summaryrefslogtreecommitdiff
path: root/drivers/net/ns9750_eth.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ns9750_eth.c')
-rw-r--r--drivers/net/ns9750_eth.c797
1 files changed, 797 insertions, 0 deletions
diff --git a/drivers/net/ns9750_eth.c b/drivers/net/ns9750_eth.c
new file mode 100644
index 0000000..067ff8e
--- /dev/null
+++ b/drivers/net/ns9750_eth.c
@@ -0,0 +1,797 @@
+/***********************************************************************
+ *
+ * Copyright (C) 2004 by FS Forth-Systeme GmbH.
+ * All rights reserved.
+ *
+ * $Id: ns9750_eth.c,v 1.2 2004/02/24 14:09:39 mpietrek Exp $
+ * @Author: Markus Pietrek
+ * @Descr: Ethernet driver for the NS9750. Uses DMA Engine with polling
+ * interrupt status. But interrupts are not enabled.
+ * Only one tx buffer descriptor and the RXA buffer descriptor are used
+ * Currently no transmit lockup handling is included. eth_send has a 5s
+ * timeout for sending frames. No retransmits are performed when an
+ * error occurs.
+ * @References: [1] NS9750 Hardware Reference, December 2003
+ * [2] Intel LXT971 Datasheet #249414 Rev. 02
+ * [3] NS7520 Linux Ethernet Driver
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ***********************************************************************/
+
+#include <common.h>
+#include <net.h> /* NetSendPacket */
+
+#include "ns9750_eth.h" /* for Ethernet and PHY */
+
+#ifdef CONFIG_DRIVER_NS9750_ETHERNET
+
+/* some definition to make transistion to linux easier */
+
+#define NS9750_DRIVER_NAME "eth"
+#define KERN_WARNING "Warning:"
+#define KERN_ERR "Error:"
+#define KERN_INFO "Info:"
+
+#if 0
+# define DEBUG
+#endif
+
+#ifdef DEBUG
+# define printk printf
+
+# define DEBUG_INIT 0x0001
+# define DEBUG_MINOR 0x0002
+# define DEBUG_RX 0x0004
+# define DEBUG_TX 0x0008
+# define DEBUG_INT 0x0010
+# define DEBUG_POLL 0x0020
+# define DEBUG_LINK 0x0040
+# define DEBUG_MII 0x0100
+# define DEBUG_MII_LOW 0x0200
+# define DEBUG_MEM 0x0400
+# define DEBUG_ERROR 0x4000
+# define DEBUG_ERROR_CRIT 0x8000
+
+static int nDebugLvl = DEBUG_ERROR_CRIT;
+
+# define DEBUG_ARGS0( FLG, a0 ) if( ( nDebugLvl & (FLG) ) == (FLG) ) \
+ printf("%s: " a0, __FUNCTION__, 0, 0, 0, 0, 0, 0 )
+# define DEBUG_ARGS1( FLG, a0, a1 ) if( ( nDebugLvl & (FLG) ) == (FLG)) \
+ printf("%s: " a0, __FUNCTION__, (int)(a1), 0, 0, 0, 0, 0 )
+# define DEBUG_ARGS2( FLG, a0, a1, a2 ) if( (nDebugLvl & (FLG)) ==(FLG))\
+ printf("%s: " a0, __FUNCTION__, (int)(a1), (int)(a2), 0, 0,0,0 )
+# define DEBUG_ARGS3( FLG, a0, a1, a2, a3 ) if((nDebugLvl &(FLG))==(FLG))\
+ printf("%s: "a0,__FUNCTION__,(int)(a1),(int)(a2),(int)(a3),0,0,0)
+# define DEBUG_FN( FLG ) if( (nDebugLvl & (FLG)) == (FLG) ) \
+ printf("\r%s:line %d\n", (int)__FUNCTION__, __LINE__, 0,0,0,0);
+# define ASSERT( expr, func ) if( !( expr ) ) { \
+ printf( "Assertion failed! %s:line %d %s\n", \
+ (int)__FUNCTION__,__LINE__,(int)(#expr),0,0,0); \
+ func }
+#else /* DEBUG */
+# define printk(...)
+# define DEBUG_ARGS0( FLG, a0 )
+# define DEBUG_ARGS1( FLG, a0, a1 )
+# define DEBUG_ARGS2( FLG, a0, a1, a2 )
+# define DEBUG_ARGS3( FLG, a0, a1, a2, a3 )
+# define DEBUG_FN( n )
+# define ASSERT(expr, func)
+#endif /* DEBUG */
+
+#define NS9750_MII_NEG_DELAY (5*CFG_HZ) /* in s */
+#define TX_TIMEOUT (5*CFG_HZ) /* in s */
+
+/* @TODO move it to eeprom.h */
+#define FS_EEPROM_AUTONEG_MASK 0x7
+#define FS_EEPROM_AUTONEG_SPEED_MASK 0x1
+#define FS_EEPROM_AUTONEG_SPEED_10 0x0
+#define FS_EEPROM_AUTONEG_SPEED_100 0x1
+#define FS_EEPROM_AUTONEG_DUPLEX_MASK 0x2
+#define FS_EEPROM_AUTONEG_DUPLEX_HALF 0x0
+#define FS_EEPROM_AUTONEG_DUPLEX_FULL 0x2
+#define FS_EEPROM_AUTONEG_ENABLE_MASK 0x4
+#define FS_EEPROM_AUTONEG_DISABLE 0x0
+#define FS_EEPROM_AUTONEG_ENABLE 0x4
+
+/* buffer descriptors taken from [1] p.306 */
+typedef struct
+{
+ unsigned int* punSrc;
+ unsigned int unLen; /* 11 bits */
+ unsigned int* punDest; /* unused */
+ union {
+ unsigned int unReg;
+ struct {
+ unsigned uStatus : 16;
+ unsigned uRes : 12;
+ unsigned uFull : 1;
+ unsigned uEnable : 1;
+ unsigned uInt : 1;
+ unsigned uWrap : 1;
+ } bits;
+ } s;
+} rx_buffer_desc_t;
+
+typedef struct
+{
+ unsigned int* punSrc;
+ unsigned int unLen; /* 10 bits */
+ unsigned int* punDest; /* unused */
+ union {
+ unsigned int unReg; /* only 32bit accesses may done to NS9750
+ * eth engine */
+ struct {
+ unsigned uStatus : 16;
+ unsigned uRes : 12;
+ unsigned uFull : 1;
+ unsigned uLast : 1;
+ unsigned uInt : 1;
+ unsigned uWrap : 1;
+ } bits;
+ } s;
+} tx_buffer_desc_t;
+
+static int ns9750_eth_reset( void );
+
+static void ns9750_link_force( void );
+static void ns9750_link_auto_negotiate( void );
+static void ns9750_link_update_egcr( void );
+static void ns9750_link_print_changed( void );
+
+/* the PHY stuff */
+
+static char ns9750_mii_identify_phy( void );
+static unsigned short ns9750_mii_read( unsigned short uiRegister );
+static void ns9750_mii_write( unsigned short uiRegister, unsigned short uiData );
+static unsigned int ns9750_mii_get_clock_divisor( unsigned int unMaxMDIOClk );
+static unsigned int ns9750_mii_poll_busy( void );
+
+static unsigned int nPhyMaxMdioClock = PHY_MDIO_MAX_CLK;
+static unsigned char ucLinkMode = FS_EEPROM_AUTONEG_ENABLE;
+static unsigned int uiLastLinkStatus;
+static PhyType phyDetected = PHY_NONE;
+
+/* we use only one tx buffer descriptor */
+static tx_buffer_desc_t* pTxBufferDesc =
+ (tx_buffer_desc_t*) get_eth_reg_addr( NS9750_ETH_TXBD );
+
+/* we use only one rx buffer descriptor of the 4 */
+static rx_buffer_desc_t aRxBufferDesc[ 4 ];
+
+/***********************************************************************
+ * @Function: eth_init
+ * @Return: -1 on failure otherwise 0
+ * @Descr: Initializes the ethernet engine and uses either FS Forth's default
+ * MAC addr or the one in environment
+ ***********************************************************************/
+
+int eth_init (bd_t * pbis)
+{
+ /* This default MAC Addr is reserved by FS Forth-Systeme for the case of
+ EEPROM failures */
+ unsigned char aucMACAddr[6] = { 0x00, 0x04, 0xf3, 0x00, 0x06, 0x35 };
+ char *pcTmp = getenv ("ethaddr");
+ char *pcEnd;
+ int i;
+
+ DEBUG_FN (DEBUG_INIT);
+
+ /* no need to check for hardware */
+
+ if (!ns9750_eth_reset ())
+ return -1;
+
+ if (pcTmp != NULL)
+ for (i = 0; i < 6; i++) {
+ aucMACAddr[i] =
+ pcTmp ? simple_strtoul (pcTmp, &pcEnd,
+ 16) : 0;
+ pcTmp = (*pcTmp) ? pcEnd + 1 : pcEnd;
+ }
+
+ /* configure ethernet address */
+
+ *get_eth_reg_addr (NS9750_ETH_SA1) =
+ aucMACAddr[5] << 8 | aucMACAddr[4];
+ *get_eth_reg_addr (NS9750_ETH_SA2) =
+ aucMACAddr[3] << 8 | aucMACAddr[2];
+ *get_eth_reg_addr (NS9750_ETH_SA3) =
+ aucMACAddr[1] << 8 | aucMACAddr[0];
+
+ /* enable hardware */
+
+ *get_eth_reg_addr (NS9750_ETH_MAC1) = NS9750_ETH_MAC1_RXEN;
+
+ /* the linux kernel may give packets < 60 bytes, for example arp */
+ *get_eth_reg_addr (NS9750_ETH_MAC2) = NS9750_ETH_MAC2_CRCEN |
+ NS9750_ETH_MAC2_PADEN | NS9750_ETH_MAC2_HUGE;
+
+ /* enable receive and transmit FIFO, use 10/100 Mbps MII */
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) =
+ NS9750_ETH_EGCR1_ETXWM |
+ NS9750_ETH_EGCR1_ERX |
+ NS9750_ETH_EGCR1_ERXDMA |
+ NS9750_ETH_EGCR1_ETX |
+ NS9750_ETH_EGCR1_ETXDMA | NS9750_ETH_EGCR1_ITXA;
+
+ /* prepare DMA descriptors */
+ for (i = 0; i < 4; i++) {
+ aRxBufferDesc[i].punSrc = 0;
+ aRxBufferDesc[i].unLen = 0;
+ aRxBufferDesc[i].s.bits.uWrap = 1;
+ aRxBufferDesc[i].s.bits.uInt = 1;
+ aRxBufferDesc[i].s.bits.uEnable = 0;
+ aRxBufferDesc[i].s.bits.uFull = 0;
+ }
+
+ /* NetRxPackets[ 0 ] is initialized before eth_init is called and never
+ changes. NetRxPackets is 32bit aligned */
+ aRxBufferDesc[0].punSrc = (unsigned int *) NetRxPackets[0];
+ aRxBufferDesc[0].s.bits.uEnable = 1;
+ aRxBufferDesc[0].unLen = 1522; /* as stated in [1] p.307 */
+
+ *get_eth_reg_addr (NS9750_ETH_RXAPTR) =
+ (unsigned int) &aRxBufferDesc[0];
+
+ /* [1] Tab. 221 states less than 5us */
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) |= NS9750_ETH_EGCR1_ERXINIT;
+ while (!
+ (*get_eth_reg_addr (NS9750_ETH_EGSR) & NS9750_ETH_EGSR_RXINIT))
+ /* wait for finish */
+ udelay (1);
+
+ /* @TODO do we need to clear RXINIT? */
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) &= ~NS9750_ETH_EGCR1_ERXINIT;
+
+ *get_eth_reg_addr (NS9750_ETH_RXFREE) = 0x1;
+
+ return 0;
+}
+
+/***********************************************************************
+ * @Function: eth_send
+ * @Return: -1 on timeout otherwise 1
+ * @Descr: sends one frame by DMA
+ ***********************************************************************/
+
+int eth_send (volatile void *pPacket, int nLen)
+{
+ ulong ulTimeout;
+
+ DEBUG_FN (DEBUG_TX);
+
+ /* clear old status values */
+ *get_eth_reg_addr (NS9750_ETH_EINTR) &=
+ *get_eth_reg_addr (NS9750_ETH_EINTR) & NS9750_ETH_EINTR_TX_MA;
+
+ /* prepare Tx Descriptors */
+
+ pTxBufferDesc->punSrc = (unsigned int *) pPacket; /* pPacket is 32bit
+ * aligned */
+ pTxBufferDesc->unLen = nLen;
+ /* only 32bit accesses allowed. wrap, full, interrupt and enabled to 1 */
+ pTxBufferDesc->s.unReg = 0xf0000000;
+ /* pTxBufferDesc is the first possible buffer descriptor */
+ *get_eth_reg_addr (NS9750_ETH_TXPTR) = 0x0;
+
+ /* enable processor for next frame */
+
+ *get_eth_reg_addr (NS9750_ETH_EGCR2) &= ~NS9750_ETH_EGCR2_TCLER;
+ *get_eth_reg_addr (NS9750_ETH_EGCR2) |= NS9750_ETH_EGCR2_TCLER;
+
+ ulTimeout = get_timer (0);
+
+ DEBUG_ARGS0 (DEBUG_TX | DEBUG_MINOR,
+ "Waiting for transmission to finish\n");
+ while (!
+ (*get_eth_reg_addr (NS9750_ETH_EINTR) &
+ (NS9750_ETH_EINTR_TXDONE | NS9750_ETH_EINTR_TXERR))) {
+ /* do nothing, wait for completion */
+ if (get_timer (0) - ulTimeout > TX_TIMEOUT) {
+ DEBUG_ARGS0 (DEBUG_TX, "Transmit Timed out\n");
+ return -1;
+ }
+ }
+ DEBUG_ARGS0 (DEBUG_TX | DEBUG_MINOR, "transmitted...\n");
+
+ return 0;
+}
+
+/***********************************************************************
+ * @Function: eth_rx
+ * @Return: size of last frame in bytes or 0 if no frame available
+ * @Descr: gives one frame to U-Boot which has been copied by DMA engine already
+ * to NetRxPackets[ 0 ].
+ ***********************************************************************/
+
+int eth_rx (void)
+{
+ int nLen = 0;
+ unsigned int unStatus;
+
+ unStatus =
+ *get_eth_reg_addr (NS9750_ETH_EINTR) & NS9750_ETH_EINTR_RX_MA;
+
+ if (!unStatus)
+ /* no packet available, return immediately */
+ return 0;
+
+ DEBUG_FN (DEBUG_RX);
+
+ /* unLen always < max(nLen) and discard checksum */
+ nLen = (int) aRxBufferDesc[0].unLen - 4;
+
+ /* acknowledge status register */
+ *get_eth_reg_addr (NS9750_ETH_EINTR) = unStatus;
+
+ aRxBufferDesc[0].unLen = 1522;
+ aRxBufferDesc[0].s.bits.uFull = 0;
+
+ /* Buffer A descriptor available again */
+ *get_eth_reg_addr (NS9750_ETH_RXFREE) |= 0x1;
+
+ /* NetReceive may call eth_send. Due to a possible bug of the NS9750 we
+ * have to acknowledge the received frame before sending a new one */
+ if (unStatus & NS9750_ETH_EINTR_RXDONEA)
+ NetReceive (NetRxPackets[0], nLen);
+
+ return nLen;
+}
+
+/***********************************************************************
+ * @Function: eth_halt
+ * @Return: n/a
+ * @Descr: stops the ethernet engine
+ ***********************************************************************/
+
+void eth_halt (void)
+{
+ DEBUG_FN (DEBUG_INIT);
+
+ *get_eth_reg_addr (NS9750_ETH_MAC1) &= ~NS9750_ETH_MAC1_RXEN;
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) &= ~(NS9750_ETH_EGCR1_ERX |
+ NS9750_ETH_EGCR1_ERXDMA |
+ NS9750_ETH_EGCR1_ETX |
+ NS9750_ETH_EGCR1_ETXDMA);
+}
+
+/***********************************************************************
+ * @Function: ns9750_eth_reset
+ * @Return: 0 on failure otherwise 1
+ * @Descr: resets the ethernet interface and the PHY,
+ * performs auto negotiation or fixed modes
+ ***********************************************************************/
+
+static int ns9750_eth_reset (void)
+{
+ DEBUG_FN (DEBUG_MINOR);
+
+ /* Reset MAC */
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) |= NS9750_ETH_EGCR1_MAC_HRST;
+ udelay (5); /* according to [1], p.322 */
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) &= ~NS9750_ETH_EGCR1_MAC_HRST;
+
+ /* reset and initialize PHY */
+
+ *get_eth_reg_addr (NS9750_ETH_MAC1) &= ~NS9750_ETH_MAC1_SRST;
+
+ /* we don't support hot plugging of PHY, therefore we don't reset
+ phyDetected and nPhyMaxMdioClock here. The risk is if the setting is
+ incorrect the first open
+ may detect the PHY correctly but succeding will fail
+ For reseting the PHY and identifying we have to use the standard
+ MDIO CLOCK value 2.5 MHz only after hardware reset
+ After having identified the PHY we will do faster */
+
+ *get_eth_reg_addr (NS9750_ETH_MCFG) =
+ ns9750_mii_get_clock_divisor (nPhyMaxMdioClock);
+
+ /* reset PHY */
+ ns9750_mii_write (PHY_COMMON_CTRL, PHY_COMMON_CTRL_RESET);
+ ns9750_mii_write (PHY_COMMON_CTRL, 0);
+
+ /* @TODO check time */
+ udelay (3000); /* [2] p.70 says at least 300us reset recovery time. But
+ go sure, it didn't worked stable at higher timer
+ frequencies under LxNETES-2.x */
+
+ /* MII clock has been setup to default, ns9750_mii_identify_phy should
+ work for all */
+
+ if (!ns9750_mii_identify_phy ()) {
+ printk (KERN_ERR NS9750_DRIVER_NAME
+ ": Unsupported PHY, aborting\n");
+ return 0;
+ }
+
+ /* now take the highest MDIO clock possible after detection */
+ *get_eth_reg_addr (NS9750_ETH_MCFG) =
+ ns9750_mii_get_clock_divisor (nPhyMaxMdioClock);
+
+
+ /* PHY has been detected, so there can be no abort reason and we can
+ finish initializing ethernet */
+
+ uiLastLinkStatus = 0xff; /* undefined */
+
+ if ((ucLinkMode & FS_EEPROM_AUTONEG_ENABLE_MASK) ==
+ FS_EEPROM_AUTONEG_DISABLE)
+ /* use parameters defined */
+ ns9750_link_force ();
+ else
+ ns9750_link_auto_negotiate ();
+
+ if (phyDetected == PHY_LXT971A)
+ /* set LED2 to link mode */
+ ns9750_mii_write (PHY_LXT971_LED_CFG,
+ PHY_LXT971_LED_CFG_LINK_ACT <<
+ PHY_LXT971_LED_CFG_SHIFT_LED2);
+
+ return 1;
+}
+
+/***********************************************************************
+ * @Function: ns9750_link_force
+ * @Return: void
+ * @Descr: configures eth and MII to use the link mode defined in
+ * ucLinkMode
+ ***********************************************************************/
+
+static void ns9750_link_force (void)
+{
+ unsigned short uiControl;
+
+ DEBUG_FN (DEBUG_LINK);
+
+ uiControl = ns9750_mii_read (PHY_COMMON_CTRL);
+ uiControl &= ~(PHY_COMMON_CTRL_SPD_MA |
+ PHY_COMMON_CTRL_AUTO_NEG | PHY_COMMON_CTRL_DUPLEX);
+
+ uiLastLinkStatus = 0;
+
+ if ((ucLinkMode & FS_EEPROM_AUTONEG_SPEED_MASK) ==
+ FS_EEPROM_AUTONEG_SPEED_100) {
+ uiControl |= PHY_COMMON_CTRL_SPD_100;
+ uiLastLinkStatus |= PHY_LXT971_STAT2_100BTX;
+ } else
+ uiControl |= PHY_COMMON_CTRL_SPD_10;
+
+ if ((ucLinkMode & FS_EEPROM_AUTONEG_DUPLEX_MASK) ==
+ FS_EEPROM_AUTONEG_DUPLEX_FULL) {
+ uiControl |= PHY_COMMON_CTRL_DUPLEX;
+ uiLastLinkStatus |= PHY_LXT971_STAT2_DUPLEX_MODE;
+ }
+
+ ns9750_mii_write (PHY_COMMON_CTRL, uiControl);
+
+ ns9750_link_print_changed ();
+ ns9750_link_update_egcr ();
+}
+
+/***********************************************************************
+ * @Function: ns9750_link_auto_negotiate
+ * @Return: void
+ * @Descr: performs auto-negotation of link.
+ ***********************************************************************/
+
+static void ns9750_link_auto_negotiate (void)
+{
+ unsigned long ulStartJiffies;
+ unsigned short uiStatus;
+
+ DEBUG_FN (DEBUG_LINK);
+
+ /* run auto-negotation */
+ /* define what we are capable of */
+ ns9750_mii_write (PHY_COMMON_AUTO_ADV,
+ PHY_COMMON_AUTO_ADV_100BTXFD |
+ PHY_COMMON_AUTO_ADV_100BTX |
+ PHY_COMMON_AUTO_ADV_10BTFD |
+ PHY_COMMON_AUTO_ADV_10BT |
+ PHY_COMMON_AUTO_ADV_802_3);
+ /* start auto-negotiation */
+ ns9750_mii_write (PHY_COMMON_CTRL,
+ PHY_COMMON_CTRL_AUTO_NEG |
+ PHY_COMMON_CTRL_RES_AUTO);
+
+ /* wait for completion */
+
+ ulStartJiffies = get_ticks ();
+ while (get_ticks () < ulStartJiffies + NS9750_MII_NEG_DELAY) {
+ uiStatus = ns9750_mii_read (PHY_COMMON_STAT);
+ if ((uiStatus &
+ (PHY_COMMON_STAT_AN_COMP | PHY_COMMON_STAT_LNK_STAT)) ==
+ (PHY_COMMON_STAT_AN_COMP | PHY_COMMON_STAT_LNK_STAT)) {
+ /* lucky we are, auto-negotiation succeeded */
+ ns9750_link_print_changed ();
+ ns9750_link_update_egcr ();
+ return;
+ }
+ }
+
+ DEBUG_ARGS0 (DEBUG_LINK, "auto-negotiation timed out\n");
+ /* ignore invalid link settings */
+}
+
+/***********************************************************************
+ * @Function: ns9750_link_update_egcr
+ * @Return: void
+ * @Descr: updates the EGCR and MAC2 link status after mode change or
+ * auto-negotation
+ ***********************************************************************/
+
+static void ns9750_link_update_egcr (void)
+{
+ unsigned int unEGCR;
+ unsigned int unMAC2;
+ unsigned int unIPGT;
+
+ DEBUG_FN (DEBUG_LINK);
+
+ unEGCR = *get_eth_reg_addr (NS9750_ETH_EGCR1);
+ unMAC2 = *get_eth_reg_addr (NS9750_ETH_MAC2);
+ unIPGT = *get_eth_reg_addr (NS9750_ETH_IPGT) & ~NS9750_ETH_IPGT_MA;
+
+ unMAC2 &= ~NS9750_ETH_MAC2_FULLD;
+ if ((uiLastLinkStatus & PHY_LXT971_STAT2_DUPLEX_MODE)
+ == PHY_LXT971_STAT2_DUPLEX_MODE) {
+ unMAC2 |= NS9750_ETH_MAC2_FULLD;
+ unIPGT |= 0x15; /* see [1] p. 339 */
+ } else
+ unIPGT |= 0x12; /* see [1] p. 339 */
+
+ *get_eth_reg_addr (NS9750_ETH_MAC2) = unMAC2;
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) = unEGCR;
+ *get_eth_reg_addr (NS9750_ETH_IPGT) = unIPGT;
+}
+
+/***********************************************************************
+ * @Function: ns9750_link_print_changed
+ * @Return: void
+ * @Descr: checks whether the link status has changed and if so prints
+ * the new mode
+ ***********************************************************************/
+
+static void ns9750_link_print_changed (void)
+{
+ unsigned short uiStatus;
+ unsigned short uiControl;
+
+ DEBUG_FN (DEBUG_LINK);
+
+ uiControl = ns9750_mii_read (PHY_COMMON_CTRL);
+
+ if ((uiControl & PHY_COMMON_CTRL_AUTO_NEG) ==
+ PHY_COMMON_CTRL_AUTO_NEG) {
+ /* PHY_COMMON_STAT_LNK_STAT is only set on autonegotiation */
+ uiStatus = ns9750_mii_read (PHY_COMMON_STAT);
+
+ if (!(uiStatus & PHY_COMMON_STAT_LNK_STAT)) {
+ printk (KERN_WARNING NS9750_DRIVER_NAME
+ ": link down\n");
+ /* @TODO Linux: carrier_off */
+ } else {
+ /* @TODO Linux: carrier_on */
+ if (phyDetected == PHY_LXT971A) {
+ uiStatus = ns9750_mii_read (PHY_LXT971_STAT2);
+ uiStatus &= (PHY_LXT971_STAT2_100BTX |
+ PHY_LXT971_STAT2_DUPLEX_MODE |
+ PHY_LXT971_STAT2_AUTO_NEG);
+
+ /* mask out all uninteresting parts */
+ }
+ /* other PHYs must store there link information in
+ uiStatus as PHY_LXT971 */
+ }
+ } else {
+ /* mode has been forced, so uiStatus should be the same as the
+ last link status, enforce printing */
+ uiStatus = uiLastLinkStatus;
+ uiLastLinkStatus = 0xff;
+ }
+
+ if (uiStatus != uiLastLinkStatus) {
+ /* save current link status */
+ uiLastLinkStatus = uiStatus;
+
+ /* print new link status */
+
+ printk (KERN_INFO NS9750_DRIVER_NAME
+ ": link mode %i Mbps %s duplex %s\n",
+ (uiStatus & PHY_LXT971_STAT2_100BTX) ? 100 : 10,
+ (uiStatus & PHY_LXT971_STAT2_DUPLEX_MODE) ? "full" :
+ "half",
+ (uiStatus & PHY_LXT971_STAT2_AUTO_NEG) ? "(auto)" :
+ "");
+ }
+}
+
+/***********************************************************************
+ * the MII low level stuff
+ ***********************************************************************/
+
+/***********************************************************************
+ * @Function: ns9750_mii_identify_phy
+ * @Return: 1 if supported PHY has been detected otherwise 0
+ * @Descr: checks for supported PHY and prints the IDs.
+ ***********************************************************************/
+
+static char ns9750_mii_identify_phy (void)
+{
+ unsigned short uiID1;
+ unsigned short uiID2;
+ unsigned char *szName;
+ char cRes = 0;
+
+ DEBUG_FN (DEBUG_MII);
+
+ phyDetected = (PhyType) uiID1 = ns9750_mii_read (PHY_COMMON_ID1);
+
+ switch (phyDetected) {
+ case PHY_LXT971A:
+ szName = "LXT971A";
+ uiID2 = ns9750_mii_read (PHY_COMMON_ID2);
+ nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK;
+ cRes = 1;
+ break;
+ case PHY_NONE:
+ default:
+ /* in case uiID1 == 0 && uiID2 == 0 we may have the wrong
+ address or reset sets the wrong NS9750_ETH_MCFG_CLKS */
+
+ uiID2 = 0;
+ szName = "unknown";
+ nPhyMaxMdioClock = PHY_MDIO_MAX_CLK;
+ phyDetected = PHY_NONE;
+ }
+
+ printk (KERN_INFO NS9750_DRIVER_NAME
+ ": PHY (0x%x, 0x%x) = %s detected\n", uiID1, uiID2, szName);
+
+ return cRes;
+}
+
+/***********************************************************************
+ * @Function: ns9750_mii_read
+ * @Return: the data read from PHY register uiRegister
+ * @Descr: the data read may be invalid if timed out. If so, a message
+ * is printed but the invalid data is returned.
+ * The fixed device address is being used.
+ ***********************************************************************/
+
+static unsigned short ns9750_mii_read (unsigned short uiRegister)
+{
+ DEBUG_FN (DEBUG_MII_LOW);
+
+ /* write MII register to be read */
+ *get_eth_reg_addr (NS9750_ETH_MADR) =
+ NS9750_ETH_PHY_ADDRESS << 8 | uiRegister;
+
+ *get_eth_reg_addr (NS9750_ETH_MCMD) = NS9750_ETH_MCMD_READ;
+
+ if (!ns9750_mii_poll_busy ())
+ printk (KERN_WARNING NS9750_DRIVER_NAME
+ ": MII still busy in read\n");
+ /* continue to read */
+
+ *get_eth_reg_addr (NS9750_ETH_MCMD) = 0;
+
+ return (unsigned short) (*get_eth_reg_addr (NS9750_ETH_MRDD));
+}
+
+
+/***********************************************************************
+ * @Function: ns9750_mii_write
+ * @Return: nothing
+ * @Descr: writes the data to the PHY register. In case of a timeout,
+ * no special handling is performed but a message printed
+ * The fixed device address is being used.
+ ***********************************************************************/
+
+static void ns9750_mii_write (unsigned short uiRegister,
+ unsigned short uiData)
+{
+ DEBUG_FN (DEBUG_MII_LOW);
+
+ /* write MII register to be written */
+ *get_eth_reg_addr (NS9750_ETH_MADR) =
+ NS9750_ETH_PHY_ADDRESS << 8 | uiRegister;
+
+ *get_eth_reg_addr (NS9750_ETH_MWTD) = uiData;
+
+ if (!ns9750_mii_poll_busy ()) {
+ printf (KERN_WARNING NS9750_DRIVER_NAME
+ ": MII still busy in write\n");
+ }
+}
+
+
+/***********************************************************************
+ * @Function: ns9750_mii_get_clock_divisor
+ * @Return: the clock divisor that should be used in NS9750_ETH_MCFG_CLKS
+ * @Descr: if no clock divisor can be calculated for the
+ * current SYSCLK and the maximum MDIO Clock, a warning is printed
+ * and the greatest divisor is taken
+ ***********************************************************************/
+
+static unsigned int ns9750_mii_get_clock_divisor (unsigned int unMaxMDIOClk)
+{
+ struct {
+ unsigned int unSysClkDivisor;
+ unsigned int unClks; /* field for NS9750_ETH_MCFG_CLKS */
+ } PHYClockDivisors[] = {
+ {
+ 4, NS9750_ETH_MCFG_CLKS_4}, {
+ 6, NS9750_ETH_MCFG_CLKS_6}, {
+ 8, NS9750_ETH_MCFG_CLKS_8}, {
+ 10, NS9750_ETH_MCFG_CLKS_10}, {
+ 20, NS9750_ETH_MCFG_CLKS_20}, {
+ 30, NS9750_ETH_MCFG_CLKS_30}, {
+ 40, NS9750_ETH_MCFG_CLKS_40}
+ };
+
+ int nIndexSysClkDiv;
+ int nArraySize =
+ sizeof (PHYClockDivisors) / sizeof (PHYClockDivisors[0]);
+ unsigned int unClks = NS9750_ETH_MCFG_CLKS_40; /* defaults to
+ greatest div */
+
+ DEBUG_FN (DEBUG_INIT);
+
+ for (nIndexSysClkDiv = 0; nIndexSysClkDiv < nArraySize;
+ nIndexSysClkDiv++) {
+ /* find first sysclock divisor that isn't higher than 2.5 MHz
+ clock */
+ if (AHB_CLK_FREQ /
+ PHYClockDivisors[nIndexSysClkDiv].unSysClkDivisor <=
+ unMaxMDIOClk) {
+ unClks = PHYClockDivisors[nIndexSysClkDiv].unClks;
+ break;
+ }
+ }
+
+ DEBUG_ARGS2 (DEBUG_INIT,
+ "Taking MDIO Clock bit mask 0x%0x for max clock %i\n",
+ unClks, unMaxMDIOClk);
+
+ /* return greatest divisor */
+ return unClks;
+}
+
+/***********************************************************************
+ * @Function: ns9750_mii_poll_busy
+ * @Return: 0 if timed out otherwise the remaing timeout
+ * @Descr: waits until the MII has completed a command or it times out
+ * code may be interrupted by hard interrupts.
+ * It is not checked what happens on multiple actions when
+ * the first is still being busy and we timeout.
+ ***********************************************************************/
+
+static unsigned int ns9750_mii_poll_busy (void)
+{
+ unsigned int unTimeout = 10000;
+
+ DEBUG_FN (DEBUG_MII_LOW);
+
+ while (((*get_eth_reg_addr (NS9750_ETH_MIND) & NS9750_ETH_MIND_BUSY)
+ == NS9750_ETH_MIND_BUSY) && unTimeout)
+ unTimeout--;
+
+ return unTimeout;
+}
+
+#endif /* CONFIG_DRIVER_NS9750_ETHERNET */