summaryrefslogtreecommitdiff
path: root/drivers/i2c/soft_i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/soft_i2c.c')
-rw-r--r--drivers/i2c/soft_i2c.c111
1 files changed, 72 insertions, 39 deletions
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 23db2ee..ebe60e2 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -28,6 +28,7 @@
#include <common.h>
#ifdef CONFIG_MPC8260 /* only valid for MPC8260 */
#include <ioports.h>
+#include <asm/io.h>
#endif
#ifdef CONFIG_AT91RM9200 /* need this for the at91rm9200 */
#include <asm/io.h>
@@ -39,6 +40,9 @@
#ifdef CONFIG_LPC2292
#include <asm/arch/hardware.h>
#endif
+#ifdef CONFIG_MPC866 /* only valid for MPC866 */
+#include <asm/io.h>
+#endif
#include <i2c.h>
/* #define DEBUG_I2C */
@@ -68,17 +72,23 @@ DECLARE_GLOBAL_DATA_PTR;
#define PRINTD(fmt,args...)
#endif
+#if defined(CONFIG_I2C_MULTI_BUS)
+static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
+#endif /* CONFIG_I2C_MULTI_BUS */
+
/*-----------------------------------------------------------------------
* Local functions
*/
+#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
static void send_reset (void);
+#endif
static void send_start (void);
static void send_stop (void);
static void send_ack (int);
static int write_byte (uchar byte);
static uchar read_byte (int);
-
+#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
/*-----------------------------------------------------------------------
* Send a reset sequence consisting of 9 clocks with the data signal high
* to clock any confused device back into an idle state. Also send a
@@ -86,12 +96,7 @@ static uchar read_byte (int);
*/
static void send_reset(void)
{
-#ifdef CONFIG_MPC8260
- volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef CONFIG_8xx
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+ I2C_SOFT_DECLARATIONS /* intentional without ';' */
int j;
I2C_SCL(1);
@@ -111,18 +116,14 @@ static void send_reset(void)
send_stop();
I2C_TRISTATE;
}
+#endif
/*-----------------------------------------------------------------------
* START: High -> Low on SDA while SCL is High
*/
static void send_start(void)
{
-#ifdef CONFIG_MPC8260
- volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef CONFIG_8xx
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+ I2C_SOFT_DECLARATIONS /* intentional without ';' */
I2C_DELAY;
I2C_SDA(1);
@@ -139,12 +140,7 @@ static void send_start(void)
*/
static void send_stop(void)
{
-#ifdef CONFIG_MPC8260
- volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef CONFIG_8xx
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+ I2C_SOFT_DECLARATIONS /* intentional without ';' */
I2C_SCL(0);
I2C_DELAY;
@@ -164,12 +160,7 @@ static void send_stop(void)
*/
static void send_ack(int ack)
{
-#ifdef CONFIG_MPC8260
- volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef CONFIG_8xx
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+ I2C_SOFT_DECLARATIONS /* intentional without ';' */
I2C_SCL(0);
I2C_DELAY;
@@ -189,12 +180,7 @@ static void send_ack(int ack)
*/
static int write_byte(uchar data)
{
-#ifdef CONFIG_MPC8260
- volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef CONFIG_8xx
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+ I2C_SOFT_DECLARATIONS /* intentional without ';' */
int j;
int nack;
@@ -230,6 +216,51 @@ static int write_byte(uchar data)
return(nack); /* not a nack is an ack */
}
+#if defined(CONFIG_I2C_MULTI_BUS)
+/*
+ * Functions for multiple I2C bus handling
+ */
+unsigned int i2c_get_bus_num(void)
+{
+ return i2c_bus_num;
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+#if defined(CONFIG_I2C_MUX)
+ if (bus < CONFIG_SYS_MAX_I2C_BUS) {
+ i2c_bus_num = bus;
+ } else {
+ int ret;
+
+ ret = i2x_mux_select_mux(bus);
+ if (ret == 0)
+ i2c_bus_num = bus;
+ else
+ return ret;
+ }
+#else
+ if (bus >= CONFIG_SYS_MAX_I2C_BUS)
+ return -1;
+ i2c_bus_num = bus;
+#endif
+ return 0;
+}
+
+/* TODO: add 100/400k switching */
+unsigned int i2c_get_bus_speed(void)
+{
+ return CONFIG_SYS_I2C_SPEED;
+}
+
+int i2c_set_bus_speed(unsigned int speed)
+{
+ if (speed != CONFIG_SYS_I2C_SPEED)
+ return -1;
+
+ return 0;
+}
+#endif
/*-----------------------------------------------------------------------
* if ack == I2C_ACK, ACK the byte so can continue reading, else
@@ -237,12 +268,7 @@ static int write_byte(uchar data)
*/
static uchar read_byte(int ack)
{
-#ifdef CONFIG_MPC8260
- volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef CONFIG_8xx
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+ I2C_SOFT_DECLARATIONS /* intentional without ';' */
int data;
int j;
@@ -275,6 +301,12 @@ static uchar read_byte(int ack)
*/
void i2c_init (int speed, int slaveaddr)
{
+#if defined(CONFIG_SYS_I2C_INIT_BOARD)
+ /* call board specific i2c bus reset routine before accessing the */
+ /* environment, which might be in a chip on that bus. For details */
+ /* about this problem see doc/I2C_Edge_Conditions. */
+ i2c_init_board();
+#else
/*
* WARNING: Do NOT save speed in a static variable: if the
* I2C routines are called before RAM is initialized (to read
@@ -282,6 +314,7 @@ void i2c_init (int speed, int slaveaddr)
* system will crash.
*/
send_reset ();
+#endif
}
/*-----------------------------------------------------------------------
@@ -313,7 +346,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
PRINTD("i2c_read: chip %02X addr %02X alen %d buffer %p len %d\n",
chip, addr, alen, buffer, len);
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
/*
* EEPROM chips that implement "address overflow" are ones
* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -325,7 +358,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
* still be one byte because the extra address bits are
* hidden in the chip address.
*/
- chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
PRINTD("i2c_read: fix addr_overflow: chip %02X addr %02X\n",
chip, addr);