summaryrefslogtreecommitdiff
path: root/drivers/block/ahci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block/ahci.c')
-rw-r--r--drivers/block/ahci.c52
1 files changed, 51 insertions, 1 deletions
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 19c5f13..963efec 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -37,6 +37,8 @@
#include <linux/ctype.h>
#include <ahci.h>
+static int ata_io_flush(u8 port);
+
struct ahci_probe_ent *probe_ent = NULL;
hd_driveid_t *ataid[AHCI_MAX_PORTS];
@@ -55,6 +57,7 @@ hd_driveid_t *ataid[AHCI_MAX_PORTS];
/* Maximum timeouts for each event */
#define WAIT_MS_SPINUP 10000
#define WAIT_MS_DATAIO 5000
+#define WAIT_MS_FLUSH 5000
#define WAIT_MS_LINKUP 4
static inline u32 ahci_port_base(u32 base, u32 port)
@@ -267,7 +270,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
/* register linkup ports */
tmp = readl(port_mmio + PORT_SCR_STAT);
- debug("Port %d status: 0x%x\n", i, tmp);
+ debug("SATA port %d status: 0x%x\n", i, tmp);
if ((tmp & 0xf) == 0x03)
probe_ent->link_port_map |= (0x01 << i);
}
@@ -736,6 +739,17 @@ static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
is_write ? "WRITE" : "READ");
return -EIO;
}
+
+ /* If this transaction is a write, do a following flush.
+ * Writes in u-boot are so rare, and the logic to know when is
+ * the last write and do a flush only there is sufficiently
+ * difficult. Just do a flush after every write. This incurs,
+ * usually, one extra flush when the rare writes do happen.
+ */
+ if (is_write) {
+ if (-EIO == ata_io_flush(pccb->target))
+ return -EIO;
+ }
user_buffer += transfer_size;
user_buffer_size -= transfer_size;
blocks -= now_blocks;
@@ -929,6 +943,42 @@ err_out:
}
#endif
+/*
+ * In the general case of generic rotating media it makes sense to have a
+ * flush capability. It probably even makes sense in the case of SSDs because
+ * one cannot always know for sure what kind of internal cache/flush mechanism
+ * is embodied therein. At first it was planned to invoke this after the last
+ * write to disk and before rebooting. In practice, knowing, a priori, which
+ * is the last write is difficult. Because writing to the disk in u-boot is
+ * very rare, this flush command will be invoked after every block write.
+ */
+static int ata_io_flush(u8 port)
+{
+ u8 fis[20];
+ struct ahci_ioports *pp = &(probe_ent->port[port]);
+ volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
+ u32 cmd_fis_len = 5; /* five dwords */
+
+ /* Preset the FIS */
+ memset(fis, 0, 20);
+ fis[0] = 0x27; /* Host to device FIS. */
+ fis[1] = 1 << 7; /* Command FIS. */
+ fis[2] = ATA_CMD_FLUSH;
+
+ memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
+ ahci_fill_cmd_slot(pp, cmd_fis_len);
+ writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
+
+ if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
+ WAIT_MS_FLUSH, 0x1)) {
+ debug("scsi_ahci: flush command timeout on port %d.\n", port);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+
void scsi_bus_reset(void)
{
/*Not implement*/