.dk1c20_std32 b/doc/README.dk1c20_std32
deleted file mode 100644
index 2be1299..0000000
--- a/doc/README.dk1c20_std32
+++ /dev/null
@@ -1,366 +0,0 @@
-
-TODO: specify IDE i/f
- specify ASMI i/f
- specify OCI
-
-
-===============================================================================
- C P U , M E M O R Y , I N / O U T C O M P O N E N T S
-===============================================================================
-see also [1]-[6]
-
-CPU: "standard_32"
- 32 bit NIOS for 50 MHz
- 256 Byte for register file (15 levels)
- 4 KByte instruction cache (2 bytes in each cache line)
- 4 KByte data cache (4 bytes in each cache line)
- 2 KByte On Chip ROM with GERMS boot monitor
- no On Chip RAM
- MSTEP multiplier
- no Debug Core
- On Chip Instrumentation (OCI) enabled
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
- CONFIG_SYS_NIOS_CPU_ICACHE = 4096
- CONFIG_SYS_NIOS_CPU_DCACHE = 4096
- CONFIG_SYS_NIOS_CPU_REG_NUMS = 256
- CONFIG_SYS_NIOS_CPU_MUL = 0
- CONFIG_SYS_NIOS_CPU_MSTEP = 1
- CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
-
-OCI: (TODO)
-
-IRQ: Nr. | used by
- ------+--------------------------------------------------------
- 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
- 25 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 25
- 30 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 30
- 35 | PIO5 | CONFIG_SYS_NIOS_CPU_PIO5_IRQ = 35
- 40 | PIO0 | CONFIG_SYS_NIOS_CPU_PIO0_IRQ = 40
- 45 | ASMI | CONFIG_SYS_NIOS_CPU_ASMI0_IRQ = 45
- 50 | TIMER1 | CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
-
-MEMORY: 8 MByte Flash
- 1 MByte SRAM
- 16 MByte SDRAM
-
-ASMI: (TODO) <-- ASMI part is 4M bits
-
-Timer: TIMER0: high priority programmable timer (IRQ16)
- TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 1
- CONFIG_SYS_NIOS_CPU_USER_TIMER = 0
-
-PIO: Nr. | description
- ------+--------------------------------------------------------
- PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40)
- PIO1 | LCD: 11 in/outputs for ASCII LCD
- PIO2 | LED: 8 outputs for user LEDs
- PIO3 | SEVENSEG: 16 outputs for user seven segment display
- PIO4 | RECONF: 1 in/output for . . . . . . . . . . . .
- PIO5 | CFPRESENT: 1 input for CF present event (IRQ35)
- PIO6 | CFPOWER: 1 output to controll CF power supply
- PIO7 | CFATASEL: 1 output to controll CF ATA card select
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 0
- CONFIG_SYS_NIOS_CPU_LCD_PIO = 1
- CONFIG_SYS_NIOS_CPU_LED_PIO = 2
- CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 3
- CONFIG_SYS_NIOS_CPU_RECONF_PIO = 4
- CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = 5
- CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 6
- CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = 7
-
-UART: UART0: fixed baudrate of 115200, fixed protocol 8N1,
- without handshake RTS/CTS (IRQ25)
-
-LAN: SMsC LAN91C111 with:
- - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
- - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
-
-IDE: (TODO)
-
-
-===============================================================================
- M E M O R Y M A P
-===============================================================================
-
-- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - -
-
- 0x02000000 ---32-----------16|15------------0-
- | : | \
- | : | |
- SDRAM | : | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
- | : | | = 0x01000000
- | : | /
- 0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x________ ---32-----------16|15------------0-
- | | | \
- : (real size : : |
- ASMI i/f : and content : : > 0x________
- [5] : unknown) : : |
- | | | /
- 0x00920b00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ASMI0
- | |
- : gap :
- | |
- 0x00920a80 ---32-----------16|15------------0-
- | | | \
- : (real size : : |
- IDE i/f : and content : : > 0x00000080
- [6] : unknown) : : |
- | | | /
- 0x00920a00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER1 | (unused) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | (unused) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (1 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x009209e0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER1
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO7 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x009209d0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO6 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x009209c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO5 | interruptmask (1 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x009209b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO4 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (1 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (rw) | /
- 0x009209a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO3 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (16 bit) (wo) | /
- 0x00920990 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO2 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (8 bit) (wo) | /
- 0x00920980 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO1 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (11 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (11 bit) (rw) | /
- 0x00920970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
- | edgecapture (4 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO0 | interruptmask (4 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (4 bit) (ro) | /
- 0x00920960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | snaph (16 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER0 | snapl (16 bit) (rw) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | periodh (16 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | periodl (16 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x00920940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
- | | \
- : gap : > (space for UART1)
- | | /
- 0x00920920 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00920900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - -
-
- 0x00920900 -----------------------------------
- | | \
- : (real size : |
- OCI Debug : and content : > CONFIG_SYS_NIOS_CPU_OCI_SIZE
- : unknown) : | = 0x00000100
- | | /
- 0x00920800 ----------------------------------- CONFIG_SYS_NIOS_CPU_OCI_BASE
-
-- - - - - - - - - - - on chip memory - - - - - - - - - - -
-
- 0x00920800 ---32-----------16|15------------0-
- | : | \
- | : | |
- GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
- | : | | = 0x00000800
- | : | /
- 0x00920000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
- 0x00920000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
-
- 0x00920000 ---32-----------16|15------------0-
- | gap | \
- 0x00910310 --+-------------------------------| |
- | | |
- | register bank (size = 0x10) | |
- | +--------.---.---.--- | |
- | | bank 0 \ 1 \ 2 \ 3 \ | |
- | |---------------------------+ | |
- LAN91C111 | | BANK | RESERVED | | |
- | |- - - - - - -|- - - - - - -| | > na_lan91c111_size
- | | RPCR | MIR | | | = 0x00010000
- | |- - - - - - -|- - - - - - -| | |
- | | COUNTER | RCR | | |
- | |- - - - - - -|- - - - - - -| | |
- | | EPH STATUS | TCR | | |
- | +---------------------------+ | |
- 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
- | gap | /
- 0x00910000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00900000 ---32-----------16|15------------0-
- 0x00900000 --+32-----------16|15------------0+
- | : | \ \
- | : | | |
- | : | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
- | : | | | = 0x00000100
- | : | | /
- 0x008fff00 |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
- 0x008fff00 |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
- | : | | \
- | : | | |
- | : | | > stack area
- | : | | |
- | : | | V
- | : | |
- SRAM | : | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
- | : | | = 0x00100000
- | : | /
- 0x00800000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
- 0x00800000 ---8-------------4|3-------------0-
- | sector 127 | \
- + 0x7f0000 |- - - - - - - - - - - - - - - -| |
- | : | |
- Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
- | sector 1 : | | = 0x00800000
- + 0x010000 |- - - - - - - - - - - - - - - -| |
- | sector 0 (size = 0x10000) | /
- 0x00000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
-
-
-===============================================================================
- F L A S H M E M O R Y A L L O C A T I O N
-===============================================================================
-
- 0x00800000 ---8-------------4|3-------------0-
- | : | \
- SAFE | : | > 1 MByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00700000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- USER | : | > 1 MByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00600000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- WEB pages | : | > 2 MByte
- | : | | (provisory usable)
- | : | /
- 0x00400000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- | : | |
- | : | > 4 MByte free for use
- | : | |
- 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
- | : | /
- 0x00000000 |- - - - - - - -:- - - - - - - -+- - u-boot environment
- 0x00000000 ---8-------------4|3-------------0-
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/manual/mnl_nios_board_cyclone_1c20.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf
- http://www.altera.com/literature/wp/wp_epcs_cyc.pdf
-[6] http://www.opencores.org/projects/ata/
- http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1s10 b/doc/README.dk1s10
deleted file mode 100644
index 622bef5..0000000
--- a/doc/README.dk1s10
+++ /dev/null
@@ -1,131 +0,0 @@
-
- Nios Development Kit
- Startix Editions
-
- Last Update: January 28, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the Altera
-Nios Development Kit, Startix Edition (DK-1S10). For general Nios
-information see doc/README.nios.
-
-Most stuff of this file was borrowed and based on README.dk1c20,
-the DK-1C20 related information file.
-
-For those interested in contributing ... see HELP WANTED section
-in doc/README.nios.
-
-Contents:
-
- 1. Files
- 2. Memory Organization
- 3. CPU Variations
- 4. Examples
- 5. Programming U-Boot into FLASH with GERMS
-
-====================================================================
-
-1. Files
-=========
- board/altera/dk1s10/*
- include/configs/DK1S10.h
-
-2. Memory Organization
-=======================
-
- -The heap is placed below the monitor (U-Boot code).
- -Global data is placed below the heap.
- -The stack is placed below global data (&grows down).
-
-3. CPU Variations
-=================
-
-There are more than one NIOS CPU variation for the DK-1S10. U-Boot
-supports the following CPU configurations:
-
- - Altera Standard 32 (make DK1S10_standard_32_config)
- - Microtronix LDK 2.0 (make DK1S10_mtx_ldk_20_config)
-
-4. Examples
-============
-
-The hello_world example was never tested on DK-1S10. Neverthelse
-it should work as far as possible, because the DK-1S10 port is
-more than ninetieth percents equal to the DK-1C20 port and at
-this platform the hello_world example was already tested
-successfully (see README.dk1c20).
-
-
-5. Programming U-Boot into FLASH with GERMS
-============================================
-The current version of the DK-1S10 port with the default
-configuration settings occupies about 78 KBytes of flash.
-A minimal configuration occupies less than 60 KByte
-(network support disabled).
-
-To program U-Boot into the DK-1S10 flash using GERMS do the
-following:
-
-1. From the command line, download U-Boot using the nios-run:
-
- $ nios-run -r u-boot.srec
-
-This takes about 45 seconds (GERMS is not very speedy here).
-After u-boot is downloaded it will be executed. You should
-see the following:
-
- U-Boot 1.0.2 (Jan 28 2004 - 19:02:30)
-
- CPU: Nios-32 Rev. 3.3 (0x3038)
- Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14
- Board: Altera Nios 1S10 Development Kit
- In: serial
- Out: serial
- Err: serial
- DK1S10 >
-
-
-2. Quit nios-run and start your terminal application (e.g. start
- Hyperterminal or minicom).
-
-3. Download the u-boot code to RAM. When using Hyperterminal, do the
- following:
-
- a. From the u-boot command prompt start a binary download to
- SRAM / SDRAM:
-
- at the Altera Standard 32 to SRAM:
-
- ==> loadb 800000
-
- at the Microtronix LDK 2.0 to SDRAM:
-
- ==> loadb 1010000
-
- b. Download u-boot.bin using kermit.
-
-4. From the U-Boot command prompt, erase flash:
-
- at the Altera Standard 32 from 0x40000 to 0x5ffff:
-
- ==> erase 1:4-5
-
- at the Microtronix LDK 2.0 from 0x8000000 to 0x81ffff:
-
- ==> erase 1:0-1
-
-5. Copy the binary image from SRAM / SDRAM to flash:
-
- at the Altera Standard 32 to SRAM:
-
- ==> cp.b 800000 40000 ${filesize}
-
- at the Microtronix LDK 2.0 to SDRAM:
-
- ==> cp.b 1010000 8000000 ${filesize}
-
-U-Boot will now automatically start when the board is powered on or
-reset using the Standard-32 configuration. To start U-Boot with the
-Safe-32 configuration, enter the following GERMS command:
-
- + g 40000
diff --git a/doc/README.dk1s10_mldk20 b/doc/README.dk1s10_mldk20
deleted file mode 100644
index 74e07a9..0000000
--- a/doc/README.dk1s10_mldk20
+++ /dev/null
@@ -1,286 +0,0 @@
-
-TODO: specify IDE i/f
-
-
-===============================================================================
- C P U , M E M O R Y , I N / O U T C O M P O N E N T S
-===============================================================================
-see also [1]-[5]
-
-CPU: "LDK2"
- 32 bit NIOS for 75 MHz
- 512 Byte for register file (30 levels)
- with out instruction cache
- with out data cache
- 2 KByte On Chip ROM with GERMS boot monitor
- with out On Chip RAM
- MSTEP multiplier
- no Debug Core
- no On Chip Instrumentation (OCI)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 75000000
- CONFIG_SYS_NIOS_CPU_ICACHE = (not present)
- CONFIG_SYS_NIOS_CPU_DCACHE = (not present)
- CONFIG_SYS_NIOS_CPU_REG_NUMS = 512
- CONFIG_SYS_NIOS_CPU_MUL = 0
- CONFIG_SYS_NIOS_CPU_MSTEP = 1
- CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
-
-IRQ: Nr. | used by
- ------+--------------------------------------------------------
- 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
- 17 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 17
- 18 | UART1 | CONFIG_SYS_NIOS_CPU_UART1_IRQ = 18
- 20 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 20
- 25 | IDE0 | CONFIG_SYS_NIOS_CPU_IDE0_IRQ = 25
-
-MEMORY: 8 MByte Flash
- 16 MByte SDRAM
-
-Timer: TIMER0: high priority programmable timer (IRQ16)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 0
- CONFIG_SYS_NIOS_CPU_USER_TIMER = (not present)
-
-PIO: Nr. | description
- ------+--------------------------------------------------------
- PIO0 | CFPOWER: 1 output to controll CF power supply
- PIO1 | BUTTON: 4 inputs for user push buttons (no IRQ)
- ------+--------------------------------------------------------
- not | LCD: 11 in/outputs for ASCII LCD
- pres.| LED: 8 outputs for user LEDs
- | SEVENSEG: 16 outputs for user seven segment display
- | RECONF: 1 in/output for . . . . . . . . . . . .
- | CFPRESENT: 1 input for CF present event (IRQ35)
- | CFATASEL: 1 output to controll CF ATA card select
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 1
- CONFIG_SYS_NIOS_CPU_LCD_PIO = (not present)
- CONFIG_SYS_NIOS_CPU_LED_PIO = (not present)
- CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = (not present)
- CONFIG_SYS_NIOS_CPU_RECONF_PIO = (not present)
- CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = (not present)
- CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 0
- CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = (not present)
-
-UART: UART0: fixed baudrate of 115200, fixed protocol 8N2,
- without handshake RTS/CTS (IRQ17)
- UART1: fixed baudrate of 115200, fixed protocol 8N1,
- without handshake RTS/CTS (IRQ18)
-
-LAN: SMsC LAN91C111 with:
- - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
- - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
-
-IDE: (TODO)
-
-
-===============================================================================
- M E M O R Y M A P
-===============================================================================
-
-- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - -
-
- 0x02000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_STACK
- 0x02000000 --+32-----------16|15------------0+
- | . | \ \
- | . | | |
- | . | | > stack area
- | . | | |
- | . | | V
- | . | |
- | . | |
- SDRAM | . | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
- | . | | = 0x01000000
- | . | |
- 0x01000100 |- - - - - - - - - - - - - - - -+-|-
- | . | | \
- | . | | |
- | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
- | . | | | = 0x00000100
- | | / /
- 0x01000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE
- 0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE
- | sector 127 | \
- + 0x7f0000 |- - - - - - - - - - - - - - - -| |
- | : | |
- Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
- | sector 1 : | | = 0x00800000
- + 0x010000 |- - - - - - - - - - - - - - - -| |
- | sector 0 (size = 0x10000) | /
- 0x00800000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00020000 ---32-----------16|15------------0-
- | gap | \
- 0x00010310 --+-------------------------------| |
- | | |
- | register bank (size = 0x10) | |
- | +--------.---.---.--- | |
- | | bank 0 \ 1 \ 2 \ 3 \ | |
- | |---------------------------+ | |
- LAN91C111 | | BANK | RESERVED | | |
- | |- - - - - - -|- - - - - - -| | > na_enet_size
- | | RPCR | MIR | | | = 0x00010000
- | |- - - - - - -|- - - - - - -| | |
- | | COUNTER | RCR | | |
- | |- - - - - - -|- - - - - - -| | |
- | | EPH STATUS | TCR | | |
- | +---------------------------+ | |
- 0x00010300 --+--LAN91C111_REGISTERS_OFFSET---| |
- | gap | /
- 0x00010000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00000980 ---32-----------16|15------------0-
- | | | \
- : (real size : : |
- IDE i/f : and content : : > 0x00000080
- [5] : unknown) : : |
- | | | /
- 0x00000900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
- | | \
- : gap : > (space for PIO4..7)
- | | /
- 0x000008c0 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART1 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x000008a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART1
- | | \
- : gap : > (space for PIO2..3)
- | | /
- 0x00000880 ---32-----------16|15------------0-
- | edgecapture (4 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO1 | interruptmask (4 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (4 bit) (ro) | /
- 0x00000870 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO0 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x00000860 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | snaph (16 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER0 | snapl (16 bit) (rw) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | periodh (16 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | periodl (16 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x00000840 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
- | | \
- : gap : > (space for UART2)
- | | /
- 0x00000820 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00000800 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
-
- 0x00000800 ---32-----------16|15------------0-
- | : | \
- | : | |
- GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
- | : | | = 0x00000800
- | : | /
- 0x00000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
- 0x00000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-===============================================================================
- F L A S H M E M O R Y A L L O C A T I O N
-===============================================================================
-
- 0x01000000 ---8-------------4|3-------------0-
- | : | \
- SAFE | : | > 1 MByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00f00000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- USER | : | > 1 MByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00e00000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- WEB pages | : | > 2 MByte
- | : | | (provisory usable)
- | : | /
- 0x00c00000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- | : | |
- | : | > 4 MByte free for use
- | : | |
- 0x00840000 --+- - - - - - - -:- - - - - - - -+-|- u-boot environment
- | : | /
- 0x00800000 |- - - - - - - -:- - - - - - - -+- - u-boot _start()
- 0x00800000 ---8-------------4|3-------------0-
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5] http://www.opencores.org/projects/ata/
- http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1s10_std32 b/doc/README.dk1s10_std32
deleted file mode 100644
index 622b2b9..0000000
--- a/doc/README.dk1s10_std32
+++ /dev/null
@@ -1,354 +0,0 @@
-
-TODO: specify IDE i/f
- specify OCI
-
-
-===============================================================================
- C P U , M E M O R Y , I N / O U T C O M P O N E N T S
-===============================================================================
-see also [1]-[5]
-
-CPU: "standard_32"
- 32 bit NIOS for 50 MHz
- 256 Byte for register file (15 levels)
- 4 KByte instruction cache (4 bytes in each cache line)
- 4 KByte data cache (4 bytes in each cache line)
- 2 KByte On Chip ROM with GERMS boot monitor
- 64 KByte On Chip RAM
- MSTEP multiplier
- no Debug Core
- On Chip Instrumentation (OCI) enabled
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
- CONFIG_SYS_NIOS_CPU_ICACHE = 4096
- CONFIG_SYS_NIOS_CPU_DCACHE = 4096
- CONFIG_SYS_NIOS_CPU_REG_NUMS = 256
- CONFIG_SYS_NIOS_CPU_MUL = 0
- CONFIG_SYS_NIOS_CPU_MSTEP = 1
- CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
-
-OCI: (TODO)
-
-IRQ: Nr. | used by
- ------+--------------------------------------------------------
- 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
- 25 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 25
- 30 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 30
- 35 | PIO5 | CONFIG_SYS_NIOS_CPU_PIO5_IRQ = 35
- 40 | PIO0 | CONFIG_SYS_NIOS_CPU_PIO0_IRQ = 40
- 50 | TIMER1 | CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
-
-MEMORY: 8 MByte Flash
- 1 MByte SRAM
- 16 MByte SDRAM
-
-Timer: TIMER0: high priority programmable timer (IRQ16)
- TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 1
- CONFIG_SYS_NIOS_CPU_USER_TIMER = 0
-
-PIO: Nr. | description
- ------+--------------------------------------------------------
- PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40)
- PIO1 | LCD: 11 in/outputs for ASCII LCD
- PIO2 | LED: 8 outputs for user LEDs
- PIO3 | SEVENSEG: 16 outputs for user seven segment display
- PIO4 | RECONF: 1 in/output for . . . . . . . . . . . .
- PIO5 | CFPRESENT: 1 input for CF present event (IRQ35)
- PIO6 | CFPOWER: 1 output to controll CF power supply
- PIO7 | CFATASEL: 1 output to controll CF ATA card select
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 0
- CONFIG_SYS_NIOS_CPU_LCD_PIO = 1
- CONFIG_SYS_NIOS_CPU_LED_PIO = 2
- CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 3
- CONFIG_SYS_NIOS_CPU_RECONF_PIO = 4
- CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = 5
- CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 6
- CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = 7
-
-UART: UART0: fixed baudrate of 115200, fixed protocol 8N1,
- without handshake RTS/CTS (IRQ25)
-
-LAN: SMsC LAN91C111 with:
- - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
- - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
-
-IDE: (TODO)
-
-
-===============================================================================
- M E M O R Y M A P
-===============================================================================
-
-- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - -
-
- 0x02000000 ---32-----------16|15------------0-
- | : | \
- | : | |
- SDRAM | : | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
- | : | | = 0x01000000
- | : | /
- 0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00920a80 ---32-----------16|15------------0-
- | | | \
- : (real size : : |
- IDE i/f : and content : : > 0x00000080
- [5] : unknown) : : |
- | | | /
- 0x00920a00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER1 | (unused) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | (unused) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (1 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x009209e0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER1
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO7 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x009209d0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO6 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x009209c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO5 | interruptmask (1 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x009209b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO4 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (1 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (rw) | /
- 0x009209a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO3 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (16 bit) (wo) | /
- 0x00920990 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO2 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (8 bit) (wo) | /
- 0x00920980 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO1 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (11 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (11 bit) (rw) | /
- 0x00920970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
- | edgecapture (4 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO0 | interruptmask (4 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (4 bit) (ro) | /
- 0x00920960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | snaph (16 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER0 | snapl (16 bit) (rw) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | periodh (16 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | periodl (16 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x00920940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
- | | \
- : gap : > (space for UART1)
- | | /
- 0x00920920 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00920900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - -
-
- 0x00920900 -----------------------------------
- | | \
- : (real size : |
- OCI Debug : and content : > CONFIG_SYS_NIOS_CPU_OCI_SIZE
- : unknown) : | = 0x00000100
- | | /
- 0x00920800 ----------------------------------- CONFIG_SYS_NIOS_CPU_OCI_BASE
-
-- - - - - - - - - - - on chip memory 2 - - - - - - - - - - -
-
- 0x00920800 ---32-----------16|15------------0-
- | : | \
- | : | |
- GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
- | : | | = 0x00000800
- | : | /
- 0x00920000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
- 0x00920000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
-
- 0x00920000 ---32-----------16|15------------0-
- | gap | \
- 0x00910310 --+-------------------------------| |
- | | |
- | register bank (size = 0x10) | |
- | +--------.---.---.--- | |
- | | bank 0 \ 1 \ 2 \ 3 \ | |
- | |---------------------------+ | |
- LAN91C111 | | BANK | RESERVED | | |
- | |- - - - - - -|- - - - - - -| | > na_lan91c111_size
- | | RPCR | MIR | | | = 0x00010000
- | |- - - - - - -|- - - - - - -| | |
- | | COUNTER | RCR | | |
- | |- - - - - - -|- - - - - - -| | |
- | | EPH STATUS | TCR | | |
- | +---------------------------+ | |
- 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
- | gap | /
- 0x00910000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
-
-- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
-
- 0x00910000 ---32-----------16|15------------0-
- | : | \
- | : | |
- onchip RAM | : | > CONFIG_SYS_NIOS_CPU_RAM_SIZE
- | : | | = 0x00010000
- | : | /
- 0x00900000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_RAM_BASE
-
-- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - -
-
- 0x00900000 ---32-----------16|15------------0-
- 0x00900000 --+32-----------16|15------------0+
- | . | \ \
- | . | | |
- | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
- | . | | | = 0x00000100
- | . | | /
- 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
- 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
- | . | | \
- | . | | |
- | . | | > stack area
- | . | | |
- | . | | V
- | . | |
- SRAM | . | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
- | . | | = 0x00100000
- | | /
- 0x00800000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
- 0x00800000 ---8-------------4|3-------------0-
- | sector 127 | \
- + 0x7f0000 |- - - - - - - - - - - - - - - -| |
- | : | |
- Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
- | sector 1 : | | = 0x00800000
- + 0x010000 |- - - - - - - - - - - - - - - -| |
- | sector 0 (size = 0x10000) | /
- 0x00000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
-
-
-===============================================================================
- F L A S H M E M O R Y A L L O C A T I O N
-===============================================================================
-
- 0x00800000 ---8-------------4|3-------------0-
- | : | \
- SAFE | : | > 1 MByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00700000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- USER | : | > 1 MByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00600000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- WEB pages | : | > 2 MByte
- | : | | (provisory usable)
- | : | /
- 0x00400000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- | : | |
- | : | > 4 MByte free for use
- | : | |
- 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
- | : | /
- 0x00000000 |- - - - - - - -:- - - - - - - -+- - u-boot environment
- 0x00000000 ---8-------------4|3-------------0-
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5] http://www.opencores.org/projects/ata/
- http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1s40_std32 b/doc/README.dk1s40_std32
deleted file mode 100644
index 9a0ea06..0000000
--- a/doc/README.dk1s40_std32
+++ /dev/null
@@ -1,355 +0,0 @@
-
-TODO: specify IDE i/f
- specify OCI
-
-
-===============================================================================
- C P U , M E M O R Y , I N / O U T C O M P O N E N T S
-===============================================================================
-see also [1]-[5]
-
-CPU: "standard_32"
- 32 bit NIOS for 50 MHz
- 256 Byte for register file (15 levels)
- 4 KByte instruction cache (4 bytes in each cache line)
- 4 KByte data cache (4 bytes in each cache line)
- 2 KByte On Chip ROM with GERMS boot monitor
- 64 KByte On Chip RAM
- MSTEP multiplier
- no Debug Core
- On Chip Instrumentation (OCI) enabled
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
- CONFIG_SYS_NIOS_CPU_ICACHE = 4096
- CONFIG_SYS_NIOS_CPU_DCACHE = 4096
- CONFIG_SYS_NIOS_CPU_REG_NUMS = 256
- CONFIG_SYS_NIOS_CPU_MUL = 0
- CONFIG_SYS_NIOS_CPU_MSTEP = 1
- CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
-
-OCI: (TODO)
-
-IRQ: Nr. | used by
- ------+--------------------------------------------------------
- 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
- 25 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 25
- 30 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 30
- 35 | PIO5 | CONFIG_SYS_NIOS_CPU_PIO5_IRQ = 35
- 40 | PIO0 | CONFIG_SYS_NIOS_CPU_PIO0_IRQ = 40
- 50 | TIMER1 | CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
-
-MEMORY: 8 MByte Flash
- 1 MByte SRAM
- 16 MByte SDRAM
-
-Timer: TIMER0: high priority programmable timer (IRQ16)
- TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 1
- CONFIG_SYS_NIOS_CPU_USER_TIMER = 0
-
-PIO: Nr. | description
- ------+--------------------------------------------------------
- PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40)
- PIO1 | LCD: 11 in/outputs for ASCII LCD
- PIO2 | LED: 8 outputs for user LEDs
- PIO3 | SEVENSEG: 16 outputs for user seven segment display
- PIO4 | RECONF: 1 in/output for . . . . . . . . . . . .
- PIO5 | CFPRESENT: 1 input for CF present event (IRQ35)
- PIO6 | CFPOWER: 1 output to controll CF power supply
- PIO7 | CFATASEL: 1 output to controll CF ATA card select
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 0
- CONFIG_SYS_NIOS_CPU_LCD_PIO = 1
- CONFIG_SYS_NIOS_CPU_LED_PIO = 2
- CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 3
- CONFIG_SYS_NIOS_CPU_RECONF_PIO = 4
- CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = 5
- CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 6
- CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = 7
-
-UART: UART0: fixed baudrate of 115200, fixed protocol 8N1,
- without handshake RTS/CTS (IRQ25)
-
-LAN: SMsC LAN91C111 with:
- - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
- - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
-
-IDE: (TODO)
-
-
-===============================================================================
- M E M O R Y M A P
-===============================================================================
-
-- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - -
-
- 0x02000000 ---32-----------16|15------------0-
- | : | \
- | : | |
- SDRAM | : | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
- | : | | = 0x01000000
- | : | /
- 0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00920a80 ---32-----------16|15------------0-
- | | | \
- : (real size : : |
- IDE i/f : and content : : > 0x00000080
- [5] : unknown) : : |
- | | | /
- 0x00920a00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER1 | (unused) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | (unused) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (1 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x009209e0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER1
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO7 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x009209d0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO6 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x009209c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO5 | interruptmask (1 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x009209b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO4 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (1 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (rw) | /
- 0x009209a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO3 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (16 bit) (wo) | /
- 0x00920990 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO2 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (8 bit) (wo) | /
- 0x00920980 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO1 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (11 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (11 bit) (rw) | /
- 0x00920970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
- | edgecapture (4 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO0 | interruptmask (4 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (4 bit) (ro) | /
- 0x00920960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | snaph (16 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER0 | snapl (16 bit) (rw) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | periodh (16 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | periodl (16 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x00920940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
- | | \
- : gap : > (space for UART1)
- | | /
- 0x00920920 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00920900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - -
-
- 0x00920900 -----------------------------------
- | | \
- : (real size : |
- OCI Debug : and content : > CONFIG_SYS_NIOS_CPU_OCI_SIZE
- : unknown) : | = 0x00000100
- | | /
- 0x00920800 ----------------------------------- CONFIG_SYS_NIOS_CPU_OCI_BASE
-
-- - - - - - - - - - - on chip memory 2 - - - - - - - - - - -
-
- 0x00920800 ---32-----------16|15------------0-
- | : | \
- | : | |
- GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
- | : | | = 0x00000800
- | : | /
- 0x00920000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
- 0x00920000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
-
- 0x00920000 ---32-----------16|15------------0-
- | gap | \
- 0x00910310 --+-------------------------------| |
- | | |
- | register bank (size = 0x10) | |
- | +--------.---.---.--- | |
- | | bank 0 \ 1 \ 2 \ 3 \ | |
- | |---------------------------+ | |
- LAN91C111 | | BANK | RESERVED | | |
- | |- - - - - - -|- - - - - - -| | > na_lan91c111_size
- | | RPCR | MIR | | | = 0x00010000
- | |- - - - - - -|- - - - - - -| | |
- | | COUNTER | RCR | | |
- | |- - - - - - -|- - - - - - -| | |
- | | EPH STATUS | TCR | | |
- | +---------------------------+ | |
- 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
- | gap | /
- 0x00910000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
-
-- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
-
- 0x00910000 ---32-----------16|15------------0-
- | : | \
- | : | |
- onchip RAM | : | > CONFIG_SYS_NIOS_CPU_RAM_SIZE
- | : | | = 0x00010000
- | : | /
- 0x00900000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_RAM_BASE
-
-- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - -
-
- 0x00900000 ---32-----------16|15------------0-
- 0x00900000 --+32-----------16|15------------0+
- | . | \ \
- | . | | |
- | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
- | . | | | = 0x00000100
- | . | | /
- 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
- 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
- | . | | \
- | . | | |
- | . | | > stack area
- | . | | |
- | . | | V
- | . | |
- SRAM | . | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
- | . | | = 0x00100000
- | | /
- 0x00800000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
- 0x00800000 ---8-------------4|3-------------0-
- | sector 127 | \
- + 0x7f0000 |- - - - - - - - - - - - - - - -| |
- | : | |
- Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
- | sector 1 : | | = 0x00800000
- + 0x010000 |- - - - - - - - - - - - - - - -| |
- | sector 0 (size = 0x10000) | /
- 0x00000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
-
-
-===============================================================================
- F L A S H M E M O R Y A L L O C A T I O N
-===============================================================================
-
- 0x00800000 ---8-------------4|3-------------0-
- | : | \
- | : | |
- SAFE | : | > 2 MByte
- FPGA conf. | : | | (NOT usable by software)
- | : | /
- 0x00600000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- USER | : | > 2 MByte
- FPGA conf. | : | | (NOT usable by software)
- | : | /
- 0x00400000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- WEB pages | : | > 2 MByte
- | : | | (provisory usable)
- | : | /
- 0x00200000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- | : | > 2 MByte free for use
- 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
- | : | /
- 0x00000000 ---8-------------4|3-------------0-
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s40.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5] http://www.opencores.org/projects/ata/
- http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk20k200_std32 b/doc/README.dk20k200_std32
deleted file mode 100644
index fc2d2a3..0000000
--- a/doc/README.dk20k200_std32
+++ /dev/null
@@ -1,242 +0,0 @@
-
-===============================================================================
- C P U , M E M O R Y , I N / O U T C O M P O N E N T S
-===============================================================================
-see also [1]-[4]
-
-CPU: "standard_32"
- 32 bit NIOS for 33.333 MHz (nasys_clock_freq = 33333000)
- 256 Byte for register file (15 levels)
- no instruction cache
- no data cache
- 1 KByte On Chip ROM with GERMS boot monitor
- no On Chip RAM
- MSTEP multiplier
- no Debug Core
- no On Chip Instrumentation (OCI) enabled
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
- CONFIG_SYS_NIOS_CPU_ICACHE = 0
- CONFIG_SYS_NIOS_CPU_DCACHE = 0
- CONFIG_SYS_NIOS_CPU_REG_NUMS = 256
- CONFIG_SYS_NIOS_CPU_MUL = 0
- CONFIG_SYS_NIOS_CPU_MSTEP = 1
- CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
-
-IRQ: Nr. | used by
- ------+--------------------------------------------------------
- 25 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 25
- 26 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 26
- 27 | PIO2 | CONFIG_SYS_NIOS_CPU_PIO2_IRQ = 27
- 28 | UART1 | CONFIG_SYS_NIOS_CPU_UART1_IRQ = 28 (debug)
-
-MEMORY: 1 MByte Flash
- 256 KByte SRAM
- (SDRAM with standard SODIMM only)
-
-Timer: TIMER0: high priority programmable timer (IRQ25)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 0
-
-PIO: Nr. | description
- ------+--------------------------------------------------------
- PIO0 | SEVENSEG: 16 outputs for user seven segment display
- PIO1 | LED: 8 outputs for user LEDs
- PIO2 | BUTTON: 4 inputs for user push buttons (IRQ27)
- PIO3 | LCD: 11 in/outputs for ASCII LCD
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 0
- CONFIG_SYS_NIOS_CPU_LED_PIO = 1
- CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 2
- CONFIG_SYS_NIOS_CPU_LCD_PIO = 3
-
-UART: UART0: fixed baudrate of 115200, fixed protocol 8N2,
- without handshake RTS/CTS (IRQ26)
- UART1: fixed baudrate of 115200, fixed protocol 8N1,
- without handshake RTS/CTS (IRQ28)
-
-
-===============================================================================
- M E M O R Y M A P
-===============================================================================
-
-- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - -
-
- 0x00200000 ---15------------8|7-------------0-
- | sector 18 | \
- + 0x0f0000 |- - - - - - - - - - - - - - - -| |
- | : | |
- Flash |- - - - : - - - -| |
- | sector 5 : | |
- + 0x020000 |- - - - - - - - -| |
- | sector 4 (size = 0x10000) | |
- + 0x010000 |- - - - - - - - - - - - - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
- | sector 3 (size = 0x08000) | | = 0x00100000
- + 0x008000 |- - - - - - - - - - - - - - - -| |
- | sector 2 (size = 0x02000) | |
- + 0x006000 |- - - - - - - - - - - - - - - -| |
- | sector 1 (size = 0x02000) | |
- + 0x004000 |- - - - - - - - - - - - - - - -| |
- | sector 0 (size = 0x04000) | /
- 0x00100000 ---15------------8|7-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
- | |
- : gap :
- | |
- 0x00080000 ---32-----------16|15------------0-
- 0x00080000 --+32-----------16|15------------0+
- | . | \ \
- | . | | |
- | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
- | . | | | = 0x00000100
- | . | | /
- 0x0007ff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
- 0x0007ff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
- | . | | \
- | . | | |
- | . | | > stack area
- | . | | |
- | . | | V
- | . | |
- SRAM | . | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
- | . | | = 0x00040000
- | | /
- 0x00040000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00000400 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART1 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x000004c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART1
- | |
- : gap :
- | |
- 0x00000490 ---32-----------16|15------------0-
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO3 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (11 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (11 bit) (rw) | /
- 0x00000480 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
- | edgecapture (12 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO2 | interruptmask (12 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (12 bit) (ro) | /
- 0x00000470 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO1 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (2 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (2 bit) (rw) | /
- 0x00000460 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | snaph (16 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER0 | snapl (16 bit) (rw) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | periodh (16 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | periodl (16 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x00000440 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO0 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (16 bit) (wo) | /
- 0x00000420 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00000400 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - - on chip memory - - - - - - - - - - -
-
- 0x00000400 ---32-----------16|15------------0-
- | : | \
- | : | |
- GERMS | : | > na_boot_monitor_rom_size
- | : | | = 0x00000400
- | : | /
- 0x00000000 |- - - - - - - - - - - - - - - -+- - nasys_reset_address
- 0x00000000 ---32-----------16|15------------0- na_boot_monitor_rom
-
-
-===============================================================================
- F L A S H M E M O R Y A L L O C A T I O N
-===============================================================================
-
- 0x00200000 ---15------------8|7-------------0-
- | : | \
- SAFE | : | > 256 KByte
- FPGA conf. | : | / (NOT usable by software)
- 0x001c0000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- USER | : | > 256 KByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00180000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- | : | > 512 KByte free for use
- 0x00140000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
- | : | /
- 0x00100000 ---15------------8|7-------------0-
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/ds/ds_nios_board_apex_20k200e.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.nios b/doc/README.nios
deleted file mode 100644
index 5628144..0000000
--- a/doc/README.nios
+++ /dev/null
@@ -1,366 +0,0 @@
-
- U-Boot for Nios-32
-
- Last Update: February 1, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the Altera
-Nios CPU. For information regarding U-Boot and the Nios Development
-Kits see:
-
- * Cyclone Edition (DK-1C20), see doc/README.dk1c20
- * Stratix Edition (DK-1S10), see doc/README.dk1s10 (TODO)
- * Stratix Edition (DK-1S40), see doc/README.dk1s40 (TODO)
- * Stratix Edition (DK-20K200), see doc/README.dk20k200 (TODO)
-
-For informations regarding Nios Development Kit hardware overview
-and the NIOS CPU standard configuration of all known boards made by
-Altera see:
-
- * Development Kit (DK) hardware overview, see doc/README.nios_DK
- * NIOS CPU standard_32 at DK-1C20, see doc/README.dk1c20_std32
- * NIOS CPU standard_32 at DK-1S10, see doc/README.dk1s10_std32
- * NIOS CPU standard_32 at DK-1S40, see doc/README.dk1s40_std32
- * NIOS CPU standard_32 at DK-20K200, see doc/README.dk20k200_std32
-
-For those interested in contributing ... see HELP WANTED below.
-
-
-1. OVERVIEW
-------------
-
-U-Boot has been successfully tested on the Nios Cyclone development
-board using both the 'safe' and 'standard 32' configurations with
-Nios CPU revision 3.1 (CPU_ID = 0x3018). U-Boot can be used with
-or without the GERMS monitor. The initial version of U-Boot for the
-Cyclone development kit is about 60 Kbyte and will fit in a single
-sector of on-board FLASH. Only the Nios 32-bit CPU is supported.
-
-1.1 GERMS Monitor
-------------------
-If GERMS is just not enough, then U-Boot is a great antibiotic.
-You will be very pleased with its high degree of configurability
-and its rich feature set.
-
-A few of the most obvious limitations of GERMS are overcome by
-using U-Boot (See 'Brain Damage'). Most notably, you can use
-minicom or Hyperterminal (duh).
-
-1.2 Altera Source Code
------------------------
-The Nios port does NOT include ANY sources that Altera has the
-copyright. This was a conscious decision ... not an accident.
-The Altera license is not clear in terms of distributing Altera
-sources (when altera silicon is not involved). This isn't really
-a problem as little, if any, of the Altera source contains
-features that are not already available in U-Boot.
-
-1.3 Debugging via OCI
----------------------
-The Nios port supports debugging with gdb and/or nios-console
-via the JTAG port. Stubs for debugging with gdb via the serial
-port are not currently implemented.
-
-
-2. CONFIGURATION OPTIONS/SETTINGS
-----------------------------------
-
-2.1 Nios-specific Options/Settings
------------------------------------
-All configuration options/settings that are specific to Nios begin
-with "CONFIG_NIOS_", "CONFIG_SYS_NIOS_", or "CONFIG_SYS_NIOS_CPU_".
-
-The configuration follows a two-stage process. In the first stage
-the NIOS CPU core will defined like defined in Alteras SOPC Builder.
-At this point we use the "CONFIG_SYS_NIOS_CPU_" defines exclusively. For
-more informations about all the definitions you have to setup see
-into current board configurations and doc/README.nios_CFG_NIOS_CPU.
-
-In second stage we bring the NIOS CPU configuration in relation to
-U-Boot configuration options/settings. The following is a list of
-currently defined Nios-specific options/parameters used inside of
-U-Boot. If any options are related to Standard-32 Nios SDK
-excalibur.h definitions, the related definition follows the
-description).
-
-CONFIG_NIOS -- defined for all Nios-32 boards.
-
-CONFIG_SYS_NIOS_CONSOLE -- the base address of the console UART or the JTAG
- stdio port. To enable a console via JTAG, define
- CONFIG_CONSOLE_JTAG and set CGF_NIOS_CONSOLE to the base address
- of the JTAG stdio port (normally OCI base + 0x00fa). Then
- run nios-console with the -w option.
- (standard-32: nasys_uart_0 resp. na_uart1_base).
-
-CONFIG_SYS_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud
- parameter is set to '1'.
-
-CONFIG_SYS_NIOS_MULT_HW -- use full hardware multiply (not yet implemented).
-
-CONFIG_SYS_NIOS_MULT_MSTEP -- use hardware assisted multiply using the
- MSTEP instruction (not yet implemented).
-
-CONFIG_SYS_NIOS_TMRBASE -- the base address of the timer used to support
- xxx_timer routines (e.g. set_timer(), get_timer(), etc.).
- (standard-32: nasys_timer_1 resp. na_lo_priority_timer2_base).
-
-CONFIG_SYS_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to
- the timer. (standard-32: nasys_timer_1_irq resp.
- na_low_priority_timer2_irq).
-
-CONFIG_SYS_NIOS_TMRMS -- the period of the timer in milliseconds.
-
-CONFIG_SYS_NIOS_TMRCNT -- the preloadable counter value for the timer if it has
- no fixed period.
-
-CONFIG_SYS_NIOS_ASMIBASE -- the base address of the ASMI peripheral.
- (standard-32: na_asmi_base).
-
-CONFIG_SYS_NIOS_SPIBASE -- the base address of the SPI master (!) peripheral.
- (nasys_spi_0)
-
-CONFIG_SYS_NIOS_SPIBITS -- the amount of configured SPI data bits in PTF.
- This value can be 8 or 16 only! (PTF: databits)
-
-
-2.2 Differences in U-Boot Options/Settings
--------------------------------------------
-Some 'standard' U-Boot options/settings are treated differently in
-the Nios port. These are described below.
-
-CONFIG_SYS_GBL_DATA_OFFSET -- in the Nios port, this is the offset of the
- global data structure in the Nios memory space. More simply,
- the address of global data.
-
-
-3. ASSEMBLY CODING
--------------------
-
-In browsing the assembly source files, you may notice the absence
-of the 'magic macros' (e.g. MOVIA, MOVIP, ADDIP etc.). This is
-deliberate. The documentation for the magic macros is scant and
-it is hard to find ... it does not appear in the Nios programmer's
-manual, nor does it appear in the assembler manual. Regardless,
-the macros actually do very little to improve readability anyway.
-
-With this in mind, all assembler modules use only instructions that
-appear in the Nios programmer's manual OR are directly supported
-by the nios-elf toolchain. For example, the 'dec %rB' instruction
-is an alias for 'subi %rB,1' that is supported by the assembler
-but does not appear in the programmer's manual.
-
-
-4. BOOT PROCESS
----------------
-
-4.1 Boot process over GERMS
----------------------------
-When the NIOS CPU catch a reset signal it will begin to be running
-code from CONFIG_SYS_NIOS_CPU_RST_VECT. Normally at this place it will
-find the GERMS monitor. That's the case for the generic NIOS CPU
-configuration "standard_32". When the GERMS monitor starts running,
-it performs important system initializations and then looks for
-executable code in flash, using the following steps:
-
- 1. Examining the two bytes at CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x04000C.
- 2. Examining the button 0 on the PIO CONFIG_SYS_NIOS_CPU_BUTTON_PIO.
- 3. If the button is not pressed and the two bytes contain 'N'
- and 'i', the monitor executes a CALL to location
- CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x040000.
- 4. If the code is not executed in step 3 or the code returns,
- then prints an 8-digit version number to STDOUT and waits for
- user commands from STDIN.
-
-In normal case, for "standard_32", STDIN and STDOUT are the first
-serial port.
-
-4.2 Return to GERMS command line
---------------------------------
-During the boot process, the GERMS monitor checks for the existence
-of application software in flash memory. If found, the processor
-immediately executes the code. To return program execution to the
-GERMS monitor (that is, avoid running code stored in flash memory):
-
- 1. Hold down CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0.
- 2. Press then release the CPU reset button.
- 3. Release CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0.
-
-
-5. DEBUGGING WITH GDB
----------------------
-
-Debug sessions using gdb are currently supported only via JTAG. The
-stubs for debugging via a serial port are not implemented. To enable
-the gdb JTAG stubs, simply reference _brkpt_hw_int and _brkpt_sw_int
-at vector table offsets 3 and 4, respectively. For an example, see
-board/altera/dk1c20/vectors.S.
-
-5.1 Vector Table Initialization and ROM Stubs
----------------------------------------------
-If CONFIG_ROM_STUBS is defined, the debug breakpoint and single step
-entries in the vector table are restored to their initial values
-immediately _after_ initializing the vector table. Defining this macro
-is useful when ROM-based stubs are implemented.
-
-NOTE: The default GERMS monitor does NOT implement gdb stubs, nor does
-it initialize the vector table. Therefore, when debugging U-Boot, you
-should NOT set a software breakpoint prior to vector table initialization.
-
-5.2 Starting a Debug Session
-----------------------------
-If you're not familiar with gdb, you follow these step-by-step instructions.
-These instructions are NOT the only way to start a debug session, but they
-cover most of the individual functions to get you started.
-
- 1. Start the JTAG gdb server. Open a Nios shell window and start
- the server. When the server is started you must provide the base
- address of the OCI core. For example, when using the Cyclone
- development kit (DK1C20):
-
- $ nios-gdb-server --ocibase=0x00920800 --tcpport=2342
-
- 2. Start gdb. Open a Nios shell window, change to the top-level
- U-Boot directory and start gdb, specifying the u-boot elf file:
-
- $ nios-elf-gdb u-boot
-
- 3. Update target settings. From the file menu, select
- "Target Settings ..." and select the following, then click 'Ok':
-
- Target: Remote/TCP
- Port : 2342 (same as in step 1)
- Display download dialog: checked
- All other check boxes: unchecked
-
- 4. Connect to the target. Select menu: 'Run->Connect to target'.
- You should see a dialog box indicating the you successfully connected
- to the target.
-
- 5. Download U-Boot. Select menu: 'Run->Download'.
-
- 6. Open a gdb console window and set the source directory paths.
- Select menu: 'View->Console'. In the console window, enter the
- following commands, then close the console window:
-
- (gdb) directory common
- (gdb) directory arch/nios/cpu
- (gdb) directory arch/nios/lib
- (gdb) directory board/altera/dk1c20
-
- Note that the last command is for the DK1C20 board only. If you
- are using another board, specify that board's directory.
-
- 7. Open the file board.c (using the file menu in the lower
- left hand corner). Scroll to the board_init() routine and set
- a breakpoint.
-
- 8. Run U-Boot. Just click on the run icon, or select menu:
- 'Run->Run'. U-Boot should start running, then break at your
- breakpoint.
-
- 9. Have fun & start learning more about gdb.
-
-
-5.3 For advanced Users
-----------------------
-A few notes for those more familiar with gdb.
-
- -Serial port stubs are not implemented. Sorry, but it's just not
- worth _my_ effort. The JTAG stubs work great and are ridiculously
- simple to implement.
-
- -If you need to debug the early startup code (prior to the vector
- table initialization), use the nios-console debugger.
-
- - Connect, download & run -- there are some problems here. Connect
- download and run seperately to avoid trouble.
-
-6. BRAIN DAMAGE
-----------------
-
-This section describes some of the unfortunate and avoidable aspects
-of working with the Nios CPU ... and some things you can do to
-reduce your pain.
-
-6.1 GERMS doesn't work with Hyperterminal
-------------------------------------------
-GERMS doesn't do CR/LF mapping that is compatible with Hyperterminal
-(or minicom) -- geez. Regardless of you opion of Hyperterminal, this
-sad design decision is remedied by using U-Boot.
-
-6.2 cygwin Incompatibility
----------------------------
-The version of cygwin distributed with the nios GNUPro toolchain is
-out-of-date and incompatible with the latest cygwin distributions.
-In addition, many of the standard utilities are very dated as well.
-If you try to download and build the lastest version of grep for
-example, you'll quickly realize that a native gcc is not available
-(the next topic) which leads to U-Boot build problems (following
-topic).
-
-The solution ... well, you can wait for Altera ... or build as
-set of tools for linux.
-
-6.3 No native gcc
-------------------
-I'm not sure how this one slipped through the cracks ... but it is
-a real pain. Basically, if you want to build anything for the native
-environment -- forget it! A native (cygwin) gcc is not distributed,
-and the old version of cygwin makes locating one challenging.
-
-The solution ... same as above. Just download the gcc source from
-Altera and build up a set of cross tools for your favorite linux
-distro. Anybody who wants to use an already precompiled NIOS cross
-toolchain can it found in the CDK4NIOS project hosted by Source
-Forge at http://cdk4nios.sourceforge.net.
-
-6.4 Can't build default U-Boot
--------------------------------
-By default, when you build U-Boot you will be building some native
-tools along with the target elf, bin, and srec files. Without a
-native gcc, this (obviously) causes problems.
-
-For developers using the Altera cygwin tools you can remove the
-'tools' directory from SUBDIRS in the top-level Makefile. You will
-also have to edit common/Makefile:
-
-Replace:
-env_embedded.o: env_embedded.c ../tools/envcrc
- $(CC) $(AFLAGS) -Wa,--no-warn \
- -DENV_CRC=$(shell ../tools/envcrc) \
- -c -o $@ env_embedded.c
-
-With:
-env_embedded.o: env_embedded.c
- $(CC) $(AFLAGS) -Wa,--no-warn \
- -DENV_CRC=0 \
- -c -o $@ env_embedded.c
-
-BTW, thats a 'zero' ... not the letter 'O'. And not that the
-"../tools/envcrc" dependency is removed.
-
-
-7. HELP WANTED
----------------
-
-There are plenty of areas where help is needed. Here's are some ideas
-for those interested in contributing:
-
--CompactFlash. Port & test CF/FAT.
-
--Bedbug. Develop bedbug for Nios ... or at least provide a disassemble
- command.
-
--Add boot support for ucLinux (niosnommu).
-
--Implement (don't copy Altera code) the __mulxx routines using the
- MSTEP and MUL instructions (e.g. CONFIG_SYS_NIOS_MULT_HW and CONFIG_SYS_NIOS_MULT_MSTEP).
-
-
-Regards,
-
---Scott
-<smcnutt@psyent.com>
-
---Stephan
-<linz@li-pro.net>
diff --git a/doc/README.nios_CONFIG_SYS_NIOS_CPU b/doc/README.nios_CONFIG_SYS_NIOS_CPU
deleted file mode 100644
index 3547c34..0000000
--- a/doc/README.nios_CONFIG_SYS_NIOS_CPU
+++ /dev/null
@@ -1,140 +0,0 @@
-
-===============================================================================
- C F G _ N I O S _ C P U _ * v s . N I O S S D K
-===============================================================================
-
-When ever you have to make a new NIOS CPU configuration you can use this table
-as a reference list to the original NIOS SDK symbols made by Alteras SOPC
-Builder. Look into excalibur.h and excalibur.s in your SDK path cpu_sdk/inc.
-Symbols beginning with a '[ptf]:' are coming from your SOPC sytem description
-(PTF file) in sections WIZARD_SCRIPT_ARGUMENTS or SYSTEM_BUILDER_INFO.
-
-C O R E N I O S S D K [1],[7]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_CLK nasys_clock_freq
-CONFIG_SYS_NIOS_CPU_ICACHE nasys_icache_size
-CONFIG_SYS_NIOS_CPU_DCACHE nasys_dcache_size
-CONFIG_SYS_NIOS_CPU_REG_NUMS nasys_nios_num_regs
-CONFIG_SYS_NIOS_CPU_MUL __nios_use_multiply__
-CONFIG_SYS_NIOS_CPU_MSTEP __nios_use_mstep__
-CONFIG_SYS_NIOS_CPU_STACK nasys_stack_top
-CONFIG_SYS_NIOS_CPU_VEC_BASE nasys_vector_table
-CONFIG_SYS_NIOS_CPU_VEC_SIZE nasys_vector_table_size
-CONFIG_SYS_NIOS_CPU_VEC_NUMS
-CONFIG_SYS_NIOS_CPU_RST_VECT nasys_reset_address
-CONFIG_SYS_NIOS_CPU_DBG_CORE nasys_debug_core
-CONFIG_SYS_NIOS_CPU_RAM_BASE na_onchip_ram_64_kbytes
-CONFIG_SYS_NIOS_CPU_RAM_SIZE na_onchip_ram_64_kbytes_size
-CONFIG_SYS_NIOS_CPU_ROM_BASE na_boot_monitor_rom
-CONFIG_SYS_NIOS_CPU_ROM_SIZE na_boot_monitor_rom_size
-CONFIG_SYS_NIOS_CPU_OCI_BASE nasys_oci_core
-CONFIG_SYS_NIOS_CPU_OCI_SIZE
-CONFIG_SYS_NIOS_CPU_SRAM_BASE na_ext_ram nasys_program_mem
- nasys_data_mem
-CONFIG_SYS_NIOS_CPU_SRAM_SIZE na_ext_ram_size nasys_program_mem_size
- nasys_data_mem_size
-CONFIG_SYS_NIOS_CPU_SDRAM_BASE na_sdram
-CONFIG_SYS_NIOS_CPU_SDRAM_SIZE na_sdram_size
-CONFIG_SYS_NIOS_CPU_FLASH_BASE na_ext_flash nasys_main_flash
- nasys_am29lv065d_flash_0
- nasys_flash_0
-CONFIG_SYS_NIOS_CPU_FLASH_SIZE na_ext_flash_size nasys_main_flash_size
-
-T I M E R N I O S S D K [3]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_TIMER_NUMS nasys_timer_count
-CONFIG_SYS_NIOS_CPU_TIMER[0-9] nasys_timer_[0-9]
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_IRQ nasys_timer_[0-9]_irq
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_PER [ptf]:period
- [ptf]:period_units
- [ptf]:mult
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_AR [ptf]:always_run
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_FP [ptf]:fixed_period
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_SS [ptf]:snapshot
-
-U A R T N I O S S D K [2]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_UART_NUMS nasys_uart_count
-CONFIG_SYS_NIOS_CPU_UART[0-9] nasys_uart_[0-9]
-CONFIG_SYS_NIOS_CPU_UART[0-9]_IRQ nasys_uart_[0-9]_irq
-CONFIG_SYS_NIOS_CPU_UART[0-9]_BR [ptf]:baud
-CONFIG_SYS_NIOS_CPU_UART[0-9]_DB [ptf]:data_bits
-CONFIG_SYS_NIOS_CPU_UART[0-9]_SB [ptf]:stop_bits
-CONFIG_SYS_NIOS_CPU_UART[0-9]_PA [ptf]:parity
-CONFIG_SYS_NIOS_CPU_UART[0-9]_HS [ptf]:use_cts_rts
-CONFIG_SYS_NIOS_CPU_UART[0-9]_EOP [ptf]:use_eop_register
-
-P I O N I O S S D K [4]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_PIO_NUMS nasys_pio_count
-CONFIG_SYS_NIOS_CPU_PIO[0-9] nasys_pio_[0-9]
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_IRQ nasys_pio_[0-9]_irq
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_BITS [ptf]:Data_Width
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_TYPE [ptf]:has_tri
- [ptf]:has_out
- [ptf]:has_in
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_CAP [ptf]:capture
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_EDGE [ptf]:edge_type
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_ITYPE [ptf]:irq_type
-
-S P I N I O S S D K [6]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_SPI_NUMS nasys_spi_count
-CONFIG_SYS_NIOS_CPU_SPI[0-9] nasys_spi_[0-9]
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_IRQ nasys_spi_[0-9]_irq
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_BITS [ptf]:databits
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_MA [ptf]:ismaster
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_SLN [ptf]:numslaves
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_TCLK [ptf]:targetclock
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_TDELAY [ptf]:targetdelay
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_* [ptf]:*
-
-I D E N I O S S D K
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_IDE_NUMS nasys_usersocket_count
-CONFIG_SYS_NIOS_CPU_IDE[0-9] nasys_usersocket_[0-9]
-
-A S M I N I O S S D K [5]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_ASMI_NUMS nasys_asmi_count
-CONFIG_SYS_NIOS_CPU_ASMI[0-9] nasys_asmi_[0-9]
-CONFIG_SYS_NIOS_CPU_ASMI[0-9]_IRQ nasys_asmi_[0-9]_irq
-
-E t h e r n e t ( L A N ) N I O S S D K
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_LAN_NUMS
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_BASE na_lan91c111
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_OFFS LAN91C111_REGISTERS_OFFSET
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_IRQ na_lan91c111_irq
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_BUSW LAN91C111_DATA_BUS_WIDTH
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_TYPE
-
-s y s t e m c o m p o s i n g N I O S S D K
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_TICK_TIMER (na_low_priority_timer2)
-CONFIG_SYS_NIOS_CPU_USER_TIMER (na_timer1)
-CONFIG_SYS_NIOS_CPU_BUTTON_PIO (na_button_pio)
-CONFIG_SYS_NIOS_CPU_LCD_PIO (na_lcd_pio)
-CONFIG_SYS_NIOS_CPU_LED_PIO (na_led_pio)
-CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO (na_seven_seg_pio)
-CONFIG_SYS_NIOS_CPU_RECONF_PIO (na_reconfig_request_pio)
-CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO (na_cf_present_pio)
-CONFIG_SYS_NIOS_CPU_CFPOWER_PIO (na_cf_power_pio)
-CONFIG_SYS_NIOS_CPU_CFATASEL_PIO (na_cf_ata_select_pio)
-CONFIG_SYS_NIOS_CPU_USER_SPI (na_spi)
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/ds/ds_nioscpu.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf
-[6] http://www.altera.com/literature/ds/ds_nios_spi.pdf
-[7] http://www.altera.com/literature/ds/ds_legacy_sdram_ctrl.pdf
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.nios_DK b/doc/README.nios_DK
deleted file mode 100644
index b119d76..0000000
--- a/doc/README.nios_DK
+++ /dev/null
@@ -1,192 +0,0 @@
-
-===============================================================================
- H A R D W A R E O V E R V I E W
-===============================================================================
-===============|===============|===============|===============|===============
- | DK20K200 | DK1C20 | DK1S10 | DK1S40
----------------|---------------|---------------|---------------|---------------
- | | | |
- Schem. Nr. | Nios Dev.Brd. | P06-08713-00 | P06-08468-01 | P06-09178-00
- Rev. | pilot. | 01 | 01 | 00
- Date | 2001/02/06 | 2003/02/20 | 2003/02/14 | 2003/05/14
-[1] | | | |
-===============|===============|===============|===============|===============
- | | | |
- FPGA | "APEX" | "Cyclon" | "Stratix" | "Stratix"
- | EP20K200E | EP1C20 | EP1S10 | EP1S40
- | | |
- | (484 FBGA) | (400 FBGA) | (780 FBGA)
-[2],[3],[4] | | |
----------------|---------------|---------------|---------------|---------------
- | |
- Clock (OSC) | 33.333 MHz | 50 MHz
- | | (with ext. supply)
- |
- | PI49FCT3805
-[5] |
----------------|---------------|---------------|---------------|---------------
- | |
- Flash | 1 MByte | 8 MByte
- | |
- | AM29LV800BB | AM29LV065DU120REI
- | 8/16 bit bus | 8 bit bus
- | 1 chip | 1 chip
-[6],[7] | |
----------------|---------------|---------------|---------------|---------------
- | | |
- serial | no such | 4 MBits | no such
- Flash | | |
- | | EPCS4SI8 |
-[8] | | |
----------------|---------------|---------------|---------------|---------------
- | |
- Compact | no such, as | see below: prototype adapter
- Flash (CF) | module only |
- | |
----------------|---------------|---------------|---------------|---------------
- | |
- SRAM | 256 KByte | 1 MByte
- | |
- | IDT71V016S | IDT71V416S10PH
- | 32 bit bus | 32 bit bus
- | 2 chips | 2 chips
- | interlaced | interlaced
-[9],[10] | |
----------------|---------------|---------------|---------------|---------------
- | |
- SDRAM | SODIMM only | 16 MByte
- | |
- | | MT48LC4M32B2TG-7
- | 64 bit bus | 32 bit bus
- | | 1 chip
-[11] | |
-===============|===============|===============|===============|===============
- | |
- serial I/O | 1 RS232 | 2 RS232
- | |
- | LTC1386 | MAX3237CAI
- | |
- | port 1: | port 1:
- | RxD / TxD, | RxD / TxD,
- | RTS / CTS | RTS / CTS, DTR / DSR, DCD, RI
- | |
- | ! ! ! ! ! ! | port 2: | port 2:
- | RTS/CTS can | RxD / TxD | RxD / TxD
- | be RxD/TxD | | RTS / CTS, DTR / DSR
- | of 2nd port | | DCD, RI
-[12],[13] | ! ! ! ! ! ! | |
----------------|---------------|---------------|---------------|---------------
- | |
- Ethernet | no such, as | 1 10BaseT / 100BaseT
- | module only |
- | | LAN91C111-NE
- | | 32 bit bus
- | | no external EEPROM
- | | LEDA# for link
- | | LEDB# for Rx / Tx
-[14] | |
-===============|===============|===============|===============|===============
- | |
- user | 8 | no such
- switches | SW[7..0] |
- | |
----------------|---------------|---------------|---------------|---------------
- |
- user push | 4
- buttons | PB[3..0]
- |
----------------|---------------|---------------|---------------|---------------
- | |
- user LEDs | 2 | 8
- | LED[1..0] | LED[7..0]
- | |
----------------|---------------|---------------|---------------|---------------
- |
- user seven | 2
- segment | HEX[1..0][G..A,DP]
- |
-===============|===============|===============|===============|===============
- | |
- 3.3V proto- | w/o level | no such -- only 5V
- type adapter | shift buffer |
- | |
- | 40 I/O pins |
- | 1 card sel. |
- | 1 reset out. |
- | 1 OSC clock |
- | 1 CPU clock |
- | 1 clock out. |
- | |
----------------|---------------|---------------|---------------|---------------
- | |
- 5V prototype | with level | 2 ports -- both card ports supplied with its
- adapter | shift buffer | own level shift buffer
- | |
- | 40 I/O pins | port 1 & 2:
- | 1 card sel. | 41 I/O pins
- | 1 Vee ? ? ? | 1 card select
- | 1 reset out. | 1 reset output (from dev/board)
- | 1 OSC clock | 1 OSC clock (from dev/board)
- | 1 CPU clock | 1 CPU clock (from dev/board)
- | 1 clock inp. | 1 clock input (to dev/board)
- | |
- | | (special) port 1:
- | | 1 CF select
- | | 1 CF present
- | | 1 CF ATA select
- | | 1 CF power
- | |
- | | NOTE: Both card ports are prepared for raw
- | | IDE working. You can connect such
- | | devices directly to the 40 pin header.
- | | The signal PDIAG (passed diagnostic)
- | | is not connected to any I/O signal.
- | | Card port 1 is hard wired to the on
- | | board Copact Flash adapter together
- | | with all other signals needed by CF
- | | cards. Hot plug should be working too.
-[15],[16] | |
-===============|===============|===============|===============|===============
- | |
- config. CPLD | EPM7064 | EPM7128
- | |
- (alternative | decition by | decision by
- FPGA conf.) | jumper | push button
- | |
- | FPGA config. | FPGA config. | FPGA config.
- | from Flash | from Flash | from Flash
- | only | and EPCS4 | only
- | | |
-===============|===============|===============|===============|===============
-===============================================================================
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/lit-nio.jsp
-[2] http://www.altera.com/literature/lit-apx.jsp
-[3] http://www.altera.com/literature/lit-cyc.jsp
-[4] http://www.altera.com/literature/lit-stx.jsp
-[5] http://www.pericom.com/pdf/datasheets/PI49FCT3805.pdf
- http://www.pericom.com/products/clock/psempart.php?productID=PI49FCT3805
-[6] http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1532,00.html
- http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/21490.pdf
-[7] http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1596,00.html
- http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/23544b.pdf
-[8] http://www.altera.com/literature/lit-config.html
- http://preview.altera.com/literature/ds/micron.pdf
-[9] http://www.idt.com/products/pages/Asynchronous_SRAMs-71V016SA.html
-[10] http://www.idt.com/products/pages/Asynchronous_SRAMs-71V416SL.html
-[11] http://www.micron.com/products/dram/sdram/part.aspx?part=MT48LC4M32B2TG-7
-[12] http://www.linear.com/prod/datasheet.html?datasheet=33
- http://www.linear.com/pdf/1386fa.pdf
-[13] http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1068/ln/en
- http://pdfserv.maxim-ic.com/en/ds/MAX3222-MAX3241.pdf
-[14] http://www.smsc.com/main/catalog/lan91c111.html
-[15] http://www.t13.org/index.html
-[16] http://www.compactflash.org/faqs/faq.htm
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt
index 157936e..6d20707 100644
--- a/doc/uImage.FIT/source_file_format.txt
+++ b/doc/uImage.FIT/source_file_format.txt
@@ -173,8 +173,7 @@ the '/images' node should have the following layout:
- arch : Architecture name, mandatory for types: "standalone", "kernel",
"firmware", "ramdisk" and "fdt". Valid architecture names are: "alpha",
"arm", "i386", "ia64", "mips", "mips64", "ppc", "s390", "sh", "sparc",
- "sparc64", "m68k", "nios", "microblaze", "nios2", "blackfin", "avr32",
- "st200".
+ "sparc64", "m68k", "microblaze", "nios2", "blackfin", "avr32", "st200".
- entry : entry point address, address size is determined by
'#address-cells' property of the root node. Mandatory for for types:
"standalone" and "kernel".