summaryrefslogtreecommitdiff
path: root/drivers/ddr/fsl/options.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ddr/fsl/options.c')
-rw-r--r--drivers/ddr/fsl/options.c1147
1 files changed, 1147 insertions, 0 deletions
diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c
new file mode 100644
index 0000000..4aafcce
--- /dev/null
+++ b/drivers/ddr/fsl/options.c
@@ -0,0 +1,1147 @@
+/*
+ * Copyright 2008, 2010-2012 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <hwconfig.h>
+#include <fsl_ddr_sdram.h>
+
+#include <fsl_ddr.h>
+
+/*
+ * Use our own stack based buffer before relocation to allow accessing longer
+ * hwconfig strings that might be in the environment before we've relocated.
+ * This is pretty fragile on both the use of stack and if the buffer is big
+ * enough. However we will get a warning from getenv_f for the later.
+ */
+
+/* Board-specific functions defined in each board's ddr.c */
+extern void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num);
+
+struct dynamic_odt {
+ unsigned int odt_rd_cfg;
+ unsigned int odt_wr_cfg;
+ unsigned int odt_rtt_norm;
+ unsigned int odt_rtt_wr;
+};
+
+#ifdef CONFIG_SYS_FSL_DDR3
+static const struct dynamic_odt single_Q[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS_AND_OTHER_DIMM,
+ DDR3_RTT_20_OHM,
+ DDR3_RTT_120_OHM
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER, /* tied high */
+ DDR3_RTT_OFF,
+ DDR3_RTT_120_OHM
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS_AND_OTHER_DIMM,
+ DDR3_RTT_20_OHM,
+ DDR3_RTT_120_OHM
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER, /* tied high */
+ DDR3_RTT_OFF,
+ DDR3_RTT_120_OHM
+ }
+};
+
+static const struct dynamic_odt single_D[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_ALL,
+ DDR3_RTT_40_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR3_RTT_OFF,
+ DDR3_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+};
+
+static const struct dynamic_odt single_S[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_ALL,
+ DDR3_RTT_40_OHM,
+ DDR3_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+};
+
+static const struct dynamic_odt dual_DD[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_SAME_DIMM,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR3_RTT_30_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_SAME_DIMM,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR3_RTT_30_OHM,
+ DDR3_RTT_OFF
+ }
+};
+
+static const struct dynamic_odt dual_DS[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_SAME_DIMM,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR3_RTT_30_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_ALL,
+ DDR3_RTT_20_OHM,
+ DDR3_RTT_120_OHM
+ },
+ {0, 0, 0, 0}
+};
+static const struct dynamic_odt dual_SD[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_ALL,
+ DDR3_RTT_20_OHM,
+ DDR3_RTT_120_OHM
+ },
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_SAME_DIMM,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR3_RTT_20_OHM,
+ DDR3_RTT_OFF
+ }
+};
+
+static const struct dynamic_odt dual_SS[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_ALL,
+ DDR3_RTT_30_OHM,
+ DDR3_RTT_120_OHM
+ },
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_ALL,
+ DDR3_RTT_30_OHM,
+ DDR3_RTT_120_OHM
+ },
+ {0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_D0[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_SAME_DIMM,
+ DDR3_RTT_40_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR3_RTT_OFF,
+ DDR3_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_0D[4] = {
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_SAME_DIMM,
+ DDR3_RTT_40_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR3_RTT_OFF,
+ DDR3_RTT_OFF
+ }
+};
+
+static const struct dynamic_odt dual_S0[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR3_RTT_40_OHM,
+ DDR3_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+
+};
+
+static const struct dynamic_odt dual_0S[4] = {
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR3_RTT_40_OHM,
+ DDR3_RTT_OFF
+ },
+ {0, 0, 0, 0}
+
+};
+
+static const struct dynamic_odt odt_unknown[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR3_RTT_120_OHM,
+ DDR3_RTT_OFF
+ }
+};
+#else /* CONFIG_SYS_FSL_DDR3 */
+static const struct dynamic_odt single_Q[4] = {
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+};
+
+static const struct dynamic_odt single_D[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_ALL,
+ DDR2_RTT_150_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+};
+
+static const struct dynamic_odt single_S[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_ALL,
+ DDR2_RTT_150_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+};
+
+static const struct dynamic_odt dual_DD[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ }
+};
+
+static const struct dynamic_odt dual_DS[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_SD[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ }
+};
+
+static const struct dynamic_odt dual_SS[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_OTHER_DIMM,
+ FSL_DDR_ODT_OTHER_DIMM,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_D0[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_ALL,
+ DDR2_RTT_150_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_0D[4] = {
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_ALL,
+ DDR2_RTT_150_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ }
+};
+
+static const struct dynamic_odt dual_S0[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR2_RTT_150_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ {0, 0, 0, 0}
+
+};
+
+static const struct dynamic_odt dual_0S[4] = {
+ {0, 0, 0, 0},
+ {0, 0, 0, 0},
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR2_RTT_150_OHM,
+ DDR2_RTT_OFF
+ },
+ {0, 0, 0, 0}
+
+};
+
+static const struct dynamic_odt odt_unknown[4] = {
+ { /* cs0 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs1 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ },
+ { /* cs2 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_CS,
+ DDR2_RTT_75_OHM,
+ DDR2_RTT_OFF
+ },
+ { /* cs3 */
+ FSL_DDR_ODT_NEVER,
+ FSL_DDR_ODT_NEVER,
+ DDR2_RTT_OFF,
+ DDR2_RTT_OFF
+ }
+};
+#endif
+
+/*
+ * Automatically seleect bank interleaving mode based on DIMMs
+ * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null.
+ * This function only deal with one or two slots per controller.
+ */
+static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm)
+{
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+ if (pdimm[0].n_ranks == 4)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+ else if (pdimm[0].n_ranks == 2)
+ return FSL_DDR_CS0_CS1;
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (pdimm[0].n_ranks == 4)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+#endif
+ if (pdimm[0].n_ranks == 2) {
+ if (pdimm[1].n_ranks == 2)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+ else
+ return FSL_DDR_CS0_CS1;
+ }
+#endif
+ return 0;
+}
+
+unsigned int populate_memctl_options(int all_dimms_registered,
+ memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ unsigned int i;
+ char buffer[HWCONFIG_BUFFER_SIZE];
+ char *buf = NULL;
+#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2)
+ const struct dynamic_odt *pdodt = odt_unknown;
+#endif
+ ulong ddr_freq;
+
+ /*
+ * Extract hwconfig from environment since we have not properly setup
+ * the environment but need it for ddr config params
+ */
+ if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
+ buf = buffer;
+
+#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2)
+ /* Chip select options. */
+ if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
+ switch (pdimm[0].n_ranks) {
+ case 1:
+ pdodt = single_S;
+ break;
+ case 2:
+ pdodt = single_D;
+ break;
+ case 4:
+ pdodt = single_Q;
+ break;
+ }
+ } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
+ switch (pdimm[0].n_ranks) {
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ case 4:
+ pdodt = single_Q;
+ if (pdimm[1].n_ranks)
+ printf("Error: Quad- and Dual-rank DIMMs "
+ "cannot be used together\n");
+ break;
+#endif
+ case 2:
+ switch (pdimm[1].n_ranks) {
+ case 2:
+ pdodt = dual_DD;
+ break;
+ case 1:
+ pdodt = dual_DS;
+ break;
+ case 0:
+ pdodt = dual_D0;
+ break;
+ }
+ break;
+ case 1:
+ switch (pdimm[1].n_ranks) {
+ case 2:
+ pdodt = dual_SD;
+ break;
+ case 1:
+ pdodt = dual_SS;
+ break;
+ case 0:
+ pdodt = dual_S0;
+ break;
+ }
+ break;
+ case 0:
+ switch (pdimm[1].n_ranks) {
+ case 2:
+ pdodt = dual_0D;
+ break;
+ case 1:
+ pdodt = dual_0S;
+ break;
+ }
+ break;
+ }
+ }
+#endif
+
+ /* Pick chip-select local options. */
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2)
+ popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg;
+ popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg;
+ popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm;
+ popts->cs_local_opts[i].odt_rtt_wr = pdodt[i].odt_rtt_wr;
+#else
+ popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
+ popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
+#endif
+ popts->cs_local_opts[i].auto_precharge = 0;
+ }
+
+ /* Pick interleaving mode. */
+
+ /*
+ * 0 = no interleaving
+ * 1 = interleaving between 2 controllers
+ */
+ popts->memctl_interleaving = 0;
+
+ /*
+ * 0 = cacheline
+ * 1 = page
+ * 2 = (logical) bank
+ * 3 = superbank (only if CS interleaving is enabled)
+ */
+ popts->memctl_interleaving_mode = 0;
+
+ /*
+ * 0: cacheline: bit 30 of the 36-bit physical addr selects the memctl
+ * 1: page: bit to the left of the column bits selects the memctl
+ * 2: bank: bit to the left of the bank bits selects the memctl
+ * 3: superbank: bit to the left of the chip select selects the memctl
+ *
+ * NOTE: ba_intlv (rank interleaving) is independent of memory
+ * controller interleaving; it is only within a memory controller.
+ * Must use superbank interleaving if rank interleaving is used and
+ * memory controller interleaving is enabled.
+ */
+
+ /*
+ * 0 = no
+ * 0x40 = CS0,CS1
+ * 0x20 = CS2,CS3
+ * 0x60 = CS0,CS1 + CS2,CS3
+ * 0x04 = CS0,CS1,CS2,CS3
+ */
+ popts->ba_intlv_ctl = 0;
+
+ /* Memory Organization Parameters */
+ popts->registered_dimm_en = all_dimms_registered;
+
+ /* Operational Mode Paramters */
+
+ /* Pick ECC modes */
+ popts->ecc_mode = 0; /* 0 = disabled, 1 = enabled */
+#ifdef CONFIG_DDR_ECC
+ if (hwconfig_sub_f("fsl_ddr", "ecc", buf)) {
+ if (hwconfig_subarg_cmp_f("fsl_ddr", "ecc", "on", buf))
+ popts->ecc_mode = 1;
+ } else
+ popts->ecc_mode = 1;
+#endif
+ popts->ecc_init_using_memctl = 1; /* 0 = use DMA, 1 = use memctl */
+
+ /*
+ * Choose DQS config
+ * 0 for DDR1
+ * 1 for DDR2
+ */
+#if defined(CONFIG_SYS_FSL_DDR1)
+ popts->dqs_config = 0;
+#elif defined(CONFIG_SYS_FSL_DDR2) || defined(CONFIG_SYS_FSL_DDR3)
+ popts->dqs_config = 1;
+#endif
+
+ /* Choose self-refresh during sleep. */
+ popts->self_refresh_in_sleep = 1;
+
+ /* Choose dynamic power management mode. */
+ popts->dynamic_power = 0;
+
+ /*
+ * check first dimm for primary sdram width
+ * presuming all dimms are similar
+ * 0 = 64-bit, 1 = 32-bit, 2 = 16-bit
+ */
+#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2)
+ if (pdimm[0].n_ranks != 0) {
+ if ((pdimm[0].data_width >= 64) && \
+ (pdimm[0].data_width <= 72))
+ popts->data_bus_width = 0;
+ else if ((pdimm[0].data_width >= 32) || \
+ (pdimm[0].data_width <= 40))
+ popts->data_bus_width = 1;
+ else {
+ panic("Error: data width %u is invalid!\n",
+ pdimm[0].data_width);
+ }
+ }
+#else
+ if (pdimm[0].n_ranks != 0) {
+ if (pdimm[0].primary_sdram_width == 64)
+ popts->data_bus_width = 0;
+ else if (pdimm[0].primary_sdram_width == 32)
+ popts->data_bus_width = 1;
+ else if (pdimm[0].primary_sdram_width == 16)
+ popts->data_bus_width = 2;
+ else {
+ panic("Error: primary sdram width %u is invalid!\n",
+ pdimm[0].primary_sdram_width);
+ }
+ }
+#endif
+
+ popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0;
+
+ /* Choose burst length. */
+#if defined(CONFIG_SYS_FSL_DDR3)
+#if defined(CONFIG_E500MC)
+ popts->otf_burst_chop_en = 0; /* on-the-fly burst chop disable */
+ popts->burst_length = DDR_BL8; /* Fixed 8-beat burst len */
+#else
+ if ((popts->data_bus_width == 1) || (popts->data_bus_width == 2)) {
+ /* 32-bit or 16-bit bus */
+ popts->otf_burst_chop_en = 0;
+ popts->burst_length = DDR_BL8;
+ } else {
+ popts->otf_burst_chop_en = 1; /* on-the-fly burst chop */
+ popts->burst_length = DDR_OTF; /* on-the-fly BC4 and BL8 */
+ }
+#endif
+#else
+ popts->burst_length = DDR_BL4; /* has to be 4 for DDR2 */
+#endif
+
+ /* Choose ddr controller address mirror mode */
+#if defined(CONFIG_SYS_FSL_DDR3)
+ popts->mirrored_dimm = pdimm[0].mirrored_dimm;
+#endif
+
+ /* Global Timing Parameters. */
+ debug("mclk_ps = %u ps\n", get_memory_clk_period_ps());
+
+ /* Pick a caslat override. */
+ popts->cas_latency_override = 0;
+ popts->cas_latency_override_value = 3;
+ if (popts->cas_latency_override) {
+ debug("using caslat override value = %u\n",
+ popts->cas_latency_override_value);
+ }
+
+ /* Decide whether to use the computed derated latency */
+ popts->use_derated_caslat = 0;
+
+ /* Choose an additive latency. */
+ popts->additive_latency_override = 0;
+ popts->additive_latency_override_value = 3;
+ if (popts->additive_latency_override) {
+ debug("using additive latency override value = %u\n",
+ popts->additive_latency_override_value);
+ }
+
+ /*
+ * 2T_EN setting
+ *
+ * Factors to consider for 2T_EN:
+ * - number of DIMMs installed
+ * - number of components, number of active ranks
+ * - how much time you want to spend playing around
+ */
+ popts->twot_en = 0;
+ popts->threet_en = 0;
+
+ /* for RDIMM, address parity enable */
+ popts->ap_en = 1;
+
+ /*
+ * BSTTOPRE precharge interval
+ *
+ * Set this to 0 for global auto precharge
+ *
+ * FIXME: Should this be configured in picoseconds?
+ * Why it should be in ps: better understanding of this
+ * relative to actual DRAM timing parameters such as tRAS.
+ * e.g. tRAS(min) = 40 ns
+ */
+ popts->bstopre = 0x100;
+
+ /* Minimum CKE pulse width -- tCKE(MIN) */
+ popts->tcke_clock_pulse_width_ps
+ = mclk_to_picos(FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR);
+
+ /*
+ * Window for four activates -- tFAW
+ *
+ * FIXME: UM: applies only to DDR2/DDR3 with eight logical banks only
+ * FIXME: varies depending upon number of column addresses or data
+ * FIXME: width, was considering looking at pdimm->primary_sdram_width
+ */
+#if defined(CONFIG_SYS_FSL_DDR1)
+ popts->tfaw_window_four_activates_ps = mclk_to_picos(1);
+
+#elif defined(CONFIG_SYS_FSL_DDR2)
+ /*
+ * x4/x8; some datasheets have 35000
+ * x16 wide columns only? Use 50000?
+ */
+ popts->tfaw_window_four_activates_ps = 37500;
+
+#elif defined(CONFIG_SYS_FSL_DDR3)
+ popts->tfaw_window_four_activates_ps = pdimm[0].tfaw_ps;
+#endif
+ popts->zq_en = 0;
+ popts->wrlvl_en = 0;
+#if defined(CONFIG_SYS_FSL_DDR3)
+ /*
+ * due to ddr3 dimm is fly-by topology
+ * we suggest to enable write leveling to
+ * meet the tQDSS under different loading.
+ */
+ popts->wrlvl_en = 1;
+ popts->zq_en = 1;
+ popts->wrlvl_override = 0;
+#endif
+
+ /*
+ * Check interleaving configuration from environment.
+ * Please refer to doc/README.fsl-ddr for the detail.
+ *
+ * If memory controller interleaving is enabled, then the data
+ * bus widths must be programmed identically for all memory controllers.
+ *
+ * XXX: Attempt to set all controllers to the same chip select
+ * interleaving mode. It will do a best effort to get the
+ * requested ranks interleaved together such that the result
+ * should be a subset of the requested configuration.
+ */
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
+ if (!hwconfig_sub_f("fsl_ddr", "ctlr_intlv", buf))
+ goto done;
+
+ if (pdimm[0].n_ranks == 0) {
+ printf("There is no rank on CS0 for controller %d.\n", ctrl_num);
+ popts->memctl_interleaving = 0;
+ goto done;
+ }
+ popts->memctl_interleaving = 1;
+ /*
+ * test null first. if CONFIG_HWCONFIG is not defined
+ * hwconfig_arg_cmp returns non-zero
+ */
+ if (hwconfig_subarg_cmp_f("fsl_ddr", "ctlr_intlv",
+ "null", buf)) {
+ popts->memctl_interleaving = 0;
+ debug("memory controller interleaving disabled.\n");
+ } else if (hwconfig_subarg_cmp_f("fsl_ddr",
+ "ctlr_intlv",
+ "cacheline", buf)) {
+ popts->memctl_interleaving_mode =
+ ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+ 0 : FSL_DDR_CACHE_LINE_INTERLEAVING;
+ popts->memctl_interleaving =
+ ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+ 0 : 1;
+ } else if (hwconfig_subarg_cmp_f("fsl_ddr",
+ "ctlr_intlv",
+ "page", buf)) {
+ popts->memctl_interleaving_mode =
+ ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+ 0 : FSL_DDR_PAGE_INTERLEAVING;
+ popts->memctl_interleaving =
+ ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+ 0 : 1;
+ } else if (hwconfig_subarg_cmp_f("fsl_ddr",
+ "ctlr_intlv",
+ "bank", buf)) {
+ popts->memctl_interleaving_mode =
+ ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+ 0 : FSL_DDR_BANK_INTERLEAVING;
+ popts->memctl_interleaving =
+ ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+ 0 : 1;
+ } else if (hwconfig_subarg_cmp_f("fsl_ddr",
+ "ctlr_intlv",
+ "superbank", buf)) {
+ popts->memctl_interleaving_mode =
+ ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+ 0 : FSL_DDR_SUPERBANK_INTERLEAVING;
+ popts->memctl_interleaving =
+ ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+ 0 : 1;
+#if (CONFIG_NUM_DDR_CONTROLLERS == 3)
+ } else if (hwconfig_subarg_cmp_f("fsl_ddr",
+ "ctlr_intlv",
+ "3way_1KB", buf)) {
+ popts->memctl_interleaving_mode =
+ FSL_DDR_3WAY_1KB_INTERLEAVING;
+ } else if (hwconfig_subarg_cmp_f("fsl_ddr",
+ "ctlr_intlv",
+ "3way_4KB", buf)) {
+ popts->memctl_interleaving_mode =
+ FSL_DDR_3WAY_4KB_INTERLEAVING;
+ } else if (hwconfig_subarg_cmp_f("fsl_ddr",
+ "ctlr_intlv",
+ "3way_8KB", buf)) {
+ popts->memctl_interleaving_mode =
+ FSL_DDR_3WAY_8KB_INTERLEAVING;
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 4)
+ } else if (hwconfig_subarg_cmp_f("fsl_ddr",
+ "ctlr_intlv",
+ "4way_1KB", buf)) {
+ popts->memctl_interleaving_mode =
+ FSL_DDR_4WAY_1KB_INTERLEAVING;
+ } else if (hwconfig_subarg_cmp_f("fsl_ddr",
+ "ctlr_intlv",
+ "4way_4KB", buf)) {
+ popts->memctl_interleaving_mode =
+ FSL_DDR_4WAY_4KB_INTERLEAVING;
+ } else if (hwconfig_subarg_cmp_f("fsl_ddr",
+ "ctlr_intlv",
+ "4way_8KB", buf)) {
+ popts->memctl_interleaving_mode =
+ FSL_DDR_4WAY_8KB_INTERLEAVING;
+#endif
+ } else {
+ popts->memctl_interleaving = 0;
+ printf("hwconfig has unrecognized parameter for ctlr_intlv.\n");
+ }
+done:
+#endif
+ if ((hwconfig_sub_f("fsl_ddr", "bank_intlv", buf)) &&
+ (CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
+ /* test null first. if CONFIG_HWCONFIG is not defined,
+ * hwconfig_subarg_cmp_f returns non-zero */
+ if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+ "null", buf))
+ debug("bank interleaving disabled.\n");
+ else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+ "cs0_cs1", buf))
+ popts->ba_intlv_ctl = FSL_DDR_CS0_CS1;
+ else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+ "cs2_cs3", buf))
+ popts->ba_intlv_ctl = FSL_DDR_CS2_CS3;
+ else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+ "cs0_cs1_and_cs2_cs3", buf))
+ popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3;
+ else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+ "cs0_cs1_cs2_cs3", buf))
+ popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
+ else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+ "auto", buf))
+ popts->ba_intlv_ctl = auto_bank_intlv(pdimm);
+ else
+ printf("hwconfig has unrecognized parameter for bank_intlv.\n");
+ switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
+ case FSL_DDR_CS0_CS1_CS2_CS3:
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+ if (pdimm[0].n_ranks < 4) {
+ popts->ba_intlv_ctl = 0;
+ printf("Not enough bank(chip-select) for "
+ "CS0+CS1+CS2+CS3 on controller %d, "
+ "interleaving disabled!\n", ctrl_num);
+ }
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (pdimm[0].n_ranks == 4)
+ break;
+#endif
+ if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
+ popts->ba_intlv_ctl = 0;
+ printf("Not enough bank(chip-select) for "
+ "CS0+CS1+CS2+CS3 on controller %d, "
+ "interleaving disabled!\n", ctrl_num);
+ }
+ if (pdimm[0].capacity != pdimm[1].capacity) {
+ popts->ba_intlv_ctl = 0;
+ printf("Not identical DIMM size for "
+ "CS0+CS1+CS2+CS3 on controller %d, "
+ "interleaving disabled!\n", ctrl_num);
+ }
+#endif
+ break;
+ case FSL_DDR_CS0_CS1:
+ if (pdimm[0].n_ranks < 2) {
+ popts->ba_intlv_ctl = 0;
+ printf("Not enough bank(chip-select) for "
+ "CS0+CS1 on controller %d, "
+ "interleaving disabled!\n", ctrl_num);
+ }
+ break;
+ case FSL_DDR_CS2_CS3:
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+ if (pdimm[0].n_ranks < 4) {
+ popts->ba_intlv_ctl = 0;
+ printf("Not enough bank(chip-select) for CS2+CS3 "
+ "on controller %d, interleaving disabled!\n", ctrl_num);
+ }
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+ if (pdimm[1].n_ranks < 2) {
+ popts->ba_intlv_ctl = 0;
+ printf("Not enough bank(chip-select) for CS2+CS3 "
+ "on controller %d, interleaving disabled!\n", ctrl_num);
+ }
+#endif
+ break;
+ case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+ if (pdimm[0].n_ranks < 4) {
+ popts->ba_intlv_ctl = 0;
+ printf("Not enough bank(CS) for CS0+CS1 and "
+ "CS2+CS3 on controller %d, "
+ "interleaving disabled!\n", ctrl_num);
+ }
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+ if ((pdimm[0].n_ranks < 2) || (pdimm[1].n_ranks < 2)) {
+ popts->ba_intlv_ctl = 0;
+ printf("Not enough bank(CS) for CS0+CS1 and "
+ "CS2+CS3 on controller %d, "
+ "interleaving disabled!\n", ctrl_num);
+ }
+#endif
+ break;
+ default:
+ popts->ba_intlv_ctl = 0;
+ break;
+ }
+ }
+
+ if (hwconfig_sub_f("fsl_ddr", "addr_hash", buf)) {
+ if (hwconfig_subarg_cmp_f("fsl_ddr", "addr_hash", "null", buf))
+ popts->addr_hash = 0;
+ else if (hwconfig_subarg_cmp_f("fsl_ddr", "addr_hash",
+ "true", buf))
+ popts->addr_hash = 1;
+ }
+
+ if (pdimm[0].n_ranks == 4)
+ popts->quad_rank_present = 1;
+
+ ddr_freq = get_ddr_freq(0) / 1000000;
+ if (popts->registered_dimm_en) {
+ popts->rcw_override = 1;
+ popts->rcw_1 = 0x000a5a00;
+ if (ddr_freq <= 800)
+ popts->rcw_2 = 0x00000000;
+ else if (ddr_freq <= 1066)
+ popts->rcw_2 = 0x00100000;
+ else if (ddr_freq <= 1333)
+ popts->rcw_2 = 0x00200000;
+ else
+ popts->rcw_2 = 0x00300000;
+ }
+
+ fsl_ddr_board_options(popts, pdimm, ctrl_num);
+
+ return 0;
+}
+
+void check_interleaving_options(fsl_ddr_info_t *pinfo)
+{
+ int i, j, k, check_n_ranks, intlv_invalid = 0;
+ unsigned int check_intlv, check_n_row_addr, check_n_col_addr;
+ unsigned long long check_rank_density;
+ struct dimm_params_s *dimm;
+ /*
+ * Check if all controllers are configured for memory
+ * controller interleaving. Identical dimms are recommended. At least
+ * the size, row and col address should be checked.
+ */
+ j = 0;
+ check_n_ranks = pinfo->dimm_params[0][0].n_ranks;
+ check_rank_density = pinfo->dimm_params[0][0].rank_density;
+ check_n_row_addr = pinfo->dimm_params[0][0].n_row_addr;
+ check_n_col_addr = pinfo->dimm_params[0][0].n_col_addr;
+ check_intlv = pinfo->memctl_opts[0].memctl_interleaving_mode;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ dimm = &pinfo->dimm_params[i][0];
+ if (!pinfo->memctl_opts[i].memctl_interleaving) {
+ continue;
+ } else if (((check_rank_density != dimm->rank_density) ||
+ (check_n_ranks != dimm->n_ranks) ||
+ (check_n_row_addr != dimm->n_row_addr) ||
+ (check_n_col_addr != dimm->n_col_addr) ||
+ (check_intlv !=
+ pinfo->memctl_opts[i].memctl_interleaving_mode))){
+ intlv_invalid = 1;
+ break;
+ } else {
+ j++;
+ }
+
+ }
+ if (intlv_invalid) {
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
+ pinfo->memctl_opts[i].memctl_interleaving = 0;
+ printf("Not all DIMMs are identical. "
+ "Memory controller interleaving disabled.\n");
+ } else {
+ switch (check_intlv) {
+ case FSL_DDR_CACHE_LINE_INTERLEAVING:
+ case FSL_DDR_PAGE_INTERLEAVING:
+ case FSL_DDR_BANK_INTERLEAVING:
+ case FSL_DDR_SUPERBANK_INTERLEAVING:
+ if (3 == CONFIG_NUM_DDR_CONTROLLERS)
+ k = 2;
+ else
+ k = CONFIG_NUM_DDR_CONTROLLERS;
+ break;
+ case FSL_DDR_3WAY_1KB_INTERLEAVING:
+ case FSL_DDR_3WAY_4KB_INTERLEAVING:
+ case FSL_DDR_3WAY_8KB_INTERLEAVING:
+ case FSL_DDR_4WAY_1KB_INTERLEAVING:
+ case FSL_DDR_4WAY_4KB_INTERLEAVING:
+ case FSL_DDR_4WAY_8KB_INTERLEAVING:
+ default:
+ k = CONFIG_NUM_DDR_CONTROLLERS;
+ break;
+ }
+ debug("%d of %d controllers are interleaving.\n", j, k);
+ if (j && (j != k)) {
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
+ pinfo->memctl_opts[i].memctl_interleaving = 0;
+ printf("Not all controllers have compatible "
+ "interleaving mode. All disabled.\n");
+ }
+ }
+ debug("Checking interleaving options completed\n");
+}
+
+int fsl_use_spd(void)
+{
+ int use_spd = 0;
+
+#ifdef CONFIG_DDR_SPD
+ char buffer[HWCONFIG_BUFFER_SIZE];
+ char *buf = NULL;
+
+ /*
+ * Extract hwconfig from environment since we have not properly setup
+ * the environment but need it for ddr config params
+ */
+ if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
+ buf = buffer;
+
+ /* if hwconfig is not enabled, or "sdram" is not defined, use spd */
+ if (hwconfig_sub_f("fsl_ddr", "sdram", buf)) {
+ if (hwconfig_subarg_cmp_f("fsl_ddr", "sdram", "spd", buf))
+ use_spd = 1;
+ else if (hwconfig_subarg_cmp_f("fsl_ddr", "sdram",
+ "fixed", buf))
+ use_spd = 0;
+ else
+ use_spd = 1;
+ } else
+ use_spd = 1;
+#endif
+
+ return use_spd;
+}