1 files changed, 0 insertions, 126 deletions
diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c
deleted file mode 100644
index 4c0c0b8..0000000
--- a/drivers/hwmon/ds1775.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Dallas Semiconductor's DS1775 Digital Thermometer and Thermostat
- */
-
-#include <common.h>
-
-#include <i2c.h>
-#include <dtt.h>
-
-#define DTT_I2C_DEV_CODE	0x48 /* Dallas Semi's DS1775 device code */
-#define DTT_READ_TEMP		0x0
-#define DTT_CONFIG		0x1
-#define DTT_TEMP_HYST		0x2
-#define DTT_TEMP_OS		0x3
-
-int dtt_read(int sensor, int reg)
-{
-	int dlen;
-	uchar data[2];
-
-	/*
-	 * Calculate sensor address and command
-	 */
-	sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1775 */
-
-	/*
-	 * Prepare to handle 2 byte result
-	 */
-	if ((reg == DTT_READ_TEMP) ||
-	    (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST))
-		dlen = 2;
-	else
-		dlen = 1;
-
-	/*
-	 * Now try to read the register
-	 */
-	if (i2c_read(sensor, reg, 1, data, dlen) != 0)
-		return 1;
-
-	/*
-	 * Handle 2 byte result
-	 */
-	if (dlen == 2)
-		return ((int)((short)data[1] + (((short)data[0]) << 8)));
-
-	return (int) data[0];
-}
-
-
-int dtt_write(int sensor, int reg, int val)
-{
-	int dlen;
-	uchar data[2];
-
-	/*
-	 * Calculate sensor address and register
-	 */
-	sensor = DTT_I2C_DEV_CODE + (sensor & 0x07);
-
-	/*
-	 * Handle various data sizes
-	 */
-	if ((reg == DTT_READ_TEMP) ||
-	    (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST)) {
-		dlen = 2;
-		data[0] = (char)((val >> 8) & 0xff); /* MSB first */
-		data[1] = (char)(val & 0xff);
-	} else {
-		dlen = 1;
-		data[0] = (char)(val & 0xff);
-	}
-
-	/*
-	 * Write value to device
-	 */
-	if (i2c_write(sensor, reg, 1, data, dlen) != 0)
-		return 1;
-
-	return 0;
-}
-
-
-int dtt_init_one(int sensor)
-{
-	int val;
-
-	/*
-	 * Setup High Temp
-	 */
-	val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80;
-	if (dtt_write(sensor, DTT_TEMP_OS, val) != 0)
-		return 1;
-	udelay(50000);			/* Max 50ms */
-
-	/*
-	 * Setup Low Temp - hysteresis
-	 */
-	val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
-	if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0)
-		return 1;
-	udelay(50000);			/* Max 50ms */
-
-	/*
-	 * Setup configuraton register
-	 *
-	 * Fault Tolerance limits 4, Thermometer resolution bits is 9,
-	 * Polarity = Active Low,continuous conversion mode, Thermostat
-	 * mode is interrupt mode
-	 */
-	val = 0xa;
-	if (dtt_write(sensor, DTT_CONFIG, val) != 0)
-		return 1;
-	udelay(50000);			/* Max 50ms */
-
-	return 0;
-}
-
-int dtt_get_temp(int sensor)
-{
-	return (dtt_read(sensor, DTT_READ_TEMP) / 256);
-}