summaryrefslogtreecommitdiff
path: root/drivers/i2c/omap24xx_i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/omap24xx_i2c.c')
-rw-r--r--drivers/i2c/omap24xx_i2c.c58
1 files changed, 26 insertions, 32 deletions
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 81193b0..978507b 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -150,16 +150,19 @@ void i2c_init(int speed, int slaveadd)
bus_initialized[current_bus] = 1;
}
-static int i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value)
+static int i2c_read_byte(u8 devaddr, u16 regoffset, u8 alen, u8 *value)
{
int i2c_error = 0;
u16 status;
+ int i = 2 - alen;
+ u8 tmpbuf[2] = {(regoffset) >> 8, regoffset & 0xff};
+ u16 w;
/* wait until bus not busy */
wait_for_bb();
/* one byte only */
- writew(1, &i2c_base->cnt);
+ writew(alen, &i2c_base->cnt);
/* set slave address */
writew(devaddr, &i2c_base->sa);
/* no stop bit needed here */
@@ -174,8 +177,12 @@ static int i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value)
goto read_exit;
}
if (status & I2C_STAT_XRDY) {
- /* Important: have to use byte access */
- writeb(regoffset, &i2c_base->data);
+ w = tmpbuf[i++];
+#if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX))
+ w |= tmpbuf[i++] << 8;
+#endif
+ writew(w, &i2c_base->data);
writew(I2C_STAT_XRDY, &i2c_base->stat);
}
if (status & I2C_STAT_ARDY) {
@@ -303,18 +310,18 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
int i;
- if (alen > 1) {
+ if (alen > 2) {
printf("I2C read: addr len %d not supported\n", alen);
return 1;
}
- if (addr + len > 256) {
+ if (addr + len > (1 << 16)) {
puts("I2C read: address out of range\n");
return 1;
}
for (i = 0; i < len; i++) {
- if (i2c_read_byte(chip, addr + i, &buffer[i])) {
+ if (i2c_read_byte(chip, addr + i, alen, &buffer[i])) {
puts("I2C read: I/O error\n");
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 1;
@@ -329,13 +336,15 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
int i;
u16 status;
int i2c_error = 0;
+ u16 w;
+ u8 tmpbuf[2] = {addr >> 8, addr & 0xff};
- if (alen > 1) {
+ if (alen > 2) {
printf("I2C write: addr len %d not supported\n", alen);
return 1;
}
- if (addr + len > 256) {
+ if (addr + len > (1 << 16)) {
printf("I2C write: address 0x%x + 0x%x out of range\n",
addr, len);
return 1;
@@ -353,28 +362,8 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
I2C_CON_STP, &i2c_base->con);
- /* Send address byte */
- status = wait_for_pin();
-
- if (status == 0 || status & I2C_STAT_NACK) {
- i2c_error = 1;
- printf("error waiting for i2c address ACK (status=0x%x)\n",
- status);
- goto write_exit;
- }
-
- if (status & I2C_STAT_XRDY) {
- writeb(addr & 0xFF, &i2c_base->data);
- writew(I2C_STAT_XRDY, &i2c_base->stat);
- } else {
- i2c_error = 1;
- printf("i2c bus not ready for transmit (status=0x%x)\n",
- status);
- goto write_exit;
- }
-
- /* address phase is over, now write data */
- for (i = 0; i < len; i++) {
+ /* Send address and data */
+ for (i = -alen; i < len; i++) {
status = wait_for_pin();
if (status == 0 || status & I2C_STAT_NACK) {
@@ -385,7 +374,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
if (status & I2C_STAT_XRDY) {
- writeb(buffer[i], &i2c_base->data);
+ w = (i < 0) ? tmpbuf[2+i] : buffer[i];
+#if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX))
+ w |= ((++i < 0) ? tmpbuf[2+i] : buffer[i]) << 8;
+#endif
+ writew(w, &i2c_base->data);
writew(I2C_STAT_XRDY, &i2c_base->stat);
} else {
i2c_error = 1;