summaryrefslogtreecommitdiff
path: root/drivers/i2c/kirkwood_i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/kirkwood_i2c.c')
-rw-r--r--drivers/i2c/kirkwood_i2c.c496
1 files changed, 0 insertions, 496 deletions
diff --git a/drivers/i2c/kirkwood_i2c.c b/drivers/i2c/kirkwood_i2c.c
deleted file mode 100644
index a4409be..0000000
--- a/drivers/i2c/kirkwood_i2c.c
+++ /dev/null
@@ -1,496 +0,0 @@
-/*
- * Driver for the i2c controller on the Marvell line of host bridges
- * (e.g, gt642[46]0, mv643[46]0, mv644[46]0, Orion SoC family),
- * and Kirkwood family.
- *
- * Based on:
- * Author: Mark A. Greer <mgreer@mvista.com>
- * 2005 (c) MontaVista, Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * ported from Linux to u-boot
- * (C) Copyright 2009
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- */
-#include <common.h>
-#include <i2c.h>
-#include <asm/arch/kirkwood.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
-#if defined(CONFIG_I2C_MUX)
-static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0;
-#endif
-
-/* Register defines */
-#define KW_I2C_REG_SLAVE_ADDR 0x00
-#define KW_I2C_REG_DATA 0x04
-#define KW_I2C_REG_CONTROL 0x08
-#define KW_I2C_REG_STATUS 0x0c
-#define KW_I2C_REG_BAUD 0x0c
-#define KW_I2C_REG_EXT_SLAVE_ADDR 0x10
-#define KW_I2C_REG_SOFT_RESET 0x1c
-
-#define KW_I2C_REG_CONTROL_ACK 0x00000004
-#define KW_I2C_REG_CONTROL_IFLG 0x00000008
-#define KW_I2C_REG_CONTROL_STOP 0x00000010
-#define KW_I2C_REG_CONTROL_START 0x00000020
-#define KW_I2C_REG_CONTROL_TWSIEN 0x00000040
-#define KW_I2C_REG_CONTROL_INTEN 0x00000080
-
-/* Ctlr status values */
-#define KW_I2C_STATUS_BUS_ERR 0x00
-#define KW_I2C_STATUS_MAST_START 0x08
-#define KW_I2C_STATUS_MAST_REPEAT_START 0x10
-#define KW_I2C_STATUS_MAST_WR_ADDR_ACK 0x18
-#define KW_I2C_STATUS_MAST_WR_ADDR_NO_ACK 0x20
-#define KW_I2C_STATUS_MAST_WR_ACK 0x28
-#define KW_I2C_STATUS_MAST_WR_NO_ACK 0x30
-#define KW_I2C_STATUS_MAST_LOST_ARB 0x38
-#define KW_I2C_STATUS_MAST_RD_ADDR_ACK 0x40
-#define KW_I2C_STATUS_MAST_RD_ADDR_NO_ACK 0x48
-#define KW_I2C_STATUS_MAST_RD_DATA_ACK 0x50
-#define KW_I2C_STATUS_MAST_RD_DATA_NO_ACK 0x58
-#define KW_I2C_STATUS_MAST_WR_ADDR_2_ACK 0xd0
-#define KW_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK 0xd8
-#define KW_I2C_STATUS_MAST_RD_ADDR_2_ACK 0xe0
-#define KW_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK 0xe8
-#define KW_I2C_STATUS_NO_STATUS 0xf8
-
-/* Driver states */
-enum {
- KW_I2C_STATE_INVALID,
- KW_I2C_STATE_IDLE,
- KW_I2C_STATE_WAITING_FOR_START_COND,
- KW_I2C_STATE_WAITING_FOR_ADDR_1_ACK,
- KW_I2C_STATE_WAITING_FOR_ADDR_2_ACK,
- KW_I2C_STATE_WAITING_FOR_SLAVE_ACK,
- KW_I2C_STATE_WAITING_FOR_SLAVE_DATA,
-};
-
-/* Driver actions */
-enum {
- KW_I2C_ACTION_INVALID,
- KW_I2C_ACTION_CONTINUE,
- KW_I2C_ACTION_SEND_START,
- KW_I2C_ACTION_SEND_ADDR_1,
- KW_I2C_ACTION_SEND_ADDR_2,
- KW_I2C_ACTION_SEND_DATA,
- KW_I2C_ACTION_RCV_DATA,
- KW_I2C_ACTION_RCV_DATA_STOP,
- KW_I2C_ACTION_SEND_STOP,
-};
-
-/* defines to get compatible with Linux driver */
-#define IRQ_NONE 0x0
-#define IRQ_HANDLED 0x01
-
-#define I2C_M_TEN 0x01
-#define I2C_M_RD 0x02
-#define I2C_M_REV_DIR_ADDR 0x04;
-
-struct i2c_msg {
- u32 addr;
- u32 flags;
- u8 *buf;
- u32 len;
-};
-
-struct kirkwood_i2c_data {
- int irq;
- u32 state;
- u32 action;
- u32 aborting;
- u32 cntl_bits;
- void *reg_base;
- u32 reg_base_p;
- u32 reg_size;
- u32 addr1;
- u32 addr2;
- u32 bytes_left;
- u32 byte_posn;
- u32 block;
- int rc;
- u32 freq_m;
- u32 freq_n;
- struct i2c_msg *msg;
-};
-
-static struct kirkwood_i2c_data __drv_data __attribute__ ((section (".data")));
-static struct kirkwood_i2c_data *drv_data = &__drv_data;
-static struct i2c_msg __i2c_msg __attribute__ ((section (".data")));
-static struct i2c_msg *kirkwood_i2c_msg = &__i2c_msg;
-
-/*
- *****************************************************************************
- *
- * Finite State Machine & Interrupt Routines
- *
- *****************************************************************************
- */
-
-static inline int abs(int n)
-{
- if(n >= 0)
- return n;
- else
- return n * -1;
-}
-
-static void kirkwood_calculate_speed(int speed)
-{
- int calcspeed;
- int diff;
- int best_diff = CONFIG_SYS_TCLK;
- int best_speed = 0;
- int m, n;
- int tmp[8] = {2, 4, 8, 16, 32, 64, 128, 256};
-
- for (n = 0; n < 8; n++) {
- for (m = 0; m < 16; m++) {
- calcspeed = CONFIG_SYS_TCLK / (10 * (m + 1) * tmp[n]);
- diff = abs((speed - calcspeed));
- if ( diff < best_diff) {
- best_diff = diff;
- best_speed = calcspeed;
- drv_data->freq_m = m;
- drv_data->freq_n = n;
- }
- }
- }
-}
-
-/* Reset hardware and initialize FSM */
-static void
-kirkwood_i2c_hw_init(int speed, int slaveadd)
-{
- drv_data->state = KW_I2C_STATE_IDLE;
-
- kirkwood_calculate_speed(speed);
- writel(0, CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_SOFT_RESET);
- writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)),
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_BAUD);
- writel(slaveadd, CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_SLAVE_ADDR);
- writel(0, CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_EXT_SLAVE_ADDR);
- writel(KW_I2C_REG_CONTROL_TWSIEN | KW_I2C_REG_CONTROL_STOP,
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
-}
-
-static void
-kirkwood_i2c_fsm(u32 status)
-{
- /*
- * If state is idle, then this is likely the remnants of an old
- * operation that driver has given up on or the user has killed.
- * If so, issue the stop condition and go to idle.
- */
- if (drv_data->state == KW_I2C_STATE_IDLE) {
- drv_data->action = KW_I2C_ACTION_SEND_STOP;
- return;
- }
-
- /* The status from the ctlr [mostly] tells us what to do next */
- switch (status) {
- /* Start condition interrupt */
- case KW_I2C_STATUS_MAST_START: /* 0x08 */
- case KW_I2C_STATUS_MAST_REPEAT_START: /* 0x10 */
- drv_data->action = KW_I2C_ACTION_SEND_ADDR_1;
- drv_data->state = KW_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
- break;
-
- /* Performing a write */
- case KW_I2C_STATUS_MAST_WR_ADDR_ACK: /* 0x18 */
- if (drv_data->msg->flags & I2C_M_TEN) {
- drv_data->action = KW_I2C_ACTION_SEND_ADDR_2;
- drv_data->state =
- KW_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
- break;
- }
- /* FALLTHRU */
- case KW_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
- case KW_I2C_STATUS_MAST_WR_ACK: /* 0x28 */
- if ((drv_data->bytes_left == 0)
- || (drv_data->aborting
- && (drv_data->byte_posn != 0))) {
- drv_data->action = KW_I2C_ACTION_SEND_STOP;
- drv_data->state = KW_I2C_STATE_IDLE;
- } else {
- drv_data->action = KW_I2C_ACTION_SEND_DATA;
- drv_data->state =
- KW_I2C_STATE_WAITING_FOR_SLAVE_ACK;
- drv_data->bytes_left--;
- }
- break;
-
- /* Performing a read */
- case KW_I2C_STATUS_MAST_RD_ADDR_ACK: /* 40 */
- if (drv_data->msg->flags & I2C_M_TEN) {
- drv_data->action = KW_I2C_ACTION_SEND_ADDR_2;
- drv_data->state =
- KW_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
- break;
- }
- /* FALLTHRU */
- case KW_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */
- if (drv_data->bytes_left == 0) {
- drv_data->action = KW_I2C_ACTION_SEND_STOP;
- drv_data->state = KW_I2C_STATE_IDLE;
- break;
- }
- /* FALLTHRU */
- case KW_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */
- if (status != KW_I2C_STATUS_MAST_RD_DATA_ACK)
- drv_data->action = KW_I2C_ACTION_CONTINUE;
- else {
- drv_data->action = KW_I2C_ACTION_RCV_DATA;
- drv_data->bytes_left--;
- }
- drv_data->state = KW_I2C_STATE_WAITING_FOR_SLAVE_DATA;
-
- if ((drv_data->bytes_left == 1) || drv_data->aborting)
- drv_data->cntl_bits &= ~KW_I2C_REG_CONTROL_ACK;
- break;
-
- case KW_I2C_STATUS_MAST_RD_DATA_NO_ACK: /* 0x58 */
- drv_data->action = KW_I2C_ACTION_RCV_DATA_STOP;
- drv_data->state = KW_I2C_STATE_IDLE;
- break;
-
- case KW_I2C_STATUS_MAST_WR_ADDR_NO_ACK: /* 0x20 */
- case KW_I2C_STATUS_MAST_WR_NO_ACK: /* 30 */
- case KW_I2C_STATUS_MAST_RD_ADDR_NO_ACK: /* 48 */
- /* Doesn't seem to be a device at other end */
- drv_data->action = KW_I2C_ACTION_SEND_STOP;
- drv_data->state = KW_I2C_STATE_IDLE;
- drv_data->rc = -ENODEV;
- break;
-
- default:
- printf("kirkwood_i2c_fsm: Ctlr Error -- state: 0x%x, "
- "status: 0x%x, addr: 0x%x, flags: 0x%x\n",
- drv_data->state, status, drv_data->msg->addr,
- drv_data->msg->flags);
- drv_data->action = KW_I2C_ACTION_SEND_STOP;
- kirkwood_i2c_hw_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- drv_data->rc = -EIO;
- }
-}
-
-static void
-kirkwood_i2c_do_action(void)
-{
- switch(drv_data->action) {
- case KW_I2C_ACTION_CONTINUE:
- writel(drv_data->cntl_bits,
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
- break;
-
- case KW_I2C_ACTION_SEND_START:
- writel(drv_data->cntl_bits | KW_I2C_REG_CONTROL_START,
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
- break;
-
- case KW_I2C_ACTION_SEND_ADDR_1:
- writel(drv_data->addr1,
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
- writel(drv_data->cntl_bits,
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
- break;
-
- case KW_I2C_ACTION_SEND_ADDR_2:
- writel(drv_data->addr2,
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
- writel(drv_data->cntl_bits,
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
- break;
-
- case KW_I2C_ACTION_SEND_DATA:
- writel(drv_data->msg->buf[drv_data->byte_posn++],
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
- writel(drv_data->cntl_bits,
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
- break;
-
- case KW_I2C_ACTION_RCV_DATA:
- drv_data->msg->buf[drv_data->byte_posn++] =
- readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
- writel(drv_data->cntl_bits,
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
- break;
-
- case KW_I2C_ACTION_RCV_DATA_STOP:
- drv_data->msg->buf[drv_data->byte_posn++] =
- readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
- drv_data->cntl_bits &= ~KW_I2C_REG_CONTROL_INTEN;
- writel(drv_data->cntl_bits | KW_I2C_REG_CONTROL_STOP,
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
- drv_data->block = 0;
- break;
-
- case KW_I2C_ACTION_INVALID:
- default:
- printf("kirkwood_i2c_do_action: Invalid action: %d\n",
- drv_data->action);
- drv_data->rc = -EIO;
- /* FALLTHRU */
- case KW_I2C_ACTION_SEND_STOP:
- drv_data->cntl_bits &= ~KW_I2C_REG_CONTROL_INTEN;
- writel(drv_data->cntl_bits | KW_I2C_REG_CONTROL_STOP,
- CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
- drv_data->block = 0;
- break;
- }
-}
-
-static int
-kirkwood_i2c_intr(void)
-{
- u32 status;
- u32 ctrl;
- int rc = IRQ_NONE;
-
- ctrl = readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
- while ((ctrl & KW_I2C_REG_CONTROL_IFLG) &&
- (drv_data->rc == 0)) {
- status = readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_STATUS);
- kirkwood_i2c_fsm(status);
- kirkwood_i2c_do_action();
- rc = IRQ_HANDLED;
- ctrl = readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
- udelay(1000);
- }
- return rc;
-}
-
-static void
-kirkwood_i2c_doio(struct i2c_msg *msg)
-{
- int ret;
-
- while ((drv_data->rc == 0) && (drv_data->state != KW_I2C_STATE_IDLE)) {
- /* poll Status register */
- ret = kirkwood_i2c_intr();
- if (ret == IRQ_NONE)
- udelay(10);
- }
-}
-
-static void
-kirkwood_i2c_prepare_for_io(struct i2c_msg *msg)
-{
- u32 dir = 0;
-
- drv_data->msg = msg;
- drv_data->byte_posn = 0;
- drv_data->bytes_left = msg->len;
- drv_data->aborting = 0;
- drv_data->rc = 0;
- /* in u-boot we use no IRQs */
- drv_data->cntl_bits = KW_I2C_REG_CONTROL_ACK | KW_I2C_REG_CONTROL_TWSIEN;
-
- if (msg->flags & I2C_M_RD)
- dir = 1;
- if (msg->flags & I2C_M_TEN) {
- drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
- drv_data->addr2 = (u32)msg->addr & 0xff;
- } else {
- drv_data->addr1 = ((u32)msg->addr & 0x7f) << 1 | dir;
- drv_data->addr2 = 0;
- }
- /* OK, no start it (from kirkwood_i2c_execute_msg())*/
- drv_data->action = KW_I2C_ACTION_SEND_START;
- drv_data->state = KW_I2C_STATE_WAITING_FOR_START_COND;
- drv_data->block = 1;
- kirkwood_i2c_do_action();
-}
-
-void
-i2c_init(int speed, int slaveadd)
-{
- kirkwood_i2c_hw_init(speed, slaveadd);
-}
-
-int
-i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
-{
- kirkwood_i2c_msg->buf = data;
- kirkwood_i2c_msg->len = length;
- kirkwood_i2c_msg->addr = dev;
- kirkwood_i2c_msg->flags = I2C_M_RD;
-
- kirkwood_i2c_prepare_for_io(kirkwood_i2c_msg);
- kirkwood_i2c_doio(kirkwood_i2c_msg);
- return drv_data->rc;
-}
-
-int
-i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
-{
- kirkwood_i2c_msg->buf = data;
- kirkwood_i2c_msg->len = length;
- kirkwood_i2c_msg->addr = dev;
- kirkwood_i2c_msg->flags = 0;
-
- kirkwood_i2c_prepare_for_io(kirkwood_i2c_msg);
- kirkwood_i2c_doio(kirkwood_i2c_msg);
- return drv_data->rc;
-}
-
-int
-i2c_probe(uchar chip)
-{
- return i2c_read(chip, 0, 0, NULL, 0);
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
-#if defined(CONFIG_I2C_MUX)
- if (bus < CONFIG_SYS_MAX_I2C_BUS) {
- i2c_bus_num = bus;
- } else {
- int ret;
-
- ret = i2x_mux_select_mux(bus);
- if (ret)
- return ret;
- i2c_bus_num = 0;
- }
- i2c_bus_num_mux = bus;
-#else
- if (bus > 0) {
- return -1;
- }
-
- i2c_bus_num = bus;
-#endif
- return 0;
-}
-
-unsigned int i2c_get_bus_num(void)
-{
-#if defined(CONFIG_I2C_MUX)
- return i2c_bus_num_mux;
-#else
- return i2c_bus_num;
-#endif
-}