diff options
Diffstat (limited to 'drivers/ddr/fsl/ctrl_regs.c')
| -rw-r--r-- | drivers/ddr/fsl/ctrl_regs.c | 28 |
1 files changed, 22 insertions, 6 deletions
diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index d9cac22..a5ef40f 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -297,10 +297,13 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, unsigned char taxpd_mclk = 0; /* Mode register set cycle time (tMRD). */ unsigned char tmrd_mclk; +#if defined(CONFIG_SYS_FSL_DDR4) || defined(CONFIG_SYS_FSL_DDR3) + const unsigned int mclk_ps = get_memory_clk_period_ps(); +#endif #ifdef CONFIG_SYS_FSL_DDR4 /* tXP=max(4nCK, 6ns) */ - int txp = max((get_memory_clk_period_ps() * 4), 6000); /* unit=ps */ + int txp = max(mclk_ps * 4, 6000); /* unit=ps */ trwt_mclk = 2; twrt_mclk = 1; act_pd_exit_mclk = picos_to_mclk(txp); @@ -311,16 +314,19 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, */ tmrd_mclk = max(24, picos_to_mclk(15000)); #elif defined(CONFIG_SYS_FSL_DDR3) + unsigned int data_rate = get_ddr_freq(0); + int txp; /* * (tXARD and tXARDS). Empirical? * The DDR3 spec has not tXARD, * we use the tXP instead of it. - * tXP=max(3nCK, 7.5ns) for DDR3. + * tXP=max(3nCK, 7.5ns) for DDR3-800, 1066 + * max(3nCK, 6ns) for DDR3-1333, 1600, 1866, 2133 * spec has not the tAXPD, we use * tAXPD=1, need design to confirm. */ - int txp = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */ - unsigned int data_rate = get_ddr_freq(0); + txp = max(mclk_ps * 3, (mclk_ps > 1540 ? 7500 : 6000)); + tmrd_mclk = 4; /* set the turnaround time */ @@ -578,6 +584,9 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned char cke_pls; /* Window for four activates (tFAW) */ unsigned short four_act; +#ifdef CONFIG_SYS_FSL_DDR3 + const unsigned int mclk_ps = get_memory_clk_period_ps(); +#endif /* FIXME add check that this must be less than acttorw_mclk */ add_lat_mclk = additive_latency; @@ -619,10 +628,17 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, #ifdef CONFIG_SYS_FSL_DDR4 cpo = 0; cke_pls = max(3, picos_to_mclk(5000)); +#elif defined(CONFIG_SYS_FSL_DDR3) + /* + * cke pulse = max(3nCK, 7.5ns) for DDR3-800 + * max(3nCK, 5.625ns) for DDR3-1066, 1333 + * max(3nCK, 5ns) for DDR3-1600, 1866, 2133 + */ + cke_pls = max(3, picos_to_mclk(mclk_ps > 1870 ? 7500 : + (mclk_ps > 1245 ? 5625 : 5000))); #else - cke_pls = picos_to_mclk(popts->tcke_clock_pulse_width_ps); + cke_pls = FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR; #endif - four_act = picos_to_mclk(popts->tfaw_window_four_activates_ps); ddr->timing_cfg_2 = (0 |