diff options
Diffstat (limited to 'drivers/net/sh_eth.c')
| -rw-r--r-- | drivers/net/sh_eth.c | 22 |
1 files changed, 9 insertions, 13 deletions
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 0e8cacb..e6ab662 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -1,5 +1,5 @@ /* - * sh_eth.c - Driver for Renesas SH7763's ethernet controler. + * sh_eth.c - Driver for Renesas ethernet controler. * * Copyright (C) 2008, 2011 Renesas Solutions Corp. * Copyright (c) 2008, 2011 Nobuhiro Iwamatsu @@ -138,7 +138,7 @@ int sh_eth_recv(struct eth_device *dev) static int sh_eth_reset(struct sh_eth_dev *eth) { int port = eth->port; -#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734) +#if defined(SH_ETH_TYPE_GETHER) int ret = 0, i; /* Start e-dmac transmitter and receiver */ @@ -208,7 +208,7 @@ static int sh_eth_tx_desc_init(struct sh_eth_dev *eth) /* Point the controller to the tx descriptor list. Must use physical addresses */ outl(ADDR_TO_PHY(port_info->tx_desc_base), TDLAR(port)); -#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734) +#if defined(SH_ETH_TYPE_GETHER) outl(ADDR_TO_PHY(port_info->tx_desc_base), TDFAR(port)); outl(ADDR_TO_PHY(cur_tx_desc), TDFXR(port)); outl(0x01, TDFFR(port));/* Last discriptor bit */ @@ -276,7 +276,7 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth) /* Point the controller to the rx descriptor list */ outl(ADDR_TO_PHY(port_info->rx_desc_base), RDLAR(port)); -#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734) +#if defined(SH_ETH_TYPE_GETHER) outl(ADDR_TO_PHY(port_info->rx_desc_base), RDFAR(port)); outl(ADDR_TO_PHY(cur_rx_desc), RDFXR(port)); outl(RDFFR_RDLF, RDFFR(port)); @@ -370,7 +370,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) outl(0, TFTR(port)); outl((FIFO_SIZE_T | FIFO_SIZE_R), FDR(port)); outl(RMCR_RST, RMCR(port)); -#if !defined(CONFIG_CPU_SH7757) && !defined(CONFIG_CPU_SH7724) +#if defined(SH_ETH_TYPE_GETHER) outl(0, RPADIR(port)); #endif outl((FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR(port)); @@ -387,14 +387,10 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) outl(val, MALR(port)); outl(RFLR_RFL_MIN, RFLR(port)); -#if !defined(CONFIG_CPU_SH7757) && !defined(CONFIG_CPU_SH7724) +#if defined(SH_ETH_TYPE_GETHER) outl(0, PIPR(port)); -#endif -#if !defined(CONFIG_CPU_SH7724) && !defined(CONFIG_CPU_SH7757) outl(APR_AP, APR(port)); outl(MPR_MP, MPR(port)); -#endif -#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734) outl(TPAUSER_TPAUSE, TPAUSER(port)); #endif @@ -419,7 +415,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) /* Set the transfer speed */ if (phy->speed == 100) { printf(SHETHER_NAME ": 100Base/"); -#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734) +#if defined(SH_ETH_TYPE_GETHER) outl(GECMR_100B, GECMR(port)); #elif defined(CONFIG_CPU_SH7757) outl(1, RTRATE(port)); @@ -428,13 +424,13 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) #endif } else if (phy->speed == 10) { printf(SHETHER_NAME ": 10Base/"); -#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734) +#if defined(SH_ETH_TYPE_GETHER) outl(GECMR_10B, GECMR(port)); #elif defined(CONFIG_CPU_SH7757) outl(0, RTRATE(port)); #endif } -#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734) +#if defined(SH_ETH_TYPE_GETHER) else if (phy->speed == 1000) { printf(SHETHER_NAME ": 1000Base/"); outl(GECMR_1000B, GECMR(port)); |