summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/3c589.c519
-rw-r--r--drivers/net/3c589.h435
-rw-r--r--drivers/net/5701rls.c46
-rw-r--r--drivers/net/5701rls.h198
-rw-r--r--drivers/net/8390.h124
-rw-r--r--drivers/net/Makefile33
-rw-r--r--drivers/net/bcm570x.c1603
-rw-r--r--drivers/net/bcm570x_autoneg.c439
-rw-r--r--drivers/net/bcm570x_autoneg.h408
-rw-r--r--drivers/net/bcm570x_bits.h57
-rw-r--r--drivers/net/bcm570x_debug.h109
-rw-r--r--drivers/net/bcm570x_lm.h434
-rw-r--r--drivers/net/bcm570x_mm.h158
-rw-r--r--drivers/net/bcm570x_queue.h387
-rw-r--r--drivers/net/cs8900.c322
-rw-r--r--drivers/net/cs8900.h258
-rw-r--r--drivers/net/dc2114x.c771
-rw-r--r--drivers/net/dm9000x.c620
-rw-r--r--drivers/net/dm9000x.h119
-rw-r--r--drivers/net/e1000.c3016
-rw-r--r--drivers/net/e1000.h1758
-rw-r--r--drivers/net/eepro100.c948
-rw-r--r--drivers/net/enc28j60.c983
-rw-r--r--drivers/net/inca-ip_sw.c817
-rw-r--r--drivers/net/ks8695eth.c238
-rw-r--r--drivers/net/lan91c96.c967
-rw-r--r--drivers/net/lan91c96.h643
-rw-r--r--drivers/net/macb.c587
-rw-r--r--drivers/net/macb.h269
-rw-r--r--drivers/net/natsemi.c882
-rw-r--r--drivers/net/ne2000.c940
-rw-r--r--drivers/net/ne2000.h279
-rw-r--r--drivers/net/netarm_eth.c360
-rw-r--r--drivers/net/netarm_eth.h42
-rw-r--r--drivers/net/netconsole.c267
-rw-r--r--drivers/net/nicext.h109
-rw-r--r--drivers/net/ns7520_eth.c859
-rw-r--r--drivers/net/ns8382x.c863
-rw-r--r--drivers/net/ns9750_eth.c797
-rw-r--r--drivers/net/pcnet.c526
-rw-r--r--drivers/net/plb2800_eth.c396
-rw-r--r--drivers/net/rtl8019.c282
-rw-r--r--drivers/net/rtl8019.h117
-rw-r--r--drivers/net/rtl8139.c547
-rw-r--r--drivers/net/rtl8169.c888
-rw-r--r--drivers/net/s3c4510b_eth.c246
-rw-r--r--drivers/net/s3c4510b_eth.h302
-rw-r--r--drivers/net/sk98lin/Makefile120
-rw-r--r--drivers/net/sk98lin/h/lm80.h197
-rw-r--r--drivers/net/sk98lin/h/skaddr.h425
-rw-r--r--drivers/net/sk98lin/h/skcsum.h261
-rw-r--r--drivers/net/sk98lin/h/skdebug.h119
-rw-r--r--drivers/net/sk98lin/h/skdrv1st.h264
-rw-r--r--drivers/net/sk98lin/h/skdrv2nd.h561
-rw-r--r--drivers/net/sk98lin/h/skerror.h80
-rw-r--r--drivers/net/sk98lin/h/skgedrv.h72
-rw-r--r--drivers/net/sk98lin/h/skgehw.h2336
-rw-r--r--drivers/net/sk98lin/h/skgehwt.h74
-rw-r--r--drivers/net/sk98lin/h/skgei2c.h299
-rw-r--r--drivers/net/sk98lin/h/skgeinit.h1113
-rw-r--r--drivers/net/sk98lin/h/skgepnm2.h462
-rw-r--r--drivers/net/sk98lin/h/skgepnmi.h1114
-rw-r--r--drivers/net/sk98lin/h/skgesirq.h194
-rw-r--r--drivers/net/sk98lin/h/ski2c.h292
-rw-r--r--drivers/net/sk98lin/h/skqueue.h147
-rw-r--r--drivers/net/sk98lin/h/skrlmt.h563
-rw-r--r--drivers/net/sk98lin/h/sktimer.h99
-rw-r--r--drivers/net/sk98lin/h/sktypes.h87
-rw-r--r--drivers/net/sk98lin/h/skversion.h52
-rw-r--r--drivers/net/sk98lin/h/skvpd.h335
-rw-r--r--drivers/net/sk98lin/h/xmac_ii.h1738
-rw-r--r--drivers/net/sk98lin/skaddr.c1879
-rw-r--r--drivers/net/sk98lin/skcsum.c929
-rw-r--r--drivers/net/sk98lin/skge.c4864
-rw-r--r--drivers/net/sk98lin/skgehwt.c220
-rw-r--r--drivers/net/sk98lin/skgeinit.c2372
-rw-r--r--drivers/net/sk98lin/skgemib.c1060
-rw-r--r--drivers/net/sk98lin/skgepnmi.c8310
-rw-r--r--drivers/net/sk98lin/skgesirq.c2417
-rw-r--r--drivers/net/sk98lin/ski2c.c1505
-rw-r--r--drivers/net/sk98lin/sklm80.c292
-rw-r--r--drivers/net/sk98lin/skproc.c515
-rw-r--r--drivers/net/sk98lin/skqueue.c242
-rw-r--r--drivers/net/sk98lin/skrlmt.c3508
-rw-r--r--drivers/net/sk98lin/sktimer.c297
-rw-r--r--drivers/net/sk98lin/skvpd.c1329
-rw-r--r--drivers/net/sk98lin/skxmac2.c4396
-rw-r--r--drivers/net/sk98lin/u-boot_compat.h98
-rw-r--r--drivers/net/sk98lin/uboot_drv.c143
-rw-r--r--drivers/net/sk98lin/uboot_skb.c122
-rw-r--r--drivers/net/smc91111.c1623
-rw-r--r--drivers/net/smc91111.h719
-rw-r--r--drivers/net/tigon3.c5699
-rw-r--r--drivers/net/tigon3.h3339
-rw-r--r--drivers/net/tsec.c1590
-rw-r--r--drivers/net/tsec.h563
-rw-r--r--drivers/net/tsi108_eth.c1036
-rw-r--r--drivers/net/uli526x.c996
98 files changed, 87034 insertions, 1 deletions
diff --git a/drivers/net/3c589.c b/drivers/net/3c589.c
new file mode 100644
index 0000000..080b686
--- /dev/null
+++ b/drivers/net/3c589.c
@@ -0,0 +1,519 @@
+/*------------------------------------------------------------------------
+ . 3c589.c
+ . This is a driver for 3Com's 3C589 (Etherlink III) PCMCIA Ethernet device.
+ .
+ . (C) Copyright 2002
+ . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ . Rolf Offermanns <rof@sysgo.de>
+ .
+ . This program is free software; you can redistribute it and/or modify
+ . it under the terms of the GNU General Public License as published by
+ . the Free Software Foundation; either version 2 of the License, or
+ . (at your option) any later version.
+ .
+ . This program is distributed in the hope that it will be useful,
+ . but WITHOUT ANY WARRANTY; without even the implied warranty of
+ . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ . GNU General Public License for more details.
+ .
+ . You should have received a copy of the GNU General Public License
+ . along with this program; if not, write to the Free Software
+ . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ .
+ ----------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+
+#ifdef CONFIG_DRIVER_3C589
+
+#include "3c589.h"
+
+
+/* Use power-down feature of the chip */
+#define POWER_DOWN 0
+
+#define NO_AUTOPROBE
+
+static const char version[] =
+ "Your ad here! :P\n";
+
+
+#undef EL_DEBUG
+
+typedef unsigned char byte;
+typedef unsigned short word;
+typedef unsigned long int dword;
+/*------------------------------------------------------------------------
+ .
+ . Configuration options, for the experienced user to change.
+ .
+ -------------------------------------------------------------------------*/
+
+/*
+ . Wait time for memory to be free. This probably shouldn't be
+ . tuned that much, as waiting for this means nothing else happens
+ . in the system
+*/
+#define MEMORY_WAIT_TIME 16
+
+
+#if (EL_DEBUG > 2 )
+#define PRINTK3(args...) printf(args)
+#else
+#define PRINTK3(args...)
+#endif
+
+#if EL_DEBUG > 1
+#define PRINTK2(args...) printf(args)
+#else
+#define PRINTK2(args...)
+#endif
+
+#ifdef EL_DEBUG
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+#define outb(args...) mmio_outb(args)
+#define mmio_outb(value, addr) (*((volatile byte *)(addr)) = value)
+
+#define inb(args...) mmio_inb(args)
+#define mmio_inb(addr) (*((volatile byte *)(addr)))
+
+#define outw(args...) mmio_outw(args)
+#define mmio_outw(value, addr) (*((volatile word *)(addr)) = value)
+
+#define inw(args...) mmio_inw(args)
+#define mmio_inw(addr) (*((volatile word *)(addr)))
+
+#define outsw(args...) mmio_outsw(args)
+#define mmio_outsw(r,b,l) ({ int __i; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ mmio_outw( *(__b2 + __i), r); \
+ } \
+ })
+
+#define insw(args...) mmio_insw(args)
+#define mmio_insw(r,b,l) ({ int __i ; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = mmio_inw(r); \
+ mmio_inw(0); \
+ }; \
+ })
+
+/*------------------------------------------------------------------------
+ .
+ . The internal workings of the driver. If you are changing anything
+ . here with the 3Com stuff, you should have the datasheet and know
+ . what you are doing.
+ .
+ -------------------------------------------------------------------------*/
+#define EL_BASE_ADDR 0x20000000
+
+
+/* Offsets from base I/O address. */
+#define EL3_DATA 0x00
+#define EL3_TIMER 0x0a
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+
+#define EEPROM_READ 0x0080
+
+#define EL3WINDOW(win_num) mmio_outw(SelectWindow + (win_num), EL_BASE_ADDR + EL3_CMD)
+
+/* The top five bits written to EL3_CMD are a command, the lower
+ 11 bits are the parameter, if applicable. */
+enum c509cmd {
+ TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
+ RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
+ TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
+ FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
+ SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
+ SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
+ StatsDisable = 22<<11, StopCoax = 23<<11,
+};
+
+enum c509status {
+ IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
+ TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+ IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000
+};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+ RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
+};
+
+/* Register window 1 offsets, the window used in normal operation. */
+#define TX_FIFO 0x00
+#define RX_FIFO 0x00
+#define RX_STATUS 0x08
+#define TX_STATUS 0x0B
+#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */
+
+
+/*
+ Read a word from the EEPROM using the regular EEPROM access register.
+ Assume that we are in register window zero.
+*/
+static word read_eeprom(dword ioaddr, int index)
+{
+ int i;
+ outw(EEPROM_READ + index, ioaddr + 0xa);
+ /* Reading the eeprom takes 162 us */
+ for (i = 1620; i >= 0; i--)
+ if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
+ break;
+ return inw(ioaddr + 0xc);
+}
+
+static void el_get_mac_addr( unsigned char *mac_addr )
+{
+ int i;
+ union
+ {
+ word w;
+ unsigned char b[2];
+ } wrd;
+ unsigned char old_window = inw( EL_BASE_ADDR + EL3_STATUS ) >> 13;
+ GO_WINDOW(0);
+ VX_BUSY_WAIT;
+ for (i = 0; i < 3; i++)
+ {
+ wrd.w = read_eeprom(EL_BASE_ADDR, 0xa+i);
+#ifdef __BIG_ENDIAN
+ mac_addr[2*i] = wrd.b[0];
+ mac_addr[2*i+1] = wrd.b[1];
+#else
+ mac_addr[2*i] = wrd.b[1];
+ mac_addr[2*i+1] = wrd.b[0];
+#endif
+ }
+ GO_WINDOW(old_window);
+ VX_BUSY_WAIT;
+}
+
+
+#if EL_DEBUG > 1
+static void print_packet( byte * buf, int length )
+{
+ int i;
+ int remainder;
+ int lines;
+
+ PRINTK2("Packet of length %d \n", length );
+
+ lines = length / 16;
+ remainder = length % 16;
+
+ for ( i = 0; i < lines ; i ++ ) {
+ int cur;
+
+ for ( cur = 0; cur < 8; cur ++ ) {
+ byte a, b;
+
+ a = *(buf ++ );
+ b = *(buf ++ );
+ PRINTK2("%02x%02x ", a, b );
+ }
+ PRINTK2("\n");
+ }
+ for ( i = 0; i < remainder/2 ; i++ ) {
+ byte a, b;
+
+ a = *(buf ++ );
+ b = *(buf ++ );
+ PRINTK2("%02x%02x ", a, b );
+ }
+ PRINTK2("\n");
+}
+#endif /* EL_DEBUG > 1 */
+
+
+/**************************************************************************
+ETH_RESET - Reset adapter
+***************************************************************************/
+static void el_reset(bd_t *bd)
+{
+ /***********************************************************
+ Reset 3Com 595 card
+ *************************************************************/
+ /* QUICK HACK
+ * - adjust timing for 3c589
+ * - enable io for PCMCIA */
+ outw(0x0004, 0xa0000018);
+ udelay(100);
+ outw(0x0041, 0x28010000);
+ udelay(100);
+
+ /* issue global reset */
+ outw(GLOBAL_RESET, BASE + VX_COMMAND);
+
+ /* must wait for at least 1ms */
+ udelay(100000000);
+
+ /* set mac addr */
+ {
+ unsigned char *mac_addr = bd->bi_enetaddr;
+ int i;
+
+ el_get_mac_addr( mac_addr );
+
+ GO_WINDOW(2);
+ VX_BUSY_WAIT;
+
+ printf("3C589 MAC Addr.: ");
+ for (i = 0; i < 6; i++)
+ {
+ printf("%02x", mac_addr[i]);
+ outb(mac_addr[i], BASE + VX_W2_ADDR_0 + i);
+ VX_BUSY_WAIT;
+ }
+ printf("\n\n");
+ }
+
+ /* set RX filter */
+ outw(SET_RX_FILTER | FIL_INDIVIDUAL | FIL_BRDCST, BASE + VX_COMMAND);
+ VX_BUSY_WAIT;
+
+
+ /* set irq mask and read_zero */
+ outw(SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
+ S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
+ VX_BUSY_WAIT;
+
+ outw(SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
+ S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
+ VX_BUSY_WAIT;
+
+ /* enable TP Linkbeat */
+ GO_WINDOW(4);
+ VX_BUSY_WAIT;
+
+ outw( ENABLE_UTP, BASE + VX_W4_MEDIA_TYPE);
+ VX_BUSY_WAIT;
+
+
+/*
+ * Attempt to get rid of any stray interrupts that occured during
+ * configuration. On the i386 this isn't possible because one may
+ * already be queued. However, a single stray interrupt is
+ * unimportant.
+ */
+
+ outw(ACK_INTR | 0xff, BASE + VX_COMMAND);
+ VX_BUSY_WAIT;
+
+ /* enable TX and RX */
+ outw( RX_ENABLE, BASE + VX_COMMAND );
+ VX_BUSY_WAIT;
+
+ outw( TX_ENABLE, BASE + VX_COMMAND );
+ VX_BUSY_WAIT;
+
+
+ /* print the diag. regs. */
+ PRINTK2("Diag. Regs\n");
+ PRINTK2("--> MEDIA_TYPE: %04x\n", inw(BASE + VX_W4_MEDIA_TYPE));
+ PRINTK2("--> NET_DIAG: %04x\n", inw(BASE + VX_W4_NET_DIAG));
+ PRINTK2("--> FIFO_DIAG: %04x\n", inw(BASE + VX_W4_FIFO_DIAG));
+ PRINTK2("--> CTRLR_STATUS: %04x\n", inw(BASE + VX_W4_CTRLR_STATUS));
+ PRINTK2("\n\n");
+
+ /* enter working mode */
+ GO_WINDOW(1);
+ VX_BUSY_WAIT;
+
+ /* wait for another 1ms */
+ udelay(100000000);
+}
+
+
+/*-----------------------------------------------------------------
+ .
+ . The driver can be entered at any of the following entry points.
+ .
+ .------------------------------------------------------------------ */
+
+extern int eth_init(bd_t *bd);
+extern void eth_halt(void);
+extern int eth_rx(void);
+extern int eth_send(volatile void *packet, int length);
+
+
+/*
+ ------------------------------------------------------------
+ .
+ . Internal routines
+ .
+ ------------------------------------------------------------
+*/
+
+int eth_init(bd_t *bd)
+{
+ el_reset(bd);
+ return 0;
+}
+
+void eth_halt() {
+ return;
+}
+
+#define EDEBUG 1
+
+
+/**************************************************************************
+ETH_POLL - Wait for a frame
+***************************************************************************/
+
+int eth_rx()
+{
+ word status, rx_status, packet_size;
+
+ VX_BUSY_WAIT;
+
+ status = inw( BASE + VX_STATUS );
+
+ if ( (status & S_RX_COMPLETE) == 0 ) return 0; /* nothing to do */
+
+ /* Packet waiting -> check RX_STATUS */
+ rx_status = inw( BASE + VX_W1_RX_STATUS );
+
+ if ( rx_status & ERR_RX )
+ {
+ /* error in packet -> discard */
+ PRINTK("[ERROR] Invalid packet -> discarding\n");
+ PRINTK("-- error code 0x%02x\n", rx_status & ERR_MASK);
+ PRINTK("-- rx bytes 0x%04d\n", rx_status & ((1<<11) - 1));
+ PRINTK("[ERROR] Invalid packet -> discarding\n");
+ outw( RX_DISCARD_TOP_PACK, BASE + VX_COMMAND );
+ return 0;
+ }
+
+ /* correct pack. waiting in fifo */
+ packet_size = rx_status & RX_BYTES_MASK;
+
+ PRINTK("Correct packet waiting in fifo, size: %d\n", packet_size);
+
+ {
+ volatile word *packet_start = (word *)(BASE + VX_W1_RX_PIO_RD_1);
+ word *RcvBuffer = (word *)(NetRxPackets[0]);
+ int wcount = 0;
+
+ for (wcount = 0; wcount < (packet_size >> 1); wcount++)
+ {
+ *RcvBuffer++ = *(packet_start);
+ }
+
+ /* handle odd packets */
+ if ( packet_size & 1 )
+ {
+ *RcvBuffer++ = *(packet_start);
+ }
+ }
+
+ /* fifo should now be empty (besides the padding bytes) */
+ if ( ((*((word *)(BASE + VX_W1_RX_STATUS))) & RX_BYTES_MASK) > 3 )
+ {
+ PRINTK("[ERROR] Fifo not empty after packet read (remaining pkts: %d)\n",
+ (((*(word *)(BASE + VX_W1_RX_STATUS))) & RX_BYTES_MASK));
+ }
+
+ /* discard packet */
+ *((word *)(BASE + VX_COMMAND)) = RX_DISCARD_TOP_PACK;
+
+ /* Pass Packets to upper Layer */
+ NetReceive(NetRxPackets[0], packet_size);
+ return packet_size;
+}
+
+
+/**************************************************************************
+ETH_TRANSMIT - Transmit a frame
+***************************************************************************/
+static char padmap[] = {
+ 0, 3, 2, 1};
+
+
+int eth_send(volatile void *packet, int length) {
+ int pad;
+ int status;
+ volatile word *buf = (word *)packet;
+ int dummy = 0;
+
+ /* padding stuff */
+ pad = padmap[length & 3];
+
+ PRINTK("eth_send(), length: %d\n", length);
+ /* drop acknowledgements */
+ while(( status=inb(EL_BASE_ADDR + VX_W1_TX_STATUS) )& TXS_COMPLETE ) {
+ if(status & (TXS_UNDERRUN|TXS_MAX_COLLISION|TXS_STATUS_OVERFLOW)) {
+ outw(TX_RESET, EL_BASE_ADDR + VX_COMMAND);
+ outw(TX_ENABLE, EL_BASE_ADDR + VX_COMMAND);
+ PRINTK("Bad status, resetting and reenabling transmitter\n");
+ }
+
+ outb(0x0, EL_BASE_ADDR + VX_W1_TX_STATUS);
+ }
+
+
+ while (inw(EL_BASE_ADDR + VX_W1_FREE_TX) < length + pad + 4) {
+ /* no room in FIFO */
+ if (dummy == 0)
+ {
+ PRINTK("No room in FIFO, waiting...\n");
+ dummy++;
+ }
+
+ }
+
+ PRINTK(" ---> FIFO ready\n");
+
+
+ outw(length, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
+
+ /* Second dword meaningless */
+ outw(0x0, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
+
+#if EL_DEBUG > 1
+ print_packet((byte *)buf, length);
+#endif
+
+ /* write packet */
+ {
+ unsigned int i, totw;
+
+ totw = ((length + 1) >> 1);
+ PRINTK("Buffer: (totw = %d)\n", totw);
+ for (i = 0; i < totw; i++) {
+ outw( *(buf+i), EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
+ udelay(10);
+ }
+ if(totw & 1)
+ { /* pad to double word length */
+ outw( 0, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
+ udelay(10);
+ }
+ PRINTK("\n\n");
+ }
+
+ /* wait for Tx complete */
+ PRINTK("Waiting for Tx to complete...\n");
+ while(((status = inw(EL_BASE_ADDR + VX_STATUS)) & S_COMMAND_IN_PROGRESS) != 0)
+ {
+ udelay(10);
+ }
+ PRINTK(" ---> Tx completed, status = 0x%04x\n", status);
+
+ return length;
+}
+
+
+#endif /* CONFIG_DRIVER_3C589 */
diff --git a/drivers/net/3c589.h b/drivers/net/3c589.h
new file mode 100644
index 0000000..6735bf9
--- /dev/null
+++ b/drivers/net/3c589.h
@@ -0,0 +1,435 @@
+/*
+ * Copyright (c) 1993 Herb Peyerl (hpeyerl@novatel.ca) All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer. 2. The name
+ * of the author may not be used to endorse or promote products derived from
+ * this software without specific prior written permission
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+ * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ October 2, 1994
+
+ Modified by: Andres Vega Garcia
+
+ INRIA - Sophia Antipolis, France
+ e-mail: avega@sophia.inria.fr
+ finger: avega@pax.inria.fr
+
+ */
+
+/*
+ * Created from if_epreg.h by Fred Gray (fgray@rice.edu) to support the
+ * 3c590 family.
+ */
+
+/*
+ * Modified by Shusuke Nisiyama <shu@athena.qe.eng.hokudai.ac.jp>
+ * for etherboot
+ * Mar. 14, 2000
+*/
+
+/*
+ * Ethernet software status per interface.
+ */
+
+/*
+ * Some global constants
+ */
+
+#define TX_INIT_RATE 16
+#define TX_INIT_MAX_RATE 64
+#define RX_INIT_LATENCY 64
+#define RX_INIT_EARLY_THRESH 64
+#define MIN_RX_EARLY_THRESHF 16 /* not less than ether_header */
+#define MIN_RX_EARLY_THRESHL 4
+
+#define EEPROMSIZE 0x40
+#define MAX_EEPROMBUSY 1000
+#define VX_LAST_TAG 0xd7
+#define VX_MAX_BOARDS 16
+#define VX_ID_PORT 0x100
+
+/*
+ * some macros to acces long named fields
+ */
+#define BASE (EL_BASE_ADDR)
+
+/*
+ * Commands to read/write EEPROM trough EEPROM command register (Window 0,
+ * Offset 0xa)
+ */
+#define EEPROM_CMD_RD 0x0080 /* Read: Address required (5 bits) */
+#define EEPROM_CMD_WR 0x0040 /* Write: Address required (5 bits) */
+#define EEPROM_CMD_ERASE 0x00c0 /* Erase: Address required (5 bits) */
+#define EEPROM_CMD_EWEN 0x0030 /* Erase/Write Enable: No data required */
+
+#define EEPROM_BUSY (1<<15)
+
+/*
+ * Some short functions, worth to let them be a macro
+ */
+
+/**************************************************************************
+ * *
+ * These define the EEPROM data structure. They are used in the probe
+ * function to verify the existence of the adapter after having sent
+ * the ID_Sequence.
+ *
+ * There are others but only the ones we use are defined here.
+ *
+ **************************************************************************/
+
+#define EEPROM_NODE_ADDR_0 0x0 /* Word */
+#define EEPROM_NODE_ADDR_1 0x1 /* Word */
+#define EEPROM_NODE_ADDR_2 0x2 /* Word */
+#define EEPROM_PROD_ID 0x3 /* 0x9[0-f]50 */
+#define EEPROM_MFG_ID 0x7 /* 0x6d50 */
+#define EEPROM_ADDR_CFG 0x8 /* Base addr */
+#define EEPROM_RESOURCE_CFG 0x9 /* IRQ. Bits 12-15 */
+#define EEPROM_OEM_ADDR_0 0xa /* Word */
+#define EEPROM_OEM_ADDR_1 0xb /* Word */
+#define EEPROM_OEM_ADDR_2 0xc /* Word */
+#define EEPROM_SOFT_INFO_2 0xf /* Software information 2 */
+
+#define NO_RX_OVN_ANOMALY (1<<5)
+
+/**************************************************************************
+ * *
+ * These are the registers for the 3Com 3c509 and their bit patterns when *
+ * applicable. They have been taken out the the "EtherLink III Parallel *
+ * Tasking EISA and ISA Technical Reference" "Beta Draft 10/30/92" manual *
+ * from 3com. *
+ * *
+ **************************************************************************/
+
+#define VX_COMMAND 0x0e /* Write. BASE+0x0e is always a
+ * command reg. */
+#define VX_STATUS 0x0e /* Read. BASE+0x0e is always status
+ * reg. */
+#define VX_WINDOW 0x0f /* Read. BASE+0x0f is always window
+ * reg. */
+/*
+ * Window 0 registers. Setup.
+ */
+/* Write */
+#define VX_W0_EEPROM_DATA 0x0c
+#define VX_W0_EEPROM_COMMAND 0x0a
+#define VX_W0_RESOURCE_CFG 0x08
+#define VX_W0_ADDRESS_CFG 0x06
+#define VX_W0_CONFIG_CTRL 0x04
+ /* Read */
+#define VX_W0_PRODUCT_ID 0x02
+#define VX_W0_MFG_ID 0x00
+
+
+/*
+ * Window 1 registers. Operating Set.
+ */
+/* Write */
+#define VX_W1_TX_PIO_WR_2 0x02
+#define VX_W1_TX_PIO_WR_1 0x00
+/* Read */
+#define VX_W1_FREE_TX 0x0c
+#define VX_W1_TX_STATUS 0x0b /* byte */
+#define VX_W1_TIMER 0x0a /* byte */
+#define VX_W1_RX_STATUS 0x08
+#define VX_W1_RX_PIO_RD_2 0x02
+#define VX_W1_RX_PIO_RD_1 0x00
+
+/*
+ * Window 2 registers. Station Address Setup/Read
+ */
+/* Read/Write */
+#define VX_W2_ADDR_5 0x05
+#define VX_W2_ADDR_4 0x04
+#define VX_W2_ADDR_3 0x03
+#define VX_W2_ADDR_2 0x02
+#define VX_W2_ADDR_1 0x01
+#define VX_W2_ADDR_0 0x00
+
+/*
+ * Window 3 registers. FIFO Management.
+ */
+/* Read */
+#define VX_W3_INTERNAL_CFG 0x00
+#define VX_W3_RESET_OPT 0x08
+#define VX_W3_FREE_TX 0x0c
+#define VX_W3_FREE_RX 0x0a
+
+/*
+ * Window 4 registers. Diagnostics.
+ */
+/* Read/Write */
+#define VX_W4_MEDIA_TYPE 0x0a
+#define VX_W4_CTRLR_STATUS 0x08
+#define VX_W4_NET_DIAG 0x06
+#define VX_W4_FIFO_DIAG 0x04
+#define VX_W4_HOST_DIAG 0x02
+#define VX_W4_TX_DIAG 0x00
+
+/*
+ * Window 5 Registers. Results and Internal status.
+ */
+/* Read */
+#define VX_W5_READ_0_MASK 0x0c
+#define VX_W5_INTR_MASK 0x0a
+#define VX_W5_RX_FILTER 0x08
+#define VX_W5_RX_EARLY_THRESH 0x06
+#define VX_W5_TX_AVAIL_THRESH 0x02
+#define VX_W5_TX_START_THRESH 0x00
+
+/*
+ * Window 6 registers. Statistics.
+ */
+/* Read/Write */
+#define TX_TOTAL_OK 0x0c
+#define RX_TOTAL_OK 0x0a
+#define TX_DEFERRALS 0x08
+#define RX_FRAMES_OK 0x07
+#define TX_FRAMES_OK 0x06
+#define RX_OVERRUNS 0x05
+#define TX_COLLISIONS 0x04
+#define TX_AFTER_1_COLLISION 0x03
+#define TX_AFTER_X_COLLISIONS 0x02
+#define TX_NO_SQE 0x01
+#define TX_CD_LOST 0x00
+
+/****************************************
+ *
+ * Register definitions.
+ *
+ ****************************************/
+
+/*
+ * Command register. All windows.
+ *
+ * 16 bit register.
+ * 15-11: 5-bit code for command to be executed.
+ * 10-0: 11-bit arg if any. For commands with no args;
+ * this can be set to anything.
+ */
+#define GLOBAL_RESET (unsigned short) 0x0000 /* Wait at least 1ms
+ * after issuing */
+#define WINDOW_SELECT (unsigned short) (0x1<<11)
+#define START_TRANSCEIVER (unsigned short) (0x2<<11) /* Read ADDR_CFG reg to
+ * determine whether
+ * this is needed. If
+ * so; wait 800 uSec
+ * before using trans-
+ * ceiver. */
+#define RX_DISABLE (unsigned short) (0x3<<11) /* state disabled on
+ * power-up */
+#define RX_ENABLE (unsigned short) (0x4<<11)
+#define RX_RESET (unsigned short) (0x5<<11)
+#define RX_DISCARD_TOP_PACK (unsigned short) (0x8<<11)
+#define TX_ENABLE (unsigned short) (0x9<<11)
+#define TX_DISABLE (unsigned short) (0xa<<11)
+#define TX_RESET (unsigned short) (0xb<<11)
+#define REQ_INTR (unsigned short) (0xc<<11)
+/*
+ * The following C_* acknowledge the various interrupts. Some of them don't
+ * do anything. See the manual.
+ */
+#define ACK_INTR (unsigned short) (0x6800)
+# define C_INTR_LATCH (unsigned short) (ACK_INTR|0x1)
+# define C_CARD_FAILURE (unsigned short) (ACK_INTR|0x2)
+# define C_TX_COMPLETE (unsigned short) (ACK_INTR|0x4)
+# define C_TX_AVAIL (unsigned short) (ACK_INTR|0x8)
+# define C_RX_COMPLETE (unsigned short) (ACK_INTR|0x10)
+# define C_RX_EARLY (unsigned short) (ACK_INTR|0x20)
+# define C_INT_RQD (unsigned short) (ACK_INTR|0x40)
+# define C_UPD_STATS (unsigned short) (ACK_INTR|0x80)
+#define SET_INTR_MASK (unsigned short) (0xe<<11)
+#define SET_RD_0_MASK (unsigned short) (0xf<<11)
+#define SET_RX_FILTER (unsigned short) (0x10<<11)
+# define FIL_INDIVIDUAL (unsigned short) (0x1)
+# define FIL_MULTICAST (unsigned short) (0x02)
+# define FIL_BRDCST (unsigned short) (0x04)
+# define FIL_PROMISC (unsigned short) (0x08)
+#define SET_RX_EARLY_THRESH (unsigned short) (0x11<<11)
+#define SET_TX_AVAIL_THRESH (unsigned short) (0x12<<11)
+#define SET_TX_START_THRESH (unsigned short) (0x13<<11)
+#define STATS_ENABLE (unsigned short) (0x15<<11)
+#define STATS_DISABLE (unsigned short) (0x16<<11)
+#define STOP_TRANSCEIVER (unsigned short) (0x17<<11)
+
+/*
+ * Status register. All windows.
+ *
+ * 15-13: Window number(0-7).
+ * 12: Command_in_progress.
+ * 11: reserved.
+ * 10: reserved.
+ * 9: reserved.
+ * 8: reserved.
+ * 7: Update Statistics.
+ * 6: Interrupt Requested.
+ * 5: RX Early.
+ * 4: RX Complete.
+ * 3: TX Available.
+ * 2: TX Complete.
+ * 1: Adapter Failure.
+ * 0: Interrupt Latch.
+ */
+#define S_INTR_LATCH (unsigned short) (0x1)
+#define S_CARD_FAILURE (unsigned short) (0x2)
+#define S_TX_COMPLETE (unsigned short) (0x4)
+#define S_TX_AVAIL (unsigned short) (0x8)
+#define S_RX_COMPLETE (unsigned short) (0x10)
+#define S_RX_EARLY (unsigned short) (0x20)
+#define S_INT_RQD (unsigned short) (0x40)
+#define S_UPD_STATS (unsigned short) (0x80)
+#define S_COMMAND_IN_PROGRESS (unsigned short) (0x1000)
+
+#define VX_BUSY_WAIT while (inw(BASE + VX_STATUS) & S_COMMAND_IN_PROGRESS)
+
+/* Address Config. Register.
+ * Window 0/Port 06
+ */
+
+#define ACF_CONNECTOR_BITS 14
+#define ACF_CONNECTOR_UTP 0
+#define ACF_CONNECTOR_AUI 1
+#define ACF_CONNECTOR_BNC 3
+
+#define INTERNAL_CONNECTOR_BITS 20
+#define INTERNAL_CONNECTOR_MASK 0x01700000
+
+/*
+ * FIFO Registers. RX Status.
+ *
+ * 15: Incomplete or FIFO empty.
+ * 14: 1: Error in RX Packet 0: Incomplete or no error.
+ * 13-11: Type of error.
+ * 1000 = Overrun.
+ * 1011 = Run Packet Error.
+ * 1100 = Alignment Error.
+ * 1101 = CRC Error.
+ * 1001 = Oversize Packet Error (>1514 bytes)
+ * 0010 = Dribble Bits.
+ * (all other error codes, no errors.)
+ *
+ * 10-0: RX Bytes (0-1514)
+ */
+#define ERR_INCOMPLETE (unsigned short) (0x8000)
+#define ERR_RX (unsigned short) (0x4000)
+#define ERR_MASK (unsigned short) (0x7800)
+#define ERR_OVERRUN (unsigned short) (0x4000)
+#define ERR_RUNT (unsigned short) (0x5800)
+#define ERR_ALIGNMENT (unsigned short) (0x6000)
+#define ERR_CRC (unsigned short) (0x6800)
+#define ERR_OVERSIZE (unsigned short) (0x4800)
+#define ERR_DRIBBLE (unsigned short) (0x1000)
+
+/*
+ * TX Status.
+ *
+ * Reports the transmit status of a completed transmission. Writing this
+ * register pops the transmit completion stack.
+ *
+ * Window 1/Port 0x0b.
+ *
+ * 7: Complete
+ * 6: Interrupt on successful transmission requested.
+ * 5: Jabber Error (TP Only, TX Reset required. )
+ * 4: Underrun (TX Reset required. )
+ * 3: Maximum Collisions.
+ * 2: TX Status Overflow.
+ * 1-0: Undefined.
+ *
+ */
+#define TXS_COMPLETE 0x80
+#define TXS_INTR_REQ 0x40
+#define TXS_JABBER 0x20
+#define TXS_UNDERRUN 0x10
+#define TXS_MAX_COLLISION 0x8
+#define TXS_STATUS_OVERFLOW 0x4
+
+#define RS_AUI (1<<5)
+#define RS_BNC (1<<4)
+#define RS_UTP (1<<3)
+#define RS_T4 (1<<0)
+#define RS_TX (1<<1)
+#define RS_FX (1<<2)
+#define RS_MII (1<<6)
+
+
+/*
+ * FIFO Status (Window 4)
+ *
+ * Supports FIFO diagnostics
+ *
+ * Window 4/Port 0x04.1
+ *
+ * 15: 1=RX receiving (RO). Set when a packet is being received
+ * into the RX FIFO.
+ * 14: Reserved
+ * 13: 1=RX underrun (RO). Generates Adapter Failure interrupt.
+ * Requires RX Reset or Global Reset command to recover.
+ * It is generated when you read past the end of a packet -
+ * reading past what has been received so far will give bad
+ * data.
+ * 12: 1=RX status overrun (RO). Set when there are already 8
+ * packets in the RX FIFO. While this bit is set, no additional
+ * packets are received. Requires no action on the part of
+ * the host. The condition is cleared once a packet has been
+ * read out of the RX FIFO.
+ * 11: 1=RX overrun (RO). Set when the RX FIFO is full (there
+ * may not be an overrun packet yet). While this bit is set,
+ * no additional packets will be received (some additional
+ * bytes can still be pending between the wire and the RX
+ * FIFO). Requires no action on the part of the host. The
+ * condition is cleared once a few bytes have been read out
+ * from the RX FIFO.
+ * 10: 1=TX overrun (RO). Generates adapter failure interrupt.
+ * Requires TX Reset or Global Reset command to recover.
+ * Disables Transmitter.
+ * 9-8: Unassigned.
+ * 7-0: Built in self test bits for the RX and TX FIFO's.
+ */
+#define FIFOS_RX_RECEIVING (unsigned short) 0x8000
+#define FIFOS_RX_UNDERRUN (unsigned short) 0x2000
+#define FIFOS_RX_STATUS_OVERRUN (unsigned short) 0x1000
+#define FIFOS_RX_OVERRUN (unsigned short) 0x0800
+#define FIFOS_TX_OVERRUN (unsigned short) 0x0400
+
+/*
+ * Misc defines for various things.
+ */
+#define TAG_ADAPTER 0xd0
+#define ACTIVATE_ADAPTER_TO_CONFIG 0xff
+#define ENABLE_DRQ_IRQ 0x0001
+#define MFG_ID 0x506d /* `TCM' */
+#define PROD_ID 0x5090
+#define GO_WINDOW(x) outw(WINDOW_SELECT|(x),BASE+VX_COMMAND)
+#define JABBER_GUARD_ENABLE 0x40
+#define LINKBEAT_ENABLE 0x80
+#define ENABLE_UTP (JABBER_GUARD_ENABLE | LINKBEAT_ENABLE)
+#define DISABLE_UTP 0x0
+#define RX_BYTES_MASK (unsigned short) (0x07ff)
+#define RX_ERROR 0x4000
+#define RX_INCOMPLETE 0x8000
+#define TX_INDICATE 1<<15
+#define is_eeprom_busy(b) (inw((b)+VX_W0_EEPROM_COMMAND)&EEPROM_BUSY)
+
+#define VX_IOSIZE 0x20
+
+#define VX_CONNECTORS 8
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/net/5701rls.c b/drivers/net/5701rls.c
new file mode 100644
index 0000000..86950d0
--- /dev/null
+++ b/drivers/net/5701rls.c
@@ -0,0 +1,46 @@
+/******************************************************************************/
+/* */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */
+/* Corporation. */
+/* All rights reserved. */
+/* */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation, located in the file LICENSE. */
+/* */
+/* History: */
+/* */
+/******************************************************************************/
+
+#if INCLUDE_5701_AX_FIX
+
+#include "bcm570x_mm.h"
+#include "5701rls.h"
+
+LM_STATUS LM_LoadRlsFirmware(PLM_DEVICE_BLOCK pDevice)
+{
+ T3_FWIMG_INFO FwImgInfo;
+
+ FwImgInfo.StartAddress = t3FwStartAddr;
+ FwImgInfo.Text.Buffer = (PLM_UINT8)t3FwText;
+ FwImgInfo.Text.Offset = t3FwTextAddr;
+ FwImgInfo.Text.Length = t3FwTextLen;
+ FwImgInfo.ROnlyData.Buffer = (PLM_UINT8)t3FwRodata;
+ FwImgInfo.ROnlyData.Offset = t3FwRodataAddr;
+ FwImgInfo.ROnlyData.Length = t3FwRodataLen;
+ FwImgInfo.Data.Buffer = (PLM_UINT8)t3FwData;
+ FwImgInfo.Data.Offset = t3FwDataAddr;
+ FwImgInfo.Data.Length = t3FwDataLen;
+
+ if (LM_LoadFirmware(pDevice,
+ &FwImgInfo,
+ T3_RX_CPU_ID | T3_TX_CPU_ID,
+ T3_RX_CPU_ID) != LM_STATUS_SUCCESS)
+ {
+ return LM_STATUS_FAILURE;
+ }
+
+ return LM_STATUS_SUCCESS;
+}
+
+#endif /* INCLUDE_5701_AX_FIX */
diff --git a/drivers/net/5701rls.h b/drivers/net/5701rls.h
new file mode 100644
index 0000000..30b127a
--- /dev/null
+++ b/drivers/net/5701rls.h
@@ -0,0 +1,198 @@
+/******************************************************************************/
+/* */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */
+/* Corporation. */
+/* All rights reserved. */
+/* */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation, located in the file LICENSE. */
+/* */
+/* History: */
+/******************************************************************************/
+
+typedef unsigned long U32;
+int t3FwReleaseMajor = 0x0;
+int t3FwReleaseMinor = 0x0;
+int t3FwReleaseFix = 0x0;
+U32 t3FwStartAddr = 0x08000000;
+U32 t3FwTextAddr = 0x08000000;
+int t3FwTextLen = 0x9c0;
+U32 t3FwRodataAddr = 0x080009c0;
+int t3FwRodataLen = 0x60;
+U32 t3FwDataAddr = 0x08000a40;
+int t3FwDataLen = 0x20;
+U32 t3FwSbssAddr = 0x08000a60;
+int t3FwSbssLen = 0xc;
+U32 t3FwBssAddr = 0x08000a70;
+int t3FwBssLen = 0x10;
+U32 t3FwText[(0x9c0/4) + 1] = {
+0x0,
+0x10000003, 0x0, 0xd, 0xd,
+0x3c1d0800, 0x37bd3ffc, 0x3a0f021, 0x3c100800,
+0x26100000, 0xe000018, 0x0, 0xd,
+0x3c1d0800, 0x37bd3ffc, 0x3a0f021, 0x3c100800,
+0x26100034, 0xe00021c, 0x0, 0xd,
+0x0, 0x0, 0x0, 0x27bdffe0,
+0x3c1cc000, 0xafbf0018, 0xaf80680c, 0xe00004c,
+0x241b2105, 0x97850000, 0x97870002, 0x9782002c,
+0x9783002e, 0x3c040800, 0x248409c0, 0xafa00014,
+0x21400, 0x621825, 0x52c00, 0xafa30010,
+0x8f860010, 0xe52825, 0xe000060, 0x24070102,
+0x3c02ac00, 0x34420100, 0x3c03ac01, 0x34630100,
+0xaf820490, 0x3c02ffff, 0xaf820494, 0xaf830498,
+0xaf82049c, 0x24020001, 0xaf825ce0, 0xe00003f,
+0xaf825d00, 0xe000140, 0x0, 0x8fbf0018,
+0x3e00008, 0x27bd0020, 0x2402ffff, 0xaf825404,
+0x8f835400, 0x34630400, 0xaf835400, 0xaf825404,
+0x3c020800, 0x24420034, 0xaf82541c, 0x3e00008,
+0xaf805400, 0x0, 0x0, 0x3c020800,
+0x34423000, 0x3c030800, 0x34633000, 0x3c040800,
+0x348437ff, 0x3c010800, 0xac220a64, 0x24020040,
+0x3c010800, 0xac220a68, 0x3c010800, 0xac200a60,
+0xac600000, 0x24630004, 0x83102b, 0x5040fffd,
+0xac600000, 0x3e00008, 0x0, 0x804821,
+0x8faa0010, 0x3c020800, 0x8c420a60, 0x3c040800,
+0x8c840a68, 0x8fab0014, 0x24430001, 0x44102b,
+0x3c010800, 0xac230a60, 0x14400003, 0x4021,
+0x3c010800, 0xac200a60, 0x3c020800, 0x8c420a60,
+0x3c030800, 0x8c630a64, 0x91240000, 0x21140,
+0x431021, 0x481021, 0x25080001, 0xa0440000,
+0x29020008, 0x1440fff4, 0x25290001, 0x3c020800,
+0x8c420a60, 0x3c030800, 0x8c630a64, 0x8f84680c,
+0x21140, 0x431021, 0xac440008, 0xac45000c,
+0xac460010, 0xac470014, 0xac4a0018, 0x3e00008,
+0xac4b001c, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x2000008,
+0x0, 0xa0001e3, 0x3c0a0001, 0xa0001e3,
+0x3c0a0002, 0xa0001e3, 0x0, 0xa0001e3,
+0x0, 0xa0001e3, 0x0, 0xa0001e3,
+0x0, 0xa0001e3, 0x0, 0xa0001e3,
+0x0, 0xa0001e3, 0x0, 0xa0001e3,
+0x0, 0xa0001e3, 0x0, 0xa0001e3,
+0x3c0a0007, 0xa0001e3, 0x3c0a0008, 0xa0001e3,
+0x3c0a0009, 0xa0001e3, 0x0, 0xa0001e3,
+0x0, 0xa0001e3, 0x3c0a000b, 0xa0001e3,
+0x3c0a000c, 0xa0001e3, 0x3c0a000d, 0xa0001e3,
+0x0, 0xa0001e3, 0x0, 0xa0001e3,
+0x3c0a000e, 0xa0001e3, 0x0, 0xa0001e3,
+0x0, 0xa0001e3, 0x0, 0xa0001e3,
+0x0, 0xa0001e3, 0x0, 0xa0001e3,
+0x0, 0xa0001e3, 0x0, 0xa0001e3,
+0x0, 0xa0001e3, 0x3c0a0013, 0xa0001e3,
+0x3c0a0014, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x27bdffe0,
+0x1821, 0x1021, 0xafbf0018, 0xafb10014,
+0xafb00010, 0x3c010800, 0x220821, 0xac200a70,
+0x3c010800, 0x220821, 0xac200a74, 0x3c010800,
+0x220821, 0xac200a78, 0x24630001, 0x1860fff5,
+0x2442000c, 0x24110001, 0x8f906810, 0x32020004,
+0x14400005, 0x24040001, 0x3c020800, 0x8c420a78,
+0x18400003, 0x2021, 0xe000182, 0x0,
+0x32020001, 0x10400003, 0x0, 0xe000169,
+0x0, 0xa000153, 0xaf915028, 0x8fbf0018,
+0x8fb10014, 0x8fb00010, 0x3e00008, 0x27bd0020,
+0x3c050800, 0x8ca50a70, 0x3c060800, 0x8cc60a80,
+0x3c070800, 0x8ce70a78, 0x27bdffe0, 0x3c040800,
+0x248409d0, 0xafbf0018, 0xafa00010, 0xe000060,
+0xafa00014, 0xe00017b, 0x2021, 0x8fbf0018,
+0x3e00008, 0x27bd0020, 0x24020001, 0x8f836810,
+0x821004, 0x21027, 0x621824, 0x3e00008,
+0xaf836810, 0x27bdffd8, 0xafbf0024, 0x1080002e,
+0xafb00020, 0x8f825cec, 0xafa20018, 0x8f825cec,
+0x3c100800, 0x26100a78, 0xafa2001c, 0x34028000,
+0xaf825cec, 0x8e020000, 0x18400016, 0x0,
+0x3c020800, 0x94420a74, 0x8fa3001c, 0x221c0,
+0xac830004, 0x8fa2001c, 0x3c010800, 0xe000201,
+0xac220a74, 0x10400005, 0x0, 0x8e020000,
+0x24420001, 0xa0001df, 0xae020000, 0x3c020800,
+0x8c420a70, 0x21c02, 0x321c0, 0xa0001c5,
+0xafa2001c, 0xe000201, 0x0, 0x1040001f,
+0x0, 0x8e020000, 0x8fa3001c, 0x24420001,
+0x3c010800, 0xac230a70, 0x3c010800, 0xac230a74,
+0xa0001df, 0xae020000, 0x3c100800, 0x26100a78,
+0x8e020000, 0x18400028, 0x0, 0xe000201,
+0x0, 0x14400024, 0x0, 0x8e020000,
+0x3c030800, 0x8c630a70, 0x2442ffff, 0xafa3001c,
+0x18400006, 0xae020000, 0x31402, 0x221c0,
+0x8c820004, 0x3c010800, 0xac220a70, 0x97a2001e,
+0x2442ff00, 0x2c420300, 0x1440000b, 0x24024000,
+0x3c040800, 0x248409dc, 0xafa00010, 0xafa00014,
+0x8fa6001c, 0x24050008, 0xe000060, 0x3821,
+0xa0001df, 0x0, 0xaf825cf8, 0x3c020800,
+0x8c420a40, 0x8fa3001c, 0x24420001, 0xaf835cf8,
+0x3c010800, 0xac220a40, 0x8fbf0024, 0x8fb00020,
+0x3e00008, 0x27bd0028, 0x27bdffe0, 0x3c040800,
+0x248409e8, 0x2821, 0x3021, 0x3821,
+0xafbf0018, 0xafa00010, 0xe000060, 0xafa00014,
+0x8fbf0018, 0x3e00008, 0x27bd0020, 0x8f82680c,
+0x8f85680c, 0x21827, 0x3182b, 0x31823,
+0x431024, 0x441021, 0xa2282b, 0x10a00006,
+0x0, 0x401821, 0x8f82680c, 0x43102b,
+0x1440fffd, 0x0, 0x3e00008, 0x0,
+0x3c040800, 0x8c840000, 0x3c030800, 0x8c630a40,
+0x64102b, 0x54400002, 0x831023, 0x641023,
+0x2c420008, 0x3e00008, 0x38420001, 0x27bdffe0,
+0x802821, 0x3c040800, 0x24840a00, 0x3021,
+0x3821, 0xafbf0018, 0xafa00010, 0xe000060,
+0xafa00014, 0xa000216, 0x0, 0x8fbf0018,
+0x3e00008, 0x27bd0020, 0x0, 0x27bdffe0,
+0x3c1cc000, 0xafbf0018, 0xe00004c, 0xaf80680c,
+0x3c040800, 0x24840a10, 0x3802821, 0x3021,
+0x3821, 0xafa00010, 0xe000060, 0xafa00014,
+0x2402ffff, 0xaf825404, 0x3c0200aa, 0xe000234,
+0xaf825434, 0x8fbf0018, 0x3e00008, 0x27bd0020,
+0x0, 0x0, 0x0, 0x27bdffe8,
+0xafb00010, 0x24100001, 0xafbf0014, 0x3c01c003,
+0xac200000, 0x8f826810, 0x30422000, 0x10400003,
+0x0, 0xe000246, 0x0, 0xa00023a,
+0xaf905428, 0x8fbf0014, 0x8fb00010, 0x3e00008,
+0x27bd0018, 0x27bdfff8, 0x8f845d0c, 0x3c0200ff,
+0x3c030800, 0x8c630a50, 0x3442fff8, 0x821024,
+0x1043001e, 0x3c0500ff, 0x34a5fff8, 0x3c06c003,
+0x3c074000, 0x851824, 0x8c620010, 0x3c010800,
+0xac230a50, 0x30420008, 0x10400005, 0x871025,
+0x8cc20000, 0x24420001, 0xacc20000, 0x871025,
+0xaf825d0c, 0x8fa20000, 0x24420001, 0xafa20000,
+0x8fa20000, 0x8fa20000, 0x24420001, 0xafa20000,
+0x8fa20000, 0x8f845d0c, 0x3c030800, 0x8c630a50,
+0x851024, 0x1443ffe8, 0x851824, 0x27bd0008,
+0x3e00008, 0x0, 0x0, 0x0 };
+U32 t3FwRodata[(0x60/4) + 1] = {
+0x35373031, 0x726c7341, 0x0,
+0x0, 0x53774576, 0x656e7430, 0x0,
+0x726c7045, 0x76656e74, 0x31000000, 0x556e6b6e,
+0x45766e74, 0x0, 0x0, 0x0,
+0x0, 0x66617461, 0x6c457272, 0x0,
+0x0, 0x4d61696e, 0x43707542, 0x0,
+0x0, 0x0 };
+U32 t3FwData[(0x20/4) + 1] = {
+0x0, 0x0, 0x0,
+0x0, 0x0, 0x0, 0x0,
+0x0, 0x0 };
diff --git a/drivers/net/8390.h b/drivers/net/8390.h
new file mode 100644
index 0000000..f087217
--- /dev/null
+++ b/drivers/net/8390.h
@@ -0,0 +1,124 @@
+/*
+
+Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
+
+Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
+eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
+are GPL, so this is, of course, GPL.
+
+*/
+
+/* Generic NS8390 register definitions. */
+/* This file is part of Donald Becker's 8390 drivers, and is distributed
+ under the same license. Auto-loading of 8390.o only in v2.2 - Paul G.
+ Some of these names and comments originated from the Crynwr
+ packet drivers, which are distributed under the GPL. */
+
+#ifndef _8390_h
+#define _8390_h
+
+/* Some generic ethernet register configurations. */
+#define E8390_TX_IRQ_MASK 0xa /* For register EN0_ISR */
+#define E8390_RX_IRQ_MASK 0x5
+#define E8390_RXCONFIG 0x4 /* EN0_RXCR: broadcasts, no multicast,errors */
+#define E8390_RXOFF 0x20 /* EN0_RXCR: Accept no packets */
+#define E8390_TXCONFIG 0x00 /* EN0_TXCR: Normal transmit mode */
+#define E8390_TXOFF 0x02 /* EN0_TXCR: Transmitter off */
+
+/* Register accessed at EN_CMD, the 8390 base addr. */
+#define E8390_STOP 0x01 /* Stop and reset the chip */
+#define E8390_START 0x02 /* Start the chip, clear reset */
+#define E8390_TRANS 0x04 /* Transmit a frame */
+#define E8390_RREAD 0x08 /* Remote read */
+#define E8390_RWRITE 0x10 /* Remote write */
+#define E8390_NODMA 0x20 /* Remote DMA */
+#define E8390_PAGE0 0x00 /* Select page chip registers */
+#define E8390_PAGE1 0x40 /* using the two high-order bits */
+#define E8390_PAGE2 0x80 /* Page 3 is invalid. */
+
+/*
+ * Only generate indirect loads given a machine that needs them.
+ * - removed AMIGA_PCMCIA from this list, handled as ISA io now
+ */
+
+#define n2k_inb(port) (*((volatile unsigned char *)(port+CONFIG_DRIVER_NE2000_BASE)))
+#define n2k_outb(val,port) (*((volatile unsigned char *)(port+CONFIG_DRIVER_NE2000_BASE)) = val)
+
+#define EI_SHIFT(x) (x)
+
+#define E8390_CMD EI_SHIFT(0x00) /* The command register (for all pages) */
+/* Page 0 register offsets. */
+#define EN0_CLDALO EI_SHIFT(0x01) /* Low byte of current local dma addr RD */
+#define EN0_STARTPG EI_SHIFT(0x01) /* Starting page of ring bfr WR */
+#define EN0_CLDAHI EI_SHIFT(0x02) /* High byte of current local dma addr RD */
+#define EN0_STOPPG EI_SHIFT(0x02) /* Ending page +1 of ring bfr WR */
+#define EN0_BOUNDARY EI_SHIFT(0x03) /* Boundary page of ring bfr RD WR */
+#define EN0_TSR EI_SHIFT(0x04) /* Transmit status reg RD */
+#define EN0_TPSR EI_SHIFT(0x04) /* Transmit starting page WR */
+#define EN0_NCR EI_SHIFT(0x05) /* Number of collision reg RD */
+#define EN0_TCNTLO EI_SHIFT(0x05) /* Low byte of tx byte count WR */
+#define EN0_FIFO EI_SHIFT(0x06) /* FIFO RD */
+#define EN0_TCNTHI EI_SHIFT(0x06) /* High byte of tx byte count WR */
+#define EN0_ISR EI_SHIFT(0x07) /* Interrupt status reg RD WR */
+#define EN0_CRDALO EI_SHIFT(0x08) /* low byte of current remote dma address RD */
+#define EN0_RSARLO EI_SHIFT(0x08) /* Remote start address reg 0 */
+#define EN0_CRDAHI EI_SHIFT(0x09) /* high byte, current remote dma address RD */
+#define EN0_RSARHI EI_SHIFT(0x09) /* Remote start address reg 1 */
+#define EN0_RCNTLO EI_SHIFT(0x0a) /* Remote byte count reg WR */
+#define EN0_RCNTHI EI_SHIFT(0x0b) /* Remote byte count reg WR */
+#define EN0_RSR EI_SHIFT(0x0c) /* rx status reg RD */
+#define EN0_RXCR EI_SHIFT(0x0c) /* RX configuration reg WR */
+#define EN0_TXCR EI_SHIFT(0x0d) /* TX configuration reg WR */
+#define EN0_COUNTER0 EI_SHIFT(0x0d) /* Rcv alignment error counter RD */
+#define EN0_DCFG EI_SHIFT(0x0e) /* Data configuration reg WR */
+#define EN0_COUNTER1 EI_SHIFT(0x0e) /* Rcv CRC error counter RD */
+#define EN0_IMR EI_SHIFT(0x0f) /* Interrupt mask reg WR */
+#define EN0_COUNTER2 EI_SHIFT(0x0f) /* Rcv missed frame error counter RD */
+
+/* Bits in EN0_ISR - Interrupt status register */
+#define ENISR_RX 0x01 /* Receiver, no error */
+#define ENISR_TX 0x02 /* Transmitter, no error */
+#define ENISR_RX_ERR 0x04 /* Receiver, with error */
+#define ENISR_TX_ERR 0x08 /* Transmitter, with error */
+#define ENISR_OVER 0x10 /* Receiver overwrote the ring */
+#define ENISR_COUNTERS 0x20 /* Counters need emptying */
+#define ENISR_RDC 0x40 /* remote dma complete */
+#define ENISR_RESET 0x80 /* Reset completed */
+#define ENISR_ALL 0x3f /* Interrupts we will enable */
+
+/* Bits in EN0_DCFG - Data config register */
+#define ENDCFG_WTS 0x01 /* word transfer mode selection */
+#define ENDCFG_BOS 0x02 /* byte order selection */
+#define ENDCFG_AUTO_INIT 0x10 /* Auto-init to remove packets from ring */
+#define ENDCFG_FIFO 0x40 /* 8 bytes */
+
+/* Page 1 register offsets. */
+#define EN1_PHYS EI_SHIFT(0x01) /* This board's physical enet addr RD WR */
+#define EN1_PHYS_SHIFT(i) EI_SHIFT(i+1) /* Get and set mac address */
+#define EN1_CURPAG EI_SHIFT(0x07) /* Current memory page RD WR */
+#define EN1_MULT EI_SHIFT(0x08) /* Multicast filter mask array (8 bytes) RD WR */
+#define EN1_MULT_SHIFT(i) EI_SHIFT(8+i) /* Get and set multicast filter */
+
+/* Bits in received packet status byte and EN0_RSR*/
+#define ENRSR_RXOK 0x01 /* Received a good packet */
+#define ENRSR_CRC 0x02 /* CRC error */
+#define ENRSR_FAE 0x04 /* frame alignment error */
+#define ENRSR_FO 0x08 /* FIFO overrun */
+#define ENRSR_MPA 0x10 /* missed pkt */
+#define ENRSR_PHY 0x20 /* physical/multicast address */
+#define ENRSR_DIS 0x40 /* receiver disable. set in monitor mode */
+#define ENRSR_DEF 0x80 /* deferring */
+
+/* Transmitted packet status, EN0_TSR. */
+#define ENTSR_PTX 0x01 /* Packet transmitted without error */
+#define ENTSR_ND 0x02 /* The transmit wasn't deferred. */
+#define ENTSR_COL 0x04 /* The transmit collided at least once. */
+#define ENTSR_ABT 0x08 /* The transmit collided 16 times, and was deferred. */
+#define ENTSR_CRS 0x10 /* The carrier sense was lost. */
+#define ENTSR_FU 0x20 /* A "FIFO underrun" occurred during transmit. */
+#define ENTSR_CDH 0x40 /* The collision detect "heartbeat" signal was lost. */
+#define ENTSR_OWC 0x80 /* There was an out-of-window collision. */
+
+#define NIC_RECEIVE_MONITOR_MODE 0x20
+
+#endif /* _8390_h */
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 37d69b9..41e1bde 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -25,8 +25,39 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libnet.a
-COBJS := mcffec.o
+COBJS-y += 3c589.o
+COBJS-y += bcm570x.o bcm570x_autoneg.o 5701rls.o
+COBJS-y += cs8900.o
+COBJS-y += dc2114x.o
+COBJS-y += dm9000x.o
+COBJS-y += e1000.o
+COBJS-y += eepro100.o
+COBJS-y += enc28j60.o
+COBJS-y += inca-ip_sw.o
+COBJS-y += ks8695eth.o
+COBJS-y += lan91c96.o
+COBJS-y += macb.o
+COBJS-y += mcffec.o
+COBJS-y += natsemi.o
+COBJS-y += ne2000.o
+COBJS-y += netarm_eth.o
+COBJS-y += netconsole.o
+COBJS-y += ns7520_eth.o
+COBJS-y += ns8382x.o
+COBJS-y += ns9750_eth.o
+COBJS-y += pcnet.o
+COBJS-y += plb2800_eth.o
+COBJS-y += rtl8019.o
+COBJS-y += rtl8139.o
+COBJS-y += rtl8169.o
+COBJS-y += s3c4510b_eth.o
+COBJS-y += smc91111.o
+COBJS-y += tigon3.o
+COBJS-y += tsec.o
+COBJS-y += tsi108_eth.o
+COBJS-y += uli526x.o
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/drivers/net/bcm570x.c b/drivers/net/bcm570x.c
new file mode 100644
index 0000000..c8f4064
--- /dev/null
+++ b/drivers/net/bcm570x.c
@@ -0,0 +1,1603 @@
+/*
+ * Broadcom BCM570x Ethernet Driver for U-Boot.
+ * Support 5701, 5702, 5703, and 5704. Single instance driver.
+ * Copyright (C) 2002 James F. Dougherty (jfd@broadcom.com)
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_CMD_NET) \
+ && (!defined(CONFIG_NET_MULTI)) && defined(CONFIG_BCM570x)
+
+#ifdef CONFIG_BMW
+#include <mpc824x.h>
+#endif
+#include <net.h>
+#include "bcm570x_mm.h"
+#include "bcm570x_autoneg.h"
+#include <pci.h>
+#include <malloc.h>
+
+/*
+ * PCI Registers and definitions.
+ */
+#define PCI_CMD_MASK 0xffff0000 /* mask to save status bits */
+#define PCI_ANY_ID (~0)
+
+/*
+ * PCI memory base for Ethernet device as well as device Interrupt.
+ */
+#define BCM570X_MBAR 0x80100000
+#define BCM570X_ILINE 1
+
+#define SECOND_USEC 1000000
+#define MAX_PACKET_SIZE 1600
+#define MAX_UNITS 4
+
+/* Globals to this module */
+int initialized = 0;
+unsigned int ioBase = 0;
+volatile PLM_DEVICE_BLOCK pDevice = NULL; /* 570x softc */
+volatile PUM_DEVICE_BLOCK pUmDevice = NULL;
+
+/* Used to pass the full-duplex flag, etc. */
+int line_speed[MAX_UNITS] = { 0, 0, 0, 0 };
+static int full_duplex[MAX_UNITS] = { 1, 1, 1, 1 };
+static int rx_flow_control[MAX_UNITS] = { 0, 0, 0, 0 };
+static int tx_flow_control[MAX_UNITS] = { 0, 0, 0, 0 };
+static int auto_flow_control[MAX_UNITS] = { 0, 0, 0, 0 };
+static int tx_checksum[MAX_UNITS] = { 1, 1, 1, 1 };
+static int rx_checksum[MAX_UNITS] = { 1, 1, 1, 1 };
+static int auto_speed[MAX_UNITS] = { 1, 1, 1, 1 };
+
+#if JUMBO_FRAMES
+/* Jumbo MTU for interfaces. */
+static int mtu[MAX_UNITS] = { 0, 0, 0, 0 };
+#endif
+
+/* Turn on Wake-on lan for a device unit */
+static int enable_wol[MAX_UNITS] = { 0, 0, 0, 0 };
+
+#define TX_DESC_CNT DEFAULT_TX_PACKET_DESC_COUNT
+static unsigned int tx_pkt_desc_cnt[MAX_UNITS] =
+ { TX_DESC_CNT, TX_DESC_CNT, TX_DESC_CNT, TX_DESC_CNT };
+
+#define RX_DESC_CNT DEFAULT_STD_RCV_DESC_COUNT
+static unsigned int rx_std_desc_cnt[MAX_UNITS] =
+ { RX_DESC_CNT, RX_DESC_CNT, RX_DESC_CNT, RX_DESC_CNT };
+
+static unsigned int rx_adaptive_coalesce[MAX_UNITS] = { 1, 1, 1, 1 };
+
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+#define JBO_DESC_CNT DEFAULT_JUMBO_RCV_DESC_COUNT
+static unsigned int rx_jumbo_desc_cnt[MAX_UNITS] =
+ { JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT };
+#endif
+#define RX_COAL_TK DEFAULT_RX_COALESCING_TICKS
+static unsigned int rx_coalesce_ticks[MAX_UNITS] =
+ { RX_COAL_TK, RX_COAL_TK, RX_COAL_TK, RX_COAL_TK };
+
+#define RX_COAL_FM DEFAULT_RX_MAX_COALESCED_FRAMES
+static unsigned int rx_max_coalesce_frames[MAX_UNITS] =
+ { RX_COAL_FM, RX_COAL_FM, RX_COAL_FM, RX_COAL_FM };
+
+#define TX_COAL_TK DEFAULT_TX_COALESCING_TICKS
+static unsigned int tx_coalesce_ticks[MAX_UNITS] =
+ { TX_COAL_TK, TX_COAL_TK, TX_COAL_TK, TX_COAL_TK };
+
+#define TX_COAL_FM DEFAULT_TX_MAX_COALESCED_FRAMES
+static unsigned int tx_max_coalesce_frames[MAX_UNITS] =
+ { TX_COAL_FM, TX_COAL_FM, TX_COAL_FM, TX_COAL_FM };
+
+#define ST_COAL_TK DEFAULT_STATS_COALESCING_TICKS
+static unsigned int stats_coalesce_ticks[MAX_UNITS] =
+ { ST_COAL_TK, ST_COAL_TK, ST_COAL_TK, ST_COAL_TK };
+
+/*
+ * Legitimate values for BCM570x device types
+ */
+typedef enum {
+ BCM5700VIGIL = 0,
+ BCM5700A6,
+ BCM5700T6,
+ BCM5700A9,
+ BCM5700T9,
+ BCM5700,
+ BCM5701A5,
+ BCM5701T1,
+ BCM5701T8,
+ BCM5701A7,
+ BCM5701A10,
+ BCM5701A12,
+ BCM5701,
+ BCM5702,
+ BCM5703,
+ BCM5703A31,
+ TC996T,
+ TC996ST,
+ TC996SSX,
+ TC996SX,
+ TC996BT,
+ TC997T,
+ TC997SX,
+ TC1000T,
+ TC940BR01,
+ TC942BR01,
+ NC6770,
+ NC7760,
+ NC7770,
+ NC7780
+} board_t;
+
+/* Chip-Rev names for each device-type */
+static struct {
+ char *name;
+} chip_rev[] = {
+ {
+ "BCM5700VIGIL"}, {
+ "BCM5700A6"}, {
+ "BCM5700T6"}, {
+ "BCM5700A9"}, {
+ "BCM5700T9"}, {
+ "BCM5700"}, {
+ "BCM5701A5"}, {
+ "BCM5701T1"}, {
+ "BCM5701T8"}, {
+ "BCM5701A7"}, {
+ "BCM5701A10"}, {
+ "BCM5701A12"}, {
+ "BCM5701"}, {
+ "BCM5702"}, {
+ "BCM5703"}, {
+ "BCM5703A31"}, {
+ "TC996T"}, {
+ "TC996ST"}, {
+ "TC996SSX"}, {
+ "TC996SX"}, {
+ "TC996BT"}, {
+ "TC997T"}, {
+ "TC997SX"}, {
+ "TC1000T"}, {
+ "TC940BR01"}, {
+ "TC942BR01"}, {
+ "NC6770"}, {
+ "NC7760"}, {
+ "NC7770"}, {
+ "NC7780"}, {
+ 0}
+};
+
+/* indexed by board_t, above */
+static struct {
+ char *name;
+} board_info[] = {
+ {
+ "Broadcom Vigil B5700 1000Base-T"}, {
+ "Broadcom BCM5700 1000Base-T"}, {
+ "Broadcom BCM5700 1000Base-SX"}, {
+ "Broadcom BCM5700 1000Base-SX"}, {
+ "Broadcom BCM5700 1000Base-T"}, {
+ "Broadcom BCM5700"}, {
+ "Broadcom BCM5701 1000Base-T"}, {
+ "Broadcom BCM5701 1000Base-T"}, {
+ "Broadcom BCM5701 1000Base-T"}, {
+ "Broadcom BCM5701 1000Base-SX"}, {
+ "Broadcom BCM5701 1000Base-T"}, {
+ "Broadcom BCM5701 1000Base-T"}, {
+ "Broadcom BCM5701"}, {
+ "Broadcom BCM5702 1000Base-T"}, {
+ "Broadcom BCM5703 1000Base-T"}, {
+ "Broadcom BCM5703 1000Base-SX"}, {
+ "3Com 3C996 10/100/1000 Server NIC"}, {
+ "3Com 3C996 10/100/1000 Server NIC"}, {
+ "3Com 3C996 Gigabit Fiber-SX Server NIC"}, {
+ "3Com 3C996 Gigabit Fiber-SX Server NIC"}, {
+ "3Com 3C996B Gigabit Server NIC"}, {
+ "3Com 3C997 Gigabit Server NIC"}, {
+ "3Com 3C997 Gigabit Fiber-SX Server NIC"}, {
+ "3Com 3C1000 Gigabit NIC"}, {
+ "3Com 3C940 Gigabit LOM (21X21)"}, {
+ "3Com 3C942 Gigabit LOM (31X31)"}, {
+ "Compaq NC6770 Gigabit Server Adapter"}, {
+ "Compaq NC7760 Gigabit Server Adapter"}, {
+ "Compaq NC7770 Gigabit Server Adapter"}, {
+ "Compaq NC7780 Gigabit Server Adapter"}, {
+0},};
+
+/* PCI Devices which use the 570x chipset */
+struct pci_device_table {
+ unsigned short vendor_id, device_id; /* Vendor/DeviceID */
+ unsigned short subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
+ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */
+ unsigned long board_id; /* Data private to the driver */
+ int io_size, min_latency;
+} bcm570xDevices[] = {
+ {
+ 0x14e4, 0x1644, 0x1014, 0x0277, 0, 0, BCM5700VIGIL, 128, 32}, {
+ 0x14e4, 0x1644, 0x14e4, 0x1644, 0, 0, BCM5700A6, 128, 32}, {
+ 0x14e4, 0x1644, 0x14e4, 0x2, 0, 0, BCM5700T6, 128, 32}, {
+ 0x14e4, 0x1644, 0x14e4, 0x3, 0, 0, BCM5700A9, 128, 32}, {
+ 0x14e4, 0x1644, 0x14e4, 0x4, 0, 0, BCM5700T9, 128, 32}, {
+ 0x14e4, 0x1644, 0x1028, 0xd1, 0, 0, BCM5700, 128, 32}, {
+ 0x14e4, 0x1644, 0x1028, 0x0106, 0, 0, BCM5700, 128, 32}, {
+ 0x14e4, 0x1644, 0x1028, 0x0109, 0, 0, BCM5700, 128, 32}, {
+ 0x14e4, 0x1644, 0x1028, 0x010a, 0, 0, BCM5700, 128, 32}, {
+ 0x14e4, 0x1644, 0x10b7, 0x1000, 0, 0, TC996T, 128, 32}, {
+ 0x14e4, 0x1644, 0x10b7, 0x1001, 0, 0, TC996ST, 128, 32}, {
+ 0x14e4, 0x1644, 0x10b7, 0x1002, 0, 0, TC996SSX, 128, 32}, {
+ 0x14e4, 0x1644, 0x10b7, 0x1003, 0, 0, TC997T, 128, 32}, {
+ 0x14e4, 0x1644, 0x10b7, 0x1005, 0, 0, TC997SX, 128, 32}, {
+ 0x14e4, 0x1644, 0x10b7, 0x1008, 0, 0, TC942BR01, 128, 32}, {
+ 0x14e4, 0x1644, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5700, 128, 32}, {
+ 0x14e4, 0x1645, 0x14e4, 1, 0, 0, BCM5701A5, 128, 32}, {
+ 0x14e4, 0x1645, 0x14e4, 5, 0, 0, BCM5701T1, 128, 32}, {
+ 0x14e4, 0x1645, 0x14e4, 6, 0, 0, BCM5701T8, 128, 32}, {
+ 0x14e4, 0x1645, 0x14e4, 7, 0, 0, BCM5701A7, 128, 32}, {
+ 0x14e4, 0x1645, 0x14e4, 8, 0, 0, BCM5701A10, 128, 32}, {
+ 0x14e4, 0x1645, 0x14e4, 0x8008, 0, 0, BCM5701A12, 128, 32}, {
+ 0x14e4, 0x1645, 0x0e11, 0xc1, 0, 0, NC6770, 128, 32}, {
+ 0x14e4, 0x1645, 0x0e11, 0x7c, 0, 0, NC7770, 128, 32}, {
+ 0x14e4, 0x1645, 0x0e11, 0x85, 0, 0, NC7780, 128, 32}, {
+ 0x14e4, 0x1645, 0x1028, 0x0121, 0, 0, BCM5701, 128, 32}, {
+ 0x14e4, 0x1645, 0x10b7, 0x1004, 0, 0, TC996SX, 128, 32}, {
+ 0x14e4, 0x1645, 0x10b7, 0x1006, 0, 0, TC996BT, 128, 32}, {
+ 0x14e4, 0x1645, 0x10b7, 0x1007, 0, 0, TC1000T, 128, 32}, {
+ 0x14e4, 0x1645, 0x10b7, 0x1008, 0, 0, TC940BR01, 128, 32}, {
+ 0x14e4, 0x1645, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5701, 128, 32}, {
+ 0x14e4, 0x1646, 0x14e4, 0x8009, 0, 0, BCM5702, 128, 32}, {
+ 0x14e4, 0x1646, 0x0e11, 0xbb, 0, 0, NC7760, 128, 32}, {
+ 0x14e4, 0x1646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702, 128, 32}, {
+ 0x14e4, 0x16a6, 0x14e4, 0x8009, 0, 0, BCM5702, 128, 32}, {
+ 0x14e4, 0x16a6, 0x0e11, 0xbb, 0, 0, NC7760, 128, 32}, {
+ 0x14e4, 0x16a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702, 128, 32}, {
+ 0x14e4, 0x1647, 0x14e4, 0x0009, 0, 0, BCM5703, 128, 32}, {
+ 0x14e4, 0x1647, 0x14e4, 0x000a, 0, 0, BCM5703A31, 128, 32}, {
+ 0x14e4, 0x1647, 0x14e4, 0x000b, 0, 0, BCM5703, 128, 32}, {
+ 0x14e4, 0x1647, 0x14e4, 0x800a, 0, 0, BCM5703, 128, 32}, {
+ 0x14e4, 0x1647, 0x0e11, 0x9a, 0, 0, NC7770, 128, 32}, {
+ 0x14e4, 0x1647, 0x0e11, 0x99, 0, 0, NC7780, 128, 32}, {
+ 0x14e4, 0x1647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703, 128, 32}, {
+ 0x14e4, 0x16a7, 0x14e4, 0x0009, 0, 0, BCM5703, 128, 32}, {
+ 0x14e4, 0x16a7, 0x14e4, 0x000a, 0, 0, BCM5703A31, 128, 32}, {
+ 0x14e4, 0x16a7, 0x14e4, 0x000b, 0, 0, BCM5703, 128, 32}, {
+ 0x14e4, 0x16a7, 0x14e4, 0x800a, 0, 0, BCM5703, 128, 32}, {
+ 0x14e4, 0x16a7, 0x0e11, 0x9a, 0, 0, NC7770, 128, 32}, {
+ 0x14e4, 0x16a7, 0x0e11, 0x99, 0, 0, NC7780, 128, 32}, {
+ 0x14e4, 0x16a7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703, 128, 32}
+};
+
+#define n570xDevices (sizeof(bcm570xDevices)/sizeof(bcm570xDevices[0]))
+
+/*
+ * Allocate a packet buffer from the bcm570x packet pool.
+ */
+void *bcm570xPktAlloc (int u, int pksize)
+{
+ return malloc (pksize);
+}
+
+/*
+ * Free a packet previously allocated from the bcm570x packet
+ * buffer pool.
+ */
+void bcm570xPktFree (int u, void *p)
+{
+ free (p);
+}
+
+int bcm570xReplenishRxBuffers (PUM_DEVICE_BLOCK pUmDevice)
+{
+ PLM_PACKET pPacket;
+ PUM_PACKET pUmPacket;
+ void *skb;
+ int queue_rx = 0;
+ int ret = 0;
+
+ while ((pUmPacket = (PUM_PACKET)
+ QQ_PopHead (&pUmDevice->rx_out_of_buf_q.Container)) != 0) {
+
+ pPacket = (PLM_PACKET) pUmPacket;
+
+ /* reuse an old skb */
+ if (pUmPacket->skbuff) {
+ QQ_PushTail (&pDevice->RxPacketFreeQ.Container,
+ pPacket);
+ queue_rx = 1;
+ continue;
+ }
+ if ((skb = bcm570xPktAlloc (pUmDevice->index,
+ pPacket->u.Rx.RxBufferSize + 2)) ==
+ 0) {
+ QQ_PushHead (&pUmDevice->rx_out_of_buf_q.Container,
+ pPacket);
+ printf ("NOTICE: Out of RX memory.\n");
+ ret = 1;
+ break;
+ }
+
+ pUmPacket->skbuff = skb;
+ QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
+ queue_rx = 1;
+ }
+
+ if (queue_rx) {
+ LM_QueueRxPackets (pDevice);
+ }
+
+ return ret;
+}
+
+/*
+ * Probe, Map, and Init 570x device.
+ */
+int eth_init (bd_t * bis)
+{
+ int i, rv, devFound = FALSE;
+ pci_dev_t devbusfn;
+ unsigned short status;
+
+ /* Find PCI device, if it exists, configure ... */
+ for (i = 0; i < n570xDevices; i++) {
+ devbusfn = pci_find_device (bcm570xDevices[i].vendor_id,
+ bcm570xDevices[i].device_id, 0);
+ if (devbusfn == -1) {
+ continue; /* No device of that vendor/device ID */
+ } else {
+
+ /* Set ILINE */
+ pci_write_config_byte (devbusfn,
+ PCI_INTERRUPT_LINE,
+ BCM570X_ILINE);
+
+ /*
+ * 0x10 - 0x14 define one 64-bit MBAR.
+ * 0x14 is the higher-order address bits of the BAR.
+ */
+ pci_write_config_dword (devbusfn,
+ PCI_BASE_ADDRESS_1, 0);
+
+ ioBase = BCM570X_MBAR;
+
+ pci_write_config_dword (devbusfn,
+ PCI_BASE_ADDRESS_0, ioBase);
+
+ /*
+ * Enable PCI memory, IO, and Master -- don't
+ * reset any status bits in doing so.
+ */
+ pci_read_config_word (devbusfn, PCI_COMMAND, &status);
+
+ status |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+
+ pci_write_config_word (devbusfn, PCI_COMMAND, status);
+
+ printf
+ ("\n%s: bus %d, device %d, function %d: MBAR=0x%x\n",
+ board_info[bcm570xDevices[i].board_id].name,
+ PCI_BUS (devbusfn), PCI_DEV (devbusfn),
+ PCI_FUNC (devbusfn), ioBase);
+
+ /* Allocate once, but always clear on init */
+ if (!pDevice) {
+ pDevice = malloc (sizeof (UM_DEVICE_BLOCK));
+ pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ memset (pDevice, 0x0, sizeof (UM_DEVICE_BLOCK));
+ }
+
+ /* Configure pci dev structure */
+ pUmDevice->pdev = devbusfn;
+ pUmDevice->index = 0;
+ pUmDevice->tx_pkt = 0;
+ pUmDevice->rx_pkt = 0;
+ devFound = TRUE;
+ break;
+ }
+ }
+
+ if (!devFound) {
+ printf
+ ("eth_init: FAILURE: no BCM570x Ethernet devices found.\n");
+ return -1;
+ }
+
+ /* Setup defaults for chip */
+ pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE;
+
+ if (pDevice->ChipRevId == T3_CHIP_ID_5700_B0) {
+ pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE;
+ } else {
+
+ if (rx_checksum[i]) {
+ pDevice->TaskToOffload |=
+ LM_TASK_OFFLOAD_RX_TCP_CHECKSUM |
+ LM_TASK_OFFLOAD_RX_UDP_CHECKSUM;
+ }
+
+ if (tx_checksum[i]) {
+ pDevice->TaskToOffload |=
+ LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
+ LM_TASK_OFFLOAD_TX_UDP_CHECKSUM;
+ pDevice->NoTxPseudoHdrChksum = TRUE;
+ }
+ }
+
+ /* Set Device PCI Memory base address */
+ pDevice->pMappedMemBase = (PLM_UINT8) ioBase;
+
+ /* Pull down adapter info */
+ if ((rv = LM_GetAdapterInfo (pDevice)) != LM_STATUS_SUCCESS) {
+ printf ("bcm570xEnd: LM_GetAdapterInfo failed: rv=%d!\n", rv);
+ return -2;
+ }
+
+ /* Lock not needed */
+ pUmDevice->do_global_lock = 0;
+
+ if (T3_ASIC_REV (pUmDevice->lm_dev.ChipRevId) == T3_ASIC_REV_5700) {
+ /* The 5700 chip works best without interleaved register */
+ /* accesses on certain machines. */
+ pUmDevice->do_global_lock = 1;
+ }
+
+ /* Setup timer delays */
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ pDevice->UseTaggedStatus = TRUE;
+ pUmDevice->timer_interval = CFG_HZ;
+ } else {
+ pUmDevice->timer_interval = CFG_HZ / 50;
+ }
+
+ /* Grab name .... */
+ pUmDevice->name =
+ (char *)malloc (strlen (board_info[bcm570xDevices[i].board_id].name)
+ + 1);
+ strcpy (pUmDevice->name, board_info[bcm570xDevices[i].board_id].name);
+
+ memcpy (pDevice->NodeAddress, bis->bi_enetaddr, 6);
+ LM_SetMacAddress (pDevice, bis->bi_enetaddr);
+ /* Init queues .. */
+ QQ_InitQueue (&pUmDevice->rx_out_of_buf_q.Container,
+ MAX_RX_PACKET_DESC_COUNT);
+ pUmDevice->rx_last_cnt = pUmDevice->tx_last_cnt = 0;
+
+ /* delay for 4 seconds */
+ pUmDevice->delayed_link_ind = (4 * CFG_HZ) / pUmDevice->timer_interval;
+
+ pUmDevice->adaptive_expiry = CFG_HZ / pUmDevice->timer_interval;
+
+ /* Sometimes we get spurious ints. after reset when link is down. */
+ /* This field tells the isr to service the int. even if there is */
+ /* no status block update. */
+ pUmDevice->adapter_just_inited =
+ (3 * CFG_HZ) / pUmDevice->timer_interval;
+
+ /* Initialize 570x */
+ if (LM_InitializeAdapter (pDevice) != LM_STATUS_SUCCESS) {
+ printf ("ERROR: Adapter initialization failed.\n");
+ return ERROR;
+ }
+
+ /* Enable chip ISR */
+ LM_EnableInterrupt (pDevice);
+
+ /* Clear MC table */
+ LM_MulticastClear (pDevice);
+
+ /* Enable Multicast */
+ LM_SetReceiveMask (pDevice,
+ pDevice->ReceiveMask | LM_ACCEPT_ALL_MULTICAST);
+
+ pUmDevice->opened = 1;
+ pUmDevice->tx_full = 0;
+ pUmDevice->tx_pkt = 0;
+ pUmDevice->rx_pkt = 0;
+ printf ("eth%d: %s @0x%lx,",
+ pDevice->index, pUmDevice->name, (unsigned long)ioBase);
+ printf ("node addr ");
+ for (i = 0; i < 6; i++) {
+ printf ("%2.2x", pDevice->NodeAddress[i]);
+ }
+ printf ("\n");
+
+ printf ("eth%d: ", pDevice->index);
+ printf ("%s with ", chip_rev[bcm570xDevices[i].board_id].name);
+
+ if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5400_PHY_ID)
+ printf ("Broadcom BCM5400 Copper ");
+ else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID)
+ printf ("Broadcom BCM5401 Copper ");
+ else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5411_PHY_ID)
+ printf ("Broadcom BCM5411 Copper ");
+ else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5701_PHY_ID)
+ printf ("Broadcom BCM5701 Integrated Copper ");
+ else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5703_PHY_ID)
+ printf ("Broadcom BCM5703 Integrated Copper ");
+ else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM8002_PHY_ID)
+ printf ("Broadcom BCM8002 SerDes ");
+ else if (pDevice->EnableTbi)
+ printf ("Agilent HDMP-1636 SerDes ");
+ else
+ printf ("Unknown ");
+ printf ("transceiver found\n");
+
+ printf ("eth%d: %s, MTU: %d,",
+ pDevice->index, pDevice->BusSpeedStr, 1500);
+
+ if ((pDevice->ChipRevId != T3_CHIP_ID_5700_B0) && rx_checksum[i])
+ printf ("Rx Checksum ON\n");
+ else
+ printf ("Rx Checksum OFF\n");
+ initialized++;
+
+ return 0;
+}
+
+/* Ethernet Interrupt service routine */
+void eth_isr (void)
+{
+ LM_UINT32 oldtag, newtag;
+ int i;
+
+ pUmDevice->interrupt = 1;
+
+ if (pDevice->UseTaggedStatus) {
+ if ((pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) ||
+ pUmDevice->adapter_just_inited) {
+ MB_REG_WR (pDevice, Mailbox.Interrupt[0].Low, 1);
+ oldtag = pDevice->pStatusBlkVirt->StatusTag;
+
+ for (i = 0;; i++) {
+ pDevice->pStatusBlkVirt->Status &=
+ ~STATUS_BLOCK_UPDATED;
+ LM_ServiceInterrupts (pDevice);
+ newtag = pDevice->pStatusBlkVirt->StatusTag;
+ if ((newtag == oldtag) || (i > 50)) {
+ MB_REG_WR (pDevice,
+ Mailbox.Interrupt[0].Low,
+ newtag << 24);
+ if (pDevice->UndiFix) {
+ REG_WR (pDevice, Grc.LocalCtrl,
+ pDevice->
+ GrcLocalCtrl | 0x2);
+ }
+ break;
+ }
+ oldtag = newtag;
+ }
+ }
+ } else {
+ while (pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) {
+ unsigned int dummy;
+
+ pDevice->pMemView->Mailbox.Interrupt[0].Low = 1;
+ pDevice->pStatusBlkVirt->Status &=
+ ~STATUS_BLOCK_UPDATED;
+ LM_ServiceInterrupts (pDevice);
+ pDevice->pMemView->Mailbox.Interrupt[0].Low = 0;
+ dummy = pDevice->pMemView->Mailbox.Interrupt[0].Low;
+ }
+ }
+
+ /* Allocate new RX buffers */
+ if (QQ_GetEntryCnt (&pUmDevice->rx_out_of_buf_q.Container)) {
+ bcm570xReplenishRxBuffers (pUmDevice);
+ }
+
+ /* Queue packets */
+ if (QQ_GetEntryCnt (&pDevice->RxPacketFreeQ.Container)) {
+ LM_QueueRxPackets (pDevice);
+ }
+
+ if (pUmDevice->tx_queued) {
+ pUmDevice->tx_queued = 0;
+ }
+
+ if (pUmDevice->tx_full) {
+ if (pDevice->LinkStatus != LM_STATUS_LINK_DOWN) {
+ printf
+ ("NOTICE: tx was previously blocked, restarting MUX\n");
+ pUmDevice->tx_full = 0;
+ }
+ }
+
+ pUmDevice->interrupt = 0;
+
+}
+
+int eth_send (volatile void *packet, int length)
+{
+ int status = 0;
+#if ET_DEBUG
+ unsigned char *ptr = (unsigned char *)packet;
+#endif
+ PLM_PACKET pPacket;
+ PUM_PACKET pUmPacket;
+
+ /* Link down, return */
+ while (pDevice->LinkStatus == LM_STATUS_LINK_DOWN) {
+#if 0
+ printf ("eth%d: link down - check cable or link partner.\n",
+ pUmDevice->index);
+#endif
+ eth_isr ();
+
+ /* Wait to see link for one-half a second before sending ... */
+ udelay (1500000);
+
+ }
+
+ /* Clear sent flag */
+ pUmDevice->tx_pkt = 0;
+
+ /* Previously blocked */
+ if (pUmDevice->tx_full) {
+ printf ("eth%d: tx blocked.\n", pUmDevice->index);
+ return 0;
+ }
+
+ pPacket = (PLM_PACKET)
+ QQ_PopHead (&pDevice->TxPacketFreeQ.Container);
+
+ if (pPacket == 0) {
+ pUmDevice->tx_full = 1;
+ printf ("bcm570xEndSend: TX full!\n");
+ return 0;
+ }
+
+ if (pDevice->SendBdLeft.counter == 0) {
+ pUmDevice->tx_full = 1;
+ printf ("bcm570xEndSend: no more TX descriptors!\n");
+ QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket);
+ return 0;
+ }
+
+ if (length <= 0) {
+ printf ("eth: bad packet size: %d\n", length);
+ goto out;
+ }
+
+ /* Get packet buffers and fragment list */
+ pUmPacket = (PUM_PACKET) pPacket;
+ /* Single DMA Descriptor transmit.
+ * Fragments may be provided, but one DMA descriptor max is
+ * used to send the packet.
+ */
+ if (MM_CoalesceTxBuffer (pDevice, pPacket) != LM_STATUS_SUCCESS) {
+ if (pUmPacket->skbuff == NULL) {
+ /* Packet was discarded */
+ printf ("TX: failed (1)\n");
+ status = 1;
+ } else {
+ printf ("TX: failed (2)\n");
+ status = 2;
+ }
+ QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket);
+ return status;
+ }
+
+ /* Copy packet to DMA buffer */
+ memset (pUmPacket->skbuff, 0x0, MAX_PACKET_SIZE);
+ memcpy ((void *)pUmPacket->skbuff, (void *)packet, length);
+ pPacket->PacketSize = length;
+ pPacket->Flags |= SND_BD_FLAG_END | SND_BD_FLAG_COAL_NOW;
+ pPacket->u.Tx.FragCount = 1;
+ /* We've already provided a frame ready for transmission */
+ pPacket->Flags &= ~SND_BD_FLAG_TCP_UDP_CKSUM;
+
+ if (LM_SendPacket (pDevice, pPacket) == LM_STATUS_FAILURE) {
+ /*
+ * A lower level send failure will push the packet descriptor back
+ * in the free queue, so just deal with the VxWorks clusters.
+ */
+ if (pUmPacket->skbuff == NULL) {
+ printf ("TX failed (1)!\n");
+ /* Packet was discarded */
+ status = 3;
+ } else {
+ /* A resource problem ... */
+ printf ("TX failed (2)!\n");
+ status = 4;
+ }
+
+ if (QQ_GetEntryCnt (&pDevice->TxPacketFreeQ.Container) == 0) {
+ printf ("TX: emptyQ!\n");
+ pUmDevice->tx_full = 1;
+ }
+ }
+
+ while (pUmDevice->tx_pkt == 0) {
+ /* Service TX */
+ eth_isr ();
+ }
+#if ET_DEBUG
+ printf ("eth_send: 0x%x, %d bytes\n"
+ "[%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x] ...\n",
+ (int)pPacket, length,
+ ptr[0], ptr[1], ptr[2], ptr[3], ptr[4], ptr[5],
+ ptr[6], ptr[7], ptr[8], ptr[9], ptr[10], ptr[11], ptr[12],
+ ptr[13], ptr[14], ptr[15]);
+#endif
+ pUmDevice->tx_pkt = 0;
+ QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket);
+
+ /* Done with send */
+ out:
+ return status;
+}
+
+/* Ethernet receive */
+int eth_rx (void)
+{
+ PLM_PACKET pPacket = NULL;
+ PUM_PACKET pUmPacket = NULL;
+ void *skb;
+ int size = 0;
+
+ while (TRUE) {
+
+ bcm570x_service_isr:
+ /* Pull down packet if it is there */
+ eth_isr ();
+
+ /* Indicate RX packets called */
+ if (pUmDevice->rx_pkt) {
+ /* printf("eth_rx: got a packet...\n"); */
+ pUmDevice->rx_pkt = 0;
+ } else {
+ /* printf("eth_rx: waiting for packet...\n"); */
+ goto bcm570x_service_isr;
+ }
+
+ pPacket = (PLM_PACKET)
+ QQ_PopHead (&pDevice->RxPacketReceivedQ.Container);
+
+ if (pPacket == 0) {
+ printf ("eth_rx: empty packet!\n");
+ goto bcm570x_service_isr;
+ }
+
+ pUmPacket = (PUM_PACKET) pPacket;
+#if ET_DEBUG
+ printf ("eth_rx: packet @0x%x\n", (int)pPacket);
+#endif
+ /* If the packet generated an error, reuse buffer */
+ if ((pPacket->PacketStatus != LM_STATUS_SUCCESS) ||
+ ((size = pPacket->PacketSize) > pDevice->RxMtu)) {
+
+ /* reuse skb */
+ QQ_PushTail (&pDevice->RxPacketFreeQ.Container,
+ pPacket);
+ printf ("eth_rx: error in packet dma!\n");
+ goto bcm570x_service_isr;
+ }
+
+ /* Set size and address */
+ skb = pUmPacket->skbuff;
+ size = pPacket->PacketSize;
+
+ /* Pass the packet up to the protocol
+ * layers.
+ */
+ NetReceive (skb, size);
+
+ /* Free packet buffer */
+ bcm570xPktFree (pUmDevice->index, skb);
+ pUmPacket->skbuff = NULL;
+
+ /* Reuse SKB */
+ QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
+
+ return 0; /* Got a packet, bail ... */
+ }
+ return size;
+}
+
+/* Shut down device */
+void eth_halt (void)
+{
+ int i;
+ if (initialized)
+ if (pDevice && pUmDevice && pUmDevice->opened) {
+ printf ("\neth%d:%s,", pUmDevice->index,
+ pUmDevice->name);
+ printf ("HALT,");
+ /* stop device */
+ LM_Halt (pDevice);
+ printf ("POWER DOWN,");
+ LM_SetPowerState (pDevice, LM_POWER_STATE_D3);
+
+ /* Free the memory allocated by the device in tigon3 */
+ for (i = 0; i < pUmDevice->mem_list_num; i++) {
+ if (pUmDevice->mem_list[i]) {
+ /* sanity check */
+ if (pUmDevice->dma_list[i]) { /* cache-safe memory */
+ free (pUmDevice->mem_list[i]);
+ } else {
+ free (pUmDevice->mem_list[i]); /* normal memory */
+ }
+ }
+ }
+ pUmDevice->opened = 0;
+ free (pDevice);
+ pDevice = NULL;
+ pUmDevice = NULL;
+ initialized = 0;
+ printf ("done - offline.\n");
+ }
+}
+
+/*
+ *
+ * Middle Module: Interface between the HW driver (tigon3 modules) and
+ * the native (SENS) driver. These routines implement the system
+ * interface for tigon3 on VxWorks.
+ */
+
+/* Middle module dependency - size of a packet descriptor */
+int MM_Packet_Desc_Size = sizeof (UM_PACKET);
+
+LM_STATUS
+MM_ReadConfig32 (PLM_DEVICE_BLOCK pDevice,
+ LM_UINT32 Offset, LM_UINT32 * pValue32)
+{
+ UM_DEVICE_BLOCK *pUmDevice;
+ pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
+ pci_read_config_dword (pUmDevice->pdev, Offset, (u32 *) pValue32);
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS
+MM_WriteConfig32 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, LM_UINT32 Value32)
+{
+ UM_DEVICE_BLOCK *pUmDevice;
+ pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
+ pci_write_config_dword (pUmDevice->pdev, Offset, Value32);
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS
+MM_ReadConfig16 (PLM_DEVICE_BLOCK pDevice,
+ LM_UINT32 Offset, LM_UINT16 * pValue16)
+{
+ UM_DEVICE_BLOCK *pUmDevice;
+ pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
+ pci_read_config_word (pUmDevice->pdev, Offset, (u16 *) pValue16);
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS
+MM_WriteConfig16 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, LM_UINT16 Value16)
+{
+ UM_DEVICE_BLOCK *pUmDevice;
+ pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
+ pci_write_config_word (pUmDevice->pdev, Offset, Value16);
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS
+MM_AllocateSharedMemory (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
+ PLM_VOID * pMemoryBlockVirt,
+ PLM_PHYSICAL_ADDRESS pMemoryBlockPhy, LM_BOOL Cached)
+{
+ PLM_VOID pvirt;
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ dma_addr_t mapping;
+
+ pvirt = malloc (BlockSize);
+ mapping = (dma_addr_t) (pvirt);
+ if (!pvirt)
+ return LM_STATUS_FAILURE;
+
+ pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt;
+ pUmDevice->dma_list[pUmDevice->mem_list_num] = mapping;
+ pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize;
+ memset (pvirt, 0, BlockSize);
+
+ *pMemoryBlockVirt = (PLM_VOID) pvirt;
+ MM_SetAddr (pMemoryBlockPhy, (dma_addr_t) mapping);
+
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS
+MM_AllocateMemory (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
+ PLM_VOID * pMemoryBlockVirt)
+{
+ PLM_VOID pvirt;
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+
+ pvirt = malloc (BlockSize);
+
+ if (!pvirt)
+ return LM_STATUS_FAILURE;
+
+ pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt;
+ pUmDevice->dma_list[pUmDevice->mem_list_num] = 0;
+ pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize;
+ memset (pvirt, 0, BlockSize);
+ *pMemoryBlockVirt = pvirt;
+
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS MM_MapMemBase (PLM_DEVICE_BLOCK pDevice)
+{
+ printf ("BCM570x PCI Memory base address @0x%x\n",
+ (unsigned int)pDevice->pMappedMemBase);
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS MM_InitializeUmPackets (PLM_DEVICE_BLOCK pDevice)
+{
+ int i;
+ void *skb;
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ PUM_PACKET pUmPacket = NULL;
+ PLM_PACKET pPacket = NULL;
+
+ for (i = 0; i < pDevice->RxPacketDescCnt; i++) {
+ pPacket = QQ_PopHead (&pDevice->RxPacketFreeQ.Container);
+ pUmPacket = (PUM_PACKET) pPacket;
+
+ if (pPacket == 0) {
+ printf ("MM_InitializeUmPackets: Bad RxPacketFreeQ\n");
+ }
+
+ skb = bcm570xPktAlloc (pUmDevice->index,
+ pPacket->u.Rx.RxBufferSize + 2);
+
+ if (skb == 0) {
+ pUmPacket->skbuff = 0;
+ QQ_PushTail (&pUmDevice->rx_out_of_buf_q.Container,
+ pPacket);
+ printf ("MM_InitializeUmPackets: out of buffer.\n");
+ continue;
+ }
+
+ pUmPacket->skbuff = skb;
+ QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
+ }
+
+ pUmDevice->rx_low_buf_thresh = pDevice->RxPacketDescCnt / 8;
+
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS MM_GetConfig (PLM_DEVICE_BLOCK pDevice)
+{
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ int index = pDevice->index;
+
+ if (auto_speed[index] == 0)
+ pDevice->DisableAutoNeg = TRUE;
+ else
+ pDevice->DisableAutoNeg = FALSE;
+
+ if (line_speed[index] == 0) {
+ pDevice->RequestedMediaType = LM_REQUESTED_MEDIA_TYPE_AUTO;
+ pDevice->DisableAutoNeg = FALSE;
+ } else {
+ if (line_speed[index] == 1000) {
+ if (pDevice->EnableTbi) {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX;
+ } else if (full_duplex[index]) {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX;
+ } else {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS;
+ }
+ if (!pDevice->EnableTbi)
+ pDevice->DisableAutoNeg = FALSE;
+ } else if (line_speed[index] == 100) {
+ if (full_duplex[index]) {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX;
+ } else {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS;
+ }
+ } else if (line_speed[index] == 10) {
+ if (full_duplex[index]) {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX;
+ } else {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS;
+ }
+ } else {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_AUTO;
+ pDevice->DisableAutoNeg = FALSE;
+ }
+
+ }
+ pDevice->FlowControlCap = 0;
+ if (rx_flow_control[index] != 0) {
+ pDevice->FlowControlCap |= LM_FLOW_CONTROL_RECEIVE_PAUSE;
+ }
+ if (tx_flow_control[index] != 0) {
+ pDevice->FlowControlCap |= LM_FLOW_CONTROL_TRANSMIT_PAUSE;
+ }
+ if ((auto_flow_control[index] != 0) &&
+ (pDevice->DisableAutoNeg == FALSE)) {
+
+ pDevice->FlowControlCap |= LM_FLOW_CONTROL_AUTO_PAUSE;
+ if ((tx_flow_control[index] == 0) &&
+ (rx_flow_control[index] == 0)) {
+ pDevice->FlowControlCap |=
+ LM_FLOW_CONTROL_TRANSMIT_PAUSE |
+ LM_FLOW_CONTROL_RECEIVE_PAUSE;
+ }
+ }
+
+ /* Default MTU for now */
+ pUmDevice->mtu = 1500;
+
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ if (pUmDevice->mtu > 1500) {
+ pDevice->RxMtu = pUmDevice->mtu;
+ pDevice->RxJumboDescCnt = DEFAULT_JUMBO_RCV_DESC_COUNT;
+ } else {
+ pDevice->RxJumboDescCnt = 0;
+ }
+ pDevice->RxJumboDescCnt = rx_jumbo_desc_cnt[index];
+#else
+ pDevice->RxMtu = pUmDevice->mtu;
+#endif
+
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ pDevice->UseTaggedStatus = TRUE;
+ pUmDevice->timer_interval = CFG_HZ;
+ } else {
+ pUmDevice->timer_interval = CFG_HZ / 50;
+ }
+
+ pDevice->TxPacketDescCnt = tx_pkt_desc_cnt[index];
+ pDevice->RxStdDescCnt = rx_std_desc_cnt[index];
+ /* Note: adaptive coalescence really isn't adaptive in this driver */
+ pUmDevice->rx_adaptive_coalesce = rx_adaptive_coalesce[index];
+ if (!pUmDevice->rx_adaptive_coalesce) {
+ pDevice->RxCoalescingTicks = rx_coalesce_ticks[index];
+ if (pDevice->RxCoalescingTicks > MAX_RX_COALESCING_TICKS)
+ pDevice->RxCoalescingTicks = MAX_RX_COALESCING_TICKS;
+ pUmDevice->rx_curr_coalesce_ticks = pDevice->RxCoalescingTicks;
+
+ pDevice->RxMaxCoalescedFrames = rx_max_coalesce_frames[index];
+ if (pDevice->RxMaxCoalescedFrames > MAX_RX_MAX_COALESCED_FRAMES)
+ pDevice->RxMaxCoalescedFrames =
+ MAX_RX_MAX_COALESCED_FRAMES;
+ pUmDevice->rx_curr_coalesce_frames =
+ pDevice->RxMaxCoalescedFrames;
+ pDevice->StatsCoalescingTicks = stats_coalesce_ticks[index];
+ if (pDevice->StatsCoalescingTicks > MAX_STATS_COALESCING_TICKS)
+ pDevice->StatsCoalescingTicks =
+ MAX_STATS_COALESCING_TICKS;
+ } else {
+ pUmDevice->rx_curr_coalesce_frames =
+ DEFAULT_RX_MAX_COALESCED_FRAMES;
+ pUmDevice->rx_curr_coalesce_ticks = DEFAULT_RX_COALESCING_TICKS;
+ }
+ pDevice->TxCoalescingTicks = tx_coalesce_ticks[index];
+ if (pDevice->TxCoalescingTicks > MAX_TX_COALESCING_TICKS)
+ pDevice->TxCoalescingTicks = MAX_TX_COALESCING_TICKS;
+ pDevice->TxMaxCoalescedFrames = tx_max_coalesce_frames[index];
+ if (pDevice->TxMaxCoalescedFrames > MAX_TX_MAX_COALESCED_FRAMES)
+ pDevice->TxMaxCoalescedFrames = MAX_TX_MAX_COALESCED_FRAMES;
+
+ if (enable_wol[index]) {
+ pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_MAGIC_PACKET;
+ pDevice->WakeUpMode = LM_WAKE_UP_MODE_MAGIC_PACKET;
+ }
+ pDevice->NicSendBd = TRUE;
+
+ /* Don't update status blocks during interrupt */
+ pDevice->RxCoalescingTicksDuringInt = 0;
+ pDevice->TxCoalescingTicksDuringInt = 0;
+
+ return LM_STATUS_SUCCESS;
+
+}
+
+LM_STATUS MM_StartTxDma (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
+{
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ printf ("Start TX DMA: dev=%d packet @0x%x\n",
+ (int)pUmDevice->index, (unsigned int)pPacket);
+
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS MM_CompleteTxDma (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
+{
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ printf ("Complete TX DMA: dev=%d packet @0x%x\n",
+ (int)pUmDevice->index, (unsigned int)pPacket);
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS MM_IndicateStatus (PLM_DEVICE_BLOCK pDevice, LM_STATUS Status)
+{
+ char buf[128];
+ char lcd[4];
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ LM_FLOW_CONTROL flow_control;
+
+ pUmDevice->delayed_link_ind = 0;
+ memset (lcd, 0x0, 4);
+
+ if (Status == LM_STATUS_LINK_DOWN) {
+ sprintf (buf, "eth%d: %s: NIC Link is down\n",
+ pUmDevice->index, pUmDevice->name);
+ lcd[0] = 'L';
+ lcd[1] = 'N';
+ lcd[2] = 'K';
+ lcd[3] = '?';
+ } else if (Status == LM_STATUS_LINK_ACTIVE) {
+ sprintf (buf, "eth%d:%s: ", pUmDevice->index, pUmDevice->name);
+
+ if (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) {
+ strcat (buf, "1000 Mbps ");
+ lcd[0] = '1';
+ lcd[1] = 'G';
+ lcd[2] = 'B';
+ } else if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS) {
+ strcat (buf, "100 Mbps ");
+ lcd[0] = '1';
+ lcd[1] = '0';
+ lcd[2] = '0';
+ } else if (pDevice->LineSpeed == LM_LINE_SPEED_10MBPS) {
+ strcat (buf, "10 Mbps ");
+ lcd[0] = '1';
+ lcd[1] = '0';
+ lcd[2] = ' ';
+ }
+ if (pDevice->DuplexMode == LM_DUPLEX_MODE_FULL) {
+ strcat (buf, "full duplex");
+ lcd[3] = 'F';
+ } else {
+ strcat (buf, "half duplex");
+ lcd[3] = 'H';
+ }
+ strcat (buf, " link up");
+
+ flow_control = pDevice->FlowControl &
+ (LM_FLOW_CONTROL_RECEIVE_PAUSE |
+ LM_FLOW_CONTROL_TRANSMIT_PAUSE);
+
+ if (flow_control) {
+ if (flow_control & LM_FLOW_CONTROL_RECEIVE_PAUSE) {
+ strcat (buf, ", receive ");
+ if (flow_control &
+ LM_FLOW_CONTROL_TRANSMIT_PAUSE)
+ strcat (buf, " & transmit ");
+ } else {
+ strcat (buf, ", transmit ");
+ }
+ strcat (buf, "flow control ON");
+ } else {
+ strcat (buf, ", flow control OFF");
+ }
+ strcat (buf, "\n");
+ printf ("%s", buf);
+ }
+#if 0
+ sysLedDsply (lcd[0], lcd[1], lcd[2], lcd[3]);
+#endif
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS MM_FreeRxBuffer (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
+{
+
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ PUM_PACKET pUmPacket;
+ void *skb;
+
+ pUmPacket = (PUM_PACKET) pPacket;
+
+ if ((skb = pUmPacket->skbuff))
+ bcm570xPktFree (pUmDevice->index, skb);
+
+ pUmPacket->skbuff = 0;
+
+ return LM_STATUS_SUCCESS;
+}
+
+unsigned long MM_AnGetCurrentTime_us (PAN_STATE_INFO pAnInfo)
+{
+ return get_timer (0);
+}
+
+/*
+ * Transform an MBUF chain into a single MBUF.
+ * This routine will fail if the amount of data in the
+ * chain overflows a transmit buffer. In that case,
+ * the incoming MBUF chain will be freed. This routine can
+ * also fail by not being able to allocate a new MBUF (including
+ * cluster and mbuf headers). In that case the failure is
+ * non-fatal. The incoming cluster chain is not freed, giving
+ * the caller the choice of whether to try a retransmit later.
+ */
+LM_STATUS MM_CoalesceTxBuffer (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
+{
+ PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ void *skbnew;
+ int len = 0;
+
+ if (len == 0)
+ return (LM_STATUS_SUCCESS);
+
+ if (len > MAX_PACKET_SIZE) {
+ printf ("eth%d: xmit frame discarded, too big!, size = %d\n",
+ pUmDevice->index, len);
+ return (LM_STATUS_FAILURE);
+ }
+
+ skbnew = bcm570xPktAlloc (pUmDevice->index, MAX_PACKET_SIZE);
+
+ if (skbnew == NULL) {
+ pUmDevice->tx_full = 1;
+ printf ("eth%d: out of transmit buffers", pUmDevice->index);
+ return (LM_STATUS_FAILURE);
+ }
+
+ /* New packet values */
+ pUmPacket->skbuff = skbnew;
+ pUmPacket->lm_packet.u.Tx.FragCount = 1;
+
+ return (LM_STATUS_SUCCESS);
+}
+
+LM_STATUS MM_IndicateRxPackets (PLM_DEVICE_BLOCK pDevice)
+{
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ pUmDevice->rx_pkt = 1;
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS MM_IndicateTxPackets (PLM_DEVICE_BLOCK pDevice)
+{
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ PLM_PACKET pPacket;
+ PUM_PACKET pUmPacket;
+ void *skb;
+ while (TRUE) {
+
+ pPacket = (PLM_PACKET)
+ QQ_PopHead (&pDevice->TxPacketXmittedQ.Container);
+
+ if (pPacket == 0)
+ break;
+
+ pUmPacket = (PUM_PACKET) pPacket;
+ skb = (void *)pUmPacket->skbuff;
+
+ /*
+ * Free MBLK if we transmitted a fragmented packet or a
+ * non-fragmented packet straight from the VxWorks
+ * buffer pool. If packet was copied to a local transmit
+ * buffer, then there's no MBUF to free, just free
+ * the transmit buffer back to the cluster pool.
+ */
+
+ if (skb)
+ bcm570xPktFree (pUmDevice->index, skb);
+
+ pUmPacket->skbuff = 0;
+ QQ_PushTail (&pDevice->TxPacketFreeQ.Container, pPacket);
+ pUmDevice->tx_pkt = 1;
+ }
+ if (pUmDevice->tx_full) {
+ if (QQ_GetEntryCnt (&pDevice->TxPacketFreeQ.Container) >=
+ (QQ_GetSize (&pDevice->TxPacketFreeQ.Container) >> 1))
+ pUmDevice->tx_full = 0;
+ }
+ return LM_STATUS_SUCCESS;
+}
+
+/*
+ * Scan an MBUF chain until we reach fragment number "frag"
+ * Return its length and physical address.
+ */
+void MM_MapTxDma
+ (PLM_DEVICE_BLOCK pDevice,
+ struct _LM_PACKET *pPacket,
+ T3_64BIT_HOST_ADDR * paddr, LM_UINT32 * len, int frag) {
+ PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
+ *len = pPacket->PacketSize;
+ MM_SetT3Addr (paddr, (dma_addr_t) pUmPacket->skbuff);
+}
+
+/*
+ * Convert an mbuf address, a CPU local virtual address,
+ * to a physical address as seen from a PCI device. Store the
+ * result at paddr.
+ */
+void MM_MapRxDma (PLM_DEVICE_BLOCK pDevice,
+ struct _LM_PACKET *pPacket, T3_64BIT_HOST_ADDR * paddr)
+{
+ PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
+ MM_SetT3Addr (paddr, (dma_addr_t) pUmPacket->skbuff);
+}
+
+void MM_SetAddr (LM_PHYSICAL_ADDRESS * paddr, dma_addr_t addr)
+{
+#if (BITS_PER_LONG == 64)
+ paddr->High = ((unsigned long)addr) >> 32;
+ paddr->Low = ((unsigned long)addr) & 0xffffffff;
+#else
+ paddr->High = 0;
+ paddr->Low = (unsigned long)addr;
+#endif
+}
+
+void MM_SetT3Addr (T3_64BIT_HOST_ADDR * paddr, dma_addr_t addr)
+{
+ unsigned long baddr = (unsigned long)addr;
+#if (BITS_PER_LONG == 64)
+ set_64bit_addr (paddr, baddr & 0xffffffff, baddr >> 32);
+#else
+ set_64bit_addr (paddr, baddr, 0);
+#endif
+}
+
+/*
+ * This combination of `inline' and `extern' has almost the effect of a
+ * macro. The way to use it is to put a function definition in a header
+ * file with these keywords, and put another copy of the definition
+ * (lacking `inline' and `extern') in a library file. The definition in
+ * the header file will cause most calls to the function to be inlined.
+ * If any uses of the function remain, they will refer to the single copy
+ * in the library.
+ */
+void atomic_set (atomic_t * entry, int val)
+{
+ entry->counter = val;
+}
+
+int atomic_read (atomic_t * entry)
+{
+ return entry->counter;
+}
+
+void atomic_inc (atomic_t * entry)
+{
+ if (entry)
+ entry->counter++;
+}
+
+void atomic_dec (atomic_t * entry)
+{
+ if (entry)
+ entry->counter--;
+}
+
+void atomic_sub (int a, atomic_t * entry)
+{
+ if (entry)
+ entry->counter -= a;
+}
+
+void atomic_add (int a, atomic_t * entry)
+{
+ if (entry)
+ entry->counter += a;
+}
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+void QQ_InitQueue (PQQ_CONTAINER pQueue, unsigned int QueueSize)
+{
+ pQueue->Head = 0;
+ pQueue->Tail = 0;
+ pQueue->Size = QueueSize + 1;
+ atomic_set (&pQueue->EntryCnt, 0);
+} /* QQ_InitQueue */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+char QQ_Full (PQQ_CONTAINER pQueue)
+{
+ unsigned int NewHead;
+
+ NewHead = (pQueue->Head + 1) % pQueue->Size;
+
+ return (NewHead == pQueue->Tail);
+} /* QQ_Full */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+char QQ_Empty (PQQ_CONTAINER pQueue)
+{
+ return (pQueue->Head == pQueue->Tail);
+} /* QQ_Empty */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+unsigned int QQ_GetSize (PQQ_CONTAINER pQueue)
+{
+ return pQueue->Size;
+} /* QQ_GetSize */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+unsigned int QQ_GetEntryCnt (PQQ_CONTAINER pQueue)
+{
+ return atomic_read (&pQueue->EntryCnt);
+} /* QQ_GetEntryCnt */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/* TRUE entry was added successfully. */
+/* FALSE queue is full. */
+/******************************************************************************/
+char QQ_PushHead (PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry)
+{
+ unsigned int Head;
+
+ Head = (pQueue->Head + 1) % pQueue->Size;
+
+#if !defined(QQ_NO_OVERFLOW_CHECK)
+ if (Head == pQueue->Tail) {
+ return 0;
+ } /* if */
+#endif /* QQ_NO_OVERFLOW_CHECK */
+
+ pQueue->Array[pQueue->Head] = pEntry;
+ wmb ();
+ pQueue->Head = Head;
+ atomic_inc (&pQueue->EntryCnt);
+
+ return -1;
+} /* QQ_PushHead */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/* TRUE entry was added successfully. */
+/* FALSE queue is full. */
+/******************************************************************************/
+char QQ_PushTail (PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry)
+{
+ unsigned int Tail;
+
+ Tail = pQueue->Tail;
+ if (Tail == 0) {
+ Tail = pQueue->Size;
+ } /* if */
+ Tail--;
+
+#if !defined(QQ_NO_OVERFLOW_CHECK)
+ if (Tail == pQueue->Head) {
+ return 0;
+ } /* if */
+#endif /* QQ_NO_OVERFLOW_CHECK */
+
+ pQueue->Array[Tail] = pEntry;
+ wmb ();
+ pQueue->Tail = Tail;
+ atomic_inc (&pQueue->EntryCnt);
+
+ return -1;
+} /* QQ_PushTail */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+PQQ_ENTRY QQ_PopHead (PQQ_CONTAINER pQueue)
+{
+ unsigned int Head;
+ PQQ_ENTRY Entry;
+
+ Head = pQueue->Head;
+
+#if !defined(QQ_NO_UNDERFLOW_CHECK)
+ if (Head == pQueue->Tail) {
+ return (PQQ_ENTRY) 0;
+ } /* if */
+#endif /* QQ_NO_UNDERFLOW_CHECK */
+
+ if (Head == 0) {
+ Head = pQueue->Size;
+ } /* if */
+ Head--;
+
+ Entry = pQueue->Array[Head];
+ membar ();
+
+ pQueue->Head = Head;
+ atomic_dec (&pQueue->EntryCnt);
+
+ return Entry;
+} /* QQ_PopHead */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+PQQ_ENTRY QQ_PopTail (PQQ_CONTAINER pQueue)
+{
+ unsigned int Tail;
+ PQQ_ENTRY Entry;
+
+ Tail = pQueue->Tail;
+
+#if !defined(QQ_NO_UNDERFLOW_CHECK)
+ if (Tail == pQueue->Head) {
+ return (PQQ_ENTRY) 0;
+ } /* if */
+#endif /* QQ_NO_UNDERFLOW_CHECK */
+
+ Entry = pQueue->Array[Tail];
+ membar ();
+ pQueue->Tail = (Tail + 1) % pQueue->Size;
+ atomic_dec (&pQueue->EntryCnt);
+
+ return Entry;
+} /* QQ_PopTail */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+PQQ_ENTRY QQ_GetHead (PQQ_CONTAINER pQueue, unsigned int Idx)
+{
+ if (Idx >= atomic_read (&pQueue->EntryCnt)) {
+ return (PQQ_ENTRY) 0;
+ }
+
+ if (pQueue->Head > Idx) {
+ Idx = pQueue->Head - Idx;
+ } else {
+ Idx = pQueue->Size - (Idx - pQueue->Head);
+ }
+ Idx--;
+
+ return pQueue->Array[Idx];
+}
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+PQQ_ENTRY QQ_GetTail (PQQ_CONTAINER pQueue, unsigned int Idx)
+{
+ if (Idx >= atomic_read (&pQueue->EntryCnt)) {
+ return (PQQ_ENTRY) 0;
+ }
+
+ Idx += pQueue->Tail;
+ if (Idx >= pQueue->Size) {
+ Idx = Idx - pQueue->Size;
+ }
+
+ return pQueue->Array[Idx];
+}
+
+#endif
diff --git a/drivers/net/bcm570x_autoneg.c b/drivers/net/bcm570x_autoneg.c
new file mode 100644
index 0000000..9023796
--- /dev/null
+++ b/drivers/net/bcm570x_autoneg.c
@@ -0,0 +1,439 @@
+/******************************************************************************/
+/* */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2001 Broadcom */
+/* Corporation. */
+/* All rights reserved. */
+/* */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation, located in the file LICENSE. */
+/* */
+/* History: */
+/******************************************************************************/
+#if !defined(CONFIG_NET_MULTI)
+#if INCLUDE_TBI_SUPPORT
+#include "bcm570x_autoneg.h"
+#include "bcm570x_mm.h"
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+void
+MM_AnTxConfig(
+ PAN_STATE_INFO pAnInfo)
+{
+ PLM_DEVICE_BLOCK pDevice;
+
+ pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext;
+
+ REG_WR(pDevice, MacCtrl.TxAutoNeg, (LM_UINT32) pAnInfo->TxConfig.AsUSHORT);
+
+ pDevice->MacMode |= MAC_MODE_SEND_CONFIGS;
+ REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
+}
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+void
+MM_AnTxIdle(
+ PAN_STATE_INFO pAnInfo)
+{
+ PLM_DEVICE_BLOCK pDevice;
+
+ pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext;
+
+ pDevice->MacMode &= ~MAC_MODE_SEND_CONFIGS;
+ REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
+}
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+char
+MM_AnRxConfig(
+ PAN_STATE_INFO pAnInfo,
+ unsigned short *pRxConfig)
+{
+ PLM_DEVICE_BLOCK pDevice;
+ LM_UINT32 Value32;
+ char Retcode;
+
+ Retcode = AN_FALSE;
+
+ pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext;
+
+ Value32 = REG_RD(pDevice, MacCtrl.Status);
+ if(Value32 & MAC_STATUS_RECEIVING_CFG)
+ {
+ Value32 = REG_RD(pDevice, MacCtrl.RxAutoNeg);
+ *pRxConfig = (unsigned short) Value32;
+
+ Retcode = AN_TRUE;
+ }
+
+ return Retcode;
+}
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+void
+AutonegInit(
+ PAN_STATE_INFO pAnInfo)
+{
+ unsigned long j;
+
+ for(j = 0; j < sizeof(AN_STATE_INFO); j++)
+ {
+ ((unsigned char *) pAnInfo)[j] = 0;
+ }
+
+ /* Initialize the default advertisement register. */
+ pAnInfo->mr_adv_full_duplex = 1;
+ pAnInfo->mr_adv_sym_pause = 1;
+ pAnInfo->mr_adv_asym_pause = 1;
+ pAnInfo->mr_an_enable = 1;
+}
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+AUTONEG_STATUS
+Autoneg8023z(
+ PAN_STATE_INFO pAnInfo)
+{
+ unsigned short RxConfig;
+ unsigned long Delta_us;
+ AUTONEG_STATUS AnRet;
+
+ /* Get the current time. */
+ if(pAnInfo->State == AN_STATE_UNKNOWN)
+ {
+ pAnInfo->RxConfig.AsUSHORT = 0;
+ pAnInfo->CurrentTime_us = 0;
+ pAnInfo->LinkTime_us = 0;
+ pAnInfo->AbilityMatchCfg = 0;
+ pAnInfo->AbilityMatchCnt = 0;
+ pAnInfo->AbilityMatch = AN_FALSE;
+ pAnInfo->IdleMatch = AN_FALSE;
+ pAnInfo->AckMatch = AN_FALSE;
+ }
+
+ /* Increment the timer tick. This function is called every microsecon. */
+/* pAnInfo->CurrentTime_us++; */
+
+ /* Set the AbilityMatch, IdleMatch, and AckMatch flags if their */
+ /* corresponding conditions are satisfied. */
+ if(MM_AnRxConfig(pAnInfo, &RxConfig))
+ {
+ if(RxConfig != pAnInfo->AbilityMatchCfg)
+ {
+ pAnInfo->AbilityMatchCfg = RxConfig;
+ pAnInfo->AbilityMatch = AN_FALSE;
+ pAnInfo->AbilityMatchCnt = 0;
+ }
+ else
+ {
+ pAnInfo->AbilityMatchCnt++;
+ if(pAnInfo->AbilityMatchCnt > 1)
+ {
+ pAnInfo->AbilityMatch = AN_TRUE;
+ pAnInfo->AbilityMatchCfg = RxConfig;
+ }
+ }
+
+ if(RxConfig & AN_CONFIG_ACK)
+ {
+ pAnInfo->AckMatch = AN_TRUE;
+ }
+ else
+ {
+ pAnInfo->AckMatch = AN_FALSE;
+ }
+
+ pAnInfo->IdleMatch = AN_FALSE;
+ }
+ else
+ {
+ pAnInfo->IdleMatch = AN_TRUE;
+
+ pAnInfo->AbilityMatchCfg = 0;
+ pAnInfo->AbilityMatchCnt = 0;
+ pAnInfo->AbilityMatch = AN_FALSE;
+ pAnInfo->AckMatch = AN_FALSE;
+
+ RxConfig = 0;
+ }
+
+ /* Save the last Config. */
+ pAnInfo->RxConfig.AsUSHORT = RxConfig;
+
+ /* Default return code. */
+ AnRet = AUTONEG_STATUS_OK;
+
+ /* Autoneg state machine as defined in 802.3z section 37.3.1.5. */
+ switch(pAnInfo->State)
+ {
+ case AN_STATE_UNKNOWN:
+ if(pAnInfo->mr_an_enable || pAnInfo->mr_restart_an)
+ {
+ pAnInfo->CurrentTime_us = 0;
+ pAnInfo->State = AN_STATE_AN_ENABLE;
+ }
+
+ /* Fall through.*/
+
+ case AN_STATE_AN_ENABLE:
+ pAnInfo->mr_an_complete = AN_FALSE;
+ pAnInfo->mr_page_rx = AN_FALSE;
+
+ if(pAnInfo->mr_an_enable)
+ {
+ pAnInfo->LinkTime_us = 0;
+ pAnInfo->AbilityMatchCfg = 0;
+ pAnInfo->AbilityMatchCnt = 0;
+ pAnInfo->AbilityMatch = AN_FALSE;
+ pAnInfo->IdleMatch = AN_FALSE;
+ pAnInfo->AckMatch = AN_FALSE;
+
+ pAnInfo->State = AN_STATE_AN_RESTART_INIT;
+ }
+ else
+ {
+ pAnInfo->State = AN_STATE_DISABLE_LINK_OK;
+ }
+ break;
+
+ case AN_STATE_AN_RESTART_INIT:
+ pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us;
+ pAnInfo->mr_np_loaded = AN_FALSE;
+
+ pAnInfo->TxConfig.AsUSHORT = 0;
+ MM_AnTxConfig(pAnInfo);
+
+ AnRet = AUTONEG_STATUS_TIMER_ENABLED;
+
+ pAnInfo->State = AN_STATE_AN_RESTART;
+
+ /* Fall through.*/
+
+ case AN_STATE_AN_RESTART:
+ /* Get the current time and compute the delta with the saved */
+ /* link timer. */
+ Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us;
+ if(Delta_us > AN_LINK_TIMER_INTERVAL_US)
+ {
+ pAnInfo->State = AN_STATE_ABILITY_DETECT_INIT;
+ }
+ else
+ {
+ AnRet = AUTONEG_STATUS_TIMER_ENABLED;
+ }
+ break;
+
+ case AN_STATE_DISABLE_LINK_OK:
+ AnRet = AUTONEG_STATUS_DONE;
+ break;
+
+ case AN_STATE_ABILITY_DETECT_INIT:
+ /* Note: in the state diagram, this variable is set to */
+ /* mr_adv_ability<12>. Is this right?. */
+ pAnInfo->mr_toggle_tx = AN_FALSE;
+
+ /* Send the config as advertised in the advertisement register. */
+ pAnInfo->TxConfig.AsUSHORT = 0;
+ pAnInfo->TxConfig.D5_FD = pAnInfo->mr_adv_full_duplex;
+ pAnInfo->TxConfig.D6_HD = pAnInfo->mr_adv_half_duplex;
+ pAnInfo->TxConfig.D7_PS1 = pAnInfo->mr_adv_sym_pause;
+ pAnInfo->TxConfig.D8_PS2 = pAnInfo->mr_adv_asym_pause;
+ pAnInfo->TxConfig.D12_RF1 = pAnInfo->mr_adv_remote_fault1;
+ pAnInfo->TxConfig.D13_RF2 = pAnInfo->mr_adv_remote_fault2;
+ pAnInfo->TxConfig.D15_NP = pAnInfo->mr_adv_next_page;
+
+ MM_AnTxConfig(pAnInfo);
+
+ pAnInfo->State = AN_STATE_ABILITY_DETECT;
+
+ break;
+
+ case AN_STATE_ABILITY_DETECT:
+ if(pAnInfo->AbilityMatch == AN_TRUE &&
+ pAnInfo->RxConfig.AsUSHORT != 0)
+ {
+ pAnInfo->State = AN_STATE_ACK_DETECT_INIT;
+ }
+
+ break;
+
+ case AN_STATE_ACK_DETECT_INIT:
+ pAnInfo->TxConfig.D14_ACK = 1;
+ MM_AnTxConfig(pAnInfo);
+
+ pAnInfo->State = AN_STATE_ACK_DETECT;
+
+ /* Fall through. */
+
+ case AN_STATE_ACK_DETECT:
+ if(pAnInfo->AckMatch == AN_TRUE)
+ {
+ if((pAnInfo->RxConfig.AsUSHORT & ~AN_CONFIG_ACK) ==
+ (pAnInfo->AbilityMatchCfg & ~AN_CONFIG_ACK))
+ {
+ pAnInfo->State = AN_STATE_COMPLETE_ACK_INIT;
+ }
+ else
+ {
+ pAnInfo->State = AN_STATE_AN_ENABLE;
+ }
+ }
+ else if(pAnInfo->AbilityMatch == AN_TRUE &&
+ pAnInfo->RxConfig.AsUSHORT == 0)
+ {
+ pAnInfo->State = AN_STATE_AN_ENABLE;
+ }
+
+ break;
+
+ case AN_STATE_COMPLETE_ACK_INIT:
+ /* Make sure invalid bits are not set. */
+ if(pAnInfo->RxConfig.bits.D0 || pAnInfo->RxConfig.bits.D1 ||
+ pAnInfo->RxConfig.bits.D2 || pAnInfo->RxConfig.bits.D3 ||
+ pAnInfo->RxConfig.bits.D4 || pAnInfo->RxConfig.bits.D9 ||
+ pAnInfo->RxConfig.bits.D10 || pAnInfo->RxConfig.bits.D11)
+ {
+ AnRet = AUTONEG_STATUS_FAILED;
+ break;
+ }
+
+ /* Set up the link partner advertisement register. */
+ pAnInfo->mr_lp_adv_full_duplex = pAnInfo->RxConfig.D5_FD;
+ pAnInfo->mr_lp_adv_half_duplex = pAnInfo->RxConfig.D6_HD;
+ pAnInfo->mr_lp_adv_sym_pause = pAnInfo->RxConfig.D7_PS1;
+ pAnInfo->mr_lp_adv_asym_pause = pAnInfo->RxConfig.D8_PS2;
+ pAnInfo->mr_lp_adv_remote_fault1 = pAnInfo->RxConfig.D12_RF1;
+ pAnInfo->mr_lp_adv_remote_fault2 = pAnInfo->RxConfig.D13_RF2;
+ pAnInfo->mr_lp_adv_next_page = pAnInfo->RxConfig.D15_NP;
+
+ pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us;
+
+ pAnInfo->mr_toggle_tx = !pAnInfo->mr_toggle_tx;
+ pAnInfo->mr_toggle_rx = pAnInfo->RxConfig.bits.D11;
+ pAnInfo->mr_np_rx = pAnInfo->RxConfig.D15_NP;
+ pAnInfo->mr_page_rx = AN_TRUE;
+
+ pAnInfo->State = AN_STATE_COMPLETE_ACK;
+ AnRet = AUTONEG_STATUS_TIMER_ENABLED;
+
+ break;
+
+ case AN_STATE_COMPLETE_ACK:
+ if(pAnInfo->AbilityMatch == AN_TRUE &&
+ pAnInfo->RxConfig.AsUSHORT == 0)
+ {
+ pAnInfo->State = AN_STATE_AN_ENABLE;
+ break;
+ }
+
+ Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us;
+
+ if(Delta_us > AN_LINK_TIMER_INTERVAL_US)
+ {
+ if(pAnInfo->mr_adv_next_page == 0 ||
+ pAnInfo->mr_lp_adv_next_page == 0)
+ {
+ pAnInfo->State = AN_STATE_IDLE_DETECT_INIT;
+ }
+ else
+ {
+ if(pAnInfo->TxConfig.bits.D15 == 0 &&
+ pAnInfo->mr_np_rx == 0)
+ {
+ pAnInfo->State = AN_STATE_IDLE_DETECT_INIT;
+ }
+ else
+ {
+ AnRet = AUTONEG_STATUS_FAILED;
+ }
+ }
+ }
+
+ break;
+
+ case AN_STATE_IDLE_DETECT_INIT:
+ pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us;
+
+ MM_AnTxIdle(pAnInfo);
+
+ pAnInfo->State = AN_STATE_IDLE_DETECT;
+
+ AnRet = AUTONEG_STATUS_TIMER_ENABLED;
+
+ break;
+
+ case AN_STATE_IDLE_DETECT:
+ if(pAnInfo->AbilityMatch == AN_TRUE &&
+ pAnInfo->RxConfig.AsUSHORT == 0)
+ {
+ pAnInfo->State = AN_STATE_AN_ENABLE;
+ break;
+ }
+
+ Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us;
+ if(Delta_us > AN_LINK_TIMER_INTERVAL_US)
+ {
+#if 0
+/* if(pAnInfo->IdleMatch == AN_TRUE) */
+/* { */
+#endif
+ pAnInfo->State = AN_STATE_LINK_OK;
+#if 0
+/* } */
+/* else */
+/* { */
+/* AnRet = AUTONEG_STATUS_FAILED; */
+/* break; */
+/* } */
+#endif
+ }
+
+ break;
+
+ case AN_STATE_LINK_OK:
+ pAnInfo->mr_an_complete = AN_TRUE;
+ pAnInfo->mr_link_ok = AN_TRUE;
+ AnRet = AUTONEG_STATUS_DONE;
+
+ break;
+
+ case AN_STATE_NEXT_PAGE_WAIT_INIT:
+ break;
+
+ case AN_STATE_NEXT_PAGE_WAIT:
+ break;
+
+ default:
+ AnRet = AUTONEG_STATUS_FAILED;
+ break;
+ }
+
+ return AnRet;
+}
+#endif /* INCLUDE_TBI_SUPPORT */
+
+#endif /* !defined(CONFIG_NET_MULTI) */
diff --git a/drivers/net/bcm570x_autoneg.h b/drivers/net/bcm570x_autoneg.h
new file mode 100644
index 0000000..7830944
--- /dev/null
+++ b/drivers/net/bcm570x_autoneg.h
@@ -0,0 +1,408 @@
+/******************************************************************************/
+/* */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2001 Broadcom */
+/* Corporation. */
+/* All rights reserved. */
+/* */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation, located in the file LICENSE. */
+/* */
+/* History: */
+/******************************************************************************/
+
+
+#ifndef AUTONEG_H
+#define AUTONEG_H
+
+
+/******************************************************************************/
+/* Constants. */
+/******************************************************************************/
+
+#define AN_LINK_TIMER_INTERVAL_US 9000 /* 10ms */
+
+/* TRUE, FALSE */
+#define AN_TRUE 1
+#define AN_FALSE 0
+
+
+/******************************************************************************/
+/* Main data structure for keeping track of 802.3z auto-negotation state */
+/* variables as shown in Figure 37-6 of the IEEE 802.3z specification. */
+/******************************************************************************/
+
+typedef struct
+{
+ /* Current auto-negotiation state. */
+ unsigned long State;
+ #define AN_STATE_UNKNOWN 0
+ #define AN_STATE_AN_ENABLE 1
+ #define AN_STATE_AN_RESTART_INIT 2
+ #define AN_STATE_AN_RESTART 3
+ #define AN_STATE_DISABLE_LINK_OK 4
+ #define AN_STATE_ABILITY_DETECT_INIT 5
+ #define AN_STATE_ABILITY_DETECT 6
+ #define AN_STATE_ACK_DETECT_INIT 7
+ #define AN_STATE_ACK_DETECT 8
+ #define AN_STATE_COMPLETE_ACK_INIT 9
+ #define AN_STATE_COMPLETE_ACK 10
+ #define AN_STATE_IDLE_DETECT_INIT 11
+ #define AN_STATE_IDLE_DETECT 12
+ #define AN_STATE_LINK_OK 13
+ #define AN_STATE_NEXT_PAGE_WAIT_INIT 14
+ #define AN_STATE_NEXT_PAGE_WAIT 16
+
+ /* Link timer. */
+ unsigned long LinkTime_us;
+
+ /* Current time. */
+ unsigned long CurrentTime_us;
+
+ /* Need these values for consistency check. */
+ unsigned short AbilityMatchCfg;
+
+ /* Ability, idle, and ack match functions. */
+ unsigned long AbilityMatchCnt;
+ char AbilityMatch;
+ char IdleMatch;
+ char AckMatch;
+
+ /* Tx config data */
+ union
+ {
+ /* The TxConfig register is arranged as follows: */
+ /* */
+ /* MSB LSB */
+ /* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ */
+ /* | D7| D6| D5| D4| D3| D2| D1| D0|D15|D14|D13|D12|D11|D10| D9| D8| */
+ /* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ */
+ struct
+ {
+#ifdef BIG_ENDIAN_HOST
+ unsigned int D7:1; /* PS1 */
+ unsigned int D6:1; /* HD */
+ unsigned int D5:1; /* FD */
+ unsigned int D4:1;
+ unsigned int D3:1;
+ unsigned int D2:1;
+ unsigned int D1:1;
+ unsigned int D0:1;
+ unsigned int D15:1; /* NP */
+ unsigned int D14:1; /* ACK */
+ unsigned int D13:1; /* RF2 */
+ unsigned int D12:1; /* RF1 */
+ unsigned int D11:1;
+ unsigned int D10:1;
+ unsigned int D9:1;
+ unsigned int D8:1; /* PS2 */
+#else /* BIG_ENDIAN_HOST */
+ unsigned int D8:1; /* PS2 */
+ unsigned int D9:1;
+ unsigned int D10:1;
+ unsigned int D11:1;
+ unsigned int D12:1; /* RF1 */
+ unsigned int D13:1; /* RF2 */
+ unsigned int D14:1; /* ACK */
+ unsigned int D15:1; /* NP */
+ unsigned int D0:1;
+ unsigned int D1:1;
+ unsigned int D2:1;
+ unsigned int D3:1;
+ unsigned int D4:1;
+ unsigned int D5:1; /* FD */
+ unsigned int D6:1; /* HD */
+ unsigned int D7:1; /* PS1 */
+#endif
+ } bits;
+
+ unsigned short AsUSHORT;
+
+ #define D8_PS2 bits.D8
+ #define D12_RF1 bits.D12
+ #define D13_RF2 bits.D13
+ #define D14_ACK bits.D14
+ #define D15_NP bits.D15
+ #define D5_FD bits.D5
+ #define D6_HD bits.D6
+ #define D7_PS1 bits.D7
+ } TxConfig;
+
+ /* Rx config data */
+ union
+ {
+ /* The RxConfig register is arranged as follows: */
+ /* */
+ /* MSB LSB */
+ /* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ */
+ /* | D7| D6| D5| D4| D3| D2| D1| D0|D15|D14|D13|D12|D11|D10| D9| D8| */
+ /* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ */
+ struct
+ {
+#ifdef BIG_ENDIAN_HOST
+ unsigned int D7:1; /* PS1 */
+ unsigned int D6:1; /* HD */
+ unsigned int D5:1; /* FD */
+ unsigned int D4:1;
+ unsigned int D3:1;
+ unsigned int D2:1;
+ unsigned int D1:1;
+ unsigned int D0:1;
+ unsigned int D15:1; /* NP */
+ unsigned int D14:1; /* ACK */
+ unsigned int D13:1; /* RF2 */
+ unsigned int D12:1; /* RF1 */
+ unsigned int D11:1;
+ unsigned int D10:1;
+ unsigned int D9:1;
+ unsigned int D8:1; /* PS2 */
+#else /* BIG_ENDIAN_HOST */
+ unsigned int D8:1; /* PS2 */
+ unsigned int D9:1;
+ unsigned int D10:1;
+ unsigned int D11:1;
+ unsigned int D12:1; /* RF1 */
+ unsigned int D13:1; /* RF2 */
+ unsigned int D14:1; /* ACK */
+ unsigned int D15:1; /* NP */
+ unsigned int D0:1;
+ unsigned int D1:1;
+ unsigned int D2:1;
+ unsigned int D3:1;
+ unsigned int D4:1;
+ unsigned int D5:1; /* FD */
+ unsigned int D6:1; /* HD */
+ unsigned int D7:1; /* PS1 */
+#endif
+ } bits;
+
+ unsigned short AsUSHORT;
+ } RxConfig;
+
+ #define AN_CONFIG_NP 0x0080
+ #define AN_CONFIG_ACK 0x0040
+ #define AN_CONFIG_RF2 0x0020
+ #define AN_CONFIG_RF1 0x0010
+ #define AN_CONFIG_PS2 0x0001
+ #define AN_CONFIG_PS1 0x8000
+ #define AN_CONFIG_HD 0x4000
+ #define AN_CONFIG_FD 0x2000
+
+
+ /* Management registers. */
+
+ /* Control register. */
+ union
+ {
+ struct
+ {
+ unsigned int an_enable:1;
+ unsigned int loopback:1;
+ unsigned int reset:1;
+ unsigned int restart_an:1;
+ } bits;
+
+ unsigned short AsUSHORT;
+
+ #define mr_an_enable Mr0.bits.an_enable
+ #define mr_loopback Mr0.bits.loopback
+ #define mr_main_reset Mr0.bits.reset
+ #define mr_restart_an Mr0.bits.restart_an
+ } Mr0;
+
+ /* Status register. */
+ union
+ {
+ struct
+ {
+ unsigned int an_complete:1;
+ unsigned int link_ok:1;
+ } bits;
+
+ unsigned short AsUSHORT;
+
+ #define mr_an_complete Mr1.bits.an_complete
+ #define mr_link_ok Mr1.bits.link_ok
+ } Mr1;
+
+ /* Advertisement register. */
+ union
+ {
+ struct
+ {
+ unsigned int reserved_4:5;
+ unsigned int full_duplex:1;
+ unsigned int half_duplex:1;
+ unsigned int sym_pause:1;
+ unsigned int asym_pause:1;
+ unsigned int reserved_11:3;
+ unsigned int remote_fault1:1;
+ unsigned int remote_fault2:1;
+ unsigned int reserved_14:1;
+ unsigned int next_page:1;
+ } bits;
+
+ unsigned short AsUSHORT;
+
+ #define mr_adv_full_duplex Mr4.bits.full_duplex
+ #define mr_adv_half_duplex Mr4.bits.half_duplex
+ #define mr_adv_sym_pause Mr4.bits.sym_pause
+ #define mr_adv_asym_pause Mr4.bits.asym_pause
+ #define mr_adv_remote_fault1 Mr4.bits.remote_fault1
+ #define mr_adv_remote_fault2 Mr4.bits.remote_fault2
+ #define mr_adv_next_page Mr4.bits.next_page
+ } Mr4;
+
+ /* Link partner advertisement register. */
+ union
+ {
+ struct
+ {
+ unsigned int reserved_4:5;
+ unsigned int lp_full_duplex:1;
+ unsigned int lp_half_duplex:1;
+ unsigned int lp_sym_pause:1;
+ unsigned int lp_asym_pause:1;
+ unsigned int reserved_11:3;
+ unsigned int lp_remote_fault1:1;
+ unsigned int lp_remote_fault2:1;
+ unsigned int lp_ack:1;
+ unsigned int lp_next_page:1;
+ } bits;
+
+ unsigned short AsUSHORT;
+
+ #define mr_lp_adv_full_duplex Mr5.bits.lp_full_duplex
+ #define mr_lp_adv_half_duplex Mr5.bits.lp_half_duplex
+ #define mr_lp_adv_sym_pause Mr5.bits.lp_sym_pause
+ #define mr_lp_adv_asym_pause Mr5.bits.lp_asym_pause
+ #define mr_lp_adv_remote_fault1 Mr5.bits.lp_remote_fault1
+ #define mr_lp_adv_remote_fault2 Mr5.bits.lp_remote_fault2
+ #define mr_lp_adv_next_page Mr5.bits.lp_next_page
+ } Mr5;
+
+ /* Auto-negotiation expansion register. */
+ union
+ {
+ struct
+ {
+ unsigned int reserved_0:1;
+ unsigned int page_received:1;
+ unsigned int next_pageable:1;
+ unsigned int reserved_15:13;
+ } bits;
+
+ unsigned short AsUSHORT;
+ } Mr6;
+
+ /* Auto-negotiation next page transmit register. */
+ union
+ {
+ struct
+ {
+ unsigned int code_field:11;
+ unsigned int toggle:1;
+ unsigned int ack2:1;
+ unsigned int message_page:1;
+ unsigned int reserved_14:1;
+ unsigned int next_page:1;
+ } bits;
+
+ unsigned short AsUSHORT;
+
+ #define mr_np_tx Mr7.AsUSHORT
+ } Mr7;
+
+ /* Auto-negotiation link partner ability register. */
+ union
+ {
+ struct
+ {
+ unsigned int code_field:11;
+ unsigned int toggle:1;
+ unsigned int ack2:1;
+ unsigned int message_page:1;
+ unsigned int ack:1;
+ unsigned int next_page:1;
+ } bits;
+
+ unsigned short AsUSHORT;
+
+ #define mr_lp_np_rx Mr8.AsUSHORT
+ } Mr8;
+
+ /* Extended status register. */
+ union
+ {
+ struct
+ {
+ unsigned int reserved_11:12;
+ unsigned int base1000_t_hd:1;
+ unsigned int base1000_t_fd:1;
+ unsigned int base1000_x_hd:1;
+ unsigned int base1000_x_fd:1;
+ } bits;
+
+ unsigned short AsUSHORT;
+ } Mr15;
+
+ /* Miscellaneous state variables. */
+ union
+ {
+ struct
+ {
+ unsigned int toggle_tx:1;
+ unsigned int toggle_rx:1;
+ unsigned int np_rx:1;
+ unsigned int page_rx:1;
+ unsigned int np_loaded:1;
+ } bits;
+
+ unsigned short AsUSHORT;
+
+ #define mr_toggle_tx MrMisc.bits.toggle_tx
+ #define mr_toggle_rx MrMisc.bits.toggle_rx
+ #define mr_np_rx MrMisc.bits.np_rx
+ #define mr_page_rx MrMisc.bits.page_rx
+ #define mr_np_loaded MrMisc.bits.np_loaded
+ } MrMisc;
+
+
+ /* Implement specifics */
+
+ /* Pointer to the operating system specific data structure. */
+ void *pContext;
+} AN_STATE_INFO, *PAN_STATE_INFO;
+
+
+/******************************************************************************/
+/* Return code of Autoneg8023z. */
+/******************************************************************************/
+
+typedef enum
+{
+ AUTONEG_STATUS_OK = 0,
+ AUTONEG_STATUS_DONE = 1,
+ AUTONEG_STATUS_TIMER_ENABLED = 2,
+ AUTONEG_STATUS_FAILED = 0xfffffff
+} AUTONEG_STATUS, *PAUTONEG_STATUS;
+
+
+/******************************************************************************/
+/* Function prototypes. */
+/******************************************************************************/
+
+AUTONEG_STATUS Autoneg8023z(PAN_STATE_INFO pAnInfo);
+void AutonegInit(PAN_STATE_INFO pAnInfo);
+
+
+/******************************************************************************/
+/* The following functions are defined in the os-dependent module. */
+/******************************************************************************/
+
+void MM_AnTxConfig(PAN_STATE_INFO pAnInfo);
+void MM_AnTxIdle(PAN_STATE_INFO pAnInfo);
+char MM_AnRxConfig(PAN_STATE_INFO pAnInfo, unsigned short *pRxConfig);
+
+
+#endif /* AUTONEG_H */
diff --git a/drivers/net/bcm570x_bits.h b/drivers/net/bcm570x_bits.h
new file mode 100644
index 0000000..615d61e
--- /dev/null
+++ b/drivers/net/bcm570x_bits.h
@@ -0,0 +1,57 @@
+
+/******************************************************************************/
+/* */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */
+/* Corporation. */
+/* All rights reserved. */
+/* */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation, located in the file LICENSE. */
+/* */
+/* History: */
+/* 02/25/00 Hav Khauv Initial version. */
+/******************************************************************************/
+
+#ifndef BITS_H
+#define BITS_H
+
+
+/******************************************************************************/
+/* Bit Mask definitions */
+/******************************************************************************/
+#define BIT_NONE 0x00
+#define BIT_0 0x01
+#define BIT_1 0x02
+#define BIT_2 0x04
+#define BIT_3 0x08
+#define BIT_4 0x10
+#define BIT_5 0x20
+#define BIT_6 0x40
+#define BIT_7 0x80
+#define BIT_8 0x0100
+#define BIT_9 0x0200
+#define BIT_10 0x0400
+#define BIT_11 0x0800
+#define BIT_12 0x1000
+#define BIT_13 0x2000
+#define BIT_14 0x4000
+#define BIT_15 0x8000
+#define BIT_16 0x010000
+#define BIT_17 0x020000
+#define BIT_18 0x040000
+#define BIT_19 0x080000
+#define BIT_20 0x100000
+#define BIT_21 0x200000
+#define BIT_22 0x400000
+#define BIT_23 0x800000
+#define BIT_24 0x01000000
+#define BIT_25 0x02000000
+#define BIT_26 0x04000000
+#define BIT_27 0x08000000
+#define BIT_28 0x10000000
+#define BIT_29 0x20000000
+#define BIT_30 0x40000000
+#define BIT_31 0x80000000
+
+#endif /* BITS_H */
diff --git a/drivers/net/bcm570x_debug.h b/drivers/net/bcm570x_debug.h
new file mode 100644
index 0000000..88e209b
--- /dev/null
+++ b/drivers/net/bcm570x_debug.h
@@ -0,0 +1,109 @@
+
+/******************************************************************************/
+/* */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */
+/* Corporation. */
+/* All rights reserved. */
+/* */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation, located in the file LICENSE. */
+/* */
+/* History: */
+/* 02/25/00 Hav Khauv Initial version. */
+/******************************************************************************/
+
+#ifndef DEBUG_H
+#define DEBUG_H
+
+#ifdef VXWORKS
+#include <vxWorks.h>
+#endif
+
+/******************************************************************************/
+/* Debug macros */
+/******************************************************************************/
+
+/* Code path for controlling output debug messages. */
+/* Define your code path here. */
+#define CP_INIT 0x010000
+#define CP_SEND 0x020000
+#define CP_RCV 0x040000
+#define CP_INT 0x080000
+#define CP_UINIT 0x100000
+#define CP_RESET 0x200000
+
+#define CP_ALL (CP_INIT | CP_SEND | CP_RCV | CP_INT | \
+ CP_RESET | CP_UINIT)
+
+#define CP_MASK 0xffff0000
+
+
+/* Debug message levels. */
+#define LV_VERBOSE 0x03
+#define LV_INFORM 0x02
+#define LV_WARN 0x01
+#define LV_FATAL 0x00
+
+#define LV_MASK 0xffff
+
+
+/* Code path and messsage level combined. These are the first argument of */
+/* the DbgMessage macro. */
+#define INIT_V (CP_INIT | LV_VERBOSE)
+#define INIT_I (CP_INIT | LV_INFORM)
+#define INIT_W (CP_INIT | LV_WARN)
+#define SEND_V (CP_SEND | LV_VERBOSE)
+#define SEND_I (CP_SEND | LV_INFORM)
+#define SEND_W (CP_SEND | LV_WARN)
+#define RCV_V (CP_RCV | LV_VERBOSE)
+#define RCV_I (CP_RCV | LV_INFORM)
+#define RCV_W (CP_RCV | LV_WARN)
+#define INT_V (CP_INT | LV_VERBOSE)
+#define INT_I (CP_INT | LV_INFORM)
+#define INT_W (CP_INT | LV_WARN)
+#define UINIT_V (CP_UINIT | LV_VERBOSE)
+#define UINIT_I (CP_UINIT | LV_INFORM)
+#define UINIT_W (CP_UINIT | LV_WARN)
+#define RESET_V (CP_RESET | LV_VERBOSE)
+#define RESET_I (CP_RESET | LV_INFORM)
+#define RESET_W (CP_RESET | LV_WARN)
+#define CPALL_V (CP_ALL | LV_VERBOSE)
+#define CPALL_I (CP_ALL | LV_INFORM)
+#define CPALL_W (CP_ALL | LV_WARN)
+
+
+/* All code path message levels. */
+#define FATAL (CP_ALL | LV_FATAL)
+#define WARN (CP_ALL | LV_WARN)
+#define INFORM (CP_ALL | LV_INFORM)
+#define VERBOSE (CP_ALL | LV_VERBOSE)
+
+
+/* These constants control the message output. */
+/* Set your debug message output level and code path here. */
+#ifndef DBG_MSG_CP
+#define DBG_MSG_CP CP_ALL /* Where to output messages. */
+#endif
+
+#ifndef DBG_MSG_LV
+#define DBG_MSG_LV LV_VERBOSE /* Level of message output. */
+#endif
+
+/* DbgMessage macro. */
+#if DBG
+#define DbgMessage(CNTRL, MESSAGE) \
+ if((CNTRL & DBG_MSG_CP) && ((CNTRL & LV_MASK) <= DBG_MSG_LV)) \
+ printf MESSAGE
+#define DbgBreak() DbgBreakPoint()
+#undef STATIC
+#define STATIC
+#else
+#define DbgMessage(CNTRL, MESSAGE)
+#define DbgBreak()
+#undef STATIC
+#define STATIC static
+#endif /* DBG */
+
+
+#endif /* DEBUG_H */
diff --git a/drivers/net/bcm570x_lm.h b/drivers/net/bcm570x_lm.h
new file mode 100644
index 0000000..2ea6ca8
--- /dev/null
+++ b/drivers/net/bcm570x_lm.h
@@ -0,0 +1,434 @@
+
+/******************************************************************************/
+/* */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */
+/* Corporation. */
+/* All rights reserved. */
+/* */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation, located in the file LICENSE. */
+/* */
+/* History: */
+/* 02/25/00 Hav Khauv Initial version. */
+/******************************************************************************/
+
+#ifndef LM_H
+#define LM_H
+
+#include "bcm570x_queue.h"
+#include "bcm570x_bits.h"
+
+/******************************************************************************/
+/* Basic types. */
+/******************************************************************************/
+
+typedef char LM_CHAR, *PLM_CHAR;
+typedef unsigned int LM_UINT, *PLM_UINT;
+typedef unsigned char LM_UINT8, *PLM_UINT8;
+typedef unsigned short LM_UINT16, *PLM_UINT16;
+typedef unsigned int LM_UINT32, *PLM_UINT32;
+typedef unsigned int LM_COUNTER, *PLM_COUNTER;
+typedef void LM_VOID, *PLM_VOID;
+typedef char LM_BOOL, *PLM_BOOL;
+
+/* 64bit value. */
+typedef struct {
+#ifdef BIG_ENDIAN_HOST
+ LM_UINT32 High;
+ LM_UINT32 Low;
+#else /* BIG_ENDIAN_HOST */
+ LM_UINT32 Low;
+ LM_UINT32 High;
+#endif /* !BIG_ENDIAN_HOST */
+} LM_UINT64, *PLM_UINT64;
+
+typedef LM_UINT64 LM_PHYSICAL_ADDRESS, *PLM_PHYSICAL_ADDRESS;
+
+/* void LM_INC_PHYSICAL_ADDRESS(PLM_PHYSICAL_ADDRESS pAddr,LM_UINT32 IncSize) */
+#define LM_INC_PHYSICAL_ADDRESS(pAddr, IncSize) \
+ { \
+ LM_UINT32 OrgLow; \
+ \
+ OrgLow = (pAddr)->Low; \
+ (pAddr)->Low += IncSize; \
+ if((pAddr)->Low < OrgLow) { \
+ (pAddr)->High++; /* Wrap around. */ \
+ } \
+ }
+
+#ifndef NULL
+#define NULL ((void *) 0)
+#endif /* NULL */
+
+#ifndef OFFSETOF
+#define OFFSETOF(_s, _m) (MM_UINT_PTR(&(((_s *) 0)->_m)))
+#endif /* OFFSETOF */
+
+/******************************************************************************/
+/* Simple macros. */
+/******************************************************************************/
+
+#define IS_ETH_BROADCAST(_pEthAddr) \
+ (((unsigned char *) (_pEthAddr))[0] == ((unsigned char) 0xff))
+
+#define IS_ETH_MULTICAST(_pEthAddr) \
+ (((unsigned char *) (_pEthAddr))[0] & ((unsigned char) 0x01))
+
+#define IS_ETH_ADDRESS_EQUAL(_pEtherAddr1, _pEtherAddr2) \
+ ((((unsigned char *) (_pEtherAddr1))[0] == \
+ ((unsigned char *) (_pEtherAddr2))[0]) && \
+ (((unsigned char *) (_pEtherAddr1))[1] == \
+ ((unsigned char *) (_pEtherAddr2))[1]) && \
+ (((unsigned char *) (_pEtherAddr1))[2] == \
+ ((unsigned char *) (_pEtherAddr2))[2]) && \
+ (((unsigned char *) (_pEtherAddr1))[3] == \
+ ((unsigned char *) (_pEtherAddr2))[3]) && \
+ (((unsigned char *) (_pEtherAddr1))[4] == \
+ ((unsigned char *) (_pEtherAddr2))[4]) && \
+ (((unsigned char *) (_pEtherAddr1))[5] == \
+ ((unsigned char *) (_pEtherAddr2))[5]))
+
+#define COPY_ETH_ADDRESS(_Src, _Dst) \
+ ((unsigned char *) (_Dst))[0] = ((unsigned char *) (_Src))[0]; \
+ ((unsigned char *) (_Dst))[1] = ((unsigned char *) (_Src))[1]; \
+ ((unsigned char *) (_Dst))[2] = ((unsigned char *) (_Src))[2]; \
+ ((unsigned char *) (_Dst))[3] = ((unsigned char *) (_Src))[3]; \
+ ((unsigned char *) (_Dst))[4] = ((unsigned char *) (_Src))[4]; \
+ ((unsigned char *) (_Dst))[5] = ((unsigned char *) (_Src))[5];
+
+/******************************************************************************/
+/* Constants. */
+/******************************************************************************/
+
+#define ETHERNET_ADDRESS_SIZE 6
+#define ETHERNET_PACKET_HEADER_SIZE 14
+#define MIN_ETHERNET_PACKET_SIZE 64 /* with 4 byte crc. */
+#define MAX_ETHERNET_PACKET_SIZE 1518 /* with 4 byte crc. */
+#define MIN_ETHERNET_PACKET_SIZE_NO_CRC 60
+#define MAX_ETHERNET_PACKET_SIZE_NO_CRC 1514
+#define MAX_ETHERNET_PACKET_BUFFER_SIZE 1536 /* A nice even number. */
+
+#ifndef LM_MAX_MC_TABLE_SIZE
+#define LM_MAX_MC_TABLE_SIZE 32
+#endif /* LM_MAX_MC_TABLE_SIZE */
+#define LM_MC_ENTRY_SIZE (ETHERNET_ADDRESS_SIZE+1)
+#define LM_MC_INSTANCE_COUNT_INDEX (LM_MC_ENTRY_SIZE-1)
+
+/* Receive filter masks. */
+#define LM_ACCEPT_UNICAST 0x0001
+#define LM_ACCEPT_MULTICAST 0x0002
+#define LM_ACCEPT_ALL_MULTICAST 0x0004
+#define LM_ACCEPT_BROADCAST 0x0008
+#define LM_ACCEPT_ERROR_PACKET 0x0010
+
+#define LM_PROMISCUOUS_MODE 0x10000
+
+/******************************************************************************/
+/* PCI registers. */
+/******************************************************************************/
+
+#define PCI_VENDOR_ID_REG 0x00
+#define PCI_DEVICE_ID_REG 0x02
+
+#define PCI_COMMAND_REG 0x04
+#define PCI_IO_SPACE_ENABLE 0x0001
+#define PCI_MEM_SPACE_ENABLE 0x0002
+#define PCI_BUSMASTER_ENABLE 0x0004
+#define PCI_MEMORY_WRITE_INVALIDATE 0x0010
+#define PCI_PARITY_ERROR_ENABLE 0x0040
+#define PCI_SYSTEM_ERROR_ENABLE 0x0100
+#define PCI_FAST_BACK_TO_BACK_ENABLE 0x0200
+
+#define PCI_STATUS_REG 0x06
+#define PCI_REV_ID_REG 0x08
+
+#define PCI_CACHE_LINE_SIZE_REG 0x0c
+
+#define PCI_IO_BASE_ADDR_REG 0x10
+#define PCI_IO_BASE_ADDR_MASK 0xfffffff0
+
+#define PCI_MEM_BASE_ADDR_LOW 0x10
+#define PCI_MEM_BASE_ADDR_HIGH 0x14
+
+#define PCI_SUBSYSTEM_VENDOR_ID_REG 0x2c
+#define PCI_SUBSYSTEM_ID_REG 0x2e
+#define PCI_INT_LINE_REG 0x3c
+
+#define PCIX_CAP_REG 0x40
+#define PCIX_ENABLE_RELAXED_ORDERING BIT_17
+
+/******************************************************************************/
+/* Fragment structure. */
+/******************************************************************************/
+
+typedef struct {
+ LM_UINT32 FragSize;
+ LM_PHYSICAL_ADDRESS FragBuf;
+} LM_FRAG, *PLM_FRAG;
+
+typedef struct {
+ /* FragCount is initialized for the caller to the maximum array size, on */
+ /* return FragCount is the number of the actual fragments in the array. */
+ LM_UINT32 FragCount;
+
+ /* Total buffer size. */
+ LM_UINT32 TotalSize;
+
+ /* Fragment array buffer. */
+ LM_FRAG Fragments[1];
+} LM_FRAG_LIST, *PLM_FRAG_LIST;
+
+#define DECLARE_FRAG_LIST_BUFFER_TYPE(_FRAG_LIST_TYPE_NAME, _MAX_FRAG_COUNT) \
+ typedef struct { \
+ LM_FRAG_LIST FragList; \
+ LM_FRAG FragListBuffer[_MAX_FRAG_COUNT-1]; \
+ } _FRAG_LIST_TYPE_NAME, *P##_FRAG_LIST_TYPE_NAME
+
+/******************************************************************************/
+/* Status codes. */
+/******************************************************************************/
+
+#define LM_STATUS_SUCCESS 0
+#define LM_STATUS_FAILURE 1
+
+#define LM_STATUS_INTERRUPT_ACTIVE 2
+#define LM_STATUS_INTERRUPT_NOT_ACTIVE 3
+
+#define LM_STATUS_LINK_ACTIVE 4
+#define LM_STATUS_LINK_DOWN 5
+#define LM_STATUS_LINK_SETTING_MISMATCH 6
+
+#define LM_STATUS_TOO_MANY_FRAGMENTS 7
+#define LM_STATUS_TRANSMIT_ABORTED 8
+#define LM_STATUS_TRANSMIT_ERROR 9
+#define LM_STATUS_RECEIVE_ABORTED 10
+#define LM_STATUS_RECEIVE_ERROR 11
+#define LM_STATUS_INVALID_PACKET_SIZE 12
+#define LM_STATUS_OUT_OF_MAP_REGISTERS 13
+#define LM_STATUS_UNKNOWN_ADAPTER 14
+
+typedef LM_UINT LM_STATUS, *PLM_STATUS;
+
+/******************************************************************************/
+/* Requested media type. */
+/******************************************************************************/
+
+#define LM_REQUESTED_MEDIA_TYPE_AUTO 0
+#define LM_REQUESTED_MEDIA_TYPE_BNC 1
+#define LM_REQUESTED_MEDIA_TYPE_UTP_AUTO 2
+#define LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS 3
+#define LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX 4
+#define LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS 5
+#define LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX 6
+#define LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS 7
+#define LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX 8
+#define LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS 9
+#define LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS_FULL_DUPLEX 10
+#define LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS 11
+#define LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX 12
+#define LM_REQUESTED_MEDIA_TYPE_MAC_LOOPBACK 0xfffe
+#define LM_REQUESTED_MEDIA_TYPE_PHY_LOOPBACK 0xffff
+
+typedef LM_UINT32 LM_REQUESTED_MEDIA_TYPE, *PLM_REQUESTED_MEDIA_TYPE;
+
+/******************************************************************************/
+/* Media type. */
+/******************************************************************************/
+
+#define LM_MEDIA_TYPE_UNKNOWN -1
+#define LM_MEDIA_TYPE_AUTO 0
+#define LM_MEDIA_TYPE_UTP 1
+#define LM_MEDIA_TYPE_BNC 2
+#define LM_MEDIA_TYPE_AUI 3
+#define LM_MEDIA_TYPE_FIBER 4
+
+typedef LM_UINT32 LM_MEDIA_TYPE, *PLM_MEDIA_TYPE;
+
+/******************************************************************************/
+/* Line speed. */
+/******************************************************************************/
+
+#define LM_LINE_SPEED_UNKNOWN 0
+#define LM_LINE_SPEED_10MBPS 1
+#define LM_LINE_SPEED_100MBPS 2
+#define LM_LINE_SPEED_1000MBPS 3
+
+typedef LM_UINT32 LM_LINE_SPEED, *PLM_LINE_SPEED;
+
+/******************************************************************************/
+/* Duplex mode. */
+/******************************************************************************/
+
+#define LM_DUPLEX_MODE_UNKNOWN 0
+#define LM_DUPLEX_MODE_HALF 1
+#define LM_DUPLEX_MODE_FULL 2
+
+typedef LM_UINT32 LM_DUPLEX_MODE, *PLM_DUPLEX_MODE;
+
+/******************************************************************************/
+/* Power state. */
+/******************************************************************************/
+
+#define LM_POWER_STATE_D0 0
+#define LM_POWER_STATE_D1 1
+#define LM_POWER_STATE_D2 2
+#define LM_POWER_STATE_D3 3
+
+typedef LM_UINT32 LM_POWER_STATE, *PLM_POWER_STATE;
+
+/******************************************************************************/
+/* Task offloading. */
+/******************************************************************************/
+
+#define LM_TASK_OFFLOAD_NONE 0x0000
+#define LM_TASK_OFFLOAD_TX_IP_CHECKSUM 0x0001
+#define LM_TASK_OFFLOAD_RX_IP_CHECKSUM 0x0002
+#define LM_TASK_OFFLOAD_TX_TCP_CHECKSUM 0x0004
+#define LM_TASK_OFFLOAD_RX_TCP_CHECKSUM 0x0008
+#define LM_TASK_OFFLOAD_TX_UDP_CHECKSUM 0x0010
+#define LM_TASK_OFFLOAD_RX_UDP_CHECKSUM 0x0020
+#define LM_TASK_OFFLOAD_TCP_SEGMENTATION 0x0040
+
+typedef LM_UINT32 LM_TASK_OFFLOAD, *PLM_TASK_OFFLOAD;
+
+/******************************************************************************/
+/* Flow control. */
+/******************************************************************************/
+
+#define LM_FLOW_CONTROL_NONE 0x00
+#define LM_FLOW_CONTROL_RECEIVE_PAUSE 0x01
+#define LM_FLOW_CONTROL_TRANSMIT_PAUSE 0x02
+#define LM_FLOW_CONTROL_RX_TX_PAUSE (LM_FLOW_CONTROL_RECEIVE_PAUSE | \
+ LM_FLOW_CONTROL_TRANSMIT_PAUSE)
+
+/* This value can be or-ed with RECEIVE_PAUSE and TRANSMIT_PAUSE. If the */
+/* auto-negotiation is disabled and the RECEIVE_PAUSE and TRANSMIT_PAUSE */
+/* bits are set, then flow control is enabled regardless of link partner's */
+/* flow control capability. */
+#define LM_FLOW_CONTROL_AUTO_PAUSE 0x80000000
+
+typedef LM_UINT32 LM_FLOW_CONTROL, *PLM_FLOW_CONTROL;
+
+/******************************************************************************/
+/* Wake up mode. */
+/******************************************************************************/
+
+#define LM_WAKE_UP_MODE_NONE 0
+#define LM_WAKE_UP_MODE_MAGIC_PACKET 1
+#define LM_WAKE_UP_MODE_NWUF 2
+#define LM_WAKE_UP_MODE_LINK_CHANGE 4
+
+typedef LM_UINT32 LM_WAKE_UP_MODE, *PLM_WAKE_UP_MODE;
+
+/******************************************************************************/
+/* Counters. */
+/******************************************************************************/
+
+#define LM_COUNTER_FRAMES_XMITTED_OK 0
+#define LM_COUNTER_FRAMES_RECEIVED_OK 1
+#define LM_COUNTER_ERRORED_TRANSMIT_COUNT 2
+#define LM_COUNTER_ERRORED_RECEIVE_COUNT 3
+#define LM_COUNTER_RCV_CRC_ERROR 4
+#define LM_COUNTER_ALIGNMENT_ERROR 5
+#define LM_COUNTER_SINGLE_COLLISION_FRAMES 6
+#define LM_COUNTER_MULTIPLE_COLLISION_FRAMES 7
+#define LM_COUNTER_FRAMES_DEFERRED 8
+#define LM_COUNTER_MAX_COLLISIONS 9
+#define LM_COUNTER_RCV_OVERRUN 10
+#define LM_COUNTER_XMIT_UNDERRUN 11
+#define LM_COUNTER_UNICAST_FRAMES_XMIT 12
+#define LM_COUNTER_MULTICAST_FRAMES_XMIT 13
+#define LM_COUNTER_BROADCAST_FRAMES_XMIT 14
+#define LM_COUNTER_UNICAST_FRAMES_RCV 15
+#define LM_COUNTER_MULTICAST_FRAMES_RCV 16
+#define LM_COUNTER_BROADCAST_FRAMES_RCV 17
+
+typedef LM_UINT32 LM_COUNTER_TYPE, *PLM_COUNTER_TYPE;
+
+/******************************************************************************/
+/* Forward definition. */
+/******************************************************************************/
+
+typedef struct _LM_DEVICE_BLOCK *PLM_DEVICE_BLOCK;
+typedef struct _LM_PACKET *PLM_PACKET;
+
+/******************************************************************************/
+/* Function prototypes. */
+/******************************************************************************/
+
+LM_STATUS LM_GetAdapterInfo (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_InitializeAdapter (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_ResetAdapter (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_DisableInterrupt (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_EnableInterrupt (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_SendPacket (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
+LM_STATUS LM_ServiceInterrupts (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_QueueRxPackets (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_SetReceiveMask (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Mask);
+LM_STATUS LM_Halt (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_Abort (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_MulticastAdd (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress);
+LM_STATUS LM_MulticastDel (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress);
+LM_STATUS LM_MulticastClear (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_SetMacAddress (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMacAddress);
+LM_STATUS LM_LoopbackAddress (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pAddress);
+
+LM_UINT32 LM_GetCrcCounter (PLM_DEVICE_BLOCK pDevice);
+
+LM_WAKE_UP_MODE LM_PMCapabilities (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_NwufAdd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize,
+ LM_UINT8 * pByteMask, LM_UINT8 * pPattern);
+LM_STATUS LM_NwufRemove (PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize,
+ LM_UINT8 * pByteMask, LM_UINT8 * pPattern);
+LM_STATUS LM_SetPowerState (PLM_DEVICE_BLOCK pDevice,
+ LM_POWER_STATE PowerLevel);
+
+LM_VOID LM_ReadPhy (PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg,
+ PLM_UINT32 pData32);
+LM_VOID LM_WritePhy (PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg,
+ LM_UINT32 Data32);
+
+LM_STATUS LM_ControlLoopBack (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Control);
+LM_STATUS LM_SetupPhy (PLM_DEVICE_BLOCK pDevice);
+int LM_BlinkLED (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDuration);
+
+/******************************************************************************/
+/* These are the OS specific functions called by LMAC. */
+/******************************************************************************/
+
+LM_STATUS MM_ReadConfig16 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
+ LM_UINT16 * pValue16);
+LM_STATUS MM_WriteConfig16 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
+ LM_UINT16 Value16);
+LM_STATUS MM_ReadConfig32 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
+ LM_UINT32 * pValue32);
+LM_STATUS MM_WriteConfig32 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
+ LM_UINT32 Value32);
+LM_STATUS MM_MapMemBase (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS MM_MapIoBase (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS MM_IndicateRxPackets (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS MM_IndicateTxPackets (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS MM_StartTxDma (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
+LM_STATUS MM_CompleteTxDma (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
+LM_STATUS MM_AllocateMemory (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
+ PLM_VOID * pMemoryBlockVirt);
+LM_STATUS MM_AllocateSharedMemory (PLM_DEVICE_BLOCK pDevice,
+ LM_UINT32 BlockSize,
+ PLM_VOID * pMemoryBlockVirt,
+ PLM_PHYSICAL_ADDRESS pMemoryBlockPhy,
+ LM_BOOL Cached);
+LM_STATUS MM_GetConfig (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS MM_IndicateStatus (PLM_DEVICE_BLOCK pDevice, LM_STATUS Status);
+LM_STATUS MM_InitializeUmPackets (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS MM_FreeRxBuffer (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
+LM_STATUS MM_CoalesceTxBuffer (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
+LM_STATUS LM_MbufWorkAround (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_SetLinkSpeed (PLM_DEVICE_BLOCK pDevice,
+ LM_REQUESTED_MEDIA_TYPE RequestedMediaType);
+
+#if INCLUDE_5703_A0_FIX
+LM_STATUS LM_Load5703DmaWFirmware (PLM_DEVICE_BLOCK pDevice);
+#endif
+
+#endif /* LM_H */
diff --git a/drivers/net/bcm570x_mm.h b/drivers/net/bcm570x_mm.h
new file mode 100644
index 0000000..ff5302f
--- /dev/null
+++ b/drivers/net/bcm570x_mm.h
@@ -0,0 +1,158 @@
+
+/******************************************************************************/
+/* */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */
+/* Corporation. */
+/* All rights reserved. */
+/* */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation, located in the file LICENSE. */
+/* */
+/******************************************************************************/
+
+#ifndef MM_H
+#define MM_H
+
+#define __raw_readl readl
+#define __raw_writel writel
+
+#define BIG_ENDIAN_HOST 1
+#define readl(addr) (*(volatile unsigned int*)(addr))
+#define writel(b,addr) ((*(volatile unsigned int *) (addr)) = (b))
+
+/* Define memory barrier function here if needed */
+#define wmb()
+#define membar()
+#include <common.h>
+#include <asm/types.h>
+#include "bcm570x_lm.h"
+#include "bcm570x_queue.h"
+#include "tigon3.h"
+#include <pci.h>
+
+#define FALSE 0
+#define TRUE 1
+#define ERROR -1
+
+#if DBG
+#define STATIC
+#else
+#define STATIC static
+#endif
+
+extern int MM_Packet_Desc_Size;
+
+#define MM_PACKET_DESC_SIZE MM_Packet_Desc_Size
+
+DECLARE_QUEUE_TYPE (UM_RX_PACKET_Q, MAX_RX_PACKET_DESC_COUNT + 1);
+
+#define MAX_MEM 16
+
+/* Synch */
+typedef int mutex_t;
+typedef int spinlock_t;
+
+/* Embedded device control */
+typedef struct _UM_DEVICE_BLOCK {
+ LM_DEVICE_BLOCK lm_dev;
+ pci_dev_t pdev;
+ char *name;
+ void *mem_list[MAX_MEM];
+ dma_addr_t dma_list[MAX_MEM];
+ int mem_size_list[MAX_MEM];
+ int mem_list_num;
+ int mtu;
+ int index;
+ int opened;
+ int delayed_link_ind; /* Delay link status during initial load */
+ int adapter_just_inited; /* the first few seconds after init. */
+ int spurious_int; /* new -- unsupported */
+ int timer_interval;
+ int adaptive_expiry;
+ int crc_counter_expiry; /* new -- unsupported */
+ int poll_tib_expiry; /* new -- unsupported */
+ int tx_full;
+ int tx_queued;
+ int line_speed; /* in Mbps, 0 if link is down */
+ UM_RX_PACKET_Q rx_out_of_buf_q;
+ int rx_out_of_buf;
+ int rx_low_buf_thresh; /* changed to rx_buf_repl_thresh */
+ int rx_buf_repl_panic_thresh;
+ int rx_buf_align; /* new -- unsupported */
+ int do_global_lock;
+ mutex_t global_lock;
+ mutex_t undi_lock;
+ long undi_flags;
+ volatile int interrupt;
+ int tasklet_pending;
+ int tasklet_busy; /* new -- unsupported */
+ int rx_pkt;
+ int tx_pkt;
+#ifdef NICE_SUPPORT /* unsupported, this is a linux ioctl */
+ void (*nice_rx) (void *, void *);
+ void *nice_ctx;
+#endif /* NICE_SUPPORT */
+ int rx_adaptive_coalesce;
+ unsigned int rx_last_cnt;
+ unsigned int tx_last_cnt;
+ unsigned int rx_curr_coalesce_frames;
+ unsigned int rx_curr_coalesce_ticks;
+ unsigned int tx_curr_coalesce_frames; /* new -- unsupported */
+#if TIGON3_DEBUG /* new -- unsupported */
+ uint tx_zc_count;
+ uint tx_chksum_count;
+ uint tx_himem_count;
+ uint rx_good_chksum_count;
+#endif
+ unsigned int rx_bad_chksum_count; /* new -- unsupported */
+ unsigned int rx_misc_errors; /* new -- unsupported */
+} UM_DEVICE_BLOCK, *PUM_DEVICE_BLOCK;
+
+/* Physical/PCI DMA address */
+typedef union {
+ dma_addr_t dma_map;
+} dma_map_t;
+
+/* Packet */
+typedef struct
+ _UM_PACKET {
+ LM_PACKET lm_packet;
+ void *skbuff; /* Address of packet buffer */
+} UM_PACKET, *PUM_PACKET;
+
+#define MM_ACQUIRE_UNDI_LOCK(_pDevice)
+#define MM_RELEASE_UNDI_LOCK(_pDevice)
+#define MM_ACQUIRE_INT_LOCK(_pDevice)
+#define MM_RELEASE_INT_LOCK(_pDevice)
+#define MM_UINT_PTR(_ptr) ((unsigned long) (_ptr))
+
+/* Macro for setting 64bit address struct */
+#define set_64bit_addr(paddr, low, high) \
+ (paddr)->Low = low; \
+ (paddr)->High = high;
+
+/* Assume that PCI controller's view of host memory is same as host */
+
+#define MEM_TO_PCI_PHYS(addr) (addr)
+
+extern void MM_SetAddr (LM_PHYSICAL_ADDRESS * paddr, dma_addr_t addr);
+extern void MM_SetT3Addr (T3_64BIT_HOST_ADDR * paddr, dma_addr_t addr);
+extern void MM_MapTxDma (PLM_DEVICE_BLOCK pDevice,
+ struct _LM_PACKET *pPacket, T3_64BIT_HOST_ADDR * paddr,
+ LM_UINT32 * len, int frag);
+extern void MM_MapRxDma (PLM_DEVICE_BLOCK pDevice,
+ struct _LM_PACKET *pPacket,
+ T3_64BIT_HOST_ADDR * paddr);
+
+/* BSP needs to provide sysUsecDelay and sysSerialPrintString */
+extern void sysSerialPrintString (char *s);
+#define MM_Wait(usec) udelay(usec)
+
+/* Define memory barrier function here if needed */
+#define wmb()
+
+#if 0
+#define cpu_to_le32(val) LONGSWAP(val)
+#endif
+#endif /* MM_H */
diff --git a/drivers/net/bcm570x_queue.h b/drivers/net/bcm570x_queue.h
new file mode 100644
index 0000000..336b3ca
--- /dev/null
+++ b/drivers/net/bcm570x_queue.h
@@ -0,0 +1,387 @@
+
+/******************************************************************************/
+/* */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */
+/* Corporation. */
+/* All rights reserved. */
+/* */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation, located in the file LICENSE. */
+/* */
+/* Queue functions. */
+/* void QQ_InitQueue(PQQ_CONTAINER pQueue) */
+/* char QQ_Full(PQQ_CONTAINER pQueue) */
+/* char QQ_Empty(PQQ_CONTAINER pQueue) */
+/* unsigned int QQ_GetSize(PQQ_CONTAINER pQueue) */
+/* unsigned int QQ_GetEntryCnt(PQQ_CONTAINER pQueue) */
+/* char QQ_PushHead(PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry) */
+/* char QQ_PushTail(PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry) */
+/* PQQ_ENTRY QQ_PopHead(PQQ_CONTAINER pQueue) */
+/* PQQ_ENTRY QQ_PopTail(PQQ_CONTAINER pQueue) */
+/* PQQ_ENTRY QQ_GetHead(PQQ_CONTAINER pQueue, unsigned int Idx) */
+/* PQQ_ENTRY QQ_GetTail(PQQ_CONTAINER pQueue, unsigned int Idx) */
+/* */
+/* */
+/* History: */
+/* 02/25/00 Hav Khauv Initial version. */
+/******************************************************************************/
+
+#ifndef BCM_QUEUE_H
+#define BCM_QUEUE_H
+#ifndef EMBEDDED
+#define EMBEDDED 1
+#endif
+
+/******************************************************************************/
+/* Queue definitions. */
+/******************************************************************************/
+
+/* Entry for queueing. */
+typedef void *PQQ_ENTRY;
+
+/* Linux Atomic Ops support */
+typedef struct { int counter; } atomic_t;
+
+
+/*
+ * This combination of `inline' and `extern' has almost the effect of a
+ * macro. The way to use it is to put a function definition in a header
+ * file with these keywords, and put another copy of the definition
+ * (lacking `inline' and `extern') in a library file. The definition in
+ * the header file will cause most calls to the function to be inlined.
+ * If any uses of the function remain, they will refer to the single copy
+ * in the library.
+ */
+extern __inline void
+atomic_set(atomic_t* entry, int val)
+{
+ entry->counter = val;
+}
+extern __inline int
+atomic_read(atomic_t* entry)
+{
+ return entry->counter;
+}
+extern __inline void
+atomic_inc(atomic_t* entry)
+{
+ if(entry)
+ entry->counter++;
+}
+
+extern __inline void
+atomic_dec(atomic_t* entry)
+{
+ if(entry)
+ entry->counter--;
+}
+
+extern __inline void
+atomic_sub(int a, atomic_t* entry)
+{
+ if(entry)
+ entry->counter -= a;
+}
+extern __inline void
+atomic_add(int a, atomic_t* entry)
+{
+ if(entry)
+ entry->counter += a;
+}
+
+
+/* Queue header -- base type. */
+typedef struct {
+ unsigned int Head;
+ unsigned int Tail;
+ unsigned int Size;
+ atomic_t EntryCnt;
+ PQQ_ENTRY Array[1];
+} QQ_CONTAINER, *PQQ_CONTAINER;
+
+
+/* Declare queue type macro. */
+#define DECLARE_QUEUE_TYPE(_QUEUE_TYPE, _QUEUE_SIZE) \
+ \
+ typedef struct { \
+ QQ_CONTAINER Container; \
+ PQQ_ENTRY EntryBuffer[_QUEUE_SIZE]; \
+ } _QUEUE_TYPE, *P##_QUEUE_TYPE
+
+
+/******************************************************************************/
+/* Compilation switches. */
+/******************************************************************************/
+
+#if DBG
+#undef QQ_NO_OVERFLOW_CHECK
+#undef QQ_NO_UNDERFLOW_CHECK
+#endif /* DBG */
+
+#ifdef QQ_USE_MACROS
+/* notdone */
+#else
+
+#ifdef QQ_NO_INLINE
+#define __inline
+#endif /* QQ_NO_INLINE */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+extern __inline void
+QQ_InitQueue(
+PQQ_CONTAINER pQueue,
+unsigned int QueueSize) {
+ pQueue->Head = 0;
+ pQueue->Tail = 0;
+ pQueue->Size = QueueSize+1;
+ atomic_set(&pQueue->EntryCnt, 0);
+} /* QQ_InitQueue */
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+extern __inline char
+QQ_Full(
+PQQ_CONTAINER pQueue) {
+ unsigned int NewHead;
+
+ NewHead = (pQueue->Head + 1) % pQueue->Size;
+
+ return(NewHead == pQueue->Tail);
+} /* QQ_Full */
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+extern __inline char
+QQ_Empty(
+PQQ_CONTAINER pQueue) {
+ return(pQueue->Head == pQueue->Tail);
+} /* QQ_Empty */
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+extern __inline unsigned int
+QQ_GetSize(
+PQQ_CONTAINER pQueue) {
+ return pQueue->Size;
+} /* QQ_GetSize */
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+extern __inline unsigned int
+QQ_GetEntryCnt(
+PQQ_CONTAINER pQueue) {
+ return atomic_read(&pQueue->EntryCnt);
+} /* QQ_GetEntryCnt */
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/* TRUE entry was added successfully. */
+/* FALSE queue is full. */
+/******************************************************************************/
+extern __inline char
+QQ_PushHead(
+PQQ_CONTAINER pQueue,
+PQQ_ENTRY pEntry) {
+ unsigned int Head;
+
+ Head = (pQueue->Head + 1) % pQueue->Size;
+
+#if !defined(QQ_NO_OVERFLOW_CHECK)
+ if(Head == pQueue->Tail) {
+ return 0;
+ } /* if */
+#endif /* QQ_NO_OVERFLOW_CHECK */
+
+ pQueue->Array[pQueue->Head] = pEntry;
+ wmb();
+ pQueue->Head = Head;
+ atomic_inc(&pQueue->EntryCnt);
+
+ return -1;
+} /* QQ_PushHead */
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/* TRUE entry was added successfully. */
+/* FALSE queue is full. */
+/******************************************************************************/
+extern __inline char
+QQ_PushTail(
+PQQ_CONTAINER pQueue,
+PQQ_ENTRY pEntry) {
+ unsigned int Tail;
+
+ Tail = pQueue->Tail;
+ if(Tail == 0) {
+ Tail = pQueue->Size;
+ } /* if */
+ Tail--;
+
+#if !defined(QQ_NO_OVERFLOW_CHECK)
+ if(Tail == pQueue->Head) {
+ return 0;
+ } /* if */
+#endif /* QQ_NO_OVERFLOW_CHECK */
+
+ pQueue->Array[Tail] = pEntry;
+ wmb();
+ pQueue->Tail = Tail;
+ atomic_inc(&pQueue->EntryCnt);
+
+ return -1;
+} /* QQ_PushTail */
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+extern __inline PQQ_ENTRY
+QQ_PopHead(
+PQQ_CONTAINER pQueue) {
+ unsigned int Head;
+ PQQ_ENTRY Entry;
+
+ Head = pQueue->Head;
+
+#if !defined(QQ_NO_UNDERFLOW_CHECK)
+ if(Head == pQueue->Tail) {
+ return (PQQ_ENTRY) 0;
+ } /* if */
+#endif /* QQ_NO_UNDERFLOW_CHECK */
+
+ if(Head == 0) {
+ Head = pQueue->Size;
+ } /* if */
+ Head--;
+
+ Entry = pQueue->Array[Head];
+#ifdef EMBEDDED
+ membar();
+#else
+ mb();
+#endif
+ pQueue->Head = Head;
+ atomic_dec(&pQueue->EntryCnt);
+
+ return Entry;
+} /* QQ_PopHead */
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+extern __inline PQQ_ENTRY
+QQ_PopTail(
+PQQ_CONTAINER pQueue) {
+ unsigned int Tail;
+ PQQ_ENTRY Entry;
+
+ Tail = pQueue->Tail;
+
+#if !defined(QQ_NO_UNDERFLOW_CHECK)
+ if(Tail == pQueue->Head) {
+ return (PQQ_ENTRY) 0;
+ } /* if */
+#endif /* QQ_NO_UNDERFLOW_CHECK */
+
+ Entry = pQueue->Array[Tail];
+#ifdef EMBEDDED
+ membar();
+#else
+ mb();
+#endif
+ pQueue->Tail = (Tail + 1) % pQueue->Size;
+ atomic_dec(&pQueue->EntryCnt);
+
+ return Entry;
+} /* QQ_PopTail */
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+extern __inline PQQ_ENTRY
+QQ_GetHead(
+ PQQ_CONTAINER pQueue,
+ unsigned int Idx)
+{
+ if(Idx >= atomic_read(&pQueue->EntryCnt))
+ {
+ return (PQQ_ENTRY) 0;
+ }
+
+ if(pQueue->Head > Idx)
+ {
+ Idx = pQueue->Head - Idx;
+ }
+ else
+ {
+ Idx = pQueue->Size - (Idx - pQueue->Head);
+ }
+ Idx--;
+
+ return pQueue->Array[Idx];
+}
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+extern __inline PQQ_ENTRY
+QQ_GetTail(
+ PQQ_CONTAINER pQueue,
+ unsigned int Idx)
+{
+ if(Idx >= atomic_read(&pQueue->EntryCnt))
+ {
+ return (PQQ_ENTRY) 0;
+ }
+
+ Idx += pQueue->Tail;
+ if(Idx >= pQueue->Size)
+ {
+ Idx = Idx - pQueue->Size;
+ }
+
+ return pQueue->Array[Idx];
+}
+
+#endif /* QQ_USE_MACROS */
+
+
+#endif /* QUEUE_H */
diff --git a/drivers/net/cs8900.c b/drivers/net/cs8900.c
new file mode 100644
index 0000000..80c4ba2
--- /dev/null
+++ b/drivers/net/cs8900.c
@@ -0,0 +1,322 @@
+/*
+ * Cirrus Logic CS8900A Ethernet
+ *
+ * (C) 2003 Wolfgang Denk, wd@denx.de
+ * Extension to synchronize ethaddr environment variable
+ * against value in EEPROM
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Copyright (C) 1999 Ben Williamson <benw@pobox.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is loaded into SRAM in bootstrap mode, where it waits
+ * for commands on UART1 to read and write memory, jump to code etc.
+ * A design goal for this program is to be entirely independent of the
+ * target board. Anything with a CL-PS7111 or EP7211 should be able to run
+ * this code in bootstrap mode. All the board specifics can be handled on
+ * the host.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <command.h>
+#include "cs8900.h"
+#include <net.h>
+
+#ifdef CONFIG_DRIVER_CS8900
+
+#if defined(CONFIG_CMD_NET)
+
+#undef DEBUG
+
+/* packet page register access functions */
+
+#ifdef CS8900_BUS32
+/* we don't need 16 bit initialisation on 32 bit bus */
+#define get_reg_init_bus(x) get_reg((x))
+#else
+static unsigned short get_reg_init_bus (int regno)
+{
+ /* force 16 bit busmode */
+ volatile unsigned char c;
+
+ c = CS8900_BUS16_0;
+ c = CS8900_BUS16_1;
+ c = CS8900_BUS16_0;
+ c = CS8900_BUS16_1;
+ c = CS8900_BUS16_0;
+
+ CS8900_PPTR = regno;
+ return (unsigned short) CS8900_PDATA;
+}
+#endif
+
+static unsigned short get_reg (int regno)
+{
+ CS8900_PPTR = regno;
+ return (unsigned short) CS8900_PDATA;
+}
+
+
+static void put_reg (int regno, unsigned short val)
+{
+ CS8900_PPTR = regno;
+ CS8900_PDATA = val;
+}
+
+static void eth_reset (void)
+{
+ int tmo;
+ unsigned short us;
+
+ /* reset NIC */
+ put_reg (PP_SelfCTL, get_reg (PP_SelfCTL) | PP_SelfCTL_Reset);
+
+ /* wait for 200ms */
+ udelay (200000);
+ /* Wait until the chip is reset */
+
+ tmo = get_timer (0) + 1 * CFG_HZ;
+ while ((((us = get_reg_init_bus (PP_SelfSTAT)) & PP_SelfSTAT_InitD) == 0)
+ && tmo < get_timer (0))
+ /*NOP*/;
+}
+
+static void eth_reginit (void)
+{
+ /* receive only error free packets addressed to this card */
+ put_reg (PP_RxCTL, PP_RxCTL_IA | PP_RxCTL_Broadcast | PP_RxCTL_RxOK);
+ /* do not generate any interrupts on receive operations */
+ put_reg (PP_RxCFG, 0);
+ /* do not generate any interrupts on transmit operations */
+ put_reg (PP_TxCFG, 0);
+ /* do not generate any interrupts on buffer operations */
+ put_reg (PP_BufCFG, 0);
+ /* enable transmitter/receiver mode */
+ put_reg (PP_LineCTL, PP_LineCTL_Rx | PP_LineCTL_Tx);
+}
+
+void cs8900_get_enetaddr (uchar * addr)
+{
+ int i;
+ unsigned char env_enetaddr[6];
+ char *tmp = getenv ("ethaddr");
+ char *end;
+
+ for (i=0; i<6; i++) {
+ env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
+ if (tmp)
+ tmp = (*end) ? end+1 : end;
+ }
+
+ /* verify chip id */
+ if (get_reg_init_bus (PP_ChipID) != 0x630e)
+ return;
+ eth_reset ();
+ if ((get_reg (PP_SelfST) & (PP_SelfSTAT_EEPROM | PP_SelfSTAT_EEPROM_OK)) ==
+ (PP_SelfSTAT_EEPROM | PP_SelfSTAT_EEPROM_OK)) {
+
+ /* Load the MAC from EEPROM */
+ for (i = 0; i < 6 / 2; i++) {
+ unsigned int Addr;
+
+ Addr = get_reg (PP_IA + i * 2);
+ addr[i * 2] = Addr & 0xFF;
+ addr[i * 2 + 1] = Addr >> 8;
+ }
+
+ if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
+ memcmp(env_enetaddr, addr, 6) != 0) {
+ printf ("\nWarning: MAC addresses don't match:\n");
+ printf ("\tHW MAC address: "
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ addr[0], addr[1],
+ addr[2], addr[3],
+ addr[4], addr[5] );
+ printf ("\t\"ethaddr\" value: "
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ env_enetaddr[0], env_enetaddr[1],
+ env_enetaddr[2], env_enetaddr[3],
+ env_enetaddr[4], env_enetaddr[5]) ;
+ debug ("### Set MAC addr from environment\n");
+ memcpy (addr, env_enetaddr, 6);
+ }
+ if (!tmp) {
+ char ethaddr[20];
+ sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+ addr[0], addr[1],
+ addr[2], addr[3],
+ addr[4], addr[5]) ;
+ debug ("### Set environment from HW MAC addr = \"%s\"\n", ethaddr);
+ setenv ("ethaddr", ethaddr);
+ }
+
+ }
+}
+
+void eth_halt (void)
+{
+ /* disable transmitter/receiver mode */
+ put_reg (PP_LineCTL, 0);
+
+ /* "shutdown" to show ChipID or kernel wouldn't find he cs8900 ... */
+ get_reg_init_bus (PP_ChipID);
+}
+
+int eth_init (bd_t * bd)
+{
+
+ /* verify chip id */
+ if (get_reg_init_bus (PP_ChipID) != 0x630e) {
+ printf ("CS8900 Ethernet chip not found?!\n");
+ return 0;
+ }
+
+ eth_reset ();
+ /* set the ethernet address */
+ put_reg (PP_IA + 0, bd->bi_enetaddr[0] | (bd->bi_enetaddr[1] << 8));
+ put_reg (PP_IA + 2, bd->bi_enetaddr[2] | (bd->bi_enetaddr[3] << 8));
+ put_reg (PP_IA + 4, bd->bi_enetaddr[4] | (bd->bi_enetaddr[5] << 8));
+
+ eth_reginit ();
+ return 0;
+}
+
+/* Get a data block via Ethernet */
+extern int eth_rx (void)
+{
+ int i;
+ unsigned short rxlen;
+ unsigned short *addr;
+ unsigned short status;
+
+ status = get_reg (PP_RER);
+
+ if ((status & PP_RER_RxOK) == 0)
+ return 0;
+
+ status = CS8900_RTDATA; /* stat */
+ rxlen = CS8900_RTDATA; /* len */
+
+#ifdef DEBUG
+ if (rxlen > PKTSIZE_ALIGN + PKTALIGN)
+ printf ("packet too big!\n");
+#endif
+ for (addr = (unsigned short *) NetRxPackets[0], i = rxlen >> 1; i > 0;
+ i--)
+ *addr++ = CS8900_RTDATA;
+ if (rxlen & 1)
+ *addr++ = CS8900_RTDATA;
+
+ /* Pass the packet up to the protocol layers. */
+ NetReceive (NetRxPackets[0], rxlen);
+
+ return rxlen;
+}
+
+/* Send a data block via Ethernet. */
+extern int eth_send (volatile void *packet, int length)
+{
+ volatile unsigned short *addr;
+ int tmo;
+ unsigned short s;
+
+retry:
+ /* initiate a transmit sequence */
+ CS8900_TxCMD = PP_TxCmd_TxStart_Full;
+ CS8900_TxLEN = length;
+
+ /* Test to see if the chip has allocated memory for the packet */
+ if ((get_reg (PP_BusSTAT) & PP_BusSTAT_TxRDY) == 0) {
+ /* Oops... this should not happen! */
+#ifdef DEBUG
+ printf ("cs: unable to send packet; retrying...\n");
+#endif
+ for (tmo = get_timer (0) + 5 * CFG_HZ; get_timer (0) < tmo;)
+ /*NOP*/;
+ eth_reset ();
+ eth_reginit ();
+ goto retry;
+ }
+
+ /* Write the contents of the packet */
+ /* assume even number of bytes */
+ for (addr = packet; length > 0; length -= 2)
+ CS8900_RTDATA = *addr++;
+
+ /* wait for transfer to succeed */
+ tmo = get_timer (0) + 5 * CFG_HZ;
+ while ((s = get_reg (PP_TER) & ~0x1F) == 0) {
+ if (get_timer (0) >= tmo)
+ break;
+ }
+
+ /* nothing */ ;
+ if ((s & (PP_TER_CRS | PP_TER_TxOK)) != PP_TER_TxOK) {
+#ifdef DEBUG
+ printf ("\ntransmission error %#x\n", s);
+#endif
+ }
+
+ return 0;
+}
+
+static void cs8900_e2prom_ready(void)
+{
+ while(get_reg(PP_SelfST) & SI_BUSY);
+}
+
+/***********************************************************/
+/* read a 16-bit word out of the EEPROM */
+/***********************************************************/
+
+int cs8900_e2prom_read(unsigned char addr, unsigned short *value)
+{
+ cs8900_e2prom_ready();
+ put_reg(PP_EECMD, EEPROM_READ_CMD | addr);
+ cs8900_e2prom_ready();
+ *value = get_reg(PP_EEData);
+
+ return 0;
+}
+
+
+/***********************************************************/
+/* write a 16-bit word into the EEPROM */
+/***********************************************************/
+
+int cs8900_e2prom_write(unsigned char addr, unsigned short value)
+{
+ cs8900_e2prom_ready();
+ put_reg(PP_EECMD, EEPROM_WRITE_EN);
+ cs8900_e2prom_ready();
+ put_reg(PP_EEData, value);
+ put_reg(PP_EECMD, EEPROM_WRITE_CMD | addr);
+ cs8900_e2prom_ready();
+ put_reg(PP_EECMD, EEPROM_WRITE_DIS);
+ cs8900_e2prom_ready();
+
+ return 0;
+}
+
+#endif /* COMMANDS & CFG_NET */
+
+#endif /* CONFIG_DRIVER_CS8900 */
diff --git a/drivers/net/cs8900.h b/drivers/net/cs8900.h
new file mode 100644
index 0000000..f886d10
--- /dev/null
+++ b/drivers/net/cs8900.h
@@ -0,0 +1,258 @@
+/*
+ * Cirrus Logic CS8900A Ethernet
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Copyright (C) 1999 Ben Williamson <benw@pobox.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is loaded into SRAM in bootstrap mode, where it waits
+ * for commands on UART1 to read and write memory, jump to code etc.
+ * A design goal for this program is to be entirely independent of the
+ * target board. Anything with a CL-PS7111 or EP7211 should be able to run
+ * this code in bootstrap mode. All the board specifics can be handled on
+ * the host.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/types.h>
+#include <config.h>
+
+#ifdef CONFIG_DRIVER_CS8900
+
+/* although the registers are 16 bit, they are 32-bit aligned on the
+ EDB7111. so we have to read them as 32-bit registers and ignore the
+ upper 16-bits. i'm not sure if this holds for the EDB7211. */
+
+#ifdef CS8900_BUS16
+ /* 16 bit aligned registers, 16 bit wide */
+ #define CS8900_REG u16
+ #define CS8900_OFF 0x02
+ #define CS8900_BUS16_0 *(volatile u8 *)(CS8900_BASE+0x00)
+ #define CS8900_BUS16_1 *(volatile u8 *)(CS8900_BASE+0x01)
+#elif defined(CS8900_BUS32)
+ /* 32 bit aligned registers, 16 bit wide (we ignore upper 16 bits) */
+ #define CS8900_REG u32
+ #define CS8900_OFF 0x04
+#else
+ #error unknown bussize ...
+#endif
+
+#define CS8900_RTDATA *(volatile CS8900_REG *)(CS8900_BASE+0x00*CS8900_OFF)
+#define CS8900_TxCMD *(volatile CS8900_REG *)(CS8900_BASE+0x02*CS8900_OFF)
+#define CS8900_TxLEN *(volatile CS8900_REG *)(CS8900_BASE+0x03*CS8900_OFF)
+#define CS8900_ISQ *(volatile CS8900_REG *)(CS8900_BASE+0x04*CS8900_OFF)
+#define CS8900_PPTR *(volatile CS8900_REG *)(CS8900_BASE+0x05*CS8900_OFF)
+#define CS8900_PDATA *(volatile CS8900_REG *)(CS8900_BASE+0x06*CS8900_OFF)
+
+
+#define ISQ_RxEvent 0x04
+#define ISQ_TxEvent 0x08
+#define ISQ_BufEvent 0x0C
+#define ISQ_RxMissEvent 0x10
+#define ISQ_TxColEvent 0x12
+#define ISQ_EventMask 0x3F
+
+/* packet page register offsets */
+
+/* bus interface registers */
+#define PP_ChipID 0x0000 /* Chip identifier - must be 0x630E */
+#define PP_ChipRev 0x0002 /* Chip revision, model codes */
+
+#define PP_IntReg 0x0022 /* Interrupt configuration */
+#define PP_IntReg_IRQ0 0x0000 /* Use INTR0 pin */
+#define PP_IntReg_IRQ1 0x0001 /* Use INTR1 pin */
+#define PP_IntReg_IRQ2 0x0002 /* Use INTR2 pin */
+#define PP_IntReg_IRQ3 0x0003 /* Use INTR3 pin */
+
+/* status and control registers */
+
+#define PP_RxCFG 0x0102 /* Receiver configuration */
+#define PP_RxCFG_Skip1 0x0040 /* Skip (i.e. discard) current frame */
+#define PP_RxCFG_Stream 0x0080 /* Enable streaming mode */
+#define PP_RxCFG_RxOK 0x0100 /* RxOK interrupt enable */
+#define PP_RxCFG_RxDMAonly 0x0200 /* Use RxDMA for all frames */
+#define PP_RxCFG_AutoRxDMA 0x0400 /* Select RxDMA automatically */
+#define PP_RxCFG_BufferCRC 0x0800 /* Include CRC characters in frame */
+#define PP_RxCFG_CRC 0x1000 /* Enable interrupt on CRC error */
+#define PP_RxCFG_RUNT 0x2000 /* Enable interrupt on RUNT frames */
+#define PP_RxCFG_EXTRA 0x4000 /* Enable interrupt on frames with extra data */
+
+#define PP_RxCTL 0x0104 /* Receiver control */
+#define PP_RxCTL_IAHash 0x0040 /* Accept frames that match hash */
+#define PP_RxCTL_Promiscuous 0x0080 /* Accept any frame */
+#define PP_RxCTL_RxOK 0x0100 /* Accept well formed frames */
+#define PP_RxCTL_Multicast 0x0200 /* Accept multicast frames */
+#define PP_RxCTL_IA 0x0400 /* Accept frame that matches IA */
+#define PP_RxCTL_Broadcast 0x0800 /* Accept broadcast frames */
+#define PP_RxCTL_CRC 0x1000 /* Accept frames with bad CRC */
+#define PP_RxCTL_RUNT 0x2000 /* Accept runt frames */
+#define PP_RxCTL_EXTRA 0x4000 /* Accept frames that are too long */
+
+#define PP_TxCFG 0x0106 /* Transmit configuration */
+#define PP_TxCFG_CRS 0x0040 /* Enable interrupt on loss of carrier */
+#define PP_TxCFG_SQE 0x0080 /* Enable interrupt on Signal Quality Error */
+#define PP_TxCFG_TxOK 0x0100 /* Enable interrupt on successful xmits */
+#define PP_TxCFG_Late 0x0200 /* Enable interrupt on "out of window" */
+#define PP_TxCFG_Jabber 0x0400 /* Enable interrupt on jabber detect */
+#define PP_TxCFG_Collision 0x0800 /* Enable interrupt if collision */
+#define PP_TxCFG_16Collisions 0x8000 /* Enable interrupt if > 16 collisions */
+
+#define PP_TxCmd 0x0108 /* Transmit command status */
+#define PP_TxCmd_TxStart_5 0x0000 /* Start after 5 bytes in buffer */
+#define PP_TxCmd_TxStart_381 0x0040 /* Start after 381 bytes in buffer */
+#define PP_TxCmd_TxStart_1021 0x0080 /* Start after 1021 bytes in buffer */
+#define PP_TxCmd_TxStart_Full 0x00C0 /* Start after all bytes loaded */
+#define PP_TxCmd_Force 0x0100 /* Discard any pending packets */
+#define PP_TxCmd_OneCollision 0x0200 /* Abort after a single collision */
+#define PP_TxCmd_NoCRC 0x1000 /* Do not add CRC */
+#define PP_TxCmd_NoPad 0x2000 /* Do not pad short packets */
+
+#define PP_BufCFG 0x010A /* Buffer configuration */
+#define PP_BufCFG_SWI 0x0040 /* Force interrupt via software */
+#define PP_BufCFG_RxDMA 0x0080 /* Enable interrupt on Rx DMA */
+#define PP_BufCFG_TxRDY 0x0100 /* Enable interrupt when ready for Tx */
+#define PP_BufCFG_TxUE 0x0200 /* Enable interrupt in Tx underrun */
+#define PP_BufCFG_RxMiss 0x0400 /* Enable interrupt on missed Rx packets */
+#define PP_BufCFG_Rx128 0x0800 /* Enable Rx interrupt after 128 bytes */
+#define PP_BufCFG_TxCol 0x1000 /* Enable int on Tx collision ctr overflow */
+#define PP_BufCFG_Miss 0x2000 /* Enable int on Rx miss ctr overflow */
+#define PP_BufCFG_RxDest 0x8000 /* Enable int on Rx dest addr match */
+
+#define PP_LineCTL 0x0112 /* Line control */
+#define PP_LineCTL_Rx 0x0040 /* Enable receiver */
+#define PP_LineCTL_Tx 0x0080 /* Enable transmitter */
+#define PP_LineCTL_AUIonly 0x0100 /* AUI interface only */
+#define PP_LineCTL_AutoAUI10BT 0x0200 /* Autodetect AUI or 10BaseT interface */
+#define PP_LineCTL_ModBackoffE 0x0800 /* Enable modified backoff algorithm */
+#define PP_LineCTL_PolarityDis 0x1000 /* Disable Rx polarity autodetect */
+#define PP_LineCTL_2partDefDis 0x2000 /* Disable two-part defferal */
+#define PP_LineCTL_LoRxSquelch 0x4000 /* Reduce receiver squelch threshold */
+
+#define PP_SelfCTL 0x0114 /* Chip self control */
+#define PP_SelfCTL_Reset 0x0040 /* Self-clearing reset */
+#define PP_SelfCTL_SWSuspend 0x0100 /* Initiate suspend mode */
+#define PP_SelfCTL_HWSleepE 0x0200 /* Enable SLEEP input */
+#define PP_SelfCTL_HWStandbyE 0x0400 /* Enable standby mode */
+#define PP_SelfCTL_HC0E 0x1000 /* use HCB0 for LINK LED */
+#define PP_SelfCTL_HC1E 0x2000 /* use HCB1 for BSTATUS LED */
+#define PP_SelfCTL_HCB0 0x4000 /* control LINK LED if HC0E set */
+#define PP_SelfCTL_HCB1 0x8000 /* control BSTATUS LED if HC1E set */
+
+#define PP_BusCTL 0x0116 /* Bus control */
+#define PP_BusCTL_ResetRxDMA 0x0040 /* Reset RxDMA pointer */
+#define PP_BusCTL_DMAextend 0x0100 /* Extend DMA cycle */
+#define PP_BusCTL_UseSA 0x0200 /* Assert MEMCS16 on address decode */
+#define PP_BusCTL_MemoryE 0x0400 /* Enable memory mode */
+#define PP_BusCTL_DMAburst 0x0800 /* Limit DMA access burst */
+#define PP_BusCTL_IOCHRDYE 0x1000 /* Set IOCHRDY high impedence */
+#define PP_BusCTL_RxDMAsize 0x2000 /* Set DMA buffer size 64KB */
+#define PP_BusCTL_EnableIRQ 0x8000 /* Generate interrupt on interrupt event */
+
+#define PP_TestCTL 0x0118 /* Test control */
+#define PP_TestCTL_DisableLT 0x0080 /* Disable link status */
+#define PP_TestCTL_ENDECloop 0x0200 /* Internal loopback */
+#define PP_TestCTL_AUIloop 0x0400 /* AUI loopback */
+#define PP_TestCTL_DisBackoff 0x0800 /* Disable backoff algorithm */
+#define PP_TestCTL_FDX 0x4000 /* Enable full duplex mode */
+
+#define PP_ISQ 0x0120 /* Interrupt Status Queue */
+
+#define PP_RER 0x0124 /* Receive event */
+#define PP_RER_IAHash 0x0040 /* Frame hash match */
+#define PP_RER_Dribble 0x0080 /* Frame had 1-7 extra bits after last byte */
+#define PP_RER_RxOK 0x0100 /* Frame received with no errors */
+#define PP_RER_Hashed 0x0200 /* Frame address hashed OK */
+#define PP_RER_IA 0x0400 /* Frame address matched IA */
+#define PP_RER_Broadcast 0x0800 /* Broadcast frame */
+#define PP_RER_CRC 0x1000 /* Frame had CRC error */
+#define PP_RER_RUNT 0x2000 /* Runt frame */
+#define PP_RER_EXTRA 0x4000 /* Frame was too long */
+
+#define PP_TER 0x0128 /* Transmit event */
+#define PP_TER_CRS 0x0040 /* Carrier lost */
+#define PP_TER_SQE 0x0080 /* Signal Quality Error */
+#define PP_TER_TxOK 0x0100 /* Packet sent without error */
+#define PP_TER_Late 0x0200 /* Out of window */
+#define PP_TER_Jabber 0x0400 /* Stuck transmit? */
+#define PP_TER_NumCollisions 0x7800 /* Number of collisions */
+#define PP_TER_16Collisions 0x8000 /* > 16 collisions */
+
+#define PP_BER 0x012C /* Buffer event */
+#define PP_BER_SWint 0x0040 /* Software interrupt */
+#define PP_BER_RxDMAFrame 0x0080 /* Received framed DMAed */
+#define PP_BER_Rdy4Tx 0x0100 /* Ready for transmission */
+#define PP_BER_TxUnderrun 0x0200 /* Transmit underrun */
+#define PP_BER_RxMiss 0x0400 /* Received frame missed */
+#define PP_BER_Rx128 0x0800 /* 128 bytes received */
+#define PP_BER_RxDest 0x8000 /* Received framed passed address filter */
+
+#define PP_RxMiss 0x0130 /* Receiver miss counter */
+
+#define PP_TxCol 0x0132 /* Transmit collision counter */
+
+#define PP_LineSTAT 0x0134 /* Line status */
+#define PP_LineSTAT_LinkOK 0x0080 /* Line is connected and working */
+#define PP_LineSTAT_AUI 0x0100 /* Connected via AUI */
+#define PP_LineSTAT_10BT 0x0200 /* Connected via twisted pair */
+#define PP_LineSTAT_Polarity 0x1000 /* Line polarity OK (10BT only) */
+#define PP_LineSTAT_CRS 0x4000 /* Frame being received */
+
+#define PP_SelfSTAT 0x0136 /* Chip self status */
+#define PP_SelfSTAT_33VActive 0x0040 /* supply voltage is 3.3V */
+#define PP_SelfSTAT_InitD 0x0080 /* Chip initialization complete */
+#define PP_SelfSTAT_SIBSY 0x0100 /* EEPROM is busy */
+#define PP_SelfSTAT_EEPROM 0x0200 /* EEPROM present */
+#define PP_SelfSTAT_EEPROM_OK 0x0400 /* EEPROM checks out */
+#define PP_SelfSTAT_ELPresent 0x0800 /* External address latch logic available */
+#define PP_SelfSTAT_EEsize 0x1000 /* Size of EEPROM */
+
+#define PP_BusSTAT 0x0138 /* Bus status */
+#define PP_BusSTAT_TxBid 0x0080 /* Tx error */
+#define PP_BusSTAT_TxRDY 0x0100 /* Ready for Tx data */
+
+#define PP_TDR 0x013C /* AUI Time Domain Reflectometer */
+
+/* initiate transmit registers */
+
+#define PP_TxCommand 0x0144 /* Tx Command */
+#define PP_TxLength 0x0146 /* Tx Length */
+
+
+/* address filter registers */
+
+#define PP_LAF 0x0150 /* Logical address filter (6 bytes) */
+#define PP_IA 0x0158 /* Individual address (MAC) */
+
+/* EEPROM Kram */
+#define SI_BUSY 0x0100
+#define PP_SelfST 0x0136 /* Self State register */
+#define PP_EECMD 0x0040 /* NVR Interface Command register */
+#define PP_EEData 0x0042 /* NVR Interface Data Register */
+#define EEPROM_WRITE_EN 0x00F0
+#define EEPROM_WRITE_DIS 0x0000
+#define EEPROM_WRITE_CMD 0x0100
+#define EEPROM_READ_CMD 0x0200
+#define EEPROM_ERASE_CMD 0x0300
+
+extern int cs8900_e2prom_read(uchar, ushort *);
+extern int cs8900_e2prom_write(uchar, ushort);
+
+#endif /* CONFIG_DRIVER_CS8900 */
diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c
new file mode 100644
index 0000000..d5275dc
--- /dev/null
+++ b/drivers/net/dc2114x.c
@@ -0,0 +1,771 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_CMD_NET) \
+ && defined(CONFIG_NET_MULTI) && defined(CONFIG_TULIP)
+
+#include <malloc.h>
+#include <net.h>
+#include <pci.h>
+
+#undef DEBUG_SROM
+#undef DEBUG_SROM2
+
+#undef UPDATE_SROM
+
+/* PCI Registers.
+ */
+#define PCI_CFDA_PSM 0x43
+
+#define CFRV_RN 0x000000f0 /* Revision Number */
+
+#define WAKEUP 0x00 /* Power Saving Wakeup */
+#define SLEEP 0x80 /* Power Saving Sleep Mode */
+
+#define DC2114x_BRK 0x0020 /* CFRV break between DC21142 & DC21143 */
+
+/* Ethernet chip registers.
+ */
+#define DE4X5_BMR 0x000 /* Bus Mode Register */
+#define DE4X5_TPD 0x008 /* Transmit Poll Demand Reg */
+#define DE4X5_RRBA 0x018 /* RX Ring Base Address Reg */
+#define DE4X5_TRBA 0x020 /* TX Ring Base Address Reg */
+#define DE4X5_STS 0x028 /* Status Register */
+#define DE4X5_OMR 0x030 /* Operation Mode Register */
+#define DE4X5_SICR 0x068 /* SIA Connectivity Register */
+#define DE4X5_APROM 0x048 /* Ethernet Address PROM */
+
+/* Register bits.
+ */
+#define BMR_SWR 0x00000001 /* Software Reset */
+#define STS_TS 0x00700000 /* Transmit Process State */
+#define STS_RS 0x000e0000 /* Receive Process State */
+#define OMR_ST 0x00002000 /* Start/Stop Transmission Command */
+#define OMR_SR 0x00000002 /* Start/Stop Receive */
+#define OMR_PS 0x00040000 /* Port Select */
+#define OMR_SDP 0x02000000 /* SD Polarity - MUST BE ASSERTED */
+#define OMR_PM 0x00000080 /* Pass All Multicast */
+
+/* Descriptor bits.
+ */
+#define R_OWN 0x80000000 /* Own Bit */
+#define RD_RER 0x02000000 /* Receive End Of Ring */
+#define RD_LS 0x00000100 /* Last Descriptor */
+#define RD_ES 0x00008000 /* Error Summary */
+#define TD_TER 0x02000000 /* Transmit End Of Ring */
+#define T_OWN 0x80000000 /* Own Bit */
+#define TD_LS 0x40000000 /* Last Segment */
+#define TD_FS 0x20000000 /* First Segment */
+#define TD_ES 0x00008000 /* Error Summary */
+#define TD_SET 0x08000000 /* Setup Packet */
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define SROM_WRITE_CMD 5
+#define SROM_READ_CMD 6
+#define SROM_ERASE_CMD 7
+
+#define SROM_HWADD 0x0014 /* Hardware Address offset in SROM */
+#define SROM_RD 0x00004000 /* Read from Boot ROM */
+#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x4801
+#define EE_WRITE_1 0x4805
+#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
+#define SROM_SR 0x00000800 /* Select Serial ROM when set */
+
+#define DT_IN 0x00000004 /* Serial Data In */
+#define DT_CLK 0x00000002 /* Serial ROM Clock */
+#define DT_CS 0x00000001 /* Serial ROM Chip Select */
+
+#define POLL_DEMAND 1
+
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+#define RESET_DM9102(dev) {\
+ unsigned long i;\
+ i=INL(dev, 0x0);\
+ udelay(1000);\
+ OUTL(dev, i | BMR_SWR, DE4X5_BMR);\
+ udelay(1000);\
+}
+#else
+#define RESET_DE4X5(dev) {\
+ int i;\
+ i=INL(dev, DE4X5_BMR);\
+ udelay(1000);\
+ OUTL(dev, i | BMR_SWR, DE4X5_BMR);\
+ udelay(1000);\
+ OUTL(dev, i, DE4X5_BMR);\
+ udelay(1000);\
+ for (i=0;i<5;i++) {INL(dev, DE4X5_BMR); udelay(10000);}\
+ udelay(1000);\
+}
+#endif
+
+#define START_DE4X5(dev) {\
+ s32 omr; \
+ omr = INL(dev, DE4X5_OMR);\
+ omr |= OMR_ST | OMR_SR;\
+ OUTL(dev, omr, DE4X5_OMR); /* Enable the TX and/or RX */\
+}
+
+#define STOP_DE4X5(dev) {\
+ s32 omr; \
+ omr = INL(dev, DE4X5_OMR);\
+ omr &= ~(OMR_ST|OMR_SR);\
+ OUTL(dev, omr, DE4X5_OMR); /* Disable the TX and/or RX */ \
+}
+
+#define NUM_RX_DESC PKTBUFSRX
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+ #define NUM_TX_DESC 1 /* Number of TX descriptors */
+#else
+ #define NUM_TX_DESC 4
+#endif
+#define RX_BUFF_SZ PKTSIZE_ALIGN
+
+#define TOUT_LOOP 1000000
+
+#define SETUP_FRAME_LEN 192
+#define ETH_ALEN 6
+
+struct de4x5_desc {
+ volatile s32 status;
+ u32 des1;
+ u32 buf;
+ u32 next;
+};
+
+static struct de4x5_desc rx_ring[NUM_RX_DESC] __attribute__ ((aligned(32))); /* RX descriptor ring */
+static struct de4x5_desc tx_ring[NUM_TX_DESC] __attribute__ ((aligned(32))); /* TX descriptor ring */
+static int rx_new; /* RX descriptor ring pointer */
+static int tx_new; /* TX descriptor ring pointer */
+
+static char rxRingSize;
+static char txRingSize;
+
+#if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM)
+static void sendto_srom(struct eth_device* dev, u_int command, u_long addr);
+static int getfrom_srom(struct eth_device* dev, u_long addr);
+static int do_eeprom_cmd(struct eth_device *dev, u_long ioaddr,int cmd,int cmd_len);
+static int do_read_eeprom(struct eth_device *dev,u_long ioaddr,int location,int addr_len);
+#endif /* UPDATE_SROM || !CONFIG_TULIP_FIX_DAVICOM */
+#ifdef UPDATE_SROM
+static int write_srom(struct eth_device *dev, u_long ioaddr, int index, int new_value);
+static void update_srom(struct eth_device *dev, bd_t *bis);
+#endif
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+static int read_srom(struct eth_device *dev, u_long ioaddr, int index);
+static void read_hw_addr(struct eth_device* dev, bd_t * bis);
+#endif /* CONFIG_TULIP_FIX_DAVICOM */
+static void send_setup_frame(struct eth_device* dev, bd_t * bis);
+
+static int dc21x4x_init(struct eth_device* dev, bd_t* bis);
+static int dc21x4x_send(struct eth_device* dev, volatile void *packet, int length);
+static int dc21x4x_recv(struct eth_device* dev);
+static void dc21x4x_halt(struct eth_device* dev);
+#ifdef CONFIG_TULIP_SELECT_MEDIA
+extern void dc21x4x_select_media(struct eth_device* dev);
+#endif
+
+#if defined(CONFIG_E500)
+#define phys_to_bus(a) (a)
+#else
+#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+#endif
+
+static int INL(struct eth_device* dev, u_long addr)
+{
+ return le32_to_cpu(*(volatile u_long *)(addr + dev->iobase));
+}
+
+static void OUTL(struct eth_device* dev, int command, u_long addr)
+{
+ *(volatile u_long *)(addr + dev->iobase) = cpu_to_le32(command);
+}
+
+static struct pci_device_id supported[] = {
+ { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST },
+ { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142 },
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ { PCI_VENDOR_ID_DAVICOM, PCI_DEVICE_ID_DAVICOM_DM9102A },
+#endif
+ { }
+};
+
+int dc21x4x_initialize(bd_t *bis)
+{
+ int idx=0;
+ int card_number = 0;
+ unsigned int cfrv;
+ unsigned char timer;
+ pci_dev_t devbusfn;
+ unsigned int iobase;
+ unsigned short status;
+ struct eth_device* dev;
+
+ while(1) {
+ devbusfn = pci_find_devices(supported, idx++);
+ if (devbusfn == -1) {
+ break;
+ }
+
+ /* Get the chip configuration revision register. */
+ pci_read_config_dword(devbusfn, PCI_REVISION_ID, &cfrv);
+
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+ if ((cfrv & CFRV_RN) < DC2114x_BRK ) {
+ printf("Error: The chip is not DC21143.\n");
+ continue;
+ }
+#endif
+
+ pci_read_config_word(devbusfn, PCI_COMMAND, &status);
+ status |=
+#ifdef CONFIG_TULIP_USE_IO
+ PCI_COMMAND_IO |
+#else
+ PCI_COMMAND_MEMORY |
+#endif
+ PCI_COMMAND_MASTER;
+ pci_write_config_word(devbusfn, PCI_COMMAND, status);
+
+ pci_read_config_word(devbusfn, PCI_COMMAND, &status);
+ if (!(status & PCI_COMMAND_IO)) {
+ printf("Error: Can not enable I/O access.\n");
+ continue;
+ }
+
+ if (!(status & PCI_COMMAND_IO)) {
+ printf("Error: Can not enable I/O access.\n");
+ continue;
+ }
+
+ if (!(status & PCI_COMMAND_MASTER)) {
+ printf("Error: Can not enable Bus Mastering.\n");
+ continue;
+ }
+
+ /* Check the latency timer for values >= 0x60. */
+ pci_read_config_byte(devbusfn, PCI_LATENCY_TIMER, &timer);
+
+ if (timer < 0x60) {
+ pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x60);
+ }
+
+#ifdef CONFIG_TULIP_USE_IO
+ /* read BAR for memory space access */
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &iobase);
+ iobase &= PCI_BASE_ADDRESS_IO_MASK;
+#else
+ /* read BAR for memory space access */
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &iobase);
+ iobase &= PCI_BASE_ADDRESS_MEM_MASK;
+#endif
+ debug ("dc21x4x: DEC 21142 PCI Device @0x%x\n", iobase);
+
+ dev = (struct eth_device*) malloc(sizeof *dev);
+
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ sprintf(dev->name, "Davicom#%d", card_number);
+#else
+ sprintf(dev->name, "dc21x4x#%d", card_number);
+#endif
+
+#ifdef CONFIG_TULIP_USE_IO
+ dev->iobase = pci_io_to_phys(devbusfn, iobase);
+#else
+ dev->iobase = pci_mem_to_phys(devbusfn, iobase);
+#endif
+ dev->priv = (void*) devbusfn;
+ dev->init = dc21x4x_init;
+ dev->halt = dc21x4x_halt;
+ dev->send = dc21x4x_send;
+ dev->recv = dc21x4x_recv;
+
+ /* Ensure we're not sleeping. */
+ pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP);
+
+ udelay(10 * 1000);
+
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+ read_hw_addr(dev, bis);
+#endif
+ eth_register(dev);
+
+ card_number++;
+ }
+
+ return card_number;
+}
+
+static int dc21x4x_init(struct eth_device* dev, bd_t* bis)
+{
+ int i;
+ int devbusfn = (int) dev->priv;
+
+ /* Ensure we're not sleeping. */
+ pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP);
+
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ RESET_DM9102(dev);
+#else
+ RESET_DE4X5(dev);
+#endif
+
+ if ((INL(dev, DE4X5_STS) & (STS_TS | STS_RS)) != 0) {
+ printf("Error: Cannot reset ethernet controller.\n");
+ return 0;
+ }
+
+#ifdef CONFIG_TULIP_SELECT_MEDIA
+ dc21x4x_select_media(dev);
+#else
+ OUTL(dev, OMR_SDP | OMR_PS | OMR_PM, DE4X5_OMR);
+#endif
+
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ rx_ring[i].status = cpu_to_le32(R_OWN);
+ rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
+ rx_ring[i].buf = cpu_to_le32(phys_to_bus((u32) NetRxPackets[i]));
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ rx_ring[i].next = cpu_to_le32(phys_to_bus((u32) &rx_ring[(i+1) % NUM_RX_DESC]));
+#else
+ rx_ring[i].next = 0;
+#endif
+ }
+
+ for (i=0; i < NUM_TX_DESC; i++) {
+ tx_ring[i].status = 0;
+ tx_ring[i].des1 = 0;
+ tx_ring[i].buf = 0;
+
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ tx_ring[i].next = cpu_to_le32(phys_to_bus((u32) &tx_ring[(i+1) % NUM_TX_DESC]));
+#else
+ tx_ring[i].next = 0;
+#endif
+ }
+
+ rxRingSize = NUM_RX_DESC;
+ txRingSize = NUM_TX_DESC;
+
+ /* Write the end of list marker to the descriptor lists. */
+ rx_ring[rxRingSize - 1].des1 |= cpu_to_le32(RD_RER);
+ tx_ring[txRingSize - 1].des1 |= cpu_to_le32(TD_TER);
+
+ /* Tell the adapter where the TX/RX rings are located. */
+ OUTL(dev, phys_to_bus((u32) &rx_ring), DE4X5_RRBA);
+ OUTL(dev, phys_to_bus((u32) &tx_ring), DE4X5_TRBA);
+
+ START_DE4X5(dev);
+
+ tx_new = 0;
+ rx_new = 0;
+
+ send_setup_frame(dev, bis);
+
+ return 1;
+}
+
+static int dc21x4x_send(struct eth_device* dev, volatile void *packet, int length)
+{
+ int status = -1;
+ int i;
+
+ if (length <= 0) {
+ printf("%s: bad packet size: %d\n", dev->name, length);
+ goto Done;
+ }
+
+ for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) {
+ if (i >= TOUT_LOOP) {
+ printf("%s: tx error buffer not ready\n", dev->name);
+ goto Done;
+ }
+ }
+
+ tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus((u32) packet));
+ tx_ring[tx_new].des1 = cpu_to_le32(TD_TER | TD_LS | TD_FS | length);
+ tx_ring[tx_new].status = cpu_to_le32(T_OWN);
+
+ OUTL(dev, POLL_DEMAND, DE4X5_TPD);
+
+ for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) {
+ if (i >= TOUT_LOOP) {
+ printf(".%s: tx buffer not ready\n", dev->name);
+ goto Done;
+ }
+ }
+
+ if (le32_to_cpu(tx_ring[tx_new].status) & TD_ES) {
+#if 0 /* test-only */
+ printf("TX error status = 0x%08X\n",
+ le32_to_cpu(tx_ring[tx_new].status));
+#endif
+ tx_ring[tx_new].status = 0x0;
+ goto Done;
+ }
+
+ status = length;
+
+ Done:
+ tx_new = (tx_new+1) % NUM_TX_DESC;
+ return status;
+}
+
+static int dc21x4x_recv(struct eth_device* dev)
+{
+ s32 status;
+ int length = 0;
+
+ for ( ; ; ) {
+ status = (s32)le32_to_cpu(rx_ring[rx_new].status);
+
+ if (status & R_OWN) {
+ break;
+ }
+
+ if (status & RD_LS) {
+ /* Valid frame status.
+ */
+ if (status & RD_ES) {
+
+ /* There was an error.
+ */
+ printf("RX error status = 0x%08X\n", status);
+ } else {
+ /* A valid frame received.
+ */
+ length = (le32_to_cpu(rx_ring[rx_new].status) >> 16);
+
+ /* Pass the packet up to the protocol
+ * layers.
+ */
+ NetReceive(NetRxPackets[rx_new], length - 4);
+ }
+
+ /* Change buffer ownership for this frame, back
+ * to the adapter.
+ */
+ rx_ring[rx_new].status = cpu_to_le32(R_OWN);
+ }
+
+ /* Update entry information.
+ */
+ rx_new = (rx_new + 1) % rxRingSize;
+ }
+
+ return length;
+}
+
+static void dc21x4x_halt(struct eth_device* dev)
+{
+ int devbusfn = (int) dev->priv;
+
+ STOP_DE4X5(dev);
+ OUTL(dev, 0, DE4X5_SICR);
+
+ pci_write_config_byte(devbusfn, PCI_CFDA_PSM, SLEEP);
+}
+
+static void send_setup_frame(struct eth_device* dev, bd_t *bis)
+{
+ int i;
+ char setup_frame[SETUP_FRAME_LEN];
+ char *pa = &setup_frame[0];
+
+ memset(pa, 0xff, SETUP_FRAME_LEN);
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ *(pa + (i & 1)) = dev->enetaddr[i];
+ if (i & 0x01) {
+ pa += 4;
+ }
+ }
+
+ for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) {
+ if (i >= TOUT_LOOP) {
+ printf("%s: tx error buffer not ready\n", dev->name);
+ goto Done;
+ }
+ }
+
+ tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus((u32) &setup_frame[0]));
+ tx_ring[tx_new].des1 = cpu_to_le32(TD_TER | TD_SET| SETUP_FRAME_LEN);
+ tx_ring[tx_new].status = cpu_to_le32(T_OWN);
+
+ OUTL(dev, POLL_DEMAND, DE4X5_TPD);
+
+ for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) {
+ if (i >= TOUT_LOOP) {
+ printf("%s: tx buffer not ready\n", dev->name);
+ goto Done;
+ }
+ }
+
+ if (le32_to_cpu(tx_ring[tx_new].status) != 0x7FFFFFFF) {
+ printf("TX error status2 = 0x%08X\n", le32_to_cpu(tx_ring[tx_new].status));
+ }
+ tx_new = (tx_new+1) % NUM_TX_DESC;
+
+Done:
+ return;
+}
+
+#if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM)
+/* SROM Read and write routines.
+ */
+static void
+sendto_srom(struct eth_device* dev, u_int command, u_long addr)
+{
+ OUTL(dev, command, addr);
+ udelay(1);
+}
+
+static int
+getfrom_srom(struct eth_device* dev, u_long addr)
+{
+ s32 tmp;
+
+ tmp = INL(dev, addr);
+ udelay(1);
+
+ return tmp;
+}
+
+/* Note: this routine returns extra data bits for size detection. */
+static int do_read_eeprom(struct eth_device *dev, u_long ioaddr, int location, int addr_len)
+{
+ int i;
+ unsigned retval = 0;
+ int read_cmd = location | (SROM_READ_CMD << addr_len);
+
+ sendto_srom(dev, SROM_RD | SROM_SR, ioaddr);
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
+
+#ifdef DEBUG_SROM
+ printf(" EEPROM read at %d ", location);
+#endif
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | dataval, ioaddr);
+ udelay(10);
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | dataval | DT_CLK, ioaddr);
+ udelay(10);
+#ifdef DEBUG_SROM2
+ printf("%X", getfrom_srom(dev, ioaddr) & 15);
+#endif
+ retval = (retval << 1) | ((getfrom_srom(dev, ioaddr) & EE_DATA_READ) ? 1 : 0);
+ }
+
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
+
+#ifdef DEBUG_SROM2
+ printf(" :%X:", getfrom_srom(dev, ioaddr) & 15);
+#endif
+
+ for (i = 16; i > 0; i--) {
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | DT_CLK, ioaddr);
+ udelay(10);
+#ifdef DEBUG_SROM2
+ printf("%X", getfrom_srom(dev, ioaddr) & 15);
+#endif
+ retval = (retval << 1) | ((getfrom_srom(dev, ioaddr) & EE_DATA_READ) ? 1 : 0);
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
+ udelay(10);
+ }
+
+ /* Terminate the EEPROM access. */
+ sendto_srom(dev, SROM_RD | SROM_SR, ioaddr);
+
+#ifdef DEBUG_SROM2
+ printf(" EEPROM value at %d is %5.5x.\n", location, retval);
+#endif
+
+ return retval;
+}
+#endif /* UPDATE_SROM || !CONFIG_TULIP_FIX_DAVICOM */
+
+/* This executes a generic EEPROM command, typically a write or write
+ * enable. It returns the data output from the EEPROM, and thus may
+ * also be used for reads.
+ */
+#if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM)
+static int do_eeprom_cmd(struct eth_device *dev, u_long ioaddr, int cmd, int cmd_len)
+{
+ unsigned retval = 0;
+
+#ifdef DEBUG_SROM
+ printf(" EEPROM op 0x%x: ", cmd);
+#endif
+
+ sendto_srom(dev,SROM_RD | SROM_SR | DT_CS | DT_CLK, ioaddr);
+
+ /* Shift the command bits out. */
+ do {
+ short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0;
+ sendto_srom(dev,dataval, ioaddr);
+ udelay(10);
+
+#ifdef DEBUG_SROM2
+ printf("%X", getfrom_srom(dev,ioaddr) & 15);
+#endif
+
+ sendto_srom(dev,dataval | DT_CLK, ioaddr);
+ udelay(10);
+ retval = (retval << 1) | ((getfrom_srom(dev,ioaddr) & EE_DATA_READ) ? 1 : 0);
+ } while (--cmd_len >= 0);
+ sendto_srom(dev,SROM_RD | SROM_SR | DT_CS, ioaddr);
+
+ /* Terminate the EEPROM access. */
+ sendto_srom(dev,SROM_RD | SROM_SR, ioaddr);
+
+#ifdef DEBUG_SROM
+ printf(" EEPROM result is 0x%5.5x.\n", retval);
+#endif
+
+ return retval;
+}
+#endif /* UPDATE_SROM || !CONFIG_TULIP_FIX_DAVICOM */
+
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+static int read_srom(struct eth_device *dev, u_long ioaddr, int index)
+{
+ int ee_addr_size = do_read_eeprom(dev, ioaddr, 0xff, 8) & 0x40000 ? 8 : 6;
+
+ return do_eeprom_cmd(dev, ioaddr,
+ (((SROM_READ_CMD << ee_addr_size) | index) << 16)
+ | 0xffff, 3 + ee_addr_size + 16);
+}
+#endif /* CONFIG_TULIP_FIX_DAVICOM */
+
+#ifdef UPDATE_SROM
+static int write_srom(struct eth_device *dev, u_long ioaddr, int index, int new_value)
+{
+ int ee_addr_size = do_read_eeprom(dev, ioaddr, 0xff, 8) & 0x40000 ? 8 : 6;
+ int i;
+ unsigned short newval;
+
+ udelay(10*1000); /* test-only */
+
+#ifdef DEBUG_SROM
+ printf("ee_addr_size=%d.\n", ee_addr_size);
+ printf("Writing new entry 0x%4.4x to offset %d.\n", new_value, index);
+#endif
+
+ /* Enable programming modes. */
+ do_eeprom_cmd(dev, ioaddr, (0x4f << (ee_addr_size-4)), 3+ee_addr_size);
+
+ /* Do the actual write. */
+ do_eeprom_cmd(dev, ioaddr,
+ (((SROM_WRITE_CMD<<ee_addr_size)|index) << 16) | new_value,
+ 3 + ee_addr_size + 16);
+
+ /* Poll for write finished. */
+ sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
+ for (i = 0; i < 10000; i++) /* Typical 2000 ticks */
+ if (getfrom_srom(dev, ioaddr) & EE_DATA_READ)
+ break;
+
+#ifdef DEBUG_SROM
+ printf(" Write finished after %d ticks.\n", i);
+#endif
+
+ /* Disable programming. */
+ do_eeprom_cmd(dev, ioaddr, (0x40 << (ee_addr_size-4)), 3 + ee_addr_size);
+
+ /* And read the result. */
+ newval = do_eeprom_cmd(dev, ioaddr,
+ (((SROM_READ_CMD<<ee_addr_size)|index) << 16)
+ | 0xffff, 3 + ee_addr_size + 16);
+#ifdef DEBUG_SROM
+ printf(" New value at offset %d is %4.4x.\n", index, newval);
+#endif
+ return 1;
+}
+#endif
+
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+static void read_hw_addr(struct eth_device *dev, bd_t *bis)
+{
+ u_short tmp, *p = (u_short *)(&dev->enetaddr[0]);
+ int i, j = 0;
+
+ for (i = 0; i < (ETH_ALEN >> 1); i++) {
+ tmp = read_srom(dev, DE4X5_APROM, ((SROM_HWADD >> 1) + i));
+ *p = le16_to_cpu(tmp);
+ j += *p++;
+ }
+
+ if ((j == 0) || (j == 0x2fffd)) {
+ memset (dev->enetaddr, 0, ETH_ALEN);
+ debug ("Warning: can't read HW address from SROM.\n");
+ goto Done;
+ }
+
+ return;
+
+Done:
+#ifdef UPDATE_SROM
+ update_srom(dev, bis);
+#endif
+ return;
+}
+#endif /* CONFIG_TULIP_FIX_DAVICOM */
+
+#ifdef UPDATE_SROM
+static void update_srom(struct eth_device *dev, bd_t *bis)
+{
+ int i;
+ static unsigned short eeprom[0x40] = {
+ 0x140b, 0x6610, 0x0000, 0x0000, /* 00 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 04 */
+ 0x00a3, 0x0103, 0x0000, 0x0000, /* 08 */
+ 0x0000, 0x1f00, 0x0000, 0x0000, /* 0c */
+ 0x0108, 0x038d, 0x0000, 0x0000, /* 10 */
+ 0xe078, 0x0001, 0x0040, 0x0018, /* 14 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 18 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 1c */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 20 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 24 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 28 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 2c */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 30 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 34 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 38 */
+ 0x0000, 0x0000, 0x0000, 0x4e07, /* 3c */
+ };
+
+ /* Ethernet Addr... */
+ eeprom[0x0a] = ((bis->bi_enetaddr[1] & 0xff) << 8) | (bis->bi_enetaddr[0] & 0xff);
+ eeprom[0x0b] = ((bis->bi_enetaddr[3] & 0xff) << 8) | (bis->bi_enetaddr[2] & 0xff);
+ eeprom[0x0c] = ((bis->bi_enetaddr[5] & 0xff) << 8) | (bis->bi_enetaddr[4] & 0xff);
+
+ for (i=0; i<0x40; i++)
+ {
+ write_srom(dev, DE4X5_APROM, i, eeprom[i]);
+ }
+}
+#endif /* UPDATE_SROM */
+
+#endif
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
new file mode 100644
index 0000000..6131b5c
--- /dev/null
+++ b/drivers/net/dm9000x.c
@@ -0,0 +1,620 @@
+/*
+ dm9000.c: Version 1.2 12/15/2003
+
+ A Davicom DM9000 ISA NIC fast Ethernet driver for Linux.
+ Copyright (C) 1997 Sten Wang
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
+
+V0.11 06/20/2001 REG_0A bit3=1, default enable BP with DA match
+ 06/22/2001 Support DM9801 progrmming
+ E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
+ E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
+ R17 = (R17 & 0xfff0) | NF + 3
+ E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
+ R17 = (R17 & 0xfff0) | NF
+
+v1.00 modify by simon 2001.9.5
+ change for kernel 2.4.x
+
+v1.1 11/09/2001 fix force mode bug
+
+v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>:
+ Fixed phy reset.
+ Added tx/rx 32 bit mode.
+ Cleaned up for kernel merge.
+
+--------------------------------------
+
+ 12/15/2003 Initial port to u-boot by Sascha Hauer <saschahauer@web.de>
+
+TODO: Homerun NIC and longrun NIC are not functional, only internal at the
+ moment.
+*/
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_DRIVER_DM9000
+
+#include "dm9000x.h"
+
+/* Board/System/Debug information/definition ---------------- */
+
+#define DM9801_NOISE_FLOOR 0x08
+#define DM9802_NOISE_FLOOR 0x05
+
+/* #define CONFIG_DM9000_DEBUG */
+
+#ifdef CONFIG_DM9000_DEBUG
+#define DM9000_DBG(fmt,args...) printf(fmt ,##args)
+#else /* */
+#define DM9000_DBG(fmt,args...)
+#endif /* */
+enum DM9000_PHY_mode { DM9000_10MHD = 0, DM9000_100MHD =
+ 1, DM9000_10MFD = 4, DM9000_100MFD = 5, DM9000_AUTO =
+ 8, DM9000_1M_HPNA = 0x10
+};
+enum DM9000_NIC_TYPE { FASTETHER_NIC = 0, HOMERUN_NIC = 1, LONGRUN_NIC = 2
+};
+
+/* Structure/enum declaration ------------------------------- */
+typedef struct board_info {
+ u32 runt_length_counter; /* counter: RX length < 64byte */
+ u32 long_length_counter; /* counter: RX length > 1514byte */
+ u32 reset_counter; /* counter: RESET */
+ u32 reset_tx_timeout; /* RESET caused by TX Timeout */
+ u32 reset_rx_status; /* RESET caused by RX Statsus wrong */
+ u16 tx_pkt_cnt;
+ u16 queue_start_addr;
+ u16 dbug_cnt;
+ u8 phy_addr;
+ u8 device_wait_reset; /* device state */
+ u8 nic_type; /* NIC type */
+ unsigned char srom[128];
+} board_info_t;
+board_info_t dmfe_info;
+
+/* For module input parameter */
+static int media_mode = DM9000_AUTO;
+static u8 nfloor = 0;
+
+/* function declaration ------------------------------------- */
+int eth_init(bd_t * bd);
+int eth_send(volatile void *, int);
+int eth_rx(void);
+void eth_halt(void);
+static int dm9000_probe(void);
+static u16 phy_read(int);
+static void phy_write(int, u16);
+u16 read_srom_word(int);
+static u8 DM9000_ior(int);
+static void DM9000_iow(int reg, u8 value);
+
+/* DM9000 network board routine ---------------------------- */
+
+#define DM9000_outb(d,r) ( *(volatile u8 *)r = d )
+#define DM9000_outw(d,r) ( *(volatile u16 *)r = d )
+#define DM9000_outl(d,r) ( *(volatile u32 *)r = d )
+#define DM9000_inb(r) (*(volatile u8 *)r)
+#define DM9000_inw(r) (*(volatile u16 *)r)
+#define DM9000_inl(r) (*(volatile u32 *)r)
+
+#ifdef CONFIG_DM9000_DEBUG
+static void
+dump_regs(void)
+{
+ DM9000_DBG("\n");
+ DM9000_DBG("NCR (0x00): %02x\n", DM9000_ior(0));
+ DM9000_DBG("NSR (0x01): %02x\n", DM9000_ior(1));
+ DM9000_DBG("TCR (0x02): %02x\n", DM9000_ior(2));
+ DM9000_DBG("TSRI (0x03): %02x\n", DM9000_ior(3));
+ DM9000_DBG("TSRII (0x04): %02x\n", DM9000_ior(4));
+ DM9000_DBG("RCR (0x05): %02x\n", DM9000_ior(5));
+ DM9000_DBG("RSR (0x06): %02x\n", DM9000_ior(6));
+ DM9000_DBG("ISR (0xFE): %02x\n", DM9000_ior(ISR));
+ DM9000_DBG("\n");
+}
+#endif /* */
+
+/*
+ Search DM9000 board, allocate space and register it
+*/
+int
+dm9000_probe(void)
+{
+ u32 id_val;
+ id_val = DM9000_ior(DM9000_VIDL);
+ id_val |= DM9000_ior(DM9000_VIDH) << 8;
+ id_val |= DM9000_ior(DM9000_PIDL) << 16;
+ id_val |= DM9000_ior(DM9000_PIDH) << 24;
+ if (id_val == DM9000_ID) {
+ printf("dm9000 i/o: 0x%x, id: 0x%x \n", CONFIG_DM9000_BASE,
+ id_val);
+ return 0;
+ } else {
+ printf("dm9000 not found at 0x%08x id: 0x%08x\n",
+ CONFIG_DM9000_BASE, id_val);
+ return -1;
+ }
+}
+
+/* Set PHY operationg mode
+*/
+static void
+set_PHY_mode(void)
+{
+ u16 phy_reg4 = 0x01e1, phy_reg0 = 0x1000;
+ if (!(media_mode & DM9000_AUTO)) {
+ switch (media_mode) {
+ case DM9000_10MHD:
+ phy_reg4 = 0x21;
+ phy_reg0 = 0x0000;
+ break;
+ case DM9000_10MFD:
+ phy_reg4 = 0x41;
+ phy_reg0 = 0x1100;
+ break;
+ case DM9000_100MHD:
+ phy_reg4 = 0x81;
+ phy_reg0 = 0x2000;
+ break;
+ case DM9000_100MFD:
+ phy_reg4 = 0x101;
+ phy_reg0 = 0x3100;
+ break;
+ }
+ phy_write(4, phy_reg4); /* Set PHY media mode */
+ phy_write(0, phy_reg0); /* Tmp */
+ }
+ DM9000_iow(DM9000_GPCR, 0x01); /* Let GPIO0 output */
+ DM9000_iow(DM9000_GPR, 0x00); /* Enable PHY */
+}
+
+/*
+ Init HomeRun DM9801
+*/
+static void
+program_dm9801(u16 HPNA_rev)
+{
+ __u16 reg16, reg17, reg24, reg25;
+ if (!nfloor)
+ nfloor = DM9801_NOISE_FLOOR;
+ reg16 = phy_read(16);
+ reg17 = phy_read(17);
+ reg24 = phy_read(24);
+ reg25 = phy_read(25);
+ switch (HPNA_rev) {
+ case 0xb900: /* DM9801 E3 */
+ reg16 |= 0x1000;
+ reg25 = ((reg24 + nfloor) & 0x00ff) | 0xf000;
+ break;
+ case 0xb901: /* DM9801 E4 */
+ reg25 = ((reg24 + nfloor) & 0x00ff) | 0xc200;
+ reg17 = (reg17 & 0xfff0) + nfloor + 3;
+ break;
+ case 0xb902: /* DM9801 E5 */
+ case 0xb903: /* DM9801 E6 */
+ default:
+ reg16 |= 0x1000;
+ reg25 = ((reg24 + nfloor - 3) & 0x00ff) | 0xc200;
+ reg17 = (reg17 & 0xfff0) + nfloor;
+ }
+ phy_write(16, reg16);
+ phy_write(17, reg17);
+ phy_write(25, reg25);
+}
+
+/*
+ Init LongRun DM9802
+*/
+static void
+program_dm9802(void)
+{
+ __u16 reg25;
+ if (!nfloor)
+ nfloor = DM9802_NOISE_FLOOR;
+ reg25 = phy_read(25);
+ reg25 = (reg25 & 0xff00) + nfloor;
+ phy_write(25, reg25);
+}
+
+/* Identify NIC type
+*/
+static void
+identify_nic(void)
+{
+ struct board_info *db = &dmfe_info; /* Point a board information structure */
+ u16 phy_reg3;
+ DM9000_iow(DM9000_NCR, NCR_EXT_PHY);
+ phy_reg3 = phy_read(3);
+ switch (phy_reg3 & 0xfff0) {
+ case 0xb900:
+ if (phy_read(31) == 0x4404) {
+ db->nic_type = HOMERUN_NIC;
+ program_dm9801(phy_reg3);
+ DM9000_DBG("found homerun NIC\n");
+ } else {
+ db->nic_type = LONGRUN_NIC;
+ DM9000_DBG("found longrun NIC\n");
+ program_dm9802();
+ }
+ break;
+ default:
+ db->nic_type = FASTETHER_NIC;
+ break;
+ }
+ DM9000_iow(DM9000_NCR, 0);
+}
+
+/* General Purpose dm9000 reset routine */
+static void
+dm9000_reset(void)
+{
+ DM9000_DBG("resetting\n");
+ DM9000_iow(DM9000_NCR, NCR_RST);
+ udelay(1000); /* delay 1ms */
+}
+
+/* Initilize dm9000 board
+*/
+int
+eth_init(bd_t * bd)
+{
+ int i, oft, lnk;
+ DM9000_DBG("eth_init()\n");
+
+ /* RESET device */
+ dm9000_reset();
+ dm9000_probe();
+
+ /* NIC Type: FASTETHER, HOMERUN, LONGRUN */
+ identify_nic();
+
+ /* GPIO0 on pre-activate PHY */
+ DM9000_iow(DM9000_GPR, 0x00); /*REG_1F bit0 activate phyxcer */
+
+ /* Set PHY */
+ set_PHY_mode();
+
+ /* Program operating register */
+ DM9000_iow(DM9000_NCR, 0x0); /* only intern phy supported by now */
+ DM9000_iow(DM9000_TCR, 0); /* TX Polling clear */
+ DM9000_iow(DM9000_BPTR, 0x3f); /* Less 3Kb, 200us */
+ DM9000_iow(DM9000_FCTR, FCTR_HWOT(3) | FCTR_LWOT(8)); /* Flow Control : High/Low Water */
+ DM9000_iow(DM9000_FCR, 0x0); /* SH FIXME: This looks strange! Flow Control */
+ DM9000_iow(DM9000_SMCR, 0); /* Special Mode */
+ DM9000_iow(DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END); /* clear TX status */
+ DM9000_iow(DM9000_ISR, 0x0f); /* Clear interrupt status */
+
+ /* Set Node address */
+ for (i = 0; i < 6; i++)
+ ((u16 *) bd->bi_enetaddr)[i] = read_srom_word(i);
+
+ if (is_zero_ether_addr(bd->bi_enetaddr) ||
+ is_multicast_ether_addr(bd->bi_enetaddr)) {
+ /* try reading from environment */
+ u8 i;
+ char *s, *e;
+ s = getenv ("ethaddr");
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enetaddr[i] = s ?
+ simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+ }
+
+ printf("MAC: %02x:%02x:%02x:%02x:%02x:%02x\n", bd->bi_enetaddr[0],
+ bd->bi_enetaddr[1], bd->bi_enetaddr[2], bd->bi_enetaddr[3],
+ bd->bi_enetaddr[4], bd->bi_enetaddr[5]);
+ for (i = 0, oft = 0x10; i < 6; i++, oft++)
+ DM9000_iow(oft, bd->bi_enetaddr[i]);
+ for (i = 0, oft = 0x16; i < 8; i++, oft++)
+ DM9000_iow(oft, 0xff);
+
+ /* read back mac, just to be sure */
+ for (i = 0, oft = 0x10; i < 6; i++, oft++)
+ DM9000_DBG("%02x:", DM9000_ior(oft));
+ DM9000_DBG("\n");
+
+ /* Activate DM9000 */
+ DM9000_iow(DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN); /* RX enable */
+ DM9000_iow(DM9000_IMR, IMR_PAR); /* Enable TX/RX interrupt mask */
+ i = 0;
+ while (!(phy_read(1) & 0x20)) { /* autonegation complete bit */
+ udelay(1000);
+ i++;
+ if (i == 10000) {
+ printf("could not establish link\n");
+ return 0;
+ }
+ }
+
+ /* see what we've got */
+ lnk = phy_read(17) >> 12;
+ printf("operating at ");
+ switch (lnk) {
+ case 1:
+ printf("10M half duplex ");
+ break;
+ case 2:
+ printf("10M full duplex ");
+ break;
+ case 4:
+ printf("100M half duplex ");
+ break;
+ case 8:
+ printf("100M full duplex ");
+ break;
+ default:
+ printf("unknown: %d ", lnk);
+ break;
+ }
+ printf("mode\n");
+ return 0;
+}
+
+/*
+ Hardware start transmission.
+ Send a packet to media from the upper layer.
+*/
+int
+eth_send(volatile void *packet, int length)
+{
+ char *data_ptr;
+ u32 tmplen, i;
+ int tmo;
+ DM9000_DBG("eth_send: length: %d\n", length);
+ for (i = 0; i < length; i++) {
+ if (i % 8 == 0)
+ DM9000_DBG("\nSend: 02x: ", i);
+ DM9000_DBG("%02x ", ((unsigned char *) packet)[i]);
+ } DM9000_DBG("\n");
+
+ /* Move data to DM9000 TX RAM */
+ data_ptr = (char *) packet;
+ DM9000_outb(DM9000_MWCMD, DM9000_IO);
+
+#ifdef CONFIG_DM9000_USE_8BIT
+ /* Byte mode */
+ for (i = 0; i < length; i++)
+ DM9000_outb((data_ptr[i] & 0xff), DM9000_DATA);
+
+#endif /* */
+#ifdef CONFIG_DM9000_USE_16BIT
+ tmplen = (length + 1) / 2;
+ for (i = 0; i < tmplen; i++)
+ DM9000_outw(((u16 *) data_ptr)[i], DM9000_DATA);
+
+#endif /* */
+#ifdef CONFIG_DM9000_USE_32BIT
+ tmplen = (length + 3) / 4;
+ for (i = 0; i < tmplen; i++)
+ DM9000_outl(((u32 *) data_ptr)[i], DM9000_DATA);
+
+#endif /* */
+
+ /* Set TX length to DM9000 */
+ DM9000_iow(DM9000_TXPLL, length & 0xff);
+ DM9000_iow(DM9000_TXPLH, (length >> 8) & 0xff);
+
+ /* Issue TX polling command */
+ DM9000_iow(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
+
+ /* wait for end of transmission */
+ tmo = get_timer(0) + 5 * CFG_HZ;
+ while (DM9000_ior(DM9000_TCR) & TCR_TXREQ) {
+ if (get_timer(0) >= tmo) {
+ printf("transmission timeout\n");
+ break;
+ }
+ }
+ DM9000_DBG("transmit done\n\n");
+ return 0;
+}
+
+/*
+ Stop the interface.
+ The interface is stopped when it is brought.
+*/
+void
+eth_halt(void)
+{
+ DM9000_DBG("eth_halt\n");
+
+ /* RESET devie */
+ phy_write(0, 0x8000); /* PHY RESET */
+ DM9000_iow(DM9000_GPR, 0x01); /* Power-Down PHY */
+ DM9000_iow(DM9000_IMR, 0x80); /* Disable all interrupt */
+ DM9000_iow(DM9000_RCR, 0x00); /* Disable RX */
+}
+
+/*
+ Received a packet and pass to upper layer
+*/
+int
+eth_rx(void)
+{
+ u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
+ u16 RxStatus, RxLen = 0;
+ u32 tmplen, i;
+#ifdef CONFIG_DM9000_USE_32BIT
+ u32 tmpdata;
+#endif
+
+ /* Check packet ready or not */
+ DM9000_ior(DM9000_MRCMDX); /* Dummy read */
+ rxbyte = DM9000_inb(DM9000_DATA); /* Got most updated data */
+ if (rxbyte == 0)
+ return 0;
+
+ /* Status check: this byte must be 0 or 1 */
+ if (rxbyte > 1) {
+ DM9000_iow(DM9000_RCR, 0x00); /* Stop Device */
+ DM9000_iow(DM9000_ISR, 0x80); /* Stop INT request */
+ DM9000_DBG("rx status check: %d\n", rxbyte);
+ }
+ DM9000_DBG("receiving packet\n");
+
+ /* A packet ready now & Get status/length */
+ DM9000_outb(DM9000_MRCMD, DM9000_IO);
+
+#ifdef CONFIG_DM9000_USE_8BIT
+ RxStatus = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
+ RxLen = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
+
+#endif /* */
+#ifdef CONFIG_DM9000_USE_16BIT
+ RxStatus = DM9000_inw(DM9000_DATA);
+ RxLen = DM9000_inw(DM9000_DATA);
+
+#endif /* */
+#ifdef CONFIG_DM9000_USE_32BIT
+ tmpdata = DM9000_inl(DM9000_DATA);
+ RxStatus = tmpdata;
+ RxLen = tmpdata >> 16;
+
+#endif /* */
+ DM9000_DBG("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
+
+ /* Move data from DM9000 */
+ /* Read received packet from RX SRAM */
+#ifdef CONFIG_DM9000_USE_8BIT
+ for (i = 0; i < RxLen; i++)
+ rdptr[i] = DM9000_inb(DM9000_DATA);
+
+#endif /* */
+#ifdef CONFIG_DM9000_USE_16BIT
+ tmplen = (RxLen + 1) / 2;
+ for (i = 0; i < tmplen; i++)
+ ((u16 *) rdptr)[i] = DM9000_inw(DM9000_DATA);
+
+#endif /* */
+#ifdef CONFIG_DM9000_USE_32BIT
+ tmplen = (RxLen + 3) / 4;
+ for (i = 0; i < tmplen; i++)
+ ((u32 *) rdptr)[i] = DM9000_inl(DM9000_DATA);
+
+#endif /* */
+ if ((RxStatus & 0xbf00) || (RxLen < 0x40)
+ || (RxLen > DM9000_PKT_MAX)) {
+ if (RxStatus & 0x100) {
+ printf("rx fifo error\n");
+ }
+ if (RxStatus & 0x200) {
+ printf("rx crc error\n");
+ }
+ if (RxStatus & 0x8000) {
+ printf("rx length error\n");
+ }
+ if (RxLen > DM9000_PKT_MAX) {
+ printf("rx length too big\n");
+ dm9000_reset();
+ }
+ } else {
+
+ /* Pass to upper layer */
+ DM9000_DBG("passing packet to upper layer\n");
+ NetReceive(NetRxPackets[0], RxLen);
+ return RxLen;
+ }
+ return 0;
+}
+
+/*
+ Read a word data from SROM
+*/
+u16
+read_srom_word(int offset)
+{
+ DM9000_iow(DM9000_EPAR, offset);
+ DM9000_iow(DM9000_EPCR, 0x4);
+ udelay(8000);
+ DM9000_iow(DM9000_EPCR, 0x0);
+ return (DM9000_ior(DM9000_EPDRL) + (DM9000_ior(DM9000_EPDRH) << 8));
+}
+
+void
+write_srom_word(int offset, u16 val)
+{
+ DM9000_iow(DM9000_EPAR, offset);
+ DM9000_iow(DM9000_EPDRH, ((val >> 8) & 0xff));
+ DM9000_iow(DM9000_EPDRL, (val & 0xff));
+ DM9000_iow(DM9000_EPCR, 0x12);
+ udelay(8000);
+ DM9000_iow(DM9000_EPCR, 0);
+}
+
+
+/*
+ Read a byte from I/O port
+*/
+static u8
+DM9000_ior(int reg)
+{
+ DM9000_outb(reg, DM9000_IO);
+ return DM9000_inb(DM9000_DATA);
+}
+
+/*
+ Write a byte to I/O port
+*/
+static void
+DM9000_iow(int reg, u8 value)
+{
+ DM9000_outb(reg, DM9000_IO);
+ DM9000_outb(value, DM9000_DATA);
+}
+
+/*
+ Read a word from phyxcer
+*/
+static u16
+phy_read(int reg)
+{
+ u16 val;
+
+ /* Fill the phyxcer register into REG_0C */
+ DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
+ DM9000_iow(DM9000_EPCR, 0xc); /* Issue phyxcer read command */
+ udelay(100); /* Wait read complete */
+ DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer read command */
+ val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
+
+ /* The read data keeps on REG_0D & REG_0E */
+ DM9000_DBG("phy_read(%d): %d\n", reg, val);
+ return val;
+}
+
+/*
+ Write a word to phyxcer
+*/
+static void
+phy_write(int reg, u16 value)
+{
+
+ /* Fill the phyxcer register into REG_0C */
+ DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Fill the written data into REG_0D & REG_0E */
+ DM9000_iow(DM9000_EPDRL, (value & 0xff));
+ DM9000_iow(DM9000_EPDRH, ((value >> 8) & 0xff));
+ DM9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */
+ udelay(500); /* Wait write complete */
+ DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */
+ DM9000_DBG("phy_write(reg:%d, value:%d)\n", reg, value);
+}
+#endif /* CONFIG_DRIVER_DM9000 */
diff --git a/drivers/net/dm9000x.h b/drivers/net/dm9000x.h
new file mode 100644
index 0000000..f47ff8c
--- /dev/null
+++ b/drivers/net/dm9000x.h
@@ -0,0 +1,119 @@
+/*
+ * dm9000 Ethernet
+ */
+
+#ifdef CONFIG_DRIVER_DM9000
+
+#define DM9000_ID 0x90000A46
+#define DM9000_PKT_MAX 1536 /* Received packet max size */
+#define DM9000_PKT_RDY 0x01 /* Packet ready to receive */
+
+/* although the registers are 16 bit, they are 32-bit aligned.
+ */
+
+#define DM9000_NCR 0x00
+#define DM9000_NSR 0x01
+#define DM9000_TCR 0x02
+#define DM9000_TSR1 0x03
+#define DM9000_TSR2 0x04
+#define DM9000_RCR 0x05
+#define DM9000_RSR 0x06
+#define DM9000_ROCR 0x07
+#define DM9000_BPTR 0x08
+#define DM9000_FCTR 0x09
+#define DM9000_FCR 0x0A
+#define DM9000_EPCR 0x0B
+#define DM9000_EPAR 0x0C
+#define DM9000_EPDRL 0x0D
+#define DM9000_EPDRH 0x0E
+#define DM9000_WCR 0x0F
+
+#define DM9000_PAR 0x10
+#define DM9000_MAR 0x16
+
+#define DM9000_GPCR 0x1e
+#define DM9000_GPR 0x1f
+#define DM9000_TRPAL 0x22
+#define DM9000_TRPAH 0x23
+#define DM9000_RWPAL 0x24
+#define DM9000_RWPAH 0x25
+
+#define DM9000_VIDL 0x28
+#define DM9000_VIDH 0x29
+#define DM9000_PIDL 0x2A
+#define DM9000_PIDH 0x2B
+
+#define DM9000_CHIPR 0x2C
+#define DM9000_SMCR 0x2F
+
+#define DM9000_PHY 0x40 /* PHY address 0x01 */
+
+#define DM9000_MRCMDX 0xF0
+#define DM9000_MRCMD 0xF2
+#define DM9000_MRRL 0xF4
+#define DM9000_MRRH 0xF5
+#define DM9000_MWCMDX 0xF6
+#define DM9000_MWCMD 0xF8
+#define DM9000_MWRL 0xFA
+#define DM9000_MWRH 0xFB
+#define DM9000_TXPLL 0xFC
+#define DM9000_TXPLH 0xFD
+#define DM9000_ISR 0xFE
+#define DM9000_IMR 0xFF
+
+#define NCR_EXT_PHY (1<<7)
+#define NCR_WAKEEN (1<<6)
+#define NCR_FCOL (1<<4)
+#define NCR_FDX (1<<3)
+#define NCR_LBK (3<<1)
+#define NCR_RST (1<<0)
+
+#define NSR_SPEED (1<<7)
+#define NSR_LINKST (1<<6)
+#define NSR_WAKEST (1<<5)
+#define NSR_TX2END (1<<3)
+#define NSR_TX1END (1<<2)
+#define NSR_RXOV (1<<1)
+
+#define TCR_TJDIS (1<<6)
+#define TCR_EXCECM (1<<5)
+#define TCR_PAD_DIS2 (1<<4)
+#define TCR_CRC_DIS2 (1<<3)
+#define TCR_PAD_DIS1 (1<<2)
+#define TCR_CRC_DIS1 (1<<1)
+#define TCR_TXREQ (1<<0)
+
+#define TSR_TJTO (1<<7)
+#define TSR_LC (1<<6)
+#define TSR_NC (1<<5)
+#define TSR_LCOL (1<<4)
+#define TSR_COL (1<<3)
+#define TSR_EC (1<<2)
+
+#define RCR_WTDIS (1<<6)
+#define RCR_DIS_LONG (1<<5)
+#define RCR_DIS_CRC (1<<4)
+#define RCR_ALL (1<<3)
+#define RCR_RUNT (1<<2)
+#define RCR_PRMSC (1<<1)
+#define RCR_RXEN (1<<0)
+
+#define RSR_RF (1<<7)
+#define RSR_MF (1<<6)
+#define RSR_LCS (1<<5)
+#define RSR_RWTO (1<<4)
+#define RSR_PLE (1<<3)
+#define RSR_AE (1<<2)
+#define RSR_CE (1<<1)
+#define RSR_FOE (1<<0)
+
+#define FCTR_HWOT(ot) (( ot & 0xf ) << 4 )
+#define FCTR_LWOT(ot) ( ot & 0xf )
+
+#define IMR_PAR (1<<7)
+#define IMR_ROOM (1<<3)
+#define IMR_ROM (1<<2)
+#define IMR_PTM (1<<1)
+#define IMR_PRM (1<<0)
+
+#endif
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
new file mode 100644
index 0000000..f0741da
--- /dev/null
+++ b/drivers/net/e1000.c
@@ -0,0 +1,3016 @@
+/**************************************************************************
+Inter Pro 1000 for ppcboot/das-u-boot
+Drivers are port from Intel's Linux driver e1000-4.3.15
+and from Etherboot pro 1000 driver by mrakes at vivato dot net
+tested on both gig copper and gig fiber boards
+***************************************************************************/
+/*******************************************************************************
+
+
+ Copyright(c) 1999 - 2002 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2 of the License, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+/*
+ * Copyright (C) Archway Digital Solutions.
+ *
+ * written by Chrsitopher Li <cli at arcyway dot com> or <chrisl at gnuchina dot org>
+ * 2/9/2002
+ *
+ * Copyright (C) Linux Networx.
+ * Massive upgrade to work with the new intel gigabit NICs.
+ * <ebiederman at lnxi dot com>
+ */
+
+#include "e1000.h"
+
+#if defined(CONFIG_CMD_NET) \
+ && defined(CONFIG_NET_MULTI) && defined(CONFIG_E1000)
+
+#define TOUT_LOOP 100000
+
+#undef virt_to_bus
+#define virt_to_bus(x) ((unsigned long)x)
+#define bus_to_phys(devno, a) pci_mem_to_phys(devno, a)
+#define mdelay(n) udelay((n)*1000)
+
+#define E1000_DEFAULT_PBA 0x00000030
+
+/* NIC specific static variables go here */
+
+static char tx_pool[128 + 16];
+static char rx_pool[128 + 16];
+static char packet[2096];
+
+static struct e1000_tx_desc *tx_base;
+static struct e1000_rx_desc *rx_base;
+
+static int tx_tail;
+static int rx_tail, rx_last;
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82542},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82543GC_FIBER},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82543GC_COPPER},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82544EI_COPPER},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82544EI_FIBER},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82544GC_COPPER},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82544GC_LOM},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82540EM},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82545EM_COPPER},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82546EB_COPPER},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82545EM_FIBER},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82546EB_FIBER},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82540EM_LOM},
+};
+
+/* Function forward declarations */
+static int e1000_setup_link(struct eth_device *nic);
+static int e1000_setup_fiber_link(struct eth_device *nic);
+static int e1000_setup_copper_link(struct eth_device *nic);
+static int e1000_phy_setup_autoneg(struct e1000_hw *hw);
+static void e1000_config_collision_dist(struct e1000_hw *hw);
+static int e1000_config_mac_to_phy(struct e1000_hw *hw);
+static int e1000_config_fc_after_link_up(struct e1000_hw *hw);
+static int e1000_check_for_link(struct eth_device *nic);
+static int e1000_wait_autoneg(struct e1000_hw *hw);
+static void e1000_get_speed_and_duplex(struct e1000_hw *hw, uint16_t * speed,
+ uint16_t * duplex);
+static int e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
+ uint16_t * phy_data);
+static int e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
+ uint16_t phy_data);
+static void e1000_phy_hw_reset(struct e1000_hw *hw);
+static int e1000_phy_reset(struct e1000_hw *hw);
+static int e1000_detect_gig_phy(struct e1000_hw *hw);
+
+#define E1000_WRITE_REG(a, reg, value) (writel((value), ((a)->hw_addr + E1000_##reg)))
+#define E1000_READ_REG(a, reg) (readl((a)->hw_addr + E1000_##reg))
+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) (\
+ writel((value), ((a)->hw_addr + E1000_##reg + ((offset) << 2))))
+#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
+ readl((a)->hw_addr + E1000_##reg + ((offset) << 2)))
+#define E1000_WRITE_FLUSH(a) {uint32_t x; x = E1000_READ_REG(a, STATUS);}
+
+#ifndef CONFIG_AP1000 /* remove for warnings */
+/******************************************************************************
+ * Raises the EEPROM's clock input.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * eecd - EECD's current value
+ *****************************************************************************/
+static void
+e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t * eecd)
+{
+ /* Raise the clock input to the EEPROM (by setting the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd = *eecd | E1000_EECD_SK;
+ E1000_WRITE_REG(hw, EECD, *eecd);
+ E1000_WRITE_FLUSH(hw);
+ udelay(50);
+}
+
+/******************************************************************************
+ * Lowers the EEPROM's clock input.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * eecd - EECD's current value
+ *****************************************************************************/
+static void
+e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t * eecd)
+{
+ /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd = *eecd & ~E1000_EECD_SK;
+ E1000_WRITE_REG(hw, EECD, *eecd);
+ E1000_WRITE_FLUSH(hw);
+ udelay(50);
+}
+
+/******************************************************************************
+ * Shift data bits out to the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * data - data to send to the EEPROM
+ * count - number of bits to shift out
+ *****************************************************************************/
+static void
+e1000_shift_out_ee_bits(struct e1000_hw *hw, uint16_t data, uint16_t count)
+{
+ uint32_t eecd;
+ uint32_t mask;
+
+ /* We need to shift "count" bits out to the EEPROM. So, value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01 << (count - 1);
+ eecd = E1000_READ_REG(hw, EECD);
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ do {
+ /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
+ * and then raising and then lowering the clock (the SK bit controls
+ * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
+ * by setting "DI" to "0" and then raising and then lowering the clock.
+ */
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ E1000_WRITE_REG(hw, EECD, eecd);
+ E1000_WRITE_FLUSH(hw);
+
+ udelay(50);
+
+ e1000_raise_ee_clk(hw, &eecd);
+ e1000_lower_ee_clk(hw, &eecd);
+
+ mask = mask >> 1;
+
+ } while (mask);
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eecd &= ~E1000_EECD_DI;
+ E1000_WRITE_REG(hw, EECD, eecd);
+}
+
+/******************************************************************************
+ * Shift data bits in from the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static uint16_t
+e1000_shift_in_ee_bits(struct e1000_hw *hw)
+{
+ uint32_t eecd;
+ uint32_t i;
+ uint16_t data;
+
+ /* In order to read a register from the EEPROM, we need to shift 16 bits
+ * in from the EEPROM. Bits are "shifted in" by raising the clock input to
+ * the EEPROM (setting the SK bit), and then reading the value of the "DO"
+ * bit. During this "shifting in" process the "DI" bit should always be
+ * clear..
+ */
+
+ eecd = E1000_READ_REG(hw, EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < 16; i++) {
+ data = data << 1;
+ e1000_raise_ee_clk(hw, &eecd);
+
+ eecd = E1000_READ_REG(hw, EECD);
+
+ eecd &= ~(E1000_EECD_DI);
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ e1000_lower_ee_clk(hw, &eecd);
+ }
+
+ return data;
+}
+
+/******************************************************************************
+ * Prepares EEPROM for access
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
+ * function should be called before issuing a command to the EEPROM.
+ *****************************************************************************/
+static void
+e1000_setup_eeprom(struct e1000_hw *hw)
+{
+ uint32_t eecd;
+
+ eecd = E1000_READ_REG(hw, EECD);
+
+ /* Clear SK and DI */
+ eecd &= ~(E1000_EECD_SK | E1000_EECD_DI);
+ E1000_WRITE_REG(hw, EECD, eecd);
+
+ /* Set CS */
+ eecd |= E1000_EECD_CS;
+ E1000_WRITE_REG(hw, EECD, eecd);
+}
+
+/******************************************************************************
+ * Returns EEPROM to a "standby" state
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+e1000_standby_eeprom(struct e1000_hw *hw)
+{
+ uint32_t eecd;
+
+ eecd = E1000_READ_REG(hw, EECD);
+
+ /* Deselct EEPROM */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ E1000_WRITE_REG(hw, EECD, eecd);
+ E1000_WRITE_FLUSH(hw);
+ udelay(50);
+
+ /* Clock high */
+ eecd |= E1000_EECD_SK;
+ E1000_WRITE_REG(hw, EECD, eecd);
+ E1000_WRITE_FLUSH(hw);
+ udelay(50);
+
+ /* Select EEPROM */
+ eecd |= E1000_EECD_CS;
+ E1000_WRITE_REG(hw, EECD, eecd);
+ E1000_WRITE_FLUSH(hw);
+ udelay(50);
+
+ /* Clock low */
+ eecd &= ~E1000_EECD_SK;
+ E1000_WRITE_REG(hw, EECD, eecd);
+ E1000_WRITE_FLUSH(hw);
+ udelay(50);
+}
+
+/******************************************************************************
+ * Reads a 16 bit word from the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ *****************************************************************************/
+static int
+e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset, uint16_t * data)
+{
+ uint32_t eecd;
+ uint32_t i = 0;
+ int large_eeprom = FALSE;
+
+ /* Request EEPROM Access */
+ if (hw->mac_type > e1000_82544) {
+ eecd = E1000_READ_REG(hw, EECD);
+ if (eecd & E1000_EECD_SIZE)
+ large_eeprom = TRUE;
+ eecd |= E1000_EECD_REQ;
+ E1000_WRITE_REG(hw, EECD, eecd);
+ eecd = E1000_READ_REG(hw, EECD);
+ while ((!(eecd & E1000_EECD_GNT)) && (i < 100)) {
+ i++;
+ udelay(10);
+ eecd = E1000_READ_REG(hw, EECD);
+ }
+ if (!(eecd & E1000_EECD_GNT)) {
+ eecd &= ~E1000_EECD_REQ;
+ E1000_WRITE_REG(hw, EECD, eecd);
+ DEBUGOUT("Could not acquire EEPROM grant\n");
+ return -E1000_ERR_EEPROM;
+ }
+ }
+
+ /* Prepare the EEPROM for reading */
+ e1000_setup_eeprom(hw);
+
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE, 3);
+ e1000_shift_out_ee_bits(hw, offset, (large_eeprom) ? 8 : 6);
+
+ /* Read the data */
+ *data = e1000_shift_in_ee_bits(hw);
+
+ /* End this read operation */
+ e1000_standby_eeprom(hw);
+
+ /* Stop requesting EEPROM access */
+ if (hw->mac_type > e1000_82544) {
+ eecd = E1000_READ_REG(hw, EECD);
+ eecd &= ~E1000_EECD_REQ;
+ E1000_WRITE_REG(hw, EECD, eecd);
+ }
+
+ return 0;
+}
+
+#if 0
+static void
+e1000_eeprom_cleanup(struct e1000_hw *hw)
+{
+ uint32_t eecd;
+
+ eecd = E1000_READ_REG(hw, EECD);
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
+ E1000_WRITE_REG(hw, EECD, eecd);
+ e1000_raise_ee_clk(hw, &eecd);
+ e1000_lower_ee_clk(hw, &eecd);
+}
+
+static uint16_t
+e1000_wait_eeprom_done(struct e1000_hw *hw)
+{
+ uint32_t eecd;
+ uint32_t i;
+
+ e1000_standby_eeprom(hw);
+ for (i = 0; i < 200; i++) {
+ eecd = E1000_READ_REG(hw, EECD);
+ if (eecd & E1000_EECD_DO)
+ return (TRUE);
+ udelay(5);
+ }
+ return (FALSE);
+}
+
+static int
+e1000_write_eeprom(struct e1000_hw *hw, uint16_t Reg, uint16_t Data)
+{
+ uint32_t eecd;
+ int large_eeprom = FALSE;
+ int i = 0;
+
+ /* Request EEPROM Access */
+ if (hw->mac_type > e1000_82544) {
+ eecd = E1000_READ_REG(hw, EECD);
+ if (eecd & E1000_EECD_SIZE)
+ large_eeprom = TRUE;
+ eecd |= E1000_EECD_REQ;
+ E1000_WRITE_REG(hw, EECD, eecd);
+ eecd = E1000_READ_REG(hw, EECD);
+ while ((!(eecd & E1000_EECD_GNT)) && (i < 100)) {
+ i++;
+ udelay(5);
+ eecd = E1000_READ_REG(hw, EECD);
+ }
+ if (!(eecd & E1000_EECD_GNT)) {
+ eecd &= ~E1000_EECD_REQ;
+ E1000_WRITE_REG(hw, EECD, eecd);
+ DEBUGOUT("Could not acquire EEPROM grant\n");
+ return FALSE;
+ }
+ }
+ e1000_setup_eeprom(hw);
+ e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE, 5);
+ e1000_shift_out_ee_bits(hw, Reg, (large_eeprom) ? 6 : 4);
+ e1000_standby_eeprom(hw);
+ e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE, 3);
+ e1000_shift_out_ee_bits(hw, Reg, (large_eeprom) ? 8 : 6);
+ e1000_shift_out_ee_bits(hw, Data, 16);
+ if (!e1000_wait_eeprom_done(hw)) {
+ return FALSE;
+ }
+ e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE, 5);
+ e1000_shift_out_ee_bits(hw, Reg, (large_eeprom) ? 6 : 4);
+ e1000_eeprom_cleanup(hw);
+
+ /* Stop requesting EEPROM access */
+ if (hw->mac_type > e1000_82544) {
+ eecd = E1000_READ_REG(hw, EECD);
+ eecd &= ~E1000_EECD_REQ;
+ E1000_WRITE_REG(hw, EECD, eecd);
+ }
+ i = 0;
+ eecd = E1000_READ_REG(hw, EECD);
+ while (((eecd & E1000_EECD_GNT)) && (i < 500)) {
+ i++;
+ udelay(10);
+ eecd = E1000_READ_REG(hw, EECD);
+ }
+ if ((eecd & E1000_EECD_GNT)) {
+ DEBUGOUT("Could not release EEPROM grant\n");
+ }
+ return TRUE;
+}
+#endif
+
+/******************************************************************************
+ * Verifies that the EEPROM has a valid checksum
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Reads the first 64 16 bit words of the EEPROM and sums the values read.
+ * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * valid.
+ *****************************************************************************/
+static int
+e1000_validate_eeprom_checksum(struct eth_device *nic)
+{
+ struct e1000_hw *hw = nic->priv;
+ uint16_t checksum = 0;
+ uint16_t i, eeprom_data;
+
+ DEBUGFUNC();
+
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if (e1000_read_eeprom(hw, i, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+
+ if (checksum == (uint16_t) EEPROM_SUM) {
+ return 0;
+ } else {
+ DEBUGOUT("EEPROM Checksum Invalid\n");
+ return -E1000_ERR_EEPROM;
+ }
+}
+#endif /* #ifndef CONFIG_AP1000 */
+
+/******************************************************************************
+ * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
+ * second function of dual function devices
+ *
+ * nic - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static int
+e1000_read_mac_addr(struct eth_device *nic)
+{
+#ifndef CONFIG_AP1000
+ struct e1000_hw *hw = nic->priv;
+ uint16_t offset;
+ uint16_t eeprom_data;
+ int i;
+
+ DEBUGFUNC();
+
+ for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
+ offset = i >> 1;
+ if (e1000_read_eeprom(hw, offset, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ nic->enetaddr[i] = eeprom_data & 0xff;
+ nic->enetaddr[i + 1] = (eeprom_data >> 8) & 0xff;
+ }
+ if ((hw->mac_type == e1000_82546) &&
+ (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) {
+ /* Invert the last bit if this is the second device */
+ nic->enetaddr[5] += 1;
+ }
+#else
+ /*
+ * The AP1000's e1000 has no eeprom; the MAC address is stored in the
+ * environment variables. Currently this does not support the addition
+ * of a PMC e1000 card, which is certainly a possibility, so this should
+ * be updated to properly use the env variable only for the onboard e1000
+ */
+
+ int ii;
+ char *s, *e;
+
+ DEBUGFUNC();
+
+ s = getenv ("ethaddr");
+ if (s == NULL){
+ return -E1000_ERR_EEPROM;
+ }
+ else{
+ for(ii = 0; ii < 6; ii++) {
+ nic->enetaddr[ii] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s){
+ s = (*e) ? e + 1 : e;
+ }
+ }
+ }
+#endif
+ return 0;
+}
+
+/******************************************************************************
+ * Initializes receive address filters.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive addresss registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ *****************************************************************************/
+static void
+e1000_init_rx_addrs(struct eth_device *nic)
+{
+ struct e1000_hw *hw = nic->priv;
+ uint32_t i;
+ uint32_t addr_low;
+ uint32_t addr_high;
+
+ DEBUGFUNC();
+
+ /* Setup the receive address. */
+ DEBUGOUT("Programming MAC Address into RAR[0]\n");
+ addr_low = (nic->enetaddr[0] |
+ (nic->enetaddr[1] << 8) |
+ (nic->enetaddr[2] << 16) | (nic->enetaddr[3] << 24));
+
+ addr_high = (nic->enetaddr[4] | (nic->enetaddr[5] << 8) | E1000_RAH_AV);
+
+ E1000_WRITE_REG_ARRAY(hw, RA, 0, addr_low);
+ E1000_WRITE_REG_ARRAY(hw, RA, 1, addr_high);
+
+ /* Zero out the other 15 receive addresses. */
+ DEBUGOUT("Clearing RAR[1-15]\n");
+ for (i = 1; i < E1000_RAR_ENTRIES; i++) {
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ }
+}
+
+/******************************************************************************
+ * Clears the VLAN filer table
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+e1000_clear_vfta(struct e1000_hw *hw)
+{
+ uint32_t offset;
+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++)
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, 0);
+}
+
+/******************************************************************************
+ * Set the mac type member in the hw struct.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static int
+e1000_set_mac_type(struct e1000_hw *hw)
+{
+ DEBUGFUNC();
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82542:
+ switch (hw->revision_id) {
+ case E1000_82542_2_0_REV_ID:
+ hw->mac_type = e1000_82542_rev2_0;
+ break;
+ case E1000_82542_2_1_REV_ID:
+ hw->mac_type = e1000_82542_rev2_1;
+ break;
+ default:
+ /* Invalid 82542 revision ID */
+ return -E1000_ERR_MAC_TYPE;
+ }
+ break;
+ case E1000_DEV_ID_82543GC_FIBER:
+ case E1000_DEV_ID_82543GC_COPPER:
+ hw->mac_type = e1000_82543;
+ break;
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ hw->mac_type = e1000_82544;
+ break;
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ hw->mac_type = e1000_82540;
+ break;
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ hw->mac_type = e1000_82545;
+ break;
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ hw->mac_type = e1000_82546;
+ break;
+ default:
+ /* Should never have loaded on this device */
+ return -E1000_ERR_MAC_TYPE;
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+void
+e1000_reset_hw(struct e1000_hw *hw)
+{
+ uint32_t ctrl;
+ uint32_t ctrl_ext;
+ uint32_t icr;
+ uint32_t manc;
+
+ DEBUGFUNC();
+
+ /* For 82542 (rev 2.0), disable MWI before issuing a device reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ pci_write_config_word(hw->pdev, PCI_COMMAND,
+ hw->
+ pci_cmd_word & ~PCI_COMMAND_INVALIDATE);
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ DEBUGOUT("Masking off all interrupts\n");
+ E1000_WRITE_REG(hw, IMC, 0xffffffff);
+
+ /* Disable the Transmit and Receive units. Then delay to allow
+ * any pending transactions to complete before we hit the MAC with
+ * the global reset.
+ */
+ E1000_WRITE_REG(hw, RCTL, 0);
+ E1000_WRITE_REG(hw, TCTL, E1000_TCTL_PSP);
+ E1000_WRITE_FLUSH(hw);
+
+ /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
+ hw->tbi_compatibility_on = FALSE;
+
+ /* Delay to allow any outstanding PCI transactions to complete before
+ * resetting the device
+ */
+ mdelay(10);
+
+ /* Issue a global reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA, and link units. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ DEBUGOUT("Issuing a global reset to MAC\n");
+ ctrl = E1000_READ_REG(hw, CTRL);
+
+#if 0
+ if (hw->mac_type > e1000_82543)
+ E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST));
+ else
+#endif
+ E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST));
+
+ /* Force a reload from the EEPROM if necessary */
+ if (hw->mac_type < e1000_82540) {
+ /* Wait for reset to complete */
+ udelay(10);
+ ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH(hw);
+ /* Wait for EEPROM reload */
+ mdelay(2);
+ } else {
+ /* Wait for EEPROM reload (it happens automatically) */
+ mdelay(4);
+ /* Dissable HW ARPs on ASF enabled adapters */
+ manc = E1000_READ_REG(hw, MANC);
+ manc &= ~(E1000_MANC_ARP_EN);
+ E1000_WRITE_REG(hw, MANC, manc);
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ DEBUGOUT("Masking off all interrupts\n");
+ E1000_WRITE_REG(hw, IMC, 0xffffffff);
+
+ /* Clear any pending interrupt events. */
+ icr = E1000_READ_REG(hw, ICR);
+
+ /* If MWI was previously enabled, reenable it. */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ pci_write_config_word(hw->pdev, PCI_COMMAND, hw->pci_cmd_word);
+ }
+}
+
+/******************************************************************************
+ * Performs basic configuration of the adapter.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Assumes that the controller has previously been reset and is in a
+ * post-reset uninitialized state. Initializes the receive address registers,
+ * multicast table, and VLAN filter table. Calls routines to setup link
+ * configuration and flow control settings. Clears all on-chip counters. Leaves
+ * the transmit and receive units disabled and uninitialized.
+ *****************************************************************************/
+static int
+e1000_init_hw(struct eth_device *nic)
+{
+ struct e1000_hw *hw = nic->priv;
+ uint32_t ctrl, status;
+ uint32_t i;
+ int32_t ret_val;
+ uint16_t pcix_cmd_word;
+ uint16_t pcix_stat_hi_word;
+ uint16_t cmd_mmrbc;
+ uint16_t stat_mmrbc;
+ e1000_bus_type bus_type = e1000_bus_type_unknown;
+
+ DEBUGFUNC();
+#if 0
+ /* Initialize Identification LED */
+ ret_val = e1000_id_led_init(hw);
+ if (ret_val < 0) {
+ DEBUGOUT("Error Initializing Identification LED\n");
+ return ret_val;
+ }
+#endif
+ /* Set the Media Type and exit with error if it is not valid. */
+ if (hw->mac_type != e1000_82543) {
+ /* tbi_compatibility is only valid on 82543 */
+ hw->tbi_compatibility_en = FALSE;
+ }
+
+ if (hw->mac_type >= e1000_82543) {
+ status = E1000_READ_REG(hw, STATUS);
+ if (status & E1000_STATUS_TBIMODE) {
+ hw->media_type = e1000_media_type_fiber;
+ /* tbi_compatibility not valid on fiber */
+ hw->tbi_compatibility_en = FALSE;
+ } else {
+ hw->media_type = e1000_media_type_copper;
+ }
+ } else {
+ /* This is an 82542 (fiber only) */
+ hw->media_type = e1000_media_type_fiber;
+ }
+
+ /* Disabling VLAN filtering. */
+ DEBUGOUT("Initializing the IEEE VLAN\n");
+ E1000_WRITE_REG(hw, VET, 0);
+
+ e1000_clear_vfta(hw);
+
+ /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ pci_write_config_word(hw->pdev, PCI_COMMAND,
+ hw->
+ pci_cmd_word & ~PCI_COMMAND_INVALIDATE);
+ E1000_WRITE_REG(hw, RCTL, E1000_RCTL_RST);
+ E1000_WRITE_FLUSH(hw);
+ mdelay(5);
+ }
+
+ /* Setup the receive address. This involves initializing all of the Receive
+ * Address Registers (RARs 0 - 15).
+ */
+ e1000_init_rx_addrs(nic);
+
+ /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ E1000_WRITE_REG(hw, RCTL, 0);
+ E1000_WRITE_FLUSH(hw);
+ mdelay(1);
+ pci_write_config_word(hw->pdev, PCI_COMMAND, hw->pci_cmd_word);
+ }
+
+ /* Zero out the Multicast HASH table */
+ DEBUGOUT("Zeroing the MTA\n");
+ for (i = 0; i < E1000_MC_TBL_SIZE; i++)
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+
+#if 0
+ /* Set the PCI priority bit correctly in the CTRL register. This
+ * determines if the adapter gives priority to receives, or if it
+ * gives equal priority to transmits and receives.
+ */
+ if (hw->dma_fairness) {
+ ctrl = E1000_READ_REG(hw, CTRL);
+ E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PRIOR);
+ }
+#endif
+ if (hw->mac_type >= e1000_82543) {
+ status = E1000_READ_REG(hw, STATUS);
+ bus_type = (status & E1000_STATUS_PCIX_MODE) ?
+ e1000_bus_type_pcix : e1000_bus_type_pci;
+ }
+ /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
+ if (bus_type == e1000_bus_type_pcix) {
+ pci_read_config_word(hw->pdev, PCIX_COMMAND_REGISTER,
+ &pcix_cmd_word);
+ pci_read_config_word(hw->pdev, PCIX_STATUS_REGISTER_HI,
+ &pcix_stat_hi_word);
+ cmd_mmrbc =
+ (pcix_cmd_word & PCIX_COMMAND_MMRBC_MASK) >>
+ PCIX_COMMAND_MMRBC_SHIFT;
+ stat_mmrbc =
+ (pcix_stat_hi_word & PCIX_STATUS_HI_MMRBC_MASK) >>
+ PCIX_STATUS_HI_MMRBC_SHIFT;
+ if (stat_mmrbc == PCIX_STATUS_HI_MMRBC_4K)
+ stat_mmrbc = PCIX_STATUS_HI_MMRBC_2K;
+ if (cmd_mmrbc > stat_mmrbc) {
+ pcix_cmd_word &= ~PCIX_COMMAND_MMRBC_MASK;
+ pcix_cmd_word |= stat_mmrbc << PCIX_COMMAND_MMRBC_SHIFT;
+ pci_write_config_word(hw->pdev, PCIX_COMMAND_REGISTER,
+ pcix_cmd_word);
+ }
+ }
+
+ /* Call a subroutine to configure the link and setup flow control. */
+ ret_val = e1000_setup_link(nic);
+
+ /* Set the transmit descriptor write-back policy */
+ if (hw->mac_type > e1000_82544) {
+ ctrl = E1000_READ_REG(hw, TXDCTL);
+ ctrl =
+ (ctrl & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB;
+ E1000_WRITE_REG(hw, TXDCTL, ctrl);
+ }
+#if 0
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ e1000_clear_hw_cntrs(hw);
+#endif
+
+ return ret_val;
+}
+
+/******************************************************************************
+ * Configures flow control and link settings.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Determines which flow control settings to use. Calls the apropriate media-
+ * specific link configuration function. Configures the flow control settings.
+ * Assuming the adapter has a valid link partner, a valid link should be
+ * established. Assumes the hardware has previously been reset and the
+ * transmitter and receiver are not enabled.
+ *****************************************************************************/
+static int
+e1000_setup_link(struct eth_device *nic)
+{
+ struct e1000_hw *hw = nic->priv;
+ uint32_t ctrl_ext;
+ int32_t ret_val;
+ uint16_t eeprom_data;
+
+ DEBUGFUNC();
+
+#ifndef CONFIG_AP1000
+ /* Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * a bit that determines whether the HW defaults to enabling or
+ * disabling auto-negotiation, and the direction of the
+ * SW defined pins. If there is no SW over-ride of the flow
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
+ if (e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+#else
+ /* we have to hardcode the proper value for our hardware. */
+ /* this value is for the 82540EM pci card used for prototyping, and it works. */
+ eeprom_data = 0xb220;
+#endif
+
+ if (hw->fc == e1000_fc_default) {
+ if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc = e1000_fc_none;
+ else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
+ EEPROM_WORD0F_ASM_DIR)
+ hw->fc = e1000_fc_tx_pause;
+ else
+ hw->fc = e1000_fc_full;
+ }
+
+ /* We want to save off the original Flow Control configuration just
+ * in case we get disconnected and then reconnected into a different
+ * hub or switch with different Flow Control capabilities.
+ */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ hw->fc &= (~e1000_fc_tx_pause);
+
+ if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
+ hw->fc &= (~e1000_fc_rx_pause);
+
+ hw->original_fc = hw->fc;
+
+ DEBUGOUT("After fix-ups FlowControl is now = %x\n", hw->fc);
+
+ /* Take the 4 bits from EEPROM word 0x0F that determine the initial
+ * polarity value for the SW controlled pins, and setup the
+ * Extended Device Control reg with that info.
+ * This is needed because one of the SW controlled pins is used for
+ * signal detection. So this should be done before e1000_setup_pcs_link()
+ * or e1000_phy_setup() is called.
+ */
+ if (hw->mac_type == e1000_82543) {
+ ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
+ SWDPIO__EXT_SHIFT);
+ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+ }
+
+ /* Call the necessary subroutine to configure the link. */
+ ret_val = (hw->media_type == e1000_media_type_fiber) ?
+ e1000_setup_fiber_link(nic) : e1000_setup_copper_link(nic);
+ if (ret_val < 0) {
+ return ret_val;
+ }
+
+ /* Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ DEBUGOUT
+ ("Initializing the Flow Control address, type and timer regs\n");
+
+ E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW);
+ E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE);
+ E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time);
+
+ /* Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames in not enabled, then these
+ * registers will be set to 0.
+ */
+ if (!(hw->fc & e1000_fc_tx_pause)) {
+ E1000_WRITE_REG(hw, FCRTL, 0);
+ E1000_WRITE_REG(hw, FCRTH, 0);
+ } else {
+ /* We need to set up the Receive Threshold high and low water marks
+ * as well as (optionally) enabling the transmission of XON frames.
+ */
+ if (hw->fc_send_xon) {
+ E1000_WRITE_REG(hw, FCRTL,
+ (hw->fc_low_water | E1000_FCRTL_XONE));
+ E1000_WRITE_REG(hw, FCRTH, hw->fc_high_water);
+ } else {
+ E1000_WRITE_REG(hw, FCRTL, hw->fc_low_water);
+ E1000_WRITE_REG(hw, FCRTH, hw->fc_high_water);
+ }
+ }
+ return ret_val;
+}
+
+/******************************************************************************
+ * Sets up link for a fiber based adapter
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Manipulates Physical Coding Sublayer functions in order to configure
+ * link. Assumes the hardware has been previously reset and the transmitter
+ * and receiver are not enabled.
+ *****************************************************************************/
+static int
+e1000_setup_fiber_link(struct eth_device *nic)
+{
+ struct e1000_hw *hw = nic->priv;
+ uint32_t ctrl;
+ uint32_t status;
+ uint32_t txcw = 0;
+ uint32_t i;
+ uint32_t signal;
+ int32_t ret_val;
+
+ DEBUGFUNC();
+ /* On adapters with a MAC newer that 82544, SW Defineable pin 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal
+ */
+ ctrl = E1000_READ_REG(hw, CTRL);
+ if ((hw->mac_type > e1000_82544) && !(ctrl & E1000_CTRL_ILOS))
+ signal = E1000_CTRL_SWDPIN1;
+ else
+ signal = 0;
+
+ printf("signal for %s is %x (ctrl %08x)!!!!\n", nic->name, signal,
+ ctrl);
+ /* Take the link out of reset */
+ ctrl &= ~(E1000_CTRL_LRST);
+
+ e1000_config_collision_dist(hw);
+
+ /* Check for a software override of the flow control settings, and setup
+ * the device accordingly. If auto-negotiation is enabled, then software
+ * will have to set the "PAUSE" bits to the correct value in the Tranmsit
+ * Config Word Register (TXCW) and re-start auto-negotiation. However, if
+ * auto-negotiation is disabled, then software will have to manually
+ * configure the two flow control enable bits in the CTRL register.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames, but
+ * not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but we do
+ * not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ */
+ switch (hw->fc) {
+ case e1000_fc_none:
+ /* Flow control is completely disabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
+ break;
+ case e1000_fc_rx_pause:
+ /* RX Flow control is enabled and TX Flow control is disabled by a
+ * software over-ride. Since there really isn't a way to advertise
+ * that we are capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ case e1000_fc_tx_pause:
+ /* TX Flow control is enabled, and RX Flow control is disabled, by a
+ * software over-ride.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
+ break;
+ case e1000_fc_full:
+ /* Flow control (both RX and TX) is enabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ break;
+ }
+
+ /* Since auto-negotiation is enabled, take the link out of reset (the link
+ * will be in reset, because we previously reset the chip). This will
+ * restart auto-negotiation. If auto-neogtiation is successful then the
+ * link-up status bit will be set and the flow control enable bits (RFCE
+ * and TFCE) will be set according to their negotiated value.
+ */
+ DEBUGOUT("Auto-negotiation enabled (%#x)\n", txcw);
+
+ E1000_WRITE_REG(hw, TXCW, txcw);
+ E1000_WRITE_REG(hw, CTRL, ctrl);
+ E1000_WRITE_FLUSH(hw);
+
+ hw->txcw = txcw;
+ mdelay(1);
+
+ /* If we have a signal (the cable is plugged in) then poll for a "Link-Up"
+ * indication in the Device Status Register. Time-out if a link isn't
+ * seen in 500 milliseconds seconds (Auto-negotiation should complete in
+ * less than 500 milliseconds even if the other end is doing it in SW).
+ */
+ if ((E1000_READ_REG(hw, CTRL) & E1000_CTRL_SWDPIN1) == signal) {
+ DEBUGOUT("Looking for Link\n");
+ for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
+ mdelay(10);
+ status = E1000_READ_REG(hw, STATUS);
+ if (status & E1000_STATUS_LU)
+ break;
+ }
+ if (i == (LINK_UP_TIMEOUT / 10)) {
+ /* AutoNeg failed to achieve a link, so we'll call
+ * e1000_check_for_link. This routine will force the link up if we
+ * detect a signal. This will allow us to communicate with
+ * non-autonegotiating link partners.
+ */
+ DEBUGOUT("Never got a valid link from auto-neg!!!\n");
+ hw->autoneg_failed = 1;
+ ret_val = e1000_check_for_link(nic);
+ if (ret_val < 0) {
+ DEBUGOUT("Error while checking for link\n");
+ return ret_val;
+ }
+ hw->autoneg_failed = 0;
+ } else {
+ hw->autoneg_failed = 0;
+ DEBUGOUT("Valid Link Found\n");
+ }
+ } else {
+ DEBUGOUT("No Signal Detected\n");
+ return -E1000_ERR_NOLINK;
+ }
+ return 0;
+}
+
+/******************************************************************************
+* Detects which PHY is present and the speed and duplex
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static int
+e1000_setup_copper_link(struct eth_device *nic)
+{
+ struct e1000_hw *hw = nic->priv;
+ uint32_t ctrl;
+ int32_t ret_val;
+ uint16_t i;
+ uint16_t phy_data;
+
+ DEBUGFUNC();
+
+ ctrl = E1000_READ_REG(hw, CTRL);
+ /* With 82543, we need to force speed and duplex on the MAC equal to what
+ * the PHY speed and duplex configuration is. In addition, we need to
+ * perform a hardware reset on the PHY to take it out of reset.
+ */
+ if (hw->mac_type > e1000_82543) {
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ E1000_WRITE_REG(hw, CTRL, ctrl);
+ } else {
+ ctrl |=
+ (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
+ E1000_WRITE_REG(hw, CTRL, ctrl);
+ e1000_phy_hw_reset(hw);
+ }
+
+ /* Make sure we have a valid PHY */
+ ret_val = e1000_detect_gig_phy(hw);
+ if (ret_val < 0) {
+ DEBUGOUT("Error, did not detect valid phy.\n");
+ return ret_val;
+ }
+ DEBUGOUT("Phy ID = %x \n", hw->phy_id);
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ if (e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+#if 0
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ switch (hw->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+#else
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+#endif
+
+#if 0
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (hw->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+#else
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+#endif
+ if (e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data) < 0) {
+ DEBUGOUT("PHY Write Error\n");
+ return -E1000_ERR_PHY;
+ }
+
+ /* Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ if (e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ if (e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data) < 0) {
+ DEBUGOUT("PHY Write Error\n");
+ return -E1000_ERR_PHY;
+ }
+
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val < 0) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ /* Options:
+ * autoneg = 1 (default)
+ * PHY will advertise value(s) parsed from
+ * autoneg_advertised and fc
+ * autoneg = 0
+ * PHY will be set to 10H, 10F, 100H, or 100F
+ * depending on value parsed from forced_speed_duplex.
+ */
+
+ /* Is autoneg enabled? This is enabled by default or by software override.
+ * If so, call e1000_phy_setup_autoneg routine to parse the
+ * autoneg_advertised and fc options. If autoneg is NOT enabled, then the
+ * user should have provided a speed/duplex override. If so, then call
+ * e1000_phy_force_speed_duplex to parse and set this up.
+ */
+ /* Perform some bounds checking on the hw->autoneg_advertised
+ * parameter. If this variable is zero, then set it to the default.
+ */
+ hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ /* If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if (hw->autoneg_advertised == 0)
+ hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+ ret_val = e1000_phy_setup_autoneg(hw);
+ if (ret_val < 0) {
+ DEBUGOUT("Error Setting up Auto-Negotiation\n");
+ return ret_val;
+ }
+ DEBUGOUT("Restarting Auto-Neg\n");
+
+ /* Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ if (e1000_read_phy_reg(hw, PHY_CTRL, &phy_data) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ if (e1000_write_phy_reg(hw, PHY_CTRL, phy_data) < 0) {
+ DEBUGOUT("PHY Write Error\n");
+ return -E1000_ERR_PHY;
+ }
+#if 0
+ /* Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if (hw->wait_autoneg_complete) {
+ ret_val = e1000_wait_autoneg(hw);
+ if (ret_val < 0) {
+ DEBUGOUT
+ ("Error while waiting for autoneg to complete\n");
+ return ret_val;
+ }
+ }
+#else
+ /* If we do not wait for autonegtation to complete I
+ * do not see a valid link status.
+ */
+ ret_val = e1000_wait_autoneg(hw);
+ if (ret_val < 0) {
+ DEBUGOUT("Error while waiting for autoneg to complete\n");
+ return ret_val;
+ }
+#endif
+
+ /* Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+ for (i = 0; i < 10; i++) {
+ if (e1000_read_phy_reg(hw, PHY_STATUS, &phy_data) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ if (e1000_read_phy_reg(hw, PHY_STATUS, &phy_data) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ if (phy_data & MII_SR_LINK_STATUS) {
+ /* We have link, so we need to finish the config process:
+ * 1) Set up the MAC to the current PHY speed/duplex
+ * if we are on 82543. If we
+ * are on newer silicon, we only need to configure
+ * collision distance in the Transmit Control Register.
+ * 2) Set up flow control on the MAC to that established with
+ * the link partner.
+ */
+ if (hw->mac_type >= e1000_82544) {
+ e1000_config_collision_dist(hw);
+ } else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val < 0) {
+ DEBUGOUT
+ ("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val < 0) {
+ DEBUGOUT("Error Configuring Flow Control\n");
+ return ret_val;
+ }
+ DEBUGOUT("Valid link established!!!\n");
+ return 0;
+ }
+ udelay(10);
+ }
+
+ DEBUGOUT("Unable to establish link!!!\n");
+ return -E1000_ERR_NOLINK;
+}
+
+/******************************************************************************
+* Configures PHY autoneg and flow control advertisement settings
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static int
+e1000_phy_setup_autoneg(struct e1000_hw *hw)
+{
+ uint16_t mii_autoneg_adv_reg;
+ uint16_t mii_1000t_ctrl_reg;
+
+ DEBUGFUNC();
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ if (e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ if (e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+
+ /* Need to parse both autoneg_advertised and fc and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
+
+ /* First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
+ mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
+
+ DEBUGOUT("autoneg_advertised %x\n", hw->autoneg_advertised);
+
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
+ DEBUGOUT("Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
+
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
+ DEBUGOUT("Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
+ DEBUGOUT("Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
+ DEBUGOUT("Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
+
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+ if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
+ DEBUGOUT
+ ("Advertise 1000mb Half duplex requested, request denied!\n");
+ }
+
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
+ DEBUGOUT("Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ }
+
+ /* Check for a software override of the flow control settings, and
+ * setup the PHY advertisement registers accordingly. If
+ * auto-negotiation is enabled, then software will have to set the
+ * "PAUSE" bits to the correct value in the Auto-Negotiation
+ * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
+ switch (hw->fc) {
+ case e1000_fc_none: /* 0 */
+ /* Flow control (RX & TX) is completely disabled by a
+ * software over-ride.
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case e1000_fc_rx_pause: /* 1 */
+ /* RX Flow control is enabled, and TX Flow control is
+ * disabled, by a software over-ride.
+ */
+ /* Since there really isn't a way to advertise that we are
+ * capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later
+ * (in e1000_config_fc_after_link_up) we will disable the
+ *hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case e1000_fc_tx_pause: /* 2 */
+ /* TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+ mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+ break;
+ case e1000_fc_full: /* 3 */
+ /* Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ if (e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg) < 0) {
+ DEBUGOUT("PHY Write Error\n");
+ return -E1000_ERR_PHY;
+ }
+
+ DEBUGOUT("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+ if (e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg) < 0) {
+ DEBUGOUT("PHY Write Error\n");
+ return -E1000_ERR_PHY;
+ }
+ return 0;
+}
+
+/******************************************************************************
+* Sets the collision distance in the Transmit Control register
+*
+* hw - Struct containing variables accessed by shared code
+*
+* Link should have been established previously. Reads the speed and duplex
+* information from the Device Status register.
+******************************************************************************/
+static void
+e1000_config_collision_dist(struct e1000_hw *hw)
+{
+ uint32_t tctl;
+
+ tctl = E1000_READ_REG(hw, TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+
+ E1000_WRITE_REG(hw, TCTL, tctl);
+ E1000_WRITE_FLUSH(hw);
+}
+
+/******************************************************************************
+* Sets MAC speed and duplex settings to reflect the those in the PHY
+*
+* hw - Struct containing variables accessed by shared code
+* mii_reg - data to write to the MII control register
+*
+* The contents of the PHY register containing the needed information need to
+* be passed in.
+******************************************************************************/
+static int
+e1000_config_mac_to_phy(struct e1000_hw *hw)
+{
+ uint32_t ctrl;
+ uint16_t phy_data;
+
+ DEBUGFUNC();
+
+ /* Read the Device Control Register and set the bits to Force Speed
+ * and Duplex.
+ */
+ ctrl = E1000_READ_REG(hw, CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
+
+ /* Set up duplex in the Device Control and Transmit Control
+ * registers depending on negotiated values.
+ */
+ if (e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ if (phy_data & M88E1000_PSSR_DPLX)
+ ctrl |= E1000_CTRL_FD;
+ else
+ ctrl &= ~E1000_CTRL_FD;
+
+ e1000_config_collision_dist(hw);
+
+ /* Set up speed in the Device Control register depending on
+ * negotiated values.
+ */
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
+ ctrl |= E1000_CTRL_SPD_1000;
+ else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
+ ctrl |= E1000_CTRL_SPD_100;
+ /* Write the configured values back to the Device Control Reg. */
+ E1000_WRITE_REG(hw, CTRL, ctrl);
+ return 0;
+}
+
+/******************************************************************************
+ * Forces the MAC's flow control settings.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sets the TFCE and RFCE bits in the device control register to reflect
+ * the adapter settings. TFCE and RFCE need to be explicitly set by
+ * software when a Copper PHY is used because autonegotiation is managed
+ * by the PHY rather than the MAC. Software must also configure these
+ * bits when link is forced on a fiber connection.
+ *****************************************************************************/
+static int
+e1000_force_mac_fc(struct e1000_hw *hw)
+{
+ uint32_t ctrl;
+
+ DEBUGFUNC();
+
+ /* Get the current configuration of the Device Control Register */
+ ctrl = E1000_READ_REG(hw, CTRL);
+
+ /* Because we didn't get link via the internal auto-negotiation
+ * mechanism (we either forced link or we got link via PHY
+ * auto-neg), we have to manually enable/disable transmit an
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
+ * according to the "hw->fc" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause
+ * frames but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * frames but we do not receive pause frames).
+ * 3: Both Rx and TX flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
+
+ switch (hw->fc) {
+ case e1000_fc_none:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ case e1000_fc_rx_pause:
+ ctrl &= (~E1000_CTRL_TFCE);
+ ctrl |= E1000_CTRL_RFCE;
+ break;
+ case e1000_fc_tx_pause:
+ ctrl &= (~E1000_CTRL_RFCE);
+ ctrl |= E1000_CTRL_TFCE;
+ break;
+ case e1000_fc_full:
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ /* Disable TX Flow Control for 82542 (rev 2.0) */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ ctrl &= (~E1000_CTRL_TFCE);
+
+ E1000_WRITE_REG(hw, CTRL, ctrl);
+ return 0;
+}
+
+/******************************************************************************
+ * Configures flow control settings after link is established
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Should be called immediately after a valid link has been established.
+ * Forces MAC flow control settings if link was forced. When in MII/GMII mode
+ * and autonegotiation is enabled, the MAC flow control settings will be set
+ * based on the flow control negotiated by the PHY. In TBI mode, the TFCE
+ * and RFCE bits will be automaticaly set to the negotiated flow control mode.
+ *****************************************************************************/
+static int
+e1000_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ int32_t ret_val;
+ uint16_t mii_status_reg;
+ uint16_t mii_nway_adv_reg;
+ uint16_t mii_nway_lp_ability_reg;
+ uint16_t speed;
+ uint16_t duplex;
+
+ DEBUGFUNC();
+
+ /* Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ * configuration of the MAC to match the "fc" parameter.
+ */
+ if ((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) {
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val < 0) {
+ DEBUGOUT("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Check for the case where we have copper media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if (hw->media_type == e1000_media_type_copper) {
+ /* Read the MII Status Register and check to see if AutoNeg
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
+ if (e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg) < 0) {
+ DEBUGOUT("PHY Read Error \n");
+ return -E1000_ERR_PHY;
+ }
+ if (e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg) < 0) {
+ DEBUGOUT("PHY Read Error \n");
+ return -E1000_ERR_PHY;
+ }
+
+ if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
+ /* The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement Register
+ * (Address 4) and the Auto_Negotiation Base Page Ability
+ * Register (Address 5) to determine how flow control was
+ * negotiated.
+ */
+ if (e1000_read_phy_reg
+ (hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ if (e1000_read_phy_reg
+ (hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+
+ /* Two bits in the Auto Negotiation Advertisement Register
+ * (Address 4) and two bits in the Auto Negotiation Base
+ * Page Ability Register (Address 5) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | e1000_fc_none
+ * 0 | 1 | 0 | DC | e1000_fc_none
+ * 0 | 1 | 1 | 0 | e1000_fc_none
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ * 1 | 0 | 0 | DC | e1000_fc_none
+ * 1 | DC | 1 | DC | e1000_fc_full
+ * 1 | 1 | 0 | 0 | e1000_fc_none
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ *
+ */
+ /* Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | e1000_fc_full
+ *
+ */
+ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+ /* Now we need to check if the user selected RX ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->original_fc == e1000_fc_full) {
+ hw->fc = e1000_fc_full;
+ DEBUGOUT("Flow Control = FULL.\r\n");
+ } else {
+ hw->fc = e1000_fc_rx_pause;
+ DEBUGOUT
+ ("Flow Control = RX PAUSE frames only.\r\n");
+ }
+ }
+ /* For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ *
+ */
+ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
+ {
+ hw->fc = e1000_fc_tx_pause;
+ DEBUGOUT
+ ("Flow Control = TX PAUSE frames only.\r\n");
+ }
+ /* For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ *
+ */
+ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
+ {
+ hw->fc = e1000_fc_rx_pause;
+ DEBUGOUT
+ ("Flow Control = RX PAUSE frames only.\r\n");
+ }
+ /* Per the IEEE spec, at this point flow control should be
+ * disabled. However, we want to consider that we could
+ * be connected to a legacy switch that doesn't advertise
+ * desired flow control, but can be forced on the link
+ * partner. So if we advertised no flow control, that is
+ * what we will resolve to. If we advertised some kind of
+ * receive capability (Rx Pause Only or Full Flow Control)
+ * and the link partner advertised none, we will configure
+ * ourselves to enable Rx Flow Control only. We can do
+ * this safely for two reasons: If the link partner really
+ * didn't want flow control enabled, and we enable Rx, no
+ * harm done since we won't be receiving any PAUSE frames
+ * anyway. If the intent on the link partner was to have
+ * flow control enabled, then by us enabling RX only, we
+ * can at least receive pause frames and process them.
+ * This is a good idea because in most cases, since we are
+ * predominantly a server NIC, more times than not we will
+ * be asked to delay transmission of packets than asking
+ * our link partner to pause transmission of frames.
+ */
+ else if (hw->original_fc == e1000_fc_none ||
+ hw->original_fc == e1000_fc_tx_pause) {
+ hw->fc = e1000_fc_none;
+ DEBUGOUT("Flow Control = NONE.\r\n");
+ } else {
+ hw->fc = e1000_fc_rx_pause;
+ DEBUGOUT
+ ("Flow Control = RX PAUSE frames only.\r\n");
+ }
+
+ /* Now we need to do one last check... If we auto-
+ * negotiated to HALF DUPLEX, flow control should not be
+ * enabled per IEEE 802.3 spec.
+ */
+ e1000_get_speed_and_duplex(hw, &speed, &duplex);
+
+ if (duplex == HALF_DUPLEX)
+ hw->fc = e1000_fc_none;
+
+ /* Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val < 0) {
+ DEBUGOUT
+ ("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ } else {
+ DEBUGOUT
+ ("Copper PHY and Auto Neg has not completed.\r\n");
+ }
+ }
+ return 0;
+}
+
+/******************************************************************************
+ * Checks to see if the link status of the hardware has changed.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Called by any function that needs to check the link status of the adapter.
+ *****************************************************************************/
+static int
+e1000_check_for_link(struct eth_device *nic)
+{
+ struct e1000_hw *hw = nic->priv;
+ uint32_t rxcw;
+ uint32_t ctrl;
+ uint32_t status;
+ uint32_t rctl;
+ uint32_t signal;
+ int32_t ret_val;
+ uint16_t phy_data;
+ uint16_t lp_capability;
+
+ DEBUGFUNC();
+
+ /* On adapters with a MAC newer that 82544, SW Defineable pin 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal
+ */
+ ctrl = E1000_READ_REG(hw, CTRL);
+ if ((hw->mac_type > e1000_82544) && !(ctrl & E1000_CTRL_ILOS))
+ signal = E1000_CTRL_SWDPIN1;
+ else
+ signal = 0;
+
+ status = E1000_READ_REG(hw, STATUS);
+ rxcw = E1000_READ_REG(hw, RXCW);
+ DEBUGOUT("ctrl: %#08x status %#08x rxcw %#08x\n", ctrl, status, rxcw);
+
+ /* If we have a copper PHY then we only want to go out to the PHY
+ * registers to see if Auto-Neg has completed and/or if our link
+ * status has changed. The get_link_status flag will be set if we
+ * receive a Link Status Change interrupt or we have Rx Sequence
+ * Errors.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
+ /* First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ * Read the register twice since the link bit is sticky.
+ */
+ if (e1000_read_phy_reg(hw, PHY_STATUS, &phy_data) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ if (e1000_read_phy_reg(hw, PHY_STATUS, &phy_data) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ hw->get_link_status = FALSE;
+ } else {
+ /* No link detected */
+ return -E1000_ERR_NOLINK;
+ }
+
+ /* We have a M88E1000 PHY and Auto-Neg is enabled. If we
+ * have Si on board that is 82544 or newer, Auto
+ * Speed Detection takes care of MAC speed/duplex
+ * configuration. So we only need to configure Collision
+ * Distance in the MAC. Otherwise, we need to force
+ * speed/duplex on the MAC to the current PHY speed/duplex
+ * settings.
+ */
+ if (hw->mac_type >= e1000_82544)
+ e1000_config_collision_dist(hw);
+ else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val < 0) {
+ DEBUGOUT
+ ("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Configure Flow Control now that Auto-Neg has completed. First, we
+ * need to restore the desired flow control settings because we may
+ * have had to re-autoneg with a different link partner.
+ */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val < 0) {
+ DEBUGOUT("Error configuring flow control\n");
+ return ret_val;
+ }
+
+ /* At this point we know that we are on copper and we have
+ * auto-negotiated link. These are conditions for checking the link
+ * parter capability register. We use the link partner capability to
+ * determine if TBI Compatibility needs to be turned on or off. If
+ * the link partner advertises any speed in addition to Gigabit, then
+ * we assume that they are GMII-based, and TBI compatibility is not
+ * needed. If no other speeds are advertised, we assume the link
+ * partner is TBI-based, and we turn on TBI Compatibility.
+ */
+ if (hw->tbi_compatibility_en) {
+ if (e1000_read_phy_reg
+ (hw, PHY_LP_ABILITY, &lp_capability) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ if (lp_capability & (NWAY_LPAR_10T_HD_CAPS |
+ NWAY_LPAR_10T_FD_CAPS |
+ NWAY_LPAR_100TX_HD_CAPS |
+ NWAY_LPAR_100TX_FD_CAPS |
+ NWAY_LPAR_100T4_CAPS)) {
+ /* If our link partner advertises anything in addition to
+ * gigabit, we do not need to enable TBI compatibility.
+ */
+ if (hw->tbi_compatibility_on) {
+ /* If we previously were in the mode, turn it off. */
+ rctl = E1000_READ_REG(hw, RCTL);
+ rctl &= ~E1000_RCTL_SBP;
+ E1000_WRITE_REG(hw, RCTL, rctl);
+ hw->tbi_compatibility_on = FALSE;
+ }
+ } else {
+ /* If TBI compatibility is was previously off, turn it on. For
+ * compatibility with a TBI link partner, we will store bad
+ * packets. Some frames have an additional byte on the end and
+ * will look like CRC errors to to the hardware.
+ */
+ if (!hw->tbi_compatibility_on) {
+ hw->tbi_compatibility_on = TRUE;
+ rctl = E1000_READ_REG(hw, RCTL);
+ rctl |= E1000_RCTL_SBP;
+ E1000_WRITE_REG(hw, RCTL, rctl);
+ }
+ }
+ }
+ }
+ /* If we don't have link (auto-negotiation failed or link partner cannot
+ * auto-negotiate), the cable is plugged in (we have signal), and our
+ * link partner is not trying to auto-negotiate with us (we are receiving
+ * idles or data), we need to force link up. We also need to give
+ * auto-negotiation time to complete, in case the cable was just plugged
+ * in. The autoneg_failed flag does this.
+ */
+ else if ((hw->media_type == e1000_media_type_fiber) &&
+ (!(status & E1000_STATUS_LU)) &&
+ ((ctrl & E1000_CTRL_SWDPIN1) == signal) &&
+ (!(rxcw & E1000_RXCW_C))) {
+ if (hw->autoneg_failed == 0) {
+ hw->autoneg_failed = 1;
+ return 0;
+ }
+ DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\r\n");
+
+ /* Disable auto-negotiation in the TXCW register */
+ E1000_WRITE_REG(hw, TXCW, (hw->txcw & ~E1000_TXCW_ANE));
+
+ /* Force link-up and also force full-duplex. */
+ ctrl = E1000_READ_REG(hw, CTRL);
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+ E1000_WRITE_REG(hw, CTRL, ctrl);
+
+ /* Configure Flow Control after forcing link up. */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val < 0) {
+ DEBUGOUT("Error configuring flow control\n");
+ return ret_val;
+ }
+ }
+ /* If we are forcing link and we are receiving /C/ ordered sets, re-enable
+ * auto-negotiation in the TXCW register and disable forced link in the
+ * Device Control register in an attempt to auto-negotiate with our link
+ * partner.
+ */
+ else if ((hw->media_type == e1000_media_type_fiber) &&
+ (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+ DEBUGOUT
+ ("RXing /C/, enable AutoNeg and stop forcing link.\r\n");
+ E1000_WRITE_REG(hw, TXCW, hw->txcw);
+ E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU));
+ }
+ return 0;
+}
+
+/******************************************************************************
+ * Detects the current speed and duplex settings of the hardware.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * speed - Speed of the connection
+ * duplex - Duplex setting of the connection
+ *****************************************************************************/
+static void
+e1000_get_speed_and_duplex(struct e1000_hw *hw,
+ uint16_t * speed, uint16_t * duplex)
+{
+ uint32_t status;
+
+ DEBUGFUNC();
+
+ if (hw->mac_type >= e1000_82543) {
+ status = E1000_READ_REG(hw, STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
+ DEBUGOUT("1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
+ DEBUGOUT("100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
+ DEBUGOUT("10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
+ DEBUGOUT("Full Duplex\r\n");
+ } else {
+ *duplex = HALF_DUPLEX;
+ DEBUGOUT(" Half Duplex\r\n");
+ }
+ } else {
+ DEBUGOUT("1000 Mbs, Full Duplex\r\n");
+ *speed = SPEED_1000;
+ *duplex = FULL_DUPLEX;
+ }
+}
+
+/******************************************************************************
+* Blocks until autoneg completes or times out (~4.5 seconds)
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static int
+e1000_wait_autoneg(struct e1000_hw *hw)
+{
+ uint16_t i;
+ uint16_t phy_data;
+
+ DEBUGFUNC();
+ DEBUGOUT("Waiting for Auto-Neg to complete.\n");
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg
+ * Complete bit to be set.
+ */
+ if (e1000_read_phy_reg(hw, PHY_STATUS, &phy_data) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ if (e1000_read_phy_reg(hw, PHY_STATUS, &phy_data) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ if (phy_data & MII_SR_AUTONEG_COMPLETE) {
+ DEBUGOUT("Auto-Neg complete.\n");
+ return 0;
+ }
+ mdelay(100);
+ }
+ DEBUGOUT("Auto-Neg timedout.\n");
+ return -E1000_ERR_TIMEOUT;
+}
+
+/******************************************************************************
+* Raises the Management Data Clock
+*
+* hw - Struct containing variables accessed by shared code
+* ctrl - Device control register's current value
+******************************************************************************/
+static void
+e1000_raise_mdi_clk(struct e1000_hw *hw, uint32_t * ctrl)
+{
+ /* Raise the clock input to the Management Data Clock (by setting the MDC
+ * bit), and then delay 2 microseconds.
+ */
+ E1000_WRITE_REG(hw, CTRL, (*ctrl | E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH(hw);
+ udelay(2);
+}
+
+/******************************************************************************
+* Lowers the Management Data Clock
+*
+* hw - Struct containing variables accessed by shared code
+* ctrl - Device control register's current value
+******************************************************************************/
+static void
+e1000_lower_mdi_clk(struct e1000_hw *hw, uint32_t * ctrl)
+{
+ /* Lower the clock input to the Management Data Clock (by clearing the MDC
+ * bit), and then delay 2 microseconds.
+ */
+ E1000_WRITE_REG(hw, CTRL, (*ctrl & ~E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH(hw);
+ udelay(2);
+}
+
+/******************************************************************************
+* Shifts data bits out to the PHY
+*
+* hw - Struct containing variables accessed by shared code
+* data - Data to send out to the PHY
+* count - Number of bits to shift out
+*
+* Bits are shifted out in MSB to LSB order.
+******************************************************************************/
+static void
+e1000_shift_out_mdi_bits(struct e1000_hw *hw, uint32_t data, uint16_t count)
+{
+ uint32_t ctrl;
+ uint32_t mask;
+
+ /* We need to shift "count" number of bits out to the PHY. So, the value
+ * in the "data" parameter will be shifted out to the PHY one bit at a
+ * time. In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01;
+ mask <<= (count - 1);
+
+ ctrl = E1000_READ_REG(hw, CTRL);
+
+ /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
+ ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
+
+ while (mask) {
+ /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
+ * then raising and lowering the Management Data Clock. A "0" is
+ * shifted out to the PHY by setting the MDIO bit to "0" and then
+ * raising and lowering the clock.
+ */
+ if (data & mask)
+ ctrl |= E1000_CTRL_MDIO;
+ else
+ ctrl &= ~E1000_CTRL_MDIO;
+
+ E1000_WRITE_REG(hw, CTRL, ctrl);
+ E1000_WRITE_FLUSH(hw);
+
+ udelay(2);
+
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ mask = mask >> 1;
+ }
+}
+
+/******************************************************************************
+* Shifts data bits in from the PHY
+*
+* hw - Struct containing variables accessed by shared code
+*
+* Bits are shifted in in MSB to LSB order.
+******************************************************************************/
+static uint16_t
+e1000_shift_in_mdi_bits(struct e1000_hw *hw)
+{
+ uint32_t ctrl;
+ uint16_t data = 0;
+ uint8_t i;
+
+ /* In order to read a register from the PHY, we need to shift in a total
+ * of 18 bits from the PHY. The first two bit (turnaround) times are used
+ * to avoid contention on the MDIO pin when a read operation is performed.
+ * These two bits are ignored by us and thrown away. Bits are "shifted in"
+ * by raising the input to the Management Data Clock (setting the MDC bit),
+ * and then reading the value of the MDIO bit.
+ */
+ ctrl = E1000_READ_REG(hw, CTRL);
+
+ /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
+ ctrl &= ~E1000_CTRL_MDIO_DIR;
+ ctrl &= ~E1000_CTRL_MDIO;
+
+ E1000_WRITE_REG(hw, CTRL, ctrl);
+ E1000_WRITE_FLUSH(hw);
+
+ /* Raise and Lower the clock before reading in the data. This accounts for
+ * the turnaround bits. The first clock occurred when we clocked out the
+ * last bit of the Register Address.
+ */
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ for (data = 0, i = 0; i < 16; i++) {
+ data = data << 1;
+ e1000_raise_mdi_clk(hw, &ctrl);
+ ctrl = E1000_READ_REG(hw, CTRL);
+ /* Check to see if we shifted in a "1". */
+ if (ctrl & E1000_CTRL_MDIO)
+ data |= 1;
+ e1000_lower_mdi_clk(hw, &ctrl);
+ }
+
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ return data;
+}
+
+/*****************************************************************************
+* Reads the value from a PHY register
+*
+* hw - Struct containing variables accessed by shared code
+* reg_addr - address of the PHY register to read
+******************************************************************************/
+static int
+e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t * phy_data)
+{
+ uint32_t i;
+ uint32_t mdic = 0;
+ const uint32_t phy_addr = 1;
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ DEBUGOUT("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, and register address in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
+ E1000_WRITE_REG(hw, MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < 64; i++) {
+ udelay(10);
+ mdic = E1000_READ_REG(hw, MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ DEBUGOUT("MDI Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ DEBUGOUT("MDI Error\n");
+ return -E1000_ERR_PHY;
+ }
+ *phy_data = (uint16_t) mdic;
+ } else {
+ /* We must first send a preamble through the MDIO pin to signal the
+ * beginning of an MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the next few fields that are required for a read
+ * operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine five different times. The format of
+ * a MII read instruction consists of a shift out of 14 bits and is
+ * defined as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr>
+ * followed by a shift in of 18 bits. This first two bits shifted in
+ * are TurnAround bits used to avoid contention on the MDIO pin when a
+ * READ operation is performed. These two bits are thrown away
+ * followed by a shift in of 16 bits which contains the desired data.
+ */
+ mdic = ((reg_addr) | (phy_addr << 5) |
+ (PHY_OP_READ << 10) | (PHY_SOF << 12));
+
+ e1000_shift_out_mdi_bits(hw, mdic, 14);
+
+ /* Now that we've shifted out the read command to the MII, we need to
+ * "shift in" the 16-bit value (18 total bits) of the requested PHY
+ * register address.
+ */
+ *phy_data = e1000_shift_in_mdi_bits(hw);
+ }
+ return 0;
+}
+
+/******************************************************************************
+* Writes a value to a PHY register
+*
+* hw - Struct containing variables accessed by shared code
+* reg_addr - address of the PHY register to write
+* data - data to write to the PHY
+******************************************************************************/
+static int
+e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t phy_data)
+{
+ uint32_t i;
+ uint32_t mdic = 0;
+ const uint32_t phy_addr = 1;
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ DEBUGOUT("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, register address, and data intended
+ * for the PHY register in the MDI Control register. The MAC will take
+ * care of interfacing with the PHY to send the desired data.
+ */
+ mdic = (((uint32_t) phy_data) |
+ (reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
+ E1000_WRITE_REG(hw, MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < 64; i++) {
+ udelay(10);
+ mdic = E1000_READ_REG(hw, MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ DEBUGOUT("MDI Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ } else {
+ /* We'll need to use the SW defined pins to shift the write command
+ * out to the PHY. We first send a preamble to the PHY to signal the
+ * beginning of the MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the remaining required fields that will indicate a
+ * write operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine for each field in the command. The
+ * format of a MII write instruction is as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>.
+ */
+ mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
+ (PHY_OP_WRITE << 12) | (PHY_SOF << 14));
+ mdic <<= 16;
+ mdic |= (uint32_t) phy_data;
+
+ e1000_shift_out_mdi_bits(hw, mdic, 32);
+ }
+ return 0;
+}
+
+/******************************************************************************
+* Returns the PHY to the power-on reset state
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static void
+e1000_phy_hw_reset(struct e1000_hw *hw)
+{
+ uint32_t ctrl;
+ uint32_t ctrl_ext;
+
+ DEBUGFUNC();
+
+ DEBUGOUT("Resetting Phy...\n");
+
+ if (hw->mac_type > e1000_82543) {
+ /* Read the device control register and assert the E1000_CTRL_PHY_RST
+ * bit. Then, take it out of reset.
+ */
+ ctrl = E1000_READ_REG(hw, CTRL);
+ E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST);
+ E1000_WRITE_FLUSH(hw);
+ mdelay(10);
+ E1000_WRITE_REG(hw, CTRL, ctrl);
+ E1000_WRITE_FLUSH(hw);
+ } else {
+ /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
+ * bit to put the PHY into reset. Then, take it out of reset.
+ */
+ ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
+ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH(hw);
+ mdelay(10);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
+ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH(hw);
+ }
+ udelay(150);
+}
+
+/******************************************************************************
+* Resets the PHY
+*
+* hw - Struct containing variables accessed by shared code
+*
+* Sets bit 15 of the MII Control regiser
+******************************************************************************/
+static int
+e1000_phy_reset(struct e1000_hw *hw)
+{
+ uint16_t phy_data;
+
+ DEBUGFUNC();
+
+ if (e1000_read_phy_reg(hw, PHY_CTRL, &phy_data) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ phy_data |= MII_CR_RESET;
+ if (e1000_write_phy_reg(hw, PHY_CTRL, phy_data) < 0) {
+ DEBUGOUT("PHY Write Error\n");
+ return -E1000_ERR_PHY;
+ }
+ udelay(1);
+ return 0;
+}
+
+/******************************************************************************
+* Probes the expected PHY address for known PHY IDs
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static int
+e1000_detect_gig_phy(struct e1000_hw *hw)
+{
+ uint16_t phy_id_high, phy_id_low;
+ int match = FALSE;
+
+ DEBUGFUNC();
+
+ /* Read the PHY ID Registers to identify which PHY is onboard. */
+ if (e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ hw->phy_id = (uint32_t) (phy_id_high << 16);
+ udelay(2);
+ if (e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low) < 0) {
+ DEBUGOUT("PHY Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ hw->phy_id |= (uint32_t) (phy_id_low & PHY_REVISION_MASK);
+
+ switch (hw->mac_type) {
+ case e1000_82543:
+ if (hw->phy_id == M88E1000_E_PHY_ID)
+ match = TRUE;
+ break;
+ case e1000_82544:
+ if (hw->phy_id == M88E1000_I_PHY_ID)
+ match = TRUE;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82546:
+ if (hw->phy_id == M88E1011_I_PHY_ID)
+ match = TRUE;
+ break;
+ default:
+ DEBUGOUT("Invalid MAC type %d\n", hw->mac_type);
+ return -E1000_ERR_CONFIG;
+ }
+ if (match) {
+ DEBUGOUT("PHY ID 0x%X detected\n", hw->phy_id);
+ return 0;
+ }
+ DEBUGOUT("Invalid PHY ID 0x%X\n", hw->phy_id);
+ return -E1000_ERR_PHY;
+}
+
+/**
+ * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
+ *
+ * e1000_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+
+static int
+e1000_sw_init(struct eth_device *nic, int cardnum)
+{
+ struct e1000_hw *hw = (typeof(hw)) nic->priv;
+ int result;
+
+ /* PCI config space info */
+ pci_read_config_word(hw->pdev, PCI_VENDOR_ID, &hw->vendor_id);
+ pci_read_config_word(hw->pdev, PCI_DEVICE_ID, &hw->device_id);
+ pci_read_config_word(hw->pdev, PCI_SUBSYSTEM_VENDOR_ID,
+ &hw->subsystem_vendor_id);
+ pci_read_config_word(hw->pdev, PCI_SUBSYSTEM_ID, &hw->subsystem_id);
+
+ pci_read_config_byte(hw->pdev, PCI_REVISION_ID, &hw->revision_id);
+ pci_read_config_word(hw->pdev, PCI_COMMAND, &hw->pci_cmd_word);
+
+ /* identify the MAC */
+ result = e1000_set_mac_type(hw);
+ if (result) {
+ E1000_ERR("Unknown MAC Type\n");
+ return result;
+ }
+
+ /* lan a vs. lan b settings */
+ if (hw->mac_type == e1000_82546)
+ /*this also works w/ multiple 82546 cards */
+ /*but not if they're intermingled /w other e1000s */
+ hw->lan_loc = (cardnum % 2) ? e1000_lan_b : e1000_lan_a;
+ else
+ hw->lan_loc = e1000_lan_a;
+
+ /* flow control settings */
+ hw->fc_high_water = E1000_FC_HIGH_THRESH;
+ hw->fc_low_water = E1000_FC_LOW_THRESH;
+ hw->fc_pause_time = E1000_FC_PAUSE_TIME;
+ hw->fc_send_xon = 1;
+
+ /* Media type - copper or fiber */
+
+ if (hw->mac_type >= e1000_82543) {
+ uint32_t status = E1000_READ_REG(hw, STATUS);
+
+ if (status & E1000_STATUS_TBIMODE) {
+ DEBUGOUT("fiber interface\n");
+ hw->media_type = e1000_media_type_fiber;
+ } else {
+ DEBUGOUT("copper interface\n");
+ hw->media_type = e1000_media_type_copper;
+ }
+ } else {
+ hw->media_type = e1000_media_type_fiber;
+ }
+
+ if (hw->mac_type < e1000_82543)
+ hw->report_tx_early = 0;
+ else
+ hw->report_tx_early = 1;
+
+ hw->tbi_compatibility_en = TRUE;
+#if 0
+ hw->wait_autoneg_complete = FALSE;
+ hw->adaptive_ifs = TRUE;
+
+ /* Copper options */
+ if (hw->media_type == e1000_media_type_copper) {
+ hw->mdix = AUTO_ALL_MODES;
+ hw->disable_polarity_correction = FALSE;
+ }
+#endif
+ return E1000_SUCCESS;
+}
+
+void
+fill_rx(struct e1000_hw *hw)
+{
+ struct e1000_rx_desc *rd;
+
+ rx_last = rx_tail;
+ rd = rx_base + rx_tail;
+ rx_tail = (rx_tail + 1) % 8;
+ memset(rd, 0, 16);
+ rd->buffer_addr = cpu_to_le64((u32) & packet);
+ E1000_WRITE_REG(hw, RDT, rx_tail);
+}
+
+/**
+ * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+
+static void
+e1000_configure_tx(struct e1000_hw *hw)
+{
+ unsigned long ptr;
+ unsigned long tctl;
+ unsigned long tipg;
+
+ ptr = (u32) tx_pool;
+ if (ptr & 0xf)
+ ptr = (ptr + 0x10) & (~0xf);
+
+ tx_base = (typeof(tx_base)) ptr;
+
+ E1000_WRITE_REG(hw, TDBAL, (u32) tx_base);
+ E1000_WRITE_REG(hw, TDBAH, 0);
+
+ E1000_WRITE_REG(hw, TDLEN, 128);
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+ E1000_WRITE_REG(hw, TDH, 0);
+ E1000_WRITE_REG(hw, TDT, 0);
+ tx_tail = 0;
+
+ /* Set the default values for the Tx Inter Packet Gap timer */
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ tipg = DEFAULT_82542_TIPG_IPGT;
+ tipg |= DEFAULT_82542_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
+ tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber)
+ tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
+ else
+ tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
+ tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
+ tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
+ }
+ E1000_WRITE_REG(hw, TIPG, tipg);
+#if 0
+ /* Set the Tx Interrupt Delay register */
+ E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
+ if (hw->mac_type >= e1000_82540)
+ E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
+#endif
+ /* Program the Transmit Control Register */
+ tctl = E1000_READ_REG(hw, TCTL);
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_EN | E1000_TCTL_PSP |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+ E1000_WRITE_REG(hw, TCTL, tctl);
+
+ e1000_config_collision_dist(hw);
+#if 0
+ /* Setup Transmit Descriptor Settings for this adapter */
+ adapter->txd_cmd = E1000_TXD_CMD_IFCS | E1000_TXD_CMD_IDE;
+
+ if (adapter->hw.report_tx_early == 1)
+ adapter->txd_cmd |= E1000_TXD_CMD_RS;
+ else
+ adapter->txd_cmd |= E1000_TXD_CMD_RPS;
+#endif
+}
+
+/**
+ * e1000_setup_rctl - configure the receive control register
+ * @adapter: Board private structure
+ **/
+static void
+e1000_setup_rctl(struct e1000_hw *hw)
+{
+ uint32_t rctl;
+
+ rctl = E1000_READ_REG(hw, RCTL);
+
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF; /* |
+ (hw.mc_filter_type << E1000_RCTL_MO_SHIFT); */
+
+ if (hw->tbi_compatibility_on == 1)
+ rctl |= E1000_RCTL_SBP;
+ else
+ rctl &= ~E1000_RCTL_SBP;
+
+ rctl &= ~(E1000_RCTL_SZ_4096);
+#if 0
+ switch (adapter->rx_buffer_len) {
+ case E1000_RXBUFFER_2048:
+ default:
+#endif
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~(E1000_RCTL_BSEX | E1000_RCTL_LPE);
+#if 0
+ break;
+ case E1000_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096 | E1000_RCTL_BSEX | E1000_RCTL_LPE;
+ break;
+ case E1000_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192 | E1000_RCTL_BSEX | E1000_RCTL_LPE;
+ break;
+ case E1000_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384 | E1000_RCTL_BSEX | E1000_RCTL_LPE;
+ break;
+ }
+#endif
+ E1000_WRITE_REG(hw, RCTL, rctl);
+}
+
+/**
+ * e1000_configure_rx - Configure 8254x Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void
+e1000_configure_rx(struct e1000_hw *hw)
+{
+ unsigned long ptr;
+ unsigned long rctl;
+#if 0
+ unsigned long rxcsum;
+#endif
+ rx_tail = 0;
+ /* make sure receives are disabled while setting up the descriptors */
+ rctl = E1000_READ_REG(hw, RCTL);
+ E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
+#if 0
+ /* set the Receive Delay Timer Register */
+
+ E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
+#endif
+ if (hw->mac_type >= e1000_82540) {
+#if 0
+ E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
+#endif
+ /* Set the interrupt throttling rate. Value is calculated
+ * as DEFAULT_ITR = 1/(MAX_INTS_PER_SEC * 256ns) */
+#define MAX_INTS_PER_SEC 8000
+#define DEFAULT_ITR 1000000000/(MAX_INTS_PER_SEC * 256)
+ E1000_WRITE_REG(hw, ITR, DEFAULT_ITR);
+ }
+
+ /* Setup the Base and Length of the Rx Descriptor Ring */
+ ptr = (u32) rx_pool;
+ if (ptr & 0xf)
+ ptr = (ptr + 0x10) & (~0xf);
+ rx_base = (typeof(rx_base)) ptr;
+ E1000_WRITE_REG(hw, RDBAL, (u32) rx_base);
+ E1000_WRITE_REG(hw, RDBAH, 0);
+
+ E1000_WRITE_REG(hw, RDLEN, 128);
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers */
+ E1000_WRITE_REG(hw, RDH, 0);
+ E1000_WRITE_REG(hw, RDT, 0);
+#if 0
+ /* Enable 82543 Receive Checksum Offload for TCP and UDP */
+ if ((adapter->hw.mac_type >= e1000_82543) && (adapter->rx_csum == TRUE)) {
+ rxcsum = E1000_READ_REG(hw, RXCSUM);
+ rxcsum |= E1000_RXCSUM_TUOFL;
+ E1000_WRITE_REG(hw, RXCSUM, rxcsum);
+ }
+#endif
+ /* Enable Receives */
+
+ E1000_WRITE_REG(hw, RCTL, rctl);
+ fill_rx(hw);
+}
+
+/**************************************************************************
+POLL - Wait for a frame
+***************************************************************************/
+static int
+e1000_poll(struct eth_device *nic)
+{
+ struct e1000_hw *hw = nic->priv;
+ struct e1000_rx_desc *rd;
+ /* return true if there's an ethernet packet ready to read */
+ rd = rx_base + rx_last;
+ if (!(le32_to_cpu(rd->status)) & E1000_RXD_STAT_DD)
+ return 0;
+ /*DEBUGOUT("recv: packet len=%d \n", rd->length); */
+ NetReceive((uchar *)packet, le32_to_cpu(rd->length));
+ fill_rx(hw);
+ return 1;
+}
+
+/**************************************************************************
+TRANSMIT - Transmit a frame
+***************************************************************************/
+static int
+e1000_transmit(struct eth_device *nic, volatile void *packet, int length)
+{
+ struct e1000_hw *hw = nic->priv;
+ struct e1000_tx_desc *txp;
+ int i = 0;
+
+ txp = tx_base + tx_tail;
+ tx_tail = (tx_tail + 1) % 8;
+
+ txp->buffer_addr = cpu_to_le64(virt_to_bus(packet));
+ txp->lower.data = cpu_to_le32(E1000_TXD_CMD_RPS | E1000_TXD_CMD_EOP |
+ E1000_TXD_CMD_IFCS | length);
+ txp->upper.data = 0;
+ E1000_WRITE_REG(hw, TDT, tx_tail);
+
+ while (!(le32_to_cpu(txp->upper.data) & E1000_TXD_STAT_DD)) {
+ if (i++ > TOUT_LOOP) {
+ DEBUGOUT("e1000: tx timeout\n");
+ return 0;
+ }
+ udelay(10); /* give the nic a chance to write to the register */
+ }
+ return 1;
+}
+
+/*reset function*/
+static inline int
+e1000_reset(struct eth_device *nic)
+{
+ struct e1000_hw *hw = nic->priv;
+
+ e1000_reset_hw(hw);
+ if (hw->mac_type >= e1000_82544) {
+ E1000_WRITE_REG(hw, WUC, 0);
+ }
+ return e1000_init_hw(nic);
+}
+
+/**************************************************************************
+DISABLE - Turn off ethernet interface
+***************************************************************************/
+static void
+e1000_disable(struct eth_device *nic)
+{
+ struct e1000_hw *hw = nic->priv;
+
+ /* Turn off the ethernet interface */
+ E1000_WRITE_REG(hw, RCTL, 0);
+ E1000_WRITE_REG(hw, TCTL, 0);
+
+ /* Clear the transmit ring */
+ E1000_WRITE_REG(hw, TDH, 0);
+ E1000_WRITE_REG(hw, TDT, 0);
+
+ /* Clear the receive ring */
+ E1000_WRITE_REG(hw, RDH, 0);
+ E1000_WRITE_REG(hw, RDT, 0);
+
+ /* put the card in its initial state */
+#if 0
+ E1000_WRITE_REG(hw, CTRL, E1000_CTRL_RST);
+#endif
+ mdelay(10);
+
+}
+
+/**************************************************************************
+INIT - set up ethernet interface(s)
+***************************************************************************/
+static int
+e1000_init(struct eth_device *nic, bd_t * bis)
+{
+ struct e1000_hw *hw = nic->priv;
+ int ret_val = 0;
+
+ ret_val = e1000_reset(nic);
+ if (ret_val < 0) {
+ if ((ret_val == -E1000_ERR_NOLINK) ||
+ (ret_val == -E1000_ERR_TIMEOUT)) {
+ E1000_ERR("Valid Link not detected\n");
+ } else {
+ E1000_ERR("Hardware Initialization Failed\n");
+ }
+ return 0;
+ }
+ e1000_configure_tx(hw);
+ e1000_setup_rctl(hw);
+ e1000_configure_rx(hw);
+ return 1;
+}
+
+/**************************************************************************
+PROBE - Look for an adapter, this routine's visible to the outside
+You should omit the last argument struct pci_device * for a non-PCI NIC
+***************************************************************************/
+int
+e1000_initialize(bd_t * bis)
+{
+ pci_dev_t devno;
+ int card_number = 0;
+ struct eth_device *nic = NULL;
+ struct e1000_hw *hw = NULL;
+ u32 iobase;
+ int idx = 0;
+ u32 PciCommandWord;
+
+ while (1) { /* Find PCI device(s) */
+ if ((devno = pci_find_devices(supported, idx++)) < 0) {
+ break;
+ }
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase);
+ iobase &= ~0xf; /* Mask the bits that say "this is an io addr" */
+ DEBUGOUT("e1000#%d: iobase 0x%08x\n", card_number, iobase);
+
+ pci_write_config_dword(devno, PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ /* Check if I/O accesses and Bus Mastering are enabled. */
+ pci_read_config_dword(devno, PCI_COMMAND, &PciCommandWord);
+ if (!(PciCommandWord & PCI_COMMAND_MEMORY)) {
+ printf("Error: Can not enable MEM access.\n");
+ continue;
+ } else if (!(PciCommandWord & PCI_COMMAND_MASTER)) {
+ printf("Error: Can not enable Bus Mastering.\n");
+ continue;
+ }
+
+ nic = (struct eth_device *) malloc(sizeof (*nic));
+ hw = (struct e1000_hw *) malloc(sizeof (*hw));
+ hw->pdev = devno;
+ nic->priv = hw;
+ nic->iobase = bus_to_phys(devno, iobase);
+
+ sprintf(nic->name, "e1000#%d", card_number);
+
+ /* Are these variables needed? */
+#if 0
+ hw->fc = e1000_fc_none;
+ hw->original_fc = e1000_fc_none;
+#else
+ hw->fc = e1000_fc_default;
+ hw->original_fc = e1000_fc_default;
+#endif
+ hw->autoneg_failed = 0;
+ hw->get_link_status = TRUE;
+ hw->hw_addr = (typeof(hw->hw_addr)) iobase;
+ hw->mac_type = e1000_undefined;
+
+ /* MAC and Phy settings */
+ if (e1000_sw_init(nic, card_number) < 0) {
+ free(hw);
+ free(nic);
+ return 0;
+ }
+#ifndef CONFIG_AP1000
+ if (e1000_validate_eeprom_checksum(nic) < 0) {
+ printf("The EEPROM Checksum Is Not Valid\n");
+ free(hw);
+ free(nic);
+ return 0;
+ }
+#endif
+ e1000_read_mac_addr(nic);
+
+ E1000_WRITE_REG(hw, PBA, E1000_DEFAULT_PBA);
+
+ printf("e1000: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ nic->enetaddr[0], nic->enetaddr[1], nic->enetaddr[2],
+ nic->enetaddr[3], nic->enetaddr[4], nic->enetaddr[5]);
+
+ nic->init = e1000_init;
+ nic->recv = e1000_poll;
+ nic->send = e1000_transmit;
+ nic->halt = e1000_disable;
+
+ eth_register(nic);
+
+ card_number++;
+ }
+ return 1;
+}
+
+#endif
diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
new file mode 100644
index 0000000..0fbdc90
--- /dev/null
+++ b/drivers/net/e1000.h
@@ -0,0 +1,1758 @@
+/*******************************************************************************
+
+
+ Copyright(c) 1999 - 2002 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2 of the License, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_hw.h
+ * Structures, enums, and macros for the MAC
+ */
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#define E1000_ERR(args...) printf("e1000: " args)
+
+#ifdef E1000_DEBUG
+#define E1000_DBG(args...) printf("e1000: " args)
+#define DEBUGOUT(fmt,args...) printf(fmt ,##args)
+#define DEBUGFUNC() printf("%s\n", __FUNCTION__);
+#else
+#define E1000_DBG(args...)
+#define DEBUGFUNC()
+#define DEBUGOUT(fmt,args...)
+#endif
+
+/* Forward declarations of structures used by the shared code */
+struct e1000_hw;
+struct e1000_hw_stats;
+
+typedef enum {
+ FALSE = 0,
+ TRUE = 1
+} boolean_t;
+
+/* Enumerated types specific to the e1000 hardware */
+/* Media Access Controlers */
+typedef enum {
+ e1000_undefined = 0,
+ e1000_82542_rev2_0,
+ e1000_82542_rev2_1,
+ e1000_82543,
+ e1000_82544,
+ e1000_82540,
+ e1000_82545,
+ e1000_82546,
+ e1000_num_macs
+} e1000_mac_type;
+
+/* Media Types */
+typedef enum {
+ e1000_media_type_copper = 0,
+ e1000_media_type_fiber = 1,
+ e1000_num_media_types
+} e1000_media_type;
+
+typedef enum {
+ e1000_10_half = 0,
+ e1000_10_full = 1,
+ e1000_100_half = 2,
+ e1000_100_full = 3
+} e1000_speed_duplex_type;
+
+typedef enum {
+ e1000_lan_a = 0,
+ e1000_lan_b = 1
+} e1000_lan_loc;
+
+/* Flow Control Settings */
+typedef enum {
+ e1000_fc_none = 0,
+ e1000_fc_rx_pause = 1,
+ e1000_fc_tx_pause = 2,
+ e1000_fc_full = 3,
+ e1000_fc_default = 0xFF
+} e1000_fc_type;
+
+/* PCI bus types */
+typedef enum {
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix
+} e1000_bus_type;
+
+/* PCI bus speeds */
+typedef enum {
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_133,
+ e1000_bus_speed_reserved
+} e1000_bus_speed;
+
+/* PCI bus widths */
+typedef enum {
+ e1000_bus_width_unknown = 0,
+ e1000_bus_width_32,
+ e1000_bus_width_64
+} e1000_bus_width;
+
+/* PHY status info structure and supporting enums */
+typedef enum {
+ e1000_cable_length_50 = 0,
+ e1000_cable_length_50_80,
+ e1000_cable_length_80_110,
+ e1000_cable_length_110_140,
+ e1000_cable_length_140,
+ e1000_cable_length_undefined = 0xFF
+} e1000_cable_length;
+
+typedef enum {
+ e1000_10bt_ext_dist_enable_normal = 0,
+ e1000_10bt_ext_dist_enable_lower,
+ e1000_10bt_ext_dist_enable_undefined = 0xFF
+} e1000_10bt_ext_dist_enable;
+
+typedef enum {
+ e1000_rev_polarity_normal = 0,
+ e1000_rev_polarity_reversed,
+ e1000_rev_polarity_undefined = 0xFF
+} e1000_rev_polarity;
+
+typedef enum {
+ e1000_polarity_reversal_enabled = 0,
+ e1000_polarity_reversal_disabled,
+ e1000_polarity_reversal_undefined = 0xFF
+} e1000_polarity_reversal;
+
+typedef enum {
+ e1000_auto_x_mode_manual_mdi = 0,
+ e1000_auto_x_mode_manual_mdix,
+ e1000_auto_x_mode_auto1,
+ e1000_auto_x_mode_auto2,
+ e1000_auto_x_mode_undefined = 0xFF
+} e1000_auto_x_mode;
+
+typedef enum {
+ e1000_1000t_rx_status_not_ok = 0,
+ e1000_1000t_rx_status_ok,
+ e1000_1000t_rx_status_undefined = 0xFF
+} e1000_1000t_rx_status;
+
+struct e1000_phy_info {
+ e1000_cable_length cable_length;
+ e1000_10bt_ext_dist_enable extended_10bt_distance;
+ e1000_rev_polarity cable_polarity;
+ e1000_polarity_reversal polarity_correction;
+ e1000_auto_x_mode mdix_mode;
+ e1000_1000t_rx_status local_rx;
+ e1000_1000t_rx_status remote_rx;
+};
+
+struct e1000_phy_stats {
+ uint32_t idle_errors;
+ uint32_t receive_errors;
+};
+
+/* Error Codes */
+#define E1000_SUCCESS 0
+#define E1000_ERR_EEPROM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_TYPE 5
+#define E1000_ERR_NOLINK 6
+#define E1000_ERR_TIMEOUT 7
+
+/* PCI Device IDs */
+#define E1000_DEV_ID_82542 0x1000
+#define E1000_DEV_ID_82543GC_FIBER 0x1001
+#define E1000_DEV_ID_82543GC_COPPER 0x1004
+#define E1000_DEV_ID_82544EI_COPPER 0x1008
+#define E1000_DEV_ID_82544EI_FIBER 0x1009
+#define E1000_DEV_ID_82544GC_COPPER 0x100C
+#define E1000_DEV_ID_82544GC_LOM 0x100D
+#define E1000_DEV_ID_82540EM 0x100E
+#define E1000_DEV_ID_82540EM_LOM 0x1015
+#define E1000_DEV_ID_82545EM_COPPER 0x100F
+#define E1000_DEV_ID_82545EM_FIBER 0x1011
+#define E1000_DEV_ID_82546EB_COPPER 0x1010
+#define E1000_DEV_ID_82546EB_FIBER 0x1012
+#define NUM_DEV_IDS 13
+
+#define NODE_ADDRESS_SIZE 6
+#define ETH_LENGTH_OF_ADDRESS 6
+
+/* MAC decode size is 128K - This is the size of BAR0 */
+#define MAC_DECODE_SIZE (128 * 1024)
+
+#define E1000_82542_2_0_REV_ID 2
+#define E1000_82542_2_1_REV_ID 3
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+/* The sizes (in bytes) of a ethernet packet */
+#define ENET_HEADER_SIZE 14
+#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* With FCS */
+#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
+#define ETHERNET_FCS_SIZE 4
+#define MAXIMUM_ETHERNET_PACKET_SIZE \
+ (MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
+#define MINIMUM_ETHERNET_PACKET_SIZE \
+ (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
+#define CRC_LENGTH ETHERNET_FCS_SIZE
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* 802.1q VLAN Packet Sizes */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+#define ETHERNET_IP_TYPE 0x0800 /* IP packets */
+#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
+
+/* Packet Header defines */
+#define IP_PROTOCOL_TCP 6
+#define IP_PROTOCOL_UDP 0x11
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ */
+#define POLL_IMS_ENABLE_MASK ( \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ)
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXT0 = Receiver Timer Interrupt (ring 0)
+ * o TXDW = Transmit Descriptor Written Back
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ * o LSC = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
+
+/* The number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor. We
+ * reserve one of these spots for our directed address, allowing us room for
+ * E1000_RAR_ENTRIES - 1 multicast addresses.
+ */
+#define E1000_RAR_ENTRIES 16
+
+#define MIN_NUMBER_OF_DESCRIPTORS 8
+#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
+
+/* Receive Descriptor */
+struct e1000_rx_desc {
+ uint64_t buffer_addr; /* Address of the descriptor's data buffer */
+ uint16_t length; /* Length of data DMAed into data buffer */
+ uint16_t csum; /* Packet checksum */
+ uint8_t status; /* Descriptor status */
+ uint8_t errors; /* Descriptor Errors */
+ uint16_t special;
+};
+
+/* Receive Decriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
+#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
+#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define E1000_RXD_SPC_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */
+#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define E1000_RXD_SPC_CFI_SHIFT 0x000C /* CFI is bit 12 */
+
+/* mask to determine if packets should be dropped due to frame errors */
+#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
+
+/* Transmit Descriptor */
+struct e1000_tx_desc {
+ uint64_t buffer_addr; /* Address of the descriptor's data buffer */
+ union {
+ uint32_t data;
+ struct {
+ uint16_t length; /* Data buffer length */
+ uint8_t cso; /* Checksum offset */
+ uint8_t cmd; /* Descriptor control */
+ } flags;
+ } lower;
+ union {
+ uint32_t data;
+ struct {
+ uint8_t status; /* Descriptor status */
+ uint8_t css; /* Checksum start */
+ uint16_t special;
+ } fields;
+ } upper;
+};
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
+#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+
+/* Offload Context Descriptor */
+struct e1000_context_desc {
+ union {
+ uint32_t ip_config;
+ struct {
+ uint8_t ipcss; /* IP checksum start */
+ uint8_t ipcso; /* IP checksum offset */
+ uint16_t ipcse; /* IP checksum end */
+ } ip_fields;
+ } lower_setup;
+ union {
+ uint32_t tcp_config;
+ struct {
+ uint8_t tucss; /* TCP checksum start */
+ uint8_t tucso; /* TCP checksum offset */
+ uint16_t tucse; /* TCP checksum end */
+ } tcp_fields;
+ } upper_setup;
+ uint32_t cmd_and_length; /* */
+ union {
+ uint32_t data;
+ struct {
+ uint8_t status; /* Descriptor status */
+ uint8_t hdr_len; /* Header length */
+ uint16_t mss; /* Maximum segment size */
+ } fields;
+ } tcp_seg_setup;
+};
+
+/* Offload data descriptor */
+struct e1000_data_desc {
+ uint64_t buffer_addr; /* Address of the descriptor's buffer address */
+ union {
+ uint32_t data;
+ struct {
+ uint16_t length; /* Data buffer length */
+ uint8_t typ_len_ext; /* */
+ uint8_t cmd; /* */
+ } flags;
+ } lower;
+ union {
+ uint32_t data;
+ struct {
+ uint8_t status; /* Descriptor status */
+ uint8_t popts; /* Packet Options */
+ uint16_t special; /* */
+ } fields;
+ } upper;
+};
+
+/* Filters */
+#define E1000_NUM_UNICAST 16 /* Unicast filter entries */
+#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address Register */
+struct e1000_rar {
+ volatile uint32_t low; /* receive address low */
+ volatile uint32_t high; /* receive address high */
+};
+
+/* The number of entries in the Multicast Table Array (MTA). */
+#define E1000_NUM_MTA_REGISTERS 128
+
+/* IPv4 Address Table Entry */
+struct e1000_ipv4_at_entry {
+ volatile uint32_t ipv4_addr; /* IP Address (RW) */
+ volatile uint32_t reserved;
+};
+
+/* Four wakeup IP addresses are supported */
+#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
+#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
+#define E1000_IP6AT_SIZE 1
+
+/* IPv6 Address Table Entry */
+struct e1000_ipv6_at_entry {
+ volatile uint8_t ipv6_addr[16];
+};
+
+/* Flexible Filter Length Table Entry */
+struct e1000_fflt_entry {
+ volatile uint32_t length; /* Flexible Filter Length (RW) */
+ volatile uint32_t reserved;
+};
+
+/* Flexible Filter Mask Table Entry */
+struct e1000_ffmt_entry {
+ volatile uint32_t mask; /* Flexible Filter Mask (RW) */
+ volatile uint32_t reserved;
+};
+
+/* Flexible Filter Value Table Entry */
+struct e1000_ffvt_entry {
+ volatile uint32_t value; /* Flexible Filter Value (RW) */
+ volatile uint32_t reserved;
+};
+
+/* Four Flexible Filters are supported */
+#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
+
+#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
+#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+
+/* Register Set. (82543, 82544)
+ *
+ * Registers are defined to be 32 bits and should be accessed as 32 bit values.
+ * These registers are physically located on the NIC, but are mapped into the
+ * host memory address space.
+ *
+ * RW - register is both readable and writable
+ * RO - register is read only
+ * WO - register is write only
+ * R/clr - register is read only and is cleared when read
+ * A - register array
+ */
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_RCTL 0x00100 /* RX Control - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
+#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
+#define E1000_TCTL 0x00400 /* TX Control - RW */
+#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
+#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
+#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
+#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
+#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
+#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
+#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
+#define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */
+#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
+#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
+#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
+#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
+#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
+#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
+#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
+#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
+#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
+#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
+#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
+#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
+#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
+#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
+#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
+#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
+
+/* Register Set (82542)
+ *
+ * Some of the 82542 registers are located at different offsets than they are
+ * in more current versions of the 8254x. Despite the difference in location,
+ * the registers function in the same manner.
+ */
+#define E1000_82542_CTRL E1000_CTRL
+#define E1000_82542_STATUS E1000_STATUS
+#define E1000_82542_EECD E1000_EECD
+#define E1000_82542_EERD E1000_EERD
+#define E1000_82542_CTRL_EXT E1000_CTRL_EXT
+#define E1000_82542_MDIC E1000_MDIC
+#define E1000_82542_FCAL E1000_FCAL
+#define E1000_82542_FCAH E1000_FCAH
+#define E1000_82542_FCT E1000_FCT
+#define E1000_82542_VET E1000_VET
+#define E1000_82542_RA 0x00040
+#define E1000_82542_ICR E1000_ICR
+#define E1000_82542_ITR E1000_ITR
+#define E1000_82542_ICS E1000_ICS
+#define E1000_82542_IMS E1000_IMS
+#define E1000_82542_IMC E1000_IMC
+#define E1000_82542_RCTL E1000_RCTL
+#define E1000_82542_RDTR 0x00108
+#define E1000_82542_RDBAL 0x00110
+#define E1000_82542_RDBAH 0x00114
+#define E1000_82542_RDLEN 0x00118
+#define E1000_82542_RDH 0x00120
+#define E1000_82542_RDT 0x00128
+#define E1000_82542_FCRTH 0x00160
+#define E1000_82542_FCRTL 0x00168
+#define E1000_82542_FCTTV E1000_FCTTV
+#define E1000_82542_TXCW E1000_TXCW
+#define E1000_82542_RXCW E1000_RXCW
+#define E1000_82542_MTA 0x00200
+#define E1000_82542_TCTL E1000_TCTL
+#define E1000_82542_TIPG E1000_TIPG
+#define E1000_82542_TDBAL 0x00420
+#define E1000_82542_TDBAH 0x00424
+#define E1000_82542_TDLEN 0x00428
+#define E1000_82542_TDH 0x00430
+#define E1000_82542_TDT 0x00438
+#define E1000_82542_TIDV 0x00440
+#define E1000_82542_TBT E1000_TBT
+#define E1000_82542_AIT E1000_AIT
+#define E1000_82542_VFTA 0x00600
+#define E1000_82542_LEDCTL E1000_LEDCTL
+#define E1000_82542_PBA E1000_PBA
+#define E1000_82542_RXDCTL E1000_RXDCTL
+#define E1000_82542_RADV E1000_RADV
+#define E1000_82542_RSRPD E1000_RSRPD
+#define E1000_82542_TXDMAC E1000_TXDMAC
+#define E1000_82542_TXDCTL E1000_TXDCTL
+#define E1000_82542_TADV E1000_TADV
+#define E1000_82542_TSPMT E1000_TSPMT
+#define E1000_82542_CRCERRS E1000_CRCERRS
+#define E1000_82542_ALGNERRC E1000_ALGNERRC
+#define E1000_82542_SYMERRS E1000_SYMERRS
+#define E1000_82542_RXERRC E1000_RXERRC
+#define E1000_82542_MPC E1000_MPC
+#define E1000_82542_SCC E1000_SCC
+#define E1000_82542_ECOL E1000_ECOL
+#define E1000_82542_MCC E1000_MCC
+#define E1000_82542_LATECOL E1000_LATECOL
+#define E1000_82542_COLC E1000_COLC
+#define E1000_82542_DC E1000_DC
+#define E1000_82542_TNCRS E1000_TNCRS
+#define E1000_82542_SEC E1000_SEC
+#define E1000_82542_CEXTERR E1000_CEXTERR
+#define E1000_82542_RLEC E1000_RLEC
+#define E1000_82542_XONRXC E1000_XONRXC
+#define E1000_82542_XONTXC E1000_XONTXC
+#define E1000_82542_XOFFRXC E1000_XOFFRXC
+#define E1000_82542_XOFFTXC E1000_XOFFTXC
+#define E1000_82542_FCRUC E1000_FCRUC
+#define E1000_82542_PRC64 E1000_PRC64
+#define E1000_82542_PRC127 E1000_PRC127
+#define E1000_82542_PRC255 E1000_PRC255
+#define E1000_82542_PRC511 E1000_PRC511
+#define E1000_82542_PRC1023 E1000_PRC1023
+#define E1000_82542_PRC1522 E1000_PRC1522
+#define E1000_82542_GPRC E1000_GPRC
+#define E1000_82542_BPRC E1000_BPRC
+#define E1000_82542_MPRC E1000_MPRC
+#define E1000_82542_GPTC E1000_GPTC
+#define E1000_82542_GORCL E1000_GORCL
+#define E1000_82542_GORCH E1000_GORCH
+#define E1000_82542_GOTCL E1000_GOTCL
+#define E1000_82542_GOTCH E1000_GOTCH
+#define E1000_82542_RNBC E1000_RNBC
+#define E1000_82542_RUC E1000_RUC
+#define E1000_82542_RFC E1000_RFC
+#define E1000_82542_ROC E1000_ROC
+#define E1000_82542_RJC E1000_RJC
+#define E1000_82542_MGTPRC E1000_MGTPRC
+#define E1000_82542_MGTPDC E1000_MGTPDC
+#define E1000_82542_MGTPTC E1000_MGTPTC
+#define E1000_82542_TORL E1000_TORL
+#define E1000_82542_TORH E1000_TORH
+#define E1000_82542_TOTL E1000_TOTL
+#define E1000_82542_TOTH E1000_TOTH
+#define E1000_82542_TPR E1000_TPR
+#define E1000_82542_TPT E1000_TPT
+#define E1000_82542_PTC64 E1000_PTC64
+#define E1000_82542_PTC127 E1000_PTC127
+#define E1000_82542_PTC255 E1000_PTC255
+#define E1000_82542_PTC511 E1000_PTC511
+#define E1000_82542_PTC1023 E1000_PTC1023
+#define E1000_82542_PTC1522 E1000_PTC1522
+#define E1000_82542_MPTC E1000_MPTC
+#define E1000_82542_BPTC E1000_BPTC
+#define E1000_82542_TSCTC E1000_TSCTC
+#define E1000_82542_TSCTFC E1000_TSCTFC
+#define E1000_82542_RXCSUM E1000_RXCSUM
+#define E1000_82542_WUC E1000_WUC
+#define E1000_82542_WUFC E1000_WUFC
+#define E1000_82542_WUS E1000_WUS
+#define E1000_82542_MANC E1000_MANC
+#define E1000_82542_IPAV E1000_IPAV
+#define E1000_82542_IP4AT E1000_IP4AT
+#define E1000_82542_IP6AT E1000_IP6AT
+#define E1000_82542_WUPL E1000_WUPL
+#define E1000_82542_WUPM E1000_WUPM
+#define E1000_82542_FFLT E1000_FFLT
+#define E1000_82542_FFMT E1000_FFMT
+#define E1000_82542_FFVT E1000_FFVT
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+ uint64_t crcerrs;
+ uint64_t algnerrc;
+ uint64_t symerrs;
+ uint64_t rxerrc;
+ uint64_t mpc;
+ uint64_t scc;
+ uint64_t ecol;
+ uint64_t mcc;
+ uint64_t latecol;
+ uint64_t colc;
+ uint64_t dc;
+ uint64_t tncrs;
+ uint64_t sec;
+ uint64_t cexterr;
+ uint64_t rlec;
+ uint64_t xonrxc;
+ uint64_t xontxc;
+ uint64_t xoffrxc;
+ uint64_t xofftxc;
+ uint64_t fcruc;
+ uint64_t prc64;
+ uint64_t prc127;
+ uint64_t prc255;
+ uint64_t prc511;
+ uint64_t prc1023;
+ uint64_t prc1522;
+ uint64_t gprc;
+ uint64_t bprc;
+ uint64_t mprc;
+ uint64_t gptc;
+ uint64_t gorcl;
+ uint64_t gorch;
+ uint64_t gotcl;
+ uint64_t gotch;
+ uint64_t rnbc;
+ uint64_t ruc;
+ uint64_t rfc;
+ uint64_t roc;
+ uint64_t rjc;
+ uint64_t mgprc;
+ uint64_t mgpdc;
+ uint64_t mgptc;
+ uint64_t torl;
+ uint64_t torh;
+ uint64_t totl;
+ uint64_t toth;
+ uint64_t tpr;
+ uint64_t tpt;
+ uint64_t ptc64;
+ uint64_t ptc127;
+ uint64_t ptc255;
+ uint64_t ptc511;
+ uint64_t ptc1023;
+ uint64_t ptc1522;
+ uint64_t mptc;
+ uint64_t bptc;
+ uint64_t tsctc;
+ uint64_t tsctfc;
+};
+
+/* Structure containing variables used by the shared code (e1000_hw.c) */
+struct e1000_hw {
+ pci_dev_t pdev;
+ uint8_t *hw_addr;
+ e1000_mac_type mac_type;
+ e1000_media_type media_type;
+ e1000_lan_loc lan_loc;
+ e1000_fc_type fc;
+#if 0
+ e1000_bus_speed bus_speed;
+ e1000_bus_width bus_width;
+ e1000_bus_type bus_type;
+ uint32_t io_base;
+#endif
+ uint32_t phy_id;
+ uint32_t phy_addr;
+ uint32_t original_fc;
+ uint32_t txcw;
+ uint32_t autoneg_failed;
+#if 0
+ uint32_t max_frame_size;
+ uint32_t min_frame_size;
+ uint32_t mc_filter_type;
+ uint32_t num_mc_addrs;
+ uint32_t collision_delta;
+ uint32_t tx_packet_delta;
+ uint32_t ledctl_default;
+ uint32_t ledctl_mode1;
+ uint32_t ledctl_mode2;
+#endif
+ uint16_t autoneg_advertised;
+ uint16_t pci_cmd_word;
+ uint16_t fc_high_water;
+ uint16_t fc_low_water;
+ uint16_t fc_pause_time;
+#if 0
+ uint16_t current_ifs_val;
+ uint16_t ifs_min_val;
+ uint16_t ifs_max_val;
+ uint16_t ifs_step_size;
+ uint16_t ifs_ratio;
+#endif
+ uint16_t device_id;
+ uint16_t vendor_id;
+ uint16_t subsystem_id;
+ uint16_t subsystem_vendor_id;
+ uint8_t revision_id;
+#if 0
+ uint8_t autoneg;
+ uint8_t mdix;
+ uint8_t forced_speed_duplex;
+ uint8_t wait_autoneg_complete;
+ uint8_t dma_fairness;
+#endif
+#if 0
+ uint8_t perm_mac_addr[NODE_ADDRESS_SIZE];
+ boolean_t disable_polarity_correction;
+#endif
+ boolean_t get_link_status;
+ boolean_t tbi_compatibility_en;
+ boolean_t tbi_compatibility_on;
+ boolean_t fc_send_xon;
+ boolean_t report_tx_early;
+#if 0
+ boolean_t adaptive_ifs;
+ boolean_t ifs_params_forced;
+ boolean_t in_ifs_mode;
+#endif
+};
+
+#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */
+#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */
+
+/* Register Bit Masks */
+/* Device Control */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
+#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
+#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
+#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
+#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
+#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
+#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
+#define E1000_STATUS_SPEED_MASK 0x000000C0
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
+#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
+#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
+#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
+#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
+#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
+
+/* Constants used to intrepret the masked PCI-X bus speed. */
+#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
+#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
+#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
+
+/* EEPROM/Flash Control */
+#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
+#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
+#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
+#define E1000_EECD_FWE_MASK 0x00000030
+#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
+#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
+#define E1000_EECD_FWE_SHIFT 4
+#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
+#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
+
+/* EEPROM Read */
+#define E1000_EERD_START 0x00000001 /* Start Read */
+#define E1000_EERD_DONE 0x00000010 /* Read Done */
+#define E1000_EERD_ADDR_SHIFT 8
+#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */
+#define E1000_EERD_DATA_SHIFT 16
+#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
+#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
+#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
+#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
+#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
+#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
+#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
+#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
+#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
+#define E1000_CTRL_EXT_SWDPIN6 0x00000040 /* SWDPIN 6 value */
+#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SWDPIN7 0x00000080 /* SWDPIN 7 value */
+#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
+#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
+#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
+#define E1000_CTRL_EXT_SWDPIO6 0x00000400 /* SWDPIN 6 Input or output */
+#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */
+#define E1000_CTRL_EXT_SWDPIO7 0x00000800 /* SWDPIN 7 Input or output */
+#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
+#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
+#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
+#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
+#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
+#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
+
+/* MDI Control */
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_REG_MASK 0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_MASK 0x03E00000
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_INT_EN 0x20000000
+#define E1000_MDIC_ERROR 0x40000000
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
+#define E1000_LEDCTL_LED1_MODE_SHIFT 8
+#define E1000_LEDCTL_LED1_IVRT 0x00004000
+#define E1000_LEDCTL_LED1_BLINK 0x00008000
+#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
+#define E1000_LEDCTL_LED2_MODE_SHIFT 16
+#define E1000_LEDCTL_LED2_IVRT 0x00400000
+#define E1000_LEDCTL_LED2_BLINK 0x00800000
+#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
+#define E1000_LEDCTL_LED3_MODE_SHIFT 24
+#define E1000_LEDCTL_LED3_IVRT 0x40000000
+#define E1000_LEDCTL_LED3_BLINK 0x80000000
+
+#define E1000_LEDCTL_MODE_LINK_10_1000 0x0
+#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
+#define E1000_LEDCTL_MODE_LINK_UP 0x2
+#define E1000_LEDCTL_MODE_ACTIVITY 0x3
+#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
+#define E1000_LEDCTL_MODE_LINK_10 0x5
+#define E1000_LEDCTL_MODE_LINK_100 0x6
+#define E1000_LEDCTL_MODE_LINK_1000 0x7
+#define E1000_LEDCTL_MODE_PCIX_MODE 0x8
+#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
+#define E1000_LEDCTL_MODE_COLLISION 0xA
+#define E1000_LEDCTL_MODE_BUS_SPEED 0xB
+#define E1000_LEDCTL_MODE_BUS_SIZE 0xC
+#define E1000_LEDCTL_MODE_PAUSED 0xD
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
+
+/* Receive Address */
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXO 0x00000040 /* rx overrun */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
+#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
+#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
+#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
+#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
+#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
+#define E1000_ICR_TXD_LOW 0x00008000
+#define E1000_ICR_SRPD 0x00010000
+
+/* Interrupt Cause Set */
+#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_ICS_SRPD E1000_ICR_SRPD
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMS_SRPD E1000_ICR_SRPD
+
+/* Interrupt Mask Clear */
+#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMC_SRPD E1000_ICR_SRPD
+
+/* Receive Control */
+#define E1000_RCTL_RST 0x00000001 /* Software reset */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
+#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
+#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
+#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
+#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
+#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
+#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
+
+/* Receive Descriptor */
+#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
+#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
+#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */
+#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
+#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
+
+/* Flow Control */
+#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
+#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+
+/* Receive Descriptor Control */
+#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
+#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
+#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
+#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */
+
+/* Transmit Descriptor Control */
+#define E1000_TXDCTL_PTHRESH 0x000000FF /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x0000FF00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x00FF0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
+#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
+#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+
+/* Transmit Configuration Word */
+#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
+#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
+#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
+#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
+#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
+#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
+#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
+#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
+
+/* Receive Configuration Word */
+#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
+#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
+#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
+#define E1000_RXCW_CC 0x10000000 /* Receive config change */
+#define E1000_RXCW_C 0x20000000 /* Receive config */
+#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
+
+/* Transmit Control */
+#define E1000_TCTL_RST 0x00000001 /* software reset */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
+#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
+#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_APME 0x00000001 /* APM Enable */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
+#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
+#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Wake Up Status */
+#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
+#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */
+#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */
+#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */
+#define E1000_WUS_BC 0x00000010 /* Broadcast Received */
+#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */
+#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
+#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
+#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
+#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
+#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
+#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
+#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
+#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
+#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
+#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
+#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
+#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
+#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
+#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
+ * Filtering */
+#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
+#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
+#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
+#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
+#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
+#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
+#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
+
+#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
+#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
+
+/* Wake Up Packet Length */
+#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
+
+#define E1000_MDALIGN 4096
+
+/* EEPROM Commands */
+#define EEPROM_READ_OPCODE 0x6 /* EERPOM read opcode */
+#define EEPROM_WRITE_OPCODE 0x5 /* EERPOM write opcode */
+#define EEPROM_ERASE_OPCODE 0x7 /* EERPOM erase opcode */
+#define EEPROM_EWEN_OPCODE 0x13 /* EERPOM erase/write enable */
+#define EEPROM_EWDS_OPCODE 0x10 /* EERPOM erast/write disable */
+
+/* EEPROM Word Offsets */
+#define EEPROM_COMPAT 0x0003
+#define EEPROM_ID_LED_SETTINGS 0x0004
+#define EEPROM_INIT_CONTROL1_REG 0x000A
+#define EEPROM_INIT_CONTROL2_REG 0x000F
+#define EEPROM_FLASH_VERSION 0x0032
+#define EEPROM_CHECKSUM_REG 0x003F
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+/* Mask bits for fields in Word 0x03 of the EEPROM */
+#define EEPROM_COMPAT_SERVER 0x0400
+#define EEPROM_COMPAT_CLIENT 0x0200
+
+/* Mask bits for fields in Word 0x0a of the EEPROM */
+#define EEPROM_WORD0A_ILOS 0x0010
+#define EEPROM_WORD0A_SWDPIO 0x01E0
+#define EEPROM_WORD0A_LRST 0x0200
+#define EEPROM_WORD0A_FD 0x0400
+#define EEPROM_WORD0A_66MHZ 0x0800
+
+/* Mask bits for fields in Word 0x0f of the EEPROM */
+#define EEPROM_WORD0F_PAUSE_MASK 0x3000
+#define EEPROM_WORD0F_PAUSE 0x1000
+#define EEPROM_WORD0F_ASM_DIR 0x2000
+#define EEPROM_WORD0F_ANE 0x0800
+#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
+
+/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
+#define EEPROM_SUM 0xBABA
+
+/* EEPROM Map defines (WORD OFFSETS)*/
+#define EEPROM_NODE_ADDRESS_BYTE_0 0
+#define EEPROM_PBA_BYTE_1 8
+
+/* EEPROM Map Sizes (Byte Counts) */
+#define PBA_SIZE 4
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD 16
+#define E1000_CT_SHIFT 4
+#define E1000_COLLISION_DISTANCE 64
+#define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_GB_HDX_COLLISION_DISTANCE 512
+#define E1000_COLD_SHIFT 12
+
+/* The number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Default values for the transmit IPG register */
+#define DEFAULT_82542_TIPG_IPGT 10
+#define DEFAULT_82543_TIPG_IPGT_FIBER 9
+#define DEFAULT_82543_TIPG_IPGT_COPPER 8
+
+#define E1000_TIPG_IPGT_MASK 0x000003FF
+#define E1000_TIPG_IPGR1_MASK 0x000FFC00
+#define E1000_TIPG_IPGR2_MASK 0x3FF00000
+
+#define DEFAULT_82542_TIPG_IPGR1 2
+#define DEFAULT_82543_TIPG_IPGR1 8
+#define E1000_TIPG_IPGR1_SHIFT 10
+
+#define DEFAULT_82542_TIPG_IPGR2 10
+#define DEFAULT_82543_TIPG_IPGR2 6
+#define E1000_TIPG_IPGR2_SHIFT 20
+
+#define E1000_TXDMAC_DPP 0x00000001
+
+/* Adaptive IFS defines */
+#define TX_THRESHOLD_START 8
+#define TX_THRESHOLD_INCREMENT 10
+#define TX_THRESHOLD_DECREMENT 1
+#define TX_THRESHOLD_STOP 190
+#define TX_THRESHOLD_DISABLE 0
+#define TX_THRESHOLD_TIMER_MS 10000
+#define MIN_NUM_XMITS 1000
+#define IFS_MAX 80
+#define IFS_STEP 10
+#define IFS_MIN 40
+#define IFS_RATIO 4
+
+/* PBA constants */
+#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
+#define E1000_PBA_24K 0x0018
+#define E1000_PBA_40K 0x0028
+#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
+
+/* The historical defaults for the flow control values are given below. */
+#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
+#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
+#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
+
+/* Flow Control High-Watermark: 43464 bytes */
+#define E1000_FC_HIGH_THRESH 0xA9C8
+/* Flow Control Low-Watermark: 43456 bytes */
+#define E1000_FC_LOW_THRESH 0xA9C0
+/* Flow Control Pause Time: 858 usec */
+#define E1000_FC_PAUSE_TIME 0x0680
+
+/* PCIX Config space */
+#define PCIX_COMMAND_REGISTER 0xE6
+#define PCIX_STATUS_REGISTER_LO 0xE8
+#define PCIX_STATUS_REGISTER_HI 0xEA
+
+#define PCIX_COMMAND_MMRBC_MASK 0x000C
+#define PCIX_COMMAND_MMRBC_SHIFT 0x2
+#define PCIX_STATUS_HI_MMRBC_MASK 0x0060
+#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5
+#define PCIX_STATUS_HI_MMRBC_4K 0x3
+#define PCIX_STATUS_HI_MMRBC_2K 0x2
+
+/* The number of bits that we need to shift right to move the "pause"
+ * bits from the EEPROM (bits 13:12) to the "pause" (bits 8:7) field
+ * in the TXCW register
+ */
+#define PAUSE_SHIFT 5
+
+/* The number of bits that we need to shift left to move the "SWDPIO"
+ * bits from the EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field
+ * in the CTRL register
+ */
+#define SWDPIO_SHIFT 17
+
+/* The number of bits that we need to shift left to move the "SWDPIO_EXT"
+ * bits from the EEPROM word F (bits 7:4) to the bits 11:8 of The
+ * Extended CTRL register.
+ * in the CTRL register
+ */
+#define SWDPIO__EXT_SHIFT 4
+
+/* The number of bits that we need to shift left to move the "ILOS"
+ * bit from the EEPROM (bit 4) to the "ILOS" (bit 7) field
+ * in the CTRL register
+ */
+#define ILOS_SHIFT 3
+
+#define RECEIVE_BUFFER_ALIGN_SIZE (256)
+
+/* The number of milliseconds we wait for auto-negotiation to complete */
+#define LINK_UP_TIMEOUT 500
+
+#define E1000_TX_BUFFER_SIZE ((uint32_t)1514)
+
+/* The carrier extension symbol, as received by the NIC. */
+#define CARRIER_EXTENSION 0x0F
+
+/* TBI_ACCEPT macro definition:
+ *
+ * This macro requires:
+ * adapter = a pointer to struct e1000_hw
+ * status = the 8 bit status field of the RX descriptor with EOP set
+ * error = the 8 bit error field of the RX descriptor with EOP set
+ * length = the sum of all the length fields of the RX descriptors that
+ * make up the current frame
+ * last_byte = the last byte of the frame DMAed by the hardware
+ * max_frame_length = the maximum frame length we want to accept.
+ * min_frame_length = the minimum frame length we want to accept.
+ *
+ * This macro is a conditional that should be used in the interrupt
+ * handler's Rx processing routine when RxErrors have been detected.
+ *
+ * Typical use:
+ * ...
+ * if (TBI_ACCEPT) {
+ * accept_frame = TRUE;
+ * e1000_tbi_adjust_stats(adapter, MacAddress);
+ * frame_length--;
+ * } else {
+ * accept_frame = FALSE;
+ * }
+ * ...
+ */
+
+#define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
+ ((adapter)->tbi_compatibility_on && \
+ (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
+ ((last_byte) == CARRIER_EXTENSION) && \
+ (((status) & E1000_RXD_STAT_VP) ? \
+ (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
+ ((length) <= ((adapter)->max_frame_size + 1))) : \
+ (((length) > (adapter)->min_frame_size) && \
+ ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
+
+/* Structures, enums, and macros for the PHY */
+
+/* Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
+#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
+#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
+#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
+#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
+#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
+#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
+#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CTRL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Regiser */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
+#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
+
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
+#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
+#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
+#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
+#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Autoneg Expansion Register */
+#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
+#define NWAY_ER_PAR_DETECT_FAULT 0x0100 /* LP is 100TX Full Duplex Capable */
+
+/* Next Page TX Register */
+#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
+
+/* Link Partner Next Page Register */
+#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
+#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
+ /* 0=DTE device */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
+#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
+#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
+#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
+#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13
+
+/* Extended Status Register */
+#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
+#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
+#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
+#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+
+#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
+#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
+
+#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
+ /* (0=enable, 1=disable) */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
+ * 0=CLK125 toggling
+ */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
+ * 100BASE-TX/10BASE-T:
+ * MDI Mode
+ */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
+ * all speeds.
+ */
+#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
+ /* 1=Enable Extended 10BASE-T distance
+ * (Lower 10BASE-T RX Threshold)
+ * 0=Normal 10BASE-T RX Threshold */
+#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
+ /* 1=5-Bit interface in 100BASE-TX
+ * 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1
+#define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5
+#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
+ * 3=110-140M;4=>140M */
+#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
+#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
+#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_REV_POLARITY_SHIFT 1
+#define M88E1000_PSSR_MDIX_SHIFT 6
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
+#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
+#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
+
+/* Bit definitions for valid PHY IDs. */
+#define M88E1000_E_PHY_ID 0x01410C50
+#define M88E1000_I_PHY_ID 0x01410C30
+#define M88E1011_I_PHY_ID 0x01410C20
+#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
+#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
+
+/* Miscellaneous PHY bit definitions. */
+#define PHY_PREAMBLE 0xFFFFFFFF
+#define PHY_SOF 0x01
+#define PHY_OP_READ 0x02
+#define PHY_OP_WRITE 0x01
+#define PHY_TURNAROUND 0x02
+#define PHY_PREAMBLE_SIZE 32
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+#define E1000_PHY_ADDRESS 0x01
+#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
+#define REG4_SPEED_MASK 0x01E0
+#define REG9_SPEED_MASK 0x0300
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010
+#define ADVERTISE_1000_FULL 0x0020
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
+
+#endif /* _E1000_HW_H_ */
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
new file mode 100644
index 0000000..738146e
--- /dev/null
+++ b/drivers/net/eepro100.c
@@ -0,0 +1,948 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <miiphy.h>
+
+#undef DEBUG
+
+#if defined(CONFIG_CMD_NET) \
+ && defined(CONFIG_NET_MULTI) && defined(CONFIG_EEPRO100)
+
+ /* Ethernet chip registers.
+ */
+#define SCBStatus 0 /* Rx/Command Unit Status *Word* */
+#define SCBIntAckByte 1 /* Rx/Command Unit STAT/ACK byte */
+#define SCBCmd 2 /* Rx/Command Unit Command *Word* */
+#define SCBIntrCtlByte 3 /* Rx/Command Unit Intr.Control Byte */
+#define SCBPointer 4 /* General purpose pointer. */
+#define SCBPort 8 /* Misc. commands and operands. */
+#define SCBflash 12 /* Flash memory control. */
+#define SCBeeprom 14 /* EEPROM memory control. */
+#define SCBCtrlMDI 16 /* MDI interface control. */
+#define SCBEarlyRx 20 /* Early receive byte count. */
+#define SCBGenControl 28 /* 82559 General Control Register */
+#define SCBGenStatus 29 /* 82559 General Status register */
+
+ /* 82559 SCB status word defnitions
+ */
+#define SCB_STATUS_CX 0x8000 /* CU finished command (transmit) */
+#define SCB_STATUS_FR 0x4000 /* frame received */
+#define SCB_STATUS_CNA 0x2000 /* CU left active state */
+#define SCB_STATUS_RNR 0x1000 /* receiver left ready state */
+#define SCB_STATUS_MDI 0x0800 /* MDI read/write cycle done */
+#define SCB_STATUS_SWI 0x0400 /* software generated interrupt */
+#define SCB_STATUS_FCP 0x0100 /* flow control pause interrupt */
+
+#define SCB_INTACK_MASK 0xFD00 /* all the above */
+
+#define SCB_INTACK_TX (SCB_STATUS_CX | SCB_STATUS_CNA)
+#define SCB_INTACK_RX (SCB_STATUS_FR | SCB_STATUS_RNR)
+
+ /* System control block commands
+ */
+/* CU Commands */
+#define CU_NOP 0x0000
+#define CU_START 0x0010
+#define CU_RESUME 0x0020
+#define CU_STATSADDR 0x0040 /* Load Dump Statistics ctrs addr */
+#define CU_SHOWSTATS 0x0050 /* Dump statistics counters. */
+#define CU_ADDR_LOAD 0x0060 /* Base address to add to CU commands */
+#define CU_DUMPSTATS 0x0070 /* Dump then reset stats counters. */
+
+/* RUC Commands */
+#define RUC_NOP 0x0000
+#define RUC_START 0x0001
+#define RUC_RESUME 0x0002
+#define RUC_ABORT 0x0004
+#define RUC_ADDR_LOAD 0x0006 /* (seems not to clear on acceptance) */
+#define RUC_RESUMENR 0x0007
+
+#define CU_CMD_MASK 0x00f0
+#define RU_CMD_MASK 0x0007
+
+#define SCB_M 0x0100 /* 0 = enable interrupt, 1 = disable */
+#define SCB_SWI 0x0200 /* 1 - cause device to interrupt */
+
+#define CU_STATUS_MASK 0x00C0
+#define RU_STATUS_MASK 0x003C
+
+#define RU_STATUS_IDLE (0<<2)
+#define RU_STATUS_SUS (1<<2)
+#define RU_STATUS_NORES (2<<2)
+#define RU_STATUS_READY (4<<2)
+#define RU_STATUS_NO_RBDS_SUS ((1<<2)|(8<<2))
+#define RU_STATUS_NO_RBDS_NORES ((2<<2)|(8<<2))
+#define RU_STATUS_NO_RBDS_READY ((4<<2)|(8<<2))
+
+ /* 82559 Port interface commands.
+ */
+#define I82559_RESET 0x00000000 /* Software reset */
+#define I82559_SELFTEST 0x00000001 /* 82559 Selftest command */
+#define I82559_SELECTIVE_RESET 0x00000002
+#define I82559_DUMP 0x00000003
+#define I82559_DUMP_WAKEUP 0x00000007
+
+ /* 82559 Eeprom interface.
+ */
+#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */
+#define EE_CS 0x02 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x01
+#define EE_WRITE_1 0x05
+#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
+#define EE_ENB (0x4800 | EE_CS)
+#define EE_CMD_BITS 3
+#define EE_DATA_BITS 16
+
+ /* The EEPROM commands include the alway-set leading bit.
+ */
+#define EE_EWENB_CMD (4 << addr_len)
+#define EE_WRITE_CMD (5 << addr_len)
+#define EE_READ_CMD (6 << addr_len)
+#define EE_ERASE_CMD (7 << addr_len)
+
+ /* Receive frame descriptors.
+ */
+struct RxFD {
+ volatile u16 status;
+ volatile u16 control;
+ volatile u32 link; /* struct RxFD * */
+ volatile u32 rx_buf_addr; /* void * */
+ volatile u32 count;
+
+ volatile u8 data[PKTSIZE_ALIGN];
+};
+
+#define RFD_STATUS_C 0x8000 /* completion of received frame */
+#define RFD_STATUS_OK 0x2000 /* frame received with no errors */
+
+#define RFD_CONTROL_EL 0x8000 /* 1=last RFD in RFA */
+#define RFD_CONTROL_S 0x4000 /* 1=suspend RU after receiving frame */
+#define RFD_CONTROL_H 0x0010 /* 1=RFD is a header RFD */
+#define RFD_CONTROL_SF 0x0008 /* 0=simplified, 1=flexible mode */
+
+#define RFD_COUNT_MASK 0x3fff
+#define RFD_COUNT_F 0x4000
+#define RFD_COUNT_EOF 0x8000
+
+#define RFD_RX_CRC 0x0800 /* crc error */
+#define RFD_RX_ALIGNMENT 0x0400 /* alignment error */
+#define RFD_RX_RESOURCE 0x0200 /* out of space, no resources */
+#define RFD_RX_DMA_OVER 0x0100 /* DMA overrun */
+#define RFD_RX_SHORT 0x0080 /* short frame error */
+#define RFD_RX_LENGTH 0x0020
+#define RFD_RX_ERROR 0x0010 /* receive error */
+#define RFD_RX_NO_ADR_MATCH 0x0004 /* no address match */
+#define RFD_RX_IA_MATCH 0x0002 /* individual address does not match */
+#define RFD_RX_TCO 0x0001 /* TCO indication */
+
+ /* Transmit frame descriptors
+ */
+struct TxFD { /* Transmit frame descriptor set. */
+ volatile u16 status;
+ volatile u16 command;
+ volatile u32 link; /* void * */
+ volatile u32 tx_desc_addr; /* Always points to the tx_buf_addr element. */
+ volatile s32 count;
+
+ volatile u32 tx_buf_addr0; /* void *, frame to be transmitted. */
+ volatile s32 tx_buf_size0; /* Length of Tx frame. */
+ volatile u32 tx_buf_addr1; /* void *, frame to be transmitted. */
+ volatile s32 tx_buf_size1; /* Length of Tx frame. */
+};
+
+#define TxCB_CMD_TRANSMIT 0x0004 /* transmit command */
+#define TxCB_CMD_SF 0x0008 /* 0=simplified, 1=flexible mode */
+#define TxCB_CMD_NC 0x0010 /* 0=CRC insert by controller */
+#define TxCB_CMD_I 0x2000 /* generate interrupt on completion */
+#define TxCB_CMD_S 0x4000 /* suspend on completion */
+#define TxCB_CMD_EL 0x8000 /* last command block in CBL */
+
+#define TxCB_COUNT_MASK 0x3fff
+#define TxCB_COUNT_EOF 0x8000
+
+ /* The Speedo3 Rx and Tx frame/buffer descriptors.
+ */
+struct descriptor { /* A generic descriptor. */
+ volatile u16 status;
+ volatile u16 command;
+ volatile u32 link; /* struct descriptor * */
+
+ unsigned char params[0];
+};
+
+#define CFG_CMD_EL 0x8000
+#define CFG_CMD_SUSPEND 0x4000
+#define CFG_CMD_INT 0x2000
+#define CFG_CMD_IAS 0x0001 /* individual address setup */
+#define CFG_CMD_CONFIGURE 0x0002 /* configure */
+
+#define CFG_STATUS_C 0x8000
+#define CFG_STATUS_OK 0x2000
+
+ /* Misc.
+ */
+#define NUM_RX_DESC PKTBUFSRX
+#define NUM_TX_DESC 1 /* Number of TX descriptors */
+
+#define TOUT_LOOP 1000000
+
+#define ETH_ALEN 6
+
+static struct RxFD rx_ring[NUM_RX_DESC]; /* RX descriptor ring */
+static struct TxFD tx_ring[NUM_TX_DESC]; /* TX descriptor ring */
+static int rx_next; /* RX descriptor ring pointer */
+static int tx_next; /* TX descriptor ring pointer */
+static int tx_threshold;
+
+/*
+ * The parameters for a CmdConfigure operation.
+ * There are so many options that it would be difficult to document
+ * each bit. We mostly use the default or recommended settings.
+ */
+static const char i82557_config_cmd[] = {
+ 22, 0x08, 0, 0, 0, 0, 0x32, 0x03, 1, /* 1=Use MII 0=Use AUI */
+ 0, 0x2E, 0, 0x60, 0,
+ 0xf2, 0x48, 0, 0x40, 0xf2, 0x80, /* 0x40=Force full-duplex */
+ 0x3f, 0x05,
+};
+static const char i82558_config_cmd[] = {
+ 22, 0x08, 0, 1, 0, 0, 0x22, 0x03, 1, /* 1=Use MII 0=Use AUI */
+ 0, 0x2E, 0, 0x60, 0x08, 0x88,
+ 0x68, 0, 0x40, 0xf2, 0x84, /* Disable FC */
+ 0x31, 0x05,
+};
+
+static void init_rx_ring (struct eth_device *dev);
+static void purge_tx_ring (struct eth_device *dev);
+
+static void read_hw_addr (struct eth_device *dev, bd_t * bis);
+
+static int eepro100_init (struct eth_device *dev, bd_t * bis);
+static int eepro100_send (struct eth_device *dev, volatile void *packet,
+ int length);
+static int eepro100_recv (struct eth_device *dev);
+static void eepro100_halt (struct eth_device *dev);
+
+#if defined(CONFIG_E500) || defined(CONFIG_DB64360) || defined(CONFIG_DB64460)
+#define bus_to_phys(a) (a)
+#define phys_to_bus(a) (a)
+#else
+#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
+#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+#endif
+
+static inline int INW (struct eth_device *dev, u_long addr)
+{
+ return le16_to_cpu (*(volatile u16 *) (addr + dev->iobase));
+}
+
+static inline void OUTW (struct eth_device *dev, int command, u_long addr)
+{
+ *(volatile u16 *) ((addr + dev->iobase)) = cpu_to_le16 (command);
+}
+
+static inline void OUTL (struct eth_device *dev, int command, u_long addr)
+{
+ *(volatile u32 *) ((addr + dev->iobase)) = cpu_to_le32 (command);
+}
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+static inline int INL (struct eth_device *dev, u_long addr)
+{
+ return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase));
+}
+
+static int get_phyreg (struct eth_device *dev, unsigned char addr,
+ unsigned char reg, unsigned short *value)
+{
+ int cmd;
+ int timeout = 50;
+
+ /* read requested data */
+ cmd = (2 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
+ OUTL (dev, cmd, SCBCtrlMDI);
+
+ do {
+ udelay(1000);
+ cmd = INL (dev, SCBCtrlMDI);
+ } while (!(cmd & (1 << 28)) && (--timeout));
+
+ if (timeout == 0)
+ return -1;
+
+ *value = (unsigned short) (cmd & 0xffff);
+
+ return 0;
+}
+
+static int set_phyreg (struct eth_device *dev, unsigned char addr,
+ unsigned char reg, unsigned short value)
+{
+ int cmd;
+ int timeout = 50;
+
+ /* write requested data */
+ cmd = (1 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
+ OUTL (dev, cmd | value, SCBCtrlMDI);
+
+ while (!(INL (dev, SCBCtrlMDI) & (1 << 28)) && (--timeout))
+ udelay(1000);
+
+ if (timeout == 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check if given phyaddr is valid, i.e. there is a PHY connected.
+ * Do this by checking model value field from ID2 register.
+ */
+static struct eth_device* verify_phyaddr (char *devname, unsigned char addr)
+{
+ struct eth_device *dev;
+ unsigned short value;
+ unsigned char model;
+
+ dev = eth_get_dev_by_name(devname);
+ if (dev == NULL) {
+ printf("%s: no such device\n", devname);
+ return NULL;
+ }
+
+ /* read id2 register */
+ if (get_phyreg(dev, addr, PHY_PHYIDR2, &value) != 0) {
+ printf("%s: mii read timeout!\n", devname);
+ return NULL;
+ }
+
+ /* get model */
+ model = (unsigned char)((value >> 4) & 0x003f);
+
+ if (model == 0) {
+ printf("%s: no PHY at address %d\n", devname, addr);
+ return NULL;
+ }
+
+ return dev;
+}
+
+static int eepro100_miiphy_read (char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value)
+{
+ struct eth_device *dev;
+
+ dev = verify_phyaddr(devname, addr);
+ if (dev == NULL)
+ return -1;
+
+ if (get_phyreg(dev, addr, reg, value) != 0) {
+ printf("%s: mii read timeout!\n", devname);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int eepro100_miiphy_write (char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value)
+{
+ struct eth_device *dev;
+
+ dev = verify_phyaddr(devname, addr);
+ if (dev == NULL)
+ return -1;
+
+ if (set_phyreg(dev, addr, reg, value) != 0) {
+ printf("%s: mii write timeout!\n", devname);
+ return -1;
+ }
+
+ return 0;
+}
+
+#endif
+
+/* Wait for the chip get the command.
+*/
+static int wait_for_eepro100 (struct eth_device *dev)
+{
+ int i;
+
+ for (i = 0; INW (dev, SCBCmd) & (CU_CMD_MASK | RU_CMD_MASK); i++) {
+ if (i >= TOUT_LOOP) {
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82557},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82559},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82559ER},
+ {}
+};
+
+int eepro100_initialize (bd_t * bis)
+{
+ pci_dev_t devno;
+ int card_number = 0;
+ struct eth_device *dev;
+ u32 iobase, status;
+ int idx = 0;
+
+ while (1) {
+ /* Find PCI device
+ */
+ if ((devno = pci_find_devices (supported, idx++)) < 0) {
+ break;
+ }
+
+ pci_read_config_dword (devno, PCI_BASE_ADDRESS_0, &iobase);
+ iobase &= ~0xf;
+
+#ifdef DEBUG
+ printf ("eepro100: Intel i82559 PCI EtherExpressPro @0x%x\n",
+ iobase);
+#endif
+
+ pci_write_config_dword (devno,
+ PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+ /* Check if I/O accesses and Bus Mastering are enabled.
+ */
+ pci_read_config_dword (devno, PCI_COMMAND, &status);
+ if (!(status & PCI_COMMAND_MEMORY)) {
+ printf ("Error: Can not enable MEM access.\n");
+ continue;
+ }
+
+ if (!(status & PCI_COMMAND_MASTER)) {
+ printf ("Error: Can not enable Bus Mastering.\n");
+ continue;
+ }
+
+ dev = (struct eth_device *) malloc (sizeof *dev);
+
+ sprintf (dev->name, "i82559#%d", card_number);
+ dev->priv = (void *) devno; /* this have to come before bus_to_phys() */
+ dev->iobase = bus_to_phys (iobase);
+ dev->init = eepro100_init;
+ dev->halt = eepro100_halt;
+ dev->send = eepro100_send;
+ dev->recv = eepro100_recv;
+
+ eth_register (dev);
+
+#if defined (CONFIG_MII) || defined(CONFIG_CMD_MII)
+ /* register mii command access routines */
+ miiphy_register(dev->name,
+ eepro100_miiphy_read, eepro100_miiphy_write);
+#endif
+
+ card_number++;
+
+ /* Set the latency timer for value.
+ */
+ pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20);
+
+ udelay (10 * 1000);
+
+ read_hw_addr (dev, bis);
+ }
+
+ return card_number;
+}
+
+
+static int eepro100_init (struct eth_device *dev, bd_t * bis)
+{
+ int i, status = 0;
+ int tx_cur;
+ struct descriptor *ias_cmd, *cfg_cmd;
+
+ /* Reset the ethernet controller
+ */
+ OUTL (dev, I82559_SELECTIVE_RESET, SCBPort);
+ udelay (20);
+
+ OUTL (dev, I82559_RESET, SCBPort);
+ udelay (20);
+
+ if (!wait_for_eepro100 (dev)) {
+ printf ("Error: Can not reset ethernet controller.\n");
+ goto Done;
+ }
+ OUTL (dev, 0, SCBPointer);
+ OUTW (dev, SCB_M | RUC_ADDR_LOAD, SCBCmd);
+
+ if (!wait_for_eepro100 (dev)) {
+ printf ("Error: Can not reset ethernet controller.\n");
+ goto Done;
+ }
+ OUTL (dev, 0, SCBPointer);
+ OUTW (dev, SCB_M | CU_ADDR_LOAD, SCBCmd);
+
+ /* Initialize Rx and Tx rings.
+ */
+ init_rx_ring (dev);
+ purge_tx_ring (dev);
+
+ /* Tell the adapter where the RX ring is located.
+ */
+ if (!wait_for_eepro100 (dev)) {
+ printf ("Error: Can not reset ethernet controller.\n");
+ goto Done;
+ }
+
+ OUTL (dev, phys_to_bus ((u32) & rx_ring[rx_next]), SCBPointer);
+ OUTW (dev, SCB_M | RUC_START, SCBCmd);
+
+ /* Send the Configure frame */
+ tx_cur = tx_next;
+ tx_next = ((tx_next + 1) % NUM_TX_DESC);
+
+ cfg_cmd = (struct descriptor *) &tx_ring[tx_cur];
+ cfg_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_CONFIGURE));
+ cfg_cmd->status = 0;
+ cfg_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
+
+ memcpy (cfg_cmd->params, i82558_config_cmd,
+ sizeof (i82558_config_cmd));
+
+ if (!wait_for_eepro100 (dev)) {
+ printf ("Error---CFG_CMD_CONFIGURE: Can not reset ethernet controller.\n");
+ goto Done;
+ }
+
+ OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
+ OUTW (dev, SCB_M | CU_START, SCBCmd);
+
+ for (i = 0;
+ !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+ i++) {
+ if (i >= TOUT_LOOP) {
+ printf ("%s: Tx error buffer not ready\n", dev->name);
+ goto Done;
+ }
+ }
+
+ if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+ printf ("TX error status = 0x%08X\n",
+ le16_to_cpu (tx_ring[tx_cur].status));
+ goto Done;
+ }
+
+ /* Send the Individual Address Setup frame
+ */
+ tx_cur = tx_next;
+ tx_next = ((tx_next + 1) % NUM_TX_DESC);
+
+ ias_cmd = (struct descriptor *) &tx_ring[tx_cur];
+ ias_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_IAS));
+ ias_cmd->status = 0;
+ ias_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
+
+ memcpy (ias_cmd->params, dev->enetaddr, 6);
+
+ /* Tell the adapter where the TX ring is located.
+ */
+ if (!wait_for_eepro100 (dev)) {
+ printf ("Error: Can not reset ethernet controller.\n");
+ goto Done;
+ }
+
+ OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
+ OUTW (dev, SCB_M | CU_START, SCBCmd);
+
+ for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+ i++) {
+ if (i >= TOUT_LOOP) {
+ printf ("%s: Tx error buffer not ready\n",
+ dev->name);
+ goto Done;
+ }
+ }
+
+ if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+ printf ("TX error status = 0x%08X\n",
+ le16_to_cpu (tx_ring[tx_cur].status));
+ goto Done;
+ }
+
+ status = 1;
+
+ Done:
+ return status;
+}
+
+static int eepro100_send (struct eth_device *dev, volatile void *packet, int length)
+{
+ int i, status = -1;
+ int tx_cur;
+
+ if (length <= 0) {
+ printf ("%s: bad packet size: %d\n", dev->name, length);
+ goto Done;
+ }
+
+ tx_cur = tx_next;
+ tx_next = (tx_next + 1) % NUM_TX_DESC;
+
+ tx_ring[tx_cur].command = cpu_to_le16 ( TxCB_CMD_TRANSMIT |
+ TxCB_CMD_SF |
+ TxCB_CMD_S |
+ TxCB_CMD_EL );
+ tx_ring[tx_cur].status = 0;
+ tx_ring[tx_cur].count = cpu_to_le32 (tx_threshold);
+ tx_ring[tx_cur].link =
+ cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
+ tx_ring[tx_cur].tx_desc_addr =
+ cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_cur].tx_buf_addr0));
+ tx_ring[tx_cur].tx_buf_addr0 =
+ cpu_to_le32 (phys_to_bus ((u_long) packet));
+ tx_ring[tx_cur].tx_buf_size0 = cpu_to_le32 (length);
+
+ if (!wait_for_eepro100 (dev)) {
+ printf ("%s: Tx error ethernet controller not ready.\n",
+ dev->name);
+ goto Done;
+ }
+
+ /* Send the packet.
+ */
+ OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
+ OUTW (dev, SCB_M | CU_START, SCBCmd);
+
+ for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+ i++) {
+ if (i >= TOUT_LOOP) {
+ printf ("%s: Tx error buffer not ready\n", dev->name);
+ goto Done;
+ }
+ }
+
+ if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+ printf ("TX error status = 0x%08X\n",
+ le16_to_cpu (tx_ring[tx_cur].status));
+ goto Done;
+ }
+
+ status = length;
+
+ Done:
+ return status;
+}
+
+static int eepro100_recv (struct eth_device *dev)
+{
+ u16 status, stat;
+ int rx_prev, length = 0;
+
+ stat = INW (dev, SCBStatus);
+ OUTW (dev, stat & SCB_STATUS_RNR, SCBStatus);
+
+ for (;;) {
+ status = le16_to_cpu (rx_ring[rx_next].status);
+
+ if (!(status & RFD_STATUS_C)) {
+ break;
+ }
+
+ /* Valid frame status.
+ */
+ if ((status & RFD_STATUS_OK)) {
+ /* A valid frame received.
+ */
+ length = le32_to_cpu (rx_ring[rx_next].count) & 0x3fff;
+
+ /* Pass the packet up to the protocol
+ * layers.
+ */
+ NetReceive (rx_ring[rx_next].data, length);
+ } else {
+ /* There was an error.
+ */
+ printf ("RX error status = 0x%08X\n", status);
+ }
+
+ rx_ring[rx_next].control = cpu_to_le16 (RFD_CONTROL_S);
+ rx_ring[rx_next].status = 0;
+ rx_ring[rx_next].count = cpu_to_le32 (PKTSIZE_ALIGN << 16);
+
+ rx_prev = (rx_next + NUM_RX_DESC - 1) % NUM_RX_DESC;
+ rx_ring[rx_prev].control = 0;
+
+ /* Update entry information.
+ */
+ rx_next = (rx_next + 1) % NUM_RX_DESC;
+ }
+
+ if (stat & SCB_STATUS_RNR) {
+
+ printf ("%s: Receiver is not ready, restart it !\n", dev->name);
+
+ /* Reinitialize Rx ring.
+ */
+ init_rx_ring (dev);
+
+ if (!wait_for_eepro100 (dev)) {
+ printf ("Error: Can not restart ethernet controller.\n");
+ goto Done;
+ }
+
+ OUTL (dev, phys_to_bus ((u32) & rx_ring[rx_next]), SCBPointer);
+ OUTW (dev, SCB_M | RUC_START, SCBCmd);
+ }
+
+ Done:
+ return length;
+}
+
+static void eepro100_halt (struct eth_device *dev)
+{
+ /* Reset the ethernet controller
+ */
+ OUTL (dev, I82559_SELECTIVE_RESET, SCBPort);
+ udelay (20);
+
+ OUTL (dev, I82559_RESET, SCBPort);
+ udelay (20);
+
+ if (!wait_for_eepro100 (dev)) {
+ printf ("Error: Can not reset ethernet controller.\n");
+ goto Done;
+ }
+ OUTL (dev, 0, SCBPointer);
+ OUTW (dev, SCB_M | RUC_ADDR_LOAD, SCBCmd);
+
+ if (!wait_for_eepro100 (dev)) {
+ printf ("Error: Can not reset ethernet controller.\n");
+ goto Done;
+ }
+ OUTL (dev, 0, SCBPointer);
+ OUTW (dev, SCB_M | CU_ADDR_LOAD, SCBCmd);
+
+ Done:
+ return;
+}
+
+ /* SROM Read.
+ */
+static int read_eeprom (struct eth_device *dev, int location, int addr_len)
+{
+ unsigned short retval = 0;
+ int read_cmd = location | EE_READ_CMD;
+ int i;
+
+ OUTW (dev, EE_ENB & ~EE_CS, SCBeeprom);
+ OUTW (dev, EE_ENB, SCBeeprom);
+
+ /* Shift the read command bits out. */
+ for (i = 12; i >= 0; i--) {
+ short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+
+ OUTW (dev, EE_ENB | dataval, SCBeeprom);
+ udelay (1);
+ OUTW (dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom);
+ udelay (1);
+ }
+ OUTW (dev, EE_ENB, SCBeeprom);
+
+ for (i = 15; i >= 0; i--) {
+ OUTW (dev, EE_ENB | EE_SHIFT_CLK, SCBeeprom);
+ udelay (1);
+ retval = (retval << 1) |
+ ((INW (dev, SCBeeprom) & EE_DATA_READ) ? 1 : 0);
+ OUTW (dev, EE_ENB, SCBeeprom);
+ udelay (1);
+ }
+
+ /* Terminate the EEPROM access. */
+ OUTW (dev, EE_ENB & ~EE_CS, SCBeeprom);
+ return retval;
+}
+
+#ifdef CONFIG_EEPRO100_SROM_WRITE
+int eepro100_write_eeprom (struct eth_device* dev, int location, int addr_len, unsigned short data)
+{
+ unsigned short dataval;
+ int enable_cmd = 0x3f | EE_EWENB_CMD;
+ int write_cmd = location | EE_WRITE_CMD;
+ int i;
+ unsigned long datalong, tmplong;
+
+ OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom);
+ udelay(1);
+ OUTW(dev, EE_ENB, SCBeeprom);
+
+ /* Shift the enable command bits out. */
+ for (i = (addr_len+EE_CMD_BITS-1); i >= 0; i--)
+ {
+ dataval = (enable_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ OUTW(dev, EE_ENB | dataval, SCBeeprom);
+ udelay(1);
+ OUTW(dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom);
+ udelay(1);
+ }
+
+ OUTW(dev, EE_ENB, SCBeeprom);
+ udelay(1);
+ OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom);
+ udelay(1);
+ OUTW(dev, EE_ENB, SCBeeprom);
+
+
+ /* Shift the write command bits out. */
+ for (i = (addr_len+EE_CMD_BITS-1); i >= 0; i--)
+ {
+ dataval = (write_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ OUTW(dev, EE_ENB | dataval, SCBeeprom);
+ udelay(1);
+ OUTW(dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom);
+ udelay(1);
+ }
+
+ /* Write the data */
+ datalong= (unsigned long) ((((data) & 0x00ff) << 8) | ( (data) >> 8));
+
+ for (i = 0; i< EE_DATA_BITS; i++)
+ {
+ /* Extract and move data bit to bit DI */
+ dataval = ((datalong & 0x8000)>>13) ? EE_DATA_WRITE : 0;
+
+ OUTW(dev, EE_ENB | dataval, SCBeeprom);
+ udelay(1);
+ OUTW(dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom);
+ udelay(1);
+ OUTW(dev, EE_ENB | dataval, SCBeeprom);
+ udelay(1);
+
+ datalong = datalong << 1; /* Adjust significant data bit*/
+ }
+
+ /* Finish up command (toggle CS) */
+ OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom);
+ udelay(1); /* delay for more than 250 ns */
+ OUTW(dev, EE_ENB, SCBeeprom);
+
+ /* Wait for programming ready (D0 = 1) */
+ tmplong = 10;
+ do
+ {
+ dataval = INW(dev, SCBeeprom);
+ if (dataval & EE_DATA_READ)
+ break;
+ udelay(10000);
+ }
+ while (-- tmplong);
+
+ if (tmplong == 0)
+ {
+ printf ("Write i82559 eeprom timed out (100 ms waiting for data ready.\n");
+ return -1;
+ }
+
+ /* Terminate the EEPROM access. */
+ OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom);
+
+ return 0;
+}
+#endif
+
+static void init_rx_ring (struct eth_device *dev)
+{
+ int i;
+
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ rx_ring[i].status = 0;
+ rx_ring[i].control =
+ (i == NUM_RX_DESC - 1) ? cpu_to_le16 (RFD_CONTROL_S) : 0;
+ rx_ring[i].link =
+ cpu_to_le32 (phys_to_bus
+ ((u32) & rx_ring[(i + 1) % NUM_RX_DESC]));
+ rx_ring[i].rx_buf_addr = 0xffffffff;
+ rx_ring[i].count = cpu_to_le32 (PKTSIZE_ALIGN << 16);
+ }
+
+ rx_next = 0;
+}
+
+static void purge_tx_ring (struct eth_device *dev)
+{
+ int i;
+
+ tx_next = 0;
+ tx_threshold = 0x01208000;
+
+ for (i = 0; i < NUM_TX_DESC; i++) {
+ tx_ring[i].status = 0;
+ tx_ring[i].command = 0;
+ tx_ring[i].link = 0;
+ tx_ring[i].tx_desc_addr = 0;
+ tx_ring[i].count = 0;
+
+ tx_ring[i].tx_buf_addr0 = 0;
+ tx_ring[i].tx_buf_size0 = 0;
+ tx_ring[i].tx_buf_addr1 = 0;
+ tx_ring[i].tx_buf_size1 = 0;
+ }
+}
+
+static void read_hw_addr (struct eth_device *dev, bd_t * bis)
+{
+ u16 eeprom[0x40];
+ u16 sum = 0;
+ int i, j;
+ int addr_len = read_eeprom (dev, 0, 6) == 0xffff ? 8 : 6;
+
+ for (j = 0, i = 0; i < 0x40; i++) {
+ u16 value = read_eeprom (dev, i, addr_len);
+
+ eeprom[i] = value;
+ sum += value;
+ if (i < 3) {
+ dev->enetaddr[j++] = value;
+ dev->enetaddr[j++] = value >> 8;
+ }
+ }
+
+ if (sum != 0xBABA) {
+ memset (dev->enetaddr, 0, ETH_ALEN);
+#ifdef DEBUG
+ printf ("%s: Invalid EEPROM checksum %#4.4x, "
+ "check settings before activating this device!\n",
+ dev->name, sum);
+#endif
+ }
+}
+
+#endif
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
new file mode 100644
index 0000000..98303ac
--- /dev/null
+++ b/drivers/net/enc28j60.c
@@ -0,0 +1,983 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#ifdef CONFIG_ENC28J60
+#include <net.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spi.h>
+
+/*
+ * Control Registers in Bank 0
+ */
+
+#define CTL_REG_ERDPTL 0x00
+#define CTL_REG_ERDPTH 0x01
+#define CTL_REG_EWRPTL 0x02
+#define CTL_REG_EWRPTH 0x03
+#define CTL_REG_ETXSTL 0x04
+#define CTL_REG_ETXSTH 0x05
+#define CTL_REG_ETXNDL 0x06
+#define CTL_REG_ETXNDH 0x07
+#define CTL_REG_ERXSTL 0x08
+#define CTL_REG_ERXSTH 0x09
+#define CTL_REG_ERXNDL 0x0A
+#define CTL_REG_ERXNDH 0x0B
+#define CTL_REG_ERXRDPTL 0x0C
+#define CTL_REG_ERXRDPTH 0x0D
+#define CTL_REG_ERXWRPTL 0x0E
+#define CTL_REG_ERXWRPTH 0x0F
+#define CTL_REG_EDMASTL 0x10
+#define CTL_REG_EDMASTH 0x11
+#define CTL_REG_EDMANDL 0x12
+#define CTL_REG_EDMANDH 0x13
+#define CTL_REG_EDMADSTL 0x14
+#define CTL_REG_EDMADSTH 0x15
+#define CTL_REG_EDMACSL 0x16
+#define CTL_REG_EDMACSH 0x17
+/* these are common in all banks */
+#define CTL_REG_EIE 0x1B
+#define CTL_REG_EIR 0x1C
+#define CTL_REG_ESTAT 0x1D
+#define CTL_REG_ECON2 0x1E
+#define CTL_REG_ECON1 0x1F
+
+/*
+ * Control Registers in Bank 1
+ */
+
+#define CTL_REG_EHT0 0x00
+#define CTL_REG_EHT1 0x01
+#define CTL_REG_EHT2 0x02
+#define CTL_REG_EHT3 0x03
+#define CTL_REG_EHT4 0x04
+#define CTL_REG_EHT5 0x05
+#define CTL_REG_EHT6 0x06
+#define CTL_REG_EHT7 0x07
+#define CTL_REG_EPMM0 0x08
+#define CTL_REG_EPMM1 0x09
+#define CTL_REG_EPMM2 0x0A
+#define CTL_REG_EPMM3 0x0B
+#define CTL_REG_EPMM4 0x0C
+#define CTL_REG_EPMM5 0x0D
+#define CTL_REG_EPMM6 0x0E
+#define CTL_REG_EPMM7 0x0F
+#define CTL_REG_EPMCSL 0x10
+#define CTL_REG_EPMCSH 0x11
+#define CTL_REG_EPMOL 0x14
+#define CTL_REG_EPMOH 0x15
+#define CTL_REG_EWOLIE 0x16
+#define CTL_REG_EWOLIR 0x17
+#define CTL_REG_ERXFCON 0x18
+#define CTL_REG_EPKTCNT 0x19
+
+/*
+ * Control Registers in Bank 2
+ */
+
+#define CTL_REG_MACON1 0x00
+#define CTL_REG_MACON2 0x01
+#define CTL_REG_MACON3 0x02
+#define CTL_REG_MACON4 0x03
+#define CTL_REG_MABBIPG 0x04
+#define CTL_REG_MAIPGL 0x06
+#define CTL_REG_MAIPGH 0x07
+#define CTL_REG_MACLCON1 0x08
+#define CTL_REG_MACLCON2 0x09
+#define CTL_REG_MAMXFLL 0x0A
+#define CTL_REG_MAMXFLH 0x0B
+#define CTL_REG_MAPHSUP 0x0D
+#define CTL_REG_MICON 0x11
+#define CTL_REG_MICMD 0x12
+#define CTL_REG_MIREGADR 0x14
+#define CTL_REG_MIWRL 0x16
+#define CTL_REG_MIWRH 0x17
+#define CTL_REG_MIRDL 0x18
+#define CTL_REG_MIRDH 0x19
+
+/*
+ * Control Registers in Bank 3
+ */
+
+#define CTL_REG_MAADR1 0x00
+#define CTL_REG_MAADR0 0x01
+#define CTL_REG_MAADR3 0x02
+#define CTL_REG_MAADR2 0x03
+#define CTL_REG_MAADR5 0x04
+#define CTL_REG_MAADR4 0x05
+#define CTL_REG_EBSTSD 0x06
+#define CTL_REG_EBSTCON 0x07
+#define CTL_REG_EBSTCSL 0x08
+#define CTL_REG_EBSTCSH 0x09
+#define CTL_REG_MISTAT 0x0A
+#define CTL_REG_EREVID 0x12
+#define CTL_REG_ECOCON 0x15
+#define CTL_REG_EFLOCON 0x17
+#define CTL_REG_EPAUSL 0x18
+#define CTL_REG_EPAUSH 0x19
+
+
+/*
+ * PHY Register
+ */
+
+#define PHY_REG_PHID1 0x02
+#define PHY_REG_PHID2 0x03
+/* taken from the Linux driver */
+#define PHY_REG_PHCON1 0x00
+#define PHY_REG_PHCON2 0x10
+#define PHY_REG_PHLCON 0x14
+
+/*
+ * Receive Filter Register (ERXFCON) bits
+ */
+
+#define ENC_RFR_UCEN 0x80
+#define ENC_RFR_ANDOR 0x40
+#define ENC_RFR_CRCEN 0x20
+#define ENC_RFR_PMEN 0x10
+#define ENC_RFR_MPEN 0x08
+#define ENC_RFR_HTEN 0x04
+#define ENC_RFR_MCEN 0x02
+#define ENC_RFR_BCEN 0x01
+
+/*
+ * ECON1 Register Bits
+ */
+
+#define ENC_ECON1_TXRST 0x80
+#define ENC_ECON1_RXRST 0x40
+#define ENC_ECON1_DMAST 0x20
+#define ENC_ECON1_CSUMEN 0x10
+#define ENC_ECON1_TXRTS 0x08
+#define ENC_ECON1_RXEN 0x04
+#define ENC_ECON1_BSEL1 0x02
+#define ENC_ECON1_BSEL0 0x01
+
+/*
+ * ECON2 Register Bits
+ */
+#define ENC_ECON2_AUTOINC 0x80
+#define ENC_ECON2_PKTDEC 0x40
+#define ENC_ECON2_PWRSV 0x20
+#define ENC_ECON2_VRPS 0x08
+
+/*
+ * EIR Register Bits
+ */
+#define ENC_EIR_PKTIF 0x40
+#define ENC_EIR_DMAIF 0x20
+#define ENC_EIR_LINKIF 0x10
+#define ENC_EIR_TXIF 0x08
+#define ENC_EIR_WOLIF 0x04
+#define ENC_EIR_TXERIF 0x02
+#define ENC_EIR_RXERIF 0x01
+
+/*
+ * ESTAT Register Bits
+ */
+
+#define ENC_ESTAT_INT 0x80
+#define ENC_ESTAT_LATECOL 0x10
+#define ENC_ESTAT_RXBUSY 0x04
+#define ENC_ESTAT_TXABRT 0x02
+#define ENC_ESTAT_CLKRDY 0x01
+
+/*
+ * EIE Register Bits
+ */
+
+#define ENC_EIE_INTIE 0x80
+#define ENC_EIE_PKTIE 0x40
+#define ENC_EIE_DMAIE 0x20
+#define ENC_EIE_LINKIE 0x10
+#define ENC_EIE_TXIE 0x08
+#define ENC_EIE_WOLIE 0x04
+#define ENC_EIE_TXERIE 0x02
+#define ENC_EIE_RXERIE 0x01
+
+/*
+ * MACON1 Register Bits
+ */
+#define ENC_MACON1_LOOPBK 0x10
+#define ENC_MACON1_TXPAUS 0x08
+#define ENC_MACON1_RXPAUS 0x04
+#define ENC_MACON1_PASSALL 0x02
+#define ENC_MACON1_MARXEN 0x01
+
+
+/*
+ * MACON2 Register Bits
+ */
+#define ENC_MACON2_MARST 0x80
+#define ENC_MACON2_RNDRST 0x40
+#define ENC_MACON2_MARXRST 0x08
+#define ENC_MACON2_RFUNRST 0x04
+#define ENC_MACON2_MATXRST 0x02
+#define ENC_MACON2_TFUNRST 0x01
+
+/*
+ * MACON3 Register Bits
+ */
+#define ENC_MACON3_PADCFG2 0x80
+#define ENC_MACON3_PADCFG1 0x40
+#define ENC_MACON3_PADCFG0 0x20
+#define ENC_MACON3_TXCRCEN 0x10
+#define ENC_MACON3_PHDRLEN 0x08
+#define ENC_MACON3_HFRMEN 0x04
+#define ENC_MACON3_FRMLNEN 0x02
+#define ENC_MACON3_FULDPX 0x01
+
+/*
+ * MICMD Register Bits
+ */
+#define ENC_MICMD_MIISCAN 0x02
+#define ENC_MICMD_MIIRD 0x01
+
+/*
+ * MISTAT Register Bits
+ */
+#define ENC_MISTAT_NVALID 0x04
+#define ENC_MISTAT_SCAN 0x02
+#define ENC_MISTAT_BUSY 0x01
+
+/*
+ * PHID1 and PHID2 values
+ */
+#define ENC_PHID1_VALUE 0x0083
+#define ENC_PHID2_VALUE 0x1400
+#define ENC_PHID2_MASK 0xFC00
+
+
+#define ENC_SPI_SLAVE_CS 0x00010000 /* pin P1.16 */
+#define ENC_RESET 0x00020000 /* pin P1.17 */
+
+#define FAILSAFE_VALUE 5000
+
+/*
+ * Controller memory layout:
+ *
+ * 0x0000 - 0x17ff 6k bytes receive buffer
+ * 0x1800 - 0x1fff 2k bytes transmit buffer
+ */
+/* Use the lower memory for receiver buffer. See errata pt. 5 */
+#define ENC_RX_BUF_START 0x0000
+#define ENC_TX_BUF_START 0x1800
+/* taken from the Linux driver */
+#define ENC_RX_BUF_END 0x17ff
+#define ENC_TX_BUF_END 0x1fff
+
+/* maximum frame length */
+#define ENC_MAX_FRM_LEN 1518
+
+#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS)
+#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS)
+#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8);
+
+
+static unsigned char encReadReg (unsigned char regNo);
+static void encWriteReg (unsigned char regNo, unsigned char data);
+static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c);
+static void encReadBuff (unsigned short length, unsigned char *pBuff);
+static void encWriteBuff (unsigned short length, unsigned char *pBuff);
+static void encBitSet (unsigned char regNo, unsigned char data);
+static void encBitClr (unsigned char regNo, unsigned char data);
+static void encReset (void);
+static void encInit (unsigned char *pEthAddr);
+static unsigned short phyRead (unsigned char addr);
+static void phyWrite(unsigned char, unsigned short);
+static void encPoll (void);
+static void encRx (void);
+
+#define m_nic_read(reg) encReadReg(reg)
+#define m_nic_write(reg, data) encWriteReg(reg, data)
+#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count)
+#define m_nic_read_data(len, buf) encReadBuff((len), (buf))
+#define m_nic_write_data(len, buf) encWriteBuff((len), (buf))
+
+/* bit field set */
+#define m_nic_bfs(reg, data) encBitSet(reg, data)
+
+/* bit field clear */
+#define m_nic_bfc(reg, data) encBitClr(reg, data)
+
+static unsigned char bank = 0; /* current bank in enc28j60 */
+static unsigned char next_pointer_lsb;
+static unsigned char next_pointer_msb;
+
+static unsigned char buffer[ENC_MAX_FRM_LEN];
+static int rxResetCounter = 0;
+
+#define RX_RESET_COUNTER 1000;
+
+/*-----------------------------------------------------------------------------
+ * Always returns 0
+ */
+int eth_init (bd_t * bis)
+{
+ unsigned char estatVal;
+
+ /* configure GPIO */
+ (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
+ (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;
+
+ /* CS and RESET active low */
+ PUT32 (IO1SET, ENC_SPI_SLAVE_CS);
+ PUT32 (IO1SET, ENC_RESET);
+
+ spi_init ();
+
+ /* taken from the Linux driver - dangerous stuff here! */
+ /* Wait for CLKRDY to become set (i.e., check that we can communicate with
+ the ENC) */
+ do
+ {
+ estatVal = m_nic_read(CTL_REG_ESTAT);
+ } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY));
+
+ /* initialize controller */
+ encReset ();
+ encInit (bis->bi_enetaddr);
+
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
+
+ return 0;
+}
+
+int eth_send (volatile void *packet, int length)
+{
+ /* check frame length, etc. */
+ /* TODO: */
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ /* set EWRPT */
+ m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
+ m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));
+
+ /* set ETXND */
+ m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
+ m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
+
+ /* set ETXST */
+ m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
+ m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);
+
+ /* write packet */
+ m_nic_write_data (length, (unsigned char *) packet);
+
+ /* taken from the Linux driver */
+ /* Verify that the internal transmit logic has not been altered by excessive
+ collisions. See Errata B4 12 and 14.
+ */
+ if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) {
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ }
+ m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
+
+ /* set ECON1.TXRTS */
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);
+
+ return 0;
+}
+
+
+/*****************************************************************************
+ * This function resets the receiver only. This function may be called from
+ * interrupt-context.
+ */
+static void encReceiverReset (void)
+{
+ unsigned char econ1;
+
+ econ1 = m_nic_read (CTL_REG_ECON1);
+ if ((econ1 & ENC_ECON1_RXRST) == 0) {
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST);
+ rxResetCounter = RX_RESET_COUNTER;
+ }
+}
+
+/*****************************************************************************
+ * receiver reset timer
+ */
+static void encReceiverResetCallback (void)
+{
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
+}
+
+/*-----------------------------------------------------------------------------
+ * Check for received packets. Call NetReceive for each packet. The return
+ * value is ignored by the caller.
+ */
+int eth_rx (void)
+{
+ if (rxResetCounter > 0 && --rxResetCounter == 0) {
+ encReceiverResetCallback ();
+ }
+
+ encPoll ();
+
+ return 0;
+}
+
+void eth_halt (void)
+{
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */
+}
+
+/*****************************************************************************/
+
+static void encPoll (void)
+{
+ unsigned char eir_reg;
+ volatile unsigned char estat_reg;
+ unsigned char pkt_cnt;
+
+#ifdef CONFIG_USE_IRQ
+ /* clear global interrupt enable bit in enc28j60 */
+ m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+ estat_reg = m_nic_read (CTL_REG_ESTAT);
+
+ eir_reg = m_nic_read (CTL_REG_EIR);
+
+ if (eir_reg & ENC_EIR_TXIF) {
+ /* clear TXIF bit in EIR */
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF);
+ }
+
+ /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
+
+ /* move to bank 1 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+ /* read pktcnt */
+ pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+
+ if (pkt_cnt > 0) {
+ if ((eir_reg & ENC_EIR_PKTIF) == 0) {
+ /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */
+ }
+ encRx ();
+ /* clear PKTIF bit in EIR, this should not need to be done but it
+ seems like we get problems if we do not */
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF);
+ }
+
+ if (eir_reg & ENC_EIR_RXERIF) {
+ printf ("encPoll: rx error\n");
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF);
+ }
+ if (eir_reg & ENC_EIR_TXERIF) {
+ printf ("encPoll: tx error\n");
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
+ }
+
+#ifdef CONFIG_USE_IRQ
+ /* set global interrupt enable bit in enc28j60 */
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+}
+
+static void encRx (void)
+{
+ unsigned short pkt_len;
+ unsigned short copy_len;
+ unsigned short status;
+ unsigned char eir_reg;
+ unsigned char pkt_cnt = 0;
+ unsigned short rxbuf_rdpt;
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
+ m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+
+ do {
+ m_nic_read_data (6, buffer);
+ next_pointer_lsb = buffer[0];
+ next_pointer_msb = buffer[1];
+ pkt_len = buffer[2];
+ pkt_len |= (unsigned short) buffer[3] << 8;
+ status = buffer[4];
+ status |= (unsigned short) buffer[5] << 8;
+
+ if (pkt_len <= ENC_MAX_FRM_LEN)
+ copy_len = pkt_len;
+ else
+ copy_len = 0;
+
+ if ((status & (1L << 7)) == 0) /* check Received Ok bit */
+ copy_len = 0;
+
+ /* taken from the Linux driver */
+ /* check if next pointer is resonable */
+ if ((((unsigned int)next_pointer_msb << 8) |
+ (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START)
+ copy_len = 0;
+
+ if (copy_len > 0) {
+ m_nic_read_data (copy_len, buffer);
+ }
+
+ /* advance read pointer to next pointer */
+ m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
+ m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+
+ /* decrease packet counter */
+ m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
+
+ /* taken from the Linux driver */
+ /* Only odd values should be written to ERXRDPTL,
+ * see errata B4 pt.13
+ */
+ rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
+ if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
+ m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
+ (m_nic_read(CTL_REG_ERXNDH) << 8 |
+ m_nic_read(CTL_REG_ERXNDL)))) {
+ m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL));
+ m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH));
+ } else {
+ m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF);
+ m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8);
+ }
+
+ /* move to bank 1 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+ /* read pktcnt */
+ pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1,
+ (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ if (copy_len == 0) {
+ eir_reg = m_nic_read (CTL_REG_EIR);
+ encReceiverReset ();
+ printf ("eth_rx: copy_len=0\n");
+ continue;
+ }
+
+ NetReceive ((unsigned char *) buffer, pkt_len);
+
+ eir_reg = m_nic_read (CTL_REG_EIR);
+ } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
+}
+
+static void encWriteReg (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x40 | regNo); /* write in regNo */
+ spi_write (data);
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (0x1f); /* write reg 0x1f */
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c)
+{
+ unsigned char readback;
+ int i;
+
+ spi_lock ();
+
+ for (i = 0; i < c; i++) {
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x40 | regNo); /* write in regNo */
+ spi_write (data);
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (0x1f); /* write reg 0x1f */
+
+ enc_disable ();
+
+ spi_unlock (); /* we must unlock spi first */
+
+ readback = encReadReg (regNo);
+
+ spi_lock ();
+
+ if (readback == data)
+ break;
+ }
+ spi_unlock ();
+
+ if (i == c) {
+ printf ("enc28j60: write reg %d failed\n", regNo);
+ }
+}
+
+static unsigned char encReadReg (unsigned char regNo)
+{
+ unsigned char rxByte;
+
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x1f); /* read reg 0x1f */
+
+ bank = spi_read () & 0x3;
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (regNo);
+ rxByte = spi_read ();
+
+ /* check if MAC or MII register */
+ if (((bank == 2) && (regNo <= 0x1a)) ||
+ ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) {
+ /* ignore first byte and read another byte */
+ rxByte = spi_read ();
+ }
+
+ enc_disable ();
+ spi_unlock ();
+
+ return rxByte;
+}
+
+static void encReadBuff (unsigned short length, unsigned char *pBuff)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x20 | 0x1a); /* read buffer memory */
+
+ while (length--) {
+ if (pBuff != NULL)
+ *pBuff++ = spi_read ();
+ else
+ spi_write (0);
+ }
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encWriteBuff (unsigned short length, unsigned char *pBuff)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x60 | 0x1a); /* write buffer memory */
+
+ spi_write (0x00); /* control byte */
+
+ while (length--)
+ spi_write (*pBuff++);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encBitSet (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x80 | regNo); /* bit field set */
+ spi_write (data);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encBitClr (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0xA0 | regNo); /* bit field clear */
+ spi_write (data);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encReset (void)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0xff); /* soft reset */
+
+ enc_disable ();
+ spi_unlock ();
+
+ /* sleep 1 ms. See errata pt. 2 */
+ udelay (1000);
+}
+
+static void encInit (unsigned char *pEthAddr)
+{
+ unsigned short phid1 = 0;
+ unsigned short phid2 = 0;
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ /*
+ * Setup the buffer space. The reset values are valid for the
+ * other pointers.
+ */
+ /* We shall not write to ERXST, see errata pt. 5. Instead we
+ have to make sure that ENC_RX_BUS_START is 0. */
+ m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);
+
+ /* taken from the Linux driver */
+ m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1);
+
+ m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);
+
+ next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
+ next_pointer_msb = (ENC_RX_BUF_START >> 8);
+
+ /* verify identification */
+ phid1 = phyRead (PHY_REG_PHID1);
+ phid2 = phyRead (PHY_REG_PHID2);
+
+ if (phid1 != ENC_PHID1_VALUE
+ || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) {
+ printf ("ERROR: failed to identify controller\n");
+ printf ("phid1 = %x, phid2 = %x\n",
+ phid1, (phid2 & ENC_PHID2_MASK));
+ printf ("should be phid1 = %x, phid2 = %x\n",
+ ENC_PHID1_VALUE, ENC_PHID2_VALUE);
+ }
+
+ /*
+ * --- MAC Initialization ---
+ */
+
+ /* Pull MAC out of Reset */
+
+ /* switch to bank 2 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* enable MAC to receive frames */
+ /* added some bits from the Linux driver */
+ m_nic_write_retry (CTL_REG_MACON1
+ ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
+ ,10);
+
+ /* configure pad, tx-crc and duplex */
+ /* added a bit from the Linux driver */
+ m_nic_write_retry (CTL_REG_MACON3
+ ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
+ ,10);
+
+ /* added 4 new lines from the Linux driver */
+ /* Allow infinite deferals if the medium is continously busy */
+ m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10);
+
+ /* Late collisions occur beyond 63 bytes */
+ m_nic_write_retry(CTL_REG_MACLCON2, 63, 10);
+
+ /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
+ m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10);
+
+ /*
+ * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
+ * 0x0c for half-duplex. Nothing for full-duplex
+ */
+ m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10);
+
+ /* set maximum frame length */
+ m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
+ m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10);
+
+ /*
+ * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex
+ * and 0x15 for full duplex.
+ */
+ m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);
+
+ /* set MAC address */
+
+ /* switch to bank 3 */
+ m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1));
+
+ m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1);
+ m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1);
+ m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1);
+ m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1);
+ m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1);
+ m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);
+
+ /*
+ * PHY Initialization taken from the Linux driver
+ */
+
+ /* Prevent automatic loopback of data beeing transmitted by setting
+ ENC_PHCON2_HDLDIS */
+ phyWrite(PHY_REG_PHCON2, (1<<8));
+
+ /* LEDs configuration
+ * LEDA: LACFG = 0100 -> display link status
+ * LEDB: LBCFG = 0111 -> display TX & RX activity
+ * STRCH = 1 -> LED pulses
+ */
+ phyWrite(PHY_REG_PHLCON, 0x0472);
+
+ /* Reset PDPXMD-bit => half duplex */
+ phyWrite(PHY_REG_PHCON1, 0);
+
+ /*
+ * Receive settings
+ */
+
+#ifdef CONFIG_USE_IRQ
+ /* enable interrupts */
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+}
+
+/*****************************************************************************
+ *
+ * Description:
+ * Read PHY registers.
+ *
+ * NOTE! This function will change to Bank 2.
+ *
+ * Params:
+ * [in] addr address of the register to read
+ *
+ * Returns:
+ * The value in the register
+ */
+static unsigned short phyRead (unsigned char addr)
+{
+ unsigned short ret = 0;
+
+ /* move to bank 2 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* write address to MIREGADR */
+ m_nic_write (CTL_REG_MIREGADR, addr);
+
+ /* set MICMD.MIIRD */
+ m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);
+
+ /* taken from the Linux driver */
+ /* move to bank 3 */
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* poll MISTAT.BUSY bit until operation is complete */
+ while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
+ static int cnt = 0;
+
+ if (cnt++ >= 1000) {
+ /* GJ - this seems extremely dangerous! */
+ /* printf("#"); */
+ cnt = 0;
+ }
+ }
+
+ /* taken from the Linux driver */
+ /* move to bank 2 */
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* clear MICMD.MIIRD */
+ m_nic_write (CTL_REG_MICMD, 0);
+
+ ret = (m_nic_read (CTL_REG_MIRDH) << 8);
+ ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF);
+
+ return ret;
+}
+
+/*****************************************************************************
+ *
+ * Taken from the Linux driver.
+ * Description:
+ * Write PHY registers.
+ *
+ * NOTE! This function will change to Bank 3.
+ *
+ * Params:
+ * [in] addr address of the register to write to
+ * [in] data to be written
+ *
+ * Returns:
+ * None
+ */
+static void phyWrite(unsigned char addr, unsigned short data)
+{
+ /* move to bank 2 */
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* write address to MIREGADR */
+ m_nic_write(CTL_REG_MIREGADR, addr);
+
+ m_nic_write(CTL_REG_MIWRL, data & 0xff);
+ m_nic_write(CTL_REG_MIWRH, data >> 8);
+
+ /* move to bank 3 */
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* poll MISTAT.BUSY bit until operation is complete */
+ while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
+ static int cnt = 0;
+
+ if(cnt++ >= 1000) {
+ cnt = 0;
+ }
+ }
+}
+
+#endif /* CONFIG_ENC28J60 */
diff --git a/drivers/net/inca-ip_sw.c b/drivers/net/inca-ip_sw.c
new file mode 100644
index 0000000..e4aaed6
--- /dev/null
+++ b/drivers/net/inca-ip_sw.c
@@ -0,0 +1,817 @@
+/*
+ * INCA-IP internal switch ethernet driver.
+ *
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+
+#if defined(CONFIG_CMD_NET) \
+ && defined(CONFIG_NET_MULTI) && defined(CONFIG_INCA_IP_SWITCH)
+
+#include <malloc.h>
+#include <net.h>
+#include <asm/inca-ip.h>
+#include <asm/addrspace.h>
+
+
+#define NUM_RX_DESC PKTBUFSRX
+#define NUM_TX_DESC 3
+#define TOUT_LOOP 1000000
+
+
+#define DELAY udelay(10000)
+ /* Sometimes the store word instruction hangs while writing to one
+ * of the Switch registers. Moving the instruction into a separate
+ * function somehow makes the problem go away.
+ */
+static void SWORD(volatile u32 * reg, u32 value)
+{
+ *reg = value;
+}
+
+#define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value;
+#define DMA_READ_REG(reg, value) value = (u32)*((volatile u32*)reg)
+#define SW_WRITE_REG(reg, value) \
+ SWORD(reg, value);\
+ DELAY;\
+ SWORD(reg, value);
+
+#define SW_READ_REG(reg, value) \
+ value = (u32)*((volatile u32*)reg);\
+ DELAY;\
+ value = (u32)*((volatile u32*)reg);
+
+#define INCA_DMA_TX_POLLING_TIME 0x07
+#define INCA_DMA_RX_POLLING_TIME 0x07
+
+#define INCA_DMA_TX_HOLD 0x80000000
+#define INCA_DMA_TX_EOP 0x40000000
+#define INCA_DMA_TX_SOP 0x20000000
+#define INCA_DMA_TX_ICPT 0x10000000
+#define INCA_DMA_TX_IEOP 0x08000000
+
+#define INCA_DMA_RX_C 0x80000000
+#define INCA_DMA_RX_SOP 0x40000000
+#define INCA_DMA_RX_EOP 0x20000000
+
+#define INCA_SWITCH_PHY_SPEED_10H 0x1
+#define INCA_SWITCH_PHY_SPEED_10F 0x5
+#define INCA_SWITCH_PHY_SPEED_100H 0x2
+#define INCA_SWITCH_PHY_SPEED_100F 0x6
+
+/************************ Auto MDIX settings ************************/
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR INCA_IP_Ports_P1_DIR
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL INCA_IP_Ports_P1_ALTSEL
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT INCA_IP_Ports_P1_OUT
+#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX 16
+
+#define WAIT_SIGNAL_RETRIES 100
+#define WAIT_LINK_RETRIES 100
+#define LINK_RETRY_DELAY 2000 /* ms */
+/********************************************************************/
+
+typedef struct
+{
+ union {
+ struct {
+ volatile u32 HOLD :1;
+ volatile u32 ICpt :1;
+ volatile u32 IEop :1;
+ volatile u32 offset :3;
+ volatile u32 reserved0 :4;
+ volatile u32 NFB :22;
+ }field;
+
+ volatile u32 word;
+ }params;
+
+ volatile u32 nextRxDescPtr;
+
+ volatile u32 RxDataPtr;
+
+ union {
+ struct {
+ volatile u32 C :1;
+ volatile u32 Sop :1;
+ volatile u32 Eop :1;
+ volatile u32 reserved3 :12;
+ volatile u32 NBT :17;
+ }field;
+
+ volatile u32 word;
+ }status;
+
+} inca_rx_descriptor_t;
+
+
+typedef struct
+{
+ union {
+ struct {
+ volatile u32 HOLD :1;
+ volatile u32 Eop :1;
+ volatile u32 Sop :1;
+ volatile u32 ICpt :1;
+ volatile u32 IEop :1;
+ volatile u32 reserved0 :5;
+ volatile u32 NBA :22;
+ }field;
+
+ volatile u32 word;
+ }params;
+
+ volatile u32 nextTxDescPtr;
+
+ volatile u32 TxDataPtr;
+
+ volatile u32 C :1;
+ volatile u32 reserved3 :31;
+
+} inca_tx_descriptor_t;
+
+
+static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16)));
+static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16)));
+
+static int tx_new, rx_new, tx_hold, rx_hold;
+static int tx_old_hold = -1;
+static int initialized = 0;
+
+
+static int inca_switch_init(struct eth_device *dev, bd_t * bis);
+static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length);
+static int inca_switch_recv(struct eth_device *dev);
+static void inca_switch_halt(struct eth_device *dev);
+static void inca_init_switch_chip(void);
+static void inca_dma_init(void);
+static int inca_amdix(void);
+
+
+int inca_switch_initialize(bd_t * bis)
+{
+ struct eth_device *dev;
+
+#if 0
+ printf("Entered inca_switch_initialize()\n");
+#endif
+
+ if (!(dev = (struct eth_device *) malloc (sizeof *dev))) {
+ printf("Failed to allocate memory\n");
+ return 0;
+ }
+ memset(dev, 0, sizeof(*dev));
+
+ inca_dma_init();
+
+ inca_init_switch_chip();
+
+#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
+ inca_amdix();
+#endif
+
+ sprintf(dev->name, "INCA-IP Switch");
+ dev->init = inca_switch_init;
+ dev->halt = inca_switch_halt;
+ dev->send = inca_switch_send;
+ dev->recv = inca_switch_recv;
+
+ eth_register(dev);
+
+#if 0
+ printf("Leaving inca_switch_initialize()\n");
+#endif
+
+ return 1;
+}
+
+
+static int inca_switch_init(struct eth_device *dev, bd_t * bis)
+{
+ int i;
+ u32 v, regValue;
+ u16 wTmp;
+
+#if 0
+ printf("Entering inca_switch_init()\n");
+#endif
+
+ /* Set MAC address.
+ */
+ wTmp = (u16)dev->enetaddr[0];
+ regValue = (wTmp << 8) | dev->enetaddr[1];
+
+ SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue);
+
+ wTmp = (u16)dev->enetaddr[2];
+ regValue = (wTmp << 8) | dev->enetaddr[3];
+ regValue = regValue << 16;
+ wTmp = (u16)dev->enetaddr[4];
+ regValue |= (wTmp<<8) | dev->enetaddr[5];
+
+ SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue);
+
+ /* Initialize the descriptor rings.
+ */
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ inca_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_ring[i]);
+ memset(rx_desc, 0, sizeof(rx_ring[i]));
+
+ /* Set maximum size of receive buffer.
+ */
+ rx_desc->params.field.NFB = PKTSIZE_ALIGN;
+
+ /* Set the offset of the receive buffer. Zero means
+ * that the offset mechanism is not used.
+ */
+ rx_desc->params.field.offset = 0;
+
+ /* Check if it is the last descriptor.
+ */
+ if (i == (NUM_RX_DESC - 1)) {
+ /* Let the last descriptor point to the first
+ * one.
+ */
+ rx_desc->nextRxDescPtr = KSEG1ADDR((u32)rx_ring);
+ } else {
+ /* Set the address of the next descriptor.
+ */
+ rx_desc->nextRxDescPtr = (u32)KSEG1ADDR(&rx_ring[i+1]);
+ }
+
+ rx_desc->RxDataPtr = (u32)KSEG1ADDR(NetRxPackets[i]);
+ }
+
+#if 0
+ printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]);
+ printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]);
+#endif
+
+ for (i = 0; i < NUM_TX_DESC; i++) {
+ inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[i]);
+
+ memset(tx_desc, 0, sizeof(tx_ring[i]));
+
+ tx_desc->params.word = 0;
+ tx_desc->params.field.HOLD = 1;
+ tx_desc->C = 1;
+
+ /* Check if it is the last descriptor.
+ */
+ if (i == (NUM_TX_DESC - 1)) {
+ /* Let the last descriptor point to the
+ * first one.
+ */
+ tx_desc->nextTxDescPtr = KSEG1ADDR((u32)tx_ring);
+ } else {
+ /* Set the address of the next descriptor.
+ */
+ tx_desc->nextTxDescPtr = (u32)KSEG1ADDR(&tx_ring[i+1]);
+ }
+ }
+
+ /* Initialize RxDMA.
+ */
+ DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v);
+#if 0
+ printf("RX status = 0x%08X\n", v);
+#endif
+
+ /* Writing to the FRDA of CHANNEL.
+ */
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring);
+
+ /* Writing to the COMMAND REG.
+ */
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT);
+
+ /* Initialize TxDMA.
+ */
+ DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v);
+#if 0
+ printf("TX status = 0x%08X\n", v);
+#endif
+
+ /* Writing to the FRDA of CHANNEL.
+ */
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring);
+
+ tx_new = rx_new = 0;
+
+ tx_hold = NUM_TX_DESC - 1;
+ rx_hold = NUM_RX_DESC - 1;
+
+#if 0
+ rx_ring[rx_hold].params.field.HOLD = 1;
+#endif
+ /* enable spanning tree forwarding, enable the CPU port */
+ /* ST_PT:
+ * CPS (CPU port status) 0x3 (forwarding)
+ * LPS (LAN port status) 0x3 (forwarding)
+ * PPS (PC port status) 0x3 (forwarding)
+ */
+ SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f);
+
+#if 0
+ printf("Leaving inca_switch_init()\n");
+#endif
+
+ return 0;
+}
+
+
+static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length)
+{
+ int i;
+ int res = -1;
+ u32 command;
+ u32 regValue;
+ inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[tx_new]);
+
+#if 0
+ printf("Entered inca_switch_send()\n");
+#endif
+
+ if (length <= 0) {
+ printf ("%s: bad packet size: %d\n", dev->name, length);
+ goto Done;
+ }
+
+ for(i = 0; tx_desc->C == 0; i++) {
+ if (i >= TOUT_LOOP) {
+ printf("%s: tx error buffer not ready\n", dev->name);
+ goto Done;
+ }
+ }
+
+ if (tx_old_hold >= 0) {
+ KSEG1ADDR(&tx_ring[tx_old_hold])->params.field.HOLD = 1;
+ }
+ tx_old_hold = tx_hold;
+
+ tx_desc->params.word =
+ (INCA_DMA_TX_SOP | INCA_DMA_TX_EOP | INCA_DMA_TX_HOLD);
+
+ tx_desc->C = 0;
+ tx_desc->TxDataPtr = (u32)packet;
+ tx_desc->params.field.NBA = length;
+
+ KSEG1ADDR(&tx_ring[tx_hold])->params.field.HOLD = 0;
+
+ tx_hold = tx_new;
+ tx_new = (tx_new + 1) % NUM_TX_DESC;
+
+
+ if (! initialized) {
+ command = INCA_IP_DMA_DMA_TXCCR0_INIT;
+ initialized = 1;
+ } else {
+ command = INCA_IP_DMA_DMA_TXCCR0_HR;
+ }
+
+ DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
+ regValue |= command;
+#if 0
+ printf("regValue = 0x%x\n", regValue);
+#endif
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
+
+#if 1
+ for(i = 0; KSEG1ADDR(&tx_ring[tx_hold])->C == 0; i++) {
+ if (i >= TOUT_LOOP) {
+ printf("%s: tx buffer not ready\n", dev->name);
+ goto Done;
+ }
+ }
+#endif
+ res = length;
+Done:
+#if 0
+ printf("Leaving inca_switch_send()\n");
+#endif
+ return res;
+}
+
+
+static int inca_switch_recv(struct eth_device *dev)
+{
+ int length = 0;
+ inca_rx_descriptor_t * rx_desc;
+
+#if 0
+ printf("Entered inca_switch_recv()\n");
+#endif
+
+ for (;;) {
+ rx_desc = KSEG1ADDR(&rx_ring[rx_new]);
+
+ if (rx_desc->status.field.C == 0) {
+ break;
+ }
+
+#if 0
+ rx_ring[rx_new].params.field.HOLD = 1;
+#endif
+
+ if (! rx_desc->status.field.Eop) {
+ printf("Partly received packet!!!\n");
+ break;
+ }
+
+ length = rx_desc->status.field.NBT;
+ rx_desc->status.word &=
+ ~(INCA_DMA_RX_EOP | INCA_DMA_RX_SOP | INCA_DMA_RX_C);
+#if 0
+{
+ int i;
+ for (i=0;i<length - 4;i++) {
+ if (i % 16 == 0) printf("\n%04x: ", i);
+ printf("%02X ", NetRxPackets[rx_new][i]);
+ }
+ printf("\n");
+}
+#endif
+
+ if (length) {
+#if 0
+ printf("Received %d bytes\n", length);
+#endif
+ NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_new]), length - 4);
+ } else {
+#if 1
+ printf("Zero length!!!\n");
+#endif
+ }
+
+
+ KSEG1ADDR(&rx_ring[rx_hold])->params.field.HOLD = 0;
+
+ rx_hold = rx_new;
+
+ rx_new = (rx_new + 1) % NUM_RX_DESC;
+ }
+
+#if 0
+ printf("Leaving inca_switch_recv()\n");
+#endif
+
+ return length;
+}
+
+
+static void inca_switch_halt(struct eth_device *dev)
+{
+#if 0
+ printf("Entered inca_switch_halt()\n");
+#endif
+
+#if 1
+ initialized = 0;
+#endif
+#if 1
+ /* Disable forwarding to the CPU port.
+ */
+ SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
+
+ /* Close RxDMA channel.
+ */
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
+
+ /* Close TxDMA channel.
+ */
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF);
+
+
+#endif
+#if 0
+ printf("Leaving inca_switch_halt()\n");
+#endif
+}
+
+
+static void inca_init_switch_chip(void)
+{
+ u32 regValue;
+
+ /* To workaround a problem with collision counter
+ * (see Errata sheet).
+ */
+ SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001);
+ SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001);
+
+#if 1
+ /* init MDIO configuration:
+ * MDS (Poll speed): 0x01 (4ms)
+ * PHY_LAN_ADDR: 0x06
+ * PHY_PC_ADDR: 0x05
+ * UEP (Use External PHY): 0x00 (Internal PHY is used)
+ * PS (Port Select): 0x00 (PT/UMM for LAN)
+ * PT (PHY Test): 0x00 (no test mode)
+ * UMM (Use MDIO Mode): 0x00 (state machine is disabled)
+ */
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50);
+
+ /* init PHY:
+ * SL (Auto Neg. Speed for LAN)
+ * SP (Auto Neg. Speed for PC)
+ * LL (Link Status for LAN)
+ * LP (Link Status for PC)
+ * DL (Duplex Status for LAN)
+ * DP (Duplex Status for PC)
+ * PL (Auto Neg. Pause Status for LAN)
+ * PP (Auto Neg. Pause Status for PC)
+ */
+ SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff);
+
+ /* MDIO_ACC:
+ * RA (Request/Ack) 0x01 (Request)
+ * RW (Read/Write) 0x01 (Write)
+ * PHY_ADDR 0x05 (PC)
+ * REG_ADDR 0x00 (PHY_BCR: basic control register)
+ * PHY_DATA 0x8000
+ * Reset - software reset
+ * LB (loop back) - normal
+ * SS (speed select) - 10 Mbit/s
+ * ANE (auto neg. enable) - enable
+ * PD (power down) - normal
+ * ISO (isolate) - normal
+ * RAN (restart auto neg.) - normal
+ * DM (duplex mode) - half duplex
+ * CT (collision test) - enable
+ */
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000);
+
+ /* MDIO_ACC:
+ * RA (Request/Ack) 0x01 (Request)
+ * RW (Read/Write) 0x01 (Write)
+ * PHY_ADDR 0x06 (LAN)
+ * REG_ADDR 0x00 (PHY_BCR: basic control register)
+ * PHY_DATA 0x8000
+ * Reset - software reset
+ * LB (loop back) - normal
+ * SS (speed select) - 10 Mbit/s
+ * ANE (auto neg. enable) - enable
+ * PD (power down) - normal
+ * ISO (isolate) - normal
+ * RAN (restart auto neg.) - normal
+ * DM (duplex mode) - half duplex
+ * CT (collision test) - enable
+ */
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000);
+
+#endif
+
+ /* Make sure the CPU port is disabled for now. We
+ * don't want packets to get stacked for us until
+ * we enable DMA and are prepared to receive them.
+ */
+ SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
+
+ SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue);
+
+ /* CRC GEN is enabled.
+ */
+ regValue |= 0x00000200;
+ SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue);
+
+ /* ADD TAG is disabled.
+ */
+ SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
+ regValue &= ~0x00000002;
+ SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
+}
+
+
+static void inca_dma_init(void)
+{
+ /* Switch off all DMA channels.
+ */
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF);
+
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF);
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF);
+
+ /* Setup TX channel polling time.
+ */
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME);
+
+ /* Setup RX channel polling time.
+ */
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME);
+
+ /* ERRATA: write reset value into the DMA RX IMR register.
+ */
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF);
+
+ /* Just in case: disable all transmit interrupts also.
+ */
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF);
+
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF);
+ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF);
+}
+
+#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
+static int inca_amdix(void)
+{
+ u32 phyReg1 = 0;
+ u32 phyReg4 = 0;
+ u32 phyReg5 = 0;
+ u32 phyReg6 = 0;
+ u32 phyReg31 = 0;
+ u32 regEphy = 0;
+ int mdi_flag;
+ int retries;
+
+ /* Setup GPIO pins.
+ */
+ *INCA_IP_AUTO_MDIX_LAN_PORTS_DIR |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+ *INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+
+#if 0
+ /* Wait for signal.
+ */
+ retries = WAIT_SIGNAL_RETRIES;
+ while (--retries) {
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+ (0x1 << 31) | /* RA */
+ (0x0 << 30) | /* Read */
+ (0x6 << 21) | /* LAN */
+ (17 << 16)); /* PHY_MCSR */
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
+ } while (phyReg1 & (1 << 31));
+
+ if (phyReg1 & (1 << 1)) {
+ /* Signal detected */
+ break;
+ }
+ }
+
+ if (!retries)
+ goto Fail;
+#endif
+
+ /* Set MDI mode.
+ */
+ *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+ mdi_flag = 1;
+
+ /* Wait for link.
+ */
+ retries = WAIT_LINK_RETRIES;
+ while (--retries) {
+ udelay(LINK_RETRY_DELAY * 1000);
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+ (0x1 << 31) | /* RA */
+ (0x0 << 30) | /* Read */
+ (0x6 << 21) | /* LAN */
+ (1 << 16)); /* PHY_BSR */
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
+ } while (phyReg1 & (1 << 31));
+
+ if (phyReg1 & (1 << 2)) {
+ /* Link is up */
+ break;
+ } else if (mdi_flag) {
+ /* Set MDIX mode */
+ *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+ mdi_flag = 0;
+ } else {
+ /* Set MDI mode */
+ *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+ mdi_flag = 1;
+ }
+ }
+
+ if (!retries) {
+ goto Fail;
+ } else {
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+ (0x1 << 31) | /* RA */
+ (0x0 << 30) | /* Read */
+ (0x6 << 21) | /* LAN */
+ (1 << 16)); /* PHY_BSR */
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
+ } while (phyReg1 & (1 << 31));
+
+ /* Auto-negotiation / Parallel detection complete
+ */
+ if (phyReg1 & (1 << 5)) {
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+ (0x1 << 31) | /* RA */
+ (0x0 << 30) | /* Read */
+ (0x6 << 21) | /* LAN */
+ (31 << 16)); /* PHY_SCSR */
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31);
+ } while (phyReg31 & (1 << 31));
+
+ switch ((phyReg31 >> 2) & 0x7) {
+ case INCA_SWITCH_PHY_SPEED_10H:
+ /* 10Base-T Half-duplex */
+ regEphy = 0;
+ break;
+ case INCA_SWITCH_PHY_SPEED_10F:
+ /* 10Base-T Full-duplex */
+ regEphy = INCA_IP_Switch_EPHY_DL;
+ break;
+ case INCA_SWITCH_PHY_SPEED_100H:
+ /* 100Base-TX Half-duplex */
+ regEphy = INCA_IP_Switch_EPHY_SL;
+ break;
+ case INCA_SWITCH_PHY_SPEED_100F:
+ /* 100Base-TX Full-duplex */
+ regEphy = INCA_IP_Switch_EPHY_SL | INCA_IP_Switch_EPHY_DL;
+ break;
+ }
+
+ /* In case of Auto-negotiation,
+ * update the negotiated PAUSE support status
+ */
+ if (phyReg1 & (1 << 3)) {
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+ (0x1 << 31) | /* RA */
+ (0x0 << 30) | /* Read */
+ (0x6 << 21) | /* LAN */
+ (6 << 16)); /* PHY_ANER */
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
+ } while (phyReg6 & (1 << 31));
+
+ /* We are Autoneg-able.
+ * Is Link partner also able to autoneg?
+ */
+ if (phyReg6 & (1 << 0)) {
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+ (0x1 << 31) | /* RA */
+ (0x0 << 30) | /* Read */
+ (0x6 << 21) | /* LAN */
+ (4 << 16)); /* PHY_ANAR */
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
+ } while (phyReg4 & (1 << 31));
+
+ /* We advertise PAUSE capab.
+ * Does link partner also advertise it?
+ */
+ if (phyReg4 & (1 << 10)) {
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+ (0x1 << 31) | /* RA */
+ (0x0 << 30) | /* Read */
+ (0x6 << 21) | /* LAN */
+ (5 << 16)); /* PHY_ANLPAR */
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
+ } while (phyReg5 & (1 << 31));
+
+ /* Link partner is PAUSE capab.
+ */
+ if (phyReg5 & (1 << 10)) {
+ regEphy |= INCA_IP_Switch_EPHY_PL;
+ }
+ }
+ }
+
+ }
+
+ /* Link is up */
+ regEphy |= INCA_IP_Switch_EPHY_LL;
+
+ SW_WRITE_REG(INCA_IP_Switch_EPHY, regEphy);
+ }
+ }
+
+ return 0;
+
+Fail:
+ printf("No Link on LAN port\n");
+ return -1;
+}
+#endif /* CONFIG_INCA_IP_SWITCH_AMDIX */
+
+#endif
diff --git a/drivers/net/ks8695eth.c b/drivers/net/ks8695eth.c
new file mode 100644
index 0000000..b598dd7
--- /dev/null
+++ b/drivers/net/ks8695eth.c
@@ -0,0 +1,238 @@
+/*
+ * ks8695eth.c -- KS8695 ethernet driver
+ *
+ * (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/****************************************************************************/
+
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_KS8695ETH
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <asm/arch/platform.h>
+
+/****************************************************************************/
+
+/*
+ * Hardware register access to the KS8695 LAN ethernet port
+ * (well, it is the 4 port switch really).
+ */
+#define ks8695_read(a) *((volatile unsigned long *) (KS8695_IO_BASE + (a)))
+#define ks8695_write(a,v) *((volatile unsigned long *) (KS8695_IO_BASE + (a))) = (v)
+
+/****************************************************************************/
+
+/*
+ * Define the descriptor in-memory data structures.
+ */
+struct ks8695_txdesc {
+ uint32_t owner;
+ uint32_t ctrl;
+ uint32_t addr;
+ uint32_t next;
+};
+
+struct ks8695_rxdesc {
+ uint32_t status;
+ uint32_t ctrl;
+ uint32_t addr;
+ uint32_t next;
+};
+
+/****************************************************************************/
+
+/*
+ * Allocate local data structures to use for receiving and sending
+ * packets. Just to keep it all nice and simple.
+ */
+
+#define TXDESCS 4
+#define RXDESCS 4
+#define BUFSIZE 2048
+
+volatile struct ks8695_txdesc ks8695_tx[TXDESCS] __attribute__((aligned(256)));
+volatile struct ks8695_rxdesc ks8695_rx[RXDESCS] __attribute__((aligned(256)));
+volatile uint8_t ks8695_bufs[BUFSIZE*(TXDESCS+RXDESCS)] __attribute__((aligned(2048)));;
+
+/****************************************************************************/
+
+/*
+ * Ideally we want to use the MAC address stored in flash.
+ * But we do some sanity checks in case they are not present
+ * first.
+ */
+unsigned char eth_mac[] = {
+ 0x00, 0x13, 0xc6, 0x00, 0x00, 0x00
+};
+
+void ks8695_getmac(void)
+{
+ unsigned char *fp;
+ int i;
+
+ /* Check if flash MAC is valid */
+ fp = (unsigned char *) 0x0201c000;
+ for (i = 0; (i < 6); i++) {
+ if ((fp[i] != 0) && (fp[i] != 0xff))
+ break;
+ }
+
+ /* If we found a valid looking MAC address then use it */
+ if (i < 6)
+ memcpy(&eth_mac[0], fp, 6);
+}
+
+/****************************************************************************/
+
+void eth_reset(bd_t *bd)
+{
+ int i;
+
+ debug ("%s(%d): eth_reset()\n", __FILE__, __LINE__);
+
+ /* Reset the ethernet engines first */
+ ks8695_write(KS8695_LAN_DMA_TX, 0x80000000);
+ ks8695_write(KS8695_LAN_DMA_RX, 0x80000000);
+
+ ks8695_getmac();
+
+ /* Set MAC address */
+ ks8695_write(KS8695_LAN_MAC_LOW, (eth_mac[5] | (eth_mac[4] << 8) |
+ (eth_mac[3] << 16) | (eth_mac[2] << 24)));
+ ks8695_write(KS8695_LAN_MAC_HIGH, (eth_mac[1] | (eth_mac[0] << 8)));
+
+ /* Turn the 4 port switch on */
+ i = ks8695_read(KS8695_SWITCH_CTRL0);
+ ks8695_write(KS8695_SWITCH_CTRL0, (i | 0x1));
+ /* ks8695_write(KS8695_WAN_CONTROL, 0x3f000066); */
+
+ /* Initialize descriptor rings */
+ for (i = 0; (i < TXDESCS); i++) {
+ ks8695_tx[i].owner = 0;
+ ks8695_tx[i].ctrl = 0;
+ ks8695_tx[i].addr = (uint32_t) &ks8695_bufs[i*BUFSIZE];
+ ks8695_tx[i].next = (uint32_t) &ks8695_tx[i+1];
+ }
+ ks8695_tx[TXDESCS-1].ctrl = 0x02000000;
+ ks8695_tx[TXDESCS-1].next = (uint32_t) &ks8695_tx[0];
+
+ for (i = 0; (i < RXDESCS); i++) {
+ ks8695_rx[i].status = 0x80000000;
+ ks8695_rx[i].ctrl = BUFSIZE - 4;
+ ks8695_rx[i].addr = (uint32_t) &ks8695_bufs[(i+TXDESCS)*BUFSIZE];
+ ks8695_rx[i].next = (uint32_t) &ks8695_rx[i+1];
+ }
+ ks8695_rx[RXDESCS-1].ctrl |= 0x00080000;
+ ks8695_rx[RXDESCS-1].next = (uint32_t) &ks8695_rx[0];
+
+ /* The KS8695 is pretty slow reseting the ethernets... */
+ udelay(2000000);
+
+ /* Enable the ethernet engine */
+ ks8695_write(KS8695_LAN_TX_LIST, (uint32_t) &ks8695_tx[0]);
+ ks8695_write(KS8695_LAN_RX_LIST, (uint32_t) &ks8695_rx[0]);
+ ks8695_write(KS8695_LAN_DMA_TX, 0x3);
+ ks8695_write(KS8695_LAN_DMA_RX, 0x71);
+ ks8695_write(KS8695_LAN_DMA_RX_START, 0x1);
+
+ printf("KS8695 ETHERNET: ");
+ for (i = 0; (i < 5); i++) {
+ bd->bi_enetaddr[i] = eth_mac[i];
+ printf("%02x:", eth_mac[i]);
+ }
+ bd->bi_enetaddr[i] = eth_mac[i];
+ printf("%02x\n", eth_mac[i]);
+}
+
+/****************************************************************************/
+
+int eth_init(bd_t *bd)
+{
+ debug ("%s(%d): eth_init()\n", __FILE__, __LINE__);
+
+ eth_reset(bd);
+ return 0;
+}
+
+/****************************************************************************/
+
+void eth_halt(void)
+{
+ debug ("%s(%d): eth_halt()\n", __FILE__, __LINE__);
+
+ /* Reset the ethernet engines */
+ ks8695_write(KS8695_LAN_DMA_TX, 0x80000000);
+ ks8695_write(KS8695_LAN_DMA_RX, 0x80000000);
+}
+
+/****************************************************************************/
+
+int eth_rx(void)
+{
+ volatile struct ks8695_rxdesc *dp;
+ int i, len = 0;
+
+ debug ("%s(%d): eth_rx()\n", __FILE__, __LINE__);
+
+ for (i = 0; (i < RXDESCS); i++) {
+ dp= &ks8695_rx[i];
+ if ((dp->status & 0x80000000) == 0) {
+ len = (dp->status & 0x7ff) - 4;
+ NetReceive((void *) dp->addr, len);
+ dp->status = 0x80000000;
+ ks8695_write(KS8695_LAN_DMA_RX_START, 0x1);
+ break;
+ }
+ }
+
+ return len;
+}
+
+/****************************************************************************/
+
+int eth_send(volatile void *packet, int len)
+{
+ volatile struct ks8695_txdesc *dp;
+ static int next = 0;
+
+ debug ("%s(%d): eth_send(packet=%x,len=%d)\n", __FILE__, __LINE__,
+ packet, len);
+
+ dp = &ks8695_tx[next];
+ memcpy((void *) dp->addr, (void *) packet, len);
+
+ if (len < 64) {
+ memset((void *) (dp->addr + len), 0, 64-len);
+ len = 64;
+ }
+
+ dp->ctrl = len | 0xe0000000;
+ dp->owner = 0x80000000;
+
+ ks8695_write(KS8695_LAN_DMA_TX, 0x3);
+ ks8695_write(KS8695_LAN_DMA_TX_START, 0x1);
+
+ if (++next >= TXDESCS)
+ next = 0;
+
+ return len;
+}
+
+#endif /* CONFIG_DRIVER_KS8695ETH */
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
new file mode 100644
index 0000000..ecdcbd9
--- /dev/null
+++ b/drivers/net/lan91c96.c
@@ -0,0 +1,967 @@
+/*------------------------------------------------------------------------
+ * lan91c96.c
+ * This is a driver for SMSC's LAN91C96 single-chip Ethernet device, based
+ * on the SMC91111 driver from U-boot.
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Rolf Offermanns <rof@sysgo.de>
+ *
+ * Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
+ * Developed by Simple Network Magic Corporation (SNMC)
+ * Copyright (C) 1996 by Erik Stahlman (ES)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Information contained in this file was obtained from the LAN91C96
+ * manual from SMC. To get a copy, if you really want one, you can find
+ * information under www.smsc.com.
+ *
+ *
+ * "Features" of the SMC chip:
+ * 6144 byte packet memory. ( for the 91C96 )
+ * EEPROM for configuration
+ * AUI/TP selection ( mine has 10Base2/10BaseT select )
+ *
+ * Arguments:
+ * io = for the base address
+ * irq = for the IRQ
+ *
+ * author:
+ * Erik Stahlman ( erik@vt.edu )
+ * Daris A Nevil ( dnevil@snmc.com )
+ *
+ *
+ * Hardware multicast code from Peter Cammaert ( pc@denkart.be )
+ *
+ * Sources:
+ * o SMSC LAN91C96 databook (www.smsc.com)
+ * o smc91111.c (u-boot driver)
+ * o smc9194.c (linux kernel driver)
+ * o lan91c96.c (Intel Diagnostic Manager driver)
+ *
+ * History:
+ * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
+ * for lan91c96
+ *---------------------------------------------------------------------------
+ */
+
+#include <common.h>
+#include <command.h>
+#include "lan91c96.h"
+#include <net.h>
+
+#ifdef CONFIG_DRIVER_LAN91C96
+
+#if defined(CONFIG_CMD_NET)
+
+/*------------------------------------------------------------------------
+ *
+ * Configuration options, for the experienced user to change.
+ *
+ -------------------------------------------------------------------------*/
+
+/* Use power-down feature of the chip */
+#define POWER_DOWN 0
+
+/*
+ * Wait time for memory to be free. This probably shouldn't be
+ * tuned that much, as waiting for this means nothing else happens
+ * in the system
+*/
+#define MEMORY_WAIT_TIME 16
+
+#define SMC_DEBUG 0
+
+#if (SMC_DEBUG > 2 )
+#define PRINTK3(args...) printf(args)
+#else
+#define PRINTK3(args...)
+#endif
+
+#if SMC_DEBUG > 1
+#define PRINTK2(args...) printf(args)
+#else
+#define PRINTK2(args...)
+#endif
+
+#ifdef SMC_DEBUG
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+
+/*------------------------------------------------------------------------
+ *
+ * The internal workings of the driver. If you are changing anything
+ * here with the SMC stuff, you should have the datasheet and know
+ * what you are doing.
+ *
+ *------------------------------------------------------------------------
+ */
+#define CARDNAME "LAN91C96"
+
+#define SMC_BASE_ADDRESS CONFIG_LAN91C96_BASE
+
+#define SMC_DEV_NAME "LAN91C96"
+#define SMC_ALLOC_MAX_TRY 5
+#define SMC_TX_TIMEOUT 30
+
+#define ETH_ZLEN 60
+
+#ifdef CONFIG_LAN91C96_USE_32_BIT
+#define USE_32_BIT 1
+#else
+#undef USE_32_BIT
+#endif
+
+/*-----------------------------------------------------------------
+ *
+ * The driver can be entered at any of the following entry points.
+ *
+ *-----------------------------------------------------------------
+ */
+
+extern int eth_init (bd_t * bd);
+extern void eth_halt (void);
+extern int eth_rx (void);
+extern int eth_send (volatile void *packet, int length);
+#if 0
+static int smc_hw_init (void);
+#endif
+
+/*
+ * This is called by register_netdev(). It is responsible for
+ * checking the portlist for the SMC9000 series chipset. If it finds
+ * one, then it will initialize the device, find the hardware information,
+ * and sets up the appropriate device parameters.
+ * NOTE: Interrupts are *OFF* when this procedure is called.
+ *
+ * NB:This shouldn't be static since it is referred to externally.
+ */
+int smc_init (void);
+
+/*
+ * This is called by unregister_netdev(). It is responsible for
+ * cleaning up before the driver is finally unregistered and discarded.
+ */
+void smc_destructor (void);
+
+/*
+ * The kernel calls this function when someone wants to use the device,
+ * typically 'ifconfig ethX up'.
+ */
+static int smc_open (bd_t *bd);
+
+
+/*
+ * This is called by the kernel in response to 'ifconfig ethX down'. It
+ * is responsible for cleaning up everything that the open routine
+ * does, and maybe putting the card into a powerdown state.
+ */
+static int smc_close (void);
+
+/*
+ * This is a separate procedure to handle the receipt of a packet, to
+ * leave the interrupt code looking slightly cleaner
+ */
+static int smc_rcv (void);
+
+/* See if a MAC address is defined in the current environment. If so use it. If not
+ . print a warning and set the environment and other globals with the default.
+ . If an EEPROM is present it really should be consulted.
+*/
+int smc_get_ethaddr(bd_t *bd);
+int get_rom_mac(unsigned char *v_rom_mac);
+
+/* ------------------------------------------------------------
+ * Internal routines
+ * ------------------------------------------------------------
+ */
+
+static unsigned char smc_mac_addr[] = { 0xc0, 0x00, 0x00, 0x1b, 0x62, 0x9c };
+
+/*
+ * This function must be called before smc_open() if you want to override
+ * the default mac address.
+ */
+
+void smc_set_mac_addr (const unsigned char *addr)
+{
+ int i;
+
+ for (i = 0; i < sizeof (smc_mac_addr); i++) {
+ smc_mac_addr[i] = addr[i];
+ }
+}
+
+/*
+ * smc_get_macaddr is no longer used. If you want to override the default
+ * mac address, call smc_get_mac_addr as a part of the board initialisation.
+ */
+
+#if 0
+void smc_get_macaddr (byte * addr)
+{
+ /* MAC ADDRESS AT FLASHBLOCK 1 / OFFSET 0x10 */
+ unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010);
+ int i;
+
+
+ for (i = 0; i < 6; i++) {
+ addr[0] = *(dnp1110_mac + 0);
+ addr[1] = *(dnp1110_mac + 1);
+ addr[2] = *(dnp1110_mac + 2);
+ addr[3] = *(dnp1110_mac + 3);
+ addr[4] = *(dnp1110_mac + 4);
+ addr[5] = *(dnp1110_mac + 5);
+ }
+}
+#endif /* 0 */
+
+/***********************************************
+ * Show available memory *
+ ***********************************************/
+void dump_memory_info (void)
+{
+ word mem_info;
+ word old_bank;
+
+ old_bank = SMC_inw (LAN91C96_BANK_SELECT) & 0xF;
+
+ SMC_SELECT_BANK (0);
+ mem_info = SMC_inw (LAN91C96_MIR);
+ PRINTK2 ("Memory: %4d available\n", (mem_info >> 8) * 2048);
+
+ SMC_SELECT_BANK (old_bank);
+}
+
+/*
+ * A rather simple routine to print out a packet for debugging purposes.
+ */
+#if SMC_DEBUG > 2
+static void print_packet (byte *, int);
+#endif
+
+/* #define tx_done(dev) 1 */
+
+
+/* this does a soft reset on the device */
+static void smc_reset (void);
+
+/* Enable Interrupts, Receive, and Transmit */
+static void smc_enable (void);
+
+/* this puts the device in an inactive state */
+static void smc_shutdown (void);
+
+
+static int poll4int (byte mask, int timeout)
+{
+ int tmo = get_timer (0) + timeout * CFG_HZ;
+ int is_timeout = 0;
+ word old_bank = SMC_inw (LAN91C96_BANK_SELECT);
+
+ PRINTK2 ("Polling...\n");
+ SMC_SELECT_BANK (2);
+ while ((SMC_inw (LAN91C96_INT_STATS) & mask) == 0) {
+ if (get_timer (0) >= tmo) {
+ is_timeout = 1;
+ break;
+ }
+ }
+
+ /* restore old bank selection */
+ SMC_SELECT_BANK (old_bank);
+
+ if (is_timeout)
+ return 1;
+ else
+ return 0;
+}
+
+/*
+ * Function: smc_reset( void )
+ * Purpose:
+ * This sets the SMC91111 chip to its normal state, hopefully from whatever
+ * mess that any other DOS driver has put it in.
+ *
+ * Maybe I should reset more registers to defaults in here? SOFTRST should
+ * do that for me.
+ *
+ * Method:
+ * 1. send a SOFT RESET
+ * 2. wait for it to finish
+ * 3. enable autorelease mode
+ * 4. reset the memory management unit
+ * 5. clear all interrupts
+ *
+*/
+static void smc_reset (void)
+{
+ PRINTK2 ("%s:smc_reset\n", SMC_DEV_NAME);
+
+ /* This resets the registers mostly to defaults, but doesn't
+ affect EEPROM. That seems unnecessary */
+ SMC_SELECT_BANK (0);
+ SMC_outw (LAN91C96_RCR_SOFT_RST, LAN91C96_RCR);
+
+ udelay (10);
+
+ /* Disable transmit and receive functionality */
+ SMC_outw (0, LAN91C96_RCR);
+ SMC_outw (0, LAN91C96_TCR);
+
+ /* set the control register */
+ SMC_SELECT_BANK (1);
+ SMC_outw (SMC_inw (LAN91C96_CONTROL) | LAN91C96_CTR_BIT_8,
+ LAN91C96_CONTROL);
+
+ /* Disable all interrupts */
+ SMC_outb (0, LAN91C96_INT_MASK);
+}
+
+/*
+ * Function: smc_enable
+ * Purpose: let the chip talk to the outside work
+ * Method:
+ * 1. Initialize the Memory Configuration Register
+ * 2. Enable the transmitter
+ * 3. Enable the receiver
+*/
+static void smc_enable ()
+{
+ PRINTK2 ("%s:smc_enable\n", SMC_DEV_NAME);
+ SMC_SELECT_BANK (0);
+
+ /* Initialize the Memory Configuration Register. See page
+ 49 of the LAN91C96 data sheet for details. */
+ SMC_outw (LAN91C96_MCR_TRANSMIT_PAGES, LAN91C96_MCR);
+
+ /* Initialize the Transmit Control Register */
+ SMC_outw (LAN91C96_TCR_TXENA, LAN91C96_TCR);
+ /* Initialize the Receive Control Register
+ * FIXME:
+ * The promiscuous bit set because I could not receive ARP reply
+ * packets from the server when I send a ARP request. It only works
+ * when I set the promiscuous bit
+ */
+ SMC_outw (LAN91C96_RCR_RXEN | LAN91C96_RCR_PRMS, LAN91C96_RCR);
+}
+
+/*
+ * Function: smc_shutdown
+ * Purpose: closes down the SMC91xxx chip.
+ * Method:
+ * 1. zero the interrupt mask
+ * 2. clear the enable receive flag
+ * 3. clear the enable xmit flags
+ *
+ * TODO:
+ * (1) maybe utilize power down mode.
+ * Why not yet? Because while the chip will go into power down mode,
+ * the manual says that it will wake up in response to any I/O requests
+ * in the register space. Empirical results do not show this working.
+ */
+static void smc_shutdown ()
+{
+ PRINTK2 (CARDNAME ":smc_shutdown\n");
+
+ /* no more interrupts for me */
+ SMC_SELECT_BANK (2);
+ SMC_outb (0, LAN91C96_INT_MASK);
+
+ /* and tell the card to stay away from that nasty outside world */
+ SMC_SELECT_BANK (0);
+ SMC_outb (0, LAN91C96_RCR);
+ SMC_outb (0, LAN91C96_TCR);
+}
+
+
+/*
+ * Function: smc_hardware_send_packet(struct net_device * )
+ * Purpose:
+ * This sends the actual packet to the SMC9xxx chip.
+ *
+ * Algorithm:
+ * First, see if a saved_skb is available.
+ * ( this should NOT be called if there is no 'saved_skb'
+ * Now, find the packet number that the chip allocated
+ * Point the data pointers at it in memory
+ * Set the length word in the chip's memory
+ * Dump the packet to chip memory
+ * Check if a last byte is needed ( odd length packet )
+ * if so, set the control flag right
+ * Tell the card to send it
+ * Enable the transmit interrupt, so I know if it failed
+ * Free the kernel data if I actually sent it.
+ */
+static int smc_send_packet (volatile void *packet, int packet_length)
+{
+ byte packet_no;
+ unsigned long ioaddr;
+ byte *buf;
+ int length;
+ int numPages;
+ int try = 0;
+ int time_out;
+ byte status;
+
+
+ PRINTK3 ("%s:smc_hardware_send_packet\n", SMC_DEV_NAME);
+
+ length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
+
+ /* allocate memory
+ ** The MMU wants the number of pages to be the number of 256 bytes
+ ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
+ **
+ ** The 91C111 ignores the size bits, but the code is left intact
+ ** for backwards and future compatibility.
+ **
+ ** Pkt size for allocating is data length +6 (for additional status
+ ** words, length and ctl!)
+ **
+ ** If odd size then last byte is included in this header.
+ */
+ numPages = ((length & 0xfffe) + 6);
+ numPages >>= 8; /* Divide by 256 */
+
+ if (numPages > 7) {
+ printf ("%s: Far too big packet error. \n", SMC_DEV_NAME);
+ return 0;
+ }
+
+ /* now, try to allocate the memory */
+
+ SMC_SELECT_BANK (2);
+ SMC_outw (LAN91C96_MMUCR_ALLOC_TX | numPages, LAN91C96_MMU);
+
+ again:
+ try++;
+ time_out = MEMORY_WAIT_TIME;
+ do {
+ status = SMC_inb (LAN91C96_INT_STATS);
+ if (status & LAN91C96_IST_ALLOC_INT) {
+
+ SMC_outb (LAN91C96_IST_ALLOC_INT, LAN91C96_INT_STATS);
+ break;
+ }
+ } while (--time_out);
+
+ if (!time_out) {
+ PRINTK2 ("%s: memory allocation, try %d failed ...\n",
+ SMC_DEV_NAME, try);
+ if (try < SMC_ALLOC_MAX_TRY)
+ goto again;
+ else
+ return 0;
+ }
+
+ PRINTK2 ("%s: memory allocation, try %d succeeded ...\n",
+ SMC_DEV_NAME, try);
+
+ /* I can send the packet now.. */
+
+ ioaddr = SMC_BASE_ADDRESS;
+
+ buf = (byte *) packet;
+
+ /* If I get here, I _know_ there is a packet slot waiting for me */
+ packet_no = SMC_inb (LAN91C96_ARR);
+ if (packet_no & LAN91C96_ARR_FAILED) {
+ /* or isn't there? BAD CHIP! */
+ printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME);
+ return 0;
+ }
+
+ /* we have a packet address, so tell the card to use it */
+ SMC_outb (packet_no, LAN91C96_PNR);
+
+ /* point to the beginning of the packet */
+ SMC_outw (LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER);
+
+ PRINTK3 ("%s: Trying to xmit packet of length %x\n",
+ SMC_DEV_NAME, length);
+
+#if SMC_DEBUG > 2
+ printf ("Transmitting Packet\n");
+ print_packet (buf, length);
+#endif
+
+ /* send the packet length ( +6 for status, length and ctl byte )
+ and the status word ( set to zeros ) */
+#ifdef USE_32_BIT
+ SMC_outl ((length + 6) << 16, LAN91C96_DATA_HIGH);
+#else
+ SMC_outw (0, LAN91C96_DATA_HIGH);
+ /* send the packet length ( +6 for status words, length, and ctl */
+ SMC_outw ((length + 6), LAN91C96_DATA_HIGH);
+#endif /* USE_32_BIT */
+
+ /* send the actual data
+ * I _think_ it's faster to send the longs first, and then
+ * mop up by sending the last word. It depends heavily
+ * on alignment, at least on the 486. Maybe it would be
+ * a good idea to check which is optimal? But that could take
+ * almost as much time as is saved?
+ */
+#ifdef USE_32_BIT
+ SMC_outsl (LAN91C96_DATA_HIGH, buf, length >> 2);
+ if (length & 0x2)
+ SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))),
+ LAN91C96_DATA_HIGH);
+#else
+ SMC_outsw (LAN91C96_DATA_HIGH, buf, (length) >> 1);
+#endif /* USE_32_BIT */
+
+ /* Send the last byte, if there is one. */
+ if ((length & 1) == 0) {
+ SMC_outw (0, LAN91C96_DATA_HIGH);
+ } else {
+ SMC_outw (buf[length - 1] | 0x2000, LAN91C96_DATA_HIGH);
+ }
+
+ /* and let the chipset deal with it */
+ SMC_outw (LAN91C96_MMUCR_ENQUEUE, LAN91C96_MMU);
+
+ /* poll for TX INT */
+ if (poll4int (LAN91C96_MSK_TX_INT, SMC_TX_TIMEOUT)) {
+ /* sending failed */
+ PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME);
+
+ /* release packet */
+ SMC_outw (LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU);
+
+ /* wait for MMU getting ready (low) */
+ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) {
+ udelay (10);
+ }
+
+ PRINTK2 ("MMU ready\n");
+
+
+ return 0;
+ } else {
+ /* ack. int */
+ SMC_outw (LAN91C96_IST_TX_INT, LAN91C96_INT_STATS);
+
+ PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME, length);
+
+ /* release packet */
+ SMC_outw (LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU);
+
+ /* wait for MMU getting ready (low) */
+ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) {
+ udelay (10);
+ }
+
+ PRINTK2 ("MMU ready\n");
+ }
+
+ return length;
+}
+
+/*-------------------------------------------------------------------------
+ * smc_destructor( struct net_device * dev )
+ * Input parameters:
+ * dev, pointer to the device structure
+ *
+ * Output:
+ * None.
+ *--------------------------------------------------------------------------
+ */
+void smc_destructor ()
+{
+ PRINTK2 (CARDNAME ":smc_destructor\n");
+}
+
+
+/*
+ * Open and Initialize the board
+ *
+ * Set up everything, reset the card, etc ..
+ *
+ */
+static int smc_open (bd_t *bd)
+{
+ int i, err; /* used to set hw ethernet address */
+
+ PRINTK2 ("%s:smc_open\n", SMC_DEV_NAME);
+
+ /* reset the hardware */
+
+ smc_reset ();
+ smc_enable ();
+
+ SMC_SELECT_BANK (1);
+
+ err = smc_get_ethaddr (bd); /* set smc_mac_addr, and sync it with u-boot globals */
+ if (err < 0) {
+ memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */
+ return (-1); /* upper code ignores this, but NOT bi_enetaddr */
+ }
+#ifdef USE_32_BIT
+ for (i = 0; i < 6; i += 2) {
+ word address;
+
+ address = smc_mac_addr[i + 1] << 8;
+ address |= smc_mac_addr[i];
+ SMC_outw (address, LAN91C96_IA0 + i);
+ }
+#else
+ for (i = 0; i < 6; i++)
+ SMC_outb (smc_mac_addr[i], LAN91C96_IA0 + i);
+#endif
+ return 0;
+}
+
+/*-------------------------------------------------------------
+ *
+ * smc_rcv - receive a packet from the card
+ *
+ * There is ( at least ) a packet waiting to be read from
+ * chip-memory.
+ *
+ * o Read the status
+ * o If an error, record it
+ * o otherwise, read in the packet
+ *-------------------------------------------------------------
+ */
+static int smc_rcv ()
+{
+ int packet_number;
+ word status;
+ word packet_length;
+ int is_error = 0;
+
+#ifdef USE_32_BIT
+ dword stat_len;
+#endif
+
+
+ SMC_SELECT_BANK (2);
+ packet_number = SMC_inw (LAN91C96_FIFO);
+
+ if (packet_number & LAN91C96_FIFO_RXEMPTY) {
+ return 0;
+ }
+
+ PRINTK3 ("%s:smc_rcv\n", SMC_DEV_NAME);
+ /* start reading from the start of the packet */
+ SMC_outw (LAN91C96_PTR_READ | LAN91C96_PTR_RCV |
+ LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER);
+
+ /* First two words are status and packet_length */
+#ifdef USE_32_BIT
+ stat_len = SMC_inl (LAN91C96_DATA_HIGH);
+ status = stat_len & 0xffff;
+ packet_length = stat_len >> 16;
+#else
+ status = SMC_inw (LAN91C96_DATA_HIGH);
+ packet_length = SMC_inw (LAN91C96_DATA_HIGH);
+#endif
+
+ packet_length &= 0x07ff; /* mask off top bits */
+
+ PRINTK2 ("RCV: STATUS %4x LENGTH %4x\n", status, packet_length);
+
+ if (!(status & FRAME_FILTER)) {
+ /* Adjust for having already read the first two words */
+ packet_length -= 4; /*4; */
+
+
+ /* set odd length for bug in LAN91C111, */
+ /* which never sets RS_ODDFRAME */
+ /* TODO ? */
+
+
+#ifdef USE_32_BIT
+ PRINTK3 (" Reading %d dwords (and %d bytes) \n",
+ packet_length >> 2, packet_length & 3);
+ /* QUESTION: Like in the TX routine, do I want
+ to send the DWORDs or the bytes first, or some
+ mixture. A mixture might improve already slow PIO
+ performance */
+ SMC_insl (LAN91C96_DATA_HIGH, NetRxPackets[0], packet_length >> 2);
+ /* read the left over bytes */
+ if (packet_length & 3) {
+ int i;
+
+ byte *tail = (byte *) (NetRxPackets[0] + (packet_length & ~3));
+ dword leftover = SMC_inl (LAN91C96_DATA_HIGH);
+
+ for (i = 0; i < (packet_length & 3); i++)
+ *tail++ = (byte) (leftover >> (8 * i)) & 0xff;
+ }
+#else
+ PRINTK3 (" Reading %d words and %d byte(s) \n",
+ (packet_length >> 1), packet_length & 1);
+ SMC_insw (LAN91C96_DATA_HIGH, NetRxPackets[0], packet_length >> 1);
+
+#endif /* USE_32_BIT */
+
+#if SMC_DEBUG > 2
+ printf ("Receiving Packet\n");
+ print_packet (NetRxPackets[0], packet_length);
+#endif
+ } else {
+ /* error ... */
+ /* TODO ? */
+ is_error = 1;
+ }
+
+ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
+ udelay (1); /* Wait until not busy */
+
+ /* error or good, tell the card to get rid of this packet */
+ SMC_outw (LAN91C96_MMUCR_RELEASE_RX, LAN91C96_MMU);
+
+ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
+ udelay (1); /* Wait until not busy */
+
+ if (!is_error) {
+ /* Pass the packet up to the protocol layers. */
+ NetReceive (NetRxPackets[0], packet_length);
+ return packet_length;
+ } else {
+ return 0;
+ }
+
+}
+
+/*----------------------------------------------------
+ * smc_close
+ *
+ * this makes the board clean up everything that it can
+ * and not talk to the outside world. Caused by
+ * an 'ifconfig ethX down'
+ *
+ -----------------------------------------------------*/
+static int smc_close ()
+{
+ PRINTK2 ("%s:smc_close\n", SMC_DEV_NAME);
+
+ /* clear everything */
+ smc_shutdown ();
+
+ return 0;
+}
+
+#if SMC_DEBUG > 2
+static void print_packet (byte * buf, int length)
+{
+#if 0
+ int i;
+ int remainder;
+ int lines;
+
+ printf ("Packet of length %d \n", length);
+
+ lines = length / 16;
+ remainder = length % 16;
+
+ for (i = 0; i < lines; i++) {
+ int cur;
+
+ for (cur = 0; cur < 8; cur++) {
+ byte a, b;
+
+ a = *(buf++);
+ b = *(buf++);
+ printf ("%02x%02x ", a, b);
+ }
+ printf ("\n");
+ }
+ for (i = 0; i < remainder / 2; i++) {
+ byte a, b;
+
+ a = *(buf++);
+ b = *(buf++);
+ printf ("%02x%02x ", a, b);
+ }
+ printf ("\n");
+#endif /* 0 */
+}
+#endif /* SMC_DEBUG > 2 */
+
+int eth_init (bd_t * bd)
+{
+ return (smc_open(bd));
+}
+
+void eth_halt ()
+{
+ smc_close ();
+}
+
+int eth_rx ()
+{
+ return smc_rcv ();
+}
+
+int eth_send (volatile void *packet, int length)
+{
+ return smc_send_packet (packet, length);
+}
+
+
+#if 0
+/*-------------------------------------------------------------------------
+ * smc_hw_init()
+ *
+ * Function:
+ * Reset and enable the device, check if the I/O space location
+ * is correct
+ *
+ * Input parameters:
+ * None
+ *
+ * Output:
+ * 0 --> success
+ * 1 --> error
+ *--------------------------------------------------------------------------
+ */
+static int smc_hw_init ()
+{
+ unsigned short status_test;
+
+ /* The attribute register of the LAN91C96 is located at address
+ 0x0e000000 on the lubbock platform */
+ volatile unsigned *attaddr = (unsigned *) (0x0e000000);
+
+ /* first reset, then enable the device. Sequence is critical */
+ attaddr[LAN91C96_ECOR] |= LAN91C96_ECOR_SRESET;
+ udelay (100);
+ attaddr[LAN91C96_ECOR] &= ~LAN91C96_ECOR_SRESET;
+ attaddr[LAN91C96_ECOR] |= LAN91C96_ECOR_ENABLE;
+
+ /* force 16-bit mode */
+ attaddr[LAN91C96_ECSR] &= ~LAN91C96_ECSR_IOIS8;
+ udelay (100);
+
+ /* check if the I/O address is correct, the upper byte of the
+ bank select register should read 0x33 */
+
+ status_test = SMC_inw (LAN91C96_BANK_SELECT);
+ if ((status_test & 0xFF00) != 0x3300) {
+ printf ("Failed to initialize ethernetchip\n");
+ return 1;
+ }
+ return 0;
+}
+#endif /* 0 */
+
+#endif /* COMMANDS & CFG_NET */
+
+
+/* smc_get_ethaddr (bd_t * bd)
+ *
+ * This checks both the environment and the ROM for an ethernet address. If
+ * found, the environment takes precedence.
+ */
+
+int smc_get_ethaddr (bd_t * bd)
+{
+ int env_size = 0;
+ int rom_valid = 0;
+ int env_present = 0;
+ int reg = 0;
+ char *s = NULL;
+ char *e = NULL;
+ char *v_mac, es[] = "11:22:33:44:55:66";
+ char s_env_mac[64];
+ uchar v_env_mac[6];
+ uchar v_rom_mac[6];
+
+ env_size = getenv_r ("ethaddr", s_env_mac, sizeof (s_env_mac));
+ if (env_size != sizeof(es)) { /* Ignore if env is bad or not set */
+ printf ("\n*** Warning: ethaddr is not set properly, ignoring!!\n");
+ } else {
+ env_present = 1;
+ s = s_env_mac;
+
+ for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */
+ v_env_mac[reg] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+ }
+
+ rom_valid = get_rom_mac (v_rom_mac); /* get ROM mac value if any */
+
+ if (!env_present) { /* if NO env */
+ if (rom_valid) { /* but ROM is valid */
+ v_mac = (char *)v_rom_mac;
+ sprintf (s_env_mac, "%02X:%02X:%02X:%02X:%02X:%02X",
+ v_mac[0], v_mac[1], v_mac[2], v_mac[3],
+ v_mac[4], v_mac[5]);
+ setenv ("ethaddr", s_env_mac);
+ } else { /* no env, bad ROM */
+ printf ("\n*** ERROR: ethaddr is NOT set !!\n");
+ return (-1);
+ }
+ } else { /* good env, don't care ROM */
+ v_mac = (char *)v_env_mac; /* always use a good env over a ROM */
+ }
+
+ if (env_present && rom_valid) { /* if both env and ROM are good */
+ if (memcmp (v_env_mac, v_rom_mac, 6) != 0) {
+ printf ("\nWarning: MAC addresses don't match:\n");
+ printf ("\tHW MAC address: "
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ v_rom_mac[0], v_rom_mac[1],
+ v_rom_mac[2], v_rom_mac[3],
+ v_rom_mac[4], v_rom_mac[5] );
+ printf ("\t\"ethaddr\" value: "
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ v_env_mac[0], v_env_mac[1],
+ v_env_mac[2], v_env_mac[3],
+ v_env_mac[4], v_env_mac[5]) ;
+ debug ("### Set MAC addr from environment\n");
+ }
+ }
+ memcpy (bd->bi_enetaddr, v_mac, 6); /* update global address to match env (allows env changing) */
+ smc_set_mac_addr ((unsigned char *)v_mac); /* use old function to update smc default */
+ PRINTK("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", v_mac[0], v_mac[1],
+ v_mac[2], v_mac[3], v_mac[4], v_mac[5]);
+ return (0);
+}
+
+/*
+ * get_rom_mac()
+ * Note, this has omly been tested for the OMAP730 P2.
+ */
+
+int get_rom_mac (unsigned char *v_rom_mac)
+{
+#ifdef HARDCODE_MAC /* used for testing or to supress run time warnings */
+ char hw_mac_addr[] = { 0x02, 0x80, 0xad, 0x20, 0x31, 0xb8 };
+
+ memcpy (v_rom_mac, hw_mac_addr, 6);
+ return (1);
+#else
+ int i;
+ SMC_SELECT_BANK (1);
+ for (i=0; i<6; i++)
+ {
+ v_rom_mac[i] = SMC_inb (LAN91C96_IA0 + i);
+ }
+ return (1);
+#endif
+}
+
+#endif /* CONFIG_DRIVER_LAN91C96 */
diff --git a/drivers/net/lan91c96.h b/drivers/net/lan91c96.h
new file mode 100644
index 0000000..7d33a82
--- /dev/null
+++ b/drivers/net/lan91c96.h
@@ -0,0 +1,643 @@
+/*------------------------------------------------------------------------
+ * lan91c96.h
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Rolf Offermanns <rof@sysgo.de>
+ * Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
+ * Developed by Simple Network Magic Corporation (SNMC)
+ * Copyright (C) 1996 by Erik Stahlman (ES)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * This file contains register information and access macros for
+ * the LAN91C96 single chip ethernet controller. It is a modified
+ * version of the smc9111.h file.
+ *
+ * Information contained in this file was obtained from the LAN91C96
+ * manual from SMC. To get a copy, if you really want one, you can find
+ * information under www.smsc.com.
+ *
+ * Authors
+ * Erik Stahlman ( erik@vt.edu )
+ * Daris A Nevil ( dnevil@snmc.com )
+ *
+ * History
+ * 04/30/03 Mathijs Haarman Modified smc91111.h (u-boot version)
+ * for lan91c96
+ *-------------------------------------------------------------------------
+ */
+#ifndef _LAN91C96_H_
+#define _LAN91C96_H_
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <config.h>
+
+/*
+ * This function may be called by the board specific initialisation code
+ * in order to override the default mac address.
+ */
+
+void smc_set_mac_addr(const unsigned char *addr);
+
+
+/* I want some simple types */
+
+typedef unsigned char byte;
+typedef unsigned short word;
+typedef unsigned long int dword;
+
+/*
+ * DEBUGGING LEVELS
+ *
+ * 0 for normal operation
+ * 1 for slightly more details
+ * >2 for various levels of increasingly useless information
+ * 2 for interrupt tracking, status flags
+ * 3 for packet info
+ * 4 for complete packet dumps
+ */
+/*#define SMC_DEBUG 0 */
+
+/* Because of bank switching, the LAN91xxx uses only 16 I/O ports */
+
+#define SMC_IO_EXTENT 16
+
+#ifdef CONFIG_PXA250
+
+#ifdef CONFIG_LUBBOCK
+#define SMC_IO_SHIFT 2
+#undef USE_32_BIT
+
+#else
+#define SMC_IO_SHIFT 0
+#endif
+
+#define SMCREG(r) (SMC_BASE_ADDRESS+((r)<<SMC_IO_SHIFT))
+
+#define SMC_inl(r) (*((volatile dword *)SMCREG(r)))
+#define SMC_inw(r) (*((volatile word *)SMCREG(r)))
+#define SMC_inb(p) ({ \
+ unsigned int __p = p; \
+ unsigned int __v = SMC_inw(__p & ~1); \
+ if (__p & 1) __v >>= 8; \
+ else __v &= 0xff; \
+ __v; })
+
+#define SMC_outl(d,r) (*((volatile dword *)SMCREG(r)) = d)
+#define SMC_outw(d,r) (*((volatile word *)SMCREG(r)) = d)
+#define SMC_outb(d,r) ({ word __d = (byte)(d); \
+ word __w = SMC_inw((r)&~1); \
+ __w &= ((r)&1) ? 0x00FF : 0xFF00; \
+ __w |= ((r)&1) ? __d<<8 : __d; \
+ SMC_outw(__w,(r)&~1); \
+ })
+
+#define SMC_outsl(r,b,l) ({ int __i; \
+ dword *__b2; \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outl( *(__b2 + __i), r ); \
+ } \
+ })
+
+#define SMC_outsw(r,b,l) ({ int __i; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outw( *(__b2 + __i), r ); \
+ } \
+ })
+
+#define SMC_insl(r,b,l) ({ int __i ; \
+ dword *__b2; \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inl(r); \
+ SMC_inl(0); \
+ }; \
+ })
+
+#define SMC_insw(r,b,l) ({ int __i ; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inw(r); \
+ SMC_inw(0); \
+ }; \
+ })
+
+#define SMC_insb(r,b,l) ({ int __i ; \
+ byte *__b2; \
+ __b2 = (byte *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inb(r); \
+ SMC_inb(0); \
+ }; \
+ })
+
+#else /* if not CONFIG_PXA250 */
+
+/*
+ * We have only 16 Bit PCMCIA access on Socket 0
+ */
+
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inb(r) (((r)&1) ? SMC_inw((r)&~1)>>8 : SMC_inw(r)&0xFF)
+
+#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d)
+#define SMC_outb(d,r) ({ word __d = (byte)(d); \
+ word __w = SMC_inw((r)&~1); \
+ __w &= ((r)&1) ? 0x00FF : 0xFF00; \
+ __w |= ((r)&1) ? __d<<8 : __d; \
+ SMC_outw(__w,(r)&~1); \
+ })
+#if 0
+#define SMC_outsw(r,b,l) outsw(SMC_BASE_ADDRESS+(r), (b), (l))
+#else
+#define SMC_outsw(r,b,l) ({ int __i; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outw( *(__b2 + __i), r); \
+ } \
+ })
+#endif
+
+#if 0
+#define SMC_insw(r,b,l) insw(SMC_BASE_ADDRESS+(r), (b), (l))
+#else
+#define SMC_insw(r,b,l) ({ int __i ; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inw(r); \
+ SMC_inw(0); \
+ }; \
+ })
+#endif
+
+#endif
+
+/*
+ ****************************************************************************
+ * Bank Select Field
+ ****************************************************************************
+ */
+#define LAN91C96_BANK_SELECT 14 /* Bank Select Register */
+#define LAN91C96_BANKSELECT (0x3UC << 0)
+#define BANK0 0x00
+#define BANK1 0x01
+#define BANK2 0x02
+#define BANK3 0x03
+#define BANK4 0x04
+
+/*
+ ****************************************************************************
+ * EEPROM Addresses.
+ ****************************************************************************
+ */
+#define EEPROM_MAC_OFFSET_1 0x6020
+#define EEPROM_MAC_OFFSET_2 0x6021
+#define EEPROM_MAC_OFFSET_3 0x6022
+
+/*
+ ****************************************************************************
+ * Bank 0 Register Map in I/O Space
+ ****************************************************************************
+ */
+#define LAN91C96_TCR 0 /* Transmit Control Register */
+#define LAN91C96_EPH_STATUS 2 /* EPH Status Register */
+#define LAN91C96_RCR 4 /* Receive Control Register */
+#define LAN91C96_COUNTER 6 /* Counter Register */
+#define LAN91C96_MIR 8 /* Memory Information Register */
+#define LAN91C96_MCR 10 /* Memory Configuration Register */
+
+/*
+ ****************************************************************************
+ * Transmit Control Register - Bank 0 - Offset 0
+ ****************************************************************************
+ */
+#define LAN91C96_TCR_TXENA (0x1U << 0)
+#define LAN91C96_TCR_LOOP (0x1U << 1)
+#define LAN91C96_TCR_FORCOL (0x1U << 2)
+#define LAN91C96_TCR_TXP_EN (0x1U << 3)
+#define LAN91C96_TCR_PAD_EN (0x1U << 7)
+#define LAN91C96_TCR_NOCRC (0x1U << 8)
+#define LAN91C96_TCR_MON_CSN (0x1U << 10)
+#define LAN91C96_TCR_FDUPLX (0x1U << 11)
+#define LAN91C96_TCR_STP_SQET (0x1U << 12)
+#define LAN91C96_TCR_EPH_LOOP (0x1U << 13)
+#define LAN91C96_TCR_ETEN_TYPE (0x1U << 14)
+#define LAN91C96_TCR_FDSE (0x1U << 15)
+
+/*
+ ****************************************************************************
+ * EPH Status Register - Bank 0 - Offset 2
+ ****************************************************************************
+ */
+#define LAN91C96_EPHSR_TX_SUC (0x1U << 0)
+#define LAN91C96_EPHSR_SNGL_COL (0x1U << 1)
+#define LAN91C96_EPHSR_MUL_COL (0x1U << 2)
+#define LAN91C96_EPHSR_LTX_MULT (0x1U << 3)
+#define LAN91C96_EPHSR_16COL (0x1U << 4)
+#define LAN91C96_EPHSR_SQET (0x1U << 5)
+#define LAN91C96_EPHSR_LTX_BRD (0x1U << 6)
+#define LAN91C96_EPHSR_TX_DEFR (0x1U << 7)
+#define LAN91C96_EPHSR_WAKEUP (0x1U << 8)
+#define LAN91C96_EPHSR_LATCOL (0x1U << 9)
+#define LAN91C96_EPHSR_LOST_CARR (0x1U << 10)
+#define LAN91C96_EPHSR_EXC_DEF (0x1U << 11)
+#define LAN91C96_EPHSR_CTR_ROL (0x1U << 12)
+
+#define LAN91C96_EPHSR_LINK_OK (0x1U << 14)
+#define LAN91C96_EPHSR_TX_UNRN (0x1U << 15)
+
+#define LAN91C96_EPHSR_ERRORS (LAN91C96_EPHSR_SNGL_COL | \
+ LAN91C96_EPHSR_MUL_COL | \
+ LAN91C96_EPHSR_16COL | \
+ LAN91C96_EPHSR_SQET | \
+ LAN91C96_EPHSR_TX_DEFR | \
+ LAN91C96_EPHSR_LATCOL | \
+ LAN91C96_EPHSR_LOST_CARR | \
+ LAN91C96_EPHSR_EXC_DEF | \
+ LAN91C96_EPHSR_LINK_OK | \
+ LAN91C96_EPHSR_TX_UNRN)
+
+/*
+ ****************************************************************************
+ * Receive Control Register - Bank 0 - Offset 4
+ ****************************************************************************
+ */
+#define LAN91C96_RCR_RX_ABORT (0x1U << 0)
+#define LAN91C96_RCR_PRMS (0x1U << 1)
+#define LAN91C96_RCR_ALMUL (0x1U << 2)
+#define LAN91C96_RCR_RXEN (0x1U << 8)
+#define LAN91C96_RCR_STRIP_CRC (0x1U << 9)
+#define LAN91C96_RCR_FILT_CAR (0x1U << 14)
+#define LAN91C96_RCR_SOFT_RST (0x1U << 15)
+
+/*
+ ****************************************************************************
+ * Counter Register - Bank 0 - Offset 6
+ ****************************************************************************
+ */
+#define LAN91C96_ECR_SNGL_COL (0xFU << 0)
+#define LAN91C96_ECR_MULT_COL (0xFU << 5)
+#define LAN91C96_ECR_DEF_TX (0xFU << 8)
+#define LAN91C96_ECR_EXC_DEF_TX (0xFU << 12)
+
+/*
+ ****************************************************************************
+ * Memory Information Register - Bank 0 - OFfset 8
+ ****************************************************************************
+ */
+#define LAN91C96_MIR_SIZE (0x18 << 0) /* 6144 bytes */
+
+/*
+ ****************************************************************************
+ * Memory Configuration Register - Bank 0 - Offset 10
+ ****************************************************************************
+ */
+#define LAN91C96_MCR_MEM_RES (0xFFU << 0)
+#define LAN91C96_MCR_MEM_MULT (0x3U << 9)
+#define LAN91C96_MCR_HIGH_ID (0x3U << 12)
+
+#define LAN91C96_MCR_TRANSMIT_PAGES 0x6
+
+/*
+ ****************************************************************************
+ * Bank 1 Register Map in I/O Space
+ ****************************************************************************
+ */
+#define LAN91C96_CONFIG 0 /* Configuration Register */
+#define LAN91C96_BASE 2 /* Base Address Register */
+#define LAN91C96_IA0 4 /* Individual Address Register - 0 */
+#define LAN91C96_IA1 5 /* Individual Address Register - 1 */
+#define LAN91C96_IA2 6 /* Individual Address Register - 2 */
+#define LAN91C96_IA3 7 /* Individual Address Register - 3 */
+#define LAN91C96_IA4 8 /* Individual Address Register - 4 */
+#define LAN91C96_IA5 9 /* Individual Address Register - 5 */
+#define LAN91C96_GEN_PURPOSE 10 /* General Address Registers */
+#define LAN91C96_CONTROL 12 /* Control Register */
+
+/*
+ ****************************************************************************
+ * Configuration Register - Bank 1 - Offset 0
+ ****************************************************************************
+ */
+#define LAN91C96_CR_INT_SEL0 (0x1U << 1)
+#define LAN91C96_CR_INT_SEL1 (0x1U << 2)
+#define LAN91C96_CR_RES (0x3U << 3)
+#define LAN91C96_CR_DIS_LINK (0x1U << 6)
+#define LAN91C96_CR_16BIT (0x1U << 7)
+#define LAN91C96_CR_AUI_SELECT (0x1U << 8)
+#define LAN91C96_CR_SET_SQLCH (0x1U << 9)
+#define LAN91C96_CR_FULL_STEP (0x1U << 10)
+#define LAN91C96_CR_NO_WAIT (0x1U << 12)
+
+/*
+ ****************************************************************************
+ * Base Address Register - Bank 1 - Offset 2
+ ****************************************************************************
+ */
+#define LAN91C96_BAR_RA_BITS (0x27U << 0)
+#define LAN91C96_BAR_ROM_SIZE (0x1U << 6)
+#define LAN91C96_BAR_A_BITS (0xFFU << 8)
+
+/*
+ ****************************************************************************
+ * Control Register - Bank 1 - Offset 12
+ ****************************************************************************
+ */
+#define LAN91C96_CTR_STORE (0x1U << 0)
+#define LAN91C96_CTR_RELOAD (0x1U << 1)
+#define LAN91C96_CTR_EEPROM (0x1U << 2)
+#define LAN91C96_CTR_TE_ENABLE (0x1U << 5)
+#define LAN91C96_CTR_CR_ENABLE (0x1U << 6)
+#define LAN91C96_CTR_LE_ENABLE (0x1U << 7)
+#define LAN91C96_CTR_BIT_8 (0x1U << 8)
+#define LAN91C96_CTR_AUTO_RELEASE (0x1U << 11)
+#define LAN91C96_CTR_WAKEUP_EN (0x1U << 12)
+#define LAN91C96_CTR_PWRDN (0x1U << 13)
+#define LAN91C96_CTR_RCV_BAD (0x1U << 14)
+
+/*
+ ****************************************************************************
+ * Bank 2 Register Map in I/O Space
+ ****************************************************************************
+ */
+#define LAN91C96_MMU 0 /* MMU Command Register */
+#define LAN91C96_AUTO_TX_START 1 /* Auto Tx Start Register */
+#define LAN91C96_PNR 2 /* Packet Number Register */
+#define LAN91C96_ARR 3 /* Allocation Result Register */
+#define LAN91C96_FIFO 4 /* FIFO Ports Register */
+#define LAN91C96_POINTER 6 /* Pointer Register */
+#define LAN91C96_DATA_HIGH 8 /* Data High Register */
+#define LAN91C96_DATA_LOW 10 /* Data Low Register */
+#define LAN91C96_INT_STATS 12 /* Interrupt Status Register - RO */
+#define LAN91C96_INT_ACK 12 /* Interrupt Acknowledge Register -WO */
+#define LAN91C96_INT_MASK 13 /* Interrupt Mask Register */
+
+/*
+ ****************************************************************************
+ * MMU Command Register - Bank 2 - Offset 0
+ ****************************************************************************
+ */
+#define LAN91C96_MMUCR_NO_BUSY (0x1U << 0)
+#define LAN91C96_MMUCR_N1 (0x1U << 1)
+#define LAN91C96_MMUCR_N2 (0x1U << 2)
+#define LAN91C96_MMUCR_COMMAND (0xFU << 4)
+#define LAN91C96_MMUCR_ALLOC_TX (0x2U << 4) /* WXYZ = 0010 */
+#define LAN91C96_MMUCR_RESET_MMU (0x4U << 4) /* WXYZ = 0100 */
+#define LAN91C96_MMUCR_REMOVE_RX (0x6U << 4) /* WXYZ = 0110 */
+#define LAN91C96_MMUCR_REMOVE_TX (0x7U << 4) /* WXYZ = 0111 */
+#define LAN91C96_MMUCR_RELEASE_RX (0x8U << 4) /* WXYZ = 1000 */
+#define LAN91C96_MMUCR_RELEASE_TX (0xAU << 4) /* WXYZ = 1010 */
+#define LAN91C96_MMUCR_ENQUEUE (0xCU << 4) /* WXYZ = 1100 */
+#define LAN91C96_MMUCR_RESET_TX (0xEU << 4) /* WXYZ = 1110 */
+
+/*
+ ****************************************************************************
+ * Auto Tx Start Register - Bank 2 - Offset 1
+ ****************************************************************************
+ */
+#define LAN91C96_AUTOTX (0xFFU << 0)
+
+/*
+ ****************************************************************************
+ * Packet Number Register - Bank 2 - Offset 2
+ ****************************************************************************
+ */
+#define LAN91C96_PNR_TX (0x1FU << 0)
+
+/*
+ ****************************************************************************
+ * Allocation Result Register - Bank 2 - Offset 3
+ ****************************************************************************
+ */
+#define LAN91C96_ARR_ALLOC_PN (0x7FU << 0)
+#define LAN91C96_ARR_FAILED (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * FIFO Ports Register - Bank 2 - Offset 4
+ ****************************************************************************
+ */
+#define LAN91C96_FIFO_TX_DONE_PN (0x1FU << 0)
+#define LAN91C96_FIFO_TEMPTY (0x1U << 7)
+#define LAN91C96_FIFO_RX_DONE_PN (0x1FU << 8)
+#define LAN91C96_FIFO_RXEMPTY (0x1U << 15)
+
+/*
+ ****************************************************************************
+ * Pointer Register - Bank 2 - Offset 6
+ ****************************************************************************
+ */
+#define LAN91C96_PTR_LOW (0xFFU << 0)
+#define LAN91C96_PTR_HIGH (0x7U << 8)
+#define LAN91C96_PTR_AUTO_TX (0x1U << 11)
+#define LAN91C96_PTR_ETEN (0x1U << 12)
+#define LAN91C96_PTR_READ (0x1U << 13)
+#define LAN91C96_PTR_AUTO_INCR (0x1U << 14)
+#define LAN91C96_PTR_RCV (0x1U << 15)
+
+#define LAN91C96_PTR_RX_FRAME (LAN91C96_PTR_RCV | \
+ LAN91C96_PTR_AUTO_INCR | \
+ LAN91C96_PTR_READ)
+
+/*
+ ****************************************************************************
+ * Data Register - Bank 2 - Offset 8
+ ****************************************************************************
+ */
+#define LAN91C96_CONTROL_CRC (0x1U << 4) /* CRC bit */
+#define LAN91C96_CONTROL_ODD (0x1U << 5) /* ODD bit */
+
+/*
+ ****************************************************************************
+ * Interrupt Status Register - Bank 2 - Offset 12
+ ****************************************************************************
+ */
+#define LAN91C96_IST_RCV_INT (0x1U << 0)
+#define LAN91C96_IST_TX_INT (0x1U << 1)
+#define LAN91C96_IST_TX_EMPTY_INT (0x1U << 2)
+#define LAN91C96_IST_ALLOC_INT (0x1U << 3)
+#define LAN91C96_IST_RX_OVRN_INT (0x1U << 4)
+#define LAN91C96_IST_EPH_INT (0x1U << 5)
+#define LAN91C96_IST_ERCV_INT (0x1U << 6)
+#define LAN91C96_IST_RX_IDLE_INT (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * Interrupt Acknowledge Register - Bank 2 - Offset 12
+ ****************************************************************************
+ */
+#define LAN91C96_ACK_TX_INT (0x1U << 1)
+#define LAN91C96_ACK_TX_EMPTY_INT (0x1U << 2)
+#define LAN91C96_ACK_RX_OVRN_INT (0x1U << 4)
+#define LAN91C96_ACK_ERCV_INT (0x1U << 6)
+
+/*
+ ****************************************************************************
+ * Interrupt Mask Register - Bank 2 - Offset 13
+ ****************************************************************************
+ */
+#define LAN91C96_MSK_RCV_INT (0x1U << 0)
+#define LAN91C96_MSK_TX_INT (0x1U << 1)
+#define LAN91C96_MSK_TX_EMPTY_INT (0x1U << 2)
+#define LAN91C96_MSK_ALLOC_INT (0x1U << 3)
+#define LAN91C96_MSK_RX_OVRN_INT (0x1U << 4)
+#define LAN91C96_MSK_EPH_INT (0x1U << 5)
+#define LAN91C96_MSK_ERCV_INT (0x1U << 6)
+#define LAN91C96_MSK_TX_IDLE_INT (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * Bank 3 Register Map in I/O Space
+ **************************************************************************
+ */
+#define LAN91C96_MGMT_MDO (0x1U << 0)
+#define LAN91C96_MGMT_MDI (0x1U << 1)
+#define LAN91C96_MGMT_MCLK (0x1U << 2)
+#define LAN91C96_MGMT_MDOE (0x1U << 3)
+#define LAN91C96_MGMT_LOW_ID (0x3U << 4)
+#define LAN91C96_MGMT_IOS0 (0x1U << 8)
+#define LAN91C96_MGMT_IOS1 (0x1U << 9)
+#define LAN91C96_MGMT_IOS2 (0x1U << 10)
+#define LAN91C96_MGMT_nXNDEC (0x1U << 11)
+#define LAN91C96_MGMT_HIGH_ID (0x3U << 12)
+
+/*
+ ****************************************************************************
+ * Revision Register - Bank 3 - Offset 10
+ ****************************************************************************
+ */
+#define LAN91C96_REV_REVID (0xFU << 0)
+#define LAN91C96_REV_CHIPID (0xFU << 4)
+
+/*
+ ****************************************************************************
+ * Early RCV Register - Bank 3 - Offset 12
+ ****************************************************************************
+ */
+#define LAN91C96_ERCV_THRESHOLD (0x1FU << 0)
+#define LAN91C96_ERCV_RCV_DISCRD (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * PCMCIA Configuration Registers
+ ****************************************************************************
+ */
+#define LAN91C96_ECOR 0x8000 /* Ethernet Configuration Register */
+#define LAN91C96_ECSR 0x8002 /* Ethernet Configuration and Status */
+
+/*
+ ****************************************************************************
+ * PCMCIA Ethernet Configuration Option Register (ECOR)
+ ****************************************************************************
+ */
+#define LAN91C96_ECOR_ENABLE (0x1U << 0)
+#define LAN91C96_ECOR_WR_ATTRIB (0x1U << 2)
+#define LAN91C96_ECOR_LEVEL_REQ (0x1U << 6)
+#define LAN91C96_ECOR_SRESET (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * PCMCIA Ethernet Configuration and Status Register (ECSR)
+ ****************************************************************************
+ */
+#define LAN91C96_ECSR_INTR (0x1U << 1)
+#define LAN91C96_ECSR_PWRDWN (0x1U << 2)
+#define LAN91C96_ECSR_IOIS8 (0x1U << 5)
+
+/*
+ ****************************************************************************
+ * Receive Frame Status Word - See page 38 of the LAN91C96 specification.
+ ****************************************************************************
+ */
+#define LAN91C96_TOO_SHORT (0x1U << 10)
+#define LAN91C96_TOO_LONG (0x1U << 11)
+#define LAN91C96_ODD_FRM (0x1U << 12)
+#define LAN91C96_BAD_CRC (0x1U << 13)
+#define LAN91C96_BROD_CAST (0x1U << 14)
+#define LAN91C96_ALGN_ERR (0x1U << 15)
+
+#define FRAME_FILTER (LAN91C96_TOO_SHORT | LAN91C96_TOO_LONG | LAN91C96_BAD_CRC | LAN91C96_ALGN_ERR)
+
+/*
+ ****************************************************************************
+ * Default MAC Address
+ ****************************************************************************
+ */
+#define MAC_DEF_HI 0x0800
+#define MAC_DEF_MED 0x3333
+#define MAC_DEF_LO 0x0100
+
+/*
+ ****************************************************************************
+ * Default I/O Signature - 0x33
+ ****************************************************************************
+ */
+#define LAN91C96_LOW_SIGNATURE (0x33U << 0)
+#define LAN91C96_HIGH_SIGNATURE (0x33U << 8)
+#define LAN91C96_SIGNATURE (LAN91C96_HIGH_SIGNATURE | LAN91C96_LOW_SIGNATURE)
+
+#define LAN91C96_MAX_PAGES 6 /* Maximum number of 256 pages. */
+#define ETHERNET_MAX_LENGTH 1514
+
+
+/*-------------------------------------------------------------------------
+ * I define some macros to make it easier to do somewhat common
+ * or slightly complicated, repeated tasks.
+ *-------------------------------------------------------------------------
+ */
+
+/* select a register bank, 0 to 3 */
+
+#define SMC_SELECT_BANK(x) { SMC_outw( x, LAN91C96_BANK_SELECT ); }
+
+/* this enables an interrupt in the interrupt mask register */
+#define SMC_ENABLE_INT(x) {\
+ unsigned char mask;\
+ SMC_SELECT_BANK(2);\
+ mask = SMC_inb( LAN91C96_INT_MASK );\
+ mask |= (x);\
+ SMC_outb( mask, LAN91C96_INT_MASK ); \
+}
+
+/* this disables an interrupt from the interrupt mask register */
+
+#define SMC_DISABLE_INT(x) {\
+ unsigned char mask;\
+ SMC_SELECT_BANK(2);\
+ mask = SMC_inb( LAN91C96_INT_MASK );\
+ mask &= ~(x);\
+ SMC_outb( mask, LAN91C96_INT_MASK ); \
+}
+
+/*----------------------------------------------------------------------
+ * Define the interrupts that I want to receive from the card
+ *
+ * I want:
+ * LAN91C96_IST_EPH_INT, for nasty errors
+ * LAN91C96_IST_RCV_INT, for happy received packets
+ * LAN91C96_IST_RX_OVRN_INT, because I have to kick the receiver
+ *-------------------------------------------------------------------------
+ */
+#define SMC_INTERRUPT_MASK (LAN91C96_IST_EPH_INT | LAN91C96_IST_RX_OVRN_INT | LAN91C96_IST_RCV_INT)
+
+#endif /* _LAN91C96_H_ */
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
new file mode 100644
index 0000000..95cdc49
--- /dev/null
+++ b/drivers/net/macb.c
@@ -0,0 +1,587 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <common.h>
+
+#if defined(CONFIG_MACB) \
+ && (defined(CONFIG_CMD_NET) || defined(CONFIG_CMD_MII))
+
+/*
+ * The u-boot networking stack is a little weird. It seems like the
+ * networking core allocates receive buffers up front without any
+ * regard to the hardware that's supposed to actually receive those
+ * packets.
+ *
+ * The MACB receives packets into 128-byte receive buffers, so the
+ * buffers allocated by the core isn't very practical to use. We'll
+ * allocate our own, but we need one such buffer in case a packet
+ * wraps around the DMA ring so that we have to copy it.
+ *
+ * Therefore, define CFG_RX_ETH_BUFFER to 1 in the board-specific
+ * configuration header. This way, the core allocates one RX buffer
+ * and one TX buffer, each of which can hold a ethernet packet of
+ * maximum size.
+ *
+ * For some reason, the networking core unconditionally specifies a
+ * 32-byte packet "alignment" (which really should be called
+ * "padding"). MACB shouldn't need that, but we'll refrain from any
+ * core modifications here...
+ */
+
+#include <net.h>
+#include <malloc.h>
+
+#include <linux/mii.h>
+#include <asm/io.h>
+#include <asm/dma-mapping.h>
+#include <asm/arch/clk.h>
+
+#include "macb.h"
+
+#define barrier() asm volatile("" ::: "memory")
+
+#define CFG_MACB_RX_BUFFER_SIZE 4096
+#define CFG_MACB_RX_RING_SIZE (CFG_MACB_RX_BUFFER_SIZE / 128)
+#define CFG_MACB_TX_RING_SIZE 16
+#define CFG_MACB_TX_TIMEOUT 1000
+#define CFG_MACB_AUTONEG_TIMEOUT 5000000
+
+struct macb_dma_desc {
+ u32 addr;
+ u32 ctrl;
+};
+
+#define RXADDR_USED 0x00000001
+#define RXADDR_WRAP 0x00000002
+
+#define RXBUF_FRMLEN_MASK 0x00000fff
+#define RXBUF_FRAME_START 0x00004000
+#define RXBUF_FRAME_END 0x00008000
+#define RXBUF_TYPEID_MATCH 0x00400000
+#define RXBUF_ADDR4_MATCH 0x00800000
+#define RXBUF_ADDR3_MATCH 0x01000000
+#define RXBUF_ADDR2_MATCH 0x02000000
+#define RXBUF_ADDR1_MATCH 0x04000000
+#define RXBUF_BROADCAST 0x80000000
+
+#define TXBUF_FRMLEN_MASK 0x000007ff
+#define TXBUF_FRAME_END 0x00008000
+#define TXBUF_NOCRC 0x00010000
+#define TXBUF_EXHAUSTED 0x08000000
+#define TXBUF_UNDERRUN 0x10000000
+#define TXBUF_MAXRETRY 0x20000000
+#define TXBUF_WRAP 0x40000000
+#define TXBUF_USED 0x80000000
+
+struct macb_device {
+ void *regs;
+
+ unsigned int rx_tail;
+ unsigned int tx_head;
+ unsigned int tx_tail;
+
+ void *rx_buffer;
+ void *tx_buffer;
+ struct macb_dma_desc *rx_ring;
+ struct macb_dma_desc *tx_ring;
+
+ unsigned long rx_buffer_dma;
+ unsigned long rx_ring_dma;
+ unsigned long tx_ring_dma;
+
+ const struct device *dev;
+ struct eth_device netdev;
+ unsigned short phy_addr;
+};
+#define to_macb(_nd) container_of(_nd, struct macb_device, netdev)
+
+static void macb_mdio_write(struct macb_device *macb, u8 reg, u16 value)
+{
+ unsigned long netctl;
+ unsigned long netstat;
+ unsigned long frame;
+
+ netctl = macb_readl(macb, NCR);
+ netctl |= MACB_BIT(MPE);
+ macb_writel(macb, NCR, netctl);
+
+ frame = (MACB_BF(SOF, 1)
+ | MACB_BF(RW, 1)
+ | MACB_BF(PHYA, macb->phy_addr)
+ | MACB_BF(REGA, reg)
+ | MACB_BF(CODE, 2)
+ | MACB_BF(DATA, value));
+ macb_writel(macb, MAN, frame);
+
+ do {
+ netstat = macb_readl(macb, NSR);
+ } while (!(netstat & MACB_BIT(IDLE)));
+
+ netctl = macb_readl(macb, NCR);
+ netctl &= ~MACB_BIT(MPE);
+ macb_writel(macb, NCR, netctl);
+}
+
+static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
+{
+ unsigned long netctl;
+ unsigned long netstat;
+ unsigned long frame;
+
+ netctl = macb_readl(macb, NCR);
+ netctl |= MACB_BIT(MPE);
+ macb_writel(macb, NCR, netctl);
+
+ frame = (MACB_BF(SOF, 1)
+ | MACB_BF(RW, 2)
+ | MACB_BF(PHYA, macb->phy_addr)
+ | MACB_BF(REGA, reg)
+ | MACB_BF(CODE, 2));
+ macb_writel(macb, MAN, frame);
+
+ do {
+ netstat = macb_readl(macb, NSR);
+ } while (!(netstat & MACB_BIT(IDLE)));
+
+ frame = macb_readl(macb, MAN);
+
+ netctl = macb_readl(macb, NCR);
+ netctl &= ~MACB_BIT(MPE);
+ macb_writel(macb, NCR, netctl);
+
+ return MACB_BFEXT(DATA, frame);
+}
+
+#if defined(CONFIG_CMD_NET)
+
+static int macb_send(struct eth_device *netdev, volatile void *packet,
+ int length)
+{
+ struct macb_device *macb = to_macb(netdev);
+ unsigned long paddr, ctrl;
+ unsigned int tx_head = macb->tx_head;
+ int i;
+
+ paddr = dma_map_single(packet, length, DMA_TO_DEVICE);
+
+ ctrl = length & TXBUF_FRMLEN_MASK;
+ ctrl |= TXBUF_FRAME_END;
+ if (tx_head == (CFG_MACB_TX_RING_SIZE - 1)) {
+ ctrl |= TXBUF_WRAP;
+ macb->tx_head = 0;
+ } else
+ macb->tx_head++;
+
+ macb->tx_ring[tx_head].ctrl = ctrl;
+ macb->tx_ring[tx_head].addr = paddr;
+ barrier();
+ macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));
+
+ /*
+ * I guess this is necessary because the networking core may
+ * re-use the transmit buffer as soon as we return...
+ */
+ for (i = 0; i <= CFG_MACB_TX_TIMEOUT; i++) {
+ barrier();
+ ctrl = macb->tx_ring[tx_head].ctrl;
+ if (ctrl & TXBUF_USED)
+ break;
+ udelay(1);
+ }
+
+ dma_unmap_single(packet, length, paddr);
+
+ if (i <= CFG_MACB_TX_TIMEOUT) {
+ if (ctrl & TXBUF_UNDERRUN)
+ printf("%s: TX underrun\n", netdev->name);
+ if (ctrl & TXBUF_EXHAUSTED)
+ printf("%s: TX buffers exhausted in mid frame\n",
+ netdev->name);
+ } else {
+ printf("%s: TX timeout\n", netdev->name);
+ }
+
+ /* No one cares anyway */
+ return 0;
+}
+
+static void reclaim_rx_buffers(struct macb_device *macb,
+ unsigned int new_tail)
+{
+ unsigned int i;
+
+ i = macb->rx_tail;
+ while (i > new_tail) {
+ macb->rx_ring[i].addr &= ~RXADDR_USED;
+ i++;
+ if (i > CFG_MACB_RX_RING_SIZE)
+ i = 0;
+ }
+
+ while (i < new_tail) {
+ macb->rx_ring[i].addr &= ~RXADDR_USED;
+ i++;
+ }
+
+ barrier();
+ macb->rx_tail = new_tail;
+}
+
+static int macb_recv(struct eth_device *netdev)
+{
+ struct macb_device *macb = to_macb(netdev);
+ unsigned int rx_tail = macb->rx_tail;
+ void *buffer;
+ int length;
+ int wrapped = 0;
+ u32 status;
+
+ for (;;) {
+ if (!(macb->rx_ring[rx_tail].addr & RXADDR_USED))
+ return -1;
+
+ status = macb->rx_ring[rx_tail].ctrl;
+ if (status & RXBUF_FRAME_START) {
+ if (rx_tail != macb->rx_tail)
+ reclaim_rx_buffers(macb, rx_tail);
+ wrapped = 0;
+ }
+
+ if (status & RXBUF_FRAME_END) {
+ buffer = macb->rx_buffer + 128 * macb->rx_tail;
+ length = status & RXBUF_FRMLEN_MASK;
+ if (wrapped) {
+ unsigned int headlen, taillen;
+
+ headlen = 128 * (CFG_MACB_RX_RING_SIZE
+ - macb->rx_tail);
+ taillen = length - headlen;
+ memcpy((void *)NetRxPackets[0],
+ buffer, headlen);
+ memcpy((void *)NetRxPackets[0] + headlen,
+ macb->rx_buffer, taillen);
+ buffer = (void *)NetRxPackets[0];
+ }
+
+ NetReceive(buffer, length);
+ if (++rx_tail >= CFG_MACB_RX_RING_SIZE)
+ rx_tail = 0;
+ reclaim_rx_buffers(macb, rx_tail);
+ } else {
+ if (++rx_tail >= CFG_MACB_RX_RING_SIZE) {
+ wrapped = 1;
+ rx_tail = 0;
+ }
+ }
+ barrier();
+ }
+
+ return 0;
+}
+
+static void macb_phy_reset(struct macb_device *macb)
+{
+ struct eth_device *netdev = &macb->netdev;
+ int i;
+ u16 status, adv;
+
+ adv = ADVERTISE_CSMA | ADVERTISE_ALL;
+ macb_mdio_write(macb, MII_ADVERTISE, adv);
+ printf("%s: Starting autonegotiation...\n", netdev->name);
+ macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
+ | BMCR_ANRESTART));
+
+ for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) {
+ status = macb_mdio_read(macb, MII_BMSR);
+ if (status & BMSR_ANEGCOMPLETE)
+ break;
+ udelay(100);
+ }
+
+ if (status & BMSR_ANEGCOMPLETE)
+ printf("%s: Autonegotiation complete\n", netdev->name);
+ else
+ printf("%s: Autonegotiation timed out (status=0x%04x)\n",
+ netdev->name, status);
+}
+
+static int macb_phy_init(struct macb_device *macb)
+{
+ struct eth_device *netdev = &macb->netdev;
+ u32 ncfgr;
+ u16 phy_id, status, adv, lpa;
+ int media, speed, duplex;
+ int i;
+
+ /* Check if the PHY is up to snuff... */
+ phy_id = macb_mdio_read(macb, MII_PHYSID1);
+ if (phy_id == 0xffff) {
+ printf("%s: No PHY present\n", netdev->name);
+ return 0;
+ }
+
+ status = macb_mdio_read(macb, MII_BMSR);
+ if (!(status & BMSR_LSTATUS)) {
+ /* Try to re-negotiate if we don't have link already. */
+ macb_phy_reset(macb);
+
+ for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) {
+ status = macb_mdio_read(macb, MII_BMSR);
+ if (status & BMSR_LSTATUS)
+ break;
+ udelay(100);
+ }
+ }
+
+ if (!(status & BMSR_LSTATUS)) {
+ printf("%s: link down (status: 0x%04x)\n",
+ netdev->name, status);
+ return 0;
+ } else {
+ adv = macb_mdio_read(macb, MII_ADVERTISE);
+ lpa = macb_mdio_read(macb, MII_LPA);
+ media = mii_nway_result(lpa & adv);
+ speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
+ ? 1 : 0);
+ duplex = (media & ADVERTISE_FULL) ? 1 : 0;
+ printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
+ netdev->name,
+ speed ? "100" : "10",
+ duplex ? "full" : "half",
+ lpa);
+
+ ncfgr = macb_readl(macb, NCFGR);
+ ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
+ if (speed)
+ ncfgr |= MACB_BIT(SPD);
+ if (duplex)
+ ncfgr |= MACB_BIT(FD);
+ macb_writel(macb, NCFGR, ncfgr);
+ return 1;
+ }
+}
+
+static int macb_init(struct eth_device *netdev, bd_t *bd)
+{
+ struct macb_device *macb = to_macb(netdev);
+ unsigned long paddr;
+ u32 hwaddr_bottom;
+ u16 hwaddr_top;
+ int i;
+
+ /*
+ * macb_halt should have been called at some point before now,
+ * so we'll assume the controller is idle.
+ */
+
+ /* initialize DMA descriptors */
+ paddr = macb->rx_buffer_dma;
+ for (i = 0; i < CFG_MACB_RX_RING_SIZE; i++) {
+ if (i == (CFG_MACB_RX_RING_SIZE - 1))
+ paddr |= RXADDR_WRAP;
+ macb->rx_ring[i].addr = paddr;
+ macb->rx_ring[i].ctrl = 0;
+ paddr += 128;
+ }
+ for (i = 0; i < CFG_MACB_TX_RING_SIZE; i++) {
+ macb->tx_ring[i].addr = 0;
+ if (i == (CFG_MACB_TX_RING_SIZE - 1))
+ macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
+ else
+ macb->tx_ring[i].ctrl = TXBUF_USED;
+ }
+ macb->rx_tail = macb->tx_head = macb->tx_tail = 0;
+
+ macb_writel(macb, RBQP, macb->rx_ring_dma);
+ macb_writel(macb, TBQP, macb->tx_ring_dma);
+
+ /* set hardware address */
+ hwaddr_bottom = cpu_to_le32(*((u32 *)netdev->enetaddr));
+ macb_writel(macb, SA1B, hwaddr_bottom);
+ hwaddr_top = cpu_to_le16(*((u16 *)(netdev->enetaddr + 4)));
+ macb_writel(macb, SA1T, hwaddr_top);
+
+ /* choose RMII or MII mode. This depends on the board */
+#ifdef CONFIG_RMII
+ macb_writel(macb, USRIO, 0);
+#else
+ macb_writel(macb, USRIO, MACB_BIT(MII));
+#endif
+
+ if (!macb_phy_init(macb))
+ return 0;
+
+ /* Enable TX and RX */
+ macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE));
+
+ return 1;
+}
+
+static void macb_halt(struct eth_device *netdev)
+{
+ struct macb_device *macb = to_macb(netdev);
+ u32 ncr, tsr;
+
+ /* Halt the controller and wait for any ongoing transmission to end. */
+ ncr = macb_readl(macb, NCR);
+ ncr |= MACB_BIT(THALT);
+ macb_writel(macb, NCR, ncr);
+
+ do {
+ tsr = macb_readl(macb, TSR);
+ } while (tsr & MACB_BIT(TGO));
+
+ /* Disable TX and RX, and clear statistics */
+ macb_writel(macb, NCR, MACB_BIT(CLRSTAT));
+}
+
+int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
+{
+ struct macb_device *macb;
+ struct eth_device *netdev;
+ unsigned long macb_hz;
+ u32 ncfgr;
+
+ macb = malloc(sizeof(struct macb_device));
+ if (!macb) {
+ printf("Error: Failed to allocate memory for MACB%d\n", id);
+ return -1;
+ }
+ memset(macb, 0, sizeof(struct macb_device));
+
+ netdev = &macb->netdev;
+
+ macb->rx_buffer = dma_alloc_coherent(CFG_MACB_RX_BUFFER_SIZE,
+ &macb->rx_buffer_dma);
+ macb->rx_ring = dma_alloc_coherent(CFG_MACB_RX_RING_SIZE
+ * sizeof(struct macb_dma_desc),
+ &macb->rx_ring_dma);
+ macb->tx_ring = dma_alloc_coherent(CFG_MACB_TX_RING_SIZE
+ * sizeof(struct macb_dma_desc),
+ &macb->tx_ring_dma);
+
+ macb->regs = regs;
+ macb->phy_addr = phy_addr;
+
+ sprintf(netdev->name, "macb%d", id);
+ netdev->init = macb_init;
+ netdev->halt = macb_halt;
+ netdev->send = macb_send;
+ netdev->recv = macb_recv;
+
+ /*
+ * Do some basic initialization so that we at least can talk
+ * to the PHY
+ */
+ macb_hz = get_macb_pclk_rate(id);
+ if (macb_hz < 20000000)
+ ncfgr = MACB_BF(CLK, MACB_CLK_DIV8);
+ else if (macb_hz < 40000000)
+ ncfgr = MACB_BF(CLK, MACB_CLK_DIV16);
+ else if (macb_hz < 80000000)
+ ncfgr = MACB_BF(CLK, MACB_CLK_DIV32);
+ else
+ ncfgr = MACB_BF(CLK, MACB_CLK_DIV64);
+
+ macb_writel(macb, NCFGR, ncfgr);
+
+ eth_register(netdev);
+
+ return 0;
+}
+
+#endif
+
+#if defined(CONFIG_CMD_MII)
+
+int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
+{
+ unsigned long netctl;
+ unsigned long netstat;
+ unsigned long frame;
+ int iflag;
+
+ iflag = disable_interrupts();
+ netctl = macb_readl(&macb, EMACB_NCR);
+ netctl |= MACB_BIT(MPE);
+ macb_writel(&macb, EMACB_NCR, netctl);
+ if (iflag)
+ enable_interrupts();
+
+ frame = (MACB_BF(SOF, 1)
+ | MACB_BF(RW, 2)
+ | MACB_BF(PHYA, addr)
+ | MACB_BF(REGA, reg)
+ | MACB_BF(CODE, 2));
+ macb_writel(&macb, EMACB_MAN, frame);
+
+ do {
+ netstat = macb_readl(&macb, EMACB_NSR);
+ } while (!(netstat & MACB_BIT(IDLE)));
+
+ frame = macb_readl(&macb, EMACB_MAN);
+ *value = MACB_BFEXT(DATA, frame);
+
+ iflag = disable_interrupts();
+ netctl = macb_readl(&macb, EMACB_NCR);
+ netctl &= ~MACB_BIT(MPE);
+ macb_writel(&macb, EMACB_NCR, netctl);
+ if (iflag)
+ enable_interrupts();
+
+ return 0;
+}
+
+int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
+{
+ unsigned long netctl;
+ unsigned long netstat;
+ unsigned long frame;
+ int iflag;
+
+ iflag = disable_interrupts();
+ netctl = macb_readl(&macb, EMACB_NCR);
+ netctl |= MACB_BIT(MPE);
+ macb_writel(&macb, EMACB_NCR, netctl);
+ if (iflag)
+ enable_interrupts();
+
+ frame = (MACB_BF(SOF, 1)
+ | MACB_BF(RW, 1)
+ | MACB_BF(PHYA, addr)
+ | MACB_BF(REGA, reg)
+ | MACB_BF(CODE, 2)
+ | MACB_BF(DATA, value));
+ macb_writel(&macb, EMACB_MAN, frame);
+
+ do {
+ netstat = macb_readl(&macb, EMACB_NSR);
+ } while (!(netstat & MACB_BIT(IDLE)));
+
+ iflag = disable_interrupts();
+ netctl = macb_readl(&macb, EMACB_NCR);
+ netctl &= ~MACB_BIT(MPE);
+ macb_writel(&macb, EMACB_NCR, netctl);
+ if (iflag)
+ enable_interrupts();
+
+ return 0;
+}
+
+#endif
+
+#endif /* CONFIG_MACB */
diff --git a/drivers/net/macb.h b/drivers/net/macb.h
new file mode 100644
index 0000000..c778e4e
--- /dev/null
+++ b/drivers/net/macb.h
@@ -0,0 +1,269 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __DRIVERS_MACB_H__
+#define __DRIVERS_MACB_H__
+
+/* MACB register offsets */
+#define MACB_NCR 0x0000
+#define MACB_NCFGR 0x0004
+#define MACB_NSR 0x0008
+#define MACB_TSR 0x0014
+#define MACB_RBQP 0x0018
+#define MACB_TBQP 0x001c
+#define MACB_RSR 0x0020
+#define MACB_ISR 0x0024
+#define MACB_IER 0x0028
+#define MACB_IDR 0x002c
+#define MACB_IMR 0x0030
+#define MACB_MAN 0x0034
+#define MACB_PTR 0x0038
+#define MACB_PFR 0x003c
+#define MACB_FTO 0x0040
+#define MACB_SCF 0x0044
+#define MACB_MCF 0x0048
+#define MACB_FRO 0x004c
+#define MACB_FCSE 0x0050
+#define MACB_ALE 0x0054
+#define MACB_DTF 0x0058
+#define MACB_LCOL 0x005c
+#define MACB_EXCOL 0x0060
+#define MACB_TUND 0x0064
+#define MACB_CSE 0x0068
+#define MACB_RRE 0x006c
+#define MACB_ROVR 0x0070
+#define MACB_RSE 0x0074
+#define MACB_ELE 0x0078
+#define MACB_RJA 0x007c
+#define MACB_USF 0x0080
+#define MACB_STE 0x0084
+#define MACB_RLE 0x0088
+#define MACB_TPF 0x008c
+#define MACB_HRB 0x0090
+#define MACB_HRT 0x0094
+#define MACB_SA1B 0x0098
+#define MACB_SA1T 0x009c
+#define MACB_SA2B 0x00a0
+#define MACB_SA2T 0x00a4
+#define MACB_SA3B 0x00a8
+#define MACB_SA3T 0x00ac
+#define MACB_SA4B 0x00b0
+#define MACB_SA4T 0x00b4
+#define MACB_TID 0x00b8
+#define MACB_TPQ 0x00bc
+#define MACB_USRIO 0x00c0
+#define MACB_WOL 0x00c4
+
+/* Bitfields in NCR */
+#define MACB_LB_OFFSET 0
+#define MACB_LB_SIZE 1
+#define MACB_LLB_OFFSET 1
+#define MACB_LLB_SIZE 1
+#define MACB_RE_OFFSET 2
+#define MACB_RE_SIZE 1
+#define MACB_TE_OFFSET 3
+#define MACB_TE_SIZE 1
+#define MACB_MPE_OFFSET 4
+#define MACB_MPE_SIZE 1
+#define MACB_CLRSTAT_OFFSET 5
+#define MACB_CLRSTAT_SIZE 1
+#define MACB_INCSTAT_OFFSET 6
+#define MACB_INCSTAT_SIZE 1
+#define MACB_WESTAT_OFFSET 7
+#define MACB_WESTAT_SIZE 1
+#define MACB_BP_OFFSET 8
+#define MACB_BP_SIZE 1
+#define MACB_TSTART_OFFSET 9
+#define MACB_TSTART_SIZE 1
+#define MACB_THALT_OFFSET 10
+#define MACB_THALT_SIZE 1
+#define MACB_NCR_TPF_OFFSET 11
+#define MACB_NCR_TPF_SIZE 1
+#define MACB_TZQ_OFFSET 12
+#define MACB_TZQ_SIZE 1
+
+/* Bitfields in NCFGR */
+#define MACB_SPD_OFFSET 0
+#define MACB_SPD_SIZE 1
+#define MACB_FD_OFFSET 1
+#define MACB_FD_SIZE 1
+#define MACB_BIT_RATE_OFFSET 2
+#define MACB_BIT_RATE_SIZE 1
+#define MACB_JFRAME_OFFSET 3
+#define MACB_JFRAME_SIZE 1
+#define MACB_CAF_OFFSET 4
+#define MACB_CAF_SIZE 1
+#define MACB_NBC_OFFSET 5
+#define MACB_NBC_SIZE 1
+#define MACB_NCFGR_MTI_OFFSET 6
+#define MACB_NCFGR_MTI_SIZE 1
+#define MACB_UNI_OFFSET 7
+#define MACB_UNI_SIZE 1
+#define MACB_BIG_OFFSET 8
+#define MACB_BIG_SIZE 1
+#define MACB_EAE_OFFSET 9
+#define MACB_EAE_SIZE 1
+#define MACB_CLK_OFFSET 10
+#define MACB_CLK_SIZE 2
+#define MACB_RTY_OFFSET 12
+#define MACB_RTY_SIZE 1
+#define MACB_PAE_OFFSET 13
+#define MACB_PAE_SIZE 1
+#define MACB_RBOF_OFFSET 14
+#define MACB_RBOF_SIZE 2
+#define MACB_RLCE_OFFSET 16
+#define MACB_RLCE_SIZE 1
+#define MACB_DRFCS_OFFSET 17
+#define MACB_DRFCS_SIZE 1
+#define MACB_EFRHD_OFFSET 18
+#define MACB_EFRHD_SIZE 1
+#define MACB_IRXFCS_OFFSET 19
+#define MACB_IRXFCS_SIZE 1
+
+/* Bitfields in NSR */
+#define MACB_NSR_LINK_OFFSET 0
+#define MACB_NSR_LINK_SIZE 1
+#define MACB_MDIO_OFFSET 1
+#define MACB_MDIO_SIZE 1
+#define MACB_IDLE_OFFSET 2
+#define MACB_IDLE_SIZE 1
+
+/* Bitfields in TSR */
+#define MACB_UBR_OFFSET 0
+#define MACB_UBR_SIZE 1
+#define MACB_COL_OFFSET 1
+#define MACB_COL_SIZE 1
+#define MACB_TSR_RLE_OFFSET 2
+#define MACB_TSR_RLE_SIZE 1
+#define MACB_TGO_OFFSET 3
+#define MACB_TGO_SIZE 1
+#define MACB_BEX_OFFSET 4
+#define MACB_BEX_SIZE 1
+#define MACB_COMP_OFFSET 5
+#define MACB_COMP_SIZE 1
+#define MACB_UND_OFFSET 6
+#define MACB_UND_SIZE 1
+
+/* Bitfields in RSR */
+#define MACB_BNA_OFFSET 0
+#define MACB_BNA_SIZE 1
+#define MACB_REC_OFFSET 1
+#define MACB_REC_SIZE 1
+#define MACB_OVR_OFFSET 2
+#define MACB_OVR_SIZE 1
+
+/* Bitfields in ISR/IER/IDR/IMR */
+#define MACB_MFD_OFFSET 0
+#define MACB_MFD_SIZE 1
+#define MACB_RCOMP_OFFSET 1
+#define MACB_RCOMP_SIZE 1
+#define MACB_RXUBR_OFFSET 2
+#define MACB_RXUBR_SIZE 1
+#define MACB_TXUBR_OFFSET 3
+#define MACB_TXUBR_SIZE 1
+#define MACB_ISR_TUND_OFFSET 4
+#define MACB_ISR_TUND_SIZE 1
+#define MACB_ISR_RLE_OFFSET 5
+#define MACB_ISR_RLE_SIZE 1
+#define MACB_TXERR_OFFSET 6
+#define MACB_TXERR_SIZE 1
+#define MACB_TCOMP_OFFSET 7
+#define MACB_TCOMP_SIZE 1
+#define MACB_ISR_LINK_OFFSET 9
+#define MACB_ISR_LINK_SIZE 1
+#define MACB_ISR_ROVR_OFFSET 10
+#define MACB_ISR_ROVR_SIZE 1
+#define MACB_HRESP_OFFSET 11
+#define MACB_HRESP_SIZE 1
+#define MACB_PFR_OFFSET 12
+#define MACB_PFR_SIZE 1
+#define MACB_PTZ_OFFSET 13
+#define MACB_PTZ_SIZE 1
+
+/* Bitfields in MAN */
+#define MACB_DATA_OFFSET 0
+#define MACB_DATA_SIZE 16
+#define MACB_CODE_OFFSET 16
+#define MACB_CODE_SIZE 2
+#define MACB_REGA_OFFSET 18
+#define MACB_REGA_SIZE 5
+#define MACB_PHYA_OFFSET 23
+#define MACB_PHYA_SIZE 5
+#define MACB_RW_OFFSET 28
+#define MACB_RW_SIZE 2
+#define MACB_SOF_OFFSET 30
+#define MACB_SOF_SIZE 2
+
+/* Bitfields in USRIO */
+#define MACB_MII_OFFSET 0
+#define MACB_MII_SIZE 1
+#define MACB_EAM_OFFSET 1
+#define MACB_EAM_SIZE 1
+#define MACB_TX_PAUSE_OFFSET 2
+#define MACB_TX_PAUSE_SIZE 1
+#define MACB_TX_PAUSE_ZERO_OFFSET 3
+#define MACB_TX_PAUSE_ZERO_SIZE 1
+
+/* Bitfields in WOL */
+#define MACB_IP_OFFSET 0
+#define MACB_IP_SIZE 16
+#define MACB_MAG_OFFSET 16
+#define MACB_MAG_SIZE 1
+#define MACB_ARP_OFFSET 17
+#define MACB_ARP_SIZE 1
+#define MACB_SA1_OFFSET 18
+#define MACB_SA1_SIZE 1
+#define MACB_WOL_MTI_OFFSET 19
+#define MACB_WOL_MTI_SIZE 1
+
+/* Constants for CLK */
+#define MACB_CLK_DIV8 0
+#define MACB_CLK_DIV16 1
+#define MACB_CLK_DIV32 2
+#define MACB_CLK_DIV64 3
+
+/* Constants for MAN register */
+#define MACB_MAN_SOF 1
+#define MACB_MAN_WRITE 1
+#define MACB_MAN_READ 2
+#define MACB_MAN_CODE 2
+
+/* Bit manipulation macros */
+#define MACB_BIT(name) \
+ (1 << MACB_##name##_OFFSET)
+#define MACB_BF(name,value) \
+ (((value) & ((1 << MACB_##name##_SIZE) - 1)) \
+ << MACB_##name##_OFFSET)
+#define MACB_BFEXT(name,value)\
+ (((value) >> MACB_##name##_OFFSET) \
+ & ((1 << MACB_##name##_SIZE) - 1))
+#define MACB_BFINS(name,value,old) \
+ (((old) & ~(((1 << MACB_##name##_SIZE) - 1) \
+ << MACB_##name##_OFFSET)) \
+ | MACB_BF(name,value))
+
+/* Register access macros */
+#define macb_readl(port,reg) \
+ readl((port)->regs + MACB_##reg)
+#define macb_writel(port,reg,value) \
+ writel((value), (port)->regs + MACB_##reg)
+
+#endif /* __DRIVERS_MACB_H__ */
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
new file mode 100644
index 0000000..075d6c5
--- /dev/null
+++ b/drivers/net/natsemi.c
@@ -0,0 +1,882 @@
+/*
+ natsemi.c: A U-Boot driver for the NatSemi DP8381x series.
+ Author: Mark A. Rakes (mark_rakes@vivato.net)
+
+ Adapted from an Etherboot driver written by:
+
+ Copyright (C) 2001 Entity Cyber, Inc.
+
+ This development of this Etherboot driver was funded by
+
+ Sicom Systems: http://www.sicompos.com/
+
+ Author: Marty Connor (mdc@thinguin.org)
+ Adapted from a Linux driver which was written by Donald Becker
+
+ This software may be used and distributed according to the terms
+ of the GNU Public License (GPL), incorporated herein by reference.
+
+ Original Copyright Notice:
+
+ Written/copyright 1999-2001 by Donald Becker.
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice. This file is not
+ a complete program and may only be used when the entire operating
+ system is licensed under the GPL. License for under other terms may be
+ available. Contact the original author for details.
+
+ The original author may be reached as becker@scyld.com, or at
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ Support information and updates available at
+ http://www.scyld.com/network/netsemi.html
+
+ References:
+ http://www.scyld.com/expert/100mbps.html
+ http://www.scyld.com/expert/NWay.html
+ Datasheet is available from:
+ http://www.national.com/pf/DP/DP83815.html
+*/
+
+/* Revision History
+ * October 2002 mar 1.0
+ * Initial U-Boot Release. Tested with Netgear FA311 board
+ * and dp83815 chipset on custom board
+*/
+
+/* Includes */
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#if defined(CONFIG_CMD_NET) \
+ && defined(CONFIG_NET_MULTI) && defined(CONFIG_NATSEMI)
+
+/* defines */
+#define EEPROM_SIZE 0xb /*12 16-bit chunks, or 24 bytes*/
+
+#define DSIZE 0x00000FFF
+#define ETH_ALEN 6
+#define CRC_SIZE 4
+#define TOUT_LOOP 500000
+#define TX_BUF_SIZE 1536
+#define RX_BUF_SIZE 1536
+#define NUM_RX_DESC 4 /* Number of Rx descriptor registers. */
+
+/* Offsets to the device registers.
+ Unlike software-only systems, device drivers interact with complex hardware.
+ It's not useful to define symbolic names for every register bit in the
+ device. */
+enum register_offsets {
+ ChipCmd = 0x00,
+ ChipConfig = 0x04,
+ EECtrl = 0x08,
+ IntrMask = 0x14,
+ IntrEnable = 0x18,
+ TxRingPtr = 0x20,
+ TxConfig = 0x24,
+ RxRingPtr = 0x30,
+ RxConfig = 0x34,
+ ClkRun = 0x3C,
+ RxFilterAddr = 0x48,
+ RxFilterData = 0x4C,
+ SiliconRev = 0x58,
+ PCIPM = 0x44,
+ BasicControl = 0x80,
+ BasicStatus = 0x84,
+ /* These are from the spec, around page 78... on a separate table. */
+ PGSEL = 0xCC,
+ PMDCSR = 0xE4,
+ TSTDAT = 0xFC,
+ DSPCFG = 0xF4,
+ SDCFG = 0x8C
+};
+
+/* Bit in ChipCmd. */
+enum ChipCmdBits {
+ ChipReset = 0x100,
+ RxReset = 0x20,
+ TxReset = 0x10,
+ RxOff = 0x08,
+ RxOn = 0x04,
+ TxOff = 0x02,
+ TxOn = 0x01
+};
+
+enum ChipConfigBits {
+ LinkSts = 0x80000000,
+ HundSpeed = 0x40000000,
+ FullDuplex = 0x20000000,
+ TenPolarity = 0x10000000,
+ AnegDone = 0x08000000,
+ AnegEnBothBoth = 0x0000E000,
+ AnegDis100Full = 0x0000C000,
+ AnegEn100Both = 0x0000A000,
+ AnegDis100Half = 0x00008000,
+ AnegEnBothHalf = 0x00006000,
+ AnegDis10Full = 0x00004000,
+ AnegEn10Both = 0x00002000,
+ DuplexMask = 0x00008000,
+ SpeedMask = 0x00004000,
+ AnegMask = 0x00002000,
+ AnegDis10Half = 0x00000000,
+ ExtPhy = 0x00001000,
+ PhyRst = 0x00000400,
+ PhyDis = 0x00000200,
+ BootRomDisable = 0x00000004,
+ BEMode = 0x00000001,
+};
+
+enum TxConfig_bits {
+ TxDrthMask = 0x3f,
+ TxFlthMask = 0x3f00,
+ TxMxdmaMask = 0x700000,
+ TxMxdma_512 = 0x0,
+ TxMxdma_4 = 0x100000,
+ TxMxdma_8 = 0x200000,
+ TxMxdma_16 = 0x300000,
+ TxMxdma_32 = 0x400000,
+ TxMxdma_64 = 0x500000,
+ TxMxdma_128 = 0x600000,
+ TxMxdma_256 = 0x700000,
+ TxCollRetry = 0x800000,
+ TxAutoPad = 0x10000000,
+ TxMacLoop = 0x20000000,
+ TxHeartIgn = 0x40000000,
+ TxCarrierIgn = 0x80000000
+};
+
+enum RxConfig_bits {
+ RxDrthMask = 0x3e,
+ RxMxdmaMask = 0x700000,
+ RxMxdma_512 = 0x0,
+ RxMxdma_4 = 0x100000,
+ RxMxdma_8 = 0x200000,
+ RxMxdma_16 = 0x300000,
+ RxMxdma_32 = 0x400000,
+ RxMxdma_64 = 0x500000,
+ RxMxdma_128 = 0x600000,
+ RxMxdma_256 = 0x700000,
+ RxAcceptLong = 0x8000000,
+ RxAcceptTx = 0x10000000,
+ RxAcceptRunt = 0x40000000,
+ RxAcceptErr = 0x80000000
+};
+
+/* Bits in the RxMode register. */
+enum rx_mode_bits {
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0xC0000000,
+ AcceptMulticast = 0x00200000,
+ AcceptAllMulticast = 0x20000000,
+ AcceptAllPhys = 0x10000000,
+ AcceptMyPhys = 0x08000000
+};
+
+typedef struct _BufferDesc {
+ u32 link;
+ vu_long cmdsts;
+ u32 bufptr;
+ u32 software_use;
+} BufferDesc;
+
+/* Bits in network_desc.status */
+enum desc_status_bits {
+ DescOwn = 0x80000000, DescMore = 0x40000000, DescIntr = 0x20000000,
+ DescNoCRC = 0x10000000, DescPktOK = 0x08000000,
+ DescSizeMask = 0xfff,
+
+ DescTxAbort = 0x04000000, DescTxFIFO = 0x02000000,
+ DescTxCarrier = 0x01000000, DescTxDefer = 0x00800000,
+ DescTxExcDefer = 0x00400000, DescTxOOWCol = 0x00200000,
+ DescTxExcColl = 0x00100000, DescTxCollCount = 0x000f0000,
+
+ DescRxAbort = 0x04000000, DescRxOver = 0x02000000,
+ DescRxDest = 0x01800000, DescRxLong = 0x00400000,
+ DescRxRunt = 0x00200000, DescRxInvalid = 0x00100000,
+ DescRxCRC = 0x00080000, DescRxAlign = 0x00040000,
+ DescRxLoop = 0x00020000, DesRxColl = 0x00010000,
+};
+
+/* Globals */
+#ifdef NATSEMI_DEBUG
+static int natsemi_debug = 0; /* 1 verbose debugging, 0 normal */
+#endif
+static u32 SavedClkRun;
+static unsigned int cur_rx;
+static unsigned int advertising;
+static unsigned int rx_config;
+static unsigned int tx_config;
+
+/* Note: transmit and receive buffers and descriptors must be
+ longword aligned */
+static BufferDesc txd __attribute__ ((aligned(4)));
+static BufferDesc rxd[NUM_RX_DESC] __attribute__ ((aligned(4)));
+
+static unsigned char txb[TX_BUF_SIZE] __attribute__ ((aligned(4)));
+static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE]
+ __attribute__ ((aligned(4)));
+
+/* Function Prototypes */
+#if 0
+static void write_eeprom(struct eth_device *dev, long addr, int location,
+ short value);
+#endif
+static int read_eeprom(struct eth_device *dev, long addr, int location);
+static int mdio_read(struct eth_device *dev, int phy_id, int location);
+static int natsemi_init(struct eth_device *dev, bd_t * bis);
+static void natsemi_reset(struct eth_device *dev);
+static void natsemi_init_rxfilter(struct eth_device *dev);
+static void natsemi_init_txd(struct eth_device *dev);
+static void natsemi_init_rxd(struct eth_device *dev);
+static void natsemi_set_rx_mode(struct eth_device *dev);
+static void natsemi_check_duplex(struct eth_device *dev);
+static int natsemi_send(struct eth_device *dev, volatile void *packet,
+ int length);
+static int natsemi_poll(struct eth_device *dev);
+static void natsemi_disable(struct eth_device *dev);
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815},
+ {}
+};
+
+#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
+#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+
+static inline int
+INW(struct eth_device *dev, u_long addr)
+{
+ return le16_to_cpu(*(vu_short *) (addr + dev->iobase));
+}
+
+static int
+INL(struct eth_device *dev, u_long addr)
+{
+ return le32_to_cpu(*(vu_long *) (addr + dev->iobase));
+}
+
+static inline void
+OUTW(struct eth_device *dev, int command, u_long addr)
+{
+ *(vu_short *) ((addr + dev->iobase)) = cpu_to_le16(command);
+}
+
+static inline void
+OUTL(struct eth_device *dev, int command, u_long addr)
+{
+ *(vu_long *) ((addr + dev->iobase)) = cpu_to_le32(command);
+}
+
+/*
+ * Function: natsemi_initialize
+ *
+ * Description: Retrieves the MAC address of the card, and sets up some
+ * globals required by other routines, and initializes the NIC, making it
+ * ready to send and receive packets.
+ *
+ * Side effects:
+ * leaves the natsemi initialized, and ready to recieve packets.
+ *
+ * Returns: struct eth_device *: pointer to NIC data structure
+ */
+
+int
+natsemi_initialize(bd_t * bis)
+{
+ pci_dev_t devno;
+ int card_number = 0;
+ struct eth_device *dev;
+ u32 iobase, status, chip_config;
+ int i, idx = 0;
+ int prev_eedata;
+ u32 tmp;
+
+ while (1) {
+ /* Find PCI device(s) */
+ if ((devno = pci_find_devices(supported, idx++)) < 0) {
+ break;
+ }
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase);
+ iobase &= ~0x3; /* bit 1: unused and bit 0: I/O Space Indicator */
+
+ pci_write_config_dword(devno, PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+ /* Check if I/O accesses and Bus Mastering are enabled. */
+ pci_read_config_dword(devno, PCI_COMMAND, &status);
+ if (!(status & PCI_COMMAND_MEMORY)) {
+ printf("Error: Can not enable MEM access.\n");
+ continue;
+ } else if (!(status & PCI_COMMAND_MASTER)) {
+ printf("Error: Can not enable Bus Mastering.\n");
+ continue;
+ }
+
+ dev = (struct eth_device *) malloc(sizeof *dev);
+
+ sprintf(dev->name, "dp83815#%d", card_number);
+ dev->iobase = bus_to_phys(iobase);
+#ifdef NATSEMI_DEBUG
+ printf("natsemi: NatSemi ns8381[56] @ %#x\n", dev->iobase);
+#endif
+ dev->priv = (void *) devno;
+ dev->init = natsemi_init;
+ dev->halt = natsemi_disable;
+ dev->send = natsemi_send;
+ dev->recv = natsemi_poll;
+
+ eth_register(dev);
+
+ card_number++;
+
+ /* Set the latency timer for value. */
+ pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
+
+ udelay(10 * 1000);
+
+ /* natsemi has a non-standard PM control register
+ * in PCI config space. Some boards apparently need
+ * to be brought to D0 in this manner. */
+ pci_read_config_dword(devno, PCIPM, &tmp);
+ if (tmp & (0x03 | 0x100)) {
+ /* D0 state, disable PME assertion */
+ u32 newtmp = tmp & ~(0x03 | 0x100);
+ pci_write_config_dword(devno, PCIPM, newtmp);
+ }
+
+ printf("natsemi: EEPROM contents:\n");
+ for (i = 0; i <= EEPROM_SIZE; i++) {
+ short eedata = read_eeprom(dev, EECtrl, i);
+ printf(" %04hx", eedata);
+ }
+ printf("\n");
+
+ /* get MAC address */
+ prev_eedata = read_eeprom(dev, EECtrl, 6);
+ for (i = 0; i < 3; i++) {
+ int eedata = read_eeprom(dev, EECtrl, i + 7);
+ dev->enetaddr[i*2] = (eedata << 1) + (prev_eedata >> 15);
+ dev->enetaddr[i*2+1] = eedata >> 7;
+ prev_eedata = eedata;
+ }
+
+ /* Reset the chip to erase any previous misconfiguration. */
+ OUTL(dev, ChipReset, ChipCmd);
+
+ advertising = mdio_read(dev, 1, 4);
+ chip_config = INL(dev, ChipConfig);
+#ifdef NATSEMI_DEBUG
+ printf("%s: Transceiver status %#08X advertising %#08X\n",
+ dev->name, (int) INL(dev, BasicStatus), advertising);
+ printf("%s: Transceiver default autoneg. %s 10%s %s duplex.\n",
+ dev->name, chip_config & AnegMask ? "enabled, advertise" :
+ "disabled, force", chip_config & SpeedMask ? "0" : "",
+ chip_config & DuplexMask ? "full" : "half");
+#endif
+ chip_config |= AnegEnBothBoth;
+#ifdef NATSEMI_DEBUG
+ printf("%s: changed to autoneg. %s 10%s %s duplex.\n",
+ dev->name, chip_config & AnegMask ? "enabled, advertise" :
+ "disabled, force", chip_config & SpeedMask ? "0" : "",
+ chip_config & DuplexMask ? "full" : "half");
+#endif
+ /*write new autoneg bits, reset phy*/
+ OUTL(dev, (chip_config | PhyRst), ChipConfig);
+ /*un-reset phy*/
+ OUTL(dev, chip_config, ChipConfig);
+
+ /* Disable PME:
+ * The PME bit is initialized from the EEPROM contents.
+ * PCI cards probably have PME disabled, but motherboard
+ * implementations may have PME set to enable WakeOnLan.
+ * With PME set the chip will scan incoming packets but
+ * nothing will be written to memory. */
+ SavedClkRun = INL(dev, ClkRun);
+ OUTL(dev, SavedClkRun & ~0x100, ClkRun);
+ }
+ return card_number;
+}
+
+/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.
+ The EEPROM code is for common 93c06/46 EEPROMs w/ 6bit addresses. */
+
+/* Delay between EEPROM clock transitions.
+ No extra delay is needed with 33Mhz PCI, but future 66Mhz
+ access may need a delay. */
+#define eeprom_delay(ee_addr) INL(dev, ee_addr)
+
+enum EEPROM_Ctrl_Bits {
+ EE_ShiftClk = 0x04,
+ EE_DataIn = 0x01,
+ EE_ChipSelect = 0x08,
+ EE_DataOut = 0x02
+};
+
+#define EE_Write0 (EE_ChipSelect)
+#define EE_Write1 (EE_ChipSelect | EE_DataIn)
+/* The EEPROM commands include the alway-set leading bit. */
+enum EEPROM_Cmds {
+ EE_WrEnCmd = (4 << 6), EE_WriteCmd = (5 << 6),
+ EE_ReadCmd = (6 << 6), EE_EraseCmd = (7 << 6),
+};
+
+#if 0
+static void
+write_eeprom(struct eth_device *dev, long addr, int location, short value)
+{
+ int i;
+ int ee_addr = (typeof(ee_addr))addr;
+ short wren_cmd = EE_WrEnCmd | 0x30; /*wren is 100 + 11XXXX*/
+ short write_cmd = location | EE_WriteCmd;
+
+#ifdef NATSEMI_DEBUG
+ printf("write_eeprom: %08x, %04hx, %04hx\n",
+ dev->iobase + ee_addr, write_cmd, value);
+#endif
+ /* Shift the write enable command bits out. */
+ for (i = 9; i >= 0; i--) {
+ short cmdval = (wren_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+ OUTL(dev, cmdval, ee_addr);
+ eeprom_delay(ee_addr);
+ OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
+ eeprom_delay(ee_addr);
+ }
+
+ OUTL(dev, 0, ee_addr); /*bring chip select low*/
+ OUTL(dev, EE_ShiftClk, ee_addr);
+ eeprom_delay(ee_addr);
+
+ /* Shift the write command bits out. */
+ for (i = 9; i >= 0; i--) {
+ short cmdval = (write_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+ OUTL(dev, cmdval, ee_addr);
+ eeprom_delay(ee_addr);
+ OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
+ eeprom_delay(ee_addr);
+ }
+
+ for (i = 0; i < 16; i++) {
+ short cmdval = (value & (1 << i)) ? EE_Write1 : EE_Write0;
+ OUTL(dev, cmdval, ee_addr);
+ eeprom_delay(ee_addr);
+ OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
+ eeprom_delay(ee_addr);
+ }
+
+ OUTL(dev, 0, ee_addr); /*bring chip select low*/
+ OUTL(dev, EE_ShiftClk, ee_addr);
+ for (i = 0; i < 200000; i++) {
+ OUTL(dev, EE_Write0, ee_addr); /*poll for done*/
+ if (INL(dev, ee_addr) & EE_DataOut) {
+ break; /*finished*/
+ }
+ }
+ eeprom_delay(ee_addr);
+
+ /* Terminate the EEPROM access. */
+ OUTL(dev, EE_Write0, ee_addr);
+ OUTL(dev, 0, ee_addr);
+ return;
+}
+#endif
+
+static int
+read_eeprom(struct eth_device *dev, long addr, int location)
+{
+ int i;
+ int retval = 0;
+ int ee_addr = (typeof(ee_addr))addr;
+ int read_cmd = location | EE_ReadCmd;
+
+ OUTL(dev, EE_Write0, ee_addr);
+
+ /* Shift the read command bits out. */
+ for (i = 10; i >= 0; i--) {
+ short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+ OUTL(dev, dataval, ee_addr);
+ eeprom_delay(ee_addr);
+ OUTL(dev, dataval | EE_ShiftClk, ee_addr);
+ eeprom_delay(ee_addr);
+ }
+ OUTL(dev, EE_ChipSelect, ee_addr);
+ eeprom_delay(ee_addr);
+
+ for (i = 0; i < 16; i++) {
+ OUTL(dev, EE_ChipSelect | EE_ShiftClk, ee_addr);
+ eeprom_delay(ee_addr);
+ retval |= (INL(dev, ee_addr) & EE_DataOut) ? 1 << i : 0;
+ OUTL(dev, EE_ChipSelect, ee_addr);
+ eeprom_delay(ee_addr);
+ }
+
+ /* Terminate the EEPROM access. */
+ OUTL(dev, EE_Write0, ee_addr);
+ OUTL(dev, 0, ee_addr);
+#ifdef NATSEMI_DEBUG
+ if (natsemi_debug)
+ printf("read_eeprom: %08x, %08x, retval %08x\n",
+ dev->iobase + ee_addr, read_cmd, retval);
+#endif
+ return retval;
+}
+
+/* MII transceiver control section.
+ The 83815 series has an internal transceiver, and we present the
+ management registers as if they were MII connected. */
+
+static int
+mdio_read(struct eth_device *dev, int phy_id, int location)
+{
+ if (phy_id == 1 && location < 32)
+ return INL(dev, BasicControl+(location<<2))&0xffff;
+ else
+ return 0xffff;
+}
+
+/* Function: natsemi_init
+ *
+ * Description: resets the ethernet controller chip and configures
+ * registers and data structures required for sending and receiving packets.
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * returns: int.
+ */
+
+static int
+natsemi_init(struct eth_device *dev, bd_t * bis)
+{
+
+ natsemi_reset(dev);
+
+ /* Disable PME:
+ * The PME bit is initialized from the EEPROM contents.
+ * PCI cards probably have PME disabled, but motherboard
+ * implementations may have PME set to enable WakeOnLan.
+ * With PME set the chip will scan incoming packets but
+ * nothing will be written to memory. */
+ OUTL(dev, SavedClkRun & ~0x100, ClkRun);
+
+ natsemi_init_rxfilter(dev);
+ natsemi_init_txd(dev);
+ natsemi_init_rxd(dev);
+
+ /* Configure the PCI bus bursts and FIFO thresholds. */
+ tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 | (0x1002);
+ rx_config = RxMxdma_256 | 0x20;
+
+#ifdef NATSEMI_DEBUG
+ printf("%s: Setting TxConfig Register %#08X\n", dev->name, tx_config);
+ printf("%s: Setting RxConfig Register %#08X\n", dev->name, rx_config);
+#endif
+ OUTL(dev, tx_config, TxConfig);
+ OUTL(dev, rx_config, RxConfig);
+
+ natsemi_check_duplex(dev);
+ natsemi_set_rx_mode(dev);
+
+ OUTL(dev, (RxOn | TxOn), ChipCmd);
+ return 1;
+}
+
+/*
+ * Function: natsemi_reset
+ *
+ * Description: soft resets the controller chip
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * Returns: void.
+ */
+static void
+natsemi_reset(struct eth_device *dev)
+{
+ OUTL(dev, ChipReset, ChipCmd);
+
+ /* On page 78 of the spec, they recommend some settings for "optimum
+ performance" to be done in sequence. These settings optimize some
+ of the 100Mbit autodetection circuitry. Also, we only want to do
+ this for rev C of the chip. */
+ if (INL(dev, SiliconRev) == 0x302) {
+ OUTW(dev, 0x0001, PGSEL);
+ OUTW(dev, 0x189C, PMDCSR);
+ OUTW(dev, 0x0000, TSTDAT);
+ OUTW(dev, 0x5040, DSPCFG);
+ OUTW(dev, 0x008C, SDCFG);
+ }
+ /* Disable interrupts using the mask. */
+ OUTL(dev, 0, IntrMask);
+ OUTL(dev, 0, IntrEnable);
+}
+
+/* Function: natsemi_init_rxfilter
+ *
+ * Description: sets receive filter address to our MAC address
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * returns: void.
+ */
+
+static void
+natsemi_init_rxfilter(struct eth_device *dev)
+{
+ int i;
+
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ OUTL(dev, i, RxFilterAddr);
+ OUTW(dev, dev->enetaddr[i] + (dev->enetaddr[i + 1] << 8),
+ RxFilterData);
+ }
+}
+
+/*
+ * Function: natsemi_init_txd
+ *
+ * Description: initializes the Tx descriptor
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * returns: void.
+ */
+
+static void
+natsemi_init_txd(struct eth_device *dev)
+{
+ txd.link = (u32) 0;
+ txd.cmdsts = (u32) 0;
+ txd.bufptr = (u32) & txb[0];
+
+ /* load Transmit Descriptor Register */
+ OUTL(dev, (u32) & txd, TxRingPtr);
+#ifdef NATSEMI_DEBUG
+ printf("natsemi_init_txd: TX descriptor reg loaded with: %#08X\n",
+ INL(dev, TxRingPtr));
+#endif
+}
+
+/* Function: natsemi_init_rxd
+ *
+ * Description: initializes the Rx descriptor ring
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * Returns: void.
+ */
+
+static void
+natsemi_init_rxd(struct eth_device *dev)
+{
+ int i;
+
+ cur_rx = 0;
+
+ /* init RX descriptor */
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ rxd[i].link =
+ cpu_to_le32((i + 1 <
+ NUM_RX_DESC) ? (u32) & rxd[i +
+ 1] : (u32) &
+ rxd[0]);
+ rxd[i].cmdsts = cpu_to_le32((u32) RX_BUF_SIZE);
+ rxd[i].bufptr = cpu_to_le32((u32) & rxb[i * RX_BUF_SIZE]);
+#ifdef NATSEMI_DEBUG
+ printf
+ ("natsemi_init_rxd: rxd[%d]=%p link=%X cmdsts=%lX bufptr=%X\n",
+ i, &rxd[i], le32_to_cpu(rxd[i].link),
+ rxd[i].cmdsts, rxd[i].bufptr);
+#endif
+ }
+
+ /* load Receive Descriptor Register */
+ OUTL(dev, (u32) & rxd[0], RxRingPtr);
+
+#ifdef NATSEMI_DEBUG
+ printf("natsemi_init_rxd: RX descriptor register loaded with: %X\n",
+ INL(dev, RxRingPtr));
+#endif
+}
+
+/* Function: natsemi_set_rx_mode
+ *
+ * Description:
+ * sets the receive mode to accept all broadcast packets and packets
+ * with our MAC address, and reject all multicast packets.
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * Returns: void.
+ */
+
+static void
+natsemi_set_rx_mode(struct eth_device *dev)
+{
+ u32 rx_mode = AcceptBroadcast | AcceptMyPhys;
+
+ OUTL(dev, rx_mode, RxFilterAddr);
+}
+
+static void
+natsemi_check_duplex(struct eth_device *dev)
+{
+ int duplex = INL(dev, ChipConfig) & FullDuplex ? 1 : 0;
+
+#ifdef NATSEMI_DEBUG
+ printf("%s: Setting %s-duplex based on negotiated link"
+ " capability.\n", dev->name, duplex ? "full" : "half");
+#endif
+ if (duplex) {
+ rx_config |= RxAcceptTx;
+ tx_config |= (TxCarrierIgn | TxHeartIgn);
+ } else {
+ rx_config &= ~RxAcceptTx;
+ tx_config &= ~(TxCarrierIgn | TxHeartIgn);
+ }
+ OUTL(dev, tx_config, TxConfig);
+ OUTL(dev, rx_config, RxConfig);
+}
+
+/* Function: natsemi_send
+ *
+ * Description: transmits a packet and waits for completion or timeout.
+ *
+ * Returns: void. */
+static int
+natsemi_send(struct eth_device *dev, volatile void *packet, int length)
+{
+ u32 i, status = 0;
+ u32 tx_status = 0;
+ vu_long *res = (vu_long *)&tx_status;
+
+ /* Stop the transmitter */
+ OUTL(dev, TxOff, ChipCmd);
+
+#ifdef NATSEMI_DEBUG
+ if (natsemi_debug)
+ printf("natsemi_send: sending %d bytes\n", (int) length);
+#endif
+
+ /* set the transmit buffer descriptor and enable Transmit State Machine */
+ txd.link = cpu_to_le32(0);
+ txd.bufptr = cpu_to_le32(phys_to_bus((u32) packet));
+ txd.cmdsts = cpu_to_le32(DescOwn | length);
+
+ /* load Transmit Descriptor Register */
+ OUTL(dev, phys_to_bus((u32) & txd), TxRingPtr);
+#ifdef NATSEMI_DEBUG
+ if (natsemi_debug)
+ printf("natsemi_send: TX descriptor register loaded with: %#08X\n",
+ INL(dev, TxRingPtr));
+#endif
+ /* restart the transmitter */
+ OUTL(dev, TxOn, ChipCmd);
+
+ for (i = 0;
+ (*res = le32_to_cpu(txd.cmdsts)) & DescOwn;
+ i++) {
+ if (i >= TOUT_LOOP) {
+ printf
+ ("%s: tx error buffer not ready: txd.cmdsts == %#X\n",
+ dev->name, tx_status);
+ goto Done;
+ }
+ }
+
+ if (!(tx_status & DescPktOK)) {
+ printf("natsemi_send: Transmit error, Tx status %X.\n",
+ tx_status);
+ goto Done;
+ }
+
+ status = 1;
+ Done:
+ return status;
+}
+
+/* Function: natsemi_poll
+ *
+ * Description: checks for a received packet and returns it if found.
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * Returns: 1 if packet was received.
+ * 0 if no packet was received.
+ *
+ * Side effects:
+ * Returns (copies) the packet to the array dev->packet.
+ * Returns the length of the packet.
+ */
+
+static int
+natsemi_poll(struct eth_device *dev)
+{
+ int retstat = 0;
+ int length = 0;
+ u32 rx_status = le32_to_cpu(rxd[cur_rx].cmdsts);
+
+ if (!(rx_status & (u32) DescOwn))
+ return retstat;
+#ifdef NATSEMI_DEBUG
+ if (natsemi_debug)
+ printf("natsemi_poll: got a packet: cur_rx:%d, status:%X\n",
+ cur_rx, rx_status);
+#endif
+ length = (rx_status & DSIZE) - CRC_SIZE;
+
+ if ((rx_status & (DescMore | DescPktOK | DescRxLong)) != DescPktOK) {
+ printf
+ ("natsemi_poll: Corrupted packet received, buffer status = %X\n",
+ rx_status);
+ retstat = 0;
+ } else { /* give packet to higher level routine */
+ NetReceive((rxb + cur_rx * RX_BUF_SIZE), length);
+ retstat = 1;
+ }
+
+ /* return the descriptor and buffer to receive ring */
+ rxd[cur_rx].cmdsts = cpu_to_le32(RX_BUF_SIZE);
+ rxd[cur_rx].bufptr = cpu_to_le32((u32) & rxb[cur_rx * RX_BUF_SIZE]);
+
+ if (++cur_rx == NUM_RX_DESC)
+ cur_rx = 0;
+
+ /* re-enable the potentially idle receive state machine */
+ OUTL(dev, RxOn, ChipCmd);
+
+ return retstat;
+}
+
+/* Function: natsemi_disable
+ *
+ * Description: Turns off interrupts and stops Tx and Rx engines
+ *
+ * Arguments: struct eth_device *dev: NIC data structure
+ *
+ * Returns: void.
+ */
+
+static void
+natsemi_disable(struct eth_device *dev)
+{
+ /* Disable interrupts using the mask. */
+ OUTL(dev, 0, IntrMask);
+ OUTL(dev, 0, IntrEnable);
+
+ /* Stop the chip's Tx and Rx processes. */
+ OUTL(dev, RxOff | TxOff, ChipCmd);
+
+ /* Restore PME enable bit */
+ OUTL(dev, SavedClkRun, ClkRun);
+}
+
+#endif
diff --git a/drivers/net/ne2000.c b/drivers/net/ne2000.c
new file mode 100644
index 0000000..c978d62
--- /dev/null
+++ b/drivers/net/ne2000.c
@@ -0,0 +1,940 @@
+/*
+Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
+
+Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
+eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
+are GPL, so this is, of course, GPL.
+
+
+==========================================================================
+
+dev/if_dp83902a.c
+
+Ethernet device driver for NS DP83902a ethernet controller
+
+==========================================================================
+####ECOSGPLCOPYRIGHTBEGIN####
+-------------------------------------------
+This file is part of eCos, the Embedded Configurable Operating System.
+Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+
+eCos is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2 or (at your option) any later version.
+
+eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License along
+with eCos; if not, write to the Free Software Foundation, Inc.,
+59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+As a special exception, if other files instantiate templates or use macros
+or inline functions from this file, or you compile this file and link it
+with other works to produce a work based on this file, this file does not
+by itself cause the resulting work to be covered by the GNU General Public
+License. However the source code for this file must still be made available
+in accordance with section (3) of the GNU General Public License.
+
+This exception does not invalidate any other reasons why a work based on
+this file might be covered by the GNU General Public License.
+
+Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+at http://sources.redhat.com/ecos/ecos-license/
+-------------------------------------------
+####ECOSGPLCOPYRIGHTEND####
+####BSDCOPYRIGHTBEGIN####
+
+-------------------------------------------
+
+Portions of this software may have been derived from OpenBSD or other sources,
+and are covered by the appropriate copyright disclaimers included herein.
+
+-------------------------------------------
+
+####BSDCOPYRIGHTEND####
+==========================================================================
+#####DESCRIPTIONBEGIN####
+
+Author(s): gthomas
+Contributors: gthomas, jskov, rsandifo
+Date: 2001-06-13
+Purpose:
+Description:
+
+FIXME: Will fail if pinged with large packets (1520 bytes)
+Add promisc config
+Add SNMP
+
+####DESCRIPTIONEND####
+
+
+==========================================================================
+
+*/
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <malloc.h>
+
+#ifdef CONFIG_DRIVER_NE2000
+
+/* wor around udelay resetting OCR */
+static void my_udelay(long us) {
+ long tmo;
+
+ tmo = get_timer (0) + us * CFG_HZ / 1000000; /* will this be much greater than 0 ? */
+ while (get_timer (0) < tmo);
+}
+
+#define mdelay(n) my_udelay((n)*1000)
+
+/* forward definition of function used for the uboot interface */
+void uboot_push_packet_len(int len);
+void uboot_push_tx_done(int key, int val);
+
+/* timeout for tx/rx in s */
+#define TOUT 5
+
+#define ETHER_ADDR_LEN 6
+
+/*
+ ------------------------------------------------------------------------
+ Debugging details
+
+ Set to perms of:
+ 0 disables all debug output
+ 1 for process debug output
+ 2 for added data IO output: get_reg, put_reg
+ 4 for packet allocation/free output
+ 8 for only startup status, so we can tell we're installed OK
+*/
+/*#define DEBUG 0xf*/
+#define DEBUG 0
+
+#if DEBUG & 1
+#define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0)
+#define DEBUG_LINE() do { printf("%d\n", __LINE__); } while (0)
+#else
+#define DEBUG_FUNCTION() do {} while(0)
+#define DEBUG_LINE() do {} while(0)
+#endif
+
+#include "ne2000.h"
+
+#if DEBUG & 1
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+static dp83902a_priv_data_t nic; /* just one instance of the card supported */
+
+static bool
+dp83902a_init(void)
+{
+ dp83902a_priv_data_t *dp = &nic;
+ cyg_uint8* base;
+ int i;
+
+ DEBUG_FUNCTION();
+
+ base = dp->base;
+ if (!base) return false; /* No device found */
+
+ DEBUG_LINE();
+
+ /* Prepare ESA */
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1); /* Select page 1 */
+ /* Use the address from the serial EEPROM */
+ for (i = 0; i < 6; i++)
+ DP_IN(base, DP_P1_PAR0+i, dp->esa[i]);
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0); /* Select page 0 */
+
+ printf("NE2000 - %s ESA: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ "eeprom",
+ dp->esa[0],
+ dp->esa[1],
+ dp->esa[2],
+ dp->esa[3],
+ dp->esa[4],
+ dp->esa[5] );
+
+ return true;
+}
+
+static void
+dp83902a_stop(void)
+{
+ dp83902a_priv_data_t *dp = &nic;
+ cyg_uint8 *base = dp->base;
+
+ DEBUG_FUNCTION();
+
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */
+ DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */
+ DP_OUT(base, DP_IMR, 0x00); /* Disable all interrupts */
+
+ dp->running = false;
+}
+
+/*
+ This function is called to "start up" the interface. It may be called
+ multiple times, even when the hardware is already running. It will be
+ called whenever something "hardware oriented" changes and should leave
+ the hardware ready to send/receive packets.
+*/
+static void
+dp83902a_start(unsigned char * enaddr)
+{
+ dp83902a_priv_data_t *dp = &nic;
+ cyg_uint8 *base = dp->base;
+ int i;
+
+ DEBUG_FUNCTION();
+
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */
+ DP_OUT(base, DP_DCR, DP_DCR_INIT);
+ DP_OUT(base, DP_RBCH, 0); /* Remote byte count */
+ DP_OUT(base, DP_RBCL, 0);
+ DP_OUT(base, DP_RCR, DP_RCR_MON); /* Accept no packets */
+ DP_OUT(base, DP_TCR, DP_TCR_LOCAL); /* Transmitter [virtually] off */
+ DP_OUT(base, DP_TPSR, dp->tx_buf1); /* Transmitter start page */
+ dp->tx1 = dp->tx2 = 0;
+ dp->tx_next = dp->tx_buf1;
+ dp->tx_started = false;
+ DP_OUT(base, DP_PSTART, dp->rx_buf_start); /* Receive ring start page */
+ DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1); /* Receive ring boundary */
+ DP_OUT(base, DP_PSTOP, dp->rx_buf_end); /* Receive ring end page */
+ dp->rx_next = dp->rx_buf_start-1;
+ DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */
+ DP_OUT(base, DP_IMR, DP_IMR_All); /* Enable all interrupts */
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP); /* Select page 1 */
+ DP_OUT(base, DP_P1_CURP, dp->rx_buf_start); /* Current page - next free page for Rx */
+ for (i = 0; i < ETHER_ADDR_LEN; i++) {
+ DP_OUT(base, DP_P1_PAR0+i, enaddr[i]);
+ }
+ /* Enable and start device */
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+ DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* Normal transmit operations */
+ DP_OUT(base, DP_RCR, DP_RCR_AB); /* Accept broadcast, no errors, no multicast */
+ dp->running = true;
+}
+
+/*
+ This routine is called to start the transmitter. It is split out from the
+ data handling routine so it may be called either when data becomes first
+ available or when an Tx interrupt occurs
+*/
+
+static void
+dp83902a_start_xmit(int start_page, int len)
+{
+ dp83902a_priv_data_t *dp = (dp83902a_priv_data_t *) &nic;
+ cyg_uint8 *base = dp->base;
+
+ DEBUG_FUNCTION();
+
+#if DEBUG & 1
+ printf("Tx pkt %d len %d\n", start_page, len);
+ if (dp->tx_started)
+ printf("TX already started?!?\n");
+#endif
+
+ DP_OUT(base, DP_ISR, (DP_ISR_TxP | DP_ISR_TxE));
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+ DP_OUT(base, DP_TBCL, len & 0xFF);
+ DP_OUT(base, DP_TBCH, len >> 8);
+ DP_OUT(base, DP_TPSR, start_page);
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
+
+ dp->tx_started = true;
+}
+
+/*
+ This routine is called to send data to the hardware. It is known a-priori
+ that there is free buffer space (dp->tx_next).
+*/
+static void
+dp83902a_send(unsigned char *data, int total_len, unsigned long key)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ cyg_uint8 *base = dp->base;
+ int len, start_page, pkt_len, i, isr;
+#if DEBUG & 4
+ int dx;
+#endif
+
+ DEBUG_FUNCTION();
+
+ len = pkt_len = total_len;
+ if (pkt_len < IEEE_8023_MIN_FRAME) pkt_len = IEEE_8023_MIN_FRAME;
+
+ start_page = dp->tx_next;
+ if (dp->tx_next == dp->tx_buf1) {
+ dp->tx1 = start_page;
+ dp->tx1_len = pkt_len;
+ dp->tx1_key = key;
+ dp->tx_next = dp->tx_buf2;
+ } else {
+ dp->tx2 = start_page;
+ dp->tx2_len = pkt_len;
+ dp->tx2_key = key;
+ dp->tx_next = dp->tx_buf1;
+ }
+
+#if DEBUG & 5
+ printf("TX prep page %d len %d\n", start_page, pkt_len);
+#endif
+
+ DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
+ {
+ /* Dummy read. The manual sez something slightly different, */
+ /* but the code is extended a bit to do what Hitachi's monitor */
+ /* does (i.e., also read data). */
+
+ cyg_uint16 tmp;
+ int len = 1;
+
+ DP_OUT(base, DP_RSAL, 0x100-len);
+ DP_OUT(base, DP_RSAH, (start_page-1) & 0xff);
+ DP_OUT(base, DP_RBCL, len);
+ DP_OUT(base, DP_RBCH, 0);
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_RDMA | DP_CR_START);
+ DP_IN_DATA(dp->data, tmp);
+ }
+
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
+ /* Stall for a bit before continuing to work around random data */
+ /* corruption problems on some platforms. */
+ CYGACC_CALL_IF_DELAY_US(1);
+#endif
+
+ /* Send data to device buffer(s) */
+ DP_OUT(base, DP_RSAL, 0);
+ DP_OUT(base, DP_RSAH, start_page);
+ DP_OUT(base, DP_RBCL, pkt_len & 0xFF);
+ DP_OUT(base, DP_RBCH, pkt_len >> 8);
+ DP_OUT(base, DP_CR, DP_CR_WDMA | DP_CR_START);
+
+ /* Put data into buffer */
+#if DEBUG & 4
+ printf(" sg buf %08lx len %08x\n ", (unsigned long) data, len);
+ dx = 0;
+#endif
+ while (len > 0) {
+#if DEBUG & 4
+ printf(" %02x", *data);
+ if (0 == (++dx % 16)) printf("\n ");
+#endif
+ DP_OUT_DATA(dp->data, *data++);
+ len--;
+ }
+#if DEBUG & 4
+ printf("\n");
+#endif
+ if (total_len < pkt_len) {
+#if DEBUG & 4
+ printf(" + %d bytes of padding\n", pkt_len - total_len);
+#endif
+ /* Padding to 802.3 length was required */
+ for (i = total_len; i < pkt_len;) {
+ i++;
+ DP_OUT_DATA(dp->data, 0);
+ }
+ }
+
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
+ /* After last data write, delay for a bit before accessing the */
+ /* device again, or we may get random data corruption in the last */
+ /* datum (on some platforms). */
+ CYGACC_CALL_IF_DELAY_US(1);
+#endif
+
+ /* Wait for DMA to complete */
+ do {
+ DP_IN(base, DP_ISR, isr);
+ } while ((isr & DP_ISR_RDC) == 0);
+ /* Then disable DMA */
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+
+ /* Start transmit if not already going */
+ if (!dp->tx_started) {
+ if (start_page == dp->tx1) {
+ dp->tx_int = 1; /* Expecting interrupt from BUF1 */
+ } else {
+ dp->tx_int = 2; /* Expecting interrupt from BUF2 */
+ }
+ dp83902a_start_xmit(start_page, pkt_len);
+ }
+}
+
+/*
+ This function is called when a packet has been received. It's job is
+ to prepare to unload the packet from the hardware. Once the length of
+ the packet is known, the upper layer of the driver can be told. When
+ the upper layer is ready to unload the packet, the internal function
+ 'dp83902a_recv' will be called to actually fetch it from the hardware.
+*/
+static void
+dp83902a_RxEvent(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ cyg_uint8 *base = dp->base;
+ unsigned char rsr;
+ unsigned char rcv_hdr[4];
+ int i, len, pkt, cur;
+
+ DEBUG_FUNCTION();
+
+ DP_IN(base, DP_RSR, rsr);
+ while (true) {
+ /* Read incoming packet header */
+ DP_OUT(base, DP_CR, DP_CR_PAGE1 | DP_CR_NODMA | DP_CR_START);
+ DP_IN(base, DP_P1_CURP, cur);
+ DP_OUT(base, DP_P1_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+ DP_IN(base, DP_BNDRY, pkt);
+
+ pkt += 1;
+ if (pkt == dp->rx_buf_end)
+ pkt = dp->rx_buf_start;
+
+ if (pkt == cur) {
+ break;
+ }
+ DP_OUT(base, DP_RBCL, sizeof(rcv_hdr));
+ DP_OUT(base, DP_RBCH, 0);
+ DP_OUT(base, DP_RSAL, 0);
+ DP_OUT(base, DP_RSAH, pkt);
+ if (dp->rx_next == pkt) {
+ if (cur == dp->rx_buf_start)
+ DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1);
+ else
+ DP_OUT(base, DP_BNDRY, cur-1); /* Update pointer */
+ return;
+ }
+ dp->rx_next = pkt;
+ DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
+ DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
+ CYGACC_CALL_IF_DELAY_US(10);
+#endif
+
+ for (i = 0; i < sizeof(rcv_hdr);) {
+ DP_IN_DATA(dp->data, rcv_hdr[i++]);
+ }
+
+#if DEBUG & 5
+ printf("rx hdr %02x %02x %02x %02x\n",
+ rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
+#endif
+ len = ((rcv_hdr[3] << 8) | rcv_hdr[2]) - sizeof(rcv_hdr);
+ uboot_push_packet_len(len);
+ if (rcv_hdr[1] == dp->rx_buf_start)
+ DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1);
+ else
+ DP_OUT(base, DP_BNDRY, rcv_hdr[1]-1); /* Update pointer */
+ }
+}
+
+/*
+ This function is called as a result of the "eth_drv_recv()" call above.
+ It's job is to actually fetch data for a packet from the hardware once
+ memory buffers have been allocated for the packet. Note that the buffers
+ may come in pieces, using a scatter-gather list. This allows for more
+ efficient processing in the upper layers of the stack.
+*/
+static void
+dp83902a_recv(unsigned char *data, int len)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ cyg_uint8 *base = dp->base;
+ int i, mlen;
+ cyg_uint8 saved_char = 0;
+ bool saved;
+#if DEBUG & 4
+ int dx;
+#endif
+
+ DEBUG_FUNCTION();
+
+#if DEBUG & 5
+ printf("Rx packet %d length %d\n", dp->rx_next, len);
+#endif
+
+ /* Read incoming packet data */
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+ DP_OUT(base, DP_RBCL, len & 0xFF);
+ DP_OUT(base, DP_RBCH, len >> 8);
+ DP_OUT(base, DP_RSAL, 4); /* Past header */
+ DP_OUT(base, DP_RSAH, dp->rx_next);
+ DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
+ DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
+ CYGACC_CALL_IF_DELAY_US(10);
+#endif
+
+ saved = false;
+ for (i = 0; i < 1; i++) {
+ if (data) {
+ mlen = len;
+#if DEBUG & 4
+ printf(" sg buf %08lx len %08x \n", (unsigned long) data, mlen);
+ dx = 0;
+#endif
+ while (0 < mlen) {
+ /* Saved byte from previous loop? */
+ if (saved) {
+ *data++ = saved_char;
+ mlen--;
+ saved = false;
+ continue;
+ }
+
+ {
+ cyg_uint8 tmp;
+ DP_IN_DATA(dp->data, tmp);
+#if DEBUG & 4
+ printf(" %02x", tmp);
+ if (0 == (++dx % 16)) printf("\n ");
+#endif
+ *data++ = tmp;;
+ mlen--;
+ }
+ }
+#if DEBUG & 4
+ printf("\n");
+#endif
+ }
+ }
+}
+
+static void
+dp83902a_TxEvent(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ cyg_uint8 *base = dp->base;
+ unsigned char tsr;
+ unsigned long key;
+
+ DEBUG_FUNCTION();
+
+ DP_IN(base, DP_TSR, tsr);
+ if (dp->tx_int == 1) {
+ key = dp->tx1_key;
+ dp->tx1 = 0;
+ } else {
+ key = dp->tx2_key;
+ dp->tx2 = 0;
+ }
+ /* Start next packet if one is ready */
+ dp->tx_started = false;
+ if (dp->tx1) {
+ dp83902a_start_xmit(dp->tx1, dp->tx1_len);
+ dp->tx_int = 1;
+ } else if (dp->tx2) {
+ dp83902a_start_xmit(dp->tx2, dp->tx2_len);
+ dp->tx_int = 2;
+ } else {
+ dp->tx_int = 0;
+ }
+ /* Tell higher level we sent this packet */
+ uboot_push_tx_done(key, 0);
+}
+
+/* Read the tally counters to clear them. Called in response to a CNT */
+/* interrupt. */
+static void
+dp83902a_ClearCounters(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ cyg_uint8 *base = dp->base;
+ cyg_uint8 cnt1, cnt2, cnt3;
+
+ DP_IN(base, DP_FER, cnt1);
+ DP_IN(base, DP_CER, cnt2);
+ DP_IN(base, DP_MISSED, cnt3);
+ DP_OUT(base, DP_ISR, DP_ISR_CNT);
+}
+
+/* Deal with an overflow condition. This code follows the procedure set */
+/* out in section 7.0 of the datasheet. */
+static void
+dp83902a_Overflow(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *)&nic;
+ cyg_uint8 *base = dp->base;
+ cyg_uint8 isr;
+
+ /* Issue a stop command and wait 1.6ms for it to complete. */
+ DP_OUT(base, DP_CR, DP_CR_STOP | DP_CR_NODMA);
+ CYGACC_CALL_IF_DELAY_US(1600);
+
+ /* Clear the remote byte counter registers. */
+ DP_OUT(base, DP_RBCL, 0);
+ DP_OUT(base, DP_RBCH, 0);
+
+ /* Enter loopback mode while we clear the buffer. */
+ DP_OUT(base, DP_TCR, DP_TCR_LOCAL);
+ DP_OUT(base, DP_CR, DP_CR_START | DP_CR_NODMA);
+
+ /* Read in as many packets as we can and acknowledge any and receive */
+ /* interrupts. Since the buffer has overflowed, a receive event of */
+ /* some kind will have occured. */
+ dp83902a_RxEvent();
+ DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE);
+
+ /* Clear the overflow condition and leave loopback mode. */
+ DP_OUT(base, DP_ISR, DP_ISR_OFLW);
+ DP_OUT(base, DP_TCR, DP_TCR_NORMAL);
+
+ /* If a transmit command was issued, but no transmit event has occured, */
+ /* restart it here. */
+ DP_IN(base, DP_ISR, isr);
+ if (dp->tx_started && !(isr & (DP_ISR_TxP|DP_ISR_TxE))) {
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
+ }
+}
+
+static void
+dp83902a_poll(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ cyg_uint8 *base = dp->base;
+ unsigned char isr;
+
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0 | DP_CR_START);
+ DP_IN(base, DP_ISR, isr);
+ while (0 != isr) {
+ /* The CNT interrupt triggers when the MSB of one of the error */
+ /* counters is set. We don't much care about these counters, but */
+ /* we should read their values to reset them. */
+ if (isr & DP_ISR_CNT) {
+ dp83902a_ClearCounters();
+ }
+ /* Check for overflow. It's a special case, since there's a */
+ /* particular procedure that must be followed to get back into */
+ /* a running state.a */
+ if (isr & DP_ISR_OFLW) {
+ dp83902a_Overflow();
+ } else {
+ /* Other kinds of interrupts can be acknowledged simply by */
+ /* clearing the relevant bits of the ISR. Do that now, then */
+ /* handle the interrupts we care about. */
+ DP_OUT(base, DP_ISR, isr); /* Clear set bits */
+ if (!dp->running) break; /* Is this necessary? */
+ /* Check for tx_started on TX event since these may happen */
+ /* spuriously it seems. */
+ if (isr & (DP_ISR_TxP|DP_ISR_TxE) && dp->tx_started) {
+ dp83902a_TxEvent();
+ }
+ if (isr & (DP_ISR_RxP|DP_ISR_RxE)) {
+ dp83902a_RxEvent();
+ }
+ }
+ DP_IN(base, DP_ISR, isr);
+ }
+}
+
+/* find prom (taken from pc_net_cs.c from Linux) */
+
+#include "8390.h"
+
+typedef struct hw_info_t {
+ u_int offset;
+ u_char a0, a1, a2;
+ u_int flags;
+} hw_info_t;
+
+#define DELAY_OUTPUT 0x01
+#define HAS_MISC_REG 0x02
+#define USE_BIG_BUF 0x04
+#define HAS_IBM_MISC 0x08
+#define IS_DL10019 0x10
+#define IS_DL10022 0x20
+#define HAS_MII 0x40
+#define USE_SHMEM 0x80 /* autodetected */
+
+#define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */
+#define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */
+#define MII_PHYID_REV_MASK 0xfffffff0
+#define MII_PHYID_REG1 0x02
+#define MII_PHYID_REG2 0x03
+
+static hw_info_t hw_info[] = {
+ { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT },
+ { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 },
+ { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 },
+ { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94,
+ DELAY_OUTPUT | HAS_IBM_MISC },
+ { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 },
+ { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 },
+ { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 },
+ { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 },
+ { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 },
+ { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 },
+ { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 },
+ { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 },
+ { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 },
+ { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 },
+ { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 },
+ { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 },
+ { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 },
+ { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 },
+ { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45,
+ HAS_MISC_REG | HAS_IBM_MISC },
+ { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 },
+ { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 },
+ { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 },
+ { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b,
+ DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF },
+ { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 },
+ { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 },
+ { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 },
+ { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 },
+ { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 },
+ { /* Qemu */ 0x0, 0x52, 0x54, 0x00, 0 }
+};
+
+#define NR_INFO (sizeof(hw_info)/sizeof(hw_info_t))
+
+static hw_info_t default_info = { 0, 0, 0, 0, 0 };
+
+unsigned char dev_addr[6];
+
+#define PCNET_CMD 0x00
+#define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */
+#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */
+#define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */
+
+unsigned long nic_base;
+
+static void pcnet_reset_8390(void)
+{
+ int i, r;
+
+ PRINTK("nic base is %lx\n", nic_base);
+
+ n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+ PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
+ n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
+ PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
+ n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+ PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
+ n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+
+ n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
+
+ for (i = 0; i < 100; i++) {
+ if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
+ break;
+ PRINTK("got %x in reset\n", r);
+ my_udelay(100);
+ }
+ n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
+
+ if (i == 100)
+ printf("pcnet_reset_8390() did not complete.\n");
+} /* pcnet_reset_8390 */
+
+static hw_info_t * get_prom(void ) {
+ unsigned char prom[32];
+ int i, j;
+ struct {
+ u_char value, offset;
+ } program_seq[] = {
+ {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
+ {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
+ {0x00, EN0_RCNTLO}, /* Clear the count regs. */
+ {0x00, EN0_RCNTHI},
+ {0x00, EN0_IMR}, /* Mask completion irq. */
+ {0xFF, EN0_ISR},
+ {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
+ {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
+ {32, EN0_RCNTLO},
+ {0x00, EN0_RCNTHI},
+ {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
+ {0x00, EN0_RSARHI},
+ {E8390_RREAD+E8390_START, E8390_CMD},
+ };
+
+ PRINTK("trying to get MAC via prom reading\n");
+
+ pcnet_reset_8390();
+
+ mdelay(10);
+
+ for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
+ n2k_outb(program_seq[i].value, program_seq[i].offset);
+
+ PRINTK("PROM:");
+ for (i = 0; i < 32; i++) {
+ prom[i] = n2k_inb(PCNET_DATAPORT);
+ PRINTK(" %02x", prom[i]);
+ }
+ PRINTK("\n");
+ for (i = 0; i < NR_INFO; i++) {
+ if ((prom[0] == hw_info[i].a0) &&
+ (prom[2] == hw_info[i].a1) &&
+ (prom[4] == hw_info[i].a2)) {
+ PRINTK("matched board %d\n", i);
+ break;
+ }
+ }
+ if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
+ for (j = 0; j < 6; j++)
+ dev_addr[j] = prom[j<<1];
+ PRINTK("on exit i is %d/%ld\n", i, NR_INFO);
+ PRINTK("MAC address is %02x:%02x:%02x:%02x:%02x:%02x\n",
+ dev_addr[0],dev_addr[1],dev_addr[2],dev_addr[3],dev_addr[4],dev_addr[5]);
+ return (i < NR_INFO) ? hw_info+i : &default_info;
+ }
+ return NULL;
+}
+
+/* U-boot specific routines */
+
+
+static unsigned char *pbuf = NULL;
+
+static int pkey = -1;
+static int initialized=0;
+
+void uboot_push_packet_len(int len) {
+ PRINTK("pushed len = %d\n", len);
+ if (len>=2000) {
+ printf("NE2000: packet too big\n");
+ return;
+ }
+ dp83902a_recv(&pbuf[0], len);
+
+ /*Just pass it to the upper layer*/
+ NetReceive(&pbuf[0], len);
+}
+
+void uboot_push_tx_done(int key, int val) {
+ PRINTK("pushed key = %d\n", key);
+ pkey = key;
+}
+
+int eth_init(bd_t *bd) {
+ static hw_info_t * r;
+ char ethaddr[20];
+
+ PRINTK("### eth_init\n");
+
+ if (!pbuf) {
+ pbuf = malloc(2000);
+ if (!pbuf) {
+ printf("Cannot allocate rx buffer\n");
+ return -1;
+ }
+ }
+
+#ifdef CONFIG_DRIVER_NE2000_CCR
+ {
+ volatile unsigned char *p = (volatile unsigned char *) CONFIG_DRIVER_NE2000_CCR;
+
+ PRINTK("CCR before is %x\n", *p);
+ *p = CONFIG_DRIVER_NE2000_VAL;
+ PRINTK("CCR after is %x\n", *p);
+ }
+#endif
+
+ nic_base = CONFIG_DRIVER_NE2000_BASE;
+ nic.base = (cyg_uint8 *) CONFIG_DRIVER_NE2000_BASE;
+
+ r = get_prom();
+ if (!r)
+ return -1;
+
+ sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+ dev_addr[0], dev_addr[1],
+ dev_addr[2], dev_addr[3],
+ dev_addr[4], dev_addr[5]) ;
+ PRINTK("Set environment from HW MAC addr = \"%s\"\n", ethaddr);
+ setenv ("ethaddr", ethaddr);
+
+
+#define DP_DATA 0x10
+ nic.data = nic.base + DP_DATA;
+ nic.tx_buf1 = 0x40;
+ nic.tx_buf2 = 0x48;
+ nic.rx_buf_start = 0x50;
+ nic.rx_buf_end = 0x80;
+
+ if (dp83902a_init() == false)
+ return -1;
+ dp83902a_start(dev_addr);
+ initialized=1;
+ return 0;
+}
+
+void eth_halt() {
+
+ PRINTK("### eth_halt\n");
+ if(initialized)
+ dp83902a_stop();
+ initialized=0;
+}
+
+int eth_rx() {
+dp83902a_poll();
+return 1;
+}
+
+int eth_send(volatile void *packet, int length) {
+ int tmo;
+
+ PRINTK("### eth_send\n");
+
+ pkey = -1;
+
+ dp83902a_send((unsigned char *) packet, length, 666);
+ tmo = get_timer (0) + TOUT * CFG_HZ;
+ while(1) {
+ dp83902a_poll();
+ if (pkey != -1) {
+ PRINTK("Packet sucesfully sent\n");
+ return 0;
+ }
+ if (get_timer (0) >= tmo) {
+ printf("transmission error (timoeut)\n");
+ return 0;
+ }
+
+ }
+ return 0;
+}
+#endif
diff --git a/drivers/net/ne2000.h b/drivers/net/ne2000.h
new file mode 100644
index 0000000..c13d9f0
--- /dev/null
+++ b/drivers/net/ne2000.h
@@ -0,0 +1,279 @@
+/*
+Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
+
+Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
+eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
+are GPL, so this is, of course, GPL.
+
+
+==========================================================================
+
+ dev/dp83902a.h
+
+ National Semiconductor DP83902a ethernet chip
+
+==========================================================================
+####ECOSGPLCOPYRIGHTBEGIN####
+ -------------------------------------------
+ This file is part of eCos, the Embedded Configurable Operating System.
+ Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+
+ eCos is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2 or (at your option) any later version.
+
+ eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with eCos; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+ As a special exception, if other files instantiate templates or use macros
+ or inline functions from this file, or you compile this file and link it
+ with other works to produce a work based on this file, this file does not
+ by itself cause the resulting work to be covered by the GNU General Public
+ License. However the source code for this file must still be made available
+ in accordance with section (3) of the GNU General Public License.
+
+ This exception does not invalidate any other reasons why a work based on
+ this file might be covered by the GNU General Public License.
+
+ Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+ at http://sources.redhat.com/ecos/ecos-license/
+ -------------------------------------------
+####ECOSGPLCOPYRIGHTEND####
+####BSDCOPYRIGHTBEGIN####
+
+ -------------------------------------------
+
+ Portions of this software may have been derived from OpenBSD or other sources,
+ and are covered by the appropriate copyright disclaimers included herein.
+
+ -------------------------------------------
+
+####BSDCOPYRIGHTEND####
+==========================================================================
+#####DESCRIPTIONBEGIN####
+
+ Author(s): gthomas
+ Contributors: gthomas, jskov
+ Date: 2001-06-13
+ Purpose:
+ Description:
+
+####DESCRIPTIONEND####
+
+==========================================================================
+
+*/
+
+/*
+ ------------------------------------------------------------------------
+ Macros for accessing DP registers
+ These can be overridden by the platform header
+*/
+
+#define DP_IN(_b_, _o_, _d_) (_d_) = *( (volatile unsigned char *) ((_b_)+(_o_)))
+#define DP_OUT(_b_, _o_, _d_) *( (volatile unsigned char *) ((_b_)+(_o_))) = (_d_)
+
+#define DP_IN_DATA(_b_, _d_) (_d_) = *( (volatile unsigned char *) ((_b_)))
+#define DP_OUT_DATA(_b_, _d_) *( (volatile unsigned char *) ((_b_))) = (_d_)
+
+
+/* here is all the data */
+
+#define cyg_uint8 unsigned char
+#define cyg_uint16 unsigned short
+#define bool int
+
+#define false 0
+#define true 1
+
+#define CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA 1
+#define CYGACC_CALL_IF_DELAY_US(X) my_udelay(X)
+
+typedef struct dp83902a_priv_data {
+ cyg_uint8* base;
+ cyg_uint8* data;
+ cyg_uint8* reset;
+ int tx_next; /* First free Tx page */
+ int tx_int; /* Expecting interrupt from this buffer */
+ int rx_next; /* First free Rx page */
+ int tx1, tx2; /* Page numbers for Tx buffers */
+ unsigned long tx1_key, tx2_key; /* Used to ack when packet sent */
+ int tx1_len, tx2_len;
+ bool tx_started, running, hardwired_esa;
+ cyg_uint8 esa[6];
+ void* plf_priv;
+
+ /* Buffer allocation */
+ int tx_buf1, tx_buf2;
+ int rx_buf_start, rx_buf_end;
+} dp83902a_priv_data_t;
+
+/*
+ ------------------------------------------------------------------------
+ Some forward declarations
+*/
+static void dp83902a_poll(void);
+
+/* ------------------------------------------------------------------------ */
+/* Register offsets */
+
+#define DP_CR 0x00
+#define DP_CLDA0 0x01
+#define DP_PSTART 0x01 /* write */
+#define DP_CLDA1 0x02
+#define DP_PSTOP 0x02 /* write */
+#define DP_BNDRY 0x03
+#define DP_TSR 0x04
+#define DP_TPSR 0x04 /* write */
+#define DP_NCR 0x05
+#define DP_TBCL 0x05 /* write */
+#define DP_FIFO 0x06
+#define DP_TBCH 0x06 /* write */
+#define DP_ISR 0x07
+#define DP_CRDA0 0x08
+#define DP_RSAL 0x08 /* write */
+#define DP_CRDA1 0x09
+#define DP_RSAH 0x09 /* write */
+#define DP_RBCL 0x0a /* write */
+#define DP_RBCH 0x0b /* write */
+#define DP_RSR 0x0c
+#define DP_RCR 0x0c /* write */
+#define DP_FER 0x0d
+#define DP_TCR 0x0d /* write */
+#define DP_CER 0x0e
+#define DP_DCR 0x0e /* write */
+#define DP_MISSED 0x0f
+#define DP_IMR 0x0f /* write */
+#define DP_DATAPORT 0x10 /* "eprom" data port */
+
+#define DP_P1_CR 0x00
+#define DP_P1_PAR0 0x01
+#define DP_P1_PAR1 0x02
+#define DP_P1_PAR2 0x03
+#define DP_P1_PAR3 0x04
+#define DP_P1_PAR4 0x05
+#define DP_P1_PAR5 0x06
+#define DP_P1_CURP 0x07
+#define DP_P1_MAR0 0x08
+#define DP_P1_MAR1 0x09
+#define DP_P1_MAR2 0x0a
+#define DP_P1_MAR3 0x0b
+#define DP_P1_MAR4 0x0c
+#define DP_P1_MAR5 0x0d
+#define DP_P1_MAR6 0x0e
+#define DP_P1_MAR7 0x0f
+
+#define DP_P2_CR 0x00
+#define DP_P2_PSTART 0x01
+#define DP_P2_CLDA0 0x01 /* write */
+#define DP_P2_PSTOP 0x02
+#define DP_P2_CLDA1 0x02 /* write */
+#define DP_P2_RNPP 0x03
+#define DP_P2_TPSR 0x04
+#define DP_P2_LNPP 0x05
+#define DP_P2_ACH 0x06
+#define DP_P2_ACL 0x07
+#define DP_P2_RCR 0x0c
+#define DP_P2_TCR 0x0d
+#define DP_P2_DCR 0x0e
+#define DP_P2_IMR 0x0f
+
+/* Command register - common to all pages */
+
+#define DP_CR_STOP 0x01 /* Stop: software reset */
+#define DP_CR_START 0x02 /* Start: initialize device */
+#define DP_CR_TXPKT 0x04 /* Transmit packet */
+#define DP_CR_RDMA 0x08 /* Read DMA (recv data from device) */
+#define DP_CR_WDMA 0x10 /* Write DMA (send data to device) */
+#define DP_CR_SEND 0x18 /* Send packet */
+#define DP_CR_NODMA 0x20 /* Remote (or no) DMA */
+#define DP_CR_PAGE0 0x00 /* Page select */
+#define DP_CR_PAGE1 0x40
+#define DP_CR_PAGE2 0x80
+#define DP_CR_PAGEMSK 0x3F /* Used to mask out page bits */
+
+/* Data configuration register */
+
+#define DP_DCR_WTS 0x01 /* 1=16 bit word transfers */
+#define DP_DCR_BOS 0x02 /* 1=Little Endian */
+#define DP_DCR_LAS 0x04 /* 1=Single 32 bit DMA mode */
+#define DP_DCR_LS 0x08 /* 1=normal mode, 0=loopback */
+#define DP_DCR_ARM 0x10 /* 0=no send command (program I/O) */
+#define DP_DCR_FIFO_1 0x00 /* FIFO threshold */
+#define DP_DCR_FIFO_2 0x20
+#define DP_DCR_FIFO_4 0x40
+#define DP_DCR_FIFO_6 0x60
+
+#define DP_DCR_INIT (DP_DCR_LS|DP_DCR_FIFO_4)
+
+/* Interrupt status register */
+
+#define DP_ISR_RxP 0x01 /* Packet received */
+#define DP_ISR_TxP 0x02 /* Packet transmitted */
+#define DP_ISR_RxE 0x04 /* Receive error */
+#define DP_ISR_TxE 0x08 /* Transmit error */
+#define DP_ISR_OFLW 0x10 /* Receive overflow */
+#define DP_ISR_CNT 0x20 /* Tally counters need emptying */
+#define DP_ISR_RDC 0x40 /* Remote DMA complete */
+#define DP_ISR_RESET 0x80 /* Device has reset (shutdown, error) */
+
+/* Interrupt mask register */
+
+#define DP_IMR_RxP 0x01 /* Packet received */
+#define DP_IMR_TxP 0x02 /* Packet transmitted */
+#define DP_IMR_RxE 0x04 /* Receive error */
+#define DP_IMR_TxE 0x08 /* Transmit error */
+#define DP_IMR_OFLW 0x10 /* Receive overflow */
+#define DP_IMR_CNT 0x20 /* Tall counters need emptying */
+#define DP_IMR_RDC 0x40 /* Remote DMA complete */
+
+#define DP_IMR_All 0x3F /* Everything but remote DMA */
+
+/* Receiver control register */
+
+#define DP_RCR_SEP 0x01 /* Save bad(error) packets */
+#define DP_RCR_AR 0x02 /* Accept runt packets */
+#define DP_RCR_AB 0x04 /* Accept broadcast packets */
+#define DP_RCR_AM 0x08 /* Accept multicast packets */
+#define DP_RCR_PROM 0x10 /* Promiscuous mode */
+#define DP_RCR_MON 0x20 /* Monitor mode - 1=accept no packets */
+
+/* Receiver status register */
+
+#define DP_RSR_RxP 0x01 /* Packet received */
+#define DP_RSR_CRC 0x02 /* CRC error */
+#define DP_RSR_FRAME 0x04 /* Framing error */
+#define DP_RSR_FO 0x08 /* FIFO overrun */
+#define DP_RSR_MISS 0x10 /* Missed packet */
+#define DP_RSR_PHY 0x20 /* 0=pad match, 1=mad match */
+#define DP_RSR_DIS 0x40 /* Receiver disabled */
+#define DP_RSR_DFR 0x80 /* Receiver processing deferred */
+
+/* Transmitter control register */
+
+#define DP_TCR_NOCRC 0x01 /* 1=inhibit CRC */
+#define DP_TCR_NORMAL 0x00 /* Normal transmitter operation */
+#define DP_TCR_LOCAL 0x02 /* Internal NIC loopback */
+#define DP_TCR_INLOOP 0x04 /* Full internal loopback */
+#define DP_TCR_OUTLOOP 0x08 /* External loopback */
+#define DP_TCR_ATD 0x10 /* Auto transmit disable */
+#define DP_TCR_OFFSET 0x20 /* Collision offset adjust */
+
+/* Transmit status register */
+
+#define DP_TSR_TxP 0x01 /* Packet transmitted */
+#define DP_TSR_COL 0x04 /* Collision (at least one) */
+#define DP_TSR_ABT 0x08 /* Aborted because of too many collisions */
+#define DP_TSR_CRS 0x10 /* Lost carrier */
+#define DP_TSR_FU 0x20 /* FIFO underrun */
+#define DP_TSR_CDH 0x40 /* Collision Detect Heartbeat */
+#define DP_TSR_OWC 0x80 /* Collision outside normal window */
+
+#define IEEE_8023_MAX_FRAME 1518 /* Largest possible ethernet frame */
+#define IEEE_8023_MIN_FRAME 64 /* Smallest possible ethernet frame */
diff --git a/drivers/net/netarm_eth.c b/drivers/net/netarm_eth.c
new file mode 100644
index 0000000..a99ee5d
--- /dev/null
+++ b/drivers/net/netarm_eth.c
@@ -0,0 +1,360 @@
+/*
+ * Copyright (C) 2004 IMMS gGmbH <www.imms.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * author(s): Thomas Elste, <info@elste.org>
+ * (some parts derived from uCLinux Netarm Ethernet Driver)
+ */
+
+
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_NETARMETH
+#include <command.h>
+#include <net.h>
+#include "netarm_eth.h"
+#include <asm/arch/netarm_registers.h>
+
+
+#if defined(CONFIG_CMD_NET)
+
+static int na_mii_poll_busy (void);
+
+static void na_get_mac_addr (void)
+{
+ unsigned short p[3];
+ char *m_addr;
+ char ethaddr[20];
+
+ m_addr = (char *) p;
+
+ p[0] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_1);
+ p[1] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_2);
+ p[2] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_3);
+
+ sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+ m_addr[0], m_addr[1],
+ m_addr[2], m_addr[3], m_addr[4], m_addr[5]);
+
+ printf ("HW-MAC Address: %s\n", ethaddr);
+
+ /* set env, todo: check if already an adress is set */
+ setenv ("ethaddr", ethaddr);
+}
+
+
+static void na_mii_write (int reg, int value)
+{
+ int mii_addr;
+
+ /* Select register */
+ mii_addr = CFG_ETH_PHY_ADDR + reg;
+ SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
+ /* Write value */
+ SET_EADDR (NETARM_ETH_MII_WRITE, value);
+ na_mii_poll_busy ();
+}
+
+static unsigned int na_mii_read (int reg)
+{
+ int mii_addr, val;
+
+ /* Select register */
+ mii_addr = CFG_ETH_PHY_ADDR + reg;
+ SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
+ /* do one management cycle */
+ SET_EADDR (NETARM_ETH_MII_CMD,
+ GET_EADDR (NETARM_ETH_MII_CMD) | NETARM_ETH_MIIC_RSTAT);
+ na_mii_poll_busy ();
+ /* Return read value */
+ val = GET_EADDR (NETARM_ETH_MII_READ);
+ return val;
+}
+
+static int na_mii_poll_busy (void)
+{
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+ while (get_timer_masked () < NA_MII_POLL_BUSY_DELAY) {
+ if (!(GET_EADDR (NETARM_ETH_MII_IND) & NETARM_ETH_MIII_BUSY)) {
+ return 1;
+ }
+ }
+ printf ("na_mii_busy timeout\n");
+ return (0);
+}
+
+static int na_mii_identify_phy (void)
+{
+ int id_reg_a = 0;
+
+ /* get phy id register */
+ id_reg_a = na_mii_read (MII_PHY_ID);
+
+ if (id_reg_a == 0x0043) {
+ /* This must be an Enable or a Lucent LU3X31 PHY chip */
+ return 1;
+ } else if (id_reg_a == 0x0013) {
+ /* it is an Intel LXT971A */
+ return 1;
+ }
+ return (0);
+}
+
+static int na_mii_negotiate (void)
+{
+ int i = 0;
+
+ /* Enable auto-negotiation */
+ na_mii_write (MII_PHY_AUTONEGADV, 0x01e1);
+ /* FIXME: 0x01E1 is 100Mb half and full duplex, 0x0061 is 10Mb only */
+ /* Restart auto-negotiation */
+ na_mii_write (MII_PHY_CONTROL, 0x1200);
+
+ /* status register is 0xffff after setting the autoneg restart bit */
+ while (na_mii_read (MII_PHY_STATUS) == 0xffff) {
+ i++;
+ }
+
+ /* na_mii_read uses the timer already, so we can't use it again for
+ timeout checking.
+ Instead we just try some times.
+ */
+ for (i = 0; i < 40000; i++) {
+ if ((na_mii_read (MII_PHY_STATUS) & 0x0024) == 0x0024) {
+ return 0;
+ }
+ }
+ /*
+ printf("*Warning* autonegotiation timeout, status: 0x%x\n",na_mii_read(MII_PHY_STATUS));
+ */
+ return (1);
+}
+
+static unsigned int na_mii_check_speed (void)
+{
+ unsigned int status;
+
+ /* Read Status register */
+ status = na_mii_read (MII_PHY_STATUS);
+ /* Check link status. If 0, default to 100 Mbps. */
+ if ((status & 0x0004) == 0) {
+ printf ("*Warning* no link detected, set default speed to 100Mbs\n");
+ return 1;
+ } else {
+ if ((na_mii_read (17) & 0x4000) != 0) {
+ printf ("100Mbs link detected\n");
+ return 1;
+ } else {
+ printf ("10Mbs link detected\n");
+ return 0;
+ }
+ }
+ return 0;
+}
+
+static int reset_eth (void)
+{
+ int pt;
+
+ na_get_mac_addr ();
+ pt = na_mii_identify_phy ();
+
+ /* reset the phy */
+ na_mii_write (MII_PHY_CONTROL, 0x8000);
+ reset_timer_masked ();
+ while (get_timer_masked () < NA_MII_NEGOTIATE_DELAY) {
+ if ((na_mii_read (MII_PHY_STATUS) & 0x8000) == 0) {
+ break;
+ }
+ }
+ if (get_timer_masked () >= NA_MII_NEGOTIATE_DELAY)
+ printf ("phy reset timeout\n");
+
+ /* set the PCS reg */
+ SET_EADDR (NETARM_ETH_PCS_CFG, NETARM_ETH_PCSC_CLKS_25M |
+ NETARM_ETH_PCSC_ENJAB | NETARM_ETH_PCSC_NOCFR);
+
+ na_mii_negotiate ();
+ na_mii_check_speed ();
+
+ /* Delay 10 millisecond. (Maybe this should be 1 second.) */
+ udelay (10000);
+
+ /* Turn receive on.
+ Enable statistics register autozero on read.
+ Do not insert MAC address on transmit.
+ Do not enable special test modes. */
+ SET_EADDR (NETARM_ETH_STL_CFG,
+ (NETARM_ETH_STLC_AUTOZ | NETARM_ETH_STLC_RXEN));
+
+ /* Set the inter-packet gap delay to 0.96us for MII.
+ The NET+ARM H/W Reference Guide indicates that the Back-to-back IPG
+ Gap Timer Register should be set to 0x15 and the Non Back-to-back IPG
+ Gap Timer Register should be set to 0x00000C12 for the MII PHY. */
+ SET_EADDR (NETARM_ETH_B2B_IPG_GAP_TMR, 0x15);
+ SET_EADDR (NETARM_ETH_NB2B_IPG_GAP_TMR, 0x00000C12);
+
+ /* Add CRC to end of packets.
+ Pad packets to minimum length of 64 bytes.
+ Allow unlimited length transmit packets.
+ Receive all broadcast packets.
+ NOTE: Multicast addressing is NOT enabled here currently. */
+ SET_EADDR (NETARM_ETH_MAC_CFG,
+ (NETARM_ETH_MACC_CRCEN |
+ NETARM_ETH_MACC_PADEN | NETARM_ETH_MACC_HUGEN));
+ SET_EADDR (NETARM_ETH_SAL_FILTER, NETARM_ETH_SALF_BROAD);
+
+ /* enable fifos */
+ SET_EADDR (NETARM_ETH_GEN_CTRL,
+ (NETARM_ETH_GCR_ERX | NETARM_ETH_GCR_ETX));
+
+ return (0);
+}
+
+
+extern int eth_init (bd_t * bd)
+{
+ reset_eth ();
+ return 0;
+}
+
+extern void eth_halt (void)
+{
+ SET_EADDR (NETARM_ETH_GEN_CTRL, 0);
+}
+
+/* Get a data block via Ethernet */
+extern int eth_rx (void)
+{
+ int i;
+ unsigned short rxlen;
+ unsigned int *addr;
+ unsigned int rxstatus, lastrxlen;
+ char *pa;
+
+ /* RXBR is 1, data block was received */
+ if ((GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXBR) == 0)
+ return 0;
+
+ /* get status register and the length of received block */
+ rxstatus = GET_EADDR (NETARM_ETH_RX_STAT);
+ rxlen = (rxstatus & NETARM_ETH_RXSTAT_SIZE) >> 16;
+
+ if (rxlen == 0)
+ return 0;
+
+ /* clear RXBR to make fifo available */
+ SET_EADDR (NETARM_ETH_GEN_STAT,
+ GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_RXBR);
+
+ /* clear TXBC to make fifo available */
+ /* According to NETARM50 data manual you just have to clear
+ RXBR but that has no effect. Only after clearing TXBC the
+ Fifo becomes readable. */
+ SET_EADDR (NETARM_ETH_GEN_STAT,
+ GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_TXBC);
+
+ addr = (unsigned int *) NetRxPackets[0];
+ pa = (char *) NetRxPackets[0];
+
+ /* read the fifo */
+ for (i = 0; i < rxlen / 4; i++) {
+ *addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
+ addr++;
+ }
+
+ if (GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXREGR) {
+ /* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */
+ lastrxlen =
+ (GET_EADDR (NETARM_ETH_GEN_STAT) &
+ NETARM_ETH_GST_RXFDB) >> 28;
+ *addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
+ switch (lastrxlen) {
+ case 1:
+ *addr &= 0xff000000;
+ break;
+ case 2:
+ *addr &= 0xffff0000;
+ break;
+ case 3:
+ *addr &= 0xffffff00;
+ break;
+ }
+ }
+
+ /* Pass the packet up to the protocol layers. */
+ NetReceive (NetRxPackets[0], rxlen);
+
+ return rxlen;
+}
+
+/* Send a data block via Ethernet. */
+extern int eth_send (volatile void *packet, int length)
+{
+ int i, length32;
+ char *pa;
+ unsigned int *pa32, lastp = 0, rest;
+
+ pa = (char *) packet;
+ pa32 = (unsigned int *) packet;
+ length32 = length / 4;
+ rest = length % 4;
+
+ /* make sure there's no garbage in the last word */
+ switch (rest) {
+ case 0:
+ lastp = pa32[length32];
+ length32--;
+ break;
+ case 1:
+ lastp = pa32[length32] & 0x000000ff;
+ break;
+ case 2:
+ lastp = pa32[length32] & 0x0000ffff;
+ break;
+ case 3:
+ lastp = pa32[length32] & 0x00ffffff;
+ break;
+ }
+
+ /* write to the fifo */
+ for (i = 0; i < length32; i++)
+ SET_EADDR (NETARM_ETH_FIFO_DAT1, pa32[i]);
+
+ /* the last word is written to an extra register, this
+ starts the transmission */
+ SET_EADDR (NETARM_ETH_FIFO_DAT2, lastp);
+
+ /* NETARM_ETH_TXSTAT_TXOK should be checked, to know if the transmission
+ went fine. But we can't use the timer for a timeout loop because
+ of it is used already in upper layers. So we just try some times. */
+ i = 0;
+ while (i < 50000) {
+ if ((GET_EADDR (NETARM_ETH_TX_STAT) & NETARM_ETH_TXSTAT_TXOK)
+ == NETARM_ETH_TXSTAT_TXOK)
+ return 0;
+ i++;
+ }
+
+ printf ("eth_send timeout\n");
+ return 1;
+}
+
+#endif /* COMMANDS & CFG_NET */
+
+#endif /* CONFIG_DRIVER_NETARMETH */
diff --git a/drivers/net/netarm_eth.h b/drivers/net/netarm_eth.h
new file mode 100644
index 0000000..8edab82
--- /dev/null
+++ b/drivers/net/netarm_eth.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2003 IMMS gGmbH <www.imms.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * author(s): Thomas Elste, <info@elste.org>
+ */
+
+#include <asm/types.h>
+#include <config.h>
+
+#ifdef CONFIG_DRIVER_NETARMETH
+
+#define SET_EADDR(ad,val) *(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE) = val
+#define GET_EADDR(ad) (*(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE))
+
+#define NA_MII_POLL_BUSY_DELAY 900
+
+/* MII negotiation timeout value
+ 500 jiffies = 5 seconds */
+#define NA_MII_NEGOTIATE_DELAY 30
+
+/* Registers in the physical layer chip */
+#define MII_PHY_CONTROL 0
+#define MII_PHY_STATUS 1
+#define MII_PHY_ID 2
+#define MII_PHY_AUTONEGADV 4
+
+#endif /* CONFIG_DRIVER_NETARMETH */
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
new file mode 100644
index 0000000..69089f9
--- /dev/null
+++ b/drivers/net/netconsole.c
@@ -0,0 +1,267 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_NETCONSOLE
+
+#include <command.h>
+#include <devices.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static char input_buffer[512];
+static int input_size = 0; /* char count in input buffer */
+static int input_offset = 0; /* offset to valid chars in input buffer */
+static int input_recursion = 0;
+static int output_recursion = 0;
+static int net_timeout;
+static uchar nc_ether[6]; /* server enet address */
+static IPaddr_t nc_ip; /* server ip */
+static short nc_port; /* source/target port */
+static const char *output_packet; /* used by first send udp */
+static int output_packet_len = 0;
+
+static void nc_wait_arp_handler (uchar * pkt, unsigned dest, unsigned src,
+ unsigned len)
+{
+ NetState = NETLOOP_SUCCESS; /* got arp reply - quit net loop */
+}
+
+static void nc_handler (uchar * pkt, unsigned dest, unsigned src,
+ unsigned len)
+{
+ if (input_size)
+ NetState = NETLOOP_SUCCESS; /* got input - quit net loop */
+}
+
+static void nc_timeout (void)
+{
+ NetState = NETLOOP_SUCCESS;
+}
+
+void NcStart (void)
+{
+ if (!output_packet_len || memcmp (nc_ether, NetEtherNullAddr, 6)) {
+ /* going to check for input packet */
+ NetSetHandler (nc_handler);
+ NetSetTimeout (net_timeout, nc_timeout);
+ } else {
+ /* send arp request */
+ uchar *pkt;
+ NetSetHandler (nc_wait_arp_handler);
+ pkt = (uchar *) NetTxPacket + NetEthHdrSize () + IP_HDR_SIZE;
+ memcpy (pkt, output_packet, output_packet_len);
+ NetSendUDPPacket (nc_ether, nc_ip, nc_port, nc_port, output_packet_len);
+ }
+}
+
+int nc_input_packet (uchar * pkt, unsigned dest, unsigned src, unsigned len)
+{
+ int end, chunk;
+
+ if (dest != nc_port || !len)
+ return 0; /* not for us */
+
+ if (input_size == sizeof input_buffer)
+ return 1; /* no space */
+ if (len > sizeof input_buffer - input_size)
+ len = sizeof input_buffer - input_size;
+
+ end = input_offset + input_size;
+ if (end > sizeof input_buffer)
+ end -= sizeof input_buffer;
+
+ chunk = len;
+ if (end + len > sizeof input_buffer) {
+ chunk = sizeof input_buffer - end;
+ memcpy(input_buffer, pkt + chunk, len - chunk);
+ }
+ memcpy (input_buffer + end, pkt, chunk);
+
+ input_size += len;
+
+ return 1;
+}
+
+static void nc_send_packet (const char *buf, int len)
+{
+ struct eth_device *eth;
+ int inited = 0;
+ uchar *pkt;
+ uchar *ether;
+ IPaddr_t ip;
+
+ if ((eth = eth_get_dev ()) == NULL) {
+ return;
+ }
+
+ if (!memcmp (nc_ether, NetEtherNullAddr, 6)) {
+ if (eth->state == ETH_STATE_ACTIVE)
+ return; /* inside net loop */
+ output_packet = buf;
+ output_packet_len = len;
+ NetLoop (NETCONS); /* wait for arp reply and send packet */
+ output_packet_len = 0;
+ return;
+ }
+
+ if (eth->state != ETH_STATE_ACTIVE) {
+ if (eth_init (gd->bd) < 0)
+ return;
+ inited = 1;
+ }
+ pkt = (uchar *) NetTxPacket + NetEthHdrSize () + IP_HDR_SIZE;
+ memcpy (pkt, buf, len);
+ ether = nc_ether;
+ ip = nc_ip;
+ NetSendUDPPacket (ether, ip, nc_port, nc_port, len);
+
+ if (inited)
+ eth_halt ();
+}
+
+int nc_start (void)
+{
+ int netmask, our_ip;
+
+ nc_port = 6666; /* default port */
+
+ if (getenv ("ncip")) {
+ char *p;
+
+ nc_ip = getenv_IPaddr ("ncip");
+ if (!nc_ip)
+ return -1; /* ncip is 0.0.0.0 */
+ if ((p = strchr (getenv ("ncip"), ':')) != NULL)
+ nc_port = simple_strtoul (p + 1, NULL, 10);
+ } else
+ nc_ip = ~0; /* ncip is not set */
+
+ our_ip = getenv_IPaddr ("ipaddr");
+ netmask = getenv_IPaddr ("netmask");
+
+ if (nc_ip == ~0 || /* 255.255.255.255 */
+ ((netmask & our_ip) == (netmask & nc_ip) && /* on the same net */
+ (netmask | nc_ip) == ~0)) /* broadcast to our net */
+ memset (nc_ether, 0xff, sizeof nc_ether);
+ else
+ memset (nc_ether, 0, sizeof nc_ether); /* force arp request */
+
+ return 0;
+}
+
+void nc_putc (char c)
+{
+ if (output_recursion)
+ return;
+ output_recursion = 1;
+
+ nc_send_packet (&c, 1);
+
+ output_recursion = 0;
+}
+
+void nc_puts (const char *s)
+{
+ int len;
+
+ if (output_recursion)
+ return;
+ output_recursion = 1;
+
+ if ((len = strlen (s)) > 512)
+ len = 512;
+
+ nc_send_packet (s, len);
+
+ output_recursion = 0;
+}
+
+int nc_getc (void)
+{
+ uchar c;
+
+ input_recursion = 1;
+
+ net_timeout = 0; /* no timeout */
+ while (!input_size)
+ NetLoop (NETCONS);
+
+ input_recursion = 0;
+
+ c = input_buffer[input_offset++];
+
+ if (input_offset >= sizeof input_buffer)
+ input_offset -= sizeof input_buffer;
+ input_size--;
+
+ return c;
+}
+
+int nc_tstc (void)
+{
+ struct eth_device *eth;
+
+ if (input_recursion)
+ return 0;
+
+ if (input_size)
+ return 1;
+
+ eth = eth_get_dev ();
+ if (eth && eth->state == ETH_STATE_ACTIVE)
+ return 0; /* inside net loop */
+
+ input_recursion = 1;
+
+ net_timeout = 1;
+ NetLoop (NETCONS); /* kind of poll */
+
+ input_recursion = 0;
+
+ return input_size != 0;
+}
+
+int drv_nc_init (void)
+{
+ device_t dev;
+ int rc;
+
+ memset (&dev, 0, sizeof (dev));
+
+ strcpy (dev.name, "nc");
+ dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
+ dev.start = nc_start;
+ dev.putc = nc_putc;
+ dev.puts = nc_puts;
+ dev.getc = nc_getc;
+ dev.tstc = nc_tstc;
+
+ rc = device_register (&dev);
+
+ return (rc == 0) ? 1 : rc;
+}
+
+#endif /* CONFIG_NETCONSOLE */
diff --git a/drivers/net/nicext.h b/drivers/net/nicext.h
new file mode 100644
index 0000000..4074972
--- /dev/null
+++ b/drivers/net/nicext.h
@@ -0,0 +1,109 @@
+/****************************************************************************
+ * Copyright(c) 2000-2001 Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Name: nicext.h
+ *
+ * Description: Broadcom Network Interface Card Extension (NICE) is an
+ * extension to Linux NET device kernel mode drivers.
+ * NICE is designed to provide additional functionalities,
+ * such as receive packet intercept. To support Broadcom NICE,
+ * the network device driver can be modified by adding an
+ * device ioctl handler and by indicating receiving packets
+ * to the NICE receive handler. Broadcom NICE will only be
+ * enabled by a NICE-aware intermediate driver, such as
+ * Broadcom Advanced Server Program Driver (BASP). When NICE
+ * is not enabled, the modified network device drivers
+ * functions exactly as other non-NICE aware drivers.
+ *
+ * Author: Frankie Fan
+ *
+ * Created: September 17, 2000
+ *
+ ****************************************************************************/
+#ifndef _nicext_h_
+#define _nicext_h_
+
+/*
+ * ioctl for NICE
+ */
+#define SIOCNICE SIOCDEVPRIVATE+7
+
+/*
+ * SIOCNICE:
+ *
+ * The following structure needs to be less than IFNAMSIZ (16 bytes) because
+ * we're overloading ifreq.ifr_ifru.
+ *
+ * If 16 bytes is not enough, we should consider relaxing this because
+ * this is no field after ifr_ifru in the ifreq structure. But we may
+ * run into future compatiability problem in case of changing struct ifreq.
+ */
+struct nice_req
+{
+ __u32 cmd;
+
+ union
+ {
+#ifdef __KERNEL__
+ /* cmd = NICE_CMD_SET_RX or NICE_CMD_GET_RX */
+ struct
+ {
+ void (*nrqus1_rx)( struct sk_buff*, void* );
+ void* nrqus1_ctx;
+ } nrqu_nrqus1;
+
+ /* cmd = NICE_CMD_QUERY_SUPPORT */
+ struct
+ {
+ __u32 nrqus2_magic;
+ __u32 nrqus2_support_rx:1;
+ __u32 nrqus2_support_vlan:1;
+ __u32 nrqus2_support_get_speed:1;
+ } nrqu_nrqus2;
+#endif
+
+ /* cmd = NICE_CMD_GET_SPEED */
+ struct
+ {
+ unsigned int nrqus3_speed; /* 0 if link is down, */
+ /* otherwise speed in Mbps */
+ } nrqu_nrqus3;
+
+ /* cmd = NICE_CMD_BLINK_LED */
+ struct
+ {
+ unsigned int nrqus4_blink_time; /* blink duration in seconds */
+ } nrqu_nrqus4;
+
+ } nrq_nrqu;
+};
+
+#define nrq_rx nrq_nrqu.nrqu_nrqus1.nrqus1_rx
+#define nrq_ctx nrq_nrqu.nrqu_nrqus1.nrqus1_ctx
+#define nrq_support_rx nrq_nrqu.nrqu_nrqus2.nrqus2_support_rx
+#define nrq_magic nrq_nrqu.nrqu_nrqus2.nrqus2_magic
+#define nrq_support_vlan nrq_nrqu.nrqu_nrqus2.nrqus2_support_vlan
+#define nrq_support_get_speed nrq_nrqu.nrqu_nrqus2.nrqus2_support_get_speed
+#define nrq_speed nrq_nrqu.nrqu_nrqus3.nrqus3_speed
+#define nrq_blink_time nrq_nrqu.nrqu_nrqus4.nrqus4_blink_time
+
+/*
+ * magic constants
+ */
+#define NICE_REQUESTOR_MAGIC 0x4543494E /* NICE in ascii */
+#define NICE_DEVICE_MAGIC 0x4E494345 /* ECIN in ascii */
+
+/*
+ * command field
+ */
+#define NICE_CMD_QUERY_SUPPORT 0x00000001
+#define NICE_CMD_SET_RX 0x00000002
+#define NICE_CMD_GET_RX 0x00000003
+#define NICE_CMD_GET_SPEED 0x00000004
+#define NICE_CMD_BLINK_LED 0x00000005
+
+#endif /* _nicext_h_ */
diff --git a/drivers/net/ns7520_eth.c b/drivers/net/ns7520_eth.c
new file mode 100644
index 0000000..a5a20df
--- /dev/null
+++ b/drivers/net/ns7520_eth.c
@@ -0,0 +1,859 @@
+/***********************************************************************
+ *
+ * Copyright (C) 2005 by Videon Central, Inc.
+ *
+ * $Id$
+ * @Author: Arthur Shipkowski
+ * @Descr: Ethernet driver for the NS7520. Uses polled Ethernet, like
+ * the older netarmeth driver. Note that attempting to filter
+ * broadcast and multicast out in the SAFR register will cause
+ * bad things due to released errata.
+ * @References: [1] NS7520 Hardware Reference, December 2003
+ * [2] Intel LXT971 Datasheet #249414 Rev. 02
+ *
+ ***********************************************************************/
+
+#include <common.h>
+
+#if defined(CONFIG_DRIVER_NS7520_ETHERNET)
+
+#include <net.h> /* NetSendPacket */
+#include <asm/arch/netarm_registers.h>
+#include <asm/arch/netarm_dma_module.h>
+
+#include "ns7520_eth.h" /* for Ethernet and PHY */
+
+/**
+ * Send an error message to the terminal.
+ */
+#define ERROR(x) \
+do { \
+ char *__foo = strrchr(__FILE__, '/'); \
+ \
+ printf("%s: %d: %s(): ", (__foo == NULL ? __FILE__ : (__foo + 1)), \
+ __LINE__, __FUNCTION__); \
+ printf x; printf("\n"); \
+} while (0);
+
+/* some definition to make transistion to linux easier */
+
+#define NS7520_DRIVER_NAME "eth"
+#define KERN_WARNING "Warning:"
+#define KERN_ERR "Error:"
+#define KERN_INFO "Info:"
+
+#if 1
+# define DEBUG
+#endif
+
+#ifdef DEBUG
+# define printk printf
+
+# define DEBUG_INIT 0x0001
+# define DEBUG_MINOR 0x0002
+# define DEBUG_RX 0x0004
+# define DEBUG_TX 0x0008
+# define DEBUG_INT 0x0010
+# define DEBUG_POLL 0x0020
+# define DEBUG_LINK 0x0040
+# define DEBUG_MII 0x0100
+# define DEBUG_MII_LOW 0x0200
+# define DEBUG_MEM 0x0400
+# define DEBUG_ERROR 0x4000
+# define DEBUG_ERROR_CRIT 0x8000
+
+static int nDebugLvl = DEBUG_ERROR_CRIT;
+
+# define DEBUG_ARGS0( FLG, a0 ) if( ( nDebugLvl & (FLG) ) == (FLG) ) \
+ printf("%s: " a0, __FUNCTION__, 0, 0, 0, 0, 0, 0 )
+# define DEBUG_ARGS1( FLG, a0, a1 ) if( ( nDebugLvl & (FLG) ) == (FLG)) \
+ printf("%s: " a0, __FUNCTION__, (int)(a1), 0, 0, 0, 0, 0 )
+# define DEBUG_ARGS2( FLG, a0, a1, a2 ) if( (nDebugLvl & (FLG)) ==(FLG))\
+ printf("%s: " a0, __FUNCTION__, (int)(a1), (int)(a2), 0, 0,0,0 )
+# define DEBUG_ARGS3( FLG, a0, a1, a2, a3 ) if((nDebugLvl &(FLG))==(FLG))\
+ printf("%s: "a0,__FUNCTION__,(int)(a1),(int)(a2),(int)(a3),0,0,0)
+# define DEBUG_FN( FLG ) if( (nDebugLvl & (FLG)) == (FLG) ) \
+ printf("\r%s:line %d\n", (int)__FUNCTION__, __LINE__, 0,0,0,0);
+# define ASSERT( expr, func ) if( !( expr ) ) { \
+ printf( "Assertion failed! %s:line %d %s\n", \
+ (int)__FUNCTION__,__LINE__,(int)(#expr),0,0,0); \
+ func }
+#else /* DEBUG */
+# define printk(...)
+# define DEBUG_ARGS0( FLG, a0 )
+# define DEBUG_ARGS1( FLG, a0, a1 )
+# define DEBUG_ARGS2( FLG, a0, a1, a2 )
+# define DEBUG_ARGS3( FLG, a0, a1, a2, a3 )
+# define DEBUG_FN( n )
+# define ASSERT(expr, func)
+#endif /* DEBUG */
+
+#define NS7520_MII_NEG_DELAY (5*CFG_HZ) /* in s */
+#define TX_TIMEOUT (5*CFG_HZ) /* in s */
+#define RX_STALL_WORKAROUND_CNT 100
+
+static int ns7520_eth_reset(void);
+
+static void ns7520_link_auto_negotiate(void);
+static void ns7520_link_update_egcr(void);
+static void ns7520_link_print_changed(void);
+
+/* the PHY stuff */
+
+static char ns7520_mii_identify_phy(void);
+static unsigned short ns7520_mii_read(unsigned short uiRegister);
+static void ns7520_mii_write(unsigned short uiRegister,
+ unsigned short uiData);
+static unsigned int ns7520_mii_get_clock_divisor(unsigned int
+ unMaxMDIOClk);
+static unsigned int ns7520_mii_poll_busy(void);
+
+static unsigned int nPhyMaxMdioClock = PHY_MDIO_MAX_CLK;
+static unsigned int uiLastLinkStatus;
+static PhyType phyDetected = PHY_NONE;
+
+/***********************************************************************
+ * @Function: eth_init
+ * @Return: -1 on failure otherwise 0
+ * @Descr: Initializes the ethernet engine and uses either FS Forth's default
+ * MAC addr or the one in environment
+ ***********************************************************************/
+
+int eth_init(bd_t * pbis)
+{
+ unsigned char aucMACAddr[6];
+ char *pcTmp = getenv("ethaddr");
+ char *pcEnd;
+ int i;
+
+ DEBUG_FN(DEBUG_INIT);
+
+ /* no need to check for hardware */
+
+ if (!ns7520_eth_reset())
+ return -1;
+
+ if (NULL == pcTmp)
+ return -1;
+
+ for (i = 0; i < 6; i++) {
+ aucMACAddr[i] =
+ pcTmp ? simple_strtoul(pcTmp, &pcEnd, 16) : 0;
+ pcTmp = (*pcTmp) ? pcEnd + 1 : pcEnd;
+ }
+
+ /* configure ethernet address */
+
+ *get_eth_reg_addr(NS7520_ETH_SA1) =
+ aucMACAddr[5] << 8 | aucMACAddr[4];
+ *get_eth_reg_addr(NS7520_ETH_SA2) =
+ aucMACAddr[3] << 8 | aucMACAddr[2];
+ *get_eth_reg_addr(NS7520_ETH_SA3) =
+ aucMACAddr[1] << 8 | aucMACAddr[0];
+
+ /* enable hardware */
+
+ *get_eth_reg_addr(NS7520_ETH_MAC1) = NS7520_ETH_MAC1_RXEN;
+ *get_eth_reg_addr(NS7520_ETH_SUPP) = NS7520_ETH_SUPP_JABBER;
+ *get_eth_reg_addr(NS7520_ETH_MAC1) = NS7520_ETH_MAC1_RXEN;
+
+ /* the linux kernel may give packets < 60 bytes, for example arp */
+ *get_eth_reg_addr(NS7520_ETH_MAC2) = NS7520_ETH_MAC2_CRCEN |
+ NS7520_ETH_MAC2_PADEN | NS7520_ETH_MAC2_HUGE;
+
+ /* Broadcast/multicast allowed; if you don't set this even unicast chokes */
+ /* Based on NS7520 errata documentation */
+ *get_eth_reg_addr(NS7520_ETH_SAFR) =
+ NS7520_ETH_SAFR_BROAD | NS7520_ETH_SAFR_PRM;
+
+ /* enable receive and transmit FIFO, use 10/100 Mbps MII */
+ *get_eth_reg_addr(NS7520_ETH_EGCR) |=
+ NS7520_ETH_EGCR_ETXWM_75 |
+ NS7520_ETH_EGCR_ERX |
+ NS7520_ETH_EGCR_ERXREG |
+ NS7520_ETH_EGCR_ERXBR | NS7520_ETH_EGCR_ETX;
+
+ return 0;
+}
+
+/***********************************************************************
+ * @Function: eth_send
+ * @Return: -1 on timeout otherwise 1
+ * @Descr: sends one frame by DMA
+ ***********************************************************************/
+
+int eth_send(volatile void *pPacket, int nLen)
+{
+ int i, length32, retval = 1;
+ char *pa;
+ unsigned int *pa32, lastp = 0, rest;
+ unsigned int status;
+
+ pa = (char *) pPacket;
+ pa32 = (unsigned int *) pPacket;
+ length32 = nLen / 4;
+ rest = nLen % 4;
+
+ /* make sure there's no garbage in the last word */
+ switch (rest) {
+ case 0:
+ lastp = pa32[length32 - 1];
+ length32--;
+ break;
+ case 1:
+ lastp = pa32[length32] & 0x000000ff;
+ break;
+ case 2:
+ lastp = pa32[length32] & 0x0000ffff;
+ break;
+ case 3:
+ lastp = pa32[length32] & 0x00ffffff;
+ break;
+ }
+
+ while (((*get_eth_reg_addr(NS7520_ETH_EGSR)) &
+ NS7520_ETH_EGSR_TXREGE)
+ == 0) {
+ }
+
+ /* write to the fifo */
+ for (i = 0; i < length32; i++)
+ *get_eth_reg_addr(NS7520_ETH_FIFO) = pa32[i];
+
+ /* the last word is written to an extra register, this
+ starts the transmission */
+ *get_eth_reg_addr(NS7520_ETH_FIFOL) = lastp;
+
+ /* Wait for it to be done */
+ while ((*get_eth_reg_addr(NS7520_ETH_EGSR) & NS7520_ETH_EGSR_TXBC)
+ == 0) {
+ }
+ status = (*get_eth_reg_addr(NS7520_ETH_ETSR));
+ *get_eth_reg_addr(NS7520_ETH_EGSR) = NS7520_ETH_EGSR_TXBC; /* Clear it now */
+
+ if (status & NS7520_ETH_ETSR_TXOK) {
+ retval = 0; /* We're OK! */
+ } else if (status & NS7520_ETH_ETSR_TXDEF) {
+ printf("Deferred, we'll see.\n");
+ retval = 0;
+ } else if (status & NS7520_ETH_ETSR_TXAL) {
+ printf("Late collision error, %d collisions.\n",
+ (*get_eth_reg_addr(NS7520_ETH_ETSR)) &
+ NS7520_ETH_ETSR_TXCOLC);
+ } else if (status & NS7520_ETH_ETSR_TXAEC) {
+ printf("Excessive collisions: %d\n",
+ (*get_eth_reg_addr(NS7520_ETH_ETSR)) &
+ NS7520_ETH_ETSR_TXCOLC);
+ } else if (status & NS7520_ETH_ETSR_TXAED) {
+ printf("Excessive deferral on xmit.\n");
+ } else if (status & NS7520_ETH_ETSR_TXAUR) {
+ printf("Packet underrun.\n");
+ } else if (status & NS7520_ETH_ETSR_TXAJ) {
+ printf("Jumbo packet error.\n");
+ } else {
+ printf("Error: Should never get here.\n");
+ }
+
+ return (retval);
+}
+
+/***********************************************************************
+ * @Function: eth_rx
+ * @Return: size of last frame in bytes or 0 if no frame available
+ * @Descr: gives one frame to U-Boot which has been copied by DMA engine already
+ * to NetRxPackets[ 0 ].
+ ***********************************************************************/
+
+int eth_rx(void)
+{
+ int i;
+ unsigned short rxlen;
+ unsigned short totrxlen = 0;
+ unsigned int *addr;
+ unsigned int rxstatus, lastrxlen;
+ char *pa;
+
+ /* If RXBR is 1, data block was received */
+ while (((*get_eth_reg_addr(NS7520_ETH_EGSR)) &
+ NS7520_ETH_EGSR_RXBR) == NS7520_ETH_EGSR_RXBR) {
+
+ /* get status register and the length of received block */
+ rxstatus = *get_eth_reg_addr(NS7520_ETH_ERSR);
+ rxlen = (rxstatus & NS7520_ETH_ERSR_RXSIZE) >> 16;
+
+ /* clear RXBR to make fifo available */
+ *get_eth_reg_addr(NS7520_ETH_EGSR) = NS7520_ETH_EGSR_RXBR;
+
+ if (rxstatus & NS7520_ETH_ERSR_ROVER) {
+ printf("Receive overrun, resetting FIFO.\n");
+ *get_eth_reg_addr(NS7520_ETH_EGCR) &=
+ ~NS7520_ETH_EGCR_ERX;
+ udelay(20);
+ *get_eth_reg_addr(NS7520_ETH_EGCR) |=
+ NS7520_ETH_EGCR_ERX;
+ }
+ if (rxlen == 0) {
+ printf("Nothing.\n");
+ return 0;
+ }
+
+ addr = (unsigned int *) NetRxPackets[0];
+ pa = (char *) NetRxPackets[0];
+
+ /* read the fifo */
+ for (i = 0; i < rxlen / 4; i++) {
+ *addr = *get_eth_reg_addr(NS7520_ETH_FIFO);
+ addr++;
+ }
+
+ if ((*get_eth_reg_addr(NS7520_ETH_EGSR)) &
+ NS7520_ETH_EGSR_RXREGR) {
+ /* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */
+ lastrxlen =
+ ((*get_eth_reg_addr(NS7520_ETH_EGSR)) &
+ NS7520_ETH_EGSR_RXFDB_MA) >> 28;
+ *addr = *get_eth_reg_addr(NS7520_ETH_FIFO);
+ switch (lastrxlen) {
+ case 1:
+ *addr &= 0xff000000;
+ break;
+ case 2:
+ *addr &= 0xffff0000;
+ break;
+ case 3:
+ *addr &= 0xffffff00;
+ break;
+ }
+ }
+
+ /* Pass the packet up to the protocol layers. */
+ NetReceive(NetRxPackets[0], rxlen - 4);
+ totrxlen += rxlen - 4;
+ }
+
+ return totrxlen;
+}
+
+/***********************************************************************
+ * @Function: eth_halt
+ * @Return: n/a
+ * @Descr: stops the ethernet engine
+ ***********************************************************************/
+
+void eth_halt(void)
+{
+ DEBUG_FN(DEBUG_INIT);
+
+ *get_eth_reg_addr(NS7520_ETH_MAC1) &= ~NS7520_ETH_MAC1_RXEN;
+ *get_eth_reg_addr(NS7520_ETH_EGCR) &= ~(NS7520_ETH_EGCR_ERX |
+ NS7520_ETH_EGCR_ERXDMA |
+ NS7520_ETH_EGCR_ERXREG |
+ NS7520_ETH_EGCR_ERXBR |
+ NS7520_ETH_EGCR_ETX |
+ NS7520_ETH_EGCR_ETXDMA);
+}
+
+/***********************************************************************
+ * @Function: ns7520_eth_reset
+ * @Return: 0 on failure otherwise 1
+ * @Descr: resets the ethernet interface and the PHY,
+ * performs auto negotiation or fixed modes
+ ***********************************************************************/
+
+static int ns7520_eth_reset(void)
+{
+ DEBUG_FN(DEBUG_MINOR);
+
+ /* Reset important registers */
+ *get_eth_reg_addr(NS7520_ETH_EGCR) = 0; /* Null it out! */
+ *get_eth_reg_addr(NS7520_ETH_MAC1) &= NS7520_ETH_MAC1_SRST;
+ *get_eth_reg_addr(NS7520_ETH_MAC2) = 0;
+ /* Reset MAC */
+ *get_eth_reg_addr(NS7520_ETH_EGCR) |= NS7520_ETH_EGCR_MAC_RES;
+ udelay(5);
+ *get_eth_reg_addr(NS7520_ETH_EGCR) &= ~NS7520_ETH_EGCR_MAC_RES;
+
+ /* reset and initialize PHY */
+
+ *get_eth_reg_addr(NS7520_ETH_MAC1) &= ~NS7520_ETH_MAC1_SRST;
+
+ /* we don't support hot plugging of PHY, therefore we don't reset
+ phyDetected and nPhyMaxMdioClock here. The risk is if the setting is
+ incorrect the first open
+ may detect the PHY correctly but succeding will fail
+ For reseting the PHY and identifying we have to use the standard
+ MDIO CLOCK value 2.5 MHz only after hardware reset
+ After having identified the PHY we will do faster */
+
+ *get_eth_reg_addr(NS7520_ETH_MCFG) =
+ ns7520_mii_get_clock_divisor(nPhyMaxMdioClock);
+
+ /* reset PHY */
+ ns7520_mii_write(PHY_COMMON_CTRL, PHY_COMMON_CTRL_RESET);
+ ns7520_mii_write(PHY_COMMON_CTRL, 0);
+
+ udelay(3000); /* [2] p.70 says at least 300us reset recovery time. */
+
+ /* MII clock has been setup to default, ns7520_mii_identify_phy should
+ work for all */
+
+ if (!ns7520_mii_identify_phy()) {
+ printk(KERN_ERR NS7520_DRIVER_NAME
+ ": Unsupported PHY, aborting\n");
+ return 0;
+ }
+
+ /* now take the highest MDIO clock possible after detection */
+ *get_eth_reg_addr(NS7520_ETH_MCFG) =
+ ns7520_mii_get_clock_divisor(nPhyMaxMdioClock);
+
+ /* PHY has been detected, so there can be no abort reason and we can
+ finish initializing ethernet */
+
+ uiLastLinkStatus = 0xff; /* undefined */
+
+ ns7520_link_auto_negotiate();
+
+ if (phyDetected == PHY_LXT971A)
+ /* set LED2 to link mode */
+ ns7520_mii_write(PHY_LXT971_LED_CFG,
+ (PHY_LXT971_LED_CFG_LINK_ACT <<
+ PHY_LXT971_LED_CFG_SHIFT_LED2) |
+ (PHY_LXT971_LED_CFG_TRANSMIT <<
+ PHY_LXT971_LED_CFG_SHIFT_LED1));
+
+ return 1;
+}
+
+/***********************************************************************
+ * @Function: ns7520_link_auto_negotiate
+ * @Return: void
+ * @Descr: performs auto-negotation of link.
+ ***********************************************************************/
+
+static void ns7520_link_auto_negotiate(void)
+{
+ unsigned long ulStartJiffies;
+ unsigned short uiStatus;
+
+ DEBUG_FN(DEBUG_LINK);
+
+ /* run auto-negotation */
+ /* define what we are capable of */
+ ns7520_mii_write(PHY_COMMON_AUTO_ADV,
+ PHY_COMMON_AUTO_ADV_100BTXFD |
+ PHY_COMMON_AUTO_ADV_100BTX |
+ PHY_COMMON_AUTO_ADV_10BTFD |
+ PHY_COMMON_AUTO_ADV_10BT |
+ PHY_COMMON_AUTO_ADV_802_3);
+ /* start auto-negotiation */
+ ns7520_mii_write(PHY_COMMON_CTRL,
+ PHY_COMMON_CTRL_AUTO_NEG |
+ PHY_COMMON_CTRL_RES_AUTO);
+
+ /* wait for completion */
+
+ ulStartJiffies = get_timer(0);
+ while (get_timer(0) < ulStartJiffies + NS7520_MII_NEG_DELAY) {
+ uiStatus = ns7520_mii_read(PHY_COMMON_STAT);
+ if ((uiStatus &
+ (PHY_COMMON_STAT_AN_COMP | PHY_COMMON_STAT_LNK_STAT))
+ ==
+ (PHY_COMMON_STAT_AN_COMP | PHY_COMMON_STAT_LNK_STAT)) {
+ /* lucky we are, auto-negotiation succeeded */
+ ns7520_link_print_changed();
+ ns7520_link_update_egcr();
+ return;
+ }
+ }
+
+ DEBUG_ARGS0(DEBUG_LINK, "auto-negotiation timed out\n");
+ /* ignore invalid link settings */
+}
+
+/***********************************************************************
+ * @Function: ns7520_link_update_egcr
+ * @Return: void
+ * @Descr: updates the EGCR and MAC2 link status after mode change or
+ * auto-negotation
+ ***********************************************************************/
+
+static void ns7520_link_update_egcr(void)
+{
+ unsigned int unEGCR;
+ unsigned int unMAC2;
+ unsigned int unIPGT;
+
+ DEBUG_FN(DEBUG_LINK);
+
+ unEGCR = *get_eth_reg_addr(NS7520_ETH_EGCR);
+ unMAC2 = *get_eth_reg_addr(NS7520_ETH_MAC2);
+ unIPGT =
+ *get_eth_reg_addr(NS7520_ETH_IPGT) & ~NS7520_ETH_IPGT_IPGT;
+
+ unEGCR &= ~NS7520_ETH_EGCR_EFULLD;
+ unMAC2 &= ~NS7520_ETH_MAC2_FULLD;
+ if ((uiLastLinkStatus & PHY_LXT971_STAT2_DUPLEX_MODE)
+ == PHY_LXT971_STAT2_DUPLEX_MODE) {
+ unEGCR |= NS7520_ETH_EGCR_EFULLD;
+ unMAC2 |= NS7520_ETH_MAC2_FULLD;
+ unIPGT |= 0x15; /* see [1] p. 167 */
+ } else
+ unIPGT |= 0x12; /* see [1] p. 167 */
+
+ *get_eth_reg_addr(NS7520_ETH_MAC2) = unMAC2;
+ *get_eth_reg_addr(NS7520_ETH_EGCR) = unEGCR;
+ *get_eth_reg_addr(NS7520_ETH_IPGT) = unIPGT;
+}
+
+/***********************************************************************
+ * @Function: ns7520_link_print_changed
+ * @Return: void
+ * @Descr: checks whether the link status has changed and if so prints
+ * the new mode
+ ***********************************************************************/
+
+static void ns7520_link_print_changed(void)
+{
+ unsigned short uiStatus;
+ unsigned short uiControl;
+
+ DEBUG_FN(DEBUG_LINK);
+
+ uiControl = ns7520_mii_read(PHY_COMMON_CTRL);
+
+ if ((uiControl & PHY_COMMON_CTRL_AUTO_NEG) ==
+ PHY_COMMON_CTRL_AUTO_NEG) {
+ /* PHY_COMMON_STAT_LNK_STAT is only set on autonegotiation */
+ uiStatus = ns7520_mii_read(PHY_COMMON_STAT);
+
+ if (!(uiStatus & PHY_COMMON_STAT_LNK_STAT)) {
+ printk(KERN_WARNING NS7520_DRIVER_NAME
+ ": link down\n");
+ /* @TODO Linux: carrier_off */
+ } else {
+ /* @TODO Linux: carrier_on */
+ if (phyDetected == PHY_LXT971A) {
+ uiStatus =
+ ns7520_mii_read(PHY_LXT971_STAT2);
+ uiStatus &=
+ (PHY_LXT971_STAT2_100BTX |
+ PHY_LXT971_STAT2_DUPLEX_MODE |
+ PHY_LXT971_STAT2_AUTO_NEG);
+
+ /* mask out all uninteresting parts */
+ }
+ /* other PHYs must store there link information in
+ uiStatus as PHY_LXT971 */
+ }
+ } else {
+ /* mode has been forced, so uiStatus should be the same as the
+ last link status, enforce printing */
+ uiStatus = uiLastLinkStatus;
+ uiLastLinkStatus = 0xff;
+ }
+
+ if (uiStatus != uiLastLinkStatus) {
+ /* save current link status */
+ uiLastLinkStatus = uiStatus;
+
+ /* print new link status */
+
+ printk(KERN_INFO NS7520_DRIVER_NAME
+ ": link mode %i Mbps %s duplex %s\n",
+ (uiStatus & PHY_LXT971_STAT2_100BTX) ? 100 : 10,
+ (uiStatus & PHY_LXT971_STAT2_DUPLEX_MODE) ? "full" :
+ "half",
+ (uiStatus & PHY_LXT971_STAT2_AUTO_NEG) ? "(auto)" :
+ "");
+ }
+}
+
+/***********************************************************************
+ * the MII low level stuff
+ ***********************************************************************/
+
+/***********************************************************************
+ * @Function: ns7520_mii_identify_phy
+ * @Return: 1 if supported PHY has been detected otherwise 0
+ * @Descr: checks for supported PHY and prints the IDs.
+ ***********************************************************************/
+
+static char ns7520_mii_identify_phy(void)
+{
+ unsigned short uiID1;
+ unsigned short uiID2;
+ unsigned char *szName;
+ char cRes = 0;
+
+ DEBUG_FN(DEBUG_MII);
+
+ phyDetected = (PhyType) uiID1 = ns7520_mii_read(PHY_COMMON_ID1);
+
+ switch (phyDetected) {
+ case PHY_LXT971A:
+ szName = "LXT971A";
+ uiID2 = ns7520_mii_read(PHY_COMMON_ID2);
+ nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK;
+ cRes = 1;
+ break;
+ case PHY_NONE:
+ default:
+ /* in case uiID1 == 0 && uiID2 == 0 we may have the wrong
+ address or reset sets the wrong NS7520_ETH_MCFG_CLKS */
+
+ uiID2 = 0;
+ szName = "unknown";
+ nPhyMaxMdioClock = PHY_MDIO_MAX_CLK;
+ phyDetected = PHY_NONE;
+ }
+
+ printk(KERN_INFO NS7520_DRIVER_NAME
+ ": PHY (0x%x, 0x%x) = %s detected\n", uiID1, uiID2, szName);
+
+ return cRes;
+}
+
+/***********************************************************************
+ * @Function: ns7520_mii_read
+ * @Return: the data read from PHY register uiRegister
+ * @Descr: the data read may be invalid if timed out. If so, a message
+ * is printed but the invalid data is returned.
+ * The fixed device address is being used.
+ ***********************************************************************/
+
+static unsigned short ns7520_mii_read(unsigned short uiRegister)
+{
+ DEBUG_FN(DEBUG_MII_LOW);
+
+ /* write MII register to be read */
+ *get_eth_reg_addr(NS7520_ETH_MADR) =
+ CONFIG_PHY_ADDR << 8 | uiRegister;
+
+ *get_eth_reg_addr(NS7520_ETH_MCMD) = NS7520_ETH_MCMD_READ;
+
+ if (!ns7520_mii_poll_busy())
+ printk(KERN_WARNING NS7520_DRIVER_NAME
+ ": MII still busy in read\n");
+ /* continue to read */
+
+ *get_eth_reg_addr(NS7520_ETH_MCMD) = 0;
+
+ return (unsigned short) (*get_eth_reg_addr(NS7520_ETH_MRDD));
+}
+
+/***********************************************************************
+ * @Function: ns7520_mii_write
+ * @Return: nothing
+ * @Descr: writes the data to the PHY register. In case of a timeout,
+ * no special handling is performed but a message printed
+ * The fixed device address is being used.
+ ***********************************************************************/
+
+static void ns7520_mii_write(unsigned short uiRegister,
+ unsigned short uiData)
+{
+ DEBUG_FN(DEBUG_MII_LOW);
+
+ /* write MII register to be written */
+ *get_eth_reg_addr(NS7520_ETH_MADR) =
+ CONFIG_PHY_ADDR << 8 | uiRegister;
+
+ *get_eth_reg_addr(NS7520_ETH_MWTD) = uiData;
+
+ if (!ns7520_mii_poll_busy()) {
+ printf(KERN_WARNING NS7520_DRIVER_NAME
+ ": MII still busy in write\n");
+ }
+}
+
+/***********************************************************************
+ * @Function: ns7520_mii_get_clock_divisor
+ * @Return: the clock divisor that should be used in NS7520_ETH_MCFG_CLKS
+ * @Descr: if no clock divisor can be calculated for the
+ * current SYSCLK and the maximum MDIO Clock, a warning is printed
+ * and the greatest divisor is taken
+ ***********************************************************************/
+
+static unsigned int ns7520_mii_get_clock_divisor(unsigned int unMaxMDIOClk)
+{
+ struct {
+ unsigned int unSysClkDivisor;
+ unsigned int unClks; /* field for NS7520_ETH_MCFG_CLKS */
+ } PHYClockDivisors[] = {
+ {
+ 4, NS7520_ETH_MCFG_CLKS_4}, {
+ 6, NS7520_ETH_MCFG_CLKS_6}, {
+ 8, NS7520_ETH_MCFG_CLKS_8}, {
+ 10, NS7520_ETH_MCFG_CLKS_10}, {
+ 14, NS7520_ETH_MCFG_CLKS_14}, {
+ 20, NS7520_ETH_MCFG_CLKS_20}, {
+ 28, NS7520_ETH_MCFG_CLKS_28}
+ };
+
+ int nIndexSysClkDiv;
+ int nArraySize =
+ sizeof(PHYClockDivisors) / sizeof(PHYClockDivisors[0]);
+ unsigned int unClks = NS7520_ETH_MCFG_CLKS_28; /* defaults to
+ greatest div */
+
+ DEBUG_FN(DEBUG_INIT);
+
+ for (nIndexSysClkDiv = 0; nIndexSysClkDiv < nArraySize;
+ nIndexSysClkDiv++) {
+ /* find first sysclock divisor that isn't higher than 2.5 MHz
+ clock */
+ if (NETARM_XTAL_FREQ /
+ PHYClockDivisors[nIndexSysClkDiv].unSysClkDivisor <=
+ unMaxMDIOClk) {
+ unClks = PHYClockDivisors[nIndexSysClkDiv].unClks;
+ break;
+ }
+ }
+
+ DEBUG_ARGS2(DEBUG_INIT,
+ "Taking MDIO Clock bit mask 0x%0x for max clock %i\n",
+ unClks, unMaxMDIOClk);
+
+ /* return greatest divisor */
+ return unClks;
+}
+
+/***********************************************************************
+ * @Function: ns7520_mii_poll_busy
+ * @Return: 0 if timed out otherwise the remaing timeout
+ * @Descr: waits until the MII has completed a command or it times out
+ * code may be interrupted by hard interrupts.
+ * It is not checked what happens on multiple actions when
+ * the first is still being busy and we timeout.
+ ***********************************************************************/
+
+static unsigned int ns7520_mii_poll_busy(void)
+{
+ unsigned int unTimeout = 1000;
+
+ DEBUG_FN(DEBUG_MII_LOW);
+
+ while (((*get_eth_reg_addr(NS7520_ETH_MIND) & NS7520_ETH_MIND_BUSY)
+ == NS7520_ETH_MIND_BUSY) && unTimeout)
+ unTimeout--;
+
+ return unTimeout;
+}
+
+/* ----------------------------------------------------------------------------
+ * Net+ARM ethernet MII functionality.
+ */
+#if defined(CONFIG_MII)
+
+/**
+ * Maximum MII address we support
+ */
+#define MII_ADDRESS_MAX (31)
+
+/**
+ * Maximum MII register address we support
+ */
+#define MII_REGISTER_MAX (31)
+
+/**
+ * Ethernet MII interface return values for public functions.
+ */
+enum mii_status {
+ MII_STATUS_SUCCESS = 0,
+ MII_STATUS_FAILURE = 1,
+};
+
+/**
+ * Read a 16-bit value from an MII register.
+ */
+extern int ns7520_miiphy_read(char *devname, unsigned char const addr,
+ unsigned char const reg, unsigned short *const value)
+{
+ int ret = MII_STATUS_FAILURE;
+
+ /* Parameter checks */
+ if (addr > MII_ADDRESS_MAX) {
+ ERROR(("invalid addr, 0x%02X", addr));
+ goto miiphy_read_failed_0;
+ }
+
+ if (reg > MII_REGISTER_MAX) {
+ ERROR(("invalid reg, 0x%02X", reg));
+ goto miiphy_read_failed_0;
+ }
+
+ if (value == NULL) {
+ ERROR(("NULL value"));
+ goto miiphy_read_failed_0;
+ }
+
+ DEBUG_FN(DEBUG_MII_LOW);
+
+ /* write MII register to be read */
+ *get_eth_reg_addr(NS7520_ETH_MADR) = (addr << 8) | reg;
+
+ *get_eth_reg_addr(NS7520_ETH_MCMD) = NS7520_ETH_MCMD_READ;
+
+ if (!ns7520_mii_poll_busy())
+ printk(KERN_WARNING NS7520_DRIVER_NAME
+ ": MII still busy in read\n");
+ /* continue to read */
+
+ *get_eth_reg_addr(NS7520_ETH_MCMD) = 0;
+
+ *value = (*get_eth_reg_addr(NS7520_ETH_MRDD));
+ ret = MII_STATUS_SUCCESS;
+ /* Fall through */
+
+ miiphy_read_failed_0:
+ return (ret);
+}
+
+/**
+ * Write a 16-bit value to an MII register.
+ */
+extern int ns7520_miiphy_write(char *devname, unsigned char const addr,
+ unsigned char const reg, unsigned short const value)
+{
+ int ret = MII_STATUS_FAILURE;
+
+ /* Parameter checks */
+ if (addr > MII_ADDRESS_MAX) {
+ ERROR(("invalid addr, 0x%02X", addr));
+ goto miiphy_write_failed_0;
+ }
+
+ if (reg > MII_REGISTER_MAX) {
+ ERROR(("invalid reg, 0x%02X", reg));
+ goto miiphy_write_failed_0;
+ }
+
+ /* write MII register to be written */
+ *get_eth_reg_addr(NS7520_ETH_MADR) = (addr << 8) | reg;
+
+ *get_eth_reg_addr(NS7520_ETH_MWTD) = value;
+
+ if (!ns7520_mii_poll_busy()) {
+ printf(KERN_WARNING NS7520_DRIVER_NAME
+ ": MII still busy in write\n");
+ }
+
+ ret = MII_STATUS_SUCCESS;
+ /* Fall through */
+
+ miiphy_write_failed_0:
+ return (ret);
+}
+#endif /* defined(CONFIG_MII) */
+#endif /* CONFIG_DRIVER_NS7520_ETHERNET */
+
+int ns7520_miiphy_initialize(bd_t *bis)
+{
+#if defined(CONFIG_DRIVER_NS7520_ETHERNET)
+#if defined(CONFIG_MII)
+ miiphy_register("ns7520phy", ns7520_miiphy_read, ns7520_miiphy_write);
+#endif
+#endif
+ return 0;
+}
diff --git a/drivers/net/ns8382x.c b/drivers/net/ns8382x.c
new file mode 100644
index 0000000..f8b143a
--- /dev/null
+++ b/drivers/net/ns8382x.c
@@ -0,0 +1,863 @@
+/*
+ ns8382x.c: A U-Boot driver for the NatSemi DP8382[01].
+ ported by: Mark A. Rakes (mark_rakes@vivato.net)
+
+ Adapted from:
+ 1. an Etherboot driver for DP8381[56] written by:
+ Copyright (C) 2001 Entity Cyber, Inc.
+
+ This development of this Etherboot driver was funded by
+ Sicom Systems: http://www.sicompos.com/
+
+ Author: Marty Connor (mdc@thinguin.org)
+ Adapted from a Linux driver which was written by Donald Becker
+
+ This software may be used and distributed according to the terms
+ of the GNU Public License (GPL), incorporated herein by reference.
+
+ 2. A Linux driver by Donald Becker, ns820.c:
+ Written/copyright 1999-2002 by Donald Becker.
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice. This file is not
+ a complete program and may only be used when the entire operating
+ system is licensed under the GPL. License for under other terms may be
+ available. Contact the original author for details.
+
+ The original author may be reached as becker@scyld.com, or at
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ Support information and updates available at
+ http://www.scyld.com/network/netsemi.html
+
+ Datasheets available from:
+ http://www.national.com/pf/DP/DP83820.html
+ http://www.national.com/pf/DP/DP83821.html
+*/
+
+/* Revision History
+ * October 2002 mar 1.0
+ * Initial U-Boot Release.
+ * Tested with Netgear GA622T (83820)
+ * and SMC9452TX (83821)
+ * NOTE: custom boards with these chips may (likely) require
+ * a programmed EEPROM device (if present) in order to work
+ * correctly.
+*/
+
+/* Includes */
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#if defined(CONFIG_CMD_NET) \
+ && defined(CONFIG_NET_MULTI) && defined(CONFIG_NS8382X)
+
+/* defines */
+#define DSIZE 0x00000FFF
+#define ETH_ALEN 6
+#define CRC_SIZE 4
+#define TOUT_LOOP 500000
+#define TX_BUF_SIZE 1536
+#define RX_BUF_SIZE 1536
+#define NUM_RX_DESC 4 /* Number of Rx descriptor registers. */
+
+enum register_offsets {
+ ChipCmd = 0x00,
+ ChipConfig = 0x04,
+ EECtrl = 0x08,
+ IntrMask = 0x14,
+ IntrEnable = 0x18,
+ TxRingPtr = 0x20,
+ TxRingPtrHi = 0x24,
+ TxConfig = 0x28,
+ RxRingPtr = 0x30,
+ RxRingPtrHi = 0x34,
+ RxConfig = 0x38,
+ PriQueue = 0x3C,
+ RxFilterAddr = 0x48,
+ RxFilterData = 0x4C,
+ ClkRun = 0xCC,
+ PCIPM = 0x44,
+};
+
+enum ChipCmdBits {
+ ChipReset = 0x100,
+ RxReset = 0x20,
+ TxReset = 0x10,
+ RxOff = 0x08,
+ RxOn = 0x04,
+ TxOff = 0x02,
+ TxOn = 0x01
+};
+
+enum ChipConfigBits {
+ LinkSts = 0x80000000,
+ GigSpeed = 0x40000000,
+ HundSpeed = 0x20000000,
+ FullDuplex = 0x10000000,
+ TBIEn = 0x01000000,
+ Mode1000 = 0x00400000,
+ T64En = 0x00004000,
+ D64En = 0x00001000,
+ M64En = 0x00000800,
+ PhyRst = 0x00000400,
+ PhyDis = 0x00000200,
+ ExtStEn = 0x00000100,
+ BEMode = 0x00000001,
+};
+#define SpeedStatus_Polarity ( GigSpeed | HundSpeed | FullDuplex)
+
+enum TxConfig_bits {
+ TxDrthMask = 0x000000ff,
+ TxFlthMask = 0x0000ff00,
+ TxMxdmaMask = 0x00700000,
+ TxMxdma_8 = 0x00100000,
+ TxMxdma_16 = 0x00200000,
+ TxMxdma_32 = 0x00300000,
+ TxMxdma_64 = 0x00400000,
+ TxMxdma_128 = 0x00500000,
+ TxMxdma_256 = 0x00600000,
+ TxMxdma_512 = 0x00700000,
+ TxMxdma_1024 = 0x00000000,
+ TxCollRetry = 0x00800000,
+ TxAutoPad = 0x10000000,
+ TxMacLoop = 0x20000000,
+ TxHeartIgn = 0x40000000,
+ TxCarrierIgn = 0x80000000
+};
+
+enum RxConfig_bits {
+ RxDrthMask = 0x0000003e,
+ RxMxdmaMask = 0x00700000,
+ RxMxdma_8 = 0x00100000,
+ RxMxdma_16 = 0x00200000,
+ RxMxdma_32 = 0x00300000,
+ RxMxdma_64 = 0x00400000,
+ RxMxdma_128 = 0x00500000,
+ RxMxdma_256 = 0x00600000,
+ RxMxdma_512 = 0x00700000,
+ RxMxdma_1024 = 0x00000000,
+ RxAcceptLenErr = 0x04000000,
+ RxAcceptLong = 0x08000000,
+ RxAcceptTx = 0x10000000,
+ RxStripCRC = 0x20000000,
+ RxAcceptRunt = 0x40000000,
+ RxAcceptErr = 0x80000000,
+};
+
+/* Bits in the RxMode register. */
+enum rx_mode_bits {
+ RxFilterEnable = 0x80000000,
+ AcceptAllBroadcast = 0x40000000,
+ AcceptAllMulticast = 0x20000000,
+ AcceptAllUnicast = 0x10000000,
+ AcceptPerfectMatch = 0x08000000,
+};
+
+typedef struct _BufferDesc {
+ u32 link;
+ u32 bufptr;
+ vu_long cmdsts;
+ u32 extsts; /*not used here */
+} BufferDesc;
+
+/* Bits in network_desc.status */
+enum desc_status_bits {
+ DescOwn = 0x80000000, DescMore = 0x40000000, DescIntr = 0x20000000,
+ DescNoCRC = 0x10000000, DescPktOK = 0x08000000,
+ DescSizeMask = 0xfff,
+
+ DescTxAbort = 0x04000000, DescTxFIFO = 0x02000000,
+ DescTxCarrier = 0x01000000, DescTxDefer = 0x00800000,
+ DescTxExcDefer = 0x00400000, DescTxOOWCol = 0x00200000,
+ DescTxExcColl = 0x00100000, DescTxCollCount = 0x000f0000,
+
+ DescRxAbort = 0x04000000, DescRxOver = 0x02000000,
+ DescRxDest = 0x01800000, DescRxLong = 0x00400000,
+ DescRxRunt = 0x00200000, DescRxInvalid = 0x00100000,
+ DescRxCRC = 0x00080000, DescRxAlign = 0x00040000,
+ DescRxLoop = 0x00020000, DesRxColl = 0x00010000,
+};
+
+/* Bits in MEAR */
+enum mii_reg_bits {
+ MDIO_ShiftClk = 0x0040,
+ MDIO_EnbOutput = 0x0020,
+ MDIO_Data = 0x0010,
+};
+
+/* PHY Register offsets. */
+enum phy_reg_offsets {
+ BMCR = 0x00,
+ BMSR = 0x01,
+ PHYIDR1 = 0x02,
+ PHYIDR2 = 0x03,
+ ANAR = 0x04,
+ KTCR = 0x09,
+};
+
+/* basic mode control register bits */
+enum bmcr_bits {
+ Bmcr_Reset = 0x8000,
+ Bmcr_Loop = 0x4000,
+ Bmcr_Speed0 = 0x2000,
+ Bmcr_AutoNegEn = 0x1000, /*if set ignores Duplex, Speed[01] */
+ Bmcr_RstAutoNeg = 0x0200,
+ Bmcr_Duplex = 0x0100,
+ Bmcr_Speed1 = 0x0040,
+ Bmcr_Force10H = 0x0000,
+ Bmcr_Force10F = 0x0100,
+ Bmcr_Force100H = 0x2000,
+ Bmcr_Force100F = 0x2100,
+ Bmcr_Force1000H = 0x0040,
+ Bmcr_Force1000F = 0x0140,
+};
+
+/* auto negotiation advertisement register */
+enum anar_bits {
+ anar_adv_100F = 0x0100,
+ anar_adv_100H = 0x0080,
+ anar_adv_10F = 0x0040,
+ anar_adv_10H = 0x0020,
+ anar_ieee_8023 = 0x0001,
+};
+
+/* 1K-base T control register */
+enum ktcr_bits {
+ ktcr_adv_1000H = 0x0100,
+ ktcr_adv_1000F = 0x0200,
+};
+
+/* Globals */
+static u32 SavedClkRun;
+static unsigned int cur_rx;
+static unsigned int rx_config;
+static unsigned int tx_config;
+
+/* Note: transmit and receive buffers and descriptors must be
+ long long word aligned */
+static BufferDesc txd __attribute__ ((aligned(8)));
+static BufferDesc rxd[NUM_RX_DESC] __attribute__ ((aligned(8)));
+static unsigned char txb[TX_BUF_SIZE] __attribute__ ((aligned(8)));
+static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE]
+ __attribute__ ((aligned(8)));
+
+/* Function Prototypes */
+static int mdio_read(struct eth_device *dev, int phy_id, int addr);
+static void mdio_write(struct eth_device *dev, int phy_id, int addr, int value);
+static void mdio_sync(struct eth_device *dev, u32 offset);
+static int ns8382x_init(struct eth_device *dev, bd_t * bis);
+static void ns8382x_reset(struct eth_device *dev);
+static void ns8382x_init_rxfilter(struct eth_device *dev);
+static void ns8382x_init_txd(struct eth_device *dev);
+static void ns8382x_init_rxd(struct eth_device *dev);
+static void ns8382x_set_rx_mode(struct eth_device *dev);
+static void ns8382x_check_duplex(struct eth_device *dev);
+static int ns8382x_send(struct eth_device *dev, volatile void *packet,
+ int length);
+static int ns8382x_poll(struct eth_device *dev);
+static void ns8382x_disable(struct eth_device *dev);
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83820},
+ {}
+};
+
+#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
+#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+
+static inline int
+INW(struct eth_device *dev, u_long addr)
+{
+ return le16_to_cpu(*(vu_short *) (addr + dev->iobase));
+}
+
+static int
+INL(struct eth_device *dev, u_long addr)
+{
+ return le32_to_cpu(*(vu_long *) (addr + dev->iobase));
+}
+
+static inline void
+OUTW(struct eth_device *dev, int command, u_long addr)
+{
+ *(vu_short *) ((addr + dev->iobase)) = cpu_to_le16(command);
+}
+
+static inline void
+OUTL(struct eth_device *dev, int command, u_long addr)
+{
+ *(vu_long *) ((addr + dev->iobase)) = cpu_to_le32(command);
+}
+
+/* Function: ns8382x_initialize
+ * Description: Retrieves the MAC address of the card, and sets up some
+ * globals required by other routines, and initializes the NIC, making it
+ * ready to send and receive packets.
+ * Side effects: initializes ns8382xs, ready to recieve packets.
+ * Returns: int: number of cards found
+ */
+
+int
+ns8382x_initialize(bd_t * bis)
+{
+ pci_dev_t devno;
+ int card_number = 0;
+ struct eth_device *dev;
+ u32 iobase, status;
+ int i, idx = 0;
+ u32 phyAddress;
+ u32 tmp;
+ u32 chip_config;
+
+ while (1) { /* Find PCI device(s) */
+ if ((devno = pci_find_devices(supported, idx++)) < 0)
+ break;
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+ iobase &= ~0x3; /* 1: unused and 0:I/O Space Indicator */
+
+#ifdef NS8382X_DEBUG
+ printf("ns8382x: NatSemi dp8382x @ 0x%x\n", iobase);
+#endif
+
+ pci_write_config_dword(devno, PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+ /* Check if I/O accesses and Bus Mastering are enabled. */
+ pci_read_config_dword(devno, PCI_COMMAND, &status);
+ if (!(status & PCI_COMMAND_MEMORY)) {
+ printf("Error: Can not enable MEM access.\n");
+ continue;
+ } else if (!(status & PCI_COMMAND_MASTER)) {
+ printf("Error: Can not enable Bus Mastering.\n");
+ continue;
+ }
+
+ dev = (struct eth_device *) malloc(sizeof *dev);
+
+ sprintf(dev->name, "dp8382x#%d", card_number);
+ dev->iobase = bus_to_phys(iobase);
+ dev->priv = (void *) devno;
+ dev->init = ns8382x_init;
+ dev->halt = ns8382x_disable;
+ dev->send = ns8382x_send;
+ dev->recv = ns8382x_poll;
+
+ /* ns8382x has a non-standard PM control register
+ * in PCI config space. Some boards apparently need
+ * to be brought to D0 in this manner. */
+ pci_read_config_dword(devno, PCIPM, &tmp);
+ if (tmp & (0x03 | 0x100)) { /* D0 state, disable PME assertion */
+ u32 newtmp = tmp & ~(0x03 | 0x100);
+ pci_write_config_dword(devno, PCIPM, newtmp);
+ }
+
+ /* get MAC address */
+ for (i = 0; i < 3; i++) {
+ u32 data;
+ char *mac = (char *)&dev->enetaddr[i * 2];
+
+ OUTL(dev, i * 2, RxFilterAddr);
+ data = INL(dev, RxFilterData);
+ *mac++ = data;
+ *mac++ = data >> 8;
+ }
+ /* get PHY address, can't be zero */
+ for (phyAddress = 1; phyAddress < 32; phyAddress++) {
+ u32 rev, phy1;
+
+ phy1 = mdio_read(dev, phyAddress, PHYIDR1);
+ if (phy1 == 0x2000) { /*check for 83861/91 */
+ rev = mdio_read(dev, phyAddress, PHYIDR2);
+ if ((rev & ~(0x000f)) == 0x00005c50 ||
+ (rev & ~(0x000f)) == 0x00005c60) {
+#ifdef NS8382X_DEBUG
+ printf("phy rev is %x\n", rev);
+ printf("phy address is %x\n",
+ phyAddress);
+#endif
+ break;
+ }
+ }
+ }
+
+ /* set phy to autonegotiate && advertise everything */
+ mdio_write(dev, phyAddress, KTCR,
+ (ktcr_adv_1000H | ktcr_adv_1000F));
+ mdio_write(dev, phyAddress, ANAR,
+ (anar_adv_100F | anar_adv_100H | anar_adv_10H |
+ anar_adv_10F | anar_ieee_8023));
+ mdio_write(dev, phyAddress, BMCR, 0x0); /*restore */
+ mdio_write(dev, phyAddress, BMCR,
+ (Bmcr_AutoNegEn | Bmcr_RstAutoNeg));
+ /* Reset the chip to erase any previous misconfiguration. */
+ OUTL(dev, (ChipReset), ChipCmd);
+
+ chip_config = INL(dev, ChipConfig);
+ /* reset the phy */
+ OUTL(dev, (chip_config | PhyRst), ChipConfig);
+ /* power up and initialize transceiver */
+ OUTL(dev, (chip_config & ~(PhyDis)), ChipConfig);
+
+ mdio_sync(dev, EECtrl);
+#ifdef NS8382X_DEBUG
+ {
+ u32 chpcfg =
+ INL(dev, ChipConfig) ^ SpeedStatus_Polarity;
+
+ printf("%s: Transceiver 10%s %s duplex.\n", dev->name,
+ (chpcfg & GigSpeed) ? "00" : (chpcfg & HundSpeed)
+ ? "0" : "",
+ chpcfg & FullDuplex ? "full" : "half");
+ printf("%s: %02x:%02x:%02x:%02x:%02x:%02x\n", dev->name,
+ dev->enetaddr[0], dev->enetaddr[1],
+ dev->enetaddr[2], dev->enetaddr[3],
+ dev->enetaddr[4], dev->enetaddr[5]);
+ }
+#endif
+ /* Disable PME:
+ * The PME bit is initialized from the EEPROM contents.
+ * PCI cards probably have PME disabled, but motherboard
+ * implementations may have PME set to enable WakeOnLan.
+ * With PME set the chip will scan incoming packets but
+ * nothing will be written to memory. */
+ SavedClkRun = INL(dev, ClkRun);
+ OUTL(dev, SavedClkRun & ~0x100, ClkRun);
+
+ eth_register(dev);
+
+ card_number++;
+
+ pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x60);
+
+ udelay(10 * 1000);
+ }
+ return card_number;
+}
+
+/* MII transceiver control section.
+ Read and write MII registers using software-generated serial MDIO
+ protocol. See the MII specifications or DP83840A data sheet for details.
+
+ The maximum data clock rate is 2.5 Mhz. To meet minimum timing we
+ must flush writes to the PCI bus with a PCI read. */
+#define mdio_delay(mdio_addr) INL(dev, mdio_addr)
+
+#define MDIO_EnbIn (0)
+#define MDIO_WRITE0 (MDIO_EnbOutput)
+#define MDIO_WRITE1 (MDIO_Data | MDIO_EnbOutput)
+
+/* Generate the preamble required for initial synchronization and
+ a few older transceivers. */
+static void
+mdio_sync(struct eth_device *dev, u32 offset)
+{
+ int bits = 32;
+
+ /* Establish sync by sending at least 32 logic ones. */
+ while (--bits >= 0) {
+ OUTL(dev, MDIO_WRITE1, offset);
+ mdio_delay(offset);
+ OUTL(dev, MDIO_WRITE1 | MDIO_ShiftClk, offset);
+ mdio_delay(offset);
+ }
+}
+
+static int
+mdio_read(struct eth_device *dev, int phy_id, int addr)
+{
+ int mii_cmd = (0xf6 << 10) | (phy_id << 5) | addr;
+ int i, retval = 0;
+
+ /* Shift the read command bits out. */
+ for (i = 15; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+
+ OUTL(dev, dataval, EECtrl);
+ mdio_delay(EECtrl);
+ OUTL(dev, dataval | MDIO_ShiftClk, EECtrl);
+ mdio_delay(EECtrl);
+ }
+ /* Read the two transition, 16 data, and wire-idle bits. */
+ for (i = 19; i > 0; i--) {
+ OUTL(dev, MDIO_EnbIn, EECtrl);
+ mdio_delay(EECtrl);
+ retval =
+ (retval << 1) | ((INL(dev, EECtrl) & MDIO_Data) ? 1 : 0);
+ OUTL(dev, MDIO_EnbIn | MDIO_ShiftClk, EECtrl);
+ mdio_delay(EECtrl);
+ }
+ return (retval >> 1) & 0xffff;
+}
+
+static void
+mdio_write(struct eth_device *dev, int phy_id, int addr, int value)
+{
+ int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (addr << 18) | value;
+ int i;
+
+ /* Shift the command bits out. */
+ for (i = 31; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+
+ OUTL(dev, dataval, EECtrl);
+ mdio_delay(EECtrl);
+ OUTL(dev, dataval | MDIO_ShiftClk, EECtrl);
+ mdio_delay(EECtrl);
+ }
+ /* Clear out extra bits. */
+ for (i = 2; i > 0; i--) {
+ OUTL(dev, MDIO_EnbIn, EECtrl);
+ mdio_delay(EECtrl);
+ OUTL(dev, MDIO_EnbIn | MDIO_ShiftClk, EECtrl);
+ mdio_delay(EECtrl);
+ }
+ return;
+}
+
+/* Function: ns8382x_init
+ * Description: resets the ethernet controller chip and configures
+ * registers and data structures required for sending and receiving packets.
+ * Arguments: struct eth_device *dev: NIC data structure
+ * returns: int.
+ */
+
+static int
+ns8382x_init(struct eth_device *dev, bd_t * bis)
+{
+ u32 config;
+
+ ns8382x_reset(dev);
+
+ /* Disable PME:
+ * The PME bit is initialized from the EEPROM contents.
+ * PCI cards probably have PME disabled, but motherboard
+ * implementations may have PME set to enable WakeOnLan.
+ * With PME set the chip will scan incoming packets but
+ * nothing will be written to memory. */
+ OUTL(dev, SavedClkRun & ~0x100, ClkRun);
+
+ ns8382x_init_rxfilter(dev);
+ ns8382x_init_txd(dev);
+ ns8382x_init_rxd(dev);
+
+ /*set up ChipConfig */
+ config = INL(dev, ChipConfig);
+ /*turn off 64 bit ops && Ten-bit interface
+ * && big-endian mode && extended status */
+ config &= ~(TBIEn | Mode1000 | T64En | D64En | M64En | BEMode | PhyDis | ExtStEn);
+ OUTL(dev, config, ChipConfig);
+
+ /* Configure the PCI bus bursts and FIFO thresholds. */
+ tx_config = TxCarrierIgn | TxHeartIgn | TxAutoPad
+ | TxCollRetry | TxMxdma_1024 | (0x1002);
+ rx_config = RxMxdma_1024 | 0x20;
+#ifdef NS8382X_DEBUG
+ printf("%s: Setting TxConfig Register %#08X\n", dev->name, tx_config);
+ printf("%s: Setting RxConfig Register %#08X\n", dev->name, rx_config);
+#endif
+ OUTL(dev, tx_config, TxConfig);
+ OUTL(dev, rx_config, RxConfig);
+
+ /*turn off priority queueing */
+ OUTL(dev, 0x0, PriQueue);
+
+ ns8382x_check_duplex(dev);
+ ns8382x_set_rx_mode(dev);
+
+ OUTL(dev, (RxOn | TxOn), ChipCmd);
+ return 1;
+}
+
+/* Function: ns8382x_reset
+ * Description: soft resets the controller chip
+ * Arguments: struct eth_device *dev: NIC data structure
+ * Returns: void.
+ */
+static void
+ns8382x_reset(struct eth_device *dev)
+{
+ OUTL(dev, ChipReset, ChipCmd);
+ while (INL(dev, ChipCmd))
+ /*wait until done */ ;
+ OUTL(dev, 0, IntrMask);
+ OUTL(dev, 0, IntrEnable);
+}
+
+/* Function: ns8382x_init_rxfilter
+ * Description: sets receive filter address to our MAC address
+ * Arguments: struct eth_device *dev: NIC data structure
+ * returns: void.
+ */
+
+static void
+ns8382x_init_rxfilter(struct eth_device *dev)
+{
+ int i;
+
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ OUTL(dev, i, RxFilterAddr);
+ OUTW(dev, dev->enetaddr[i] + (dev->enetaddr[i + 1] << 8),
+ RxFilterData);
+ }
+}
+
+/* Function: ns8382x_init_txd
+ * Description: initializes the Tx descriptor
+ * Arguments: struct eth_device *dev: NIC data structure
+ * returns: void.
+ */
+
+static void
+ns8382x_init_txd(struct eth_device *dev)
+{
+ txd.link = (u32) 0;
+ txd.bufptr = cpu_to_le32((u32) & txb[0]);
+ txd.cmdsts = (u32) 0;
+ txd.extsts = (u32) 0;
+
+ OUTL(dev, 0x0, TxRingPtrHi);
+ OUTL(dev, phys_to_bus((u32)&txd), TxRingPtr);
+#ifdef NS8382X_DEBUG
+ printf("ns8382x_init_txd: TX descriptor register loaded with: %#08X (&txd: %p)\n",
+ INL(dev, TxRingPtr), &txd);
+#endif
+}
+
+/* Function: ns8382x_init_rxd
+ * Description: initializes the Rx descriptor ring
+ * Arguments: struct eth_device *dev: NIC data structure
+ * Returns: void.
+ */
+
+static void
+ns8382x_init_rxd(struct eth_device *dev)
+{
+ int i;
+
+ OUTL(dev, 0x0, RxRingPtrHi);
+
+ cur_rx = 0;
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ rxd[i].link =
+ cpu_to_le32((i + 1 <
+ NUM_RX_DESC) ? (u32) & rxd[i +
+ 1] : (u32) &
+ rxd[0]);
+ rxd[i].extsts = cpu_to_le32((u32) 0x0);
+ rxd[i].cmdsts = cpu_to_le32((u32) RX_BUF_SIZE);
+ rxd[i].bufptr = cpu_to_le32((u32) & rxb[i * RX_BUF_SIZE]);
+#ifdef NS8382X_DEBUG
+ printf
+ ("ns8382x_init_rxd: rxd[%d]=%p link=%X cmdsts=%X bufptr=%X\n",
+ i, &rxd[i], le32_to_cpu(rxd[i].link),
+ le32_to_cpu(rxd[i].cmdsts), le32_to_cpu(rxd[i].bufptr));
+#endif
+ }
+ OUTL(dev, phys_to_bus((u32) & rxd), RxRingPtr);
+
+#ifdef NS8382X_DEBUG
+ printf("ns8382x_init_rxd: RX descriptor register loaded with: %X\n",
+ INL(dev, RxRingPtr));
+#endif
+}
+
+/* Function: ns8382x_set_rx_mode
+ * Description:
+ * sets the receive mode to accept all broadcast packets and packets
+ * with our MAC address, and reject all multicast packets.
+ * Arguments: struct eth_device *dev: NIC data structure
+ * Returns: void.
+ */
+
+static void
+ns8382x_set_rx_mode(struct eth_device *dev)
+{
+ u32 rx_mode = 0x0;
+ /*spec says RxFilterEnable has to be 0 for rest of
+ * this stuff to be properly configured. Linux driver
+ * seems to support this*/
+/* OUTL(dev, rx_mode, RxFilterAddr);*/
+ rx_mode = (RxFilterEnable | AcceptAllBroadcast | AcceptPerfectMatch);
+ OUTL(dev, rx_mode, RxFilterAddr);
+ printf("ns8382x_set_rx_mode: set to %X\n", rx_mode);
+ /*now we turn RxFilterEnable back on */
+ /*rx_mode |= RxFilterEnable;
+ OUTL(dev, rx_mode, RxFilterAddr);*/
+}
+
+static void
+ns8382x_check_duplex(struct eth_device *dev)
+{
+ int gig = 0;
+ int hun = 0;
+ int duplex = 0;
+ int config = (INL(dev, ChipConfig) ^ SpeedStatus_Polarity);
+
+ duplex = (config & FullDuplex) ? 1 : 0;
+ gig = (config & GigSpeed) ? 1 : 0;
+ hun = (config & HundSpeed) ? 1 : 0;
+#ifdef NS8382X_DEBUG
+ printf("%s: Setting 10%s %s-duplex based on negotiated link"
+ " capability.\n", dev->name, (gig) ? "00" : (hun) ? "0" : "",
+ duplex ? "full" : "half");
+#endif
+ if (duplex) {
+ rx_config |= RxAcceptTx;
+ tx_config |= (TxCarrierIgn | TxHeartIgn);
+ } else {
+ rx_config &= ~RxAcceptTx;
+ tx_config &= ~(TxCarrierIgn | TxHeartIgn);
+ }
+#ifdef NS8382X_DEBUG
+ printf("%s: Resetting TxConfig Register %#08X\n", dev->name, tx_config);
+ printf("%s: Resetting RxConfig Register %#08X\n", dev->name, rx_config);
+#endif
+ OUTL(dev, tx_config, TxConfig);
+ OUTL(dev, rx_config, RxConfig);
+
+ /*if speed is 10 or 100, remove MODE1000,
+ * if it's 1000, then set it */
+ config = INL(dev, ChipConfig);
+ if (gig)
+ config |= Mode1000;
+ else
+ config &= ~Mode1000;
+
+#ifdef NS8382X_DEBUG
+ printf("%s: %setting Mode1000\n", dev->name, (gig) ? "S" : "Uns");
+#endif
+ OUTL(dev, config, ChipConfig);
+}
+
+/* Function: ns8382x_send
+ * Description: transmits a packet and waits for completion or timeout.
+ * Returns: void. */
+static int
+ns8382x_send(struct eth_device *dev, volatile void *packet, int length)
+{
+ u32 i, status = 0;
+ vu_long tx_stat = 0;
+
+ /* Stop the transmitter */
+ OUTL(dev, TxOff, ChipCmd);
+#ifdef NS8382X_DEBUG
+ printf("ns8382x_send: sending %d bytes\n", (int)length);
+#endif
+
+ /* set the transmit buffer descriptor and enable Transmit State Machine */
+ txd.link = cpu_to_le32(0x0);
+ txd.bufptr = cpu_to_le32(phys_to_bus((u32)packet));
+ txd.extsts = cpu_to_le32(0x0);
+ txd.cmdsts = cpu_to_le32(DescOwn | length);
+
+ /* load Transmit Descriptor Register */
+ OUTL(dev, phys_to_bus((u32) & txd), TxRingPtr);
+#ifdef NS8382X_DEBUG
+ printf("ns8382x_send: TX descriptor register loaded with: %#08X\n",
+ INL(dev, TxRingPtr));
+ printf("\ttxd.link:%X\tbufp:%X\texsts:%X\tcmdsts:%X\n",
+ le32_to_cpu(txd.link), le32_to_cpu(txd.bufptr),
+ le32_to_cpu(txd.extsts), le32_to_cpu(txd.cmdsts));
+#endif
+ /* restart the transmitter */
+ OUTL(dev, TxOn, ChipCmd);
+
+ for (i = 0; (tx_stat = le32_to_cpu(txd.cmdsts)) & DescOwn; i++) {
+ if (i >= TOUT_LOOP) {
+ printf ("%s: tx error buffer not ready: txd.cmdsts %#X\n",
+ dev->name, tx_stat);
+ goto Done;
+ }
+ }
+
+ if (!(tx_stat & DescPktOK)) {
+ printf("ns8382x_send: Transmit error, Tx status %X.\n", tx_stat);
+ goto Done;
+ }
+#ifdef NS8382X_DEBUG
+ printf("ns8382x_send: tx_stat: %#08X\n", tx_stat);
+#endif
+
+ status = 1;
+ Done:
+ return status;
+}
+
+/* Function: ns8382x_poll
+ * Description: checks for a received packet and returns it if found.
+ * Arguments: struct eth_device *dev: NIC data structure
+ * Returns: 1 if packet was received.
+ * 0 if no packet was received.
+ * Side effects:
+ * Returns (copies) the packet to the array dev->packet.
+ * Returns the length of the packet.
+ */
+
+static int
+ns8382x_poll(struct eth_device *dev)
+{
+ int retstat = 0;
+ int length = 0;
+ vu_long rx_status = le32_to_cpu(rxd[cur_rx].cmdsts);
+
+ if (!(rx_status & (u32) DescOwn))
+ return retstat;
+#ifdef NS8382X_DEBUG
+ printf("ns8382x_poll: got a packet: cur_rx:%u, status:%lx\n",
+ cur_rx, rx_status);
+#endif
+ length = (rx_status & DSIZE) - CRC_SIZE;
+
+ if ((rx_status & (DescMore | DescPktOK | DescRxLong)) != DescPktOK) {
+ /* corrupted packet received */
+ printf("ns8382x_poll: Corrupted packet, status:%lx\n", rx_status);
+ retstat = 0;
+ } else {
+ /* give packet to higher level routine */
+ NetReceive((rxb + cur_rx * RX_BUF_SIZE), length);
+ retstat = 1;
+ }
+
+ /* return the descriptor and buffer to receive ring */
+ rxd[cur_rx].cmdsts = cpu_to_le32(RX_BUF_SIZE);
+ rxd[cur_rx].bufptr = cpu_to_le32((u32) & rxb[cur_rx * RX_BUF_SIZE]);
+
+ if (++cur_rx == NUM_RX_DESC)
+ cur_rx = 0;
+
+ /* re-enable the potentially idle receive state machine */
+ OUTL(dev, RxOn, ChipCmd);
+
+ return retstat;
+}
+
+/* Function: ns8382x_disable
+ * Description: Turns off interrupts and stops Tx and Rx engines
+ * Arguments: struct eth_device *dev: NIC data structure
+ * Returns: void.
+ */
+
+static void
+ns8382x_disable(struct eth_device *dev)
+{
+ /* Disable interrupts using the mask. */
+ OUTL(dev, 0, IntrMask);
+ OUTL(dev, 0, IntrEnable);
+
+ /* Stop the chip's Tx and Rx processes. */
+ OUTL(dev, (RxOff | TxOff), ChipCmd);
+
+ /* Restore PME enable bit */
+ OUTL(dev, SavedClkRun, ClkRun);
+}
+
+#endif
diff --git a/drivers/net/ns9750_eth.c b/drivers/net/ns9750_eth.c
new file mode 100644
index 0000000..067ff8e
--- /dev/null
+++ b/drivers/net/ns9750_eth.c
@@ -0,0 +1,797 @@
+/***********************************************************************
+ *
+ * Copyright (C) 2004 by FS Forth-Systeme GmbH.
+ * All rights reserved.
+ *
+ * $Id: ns9750_eth.c,v 1.2 2004/02/24 14:09:39 mpietrek Exp $
+ * @Author: Markus Pietrek
+ * @Descr: Ethernet driver for the NS9750. Uses DMA Engine with polling
+ * interrupt status. But interrupts are not enabled.
+ * Only one tx buffer descriptor and the RXA buffer descriptor are used
+ * Currently no transmit lockup handling is included. eth_send has a 5s
+ * timeout for sending frames. No retransmits are performed when an
+ * error occurs.
+ * @References: [1] NS9750 Hardware Reference, December 2003
+ * [2] Intel LXT971 Datasheet #249414 Rev. 02
+ * [3] NS7520 Linux Ethernet Driver
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ***********************************************************************/
+
+#include <common.h>
+#include <net.h> /* NetSendPacket */
+
+#include "ns9750_eth.h" /* for Ethernet and PHY */
+
+#ifdef CONFIG_DRIVER_NS9750_ETHERNET
+
+/* some definition to make transistion to linux easier */
+
+#define NS9750_DRIVER_NAME "eth"
+#define KERN_WARNING "Warning:"
+#define KERN_ERR "Error:"
+#define KERN_INFO "Info:"
+
+#if 0
+# define DEBUG
+#endif
+
+#ifdef DEBUG
+# define printk printf
+
+# define DEBUG_INIT 0x0001
+# define DEBUG_MINOR 0x0002
+# define DEBUG_RX 0x0004
+# define DEBUG_TX 0x0008
+# define DEBUG_INT 0x0010
+# define DEBUG_POLL 0x0020
+# define DEBUG_LINK 0x0040
+# define DEBUG_MII 0x0100
+# define DEBUG_MII_LOW 0x0200
+# define DEBUG_MEM 0x0400
+# define DEBUG_ERROR 0x4000
+# define DEBUG_ERROR_CRIT 0x8000
+
+static int nDebugLvl = DEBUG_ERROR_CRIT;
+
+# define DEBUG_ARGS0( FLG, a0 ) if( ( nDebugLvl & (FLG) ) == (FLG) ) \
+ printf("%s: " a0, __FUNCTION__, 0, 0, 0, 0, 0, 0 )
+# define DEBUG_ARGS1( FLG, a0, a1 ) if( ( nDebugLvl & (FLG) ) == (FLG)) \
+ printf("%s: " a0, __FUNCTION__, (int)(a1), 0, 0, 0, 0, 0 )
+# define DEBUG_ARGS2( FLG, a0, a1, a2 ) if( (nDebugLvl & (FLG)) ==(FLG))\
+ printf("%s: " a0, __FUNCTION__, (int)(a1), (int)(a2), 0, 0,0,0 )
+# define DEBUG_ARGS3( FLG, a0, a1, a2, a3 ) if((nDebugLvl &(FLG))==(FLG))\
+ printf("%s: "a0,__FUNCTION__,(int)(a1),(int)(a2),(int)(a3),0,0,0)
+# define DEBUG_FN( FLG ) if( (nDebugLvl & (FLG)) == (FLG) ) \
+ printf("\r%s:line %d\n", (int)__FUNCTION__, __LINE__, 0,0,0,0);
+# define ASSERT( expr, func ) if( !( expr ) ) { \
+ printf( "Assertion failed! %s:line %d %s\n", \
+ (int)__FUNCTION__,__LINE__,(int)(#expr),0,0,0); \
+ func }
+#else /* DEBUG */
+# define printk(...)
+# define DEBUG_ARGS0( FLG, a0 )
+# define DEBUG_ARGS1( FLG, a0, a1 )
+# define DEBUG_ARGS2( FLG, a0, a1, a2 )
+# define DEBUG_ARGS3( FLG, a0, a1, a2, a3 )
+# define DEBUG_FN( n )
+# define ASSERT(expr, func)
+#endif /* DEBUG */
+
+#define NS9750_MII_NEG_DELAY (5*CFG_HZ) /* in s */
+#define TX_TIMEOUT (5*CFG_HZ) /* in s */
+
+/* @TODO move it to eeprom.h */
+#define FS_EEPROM_AUTONEG_MASK 0x7
+#define FS_EEPROM_AUTONEG_SPEED_MASK 0x1
+#define FS_EEPROM_AUTONEG_SPEED_10 0x0
+#define FS_EEPROM_AUTONEG_SPEED_100 0x1
+#define FS_EEPROM_AUTONEG_DUPLEX_MASK 0x2
+#define FS_EEPROM_AUTONEG_DUPLEX_HALF 0x0
+#define FS_EEPROM_AUTONEG_DUPLEX_FULL 0x2
+#define FS_EEPROM_AUTONEG_ENABLE_MASK 0x4
+#define FS_EEPROM_AUTONEG_DISABLE 0x0
+#define FS_EEPROM_AUTONEG_ENABLE 0x4
+
+/* buffer descriptors taken from [1] p.306 */
+typedef struct
+{
+ unsigned int* punSrc;
+ unsigned int unLen; /* 11 bits */
+ unsigned int* punDest; /* unused */
+ union {
+ unsigned int unReg;
+ struct {
+ unsigned uStatus : 16;
+ unsigned uRes : 12;
+ unsigned uFull : 1;
+ unsigned uEnable : 1;
+ unsigned uInt : 1;
+ unsigned uWrap : 1;
+ } bits;
+ } s;
+} rx_buffer_desc_t;
+
+typedef struct
+{
+ unsigned int* punSrc;
+ unsigned int unLen; /* 10 bits */
+ unsigned int* punDest; /* unused */
+ union {
+ unsigned int unReg; /* only 32bit accesses may done to NS9750
+ * eth engine */
+ struct {
+ unsigned uStatus : 16;
+ unsigned uRes : 12;
+ unsigned uFull : 1;
+ unsigned uLast : 1;
+ unsigned uInt : 1;
+ unsigned uWrap : 1;
+ } bits;
+ } s;
+} tx_buffer_desc_t;
+
+static int ns9750_eth_reset( void );
+
+static void ns9750_link_force( void );
+static void ns9750_link_auto_negotiate( void );
+static void ns9750_link_update_egcr( void );
+static void ns9750_link_print_changed( void );
+
+/* the PHY stuff */
+
+static char ns9750_mii_identify_phy( void );
+static unsigned short ns9750_mii_read( unsigned short uiRegister );
+static void ns9750_mii_write( unsigned short uiRegister, unsigned short uiData );
+static unsigned int ns9750_mii_get_clock_divisor( unsigned int unMaxMDIOClk );
+static unsigned int ns9750_mii_poll_busy( void );
+
+static unsigned int nPhyMaxMdioClock = PHY_MDIO_MAX_CLK;
+static unsigned char ucLinkMode = FS_EEPROM_AUTONEG_ENABLE;
+static unsigned int uiLastLinkStatus;
+static PhyType phyDetected = PHY_NONE;
+
+/* we use only one tx buffer descriptor */
+static tx_buffer_desc_t* pTxBufferDesc =
+ (tx_buffer_desc_t*) get_eth_reg_addr( NS9750_ETH_TXBD );
+
+/* we use only one rx buffer descriptor of the 4 */
+static rx_buffer_desc_t aRxBufferDesc[ 4 ];
+
+/***********************************************************************
+ * @Function: eth_init
+ * @Return: -1 on failure otherwise 0
+ * @Descr: Initializes the ethernet engine and uses either FS Forth's default
+ * MAC addr or the one in environment
+ ***********************************************************************/
+
+int eth_init (bd_t * pbis)
+{
+ /* This default MAC Addr is reserved by FS Forth-Systeme for the case of
+ EEPROM failures */
+ unsigned char aucMACAddr[6] = { 0x00, 0x04, 0xf3, 0x00, 0x06, 0x35 };
+ char *pcTmp = getenv ("ethaddr");
+ char *pcEnd;
+ int i;
+
+ DEBUG_FN (DEBUG_INIT);
+
+ /* no need to check for hardware */
+
+ if (!ns9750_eth_reset ())
+ return -1;
+
+ if (pcTmp != NULL)
+ for (i = 0; i < 6; i++) {
+ aucMACAddr[i] =
+ pcTmp ? simple_strtoul (pcTmp, &pcEnd,
+ 16) : 0;
+ pcTmp = (*pcTmp) ? pcEnd + 1 : pcEnd;
+ }
+
+ /* configure ethernet address */
+
+ *get_eth_reg_addr (NS9750_ETH_SA1) =
+ aucMACAddr[5] << 8 | aucMACAddr[4];
+ *get_eth_reg_addr (NS9750_ETH_SA2) =
+ aucMACAddr[3] << 8 | aucMACAddr[2];
+ *get_eth_reg_addr (NS9750_ETH_SA3) =
+ aucMACAddr[1] << 8 | aucMACAddr[0];
+
+ /* enable hardware */
+
+ *get_eth_reg_addr (NS9750_ETH_MAC1) = NS9750_ETH_MAC1_RXEN;
+
+ /* the linux kernel may give packets < 60 bytes, for example arp */
+ *get_eth_reg_addr (NS9750_ETH_MAC2) = NS9750_ETH_MAC2_CRCEN |
+ NS9750_ETH_MAC2_PADEN | NS9750_ETH_MAC2_HUGE;
+
+ /* enable receive and transmit FIFO, use 10/100 Mbps MII */
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) =
+ NS9750_ETH_EGCR1_ETXWM |
+ NS9750_ETH_EGCR1_ERX |
+ NS9750_ETH_EGCR1_ERXDMA |
+ NS9750_ETH_EGCR1_ETX |
+ NS9750_ETH_EGCR1_ETXDMA | NS9750_ETH_EGCR1_ITXA;
+
+ /* prepare DMA descriptors */
+ for (i = 0; i < 4; i++) {
+ aRxBufferDesc[i].punSrc = 0;
+ aRxBufferDesc[i].unLen = 0;
+ aRxBufferDesc[i].s.bits.uWrap = 1;
+ aRxBufferDesc[i].s.bits.uInt = 1;
+ aRxBufferDesc[i].s.bits.uEnable = 0;
+ aRxBufferDesc[i].s.bits.uFull = 0;
+ }
+
+ /* NetRxPackets[ 0 ] is initialized before eth_init is called and never
+ changes. NetRxPackets is 32bit aligned */
+ aRxBufferDesc[0].punSrc = (unsigned int *) NetRxPackets[0];
+ aRxBufferDesc[0].s.bits.uEnable = 1;
+ aRxBufferDesc[0].unLen = 1522; /* as stated in [1] p.307 */
+
+ *get_eth_reg_addr (NS9750_ETH_RXAPTR) =
+ (unsigned int) &aRxBufferDesc[0];
+
+ /* [1] Tab. 221 states less than 5us */
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) |= NS9750_ETH_EGCR1_ERXINIT;
+ while (!
+ (*get_eth_reg_addr (NS9750_ETH_EGSR) & NS9750_ETH_EGSR_RXINIT))
+ /* wait for finish */
+ udelay (1);
+
+ /* @TODO do we need to clear RXINIT? */
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) &= ~NS9750_ETH_EGCR1_ERXINIT;
+
+ *get_eth_reg_addr (NS9750_ETH_RXFREE) = 0x1;
+
+ return 0;
+}
+
+/***********************************************************************
+ * @Function: eth_send
+ * @Return: -1 on timeout otherwise 1
+ * @Descr: sends one frame by DMA
+ ***********************************************************************/
+
+int eth_send (volatile void *pPacket, int nLen)
+{
+ ulong ulTimeout;
+
+ DEBUG_FN (DEBUG_TX);
+
+ /* clear old status values */
+ *get_eth_reg_addr (NS9750_ETH_EINTR) &=
+ *get_eth_reg_addr (NS9750_ETH_EINTR) & NS9750_ETH_EINTR_TX_MA;
+
+ /* prepare Tx Descriptors */
+
+ pTxBufferDesc->punSrc = (unsigned int *) pPacket; /* pPacket is 32bit
+ * aligned */
+ pTxBufferDesc->unLen = nLen;
+ /* only 32bit accesses allowed. wrap, full, interrupt and enabled to 1 */
+ pTxBufferDesc->s.unReg = 0xf0000000;
+ /* pTxBufferDesc is the first possible buffer descriptor */
+ *get_eth_reg_addr (NS9750_ETH_TXPTR) = 0x0;
+
+ /* enable processor for next frame */
+
+ *get_eth_reg_addr (NS9750_ETH_EGCR2) &= ~NS9750_ETH_EGCR2_TCLER;
+ *get_eth_reg_addr (NS9750_ETH_EGCR2) |= NS9750_ETH_EGCR2_TCLER;
+
+ ulTimeout = get_timer (0);
+
+ DEBUG_ARGS0 (DEBUG_TX | DEBUG_MINOR,
+ "Waiting for transmission to finish\n");
+ while (!
+ (*get_eth_reg_addr (NS9750_ETH_EINTR) &
+ (NS9750_ETH_EINTR_TXDONE | NS9750_ETH_EINTR_TXERR))) {
+ /* do nothing, wait for completion */
+ if (get_timer (0) - ulTimeout > TX_TIMEOUT) {
+ DEBUG_ARGS0 (DEBUG_TX, "Transmit Timed out\n");
+ return -1;
+ }
+ }
+ DEBUG_ARGS0 (DEBUG_TX | DEBUG_MINOR, "transmitted...\n");
+
+ return 0;
+}
+
+/***********************************************************************
+ * @Function: eth_rx
+ * @Return: size of last frame in bytes or 0 if no frame available
+ * @Descr: gives one frame to U-Boot which has been copied by DMA engine already
+ * to NetRxPackets[ 0 ].
+ ***********************************************************************/
+
+int eth_rx (void)
+{
+ int nLen = 0;
+ unsigned int unStatus;
+
+ unStatus =
+ *get_eth_reg_addr (NS9750_ETH_EINTR) & NS9750_ETH_EINTR_RX_MA;
+
+ if (!unStatus)
+ /* no packet available, return immediately */
+ return 0;
+
+ DEBUG_FN (DEBUG_RX);
+
+ /* unLen always < max(nLen) and discard checksum */
+ nLen = (int) aRxBufferDesc[0].unLen - 4;
+
+ /* acknowledge status register */
+ *get_eth_reg_addr (NS9750_ETH_EINTR) = unStatus;
+
+ aRxBufferDesc[0].unLen = 1522;
+ aRxBufferDesc[0].s.bits.uFull = 0;
+
+ /* Buffer A descriptor available again */
+ *get_eth_reg_addr (NS9750_ETH_RXFREE) |= 0x1;
+
+ /* NetReceive may call eth_send. Due to a possible bug of the NS9750 we
+ * have to acknowledge the received frame before sending a new one */
+ if (unStatus & NS9750_ETH_EINTR_RXDONEA)
+ NetReceive (NetRxPackets[0], nLen);
+
+ return nLen;
+}
+
+/***********************************************************************
+ * @Function: eth_halt
+ * @Return: n/a
+ * @Descr: stops the ethernet engine
+ ***********************************************************************/
+
+void eth_halt (void)
+{
+ DEBUG_FN (DEBUG_INIT);
+
+ *get_eth_reg_addr (NS9750_ETH_MAC1) &= ~NS9750_ETH_MAC1_RXEN;
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) &= ~(NS9750_ETH_EGCR1_ERX |
+ NS9750_ETH_EGCR1_ERXDMA |
+ NS9750_ETH_EGCR1_ETX |
+ NS9750_ETH_EGCR1_ETXDMA);
+}
+
+/***********************************************************************
+ * @Function: ns9750_eth_reset
+ * @Return: 0 on failure otherwise 1
+ * @Descr: resets the ethernet interface and the PHY,
+ * performs auto negotiation or fixed modes
+ ***********************************************************************/
+
+static int ns9750_eth_reset (void)
+{
+ DEBUG_FN (DEBUG_MINOR);
+
+ /* Reset MAC */
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) |= NS9750_ETH_EGCR1_MAC_HRST;
+ udelay (5); /* according to [1], p.322 */
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) &= ~NS9750_ETH_EGCR1_MAC_HRST;
+
+ /* reset and initialize PHY */
+
+ *get_eth_reg_addr (NS9750_ETH_MAC1) &= ~NS9750_ETH_MAC1_SRST;
+
+ /* we don't support hot plugging of PHY, therefore we don't reset
+ phyDetected and nPhyMaxMdioClock here. The risk is if the setting is
+ incorrect the first open
+ may detect the PHY correctly but succeding will fail
+ For reseting the PHY and identifying we have to use the standard
+ MDIO CLOCK value 2.5 MHz only after hardware reset
+ After having identified the PHY we will do faster */
+
+ *get_eth_reg_addr (NS9750_ETH_MCFG) =
+ ns9750_mii_get_clock_divisor (nPhyMaxMdioClock);
+
+ /* reset PHY */
+ ns9750_mii_write (PHY_COMMON_CTRL, PHY_COMMON_CTRL_RESET);
+ ns9750_mii_write (PHY_COMMON_CTRL, 0);
+
+ /* @TODO check time */
+ udelay (3000); /* [2] p.70 says at least 300us reset recovery time. But
+ go sure, it didn't worked stable at higher timer
+ frequencies under LxNETES-2.x */
+
+ /* MII clock has been setup to default, ns9750_mii_identify_phy should
+ work for all */
+
+ if (!ns9750_mii_identify_phy ()) {
+ printk (KERN_ERR NS9750_DRIVER_NAME
+ ": Unsupported PHY, aborting\n");
+ return 0;
+ }
+
+ /* now take the highest MDIO clock possible after detection */
+ *get_eth_reg_addr (NS9750_ETH_MCFG) =
+ ns9750_mii_get_clock_divisor (nPhyMaxMdioClock);
+
+
+ /* PHY has been detected, so there can be no abort reason and we can
+ finish initializing ethernet */
+
+ uiLastLinkStatus = 0xff; /* undefined */
+
+ if ((ucLinkMode & FS_EEPROM_AUTONEG_ENABLE_MASK) ==
+ FS_EEPROM_AUTONEG_DISABLE)
+ /* use parameters defined */
+ ns9750_link_force ();
+ else
+ ns9750_link_auto_negotiate ();
+
+ if (phyDetected == PHY_LXT971A)
+ /* set LED2 to link mode */
+ ns9750_mii_write (PHY_LXT971_LED_CFG,
+ PHY_LXT971_LED_CFG_LINK_ACT <<
+ PHY_LXT971_LED_CFG_SHIFT_LED2);
+
+ return 1;
+}
+
+/***********************************************************************
+ * @Function: ns9750_link_force
+ * @Return: void
+ * @Descr: configures eth and MII to use the link mode defined in
+ * ucLinkMode
+ ***********************************************************************/
+
+static void ns9750_link_force (void)
+{
+ unsigned short uiControl;
+
+ DEBUG_FN (DEBUG_LINK);
+
+ uiControl = ns9750_mii_read (PHY_COMMON_CTRL);
+ uiControl &= ~(PHY_COMMON_CTRL_SPD_MA |
+ PHY_COMMON_CTRL_AUTO_NEG | PHY_COMMON_CTRL_DUPLEX);
+
+ uiLastLinkStatus = 0;
+
+ if ((ucLinkMode & FS_EEPROM_AUTONEG_SPEED_MASK) ==
+ FS_EEPROM_AUTONEG_SPEED_100) {
+ uiControl |= PHY_COMMON_CTRL_SPD_100;
+ uiLastLinkStatus |= PHY_LXT971_STAT2_100BTX;
+ } else
+ uiControl |= PHY_COMMON_CTRL_SPD_10;
+
+ if ((ucLinkMode & FS_EEPROM_AUTONEG_DUPLEX_MASK) ==
+ FS_EEPROM_AUTONEG_DUPLEX_FULL) {
+ uiControl |= PHY_COMMON_CTRL_DUPLEX;
+ uiLastLinkStatus |= PHY_LXT971_STAT2_DUPLEX_MODE;
+ }
+
+ ns9750_mii_write (PHY_COMMON_CTRL, uiControl);
+
+ ns9750_link_print_changed ();
+ ns9750_link_update_egcr ();
+}
+
+/***********************************************************************
+ * @Function: ns9750_link_auto_negotiate
+ * @Return: void
+ * @Descr: performs auto-negotation of link.
+ ***********************************************************************/
+
+static void ns9750_link_auto_negotiate (void)
+{
+ unsigned long ulStartJiffies;
+ unsigned short uiStatus;
+
+ DEBUG_FN (DEBUG_LINK);
+
+ /* run auto-negotation */
+ /* define what we are capable of */
+ ns9750_mii_write (PHY_COMMON_AUTO_ADV,
+ PHY_COMMON_AUTO_ADV_100BTXFD |
+ PHY_COMMON_AUTO_ADV_100BTX |
+ PHY_COMMON_AUTO_ADV_10BTFD |
+ PHY_COMMON_AUTO_ADV_10BT |
+ PHY_COMMON_AUTO_ADV_802_3);
+ /* start auto-negotiation */
+ ns9750_mii_write (PHY_COMMON_CTRL,
+ PHY_COMMON_CTRL_AUTO_NEG |
+ PHY_COMMON_CTRL_RES_AUTO);
+
+ /* wait for completion */
+
+ ulStartJiffies = get_ticks ();
+ while (get_ticks () < ulStartJiffies + NS9750_MII_NEG_DELAY) {
+ uiStatus = ns9750_mii_read (PHY_COMMON_STAT);
+ if ((uiStatus &
+ (PHY_COMMON_STAT_AN_COMP | PHY_COMMON_STAT_LNK_STAT)) ==
+ (PHY_COMMON_STAT_AN_COMP | PHY_COMMON_STAT_LNK_STAT)) {
+ /* lucky we are, auto-negotiation succeeded */
+ ns9750_link_print_changed ();
+ ns9750_link_update_egcr ();
+ return;
+ }
+ }
+
+ DEBUG_ARGS0 (DEBUG_LINK, "auto-negotiation timed out\n");
+ /* ignore invalid link settings */
+}
+
+/***********************************************************************
+ * @Function: ns9750_link_update_egcr
+ * @Return: void
+ * @Descr: updates the EGCR and MAC2 link status after mode change or
+ * auto-negotation
+ ***********************************************************************/
+
+static void ns9750_link_update_egcr (void)
+{
+ unsigned int unEGCR;
+ unsigned int unMAC2;
+ unsigned int unIPGT;
+
+ DEBUG_FN (DEBUG_LINK);
+
+ unEGCR = *get_eth_reg_addr (NS9750_ETH_EGCR1);
+ unMAC2 = *get_eth_reg_addr (NS9750_ETH_MAC2);
+ unIPGT = *get_eth_reg_addr (NS9750_ETH_IPGT) & ~NS9750_ETH_IPGT_MA;
+
+ unMAC2 &= ~NS9750_ETH_MAC2_FULLD;
+ if ((uiLastLinkStatus & PHY_LXT971_STAT2_DUPLEX_MODE)
+ == PHY_LXT971_STAT2_DUPLEX_MODE) {
+ unMAC2 |= NS9750_ETH_MAC2_FULLD;
+ unIPGT |= 0x15; /* see [1] p. 339 */
+ } else
+ unIPGT |= 0x12; /* see [1] p. 339 */
+
+ *get_eth_reg_addr (NS9750_ETH_MAC2) = unMAC2;
+ *get_eth_reg_addr (NS9750_ETH_EGCR1) = unEGCR;
+ *get_eth_reg_addr (NS9750_ETH_IPGT) = unIPGT;
+}
+
+/***********************************************************************
+ * @Function: ns9750_link_print_changed
+ * @Return: void
+ * @Descr: checks whether the link status has changed and if so prints
+ * the new mode
+ ***********************************************************************/
+
+static void ns9750_link_print_changed (void)
+{
+ unsigned short uiStatus;
+ unsigned short uiControl;
+
+ DEBUG_FN (DEBUG_LINK);
+
+ uiControl = ns9750_mii_read (PHY_COMMON_CTRL);
+
+ if ((uiControl & PHY_COMMON_CTRL_AUTO_NEG) ==
+ PHY_COMMON_CTRL_AUTO_NEG) {
+ /* PHY_COMMON_STAT_LNK_STAT is only set on autonegotiation */
+ uiStatus = ns9750_mii_read (PHY_COMMON_STAT);
+
+ if (!(uiStatus & PHY_COMMON_STAT_LNK_STAT)) {
+ printk (KERN_WARNING NS9750_DRIVER_NAME
+ ": link down\n");
+ /* @TODO Linux: carrier_off */
+ } else {
+ /* @TODO Linux: carrier_on */
+ if (phyDetected == PHY_LXT971A) {
+ uiStatus = ns9750_mii_read (PHY_LXT971_STAT2);
+ uiStatus &= (PHY_LXT971_STAT2_100BTX |
+ PHY_LXT971_STAT2_DUPLEX_MODE |
+ PHY_LXT971_STAT2_AUTO_NEG);
+
+ /* mask out all uninteresting parts */
+ }
+ /* other PHYs must store there link information in
+ uiStatus as PHY_LXT971 */
+ }
+ } else {
+ /* mode has been forced, so uiStatus should be the same as the
+ last link status, enforce printing */
+ uiStatus = uiLastLinkStatus;
+ uiLastLinkStatus = 0xff;
+ }
+
+ if (uiStatus != uiLastLinkStatus) {
+ /* save current link status */
+ uiLastLinkStatus = uiStatus;
+
+ /* print new link status */
+
+ printk (KERN_INFO NS9750_DRIVER_NAME
+ ": link mode %i Mbps %s duplex %s\n",
+ (uiStatus & PHY_LXT971_STAT2_100BTX) ? 100 : 10,
+ (uiStatus & PHY_LXT971_STAT2_DUPLEX_MODE) ? "full" :
+ "half",
+ (uiStatus & PHY_LXT971_STAT2_AUTO_NEG) ? "(auto)" :
+ "");
+ }
+}
+
+/***********************************************************************
+ * the MII low level stuff
+ ***********************************************************************/
+
+/***********************************************************************
+ * @Function: ns9750_mii_identify_phy
+ * @Return: 1 if supported PHY has been detected otherwise 0
+ * @Descr: checks for supported PHY and prints the IDs.
+ ***********************************************************************/
+
+static char ns9750_mii_identify_phy (void)
+{
+ unsigned short uiID1;
+ unsigned short uiID2;
+ unsigned char *szName;
+ char cRes = 0;
+
+ DEBUG_FN (DEBUG_MII);
+
+ phyDetected = (PhyType) uiID1 = ns9750_mii_read (PHY_COMMON_ID1);
+
+ switch (phyDetected) {
+ case PHY_LXT971A:
+ szName = "LXT971A";
+ uiID2 = ns9750_mii_read (PHY_COMMON_ID2);
+ nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK;
+ cRes = 1;
+ break;
+ case PHY_NONE:
+ default:
+ /* in case uiID1 == 0 && uiID2 == 0 we may have the wrong
+ address or reset sets the wrong NS9750_ETH_MCFG_CLKS */
+
+ uiID2 = 0;
+ szName = "unknown";
+ nPhyMaxMdioClock = PHY_MDIO_MAX_CLK;
+ phyDetected = PHY_NONE;
+ }
+
+ printk (KERN_INFO NS9750_DRIVER_NAME
+ ": PHY (0x%x, 0x%x) = %s detected\n", uiID1, uiID2, szName);
+
+ return cRes;
+}
+
+/***********************************************************************
+ * @Function: ns9750_mii_read
+ * @Return: the data read from PHY register uiRegister
+ * @Descr: the data read may be invalid if timed out. If so, a message
+ * is printed but the invalid data is returned.
+ * The fixed device address is being used.
+ ***********************************************************************/
+
+static unsigned short ns9750_mii_read (unsigned short uiRegister)
+{
+ DEBUG_FN (DEBUG_MII_LOW);
+
+ /* write MII register to be read */
+ *get_eth_reg_addr (NS9750_ETH_MADR) =
+ NS9750_ETH_PHY_ADDRESS << 8 | uiRegister;
+
+ *get_eth_reg_addr (NS9750_ETH_MCMD) = NS9750_ETH_MCMD_READ;
+
+ if (!ns9750_mii_poll_busy ())
+ printk (KERN_WARNING NS9750_DRIVER_NAME
+ ": MII still busy in read\n");
+ /* continue to read */
+
+ *get_eth_reg_addr (NS9750_ETH_MCMD) = 0;
+
+ return (unsigned short) (*get_eth_reg_addr (NS9750_ETH_MRDD));
+}
+
+
+/***********************************************************************
+ * @Function: ns9750_mii_write
+ * @Return: nothing
+ * @Descr: writes the data to the PHY register. In case of a timeout,
+ * no special handling is performed but a message printed
+ * The fixed device address is being used.
+ ***********************************************************************/
+
+static void ns9750_mii_write (unsigned short uiRegister,
+ unsigned short uiData)
+{
+ DEBUG_FN (DEBUG_MII_LOW);
+
+ /* write MII register to be written */
+ *get_eth_reg_addr (NS9750_ETH_MADR) =
+ NS9750_ETH_PHY_ADDRESS << 8 | uiRegister;
+
+ *get_eth_reg_addr (NS9750_ETH_MWTD) = uiData;
+
+ if (!ns9750_mii_poll_busy ()) {
+ printf (KERN_WARNING NS9750_DRIVER_NAME
+ ": MII still busy in write\n");
+ }
+}
+
+
+/***********************************************************************
+ * @Function: ns9750_mii_get_clock_divisor
+ * @Return: the clock divisor that should be used in NS9750_ETH_MCFG_CLKS
+ * @Descr: if no clock divisor can be calculated for the
+ * current SYSCLK and the maximum MDIO Clock, a warning is printed
+ * and the greatest divisor is taken
+ ***********************************************************************/
+
+static unsigned int ns9750_mii_get_clock_divisor (unsigned int unMaxMDIOClk)
+{
+ struct {
+ unsigned int unSysClkDivisor;
+ unsigned int unClks; /* field for NS9750_ETH_MCFG_CLKS */
+ } PHYClockDivisors[] = {
+ {
+ 4, NS9750_ETH_MCFG_CLKS_4}, {
+ 6, NS9750_ETH_MCFG_CLKS_6}, {
+ 8, NS9750_ETH_MCFG_CLKS_8}, {
+ 10, NS9750_ETH_MCFG_CLKS_10}, {
+ 20, NS9750_ETH_MCFG_CLKS_20}, {
+ 30, NS9750_ETH_MCFG_CLKS_30}, {
+ 40, NS9750_ETH_MCFG_CLKS_40}
+ };
+
+ int nIndexSysClkDiv;
+ int nArraySize =
+ sizeof (PHYClockDivisors) / sizeof (PHYClockDivisors[0]);
+ unsigned int unClks = NS9750_ETH_MCFG_CLKS_40; /* defaults to
+ greatest div */
+
+ DEBUG_FN (DEBUG_INIT);
+
+ for (nIndexSysClkDiv = 0; nIndexSysClkDiv < nArraySize;
+ nIndexSysClkDiv++) {
+ /* find first sysclock divisor that isn't higher than 2.5 MHz
+ clock */
+ if (AHB_CLK_FREQ /
+ PHYClockDivisors[nIndexSysClkDiv].unSysClkDivisor <=
+ unMaxMDIOClk) {
+ unClks = PHYClockDivisors[nIndexSysClkDiv].unClks;
+ break;
+ }
+ }
+
+ DEBUG_ARGS2 (DEBUG_INIT,
+ "Taking MDIO Clock bit mask 0x%0x for max clock %i\n",
+ unClks, unMaxMDIOClk);
+
+ /* return greatest divisor */
+ return unClks;
+}
+
+/***********************************************************************
+ * @Function: ns9750_mii_poll_busy
+ * @Return: 0 if timed out otherwise the remaing timeout
+ * @Descr: waits until the MII has completed a command or it times out
+ * code may be interrupted by hard interrupts.
+ * It is not checked what happens on multiple actions when
+ * the first is still being busy and we timeout.
+ ***********************************************************************/
+
+static unsigned int ns9750_mii_poll_busy (void)
+{
+ unsigned int unTimeout = 10000;
+
+ DEBUG_FN (DEBUG_MII_LOW);
+
+ while (((*get_eth_reg_addr (NS9750_ETH_MIND) & NS9750_ETH_MIND_BUSY)
+ == NS9750_ETH_MIND_BUSY) && unTimeout)
+ unTimeout--;
+
+ return unTimeout;
+}
+
+#endif /* CONFIG_DRIVER_NS9750_ETHERNET */
diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c
new file mode 100644
index 0000000..2af0e8f
--- /dev/null
+++ b/drivers/net/pcnet.c
@@ -0,0 +1,526 @@
+/*
+ * (C) Copyright 2002 Wolfgang Grandegger, wg@denx.de.
+ *
+ * This driver for AMD PCnet network controllers is derived from the
+ * Linux driver pcnet32.c written 1996-1999 by Thomas Bogendoerfer.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#if 0
+#define PCNET_DEBUG_LEVEL 0 /* 0=off, 1=init, 2=rx/tx */
+#endif
+
+#if PCNET_DEBUG_LEVEL > 0
+#define PCNET_DEBUG1(fmt,args...) printf (fmt ,##args)
+#if PCNET_DEBUG_LEVEL > 1
+#define PCNET_DEBUG2(fmt,args...) printf (fmt ,##args)
+#else
+#define PCNET_DEBUG2(fmt,args...)
+#endif
+#else
+#define PCNET_DEBUG1(fmt,args...)
+#define PCNET_DEBUG2(fmt,args...)
+#endif
+
+#if defined(CONFIG_CMD_NET) \
+ && defined(CONFIG_NET_MULTI) && defined(CONFIG_PCNET)
+
+#if !defined(CONF_PCNET_79C973) && defined(CONF_PCNET_79C975)
+#error "Macro for PCnet chip version is not defined!"
+#endif
+
+/*
+ * Set the number of Tx and Rx buffers, using Log_2(# buffers).
+ * Reasonable default values are 4 Tx buffers, and 16 Rx buffers.
+ * That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4).
+ */
+#define PCNET_LOG_TX_BUFFERS 0
+#define PCNET_LOG_RX_BUFFERS 2
+
+#define TX_RING_SIZE (1 << (PCNET_LOG_TX_BUFFERS))
+#define TX_RING_LEN_BITS ((PCNET_LOG_TX_BUFFERS) << 12)
+
+#define RX_RING_SIZE (1 << (PCNET_LOG_RX_BUFFERS))
+#define RX_RING_LEN_BITS ((PCNET_LOG_RX_BUFFERS) << 4)
+
+#define PKT_BUF_SZ 1544
+
+/* The PCNET Rx and Tx ring descriptors. */
+struct pcnet_rx_head {
+ u32 base;
+ s16 buf_length;
+ s16 status;
+ u32 msg_length;
+ u32 reserved;
+};
+
+struct pcnet_tx_head {
+ u32 base;
+ s16 length;
+ s16 status;
+ u32 misc;
+ u32 reserved;
+};
+
+/* The PCNET 32-Bit initialization block, described in databook. */
+struct pcnet_init_block {
+ u16 mode;
+ u16 tlen_rlen;
+ u8 phys_addr[6];
+ u16 reserved;
+ u32 filter[2];
+ /* Receive and transmit ring base, along with extra bits. */
+ u32 rx_ring;
+ u32 tx_ring;
+ u32 reserved2;
+};
+
+typedef struct pcnet_priv {
+ struct pcnet_rx_head rx_ring[RX_RING_SIZE];
+ struct pcnet_tx_head tx_ring[TX_RING_SIZE];
+ struct pcnet_init_block init_block;
+ /* Receive Buffer space */
+ unsigned char rx_buf[RX_RING_SIZE][PKT_BUF_SZ + 4];
+ int cur_rx;
+ int cur_tx;
+} pcnet_priv_t;
+
+static pcnet_priv_t *lp;
+
+/* Offsets from base I/O address for WIO mode */
+#define PCNET_RDP 0x10
+#define PCNET_RAP 0x12
+#define PCNET_RESET 0x14
+#define PCNET_BDP 0x16
+
+static u16 pcnet_read_csr (struct eth_device *dev, int index)
+{
+ outw (index, dev->iobase+PCNET_RAP);
+ return inw (dev->iobase+PCNET_RDP);
+}
+
+static void pcnet_write_csr (struct eth_device *dev, int index, u16 val)
+{
+ outw (index, dev->iobase+PCNET_RAP);
+ outw (val, dev->iobase+PCNET_RDP);
+}
+
+static u16 pcnet_read_bcr (struct eth_device *dev, int index)
+{
+ outw (index, dev->iobase+PCNET_RAP);
+ return inw (dev->iobase+PCNET_BDP);
+}
+
+static void pcnet_write_bcr (struct eth_device *dev, int index, u16 val)
+{
+ outw (index, dev->iobase+PCNET_RAP);
+ outw (val, dev->iobase+PCNET_BDP);
+}
+
+static void pcnet_reset (struct eth_device *dev)
+{
+ inw (dev->iobase+PCNET_RESET);
+}
+
+static int pcnet_check (struct eth_device *dev)
+{
+ outw (88, dev->iobase+PCNET_RAP);
+ return (inw (dev->iobase+PCNET_RAP) == 88);
+}
+
+static int pcnet_init( struct eth_device* dev, bd_t *bis);
+static int pcnet_send (struct eth_device* dev, volatile void *packet,
+ int length);
+static int pcnet_recv (struct eth_device* dev);
+static void pcnet_halt (struct eth_device* dev);
+static int pcnet_probe(struct eth_device* dev, bd_t *bis, int dev_num);
+
+#define PCI_TO_MEM(d,a) pci_phys_to_mem((pci_dev_t)d->priv, (u_long)(a))
+#define PCI_TO_MEM_LE(d,a) (u32)(cpu_to_le32(PCI_TO_MEM(d,a)))
+
+static struct pci_device_id supported[] = {
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE },
+ { }
+};
+
+
+int pcnet_initialize(bd_t *bis)
+{
+ pci_dev_t devbusfn;
+ struct eth_device* dev;
+ u16 command, status;
+ int dev_nr = 0;
+
+ PCNET_DEBUG1("\npcnet_initialize...\n");
+
+ for (dev_nr = 0; ; dev_nr++) {
+
+ /*
+ * Find the PCnet PCI device(s).
+ */
+ if ((devbusfn = pci_find_devices(supported, dev_nr)) < 0) {
+ break;
+ }
+
+ /*
+ * Allocate and pre-fill the device structure.
+ */
+ dev = (struct eth_device*) malloc(sizeof *dev);
+ dev->priv = (void *)devbusfn;
+ sprintf(dev->name, "pcnet#%d", dev_nr);
+
+ /*
+ * Setup the PCI device.
+ */
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, (unsigned int *)&dev->iobase);
+ dev->iobase &= ~0xf;
+
+ PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%x: ",
+ dev->name, devbusfn, dev->iobase);
+
+ command = PCI_COMMAND_IO | PCI_COMMAND_MASTER;
+ pci_write_config_word(devbusfn, PCI_COMMAND, command);
+ pci_read_config_word(devbusfn, PCI_COMMAND, &status);
+ if ((status & command) != command) {
+ printf("%s: Couldn't enable IO access or Bus Mastering\n",
+ dev->name);
+ free(dev);
+ continue;
+ }
+
+ pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40);
+
+ /*
+ * Probe the PCnet chip.
+ */
+ if (pcnet_probe(dev, bis, dev_nr) < 0) {
+ free(dev);
+ continue;
+ }
+
+ /*
+ * Setup device structure and register the driver.
+ */
+ dev->init = pcnet_init;
+ dev->halt = pcnet_halt;
+ dev->send = pcnet_send;
+ dev->recv = pcnet_recv;
+
+ eth_register(dev);
+ }
+
+ udelay(10 * 1000);
+
+ return dev_nr;
+}
+
+static int pcnet_probe(struct eth_device* dev, bd_t *bis, int dev_nr)
+{
+ int chip_version;
+ char *chipname;
+#ifdef PCNET_HAS_PROM
+ int i;
+#endif
+
+ /* Reset the PCnet controller */
+ pcnet_reset(dev);
+
+ /* Check if register access is working */
+ if (pcnet_read_csr(dev, 0) != 4 || !pcnet_check(dev)) {
+ printf("%s: CSR register access check failed\n", dev->name);
+ return -1;
+ }
+
+ /* Identify the chip */
+ chip_version = pcnet_read_csr(dev, 88) | (pcnet_read_csr(dev,89) << 16);
+ if ((chip_version & 0xfff) != 0x003)
+ return -1;
+ chip_version = (chip_version >> 12) & 0xffff;
+ switch (chip_version) {
+#ifdef CONFIG_PCNET_79C973
+ case 0x2625:
+ chipname = "PCnet/FAST III 79C973"; /* PCI */
+ break;
+#endif
+#ifdef CONFIG_PCNET_79C975
+ case 0x2627:
+ chipname = "PCnet/FAST III 79C975"; /* PCI */
+ break;
+#endif
+ default:
+ printf("%s: PCnet version %#x not supported\n",
+ dev->name, chip_version);
+ return -1;
+ }
+
+ PCNET_DEBUG1("AMD %s\n", chipname);
+
+#ifdef PCNET_HAS_PROM
+ /*
+ * In most chips, after a chip reset, the ethernet address is read from
+ * the station address PROM at the base address and programmed into the
+ * "Physical Address Registers" CSR12-14.
+ */
+ for (i = 0; i < 3; i++) {
+ unsigned int val;
+ val = pcnet_read_csr(dev, i+12) & 0x0ffff;
+ /* There may be endianness issues here. */
+ dev->enetaddr[2*i ] = val & 0x0ff;
+ dev->enetaddr[2*i+1] = (val >> 8) & 0x0ff;
+ }
+#endif /* PCNET_HAS_PROM */
+
+ return 0;
+}
+
+static int pcnet_init(struct eth_device* dev, bd_t *bis)
+{
+ int i, val;
+ u32 addr;
+
+ PCNET_DEBUG1("%s: pcnet_init...\n", dev->name);
+
+ /* Switch pcnet to 32bit mode */
+ pcnet_write_bcr (dev, 20, 2);
+
+#ifdef CONFIG_PN62
+ /* Setup LED registers */
+ val = pcnet_read_bcr (dev, 2) | 0x1000;
+ pcnet_write_bcr (dev, 2, val); /* enable LEDPE */
+ pcnet_write_bcr (dev, 4, 0x5080); /* 100MBit */
+ pcnet_write_bcr (dev, 5, 0x40c0); /* LNKSE */
+ pcnet_write_bcr (dev, 6, 0x4090); /* TX Activity */
+ pcnet_write_bcr (dev, 7, 0x4084); /* RX Activity */
+#endif
+
+ /* Set/reset autoselect bit */
+ val = pcnet_read_bcr (dev, 2) & ~2;
+ val |= 2;
+ pcnet_write_bcr (dev, 2, val);
+
+ /* Enable auto negotiate, setup, disable fd */
+ val = pcnet_read_bcr(dev, 32) & ~0x98;
+ val |= 0x20;
+ pcnet_write_bcr(dev, 32, val);
+
+ /*
+ * We only maintain one structure because the drivers will never
+ * be used concurrently. In 32bit mode the RX and TX ring entries
+ * must be aligned on 16-byte boundaries.
+ */
+ if (lp == NULL) {
+ addr = (u32)malloc(sizeof(pcnet_priv_t) + 0x10);
+ addr = (addr + 0xf) & ~0xf;
+ lp = (pcnet_priv_t *)addr;
+ }
+
+ lp->init_block.mode = cpu_to_le16(0x0000);
+ lp->init_block.filter[0] = 0x00000000;
+ lp->init_block.filter[1] = 0x00000000;
+
+ /*
+ * Initialize the Rx ring.
+ */
+ lp->cur_rx = 0;
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ lp->rx_ring[i].base = PCI_TO_MEM_LE(dev, lp->rx_buf[i]);
+ lp->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ);
+ lp->rx_ring[i].status = cpu_to_le16(0x8000);
+ PCNET_DEBUG1("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n",
+ i, lp->rx_ring[i].base, lp->rx_ring[i].buf_length,
+ lp->rx_ring[i].status);
+ }
+
+ /*
+ * Initialize the Tx ring. The Tx buffer address is filled in as
+ * needed, but we do need to clear the upper ownership bit.
+ */
+ lp->cur_tx = 0;
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ lp->tx_ring[i].base = 0;
+ lp->tx_ring[i].status = 0;
+ }
+
+ /*
+ * Setup Init Block.
+ */
+ PCNET_DEBUG1("Init block at 0x%p: MAC", &lp->init_block);
+
+ for (i = 0; i < 6; i++) {
+ lp->init_block.phys_addr[i] = dev->enetaddr[i];
+ PCNET_DEBUG1(" %02x", lp->init_block.phys_addr[i]);
+ }
+
+ lp->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS |
+ RX_RING_LEN_BITS);
+ lp->init_block.rx_ring = PCI_TO_MEM_LE(dev, lp->rx_ring);
+ lp->init_block.tx_ring = PCI_TO_MEM_LE(dev, lp->tx_ring);
+
+ PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
+ lp->init_block.tlen_rlen,
+ lp->init_block.rx_ring, lp->init_block.tx_ring);
+
+ /*
+ * Tell the controller where the Init Block is located.
+ */
+ addr = PCI_TO_MEM(dev, &lp->init_block);
+ pcnet_write_csr(dev, 1, addr & 0xffff);
+ pcnet_write_csr(dev, 2, (addr >> 16) & 0xffff);
+
+ pcnet_write_csr (dev, 4, 0x0915);
+ pcnet_write_csr (dev, 0, 0x0001); /* start */
+
+ /* Wait for Init Done bit */
+ for (i = 10000; i > 0; i--) {
+ if (pcnet_read_csr (dev, 0) & 0x0100)
+ break;
+ udelay(10);
+ }
+ if (i <= 0) {
+ printf("%s: TIMEOUT: controller init failed\n", dev->name);
+ pcnet_reset (dev);
+ return 0;
+ }
+
+ /*
+ * Finally start network controller operation.
+ */
+ pcnet_write_csr (dev, 0, 0x0002);
+
+ return 1;
+}
+
+static int pcnet_send(struct eth_device* dev, volatile void *packet, int pkt_len)
+{
+ int i, status;
+ struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx];
+
+ PCNET_DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, packet);
+
+ /* Wait for completion by testing the OWN bit */
+ for (i = 1000; i > 0; i--) {
+ status = le16_to_cpu(entry->status);
+ if ((status & 0x8000) == 0)
+ break;
+ udelay(100);
+ PCNET_DEBUG2(".");
+ }
+ if (i <= 0) {
+ printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
+ dev->name, lp->cur_tx, status);
+ pkt_len = 0;
+ goto failure;
+ }
+
+ /*
+ * Setup Tx ring. Caution: the write order is important here,
+ * set the status with the "ownership" bits last.
+ */
+ status = 0x8300;
+ entry->length = le16_to_cpu(-pkt_len);
+ entry->misc = 0x00000000;
+ entry->base = PCI_TO_MEM_LE(dev, packet);
+ entry->status = le16_to_cpu(status);
+
+ /* Trigger an immediate send poll. */
+ pcnet_write_csr (dev, 0, 0x0008);
+
+ failure:
+ if (++lp->cur_tx >= TX_RING_SIZE)
+ lp->cur_tx = 0;
+
+ PCNET_DEBUG2("done\n");
+ return pkt_len;
+}
+
+static int pcnet_recv(struct eth_device* dev)
+{
+ struct pcnet_rx_head *entry;
+ int pkt_len = 0;
+ u16 status;
+
+ while (1) {
+ entry = &lp->rx_ring[lp->cur_rx];
+ /*
+ * If we own the next entry, it's a new packet. Send it up.
+ */
+ if (((status = le16_to_cpu(entry->status)) & 0x8000) != 0) {
+ break;
+ }
+ status >>= 8;
+
+ if (status != 0x03) { /* There was an error. */
+
+ printf("%s: Rx%d", dev->name, lp->cur_rx);
+ PCNET_DEBUG1(" (status=0x%x)", status);
+ if (status & 0x20) printf(" Frame");
+ if (status & 0x10) printf(" Overflow");
+ if (status & 0x08) printf(" CRC");
+ if (status & 0x04) printf(" Fifo");
+ printf(" Error\n");
+ entry->status &= le16_to_cpu(0x03ff);
+
+ } else {
+
+ pkt_len = (le32_to_cpu(entry->msg_length) & 0xfff) - 4;
+ if (pkt_len < 60) {
+ printf("%s: Rx%d: invalid packet length %d\n",
+ dev->name, lp->cur_rx, pkt_len);
+ } else {
+ NetReceive(lp->rx_buf[lp->cur_rx], pkt_len);
+ PCNET_DEBUG2("Rx%d: %d bytes from 0x%p\n",
+ lp->cur_rx, pkt_len, lp->rx_buf[lp->cur_rx]);
+ }
+ }
+ entry->status |= cpu_to_le16(0x8000);
+
+ if (++lp->cur_rx >= RX_RING_SIZE)
+ lp->cur_rx = 0;
+ }
+ return pkt_len;
+}
+
+static void pcnet_halt(struct eth_device* dev)
+{
+ int i;
+
+ PCNET_DEBUG1("%s: pcnet_halt...\n", dev->name);
+
+ /* Reset the PCnet controller */
+ pcnet_reset (dev);
+
+ /* Wait for Stop bit */
+ for (i = 1000; i > 0; i--) {
+ if (pcnet_read_csr (dev, 0) & 0x4)
+ break;
+ udelay(10);
+ }
+ if (i <= 0) {
+ printf("%s: TIMEOUT: controller reset failed\n", dev->name);
+ }
+}
+
+#endif
diff --git a/drivers/net/plb2800_eth.c b/drivers/net/plb2800_eth.c
new file mode 100644
index 0000000..0ae5d80
--- /dev/null
+++ b/drivers/net/plb2800_eth.c
@@ -0,0 +1,396 @@
+/*
+ * PLB2800 internal switch ethernet driver.
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_CMD_NET) \
+ && defined(CONFIG_NET_MULTI) && defined(CONFIG_PLB2800_ETHER)
+
+#include <malloc.h>
+#include <net.h>
+#include <asm/addrspace.h>
+
+
+#define NUM_RX_DESC PKTBUFSRX
+#define TOUT_LOOP 1000000
+
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define CMAC_CRX_CTRL LONG_REF(0xb800c870)
+#define CMAC_CTX_CTRL LONG_REF(0xb800c874)
+#define SYS_MAC_ADDR_0 LONG_REF(0xb800c878)
+#define SYS_MAC_ADDR_1 LONG_REF(0xb800c87c)
+#define MIPS_H_MASK LONG_REF(0xB800C810)
+
+#define MA_LEARN LONG_REF(0xb8008004)
+#define DA_LOOKUP LONG_REF(0xb8008008)
+
+#define CMAC_CRX_CTRL_PD 0x00000001
+#define CMAC_CRX_CTRL_CG 0x00000002
+#define CMAC_CRX_CTRL_PL_SHIFT 2
+#define CMAC_CRIT 0x0
+#define CMAC_NON_CRIT 0x1
+#define MBOX_STAT_ID_SHF 28
+#define MBOX_STAT_CP 0x80000000
+#define MBOX_STAT_MB 0x00000001
+#define EN_MA_LEARN 0x02000000
+#define EN_DA_LKUP 0x01000000
+#define MA_DEST_SHF 11
+#define DA_DEST_SHF 11
+#define DA_STATE_SHF 19
+#define TSTAMP_MS 0x00000000
+#define SW_H_MBOX4_MASK 0x08000000
+#define SW_H_MBOX3_MASK 0x04000000
+#define SW_H_MBOX2_MASK 0x02000000
+#define SW_H_MBOX1_MASK 0x01000000
+
+typedef volatile struct {
+ unsigned int stat;
+ unsigned int cmd;
+ unsigned int cnt;
+ unsigned int adr;
+} mailbox_t;
+
+#define MBOX_REG(mb) ((mailbox_t*)(0xb800c830+(mb<<4)))
+
+typedef volatile struct {
+ unsigned int word0;
+ unsigned int word1;
+ unsigned int word2;
+} mbhdr_t;
+
+#define MBOX_MEM(mb) ((void*)(0xb800a000+((3-mb)<<11)))
+
+
+static int plb2800_eth_init(struct eth_device *dev, bd_t * bis);
+static int plb2800_eth_send(struct eth_device *dev, volatile void *packet,
+ int length);
+static int plb2800_eth_recv(struct eth_device *dev);
+static void plb2800_eth_halt(struct eth_device *dev);
+
+static void plb2800_set_mac_addr(struct eth_device *dev, unsigned char * addr);
+static unsigned char * plb2800_get_mac_addr(void);
+
+static int rx_new;
+static int mac_addr_set = 0;
+
+
+int plb2800_eth_initialize(bd_t * bis)
+{
+ struct eth_device *dev;
+ ulong temp;
+
+#ifdef DEBUG
+ printf("Entered plb2800_eth_initialize()\n");
+#endif
+
+ if (!(dev = (struct eth_device *) malloc (sizeof *dev)))
+ {
+ printf("Failed to allocate memory\n");
+ return 0;
+ }
+ memset(dev, 0, sizeof(*dev));
+
+ sprintf(dev->name, "PLB2800 Switch");
+ dev->init = plb2800_eth_init;
+ dev->halt = plb2800_eth_halt;
+ dev->send = plb2800_eth_send;
+ dev->recv = plb2800_eth_recv;
+
+ eth_register(dev);
+
+ /* bug fix */
+ *(ulong *)0xb800e800 = 0x838;
+
+ /* Set MBOX ownership */
+ temp = CMAC_CRIT << MBOX_STAT_ID_SHF;
+ MBOX_REG(0)->stat = temp;
+ MBOX_REG(1)->stat = temp;
+
+ temp = CMAC_NON_CRIT << MBOX_STAT_ID_SHF;
+ MBOX_REG(2)->stat = temp;
+ MBOX_REG(3)->stat = temp;
+
+ plb2800_set_mac_addr(dev, plb2800_get_mac_addr());
+
+ /* Disable all Mbox interrupt */
+ temp = MIPS_H_MASK;
+ temp &= ~ (SW_H_MBOX1_MASK | SW_H_MBOX2_MASK | SW_H_MBOX3_MASK | SW_H_MBOX4_MASK) ;
+ MIPS_H_MASK = temp;
+
+#ifdef DEBUG
+ printf("Leaving plb2800_eth_initialize()\n");
+#endif
+
+ return 1;
+}
+
+static int plb2800_eth_init(struct eth_device *dev, bd_t * bis)
+{
+#ifdef DEBUG
+ printf("Entering plb2800_eth_init()\n");
+#endif
+
+ plb2800_set_mac_addr(dev, dev->enetaddr);
+
+ rx_new = 0;
+
+#ifdef DEBUG
+ printf("Leaving plb2800_eth_init()\n");
+#endif
+
+ return 0;
+}
+
+
+static int plb2800_eth_send(struct eth_device *dev, volatile void *packet,
+ int length)
+{
+ int i;
+ int res = -1;
+ u32 temp;
+ mailbox_t * mb = MBOX_REG(0);
+ char * mem = MBOX_MEM(0);
+
+#ifdef DEBUG
+ printf("Entered plb2800_eth_send()\n");
+#endif
+
+ if (length <= 0)
+ {
+ printf ("%s: bad packet size: %d\n", dev->name, length);
+ goto Done;
+ }
+
+ if (length < 64)
+ {
+ length = 64;
+ }
+
+ temp = CMAC_CRX_CTRL_CG | ((length + 4) << CMAC_CRX_CTRL_PL_SHIFT);
+
+#ifdef DEBUG
+ printf("0 mb->stat = 0x%x\n", mb->stat);
+#endif
+
+ for(i = 0; mb->stat & (MBOX_STAT_CP | MBOX_STAT_MB); i++)
+ {
+ if (i >= TOUT_LOOP)
+ {
+ printf("%s: tx buffer not ready\n", dev->name);
+ printf("1 mb->stat = 0x%x\n", mb->stat);
+ goto Done;
+ }
+ }
+
+ /* For some strange reason, memcpy doesn't work, here!
+ */
+ do
+ {
+ int words = (length >> 2) + 1;
+ unsigned int* dst = (unsigned int*)(mem);
+ unsigned int* src = (unsigned int*)(packet);
+ for (i = 0; i < words; i++)
+ {
+ *dst = *src;
+ dst++;
+ src++;
+ };
+ } while(0);
+
+ CMAC_CRX_CTRL = temp;
+ mb->cmd = MBOX_STAT_CP;
+
+#ifdef DEBUG
+ printf("2 mb->stat = 0x%x\n", mb->stat);
+#endif
+
+ res = length;
+Done:
+
+#ifdef DEBUG
+ printf("Leaving plb2800_eth_send()\n");
+#endif
+
+ return res;
+}
+
+
+static int plb2800_eth_recv(struct eth_device *dev)
+{
+ int length = 0;
+ mailbox_t * mbox = MBOX_REG(3);
+ unsigned char * hdr = MBOX_MEM(3);
+ unsigned int stat;
+
+#ifdef DEBUG
+ printf("Entered plb2800_eth_recv()\n");
+#endif
+
+ for (;;)
+ {
+ stat = mbox->stat;
+
+ if (!(stat & MBOX_STAT_CP))
+ {
+ break;
+ }
+
+ length = ((*(hdr + 6) & 0x3f) << 8) + *(hdr + 7);
+ memcpy((void *)NetRxPackets[rx_new], hdr + 12, length);
+
+ stat &= ~MBOX_STAT_CP;
+ mbox->stat = stat;
+#ifdef DEBUG
+ {
+ int i;
+ for (i=0;i<length - 4;i++)
+ {
+ if (i % 16 == 0) printf("\n%04x: ", i);
+ printf("%02X ", NetRxPackets[rx_new][i]);
+ }
+ printf("\n");
+ }
+#endif
+
+ if (length)
+ {
+#ifdef DEBUG
+ printf("Received %d bytes\n", length);
+#endif
+ NetReceive((void*)(NetRxPackets[rx_new]),
+ length - 4);
+ }
+ else
+ {
+#if 1
+ printf("Zero length!!!\n");
+#endif
+ }
+
+ rx_new = (rx_new + 1) % NUM_RX_DESC;
+ }
+
+#ifdef DEBUG
+ printf("Leaving plb2800_eth_recv()\n");
+#endif
+
+ return length;
+}
+
+
+static void plb2800_eth_halt(struct eth_device *dev)
+{
+#ifdef DEBUG
+ printf("Entered plb2800_eth_halt()\n");
+#endif
+
+#ifdef DEBUG
+ printf("Leaving plb2800_eth_halt()\n");
+#endif
+}
+
+static void plb2800_set_mac_addr(struct eth_device *dev, unsigned char * addr)
+{
+ char packet[60];
+ ulong temp;
+ int ix;
+
+ if (mac_addr_set ||
+ NULL == addr || memcmp(addr, "\0\0\0\0\0\0", 6) == 0)
+ {
+ return;
+ }
+
+ /* send one packet through CPU port
+ * in order to learn system MAC address
+ */
+
+ /* Set DA_LOOKUP register */
+ temp = EN_MA_LEARN | (0 << DA_STATE_SHF) | (63 << DA_DEST_SHF);
+ DA_LOOKUP = temp;
+
+ /* Set MA_LEARN register */
+ temp = 50 << MA_DEST_SHF; /* static entry */
+ MA_LEARN = temp;
+
+ /* set destination address */
+ for (ix=0;ix<6;ix++)
+ packet[ix] = 0xff;
+
+ /* set source address = system MAC address */
+ for (ix=0;ix<6;ix++)
+ packet[6+ix] = addr[ix];
+
+ /* set type field */
+ packet[12]=0xaa;
+ packet[13]=0x55;
+
+ /* set data field */
+ for(ix=14;ix<60;ix++)
+ packet[ix] = 0x00;
+
+#ifdef DEBUG
+ for (ix=0;ix<6;ix++)
+ printf("mac_addr[%d]=%02X\n", ix, (unsigned char)packet[6+ix]);
+#endif
+
+ /* set one packet */
+ plb2800_eth_send(dev, packet, sizeof(packet));
+
+ /* delay for a while */
+ for(ix=0;ix<65535;ix++)
+ temp = ~temp;
+
+ /* Set CMAC_CTX_CTRL register */
+ temp = TSTAMP_MS; /* no autocast */
+ CMAC_CTX_CTRL = temp;
+
+ /* Set DA_LOOKUP register */
+ temp = EN_DA_LKUP;
+ DA_LOOKUP = temp;
+
+ mac_addr_set = 1;
+}
+
+static unsigned char * plb2800_get_mac_addr(void)
+{
+ static unsigned char addr[6];
+ char *tmp, *end;
+ int i;
+
+ tmp = getenv ("ethaddr");
+ if (NULL == tmp) return NULL;
+
+ for (i=0; i<6; i++) {
+ addr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
+ if (tmp)
+ tmp = (*end) ? end+1 : end;
+ }
+
+ return addr;
+}
+
+#endif /* CONFIG_PLB2800_ETHER */
diff --git a/drivers/net/rtl8019.c b/drivers/net/rtl8019.c
new file mode 100644
index 0000000..409a69f
--- /dev/null
+++ b/drivers/net/rtl8019.c
@@ -0,0 +1,282 @@
+/*
+ * Realtek 8019AS Ethernet
+ * (C) Copyright 2002-2003
+ * Xue Ligong(lgxue@hotmail.com),Wang Kehao, ESLAB, whut.edu.cn
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This code works in 8bit mode.
+ * If you need to work in 16bit mode, PLS change it!
+ */
+
+#include <common.h>
+#include <command.h>
+#include "rtl8019.h"
+#include <net.h>
+
+#ifdef CONFIG_DRIVER_RTL8019
+
+#if defined(CONFIG_CMD_NET)
+
+
+/* packet page register access functions */
+
+
+static unsigned char get_reg (unsigned int regno)
+{
+ return (*(unsigned char *) regno);
+}
+
+
+static void put_reg (unsigned int regno, unsigned char val)
+{
+ *(volatile unsigned char *) regno = val;
+}
+
+static void eth_reset (void)
+{
+ unsigned char ucTemp;
+
+ /* reset NIC */
+ ucTemp = get_reg (RTL8019_RESET);
+ put_reg (RTL8019_RESET, ucTemp);
+ put_reg (RTL8019_INTERRUPTSTATUS, 0xff);
+ udelay (2000); /* wait for 2ms */
+}
+
+void rtl8019_get_enetaddr (uchar * addr)
+{
+ unsigned char i;
+ unsigned char temp;
+
+ eth_reset ();
+
+ put_reg (RTL8019_COMMAND, RTL8019_REMOTEDMARD);
+ put_reg (RTL8019_DATACONFIGURATION, 0x48);
+ put_reg (RTL8019_REMOTESTARTADDRESS0, 0x00);
+ put_reg (RTL8019_REMOTESTARTADDRESS1, 0x00);
+ put_reg (RTL8019_REMOTEBYTECOUNT0, 12);
+ put_reg (RTL8019_REMOTEBYTECOUNT1, 0x00);
+ put_reg (RTL8019_COMMAND, RTL8019_REMOTEDMARD);
+ printf ("MAC: ");
+ for (i = 0; i < 6; i++) {
+ temp = get_reg (RTL8019_DMA_DATA);
+ *addr++ = temp;
+ temp = get_reg (RTL8019_DMA_DATA);
+ printf ("%x:", temp);
+ }
+
+ while ((!get_reg (RTL8019_INTERRUPTSTATUS) & 0x40));
+ printf ("\b \n");
+ put_reg (RTL8019_REMOTEBYTECOUNT0, 0x00);
+ put_reg (RTL8019_REMOTEBYTECOUNT1, 0x00);
+ put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
+}
+
+
+void eth_halt (void)
+{
+ put_reg (RTL8019_COMMAND, 0x01);
+}
+
+int eth_init (bd_t * bd)
+{
+ eth_reset ();
+ put_reg (RTL8019_COMMAND, RTL8019_PAGE0STOP);
+ put_reg (RTL8019_DATACONFIGURATION, 0x48);
+ put_reg (RTL8019_REMOTEBYTECOUNT0, 0x00);
+ put_reg (RTL8019_REMOTEBYTECOUNT1, 0x00);
+ put_reg (RTL8019_RECEIVECONFIGURATION, 0x00); /*00; */
+ put_reg (RTL8019_TRANSMITPAGE, RTL8019_TPSTART);
+ put_reg (RTL8019_TRANSMITCONFIGURATION, 0x02);
+ put_reg (RTL8019_PAGESTART, RTL8019_PSTART);
+ put_reg (RTL8019_BOUNDARY, RTL8019_PSTART);
+ put_reg (RTL8019_PAGESTOP, RTL8019_PSTOP);
+ put_reg (RTL8019_INTERRUPTSTATUS, 0xff);
+ put_reg (RTL8019_INTERRUPTMASK, 0x11); /*b; */
+ put_reg (RTL8019_COMMAND, RTL8019_PAGE1STOP);
+ put_reg (RTL8019_PHYSICALADDRESS0, bd->bi_enetaddr[0]);
+ put_reg (RTL8019_PHYSICALADDRESS1, bd->bi_enetaddr[1]);
+ put_reg (RTL8019_PHYSICALADDRESS2, bd->bi_enetaddr[2]);
+ put_reg (RTL8019_PHYSICALADDRESS3, bd->bi_enetaddr[3]);
+ put_reg (RTL8019_PHYSICALADDRESS4, bd->bi_enetaddr[4]);
+ put_reg (RTL8019_PHYSICALADDRESS5, bd->bi_enetaddr[5]);
+ put_reg (RTL8019_MULTIADDRESS0, 0x00);
+ put_reg (RTL8019_MULTIADDRESS1, 0x00);
+ put_reg (RTL8019_MULTIADDRESS2, 0x00);
+ put_reg (RTL8019_MULTIADDRESS3, 0x00);
+ put_reg (RTL8019_MULTIADDRESS4, 0x00);
+ put_reg (RTL8019_MULTIADDRESS5, 0x00);
+ put_reg (RTL8019_MULTIADDRESS6, 0x00);
+ put_reg (RTL8019_MULTIADDRESS7, 0x00);
+ put_reg (RTL8019_CURRENT, RTL8019_PSTART);
+ put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
+ put_reg (RTL8019_TRANSMITCONFIGURATION, 0xe0); /*58; */
+
+ return 0;
+}
+
+
+static unsigned char nic_to_pc (void)
+{
+ unsigned char rec_head_status;
+ unsigned char next_packet_pointer;
+ unsigned char packet_length0;
+ unsigned char packet_length1;
+ unsigned short rxlen = 0;
+ unsigned int i = 4;
+ unsigned char current_point;
+ unsigned char *addr;
+
+ /*
+ * The RTL8019's first 4B is packet status,page of next packet
+ * and packet length(2B).So we receive the fist 4B.
+ */
+ put_reg (RTL8019_REMOTESTARTADDRESS1, get_reg (RTL8019_BOUNDARY));
+ put_reg (RTL8019_REMOTESTARTADDRESS0, 0x00);
+ put_reg (RTL8019_REMOTEBYTECOUNT1, 0x00);
+ put_reg (RTL8019_REMOTEBYTECOUNT0, 0x04);
+
+ put_reg (RTL8019_COMMAND, RTL8019_REMOTEDMARD);
+
+ rec_head_status = get_reg (RTL8019_DMA_DATA);
+ next_packet_pointer = get_reg (RTL8019_DMA_DATA);
+ packet_length0 = get_reg (RTL8019_DMA_DATA);
+ packet_length1 = get_reg (RTL8019_DMA_DATA);
+
+ put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
+ /*Packet length is in two 8bit registers */
+ rxlen = packet_length1;
+ rxlen = (((rxlen << 8) & 0xff00) + packet_length0);
+ rxlen -= 4;
+
+ if (rxlen > PKTSIZE_ALIGN + PKTALIGN)
+ printf ("packet too big!\n");
+
+ /*Receive the packet */
+ put_reg (RTL8019_REMOTESTARTADDRESS0, 0x04);
+ put_reg (RTL8019_REMOTESTARTADDRESS1, get_reg (RTL8019_BOUNDARY));
+
+ put_reg (RTL8019_REMOTEBYTECOUNT0, (rxlen & 0xff));
+ put_reg (RTL8019_REMOTEBYTECOUNT1, ((rxlen >> 8) & 0xff));
+
+
+ put_reg (RTL8019_COMMAND, RTL8019_REMOTEDMARD);
+
+ for (addr = (unsigned char *) NetRxPackets[0], i = rxlen; i > 0; i--)
+ *addr++ = get_reg (RTL8019_DMA_DATA);
+ /* Pass the packet up to the protocol layers. */
+ NetReceive (NetRxPackets[0], rxlen);
+
+ while (!(get_reg (RTL8019_INTERRUPTSTATUS)) & 0x40); /* wait for the op. */
+
+ /*
+ * To test whether the packets are all received,get the
+ * location of current point
+ */
+ put_reg (RTL8019_COMMAND, RTL8019_PAGE1);
+ current_point = get_reg (RTL8019_CURRENT);
+ put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
+ put_reg (RTL8019_BOUNDARY, next_packet_pointer);
+ return current_point;
+}
+
+/* Get a data block via Ethernet */
+extern int eth_rx (void)
+{
+ unsigned char temp, current_point;
+
+ put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
+
+ while (1) {
+ temp = get_reg (RTL8019_INTERRUPTSTATUS);
+
+ if (temp & 0x90) {
+ /*overflow */
+ put_reg (RTL8019_COMMAND, RTL8019_PAGE0STOP);
+ udelay (2000);
+ put_reg (RTL8019_REMOTEBYTECOUNT0, 0);
+ put_reg (RTL8019_REMOTEBYTECOUNT1, 0);
+ put_reg (RTL8019_TRANSMITCONFIGURATION, 2);
+ do {
+ current_point = nic_to_pc ();
+ } while (get_reg (RTL8019_BOUNDARY) != current_point);
+
+ put_reg (RTL8019_TRANSMITCONFIGURATION, 0xe0);
+ }
+
+ if (temp & 0x1) {
+ /*packet received */
+ do {
+ put_reg (RTL8019_INTERRUPTSTATUS, 0x01);
+ current_point = nic_to_pc ();
+ } while (get_reg (RTL8019_BOUNDARY) != current_point);
+ }
+
+ if (!(temp & 0x1))
+ return 0;
+ /* done and exit. */
+ }
+}
+
+/* Send a data block via Ethernet. */
+extern int eth_send (volatile void *packet, int length)
+{
+ volatile unsigned char *p;
+ unsigned int pn;
+
+ pn = length;
+ p = (volatile unsigned char *) packet;
+
+ while (get_reg (RTL8019_COMMAND) == RTL8019_TRANSMIT);
+
+ put_reg (RTL8019_REMOTESTARTADDRESS0, 0);
+ put_reg (RTL8019_REMOTESTARTADDRESS1, RTL8019_TPSTART);
+ put_reg (RTL8019_REMOTEBYTECOUNT0, (pn & 0xff));
+ put_reg (RTL8019_REMOTEBYTECOUNT1, ((pn >> 8) & 0xff));
+
+ put_reg (RTL8019_COMMAND, RTL8019_REMOTEDMAWR);
+ while (pn > 0) {
+ put_reg (RTL8019_DMA_DATA, *p++);
+ pn--;
+ }
+
+ pn = length;
+
+ while (pn < 60) { /*Padding */
+ put_reg (RTL8019_DMA_DATA, 0);
+ pn++;
+ }
+
+ while (!(get_reg (RTL8019_INTERRUPTSTATUS)) & 0x40);
+
+ put_reg (RTL8019_INTERRUPTSTATUS, 0x40);
+ put_reg (RTL8019_TRANSMITPAGE, RTL8019_TPSTART);
+ put_reg (RTL8019_TRANSMITBYTECOUNT0, (pn & 0xff));
+ put_reg (RTL8019_TRANSMITBYTECOUNT1, ((pn >> 8 & 0xff)));
+ put_reg (RTL8019_COMMAND, RTL8019_TRANSMIT);
+
+ return 0;
+}
+
+#endif /* COMMANDS & CFG_NET */
+
+#endif /* CONFIG_DRIVER_RTL8019 */
diff --git a/drivers/net/rtl8019.h b/drivers/net/rtl8019.h
new file mode 100644
index 0000000..38116ad
--- /dev/null
+++ b/drivers/net/rtl8019.h
@@ -0,0 +1,117 @@
+/*
+ * Realtek 8019AS Ethernet
+ * (C) Copyright 2002-2003
+ * Xue Ligong(lgxue@hotmail.com),Wang Kehao, ESLAB, whut.edu.cn
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This code works in 8bit mode.
+ * If you need to work in 16bit mode, PLS change it!
+ */
+
+#include <asm/types.h>
+#include <config.h>
+
+
+#ifdef CONFIG_DRIVER_RTL8019
+
+#define RTL8019_REG_00 (RTL8019_BASE + 0x00)
+#define RTL8019_REG_01 (RTL8019_BASE + 0x01)
+#define RTL8019_REG_02 (RTL8019_BASE + 0x02)
+#define RTL8019_REG_03 (RTL8019_BASE + 0x03)
+#define RTL8019_REG_04 (RTL8019_BASE + 0x04)
+#define RTL8019_REG_05 (RTL8019_BASE + 0x05)
+#define RTL8019_REG_06 (RTL8019_BASE + 0x06)
+#define RTL8019_REG_07 (RTL8019_BASE + 0x07)
+#define RTL8019_REG_08 (RTL8019_BASE + 0x08)
+#define RTL8019_REG_09 (RTL8019_BASE + 0x09)
+#define RTL8019_REG_0a (RTL8019_BASE + 0x0a)
+#define RTL8019_REG_0b (RTL8019_BASE + 0x0b)
+#define RTL8019_REG_0c (RTL8019_BASE + 0x0c)
+#define RTL8019_REG_0d (RTL8019_BASE + 0x0d)
+#define RTL8019_REG_0e (RTL8019_BASE + 0x0e)
+#define RTL8019_REG_0f (RTL8019_BASE + 0x0f)
+#define RTL8019_REG_10 (RTL8019_BASE + 0x10)
+#define RTL8019_REG_1f (RTL8019_BASE + 0x1f)
+
+#define RTL8019_COMMAND RTL8019_REG_00
+#define RTL8019_PAGESTART RTL8019_REG_01
+#define RTL8019_PAGESTOP RTL8019_REG_02
+#define RTL8019_BOUNDARY RTL8019_REG_03
+#define RTL8019_TRANSMITSTATUS RTL8019_REG_04
+#define RTL8019_TRANSMITPAGE RTL8019_REG_04
+#define RTL8019_TRANSMITBYTECOUNT0 RTL8019_REG_05
+#define RTL8019_NCR RTL8019_REG_05
+#define RTL8019_TRANSMITBYTECOUNT1 RTL8019_REG_06
+#define RTL8019_INTERRUPTSTATUS RTL8019_REG_07
+#define RTL8019_CURRENT RTL8019_REG_07
+#define RTL8019_REMOTESTARTADDRESS0 RTL8019_REG_08
+#define RTL8019_CRDMA0 RTL8019_REG_08
+#define RTL8019_REMOTESTARTADDRESS1 RTL8019_REG_09
+#define RTL8019_CRDMA1 RTL8019_REG_09
+#define RTL8019_REMOTEBYTECOUNT0 RTL8019_REG_0a
+#define RTL8019_REMOTEBYTECOUNT1 RTL8019_REG_0b
+#define RTL8019_RECEIVESTATUS RTL8019_REG_0c
+#define RTL8019_RECEIVECONFIGURATION RTL8019_REG_0c
+#define RTL8019_TRANSMITCONFIGURATION RTL8019_REG_0d
+#define RTL8019_FAE_TALLY RTL8019_REG_0d
+#define RTL8019_DATACONFIGURATION RTL8019_REG_0e
+#define RTL8019_CRC_TALLY RTL8019_REG_0e
+#define RTL8019_INTERRUPTMASK RTL8019_REG_0f
+#define RTL8019_MISS_PKT_TALLY RTL8019_REG_0f
+#define RTL8019_PHYSICALADDRESS0 RTL8019_REG_01
+#define RTL8019_PHYSICALADDRESS1 RTL8019_REG_02
+#define RTL8019_PHYSICALADDRESS2 RTL8019_REG_03
+#define RTL8019_PHYSICALADDRESS3 RTL8019_REG_04
+#define RTL8019_PHYSICALADDRESS4 RTL8019_REG_05
+#define RTL8019_PHYSICALADDRESS5 RTL8019_REG_06
+#define RTL8019_MULTIADDRESS0 RTL8019_REG_08
+#define RTL8019_MULTIADDRESS1 RTL8019_REG_09
+#define RTL8019_MULTIADDRESS2 RTL8019_REG_0a
+#define RTL8019_MULTIADDRESS3 RTL8019_REG_0b
+#define RTL8019_MULTIADDRESS4 RTL8019_REG_0c
+#define RTL8019_MULTIADDRESS5 RTL8019_REG_0d
+#define RTL8019_MULTIADDRESS6 RTL8019_REG_0e
+#define RTL8019_MULTIADDRESS7 RTL8019_REG_0f
+#define RTL8019_DMA_DATA RTL8019_REG_10
+#define RTL8019_RESET RTL8019_REG_1f
+
+
+#define RTL8019_PAGE0 0x22
+#define RTL8019_PAGE1 0x62
+#define RTL8019_PAGE0DMAWRITE 0x12
+#define RTL8019_PAGE2DMAWRITE 0x92
+#define RTL8019_REMOTEDMAWR 0x12
+#define RTL8019_REMOTEDMARD 0x0A
+#define RTL8019_ABORTDMAWR 0x32
+#define RTL8019_ABORTDMARD 0x2A
+#define RTL8019_PAGE0STOP 0x21
+#define RTL8019_PAGE1STOP 0x61
+#define RTL8019_TRANSMIT 0x26
+#define RTL8019_TXINPROGRESS 0x04
+#define RTL8019_SEND 0x1A
+
+#define RTL8019_PSTART 0x4c
+#define RTL8019_PSTOP 0x80
+#define RTL8019_TPSTART 0x40
+
+
+#endif /*end of CONFIG_DRIVER_RTL8019*/
diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c
new file mode 100644
index 0000000..2367180
--- /dev/null
+++ b/drivers/net/rtl8139.c
@@ -0,0 +1,547 @@
+/*
+ * rtl8139.c : U-Boot driver for the RealTek RTL8139
+ *
+ * Masami Komiya (mkomiya@sonare.it)
+ *
+ * Most part is taken from rtl8139.c of etherboot
+ *
+ */
+
+/* rtl8139.c - etherboot driver for the Realtek 8139 chipset
+
+ ported from the linux driver written by Donald Becker
+ by Rainer Bawidamann (Rainer.Bawidamann@informatik.uni-ulm.de) 1999
+
+ This software may be used and distributed according to the terms
+ of the GNU Public License, incorporated herein by reference.
+
+ changes to the original driver:
+ - removed support for interrupts, switching to polling mode (yuck!)
+ - removed support for the 8129 chip (external MII)
+
+*/
+
+/*********************************************************************/
+/* Revision History */
+/*********************************************************************/
+
+/*
+ 28 Dec 2002 ken_yap@users.sourceforge.net (Ken Yap)
+ Put in virt_to_bus calls to allow Etherboot relocation.
+
+ 06 Apr 2001 ken_yap@users.sourceforge.net (Ken Yap)
+ Following email from Hyun-Joon Cha, added a disable routine, otherwise
+ NIC remains live and can crash the kernel later.
+
+ 4 Feb 2000 espenlaub@informatik.uni-ulm.de (Klaus Espenlaub)
+ Shuffled things around, removed the leftovers from the 8129 support
+ that was in the Linux driver and added a bit more 8139 definitions.
+ Moved the 8K receive buffer to a fixed, available address outside the
+ 0x98000-0x9ffff range. This is a bit of a hack, but currently the only
+ way to make room for the Etherboot features that need substantial amounts
+ of code like the ANSI console support. Currently the buffer is just below
+ 0x10000, so this even conforms to the tagged boot image specification,
+ which reserves the ranges 0x00000-0x10000 and 0x98000-0xA0000. My
+ interpretation of this "reserved" is that Etherboot may do whatever it
+ likes, as long as its environment is kept intact (like the BIOS
+ variables). Hopefully fixed rtl_poll() once and for all. The symptoms
+ were that if Etherboot was left at the boot menu for several minutes, the
+ first eth_poll failed. Seems like I am the only person who does this.
+ First of all I fixed the debugging code and then set out for a long bug
+ hunting session. It took me about a week full time work - poking around
+ various places in the driver, reading Don Becker's and Jeff Garzik's Linux
+ driver and even the FreeBSD driver (what a piece of crap!) - and
+ eventually spotted the nasty thing: the transmit routine was acknowledging
+ each and every interrupt pending, including the RxOverrun and RxFIFIOver
+ interrupts. This confused the RTL8139 thoroughly. It destroyed the
+ Rx ring contents by dumping the 2K FIFO contents right where we wanted to
+ get the next packet. Oh well, what fun.
+
+ 18 Jan 2000 mdc@thinguin.org (Marty Connor)
+ Drastically simplified error handling. Basically, if any error
+ in transmission or reception occurs, the card is reset.
+ Also, pointed all transmit descriptors to the same buffer to
+ save buffer space. This should decrease driver size and avoid
+ corruption because of exceeding 32K during runtime.
+
+ 28 Jul 1999 (Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de)
+ rtl_poll was quite broken: it used the RxOK interrupt flag instead
+ of the RxBufferEmpty flag which often resulted in very bad
+ transmission performace - below 1kBytes/s.
+
+*/
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+ defined(CONFIG_RTL8139)
+
+#define TICKS_PER_SEC CFG_HZ
+#define TICKS_PER_MS (TICKS_PER_SEC/1000)
+
+#define RTL_TIMEOUT (1*TICKS_PER_SEC)
+
+#define ETH_FRAME_LEN 1514
+#define ETH_ALEN 6
+#define ETH_ZLEN 60
+
+/* PCI Tuning Parameters
+ Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
+#define RX_FIFO_THRESH 4 /* Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 4 /* Maximum PCI burst, '4' is 256 bytes */
+#define TX_DMA_BURST 4 /* Calculate as 16<<val. */
+#define NUM_TX_DESC 4 /* Number of Tx descriptor registers. */
+#define TX_BUF_SIZE ETH_FRAME_LEN /* FCS is added by the chip */
+#define RX_BUF_LEN_IDX 0 /* 0, 1, 2 is allowed - 8,16,32K rx buffer */
+#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
+
+#undef DEBUG_TX
+#undef DEBUG_RX
+
+#define currticks() get_timer(0)
+#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
+#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+
+/* Symbolic offsets to registers. */
+enum RTL8139_registers {
+ MAC0=0, /* Ethernet hardware address. */
+ MAR0=8, /* Multicast filter. */
+ TxStatus0=0x10, /* Transmit status (four 32bit registers). */
+ TxAddr0=0x20, /* Tx descriptors (also four 32bit). */
+ RxBuf=0x30, RxEarlyCnt=0x34, RxEarlyStatus=0x36,
+ ChipCmd=0x37, RxBufPtr=0x38, RxBufAddr=0x3A,
+ IntrMask=0x3C, IntrStatus=0x3E,
+ TxConfig=0x40, RxConfig=0x44,
+ Timer=0x48, /* general-purpose counter. */
+ RxMissed=0x4C, /* 24 bits valid, write clears. */
+ Cfg9346=0x50, Config0=0x51, Config1=0x52,
+ TimerIntrReg=0x54, /* intr if gp counter reaches this value */
+ MediaStatus=0x58,
+ Config3=0x59,
+ MultiIntr=0x5C,
+ RevisionID=0x5E, /* revision of the RTL8139 chip */
+ TxSummary=0x60,
+ MII_BMCR=0x62, MII_BMSR=0x64, NWayAdvert=0x66, NWayLPAR=0x68,
+ NWayExpansion=0x6A,
+ DisconnectCnt=0x6C, FalseCarrierCnt=0x6E,
+ NWayTestReg=0x70,
+ RxCnt=0x72, /* packet received counter */
+ CSCR=0x74, /* chip status and configuration register */
+ PhyParm1=0x78,TwisterParm=0x7c,PhyParm2=0x80, /* undocumented */
+ /* from 0x84 onwards are a number of power management/wakeup frame
+ * definitions we will probably never need to know about. */
+};
+
+enum ChipCmdBits {
+ CmdReset=0x10, CmdRxEnb=0x08, CmdTxEnb=0x04, RxBufEmpty=0x01, };
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+ PCIErr=0x8000, PCSTimeout=0x4000, CableLenChange= 0x2000,
+ RxFIFOOver=0x40, RxUnderrun=0x20, RxOverflow=0x10,
+ TxErr=0x08, TxOK=0x04, RxErr=0x02, RxOK=0x01,
+};
+enum TxStatusBits {
+ TxHostOwns=0x2000, TxUnderrun=0x4000, TxStatOK=0x8000,
+ TxOutOfWindow=0x20000000, TxAborted=0x40000000,
+ TxCarrierLost=0x80000000,
+};
+enum RxStatusBits {
+ RxMulticast=0x8000, RxPhysical=0x4000, RxBroadcast=0x2000,
+ RxBadSymbol=0x0020, RxRunt=0x0010, RxTooLong=0x0008, RxCRCErr=0x0004,
+ RxBadAlign=0x0002, RxStatusOK=0x0001,
+};
+
+enum MediaStatusBits {
+ MSRTxFlowEnable=0x80, MSRRxFlowEnable=0x40, MSRSpeed10=0x08,
+ MSRLinkFail=0x04, MSRRxPauseFlag=0x02, MSRTxPauseFlag=0x01,
+};
+
+enum MIIBMCRBits {
+ BMCRReset=0x8000, BMCRSpeed100=0x2000, BMCRNWayEnable=0x1000,
+ BMCRRestartNWay=0x0200, BMCRDuplex=0x0100,
+};
+
+enum CSCRBits {
+ CSCR_LinkOKBit=0x0400, CSCR_LinkChangeBit=0x0800,
+ CSCR_LinkStatusBits=0x0f000, CSCR_LinkDownOffCmd=0x003c0,
+ CSCR_LinkDownCmd=0x0f3c0,
+};
+
+/* Bits in RxConfig. */
+enum rx_mode_bits {
+ RxCfgWrap=0x80,
+ AcceptErr=0x20, AcceptRunt=0x10, AcceptBroadcast=0x08,
+ AcceptMulticast=0x04, AcceptMyPhys=0x02, AcceptAllPhys=0x01,
+};
+
+static int ioaddr;
+static unsigned int cur_rx,cur_tx;
+
+/* The RTL8139 can only transmit from a contiguous, aligned memory block. */
+static unsigned char tx_buffer[TX_BUF_SIZE] __attribute__((aligned(4)));
+static unsigned char rx_ring[RX_BUF_LEN+16] __attribute__((aligned(4)));
+
+static int rtl8139_probe(struct eth_device *dev, bd_t *bis);
+static int read_eeprom(int location, int addr_len);
+static void rtl_reset(struct eth_device *dev);
+static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length);
+static int rtl_poll(struct eth_device *dev);
+static void rtl_disable(struct eth_device *dev);
+#ifdef CONFIG_MCAST_TFTP/* This driver already accepts all b/mcast */
+static int rtl_bcast_addr (struct eth_device *dev, u8 bcast_mac, u8 set)
+{
+ return (0);
+}
+#endif
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139},
+ {PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_8139},
+ {}
+};
+
+int rtl8139_initialize(bd_t *bis)
+{
+ pci_dev_t devno;
+ int card_number = 0;
+ struct eth_device *dev;
+ u32 iobase;
+ int idx=0;
+
+ while(1){
+ /* Find RTL8139 */
+ if ((devno = pci_find_devices(supported, idx++)) < 0)
+ break;
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+ iobase &= ~0xf;
+
+ debug ("rtl8139: REALTEK RTL8139 @0x%x\n", iobase);
+
+ dev = (struct eth_device *)malloc(sizeof *dev);
+
+ sprintf (dev->name, "RTL8139#%d", card_number);
+
+ dev->priv = (void *) devno;
+ dev->iobase = (int)bus_to_phys(iobase);
+ dev->init = rtl8139_probe;
+ dev->halt = rtl_disable;
+ dev->send = rtl_transmit;
+ dev->recv = rtl_poll;
+#ifdef CONFIG_MCAST_TFTP
+ dev->mcast = rtl_bcast_addr;
+#endif
+
+ eth_register (dev);
+
+ card_number++;
+
+ pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20);
+
+ udelay (10 * 1000);
+ }
+
+ return card_number;
+}
+
+static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
+{
+ int i;
+ int speed10, fullduplex;
+ int addr_len;
+ unsigned short *ap = (unsigned short *)dev->enetaddr;
+
+ ioaddr = dev->iobase;
+
+ /* Bring the chip out of low-power mode. */
+ outb(0x00, ioaddr + Config1);
+
+ addr_len = read_eeprom(0,8) == 0x8129 ? 8 : 6;
+ for (i = 0; i < 3; i++)
+ *ap++ = le16_to_cpu (read_eeprom(i + 7, addr_len));
+
+ speed10 = inb(ioaddr + MediaStatus) & MSRSpeed10;
+ fullduplex = inw(ioaddr + MII_BMCR) & BMCRDuplex;
+
+ rtl_reset(dev);
+
+ if (inb(ioaddr + MediaStatus) & MSRLinkFail) {
+ printf("Cable not connected or other link failure\n");
+ return(0);
+ }
+
+ return 1;
+}
+
+/* Serial EEPROM section. */
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
+#define EE_CS 0x08 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x00
+#define EE_WRITE_1 0x02
+#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
+#define EE_ENB (0x80 | EE_CS)
+
+/*
+ Delay between EEPROM clock transitions.
+ No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+*/
+
+#define eeprom_delay() inl(ee_addr)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD (5)
+#define EE_READ_CMD (6)
+#define EE_ERASE_CMD (7)
+
+static int read_eeprom(int location, int addr_len)
+{
+ int i;
+ unsigned int retval = 0;
+ long ee_addr = ioaddr + Cfg9346;
+ int read_cmd = location | (EE_READ_CMD << addr_len);
+
+ outb(EE_ENB & ~EE_CS, ee_addr);
+ outb(EE_ENB, ee_addr);
+ eeprom_delay();
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ outb(EE_ENB | dataval, ee_addr);
+ eeprom_delay();
+ outb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+ eeprom_delay();
+ }
+ outb(EE_ENB, ee_addr);
+ eeprom_delay();
+
+ for (i = 16; i > 0; i--) {
+ outb(EE_ENB | EE_SHIFT_CLK, ee_addr);
+ eeprom_delay();
+ retval = (retval << 1) | ((inb(ee_addr) & EE_DATA_READ) ? 1 : 0);
+ outb(EE_ENB, ee_addr);
+ eeprom_delay();
+ }
+
+ /* Terminate the EEPROM access. */
+ outb(~EE_CS, ee_addr);
+ eeprom_delay();
+ return retval;
+}
+
+static const unsigned int rtl8139_rx_config =
+ (RX_BUF_LEN_IDX << 11) |
+ (RX_FIFO_THRESH << 13) |
+ (RX_DMA_BURST << 8);
+
+static void set_rx_mode(struct eth_device *dev) {
+ unsigned int mc_filter[2];
+ int rx_mode;
+ /* !IFF_PROMISC */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+
+ outl(rtl8139_rx_config | rx_mode, ioaddr + RxConfig);
+
+ outl(mc_filter[0], ioaddr + MAR0 + 0);
+ outl(mc_filter[1], ioaddr + MAR0 + 4);
+}
+
+static void rtl_reset(struct eth_device *dev)
+{
+ int i;
+
+ outb(CmdReset, ioaddr + ChipCmd);
+
+ cur_rx = 0;
+ cur_tx = 0;
+
+ /* Give the chip 10ms to finish the reset. */
+ for (i=0; i<100; ++i){
+ if ((inb(ioaddr + ChipCmd) & CmdReset) == 0) break;
+ udelay (100); /* wait 100us */
+ }
+
+
+ for (i = 0; i < ETH_ALEN; i++)
+ outb(dev->enetaddr[i], ioaddr + MAC0 + i);
+
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
+ outl((RX_FIFO_THRESH<<13) | (RX_BUF_LEN_IDX<<11) | (RX_DMA_BURST<<8),
+ ioaddr + RxConfig); /* accept no frames yet! */
+ outl((TX_DMA_BURST<<8)|0x03000000, ioaddr + TxConfig);
+
+ /* The Linux driver changes Config1 here to use a different LED pattern
+ * for half duplex or full/autodetect duplex (for full/autodetect, the
+ * outputs are TX/RX, Link10/100, FULL, while for half duplex it uses
+ * TX/RX, Link100, Link10). This is messy, because it doesn't match
+ * the inscription on the mounting bracket. It should not be changed
+ * from the configuration EEPROM default, because the card manufacturer
+ * should have set that to match the card. */
+
+#ifdef DEBUG_RX
+ printf("rx ring address is %X\n",(unsigned long)rx_ring);
+#endif
+ outl(phys_to_bus((int)rx_ring), ioaddr + RxBuf);
+
+ /* If we add multicast support, the MAR0 register would have to be
+ * initialized to 0xffffffffffffffff (two 32 bit accesses). Etherboot
+ * only needs broadcast (for ARP/RARP/BOOTP/DHCP) and unicast. */
+
+ outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
+
+ outl(rtl8139_rx_config, ioaddr + RxConfig);
+
+ /* Start the chip's Tx and Rx process. */
+ outl(0, ioaddr + RxMissed);
+
+ /* set_rx_mode */
+ set_rx_mode(dev);
+
+ /* Disable all known interrupts by setting the interrupt mask. */
+ outw(0, ioaddr + IntrMask);
+}
+
+static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length)
+{
+ unsigned int status, to;
+ unsigned long txstatus;
+ unsigned int len = length;
+
+ ioaddr = dev->iobase;
+
+ memcpy((char *)tx_buffer, (char *)packet, (int)length);
+
+#ifdef DEBUG_TX
+ printf("sending %d bytes\n", len);
+#endif
+
+ /* Note: RTL8139 doesn't auto-pad, send minimum payload (another 4
+ * bytes are sent automatically for the FCS, totalling to 64 bytes). */
+ while (len < ETH_ZLEN) {
+ tx_buffer[len++] = '\0';
+ }
+
+ outl(phys_to_bus((int)tx_buffer), ioaddr + TxAddr0 + cur_tx*4);
+ outl(((TX_FIFO_THRESH<<11) & 0x003f0000) | len,
+ ioaddr + TxStatus0 + cur_tx*4);
+
+ to = currticks() + RTL_TIMEOUT;
+
+ do {
+ status = inw(ioaddr + IntrStatus);
+ /* Only acknlowledge interrupt sources we can properly handle
+ * here - the RxOverflow/RxFIFOOver MUST be handled in the
+ * rtl_poll() function. */
+ outw(status & (TxOK | TxErr | PCIErr), ioaddr + IntrStatus);
+ if ((status & (TxOK | TxErr | PCIErr)) != 0) break;
+ } while (currticks() < to);
+
+ txstatus = inl(ioaddr + TxStatus0 + cur_tx*4);
+
+ if (status & TxOK) {
+ cur_tx = (cur_tx + 1) % NUM_TX_DESC;
+#ifdef DEBUG_TX
+ printf("tx done (%d ticks), status %hX txstatus %X\n",
+ to-currticks(), status, txstatus);
+#endif
+ return length;
+ } else {
+#ifdef DEBUG_TX
+ printf("tx timeout/error (%d ticks), status %hX txstatus %X\n",
+ currticks()-to, status, txstatus);
+#endif
+ rtl_reset(dev);
+
+ return 0;
+ }
+}
+
+static int rtl_poll(struct eth_device *dev)
+{
+ unsigned int status;
+ unsigned int ring_offs;
+ unsigned int rx_size, rx_status;
+ int length=0;
+
+ ioaddr = dev->iobase;
+
+ if (inb(ioaddr + ChipCmd) & RxBufEmpty) {
+ return 0;
+ }
+
+ status = inw(ioaddr + IntrStatus);
+ /* See below for the rest of the interrupt acknowledges. */
+ outw(status & ~(RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
+
+#ifdef DEBUG_RX
+ printf("rtl_poll: int %hX ", status);
+#endif
+
+ ring_offs = cur_rx % RX_BUF_LEN;
+ rx_status = *(unsigned int*)KSEG1ADDR((rx_ring + ring_offs));
+ rx_size = rx_status >> 16;
+ rx_status &= 0xffff;
+
+ if ((rx_status & (RxBadSymbol|RxRunt|RxTooLong|RxCRCErr|RxBadAlign)) ||
+ (rx_size < ETH_ZLEN) || (rx_size > ETH_FRAME_LEN + 4)) {
+ printf("rx error %hX\n", rx_status);
+ rtl_reset(dev); /* this clears all interrupts still pending */
+ return 0;
+ }
+
+ /* Received a good packet */
+ length = rx_size - 4; /* no one cares about the FCS */
+ if (ring_offs+4+rx_size-4 > RX_BUF_LEN) {
+ int semi_count = RX_BUF_LEN - ring_offs - 4;
+ unsigned char rxdata[RX_BUF_LEN];
+
+ memcpy(rxdata, rx_ring + ring_offs + 4, semi_count);
+ memcpy(&(rxdata[semi_count]), rx_ring, rx_size-4-semi_count);
+
+ NetReceive(rxdata, length);
+#ifdef DEBUG_RX
+ printf("rx packet %d+%d bytes", semi_count,rx_size-4-semi_count);
+#endif
+ } else {
+ NetReceive(rx_ring + ring_offs + 4, length);
+#ifdef DEBUG_RX
+ printf("rx packet %d bytes", rx_size-4);
+#endif
+ }
+
+ cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+ outw(cur_rx - 16, ioaddr + RxBufPtr);
+ /* See RTL8139 Programming Guide V0.1 for the official handling of
+ * Rx overflow situations. The document itself contains basically no
+ * usable information, except for a few exception handling rules. */
+ outw(status & (RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
+ return length;
+}
+
+static void rtl_disable(struct eth_device *dev)
+{
+ int i;
+
+ ioaddr = dev->iobase;
+
+ /* reset the chip */
+ outb(CmdReset, ioaddr + ChipCmd);
+
+ /* Give the chip 10ms to finish the reset. */
+ for (i=0; i<100; ++i){
+ if ((inb(ioaddr + ChipCmd) & CmdReset) == 0) break;
+ udelay (100); /* wait 100us */
+ }
+}
+#endif
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
new file mode 100644
index 0000000..63ea2cc
--- /dev/null
+++ b/drivers/net/rtl8169.c
@@ -0,0 +1,888 @@
+/*
+ * rtl8169.c : U-Boot driver for the RealTek RTL8169
+ *
+ * Masami Komiya (mkomiya@sonare.it)
+ *
+ * Most part is taken from r8169.c of etherboot
+ *
+ */
+
+/**************************************************************************
+* r8169.c: Etherboot device driver for the RealTek RTL-8169 Gigabit
+* Written 2003 by Timothy Legge <tlegge@rogers.com>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+* Portions of this code based on:
+* r8169.c: A RealTek RTL-8169 Gigabit Ethernet driver
+* for Linux kernel 2.4.x.
+*
+* Written 2002 ShuChen <shuchen@realtek.com.tw>
+* See Linux Driver for full information
+*
+* Linux Driver Version 1.27a, 10.02.2002
+*
+* Thanks to:
+* Jean Chen of RealTek Semiconductor Corp. for
+* providing the evaluation NIC used to develop
+* this driver. RealTek's support for Etherboot
+* is appreciated.
+*
+* REVISION HISTORY:
+* ================
+*
+* v1.0 11-26-2003 timlegge Initial port of Linux driver
+* v1.5 01-17-2004 timlegge Initial driver output cleanup
+*
+* Indent Options: indent -kr -i8
+***************************************************************************/
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+ defined(CONFIG_RTL8169)
+
+#undef DEBUG_RTL8169
+#undef DEBUG_RTL8169_TX
+#undef DEBUG_RTL8169_RX
+
+#define drv_version "v1.5"
+#define drv_date "01-17-2004"
+
+static u32 ioaddr;
+
+/* Condensed operations for readability. */
+#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
+#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr))
+
+#define currticks() get_timer(0)
+#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
+#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+
+/* media options */
+#define MAX_UNITS 8
+static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 };
+
+/* MAC address length*/
+#define MAC_ADDR_LEN 6
+
+/* max supported gigabit ethernet frame size -- must be at least (dev->mtu+14+4).*/
+#define MAX_ETH_FRAME_SIZE 1536
+
+#define TX_FIFO_THRESH 256 /* In bytes */
+
+#define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define EarlyTxThld 0x3F /* 0x3F means NO early transmit */
+#define RxPacketMaxSize 0x0800 /* Maximum size supported is 16K-1 */
+#define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */
+
+#define NUM_TX_DESC 1 /* Number of Tx descriptor registers */
+#define NUM_RX_DESC 4 /* Number of Rx descriptor registers */
+#define RX_BUF_SIZE 1536 /* Rx Buffer size */
+#define RX_BUF_LEN 8192
+
+#define RTL_MIN_IO_SIZE 0x80
+#define TX_TIMEOUT (6*HZ)
+
+/* write/read MMIO register */
+#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg))
+#define RTL_R8(reg) readb (ioaddr + (reg))
+#define RTL_R16(reg) readw (ioaddr + (reg))
+#define RTL_R32(reg) ((unsigned long) readl (ioaddr + (reg)))
+
+#define ETH_FRAME_LEN MAX_ETH_FRAME_SIZE
+#define ETH_ALEN MAC_ADDR_LEN
+#define ETH_ZLEN 60
+
+enum RTL8169_registers {
+ MAC0 = 0, /* Ethernet hardware address. */
+ MAR0 = 8, /* Multicast filter. */
+ TxDescStartAddr = 0x20,
+ TxHDescStartAddr = 0x28,
+ FLASH = 0x30,
+ ERSR = 0x36,
+ ChipCmd = 0x37,
+ TxPoll = 0x38,
+ IntrMask = 0x3C,
+ IntrStatus = 0x3E,
+ TxConfig = 0x40,
+ RxConfig = 0x44,
+ RxMissed = 0x4C,
+ Cfg9346 = 0x50,
+ Config0 = 0x51,
+ Config1 = 0x52,
+ Config2 = 0x53,
+ Config3 = 0x54,
+ Config4 = 0x55,
+ Config5 = 0x56,
+ MultiIntr = 0x5C,
+ PHYAR = 0x60,
+ TBICSR = 0x64,
+ TBI_ANAR = 0x68,
+ TBI_LPAR = 0x6A,
+ PHYstatus = 0x6C,
+ RxMaxSize = 0xDA,
+ CPlusCmd = 0xE0,
+ RxDescStartAddr = 0xE4,
+ EarlyTxThres = 0xEC,
+ FuncEvent = 0xF0,
+ FuncEventMask = 0xF4,
+ FuncPresetState = 0xF8,
+ FuncForceEvent = 0xFC,
+};
+
+enum RTL8169_register_content {
+ /*InterruptStatusBits */
+ SYSErr = 0x8000,
+ PCSTimeout = 0x4000,
+ SWInt = 0x0100,
+ TxDescUnavail = 0x80,
+ RxFIFOOver = 0x40,
+ RxUnderrun = 0x20,
+ RxOverflow = 0x10,
+ TxErr = 0x08,
+ TxOK = 0x04,
+ RxErr = 0x02,
+ RxOK = 0x01,
+
+ /*RxStatusDesc */
+ RxRES = 0x00200000,
+ RxCRC = 0x00080000,
+ RxRUNT = 0x00100000,
+ RxRWT = 0x00400000,
+
+ /*ChipCmdBits */
+ CmdReset = 0x10,
+ CmdRxEnb = 0x08,
+ CmdTxEnb = 0x04,
+ RxBufEmpty = 0x01,
+
+ /*Cfg9346Bits */
+ Cfg9346_Lock = 0x00,
+ Cfg9346_Unlock = 0xC0,
+
+ /*rx_mode_bits */
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0x08,
+ AcceptMulticast = 0x04,
+ AcceptMyPhys = 0x02,
+ AcceptAllPhys = 0x01,
+
+ /*RxConfigBits */
+ RxCfgFIFOShift = 13,
+ RxCfgDMAShift = 8,
+
+ /*TxConfigBits */
+ TxInterFrameGapShift = 24,
+ TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
+
+ /*rtl8169_PHYstatus */
+ TBI_Enable = 0x80,
+ TxFlowCtrl = 0x40,
+ RxFlowCtrl = 0x20,
+ _1000bpsF = 0x10,
+ _100bps = 0x08,
+ _10bps = 0x04,
+ LinkStatus = 0x02,
+ FullDup = 0x01,
+
+ /*GIGABIT_PHY_registers */
+ PHY_CTRL_REG = 0,
+ PHY_STAT_REG = 1,
+ PHY_AUTO_NEGO_REG = 4,
+ PHY_1000_CTRL_REG = 9,
+
+ /*GIGABIT_PHY_REG_BIT */
+ PHY_Restart_Auto_Nego = 0x0200,
+ PHY_Enable_Auto_Nego = 0x1000,
+
+ /* PHY_STAT_REG = 1; */
+ PHY_Auto_Neco_Comp = 0x0020,
+
+ /* PHY_AUTO_NEGO_REG = 4; */
+ PHY_Cap_10_Half = 0x0020,
+ PHY_Cap_10_Full = 0x0040,
+ PHY_Cap_100_Half = 0x0080,
+ PHY_Cap_100_Full = 0x0100,
+
+ /* PHY_1000_CTRL_REG = 9; */
+ PHY_Cap_1000_Full = 0x0200,
+
+ PHY_Cap_Null = 0x0,
+
+ /*_MediaType*/
+ _10_Half = 0x01,
+ _10_Full = 0x02,
+ _100_Half = 0x04,
+ _100_Full = 0x08,
+ _1000_Full = 0x10,
+
+ /*_TBICSRBit*/
+ TBILinkOK = 0x02000000,
+};
+
+static struct {
+ const char *name;
+ u8 version; /* depend on RTL8169 docs */
+ u32 RxConfigMask; /* should clear the bits supported by this chip */
+} rtl_chip_info[] = {
+ {"RTL-8169", 0x00, 0xff7e1880,},
+ {"RTL-8169", 0x04, 0xff7e1880,},
+};
+
+enum _DescStatusBit {
+ OWNbit = 0x80000000,
+ EORbit = 0x40000000,
+ FSbit = 0x20000000,
+ LSbit = 0x10000000,
+};
+
+struct TxDesc {
+ u32 status;
+ u32 vlan_tag;
+ u32 buf_addr;
+ u32 buf_Haddr;
+};
+
+struct RxDesc {
+ u32 status;
+ u32 vlan_tag;
+ u32 buf_addr;
+ u32 buf_Haddr;
+};
+
+/* Define the TX Descriptor */
+static u8 tx_ring[NUM_TX_DESC * sizeof(struct TxDesc) + 256];
+/* __attribute__ ((aligned(256))); */
+
+/* Create a static buffer of size RX_BUF_SZ for each
+TX Descriptor. All descriptors point to a
+part of this buffer */
+static unsigned char txb[NUM_TX_DESC * RX_BUF_SIZE];
+
+/* Define the RX Descriptor */
+static u8 rx_ring[NUM_RX_DESC * sizeof(struct TxDesc) + 256];
+ /* __attribute__ ((aligned(256))); */
+
+/* Create a static buffer of size RX_BUF_SZ for each
+RX Descriptor All descriptors point to a
+part of this buffer */
+static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE];
+
+struct rtl8169_private {
+ void *mmio_addr; /* memory map physical address */
+ int chipset;
+ unsigned long cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */
+ unsigned long cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */
+ unsigned long dirty_tx;
+ unsigned char *TxDescArrays; /* Index of Tx Descriptor buffer */
+ unsigned char *RxDescArrays; /* Index of Rx Descriptor buffer */
+ struct TxDesc *TxDescArray; /* Index of 256-alignment Tx Descriptor buffer */
+ struct RxDesc *RxDescArray; /* Index of 256-alignment Rx Descriptor buffer */
+ unsigned char *RxBufferRings; /* Index of Rx Buffer */
+ unsigned char *RxBufferRing[NUM_RX_DESC]; /* Index of Rx Buffer array */
+ unsigned char *Tx_skbuff[NUM_TX_DESC];
+} tpx;
+
+static struct rtl8169_private *tpc;
+
+static const u16 rtl8169_intr_mask =
+ SYSErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver | TxErr |
+ TxOK | RxErr | RxOK;
+static const unsigned int rtl8169_rx_config =
+ (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_REALTEK, 0x8169},
+ {}
+};
+
+void mdio_write(int RegAddr, int value)
+{
+ int i;
+
+ RTL_W32(PHYAR, 0x80000000 | (RegAddr & 0xFF) << 16 | value);
+ udelay(1000);
+
+ for (i = 2000; i > 0; i--) {
+ /* Check if the RTL8169 has completed writing to the specified MII register */
+ if (!(RTL_R32(PHYAR) & 0x80000000)) {
+ break;
+ } else {
+ udelay(100);
+ }
+ }
+}
+
+int mdio_read(int RegAddr)
+{
+ int i, value = -1;
+
+ RTL_W32(PHYAR, 0x0 | (RegAddr & 0xFF) << 16);
+ udelay(1000);
+
+ for (i = 2000; i > 0; i--) {
+ /* Check if the RTL8169 has completed retrieving data from the specified MII register */
+ if (RTL_R32(PHYAR) & 0x80000000) {
+ value = (int) (RTL_R32(PHYAR) & 0xFFFF);
+ break;
+ } else {
+ udelay(100);
+ }
+ }
+ return value;
+}
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+static int rtl8169_init_board(struct eth_device *dev)
+{
+ int i;
+ u32 tmp;
+
+#ifdef DEBUG_RTL8169
+ printf ("%s\n", __FUNCTION__);
+#endif
+ ioaddr = dev->iobase;
+
+ /* Soft reset the chip. */
+ RTL_W8(ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 1000; i > 0; i--)
+ if ((RTL_R8(ChipCmd) & CmdReset) == 0)
+ break;
+ else
+ udelay(10);
+
+ /* identify chip attached to board */
+ tmp = RTL_R32(TxConfig);
+ tmp = ((tmp & 0x7c000000) + ((tmp & 0x00800000) << 2)) >> 24;
+
+ for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--){
+ if (tmp == rtl_chip_info[i].version) {
+ tpc->chipset = i;
+ goto match;
+ }
+ }
+
+ /* if unknown chip, assume array element #0, original RTL-8169 in this case */
+ printf("PCI device %s: unknown chip version, assuming RTL-8169\n", dev->name);
+ printf("PCI device: TxConfig = 0x%hX\n", (unsigned long) RTL_R32(TxConfig));
+ tpc->chipset = 0;
+
+match:
+ return 0;
+}
+
+/**************************************************************************
+RECV - Receive a frame
+***************************************************************************/
+static int rtl_recv(struct eth_device *dev)
+{
+ /* return true if there's an ethernet packet ready to read */
+ /* nic->packet should contain data on return */
+ /* nic->packetlen should contain length of data */
+ int cur_rx;
+ int length = 0;
+
+#ifdef DEBUG_RTL8169_RX
+ printf ("%s\n", __FUNCTION__);
+#endif
+ ioaddr = dev->iobase;
+
+ cur_rx = tpc->cur_rx;
+ if ((tpc->RxDescArray[cur_rx].status & OWNbit) == 0) {
+ if (!(tpc->RxDescArray[cur_rx].status & RxRES)) {
+ unsigned char rxdata[RX_BUF_LEN];
+ length = (int) (tpc->RxDescArray[cur_rx].
+ status & 0x00001FFF) - 4;
+
+ memcpy(rxdata, tpc->RxBufferRing[cur_rx], length);
+ NetReceive(rxdata, length);
+
+ if (cur_rx == NUM_RX_DESC - 1)
+ tpc->RxDescArray[cur_rx].status =
+ (OWNbit | EORbit) + RX_BUF_SIZE;
+ else
+ tpc->RxDescArray[cur_rx].status =
+ OWNbit + RX_BUF_SIZE;
+ tpc->RxDescArray[cur_rx].buf_addr =
+ virt_to_bus(tpc->RxBufferRing[cur_rx]);
+ } else {
+ puts("Error Rx");
+ }
+ cur_rx = (cur_rx + 1) % NUM_RX_DESC;
+ tpc->cur_rx = cur_rx;
+ return 1;
+
+ }
+ tpc->cur_rx = cur_rx;
+ return (0); /* initially as this is called to flush the input */
+}
+
+#define HZ 1000
+/**************************************************************************
+SEND - Transmit a frame
+***************************************************************************/
+static int rtl_send(struct eth_device *dev, volatile void *packet, int length)
+{
+ /* send the packet to destination */
+
+ u32 to;
+ u8 *ptxb;
+ int entry = tpc->cur_tx % NUM_TX_DESC;
+ u32 len = length;
+
+#ifdef DEBUG_RTL8169_TX
+ int stime = currticks();
+ printf ("%s\n", __FUNCTION__);
+ printf("sending %d bytes\n", len);
+#endif
+
+ ioaddr = dev->iobase;
+
+ /* point to the current txb incase multiple tx_rings are used */
+ ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE];
+ memcpy(ptxb, (char *)packet, (int)length);
+
+ while (len < ETH_ZLEN)
+ ptxb[len++] = '\0';
+
+ tpc->TxDescArray[entry].buf_addr = virt_to_bus(ptxb);
+ if (entry != (NUM_TX_DESC - 1)) {
+ tpc->TxDescArray[entry].status =
+ (OWNbit | FSbit | LSbit) | ((len > ETH_ZLEN) ?
+ len : ETH_ZLEN);
+ } else {
+ tpc->TxDescArray[entry].status =
+ (OWNbit | EORbit | FSbit | LSbit) |
+ ((len > ETH_ZLEN) ? length : ETH_ZLEN);
+ }
+ RTL_W8(TxPoll, 0x40); /* set polling bit */
+
+ tpc->cur_tx++;
+ to = currticks() + TX_TIMEOUT;
+ while ((tpc->TxDescArray[entry].status & OWNbit) && (currticks() < to)); /* wait */
+
+ if (currticks() >= to) {
+#ifdef DEBUG_RTL8169_TX
+ puts ("tx timeout/error\n");
+ printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+#endif
+ return 0;
+ } else {
+#ifdef DEBUG_RTL8169_TX
+ puts("tx done\n");
+#endif
+ return length;
+ }
+}
+
+static void rtl8169_set_rx_mode(struct eth_device *dev)
+{
+ u32 mc_filter[2]; /* Multicast hash filter */
+ int rx_mode;
+ u32 tmp = 0;
+
+#ifdef DEBUG_RTL8169
+ printf ("%s\n", __FUNCTION__);
+#endif
+
+ /* IFF_ALLMULTI */
+ /* Too many to filter perfectly -- accept all multicasts. */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+
+ tmp = rtl8169_rx_config | rx_mode | (RTL_R32(RxConfig) &
+ rtl_chip_info[tpc->chipset].RxConfigMask);
+
+ RTL_W32(RxConfig, tmp);
+ RTL_W32(MAR0 + 0, mc_filter[0]);
+ RTL_W32(MAR0 + 4, mc_filter[1]);
+}
+
+static void rtl8169_hw_start(struct eth_device *dev)
+{
+ u32 i;
+
+#ifdef DEBUG_RTL8169
+ int stime = currticks();
+ printf ("%s\n", __FUNCTION__);
+#endif
+
+#if 0
+ /* Soft reset the chip. */
+ RTL_W8(ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 1000; i > 0; i--) {
+ if ((RTL_R8(ChipCmd) & CmdReset) == 0)
+ break;
+ else
+ udelay(10);
+ }
+#endif
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ /* For gigabit rtl8169 */
+ RTL_W16(RxMaxSize, RxPacketMaxSize);
+
+ /* Set Rx Config register */
+ i = rtl8169_rx_config | (RTL_R32(RxConfig) &
+ rtl_chip_info[tpc->chipset].RxConfigMask);
+ RTL_W32(RxConfig, i);
+
+ /* Set DMA burst size and Interframe Gap Time */
+ RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) |
+ (InterFrameGap << TxInterFrameGapShift));
+
+
+ tpc->cur_rx = 0;
+
+ RTL_W32(TxDescStartAddr, virt_to_le32desc(tpc->TxDescArray));
+ RTL_W32(RxDescStartAddr, virt_to_le32desc(tpc->RxDescArray));
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+ udelay(10);
+
+ RTL_W32(RxMissed, 0);
+
+ rtl8169_set_rx_mode(dev);
+
+ /* no early-rx interrupts */
+ RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
+
+#ifdef DEBUG_RTL8169
+ printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+#endif
+}
+
+static void rtl8169_init_ring(struct eth_device *dev)
+{
+ int i;
+
+#ifdef DEBUG_RTL8169
+ int stime = currticks();
+ printf ("%s\n", __FUNCTION__);
+#endif
+
+ tpc->cur_rx = 0;
+ tpc->cur_tx = 0;
+ tpc->dirty_tx = 0;
+ memset(tpc->TxDescArray, 0x0, NUM_TX_DESC * sizeof(struct TxDesc));
+ memset(tpc->RxDescArray, 0x0, NUM_RX_DESC * sizeof(struct RxDesc));
+
+ for (i = 0; i < NUM_TX_DESC; i++) {
+ tpc->Tx_skbuff[i] = &txb[i];
+ }
+
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ if (i == (NUM_RX_DESC - 1))
+ tpc->RxDescArray[i].status =
+ (OWNbit | EORbit) + RX_BUF_SIZE;
+ else
+ tpc->RxDescArray[i].status = OWNbit + RX_BUF_SIZE;
+
+ tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
+ tpc->RxDescArray[i].buf_addr =
+ virt_to_bus(tpc->RxBufferRing[i]);
+ }
+
+#ifdef DEBUG_RTL8169
+ printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+#endif
+}
+
+/**************************************************************************
+RESET - Finish setting up the ethernet interface
+***************************************************************************/
+static void rtl_reset(struct eth_device *dev, bd_t *bis)
+{
+ int i;
+ u8 diff;
+ u32 TxPhyAddr, RxPhyAddr;
+
+#ifdef DEBUG_RTL8169
+ int stime = currticks();
+ printf ("%s\n", __FUNCTION__);
+#endif
+
+ tpc->TxDescArrays = tx_ring;
+ if (tpc->TxDescArrays == 0)
+ puts("Allot Error");
+ /* Tx Desscriptor needs 256 bytes alignment; */
+ TxPhyAddr = virt_to_bus(tpc->TxDescArrays);
+ diff = 256 - (TxPhyAddr - ((TxPhyAddr >> 8) << 8));
+ TxPhyAddr += diff;
+ tpc->TxDescArray = (struct TxDesc *) (tpc->TxDescArrays + diff);
+
+ tpc->RxDescArrays = rx_ring;
+ /* Rx Desscriptor needs 256 bytes alignment; */
+ RxPhyAddr = virt_to_bus(tpc->RxDescArrays);
+ diff = 256 - (RxPhyAddr - ((RxPhyAddr >> 8) << 8));
+ RxPhyAddr += diff;
+ tpc->RxDescArray = (struct RxDesc *) (tpc->RxDescArrays + diff);
+
+ if (tpc->TxDescArrays == NULL || tpc->RxDescArrays == NULL) {
+ puts("Allocate RxDescArray or TxDescArray failed\n");
+ return;
+ }
+
+ rtl8169_init_ring(dev);
+ rtl8169_hw_start(dev);
+ /* Construct a perfect filter frame with the mac address as first match
+ * and broadcast for all others */
+ for (i = 0; i < 192; i++)
+ txb[i] = 0xFF;
+
+ txb[0] = dev->enetaddr[0];
+ txb[1] = dev->enetaddr[1];
+ txb[2] = dev->enetaddr[2];
+ txb[3] = dev->enetaddr[3];
+ txb[4] = dev->enetaddr[4];
+ txb[5] = dev->enetaddr[5];
+
+#ifdef DEBUG_RTL8169
+ printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+#endif
+}
+
+/**************************************************************************
+HALT - Turn off ethernet interface
+***************************************************************************/
+static void rtl_halt(struct eth_device *dev)
+{
+ int i;
+
+#ifdef DEBUG_RTL8169
+ printf ("%s\n", __FUNCTION__);
+#endif
+
+ ioaddr = dev->iobase;
+
+ /* Stop the chip's Tx and Rx DMA processes. */
+ RTL_W8(ChipCmd, 0x00);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16(IntrMask, 0x0000);
+
+ RTL_W32(RxMissed, 0);
+
+ tpc->TxDescArrays = NULL;
+ tpc->RxDescArrays = NULL;
+ tpc->TxDescArray = NULL;
+ tpc->RxDescArray = NULL;
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ tpc->RxBufferRing[i] = NULL;
+ }
+}
+
+/**************************************************************************
+INIT - Look for an adapter, this routine's visible to the outside
+***************************************************************************/
+
+#define board_found 1
+#define valid_link 0
+static int rtl_init(struct eth_device *dev, bd_t *bis)
+{
+ static int board_idx = -1;
+ static int printed_version = 0;
+ int i, rc;
+ int option = -1, Cap10_100 = 0, Cap1000 = 0;
+
+#ifdef DEBUG_RTL8169
+ printf ("%s\n", __FUNCTION__);
+#endif
+
+ ioaddr = dev->iobase;
+
+ board_idx++;
+
+ printed_version = 1;
+
+ /* point to private storage */
+ tpc = &tpx;
+
+ rc = rtl8169_init_board(dev);
+ if (rc)
+ return rc;
+
+ /* Get MAC address. FIXME: read EEPROM */
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+ dev->enetaddr[i] = RTL_R8(MAC0 + i);
+
+#ifdef DEBUG_RTL8169
+ printf("MAC Address");
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+ printf(":%02x", dev->enetaddr[i]);
+ putc('\n');
+#endif
+
+#ifdef DEBUG_RTL8169
+ /* Print out some hardware info */
+ printf("%s: at ioaddr 0x%x\n", dev->name, ioaddr);
+#endif
+
+ /* if TBI is not endbled */
+ if (!(RTL_R8(PHYstatus) & TBI_Enable)) {
+ int val = mdio_read(PHY_AUTO_NEGO_REG);
+
+ option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
+ /* Force RTL8169 in 10/100/1000 Full/Half mode. */
+ if (option > 0) {
+#ifdef DEBUG_RTL8169
+ printf("%s: Force-mode Enabled.\n", dev->name);
+#endif
+ Cap10_100 = 0, Cap1000 = 0;
+ switch (option) {
+ case _10_Half:
+ Cap10_100 = PHY_Cap_10_Half;
+ Cap1000 = PHY_Cap_Null;
+ break;
+ case _10_Full:
+ Cap10_100 = PHY_Cap_10_Full;
+ Cap1000 = PHY_Cap_Null;
+ break;
+ case _100_Half:
+ Cap10_100 = PHY_Cap_100_Half;
+ Cap1000 = PHY_Cap_Null;
+ break;
+ case _100_Full:
+ Cap10_100 = PHY_Cap_100_Full;
+ Cap1000 = PHY_Cap_Null;
+ break;
+ case _1000_Full:
+ Cap10_100 = PHY_Cap_Null;
+ Cap1000 = PHY_Cap_1000_Full;
+ break;
+ default:
+ break;
+ }
+ mdio_write(PHY_AUTO_NEGO_REG, Cap10_100 | (val & 0x1F)); /* leave PHY_AUTO_NEGO_REG bit4:0 unchanged */
+ mdio_write(PHY_1000_CTRL_REG, Cap1000);
+ } else {
+#ifdef DEBUG_RTL8169
+ printf("%s: Auto-negotiation Enabled.\n",
+ dev->name);
+#endif
+ /* enable 10/100 Full/Half Mode, leave PHY_AUTO_NEGO_REG bit4:0 unchanged */
+ mdio_write(PHY_AUTO_NEGO_REG,
+ PHY_Cap_10_Half | PHY_Cap_10_Full |
+ PHY_Cap_100_Half | PHY_Cap_100_Full |
+ (val & 0x1F));
+
+ /* enable 1000 Full Mode */
+ mdio_write(PHY_1000_CTRL_REG, PHY_Cap_1000_Full);
+
+ }
+
+ /* Enable auto-negotiation and restart auto-nigotiation */
+ mdio_write(PHY_CTRL_REG,
+ PHY_Enable_Auto_Nego | PHY_Restart_Auto_Nego);
+ udelay(100);
+
+ /* wait for auto-negotiation process */
+ for (i = 10000; i > 0; i--) {
+ /* check if auto-negotiation complete */
+ if (mdio_read(PHY_STAT_REG) & PHY_Auto_Neco_Comp) {
+ udelay(100);
+ option = RTL_R8(PHYstatus);
+ if (option & _1000bpsF) {
+#ifdef DEBUG_RTL8169
+ printf("%s: 1000Mbps Full-duplex operation.\n",
+ dev->name);
+#endif
+ } else {
+#ifdef DEBUG_RTL8169
+ printf
+ ("%s: %sMbps %s-duplex operation.\n",
+ dev->name,
+ (option & _100bps) ? "100" :
+ "10",
+ (option & FullDup) ? "Full" :
+ "Half");
+#endif
+ }
+ break;
+ } else {
+ udelay(100);
+ }
+ } /* end for-loop to wait for auto-negotiation process */
+
+ } else {
+ udelay(100);
+#ifdef DEBUG_RTL8169
+ printf
+ ("%s: 1000Mbps Full-duplex operation, TBI Link %s!\n",
+ dev->name,
+ (RTL_R32(TBICSR) & TBILinkOK) ? "OK" : "Failed");
+#endif
+ }
+
+ return 1;
+}
+
+int rtl8169_initialize(bd_t *bis)
+{
+ pci_dev_t devno;
+ int card_number = 0;
+ struct eth_device *dev;
+ u32 iobase;
+ int idx=0;
+
+ while(1){
+ /* Find RTL8169 */
+ if ((devno = pci_find_devices(supported, idx++)) < 0)
+ break;
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+ iobase &= ~0xf;
+
+ debug ("rtl8169: REALTEK RTL8169 @0x%x\n", iobase);
+
+ dev = (struct eth_device *)malloc(sizeof *dev);
+
+ sprintf (dev->name, "RTL8169#%d", card_number);
+
+ dev->priv = (void *) devno;
+ dev->iobase = (int)bus_to_phys(iobase);
+
+ dev->init = rtl_reset;
+ dev->halt = rtl_halt;
+ dev->send = rtl_send;
+ dev->recv = rtl_recv;
+
+ eth_register (dev);
+
+ rtl_init(dev, bis);
+
+ card_number++;
+ }
+ return card_number;
+}
+
+#endif
diff --git a/drivers/net/s3c4510b_eth.c b/drivers/net/s3c4510b_eth.c
new file mode 100644
index 0000000..3d9066a
--- /dev/null
+++ b/drivers/net/s3c4510b_eth.c
@@ -0,0 +1,246 @@
+/***********************************************************************
+ *
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description: Ethernet interface for Samsung S3C4510B SoC
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_S3C4510_ETH
+
+#include <command.h>
+#include <net.h>
+#include <asm/hardware.h>
+#include "s3c4510b_eth.h"
+
+static TX_FrameDescriptor txFDbase[ETH_MaxTxFrames];
+static MACFrame txFrameBase[ETH_MaxTxFrames];
+static RX_FrameDescriptor rxFDbase[PKTBUFSRX];
+static ETH m_eth;
+
+static s32 TxFDinit( ETH *eth) {
+
+ s32 i;
+ MACFrame *txFrmBase;
+
+ /* disable cache for access to the TX buffers */
+ txFrmBase = (MACFrame *)( (u32)txFrameBase | CACHE_DISABLE_MASK);
+
+ /* store start of Tx descriptors and set current */
+ eth->m_curTX_FD = (TX_FrameDescriptor *) ((u32)txFDbase | CACHE_DISABLE_MASK);
+ eth->m_baseTX_FD = eth->m_curTX_FD;
+
+ for ( i = 0; i < ETH_MaxTxFrames; i++) {
+ eth->m_baseTX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)&txFrmBase[i];
+ eth->m_baseTX_FD[i].m_frameDataPtr.bf.owner = 0x0; /* CPU owner */
+ eth->m_baseTX_FD[i].m_opt.ui = 0x0;
+ eth->m_baseTX_FD[i].m_status.ui = 0x0;
+ eth->m_baseTX_FD[i].m_nextFD = &eth->m_baseTX_FD[i+1];
+ }
+
+ /* make the list circular */
+ eth->m_baseTX_FD[i-1].m_nextFD = &eth->m_baseTX_FD[0];
+
+ PUT_REG( REG_BDMATXPTR, (u32)eth->m_curTX_FD);
+
+ return 0;
+}
+
+static s32 RxFDinit( ETH *eth) {
+
+ s32 i;
+ /* MACFrame *rxFrmBase; */
+
+ /* disable cache for access to the RX buffers */
+ /* rxFrmBase = (MACFrame *)( (u32)rxFrameBase | CACHE_DISABLE_MASK); */
+
+ /* store start of Rx descriptors and set current */
+ eth->m_curRX_FD = (RX_FrameDescriptor *)((u32)rxFDbase | CACHE_DISABLE_MASK);
+ eth->m_baseRX_FD = eth->m_curRX_FD;
+ for ( i = 0; i < PKTBUFSRX; i++) {
+ eth->m_baseRX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)NetRxPackets[i] | CACHE_DISABLE_MASK;
+ eth->m_baseRX_FD[i].m_frameDataPtr.bf.owner = 0x1; /* BDMA owner */
+ eth->m_baseRX_FD[i].m_reserved = 0x0;
+ eth->m_baseRX_FD[i].m_status.ui = 0x0;
+ eth->m_baseRX_FD[i].m_nextFD = &eth->m_baseRX_FD[i+1];
+ }
+
+ /* make the list circular */
+ eth->m_baseRX_FD[i-1].m_nextFD = &eth->m_baseRX_FD[0];
+
+ PUT_REG( REG_BDMARXPTR, (u32)eth->m_curRX_FD);
+
+ return 0;
+}
+
+/*
+ * Public u-boot interface functions below
+ */
+
+int eth_init(bd_t *bis)
+{
+
+ ETH *eth = &m_eth;
+
+ /* store our MAC address */
+ eth->m_mac = bis->bi_enetaddr;
+
+ /* setup DBMA and MAC */
+ PUT_REG( REG_BDMARXCON, ETH_BRxRS); /* reset BDMA RX machine */
+ PUT_REG( REG_BDMATXCON, ETH_BTxRS); /* reset BDMA TX machine */
+ PUT_REG( REG_MACCON , ETH_SwReset); /* reset MAC machine */
+ PUT_REG( REG_BDMARXLSZ, sizeof(MACFrame));
+ PUT_REG( REG_MACCON , 0); /* reset MAC machine */
+
+ /* init frame descriptors */
+ TxFDinit( eth);
+ RxFDinit( eth);
+
+ /* init the CAM with our MAC address */
+ PUT_REG( REG_CAM_BASE, (eth->m_mac[0] << 24) |
+ (eth->m_mac[1] << 16) |
+ (eth->m_mac[2] << 8) |
+ (eth->m_mac[3]));
+ PUT_REG( REG_CAM_BASE + 0x4, (eth->m_mac[4] << 24) |
+ (eth->m_mac[5] << 16));
+
+ /* enable CAM address 1 -- the MAC we just loaded */
+ PUT_REG( REG_CAMEN, 0x1);
+
+ PUT_REG( REG_CAMCON,
+ ETH_BroadAcc | /* accept broadcast packetes */
+ ETH_CompEn); /* enable compare mode (check against the CAM) */
+
+ /* configure the BDMA Transmitter control */
+ PUT_REG( REG_BDMATXCON,
+ ETH_BTxBRST | /* BDMA Tx burst size 16 words */
+ ETH_BTxMSL110 | /* BDMA Tx wait to fill 6/8 of the BDMA */
+ ETH_BTxSTSKO | /* BDMA Tx interrupt(Stop) on non-owner TX FD */
+ ETH_BTxEn); /* BDMA Tx Enable */
+
+ /* configure the MAC Transmitter control */
+ PUT_REG( REG_MACTXCON,
+ ETH_EnComp | /* interrupt when the MAC transmits or discards packet */
+ ETH_TxEn); /* MAC transmit enable */
+
+ /* configure the BDMA Receiver control */
+ PUT_REG( REG_BDMARXCON,
+ ETH_BRxBRST | /* BDMA Rx Burst Size 16 words */
+ ETH_BRxSTSKO | /* BDMA Rx interrupt(Stop) on non-owner RX FD */
+ ETH_BRxMAINC | /* BDMA Rx Memory Address increment */
+ ETH_BRxDIE | /* BDMA Rx Every Received Frame Interrupt Enable */
+ ETH_BRxNLIE | /* BDMA Rx NULL List Interrupt Enable */
+ ETH_BRxNOIE | /* BDMA Rx Not Owner Interrupt Enable */
+ ETH_BRxLittle | /* BDMA Rx Little endian */
+ ETH_BRxEn); /* BDMA Rx Enable */
+
+ /* configure the MAC Receiver control */
+ PUT_REG( REG_MACRXCON,
+ ETH_RxEn); /* MAC ETH_RxEn */
+
+ return 0;
+
+}
+
+/* Send a packet */
+s32 eth_send(volatile void *packet, s32 length)
+{
+
+ u32 i;
+ ETH *eth = &m_eth;
+
+ if ( eth->m_curTX_FD->m_frameDataPtr.bf.owner) {
+ printf("eth_send(): TX Frame. CPU not owner.\n");
+ return -1;
+ }
+
+ /* copy user data into frame data pointer */
+ memcpy((void *)((u32)(eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr)),
+ (void *)packet,
+ length);
+
+ /* Set TX Frame flags */
+ eth->m_curTX_FD->m_opt.bf.widgetAlign = 0;
+ eth->m_curTX_FD->m_opt.bf.frameDataDir = 1;
+ eth->m_curTX_FD->m_opt.bf.littleEndian = 1;
+ eth->m_curTX_FD->m_opt.bf.macTxIrqEnbl = 1;
+ eth->m_curTX_FD->m_opt.bf.no_crc = 0;
+ eth->m_curTX_FD->m_opt.bf.no_padding = 0;
+
+ /* Set TX Frame length */
+ eth->m_curTX_FD->m_status.bf.len = length;
+
+ /* Change ownership to BDMA */
+ eth->m_curTX_FD->m_frameDataPtr.bf.owner = 1;
+
+ /* Enable MAC and BDMA Tx control register */
+ SET_REG( REG_BDMATXCON, ETH_BTxEn);
+ SET_REG( REG_MACTXCON, ETH_TxEn);
+
+ /* poll on TX completion status */
+ while ( !eth->m_curTX_FD->m_status.bf.complete) {
+ /* sleep */
+ for ( i = 0; i < 0x10000; i ++);
+ }
+
+ /* Change the Tx frame descriptor for next use */
+ eth->m_curTX_FD = eth->m_curTX_FD->m_nextFD;
+
+ return 0;
+}
+
+/* Check for received packets */
+s32 eth_rx (void)
+{
+ s32 nLen = 0;
+ ETH *eth = &m_eth;
+
+ /* check if packet ready */
+ if ( (GET_REG( REG_BDMASTAT)) & ETH_S_BRxRDF) {
+ /* process all waiting packets */
+ while ( !eth->m_curRX_FD->m_frameDataPtr.bf.owner) {
+ nLen = eth->m_curRX_FD->m_status.bf.len;
+ /* call back u-boot -- may call eth_send() */
+ NetReceive ((u8 *)eth->m_curRX_FD->m_frameDataPtr.ui, nLen);
+ /* set owner back to CPU */
+ eth->m_curRX_FD->m_frameDataPtr.bf.owner = 1;
+ /* clear status */
+ eth->m_curRX_FD->m_status.ui = 0x0;
+ /* advance to next descriptor */
+ eth->m_curRX_FD = eth->m_curRX_FD->m_nextFD;
+ /* clear received frame bit */
+ PUT_REG( REG_BDMASTAT, ETH_S_BRxRDF);
+ }
+ }
+
+ return nLen;
+}
+
+/* Halt ethernet engine */
+void eth_halt(void)
+{
+ /* disable MAC */
+ PUT_REG( REG_MACCON, ETH_HaltReg);
+}
+
+#endif
diff --git a/drivers/net/s3c4510b_eth.h b/drivers/net/s3c4510b_eth.h
new file mode 100644
index 0000000..cbddba7
--- /dev/null
+++ b/drivers/net/s3c4510b_eth.h
@@ -0,0 +1,302 @@
+#ifndef __S3C4510B_ETH_H
+#define __S3C4510B_ETH_H
+/*
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * MODULE: $Id:$
+ * Description: Ethernet interface
+ * Runtime Env: ARM7TDMI
+ * Change History:
+ * 03-02-04 Create (Curt Brune) curt@cucy.com
+ *
+ */
+
+#define __packed __attribute__ ((packed))
+
+#define ETH_MAC_ADDR_SIZE (6) /* dst,src addr is 6bytes each */
+#define ETH_MaxTxFrames (16) /* Max number of Tx Frames */
+
+/* Buffered DMA Receiver Control Register */
+#define ETH_BRxBRST 0x0000F /* BDMA Rx Burst Size * BRxBRST */
+ /* = Burst Data Size 16 */
+#define ETH_BRxSTSKO 0x00020 /* BDMA Rx Stop/Skip Frame or Interrupt(=1) */
+ /* case of not OWNER the current Frame */
+#define ETH_BRxMAINC 0x00040 /* BDMA Rx Memory Address Inc/Dec */
+#define ETH_BRxDIE 0x00080 /* BDMA Rx Every Received Frame Interrupt Enable */
+#define ETH_BRxNLIE 0x00100 /* BDMA Rx NULL List Interrupt Enable */
+#define ETH_BRxNOIE 0x00200 /* BDMA Rx Not Owner Interrupt Enable */
+#define ETH_BRxMSOIE 0x00400 /* BDMA Rx Maximum Size over Interrupr Enable */
+#define ETH_BRxLittle 0x00800 /* BDMA Rx Big/Little Endian */
+#define ETH_BRxBig 0x00000 /* BDMA Rx Big/Little Endian */
+#define ETH_BRxWA01 0x01000 /* BDMA Rx Word Alignment- one invalid byte */
+#define ETH_BRxWA10 0x02000 /* BDMA Rx Word Alignment- two invalid byte */
+#define ETH_BRxWA11 0x03000 /* BDMA Rx Word Alignment- three invalid byte */
+#define ETH_BRxEn 0x04000 /* BDMA Rx Enable */
+#define ETH_BRxRS 0x08000 /* BDMA Rx Reset */
+#define ETH_RxEmpty 0x10000 /* BDMA Rx Buffer empty interrupt */
+#define ETH_BRxEarly 0x20000 /* BDMA Rx Early notify Interrupt */
+
+/* Buffered DMA Trasmit Control Register(BDMATXCON) */
+#define ETH_BTxBRST 0x0000F /* BDMA Tx Burst Size = 16 */
+#define ETH_BTxSTSKO 0x00020 /* BDMA Tx Stop/Skip Frame or Interrupt in case */
+ /* of not Owner the current frame */
+#define ETH_BTxCPIE 0x00080 /* BDMA Tx Complete to send control */
+ /* packet Enable */
+#define ETH_BTxNOIE 0x00200 /* BDMA Tx Buffer Not Owner */
+#define ETH_BTxEmpty 0x00400 /* BDMA Tx Buffer Empty Interrupt */
+
+/* BDMA Tx buffer can be moved to the MAC Tx IO when the new frame comes in. */
+#define ETH_BTxMSL000 0x00000 /* No wait to fill the BDMA */
+#define ETH_BTxMSL001 0x00800 /* wait to fill 1/8 of the BDMA */
+#define ETH_BTxMSL010 0x01000 /* wait to fill 2/8 of the BDMA */
+#define ETH_BTxMSL011 0x01800 /* wait to fill 3/8 of the BDMA */
+#define ETH_BTxMSL100 0x02000 /* wait to fill 4/8 of the BDMA */
+#define ETH_BTxMSL101 0x02800 /* wait to fill 5/8 of the BDMA */
+#define ETH_BTxMSL110 0x03000 /* wait to fill 6/8 of the BDMA */
+#define ETH_BTxMSL111 0x03800 /* wait to fill 7/8 of the BDMA */
+#define ETH_BTxEn 0x04000 /* BDMA Tx Enable */
+#define ETH_BTxRS 0x08000 /* BDMA Tx Reset */
+
+/* BDMA Status Register */
+#define ETH_S_BRxRDF 0x00001 /* BDMA Rx Done Every Received Frame */
+#define ETH_S_BRxNL 0x00002 /* BDMA Rx NULL List */
+#define ETH_S_BRxNO 0x00004 /* BDMA Rx Not Owner */
+#define ETH_S_BRxMSO 0x00008 /* BDMA Rx Maximum Size Over */
+#define ETH_S_BRxEmpty 0x00010 /* BDMA Rx Buffer Empty */
+#define ETH_S_BRxSEarly 0x00020 /* Early Notify */
+#define ETH_S_BRxFRF 0x00080 /* One more frame data in BDMA receive buffer */
+#define ETH_S_BTxCCP 0x10000 /* BDMA Tx Complete to send Control Packet */
+#define ETH_S_BTxNL 0x20000 /* BDMA Tx Null List */
+#define ETH_S_BTxNO 0x40000 /* BDMA Tx Not Owner */
+#define ETH_S_BTxEmpty 0x100000 /* BDMA Tx Buffer Empty */
+
+/* MAC Control Register */
+#define ETH_HaltReg 0x0001 /* stop transmission and reception */
+ /* after completion of any current packets */
+#define ETH_HaltImm 0x0002 /* Stop transmission and reception immediately */
+#define ETH_SwReset 0x0004 /* reset all Ethernet controller state machines */
+ /* and FIFOs */
+#define ETH_FullDup 0x0008 /* allow transmission to begin while reception */
+ /* is occurring */
+#define ETH_MACLoop 0x0010 /* MAC loopback */
+#define ETH_ConnM00 0x0000 /* Automatic-default */
+#define ETH_ConnM01 0x0020 /* Force 10Mbits endec */
+#define ETH_ConnM10 0x0040 /* Force MII (rate determined by MII clock */
+#define ETH_MIIOFF 0x0040 /* Force MII (rate determined by MII clock */
+#define ETH_Loop10 0x0080 /* Loop 10Mbps */
+#define ETH_MissRoll 0x0400 /* Missed error counter rolled over */
+#define ETH_MDCOFF 0x1000 /* MII Station Management Clock Off */
+#define ETH_EnMissRoll 0x2000 /* Interrupt when missed error counter rolls */
+ /* over */
+#define ETH_Link10 0x8000 /* Link status 10Mbps */
+
+/* CAM control register(CAMCON) */
+#define ETH_StationAcc 0x0001 /* Accept any packet with a unicast station */
+ /* address */
+#define ETH_GroupAcc 0x0002 /* Accept any packet with multicast-group */
+ /* station address */
+#define ETH_BroadAcc 0x0004 /* Accept any packet with a broadcast station */
+ /* address */
+#define ETH_NegCAM 0x0008 /* 0: Accept packets CAM recognizes, */
+ /* reject others */
+ /* 1: reject packets CAM recognizes, */
+ /* accept others */
+#define ETH_CompEn 0x0010 /* Compare Enable mode */
+
+/* Transmit Control Register(MACTXCON) */
+#define ETH_TxEn 0x0001 /* transmit Enable */
+#define ETH_TxHalt 0x0002 /* Transmit Halt Request */
+#define ETH_NoPad 0x0004 /* suppress Padding */
+#define ETH_NoCRC 0x0008 /* Suppress CRC */
+#define ETH_FBack 0x0010 /* Fast Back-off */
+#define ETH_NoDef 0x0020 /* Disable the defer counter */
+#define ETH_SdPause 0x0040 /* Send Pause */
+#define ETH_MII10En 0x0080 /* MII 10Mbps mode enable */
+#define ETH_EnUnder 0x0100 /* Enable Underrun */
+#define ETH_EnDefer 0x0200 /* Enable Deferral */
+#define ETH_EnNCarr 0x0400 /* Enable No Carrier */
+#define ETH_EnExColl 0x0800 /* interrupt if 16 collision occur */
+ /* in the same packet */
+#define ETH_EnLateColl 0x1000 /* interrupt if collision occurs after */
+ /* 512 bit times(64 bytes times) */
+#define ETH_EnTxPar 0x2000 /* interrupt if the MAC transmit FIFO */
+ /* has a parity error */
+#define ETH_EnComp 0x4000 /* interrupt when the MAC transmits or */
+ /* discards one packet */
+
+/* Transmit Status Register(MACTXSTAT) */
+#define ETH_ExColl 0x0010 /* Excessive collision */
+#define ETH_TxDeffered 0x0020 /* set if 16 collisions occur for same packet */
+#define ETH_Paused 0x0040 /* packet waited because of pause during */
+ /* transmission */
+#define ETH_IntTx 0x0080 /* set if transmission of packet causes an */
+ /* interrupt condiftion */
+#define ETH_Under 0x0100 /* MAC transmit FIFO becomes empty during */
+ /* transmission */
+#define ETH_Defer 0x0200 /* MAC defers for MAC deferral */
+#define ETH_NCarr 0x0400 /* No carrier sense detected during the */
+ /* transmission of a packet */
+#define ETH_SQE 0x0800 /* Signal Quality Error */
+#define ETH_LateColl 0x1000 /* a collision occures after 512 bit times */
+#define ETH_TxPar 0x2000 /* MAC transmit FIFO has detected a parity error */
+#define ETH_Comp 0x4000 /* MAC transmit or discards one packet */
+#define ETH_TxHalted 0x8000 /* Transmission was halted by clearing */
+ /* TxEn or Halt immedite */
+
+/* Receive Control Register (MACRXCON) */
+#define ETH_RxEn 0x0001
+#define ETH_RxHalt 0x0002
+#define ETH_LongEn 0x0004
+#define ETH_ShortEn 0x0008
+#define ETH_StripCRC 0x0010
+#define ETH_PassCtl 0x0020
+#define ETH_IgnoreCRC 0x0040
+#define ETH_EnAlign 0x0100
+#define ETH_EnCRCErr 0x0200
+#define ETH_EnOver 0x0400
+#define ETH_EnLongErr 0x0800
+#define ETH_EnRxPar 0x2000
+#define ETH_EnGood 0x4000
+
+/* Receive Status Register(MACRXSTAT) */
+#define ETH_MCtlRecd 0x0020
+#define ETH_MIntRx 0x0040
+#define ETH_MRx10Stat 0x0080
+#define ETH_MAllignErr 0x0100
+#define ETH_MCRCErr 0x0200
+#define ETH_MOverflow 0x0400
+#define ETH_MLongErr 0x0800
+#define ETH_MRxPar 0x2000
+#define ETH_MRxGood 0x4000
+#define ETH_MRxHalted 0x8000
+
+/* type of ethernet packets */
+#define ETH_TYPE_ARP (0x0806)
+#define ETH_TYPE_IP (0x0800)
+
+#define ETH_HDR_SIZE (14)
+
+/* bit field for frame data pointer word */
+typedef struct __BF_FrameDataPtr {
+ u32 dataPtr:31;
+ u32 owner: 1;
+} BF_FrameDataPtr;
+
+typedef union _FrameDataPtr {
+ u32 ui;
+ BF_FrameDataPtr bf;
+} FrameDataPtr;
+
+typedef struct __BF_TX_Options {
+ u32 no_padding: 1;
+ u32 no_crc: 1;
+ u32 macTxIrqEnbl: 1;
+ u32 littleEndian: 1;
+ u32 frameDataDir: 1;
+ u32 widgetAlign: 2;
+ u32 reserved:25;
+} BF_TX_Options;
+
+typedef union _TX_Options {
+ u32 ui;
+ BF_TX_Options bf;
+} TX_Options;
+
+typedef struct __BF_RX_Status {
+ u32 len:16; /* frame length */
+ u32 reserved1: 3;
+ u32 overMax: 1;
+ u32 reserved2: 1;
+ u32 ctrlRcv: 1;
+ u32 intRx: 1;
+ u32 rx10stat: 1;
+ u32 alignErr: 1;
+ u32 crcErr: 1;
+ u32 overFlow: 1;
+ u32 longErr: 1;
+ u32 reserved3: 1;
+ u32 parityErr: 1;
+ u32 good: 1;
+ u32 halted: 1;
+} BF_RX_Status;
+
+typedef union _RX_Status {
+ u32 ui;
+ BF_RX_Status bf;
+} RX_Status;
+
+typedef struct __BF_TX_Status {
+ u32 len:16; /* frame length */
+ u32 txCollCnt: 4;
+ u32 exColl: 1;
+ u32 txDefer: 1;
+ u32 paused: 1;
+ u32 intTx: 1;
+ u32 underRun: 1;
+ u32 defer: 1;
+ u32 noCarrier: 1;
+ u32 SQErr: 1;
+ u32 lateColl: 1;
+ u32 parityErr: 1;
+ u32 complete: 1;
+ u32 halted: 1;
+} BF_TX_Status;
+
+typedef union _TX_Status {
+ u32 ui;
+ BF_TX_Status bf;
+} TX_Status;
+
+/* TX descriptor structure */
+typedef struct __TX_FrameDescriptor {
+ volatile FrameDataPtr m_frameDataPtr;
+ TX_Options m_opt;
+ volatile TX_Status m_status;
+ struct __TX_FrameDescriptor *m_nextFD;
+} TX_FrameDescriptor;
+
+/* RX descriptor structure */
+typedef struct __RX_FrameDescriptor {
+ volatile FrameDataPtr m_frameDataPtr;
+ u32 m_reserved;
+ volatile RX_Status m_status;
+ struct __RX_FrameDescriptor *m_nextFD;
+} RX_FrameDescriptor;
+
+/* MAC Frame Structure */
+typedef struct __MACFrame {
+ u8 m_dstAddr[6] __packed;
+ u8 m_srcAddr[6] __packed;
+ u16 m_lengthOrType __packed;
+ u8 m_payload[1506] __packed;
+} MACFrame;
+
+/* Ethernet Control block */
+typedef struct __ETH {
+ TX_FrameDescriptor *m_curTX_FD; /* pointer to current TX frame descriptor */
+ TX_FrameDescriptor *m_baseTX_FD; /* pointer to base TX frame descriptor */
+ RX_FrameDescriptor *m_curRX_FD; /* pointer to current RX frame descriptor */
+ RX_FrameDescriptor *m_baseRX_FD; /* pointer to base RX frame descriptor */
+ u8 *m_mac; /* pointer to our MAC address */
+} ETH;
+
+#endif
diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile
new file mode 100644
index 0000000..a7d4a3b
--- /dev/null
+++ b/drivers/net/sk98lin/Makefile
@@ -0,0 +1,120 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# File: drivers/sk98lin/Makefile
+#
+# Makefile for the SysKonnect SK-98xx device driver.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libsk98lin.a
+
+COBJS-y += skge.o
+COBJS-y += skaddr.o
+COBJS-y += skgehwt.o
+COBJS-y += skgeinit.o
+COBJS-y += skgepnmi.o
+COBJS-y += skgesirq.o
+COBJS-y += ski2c.o
+COBJS-y += sklm80.o
+COBJS-y += skqueue.o
+COBJS-y += skrlmt.o
+COBJS-y += sktimer.o
+COBJS-y += skvpd.o
+COBJS-y += skxmac2.o
+COBJS-y += skcsum.o
+#COBJS-y += skproc.o
+
+COBJS-y += uboot_skb.o
+COBJS-y += uboot_drv.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+# DBGDEF = \
+# -DDEBUG
+
+ifdef DEBUG
+DBGDEF += \
+-DSK_DEBUG_CHKMOD=0x00000000L \
+-DSK_DEBUG_CHKCAT=0x00000000L
+endif
+
+
+# **** possible debug modules for SK_DEBUG_CHKMOD *****************
+# SK_DBGMOD_MERR 0x00000001L /* general module error indication */
+# SK_DBGMOD_HWM 0x00000002L /* Hardware init module */
+# SK_DBGMOD_RLMT 0x00000004L /* RLMT module */
+# SK_DBGMOD_VPD 0x00000008L /* VPD module */
+# SK_DBGMOD_I2C 0x00000010L /* I2C module */
+# SK_DBGMOD_PNMI 0x00000020L /* PNMI module */
+# SK_DBGMOD_CSUM 0x00000040L /* CSUM module */
+# SK_DBGMOD_ADDR 0x00000080L /* ADDR module */
+# SK_DBGMOD_DRV 0x00010000L /* DRV module */
+
+# **** possible debug categories for SK_DEBUG_CHKCAT **************
+# *** common modules ***
+# SK_DBGCAT_INIT 0x00000001L module/driver initialization
+# SK_DBGCAT_CTRL 0x00000002L controlling: add/rmv MCA/MAC and other controls (IOCTL)
+# SK_DBGCAT_ERR 0x00000004L error handling paths
+# SK_DBGCAT_TX 0x00000008L transmit path
+# SK_DBGCAT_RX 0x00000010L receive path
+# SK_DBGCAT_IRQ 0x00000020L general IRQ handling
+# SK_DBGCAT_QUEUE 0x00000040L any queue management
+# SK_DBGCAT_DUMP 0x00000080L large data output e.g. hex dump
+# SK_DBGCAT_FATAL 0x00000100L large data output e.g. hex dump
+
+# *** driver (file skge.c) ***
+# SK_DBGCAT_DRV_ENTRY 0x00010000 entry points
+# SK_DBGCAT_DRV_??? 0x00020000 not used
+# SK_DBGCAT_DRV_MCA 0x00040000 multicast
+# SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 tx path
+# SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 rx path
+# SK_DBGCAT_DRV_PROGRESS 0x00200000 general runtime
+# SK_DBGCAT_DRV_??? 0x00400000 not used
+# SK_DBGCAT_DRV_PROM 0x00800000 promiscuous mode
+# SK_DBGCAT_DRV_TX_FRAME 0x01000000 display tx frames
+# SK_DBGCAT_DRV_ERROR 0x02000000 error conditions
+# SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources
+# SK_DBGCAT_DRV_EVENT 0x08000000 driver events
+
+EXTRA_CFLAGS += -I. -DSK_USE_CSUM $(DBGDEF)
+
+CFLAGS += $(EXTRA_CFLAGS)
+HOST_CFLAGS += $(EXTRA_CFLAGS)
+
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/net/sk98lin/h/lm80.h b/drivers/net/sk98lin/h/lm80.h
new file mode 100644
index 0000000..981a4ca
--- /dev/null
+++ b/drivers/net/sk98lin/h/lm80.h
@@ -0,0 +1,197 @@
+/******************************************************************************
+ *
+ * Name: lm80.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.4 $
+ * Date: $Date: 2002/04/25 11:04:10 $
+ * Purpose: Contains all defines for the LM80 Chip
+ * (National Semiconductor).
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ * $Log: lm80.h,v $
+ * Revision 1.4 2002/04/25 11:04:10 rschmidt
+ * Editorial changes
+ *
+ * Revision 1.3 1999/11/22 13:41:19 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.2 1999/03/12 13:26:51 malthoff
+ * remove __STDC__.
+ *
+ * Revision 1.1 1998/06/19 09:28:31 malthoff
+ * created.
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_LM80_H
+#define __INC_LM80_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* defines ********************************************************************/
+
+/*
+ * LM80 register definition
+ *
+ * All registers are 8 bit wide
+ */
+#define LM80_CFG 0x00 /* Configuration Register */
+#define LM80_ISRC_1 0x01 /* Interrupt Status Register 1 */
+#define LM80_ISRC_2 0x02 /* Interrupt Status Register 2 */
+#define LM80_IMSK_1 0x03 /* Interrupt Mask Register 1 */
+#define LM80_IMSK_2 0x04 /* Interrupt Mask Register 2 */
+#define LM80_FAN_CTRL 0x05 /* Fan Devisor/RST#/OS# Register */
+#define LM80_TEMP_CTRL 0x06 /* OS# Config, Temp Res. Reg */
+ /* 0x07 - 0x1f reserved */
+ /* current values */
+#define LM80_VT0_IN 0x20 /* current Voltage 0 value */
+#define LM80_VT1_IN 0x21 /* current Voltage 1 value */
+#define LM80_VT2_IN 0x22 /* current Voltage 2 value */
+#define LM80_VT3_IN 0x23 /* current Voltage 3 value */
+#define LM80_VT4_IN 0x24 /* current Voltage 4 value */
+#define LM80_VT5_IN 0x25 /* current Voltage 5 value */
+#define LM80_VT6_IN 0x26 /* current Voltage 6 value */
+#define LM80_TEMP_IN 0x27 /* current Temperature value */
+#define LM80_FAN1_IN 0x28 /* current Fan 1 count */
+#define LM80_FAN2_IN 0x29 /* current Fan 2 count */
+ /* limit values */
+#define LM80_VT0_HIGH_LIM 0x2a /* high limit val for Voltage 0 */
+#define LM80_VT0_LOW_LIM 0x2b /* low limit val for Voltage 0 */
+#define LM80_VT1_HIGH_LIM 0x2c /* high limit val for Voltage 1 */
+#define LM80_VT1_LOW_LIM 0x2d /* low limit val for Voltage 1 */
+#define LM80_VT2_HIGH_LIM 0x2e /* high limit val for Voltage 2 */
+#define LM80_VT2_LOW_LIM 0x2f /* low limit val for Voltage 2 */
+#define LM80_VT3_HIGH_LIM 0x30 /* high limit val for Voltage 3 */
+#define LM80_VT3_LOW_LIM 0x31 /* low limit val for Voltage 3 */
+#define LM80_VT4_HIGH_LIM 0x32 /* high limit val for Voltage 4 */
+#define LM80_VT4_LOW_LIM 0x33 /* low limit val for Voltage 4 */
+#define LM80_VT5_HIGH_LIM 0x34 /* high limit val for Voltage 5 */
+#define LM80_VT5_LOW_LIM 0x35 /* low limit val for Voltage 5 */
+#define LM80_VT6_HIGH_LIM 0x36 /* high limit val for Voltage 6 */
+#define LM80_VT6_LOW_LIM 0x37 /* low limit val for Voltage 6 */
+#define LM80_THOT_LIM_UP 0x38 /* hot temperature limit (high) */
+#define LM80_THOT_LIM_LO 0x39 /* hot temperature limit (low) */
+#define LM80_TOS_LIM_UP 0x3a /* OS temperature limit (high) */
+#define LM80_TOS_LIM_LO 0x3b /* OS temperature limit (low) */
+#define LM80_FAN1_COUNT_LIM 0x3c /* Fan 1 count limit (high) */
+#define LM80_FAN2_COUNT_LIM 0x3d /* Fan 2 count limit (low) */
+ /* 0x3e - 0x3f reserved */
+
+/*
+ * LM80 bit definitions
+ */
+
+/* LM80_CFG Configuration Register */
+#define LM80_CFG_START (1<<0) /* start monitoring operation */
+#define LM80_CFG_INT_ENA (1<<1) /* enables the INT# Interrupt output */
+#define LM80_CFG_INT_POL (1<<2) /* INT# pol: 0 act low, 1 act high */
+#define LM80_CFG_INT_CLR (1<<3) /* disables INT#/RST_OUT#/OS# outputs */
+#define LM80_CFG_RESET (1<<4) /* signals a reset */
+#define LM80_CFG_CHASS_CLR (1<<5) /* clears Chassis Intrusion (CI) pin */
+#define LM80_CFG_GPO (1<<6) /* drives the GPO# pin */
+#define LM80_CFG_INIT (1<<7) /* restore power on defaults */
+
+/* LM80_ISRC_1 Interrupt Status Register 1 */
+/* LM80_IMSK_1 Interrupt Mask Register 1 */
+#define LM80_IS_VT0 (1<<0) /* limit exceeded for Voltage 0 */
+#define LM80_IS_VT1 (1<<1) /* limit exceeded for Voltage 1 */
+#define LM80_IS_VT2 (1<<2) /* limit exceeded for Voltage 2 */
+#define LM80_IS_VT3 (1<<3) /* limit exceeded for Voltage 3 */
+#define LM80_IS_VT4 (1<<4) /* limit exceeded for Voltage 4 */
+#define LM80_IS_VT5 (1<<5) /* limit exceeded for Voltage 5 */
+#define LM80_IS_VT6 (1<<6) /* limit exceeded for Voltage 6 */
+#define LM80_IS_INT_IN (1<<7) /* state of INT_IN# */
+
+/* LM80_ISRC_2 Interrupt Status Register 2 */
+/* LM80_IMSK_2 Interrupt Mask Register 2 */
+#define LM80_IS_TEMP (1<<0) /* HOT temperature limit exceeded */
+#define LM80_IS_BTI (1<<1) /* state of BTI# pin */
+#define LM80_IS_FAN1 (1<<2) /* count limit exceeded for Fan 1 */
+#define LM80_IS_FAN2 (1<<3) /* count limit exceeded for Fan 2 */
+#define LM80_IS_CI (1<<4) /* Chassis Intrusion occured */
+#define LM80_IS_OS (1<<5) /* OS temperature limit exceeded */
+ /* bit 6 and 7 are reserved in LM80_ISRC_2 */
+#define LM80_IS_HT_IRQ_MD (1<<6) /* Hot temperature interrupt mode */
+#define LM80_IS_OT_IRQ_MD (1<<7) /* OS temperature interrupt mode */
+
+/* LM80_FAN_CTRL Fan Devisor/RST#/OS# Register */
+#define LM80_FAN1_MD_SEL (1<<0) /* Fan 1 mode select */
+#define LM80_FAN2_MD_SEL (1<<1) /* Fan 2 mode select */
+#define LM80_FAN1_PRM_CTL (3<<2) /* Fan 1 speed control */
+#define LM80_FAN2_PRM_CTL (3<<4) /* Fan 2 speed control */
+#define LM80_FAN_OS_ENA (1<<6) /* enable OS mode on RST_OUT#/OS# pins*/
+#define LM80_FAN_RST_ENA (1<<7) /* sets RST_OUT#/OS# pins in RST mode */
+
+/* LM80_TEMP_CTRL OS# Config, Temp Res. Reg */
+#define LM80_TEMP_OS_STAT (1<<0) /* mirrors the state of RST_OUT#/OS# */
+#define LM80_TEMP_OS_POL (1<<1) /* select OS# polarity */
+#define LM80_TEMP_OS_MODE (1<<2) /* selects Interrupt mode */
+#define LM80_TEMP_RES (1<<3) /* selects 9 or 11 bit temp resulution*/
+#define LM80_TEMP_LSB (0xf<<4)/* 4 LSBs of 11 bit temp data */
+#define LM80_TEMP_LSB_9 (1<<7) /* LSB of 9 bit temperature data */
+
+ /* 0x07 - 0x1f reserved */
+/* LM80_VT0_IN current Voltage 0 value */
+/* LM80_VT1_IN current Voltage 1 value */
+/* LM80_VT2_IN current Voltage 2 value */
+/* LM80_VT3_IN current Voltage 3 value */
+/* LM80_VT4_IN current Voltage 4 value */
+/* LM80_VT5_IN current Voltage 5 value */
+/* LM80_VT6_IN current Voltage 6 value */
+/* LM80_TEMP_IN current temperature value */
+/* LM80_FAN1_IN current Fan 1 count */
+/* LM80_FAN2_IN current Fan 2 count */
+/* LM80_VT0_HIGH_LIM high limit val for Voltage 0 */
+/* LM80_VT0_LOW_LIM low limit val for Voltage 0 */
+/* LM80_VT1_HIGH_LIM high limit val for Voltage 1 */
+/* LM80_VT1_LOW_LIM low limit val for Voltage 1 */
+/* LM80_VT2_HIGH_LIM high limit val for Voltage 2 */
+/* LM80_VT2_LOW_LIM low limit val for Voltage 2 */
+/* LM80_VT3_HIGH_LIM high limit val for Voltage 3 */
+/* LM80_VT3_LOW_LIM low limit val for Voltage 3 */
+/* LM80_VT4_HIGH_LIM high limit val for Voltage 4 */
+/* LM80_VT4_LOW_LIM low limit val for Voltage 4 */
+/* LM80_VT5_HIGH_LIM high limit val for Voltage 5 */
+/* LM80_VT5_LOW_LIM low limit val for Voltage 5 */
+/* LM80_VT6_HIGH_LIM high limit val for Voltage 6 */
+/* LM80_VT6_LOW_LIM low limit val for Voltage 6 */
+/* LM80_THOT_LIM_UP hot temperature limit (high) */
+/* LM80_THOT_LIM_LO hot temperature limit (low) */
+/* LM80_TOS_LIM_UP OS temperature limit (high) */
+/* LM80_TOS_LIM_LO OS temperature limit (low) */
+/* LM80_FAN1_COUNT_LIM Fan 1 count limit (high) */
+/* LM80_FAN2_COUNT_LIM Fan 2 count limit (low) */
+ /* 0x3e - 0x3f reserved */
+
+#define LM80_ADDR 0x28 /* LM80 default addr */
+
+/* typedefs *******************************************************************/
+
+
+/* function prototypes ********************************************************/
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INC_LM80_H */
diff --git a/drivers/net/sk98lin/h/skaddr.h b/drivers/net/sk98lin/h/skaddr.h
new file mode 100644
index 0000000..711f873
--- /dev/null
+++ b/drivers/net/sk98lin/h/skaddr.h
@@ -0,0 +1,425 @@
+/******************************************************************************
+ *
+ * Name: skaddr.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.26 $
+ * Date: $Date: 2002/11/15 07:24:42 $
+ * Purpose: Header file for Address Management (MC, UC, Prom).
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skaddr.h,v $
+ * Revision 1.26 2002/11/15 07:24:42 tschilli
+ * SK_ADDR_EQUAL macro fixed.
+ *
+ * Revision 1.25 2002/06/10 13:55:18 tschilli
+ * Changes for handling YUKON.
+ * All changes are internally and not visible to the programmer
+ * using this module.
+ *
+ * Revision 1.24 2001/01/22 13:41:34 rassmann
+ * Supporting two nets on dual-port adapters.
+ *
+ * Revision 1.23 2000/08/10 11:27:50 rassmann
+ * Editorial changes.
+ * Preserving 32-bit alignment in structs for the adapter context.
+ *
+ * Revision 1.22 2000/08/07 11:10:40 rassmann
+ * Editorial changes.
+ *
+ * Revision 1.21 2000/05/04 09:39:59 rassmann
+ * Editorial changes.
+ * Corrected multicast address hashing.
+ *
+ * Revision 1.20 1999/11/22 13:46:14 cgoos
+ * Changed license header to GPL.
+ * Allowing overwrite for SK_ADDR_EQUAL.
+ *
+ * Revision 1.19 1999/05/28 10:56:07 rassmann
+ * Editorial changes.
+ *
+ * Revision 1.18 1999/04/06 17:22:04 rassmann
+ * Added private "ActivePort".
+ *
+ * Revision 1.17 1999/01/14 16:18:19 rassmann
+ * Corrected multicast initialization.
+ *
+ * Revision 1.16 1999/01/04 10:30:36 rassmann
+ * SkAddrOverride only possible after SK_INIT_IO phase.
+ *
+ * Revision 1.15 1998/12/29 13:13:11 rassmann
+ * An address override is now preserved in the SK_INIT_IO phase.
+ * All functions return an int now.
+ * Extended parameter checking.
+ *
+ * Revision 1.14 1998/11/24 12:39:45 rassmann
+ * Reserved multicast entry for BPDU address.
+ * 13 multicast entries left for protocol.
+ *
+ * Revision 1.13 1998/11/13 17:24:32 rassmann
+ * Changed return value of SkAddrOverride to int.
+ *
+ * Revision 1.12 1998/11/13 16:56:19 rassmann
+ * Added macro SK_ADDR_COMPARE.
+ * Changed return type of SkAddrOverride to SK_BOOL.
+ *
+ * Revision 1.11 1998/10/28 18:16:35 rassmann
+ * Avoiding I/Os before SK_INIT_RUN level.
+ * Aligning InexactFilter.
+ *
+ * Revision 1.10 1998/10/22 11:39:10 rassmann
+ * Corrected signed/unsigned mismatches.
+ *
+ * Revision 1.9 1998/10/15 15:15:49 rassmann
+ * Changed Flags Parameters from SK_U8 to int.
+ * Checked with lint.
+ *
+ * Revision 1.8 1998/09/24 19:15:12 rassmann
+ * Code cleanup.
+ *
+ * Revision 1.7 1998/09/18 20:22:13 rassmann
+ * Added HW access.
+ *
+ * Revision 1.6 1998/09/04 19:40:20 rassmann
+ * Interface enhancements.
+ *
+ * Revision 1.5 1998/09/04 12:40:57 rassmann
+ * Interface cleanup.
+ *
+ * Revision 1.4 1998/09/04 12:14:13 rassmann
+ * Interface cleanup.
+ *
+ * Revision 1.3 1998/09/02 16:56:40 rassmann
+ * Updated interface.
+ *
+ * Revision 1.2 1998/08/27 14:26:09 rassmann
+ * Updated interface.
+ *
+ * Revision 1.1 1998/08/21 08:31:08 rassmann
+ * First public version.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This module is intended to manage multicast addresses and promiscuous mode
+ * on GEnesis adapters.
+ *
+ * Include File Hierarchy:
+ *
+ * "skdrv1st.h"
+ * ...
+ * "sktypes.h"
+ * "skqueue.h"
+ * "skaddr.h"
+ * ...
+ * "skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKADDR_H
+#define __INC_SKADDR_H
+
+#ifdef __cplusplus
+#error C++ is not yet supported.
+extern "C" {
+#endif /* cplusplus */
+
+/* defines ********************************************************************/
+
+#define SK_MAC_ADDR_LEN 6 /* Length of MAC address. */
+#define SK_MAX_ADDRS 14 /* #Addrs for exact match. */
+
+/* ----- Common return values ----- */
+
+#define SK_ADDR_SUCCESS 0 /* Function returned successfully. */
+#define SK_ADDR_ILLEGAL_PORT 100 /* Port number too high. */
+#define SK_ADDR_TOO_EARLY 101 /* Function called too early. */
+
+/* ----- Clear/Add flag bits ----- */
+
+#define SK_ADDR_PERMANENT 1 /* RLMT Address */
+
+/* ----- Additional Clear flag bits ----- */
+
+#define SK_MC_SW_ONLY 2 /* Do not update HW when clearing. */
+
+/* ----- Override flag bits ----- */
+
+#define SK_ADDR_LOGICAL_ADDRESS 0
+#define SK_ADDR_VIRTUAL_ADDRESS (SK_ADDR_LOGICAL_ADDRESS) /* old */
+#define SK_ADDR_PHYSICAL_ADDRESS 1
+#define SK_ADDR_CLEAR_LOGICAL 2
+#define SK_ADDR_SET_LOGICAL 4
+
+/* ----- Override return values ----- */
+
+#define SK_ADDR_OVERRIDE_SUCCESS (SK_ADDR_SUCCESS)
+#define SK_ADDR_DUPLICATE_ADDRESS 1
+#define SK_ADDR_MULTICAST_ADDRESS 2
+
+/* ----- Partitioning of excact match table ----- */
+
+#define SK_ADDR_EXACT_MATCHES 16 /* #Exact match entries. */
+
+#define SK_ADDR_FIRST_MATCH_RLMT 1
+#define SK_ADDR_LAST_MATCH_RLMT 2
+#define SK_ADDR_FIRST_MATCH_DRV 3
+#define SK_ADDR_LAST_MATCH_DRV (SK_ADDR_EXACT_MATCHES - 1)
+
+/* ----- SkAddrMcAdd/SkAddrMcUpdate return values ----- */
+
+#define SK_MC_FILTERING_EXACT 0 /* Exact filtering. */
+#define SK_MC_FILTERING_INEXACT 1 /* Inexact filtering. */
+
+/* ----- Additional SkAddrMcAdd return values ----- */
+
+#define SK_MC_ILLEGAL_ADDRESS 2 /* Illegal address. */
+#define SK_MC_ILLEGAL_PORT 3 /* Illegal port (not the active one). */
+#define SK_MC_RLMT_OVERFLOW 4 /* Too many RLMT mc addresses. */
+
+/* Promiscuous mode bits ----- */
+
+#define SK_PROM_MODE_NONE 0 /* Normal receive. */
+#define SK_PROM_MODE_LLC 1 /* Receive all LLC frames. */
+#define SK_PROM_MODE_ALL_MC 2 /* Receive all multicast frames. */
+/* #define SK_PROM_MODE_NON_LLC 4 */ /* Receive all non-LLC frames. */
+
+/* Macros */
+
+#if 0
+#ifndef SK_ADDR_EQUAL
+/*
+ * "&" instead of "&&" allows better optimization on IA-64.
+ * The replacement is safe here, as all bytes exist.
+ */
+#ifndef SK_ADDR_DWORD_COMPARE
+#define SK_ADDR_EQUAL(A1,A2) ( \
+ (((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \
+ (((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \
+ (((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \
+ (((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \
+ (((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \
+ (((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0]))
+#else /* SK_ADDR_DWORD_COMPARE */
+#define SK_ADDR_EQUAL(A1,A2) ( \
+ (*(SK_U32 *)&(((SK_U8 *)(A1))[2]) == *(SK_U32 *)&(((SK_U8 *)(A2))[2])) & \
+ (*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0])))
+#endif /* SK_ADDR_DWORD_COMPARE */
+#endif /* SK_ADDR_EQUAL */
+#endif /* 0 */
+
+#ifndef SK_ADDR_EQUAL
+#ifndef SK_ADDR_DWORD_COMPARE
+#define SK_ADDR_EQUAL(A1,A2) ( \
+ (((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \
+ (((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \
+ (((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \
+ (((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \
+ (((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \
+ (((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0]))
+#else /* SK_ADDR_DWORD_COMPARE */
+#define SK_ADDR_EQUAL(A1,A2) ( \
+ (*(SK_U16 *)&(((SK_U8 *)(A1))[4]) == *(SK_U16 *)&(((SK_U8 *)(A2))[4])) && \
+ (*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0])))
+#endif /* SK_ADDR_DWORD_COMPARE */
+#endif /* SK_ADDR_EQUAL */
+
+/* typedefs *******************************************************************/
+
+typedef struct s_MacAddr {
+ SK_U8 a[SK_MAC_ADDR_LEN];
+} SK_MAC_ADDR;
+
+
+/* SK_FILTER is used to ensure alignment of the filter. */
+typedef union s_InexactFilter {
+ SK_U8 Bytes[8];
+ SK_U64 Val; /* Dummy entry for alignment only. */
+} SK_FILTER64;
+
+
+typedef struct s_AddrNet SK_ADDR_NET;
+
+
+typedef struct s_AddrPort {
+
+/* ----- Public part (read-only) ----- */
+
+ SK_MAC_ADDR CurrentMacAddress; /* Current physical MAC Address. */
+ SK_MAC_ADDR PermanentMacAddress; /* Permanent physical MAC Address. */
+ int PromMode; /* Promiscuous Mode. */
+
+/* ----- Private part ----- */
+
+ SK_MAC_ADDR PreviousMacAddress; /* Prev. phys. MAC Address. */
+ SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */
+ SK_U8 Align01;
+
+ SK_U32 FirstExactMatchRlmt;
+ SK_U32 NextExactMatchRlmt;
+ SK_U32 FirstExactMatchDrv;
+ SK_U32 NextExactMatchDrv;
+ SK_MAC_ADDR Exact[SK_ADDR_EXACT_MATCHES];
+ SK_FILTER64 InexactFilter; /* For 64-bit hash register. */
+ SK_FILTER64 InexactRlmtFilter; /* For 64-bit hash register. */
+ SK_FILTER64 InexactDrvFilter; /* For 64-bit hash register. */
+} SK_ADDR_PORT;
+
+
+struct s_AddrNet {
+/* ----- Public part (read-only) ----- */
+
+ SK_MAC_ADDR CurrentMacAddress; /* Logical MAC Address. */
+ SK_MAC_ADDR PermanentMacAddress; /* Logical MAC Address. */
+
+/* ----- Private part ----- */
+
+ SK_U32 ActivePort; /* View of module ADDR. */
+ SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */
+ SK_U8 Align01;
+ SK_U16 Align02;
+};
+
+
+typedef struct s_Addr {
+
+/* ----- Public part (read-only) ----- */
+
+ SK_ADDR_NET Net[SK_MAX_NETS];
+ SK_ADDR_PORT Port[SK_MAX_MACS];
+
+/* ----- Private part ----- */
+} SK_ADDR;
+
+/* function prototypes ********************************************************/
+
+#ifndef SK_KR_PROTO
+
+/* Functions provided by SkAddr */
+
+/* ANSI/C++ compliant function prototypes */
+
+extern int SkAddrInit(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Level);
+
+extern int SkAddrMcClear(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber,
+ int Flags);
+
+extern int SkAddrXmacMcClear(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber,
+ int Flags);
+
+extern int SkAddrGmacMcClear(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber,
+ int Flags);
+
+extern int SkAddrMcAdd(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber,
+ SK_MAC_ADDR *pMc,
+ int Flags);
+
+extern int SkAddrXmacMcAdd(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber,
+ SK_MAC_ADDR *pMc,
+ int Flags);
+
+extern int SkAddrGmacMcAdd(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber,
+ SK_MAC_ADDR *pMc,
+ int Flags);
+
+extern int SkAddrMcUpdate(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber);
+
+extern int SkAddrXmacMcUpdate(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber);
+
+extern int SkAddrGmacMcUpdate(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber);
+
+extern int SkAddrOverride(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber,
+ SK_MAC_ADDR *pNewAddr,
+ int Flags);
+
+extern int SkAddrPromiscuousChange(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber,
+ int NewPromMode);
+
+extern int SkAddrXmacPromiscuousChange(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber,
+ int NewPromMode);
+
+extern int SkAddrGmacPromiscuousChange(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 PortNumber,
+ int NewPromMode);
+
+extern int SkAddrSwap(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 FromPortNumber,
+ SK_U32 ToPortNumber);
+
+#else /* defined(SK_KR_PROTO)) */
+
+/* Non-ANSI/C++ compliant function prototypes */
+
+#error KR-style prototypes are not yet provided.
+
+#endif /* defined(SK_KR_PROTO)) */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INC_SKADDR_H */
diff --git a/drivers/net/sk98lin/h/skcsum.h b/drivers/net/sk98lin/h/skcsum.h
new file mode 100644
index 0000000..2acae32
--- /dev/null
+++ b/drivers/net/sk98lin/h/skcsum.h
@@ -0,0 +1,261 @@
+/******************************************************************************
+ *
+ * Name: skcsum.h
+ * Project: GEnesis - SysKonnect SK-NET Gigabit Ethernet (SK-98xx)
+ * Version: $Revision: 1.9 $
+ * Date: $Date: 2001/02/06 11:21:39 $
+ * Purpose: Store/verify Internet checksum in send/receive packets.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skcsum.h,v $
+ * Revision 1.9 2001/02/06 11:21:39 rassmann
+ * Editorial changes.
+ *
+ * Revision 1.8 2001/02/06 11:15:36 rassmann
+ * Supporting two nets on dual-port adapters.
+ *
+ * Revision 1.7 2000/06/29 13:17:05 rassmann
+ * Corrected reception of a packet with UDP checksum == 0 (which means there
+ * is no UDP checksum).
+ *
+ * Revision 1.6 2000/02/28 12:33:44 cgoos
+ * Changed C++ style comments to C style.
+ *
+ * Revision 1.5 2000/02/21 12:10:05 cgoos
+ * Fixed license comment.
+ *
+ * Revision 1.4 2000/02/21 11:08:37 cgoos
+ * Merged changes back into common source.
+ *
+ * Revision 1.1 1999/07/26 14:47:49 mkarl
+ * changed from common source to windows specific source
+ * added return SKCS_STATUS_IP_CSUM_ERROR_UDP and
+ * SKCS_STATUS_IP_CSUM_ERROR_TCP to pass the NidsTester
+ * changes for Tx csum offload
+ *
+ * Revision 1.2 1998/09/04 12:16:34 mhaveman
+ * Checked in for Stephan to allow compilation.
+ * -Added definition SK_CSUM_EVENT_CLEAR_PROTO_STATS to clear statistic
+ * -Added prototype for SkCsEvent()
+ *
+ * Revision 1.1 1998/09/01 15:36:53 swolf
+ * initial revision
+ *
+ * 01-Sep-1998 sw Created.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * Public header file for the "GEnesis" common module "CSUM".
+ *
+ * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon"
+ * and is the code name of this SysKonnect project.
+ *
+ * Compilation Options:
+ *
+ * SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an
+ * empty module.
+ *
+ * SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id
+ * definitions. In this case, all SKCS_PROTO_xxx definitions must be made
+ * external.
+ *
+ * SKCS_OVERWRITE_STATUS - Define to overwrite the default return status
+ * definitions. In this case, all SKCS_STATUS_xxx definitions must be made
+ * external.
+ *
+ * Include File Hierarchy:
+ *
+ * "h/skcsum.h"
+ * "h/sktypes.h"
+ * "h/skqueue.h"
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKCSUM_H
+#define __INC_SKCSUM_H
+
+#include "h/sktypes.h"
+#include "h/skqueue.h"
+
+/* defines ********************************************************************/
+
+/*
+ * Define the default bit flags for 'SKCS_PACKET_INFO.ProtocolFlags' if no user
+ * overwrite.
+ */
+#ifndef SKCS_OVERWRITE_PROTO /* User overwrite? */
+#define SKCS_PROTO_IP 0x1 /* IP (Internet Protocol version 4) */
+#define SKCS_PROTO_TCP 0x2 /* TCP (Transmission Control Protocol) */
+#define SKCS_PROTO_UDP 0x4 /* UDP (User Datagram Protocol) */
+
+/* Indices for protocol statistics. */
+#define SKCS_PROTO_STATS_IP 0
+#define SKCS_PROTO_STATS_UDP 1
+#define SKCS_PROTO_STATS_TCP 2
+#define SKCS_NUM_PROTOCOLS 3 /* Number of supported protocols. */
+#endif /* !SKCS_OVERWRITE_PROTO */
+
+/*
+ * Define the default SKCS_STATUS type and values if no user overwrite.
+ *
+ * SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame.
+ * SKCS_STATUS_IP_CSUM_ERROR - IP checksum error.
+ * SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame.
+ * SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame
+ * SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok).
+ * SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame).
+ * SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok).
+ * SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok).
+ * SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok.
+ * SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok.
+ * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum.
+ */
+#ifndef SKCS_OVERWRITE_STATUS /* User overwrite? */
+#define SKCS_STATUS int /* Define status type. */
+
+#define SKCS_STATUS_UNKNOWN_IP_VERSION 1
+#define SKCS_STATUS_IP_CSUM_ERROR 2
+#define SKCS_STATUS_IP_FRAGMENT 3
+#define SKCS_STATUS_IP_CSUM_OK 4
+#define SKCS_STATUS_TCP_CSUM_ERROR 5
+#define SKCS_STATUS_UDP_CSUM_ERROR 6
+#define SKCS_STATUS_TCP_CSUM_OK 7
+#define SKCS_STATUS_UDP_CSUM_OK 8
+/* needed for Microsoft */
+#define SKCS_STATUS_IP_CSUM_ERROR_UDP 9
+#define SKCS_STATUS_IP_CSUM_ERROR_TCP 10
+/* UDP checksum may be omitted */
+#define SKCS_STATUS_IP_CSUM_OK_NO_UDP 11
+#endif /* !SKCS_OVERWRITE_STATUS */
+
+/* Clear protocol statistics event. */
+#define SK_CSUM_EVENT_CLEAR_PROTO_STATS 1
+
+/*
+ * Add two values in one's complement.
+ *
+ * Note: One of the two input values may be "longer" than 16-bit, but then the
+ * resulting sum may be 17 bits long. In this case, add zero to the result using
+ * SKCS_OC_ADD() again.
+ *
+ * Result = Value1 + Value2
+ */
+#define SKCS_OC_ADD(Result, Value1, Value2) { \
+ unsigned long Sum; \
+ \
+ Sum = (unsigned long) (Value1) + (unsigned long) (Value2); \
+ /* Add-in any carry. */ \
+ (Result) = (Sum & 0xffff) + (Sum >> 16); \
+}
+
+/*
+ * Subtract two values in one's complement.
+ *
+ * Result = Value1 - Value2
+ */
+#define SKCS_OC_SUB(Result, Value1, Value2) \
+ SKCS_OC_ADD((Result), (Value1), ~(Value2) & 0xffff)
+
+/* typedefs *******************************************************************/
+
+/*
+ * SKCS_PROTO_STATS - The CSUM protocol statistics structure.
+ *
+ * There is one instance of this structure for each protocol supported.
+ */
+typedef struct s_CsProtocolStatistics {
+ SK_U64 RxOkCts; /* Receive checksum ok. */
+ SK_U64 RxUnableCts; /* Unable to verify receive checksum. */
+ SK_U64 RxErrCts; /* Receive checksum error. */
+ SK_U64 TxOkCts; /* Transmit checksum ok. */
+ SK_U64 TxUnableCts; /* Unable to calculate checksum in hw. */
+} SKCS_PROTO_STATS;
+
+/*
+ * s_Csum - The CSUM module context structure.
+ */
+typedef struct s_Csum {
+ /* Enabled receive SK_PROTO_XXX bit flags. */
+ unsigned ReceiveFlags[SK_MAX_NETS];
+#ifdef TX_CSUM
+ unsigned TransmitFlags[SK_MAX_NETS];
+#endif /* TX_CSUM */
+
+ /* The protocol statistics structure; one per supported protocol. */
+ SKCS_PROTO_STATS ProtoStats[SK_MAX_NETS][SKCS_NUM_PROTOCOLS];
+} SK_CSUM;
+
+/*
+ * SKCS_PACKET_INFO - The packet information structure.
+ */
+typedef struct s_CsPacketInfo {
+ /* Bit field specifiying the desired/found protocols. */
+ unsigned ProtocolFlags;
+
+ /* Length of complete IP header, including any option fields. */
+ unsigned IpHeaderLength;
+
+ /* IP header checksum. */
+ unsigned IpHeaderChecksum;
+
+ /* TCP/UDP pseudo header checksum. */
+ unsigned PseudoHeaderChecksum;
+} SKCS_PACKET_INFO;
+
+/* function prototypes ********************************************************/
+
+#ifndef SkCsCalculateChecksum
+extern unsigned SkCsCalculateChecksum(
+ void *pData,
+ unsigned Length);
+#endif
+
+extern int SkCsEvent(
+ SK_AC *pAc,
+ SK_IOC Ioc,
+ SK_U32 Event,
+ SK_EVPARA Param);
+
+extern SKCS_STATUS SkCsGetReceiveInfo(
+ SK_AC *pAc,
+ void *pIpHeader,
+ unsigned Checksum1,
+ unsigned Checksum2,
+ int NetNumber);
+
+extern void SkCsGetSendInfo(
+ SK_AC *pAc,
+ void *pIpHeader,
+ SKCS_PACKET_INFO *pPacketInfo,
+ int NetNumber);
+
+extern void SkCsSetReceiveFlags(
+ SK_AC *pAc,
+ unsigned ReceiveFlags,
+ unsigned *pChecksum1Offset,
+ unsigned *pChecksum2Offset,
+ int NetNumber);
+
+#endif /* __INC_SKCSUM_H */
diff --git a/drivers/net/sk98lin/h/skdebug.h b/drivers/net/sk98lin/h/skdebug.h
new file mode 100644
index 0000000..cf5b5ad
--- /dev/null
+++ b/drivers/net/sk98lin/h/skdebug.h
@@ -0,0 +1,119 @@
+/******************************************************************************
+ *
+ * Name: skdebug.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.12 $
+ * Date: $Date: 2002/07/15 15:37:13 $
+ * Purpose: SK specific DEBUG support
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ * $Log: skdebug.h,v $
+ * Revision 1.12 2002/07/15 15:37:13 rschmidt
+ * Power Management support
+ * Editorial changes
+ *
+ * Revision 1.11 2002/04/25 11:04:39 rschmidt
+ * Editorial changes
+ *
+ * Revision 1.10 1999/11/22 13:47:40 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.9 1999/09/14 14:02:43 rwahl
+ * Added SK_DBGMOD_PECP.
+ *
+ * Revision 1.8 1998/11/25 08:31:54 gklug
+ * fix: no C++ comments allowed in common sources
+ *
+ * Revision 1.7 1998/11/24 16:47:24 swolf
+ * Driver may now define its own SK_DBG_MSG() (eg. in "h/skdrv1st.h").
+ *
+ * Revision 1.6 1998/10/28 10:23:55 rassmann
+ * ADDED SK_DBGMOD_ADDR.
+ *
+ * Revision 1.5 1998/10/22 09:43:55 gklug
+ * add: CSUM module
+ *
+ * Revision 1.4 1998/10/01 07:54:44 gklug
+ * add: PNMI debug module
+ *
+ * Revision 1.3 1998/09/18 08:32:34 afischer
+ * Macros changed according ssr-spec.:
+ * SK_DBG_MODCHK -> SK_DBG_CHKMOD
+ * SK_DBG_CATCHK -> SK_DBG_CHKCAT
+ *
+ * Revision 1.2 1998/07/03 14:38:25 malthoff
+ * Add category SK_DBGCAT_FATAL.
+ *
+ * Revision 1.1 1998/06/19 13:39:01 malthoff
+ * created.
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKDEBUG_H
+#define __INC_SKDEBUG_H
+
+#ifdef DEBUG
+#ifndef SK_DBG_MSG
+#define SK_DBG_MSG(pAC,comp,cat,arg) \
+ if ( ((comp) & SK_DBG_CHKMOD(pAC)) && \
+ ((cat) & SK_DBG_CHKCAT(pAC)) ) { \
+ SK_DBG_PRINTF arg ; \
+ }
+#endif
+#else
+#define SK_DBG_MSG(pAC,comp,lev,arg)
+#endif
+
+/* PLS NOTE:
+ * =========
+ * Due to any restrictions of kernel printf routines do not use other
+ * format identifiers as: %x %d %c %s .
+ * Never use any combined format identifiers such as: %lx %ld in your
+ * printf - argument (arg) because some OS specific kernel printfs may
+ * only support some basic identifiers.
+ */
+
+/* Debug modules */
+
+#define SK_DBGMOD_MERR 0x00000001L /* general module error indication */
+#define SK_DBGMOD_HWM 0x00000002L /* Hardware init module */
+#define SK_DBGMOD_RLMT 0x00000004L /* RLMT module */
+#define SK_DBGMOD_VPD 0x00000008L /* VPD module */
+#define SK_DBGMOD_I2C 0x00000010L /* I2C module */
+#define SK_DBGMOD_PNMI 0x00000020L /* PNMI module */
+#define SK_DBGMOD_CSUM 0x00000040L /* CSUM module */
+#define SK_DBGMOD_ADDR 0x00000080L /* ADDR module */
+#define SK_DBGMOD_PECP 0x00000100L /* PECP module */
+#define SK_DBGMOD_POWM 0x00000200L /* Power Management module */
+
+/* Debug events */
+
+#define SK_DBGCAT_INIT 0x00000001L /* module/driver initialization */
+#define SK_DBGCAT_CTRL 0x00000002L /* controlling devices */
+#define SK_DBGCAT_ERR 0x00000004L /* error handling paths */
+#define SK_DBGCAT_TX 0x00000008L /* transmit path */
+#define SK_DBGCAT_RX 0x00000010L /* receive path */
+#define SK_DBGCAT_IRQ 0x00000020L /* general IRQ handling */
+#define SK_DBGCAT_QUEUE 0x00000040L /* any queue management */
+#define SK_DBGCAT_DUMP 0x00000080L /* large data output e.g. hex dump */
+#define SK_DBGCAT_FATAL 0x00000100L /* fatal error */
+
+#endif /* __INC_SKDEBUG_H */
diff --git a/drivers/net/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h
new file mode 100644
index 0000000..af34d7b
--- /dev/null
+++ b/drivers/net/sk98lin/h/skdrv1st.h
@@ -0,0 +1,264 @@
+/******************************************************************************
+ *
+ * Name: skdrv1st.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.11 $
+ * Date: $Date: 2003/02/25 14:16:40 $
+ * Purpose: First header file for driver and all other modules
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skdrv1st.h,v $
+ * Revision 1.11 2003/02/25 14:16:40 mlindner
+ * Fix: Copyright statement
+ *
+ * Revision 1.10 2002/10/02 12:46:02 mlindner
+ * Add: Support for Yukon
+ *
+ * Revision 1.9.2.2 2001/12/07 12:06:42 mlindner
+ * Fix: malloc -> slab changes
+ *
+ * Revision 1.9.2.1 2001/03/12 16:50:59 mlindner
+ * chg: kernel 2.4 adaption
+ *
+ * Revision 1.9 2001/01/22 14:16:04 mlindner
+ * added ProcFs functionality
+ * Dual Net functionality integrated
+ * Rlmt networks added
+ *
+ * Revision 1.8 2000/02/21 12:19:18 cgoos
+ * Added default for SK_DEBUG_CHKMOD/_CHKCAT
+ *
+ * Revision 1.7 1999/11/22 13:50:00 cgoos
+ * Changed license header to GPL.
+ * Added overwrite for several functions.
+ * Removed linux 2.0.x definitions.
+ * Removed PCI vendor ID definition (now in kernel).
+ *
+ * Revision 1.6 1999/07/27 08:03:33 cgoos
+ * Changed SK_IN/OUT macros to readX/writeX instead of memory
+ * accesses (necessary for ALPHA).
+ *
+ * Revision 1.5 1999/07/23 12:10:21 cgoos
+ * Removed SK_RLMT_SLOW_LOOKAHEAD define.
+ *
+ * Revision 1.4 1999/07/14 12:31:13 cgoos
+ * Added SK_RLMT_SLOW_LOOKAHEAD define.
+ *
+ * Revision 1.3 1999/04/07 10:12:54 cgoos
+ * Added check for KERNEL and OPTIMIZATION defines.
+ *
+ * Revision 1.2 1999/03/01 08:51:47 cgoos
+ * Fixed pcibios_read/write definitions.
+ *
+ * Revision 1.1 1999/02/16 07:40:49 cgoos
+ * First version.
+ *
+ *
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the first include file of the driver, which includes all
+ * neccessary system header files and some of the GEnesis header files.
+ * It also defines some basic items.
+ *
+ * Include File Hierarchy:
+ *
+ * see skge.c
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKDRV1ST_H
+#define __INC_SKDRV1ST_H
+
+#if 0
+/* Check kernel version */
+#include <linux/version.h>
+#if (LINUX_VERSION_CODE > 0x020300)
+#endif
+#endif
+
+typedef struct s_AC SK_AC;
+
+/* override some default functions with optimized linux functions */
+
+#define SK_PNMI_STORE_U16(p,v) memcpy((char*)(p),(char*)&(v),2)
+#define SK_PNMI_STORE_U32(p,v) memcpy((char*)(p),(char*)&(v),4)
+#define SK_PNMI_STORE_U64(p,v) memcpy((char*)(p),(char*)&(v),8)
+#define SK_PNMI_READ_U16(p,v) memcpy((char*)&(v),(char*)(p),2)
+#define SK_PNMI_READ_U32(p,v) memcpy((char*)&(v),(char*)(p),2)
+#define SK_PNMI_READ_U64(p,v) memcpy((char*)&(v),(char*)(p),2)
+
+#define SkCsCalculateChecksum(p,l) ((~ip_compute_csum(p, l)) & 0xffff)
+
+#define SK_ADDR_EQUAL(a1,a2) (!memcmp(a1,a2,6))
+
+
+#if !defined(__OPTIMIZE__) || !defined(__KERNEL__)
+#warning You must compile this file with the correct options!
+#warning See the last lines of the source file.
+#error You must compile this driver with "-O".
+#endif
+
+#if 0
+#include <linux/version.h>
+#endif
+#include <linux/types.h>
+#if 0
+#include <linux/kernel.h>
+#endif
+#include <linux/string.h>
+#if 0
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#endif
+#include <asm/byteorder.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+#if 0
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <net/checksum.h>
+#endif
+
+#include "h/sktypes.h"
+#include "h/skerror.h"
+#include "h/skdebug.h"
+#include "h/lm80.h"
+#include "h/xmac_ii.h"
+
+#include "u-boot_compat.h"
+
+#ifdef __LITTLE_ENDIAN
+#define SK_LITTLE_ENDIAN
+#else
+#define SK_BIG_ENDIAN
+#endif
+
+#if 0
+#define SK_NET_DEVICE net_device
+#else
+#define SK_NET_DEVICE eth_device
+#endif
+
+
+/* we use gethrtime(), return unit: nanoseconds */
+#if 0
+#define SK_TICKS_PER_SEC HZ
+#else
+#define SK_TICKS_PER_SEC CFG_HZ
+#endif
+
+#define SK_MEM_MAPPED_IO
+
+/* #define SK_RLMT_SLOW_LOOKAHEAD */
+
+#define SK_MAX_MACS 2
+#define SK_MAX_NETS 2
+
+#define SK_IOC char*
+
+typedef struct s_DrvRlmtMbuf SK_MBUF;
+
+#define SK_CONST64 INT64_C
+#define SK_CONSTU64 UINT64_C
+
+#define SK_MEMCPY(dest,src,size) memcpy(dest,src,size)
+#define SK_MEMCMP(s1,s2,size) memcmp(s1,s2,size)
+#define SK_MEMSET(dest,val,size) memset(dest,val,size)
+#define SK_STRLEN(pStr) strlen((char*)(pStr))
+#define SK_STRNCPY(pDest,pSrc,size) strncpy((char*)(pDest),(char*)(pSrc),size)
+#define SK_STRCMP(pStr1,pStr2) strcmp((char*)(pStr1),(char*)(pStr2))
+
+/* macros to access the adapter */
+#define SK_OUT8(b,a,v) writeb((v), ((b)+(a)))
+#define SK_OUT16(b,a,v) writew((v), ((b)+(a)))
+#define SK_OUT32(b,a,v) writel((v), ((b)+(a)))
+#define SK_IN8(b,a,pv) (*(pv) = readb((b)+(a)))
+#define SK_IN16(b,a,pv) (*(pv) = readw((b)+(a)))
+#define SK_IN32(b,a,pv) (*(pv) = readl((b)+(a)))
+
+#define int8_t char
+#define int16_t short
+#define int32_t long
+#define int64_t long long
+#define uint8_t u_char
+#define uint16_t u_short
+#define uint32_t u_long
+#define uint64_t unsigned long long
+#define t_scalar_t int
+#define t_uscalar_t unsigned int
+#define uintptr_t unsigned long
+
+#define __CONCAT__(A,B) A##B
+
+#define INT32_C(a) __CONCAT__(a,L)
+#define INT64_C(a) __CONCAT__(a,LL)
+#define UINT32_C(a) __CONCAT__(a,UL)
+#define UINT64_C(a) __CONCAT__(a,ULL)
+
+#ifdef DEBUG
+#define SK_DBG_PRINTF printk
+#ifndef SK_DEBUG_CHKMOD
+#define SK_DEBUG_CHKMOD 0
+#endif
+#ifndef SK_DEBUG_CHKCAT
+#define SK_DEBUG_CHKCAT 0
+#endif
+/* those come from the makefile */
+#define SK_DBG_CHKMOD(pAC) (SK_DEBUG_CHKMOD)
+#define SK_DBG_CHKCAT(pAC) (SK_DEBUG_CHKCAT)
+
+extern void SkDbgPrintf(const char *format,...);
+
+#define SK_DBGMOD_DRV 0x00010000
+
+/**** possible driver debug categories ********************************/
+#define SK_DBGCAT_DRV_ENTRY 0x00010000
+#define SK_DBGCAT_DRV_SAP 0x00020000
+#define SK_DBGCAT_DRV_MCA 0x00040000
+#define SK_DBGCAT_DRV_TX_PROGRESS 0x00080000
+#define SK_DBGCAT_DRV_RX_PROGRESS 0x00100000
+#define SK_DBGCAT_DRV_PROGRESS 0x00200000
+#define SK_DBGCAT_DRV_MSG 0x00400000
+#define SK_DBGCAT_DRV_PROM 0x00800000
+#define SK_DBGCAT_DRV_TX_FRAME 0x01000000
+#define SK_DBGCAT_DRV_ERROR 0x02000000
+#define SK_DBGCAT_DRV_INT_SRC 0x04000000
+#define SK_DBGCAT_DRV_EVENT 0x08000000
+
+#endif
+
+#define SK_ERR_LOG SkErrorLog
+
+extern void SkErrorLog(SK_AC*, int, int, char*);
+
+#endif
diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h
new file mode 100644
index 0000000..a311827
--- /dev/null
+++ b/drivers/net/sk98lin/h/skdrv2nd.h
@@ -0,0 +1,561 @@
+/******************************************************************************
+ *
+ * Name: skdrv2nd.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.15 $
+ * Date: $Date: 2003/02/25 14:16:40 $
+ * Purpose: Second header file for driver and all other modules
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skdrv2nd.h,v $
+ * Revision 1.15 2003/02/25 14:16:40 mlindner
+ * Fix: Copyright statement
+ *
+ * Revision 1.14 2003/02/25 13:26:26 mlindner
+ * Add: Support for various vendors
+ *
+ * Revision 1.13 2002/10/02 12:46:02 mlindner
+ * Add: Support for Yukon
+ *
+ * Revision 1.12.2.2 2001/09/05 12:14:50 mlindner
+ * add: New hardware revision int
+ *
+ * Revision 1.12.2.1 2001/03/12 16:50:59 mlindner
+ * chg: kernel 2.4 adaption
+ *
+ * Revision 1.12 2001/03/01 12:52:15 mlindner
+ * Fixed ring size
+ *
+ * Revision 1.11 2001/02/19 13:28:02 mlindner
+ * Changed PNMI parameter values
+ *
+ * Revision 1.10 2001/01/22 14:16:04 mlindner
+ * added ProcFs functionality
+ * Dual Net functionality integrated
+ * Rlmt networks added
+ *
+ * Revision 1.1 2000/10/05 19:46:50 phargrov
+ * Add directory src/vipk_devs_nonlbl/vipk_sk98lin/
+ * This is the SysKonnect SK-98xx Gigabit Ethernet driver,
+ * contributed by SysKonnect.
+ *
+ * Revision 1.9 2000/02/21 10:39:55 cgoos
+ * Added flag for jumbo support usage.
+ *
+ * Revision 1.8 1999/11/22 13:50:44 cgoos
+ * Changed license header to GPL.
+ * Fixed two comments.
+ *
+ * Revision 1.7 1999/09/28 12:38:21 cgoos
+ * Added CheckQueue to SK_AC.
+ *
+ * Revision 1.6 1999/07/27 08:04:05 cgoos
+ * Added checksumming variables to SK_AC.
+ *
+ * Revision 1.5 1999/03/29 12:33:26 cgoos
+ * Rreversed to fine lock granularity.
+ *
+ * Revision 1.4 1999/03/15 12:14:02 cgoos
+ * Added DriverLock to SK_AC.
+ * Removed other locks.
+ *
+ * Revision 1.3 1999/03/01 08:52:27 cgoos
+ * Changed pAC->PciDev declaration.
+ *
+ * Revision 1.2 1999/02/18 10:57:14 cgoos
+ * Removed SkDrvTimeStamp prototype.
+ * Fixed SkGeOsGetTime prototype.
+ *
+ * Revision 1.1 1999/02/16 07:41:01 cgoos
+ * First version.
+ *
+ *
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the second include file of the driver, which includes all other
+ * neccessary files and defines all structures and constants used by the
+ * driver and the common modules.
+ *
+ * Include File Hierarchy:
+ *
+ * see skge.c
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKDRV2ND_H
+#define __INC_SKDRV2ND_H
+
+#include "h/skqueue.h"
+#include "h/skgehwt.h"
+#include "h/sktimer.h"
+#include "h/ski2c.h"
+#include "h/skgepnmi.h"
+#include "h/skvpd.h"
+#include "h/skgehw.h"
+#include "h/skgeinit.h"
+#include "h/skaddr.h"
+#include "h/skgesirq.h"
+#include "h/skcsum.h"
+#include "h/skrlmt.h"
+#include "h/skgedrv.h"
+
+#define SK_PCI_ISCOMPLIANT(result, pdev) { \
+ result = SK_FALSE; /* default */ \
+ /* 3Com (0x10b7) */ \
+ if (pdev->vendor == 0x10b7) { \
+ /* Gigabit Ethernet Adapter (0x1700) */ \
+ if ((pdev->device == 0x1700)) { \
+ result = SK_TRUE; \
+ } \
+ /* SysKonnect (0x1148) */ \
+ } else if (pdev->vendor == 0x1148) { \
+ /* SK-98xx Gigabit Ethernet Server Adapter (0x4300) */ \
+ /* SK-98xx V2 Gigabit Ethernet Adapter (0x4320) */ \
+ if ((pdev->device == 0x4300) || \
+ (pdev->device == 0x4320)) { \
+ result = SK_TRUE; \
+ } \
+ /* D-Link (0x1186) */ \
+ } else if (pdev->vendor == 0x1186) { \
+ /* Gigabit Ethernet Adapter (0x4c00) */ \
+ if ((pdev->device == 0x4c00)) { \
+ result = SK_TRUE; \
+ } \
+ /* CNet (0x1371) */ \
+ } else if (pdev->vendor == 0x1371) { \
+ /* GigaCard Network Adapter (0x434e) */ \
+ if ((pdev->device == 0x434e)) { \
+ result = SK_TRUE; \
+ } \
+ /* Linksys (0x1737) */ \
+ } else if (pdev->vendor == 0x1737) { \
+ /* Gigabit Network Adapter (0x1032) */ \
+ /* Gigabit Network Adapter (0x1064) */ \
+ if ((pdev->device == 0x1032) || \
+ (pdev->device == 0x1064)) { \
+ result = SK_TRUE; \
+ } \
+ } else { \
+ result = SK_FALSE; \
+ } \
+}
+
+
+extern SK_MBUF *SkDrvAllocRlmtMbuf(SK_AC*, SK_IOC, unsigned);
+extern void SkDrvFreeRlmtMbuf(SK_AC*, SK_IOC, SK_MBUF*);
+extern SK_U64 SkOsGetTime(SK_AC*);
+extern int SkPciReadCfgDWord(SK_AC*, int, SK_U32*);
+extern int SkPciReadCfgWord(SK_AC*, int, SK_U16*);
+extern int SkPciReadCfgByte(SK_AC*, int, SK_U8*);
+extern int SkPciWriteCfgDWord(SK_AC*, int, SK_U32);
+extern int SkPciWriteCfgWord(SK_AC*, int, SK_U16);
+extern int SkPciWriteCfgByte(SK_AC*, int, SK_U8);
+extern int SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA);
+
+struct s_DrvRlmtMbuf {
+ SK_MBUF *pNext; /* Pointer to next RLMT Mbuf. */
+ SK_U8 *pData; /* Data buffer (virtually contig.). */
+ unsigned Size; /* Data buffer size. */
+ unsigned Length; /* Length of packet (<= Size). */
+ SK_U32 PortIdx; /* Receiving/transmitting port. */
+#ifdef SK_RLMT_MBUF_PRIVATE
+ SK_RLMT_MBUF Rlmt; /* Private part for RLMT. */
+#endif /* SK_RLMT_MBUF_PRIVATE */
+ struct sk_buff *pOs; /* Pointer to message block */
+};
+
+
+/*
+ * ioctl definitions
+ */
+#define SK_IOCTL_BASE (SIOCDEVPRIVATE)
+#define SK_IOCTL_GETMIB (SK_IOCTL_BASE + 0)
+#define SK_IOCTL_SETMIB (SK_IOCTL_BASE + 1)
+#define SK_IOCTL_PRESETMIB (SK_IOCTL_BASE + 2)
+
+typedef struct s_IOCTL SK_GE_IOCTL;
+
+struct s_IOCTL {
+ char* pData;
+ unsigned int Len;
+};
+
+
+/*
+ * define sizes of descriptor rings in bytes
+ */
+
+#if 0
+#define TX_RING_SIZE (8*1024)
+#define RX_RING_SIZE (24*1024)
+#else
+#define TX_RING_SIZE (10 * 40)
+#define RX_RING_SIZE (10 * 40)
+#endif
+
+/*
+ * Buffer size for ethernet packets
+ */
+#define ETH_BUF_SIZE 1540
+#define ETH_MAX_MTU 1514
+#define ETH_MIN_MTU 60
+#define ETH_MULTICAST_BIT 0x01
+#define SK_JUMBO_MTU 9000
+
+/*
+ * transmit priority selects the queue: LOW=asynchron, HIGH=synchron
+ */
+#define TX_PRIO_LOW 0
+#define TX_PRIO_HIGH 1
+
+/*
+ * alignment of rx/tx descriptors
+ */
+#define DESCR_ALIGN 8
+
+/*
+ * definitions for pnmi. TODO
+ */
+#define SK_DRIVER_RESET(pAC, IoC) 0
+#define SK_DRIVER_SENDEVENT(pAC, IoC) 0
+#define SK_DRIVER_SELFTEST(pAC, IoC) 0
+/* For get mtu you must add an own function */
+#define SK_DRIVER_GET_MTU(pAc,IoC,i) 0
+#define SK_DRIVER_SET_MTU(pAc,IoC,i,v) 0
+#define SK_DRIVER_PRESET_MTU(pAc,IoC,i,v) 0
+
+
+/* TX and RX descriptors *****************************************************/
+
+typedef struct s_RxD RXD; /* the receive descriptor */
+
+struct s_RxD {
+ volatile SK_U32 RBControl; /* Receive Buffer Control */
+ SK_U32 VNextRxd; /* Next receive descriptor,low dword */
+ SK_U32 VDataLow; /* Receive buffer Addr, low dword */
+ SK_U32 VDataHigh; /* Receive buffer Addr, high dword */
+ SK_U32 FrameStat; /* Receive Frame Status word */
+ SK_U32 TimeStamp; /* Time stamp from XMAC */
+ SK_U32 TcpSums; /* TCP Sum 2 / TCP Sum 1 */
+ SK_U32 TcpSumStarts; /* TCP Sum Start 2 / TCP Sum Start 1 */
+ RXD *pNextRxd; /* Pointer to next Rxd */
+ struct sk_buff *pMBuf; /* Pointer to Linux' socket buffer */
+};
+
+typedef struct s_TxD TXD; /* the transmit descriptor */
+
+struct s_TxD {
+ volatile SK_U32 TBControl; /* Transmit Buffer Control */
+ SK_U32 VNextTxd; /* Next transmit descriptor,low dword */
+ SK_U32 VDataLow; /* Transmit Buffer Addr, low dword */
+ SK_U32 VDataHigh; /* Transmit Buffer Addr, high dword */
+ SK_U32 FrameStat; /* Transmit Frame Status Word */
+ SK_U32 TcpSumOfs; /* Reserved / TCP Sum Offset */
+ SK_U16 TcpSumSt; /* TCP Sum Start */
+ SK_U16 TcpSumWr; /* TCP Sum Write */
+ SK_U32 TcpReserved; /* not used */
+ TXD *pNextTxd; /* Pointer to next Txd */
+ struct sk_buff *pMBuf; /* Pointer to Linux' socket buffer */
+};
+
+
+/* definition of flags in descriptor control field */
+#define RX_CTRL_OWN_BMU UINT32_C(0x80000000)
+#define RX_CTRL_STF UINT32_C(0x40000000)
+#define RX_CTRL_EOF UINT32_C(0x20000000)
+#define RX_CTRL_EOB_IRQ UINT32_C(0x10000000)
+#define RX_CTRL_EOF_IRQ UINT32_C(0x08000000)
+#define RX_CTRL_DEV_NULL UINT32_C(0x04000000)
+#define RX_CTRL_STAT_VALID UINT32_C(0x02000000)
+#define RX_CTRL_TIME_VALID UINT32_C(0x01000000)
+#define RX_CTRL_CHECK_DEFAULT UINT32_C(0x00550000)
+#define RX_CTRL_CHECK_CSUM UINT32_C(0x00560000)
+#define RX_CTRL_LEN_MASK UINT32_C(0x0000FFFF)
+
+#define TX_CTRL_OWN_BMU UINT32_C(0x80000000)
+#define TX_CTRL_STF UINT32_C(0x40000000)
+#define TX_CTRL_EOF UINT32_C(0x20000000)
+#define TX_CTRL_EOB_IRQ UINT32_C(0x10000000)
+#define TX_CTRL_EOF_IRQ UINT32_C(0x08000000)
+#define TX_CTRL_ST_FWD UINT32_C(0x04000000)
+#define TX_CTRL_DISAB_CRC UINT32_C(0x02000000)
+#define TX_CTRL_SOFTWARE UINT32_C(0x01000000)
+#define TX_CTRL_CHECK_DEFAULT UINT32_C(0x00550000)
+#define TX_CTRL_CHECK_CSUM UINT32_C(0x00560000)
+#define TX_CTRL_LEN_MASK UINT32_C(0x0000FFFF)
+
+
+/* The offsets of registers in the TX and RX queue control io area ***********/
+
+#define RX_Q_BUF_CTRL_CNT 0x00
+#define RX_Q_NEXT_DESCR_LOW 0x04
+#define RX_Q_BUF_ADDR_LOW 0x08
+#define RX_Q_BUF_ADDR_HIGH 0x0c
+#define RX_Q_FRAME_STAT 0x10
+#define RX_Q_TIME_STAMP 0x14
+#define RX_Q_CSUM_1_2 0x18
+#define RX_Q_CSUM_START_1_2 0x1c
+#define RX_Q_CUR_DESCR_LOW 0x20
+#define RX_Q_DESCR_HIGH 0x24
+#define RX_Q_CUR_ADDR_LOW 0x28
+#define RX_Q_CUR_ADDR_HIGH 0x2c
+#define RX_Q_CUR_BYTE_CNT 0x30
+#define RX_Q_CTRL 0x34
+#define RX_Q_FLAG 0x38
+#define RX_Q_TEST1 0x3c
+#define RX_Q_TEST2 0x40
+#define RX_Q_TEST3 0x44
+
+#define TX_Q_BUF_CTRL_CNT 0x00
+#define TX_Q_NEXT_DESCR_LOW 0x04
+#define TX_Q_BUF_ADDR_LOW 0x08
+#define TX_Q_BUF_ADDR_HIGH 0x0c
+#define TX_Q_FRAME_STAT 0x10
+#define TX_Q_CSUM_START 0x14
+#define TX_Q_CSUM_START_POS 0x18
+#define TX_Q_RESERVED 0x1c
+#define TX_Q_CUR_DESCR_LOW 0x20
+#define TX_Q_DESCR_HIGH 0x24
+#define TX_Q_CUR_ADDR_LOW 0x28
+#define TX_Q_CUR_ADDR_HIGH 0x2c
+#define TX_Q_CUR_BYTE_CNT 0x30
+#define TX_Q_CTRL 0x34
+#define TX_Q_FLAG 0x38
+#define TX_Q_TEST1 0x3c
+#define TX_Q_TEST2 0x40
+#define TX_Q_TEST3 0x44
+
+/* definition of flags in the queue control field */
+#define RX_Q_CTRL_POLL_ON 0x00000080
+#define RX_Q_CTRL_POLL_OFF 0x00000040
+#define RX_Q_CTRL_STOP 0x00000020
+#define RX_Q_CTRL_START 0x00000010
+#define RX_Q_CTRL_CLR_I_PAR 0x00000008
+#define RX_Q_CTRL_CLR_I_EOB 0x00000004
+#define RX_Q_CTRL_CLR_I_EOF 0x00000002
+#define RX_Q_CTRL_CLR_I_ERR 0x00000001
+
+#define TX_Q_CTRL_POLL_ON 0x00000080
+#define TX_Q_CTRL_POLL_OFF 0x00000040
+#define TX_Q_CTRL_STOP 0x00000020
+#define TX_Q_CTRL_START 0x00000010
+#define TX_Q_CTRL_CLR_I_EOB 0x00000004
+#define TX_Q_CTRL_CLR_I_EOF 0x00000002
+#define TX_Q_CTRL_CLR_I_ERR 0x00000001
+
+
+/* Interrupt bits in the interrupts source register **************************/
+#define IRQ_HW_ERROR 0x80000000
+#define IRQ_RESERVED 0x40000000
+#define IRQ_PKT_TOUT_RX1 0x20000000
+#define IRQ_PKT_TOUT_RX2 0x10000000
+#define IRQ_PKT_TOUT_TX1 0x08000000
+#define IRQ_PKT_TOUT_TX2 0x04000000
+#define IRQ_I2C_READY 0x02000000
+#define IRQ_SW 0x01000000
+#define IRQ_EXTERNAL_REG 0x00800000
+#define IRQ_TIMER 0x00400000
+#define IRQ_MAC1 0x00200000
+#define IRQ_LINK_SYNC_C_M1 0x00100000
+#define IRQ_MAC2 0x00080000
+#define IRQ_LINK_SYNC_C_M2 0x00040000
+#define IRQ_EOB_RX1 0x00020000
+#define IRQ_EOF_RX1 0x00010000
+#define IRQ_CHK_RX1 0x00008000
+#define IRQ_EOB_RX2 0x00004000
+#define IRQ_EOF_RX2 0x00002000
+#define IRQ_CHK_RX2 0x00001000
+#define IRQ_EOB_SY_TX1 0x00000800
+#define IRQ_EOF_SY_TX1 0x00000400
+#define IRQ_CHK_SY_TX1 0x00000200
+#define IRQ_EOB_AS_TX1 0x00000100
+#define IRQ_EOF_AS_TX1 0x00000080
+#define IRQ_CHK_AS_TX1 0x00000040
+#define IRQ_EOB_SY_TX2 0x00000020
+#define IRQ_EOF_SY_TX2 0x00000010
+#define IRQ_CHK_SY_TX2 0x00000008
+#define IRQ_EOB_AS_TX2 0x00000004
+#define IRQ_EOF_AS_TX2 0x00000002
+#define IRQ_CHK_AS_TX2 0x00000001
+
+#define DRIVER_IRQS (IRQ_SW | IRQ_EOF_RX1 | IRQ_EOF_RX2 | \
+ IRQ_EOF_SY_TX1 | IRQ_EOF_AS_TX1 | \
+ IRQ_EOF_SY_TX2 | IRQ_EOF_AS_TX2)
+
+#define SPECIAL_IRQS (IRQ_HW_ERROR | IRQ_PKT_TOUT_RX1 | IRQ_PKT_TOUT_RX2 | \
+ IRQ_PKT_TOUT_TX1 | IRQ_PKT_TOUT_TX2 | \
+ IRQ_I2C_READY | IRQ_EXTERNAL_REG | IRQ_TIMER | \
+ IRQ_MAC1 | IRQ_LINK_SYNC_C_M1 | \
+ IRQ_MAC2 | IRQ_LINK_SYNC_C_M2 | \
+ IRQ_CHK_RX1 | IRQ_CHK_RX2 | \
+ IRQ_CHK_SY_TX1 | IRQ_CHK_AS_TX1 | \
+ IRQ_CHK_SY_TX2 | IRQ_CHK_AS_TX2)
+
+#define IRQ_MASK (IRQ_SW | IRQ_EOB_RX1 | IRQ_EOF_RX1 | \
+ IRQ_EOB_RX2 | IRQ_EOF_RX2 | \
+ IRQ_EOB_SY_TX1 | IRQ_EOF_SY_TX1 | \
+ IRQ_EOB_AS_TX1 | IRQ_EOF_AS_TX1 | \
+ IRQ_EOB_SY_TX2 | IRQ_EOF_SY_TX2 | \
+ IRQ_EOB_AS_TX2 | IRQ_EOF_AS_TX2 | \
+ IRQ_HW_ERROR | IRQ_PKT_TOUT_RX1 | IRQ_PKT_TOUT_RX2 | \
+ IRQ_PKT_TOUT_TX1 | IRQ_PKT_TOUT_TX2 | \
+ IRQ_I2C_READY | IRQ_EXTERNAL_REG | IRQ_TIMER | \
+ IRQ_MAC1 | \
+ IRQ_MAC2 | \
+ IRQ_CHK_RX1 | IRQ_CHK_RX2 | \
+ IRQ_CHK_SY_TX1 | IRQ_CHK_AS_TX1 | \
+ IRQ_CHK_SY_TX2 | IRQ_CHK_AS_TX2)
+
+#define IRQ_HWE_MASK 0x00000FFF /* enable all HW irqs */
+
+typedef struct s_DevNet DEV_NET;
+
+struct s_DevNet {
+ int PortNr;
+ int NetNr;
+ int Mtu;
+ int Up;
+ SK_AC *pAC;
+};
+
+typedef struct s_TxPort TX_PORT;
+
+struct s_TxPort {
+ /* the transmit descriptor rings */
+ caddr_t pTxDescrRing; /* descriptor area memory */
+ SK_U64 VTxDescrRing; /* descr. area bus virt. addr. */
+ TXD *pTxdRingHead; /* Head of Tx rings */
+ TXD *pTxdRingTail; /* Tail of Tx rings */
+ TXD *pTxdRingPrev; /* descriptor sent previously */
+ int TxdRingFree; /* # of free entrys */
+#if 0
+ spinlock_t TxDesRingLock; /* serialize descriptor accesses */
+#endif
+ caddr_t HwAddr; /* bmu registers address */
+ int PortIndex; /* index number of port (0 or 1) */
+};
+
+typedef struct s_RxPort RX_PORT;
+
+struct s_RxPort {
+ /* the receive descriptor rings */
+ caddr_t pRxDescrRing; /* descriptor area memory */
+ SK_U64 VRxDescrRing; /* descr. area bus virt. addr. */
+ RXD *pRxdRingHead; /* Head of Rx rings */
+ RXD *pRxdRingTail; /* Tail of Rx rings */
+ RXD *pRxdRingPrev; /* descriptor given to BMU previously */
+ int RxdRingFree; /* # of free entrys */
+#if 0
+ spinlock_t RxDesRingLock; /* serialize descriptor accesses */
+#endif
+ int RxFillLimit; /* limit for buffers in ring */
+ caddr_t HwAddr; /* bmu registers address */
+ int PortIndex; /* index number of port (0 or 1) */
+};
+
+typedef struct s_PerStrm PER_STRM;
+
+#define SK_ALLOC_IRQ 0x00000001
+
+/****************************************************************************
+ * Per board structure / Adapter Context structure:
+ * Allocated within attach(9e) and freed within detach(9e).
+ * Contains all 'per device' necessary handles, flags, locks etc.:
+ */
+struct s_AC {
+ SK_GEINIT GIni; /* GE init struct */
+ SK_PNMI Pnmi; /* PNMI data struct */
+ SK_VPD vpd; /* vpd data struct */
+ SK_QUEUE Event; /* Event queue */
+ SK_HWT Hwt; /* Hardware Timer control struct */
+ SK_TIMCTRL Tim; /* Software Timer control struct */
+ SK_I2C I2c; /* I2C relevant data structure */
+ SK_ADDR Addr; /* for Address module */
+ SK_CSUM Csum; /* for checksum module */
+ SK_RLMT Rlmt; /* for rlmt module */
+#if 0
+ spinlock_t SlowPathLock; /* Normal IRQ lock */
+#endif
+ SK_PNMI_STRUCT_DATA PnmiStruct; /* structure to get all Pnmi-Data */
+ int RlmtMode; /* link check mode to set */
+ int RlmtNets; /* Number of nets */
+
+ SK_IOC IoBase; /* register set of adapter */
+ int BoardLevel; /* level of active hw init (0-2) */
+ char DeviceStr[80]; /* adapter string from vpd */
+ SK_U32 AllocFlag; /* flag allocation of resources */
+#if 0
+ struct pci_dev *PciDev; /* for access to pci config space */
+ SK_U32 PciDevId; /* pci device id */
+#else
+ int PciDev;
+#endif
+ struct SK_NET_DEVICE *dev[2]; /* pointer to device struct */
+ char Name[30]; /* driver name */
+ struct SK_NET_DEVICE *Next; /* link all devices (for clearing) */
+ int RxBufSize; /* length of receive buffers */
+#if 0
+ struct net_device_stats stats; /* linux 'netstat -i' statistics */
+#endif
+ int Index; /* internal board index number */
+
+ /* adapter RAM sizes for queues of active port */
+ int RxQueueSize; /* memory used for receive queue */
+ int TxSQueueSize; /* memory used for sync. tx queue */
+ int TxAQueueSize; /* memory used for async. tx queue */
+
+ int PromiscCount; /* promiscuous mode counter */
+ int AllMultiCount; /* allmulticast mode counter */
+ int MulticCount; /* number of different MC */
+ /* addresses for this board */
+ /* (may be more than HW can)*/
+
+ int HWRevision; /* Hardware revision */
+ int ActivePort; /* the active XMAC port */
+ int MaxPorts; /* number of activated ports */
+ int TxDescrPerRing; /* # of descriptors per tx ring */
+ int RxDescrPerRing; /* # of descriptors per rx ring */
+
+ caddr_t pDescrMem; /* Pointer to the descriptor area */
+ dma_addr_t pDescrMemDMA; /* PCI DMA address of area */
+
+ /* the port structures with descriptor rings */
+ TX_PORT TxPort[SK_MAX_MACS][2];
+ RX_PORT RxPort[SK_MAX_MACS];
+
+ unsigned int CsOfs1; /* for checksum calculation */
+ unsigned int CsOfs2; /* for checksum calculation */
+ SK_U32 CsOfs; /* for checksum calculation */
+
+ SK_BOOL CheckQueue; /* check event queue soon */
+
+ /* Only for tests */
+ int PortUp;
+ int PortDown;
+
+};
+
+#endif /* __INC_SKDRV2ND_H */
diff --git a/drivers/net/sk98lin/h/skerror.h b/drivers/net/sk98lin/h/skerror.h
new file mode 100644
index 0000000..a454d9d
--- /dev/null
+++ b/drivers/net/sk98lin/h/skerror.h
@@ -0,0 +1,80 @@
+/******************************************************************************
+ *
+ * Name: skerror.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.5 $
+ * Date: $Date: 2002/04/25 11:05:10 $
+ * Purpose: SK specific Error log support
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ * $Log: skerror.h,v $
+ * Revision 1.5 2002/04/25 11:05:10 rschmidt
+ * Editorial changes
+ *
+ * Revision 1.4 1999/11/22 13:51:59 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.3 1999/09/14 14:04:42 rwahl
+ * Added error base SK_ERRBASE_PECP.
+ * Changed error base for driver.
+ *
+ * Revision 1.2 1998/08/11 11:15:41 gklug
+ * chg: comments
+ *
+ * Revision 1.1 1998/08/11 11:09:38 gklug
+ * add: error bases
+ * add: error Classes
+ * first version
+ *
+ *
+ *
+ ******************************************************************************/
+
+#ifndef _INC_SKERROR_H_
+#define _INC_SKERROR_H_
+
+/*
+ * Define Error Classes
+ */
+#define SK_ERRCL_OTHER (0) /* Other error */
+#define SK_ERRCL_CONFIG (1L<<0) /* Configuration error */
+#define SK_ERRCL_INIT (1L<<1) /* Initialization error */
+#define SK_ERRCL_NORES (1L<<2) /* Out of Resources error */
+#define SK_ERRCL_SW (1L<<3) /* Internal Software error */
+#define SK_ERRCL_HW (1L<<4) /* Hardware Failure */
+#define SK_ERRCL_COMM (1L<<5) /* Communication error */
+
+
+/*
+ * Define Error Code Bases
+ */
+#define SK_ERRBASE_RLMT 100 /* Base Error number for RLMT */
+#define SK_ERRBASE_HWINIT 200 /* Base Error number for HWInit */
+#define SK_ERRBASE_VPD 300 /* Base Error number for VPD */
+#define SK_ERRBASE_PNMI 400 /* Base Error number for PNMI */
+#define SK_ERRBASE_CSUM 500 /* Base Error number for Checksum */
+#define SK_ERRBASE_SIRQ 600 /* Base Error number for Special IRQ */
+#define SK_ERRBASE_I2C 700 /* Base Error number for I2C module */
+#define SK_ERRBASE_QUEUE 800 /* Base Error number for Scheduler */
+#define SK_ERRBASE_ADDR 900 /* Base Error number for Address module */
+#define SK_ERRBASE_PECP 1000 /* Base Error number for PECP */
+#define SK_ERRBASE_DRV 1100 /* Base Error number for Driver */
+
+#endif /* _INC_SKERROR_H_ */
diff --git a/drivers/net/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h
new file mode 100644
index 0000000..72ba9ce
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgedrv.h
@@ -0,0 +1,72 @@
+/******************************************************************************
+ *
+ * Name: skgedrv.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.6 $
+ * Date: $Date: 2002/07/15 15:38:01 $
+ * Purpose: Interface with the driver
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgedrv.h,v $
+ * Revision 1.6 2002/07/15 15:38:01 rschmidt
+ * Power Management support
+ * Editorial changes
+ *
+ * Revision 1.5 2002/04/25 11:05:47 rschmidt
+ * Editorial changes
+ *
+ * Revision 1.4 1999/11/22 13:52:46 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.3 1998/12/01 13:31:39 cgoos
+ * SWITCH INTERN Event added.
+ *
+ * Revision 1.2 1998/11/25 08:28:38 gklug
+ * rmv: PORT SWITCH Event
+ *
+ * Revision 1.1 1998/09/29 06:14:07 gklug
+ * add: driver events (initial version)
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEDRV_H_
+#define __INC_SKGEDRV_H_
+
+/* defines ********************************************************************/
+
+/*
+ * Define the driver events.
+ * Usually the events are defined by the destination module.
+ * In case of the driver we put the definition of the events here.
+ */
+#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */
+#define SK_DRV_NET_UP 2 /* The net is operational */
+#define SK_DRV_NET_DOWN 3 /* The net is down */
+#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */
+#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */
+#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */
+#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */
+#define SK_DRV_PORT_FAIL 8 /* One port fails */
+#define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */
+#define SK_DRV_POWER_DOWN 10 /* Power down mode */
+
+#endif /* __INC_SKGEDRV_H_ */
diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h
new file mode 100644
index 0000000..2c98427
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgehw.h
@@ -0,0 +1,2336 @@
+/******************************************************************************
+ *
+ * Name: skgehw.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.49 $
+ * Date: $Date: 2003/01/28 09:43:49 $
+ * Purpose: Defines and Macros for the Gigabit Ethernet Adapter Product Family
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ * $Log: skgehw.h,v $
+ * Revision 1.49 2003/01/28 09:43:49 rschmidt
+ * Added defines for PCI-Spec. 2.3 IRQ
+ * Added defines for CLK_RUN (YUKON-Lite)
+ * Editorial changes
+ *
+ * Revision 1.48 2002/12/05 10:25:11 rschmidt
+ * Added defines for Half Duplex Burst Mode On/Off
+ * Added defines for Rx GMAC FIFO Flush feature
+ * Editorial changes
+ *
+ * Revision 1.47 2002/11/12 17:01:31 rschmidt
+ * Added defines for WOL_CTL_DEFAULT
+ * Editorial changes
+ *
+ * Revision 1.46 2002/10/14 14:47:57 rschmidt
+ * Corrected bit mask for HW self test results
+ * Added defines for WOL Registers
+ * Editorial changes
+ *
+ * Revision 1.45 2002/10/11 09:25:22 mkarl
+ * Added bit mask for HW self test results.
+ *
+ * Revision 1.44 2002/08/16 14:44:36 rschmidt
+ * Added define GPC_HWCFG_GMII_FIB for YUKON Fiber
+ *
+ * Revision 1.43 2002/08/12 13:31:50 rschmidt
+ * Corrected macros for GMAC Address Registers: GM_INADDR(),
+ * GM_OUTADDR(), GM_INHASH, GM_OUTHASH.
+ * Editorial changes
+ *
+ * Revision 1.42 2002/08/08 15:37:56 rschmidt
+ * Added defines for Power Management Capabilities
+ * Editorial changes
+ *
+ * Revision 1.41 2002/07/23 16:02:25 rschmidt
+ * Added macro WOL_REG() to access WOL reg. (HW-Bug in YUKON 1st rev.)
+ *
+ * Revision 1.40 2002/07/15 15:41:37 rschmidt
+ * Added new defines for Power Management Cap. & Control
+ * Editorial changes
+ *
+ * Revision 1.39 2002/06/10 09:37:07 rschmidt
+ * Added macros for the ADDR-Modul
+ *
+ * Revision 1.38 2002/06/05 08:15:19 rschmidt
+ * Added defines for WOL Registers
+ * Editorial changes
+ *
+ * Revision 1.37 2002/04/25 11:39:23 rschmidt
+ * Added new defines for PCI Our Register 1
+ * Added new registers and defines for YUKON (Rx FIFO, Tx FIFO,
+ * Time Stamp Timer, GMAC Control, GPHY Control,Link Control,
+ * GMAC IRQ Source and Mask, Wake-up Frame Pattern Match);
+ * Added new defines for Control/Status (VAUX available)
+ * Added Chip ID for YUKON
+ * Added define for descriptors with UDP ext. for YUKON
+ * Added macros to access the GMAC
+ * Added new Phy Type for Marvell 88E1011S (GPHY)
+ * Editorial changes
+ *
+ * Revision 1.36 2000/11/09 12:32:49 rassmann
+ * Renamed variables.
+ *
+ * Revision 1.35 2000/05/19 10:17:13 cgoos
+ * Added inactivity check in PHY_READ (in DEBUG mode only).
+ *
+ * Revision 1.34 1999/11/22 13:53:40 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.33 1999/08/27 11:17:10 malthoff
+ * It's more savely to put brackets around macro parameters.
+ * Brackets added for PHY_READ and PHY_WRITE.
+ *
+ * Revision 1.32 1999/05/19 07:31:01 cgoos
+ * Changes for 1000Base-T.
+ * Added HWAC_LINK_LED macro.
+ *
+ * Revision 1.31 1999/03/12 13:27:40 malthoff
+ * Remove __STDC__.
+ *
+ * Revision 1.30 1999/02/09 09:28:20 malthoff
+ * Add PCI_ERRBITS.
+ *
+ * Revision 1.29 1999/01/26 08:55:48 malthoff
+ * Bugfix: The 16 bit field relations inside the descriptor are
+ * endianess dependend if the descriptor reversal feature
+ * (PCI_REV_DESC bit in PCI_OUR_REG_2) is enabled.
+ * Drivers which use this feature has to set the define
+ * SK_USE_REV_DESC.
+ *
+ * Revision 1.28 1998/12/10 11:10:22 malthoff
+ * bug fix: IS_IRQ_STAT and IS_IRQ_MST_ERR has been twisted.
+ *
+ * Revision 1.27 1998/11/13 14:19:21 malthoff
+ * Bug Fix: The bit definition of B3_PA_CTRL has completely
+ * changed from HW Spec v1.3 to v1.5.
+ *
+ * Revision 1.26 1998/11/04 08:31:48 cgoos
+ * Fixed byte ordering in XM_OUTADDR/XM_OUTHASH macros.
+ *
+ * Revision 1.25 1998/11/04 07:16:25 cgoos
+ * Changed byte ordering in XM_INADDR/XM_INHASH again.
+ *
+ * Revision 1.24 1998/11/02 11:08:43 malthoff
+ * RxCtrl and TxCtrl must be volatile.
+ *
+ * Revision 1.23 1998/10/28 13:50:45 malthoff
+ * Fix: Endian support missing in XM_IN/OUT-ADDR/HASH macros.
+ *
+ * Revision 1.22 1998/10/26 08:01:36 malthoff
+ * RX_MFF_CTRL1 is split up into RX_MFF_CTRL1,
+ * RX_MFF_STAT_TO, and RX_MFF_TIST_TO.
+ * TX_MFF_CTRL1 is split up TX_MFF_CTRL1 and TX_MFF_WAF.
+ *
+ * Revision 1.21 1998/10/20 07:43:10 malthoff
+ * Fix: XM_IN/OUT/ADDR/HASH macros:
+ * The pointer must be casted.
+ *
+ * Revision 1.20 1998/10/19 15:53:59 malthoff
+ * Remove ML proto definitions.
+ *
+ * Revision 1.19 1998/10/16 14:40:17 gklug
+ * fix: typo B0_XM_IMSK regs
+ *
+ * Revision 1.18 1998/10/16 09:46:54 malthoff
+ * Remove temp defines for ML diag prototype.
+ * Fix register definition for B0_XM1_PHY_DATA, B0_XM1_PHY_DATA
+ * B0_XM2_PHY_DATA, B0_XM2_PHY_ADDR, B0_XA1_CSR, B0_XS1_CSR,
+ * B0_XS2_CSR, and B0_XA2_CSR.
+ *
+ * Revision 1.17 1998/10/14 06:03:14 cgoos
+ * Changed shifted constant to ULONG.
+ *
+ * Revision 1.16 1998/10/09 07:05:41 malthoff
+ * Rename ALL_PA_ENA_TO to PA_ENA_TO_ALL.
+ *
+ * Revision 1.15 1998/10/05 07:54:23 malthoff
+ * Split up RB_CTRL and it's bit definition into
+ * RB_CTRL, RB_TST1, and RB_TST2.
+ * Rename RB_RX_HTPP to RB_RX_LTPP.
+ * Add ALL_PA_ENA_TO. Modify F_WATER_MARK
+ * according to HW Spec. v1.5.
+ * Add MFF_TX_CTRL_DEF.
+ *
+ * Revision 1.14 1998/09/28 13:31:16 malthoff
+ * bug fix: B2_MAC_3 is 0x110 not 0x114
+ *
+ * Revision 1.13 1998/09/24 14:42:56 malthoff
+ * Split the RX_MFF_TST into RX_MFF_CTRL2,
+ * RX_MFF_TST1, and RX_MFF_TST2.
+ * Rename RX_MFF_CTRL to RX_MFF_CTRL1.
+ * Add BMU bit CSR_SV_IDLE.
+ * Add macros PHY_READ() and PHY_WRITE().
+ * Rename macro SK_ADDR() to SK_HW_ADDR()
+ * because of conflicts with the Address Module.
+ *
+ * Revision 1.12 1998/09/16 07:25:33 malthoff
+ * Change the parameter order in the XM_INxx and XM_OUTxx macros,
+ * to have the IoC as first parameter.
+ *
+ * Revision 1.11 1998/09/03 09:58:41 malthoff
+ * Rework the XM_xxx macros. Use {} instead of () to
+ * be compatible with SK_xxx macros which are defined
+ * with {}.
+ *
+ * Revision 1.10 1998/09/02 11:16:39 malthoff
+ * Temporary modify B2_I2C_SW to make tests with
+ * the GE/ML prototype.
+ *
+ * Revision 1.9 1998/08/19 09:11:49 gklug
+ * fix: struct are removed from c-source (see CCC)
+ * add: typedefs for all structs
+ *
+ * Revision 1.8 1998/08/18 08:27:27 malthoff
+ * Add some temporary workarounds to test GE
+ * sources with the ML.
+ *
+ * Revision 1.7 1998/07/03 14:42:26 malthoff
+ * bug fix: Correct macro XMA().
+ * Add temporary workaround to access the PCI config space over I/O
+ *
+ * Revision 1.6 1998/06/23 11:30:36 malthoff
+ * Remove ';' with ',' in macors.
+ *
+ * Revision 1.5 1998/06/22 14:20:57 malthoff
+ * Add macro SK_ADDR(Base,Addr).
+ *
+ * Revision 1.4 1998/06/19 13:35:43 malthoff
+ * change 'pGec' with 'pAC'
+ *
+ * Revision 1.3 1998/06/17 14:58:16 cvs
+ * Lost keywords reinserted.
+ *
+ * Revision 1.1 1998/06/17 14:16:36 cvs
+ * created
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEHW_H
+#define __INC_SKGEHW_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* defines ********************************************************************/
+
+#define BIT_31 (1UL << 31)
+#define BIT_30 (1L << 30)
+#define BIT_29 (1L << 29)
+#define BIT_28 (1L << 28)
+#define BIT_27 (1L << 27)
+#define BIT_26 (1L << 26)
+#define BIT_25 (1L << 25)
+#define BIT_24 (1L << 24)
+#define BIT_23 (1L << 23)
+#define BIT_22 (1L << 22)
+#define BIT_21 (1L << 21)
+#define BIT_20 (1L << 20)
+#define BIT_19 (1L << 19)
+#define BIT_18 (1L << 18)
+#define BIT_17 (1L << 17)
+#define BIT_16 (1L << 16)
+#define BIT_15 (1L << 15)
+#define BIT_14 (1L << 14)
+#define BIT_13 (1L << 13)
+#define BIT_12 (1L << 12)
+#define BIT_11 (1L << 11)
+#define BIT_10 (1L << 10)
+#define BIT_9 (1L << 9)
+#define BIT_8 (1L << 8)
+#define BIT_7 (1L << 7)
+#define BIT_6 (1L << 6)
+#define BIT_5 (1L << 5)
+#define BIT_4 (1L << 4)
+#define BIT_3 (1L << 3)
+#define BIT_2 (1L << 2)
+#define BIT_1 (1L << 1)
+#define BIT_0 1L
+
+#define BIT_15S (1U << 15)
+#define BIT_14S (1 << 14)
+#define BIT_13S (1 << 13)
+#define BIT_12S (1 << 12)
+#define BIT_11S (1 << 11)
+#define BIT_10S (1 << 10)
+#define BIT_9S (1 << 9)
+#define BIT_8S (1 << 8)
+#define BIT_7S (1 << 7)
+#define BIT_6S (1 << 6)
+#define BIT_5S (1 << 5)
+#define BIT_4S (1 << 4)
+#define BIT_3S (1 << 3)
+#define BIT_2S (1 << 2)
+#define BIT_1S (1 << 1)
+#define BIT_0S 1
+
+#define SHIFT31(x) ((x) << 31)
+#define SHIFT30(x) ((x) << 30)
+#define SHIFT29(x) ((x) << 29)
+#define SHIFT28(x) ((x) << 28)
+#define SHIFT27(x) ((x) << 27)
+#define SHIFT26(x) ((x) << 26)
+#define SHIFT25(x) ((x) << 25)
+#define SHIFT24(x) ((x) << 24)
+#define SHIFT23(x) ((x) << 23)
+#define SHIFT22(x) ((x) << 22)
+#define SHIFT21(x) ((x) << 21)
+#define SHIFT20(x) ((x) << 20)
+#define SHIFT19(x) ((x) << 19)
+#define SHIFT18(x) ((x) << 18)
+#define SHIFT17(x) ((x) << 17)
+#define SHIFT16(x) ((x) << 16)
+#define SHIFT15(x) ((x) << 15)
+#define SHIFT14(x) ((x) << 14)
+#define SHIFT13(x) ((x) << 13)
+#define SHIFT12(x) ((x) << 12)
+#define SHIFT11(x) ((x) << 11)
+#define SHIFT10(x) ((x) << 10)
+#define SHIFT9(x) ((x) << 9)
+#define SHIFT8(x) ((x) << 8)
+#define SHIFT7(x) ((x) << 7)
+#define SHIFT6(x) ((x) << 6)
+#define SHIFT5(x) ((x) << 5)
+#define SHIFT4(x) ((x) << 4)
+#define SHIFT3(x) ((x) << 3)
+#define SHIFT2(x) ((x) << 2)
+#define SHIFT1(x) ((x) << 1)
+#define SHIFT0(x) ((x) << 0)
+
+/*
+ * Configuration Space header
+ * Since this module is used for different OS', those may be
+ * duplicate on some of them (e.g. Linux). But to keep the
+ * common source, we have to live with this...
+ */
+#define PCI_VENDOR_ID 0x00 /* 16 bit Vendor ID */
+#define PCI_DEVICE_ID 0x02 /* 16 bit Device ID */
+#define PCI_COMMAND 0x04 /* 16 bit Command */
+#define PCI_STATUS 0x06 /* 16 bit Status */
+#define PCI_REV_ID 0x08 /* 8 bit Revision ID */
+#if 0
+#define PCI_CLASS_CODE 0x09 /* 24 bit Class Code */
+#endif
+#define PCI_CACHE_LSZ 0x0c /* 8 bit Cache Line Size */
+#define PCI_LAT_TIM 0x0d /* 8 bit Latency Timer */
+#define PCI_HEADER_T 0x0e /* 8 bit Header Type */
+#define PCI_BIST 0x0f /* 8 bit Built-in selftest */
+#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */
+#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */
+ /* Byte 0x18..0x2b: reserved */
+#define PCI_SUB_VID 0x2c /* 16 bit Subsystem Vendor ID */
+#define PCI_SUB_ID 0x2e /* 16 bit Subsystem ID */
+#define PCI_BASE_ROM 0x30 /* 32 bit Expansion ROM Base Address */
+#define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Ptr */
+ /* Byte 35..3b: reserved */
+#define PCI_IRQ_LINE 0x3c /* 8 bit Interrupt Line */
+#define PCI_IRQ_PIN 0x3d /* 8 bit Interrupt Pin */
+#define PCI_MIN_GNT 0x3e /* 8 bit Min_Gnt */
+#define PCI_MAX_LAT 0x3f /* 8 bit Max_Lat */
+ /* Device Dependent Region */
+#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */
+#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */
+ /* Power Management Region */
+#define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */
+#define PCI_PM_NITEM 0x49 /* 8 bit Next Item Ptr */
+#define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */
+#define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */
+ /* Byte 0x4e: reserved */
+#define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */
+ /* VPD Region */
+#define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */
+#define PCI_VPD_NITEM 0x51 /* 8 bit Next Item Ptr */
+#define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */
+#define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */
+ /* Byte 0x58..0xff: reserved */
+
+/*
+ * I2C Address (PCI Config)
+ *
+ * Note: The temperature and voltage sensors are relocated on a different
+ * I2C bus.
+ */
+#define I2C_ADDR_VPD 0xA0 /* I2C address for the VPD EEPROM */
+
+/*
+ * Define Bits and Values of the registers
+ */
+/* PCI_COMMAND 16 bit Command */
+ /* Bit 15..11: reserved */
+#define PCI_INT_DIS BIT_10S /* Interrupt INTx# disable (PCI 2.3) */
+#define PCI_FBTEN BIT_9S /* Fast Back-To-Back enable */
+#define PCI_SERREN BIT_8S /* SERR enable */
+#define PCI_ADSTEP BIT_7S /* Address Stepping */
+#define PCI_PERREN BIT_6S /* Parity Report Response enable */
+#define PCI_VGA_SNOOP BIT_5S /* VGA palette snoop */
+#define PCI_MWIEN BIT_4S /* Memory write an inv cycl ena */
+#define PCI_SCYCEN BIT_3S /* Special Cycle enable */
+#define PCI_BMEN BIT_2S /* Bus Master enable */
+#define PCI_MEMEN BIT_1S /* Memory Space Access enable */
+#define PCI_IOEN BIT_0S /* I/O Space Access enable */
+
+#define PCI_COMMAND_VAL (PCI_FBTEN | PCI_SERREN | PCI_PERREN | PCI_MWIEN |\
+ PCI_BMEN | PCI_MEMEN | PCI_IOEN)
+
+/* PCI_STATUS 16 bit Status */
+#define PCI_PERR BIT_15S /* Parity Error */
+#define PCI_SERR BIT_14S /* Signaled SERR */
+#define PCI_RMABORT BIT_13S /* Received Master Abort */
+#define PCI_RTABORT BIT_12S /* Received Target Abort */
+ /* Bit 11: reserved */
+#define PCI_DEVSEL (3<<9) /* Bit 10.. 9: DEVSEL Timing */
+#define PCI_DEV_FAST (0<<9) /* fast */
+#define PCI_DEV_MEDIUM (1<<9) /* medium */
+#define PCI_DEV_SLOW (2<<9) /* slow */
+#define PCI_DATAPERR BIT_8S /* DATA Parity error detected */
+#define PCI_FB2BCAP BIT_7S /* Fast Back-to-Back Capability */
+#define PCI_UDF BIT_6S /* User Defined Features */
+#define PCI_66MHZCAP BIT_5S /* 66 MHz PCI bus clock capable */
+#define PCI_NEWCAP BIT_4S /* New cap. list implemented */
+#define PCI_INT_STAT BIT_3S /* Interrupt INTx# Status (PCI 2.3) */
+ /* Bit 2.. 0: reserved */
+
+#define PCI_ERRBITS (PCI_PERR | PCI_SERR | PCI_RMABORT | PCI_RTABORT |\
+ PCI_DATAPERR)
+
+/* PCI_CLASS_CODE 24 bit Class Code */
+/* Byte 2: Base Class (02) */
+/* Byte 1: SubClass (00) */
+/* Byte 0: Programming Interface (00) */
+
+/* PCI_CACHE_LSZ 8 bit Cache Line Size */
+/* Possible values: 0,2,4,8,16,32,64,128 */
+
+/* PCI_HEADER_T 8 bit Header Type */
+#define PCI_HD_MF_DEV BIT_7S /* 0= single, 1= multi-func dev */
+#define PCI_HD_TYPE 0x7f /* Bit 6..0: Header Layout 0= normal */
+
+/* PCI_BIST 8 bit Built-in selftest */
+/* Built-in Self test not supported (optional) */
+
+/* PCI_BASE_1ST 32 bit 1st Base address */
+#define PCI_MEMSIZE 0x4000L /* use 16 kB Memory Base */
+#define PCI_MEMBASE_MSK 0xffffc000L /* Bit 31..14: Memory Base Address */
+#define PCI_MEMSIZE_MSK 0x00003ff0L /* Bit 13.. 4: Memory Size Req. */
+#define PCI_PREFEN BIT_3 /* Prefetchable */
+#define PCI_MEM_TYP (3L<<2) /* Bit 2.. 1: Memory Type */
+#define PCI_MEM32BIT (0L<<1) /* Base addr anywhere in 32 Bit range */
+#define PCI_MEM1M (1L<<1) /* Base addr below 1 MegaByte */
+#define PCI_MEM64BIT (2L<<1) /* Base addr anywhere in 64 Bit range */
+#define PCI_MEMSPACE BIT_0 /* Memory Space Indic. */
+
+/* PCI_BASE_2ND 32 bit 2nd Base address */
+#define PCI_IOBASE 0xffffff00L /* Bit 31.. 8: I/O Base address */
+#define PCI_IOSIZE 0x000000fcL /* Bit 7.. 2: I/O Size Requirements */
+ /* Bit 1: reserved */
+#define PCI_IOSPACE BIT_0 /* I/O Space Indicator */
+
+/* PCI_BASE_ROM 32 bit Expansion ROM Base Address */
+#define PCI_ROMBASE 0xfffe0000L /* Bit 31..17: ROM BASE address (1st)*/
+#define PCI_ROMBASZ (0x1cL<<14) /* Bit 16..14: Treat as BASE or SIZE */
+#define PCI_ROMSIZE (0x38L<<11) /* Bit 13..11: ROM Size Requirements */
+ /* Bit 10.. 1: reserved */
+#define PCI_ROMEN BIT_0 /* Address Decode enable */
+
+/* Device Dependent Region */
+/* PCI_OUR_REG_1 32 bit Our Register 1 */
+ /* Bit 31..29: reserved */
+#define PCI_PHY_COMA BIT_28 /* Set PHY to Coma Mode */
+#define PCI_EN_CAL BIT_27 /* Enable PCI buffer strength calibr. */
+#define PCI_DIS_CAL BIT_26 /* Disable PCI buffer strength calibr. */
+#define PCI_VIO BIT_25 /* PCI I/O Voltage, 0 = 3.3V, 1 = 5V */
+#define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */
+#define PCI_EN_IO BIT_23 /* Mapping to I/O space */
+#define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */
+ /* 1 = Map Flash to memory */
+ /* 0 = Disable addr. dec */
+#define PCI_PAGESIZE (3L<<20) /* Bit 21..20: FLASH Page Size */
+#define PCI_PAGE_16 (0L<<20) /* 16 k pages */
+#define PCI_PAGE_32K (1L<<20) /* 32 k pages */
+#define PCI_PAGE_64K (2L<<20) /* 64 k pages */
+#define PCI_PAGE_128K (3L<<20) /* 128 k pages */
+ /* Bit 19: reserved */
+#define PCI_PAGEREG (7L<<16) /* Bit 18..16: Page Register */
+#define PCI_NOTAR BIT_15 /* No turnaround cycle */
+#define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */
+#define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */
+#define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */
+#define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */
+#define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */
+#define PCI_BURST_DIS BIT_9 /* Burst Disable */
+#define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */
+#define PCI_SKEW_DAS (0xfL<<4) /* Bit 7.. 4: Skew Ctrl, DAS Ext */
+#define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */
+
+
+/* PCI_OUR_REG_2 32 bit Our Register 2 */
+#define PCI_VPD_WR_THR (0xffL<<24) /* Bit 31..24: VPD Write Threshold */
+#define PCI_DEV_SEL (0x7fL<<17) /* Bit 23..17: EEPROM Device Select */
+#define PCI_VPD_ROM_SZ (7L<<14) /* Bit 16..14: VPD ROM Size */
+ /* Bit 13..12: reserved */
+#define PCI_PATCH_DIR (0xfL<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */
+#define PCI_PATCH_DIR_3 BIT_11
+#define PCI_PATCH_DIR_2 BIT_10
+#define PCI_PATCH_DIR_1 BIT_9
+#define PCI_PATCH_DIR_0 BIT_8
+#define PCI_EXT_PATCHS (0xfL<<4) /* Bit 7.. 4: Extended Patches 3..0 */
+#define PCI_EXT_PATCH_3 BIT_7
+#define PCI_EXT_PATCH_2 BIT_6
+#define PCI_EXT_PATCH_1 BIT_5
+#define PCI_EXT_PATCH_0 BIT_4
+#define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */
+#define PCI_REV_DESC BIT_2 /* Reverse Desc. Bytes */
+ /* Bit 1: reserved */
+#define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */
+
+
+/* Power Management Region */
+/* PCI_PM_CAP_REG 16 bit Power Management Capabilities */
+#define PCI_PME_SUP_MSK (0x1f<<11) /* Bit 15..11: PM Event Support Mask */
+#define PCI_PME_D3C_SUP BIT_15S /* PME from D3cold Support (if Vaux) */
+#define PCI_PME_D3H_SUP BIT_14S /* PME from D3hot Support */
+#define PCI_PME_D2_SUP BIT_13S /* PME from D2 Support */
+#define PCI_PME_D1_SUP BIT_12S /* PME from D1 Support */
+#define PCI_PME_D0_SUP BIT_11S /* PME from D0 Support */
+#define PCI_PM_D2_SUP BIT_10S /* D2 Support in 33 MHz mode */
+#define PCI_PM_D1_SUP BIT_9S /* D1 Support */
+ /* Bit 8.. 6: reserved */
+#define PCI_PM_DSI BIT_5S /* Device Specific Initialization */
+#define PCI_PM_APS BIT_4S /* Auxialiary Power Source */
+#define PCI_PME_CLOCK BIT_3S /* PM Event Clock */
+#define PCI_PM_VER_MSK 7 /* Bit 2.. 0: PM PCI Spec. version */
+
+/* PCI_PM_CTL_STS 16 bit Power Management Control/Status */
+#define PCI_PME_STATUS BIT_15S /* PME Status (YUKON only) */
+#define PCI_PM_DAT_SCL (3<<13) /* Bit 14..13: Data Reg. scaling factor */
+#define PCI_PM_DAT_SEL (0xf<<9) /* Bit 12.. 9: PM data selector field */
+#define PCI_PME_EN BIT_8S /* Enable PME# generation (YUKON only) */
+ /* Bit 7.. 2: reserved */
+#define PCI_PM_STATE_MSK 3 /* Bit 1.. 0: Power Management State */
+
+#define PCI_PM_STATE_D0 0 /* D0: Operational (default) */
+#define PCI_PM_STATE_D1 1 /* D1: (YUKON only) */
+#define PCI_PM_STATE_D2 2 /* D2: (YUKON only) */
+#define PCI_PM_STATE_D3 3 /* D3: HOT, Power Down and Reset */
+
+/* VPD Region */
+/* PCI_VPD_ADR_REG 16 bit VPD Address Register */
+#define PCI_VPD_FLAG BIT_15S /* starts VPD rd/wr cycle */
+#define PCI_VPD_ADR_MSK 0x7fffL /* Bit 14.. 0: VPD address mask */
+
+/* Control Register File (Address Map) */
+
+/*
+ * Bank 0
+ */
+#define B0_RAP 0x0000 /* 8 bit Register Address Port */
+ /* 0x0001 - 0x0003: reserved */
+#define B0_CTST 0x0004 /* 16 bit Control/Status register */
+#define B0_LED 0x0006 /* 8 Bit LED register */
+#define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */
+#define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */
+#define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */
+#define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */
+#define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */
+#define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg */
+ /* 0x001c: reserved */
+
+/* B0 XMAC 1 registers (GENESIS only) */
+#define B0_XM1_IMSK 0x0020 /* 16 bit r/w XMAC 1 Interrupt Mask Register*/
+ /* 0x0022 - 0x0027: reserved */
+#define B0_XM1_ISRC 0x0028 /* 16 bit ro XMAC 1 Interrupt Status Reg */
+ /* 0x002a - 0x002f: reserved */
+#define B0_XM1_PHY_ADDR 0x0030 /* 16 bit r/w XMAC 1 PHY Address Register */
+ /* 0x0032 - 0x0033: reserved */
+#define B0_XM1_PHY_DATA 0x0034 /* 16 bit r/w XMAC 1 PHY Data Register */
+ /* 0x0036 - 0x003f: reserved */
+
+/* B0 XMAC 2 registers (GENESIS only) */
+#define B0_XM2_IMSK 0x0040 /* 16 bit r/w XMAC 2 Interrupt Mask Register*/
+ /* 0x0042 - 0x0047: reserved */
+#define B0_XM2_ISRC 0x0048 /* 16 bit ro XMAC 2 Interrupt Status Reg */
+ /* 0x004a - 0x004f: reserved */
+#define B0_XM2_PHY_ADDR 0x0050 /* 16 bit r/w XMAC 2 PHY Address Register */
+ /* 0x0052 - 0x0053: reserved */
+#define B0_XM2_PHY_DATA 0x0054 /* 16 bit r/w XMAC 2 PHY Data Register */
+ /* 0x0056 - 0x005f: reserved */
+
+/* BMU Control Status Registers */
+#define B0_R1_CSR 0x0060 /* 32 bit BMU Ctrl/Stat Rx Queue 1 */
+#define B0_R2_CSR 0x0064 /* 32 bit BMU Ctrl/Stat Rx Queue 2 */
+#define B0_XS1_CSR 0x0068 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */
+#define B0_XA1_CSR 0x006c /* 32 bit BMU Ctrl/Stat Async Tx Queue 1*/
+#define B0_XS2_CSR 0x0070 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */
+#define B0_XA2_CSR 0x0074 /* 32 bit BMU Ctrl/Stat Async Tx Queue 2*/
+ /* 0x0078 - 0x007f: reserved */
+
+/*
+ * Bank 1
+ * - completely empty (this is the RAP Block window)
+ * Note: if RAP = 1 this page is reserved
+ */
+
+/*
+ * Bank 2
+ */
+/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */
+#define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */
+ /* 0x0106 - 0x0107: reserved */
+#define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */
+ /* 0x010e - 0x010f: reserved */
+#define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */
+ /* 0x0116 - 0x0117: reserved */
+#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */
+#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */
+#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */
+#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */
+ /* Eprom registers are currently of no use */
+#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */
+#define B2_E_1 0x011d /* 8 bit EPROM Byte 1 (PHY type) */
+#define B2_E_2 0x011e /* 8 bit EPROM Byte 2 */
+#define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */
+#define B2_FAR 0x0120 /* 32 bit Flash-Prom Addr Reg/Cnt */
+#define B2_FDP 0x0124 /* 8 bit Flash-Prom Data Port */
+ /* 0x0125 - 0x0127: reserved */
+#define B2_LD_CRTL 0x0128 /* 8 bit EPROM loader control register */
+#define B2_LD_TEST 0x0129 /* 8 bit EPROM loader test register */
+ /* 0x012a - 0x012f: reserved */
+#define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */
+#define B2_TI_VAL 0x0134 /* 32 bit Timer Value */
+#define B2_TI_CRTL 0x0138 /* 8 bit Timer Control */
+#define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */
+ /* 0x013a - 0x013f: reserved */
+#define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/
+#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */
+#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */
+#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */
+#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */
+#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */
+ /* 0x0154 - 0x0157: reserved */
+#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */
+#define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */
+ /* 0x015a - 0x015b: reserved */
+#define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */
+#define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */
+#define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */
+#define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */
+#define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */
+
+/* Blink Source Counter (GENESIS only) */
+#define B2_BSC_INI 0x0170 /* 32 bit Blink Source Counter Init Val */
+#define B2_BSC_VAL 0x0174 /* 32 bit Blink Source Counter Value */
+#define B2_BSC_CTRL 0x0178 /* 8 bit Blink Source Counter Control */
+#define B2_BSC_STAT 0x0179 /* 8 bit Blink Source Counter Status */
+#define B2_BSC_TST 0x017a /* 16 bit Blink Source Counter Test Reg */
+ /* 0x017c - 0x017f: reserved */
+
+/*
+ * Bank 3
+ */
+/* RAM Random Registers */
+#define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */
+#define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */
+#define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */
+ /* 0x018c - 0x018f: reserved */
+
+/* RAM Interface Registers */
+/*
+ * The HW-Spec. calls this registers Timeout Value 0..11. But this names are
+ * not usable in SW. Please notice these are NOT real timeouts, these are
+ * the number of qWords transferred continuously.
+ */
+#define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */
+#define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */
+#define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */
+#define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */
+#define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */
+#define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */
+#define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */
+#define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */
+#define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */
+#define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */
+#define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/
+#define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/
+#define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */
+ /* 0x019d - 0x019f: reserved */
+#define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */
+#define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */
+ /* 0x01a3 - 0x01af: reserved */
+
+/* MAC Arbiter Registers (GENESIS only) */
+/* these are the no. of qWord transferred continuously and NOT real timeouts */
+#define B3_MA_TOINI_RX1 0x01b0 /* 8 bit Timeout Init Val Rx Path MAC 1 */
+#define B3_MA_TOINI_RX2 0x01b1 /* 8 bit Timeout Init Val Rx Path MAC 2 */
+#define B3_MA_TOINI_TX1 0x01b2 /* 8 bit Timeout Init Val Tx Path MAC 1 */
+#define B3_MA_TOINI_TX2 0x01b3 /* 8 bit Timeout Init Val Tx Path MAC 2 */
+#define B3_MA_TOVAL_RX1 0x01b4 /* 8 bit Timeout Value Rx Path MAC 1 */
+#define B3_MA_TOVAL_RX2 0x01b5 /* 8 bit Timeout Value Rx Path MAC 1 */
+#define B3_MA_TOVAL_TX1 0x01b6 /* 8 bit Timeout Value Tx Path MAC 2 */
+#define B3_MA_TOVAL_TX2 0x01b7 /* 8 bit Timeout Value Tx Path MAC 2 */
+#define B3_MA_TO_CTRL 0x01b8 /* 16 bit MAC Arbiter Timeout Ctrl Reg */
+#define B3_MA_TO_TEST 0x01ba /* 16 bit MAC Arbiter Timeout Test Reg */
+ /* 0x01bc - 0x01bf: reserved */
+#define B3_MA_RCINI_RX1 0x01c0 /* 8 bit Recovery Init Val Rx Path MAC 1 */
+#define B3_MA_RCINI_RX2 0x01c1 /* 8 bit Recovery Init Val Rx Path MAC 2 */
+#define B3_MA_RCINI_TX1 0x01c2 /* 8 bit Recovery Init Val Tx Path MAC 1 */
+#define B3_MA_RCINI_TX2 0x01c3 /* 8 bit Recovery Init Val Tx Path MAC 2 */
+#define B3_MA_RCVAL_RX1 0x01c4 /* 8 bit Recovery Value Rx Path MAC 1 */
+#define B3_MA_RCVAL_RX2 0x01c5 /* 8 bit Recovery Value Rx Path MAC 1 */
+#define B3_MA_RCVAL_TX1 0x01c6 /* 8 bit Recovery Value Tx Path MAC 2 */
+#define B3_MA_RCVAL_TX2 0x01c7 /* 8 bit Recovery Value Tx Path MAC 2 */
+#define B3_MA_RC_CTRL 0x01c8 /* 16 bit MAC Arbiter Recovery Ctrl Reg */
+#define B3_MA_RC_TEST 0x01ca /* 16 bit MAC Arbiter Recovery Test Reg */
+ /* 0x01cc - 0x01cf: reserved */
+
+/* Packet Arbiter Registers (GENESIS only) */
+/* these are real timeouts */
+#define B3_PA_TOINI_RX1 0x01d0 /* 16 bit Timeout Init Val Rx Path MAC 1 */
+ /* 0x01d2 - 0x01d3: reserved */
+#define B3_PA_TOINI_RX2 0x01d4 /* 16 bit Timeout Init Val Rx Path MAC 2 */
+ /* 0x01d6 - 0x01d7: reserved */
+#define B3_PA_TOINI_TX1 0x01d8 /* 16 bit Timeout Init Val Tx Path MAC 1 */
+ /* 0x01da - 0x01db: reserved */
+#define B3_PA_TOINI_TX2 0x01dc /* 16 bit Timeout Init Val Tx Path MAC 2 */
+ /* 0x01de - 0x01df: reserved */
+#define B3_PA_TOVAL_RX1 0x01e0 /* 16 bit Timeout Val Rx Path MAC 1 */
+ /* 0x01e2 - 0x01e3: reserved */
+#define B3_PA_TOVAL_RX2 0x01e4 /* 16 bit Timeout Val Rx Path MAC 2 */
+ /* 0x01e6 - 0x01e7: reserved */
+#define B3_PA_TOVAL_TX1 0x01e8 /* 16 bit Timeout Val Tx Path MAC 1 */
+ /* 0x01ea - 0x01eb: reserved */
+#define B3_PA_TOVAL_TX2 0x01ec /* 16 bit Timeout Val Tx Path MAC 2 */
+ /* 0x01ee - 0x01ef: reserved */
+#define B3_PA_CTRL 0x01f0 /* 16 bit Packet Arbiter Ctrl Register */
+#define B3_PA_TEST 0x01f2 /* 16 bit Packet Arbiter Test Register */
+ /* 0x01f4 - 0x01ff: reserved */
+
+/*
+ * Bank 4 - 5
+ */
+/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
+#define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/
+#define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */
+#define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */
+#define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */
+#define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */
+#define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */
+#define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */
+ /* 0x0213 - 0x027f: reserved */
+ /* 0x0280 - 0x0292: MAC 2 */
+ /* 0x0213 - 0x027f: reserved */
+
+/*
+ * Bank 6
+ */
+/* External registers (GENESIS only) */
+#define B6_EXT_REG 0x0300
+
+/*
+ * Bank 7
+ */
+/* This is a copy of the Configuration register file (lower half) */
+#define B7_CFG_SPC 0x0380
+
+/*
+ * Bank 8 - 15
+ */
+/* Receive and Transmit Queue Registers, use Q_ADDR() to access */
+#define B8_Q_REGS 0x0400
+
+/* Queue Register Offsets, use Q_ADDR() to access */
+#define Q_D 0x00 /* 8*32 bit Current Descriptor */
+#define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */
+#define Q_DA_H 0x24 /* 32 bit Current Descriptor Address High dWord */
+#define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */
+#define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */
+#define Q_BC 0x30 /* 32 bit Current Byte Counter */
+#define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */
+#define Q_F 0x38 /* 32 bit Flag Register */
+#define Q_T1 0x3c /* 32 bit Test Register 1 */
+#define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */
+#define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */
+#define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */
+#define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */
+#define Q_T2 0x40 /* 32 bit Test Register 2 */
+#define Q_T3 0x44 /* 32 bit Test Register 3 */
+ /* 0x48 - 0x7f: reserved */
+
+/*
+ * Bank 16 - 23
+ */
+/* RAM Buffer Registers */
+#define B16_RAM_REGS 0x0800
+
+/* RAM Buffer Register Offsets, use RB_ADDR() to access */
+#define RB_START 0x00 /* 32 bit RAM Buffer Start Address */
+#define RB_END 0x04 /* 32 bit RAM Buffer End Address */
+#define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */
+#define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */
+#define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Pack */
+#define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Pack */
+#define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */
+#define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */
+ /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */
+#define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */
+#define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */
+#define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */
+#define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */
+#define RB_TST2 0x2A /* 8 bit RAM Buffer Test Register 2 */
+ /* 0x2c - 0x7f: reserved */
+
+/*
+ * Bank 24
+ */
+/*
+ * Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only)
+ * use MR_ADDR() to access
+ */
+#define RX_MFF_EA 0x0c00 /* 32 bit Receive MAC FIFO End Address */
+#define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer */
+ /* 0x0c08 - 0x0c0b: reserved */
+#define RX_MFF_RP 0x0c0c /* 32 bit Receive MAC FIFO Read Pointer */
+#define RX_MFF_PC 0x0c10 /* 32 bit Receive MAC FIFO Packet Cnt */
+#define RX_MFF_LEV 0x0c14 /* 32 bit Receive MAC FIFO Level */
+#define RX_MFF_CTRL1 0x0c18 /* 16 bit Receive MAC FIFO Control Reg 1*/
+#define RX_MFF_STAT_TO 0x0c1a /* 8 bit Receive MAC Status Timeout */
+#define RX_MFF_TIST_TO 0x0c1b /* 8 bit Receive MAC Time Stamp Timeout */
+#define RX_MFF_CTRL2 0x0c1c /* 8 bit Receive MAC FIFO Control Reg 2*/
+#define RX_MFF_TST1 0x0c1d /* 8 bit Receive MAC FIFO Test Reg 1 */
+#define RX_MFF_TST2 0x0c1e /* 8 bit Receive MAC FIFO Test Reg 2 */
+ /* 0x0c1f: reserved */
+#define RX_LED_INI 0x0c20 /* 32 bit Receive LED Cnt Init Value */
+#define RX_LED_VAL 0x0c24 /* 32 bit Receive LED Cnt Current Value */
+#define RX_LED_CTRL 0x0c28 /* 8 bit Receive LED Cnt Control Reg */
+#define RX_LED_TST 0x0c29 /* 8 bit Receive LED Cnt Test Register */
+ /* 0x0c2a - 0x0c2f: reserved */
+#define LNK_SYNC_INI 0x0c30 /* 32 bit Link Sync Cnt Init Value */
+#define LNK_SYNC_VAL 0x0c34 /* 32 bit Link Sync Cnt Current Value */
+#define LNK_SYNC_CTRL 0x0c38 /* 8 bit Link Sync Cnt Control Register */
+#define LNK_SYNC_TST 0x0c39 /* 8 bit Link Sync Cnt Test Register */
+ /* 0x0c3a - 0x0c3b: reserved */
+#define LNK_LED_REG 0x0c3c /* 8 bit Link LED Register */
+ /* 0x0c3d - 0x0c3f: reserved */
+
+/* Receive GMAC FIFO (YUKON only), use MR_ADDR() to access */
+#define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */
+#define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */
+#define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */
+#define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */
+#define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */
+ /* 0x0c54 - 0x0c5f: reserved */
+#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */
+ /* 0x0c64 - 0x0c67: reserved */
+#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */
+ /* 0x0c6c - 0x0c6f: reserved */
+#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */
+ /* 0x0c74 - 0x0c77: reserved */
+#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */
+ /* 0x0c7c - 0x0c7f: reserved */
+
+/*
+ * Bank 25
+ */
+ /* 0x0c80 - 0x0cbf: MAC 2 */
+ /* 0x0cc0 - 0x0cff: reserved */
+
+/*
+ * Bank 26
+ */
+/*
+ * Transmit MAC FIFO and Transmit LED Registers (GENESIS only),
+ * use MR_ADDR() to access
+ */
+#define TX_MFF_EA 0x0d00 /* 32 bit Transmit MAC FIFO End Address */
+#define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */
+#define TX_MFF_WSP 0x0d08 /* 32 bit Transmit MAC FIFO WR Shadow Ptr */
+#define TX_MFF_RP 0x0d0c /* 32 bit Transmit MAC FIFO RD Pointer */
+#define TX_MFF_PC 0x0d10 /* 32 bit Transmit MAC FIFO Packet Cnt */
+#define TX_MFF_LEV 0x0d14 /* 32 bit Transmit MAC FIFO Level */
+#define TX_MFF_CTRL1 0x0d18 /* 16 bit Transmit MAC FIFO Ctrl Reg 1 */
+#define TX_MFF_WAF 0x0d1a /* 8 bit Transmit MAC Wait after flush */
+ /* 0x0c1b: reserved */
+#define TX_MFF_CTRL2 0x0d1c /* 8 bit Transmit MAC FIFO Ctrl Reg 2 */
+#define TX_MFF_TST1 0x0d1d /* 8 bit Transmit MAC FIFO Test Reg 1 */
+#define TX_MFF_TST2 0x0d1e /* 8 bit Transmit MAC FIFO Test Reg 2 */
+ /* 0x0d1f: reserved */
+#define TX_LED_INI 0x0d20 /* 32 bit Transmit LED Cnt Init Value */
+#define TX_LED_VAL 0x0d24 /* 32 bit Transmit LED Cnt Current Val */
+#define TX_LED_CTRL 0x0d28 /* 8 bit Transmit LED Cnt Control Reg */
+#define TX_LED_TST 0x0d29 /* 8 bit Transmit LED Cnt Test Reg */
+ /* 0x0d2a - 0x0d3f: reserved */
+
+/* Transmit GMAC FIFO (YUKON only), use MR_ADDR() to access */
+#define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */
+#define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
+#define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */
+ /* 0x0d4c - 0x0d5f: reserved */
+#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */
+#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Ptr. */
+#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */
+ /* 0x0d6c - 0x0d6f: reserved */
+#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */
+#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */
+#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */
+ /* 0x0d7c - 0x0d7f: reserved */
+
+/*
+ * Bank 27
+ */
+ /* 0x0d80 - 0x0dbf: MAC 2 */
+ /* 0x0daa - 0x0dff: reserved */
+
+/*
+ * Bank 28
+ */
+/* Descriptor Poll Timer Registers */
+#define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */
+#define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */
+#define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */
+ /* 0x0e09: reserved */
+#define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */
+ /* 0x0e0b: reserved */
+
+/* Time Stamp Timer Registers (YUKON only) */
+ /* 0x0e10: reserved */
+#define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */
+#define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */
+ /* 0x0e19: reserved */
+#define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */
+ /* 0x0e1b - 0x0e7f: reserved */
+
+/*
+ * Bank 29
+ */
+ /* 0x0e80 - 0x0efc: reserved */
+
+/*
+ * Bank 30
+ */
+/* GMAC and GPHY Control Registers (YUKON only) */
+#define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */
+#define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */
+#define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */
+ /* 0x0f09 - 0x0f0b: reserved */
+#define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */
+ /* 0x0f0d - 0x0f0f: reserved */
+#define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */
+ /* 0x0f14 - 0x0f1f: reserved */
+
+/* Wake-up Frame Pattern Match Control Registers (YUKON only) */
+
+#define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */
+
+#define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */
+#define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */
+#define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */
+#define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */
+#define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */
+#define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Ptr */
+
+/* use this macro to access above registers */
+#define WOL_REG(Reg) ((Reg) + (pAC->GIni.GIWolOffs))
+
+
+/* WOL Pattern Length Registers (YUKON only) */
+
+#define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */
+#define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */
+
+/* WOL Pattern Counter Registers (YUKON only) */
+
+#define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */
+#define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */
+ /* 0x0f40 - 0x0f7f: reserved */
+
+/*
+ * Bank 31
+ */
+/* 0x0f80 - 0x0fff: reserved */
+
+/*
+ * Bank 32 - 33
+ */
+#define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */
+
+/*
+ * Bank 0x22 - 0x3f
+ */
+/* 0x1100 - 0x1fff: reserved */
+
+/*
+ * Bank 0x40 - 0x4f
+ */
+#define BASE_XMAC_1 0x2000 /* XMAC 1 registers */
+
+/*
+ * Bank 0x50 - 0x5f
+ */
+
+#define BASE_GMAC_1 0x2800 /* GMAC 1 registers */
+
+/*
+ * Bank 0x60 - 0x6f
+ */
+#define BASE_XMAC_2 0x3000 /* XMAC 2 registers */
+
+/*
+ * Bank 0x70 - 0x7f
+ */
+#define BASE_GMAC_2 0x3800 /* GMAC 2 registers */
+
+/*
+ * Control Register Bit Definitions:
+ */
+/* B0_RAP 8 bit Register Address Port */
+ /* Bit 7: reserved */
+#define RAP_RAP 0x3f /* Bit 6..0: 0 = block 0,..,6f = block 6f */
+
+/* B0_CTST 16 bit Control/Status register */
+ /* Bit 15..14: reserved */
+#define CS_CLK_RUN_HOT BIT_13S /* CLK_RUN hot m. (YUKON-Lite only) */
+#define CS_CLK_RUN_RST BIT_12S /* CLK_RUN reset (YUKON-Lite only) */
+#define CS_CLK_RUN_ENA BIT_11S /* CLK_RUN enable (YUKON-Lite only) */
+#define CS_VAUX_AVAIL BIT_10S /* VAUX available (YUKON only) */
+#define CS_BUS_CLOCK BIT_9S /* Bus Clock 0/1 = 33/66 MHz */
+#define CS_BUS_SLOT_SZ BIT_8S /* Slot Size 0/1 = 32/64 bit slot */
+#define CS_ST_SW_IRQ BIT_7S /* Set IRQ SW Request */
+#define CS_CL_SW_IRQ BIT_6S /* Clear IRQ SW Request */
+#define CS_STOP_DONE BIT_5S /* Stop Master is finished */
+#define CS_STOP_MAST BIT_4S /* Command Bit to stop the master */
+#define CS_MRST_CLR BIT_3S /* Clear Master reset */
+#define CS_MRST_SET BIT_2S /* Set Master reset */
+#define CS_RST_CLR BIT_1S /* Clear Software reset */
+#define CS_RST_SET BIT_0S /* Set Software reset */
+
+/* B0_LED 8 Bit LED register */
+ /* Bit 7.. 2: reserved */
+#define LED_STAT_ON BIT_1S /* Status LED on */
+#define LED_STAT_OFF BIT_0S /* Status LED off */
+
+/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */
+#define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */
+#define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */
+#define PC_VCC_ENA BIT_5 /* Switch VCC Enable */
+#define PC_VCC_DIS BIT_4 /* Switch VCC Disable */
+#define PC_VAUX_ON BIT_3 /* Switch VAUX On */
+#define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */
+#define PC_VCC_ON BIT_1 /* Switch VCC On */
+#define PC_VCC_OFF BIT_0 /* Switch VCC Off */
+
+/* B0_ISRC 32 bit Interrupt Source Register */
+/* B0_IMSK 32 bit Interrupt Mask Register */
+/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */
+/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */
+#define IS_ALL_MSK 0xbfffffffL /* All Interrupt bits */
+#define IS_HW_ERR BIT_31 /* Interrupt HW Error */
+ /* Bit 30: reserved */
+#define IS_PA_TO_RX1 BIT_29 /* Packet Arb Timeout Rx1 */
+#define IS_PA_TO_RX2 BIT_28 /* Packet Arb Timeout Rx2 */
+#define IS_PA_TO_TX1 BIT_27 /* Packet Arb Timeout Tx1 */
+#define IS_PA_TO_TX2 BIT_26 /* Packet Arb Timeout Tx2 */
+#define IS_I2C_READY BIT_25 /* IRQ on end of I2C Tx */
+#define IS_IRQ_SW BIT_24 /* SW forced IRQ */
+#define IS_EXT_REG BIT_23 /* IRQ from LM80 or PHY (GENESIS only) */
+ /* IRQ from PHY (YUKON only) */
+#define IS_TIMINT BIT_22 /* IRQ from Timer */
+#define IS_MAC1 BIT_21 /* IRQ from MAC 1 */
+#define IS_LNK_SYNC_M1 BIT_20 /* Link Sync Cnt wrap MAC 1 */
+#define IS_MAC2 BIT_19 /* IRQ from MAC 2 */
+#define IS_LNK_SYNC_M2 BIT_18 /* Link Sync Cnt wrap MAC 2 */
+/* Receive Queue 1 */
+#define IS_R1_B BIT_17 /* Q_R1 End of Buffer */
+#define IS_R1_F BIT_16 /* Q_R1 End of Frame */
+#define IS_R1_C BIT_15 /* Q_R1 Encoding Error */
+/* Receive Queue 2 */
+#define IS_R2_B BIT_14 /* Q_R2 End of Buffer */
+#define IS_R2_F BIT_13 /* Q_R2 End of Frame */
+#define IS_R2_C BIT_12 /* Q_R2 Encoding Error */
+/* Synchronous Transmit Queue 1 */
+#define IS_XS1_B BIT_11 /* Q_XS1 End of Buffer */
+#define IS_XS1_F BIT_10 /* Q_XS1 End of Frame */
+#define IS_XS1_C BIT_9 /* Q_XS1 Encoding Error */
+/* Asynchronous Transmit Queue 1 */
+#define IS_XA1_B BIT_8 /* Q_XA1 End of Buffer */
+#define IS_XA1_F BIT_7 /* Q_XA1 End of Frame */
+#define IS_XA1_C BIT_6 /* Q_XA1 Encoding Error */
+/* Synchronous Transmit Queue 2 */
+#define IS_XS2_B BIT_5 /* Q_XS2 End of Buffer */
+#define IS_XS2_F BIT_4 /* Q_XS2 End of Frame */
+#define IS_XS2_C BIT_3 /* Q_XS2 Encoding Error */
+/* Asynchronous Transmit Queue 2 */
+#define IS_XA2_B BIT_2 /* Q_XA2 End of Buffer */
+#define IS_XA2_F BIT_1 /* Q_XA2 End of Frame */
+#define IS_XA2_C BIT_0 /* Q_XA2 Encoding Error */
+
+
+/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */
+/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */
+/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */
+#define IS_ERR_MSK 0x00000fffL /* All Error bits */
+ /* Bit 31..14: reserved */
+#define IS_IRQ_TIST_OV BIT_13 /* Time Stamp Timer Overflow (YUKON only) */
+#define IS_IRQ_SENSOR BIT_12 /* IRQ from Sensor (YUKON only) */
+#define IS_IRQ_MST_ERR BIT_11 /* IRQ master error detected */
+#define IS_IRQ_STAT BIT_10 /* IRQ status exception */
+#define IS_NO_STAT_M1 BIT_9 /* No Rx Status from MAC 1 */
+#define IS_NO_STAT_M2 BIT_8 /* No Rx Status from MAC 2 */
+#define IS_NO_TIST_M1 BIT_7 /* No Time Stamp from MAC 1 */
+#define IS_NO_TIST_M2 BIT_6 /* No Time Stamp from MAC 2 */
+#define IS_RAM_RD_PAR BIT_5 /* RAM Read Parity Error */
+#define IS_RAM_WR_PAR BIT_4 /* RAM Write Parity Error */
+#define IS_M1_PAR_ERR BIT_3 /* MAC 1 Parity Error */
+#define IS_M2_PAR_ERR BIT_2 /* MAC 2 Parity Error */
+#define IS_R1_PAR_ERR BIT_1 /* Queue R1 Parity Error */
+#define IS_R2_PAR_ERR BIT_0 /* Queue R2 Parity Error */
+
+/* B2_CONN_TYP 8 bit Connector type */
+/* B2_PMD_TYP 8 bit PMD type */
+/* Values of connector and PMD type comply to SysKonnect internal std */
+
+/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */
+#define CFG_CHIP_R_MSK (0xf<<4) /* Bit 7.. 4: Chip Revision */
+ /* Bit 3.. 2: reserved */
+#define CFG_DIS_M2_CLK BIT_1S /* Disable Clock for 2nd MAC */
+#define CFG_SNG_MAC BIT_0S /* MAC Config: 0=2 MACs / 1=1 MAC*/
+
+/* B2_CHIP_ID 8 bit Chip Identification Number */
+#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */
+#define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */
+
+/* B2_FAR 32 bit Flash-Prom Addr Reg/Cnt */
+#define FAR_ADDR 0x1ffffL /* Bit 16.. 0: FPROM Address mask */
+
+/* B2_LD_CRTL 8 bit EPROM loader control register */
+/* Bits are currently reserved */
+
+/* B2_LD_TEST 8 bit EPROM loader test register */
+ /* Bit 7.. 4: reserved */
+#define LD_T_ON BIT_3S /* Loader Test mode on */
+#define LD_T_OFF BIT_2S /* Loader Test mode off */
+#define LD_T_STEP BIT_1S /* Decrement FPROM addr. Counter */
+#define LD_START BIT_0S /* Start loading FPROM */
+
+/*
+ * Timer Section
+ */
+/* B2_TI_CRTL 8 bit Timer control */
+/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */
+ /* Bit 7.. 3: reserved */
+#define TIM_START BIT_2S /* Start Timer */
+#define TIM_STOP BIT_1S /* Stop Timer */
+#define TIM_CLR_IRQ BIT_0S /* Clear Timer IRQ (!IRQM) */
+
+/* B2_TI_TEST 8 Bit Timer Test */
+/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */
+/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */
+ /* Bit 7.. 3: reserved */
+#define TIM_T_ON BIT_2S /* Test mode on */
+#define TIM_T_OFF BIT_1S /* Test mode off */
+#define TIM_T_STEP BIT_0S /* Test step */
+
+/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */
+/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */
+ /* Bit 31..24: reserved */
+#define DPT_MSK 0x00ffffffL /* Bit 23.. 0: Desc Poll Timer Bits */
+
+/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */
+ /* Bit 7.. 2: reserved */
+#define DPT_START BIT_1S /* Start Descriptor Poll Timer */
+#define DPT_STOP BIT_0S /* Stop Descriptor Poll Timer */
+
+/* B2_E_3 8 bit lower 4 bits used for HW self test result */
+#define B2_E3_RES_MASK 0x0f
+
+/* B2_TST_CTRL1 8 bit Test Control Register 1 */
+#define TST_FRC_DPERR_MR BIT_7S /* force DATAPERR on MST RD */
+#define TST_FRC_DPERR_MW BIT_6S /* force DATAPERR on MST WR */
+#define TST_FRC_DPERR_TR BIT_5S /* force DATAPERR on TRG RD */
+#define TST_FRC_DPERR_TW BIT_4S /* force DATAPERR on TRG WR */
+#define TST_FRC_APERR_M BIT_3S /* force ADDRPERR on MST */
+#define TST_FRC_APERR_T BIT_2S /* force ADDRPERR on TRG */
+#define TST_CFG_WRITE_ON BIT_1S /* Enable Config Reg WR */
+#define TST_CFG_WRITE_OFF BIT_0S /* Disable Config Reg WR */
+
+/* B2_TST_CTRL2 8 bit Test Control Register 2 */
+ /* Bit 7.. 4: reserved */
+ /* force the following error on the next master read/write */
+#define TST_FRC_DPERR_MR64 BIT_3S /* DataPERR RD 64 */
+#define TST_FRC_DPERR_MW64 BIT_2S /* DataPERR WR 64 */
+#define TST_FRC_APERR_1M64 BIT_1S /* AddrPERR on 1. phase */
+#define TST_FRC_APERR_2M64 BIT_0S /* AddrPERR on 2. phase */
+
+/* B2_GP_IO 32 bit General Purpose I/O Register */
+ /* Bit 31..26: reserved */
+#define GP_DIR_9 BIT_25 /* IO_9 direct, 0=I/1=O */
+#define GP_DIR_8 BIT_24 /* IO_8 direct, 0=I/1=O */
+#define GP_DIR_7 BIT_23 /* IO_7 direct, 0=I/1=O */
+#define GP_DIR_6 BIT_22 /* IO_6 direct, 0=I/1=O */
+#define GP_DIR_5 BIT_21 /* IO_5 direct, 0=I/1=O */
+#define GP_DIR_4 BIT_20 /* IO_4 direct, 0=I/1=O */
+#define GP_DIR_3 BIT_19 /* IO_3 direct, 0=I/1=O */
+#define GP_DIR_2 BIT_18 /* IO_2 direct, 0=I/1=O */
+#define GP_DIR_1 BIT_17 /* IO_1 direct, 0=I/1=O */
+#define GP_DIR_0 BIT_16 /* IO_0 direct, 0=I/1=O */
+ /* Bit 15..10: reserved */
+#define GP_IO_9 BIT_9 /* IO_9 pin */
+#define GP_IO_8 BIT_8 /* IO_8 pin */
+#define GP_IO_7 BIT_7 /* IO_7 pin */
+#define GP_IO_6 BIT_6 /* IO_6 pin */
+#define GP_IO_5 BIT_5 /* IO_5 pin */
+#define GP_IO_4 BIT_4 /* IO_4 pin */
+#define GP_IO_3 BIT_3 /* IO_3 pin */
+#define GP_IO_2 BIT_2 /* IO_2 pin */
+#define GP_IO_1 BIT_1 /* IO_1 pin */
+#define GP_IO_0 BIT_0 /* IO_0 pin */
+
+/* B2_I2C_CTRL 32 bit I2C HW Control Register */
+#define I2C_FLAG BIT_31 /* Start read/write if WR */
+#define I2C_ADDR (0x7fffL<<16) /* Bit 30..16: Addr to be RD/WR */
+#define I2C_DEV_SEL (0x7fL<<9) /* Bit 15.. 9: I2C Device Select */
+ /* Bit 8.. 5: reserved */
+#define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */
+#define I2C_DEV_SIZE (7L<<1) /* Bit 3.. 1: I2C Device Size */
+#define I2C_025K_DEV (0L<<1) /* 0: 256 Bytes or smal. */
+#define I2C_05K_DEV (1L<<1) /* 1: 512 Bytes */
+#define I2C_1K_DEV (2L<<1) /* 2: 1024 Bytes */
+#define I2C_2K_DEV (3L<<1) /* 3: 2048 Bytes */
+#define I2C_4K_DEV (4L<<1) /* 4: 4096 Bytes */
+#define I2C_8K_DEV (5L<<1) /* 5: 8192 Bytes */
+#define I2C_16K_DEV (6L<<1) /* 6: 16384 Bytes */
+#define I2C_32K_DEV (7L<<1) /* 7: 32768 Bytes */
+#define I2C_STOP BIT_0 /* Interrupt I2C transfer */
+
+/* B2_I2C_IRQ 32 bit I2C HW IRQ Register */
+ /* Bit 31.. 1 reserved */
+#define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */
+
+/* B2_I2C_SW 32 bit (8 bit access) I2C HW SW Port Register */
+ /* Bit 7.. 3: reserved */
+#define I2C_DATA_DIR BIT_2S /* direction of I2C_DATA */
+#define I2C_DATA BIT_1S /* I2C Data Port */
+#define I2C_CLK BIT_0S /* I2C Clock Port */
+
+/*
+ * I2C Address
+ */
+#define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address, (Volt and Temp)*/
+
+
+/* B2_BSC_CTRL 8 bit Blink Source Counter Control */
+ /* Bit 7.. 2: reserved */
+#define BSC_START BIT_1S /* Start Blink Source Counter */
+#define BSC_STOP BIT_0S /* Stop Blink Source Counter */
+
+/* B2_BSC_STAT 8 bit Blink Source Counter Status */
+ /* Bit 7.. 1: reserved */
+#define BSC_SRC BIT_0S /* Blink Source, 0=Off / 1=On */
+
+/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */
+#define BSC_T_ON BIT_2S /* Test mode on */
+#define BSC_T_OFF BIT_1S /* Test mode off */
+#define BSC_T_STEP BIT_0S /* Test step */
+
+
+/* B3_RAM_ADDR 32 bit RAM Address, to read or write */
+ /* Bit 31..19: reserved */
+#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */
+
+/* RAM Interface Registers */
+/* B3_RI_CTRL 16 bit RAM Iface Control Register */
+ /* Bit 15..10: reserved */
+#define RI_CLR_RD_PERR BIT_9S /* Clear IRQ RAM Read Parity Err */
+#define RI_CLR_WR_PERR BIT_8S /* Clear IRQ RAM Write Parity Err*/
+ /* Bit 7.. 2: reserved */
+#define RI_RST_CLR BIT_1S /* Clear RAM Interface Reset */
+#define RI_RST_SET BIT_0S /* Set RAM Interface Reset */
+
+/* B3_RI_TEST 8 bit RAM Iface Test Register */
+ /* Bit 15.. 4: reserved */
+#define RI_T_EV BIT_3S /* Timeout Event occured */
+#define RI_T_ON BIT_2S /* Timeout Timer Test On */
+#define RI_T_OFF BIT_1S /* Timeout Timer Test Off */
+#define RI_T_STEP BIT_0S /* Timeout Timer Step */
+
+/* MAC Arbiter Registers */
+/* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */
+ /* Bit 15.. 4: reserved */
+#define MA_FOE_ON BIT_3S /* XMAC Fast Output Enable ON */
+#define MA_FOE_OFF BIT_2S /* XMAC Fast Output Enable OFF */
+#define MA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */
+#define MA_RST_SET BIT_0S /* Set MAC Arbiter Reset */
+
+/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */
+ /* Bit 15.. 8: reserved */
+#define MA_ENA_REC_TX2 BIT_7S /* Enable Recovery Timer TX2 */
+#define MA_DIS_REC_TX2 BIT_6S /* Disable Recovery Timer TX2 */
+#define MA_ENA_REC_TX1 BIT_5S /* Enable Recovery Timer TX1 */
+#define MA_DIS_REC_TX1 BIT_4S /* Disable Recovery Timer TX1 */
+#define MA_ENA_REC_RX2 BIT_3S /* Enable Recovery Timer RX2 */
+#define MA_DIS_REC_RX2 BIT_2S /* Disable Recovery Timer RX2 */
+#define MA_ENA_REC_RX1 BIT_1S /* Enable Recovery Timer RX1 */
+#define MA_DIS_REC_RX1 BIT_0S /* Disable Recovery Timer RX1 */
+
+/* Packet Arbiter Registers */
+/* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */
+ /* Bit 15..14: reserved */
+#define PA_CLR_TO_TX2 BIT_13S /* Clear IRQ Packet Timeout TX2 */
+#define PA_CLR_TO_TX1 BIT_12S /* Clear IRQ Packet Timeout TX1 */
+#define PA_CLR_TO_RX2 BIT_11S /* Clear IRQ Packet Timeout RX2 */
+#define PA_CLR_TO_RX1 BIT_10S /* Clear IRQ Packet Timeout RX1 */
+#define PA_ENA_TO_TX2 BIT_9S /* Enable Timeout Timer TX2 */
+#define PA_DIS_TO_TX2 BIT_8S /* Disable Timeout Timer TX2 */
+#define PA_ENA_TO_TX1 BIT_7S /* Enable Timeout Timer TX1 */
+#define PA_DIS_TO_TX1 BIT_6S /* Disable Timeout Timer TX1 */
+#define PA_ENA_TO_RX2 BIT_5S /* Enable Timeout Timer RX2 */
+#define PA_DIS_TO_RX2 BIT_4S /* Disable Timeout Timer RX2 */
+#define PA_ENA_TO_RX1 BIT_3S /* Enable Timeout Timer RX1 */
+#define PA_DIS_TO_RX1 BIT_2S /* Disable Timeout Timer RX1 */
+#define PA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */
+#define PA_RST_SET BIT_0S /* Set MAC Arbiter Reset */
+
+#define PA_ENA_TO_ALL (PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\
+ PA_ENA_TO_TX1 | PA_ENA_TO_TX2)
+
+/* Rx/Tx Path related Arbiter Test Registers */
+/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */
+/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */
+/* B3_PA_TEST 16 bit Packet Arbiter Test Register */
+/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */
+#define TX2_T_EV BIT_15S /* TX2 Timeout/Recv Event occured */
+#define TX2_T_ON BIT_14S /* TX2 Timeout/Recv Timer Test On */
+#define TX2_T_OFF BIT_13S /* TX2 Timeout/Recv Timer Tst Off */
+#define TX2_T_STEP BIT_12S /* TX2 Timeout/Recv Timer Step */
+#define TX1_T_EV BIT_11S /* TX1 Timeout/Recv Event occured */
+#define TX1_T_ON BIT_10S /* TX1 Timeout/Recv Timer Test On */
+#define TX1_T_OFF BIT_9S /* TX1 Timeout/Recv Timer Tst Off */
+#define TX1_T_STEP BIT_8S /* TX1 Timeout/Recv Timer Step */
+#define RX2_T_EV BIT_7S /* RX2 Timeout/Recv Event occured */
+#define RX2_T_ON BIT_6S /* RX2 Timeout/Recv Timer Test On */
+#define RX2_T_OFF BIT_5S /* RX2 Timeout/Recv Timer Tst Off */
+#define RX2_T_STEP BIT_4S /* RX2 Timeout/Recv Timer Step */
+#define RX1_T_EV BIT_3S /* RX1 Timeout/Recv Event occured */
+#define RX1_T_ON BIT_2S /* RX1 Timeout/Recv Timer Test On */
+#define RX1_T_OFF BIT_1S /* RX1 Timeout/Recv Timer Tst Off */
+#define RX1_T_STEP BIT_0S /* RX1 Timeout/Recv Timer Step */
+
+
+/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
+/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */
+/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */
+/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */
+/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */
+ /* Bit 31..24: reserved */
+#define TXA_MAX_VAL 0x00ffffffL /* Bit 23.. 0: Max TXA Timer/Cnt Val */
+
+/* TXA_CTRL 8 bit Tx Arbiter Control Register */
+#define TXA_ENA_FSYNC BIT_7S /* Enable force of sync Tx queue */
+#define TXA_DIS_FSYNC BIT_6S /* Disable force of sync Tx queue */
+#define TXA_ENA_ALLOC BIT_5S /* Enable alloc of free bandwidth */
+#define TXA_DIS_ALLOC BIT_4S /* Disable alloc of free bandwidth */
+#define TXA_START_RC BIT_3S /* Start sync Rate Control */
+#define TXA_STOP_RC BIT_2S /* Stop sync Rate Control */
+#define TXA_ENA_ARB BIT_1S /* Enable Tx Arbiter */
+#define TXA_DIS_ARB BIT_0S /* Disable Tx Arbiter */
+
+/* TXA_TEST 8 bit Tx Arbiter Test Register */
+ /* Bit 7.. 6: reserved */
+#define TXA_INT_T_ON BIT_5S /* Tx Arb Interval Timer Test On */
+#define TXA_INT_T_OFF BIT_4S /* Tx Arb Interval Timer Test Off */
+#define TXA_INT_T_STEP BIT_3S /* Tx Arb Interval Timer Step */
+#define TXA_LIM_T_ON BIT_2S /* Tx Arb Limit Timer Test On */
+#define TXA_LIM_T_OFF BIT_1S /* Tx Arb Limit Timer Test Off */
+#define TXA_LIM_T_STEP BIT_0S /* Tx Arb Limit Timer Step */
+
+/* TXA_STAT 8 bit Tx Arbiter Status Register */
+ /* Bit 7.. 1: reserved */
+#define TXA_PRIO_XS BIT_0S /* sync queue has prio to send */
+
+/* Q_BC 32 bit Current Byte Counter */
+ /* Bit 31..16: reserved */
+#define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */
+
+/* BMU Control Status Registers */
+/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */
+/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */
+/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */
+/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */
+/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */
+/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */
+/* Q_CSR 32 bit BMU Control/Status Register */
+ /* Bit 31..25: reserved */
+#define CSR_SV_IDLE BIT_24 /* BMU SM Idle */
+ /* Bit 23..22: reserved */
+#define CSR_DESC_CLR BIT_21 /* Clear Reset for Descr */
+#define CSR_DESC_SET BIT_20 /* Set Reset for Descr */
+#define CSR_FIFO_CLR BIT_19 /* Clear Reset for FIFO */
+#define CSR_FIFO_SET BIT_18 /* Set Reset for FIFO */
+#define CSR_HPI_RUN BIT_17 /* Release HPI SM */
+#define CSR_HPI_RST BIT_16 /* Reset HPI SM to Idle */
+#define CSR_SV_RUN BIT_15 /* Release Supervisor SM */
+#define CSR_SV_RST BIT_14 /* Reset Supervisor SM */
+#define CSR_DREAD_RUN BIT_13 /* Release Descr Read SM */
+#define CSR_DREAD_RST BIT_12 /* Reset Descr Read SM */
+#define CSR_DWRITE_RUN BIT_11 /* Release Descr Write SM */
+#define CSR_DWRITE_RST BIT_10 /* Reset Descr Write SM */
+#define CSR_TRANS_RUN BIT_9 /* Release Transfer SM */
+#define CSR_TRANS_RST BIT_8 /* Reset Transfer SM */
+#define CSR_ENA_POL BIT_7 /* Enable Descr Polling */
+#define CSR_DIS_POL BIT_6 /* Disable Descr Polling */
+#define CSR_STOP BIT_5 /* Stop Rx/Tx Queue */
+#define CSR_START BIT_4 /* Start Rx/Tx Queue */
+#define CSR_IRQ_CL_P BIT_3 /* (Rx) Clear Parity IRQ */
+#define CSR_IRQ_CL_B BIT_2 /* Clear EOB IRQ */
+#define CSR_IRQ_CL_F BIT_1 /* Clear EOF IRQ */
+#define CSR_IRQ_CL_C BIT_0 /* Clear ERR IRQ */
+
+#define CSR_SET_RESET (CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\
+ CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\
+ CSR_TRANS_RST)
+#define CSR_CLR_RESET (CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\
+ CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\
+ CSR_TRANS_RUN)
+
+/* Q_F 32 bit Flag Register */
+ /* Bit 31..28: reserved */
+#define F_ALM_FULL BIT_27 /* Rx FIFO: almost full */
+#define F_EMPTY BIT_27 /* Tx FIFO: empty flag */
+#define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */
+#define F_WM_REACHED BIT_25 /* Watermark reached */
+ /* reserved */
+#define F_FIFO_LEVEL (0x1fL<<16) /* Bit 23..16: # of Qwords in FIFO */
+ /* Bit 15..11: reserved */
+#define F_WATER_MARK 0x0007ffL /* Bit 10.. 0: Watermark */
+
+/* Q_T1 32 bit Test Register 1 */
+/* Holds four State Machine control Bytes */
+#define SM_CRTL_SV_MSK (0xffL<<24) /* Bit 31..24: Control Supervisor SM */
+#define SM_CRTL_RD_MSK (0xffL<<16) /* Bit 23..16: Control Read Desc SM */
+#define SM_CRTL_WR_MSK (0xffL<<8) /* Bit 15.. 8: Control Write Desc SM */
+#define SM_CRTL_TR_MSK 0xffL /* Bit 7.. 0: Control Transfer SM */
+
+/* Q_T1_TR 8 bit Test Register 1 Transfer SM */
+/* Q_T1_WR 8 bit Test Register 1 Write Descriptor SM */
+/* Q_T1_RD 8 bit Test Register 1 Read Descriptor SM */
+/* Q_T1_SV 8 bit Test Register 1 Supervisor SM */
+
+/* The control status byte of each machine looks like ... */
+#define SM_STATE 0xf0 /* Bit 7.. 4: State which shall be loaded */
+#define SM_LOAD BIT_3S /* Load the SM with SM_STATE */
+#define SM_TEST_ON BIT_2S /* Switch on SM Test Mode */
+#define SM_TEST_OFF BIT_1S /* Go off the Test Mode */
+#define SM_STEP BIT_0S /* Step the State Machine */
+/* The encoding of the states is not supported by the Diagnostics Tool */
+
+/* Q_T2 32 bit Test Register 2 */
+ /* Bit 31.. 8: reserved */
+#define T2_AC_T_ON BIT_7 /* Address Counter Test Mode on */
+#define T2_AC_T_OFF BIT_6 /* Address Counter Test Mode off */
+#define T2_BC_T_ON BIT_5 /* Byte Counter Test Mode on */
+#define T2_BC_T_OFF BIT_4 /* Byte Counter Test Mode off */
+#define T2_STEP04 BIT_3 /* Inc AC/Dec BC by 4 */
+#define T2_STEP03 BIT_2 /* Inc AC/Dec BC by 3 */
+#define T2_STEP02 BIT_1 /* Inc AC/Dec BC by 2 */
+#define T2_STEP01 BIT_0 /* Inc AC/Dec BC by 1 */
+
+/* Q_T3 32 bit Test Register 3 */
+ /* Bit 31.. 7: reserved */
+#define T3_MUX_MSK (7<<4) /* Bit 6.. 4: Mux Position */
+ /* Bit 3: reserved */
+#define T3_VRAM_MSK 7 /* Bit 2.. 0: Virtual RAM Buffer Address */
+
+/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */
+/* RB_START 32 bit RAM Buffer Start Address */
+/* RB_END 32 bit RAM Buffer End Address */
+/* RB_WP 32 bit RAM Buffer Write Pointer */
+/* RB_RP 32 bit RAM Buffer Read Pointer */
+/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */
+/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */
+/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */
+/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */
+/* RB_PC 32 bit RAM Buffer Packet Counter */
+/* RB_LEV 32 bit RAM Buffer Level Register */
+ /* Bit 31..19: reserved */
+#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */
+
+/* RB_TST2 8 bit RAM Buffer Test Register 2 */
+ /* Bit 7.. 4: reserved */
+#define RB_PC_DEC BIT_3S /* Packet Counter Decrem */
+#define RB_PC_T_ON BIT_2S /* Packet Counter Test On */
+#define RB_PC_T_OFF BIT_1S /* Packet Counter Tst Off */
+#define RB_PC_INC BIT_0S /* Packet Counter Increm */
+
+/* RB_TST1 8 bit RAM Buffer Test Register 1 */
+ /* Bit 7: reserved */
+#define RB_WP_T_ON BIT_6S /* Write Pointer Test On */
+#define RB_WP_T_OFF BIT_5S /* Write Pointer Test Off */
+#define RB_WP_INC BIT_4S /* Write Pointer Increm */
+ /* Bit 3: reserved */
+#define RB_RP_T_ON BIT_2S /* Read Pointer Test On */
+#define RB_RP_T_OFF BIT_1S /* Read Pointer Test Off */
+#define RB_RP_DEC BIT_0S /* Read Pointer Decrement */
+
+/* RB_CTRL 8 bit RAM Buffer Control Register */
+ /* Bit 7.. 6: reserved */
+#define RB_ENA_STFWD BIT_5S /* Enable Store & Forward */
+#define RB_DIS_STFWD BIT_4S /* Disable Store & Forward */
+#define RB_ENA_OP_MD BIT_3S /* Enable Operation Mode */
+#define RB_DIS_OP_MD BIT_2S /* Disable Operation Mode */
+#define RB_RST_CLR BIT_1S /* Clear RAM Buf STM Reset */
+#define RB_RST_SET BIT_0S /* Set RAM Buf STM Reset */
+
+
+/* Receive and Transmit MAC FIFO Registers (GENESIS only) */
+
+/* RX_MFF_EA 32 bit Receive MAC FIFO End Address */
+/* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */
+/* RX_MFF_RP 32 bit Receive MAC FIFO Read Pointer */
+/* RX_MFF_PC 32 bit Receive MAC FIFO Packet Counter */
+/* RX_MFF_LEV 32 bit Receive MAC FIFO Level */
+/* TX_MFF_EA 32 bit Transmit MAC FIFO End Address */
+/* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer */
+/* TX_MFF_WSP 32 bit Transmit MAC FIFO WR Shadow Pointer */
+/* TX_MFF_RP 32 bit Transmit MAC FIFO Read Pointer */
+/* TX_MFF_PC 32 bit Transmit MAC FIFO Packet Cnt */
+/* TX_MFF_LEV 32 bit Transmit MAC FIFO Level */
+ /* Bit 31.. 6: reserved */
+#define MFF_MSK 0x007fL /* Bit 5.. 0: MAC FIFO Address/Ptr Bits */
+
+/* RX_MFF_CTRL1 16 bit Receive MAC FIFO Control Reg 1 */
+ /* Bit 15..14: reserved */
+#define MFF_ENA_RDY_PAT BIT_13S /* Enable Ready Patch */
+#define MFF_DIS_RDY_PAT BIT_12S /* Disable Ready Patch */
+#define MFF_ENA_TIM_PAT BIT_11S /* Enable Timing Patch */
+#define MFF_DIS_TIM_PAT BIT_10S /* Disable Timing Patch */
+#define MFF_ENA_ALM_FUL BIT_9S /* Enable AlmostFull Sign */
+#define MFF_DIS_ALM_FUL BIT_8S /* Disable AlmostFull Sign */
+#define MFF_ENA_PAUSE BIT_7S /* Enable Pause Signaling */
+#define MFF_DIS_PAUSE BIT_6S /* Disable Pause Signaling */
+#define MFF_ENA_FLUSH BIT_5S /* Enable Frame Flushing */
+#define MFF_DIS_FLUSH BIT_4S /* Disable Frame Flushing */
+#define MFF_ENA_TIST BIT_3S /* Enable Time Stamp Gener */
+#define MFF_DIS_TIST BIT_2S /* Disable Time Stamp Gener */
+#define MFF_CLR_INTIST BIT_1S /* Clear IRQ No Time Stamp */
+#define MFF_CLR_INSTAT BIT_0S /* Clear IRQ No Status */
+
+#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT
+
+/* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */
+#define MFF_CLR_PERR BIT_15S /* Clear Parity Error IRQ */
+ /* Bit 14: reserved */
+#define MFF_ENA_PKT_REC BIT_13S /* Enable Packet Recovery */
+#define MFF_DIS_PKT_REC BIT_12S /* Disable Packet Recovery */
+/* MFF_ENA_TIM_PAT (see RX_MFF_CTRL1) Bit 11: Enable Timing Patch */
+/* MFF_DIS_TIM_PAT (see RX_MFF_CTRL1) Bit 10: Disable Timing Patch */
+/* MFF_ENA_ALM_FUL (see RX_MFF_CTRL1) Bit 9: Enable Almost Full Sign */
+/* MFF_DIS_ALM_FUL (see RX_MFF_CTRL1) Bit 8: Disable Almost Full Sign */
+#define MFF_ENA_W4E BIT_7S /* Enable Wait for Empty */
+#define MFF_DIS_W4E BIT_6S /* Disable Wait for Empty */
+/* MFF_ENA_FLUSH (see RX_MFF_CTRL1) Bit 5: Enable Frame Flushing */
+/* MFF_DIS_FLUSH (see RX_MFF_CTRL1) Bit 4: Disable Frame Flushing */
+#define MFF_ENA_LOOPB BIT_3S /* Enable Loopback */
+#define MFF_DIS_LOOPB BIT_2S /* Disable Loopback */
+#define MFF_CLR_MAC_RST BIT_1S /* Clear XMAC Reset */
+#define MFF_SET_MAC_RST BIT_0S /* Set XMAC Reset */
+
+#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH)
+
+/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */
+/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */
+ /* Bit 7: reserved */
+#define MFF_WSP_T_ON BIT_6S /* Tx: Write Shadow Ptr TestOn */
+#define MFF_WSP_T_OFF BIT_5S /* Tx: Write Shadow Ptr TstOff */
+#define MFF_WSP_INC BIT_4S /* Tx: Write Shadow Ptr Increment */
+#define MFF_PC_DEC BIT_3S /* Packet Counter Decrement */
+#define MFF_PC_T_ON BIT_2S /* Packet Counter Test On */
+#define MFF_PC_T_OFF BIT_1S /* Packet Counter Test Off */
+#define MFF_PC_INC BIT_0S /* Packet Counter Increment */
+
+/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */
+/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */
+ /* Bit 7: reserved */
+#define MFF_WP_T_ON BIT_6S /* Write Pointer Test On */
+#define MFF_WP_T_OFF BIT_5S /* Write Pointer Test Off */
+#define MFF_WP_INC BIT_4S /* Write Pointer Increm */
+ /* Bit 3: reserved */
+#define MFF_RP_T_ON BIT_2S /* Read Pointer Test On */
+#define MFF_RP_T_OFF BIT_1S /* Read Pointer Test Off */
+#define MFF_RP_DEC BIT_0S /* Read Pointer Decrement */
+
+/* RX_MFF_CTRL2 8 bit Receive MAC FIFO Control Reg 2 */
+/* TX_MFF_CTRL2 8 bit Transmit MAC FIFO Control Reg 2 */
+ /* Bit 7..4: reserved */
+#define MFF_ENA_OP_MD BIT_3S /* Enable Operation Mode */
+#define MFF_DIS_OP_MD BIT_2S /* Disable Operation Mode */
+#define MFF_RST_CLR BIT_1S /* Clear MAC FIFO Reset */
+#define MFF_RST_SET BIT_0S /* Set MAC FIFO Reset */
+
+
+/* Link LED Counter Registers (GENESIS only) */
+
+/* RX_LED_CTRL 8 bit Receive LED Cnt Control Reg */
+/* TX_LED_CTRL 8 bit Transmit LED Cnt Control Reg */
+/* LNK_SYNC_CTRL 8 bit Link Sync Cnt Control Register */
+ /* Bit 7.. 3: reserved */
+#define LED_START BIT_2S /* Start Timer */
+#define LED_STOP BIT_1S /* Stop Timer */
+#define LED_STATE BIT_0S /* Rx/Tx: LED State, 1=LED on */
+#define LED_CLR_IRQ BIT_0S /* Lnk: Clear Link IRQ */
+
+/* RX_LED_TST 8 bit Receive LED Cnt Test Register */
+/* TX_LED_TST 8 bit Transmit LED Cnt Test Register */
+/* LNK_SYNC_TST 8 bit Link Sync Cnt Test Register */
+ /* Bit 7.. 3: reserved */
+#define LED_T_ON BIT_2S /* LED Counter Test mode On */
+#define LED_T_OFF BIT_1S /* LED Counter Test mode Off */
+#define LED_T_STEP BIT_0S /* LED Counter Step */
+
+/* LNK_LED_REG 8 bit Link LED Register */
+ /* Bit 7.. 6: reserved */
+#define LED_BLK_ON BIT_5S /* Link LED Blinking On */
+#define LED_BLK_OFF BIT_4S /* Link LED Blinking Off */
+#define LED_SYNC_ON BIT_3S /* Use Sync Wire to switch LED */
+#define LED_SYNC_OFF BIT_2S /* Disable Sync Wire Input */
+#define LED_ON BIT_1S /* switch LED on */
+#define LED_OFF BIT_0S /* switch LED off */
+
+/* Receive and Transmit GMAC FIFO Registers (YUKON only) */
+
+/* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */
+/* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */
+/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */
+/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */
+/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */
+/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */
+/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */
+/* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
+/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */
+/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Ptr. */
+/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */
+/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */
+/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */
+/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */
+
+/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */
+ /* Bits 31..15: reserved */
+#define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */
+#define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */
+#define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */
+ /* Bit 11: reserved */
+#define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */
+#define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */
+#define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */
+#define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */
+#define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */
+#define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */
+#define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */
+#define GMF_OPER_ON BIT_3 /* Operational Mode On */
+#define GMF_OPER_OFF BIT_2 /* Operational Mode Off */
+#define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */
+#define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */
+
+/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */
+ /* Bits 31..19: reserved */
+#define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */
+#define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */
+#define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */
+ /* Bits 15..7: same as for RX_GMF_CTRL_T */
+#define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */
+#define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */
+#define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */
+ /* Bits 3..0: same as for RX_GMF_CTRL_T */
+
+#define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON)
+#define GMF_TX_CTRL_DEF GMF_OPER_ON
+
+#define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */
+
+/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */
+ /* Bit 7.. 3: reserved */
+#define GMT_ST_START BIT_2S /* Start Time Stamp Timer */
+#define GMT_ST_STOP BIT_1S /* Stop Time Stamp Timer */
+#define GMT_ST_CLR_IRQ BIT_0S /* Clear Time Stamp Timer IRQ */
+
+/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */
+ /* Bits 31.. 8: reserved */
+#define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */
+#define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */
+#define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */
+#define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */
+#define GMC_PAUSE_ON BIT_3 /* Pause On */
+#define GMC_PAUSE_OFF BIT_2 /* Pause Off */
+#define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */
+#define GMC_RST_SET BIT_0 /* Set GMAC Reset */
+
+/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */
+ /* Bits 31..29: reserved */
+#define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */
+#define GPC_INT_POL_HI BIT_27 /* IRQ Polarity is Active HIGH */
+#define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */
+#define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */
+#define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */
+#define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */
+#define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */
+#define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */
+#define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */
+#define GPC_ANEG_0 BIT_19 /* ANEG[0] */
+#define GPC_ENA_XC BIT_18 /* Enable MDI crossover */
+#define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */
+#define GPC_ANEG_3 BIT_16 /* ANEG[3] */
+#define GPC_ANEG_2 BIT_15 /* ANEG[2] */
+#define GPC_ANEG_1 BIT_14 /* ANEG[1] */
+#define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */
+#define GPC_PHYADDR_4 BIT_12 /* Bit 4 of Phy Addr */
+#define GPC_PHYADDR_3 BIT_11 /* Bit 3 of Phy Addr */
+#define GPC_PHYADDR_2 BIT_10 /* Bit 2 of Phy Addr */
+#define GPC_PHYADDR_1 BIT_9 /* Bit 1 of Phy Addr */
+#define GPC_PHYADDR_0 BIT_8 /* Bit 0 of Phy Addr */
+ /* Bits 7..2: reserved */
+#define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */
+#define GPC_RST_SET BIT_0 /* Set GPHY Reset */
+
+#define GPC_HWCFG_GMII_COP (GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | \
+ GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
+
+#define GPC_HWCFG_GMII_FIB ( GPC_HWCFG_M_2 | \
+ GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
+
+#define GPC_ANEG_ADV_ALL_M (GPC_ANEG_3 | GPC_ANEG_2 | \
+ GPC_ANEG_1 | GPC_ANEG_0)
+
+/* forced speed and duplex mode (don't mix with other ANEG bits) */
+#define GPC_FRC10MBIT_HALF 0
+#define GPC_FRC10MBIT_FULL GPC_ANEG_0
+#define GPC_FRC100MBIT_HALF GPC_ANEG_1
+#define GPC_FRC100MBIT_FULL (GPC_ANEG_0 | GPC_ANEG_1)
+
+/* auto-negotiation with limited advertised speeds */
+/* mix only with master/slave settings (for copper) */
+#define GPC_ADV_1000_HALF GPC_ANEG_2
+#define GPC_ADV_1000_FULL GPC_ANEG_3
+#define GPC_ADV_ALL (GPC_ANEG_2 | GPC_ANEG_3)
+
+/* master/slave settings */
+/* only for copper with 1000 Mbps */
+#define GPC_FORCE_MASTER 0
+#define GPC_FORCE_SLAVE GPC_ANEG_0
+#define GPC_PREF_MASTER GPC_ANEG_1
+#define GPC_PREF_SLAVE (GPC_ANEG_1 | GPC_ANEG_0)
+
+/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */
+/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */
+#define GM_IS_TX_CO_OV BIT_5 /* Transmit Counter Overflow IRQ */
+#define GM_IS_RX_CO_OV BIT_4 /* Receive Counter Overflow IRQ */
+#define GM_IS_TX_FF_UR BIT_3 /* Transmit FIFO Underrun */
+#define GM_IS_TX_COMPL BIT_2 /* Frame Transmission Complete */
+#define GM_IS_RX_FF_OR BIT_1 /* Receive FIFO Overrun */
+#define GM_IS_RX_COMPL BIT_0 /* Frame Reception Complete */
+
+#define GMAC_DEF_MSK (GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | \
+ GM_IS_TX_FF_UR)
+
+/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */
+ /* Bits 15.. 2: reserved */
+#define GMLC_RST_CLR BIT_1S /* Clear GMAC Link Reset */
+#define GMLC_RST_SET BIT_0S /* Set GMAC Link Reset */
+
+
+/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */
+#define WOL_CTL_LINK_CHG_OCC BIT_15S
+#define WOL_CTL_MAGIC_PKT_OCC BIT_14S
+#define WOL_CTL_PATTERN_OCC BIT_13S
+
+#define WOL_CTL_CLEAR_RESULT BIT_12S
+
+#define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11S
+#define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10S
+#define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9S
+#define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8S
+#define WOL_CTL_ENA_PME_ON_PATTERN BIT_7S
+#define WOL_CTL_DIS_PME_ON_PATTERN BIT_6S
+
+#define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5S
+#define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4S
+#define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3S
+#define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2S
+#define WOL_CTL_ENA_PATTERN_UNIT BIT_1S
+#define WOL_CTL_DIS_PATTERN_UNIT BIT_0S
+
+#define WOL_CTL_DEFAULT \
+ (WOL_CTL_DIS_PME_ON_LINK_CHG | \
+ WOL_CTL_DIS_PME_ON_PATTERN | \
+ WOL_CTL_DIS_PME_ON_MAGIC_PKT | \
+ WOL_CTL_DIS_LINK_CHG_UNIT | \
+ WOL_CTL_DIS_PATTERN_UNIT | \
+ WOL_CTL_DIS_MAGIC_PKT_UNIT)
+
+/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */
+#define WOL_CTL_PATT_ENA(x) (BIT_0 << (x))
+
+#define SK_NUM_WOL_PATTERN 7
+#define SK_PATTERN_PER_WORD 4
+#define SK_BITMASK_PATTERN 7
+#define SK_POW_PATTERN_LENGTH 128
+
+#define WOL_LENGTH_MSK 0x7f
+#define WOL_LENGTH_SHIFT 8
+
+
+/* Receive and Transmit Descriptors ******************************************/
+
+/* Transmit Descriptor struct */
+typedef struct s_HwTxd {
+ SK_U32 volatile TxCtrl; /* Transmit Buffer Control Field */
+ SK_U32 TxNext; /* Physical Address Pointer to the next TxD */
+ SK_U32 TxAdrLo; /* Physical Tx Buffer Address lower dword */
+ SK_U32 TxAdrHi; /* Physical Tx Buffer Address upper dword */
+ SK_U32 TxStat; /* Transmit Frame Status Word */
+#ifndef SK_USE_REV_DESC
+ SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */
+ SK_U16 TxRes1; /* 16 bit reserved field */
+ SK_U16 TxTcpWp; /* TCP Checksum Write Position */
+ SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */
+#else /* SK_USE_REV_DESC */
+ SK_U16 TxRes1; /* 16 bit reserved field */
+ SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */
+ SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */
+ SK_U16 TxTcpWp; /* TCP Checksum Write Position */
+#endif /* SK_USE_REV_DESC */
+ SK_U32 TxRes2; /* 32 bit reserved field */
+} SK_HWTXD;
+
+/* Receive Descriptor struct */
+typedef struct s_HwRxd {
+ SK_U32 volatile RxCtrl; /* Receive Buffer Control Field */
+ SK_U32 RxNext; /* Physical Address Pointer to the next RxD */
+ SK_U32 RxAdrLo; /* Physical Rx Buffer Address lower dword */
+ SK_U32 RxAdrHi; /* Physical Rx Buffer Address upper dword */
+ SK_U32 RxStat; /* Receive Frame Status Word */
+ SK_U32 RxTiSt; /* Receive Time Stamp (from XMAC on GENESIS) */
+#ifndef SK_USE_REV_DESC
+ SK_U16 RxTcpSum1; /* TCP Checksum 1 */
+ SK_U16 RxTcpSum2; /* TCP Checksum 2 */
+ SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */
+ SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */
+#else /* SK_USE_REV_DESC */
+ SK_U16 RxTcpSum2; /* TCP Checksum 2 */
+ SK_U16 RxTcpSum1; /* TCP Checksum 1 */
+ SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */
+ SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */
+#endif /* SK_USE_REV_DESC */
+} SK_HWRXD;
+
+/*
+ * Drivers which use the reverse descriptor feature (PCI_OUR_REG_2)
+ * should set the define SK_USE_REV_DESC.
+ * Structures are 'normaly' not endianess dependent. But in
+ * this case the SK_U16 fields are bound to bit positions inside the
+ * descriptor. RxTcpSum1 e.g. must start at bit 0 within the 6.th DWord.
+ * The bit positions inside a DWord are of course endianess dependent and
+ * swaps if the DWord is swapped by the hardware.
+ */
+
+
+/* Descriptor Bit Definition */
+/* TxCtrl Transmit Buffer Control Field */
+/* RxCtrl Receive Buffer Control Field */
+#define BMU_OWN BIT_31 /* OWN bit: 0=host/1=BMU */
+#define BMU_STF BIT_30 /* Start of Frame */
+#define BMU_EOF BIT_29 /* End of Frame */
+#define BMU_IRQ_EOB BIT_28 /* Req "End of Buffer" IRQ */
+#define BMU_IRQ_EOF BIT_27 /* Req "End of Frame" IRQ */
+/* TxCtrl specific bits */
+#define BMU_STFWD BIT_26 /* (Tx) Store & Forward Frame */
+#define BMU_NO_FCS BIT_25 /* (Tx) Disable MAC FCS (CRC) generation */
+#define BMU_SW BIT_24 /* (Tx) 1 bit res. for SW use */
+/* RxCtrl specific bits */
+#define BMU_DEV_0 BIT_26 /* (Rx) Transfer data to Dev0 */
+#define BMU_STAT_VAL BIT_25 /* (Rx) Rx Status Valid */
+#define BMU_TIST_VAL BIT_24 /* (Rx) Rx TimeStamp Valid */
+ /* Bit 23..16: BMU Check Opcodes */
+#define BMU_CHECK (0x55L<<16) /* Default BMU check */
+#define BMU_TCP_CHECK (0x56L<<16) /* Descr with TCP ext */
+#define BMU_UDP_CHECK (0x57L<<16) /* Descr with UDP ext (YUKON only) */
+#define BMU_BBC 0xFFFFL /* Bit 15.. 0: Buffer Byte Counter */
+
+/* TxStat Transmit Frame Status Word */
+/* RxStat Receive Frame Status Word */
+/*
+ *Note: TxStat is reserved for ASIC loopback mode only
+ *
+ * The Bits of the Status words are defined in xmac_ii.h
+ * (see XMR_FS bits)
+ */
+
+/* other defines *************************************************************/
+
+/*
+ * FlashProm specification
+ */
+#define MAX_PAGES 0x20000L /* Every byte has a single page */
+#define MAX_FADDR 1 /* 1 byte per page */
+#define SKFDDI_PSZ 8 /* address PROM size */
+
+/* macros ********************************************************************/
+
+/*
+ * Receive and Transmit Queues
+ */
+#define Q_R1 0x0000 /* Receive Queue 1 */
+#define Q_R2 0x0080 /* Receive Queue 2 */
+#define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */
+#define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */
+#define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */
+#define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */
+
+/*
+ * Macro Q_ADDR()
+ *
+ * Use this macro to access the Receive and Transmit Queue Registers.
+ *
+ * para:
+ * Queue Queue to access.
+ * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
+ * Offs Queue register offset.
+ * Values: Q_D, Q_DA_L ... Q_T2, Q_T3
+ *
+ * usage SK_IN32(pAC, Q_ADDR(Q_R2, Q_BC), pVal)
+ */
+#define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs))
+
+/*
+ * Macro RB_ADDR()
+ *
+ * Use this macro to access the RAM Buffer Registers.
+ *
+ * para:
+ * Queue Queue to access.
+ * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
+ * Offs Queue register offset.
+ * Values: RB_START, RB_END ... RB_LEV, RB_CTRL
+ *
+ * usage SK_IN32(pAC, RB_ADDR(Q_R2, RB_RP), pVal)
+ */
+#define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs))
+
+
+/*
+ * MAC Related Registers
+ */
+#define MAC_1 0 /* belongs to the port near the slot */
+#define MAC_2 1 /* belongs to the port far away from the slot */
+
+/*
+ * Macro MR_ADDR()
+ *
+ * Use this macro to access a MAC Related Registers inside the ASIC.
+ *
+ * para:
+ * Mac MAC to access.
+ * Values: MAC_1, MAC_2
+ * Offs MAC register offset.
+ * Values: RX_MFF_EA, RX_MFF_WP ... LNK_LED_REG,
+ * TX_MFF_EA, TX_MFF_WP ... TX_LED_TST
+ *
+ * usage SK_IN32(pAC, MR_ADDR(MAC_1, TX_MFF_EA), pVal)
+ */
+#define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs))
+
+#ifdef SK_LITTLE_ENDIAN
+#define XM_WORD_LO 0
+#define XM_WORD_HI 1
+#else /* !SK_LITTLE_ENDIAN */
+#define XM_WORD_LO 1
+#define XM_WORD_HI 0
+#endif /* !SK_LITTLE_ENDIAN */
+
+
+/*
+ * macros to access the XMAC (GENESIS only)
+ *
+ * XM_IN16(), to read a 16 bit register (e.g. XM_MMU_CMD)
+ * XM_OUT16(), to write a 16 bit register (e.g. XM_MMU_CMD)
+ * XM_IN32(), to read a 32 bit register (e.g. XM_TX_EV_CNT)
+ * XM_OUT32(), to write a 32 bit register (e.g. XM_TX_EV_CNT)
+ * XM_INADDR(), to read a network address register (e.g. XM_SRC_CHK)
+ * XM_OUTADDR(), to write a network address register (e.g. XM_SRC_CHK)
+ * XM_INHASH(), to read the XM_HSM_CHK register
+ * XM_OUTHASH() to write the XM_HSM_CHK register
+ *
+ * para:
+ * Mac XMAC to access values: MAC_1 or MAC_2
+ * IoC I/O context needed for SK I/O macros
+ * Reg XMAC Register to read or write
+ * (p)Val Value or pointer to the value which should be read or written
+ *
+ * usage: XM_OUT16(IoC, MAC_1, XM_MMU_CMD, Value);
+ */
+
+#define XMA(Mac, Reg) \
+ ((BASE_XMAC_1 + (Mac) * (BASE_XMAC_2 - BASE_XMAC_1)) | ((Reg) << 1))
+
+#define XM_IN16(IoC, Mac, Reg, pVal) \
+ SK_IN16((IoC), XMA((Mac), (Reg)), (pVal))
+
+#define XM_OUT16(IoC, Mac, Reg, Val) \
+ SK_OUT16((IoC), XMA((Mac), (Reg)), (Val))
+
+#define XM_IN32(IoC, Mac, Reg, pVal) { \
+ SK_IN16((IoC), XMA((Mac), (Reg)), \
+ (SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_LO]); \
+ SK_IN16((IoC), XMA((Mac), (Reg+2)), \
+ (SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_HI]); \
+}
+
+#define XM_OUT32(IoC, Mac, Reg, Val) { \
+ SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \
+ SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)(((Val) >> 16) & 0xffffL));\
+}
+
+/* Remember: we are always writing to / reading from LITTLE ENDIAN memory */
+
+#define XM_INADDR(IoC, Mac, Reg, pVal) { \
+ SK_U16 Word; \
+ SK_U8 *pByte; \
+ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
+ SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \
+ pByte[0] = (SK_U8)(Word & 0x00ff); \
+ pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \
+ pByte[2] = (SK_U8)(Word & 0x00ff); \
+ pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \
+ pByte[4] = (SK_U8)(Word & 0x00ff); \
+ pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \
+}
+
+#define XM_OUTADDR(IoC, Mac, Reg, pVal) { \
+ SK_U8 *pByte; \
+ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
+ SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \
+ (((SK_U16)(pByte[0]) & 0x00ff) | \
+ (((SK_U16)(pByte[1]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \
+ (((SK_U16)(pByte[2]) & 0x00ff) | \
+ (((SK_U16)(pByte[3]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \
+ (((SK_U16)(pByte[4]) & 0x00ff) | \
+ (((SK_U16)(pByte[5]) << 8) & 0xff00))); \
+}
+
+#define XM_INHASH(IoC, Mac, Reg, pVal) { \
+ SK_U16 Word; \
+ SK_U8 *pByte; \
+ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
+ SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \
+ pByte[0] = (SK_U8)(Word & 0x00ff); \
+ pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \
+ pByte[2] = (SK_U8)(Word & 0x00ff); \
+ pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \
+ pByte[4] = (SK_U8)(Word & 0x00ff); \
+ pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), XMA((Mac), (Reg+6)), &Word); \
+ pByte[6] = (SK_U8)(Word & 0x00ff); \
+ pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \
+}
+
+#define XM_OUTHASH(IoC, Mac, Reg, pVal) { \
+ SK_U8 *pByte; \
+ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
+ SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \
+ (((SK_U16)(pByte[0]) & 0x00ff)| \
+ (((SK_U16)(pByte[1]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \
+ (((SK_U16)(pByte[2]) & 0x00ff)| \
+ (((SK_U16)(pByte[3]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \
+ (((SK_U16)(pByte[4]) & 0x00ff)| \
+ (((SK_U16)(pByte[5]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), XMA((Mac), (Reg+6)), (SK_U16) \
+ (((SK_U16)(pByte[6]) & 0x00ff)| \
+ (((SK_U16)(pByte[7]) << 8) & 0xff00))); \
+}
+
+/*
+ * macros to access the GMAC (YUKON only)
+ *
+ * GM_IN16(), to read a 16 bit register (e.g. GM_GP_STAT)
+ * GM_OUT16(), to write a 16 bit register (e.g. GM_GP_CTRL)
+ * GM_IN32(), to read a 32 bit register (e.g. GM_)
+ * GM_OUT32(), to write a 32 bit register (e.g. GM_)
+ * GM_INADDR(), to read a network address register (e.g. GM_SRC_ADDR_1L)
+ * GM_OUTADDR(), to write a network address register (e.g. GM_SRC_ADDR_2L)
+ * GM_INHASH(), to read the GM_MC_ADDR_H1 register
+ * GM_OUTHASH() to write the GM_MC_ADDR_H1 register
+ *
+ * para:
+ * Mac GMAC to access values: MAC_1 or MAC_2
+ * IoC I/O context needed for SK I/O macros
+ * Reg GMAC Register to read or write
+ * (p)Val Value or pointer to the value which should be read or written
+ *
+ * usage: GM_OUT16(IoC, MAC_1, GM_GP_CTRL, Value);
+ */
+
+#define GMA(Mac, Reg) \
+ ((BASE_GMAC_1 + (Mac) * (BASE_GMAC_2 - BASE_GMAC_1)) | (Reg))
+
+#define GM_IN16(IoC, Mac, Reg, pVal) \
+ SK_IN16((IoC), GMA((Mac), (Reg)), (pVal))
+
+#define GM_OUT16(IoC, Mac, Reg, Val) \
+ SK_OUT16((IoC), GMA((Mac), (Reg)), (Val))
+
+#define GM_IN32(IoC, Mac, Reg, pVal) { \
+ SK_IN16((IoC), GMA((Mac), (Reg)), \
+ (SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_LO]); \
+ SK_IN16((IoC), GMA((Mac), (Reg+4)), \
+ (SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_HI]); \
+}
+
+#define GM_OUT32(IoC, Mac, Reg, Val) { \
+ SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \
+ SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)(((Val) >> 16) & 0xffffL));\
+}
+
+#define GM_INADDR(IoC, Mac, Reg, pVal) { \
+ SK_U16 Word; \
+ SK_U8 *pByte; \
+ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
+ SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \
+ pByte[0] = (SK_U8)(Word & 0x00ff); \
+ pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \
+ pByte[2] = (SK_U8)(Word & 0x00ff); \
+ pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \
+ pByte[4] = (SK_U8)(Word & 0x00ff); \
+ pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \
+}
+
+#define GM_OUTADDR(IoC, Mac, Reg, pVal) { \
+ SK_U8 *pByte; \
+ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
+ SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \
+ (((SK_U16)(pByte[0]) & 0x00ff) | \
+ (((SK_U16)(pByte[1]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \
+ (((SK_U16)(pByte[2]) & 0x00ff) | \
+ (((SK_U16)(pByte[3]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \
+ (((SK_U16)(pByte[4]) & 0x00ff) | \
+ (((SK_U16)(pByte[5]) << 8) & 0xff00))); \
+}
+
+#define GM_INHASH(IoC, Mac, Reg, pVal) { \
+ SK_U16 Word; \
+ SK_U8 *pByte; \
+ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
+ SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \
+ pByte[0] = (SK_U8)(Word & 0x00ff); \
+ pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \
+ pByte[2] = (SK_U8)(Word & 0x00ff); \
+ pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \
+ pByte[4] = (SK_U8)(Word & 0x00ff); \
+ pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), GMA((Mac), (Reg+12)), &Word); \
+ pByte[6] = (SK_U8)(Word & 0x00ff); \
+ pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \
+}
+
+#define GM_OUTHASH(IoC, Mac, Reg, pVal) { \
+ SK_U8 *pByte; \
+ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
+ SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \
+ (((SK_U16)(pByte[0]) & 0x00ff)| \
+ (((SK_U16)(pByte[1]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \
+ (((SK_U16)(pByte[2]) & 0x00ff)| \
+ (((SK_U16)(pByte[3]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \
+ (((SK_U16)(pByte[4]) & 0x00ff)| \
+ (((SK_U16)(pByte[5]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), GMA((Mac), (Reg+12)), (SK_U16) \
+ (((SK_U16)(pByte[6]) & 0x00ff)| \
+ (((SK_U16)(pByte[7]) << 8) & 0xff00))); \
+}
+
+/*
+ * Different MAC Types
+ */
+#define SK_MAC_XMAC 0 /* Xaqti XMAC II */
+#define SK_MAC_GMAC 1 /* Marvell GMAC */
+
+/*
+ * Different PHY Types
+ */
+#define SK_PHY_XMAC 0 /* integrated in XMAC II */
+#define SK_PHY_BCOM 1 /* Broadcom BCM5400 */
+#define SK_PHY_LONE 2 /* Level One LXT1000 */
+#define SK_PHY_NAT 3 /* National DP83891 */
+#define SK_PHY_MARV_COPPER 4 /* Marvell 88E1011S */
+#define SK_PHY_MARV_FIBER 5 /* Marvell 88E1011S working on fiber */
+
+/*
+ * PHY addresses (bits 12..8 of PHY address reg)
+ */
+#define PHY_ADDR_XMAC (0<<8)
+#define PHY_ADDR_BCOM (1<<8)
+#define PHY_ADDR_LONE (3<<8)
+#define PHY_ADDR_NAT (0<<8)
+
+/* GPHY address (bits 15..11 of SMI control reg) */
+#define PHY_ADDR_MARV 0
+
+/*
+ * macros to access the PHY
+ *
+ * PHY_READ() read a 16 bit value from the PHY
+ * PHY_WRITE() write a 16 bit value to the PHY
+ *
+ * para:
+ * IoC I/O context needed for SK I/O macros
+ * pPort Pointer to port struct for PhyAddr
+ * Mac XMAC to access values: MAC_1 or MAC_2
+ * PhyReg PHY Register to read or write
+ * (p)Val Value or pointer to the value which should be read or
+ * written.
+ *
+ * usage: PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value);
+ * Warning: a PHY_READ on an uninitialized PHY (PHY still in reset) never
+ * comes back. This is checked in DEBUG mode.
+ */
+#ifndef DEBUG
+#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \
+ SK_U16 Mmu; \
+ \
+ XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \
+ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
+ if ((pPort)->PhyType != SK_PHY_XMAC) { \
+ do { \
+ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
+ } while ((Mmu & XM_MMU_PHY_RDY) == 0); \
+ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
+ } \
+}
+#else
+#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \
+ SK_U16 Mmu; \
+ int __i = 0; \
+ \
+ XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \
+ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
+ if ((pPort)->PhyType != SK_PHY_XMAC) { \
+ do { \
+ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
+ __i++; \
+ if (__i > 100000) { \
+ SK_DBG_PRINTF("*****************************\n"); \
+ SK_DBG_PRINTF("PHY_READ on uninitialized PHY\n"); \
+ SK_DBG_PRINTF("*****************************\n"); \
+ break; \
+ } \
+ } while ((Mmu & XM_MMU_PHY_RDY) == 0); \
+ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
+ } \
+}
+#endif /* DEBUG */
+
+#define PHY_WRITE(IoC, pPort, Mac, PhyReg, Val) { \
+ SK_U16 Mmu; \
+ \
+ if ((pPort)->PhyType != SK_PHY_XMAC) { \
+ do { \
+ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
+ } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \
+ } \
+ XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \
+ XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val)); \
+ if ((pPort)->PhyType != SK_PHY_XMAC) { \
+ do { \
+ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
+ } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \
+ } \
+}
+
+/*
+ * Macro PCI_C()
+ *
+ * Use this macro to access PCI config register from the I/O space.
+ *
+ * para:
+ * Addr PCI configuration register to access.
+ * Values: PCI_VENDOR_ID ... PCI_VPD_ADR_REG,
+ *
+ * usage SK_IN16(pAC, PCI_C(PCI_VENDOR_ID), pVal);
+ */
+#define PCI_C(Addr) (B7_CFG_SPC + (Addr)) /* PCI Config Space */
+
+/*
+ * Macro SK_HW_ADDR(Base, Addr)
+ *
+ * Calculates the effective HW address
+ *
+ * para:
+ * Base I/O or memory base address
+ * Addr Address offset
+ *
+ * usage: May be used in SK_INxx and SK_OUTxx macros
+ * #define SK_IN8(pAC, Addr, pVal) ...\
+ * *pVal = (SK_U8)inp(SK_HW_ADDR(pAC->Hw.Iop, Addr)))
+ */
+#ifdef SK_MEM_MAPPED_IO
+#define SK_HW_ADDR(Base, Addr) ((Base) + (Addr))
+#else /* SK_MEM_MAPPED_IO */
+#define SK_HW_ADDR(Base, Addr) \
+ ((Base) + (((Addr) & 0x7f) | (((Addr) >> 7 > 0) ? 0x80 : 0)))
+#endif /* SK_MEM_MAPPED_IO */
+
+#define SZ_LONG (sizeof(SK_U32))
+
+/*
+ * Macro SK_HWAC_LINK_LED()
+ *
+ * Use this macro to set the link LED mode.
+ * para:
+ * pAC Pointer to adapter context struct
+ * IoC I/O context needed for SK I/O macros
+ * Port Port number
+ * Mode Mode to set for this LED
+ */
+#define SK_HWAC_LINK_LED(pAC, IoC, Port, Mode) \
+ SK_OUT8(IoC, MR_ADDR(Port, LNK_LED_REG), Mode);
+
+
+/* typedefs *******************************************************************/
+
+
+/* function prototypes ********************************************************/
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INC_SKGEHW_H */
diff --git a/drivers/net/sk98lin/h/skgehwt.h b/drivers/net/sk98lin/h/skgehwt.h
new file mode 100644
index 0000000..8aa9edd
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgehwt.h
@@ -0,0 +1,74 @@
+/******************************************************************************
+ *
+ * Name: skhwt.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.5 $
+ * Date: $Date: 1999/11/22 13:54:24 $
+ * Purpose: Defines for the hardware timer functions
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgehwt.h,v $
+ * Revision 1.5 1999/11/22 13:54:24 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.4 1998/08/19 09:50:58 gklug
+ * fix: remove struct keyword from c-code (see CCC) add typedefs
+ *
+ * Revision 1.3 1998/08/14 07:09:29 gklug
+ * fix: chg pAc -> pAC
+ *
+ * Revision 1.2 1998/08/07 12:54:21 gklug
+ * fix: first compiled version
+ *
+ * Revision 1.1 1998/08/07 09:32:58 gklug
+ * first version
+ *
+ *
+ *
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * SKGEHWT.H contains all defines and types for the timer functions
+ */
+
+#ifndef _SKGEHWT_H_
+#define _SKGEHWT_H_
+
+/*
+ * SK Hardware Timer
+ * - needed wherever the HWT module is used
+ * - use in Adapters context name pAC->Hwt
+ */
+typedef struct s_Hwt {
+ SK_U32 TStart ; /* HWT start */
+ SK_U32 TStop ; /* HWT stop */
+ int TActive ; /* HWT: flag : active/inactive */
+} SK_HWT;
+
+extern void SkHwtInit(SK_AC *pAC, SK_IOC Ioc);
+extern void SkHwtStart(SK_AC *pAC, SK_IOC Ioc, SK_U32 Time);
+extern void SkHwtStop(SK_AC *pAC, SK_IOC Ioc);
+extern SK_U32 SkHwtRead(SK_AC *pAC,SK_IOC Ioc);
+extern void SkHwtIsr(SK_AC *pAC, SK_IOC Ioc);
+#endif /* _SKGEHWT_H_ */
diff --git a/drivers/net/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h
new file mode 100644
index 0000000..e639f73
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgei2c.h
@@ -0,0 +1,299 @@
+/******************************************************************************
+ *
+ * Name: skgei2c.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.23 $
+ * Date: $Date: 2002/12/19 14:34:27 $
+ * Purpose: Special GEnesis defines for TWSI
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgei2c.h,v $
+ * Revision 1.23 2002/12/19 14:34:27 rschmidt
+ * Added cast in macros SK_I2C_SET_BIT() and SK_I2C_CLR_BIT()
+ * Editorial changes (TWSI)
+ *
+ * Revision 1.22 2002/10/14 16:45:56 rschmidt
+ * Editorial changes (TWSI)
+ *
+ * Revision 1.21 2002/08/13 08:42:24 rschmidt
+ * Changed define for SK_MIN_SENSORS back to 5
+ * Merged defines for PHY PLL 3V3 voltage (A and B)
+ * Editorial changes
+ *
+ * Revision 1.20 2002/08/06 09:43:56 jschmalz
+ * Extensions and changes for Yukon
+ *
+ * Revision 1.19 2002/08/02 12:00:08 rschmidt
+ * Added defines for YUKON sensors
+ * Editorial changes
+ *
+ * Revision 1.18 2001/08/16 12:44:33 afischer
+ * LM80 sensor init values corrected
+ *
+ * Revision 1.17 1999/11/22 13:55:25 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.16 1999/11/12 08:24:10 malthoff
+ * Change voltage warning and error limits
+ * (warning +-5%, error +-10%).
+ *
+ * Revision 1.15 1999/09/14 14:14:43 malthoff
+ * The 1000BT Dual Link adapter has got only one Fan.
+ * The second Fan has been removed.
+ *
+ * Revision 1.14 1999/05/27 13:40:50 malthoff
+ * Fan Divisor = 1. Assuming fan with 6500 rpm.
+ *
+ * Revision 1.13 1999/05/20 14:56:55 malthoff
+ * Bug Fix: Missing brace in SK_LM80_FAN_FAKTOR.
+ *
+ * Revision 1.12 1999/05/20 09:22:00 cgoos
+ * Changes for 1000Base-T (Fan sensors).
+ *
+ * Revision 1.11 1998/10/14 05:57:22 cgoos
+ * Fixed compilation warnings.
+ *
+ * Revision 1.10 1998/09/04 08:37:00 malthoff
+ * bugfix: correct the SK_I2C_GET_CTL() macro.
+ *
+ * Revision 1.9 1998/08/25 06:10:03 gklug
+ * add: thresholds for all sensors
+ *
+ * Revision 1.8 1998/08/20 11:37:42 gklug
+ * chg: change Ioc to IoC
+ *
+ * Revision 1.7 1998/08/20 08:53:11 gklug
+ * fix: compiler errors
+ * add: Threshold values
+ *
+ * Revision 1.6 1998/08/17 11:37:09 malthoff
+ * Bugfix in SK_I2C_CTL macro. The parameter 'dev'
+ * has to be shifted 9 bits.
+ *
+ * Revision 1.5 1998/08/17 06:52:21 malthoff
+ * Remove unrequired macros.
+ * Add macros for accessing TWSI SW register.
+ *
+ * Revision 1.4 1998/08/13 08:30:18 gklug
+ * add: conversion factors for read values
+ * add: new state SEN_VALEXT to read extension value of temperature sensor
+ *
+ * Revision 1.3 1998/08/12 13:37:56 gklug
+ * rmv: error numbers and messages
+ *
+ * Revision 1.2 1998/08/11 07:54:38 gklug
+ * add: sensor states for GE sensors
+ * add: Macro to access TWSI hardware register
+ * chg: Error messages for TWSI errors
+ *
+ * Revision 1.1 1998/07/17 11:27:56 gklug
+ * Created.
+ *
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * SKGEI2C.H contains all SK-98xx specific defines for the TWSI handling
+ */
+
+#ifndef _INC_SKGEI2C_H_
+#define _INC_SKGEI2C_H_
+
+/*
+ * Macros to access the B2_I2C_CTRL
+ */
+#define SK_I2C_CTL(IoC, flag, dev, reg, burst) \
+ SK_OUT32(IoC, B2_I2C_CTRL,\
+ (flag ? 0x80000000UL : 0x0L) | \
+ (((SK_U32) reg << 16) & I2C_ADDR) | \
+ (((SK_U32) dev << 9) & I2C_DEV_SEL) | \
+ (( burst << 4) & I2C_BURST_LEN))
+
+#define SK_I2C_STOP(IoC) { \
+ SK_U32 I2cCtrl; \
+ SK_IN32(IoC, B2_I2C_CTRL, &I2cCtrl); \
+ SK_OUT32(IoC, B2_I2C_CTRL, I2cCtrl | I2C_STOP); \
+}
+
+#define SK_I2C_GET_CTL(IoC, pI2cCtrl) SK_IN32(IoC, B2_I2C_CTRL, pI2cCtrl)
+
+/*
+ * Macros to access the TWSI SW Registers
+ */
+#define SK_I2C_SET_BIT(IoC, SetBits) { \
+ SK_U8 OrgBits; \
+ SK_IN8(IoC, B2_I2C_SW, &OrgBits); \
+ SK_OUT8(IoC, B2_I2C_SW, OrgBits | (SK_U8)(SetBits)); \
+}
+
+#define SK_I2C_CLR_BIT(IoC, ClrBits) { \
+ SK_U8 OrgBits; \
+ SK_IN8(IoC, B2_I2C_SW, &OrgBits); \
+ SK_OUT8(IoC, B2_I2C_SW, OrgBits & ~((SK_U8)(ClrBits))); \
+}
+
+#define SK_I2C_GET_SW(IoC, pI2cSw) SK_IN8(IoC, B2_I2C_SW, pI2cSw)
+
+/*
+ * define the possible sensor states
+ */
+#define SK_SEN_IDLE 0 /* Idle: sensor not read */
+#define SK_SEN_VALUE 1 /* Value Read cycle */
+#define SK_SEN_VALEXT 2 /* Extended Value Read cycle */
+
+/*
+ * Conversion factor to convert read Voltage sensor to milli Volt
+ * Conversion factor to convert read Temperature sensor to 10th degree Celsius
+ */
+#define SK_LM80_VT_LSB 22 /* 22mV LSB resolution */
+#define SK_LM80_TEMP_LSB 10 /* 1 degree LSB resolution */
+#define SK_LM80_TEMPEXT_LSB 5 /* 0.5 degree LSB resolution for the
+ * extension value
+ */
+#define SK_LM80_FAN_FAKTOR ((22500L*60)/(1*2))
+/* formula: counter = (22500*60)/(rpm * divisor * pulses/2)
+ * assuming: 6500rpm, 4 pulses, divisor 1
+ */
+
+/*
+ * Define sensor management data
+ * Maximum is reached on copperfield with dual Broadcom.
+ * Board specific maximum is in pAC->I2c.MaxSens
+ */
+#define SK_MAX_SENSORS 8 /* maximal no. of installed sensors */
+#define SK_MIN_SENSORS 5 /* minimal no. of installed sensors */
+
+/*
+ * To watch the statemachine (JS) use the timer in two ways instead of one as hitherto
+ */
+#define SK_TIMER_WATCH_STATEMACHINE 0 /* Watch the statemachine to finish in a specific time */
+#define SK_TIMER_NEW_GAUGING 1 /* Start a new gauging when timer expires */
+
+
+/*
+ * Defines for the individual Thresholds
+ */
+
+/* Temperature sensor */
+#define SK_SEN_TEMP_HIGH_ERR 800 /* Temperature High Err Threshold */
+#define SK_SEN_TEMP_HIGH_WARN 700 /* Temperature High Warn Threshold */
+#define SK_SEN_TEMP_LOW_WARN 100 /* Temperature Low Warn Threshold */
+#define SK_SEN_TEMP_LOW_ERR 0 /* Temperature Low Err Threshold */
+
+/* VCC which should be 5 V */
+#define SK_SEN_PCI_5V_HIGH_ERR 5588 /* Voltage PCI High Err Threshold */
+#define SK_SEN_PCI_5V_HIGH_WARN 5346 /* Voltage PCI High Warn Threshold */
+#define SK_SEN_PCI_5V_LOW_WARN 4664 /* Voltage PCI Low Warn Threshold */
+#define SK_SEN_PCI_5V_LOW_ERR 4422 /* Voltage PCI Low Err Threshold */
+
+/*
+ * VIO may be 5 V or 3.3 V. Initialization takes two parts:
+ * 1. Initialize lowest lower limit and highest higher limit.
+ * 2. After the first value is read correct the upper or the lower limit to
+ * the appropriate C constant.
+ *
+ * Warning limits are +-5% of the exepected voltage.
+ * Error limits are +-10% of the expected voltage.
+ */
+
+/* Bug fix AF: 16.Aug.2001: Correct the init base of LM80 sensor */
+
+#define SK_SEN_PCI_IO_5V_HIGH_ERR 5566 /* + 10% V PCI-IO High Err Threshold */
+#define SK_SEN_PCI_IO_5V_HIGH_WARN 5324 /* + 5% V PCI-IO High Warn Threshold */
+ /* 5000 mVolt */
+#define SK_SEN_PCI_IO_5V_LOW_WARN 4686 /* - 5% V PCI-IO Low Warn Threshold */
+#define SK_SEN_PCI_IO_5V_LOW_ERR 4444 /* - 10% V PCI-IO Low Err Threshold */
+
+#define SK_SEN_PCI_IO_RANGE_LIMITER 4000 /* 4000 mV range delimiter */
+
+/* correction values for the second pass */
+#define SK_SEN_PCI_IO_3V3_HIGH_ERR 3850 /* + 15% V PCI-IO High Err Threshold */
+#define SK_SEN_PCI_IO_3V3_HIGH_WARN 3674 /* + 10% V PCI-IO High Warn Threshold */
+ /* 3300 mVolt */
+#define SK_SEN_PCI_IO_3V3_LOW_WARN 2926 /* - 10% V PCI-IO Low Warn Threshold */
+#define SK_SEN_PCI_IO_3V3_LOW_ERR 2772 /* - 15% V PCI-IO Low Err Threshold */
+
+
+/*
+ * VDD voltage
+ */
+#define SK_SEN_VDD_HIGH_ERR 3630 /* Voltage ASIC High Err Threshold */
+#define SK_SEN_VDD_HIGH_WARN 3476 /* Voltage ASIC High Warn Threshold */
+#define SK_SEN_VDD_LOW_WARN 3146 /* Voltage ASIC Low Warn Threshold */
+#define SK_SEN_VDD_LOW_ERR 2970 /* Voltage ASIC Low Err Threshold */
+
+/*
+ * PHY PLL 3V3 voltage
+ */
+#define SK_SEN_PLL_3V3_HIGH_ERR 3630 /* Voltage PMA High Err Threshold */
+#define SK_SEN_PLL_3V3_HIGH_WARN 3476 /* Voltage PMA High Warn Threshold */
+#define SK_SEN_PLL_3V3_LOW_WARN 3146 /* Voltage PMA Low Warn Threshold */
+#define SK_SEN_PLL_3V3_LOW_ERR 2970 /* Voltage PMA Low Err Threshold */
+
+/*
+ * VAUX (YUKON only)
+ */
+#define SK_SEN_VAUX_3V3_HIGH_ERR 3630 /* Voltage VAUX High Err Threshold */
+#define SK_SEN_VAUX_3V3_HIGH_WARN 3476 /* Voltage VAUX High Warn Threshold */
+#define SK_SEN_VAUX_3V3_LOW_WARN 3146 /* Voltage VAUX Low Warn Threshold */
+#define SK_SEN_VAUX_3V3_LOW_ERR 2970 /* Voltage VAUX Low Err Threshold */
+#define SK_SEN_VAUX_0V_WARN_ERR 0 /* if VAUX not present */
+#define SK_SEN_VAUX_RANGE_LIMITER 1000 /* 1000 mV range delimiter */
+
+/*
+ * PHY 2V5 voltage
+ */
+#define SK_SEN_PHY_2V5_HIGH_ERR 2750 /* Voltage PHY High Err Threshold */
+#define SK_SEN_PHY_2V5_HIGH_WARN 2640 /* Voltage PHY High Warn Threshold */
+#define SK_SEN_PHY_2V5_LOW_WARN 2376 /* Voltage PHY Low Warn Threshold */
+#define SK_SEN_PHY_2V5_LOW_ERR 2222 /* Voltage PHY Low Err Threshold */
+
+/*
+ * ASIC Core 1V5 voltage (YUKON only)
+ */
+#define SK_SEN_CORE_1V5_HIGH_ERR 1650 /* Voltage ASIC Core High Err Threshold */
+#define SK_SEN_CORE_1V5_HIGH_WARN 1575 /* Voltage ASIC Core High Warn Threshold */
+#define SK_SEN_CORE_1V5_LOW_WARN 1425 /* Voltage ASIC Core Low Warn Threshold */
+#define SK_SEN_CORE_1V5_LOW_ERR 1350 /* Voltage ASIC Core Low Err Threshold */
+
+/*
+ * FAN 1 speed
+ */
+/* assuming: 6500rpm +-15%, 4 pulses,
+ * warning at: 80 %
+ * error at: 70 %
+ * no upper limit
+ */
+#define SK_SEN_FAN_HIGH_ERR 20000 /* FAN Speed High Err Threshold */
+#define SK_SEN_FAN_HIGH_WARN 20000 /* FAN Speed High Warn Threshold */
+#define SK_SEN_FAN_LOW_WARN 5200 /* FAN Speed Low Warn Threshold */
+#define SK_SEN_FAN_LOW_ERR 4550 /* FAN Speed Low Err Threshold */
+
+/*
+ * Some Voltages need dynamic thresholds
+ */
+#define SK_SEN_DYN_INIT_NONE 0 /* No dynamic init of thresholds */
+#define SK_SEN_DYN_INIT_PCI_IO 10 /* Init PCI-IO with new thresholds */
+#define SK_SEN_DYN_INIT_VAUX 11 /* Init VAUX with new thresholds */
+
+extern int SkLm80ReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
+#endif /* n_INC_SKGEI2C_H */
diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h
new file mode 100644
index 0000000..cdddef9
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgeinit.h
@@ -0,0 +1,1113 @@
+/******************************************************************************
+ *
+ * Name: skgeinit.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.75 $
+ * Date: $Date: 2003/02/05 13:36:39 $
+ * Purpose: Structures and prototypes for the GE Init Module
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgeinit.h,v $
+ * Revision 1.75 2003/02/05 13:36:39 rschmidt
+ * Added define SK_FACT_78 for YUKON's Host Clock of 78.12 MHz
+ * Editorial changes
+ *
+ * Revision 1.74 2003/01/28 09:39:16 rschmidt
+ * Added entry GIYukonLite in s_GeInit structure
+ * Editorial changes
+ *
+ * Revision 1.73 2002/11/15 12:47:25 rschmidt
+ * Replaced error message SKERR_HWI_E024 for Cable Diagnostic with
+ * Rx queue error in SkGeStopPort().
+ *
+ * Revision 1.72 2002/11/12 17:08:35 rschmidt
+ * Added entries for Cable Diagnostic to Port structure
+ * Added entries GIPciSlot64 and GIPciClock66 in s_GeInit structure
+ * Added error message for Cable Diagnostic
+ * Added prototypes for SkGmCableDiagStatus()
+ * Editorial changes
+ *
+ * Revision 1.71 2002/10/21 11:26:10 mkarl
+ * Changed interface of SkGeInitAssignRamToQueues().
+ *
+ * Revision 1.70 2002/10/14 08:21:32 rschmidt
+ * Changed type of GICopperType, GIVauxAvail to SK_BOOL
+ * Added entry PRxOverCnt to Port structure
+ * Added entry GIYukon32Bit in s_GeInit structure
+ * Editorial changes
+ *
+ * Revision 1.69 2002/10/09 16:57:15 mkarl
+ * Added some constants and macros for SkGeInitAssignRamToQueues().
+ *
+ * Revision 1.68 2002/09/12 08:58:51 rwahl
+ * Retrieve counters needed for XMAC errata workarounds directly because
+ * PNMI returns corrected counter values (e.g. #10620).
+ *
+ * Revision 1.67 2002/08/16 14:40:30 rschmidt
+ * Added entries GIGenesis and GICopperType in s_GeInit structure
+ * Added prototypes for SkMacHashing()
+ * Editorial changes
+ *
+ * Revision 1.66 2002/08/12 13:27:21 rschmidt
+ * Added defines for Link speed capabilities
+ * Added entry PLinkSpeedCap to Port structure
+ * Added entry GIVauxAvail in s_GeInit structure
+ * Added prototypes for SkMacPromiscMode()
+ * Editorial changes
+ *
+ * Revision 1.65 2002/08/08 15:46:18 rschmidt
+ * Added define SK_PHY_ACC_TO for PHY access timeout
+ * Added define SK_XM_RX_HI_WM for XMAC Rx High Watermark
+ * Added define SK_MIN_TXQ_SIZE for Min RAM Buffer Tx Queue Size
+ * Added entry PhyId1 to Port structure
+ *
+ * Revision 1.64 2002/07/23 16:02:56 rschmidt
+ * Added entry GIWolOffs in s_GeInit struct (HW-Bug in YUKON 1st rev.)
+ * Added prototypes for: SkGePhyRead(), SkGePhyWrite()
+ *
+ * Revision 1.63 2002/07/18 08:17:38 rwahl
+ * Corrected definitions for SK_LSPEED_xxx & SK_LSPEED_STAT_xxx.
+ *
+ * Revision 1.62 2002/07/17 18:21:55 rwahl
+ * Added SK_LSPEED_INDETERMINATED define.
+ *
+ * Revision 1.61 2002/07/17 17:16:03 rwahl
+ * - MacType now member of GIni struct.
+ * - Struct alignment to 32bit.
+ * - Editorial change.
+ *
+ * Revision 1.60 2002/07/15 18:23:39 rwahl
+ * Added GeMacFunc to GE Init structure.
+ * Added prototypes for SkXmUpdateStats(), SkGmUpdateStats(),
+ * SkXmMacStatistic(), SkGmMacStatistic(), SkXmResetCounter(),
+ * SkGmResetCounter(), SkXmOverflowStatus(), SkGmOverflowStatus().
+ * Added defines for current link speed state.
+ * Added ERRMSG defintions for MacUpdateStat() & MacStatistics().
+ *
+ * Revision 1.59 2002/07/15 15:40:22 rschmidt
+ * Added entry PLinkSpeedUsed to Port structure
+ * Editorial changes
+ *
+ * Revision 1.58 2002/06/10 09:36:30 rschmidt
+ * Editorial changes.
+ *
+ * Revision 1.57 2002/06/05 08:18:00 rschmidt
+ * Corrected alignment in Port Structure
+ * Added new prototypes for GMAC
+ * Editorial changes
+ *
+ * Revision 1.56 2002/04/25 11:38:12 rschmidt
+ * Added defines for Link speed values
+ * Added defines for Loopback parameters for MAC and PHY
+ * Removed entry PRxCmd from Port structure
+ * Added entry PLinkSpeed to Port structure
+ * Added entries GIChipId and GIChipRev to GE Init structure
+ * Removed entry GIAnyPortAct from GE Init structure
+ * Added prototypes for: SkMacInit(), SkMacInitPhy(),
+ * SkMacRxTxDisable(), SkMacSoftRst(), SkMacHardRst(), SkMacIrq(),
+ * SkMacIrqDisable(), SkMacFlushTxFifo(), SkMacFlushRxFifo(),
+ * SkMacAutoNegDone(), SkMacAutoNegLipaPhy(), SkMacSetRxTxEn(),
+ * SkXmPhyRead(), SkXmPhyRead(), SkGmPhyWrite(), SkGmPhyWrite();
+ * Removed prototypes for static functions in SkXmac2.c
+ * Editorial changes
+ *
+ * Revision 1.55 2002/02/26 15:24:53 rwahl
+ * Fix: no link with manual configuration (#10673). The previous fix for
+ * #10639 was removed. So for RLMT mode = CLS the RLMT may switch to
+ * misconfigured port. It should not occur for the other RLMT modes.
+ *
+ * Revision 1.54 2002/01/18 16:52:52 rwahl
+ * Editorial corrections.
+ *
+ * Revision 1.53 2001/11/20 09:19:58 rwahl
+ * Reworked bugfix #10639 (no dependency to RLMT mode).
+ *
+ * Revision 1.52 2001/10/26 07:52:23 afischer
+ * Port switching bug in `check local link` mode
+ *
+ * Revision 1.51 2001/02/09 12:26:38 cgoos
+ * Inserted #ifdef DIAG for half duplex workaround timer.
+ *
+ * Revision 1.50 2001/02/07 07:56:40 rassmann
+ * Corrected copyright.
+ *
+ * Revision 1.49 2001/01/31 15:32:18 gklug
+ * fix: problem with autosensing an SR8800 switch
+ * add: counter for autoneg timeouts
+ *
+ * Revision 1.48 2000/11/09 11:30:10 rassmann
+ * WA: Waiting after releasing reset until BCom chip is accessible.
+ *
+ * Revision 1.47 2000/10/18 12:22:40 cgoos
+ * Added workaround for half duplex hangup.
+ *
+ * Revision 1.46 2000/08/10 11:28:00 rassmann
+ * Editorial changes.
+ * Preserving 32-bit alignment in structs for the adapter context.
+ *
+ * Revision 1.45 1999/11/22 13:56:19 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.44 1999/10/26 07:34:15 malthoff
+ * The define SK_LNK_ON has been lost in v1.41.
+ *
+ * Revision 1.43 1999/10/06 09:30:16 cgoos
+ * Changed SK_XM_THR_JUMBO.
+ *
+ * Revision 1.42 1999/09/16 12:58:26 cgoos
+ * Changed SK_LED_STANDY macro to be independent of HW link sync.
+ *
+ * Revision 1.41 1999/07/30 06:56:14 malthoff
+ * Correct comment for SK_MS_STAT_UNSET.
+ *
+ * Revision 1.40 1999/05/27 13:38:46 cgoos
+ * Added SK_BMU_TX_WM.
+ * Made SK_BMU_TX_WM and SK_BMU_RX_WM user-definable.
+ * Changed XMAC Tx treshold to max. values.
+ *
+ * Revision 1.39 1999/05/20 14:35:26 malthoff
+ * Remove prototypes for SkGeLinkLED().
+ *
+ * Revision 1.38 1999/05/19 11:59:12 cgoos
+ * Added SK_MS_CAP_INDETERMINATED define.
+ *
+ * Revision 1.37 1999/05/19 07:32:33 cgoos
+ * Changes for 1000Base-T.
+ * LED-defines for HWAC_LINK_LED macro.
+ *
+ * Revision 1.36 1999/04/08 14:00:24 gklug
+ * add:Port struct field PLinkResCt
+ *
+ * Revision 1.35 1999/03/25 07:43:07 malthoff
+ * Add error string for SKERR_HWI_E018MSG.
+ *
+ * Revision 1.34 1999/03/12 16:25:57 malthoff
+ * Remove PPollRxD and PPollTxD.
+ * Add SKERR_HWI_E017MSG. and SK_DPOLL_MAX.
+ *
+ * Revision 1.33 1999/03/12 13:34:41 malthoff
+ * Add Autonegotiation error codes.
+ * Change defines for parameter Mode in SkXmSetRxCmd().
+ * Replace __STDC__ by SK_KR_PROTO.
+ *
+ * Revision 1.32 1999/01/25 14:40:20 mhaveman
+ * Added new return states for the virtual management port if multiple
+ * ports are active but differently configured.
+ *
+ * Revision 1.31 1998/12/11 15:17:02 gklug
+ * add: Link partnet autoneg states : Unknown Manual and Auto-negotiation
+ *
+ * Revision 1.30 1998/12/07 12:17:04 gklug
+ * add: Link Partner auto-negotiation flag
+ *
+ * Revision 1.29 1998/12/01 10:54:42 gklug
+ * add: variables for XMAC Errata
+ *
+ * Revision 1.28 1998/12/01 10:14:15 gklug
+ * add: PIsave saves the Interrupt status word
+ *
+ * Revision 1.27 1998/11/26 15:24:52 mhaveman
+ * Added link status states SK_LMODE_STAT_AUTOHALF and
+ * SK_LMODE_STAT_AUTOFULL which are used by PNMI.
+ *
+ * Revision 1.26 1998/11/26 14:53:01 gklug
+ * add:autoNeg Timeout variable
+ *
+ * Revision 1.25 1998/11/26 08:58:50 gklug
+ * add: Link Mode configuration (AUTO Sense mode)
+ *
+ * Revision 1.24 1998/11/24 13:30:27 gklug
+ * add: PCheckPar to port struct
+ *
+ * Revision 1.23 1998/11/18 13:23:26 malthoff
+ * Add SK_PKT_TO_MAX.
+ *
+ * Revision 1.22 1998/11/18 13:19:54 gklug
+ * add: PPrevShorts and PLinkBroken to port struct for WA XMAC Errata #C1
+ *
+ * Revision 1.21 1998/10/26 08:02:57 malthoff
+ * Add GIRamOffs.
+ *
+ * Revision 1.20 1998/10/19 07:28:37 malthoff
+ * Add prototype for SkGeInitRamIface().
+ *
+ * Revision 1.19 1998/10/14 14:47:48 malthoff
+ * SK_TIMER should not be defined for Diagnostics.
+ * Add SKERR_HWI_E015MSG and SKERR_HWI_E016MSG.
+ *
+ * Revision 1.18 1998/10/14 14:00:03 gklug
+ * add: timer to port struct for workaround of Errata #2
+ *
+ * Revision 1.17 1998/10/14 11:23:09 malthoff
+ * Add prototype for SkXmAutoNegDone().
+ * Fix SkXmSetRxCmd() prototype statement.
+ *
+ * Revision 1.16 1998/10/14 05:42:29 gklug
+ * add: HWLinkUp flag to Port struct
+ *
+ * Revision 1.15 1998/10/09 08:26:33 malthoff
+ * Rename SK_RB_ULPP_B to SK_RB_LLPP_B.
+ *
+ * Revision 1.14 1998/10/09 07:11:13 malthoff
+ * bug fix: SK_FACT_53 is 85 not 117.
+ * Rework time out init values.
+ * Add GIPortUsage and corresponding defines.
+ * Add some error log messages.
+ *
+ * Revision 1.13 1998/10/06 14:13:14 malthoff
+ * Add prototype for SkGeLoadLnkSyncCnt().
+ *
+ * Revision 1.12 1998/10/05 11:29:53 malthoff
+ * bug fix: A comment was not closed.
+ *
+ * Revision 1.11 1998/10/05 08:01:59 malthoff
+ * Add default Timeout- Threshold- and
+ * Watermark constants. Add QRam start and end
+ * variables. Also add vars to store the polling
+ * mode and receive command. Add new Error Log
+ * Messages and function prototypes.
+ *
+ * Revision 1.10 1998/09/28 13:34:48 malthoff
+ * Add mode bits for LED functions.
+ * Move Autoneg and Flow Ctrl bits from shgesirq.h
+ * Add the required Error Log Entries
+ * and Function Prototypes.
+ *
+ * Revision 1.9 1998/09/16 14:38:41 malthoff
+ * Rework the SK_LNK_xxx defines.
+ * Add error log message defines.
+ * Add prototypes for skxmac2.c
+ *
+ * Revision 1.8 1998/09/11 05:29:18 gklug
+ * add: init state of a port
+ *
+ * Revision 1.7 1998/09/08 08:35:52 gklug
+ * add: defines of the Init Levels
+ *
+ * Revision 1.6 1998/09/03 13:48:42 gklug
+ * add: Link strati, capabilities to Port struct
+ *
+ * Revision 1.5 1998/09/03 13:30:59 malthoff
+ * Add SK_LNK_BLINK and SK_LNK_PERM.
+ *
+ * Revision 1.4 1998/09/03 09:55:31 malthoff
+ * Add constants for parameters Dir and RstMode
+ * when calling SkGeStopPort().
+ * Rework the prototype section.
+ * Add Queue Address offsets PRxQOff, PXsQOff, and PXaQOff.
+ * Remove Ioc with IoC.
+ *
+ * Revision 1.3 1998/08/19 09:11:54 gklug
+ * fix: struct are removed from c-source (see CCC)
+ * add: typedefs for all structs
+ *
+ * Revision 1.2 1998/07/28 12:38:26 malthoff
+ * The prototypes got the parameter 'IoC'.
+ *
+ * Revision 1.1 1998/07/23 09:50:24 malthoff
+ * Created.
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEINIT_H_
+#define __INC_SKGEINIT_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* defines ********************************************************************/
+
+/* modifying Link LED behaviour (used with SkGeLinkLED()) */
+#define SK_LNK_OFF LED_OFF
+#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
+#define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON)
+#define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON)
+#define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF)
+
+/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */
+#define SK_LED_OFF LED_OFF
+#define SK_LED_ACTIVE (LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
+#define SK_LED_STANDBY (LED_ON | LED_BLK_ON | LED_SYNC_OFF)
+
+/* addressing LED Registers in SkGeXmitLED() */
+#define XMIT_LED_INI 0
+#define XMIT_LED_CNT (RX_LED_VAL - RX_LED_INI)
+#define XMIT_LED_CTRL (RX_LED_CTRL- RX_LED_INI)
+#define XMIT_LED_TST (RX_LED_TST - RX_LED_INI)
+
+/* parameter 'Mode' when calling SkGeXmitLED() */
+#define SK_LED_DIS 0
+#define SK_LED_ENA 1
+#define SK_LED_TST 2
+
+/* Counter and Timer constants, for a host clock of 62.5 MHz */
+#define SK_XMIT_DUR 0x002faf08L /* 50 ms */
+#define SK_BLK_DUR 0x01dcd650L /* 500 ms */
+
+#define SK_DPOLL_DEF 0x00ee6b28L /* 250 ms at 62.5 MHz */
+
+#define SK_DPOLL_MAX 0x00ffffffL /* 268 ms at 62.5 MHz */
+ /* 215 ms at 78.12 MHz */
+
+#define SK_FACT_62 100 /* is given in percent */
+#define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */
+#define SK_FACT_78 125 /* on YUKON: 78.12 MHz */
+
+/* Timeout values */
+#define SK_MAC_TO_53 72 /* MAC arbiter timeout */
+#define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */
+#define SK_PKT_TO_MAX 0xffff /* Maximum value */
+#define SK_RI_TO_53 36 /* RAM interface timeout */
+
+#define SK_PHY_ACC_TO 600000 /* PHY access timeout */
+
+/* RAM Buffer High Pause Threshold values */
+#define SK_RB_ULPP ( 8 * 1024) /* Upper Level in kB/8 */
+#define SK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */
+#define SK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */
+
+#ifndef SK_BMU_RX_WM
+#define SK_BMU_RX_WM 0x600 /* BMU Rx Watermark */
+#endif
+#ifndef SK_BMU_TX_WM
+#define SK_BMU_TX_WM 0x600 /* BMU Tx Watermark */
+#endif
+
+/* XMAC II Rx High Watermark */
+#define SK_XM_RX_HI_WM 0x05aa /* 1450 */
+
+/* XMAC II Tx Threshold */
+#define SK_XM_THR_REDL 0x01fb /* .. for redundant link usage */
+#define SK_XM_THR_SL 0x01fb /* .. for single link adapters */
+#define SK_XM_THR_MULL 0x01fb /* .. for multiple link usage */
+#define SK_XM_THR_JUMBO 0x03fc /* .. for jumbo frame usage */
+
+/* values for GIPortUsage */
+#define SK_RED_LINK 1 /* redundant link usage */
+#define SK_MUL_LINK 2 /* multiple link usage */
+#define SK_JUMBO_LINK 3 /* driver uses jumbo frames */
+
+/* Minimum RAM Buffer Rx Queue Size */
+#define SK_MIN_RXQ_SIZE 16 /* 16 kB */
+
+/* Minimum RAM Buffer Tx Queue Size */
+#define SK_MIN_TXQ_SIZE 16 /* 16 kB */
+
+/* Queue Size units */
+#define QZ_UNITS 0x7
+#define QZ_STEP 8
+
+/* Percentage of queue size from whole memory */
+/* 80 % for receive */
+#define RAM_QUOTA_RX 80L
+/* 0% for sync transfer */
+#define RAM_QUOTA_SYNC 0L
+/* the rest (20%) is taken for async transfer */
+
+/* Get the rounded queue size in Bytes in 8k steps */
+#define ROUND_QUEUE_SIZE(SizeInBytes) \
+ ((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) & \
+ ~(QZ_STEP-1))
+
+/* Get the rounded queue size in KBytes in 8k steps */
+#define ROUND_QUEUE_SIZE_KB(Kilobytes) \
+ ROUND_QUEUE_SIZE((Kilobytes) * 1024L)
+
+/* Types of RAM Buffer Queues */
+#define SK_RX_SRAM_Q 1 /* small receive queue */
+#define SK_RX_BRAM_Q 2 /* big receive queue */
+#define SK_TX_RAM_Q 3 /* small or big transmit queue */
+
+/* parameter 'Dir' when calling SkGeStopPort() */
+#define SK_STOP_TX 1 /* Stops the transmit path, resets the XMAC */
+#define SK_STOP_RX 2 /* Stops the receive path */
+#define SK_STOP_ALL 3 /* Stops Rx and Tx path, resets the XMAC */
+
+/* parameter 'RstMode' when calling SkGeStopPort() */
+#define SK_SOFT_RST 1 /* perform a software reset */
+#define SK_HARD_RST 2 /* perform a hardware reset */
+
+/* Init Levels */
+#define SK_INIT_DATA 0 /* Init level 0: init data structures */
+#define SK_INIT_IO 1 /* Init level 1: init with IOs */
+#define SK_INIT_RUN 2 /* Init level 2: init for run time */
+
+/* Link Mode Parameter */
+#define SK_LMODE_HALF 1 /* Half Duplex Mode */
+#define SK_LMODE_FULL 2 /* Full Duplex Mode */
+#define SK_LMODE_AUTOHALF 3 /* AutoHalf Duplex Mode */
+#define SK_LMODE_AUTOFULL 4 /* AutoFull Duplex Mode */
+#define SK_LMODE_AUTOBOTH 5 /* AutoBoth Duplex Mode */
+#define SK_LMODE_AUTOSENSE 6 /* configured mode auto sensing */
+#define SK_LMODE_INDETERMINATED 7 /* indeterminated */
+
+/* Auto-negotiation timeout in 100ms granularity */
+#define SK_AND_MAX_TO 6 /* Wait 600 msec before link comes up */
+
+/* Auto-negotiation error codes */
+#define SK_AND_OK 0 /* no error */
+#define SK_AND_OTHER 1 /* other error than below */
+#define SK_AND_DUP_CAP 2 /* Duplex capabilities error */
+
+
+/* Link Speed Capabilities */
+#define SK_LSPEED_CAP_AUTO (1<<0) /* Automatic resolution */
+#define SK_LSPEED_CAP_10MBPS (1<<1) /* 10 Mbps */
+#define SK_LSPEED_CAP_100MBPS (1<<2) /* 100 Mbps */
+#define SK_LSPEED_CAP_1000MBPS (1<<3) /* 1000 Mbps */
+#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */
+
+/* Link Speed Parameter */
+#define SK_LSPEED_AUTO 1 /* Automatic resolution */
+#define SK_LSPEED_10MBPS 2 /* 10 Mbps */
+#define SK_LSPEED_100MBPS 3 /* 100 Mbps */
+#define SK_LSPEED_1000MBPS 4 /* 1000 Mbps */
+#define SK_LSPEED_INDETERMINATED 5 /* indeterminated */
+
+/* Link Speed Current State */
+#define SK_LSPEED_STAT_UNKNOWN 1
+#define SK_LSPEED_STAT_10MBPS 2
+#define SK_LSPEED_STAT_100MBPS 3
+#define SK_LSPEED_STAT_1000MBPS 4
+#define SK_LSPEED_STAT_INDETERMINATED 5
+
+
+/* Link Capability Parameter */
+#define SK_LMODE_CAP_HALF (1<<0) /* Half Duplex Mode */
+#define SK_LMODE_CAP_FULL (1<<1) /* Full Duplex Mode */
+#define SK_LMODE_CAP_AUTOHALF (1<<2) /* AutoHalf Duplex Mode */
+#define SK_LMODE_CAP_AUTOFULL (1<<3) /* AutoFull Duplex Mode */
+#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */
+
+/* Link Mode Current State */
+#define SK_LMODE_STAT_UNKNOWN 1 /* Unknown Duplex Mode */
+#define SK_LMODE_STAT_HALF 2 /* Half Duplex Mode */
+#define SK_LMODE_STAT_FULL 3 /* Full Duplex Mode */
+#define SK_LMODE_STAT_AUTOHALF 4 /* Half Duplex Mode obtained by Auto-Neg */
+#define SK_LMODE_STAT_AUTOFULL 5 /* Full Duplex Mode obtained by Auto-Neg */
+#define SK_LMODE_STAT_INDETERMINATED 6 /* indeterminated */
+
+/* Flow Control Mode Parameter (and capabilities) */
+#define SK_FLOW_MODE_NONE 1 /* No Flow-Control */
+#define SK_FLOW_MODE_LOC_SEND 2 /* Local station sends PAUSE */
+#define SK_FLOW_MODE_SYMMETRIC 3 /* Both stations may send PAUSE */
+#define SK_FLOW_MODE_SYM_OR_REM 4 /* Both stations may send PAUSE or
+ * just the remote station may send PAUSE
+ */
+#define SK_FLOW_MODE_INDETERMINATED 5 /* indeterminated */
+
+/* Flow Control Status Parameter */
+#define SK_FLOW_STAT_NONE 1 /* No Flow Control */
+#define SK_FLOW_STAT_REM_SEND 2 /* Remote Station sends PAUSE */
+#define SK_FLOW_STAT_LOC_SEND 3 /* Local station sends PAUSE */
+#define SK_FLOW_STAT_SYMMETRIC 4 /* Both station may send PAUSE */
+#define SK_FLOW_STAT_INDETERMINATED 5 /* indeterminated */
+
+/* Master/Slave Mode Capabilities */
+#define SK_MS_CAP_AUTO (1<<0) /* Automatic resolution */
+#define SK_MS_CAP_MASTER (1<<1) /* This station is master */
+#define SK_MS_CAP_SLAVE (1<<2) /* This station is slave */
+#define SK_MS_CAP_INDETERMINATED (1<<3) /* indeterminated */
+
+/* Set Master/Slave Mode Parameter (and capabilities) */
+#define SK_MS_MODE_AUTO 1 /* Automatic resolution */
+#define SK_MS_MODE_MASTER 2 /* This station is master */
+#define SK_MS_MODE_SLAVE 3 /* This station is slave */
+#define SK_MS_MODE_INDETERMINATED 4 /* indeterminated */
+
+/* Master/Slave Status Parameter */
+#define SK_MS_STAT_UNSET 1 /* The M/S status is not set */
+#define SK_MS_STAT_MASTER 2 /* This station is Master */
+#define SK_MS_STAT_SLAVE 3 /* This station is Dlave */
+#define SK_MS_STAT_FAULT 4 /* M/S resolution failed */
+#define SK_MS_STAT_INDETERMINATED 5 /* indeterminated */
+
+/* parameter 'Mode' when calling SkXmSetRxCmd() */
+#define SK_STRIP_FCS_ON (1<<0) /* Enable FCS stripping of Rx frames */
+#define SK_STRIP_FCS_OFF (1<<1) /* Disable FCS stripping of Rx frames */
+#define SK_STRIP_PAD_ON (1<<2) /* Enable pad byte stripping of Rx fr */
+#define SK_STRIP_PAD_OFF (1<<3) /* Disable pad byte stripping of Rx fr */
+#define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */
+#define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */
+#define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */
+#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */
+#define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */
+#define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */
+
+/* parameter 'Para' when calling SkMacSetRxTxEn() */
+#define SK_MAC_LOOPB_ON (1<<0) /* Enable MAC Loopback Mode */
+#define SK_MAC_LOOPB_OFF (1<<1) /* Disable MAC Loopback Mode */
+#define SK_PHY_LOOPB_ON (1<<2) /* Enable PHY Loopback Mode */
+#define SK_PHY_LOOPB_OFF (1<<3) /* Disable PHY Loopback Mode */
+#define SK_PHY_FULLD_ON (1<<4) /* Enable GMII Full Duplex */
+#define SK_PHY_FULLD_OFF (1<<5) /* Disable GMII Full Duplex */
+
+/* States of PState */
+#define SK_PRT_RESET 0 /* the port is reset */
+#define SK_PRT_STOP 1 /* the port is stopped (similar to SW reset) */
+#define SK_PRT_INIT 2 /* the port is initialized */
+#define SK_PRT_RUN 3 /* the port has an active link */
+
+/* Default receive frame limit for Workaround of XMAC Errata */
+#define SK_DEF_RX_WA_LIM SK_CONSTU64(100)
+
+/* Link Partner Status */
+#define SK_LIPA_UNKNOWN 0 /* Link partner is in unknown state */
+#define SK_LIPA_MANUAL 1 /* Link partner is in detected manual state */
+#define SK_LIPA_AUTO 2 /* Link partner is in auto-negotiation state */
+
+/* Maximum Restarts before restart is ignored (3Com WA) */
+#define SK_MAX_LRESTART 3 /* Max. 3 times the link is restarted */
+
+/* Max. Auto-neg. timeouts before link detection in sense mode is reset */
+#define SK_MAX_ANEG_TO 10 /* Max. 10 times the sense mode is reset */
+
+/* structures *****************************************************************/
+
+/*
+ * MAC specific functions
+ */
+typedef struct s_GeMacFunc {
+ int (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
+ int (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
+ SK_U16 StatAddr, SK_U32 *pVal);
+ int (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
+ int (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
+ SK_U16 IStatus, SK_U64 *pVal);
+} SK_GEMACFUNC;
+
+/*
+ * Port Structure
+ */
+typedef struct s_GePort {
+#ifndef SK_DIAG
+ SK_TIMER PWaTimer; /* Workaround Timer */
+ SK_TIMER HalfDupChkTimer;
+#endif /* SK_DIAG */
+ SK_U32 PPrevShorts; /* Previous short Counter checking */
+ SK_U32 PPrevFcs; /* Previous FCS Error Counter checking */
+ SK_U64 PPrevRx; /* Previous RxOk Counter checking */
+ SK_U64 PRxLim; /* Previous RxOk Counter checking */
+ SK_U64 LastOctets; /* For half duplex hang check */
+ int PLinkResCt; /* Link Restart Counter */
+ int PAutoNegTimeOut;/* Auto-negotiation timeout current value */
+ int PAutoNegTOCt; /* Auto-negotiation Timeout Counter */
+ int PRxQSize; /* Port Rx Queue Size in kB */
+ int PXSQSize; /* Port Synchronous Transmit Queue Size in kB */
+ int PXAQSize; /* Port Asynchronous Transmit Queue Size in kB */
+ SK_U32 PRxQRamStart; /* Receive Queue RAM Buffer Start Address */
+ SK_U32 PRxQRamEnd; /* Receive Queue RAM Buffer End Address */
+ SK_U32 PXsQRamStart; /* Sync Tx Queue RAM Buffer Start Address */
+ SK_U32 PXsQRamEnd; /* Sync Tx Queue RAM Buffer End Address */
+ SK_U32 PXaQRamStart; /* Async Tx Queue RAM Buffer Start Address */
+ SK_U32 PXaQRamEnd; /* Async Tx Queue RAM Buffer End Address */
+ SK_U32 PRxOverCnt; /* Receive Overflow Counter */
+ int PRxQOff; /* Rx Queue Address Offset */
+ int PXsQOff; /* Synchronous Tx Queue Address Offset */
+ int PXaQOff; /* Asynchronous Tx Queue Address Offset */
+ int PhyType; /* PHY used on this port */
+ SK_U16 PhyId1; /* PHY Id1 on this port */
+ SK_U16 PhyAddr; /* MDIO/MDC PHY address */
+ SK_U16 PIsave; /* Saved Interrupt status word */
+ SK_U16 PSsave; /* Saved PHY status word */
+ SK_BOOL PHWLinkUp; /* The hardware Link is up (wiring) */
+ SK_BOOL PState; /* Is port initialized ? */
+ SK_BOOL PLinkBroken; /* Is Link broken ? */
+ SK_BOOL PCheckPar; /* Do we check for parity errors ? */
+ SK_BOOL HalfDupTimerActive;
+ SK_U8 PLinkCap; /* Link Capabilities */
+ SK_U8 PLinkModeConf; /* Link Mode configured */
+ SK_U8 PLinkMode; /* Link Mode currently used */
+ SK_U8 PLinkModeStatus;/* Link Mode Status */
+ SK_U8 PLinkSpeedCap; /* Link Speed Capabilities(10/100/1000 Mbps) */
+ SK_U8 PLinkSpeed; /* configured Link Speed (10/100/1000 Mbps) */
+ SK_U8 PLinkSpeedUsed; /* current Link Speed (10/100/1000 Mbps) */
+ SK_U8 PFlowCtrlCap; /* Flow Control Capabilities */
+ SK_U8 PFlowCtrlMode; /* Flow Control Mode */
+ SK_U8 PFlowCtrlStatus;/* Flow Control Status */
+ SK_U8 PMSCap; /* Master/Slave Capabilities */
+ SK_U8 PMSMode; /* Master/Slave Mode */
+ SK_U8 PMSStatus; /* Master/Slave Status */
+ SK_U8 PAutoNegFail; /* Auto-negotiation fail flag */
+ SK_U8 PLipaAutoNeg; /* Auto-negotiation possible with Link Partner */
+ SK_U8 PCableLen; /* Cable Length */
+ SK_U8 PMdiPairLen[4]; /* MDI[0..3] Pair Length */
+ SK_U8 PMdiPairSts[4]; /* MDI[0..3] Pair Diagnostic Status */
+} SK_GEPORT;
+
+/*
+ * Gigabit Ethernet Initialization Struct
+ * (has to be included in the adapter context)
+ */
+typedef struct s_GeInit {
+ SK_U8 GIPciHwRev; /* PCI HW Revision Number */
+ SK_U8 GIChipId; /* Chip Identification Number */
+ SK_U8 GIChipRev; /* Chip Revision Number */
+ SK_BOOL GIGenesis; /* Genesis adapter ? */
+ SK_BOOL GICopperType; /* Copper Type adapter ? */
+ SK_BOOL GIPciSlot64; /* 64-bit PCI Slot */
+ SK_BOOL GIPciClock66; /* 66 MHz PCI Clock */
+ SK_BOOL GIVauxAvail; /* VAUX available (YUKON) */
+ SK_BOOL GIYukon32Bit; /* 32-Bit YUKON adapter */
+ SK_BOOL GIYukonLite; /* YUKON-Lite chip */
+ int GIMacsFound; /* Number of MACs found on this adapter */
+ int GIMacType; /* MAC Type used on this adapter */
+ int GIHstClkFact; /* Host Clock Factor (62.5 / HstClk * 100) */
+ int GIPortUsage; /* Driver Port Usage */
+ int GILevel; /* Initialization Level completed */
+ int GIRamSize; /* The RAM size of the adapter in kB */
+ int GIWolOffs; /* WOL Register Offset (HW-Bug in Rev. A) */
+ SK_U32 GIRamOffs; /* RAM Address Offset for addr calculation */
+ SK_U32 GIPollTimerVal; /* Descr. Poll Timer Init Val (HstClk ticks) */
+ SK_GEPORT GP[SK_MAX_MACS];/* Port Dependent Information */
+ SK_GEMACFUNC GIFunc; /* MAC depedent functions */
+} SK_GEINIT;
+
+/*
+ * Error numbers and messages for skxmac2.c and skgeinit.c
+ */
+#define SKERR_HWI_E001 (SK_ERRBASE_HWINIT)
+#define SKERR_HWI_E001MSG "SkXmClrExactAddr() has got illegal parameters"
+#define SKERR_HWI_E002 (SKERR_HWI_E001+1)
+#define SKERR_HWI_E002MSG "SkGeInit(): Level 1 call missing"
+#define SKERR_HWI_E003 (SKERR_HWI_E002+1)
+#define SKERR_HWI_E003MSG "SkGeInit() called with illegal init Level"
+#define SKERR_HWI_E004 (SKERR_HWI_E003+1)
+#define SKERR_HWI_E004MSG "SkGeInitPort(): Queue Size illegal configured"
+#define SKERR_HWI_E005 (SKERR_HWI_E004+1)
+#define SKERR_HWI_E005MSG "SkGeInitPort(): cannot init running ports"
+#define SKERR_HWI_E006 (SKERR_HWI_E005+1)
+#define SKERR_HWI_E006MSG "SkGeMacInit(): PState does not match HW state"
+#define SKERR_HWI_E007 (SKERR_HWI_E006+1)
+#define SKERR_HWI_E007MSG "SkXmInitDupMd() called with invalid Dup Mode"
+#define SKERR_HWI_E008 (SKERR_HWI_E007+1)
+#define SKERR_HWI_E008MSG "SkXmSetRxCmd() called with invalid Mode"
+#define SKERR_HWI_E009 (SKERR_HWI_E008+1)
+#define SKERR_HWI_E009MSG "SkGeCfgSync() called although PXSQSize zero"
+#define SKERR_HWI_E010 (SKERR_HWI_E009+1)
+#define SKERR_HWI_E010MSG "SkGeCfgSync() called with invalid parameters"
+#define SKERR_HWI_E011 (SKERR_HWI_E010+1)
+#define SKERR_HWI_E011MSG "SkGeInitPort(): Receive Queue Size too small"
+#define SKERR_HWI_E012 (SKERR_HWI_E011+1)
+#define SKERR_HWI_E012MSG "SkGeInitPort(): invalid Queue Size specified"
+#define SKERR_HWI_E013 (SKERR_HWI_E012+1)
+#define SKERR_HWI_E013MSG "SkGeInitPort(): cfg changed for running queue"
+#define SKERR_HWI_E014 (SKERR_HWI_E013+1)
+#define SKERR_HWI_E014MSG "SkGeInitPort(): unknown GIPortUsage specified"
+#define SKERR_HWI_E015 (SKERR_HWI_E014+1)
+#define SKERR_HWI_E015MSG "Illegal Link mode parameter"
+#define SKERR_HWI_E016 (SKERR_HWI_E015+1)
+#define SKERR_HWI_E016MSG "Illegal Flow control mode parameter"
+#define SKERR_HWI_E017 (SKERR_HWI_E016+1)
+#define SKERR_HWI_E017MSG "Illegal value specified for GIPollTimerVal"
+#define SKERR_HWI_E018 (SKERR_HWI_E017+1)
+#define SKERR_HWI_E018MSG "FATAL: SkGeStopPort() does not terminate (Tx)"
+#define SKERR_HWI_E019 (SKERR_HWI_E018+1)
+#define SKERR_HWI_E019MSG "Illegal Speed parameter"
+#define SKERR_HWI_E020 (SKERR_HWI_E019+1)
+#define SKERR_HWI_E020MSG "Illegal Master/Slave parameter"
+#define SKERR_HWI_E021 (SKERR_HWI_E020+1)
+#define SKERR_HWI_E021MSG "MacUpdateStats(): cannot update statistic counter"
+#define SKERR_HWI_E022 (SKERR_HWI_E021+1)
+#define SKERR_HWI_E022MSG "MacStatistic(): illegal statistic base address"
+#define SKERR_HWI_E023 (SKERR_HWI_E022+1)
+#define SKERR_HWI_E023MSG "SkGeInitPort(): Transmit Queue Size too small"
+#define SKERR_HWI_E024 (SKERR_HWI_E023+1)
+#define SKERR_HWI_E024MSG "FATAL: SkGeStopPort() does not terminate (Rx)"
+#define SKERR_HWI_E025 (SKERR_HWI_E024+1)
+#define SKERR_HWI_E025MSG ""
+
+/* function prototypes ********************************************************/
+
+#ifndef SK_KR_PROTO
+
+/*
+ * public functions in skgeinit.c
+ */
+extern void SkGePollRxD(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL PollRxD);
+
+extern void SkGePollTxD(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL PollTxD);
+
+extern void SkGeYellowLED(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int State);
+
+extern int SkGeCfgSync(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_U32 IntTime,
+ SK_U32 LimCount,
+ int SyncMode);
+
+extern void SkGeLoadLnkSyncCnt(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_U32 CntVal);
+
+extern void SkGeStopPort(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Dir,
+ int RstMode);
+
+extern int SkGeInit(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Level);
+
+extern void SkGeDeInit(
+ SK_AC *pAC,
+ SK_IOC IoC);
+
+extern int SkGeInitPort(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkGeXmitLED(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Led,
+ int Mode);
+
+extern void SkGeInitRamIface(
+ SK_AC *pAC,
+ SK_IOC IoC);
+
+extern int SkGeInitAssignRamToQueues(
+ SK_AC *pAC,
+ int ActivePort,
+ SK_BOOL DualNet);
+
+/*
+ * public functions in skxmac2.c
+ */
+extern void SkMacRxTxDisable(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacSoftRst(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacHardRst(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkXmInitMac(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkGmInitMac(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacInitPhy(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL DoLoop);
+
+extern void SkMacIrqDisable(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacFlushTxFifo(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacFlushRxFifo(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacIrq(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern int SkMacAutoNegDone(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacAutoNegLipaPhy(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_U16 IStatus);
+
+extern void SkMacSetRxTxEn(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Para);
+
+extern int SkMacRxTxEnable(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkMacPromiscMode(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL Enable);
+
+extern void SkMacHashing(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL Enable);
+
+extern void SkXmPhyRead(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Addr,
+ SK_U16 *pVal);
+
+extern void SkXmPhyWrite(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Addr,
+ SK_U16 Val);
+
+extern void SkGmPhyRead(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Addr,
+ SK_U16 *pVal);
+
+extern void SkGmPhyWrite(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Addr,
+ SK_U16 Val);
+
+extern void SkGePhyRead(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Addr,
+ SK_U16 *pVal);
+
+extern void SkGePhyWrite(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Addr,
+ SK_U16 Val);
+
+extern void SkXmClrExactAddr(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int StartNum,
+ int StopNum);
+
+extern void SkXmInitDupMd(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkXmInitPauseMd(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port);
+
+extern void SkXmAutoNegLipaXmac(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_U16 IStatus);
+
+extern int SkXmUpdateStats(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port);
+
+extern int SkGmUpdateStats(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port);
+
+extern int SkXmMacStatistic(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port,
+ SK_U16 StatAddr,
+ SK_U32 *pVal);
+
+extern int SkGmMacStatistic(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port,
+ SK_U16 StatAddr,
+ SK_U32 *pVal);
+
+extern int SkXmResetCounter(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port);
+
+extern int SkGmResetCounter(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port);
+
+extern int SkXmOverflowStatus(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port,
+ SK_U16 IStatus,
+ SK_U64 *pStatus);
+
+extern int SkGmOverflowStatus(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ unsigned int Port,
+ SK_U16 MacStatus,
+ SK_U64 *pStatus);
+
+extern int SkGmCableDiagStatus(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL StartTest);
+
+#ifdef SK_DIAG
+extern void SkMacSetRxCmd(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ int Mode);
+extern void SkMacCrcGener(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL Enable);
+extern void SkMacTimeStamp(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL Enable);
+extern void SkXmSendCont(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Port,
+ SK_BOOL Enable);
+#endif /* SK_DIAG */
+
+#else /* SK_KR_PROTO */
+
+/*
+ * public functions in skgeinit.c
+ */
+extern void SkGePollRxD();
+extern void SkGePollTxD();
+extern void SkGeYellowLED();
+extern int SkGeCfgSync();
+extern void SkGeLoadLnkSyncCnt();
+extern void SkGeStopPort();
+extern int SkGeInit();
+extern void SkGeDeInit();
+extern int SkGeInitPort();
+extern void SkGeXmitLED();
+extern void SkGeInitRamIface();
+extern int SkGeInitAssignRamToQueues();
+
+/*
+ * public functions in skxmac2.c
+ */
+extern void SkMacRxTxDisable();
+extern void SkMacSoftRst();
+extern void SkMacHardRst();
+extern void SkMacInitPhy();
+extern int SkMacRxTxEnable();
+extern void SkMacPromiscMode();
+extern void SkMacHashing();
+extern void SkMacIrqDisable();
+extern void SkMacFlushTxFifo();
+extern void SkMacFlushRxFifo();
+extern void SkMacIrq();
+extern int SkMacAutoNegDone();
+extern void SkMacAutoNegLipaPhy();
+extern void SkMacSetRxTxEn();
+extern void SkGePhyRead();
+extern void SkGePhyWrite();
+extern void SkXmInitMac();
+extern void SkXmPhyRead();
+extern void SkXmPhyWrite();
+extern void SkGmInitMac();
+extern void SkGmPhyRead();
+extern void SkGmPhyWrite();
+extern void SkXmClrExactAddr();
+extern void SkXmInitDupMd();
+extern void SkXmInitPauseMd();
+extern void SkXmAutoNegLipaXmac();
+extern int SkXmUpdateStats();
+extern int SkGmUpdateStats();
+extern int SkXmMacStatistic();
+extern int SkGmMacStatistic();
+extern int SkXmResetCounter();
+extern int SkGmResetCounter();
+extern int SkXmOverflowStatus();
+extern int SkGmOverflowStatus();
+extern int SkGmCableDiagStatus();
+
+#ifdef SK_DIAG
+extern void SkMacSetRxCmd();
+extern void SkMacCrcGener();
+extern void SkMacTimeStamp();
+extern void SkXmSendCont();
+#endif /* SK_DIAG */
+
+#endif /* SK_KR_PROTO */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INC_SKGEINIT_H_ */
diff --git a/drivers/net/sk98lin/h/skgepnm2.h b/drivers/net/sk98lin/h/skgepnm2.h
new file mode 100644
index 0000000..5c44f47
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgepnm2.h
@@ -0,0 +1,462 @@
+/*****************************************************************************
+ *
+ * Name: skgepnm2.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.34 $
+ * Date: $Date: 2002/12/16 09:05:18 $
+ * Purpose: Defines for Private Network Management Interface
+ *
+ ****************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgepnm2.h,v $
+ * Revision 1.34 2002/12/16 09:05:18 tschilli
+ * Code for VCT handling added.
+ *
+ * Revision 1.33 2002/09/10 09:00:03 rwahl
+ * Adapted boolean definitions according sktypes.
+ *
+ * Revision 1.32 2002/08/09 09:47:01 rwahl
+ * Added write-only flag to oid access defines.
+ * Editorial changes.
+ *
+ * Revision 1.31 2002/07/17 19:23:18 rwahl
+ * - Replaced MAC counter definitions by enumeration.
+ * - Added definition SK_PNMI_MAC_TYPES.
+ * - Added chipset defnition for Yukon.
+ *
+ * Revision 1.30 2001/02/06 10:03:41 mkunz
+ * - Pnmi V4 dual net support added. Interface functions and macros extended
+ * - Vpd bug fixed
+ * - OID_SKGE_MTU added
+ *
+ * Revision 1.29 2001/01/22 13:41:37 rassmann
+ * Supporting two nets on dual-port adapters.
+ *
+ * Revision 1.28 2000/08/03 15:12:48 rwahl
+ * - Additional comment for MAC statistic data structure.
+ *
+ * Revision 1.27 2000/08/01 16:10:18 rwahl
+ * - Added mac statistic data structure for StatRxLongFrame counter.
+ *
+ * Revision 1.26 2000/03/31 13:51:34 rwahl
+ * Added SK_UPTR cast to offset calculation for PNMI struct fields;
+ * missing cast caused compiler warnings by Win64 compiler.
+ *
+ * Revision 1.25 1999/11/22 13:57:41 cgoos
+ * Changed license header to GPL.
+ * Allowing overwrite for SK_PNMI_STORE/_READ defines.
+ *
+ * Revision 1.24 1999/04/13 15:11:11 mhaveman
+ * Changed copyright.
+ *
+ * Revision 1.23 1999/01/28 15:07:12 mhaveman
+ * Changed default threshold for port switches per hour from 10
+ * to 240 which means 4 switches per minute. This fits better
+ * the granularity of 32 for the port switch estimate
+ * counter.
+ *
+ * Revision 1.22 1999/01/05 12:52:30 mhaveman
+ * Removed macro SK_PNMI_MICRO_SEC.
+ *
+ * Revision 1.21 1999/01/05 12:50:34 mhaveman
+ * Enlarged macro definition SK_PNMI_HUNDREDS_SEC() so that no 64-bit
+ * arithmetic is necessary if SK_TICKS_PER_SEC is 100.
+ *
+ * Revision 1.20 1998/12/09 14:02:53 mhaveman
+ * Defined macro SK_PNMI_DEF_RLMT_CHG_THRES for default port switch
+ * threshold.
+ *
+ * Revision 1.19 1998/12/03 11:28:41 mhaveman
+ * Removed SK_PNMI_CHECKPTR macro.
+ *
+ * Revision 1.18 1998/12/03 11:21:00 mhaveman
+ * -Added pointer check macro SK_PNMI_CHECKPTR
+ * -Added macros SK_PNMI_VPD_ARR_SIZE and SK_PNMI_VPD_STR_SIZE for
+ * VPD key evaluation.
+ *
+ * Revision 1.17 1998/11/20 13:20:33 mhaveman
+ * Fixed bug in SK_PNMI_SET_STAT macro. ErrorStatus was not correctly set.
+ *
+ * Revision 1.16 1998/11/20 08:08:49 mhaveman
+ * Macro SK_PNMI_CHECKFLAGS has got a if clause.
+ *
+ * Revision 1.15 1998/11/03 13:53:40 mhaveman
+ * Fixed alignment problem in macor SK_PNMI_SET_STAT macro.
+ *
+ * Revision 1.14 1998/10/30 15:50:13 mhaveman
+ * Added macro SK_PNMI_MICRO_SEC()
+ *
+ * Revision 1.13 1998/10/30 12:32:20 mhaveman
+ * Added forgotten cast in SK_PNMI_READ_U32 macro.
+ *
+ * Revision 1.12 1998/10/29 15:40:26 mhaveman
+ * -Changed SK_PNMI_TRAP_SENSOR_LEN because SensorDescr has now
+ * variable string length.
+ * -Defined SK_PNMI_CHECKFLAGS macro
+ *
+ * Revision 1.11 1998/10/29 08:53:34 mhaveman
+ * Removed SK_PNMI_RLM_XXX table indexed because these counters need
+ * not been saved over XMAC resets.
+ *
+ * Revision 1.10 1998/10/28 08:48:20 mhaveman
+ * -Added macros for storage according to alignment
+ * -Changed type of Instance to SK_U32 because of VPD
+ * -Removed trap structures. Not needed because of alignment problem
+ * -Changed type of Action form SK_U8 to int
+ *
+ * Revision 1.9 1998/10/21 13:34:45 mhaveman
+ * Shit, mismatched calculation of SK_PNMI_HUNDREDS_SEC. Corrected.
+ *
+ * Revision 1.8 1998/10/21 13:24:58 mhaveman
+ * Changed calculation of hundreds of seconds.
+ *
+ * Revision 1.7 1998/10/20 07:31:41 mhaveman
+ * Made type changes to unsigned int where possible.
+ *
+ * Revision 1.6 1998/09/04 17:04:05 mhaveman
+ * Added Sync counters to offset storage to provided settled values on
+ * port switch.
+ *
+ * Revision 1.5 1998/09/04 12:45:35 mhaveman
+ * Removed dummies for SK_DRIVER_ macros. They should be added by driver
+ * writer in skdrv2nd.h.
+ *
+ * Revision 1.4 1998/09/04 11:59:50 mhaveman
+ * Everything compiles now. Driver Macros for counting still missing.
+ *
+ * Revision 1.3 1998/08/24 12:01:35 mhaveman
+ * Intermediate state.
+ *
+ * Revision 1.2 1998/08/17 07:51:40 mhaveman
+ * Intermediate state.
+ *
+ * Revision 1.1 1998/08/11 09:08:40 mhaveman
+ * Intermediate state.
+ *
+ ****************************************************************************/
+
+#ifndef _SKGEPNM2_H_
+#define _SKGEPNM2_H_
+
+/*
+ * General definitions
+ */
+#define SK_PNMI_CHIPSET_XMAC 1 /* XMAC11800FP */
+#define SK_PNMI_CHIPSET_YUKON 2 /* YUKON */
+
+#define SK_PNMI_BUS_PCI 1 /* PCI bus*/
+
+/*
+ * Actions
+ */
+#define SK_PNMI_ACT_IDLE 1
+#define SK_PNMI_ACT_RESET 2
+#define SK_PNMI_ACT_SELFTEST 3
+#define SK_PNMI_ACT_RESETCNT 4
+
+/*
+ * VPD releated defines
+ */
+
+#define SK_PNMI_VPD_RW 1
+#define SK_PNMI_VPD_RO 2
+
+#define SK_PNMI_VPD_OK 0
+#define SK_PNMI_VPD_NOTFOUND 1
+#define SK_PNMI_VPD_CUT 2
+#define SK_PNMI_VPD_TIMEOUT 3
+#define SK_PNMI_VPD_FULL 4
+#define SK_PNMI_VPD_NOWRITE 5
+#define SK_PNMI_VPD_FATAL 6
+
+#define SK_PNMI_VPD_IGNORE 0
+#define SK_PNMI_VPD_CREATE 1
+#define SK_PNMI_VPD_DELETE 2
+
+
+/*
+ * RLMT related defines
+ */
+#define SK_PNMI_DEF_RLMT_CHG_THRES 240 /* 4 changes per minute */
+
+
+/*
+ * VCT internal status values
+ */
+#define SK_PNMI_VCT_PENDING 32
+#define SK_PNMI_VCT_TEST_DONE 64
+#define SK_PNMI_VCT_LINK 128
+
+/*
+ * Internal table definitions
+ */
+#define SK_PNMI_GET 0
+#define SK_PNMI_PRESET 1
+#define SK_PNMI_SET 2
+
+#define SK_PNMI_RO 0
+#define SK_PNMI_RW 1
+#define SK_PNMI_WO 2
+
+typedef struct s_OidTabEntry {
+ SK_U32 Id;
+ SK_U32 InstanceNo;
+ unsigned int StructSize;
+ unsigned int Offset;
+ int Access;
+ int (* Func)(SK_AC *pAc, SK_IOC pIo, int action,
+ SK_U32 Id, char* pBuf, unsigned int* pLen,
+ SK_U32 Instance, unsigned int TableIndex,
+ SK_U32 NetNumber);
+ SK_U16 Param;
+} SK_PNMI_TAB_ENTRY;
+
+
+/*
+ * Trap lengths
+ */
+#define SK_PNMI_TRAP_SIMPLE_LEN 17
+#define SK_PNMI_TRAP_SENSOR_LEN_BASE 46
+#define SK_PNMI_TRAP_RLMT_CHANGE_LEN 23
+#define SK_PNMI_TRAP_RLMT_PORT_LEN 23
+
+/*
+ * Number of MAC types supported
+ */
+#define SK_PNMI_MAC_TYPES (SK_MAC_GMAC + 1)
+
+/*
+ * MAC statistic data list (overall set for MAC types used)
+ */
+enum SK_MACSTATS {
+ SK_PNMI_HTX = 0,
+ SK_PNMI_HTX_OCTET,
+ SK_PNMI_HTX_OCTETHIGH = SK_PNMI_HTX_OCTET,
+ SK_PNMI_HTX_OCTETLOW,
+ SK_PNMI_HTX_BROADCAST,
+ SK_PNMI_HTX_MULTICAST,
+ SK_PNMI_HTX_UNICAST,
+ SK_PNMI_HTX_BURST,
+ SK_PNMI_HTX_PMACC,
+ SK_PNMI_HTX_MACC,
+ SK_PNMI_HTX_COL,
+ SK_PNMI_HTX_SINGLE_COL,
+ SK_PNMI_HTX_MULTI_COL,
+ SK_PNMI_HTX_EXCESS_COL,
+ SK_PNMI_HTX_LATE_COL,
+ SK_PNMI_HTX_DEFFERAL,
+ SK_PNMI_HTX_EXCESS_DEF,
+ SK_PNMI_HTX_UNDERRUN,
+ SK_PNMI_HTX_CARRIER,
+ SK_PNMI_HTX_UTILUNDER,
+ SK_PNMI_HTX_UTILOVER,
+ SK_PNMI_HTX_64,
+ SK_PNMI_HTX_127,
+ SK_PNMI_HTX_255,
+ SK_PNMI_HTX_511,
+ SK_PNMI_HTX_1023,
+ SK_PNMI_HTX_MAX,
+ SK_PNMI_HTX_LONGFRAMES,
+ SK_PNMI_HTX_SYNC,
+ SK_PNMI_HTX_SYNC_OCTET,
+ SK_PNMI_HTX_RESERVED,
+
+ SK_PNMI_HRX,
+ SK_PNMI_HRX_OCTET,
+ SK_PNMI_HRX_OCTETHIGH = SK_PNMI_HRX_OCTET,
+ SK_PNMI_HRX_OCTETLOW,
+ SK_PNMI_HRX_BADOCTET,
+ SK_PNMI_HRX_BADOCTETHIGH = SK_PNMI_HRX_BADOCTET,
+ SK_PNMI_HRX_BADOCTETLOW,
+ SK_PNMI_HRX_BROADCAST,
+ SK_PNMI_HRX_MULTICAST,
+ SK_PNMI_HRX_UNICAST,
+ SK_PNMI_HRX_PMACC,
+ SK_PNMI_HRX_MACC,
+ SK_PNMI_HRX_PMACC_ERR,
+ SK_PNMI_HRX_MACC_UNKWN,
+ SK_PNMI_HRX_BURST,
+ SK_PNMI_HRX_MISSED,
+ SK_PNMI_HRX_FRAMING,
+ SK_PNMI_HRX_UNDERSIZE,
+ SK_PNMI_HRX_OVERFLOW,
+ SK_PNMI_HRX_JABBER,
+ SK_PNMI_HRX_CARRIER,
+ SK_PNMI_HRX_IRLENGTH,
+ SK_PNMI_HRX_SYMBOL,
+ SK_PNMI_HRX_SHORTS,
+ SK_PNMI_HRX_RUNT,
+ SK_PNMI_HRX_TOO_LONG,
+ SK_PNMI_HRX_FCS,
+ SK_PNMI_HRX_CEXT,
+ SK_PNMI_HRX_UTILUNDER,
+ SK_PNMI_HRX_UTILOVER,
+ SK_PNMI_HRX_64,
+ SK_PNMI_HRX_127,
+ SK_PNMI_HRX_255,
+ SK_PNMI_HRX_511,
+ SK_PNMI_HRX_1023,
+ SK_PNMI_HRX_MAX,
+ SK_PNMI_HRX_LONGFRAMES,
+
+ SK_PNMI_HRX_RESERVED,
+
+ SK_PNMI_MAX_IDX /* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */
+};
+
+/*
+ * MAC specific data
+ */
+typedef struct s_PnmiStatAddr {
+ SK_U16 Reg; /* MAC register containing the value */
+ SK_BOOL GetOffset; /* TRUE: Offset managed by PNMI (call GetStatVal())*/
+} SK_PNMI_STATADDR;
+
+
+/*
+ * SK_PNMI_STRUCT_DATA copy offset evaluation macros
+ */
+#define SK_PNMI_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e))
+#define SK_PNMI_MAI_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e))
+#define SK_PNMI_VPD_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_VPD *)0)->e))
+#define SK_PNMI_SEN_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_SENSOR *)0)->e))
+#define SK_PNMI_CHK_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_CHECKSUM *)0)->e))
+#define SK_PNMI_STA_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STAT *)0)->e))
+#define SK_PNMI_CNF_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_CONF *)0)->e))
+#define SK_PNMI_RLM_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT *)0)->e))
+#define SK_PNMI_MON_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT_MONITOR *)0)->e))
+#define SK_PNMI_TRP_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_TRAP *)0)->e))
+
+#define SK_PNMI_SET_STAT(b,s,o) {SK_U32 Val32; char *pVal; \
+ Val32 = (s); \
+ pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \
+ &(((SK_PNMI_STRUCT_DATA *)0)-> \
+ ReturnStatus.ErrorStatus)); \
+ SK_PNMI_STORE_U32(pVal, Val32); \
+ Val32 = (o); \
+ pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \
+ &(((SK_PNMI_STRUCT_DATA *)0)-> \
+ ReturnStatus.ErrorOffset)); \
+ SK_PNMI_STORE_U32(pVal, Val32);}
+
+/*
+ * Time macros
+ */
+#if SK_TICKS_PER_SEC == 100
+#define SK_PNMI_HUNDREDS_SEC(t) (t)
+#else
+#define SK_PNMI_HUNDREDS_SEC(t) (((t) * 100) / (SK_TICKS_PER_SEC))
+#endif
+
+/*
+ * Macros to work around alignment problems
+ */
+#ifndef SK_PNMI_STORE_U16
+#define SK_PNMI_STORE_U16(p,v) {*(char *)(p) = *((char *)&(v)); \
+ *((char *)(p) + 1) = \
+ *(((char *)&(v)) + 1);}
+#endif
+
+#ifndef SK_PNMI_STORE_U32
+#define SK_PNMI_STORE_U32(p,v) {*(char *)(p) = *((char *)&(v)); \
+ *((char *)(p) + 1) = \
+ *(((char *)&(v)) + 1); \
+ *((char *)(p) + 2) = \
+ *(((char *)&(v)) + 2); \
+ *((char *)(p) + 3) = \
+ *(((char *)&(v)) + 3);}
+#endif
+
+#ifndef SK_PNMI_STORE_U64
+#define SK_PNMI_STORE_U64(p,v) {*(char *)(p) = *((char *)&(v)); \
+ *((char *)(p) + 1) = \
+ *(((char *)&(v)) + 1); \
+ *((char *)(p) + 2) = \
+ *(((char *)&(v)) + 2); \
+ *((char *)(p) + 3) = \
+ *(((char *)&(v)) + 3); \
+ *((char *)(p) + 4) = \
+ *(((char *)&(v)) + 4); \
+ *((char *)(p) + 5) = \
+ *(((char *)&(v)) + 5); \
+ *((char *)(p) + 6) = \
+ *(((char *)&(v)) + 6); \
+ *((char *)(p) + 7) = \
+ *(((char *)&(v)) + 7);}
+#endif
+
+#ifndef SK_PNMI_READ_U16
+#define SK_PNMI_READ_U16(p,v) {*((char *)&(v)) = *(char *)(p); \
+ *(((char *)&(v)) + 1) = \
+ *((char *)(p) + 1);}
+#endif
+
+#ifndef SK_PNMI_READ_U32
+#define SK_PNMI_READ_U32(p,v) {*((char *)&(v)) = *(char *)(p); \
+ *(((char *)&(v)) + 1) = \
+ *((char *)(p) + 1); \
+ *(((char *)&(v)) + 2) = \
+ *((char *)(p) + 2); \
+ *(((char *)&(v)) + 3) = \
+ *((char *)(p) + 3);}
+#endif
+
+#ifndef SK_PNMI_READ_U64
+#define SK_PNMI_READ_U64(p,v) {*((char *)&(v)) = *(char *)(p); \
+ *(((char *)&(v)) + 1) = \
+ *((char *)(p) + 1); \
+ *(((char *)&(v)) + 2) = \
+ *((char *)(p) + 2); \
+ *(((char *)&(v)) + 3) = \
+ *((char *)(p) + 3); \
+ *(((char *)&(v)) + 4) = \
+ *((char *)(p) + 4); \
+ *(((char *)&(v)) + 5) = \
+ *((char *)(p) + 5); \
+ *(((char *)&(v)) + 6) = \
+ *((char *)(p) + 6); \
+ *(((char *)&(v)) + 7) = \
+ *((char *)(p) + 7);}
+#endif
+
+/*
+ * Macros for Debug
+ */
+#ifdef DEBUG
+
+#define SK_PNMI_CHECKFLAGS(vSt) {if (pAC->Pnmi.MacUpdatedFlag > 0 || \
+ pAC->Pnmi.RlmtUpdatedFlag > 0 || \
+ pAC->Pnmi.SirqUpdatedFlag > 0) { \
+ SK_DBG_MSG(pAC, \
+ SK_DBGMOD_PNMI, \
+ SK_DBGCAT_CTRL, \
+ ("PNMI: ERR: %s MacUFlag=%d, RlmtUFlag=%d, SirqUFlag=%d\n", \
+ vSt, \
+ pAC->Pnmi.MacUpdatedFlag, \
+ pAC->Pnmi.RlmtUpdatedFlag, \
+ pAC->Pnmi.SirqUpdatedFlag))}}
+
+#else /* !DEBUG */
+
+#define SK_PNMI_CHECKFLAGS(vSt) /* Nothing */
+
+#endif /* !DEBUG */
+
+#endif /* _SKGEPNM2_H_ */
diff --git a/drivers/net/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h
new file mode 100644
index 0000000..7532313
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgepnmi.h
@@ -0,0 +1,1114 @@
+/*****************************************************************************
+ *
+ * Name: skgepnmi.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.59 $
+ * Date: $Date: 2002/12/16 14:03:50 $
+ * Purpose: Defines for Private Network Management Interface
+ *
+ ****************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgepnmi.h,v $
+ * Revision 1.59 2002/12/16 14:03:50 tschilli
+ * New defines for VCT added.
+ *
+ * Revision 1.58 2002/12/16 09:04:59 tschilli
+ * Code for VCT handling added.
+ *
+ * Revision 1.57 2002/09/26 12:41:05 tschilli
+ * SK_PNMI_PORT BufPort entry in struct SK_PNMI added.
+ *
+ * Revision 1.56 2002/08/16 11:10:41 rwahl
+ * - Replaced c++ comment.
+ *
+ * Revision 1.55 2002/08/09 15:40:21 rwahl
+ * Editorial change (renamed ConfSpeedCap).
+ *
+ * Revision 1.54 2002/08/09 11:06:07 rwahl
+ * Added OID_SKGE_SPEED_CAP.
+ *
+ * Revision 1.53 2002/08/09 09:45:28 rwahl
+ * Added support for NDIS OID_PNP_xxx.
+ * Editorial changes.
+ *
+ * Revision 1.52 2002/08/06 17:54:07 rwahl
+ * - Added speed cap to PNMI config struct.
+ *
+ * Revision 1.51 2002/07/17 19:19:26 rwahl
+ * - Added OID_SKGE_SPEED_MODE and OID_SKGE_SPEED_STATUS.
+ * - Added SK_PNMI_CNT_RX_PMACC_ERR() & SK_PNMI_CNT_RX_LONGFRAMES().
+ * - Added speed mode & status to PNMI config struct.
+ * - Editorial changes.
+ *
+ * Revision 1.50 2002/05/22 08:59:37 rwahl
+ * Added string definitions for error msgs.
+ *
+ * Revision 1.49 2001/11/20 09:23:50 rwahl
+ * - pnmi struct: reordered and aligned to 32bit.
+ *
+ * Revision 1.48 2001/02/23 14:34:24 mkunz
+ * Changed macro PHYS2INST. Added pAC to Interface
+ *
+ * Revision 1.47 2001/02/07 08:28:23 mkunz
+ * - Added Oids: OID_SKGE_DIAG_ACTION
+ * OID_SKGE_DIAG_RESULT
+ * OID_SKGE_MULTICAST_LIST
+ * OID_SKGE_CURRENT_PACKET_FILTER
+ * OID_SKGE_INTERMEDIATE_SUPPORT
+ * - Changed value of OID_SKGE_MTU
+ *
+ * Revision 1.46 2001/02/06 10:01:41 mkunz
+ * - Pnmi V4 dual net support added. Interface functions and macros extended
+ * - Vpd bug fixed
+ * - OID_SKGE_MTU added
+ *
+ * Revision 1.45 2001/01/22 13:41:37 rassmann
+ * Supporting two nets on dual-port adapters.
+ *
+ * Revision 1.44 2000/09/07 07:35:27 rwahl
+ * - removed NDIS counter specific data type.
+ * - fixed spelling for OID_SKGE_RLMT_PORT_PREFERRED.
+ *
+ * Revision 1.43 2000/08/04 11:41:08 rwahl
+ * - Fixed compiler warning (port is always >= 0) for macros
+ * SK_PNMI_CNT_RX_LONGFRAMES & SK_PNMI_CNT_SYNC_OCTETS
+ *
+ * Revision 1.42 2000/08/03 15:14:07 rwahl
+ * - Corrected error in driver macros addressing a physical port.
+ *
+ * Revision 1.41 2000/08/01 16:22:29 rwahl
+ * - Changed MDB version to 3.1.
+ * - Added definitions for StatRxLongFrames counter.
+ * - Added macro to be used by driver to count long frames received.
+ * - Added directive to control width (default = 32bit) of NDIS statistic
+ * counters (SK_NDIS_64BIT_CTR).
+ *
+ * Revision 1.40 2000/03/31 13:51:34 rwahl
+ * Added SK_UPTR cast to offset calculation for PNMI struct fields;
+ * missing cast caused compiler warnings by Win64 compiler.
+ *
+ * Revision 1.39 1999/12/06 10:09:47 rwahl
+ * Added new error log message.
+ *
+ * Revision 1.38 1999/11/22 13:57:55 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.37 1999/09/14 14:25:32 rwahl
+ * Set MDB version for 1000Base-T (sensors, Master/Slave) changes.
+ *
+ * Revision 1.36 1999/05/20 09:24:56 cgoos
+ * Changes for 1000Base-T (sensors, Master/Slave).
+ *
+ * Revision 1.35 1999/04/13 15:10:51 mhaveman
+ * Replaced RLMT macros SK_RLMT_CHECK_xxx again by those of PNMI to
+ * grant unified interface. But PNMI macros will store the same
+ * value as RLMT macros.
+ *
+ * Revision 1.34 1999/04/13 15:03:49 mhaveman
+ * -Changed copyright
+ * -Removed SK_PNMI_RLMT_MODE_CHK_xxx macros. Those of RLMT should be
+ * used.
+ *
+ * Revision 1.33 1999/03/23 10:41:02 mhaveman
+ * Changed comments.
+ *
+ * Revision 1.32 1999/01/25 15:01:33 mhaveman
+ * Added support for multiple simultaniously active ports.
+ *
+ * Revision 1.31 1999/01/19 10:06:26 mhaveman
+ * Added new error log message.
+ *
+ * Revision 1.30 1999/01/05 10:34:49 mhaveman
+ * Fixed little error in RlmtChangeEstimate calculation.
+ *
+ * Revision 1.29 1999/01/05 09:59:41 mhaveman
+ * Redesigned port switch average calculation to avoid 64bit
+ * arithmetic.
+ *
+ * Revision 1.28 1998/12/08 10:05:48 mhaveman
+ * Defined macro SK_PNMI_MIN_STRUCT_SIZE.
+ *
+ * Revision 1.27 1998/12/03 14:39:35 mhaveman
+ * Fixed problem that LSTAT was enumerated wrong.
+ *
+ * Revision 1.26 1998/12/03 11:19:51 mhaveman
+ * Changed contents of errlog message SK_PNMI_ERR016MSG
+ *
+ * Revision 1.25 1998/12/01 10:40:04 mhaveman
+ * Changed size of SensorNumber, ChecksumNumber and RlmtPortNumber in
+ * SK_PNMI_STRUCT_DATA to be conform with OID definition.
+ *
+ * Revision 1.24 1998/11/20 08:09:27 mhaveman
+ * Added macros to convert between logical, physical port indexes and
+ * instances.
+ *
+ * Revision 1.23 1998/11/10 13:41:13 mhaveman
+ * Needed to change interface, because NT driver needs a return value
+ * of needed buffer space on TOO_SHORT errors. Therefore all
+ * SkPnmiGet/Preset/Set functions now have a pointer to the length
+ * parameter, where the needed space on error is returned.
+ *
+ * Revision 1.22 1998/11/03 12:05:51 mhaveman
+ * Added pAC parameter to counter macors.
+ *
+ * Revision 1.21 1998/11/02 10:47:36 mhaveman
+ * Added syslog messages for internal errors.
+ *
+ * Revision 1.20 1998/10/30 15:49:36 mhaveman
+ * -Removed unused SK_PNMI_UTILIZATION_BASE and EstOldCnt.
+ * -Redefined SK_PNMI_CHG_EST_BASE to hundreds of seconds.
+ *
+ * Revision 1.19 1998/10/29 15:38:44 mhaveman
+ * Changed string lengths of PNMI_STRUCT_DATA structure because
+ * string OIDs are now encoded with leading length ocetet.
+ *
+ * Revision 1.18 1998/10/29 08:52:27 mhaveman
+ * -Added byte to strings in PNMI_STRUCT_DATA structure.
+ * -Shortened SK_PNMI_RLMT structure to SK_MAX_MACS elements.
+ *
+ * Revision 1.17 1998/10/28 08:49:50 mhaveman
+ * -Changed type of Instance back to SK_U32 because of VPD
+ * -Changed type from SK_U8 to char of PciBusSpeed, PciBusWidth, PMD,
+ * and Connector.
+ *
+ * Revision 1.16 1998/10/22 10:42:31 mhaveman
+ * -Removed (SK_U32) casts for OIDs
+ * -excluded NDIS OIDs when they are already defined with ifndef _NDIS_
+ *
+ * Revision 1.15 1998/10/20 13:56:28 mhaveman
+ * Headerfile includes now directly other header files to comile correctly.
+ *
+ * Revision 1.14 1998/10/20 07:31:09 mhaveman
+ * Made type changes to unsigned int where possible.
+ *
+ * Revision 1.13 1998/10/19 10:53:13 mhaveman
+ * -Casted OID definitions to SK_U32
+ * -Renamed RlmtMAC... to RlmtPort...
+ * -Changed wrong type of VpdEntriesList from SK_U32 to char *
+ *
+ * Revision 1.12 1998/10/13 07:42:27 mhaveman
+ * -Added OIDs OID_SKGE_TRAP_NUMBER and OID_SKGE_ALL_DATA
+ * -Removed old cvs history entries
+ * -Renamed MacNumber to PortNumber
+ *
+ * Revision 1.11 1998/10/07 10:55:24 mhaveman
+ * -Added OID_MDB_VERSION. Therefore was a renumbering of the VPD OIDs
+ * necessary.
+ * -Added OID_GEN_ Ids to support the windows driver.
+ *
+ * Revision 1.10 1998/09/30 13:41:10 mhaveman
+ * Renamed some OIDs to reduce usage of 'MAC' which is replaced by 'PORT'.
+ *
+ * Revision 1.9 1998/09/04 17:06:17 mhaveman
+ * -Added SyncCounter as macro.
+ * -Renamed OID_SKGE_.._NO_DESCR_CTS to OID_SKGE_.._NO_BUF_CTS.
+ * -Added macros for driver description and version strings.
+ *
+ * Revision 1.8 1998/09/04 14:36:52 mhaveman
+ * Added OIDs and Structure to access value of macro counters which are
+ * counted by the driver.
+ *
+ * Revision 1.7 1998/09/04 11:59:36 mhaveman
+ * Everything compiles now. Driver Macros for counting still missing.
+ *
+ ****************************************************************************/
+
+#ifndef _SKGEPNMI_H_
+#define _SKGEPNMI_H_
+
+/*
+ * Include dependencies
+ */
+#include "h/sktypes.h"
+#include "h/skerror.h"
+#include "h/sktimer.h"
+#include "h/ski2c.h"
+#include "h/skaddr.h"
+#include "h/skrlmt.h"
+#include "h/skvpd.h"
+
+/*
+ * Management Database Version
+ */
+#define SK_PNMI_MDB_VERSION 0x00030001 /* 3.1 */
+
+
+/*
+ * Event definitions
+ */
+#define SK_PNMI_EVT_SIRQ_OVERFLOW 1 /* Counter overflow */
+#define SK_PNMI_EVT_SEN_WAR_LOW 2 /* Lower war thres exceeded */
+#define SK_PNMI_EVT_SEN_WAR_UPP 3 /* Upper war thres exceeded */
+#define SK_PNMI_EVT_SEN_ERR_LOW 4 /* Lower err thres exceeded */
+#define SK_PNMI_EVT_SEN_ERR_UPP 5 /* Upper err thres exceeded */
+#define SK_PNMI_EVT_CHG_EST_TIMER 6 /* Timer event for RLMT Chg */
+#define SK_PNMI_EVT_UTILIZATION_TIMER 7 /* Timer event for Utiliza. */
+#define SK_PNMI_EVT_CLEAR_COUNTER 8 /* Clear statistic counters */
+#define SK_PNMI_EVT_XMAC_RESET 9 /* XMAC will be reset */
+
+#define SK_PNMI_EVT_RLMT_PORT_UP 10 /* Port came logically up */
+#define SK_PNMI_EVT_RLMT_PORT_DOWN 11 /* Port went logically down */
+#define SK_PNMI_EVT_RLMT_SEGMENTATION 13 /* Two SP root bridges found */
+#define SK_PNMI_EVT_RLMT_ACTIVE_DOWN 14 /* Port went logically down */
+#define SK_PNMI_EVT_RLMT_ACTIVE_UP 15 /* Port came logically up */
+#define SK_PNMI_EVT_RLMT_SET_NETS 16 /* 1. Parameter is number of nets
+ 1 = single net; 2 = dual net */
+#define SK_PNMI_EVT_VCT_RESET 17 /* VCT port reset timer event started with SET. */
+
+
+/*
+ * Return values
+ */
+#define SK_PNMI_ERR_OK 0
+#define SK_PNMI_ERR_GENERAL 1
+#define SK_PNMI_ERR_TOO_SHORT 2
+#define SK_PNMI_ERR_BAD_VALUE 3
+#define SK_PNMI_ERR_READ_ONLY 4
+#define SK_PNMI_ERR_UNKNOWN_OID 5
+#define SK_PNMI_ERR_UNKNOWN_INST 6
+#define SK_PNMI_ERR_UNKNOWN_NET 7
+
+
+/*
+ * Return values of driver reset function SK_DRIVER_RESET() and
+ * driver event function SK_DRIVER_EVENT()
+ */
+#define SK_PNMI_ERR_OK 0
+#define SK_PNMI_ERR_FAIL 1
+
+
+/*
+ * Return values of driver test function SK_DRIVER_SELFTEST()
+ */
+#define SK_PNMI_TST_UNKNOWN (1 << 0)
+#define SK_PNMI_TST_TRANCEIVER (1 << 1)
+#define SK_PNMI_TST_ASIC (1 << 2)
+#define SK_PNMI_TST_SENSOR (1 << 3)
+#define SK_PNMI_TST_POWERMGMT (1 << 4)
+#define SK_PNMI_TST_PCI (1 << 5)
+#define SK_PNMI_TST_MAC (1 << 6)
+
+
+/*
+ * RLMT specific definitions
+ */
+#define SK_PNMI_RLMT_STATUS_STANDBY 1
+#define SK_PNMI_RLMT_STATUS_ACTIVE 2
+#define SK_PNMI_RLMT_STATUS_ERROR 3
+
+#define SK_PNMI_RLMT_LSTAT_PHY_DOWN 1
+#define SK_PNMI_RLMT_LSTAT_AUTONEG 2
+#define SK_PNMI_RLMT_LSTAT_LOG_DOWN 3
+#define SK_PNMI_RLMT_LSTAT_LOG_UP 4
+#define SK_PNMI_RLMT_LSTAT_INDETERMINATED 5
+
+#define SK_PNMI_RLMT_MODE_CHK_LINK (SK_RLMT_CHECK_LINK)
+#define SK_PNMI_RLMT_MODE_CHK_RX (SK_RLMT_CHECK_LOC_LINK)
+#define SK_PNMI_RLMT_MODE_CHK_SPT (SK_RLMT_CHECK_SEG)
+/* #define SK_PNMI_RLMT_MODE_CHK_EX */
+
+/*
+ * OID definition
+ */
+#ifndef _NDIS_ /* Check, whether NDIS already included OIDs */
+
+#define OID_GEN_XMIT_OK 0x00020101
+#define OID_GEN_RCV_OK 0x00020102
+#define OID_GEN_XMIT_ERROR 0x00020103
+#define OID_GEN_RCV_ERROR 0x00020104
+#define OID_GEN_RCV_NO_BUFFER 0x00020105
+
+/* #define OID_GEN_DIRECTED_BYTES_XMIT 0x00020201 */
+#define OID_GEN_DIRECTED_FRAMES_XMIT 0x00020202
+/* #define OID_GEN_MULTICAST_BYTES_XMIT 0x00020203 */
+#define OID_GEN_MULTICAST_FRAMES_XMIT 0x00020204
+/* #define OID_GEN_BROADCAST_BYTES_XMIT 0x00020205 */
+#define OID_GEN_BROADCAST_FRAMES_XMIT 0x00020206
+/* #define OID_GEN_DIRECTED_BYTES_RCV 0x00020207 */
+#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208
+/* #define OID_GEN_MULTICAST_BYTES_RCV 0x00020209 */
+#define OID_GEN_MULTICAST_FRAMES_RCV 0x0002020A
+/* #define OID_GEN_BROADCAST_BYTES_RCV 0x0002020B */
+#define OID_GEN_BROADCAST_FRAMES_RCV 0x0002020C
+#define OID_GEN_RCV_CRC_ERROR 0x0002020D
+#define OID_GEN_TRANSMIT_QUEUE_LENGTH 0x0002020E
+
+#define OID_802_3_PERMANENT_ADDRESS 0x01010101
+#define OID_802_3_CURRENT_ADDRESS 0x01010102
+/* #define OID_802_3_MULTICAST_LIST 0x01010103 */
+/* #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 */
+/* #define OID_802_3_MAC_OPTIONS 0x01010105 */
+
+#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101
+#define OID_802_3_XMIT_ONE_COLLISION 0x01020102
+#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103
+#define OID_802_3_XMIT_DEFERRED 0x01020201
+#define OID_802_3_XMIT_MAX_COLLISIONS 0x01020202
+#define OID_802_3_RCV_OVERRUN 0x01020203
+#define OID_802_3_XMIT_UNDERRUN 0x01020204
+#define OID_802_3_XMIT_TIMES_CRS_LOST 0x01020206
+#define OID_802_3_XMIT_LATE_COLLISIONS 0x01020207
+
+/*
+ * PnP and PM OIDs
+ */
+#ifdef SK_POWER_MGMT
+#define OID_PNP_CAPABILITIES 0xFD010100
+#define OID_PNP_SET_POWER 0xFD010101
+#define OID_PNP_QUERY_POWER 0xFD010102
+#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103
+#define OID_PNP_REMOVE_WAKE_UP_PATTERN 0xFD010104
+#define OID_PNP_ENABLE_WAKE_UP 0xFD010106
+#endif /* SK_POWER_MGMT */
+
+#endif /* _NDIS_ */
+
+#define OID_SKGE_MDB_VERSION 0xFF010100
+#define OID_SKGE_SUPPORTED_LIST 0xFF010101
+#define OID_SKGE_VPD_FREE_BYTES 0xFF010102
+#define OID_SKGE_VPD_ENTRIES_LIST 0xFF010103
+#define OID_SKGE_VPD_ENTRIES_NUMBER 0xFF010104
+#define OID_SKGE_VPD_KEY 0xFF010105
+#define OID_SKGE_VPD_VALUE 0xFF010106
+#define OID_SKGE_VPD_ACCESS 0xFF010107
+#define OID_SKGE_VPD_ACTION 0xFF010108
+
+#define OID_SKGE_PORT_NUMBER 0xFF010110
+#define OID_SKGE_DEVICE_TYPE 0xFF010111
+#define OID_SKGE_DRIVER_DESCR 0xFF010112
+#define OID_SKGE_DRIVER_VERSION 0xFF010113
+#define OID_SKGE_HW_DESCR 0xFF010114
+#define OID_SKGE_HW_VERSION 0xFF010115
+#define OID_SKGE_CHIPSET 0xFF010116
+#define OID_SKGE_ACTION 0xFF010117
+#define OID_SKGE_RESULT 0xFF010118
+#define OID_SKGE_BUS_TYPE 0xFF010119
+#define OID_SKGE_BUS_SPEED 0xFF01011A
+#define OID_SKGE_BUS_WIDTH 0xFF01011B
+/* 0xFF01011C unused */
+#define OID_SKGE_DIAG_ACTION 0xFF01011D
+#define OID_SKGE_DIAG_RESULT 0xFF01011E
+#define OID_SKGE_MTU 0xFF01011F
+#define OID_SKGE_PHYS_CUR_ADDR 0xFF010120
+#define OID_SKGE_PHYS_FAC_ADDR 0xFF010121
+#define OID_SKGE_PMD 0xFF010122
+#define OID_SKGE_CONNECTOR 0xFF010123
+#define OID_SKGE_LINK_CAP 0xFF010124
+#define OID_SKGE_LINK_MODE 0xFF010125
+#define OID_SKGE_LINK_MODE_STATUS 0xFF010126
+#define OID_SKGE_LINK_STATUS 0xFF010127
+#define OID_SKGE_FLOWCTRL_CAP 0xFF010128
+#define OID_SKGE_FLOWCTRL_MODE 0xFF010129
+#define OID_SKGE_FLOWCTRL_STATUS 0xFF01012A
+#define OID_SKGE_PHY_OPERATION_CAP 0xFF01012B
+#define OID_SKGE_PHY_OPERATION_MODE 0xFF01012C
+#define OID_SKGE_PHY_OPERATION_STATUS 0xFF01012D
+#define OID_SKGE_MULTICAST_LIST 0xFF01012E
+#define OID_SKGE_CURRENT_PACKET_FILTER 0xFF01012F
+
+#define OID_SKGE_TRAP 0xFF010130
+#define OID_SKGE_TRAP_NUMBER 0xFF010131
+
+#define OID_SKGE_RLMT_MODE 0xFF010140
+#define OID_SKGE_RLMT_PORT_NUMBER 0xFF010141
+#define OID_SKGE_RLMT_PORT_ACTIVE 0xFF010142
+#define OID_SKGE_RLMT_PORT_PREFERRED 0xFF010143
+#define OID_SKGE_INTERMEDIATE_SUPPORT 0xFF010160
+
+#define OID_SKGE_SPEED_CAP 0xFF010170
+#define OID_SKGE_SPEED_MODE 0xFF010171
+#define OID_SKGE_SPEED_STATUS 0xFF010172
+
+#define OID_SKGE_SENSOR_NUMBER 0xFF020100
+#define OID_SKGE_SENSOR_INDEX 0xFF020101
+#define OID_SKGE_SENSOR_DESCR 0xFF020102
+#define OID_SKGE_SENSOR_TYPE 0xFF020103
+#define OID_SKGE_SENSOR_VALUE 0xFF020104
+#define OID_SKGE_SENSOR_WAR_THRES_LOW 0xFF020105
+#define OID_SKGE_SENSOR_WAR_THRES_UPP 0xFF020106
+#define OID_SKGE_SENSOR_ERR_THRES_LOW 0xFF020107
+#define OID_SKGE_SENSOR_ERR_THRES_UPP 0xFF020108
+#define OID_SKGE_SENSOR_STATUS 0xFF020109
+#define OID_SKGE_SENSOR_WAR_CTS 0xFF02010A
+#define OID_SKGE_SENSOR_ERR_CTS 0xFF02010B
+#define OID_SKGE_SENSOR_WAR_TIME 0xFF02010C
+#define OID_SKGE_SENSOR_ERR_TIME 0xFF02010D
+
+#define OID_SKGE_CHKSM_NUMBER 0xFF020110
+#define OID_SKGE_CHKSM_RX_OK_CTS 0xFF020111
+#define OID_SKGE_CHKSM_RX_UNABLE_CTS 0xFF020112
+#define OID_SKGE_CHKSM_RX_ERR_CTS 0xFF020113
+#define OID_SKGE_CHKSM_TX_OK_CTS 0xFF020114
+#define OID_SKGE_CHKSM_TX_UNABLE_CTS 0xFF020115
+
+#define OID_SKGE_STAT_TX 0xFF020120
+#define OID_SKGE_STAT_TX_OCTETS 0xFF020121
+#define OID_SKGE_STAT_TX_BROADCAST 0xFF020122
+#define OID_SKGE_STAT_TX_MULTICAST 0xFF020123
+#define OID_SKGE_STAT_TX_UNICAST 0xFF020124
+#define OID_SKGE_STAT_TX_LONGFRAMES 0xFF020125
+#define OID_SKGE_STAT_TX_BURST 0xFF020126
+#define OID_SKGE_STAT_TX_PFLOWC 0xFF020127
+#define OID_SKGE_STAT_TX_FLOWC 0xFF020128
+#define OID_SKGE_STAT_TX_SINGLE_COL 0xFF020129
+#define OID_SKGE_STAT_TX_MULTI_COL 0xFF02012A
+#define OID_SKGE_STAT_TX_EXCESS_COL 0xFF02012B
+#define OID_SKGE_STAT_TX_LATE_COL 0xFF02012C
+#define OID_SKGE_STAT_TX_DEFFERAL 0xFF02012D
+#define OID_SKGE_STAT_TX_EXCESS_DEF 0xFF02012E
+#define OID_SKGE_STAT_TX_UNDERRUN 0xFF02012F
+#define OID_SKGE_STAT_TX_CARRIER 0xFF020130
+/* #define OID_SKGE_STAT_TX_UTIL 0xFF020131 */
+#define OID_SKGE_STAT_TX_64 0xFF020132
+#define OID_SKGE_STAT_TX_127 0xFF020133
+#define OID_SKGE_STAT_TX_255 0xFF020134
+#define OID_SKGE_STAT_TX_511 0xFF020135
+#define OID_SKGE_STAT_TX_1023 0xFF020136
+#define OID_SKGE_STAT_TX_MAX 0xFF020137
+#define OID_SKGE_STAT_TX_SYNC 0xFF020138
+#define OID_SKGE_STAT_TX_SYNC_OCTETS 0xFF020139
+#define OID_SKGE_STAT_RX 0xFF02013A
+#define OID_SKGE_STAT_RX_OCTETS 0xFF02013B
+#define OID_SKGE_STAT_RX_BROADCAST 0xFF02013C
+#define OID_SKGE_STAT_RX_MULTICAST 0xFF02013D
+#define OID_SKGE_STAT_RX_UNICAST 0xFF02013E
+#define OID_SKGE_STAT_RX_PFLOWC 0xFF02013F
+#define OID_SKGE_STAT_RX_FLOWC 0xFF020140
+#define OID_SKGE_STAT_RX_PFLOWC_ERR 0xFF020141
+#define OID_SKGE_STAT_RX_FLOWC_UNKWN 0xFF020142
+#define OID_SKGE_STAT_RX_BURST 0xFF020143
+#define OID_SKGE_STAT_RX_MISSED 0xFF020144
+#define OID_SKGE_STAT_RX_FRAMING 0xFF020145
+#define OID_SKGE_STAT_RX_OVERFLOW 0xFF020146
+#define OID_SKGE_STAT_RX_JABBER 0xFF020147
+#define OID_SKGE_STAT_RX_CARRIER 0xFF020148
+#define OID_SKGE_STAT_RX_IR_LENGTH 0xFF020149
+#define OID_SKGE_STAT_RX_SYMBOL 0xFF02014A
+#define OID_SKGE_STAT_RX_SHORTS 0xFF02014B
+#define OID_SKGE_STAT_RX_RUNT 0xFF02014C
+#define OID_SKGE_STAT_RX_CEXT 0xFF02014D
+#define OID_SKGE_STAT_RX_TOO_LONG 0xFF02014E
+#define OID_SKGE_STAT_RX_FCS 0xFF02014F
+/* #define OID_SKGE_STAT_RX_UTIL 0xFF020150 */
+#define OID_SKGE_STAT_RX_64 0xFF020151
+#define OID_SKGE_STAT_RX_127 0xFF020152
+#define OID_SKGE_STAT_RX_255 0xFF020153
+#define OID_SKGE_STAT_RX_511 0xFF020154
+#define OID_SKGE_STAT_RX_1023 0xFF020155
+#define OID_SKGE_STAT_RX_MAX 0xFF020156
+#define OID_SKGE_STAT_RX_LONGFRAMES 0xFF020157
+
+#define OID_SKGE_RLMT_CHANGE_CTS 0xFF020160
+#define OID_SKGE_RLMT_CHANGE_TIME 0xFF020161
+#define OID_SKGE_RLMT_CHANGE_ESTIM 0xFF020162
+#define OID_SKGE_RLMT_CHANGE_THRES 0xFF020163
+
+#define OID_SKGE_RLMT_PORT_INDEX 0xFF020164
+#define OID_SKGE_RLMT_STATUS 0xFF020165
+#define OID_SKGE_RLMT_TX_HELLO_CTS 0xFF020166
+#define OID_SKGE_RLMT_RX_HELLO_CTS 0xFF020167
+#define OID_SKGE_RLMT_TX_SP_REQ_CTS 0xFF020168
+#define OID_SKGE_RLMT_RX_SP_CTS 0xFF020169
+
+#define OID_SKGE_RLMT_MONITOR_NUMBER 0xFF010150
+#define OID_SKGE_RLMT_MONITOR_INDEX 0xFF010151
+#define OID_SKGE_RLMT_MONITOR_ADDR 0xFF010152
+#define OID_SKGE_RLMT_MONITOR_ERRS 0xFF010153
+#define OID_SKGE_RLMT_MONITOR_TIMESTAMP 0xFF010154
+#define OID_SKGE_RLMT_MONITOR_ADMIN 0xFF010155
+
+#define OID_SKGE_TX_SW_QUEUE_LEN 0xFF020170
+#define OID_SKGE_TX_SW_QUEUE_MAX 0xFF020171
+#define OID_SKGE_TX_RETRY 0xFF020172
+#define OID_SKGE_RX_INTR_CTS 0xFF020173
+#define OID_SKGE_TX_INTR_CTS 0xFF020174
+#define OID_SKGE_RX_NO_BUF_CTS 0xFF020175
+#define OID_SKGE_TX_NO_BUF_CTS 0xFF020176
+#define OID_SKGE_TX_USED_DESCR_NO 0xFF020177
+#define OID_SKGE_RX_DELIVERED_CTS 0xFF020178
+#define OID_SKGE_RX_OCTETS_DELIV_CTS 0xFF020179
+#define OID_SKGE_RX_HW_ERROR_CTS 0xFF02017A
+#define OID_SKGE_TX_HW_ERROR_CTS 0xFF02017B
+#define OID_SKGE_IN_ERRORS_CTS 0xFF02017C
+#define OID_SKGE_OUT_ERROR_CTS 0xFF02017D
+#define OID_SKGE_ERR_RECOVERY_CTS 0xFF02017E
+#define OID_SKGE_SYSUPTIME 0xFF02017F
+
+#define OID_SKGE_ALL_DATA 0xFF020190
+
+/* Defines for VCT. */
+#define OID_SKGE_VCT_GET 0xFF020200
+#define OID_SKGE_VCT_SET 0xFF020201
+#define OID_SKGE_VCT_STATUS 0xFF020202
+
+
+/* VCT struct to store a backup copy of VCT data after a port reset. */
+typedef struct s_PnmiVct {
+ SK_U8 VctStatus;
+ SK_U8 PCableLen;
+ SK_U32 PMdiPairLen[4];
+ SK_U8 PMdiPairSts[4];
+} SK_PNMI_VCT;
+
+
+/* VCT status values (to be given to CPA via OID_SKGE_VCT_STATUS). */
+#define SK_PNMI_VCT_NONE 0
+#define SK_PNMI_VCT_OLD_VCT_DATA 1
+#define SK_PNMI_VCT_NEW_VCT_DATA 2
+#define SK_PNMI_VCT_OLD_DSP_DATA 4
+#define SK_PNMI_VCT_NEW_DSP_DATA 8
+#define SK_PNMI_VCT_RUNNING 16
+
+
+/* VCT cable test status. */
+#define SK_PNMI_VCT_NORMAL_CABLE 0
+#define SK_PNMI_VCT_SHORT_CABLE 1
+#define SK_PNMI_VCT_OPEN_CABLE 2
+#define SK_PNMI_VCT_TEST_FAIL 3
+#define SK_PNMI_VCT_IMPEDANCE_MISMATCH 4
+
+#define OID_SKGE_TRAP_SEN_WAR_LOW 500
+#define OID_SKGE_TRAP_SEN_WAR_UPP 501
+#define OID_SKGE_TRAP_SEN_ERR_LOW 502
+#define OID_SKGE_TRAP_SEN_ERR_UPP 503
+#define OID_SKGE_TRAP_RLMT_CHANGE_THRES 520
+#define OID_SKGE_TRAP_RLMT_CHANGE_PORT 521
+#define OID_SKGE_TRAP_RLMT_PORT_DOWN 522
+#define OID_SKGE_TRAP_RLMT_PORT_UP 523
+#define OID_SKGE_TRAP_RLMT_SEGMENTATION 524
+
+
+/*
+ * Define error numbers and messages for syslog
+ */
+#define SK_PNMI_ERR001 (SK_ERRBASE_PNMI + 1)
+#define SK_PNMI_ERR001MSG "SkPnmiGetStruct: Unknown OID"
+#define SK_PNMI_ERR002 (SK_ERRBASE_PNMI + 2)
+#define SK_PNMI_ERR002MSG "SkPnmiGetStruct: Cannot read VPD keys"
+#define SK_PNMI_ERR003 (SK_ERRBASE_PNMI + 3)
+#define SK_PNMI_ERR003MSG "OidStruct: Called with wrong OID"
+#define SK_PNMI_ERR004 (SK_ERRBASE_PNMI + 4)
+#define SK_PNMI_ERR004MSG "OidStruct: Called with wrong action"
+#define SK_PNMI_ERR005 (SK_ERRBASE_PNMI + 5)
+#define SK_PNMI_ERR005MSG "Perform: Cannot reset driver"
+#define SK_PNMI_ERR006 (SK_ERRBASE_PNMI + 6)
+#define SK_PNMI_ERR006MSG "Perform: Unknown OID action command"
+#define SK_PNMI_ERR007 (SK_ERRBASE_PNMI + 7)
+#define SK_PNMI_ERR007MSG "General: Driver description not initialized"
+#define SK_PNMI_ERR008 (SK_ERRBASE_PNMI + 8)
+#define SK_PNMI_ERR008MSG "Addr: Tried to get unknown OID"
+#define SK_PNMI_ERR009 (SK_ERRBASE_PNMI + 9)
+#define SK_PNMI_ERR009MSG "Addr: Unknown OID"
+#define SK_PNMI_ERR010 (SK_ERRBASE_PNMI + 10)
+#define SK_PNMI_ERR010MSG "CsumStat: Unknown OID"
+#define SK_PNMI_ERR011 (SK_ERRBASE_PNMI + 11)
+#define SK_PNMI_ERR011MSG "SensorStat: Sensor descr string too long"
+#define SK_PNMI_ERR012 (SK_ERRBASE_PNMI + 12)
+#define SK_PNMI_ERR012MSG "SensorStat: Unknown OID"
+#define SK_PNMI_ERR013 (SK_ERRBASE_PNMI + 13)
+#define SK_PNMI_ERR013MSG ""
+#define SK_PNMI_ERR014 (SK_ERRBASE_PNMI + 14)
+#define SK_PNMI_ERR014MSG "Vpd: Cannot read VPD keys"
+#define SK_PNMI_ERR015 (SK_ERRBASE_PNMI + 15)
+#define SK_PNMI_ERR015MSG "Vpd: Internal array for VPD keys to small"
+#define SK_PNMI_ERR016 (SK_ERRBASE_PNMI + 16)
+#define SK_PNMI_ERR016MSG "Vpd: Key string too long"
+#define SK_PNMI_ERR017 (SK_ERRBASE_PNMI + 17)
+#define SK_PNMI_ERR017MSG "Vpd: Invalid VPD status pointer"
+#define SK_PNMI_ERR018 (SK_ERRBASE_PNMI + 18)
+#define SK_PNMI_ERR018MSG "Vpd: VPD data not valid"
+#define SK_PNMI_ERR019 (SK_ERRBASE_PNMI + 19)
+#define SK_PNMI_ERR019MSG "Vpd: VPD entries list string too long"
+#define SK_PNMI_ERR021 (SK_ERRBASE_PNMI + 21)
+#define SK_PNMI_ERR021MSG "Vpd: VPD data string too long"
+#define SK_PNMI_ERR022 (SK_ERRBASE_PNMI + 22)
+#define SK_PNMI_ERR022MSG "Vpd: VPD data string too long should be errored before"
+#define SK_PNMI_ERR023 (SK_ERRBASE_PNMI + 23)
+#define SK_PNMI_ERR023MSG "Vpd: Unknown OID in get action"
+#define SK_PNMI_ERR024 (SK_ERRBASE_PNMI + 24)
+#define SK_PNMI_ERR024MSG "Vpd: Unknown OID in preset/set action"
+#define SK_PNMI_ERR025 (SK_ERRBASE_PNMI + 25)
+#define SK_PNMI_ERR025MSG "Vpd: Cannot write VPD after modify entry"
+#define SK_PNMI_ERR026 (SK_ERRBASE_PNMI + 26)
+#define SK_PNMI_ERR026MSG "Vpd: Cannot update VPD"
+#define SK_PNMI_ERR027 (SK_ERRBASE_PNMI + 27)
+#define SK_PNMI_ERR027MSG "Vpd: Cannot delete VPD entry"
+#define SK_PNMI_ERR028 (SK_ERRBASE_PNMI + 28)
+#define SK_PNMI_ERR028MSG "Vpd: Cannot update VPD after delete entry"
+#define SK_PNMI_ERR029 (SK_ERRBASE_PNMI + 29)
+#define SK_PNMI_ERR029MSG "General: Driver description string too long"
+#define SK_PNMI_ERR030 (SK_ERRBASE_PNMI + 30)
+#define SK_PNMI_ERR030MSG "General: Driver version not initialized"
+#define SK_PNMI_ERR031 (SK_ERRBASE_PNMI + 31)
+#define SK_PNMI_ERR031MSG "General: Driver version string too long"
+#define SK_PNMI_ERR032 (SK_ERRBASE_PNMI + 32)
+#define SK_PNMI_ERR032MSG "General: Cannot read VPD Name for HW descr"
+#define SK_PNMI_ERR033 (SK_ERRBASE_PNMI + 33)
+#define SK_PNMI_ERR033MSG "General: HW description string too long"
+#define SK_PNMI_ERR034 (SK_ERRBASE_PNMI + 34)
+#define SK_PNMI_ERR034MSG "General: Unknown OID"
+#define SK_PNMI_ERR035 (SK_ERRBASE_PNMI + 35)
+#define SK_PNMI_ERR035MSG "Rlmt: Unknown OID"
+#define SK_PNMI_ERR036 (SK_ERRBASE_PNMI + 36)
+#define SK_PNMI_ERR036MSG ""
+#define SK_PNMI_ERR037 (SK_ERRBASE_PNMI + 37)
+#define SK_PNMI_ERR037MSG "Rlmt: SK_RLMT_MODE_CHANGE event return not 0"
+#define SK_PNMI_ERR038 (SK_ERRBASE_PNMI + 38)
+#define SK_PNMI_ERR038MSG "Rlmt: SK_RLMT_PREFPORT_CHANGE event return not 0"
+#define SK_PNMI_ERR039 (SK_ERRBASE_PNMI + 39)
+#define SK_PNMI_ERR039MSG "RlmtStat: Unknown OID"
+#define SK_PNMI_ERR040 (SK_ERRBASE_PNMI + 40)
+#define SK_PNMI_ERR040MSG "PowerManagement: Unknown OID"
+#define SK_PNMI_ERR041 (SK_ERRBASE_PNMI + 41)
+#define SK_PNMI_ERR041MSG "MacPrivateConf: Unknown OID"
+#define SK_PNMI_ERR042 (SK_ERRBASE_PNMI + 42)
+#define SK_PNMI_ERR042MSG "MacPrivateConf: SK_HWEV_SET_ROLE returned not 0"
+#define SK_PNMI_ERR043 (SK_ERRBASE_PNMI + 43)
+#define SK_PNMI_ERR043MSG "MacPrivateConf: SK_HWEV_SET_LMODE returned not 0"
+#define SK_PNMI_ERR044 (SK_ERRBASE_PNMI + 44)
+#define SK_PNMI_ERR044MSG "MacPrivateConf: SK_HWEV_SET_FLOWMODE returned not 0"
+#define SK_PNMI_ERR045 (SK_ERRBASE_PNMI + 45)
+#define SK_PNMI_ERR045MSG "MacPrivateConf: SK_HWEV_SET_SPEED returned not 0"
+#define SK_PNMI_ERR046 (SK_ERRBASE_PNMI + 46)
+#define SK_PNMI_ERR046MSG "Monitor: Unknown OID"
+#define SK_PNMI_ERR047 (SK_ERRBASE_PNMI + 47)
+#define SK_PNMI_ERR047MSG "SirqUpdate: Event function returns not 0"
+#define SK_PNMI_ERR048 (SK_ERRBASE_PNMI + 48)
+#define SK_PNMI_ERR048MSG "RlmtUpdate: Event function returns not 0"
+#define SK_PNMI_ERR049 (SK_ERRBASE_PNMI + 49)
+#define SK_PNMI_ERR049MSG "SkPnmiInit: Invalid size of 'CounterOffset' struct!!"
+#define SK_PNMI_ERR050 (SK_ERRBASE_PNMI + 50)
+#define SK_PNMI_ERR050MSG "SkPnmiInit: Invalid size of 'StatAddr' table!!"
+#define SK_PNMI_ERR051 (SK_ERRBASE_PNMI + 51)
+#define SK_PNMI_ERR051MSG "SkPnmiEvent: Port switch suspicious"
+#define SK_PNMI_ERR052 (SK_ERRBASE_PNMI + 52)
+#define SK_PNMI_ERR052MSG ""
+
+/*
+ * Management counter macros called by the driver
+ */
+#define SK_PNMI_SET_DRIVER_DESCR(pAC,v) ((pAC)->Pnmi.pDriverDescription = \
+ (char *)(v))
+
+#define SK_PNMI_SET_DRIVER_VER(pAC,v) ((pAC)->Pnmi.pDriverVersion = \
+ (char *)(v))
+
+
+#define SK_PNMI_CNT_TX_QUEUE_LEN(pAC,v,p) \
+ { \
+ (pAC)->Pnmi.Port[p].TxSwQueueLen = (SK_U64)(v); \
+ if ((pAC)->Pnmi.Port[p].TxSwQueueLen > (pAC)->Pnmi.Port[p].TxSwQueueMax) { \
+ (pAC)->Pnmi.Port[p].TxSwQueueMax = (pAC)->Pnmi.Port[p].TxSwQueueLen; \
+ } \
+ }
+#define SK_PNMI_CNT_TX_RETRY(pAC,p) (((pAC)->Pnmi.Port[p].TxRetryCts)++)
+#define SK_PNMI_CNT_RX_INTR(pAC,p) (((pAC)->Pnmi.Port[p].RxIntrCts)++)
+#define SK_PNMI_CNT_TX_INTR(pAC,p) (((pAC)->Pnmi.Port[p].TxIntrCts)++)
+#define SK_PNMI_CNT_NO_RX_BUF(pAC,p) (((pAC)->Pnmi.Port[p].RxNoBufCts)++)
+#define SK_PNMI_CNT_NO_TX_BUF(pAC,p) (((pAC)->Pnmi.Port[p].TxNoBufCts)++)
+#define SK_PNMI_CNT_USED_TX_DESCR(pAC,v,p) \
+ ((pAC)->Pnmi.Port[p].TxUsedDescrNo=(SK_U64)(v));
+#define SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,v,p) \
+ { \
+ ((pAC)->Pnmi.Port[p].RxDeliveredCts)++; \
+ (pAC)->Pnmi.Port[p].RxOctetsDeliveredCts += (SK_U64)(v); \
+ }
+#define SK_PNMI_CNT_ERR_RECOVERY(pAC,p) (((pAC)->Pnmi.Port[p].ErrRecoveryCts)++);
+
+#define SK_PNMI_CNT_SYNC_OCTETS(pAC,p,v) \
+ { \
+ if ((p) < SK_MAX_MACS) { \
+ ((pAC)->Pnmi.Port[p].StatSyncCts)++; \
+ (pAC)->Pnmi.Port[p].StatSyncOctetsCts += (SK_U64)(v); \
+ } \
+ }
+
+#define SK_PNMI_CNT_RX_LONGFRAMES(pAC,p) \
+ { \
+ if ((p) < SK_MAX_MACS) { \
+ ((pAC)->Pnmi.Port[p].StatRxLongFrameCts++); \
+ } \
+ }
+
+#define SK_PNMI_CNT_RX_FRAMETOOLONG(pAC,p) \
+ { \
+ if ((p) < SK_MAX_MACS) { \
+ ((pAC)->Pnmi.Port[p].StatRxFrameTooLongCts++); \
+ } \
+ }
+
+#define SK_PNMI_CNT_RX_PMACC_ERR(pAC,p) \
+ { \
+ if ((p) < SK_MAX_MACS) { \
+ ((pAC)->Pnmi.Port[p].StatRxPMaccErr++); \
+ } \
+ }
+
+/*
+ * Conversion Macros
+ */
+#define SK_PNMI_PORT_INST2LOG(i) ((unsigned int)(i) - 1)
+#define SK_PNMI_PORT_LOG2INST(l) ((unsigned int)(l) + 1)
+#define SK_PNMI_PORT_PHYS2LOG(p) ((unsigned int)(p) + 1)
+#define SK_PNMI_PORT_LOG2PHYS(pAC,l) ((unsigned int)(l) - 1)
+#define SK_PNMI_PORT_PHYS2INST(pAC,p) \
+ (pAC->Pnmi.DualNetActiveFlag ? 2 : ((unsigned int)(p) + 2))
+#define SK_PNMI_PORT_INST2PHYS(pAC,i) ((unsigned int)(i) - 2)
+
+/*
+ * Structure definition for SkPnmiGetStruct and SkPnmiSetStruct
+ */
+#define SK_PNMI_VPD_KEY_SIZE 5
+#define SK_PNMI_VPD_BUFSIZE (VPD_SIZE)
+#define SK_PNMI_VPD_ENTRIES (VPD_SIZE / 4)
+#define SK_PNMI_VPD_DATALEN 128 /* Number of data bytes */
+
+#define SK_PNMI_MULTICAST_LISTLEN 64
+#define SK_PNMI_SENSOR_ENTRIES (SK_MAX_SENSORS)
+#define SK_PNMI_CHECKSUM_ENTRIES 3
+#define SK_PNMI_MAC_ENTRIES (SK_MAX_MACS + 1)
+#define SK_PNMI_MONITOR_ENTRIES 20
+#define SK_PNMI_TRAP_ENTRIES 10
+#define SK_PNMI_TRAPLEN 128
+#define SK_PNMI_STRINGLEN1 80
+#define SK_PNMI_STRINGLEN2 25
+#define SK_PNMI_TRAP_QUEUE_LEN 512
+
+typedef struct s_PnmiVpd {
+ char VpdKey[SK_PNMI_VPD_KEY_SIZE];
+ char VpdValue[SK_PNMI_VPD_DATALEN];
+ SK_U8 VpdAccess;
+ SK_U8 VpdAction;
+} SK_PNMI_VPD;
+
+typedef struct s_PnmiSensor {
+ SK_U8 SensorIndex;
+ char SensorDescr[SK_PNMI_STRINGLEN2];
+ SK_U8 SensorType;
+ SK_U32 SensorValue;
+ SK_U32 SensorWarningThresholdLow;
+ SK_U32 SensorWarningThresholdHigh;
+ SK_U32 SensorErrorThresholdLow;
+ SK_U32 SensorErrorThresholdHigh;
+ SK_U8 SensorStatus;
+ SK_U64 SensorWarningCts;
+ SK_U64 SensorErrorCts;
+ SK_U64 SensorWarningTimestamp;
+ SK_U64 SensorErrorTimestamp;
+} SK_PNMI_SENSOR;
+
+typedef struct s_PnmiChecksum {
+ SK_U64 ChecksumRxOkCts;
+ SK_U64 ChecksumRxUnableCts;
+ SK_U64 ChecksumRxErrCts;
+ SK_U64 ChecksumTxOkCts;
+ SK_U64 ChecksumTxUnableCts;
+} SK_PNMI_CHECKSUM;
+
+typedef struct s_PnmiStat {
+ SK_U64 StatTxOkCts;
+ SK_U64 StatTxOctetsOkCts;
+ SK_U64 StatTxBroadcastOkCts;
+ SK_U64 StatTxMulticastOkCts;
+ SK_U64 StatTxUnicastOkCts;
+ SK_U64 StatTxLongFramesCts;
+ SK_U64 StatTxBurstCts;
+ SK_U64 StatTxPauseMacCtrlCts;
+ SK_U64 StatTxMacCtrlCts;
+ SK_U64 StatTxSingleCollisionCts;
+ SK_U64 StatTxMultipleCollisionCts;
+ SK_U64 StatTxExcessiveCollisionCts;
+ SK_U64 StatTxLateCollisionCts;
+ SK_U64 StatTxDeferralCts;
+ SK_U64 StatTxExcessiveDeferralCts;
+ SK_U64 StatTxFifoUnderrunCts;
+ SK_U64 StatTxCarrierCts;
+ SK_U64 Dummy1; /* StatTxUtilization */
+ SK_U64 StatTx64Cts;
+ SK_U64 StatTx127Cts;
+ SK_U64 StatTx255Cts;
+ SK_U64 StatTx511Cts;
+ SK_U64 StatTx1023Cts;
+ SK_U64 StatTxMaxCts;
+ SK_U64 StatTxSyncCts;
+ SK_U64 StatTxSyncOctetsCts;
+ SK_U64 StatRxOkCts;
+ SK_U64 StatRxOctetsOkCts;
+ SK_U64 StatRxBroadcastOkCts;
+ SK_U64 StatRxMulticastOkCts;
+ SK_U64 StatRxUnicastOkCts;
+ SK_U64 StatRxLongFramesCts;
+ SK_U64 StatRxPauseMacCtrlCts;
+ SK_U64 StatRxMacCtrlCts;
+ SK_U64 StatRxPauseMacCtrlErrorCts;
+ SK_U64 StatRxMacCtrlUnknownCts;
+ SK_U64 StatRxBurstCts;
+ SK_U64 StatRxMissedCts;
+ SK_U64 StatRxFramingCts;
+ SK_U64 StatRxFifoOverflowCts;
+ SK_U64 StatRxJabberCts;
+ SK_U64 StatRxCarrierCts;
+ SK_U64 StatRxIRLengthCts;
+ SK_U64 StatRxSymbolCts;
+ SK_U64 StatRxShortsCts;
+ SK_U64 StatRxRuntCts;
+ SK_U64 StatRxCextCts;
+ SK_U64 StatRxTooLongCts;
+ SK_U64 StatRxFcsCts;
+ SK_U64 Dummy2; /* StatRxUtilization */
+ SK_U64 StatRx64Cts;
+ SK_U64 StatRx127Cts;
+ SK_U64 StatRx255Cts;
+ SK_U64 StatRx511Cts;
+ SK_U64 StatRx1023Cts;
+ SK_U64 StatRxMaxCts;
+} SK_PNMI_STAT;
+
+typedef struct s_PnmiConf {
+ char ConfMacCurrentAddr[6];
+ char ConfMacFactoryAddr[6];
+ SK_U8 ConfPMD;
+ SK_U8 ConfConnector;
+ SK_U8 ConfLinkCapability;
+ SK_U8 ConfLinkMode;
+ SK_U8 ConfLinkModeStatus;
+ SK_U8 ConfLinkStatus;
+ SK_U8 ConfFlowCtrlCapability;
+ SK_U8 ConfFlowCtrlMode;
+ SK_U8 ConfFlowCtrlStatus;
+ SK_U8 ConfPhyOperationCapability;
+ SK_U8 ConfPhyOperationMode;
+ SK_U8 ConfPhyOperationStatus;
+ SK_U8 ConfSpeedCapability;
+ SK_U8 ConfSpeedMode;
+ SK_U8 ConfSpeedStatus;
+} SK_PNMI_CONF;
+
+typedef struct s_PnmiRlmt {
+ SK_U32 RlmtIndex;
+ SK_U32 RlmtStatus;
+ SK_U64 RlmtTxHelloCts;
+ SK_U64 RlmtRxHelloCts;
+ SK_U64 RlmtTxSpHelloReqCts;
+ SK_U64 RlmtRxSpHelloCts;
+} SK_PNMI_RLMT;
+
+typedef struct s_PnmiRlmtMonitor {
+ SK_U32 RlmtMonitorIndex;
+ char RlmtMonitorAddr[6];
+ SK_U64 RlmtMonitorErrorCts;
+ SK_U64 RlmtMonitorTimestamp;
+ SK_U8 RlmtMonitorAdmin;
+} SK_PNMI_RLMT_MONITOR;
+
+typedef struct s_PnmiRequestStatus {
+ SK_U32 ErrorStatus;
+ SK_U32 ErrorOffset;
+} SK_PNMI_REQUEST_STATUS;
+
+typedef struct s_PnmiStrucData {
+ SK_U32 MgmtDBVersion;
+ SK_PNMI_REQUEST_STATUS ReturnStatus;
+ SK_U32 VpdFreeBytes;
+ char VpdEntriesList[SK_PNMI_VPD_ENTRIES * SK_PNMI_VPD_KEY_SIZE];
+ SK_U32 VpdEntriesNumber;
+ SK_PNMI_VPD Vpd[SK_PNMI_VPD_ENTRIES];
+ SK_U32 PortNumber;
+ SK_U32 DeviceType;
+ char DriverDescr[SK_PNMI_STRINGLEN1];
+ char DriverVersion[SK_PNMI_STRINGLEN2];
+ char HwDescr[SK_PNMI_STRINGLEN1];
+ char HwVersion[SK_PNMI_STRINGLEN2];
+ SK_U16 Chipset;
+ SK_U32 MtuSize;
+ SK_U32 Action;
+ SK_U32 TestResult;
+ SK_U8 BusType;
+ SK_U8 BusSpeed;
+ SK_U8 BusWidth;
+ SK_U8 SensorNumber;
+ SK_PNMI_SENSOR Sensor[SK_PNMI_SENSOR_ENTRIES];
+ SK_U8 ChecksumNumber;
+ SK_PNMI_CHECKSUM Checksum[SK_PNMI_CHECKSUM_ENTRIES];
+ SK_PNMI_STAT Stat[SK_PNMI_MAC_ENTRIES];
+ SK_PNMI_CONF Conf[SK_PNMI_MAC_ENTRIES];
+ SK_U8 RlmtMode;
+ SK_U32 RlmtPortNumber;
+ SK_U8 RlmtPortActive;
+ SK_U8 RlmtPortPreferred;
+ SK_U64 RlmtChangeCts;
+ SK_U64 RlmtChangeTime;
+ SK_U64 RlmtChangeEstimate;
+ SK_U64 RlmtChangeThreshold;
+ SK_PNMI_RLMT Rlmt[SK_MAX_MACS];
+ SK_U32 RlmtMonitorNumber;
+ SK_PNMI_RLMT_MONITOR RlmtMonitor[SK_PNMI_MONITOR_ENTRIES];
+ SK_U32 TrapNumber;
+ SK_U8 Trap[SK_PNMI_TRAP_QUEUE_LEN];
+ SK_U64 TxSwQueueLen;
+ SK_U64 TxSwQueueMax;
+ SK_U64 TxRetryCts;
+ SK_U64 RxIntrCts;
+ SK_U64 TxIntrCts;
+ SK_U64 RxNoBufCts;
+ SK_U64 TxNoBufCts;
+ SK_U64 TxUsedDescrNo;
+ SK_U64 RxDeliveredCts;
+ SK_U64 RxOctetsDeliveredCts;
+ SK_U64 RxHwErrorsCts;
+ SK_U64 TxHwErrorsCts;
+ SK_U64 InErrorsCts;
+ SK_U64 OutErrorsCts;
+ SK_U64 ErrRecoveryCts;
+ SK_U64 SysUpTime;
+} SK_PNMI_STRUCT_DATA;
+
+#define SK_PNMI_STRUCT_SIZE (sizeof(SK_PNMI_STRUCT_DATA))
+#define SK_PNMI_MIN_STRUCT_SIZE ((unsigned int)(SK_UPTR)\
+ &(((SK_PNMI_STRUCT_DATA *)0)->VpdFreeBytes))
+ /*
+ * ReturnStatus field
+ * must be located
+ * before VpdFreeBytes
+ */
+
+/*
+ * Various definitions
+ */
+#define SK_PNMI_MAX_PROTOS 3
+
+#define SK_PNMI_CNT_NO 66 /* Must have the value of the enum
+ * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK
+ * for check while init phase 1
+ */
+
+/*
+ * Estimate data structure
+ */
+typedef struct s_PnmiEstimate {
+ unsigned int EstValueIndex;
+ SK_U64 EstValue[7];
+ SK_U64 Estimate;
+ SK_TIMER EstTimer;
+} SK_PNMI_ESTIMATE;
+
+
+/*
+ * VCT timer data structure
+ */
+typedef struct s_VctTimer {
+ SK_TIMER VctTimer;
+} SK_PNMI_VCT_TIMER;
+
+
+/*
+ * PNMI specific adapter context structure
+ */
+typedef struct s_PnmiPort {
+ SK_U64 StatSyncCts;
+ SK_U64 StatSyncOctetsCts;
+ SK_U64 StatRxLongFrameCts;
+ SK_U64 StatRxFrameTooLongCts;
+ SK_U64 StatRxPMaccErr;
+ SK_U64 TxSwQueueLen;
+ SK_U64 TxSwQueueMax;
+ SK_U64 TxRetryCts;
+ SK_U64 RxIntrCts;
+ SK_U64 TxIntrCts;
+ SK_U64 RxNoBufCts;
+ SK_U64 TxNoBufCts;
+ SK_U64 TxUsedDescrNo;
+ SK_U64 RxDeliveredCts;
+ SK_U64 RxOctetsDeliveredCts;
+ SK_U64 RxHwErrorsCts;
+ SK_U64 TxHwErrorsCts;
+ SK_U64 InErrorsCts;
+ SK_U64 OutErrorsCts;
+ SK_U64 ErrRecoveryCts;
+ SK_U64 RxShortZeroMark;
+ SK_U64 CounterOffset[SK_PNMI_CNT_NO];
+ SK_U32 CounterHigh[SK_PNMI_CNT_NO];
+ SK_BOOL ActiveFlag;
+ SK_U8 Align[3];
+} SK_PNMI_PORT;
+
+
+typedef struct s_PnmiData {
+ SK_PNMI_PORT Port [SK_MAX_MACS];
+ SK_PNMI_PORT BufPort [SK_MAX_MACS]; /* 2002-09-13 pweber */
+ SK_U64 VirtualCounterOffset[SK_PNMI_CNT_NO];
+ SK_U32 TestResult;
+ char HwVersion[10];
+ SK_U16 Align01;
+
+ char *pDriverDescription;
+ char *pDriverVersion;
+
+ int MacUpdatedFlag;
+ int RlmtUpdatedFlag;
+ int SirqUpdatedFlag;
+
+ SK_U64 RlmtChangeCts;
+ SK_U64 RlmtChangeTime;
+ SK_PNMI_ESTIMATE RlmtChangeEstimate;
+ SK_U64 RlmtChangeThreshold;
+
+ SK_U64 StartUpTime;
+ SK_U32 DeviceType;
+ char PciBusSpeed;
+ char PciBusWidth;
+ char Chipset;
+ char PMD;
+ char Connector;
+ SK_BOOL DualNetActiveFlag;
+ SK_U16 Align02;
+
+ char TrapBuf[SK_PNMI_TRAP_QUEUE_LEN];
+ unsigned int TrapBufFree;
+ unsigned int TrapQueueBeg;
+ unsigned int TrapQueueEnd;
+ unsigned int TrapBufPad;
+ unsigned int TrapUnique;
+ SK_U8 VctStatus[SK_MAX_MACS];
+ SK_PNMI_VCT VctBackup[SK_MAX_MACS];
+ SK_PNMI_VCT_TIMER VctTimeout[SK_MAX_MACS];
+} SK_PNMI;
+
+
+/*
+ * Function prototypes
+ */
+extern int SkPnmiInit(SK_AC *pAc, SK_IOC IoC, int level);
+extern int SkPnmiGetVar(SK_AC *pAc, SK_IOC IoC, SK_U32 Id, void* pBuf,
+ unsigned int* pLen, SK_U32 Instance, SK_U32 NetIndex);
+extern int SkPnmiPreSetVar(SK_AC *pAc, SK_IOC IoC, SK_U32 Id,
+ void* pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
+extern int SkPnmiSetVar(SK_AC *pAc, SK_IOC IoC, SK_U32 Id, void* pBuf,
+ unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
+extern int SkPnmiGetStruct(SK_AC *pAc, SK_IOC IoC, void* pBuf,
+ unsigned int *pLen, SK_U32 NetIndex);
+extern int SkPnmiPreSetStruct(SK_AC *pAc, SK_IOC IoC, void* pBuf,
+ unsigned int *pLen, SK_U32 NetIndex);
+extern int SkPnmiSetStruct(SK_AC *pAc, SK_IOC IoC, void* pBuf,
+ unsigned int *pLen, SK_U32 NetIndex);
+extern int SkPnmiEvent(SK_AC *pAc, SK_IOC IoC, SK_U32 Event,
+ SK_EVPARA Param);
+
+#endif
diff --git a/drivers/net/sk98lin/h/skgesirq.h b/drivers/net/sk98lin/h/skgesirq.h
new file mode 100644
index 0000000..fc001b23
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgesirq.h
@@ -0,0 +1,194 @@
+/******************************************************************************
+ *
+ * Name: skgesirq.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.26 $
+ * Date: $Date: 2002/10/14 09:52:36 $
+ * Purpose: SK specific Gigabit Ethernet special IRQ functions
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ * $Log: skgesirq.h,v $
+ * Revision 1.26 2002/10/14 09:52:36 rschmidt
+ * Added SKERR_SIRQ_E023 and SKERR_SIRQ_E023 for GPHY (Yukon)
+ * Editorial changes
+ *
+ * Revision 1.25 2002/07/15 18:15:52 rwahl
+ * Editorial changes.
+ *
+ * Revision 1.24 2002/07/15 15:39:21 rschmidt
+ * Corrected define for SKERR_SIRQ_E022
+ * Editorial changes
+ *
+ * Revision 1.23 2002/04/25 11:09:45 rschmidt
+ * Removed declarations for SkXmInitPhy(), SkXmRxTxEnable()
+ * Editorial changes
+ *
+ * Revision 1.22 2000/11/09 11:30:10 rassmann
+ * WA: Waiting after releasing reset until BCom chip is accessible.
+ *
+ * Revision 1.21 2000/10/18 12:22:40 cgoos
+ * Added workaround for half duplex hangup.
+ *
+ * Revision 1.20 1999/12/06 10:00:44 cgoos
+ * Added SET event for role.
+ *
+ * Revision 1.19 1999/11/22 13:58:26 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.18 1999/05/19 07:32:59 cgoos
+ * Changes for 1000Base-T.
+ *
+ * Revision 1.17 1999/03/12 13:29:31 malthoff
+ * Move Autonegotiation Error Codes to skgeinit.h.
+ *
+ * Revision 1.16 1999/03/08 10:11:28 gklug
+ * add: AutoNegDone return codes
+ *
+ * Revision 1.15 1998/11/18 13:20:53 gklug
+ * add: different timeouts for active and non-active links
+ *
+ * Revision 1.14 1998/11/04 07:18:14 cgoos
+ * Added prototype for SkXmRxTxEnable.
+ *
+ * Revision 1.13 1998/10/21 05:52:23 gklug
+ * add: parameter DoLoop to InitPhy function
+ *
+ * Revision 1.12 1998/10/19 06:45:03 cgoos
+ * Added prototype for SkXmInitPhy.
+ *
+ * Revision 1.11 1998/10/15 14:34:10 gklug
+ * add: WA_TIME is 500 msec
+ *
+ * Revision 1.10 1998/10/14 14:49:41 malthoff
+ * Remove err log defines E021 and E022. They are
+ * defined in skgeinit.h now.
+ *
+ * Revision 1.9 1998/10/14 14:00:39 gklug
+ * add: error logs for init phys
+ *
+ * Revision 1.8 1998/10/14 05:44:05 gklug
+ * add: E020
+ *
+ * Revision 1.7 1998/10/02 06:24:58 gklug
+ * add: error messages
+ *
+ * Revision 1.6 1998/10/01 07:54:45 gklug
+ * add: PNMI debug module
+ *
+ * Revision 1.5 1998/09/28 13:36:31 malthoff
+ * Move the bit definitions for Autonegotiation
+ * and Flow Control to skgeinit.h.
+ *
+ * Revision 1.4 1998/09/15 12:29:34 gklug
+ * add: error logs
+ *
+ * Revision 1.3 1998/09/03 13:54:02 gklug
+ * add: function prototypes
+ *
+ * Revision 1.2 1998/09/03 10:24:36 gklug
+ * add: Events send by PNMI
+ * add: parameter definition for Flow Control etc.
+ *
+ * Revision 1.1 1998/08/27 11:50:27 gklug
+ * initial revision
+ *
+ *
+ ******************************************************************************/
+
+#ifndef _INC_SKGESIRQ_H_
+#define _INC_SKGESIRQ_H_
+
+/*
+ * Define the Event the special IRQ/INI module can handle
+ */
+#define SK_HWEV_WATIM 1 /* Timeout for WA errata #2 XMAC */
+#define SK_HWEV_PORT_START 2 /* Port Start Event by RLMT */
+#define SK_HWEV_PORT_STOP 3 /* Port Stop Event by RLMT */
+#define SK_HWEV_CLEAR_STAT 4 /* Clear Statistics by PNMI */
+#define SK_HWEV_UPDATE_STAT 5 /* Update Statistics by PNMI */
+#define SK_HWEV_SET_LMODE 6 /* Set Link Mode by PNMI */
+#define SK_HWEV_SET_FLOWMODE 7 /* Set Flow Control Mode by PNMI */
+#define SK_HWEV_SET_ROLE 8 /* Set Master/Slave (Role) by PNMI */
+#define SK_HWEV_SET_SPEED 9 /* Set Link Speed by PNMI */
+#define SK_HWEV_HALFDUP_CHK 10 /* Half Duplex Hangup Workaround */
+
+#define SK_WA_ACT_TIME (5000000L) /* 5 sec */
+#define SK_WA_INA_TIME (100000L) /* 100 msec */
+
+#define SK_HALFDUP_CHK_TIME (10000L) /* 10 msec */
+
+/*
+ * Define the error numbers and messages
+ */
+#define SKERR_SIRQ_E001 (SK_ERRBASE_SIRQ+0)
+#define SKERR_SIRQ_E001MSG "Unknown event"
+#define SKERR_SIRQ_E002 (SKERR_SIRQ_E001+1)
+#define SKERR_SIRQ_E002MSG "Packet timeout RX1"
+#define SKERR_SIRQ_E003 (SKERR_SIRQ_E002+1)
+#define SKERR_SIRQ_E003MSG "Packet timeout RX2"
+#define SKERR_SIRQ_E004 (SKERR_SIRQ_E003+1)
+#define SKERR_SIRQ_E004MSG "MAC 1 not correctly initialized"
+#define SKERR_SIRQ_E005 (SKERR_SIRQ_E004+1)
+#define SKERR_SIRQ_E005MSG "MAC 2 not correctly initialized"
+#define SKERR_SIRQ_E006 (SKERR_SIRQ_E005+1)
+#define SKERR_SIRQ_E006MSG "CHECK failure R1"
+#define SKERR_SIRQ_E007 (SKERR_SIRQ_E006+1)
+#define SKERR_SIRQ_E007MSG "CHECK failure R2"
+#define SKERR_SIRQ_E008 (SKERR_SIRQ_E007+1)
+#define SKERR_SIRQ_E008MSG "CHECK failure XS1"
+#define SKERR_SIRQ_E009 (SKERR_SIRQ_E008+1)
+#define SKERR_SIRQ_E009MSG "CHECK failure XA1"
+#define SKERR_SIRQ_E010 (SKERR_SIRQ_E009+1)
+#define SKERR_SIRQ_E010MSG "CHECK failure XS2"
+#define SKERR_SIRQ_E011 (SKERR_SIRQ_E010+1)
+#define SKERR_SIRQ_E011MSG "CHECK failure XA2"
+#define SKERR_SIRQ_E012 (SKERR_SIRQ_E011+1)
+#define SKERR_SIRQ_E012MSG "unexpected IRQ Master error"
+#define SKERR_SIRQ_E013 (SKERR_SIRQ_E012+1)
+#define SKERR_SIRQ_E013MSG "unexpected IRQ Status error"
+#define SKERR_SIRQ_E014 (SKERR_SIRQ_E013+1)
+#define SKERR_SIRQ_E014MSG "Parity error on RAM (read)"
+#define SKERR_SIRQ_E015 (SKERR_SIRQ_E014+1)
+#define SKERR_SIRQ_E015MSG "Parity error on RAM (write)"
+#define SKERR_SIRQ_E016 (SKERR_SIRQ_E015+1)
+#define SKERR_SIRQ_E016MSG "Parity error MAC 1"
+#define SKERR_SIRQ_E017 (SKERR_SIRQ_E016+1)
+#define SKERR_SIRQ_E017MSG "Parity error MAC 2"
+#define SKERR_SIRQ_E018 (SKERR_SIRQ_E017+1)
+#define SKERR_SIRQ_E018MSG "Parity error RX 1"
+#define SKERR_SIRQ_E019 (SKERR_SIRQ_E018+1)
+#define SKERR_SIRQ_E019MSG "Parity error RX 2"
+#define SKERR_SIRQ_E020 (SKERR_SIRQ_E019+1)
+#define SKERR_SIRQ_E020MSG "MAC transmit FIFO underrun"
+#define SKERR_SIRQ_E021 (SKERR_SIRQ_E020+1)
+#define SKERR_SIRQ_E021MSG "Spurious TWSI interrupt"
+#define SKERR_SIRQ_E022 (SKERR_SIRQ_E021+1)
+#define SKERR_SIRQ_E022MSG "Cable pair swap error"
+#define SKERR_SIRQ_E023 (SKERR_SIRQ_E022+1)
+#define SKERR_SIRQ_E023MSG "Auto-negotiation error"
+#define SKERR_SIRQ_E024 (SKERR_SIRQ_E023+1)
+#define SKERR_SIRQ_E024MSG "FIFO overflow error"
+
+extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus);
+extern int SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
+extern void SkHWLinkUp(SK_AC *pAC, SK_IOC IoC, int Port);
+extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port);
+
+#endif /* _INC_SKGESIRQ_H_ */
diff --git a/drivers/net/sk98lin/h/ski2c.h b/drivers/net/sk98lin/h/ski2c.h
new file mode 100644
index 0000000..5ffaf6e
--- /dev/null
+++ b/drivers/net/sk98lin/h/ski2c.h
@@ -0,0 +1,292 @@
+/******************************************************************************
+ *
+ * Name: ski2c.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.34 $
+ * Date: $Date: 2003/01/28 09:11:21 $
+ * Purpose: Defines to access Voltage and Temperature Sensor
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: ski2c.h,v $
+ * Revision 1.34 2003/01/28 09:11:21 rschmidt
+ * Editorial changes
+ *
+ * Revision 1.33 2002/10/14 16:40:50 rschmidt
+ * Editorial changes (TWSI)
+ *
+ * Revision 1.32 2002/08/13 08:55:07 rschmidt
+ * Editorial changes
+ *
+ * Revision 1.31 2002/08/06 09:44:22 jschmalz
+ * Extensions and changes for Yukon
+ *
+ * Revision 1.30 2001/04/05 11:38:09 rassmann
+ * Set SenState to idle in SkI2cWaitIrq().
+ * Changed error message in SkI2cWaitIrq().
+ *
+ * Revision 1.29 2000/08/03 14:28:17 rassmann
+ * - Added function to wait for I2C being ready before resetting the board.
+ * - Replaced one duplicate "out of range" message with correct one.
+ *
+ * Revision 1.28 1999/11/22 13:55:46 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.27 1999/05/20 09:23:10 cgoos
+ * Changes for 1000Base-T (Fan sensors).
+ *
+ * Revision 1.26 1998/12/01 13:45:47 gklug
+ * add: InitLevel to I2c struct
+ *
+ * Revision 1.25 1998/11/03 06:55:16 gklug
+ * add: Dummy Reads to I2c struct
+ *
+ * Revision 1.24 1998/10/02 14:28:59 cgoos
+ * Added prototype for SkI2cIsr.
+ *
+ * Revision 1.23 1998/09/08 12:20:11 gklug
+ * add: prototypes for init and read functions
+ *
+ * Revision 1.22 1998/09/08 07:37:56 gklug
+ * add: log error if PCI_IO voltage sensor could not be initialized
+ *
+ * Revision 1.21 1998/09/04 08:38:05 malthoff
+ * Change the values for I2C_READ and I2C_WRITE
+ *
+ * Revision 1.20 1998/08/25 07:52:22 gklug
+ * chg: Timestamps (last) added for logging
+ *
+ * Revision 1.19 1998/08/25 06:09:00 gklug
+ * rmv: warning and error levels of the individual sensors.
+ * add: timing definitions for sending traps and logging errors
+ *
+ * Revision 1.18 1998/08/20 11:41:15 gklug
+ * chg: omit STRCPY macro by using char * as Sensor Description
+ *
+ * Revision 1.17 1998/08/20 11:37:43 gklug
+ * chg: change Ioc to IoC
+ *
+ * Revision 1.16 1998/08/20 11:30:38 gklug
+ * fix: SenRead declaration
+ *
+ * Revision 1.15 1998/08/20 11:27:53 gklug
+ * fix: Compile bugs with new awrning constants
+ *
+ * Revision 1.14 1998/08/20 08:53:12 gklug
+ * fix: compiler errors
+ * add: Threshold values
+ *
+ * Revision 1.13 1998/08/19 12:21:16 gklug
+ * fix: remove struct from C files (see CCC)
+ * add: typedefs for all structs
+ *
+ * Revision 1.12 1998/08/19 10:57:41 gklug
+ * add: Warning levels
+ *
+ * Revision 1.11 1998/08/18 08:37:02 malthoff
+ * Prototypes not required for SK_DIAG.
+ *
+ * Revision 1.10 1998/08/17 13:54:00 gklug
+ * fix: declaration of event function
+ *
+ * Revision 1.9 1998/08/17 06:48:39 malthoff
+ * Remove some unrequired macros.
+ * Fix the compiler errors.
+ *
+ * Revision 1.8 1998/08/14 06:47:19 gklug
+ * fix: Values are intergers
+ *
+ * Revision 1.7 1998/08/14 06:26:05 gklug
+ * add: Init error message
+ *
+ * Revision 1.6 1998/08/13 08:31:08 gklug
+ * add: Error message
+ *
+ * Revision 1.5 1998/08/12 14:32:04 gklug
+ * add: new error code/message
+ *
+ * Revision 1.4 1998/08/12 13:39:08 gklug
+ * chg: names of error messages
+ * add: defines for Sensor type and thresholds
+ *
+ * Revision 1.3 1998/08/11 07:57:16 gklug
+ * add: sensor struct
+ * add: Timeout defines
+ * add: I2C control struct for pAC
+ *
+ * Revision 1.2 1998/07/17 11:29:02 gklug
+ * rmv: Microwire and SMTPANIC
+ *
+ * Revision 1.1 1998/06/19 14:30:10 malthoff
+ * Created. Sources taken from ML Project.
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * SKI2C.H contains all I2C specific defines
+ */
+
+#ifndef _SKI2C_H_
+#define _SKI2C_H_
+
+typedef struct s_Sensor SK_SENSOR;
+
+#include "h/skgei2c.h"
+
+/*
+ * Define the I2C events.
+ */
+#define SK_I2CEV_IRQ 1 /* IRQ happened Event */
+#define SK_I2CEV_TIM 2 /* Timeout event */
+#define SK_I2CEV_CLEAR 3 /* Clear MIB Values */
+
+/*
+ * Define READ and WRITE Constants.
+ */
+#undef I2C_READ /* just in case */
+#undef I2C_WRITE /* just in case */
+#define I2C_READ 0
+#define I2C_WRITE 1
+#define I2C_BURST 1
+#define I2C_SINGLE 0
+
+#define SKERR_I2C_E001 (SK_ERRBASE_I2C+0)
+#define SKERR_I2C_E001MSG "Sensor index unknown"
+#define SKERR_I2C_E002 (SKERR_I2C_E001+1)
+#define SKERR_I2C_E002MSG "TWSI: transfer does not complete"
+#define SKERR_I2C_E003 (SKERR_I2C_E002+1)
+#define SKERR_I2C_E003MSG "LM80: NAK on device send"
+#define SKERR_I2C_E004 (SKERR_I2C_E003+1)
+#define SKERR_I2C_E004MSG "LM80: NAK on register send"
+#define SKERR_I2C_E005 (SKERR_I2C_E004+1)
+#define SKERR_I2C_E005MSG "LM80: NAK on device (2) send"
+#define SKERR_I2C_E006 (SKERR_I2C_E005+1)
+#define SKERR_I2C_E006MSG "Unknown event"
+#define SKERR_I2C_E007 (SKERR_I2C_E006+1)
+#define SKERR_I2C_E007MSG "LM80 read out of state"
+#define SKERR_I2C_E008 (SKERR_I2C_E007+1)
+#define SKERR_I2C_E008MSG "Unexpected sensor read completed"
+#define SKERR_I2C_E009 (SKERR_I2C_E008+1)
+#define SKERR_I2C_E009MSG "WARNING: temperature sensor out of range"
+#define SKERR_I2C_E010 (SKERR_I2C_E009+1)
+#define SKERR_I2C_E010MSG "WARNING: voltage sensor out of range"
+#define SKERR_I2C_E011 (SKERR_I2C_E010+1)
+#define SKERR_I2C_E011MSG "ERROR: temperature sensor out of range"
+#define SKERR_I2C_E012 (SKERR_I2C_E011+1)
+#define SKERR_I2C_E012MSG "ERROR: voltage sensor out of range"
+#define SKERR_I2C_E013 (SKERR_I2C_E012+1)
+#define SKERR_I2C_E013MSG "ERROR: couldn't init sensor"
+#define SKERR_I2C_E014 (SKERR_I2C_E013+1)
+#define SKERR_I2C_E014MSG "WARNING: fan sensor out of range"
+#define SKERR_I2C_E015 (SKERR_I2C_E014+1)
+#define SKERR_I2C_E015MSG "ERROR: fan sensor out of range"
+#define SKERR_I2C_E016 (SKERR_I2C_E015+1)
+#define SKERR_I2C_E016MSG "TWSI: active transfer does not complete"
+
+/*
+ * Define Timeout values
+ */
+#define SK_I2C_TIM_LONG 2000000L /* 2 seconds */
+#define SK_I2C_TIM_SHORT 100000L /* 100 milliseconds */
+#define SK_I2C_TIM_WATCH 1000000L /* 1 second */
+
+/*
+ * Define trap and error log hold times
+ */
+#ifndef SK_SEN_ERR_TR_HOLD
+#define SK_SEN_ERR_TR_HOLD (4*SK_TICKS_PER_SEC)
+#endif
+#ifndef SK_SEN_ERR_LOG_HOLD
+#define SK_SEN_ERR_LOG_HOLD (60*SK_TICKS_PER_SEC)
+#endif
+#ifndef SK_SEN_WARN_TR_HOLD
+#define SK_SEN_WARN_TR_HOLD (15*SK_TICKS_PER_SEC)
+#endif
+#ifndef SK_SEN_WARN_LOG_HOLD
+#define SK_SEN_WARN_LOG_HOLD (15*60*SK_TICKS_PER_SEC)
+#endif
+
+/*
+ * Defines for SenType
+ */
+#define SK_SEN_UNKNOWN 0
+#define SK_SEN_TEMP 1
+#define SK_SEN_VOLT 2
+#define SK_SEN_FAN 3
+
+/*
+ * Define for the SenErrorFlag
+ */
+#define SK_SEN_ERR_NOT_PRESENT 0 /* Error Flag: Sensor not present */
+#define SK_SEN_ERR_OK 1 /* Error Flag: O.K. */
+#define SK_SEN_ERR_WARN 2 /* Error Flag: Warning */
+#define SK_SEN_ERR_ERR 3 /* Error Flag: Error */
+#define SK_SEN_ERR_FAULTY 4 /* Error Flag: Faulty */
+
+/*
+ * Define the Sensor struct
+ */
+struct s_Sensor {
+ char *SenDesc; /* Description */
+ int SenType; /* Voltage or Temperature */
+ SK_I32 SenValue; /* Current value of the sensor */
+ SK_I32 SenThreErrHigh; /* High error Threshhold of this sensor */
+ SK_I32 SenThreWarnHigh; /* High warning Threshhold of this sensor */
+ SK_I32 SenThreErrLow; /* Lower error Threshold of the sensor */
+ SK_I32 SenThreWarnLow; /* Lower warning Threshold of the sensor */
+ int SenErrFlag; /* Sensor indicated an error */
+ SK_BOOL SenInit; /* Is sensor initialized ? */
+ SK_U64 SenErrCts; /* Error trap counter */
+ SK_U64 SenWarnCts; /* Warning trap counter */
+ SK_U64 SenBegErrTS; /* Begin error timestamp */
+ SK_U64 SenBegWarnTS; /* Begin warning timestamp */
+ SK_U64 SenLastErrTrapTS; /* Last error trap timestamp */
+ SK_U64 SenLastErrLogTS; /* Last error log timestamp */
+ SK_U64 SenLastWarnTrapTS; /* Last warning trap timestamp */
+ SK_U64 SenLastWarnLogTS; /* Last warning log timestamp */
+ int SenState; /* Sensor State (see HW specific include) */
+ int (*SenRead)(SK_AC *pAC, SK_IOC IoC, struct s_Sensor *pSen);
+ /* Sensors read function */
+ SK_U16 SenReg; /* Register Address for this sensor */
+ SK_U8 SenDev; /* Device Selection for this sensor */
+};
+
+typedef struct s_I2c {
+ SK_SENSOR SenTable[SK_MAX_SENSORS]; /* Sensor Table */
+ int CurrSens; /* Which sensor is currently queried */
+ int MaxSens; /* Max. number of sensors */
+ int TimerMode; /* Use the timer also to watch the state machine */
+ int InitLevel; /* Initialized Level */
+#ifndef SK_DIAG
+ int DummyReads; /* Number of non-checked dummy reads */
+ SK_TIMER SenTimer; /* Sensors timer */
+#endif /* !SK_DIAG */
+} SK_I2C;
+
+extern int SkI2cReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
+#ifndef SK_DIAG
+extern int SkI2cEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
+extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level);
+extern void SkI2cWaitIrq(SK_AC *pAC, SK_IOC IoC);
+extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC);
+
+#endif
+#endif /* n_SKI2C_H */
diff --git a/drivers/net/sk98lin/h/skqueue.h b/drivers/net/sk98lin/h/skqueue.h
new file mode 100644
index 0000000..bce20a7
--- /dev/null
+++ b/drivers/net/sk98lin/h/skqueue.h
@@ -0,0 +1,147 @@
+/******************************************************************************
+ *
+ * Name: skqueue.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.14 $
+ * Date: $Date: 2002/03/15 10:52:13 $
+ * Purpose: Defines for the Event queue
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skqueue.h,v $
+ * Revision 1.14 2002/03/15 10:52:13 mkunz
+ * Added event classes for link aggregation
+ *
+ * Revision 1.13 1999/11/22 13:59:05 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.12 1998/09/08 08:48:01 gklug
+ * add: init level handling
+ *
+ * Revision 1.11 1998/09/03 14:15:11 gklug
+ * add: CSUM and HWAC Eventclass and function.
+ * fix: pParaPtr according to CCC
+ *
+ * Revision 1.10 1998/08/20 12:43:03 gklug
+ * add: typedef SK_QUEUE
+ *
+ * Revision 1.9 1998/08/19 09:50:59 gklug
+ * fix: remove struct keyword from c-code (see CCC) add typedefs
+ *
+ * Revision 1.8 1998/08/18 07:00:01 gklug
+ * fix: SK_PTR not defined use void * instead.
+ *
+ * Revision 1.7 1998/08/17 13:43:19 gklug
+ * chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR
+ *
+ * Revision 1.6 1998/08/14 07:09:30 gklug
+ * fix: chg pAc -> pAC
+ *
+ * Revision 1.5 1998/08/11 14:26:44 gklug
+ * chg: Event Dispatcher returns now int.
+ *
+ * Revision 1.4 1998/08/11 12:15:21 gklug
+ * add: Error numbers of skqueue module
+ *
+ * Revision 1.3 1998/08/07 12:54:23 gklug
+ * fix: first compiled version
+ *
+ * Revision 1.2 1998/08/07 09:34:00 gklug
+ * adapt structure defs to CCC
+ * add: prototypes for functions
+ *
+ * Revision 1.1 1998/07/30 14:52:12 gklug
+ * Initial version.
+ * Defines Event Classes, Event structs and queue management variables.
+ *
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * SKQUEUE.H contains all defines and types for the event queue
+ */
+
+#ifndef _SKQUEUE_H_
+#define _SKQUEUE_H_
+
+
+/*
+ * define the event classes to be served
+ */
+#define SKGE_DRV 1 /* Driver Event Class */
+#define SKGE_RLMT 2 /* RLMT Event Class */
+#define SKGE_I2C 3 /* i2C Event Class */
+#define SKGE_PNMI 4 /* PNMI Event Class */
+#define SKGE_CSUM 5 /* Checksum Event Class */
+#define SKGE_HWAC 6 /* Hardware Access Event Class */
+
+#define SKGE_SWT 9 /* Software Timer Event Class */
+#define SKGE_LACP 10 /* LACP Aggregation Event Class */
+#define SKGE_RSF 11 /* RSF Aggregation Event Class */
+#define SKGE_MARKER 12 /* MARKER Aggregation Event Class */
+#define SKGE_FD 13 /* FD Distributor Event Class */
+
+/*
+ * define event queue as circular buffer
+ */
+#define SK_MAX_EVENT 64
+
+/*
+ * Parameter union for the Para stuff
+ */
+typedef union u_EvPara {
+ void *pParaPtr; /* Parameter Pointer */
+ SK_U64 Para64; /* Parameter 64bit version */
+ SK_U32 Para32[2]; /* Parameter Array of 32bit parameters */
+} SK_EVPARA;
+
+/*
+ * Event Queue
+ * skqueue.c
+ * events are class/value pairs
+ * class is addressee, e.g. RMT, PCM etc.
+ * value is command, e.g. line state change, ring op change etc.
+ */
+typedef struct s_EventElem {
+ SK_U32 Class ; /* Event class */
+ SK_U32 Event ; /* Event value */
+ SK_EVPARA Para ; /* Event parameter */
+} SK_EVENTELEM;
+
+typedef struct s_Queue {
+ SK_EVENTELEM EvQueue[SK_MAX_EVENT];
+ SK_EVENTELEM *EvPut ;
+ SK_EVENTELEM *EvGet ;
+} SK_QUEUE;
+
+extern void SkEventInit(SK_AC *pAC, SK_IOC Ioc, int Level);
+extern void SkEventQueue(SK_AC *pAC, SK_U32 Class, SK_U32 Event,
+ SK_EVPARA Para);
+extern int SkEventDispatcher(SK_AC *pAC,SK_IOC Ioc);
+
+
+/* Define Error Numbers and messages */
+#define SKERR_Q_E001 (SK_ERRBASE_QUEUE+0)
+#define SKERR_Q_E001MSG "Event queue overflow"
+#define SKERR_Q_E002 (SKERR_Q_E001+1)
+#define SKERR_Q_E002MSG "Undefined event class"
+#endif /* _SKQUEUE_H_ */
diff --git a/drivers/net/sk98lin/h/skrlmt.h b/drivers/net/sk98lin/h/skrlmt.h
new file mode 100644
index 0000000..04d025b
--- /dev/null
+++ b/drivers/net/sk98lin/h/skrlmt.h
@@ -0,0 +1,563 @@
+/******************************************************************************
+ *
+ * Name: skrlmt.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.35 $
+ * Date: $Date: 2003/01/31 14:12:41 $
+ * Purpose: Header file for Redundant Link ManagemenT.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skrlmt.h,v $
+ * Revision 1.35 2003/01/31 14:12:41 mkunz
+ * single port adapter runs now with two identical MAC addresses
+ *
+ * Revision 1.34 2002/09/23 15:13:41 rwahl
+ * Editorial changes.
+ *
+ * Revision 1.33 2001/07/03 12:16:48 mkunz
+ * New Flag ChgBcPrio (Change priority of last broadcast received)
+ *
+ * Revision 1.32 2001/02/14 14:06:31 rassmann
+ * Editorial changes.
+ *
+ * Revision 1.31 2001/02/05 14:25:26 rassmann
+ * Prepared RLMT for transparent operation.
+ *
+ * Revision 1.30 2001/01/22 13:41:39 rassmann
+ * Supporting two nets on dual-port adapters.
+ *
+ * Revision 1.29 2000/11/17 08:58:00 rassmann
+ * Moved CheckSwitch from SK_RLMT_PACKET_RECEIVED to SK_RLMT_TIM event.
+ *
+ * Revision 1.28 2000/11/09 12:24:34 rassmann
+ * Editorial changes.
+ *
+ * Revision 1.27 1999/11/22 13:59:56 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.26 1999/10/04 14:01:19 rassmann
+ * Corrected reaction to reception of BPDU frames (#10441).
+ *
+ * Revision 1.25 1999/07/20 12:53:39 rassmann
+ * Fixed documentation errors for lookahead macros.
+ *
+ * Revision 1.24 1999/05/28 11:15:56 rassmann
+ * Changed behaviour to reflect Design Spec v1.2.
+ * Controlling Link LED(s).
+ * Introduced RLMT Packet Version field in RLMT Packet.
+ * Newstyle lookahead macros (checking meta-information before looking at
+ * the packet).
+ *
+ * Revision 1.23 1999/01/28 12:50:42 rassmann
+ * Not using broadcast time stamps in CheckLinkState mode.
+ *
+ * Revision 1.22 1999/01/27 14:13:04 rassmann
+ * Monitoring broadcast traffic.
+ * Switching more reliably and not too early if switch is
+ * configured for spanning tree.
+ *
+ * Revision 1.21 1998/12/08 13:11:25 rassmann
+ * Stopping SegTimer at RlmtStop.
+ *
+ * Revision 1.20 1998/11/24 12:37:33 rassmann
+ * Implemented segmentation check.
+ *
+ * Revision 1.19 1998/11/17 13:43:06 rassmann
+ * Handling (logical) tx failure.
+ * Sending packet on logical address after PORT_SWITCH.
+ *
+ * Revision 1.18 1998/11/13 16:56:56 rassmann
+ * Added macro version of SkRlmtLookaheadPacket.
+ *
+ * Revision 1.17 1998/11/06 18:06:05 rassmann
+ * Corrected timing when RLMT checks fail.
+ * Clearing tx counter earlier in periodical checks.
+ *
+ * Revision 1.16 1998/11/03 13:53:50 rassmann
+ * RLMT should switch now (at least in mode 3).
+ *
+ * Revision 1.15 1998/10/22 11:39:52 rassmann
+ * Corrected signed/unsigned mismatches.
+ * Corrected receive list handling and address recognition.
+ *
+ * Revision 1.14 1998/10/15 15:16:36 rassmann
+ * Finished Spanning Tree checking.
+ * Checked with lint.
+ *
+ * Revision 1.13 1998/09/24 19:16:08 rassmann
+ * Code cleanup.
+ * Introduced Timer for PORT_DOWN due to no RX.
+ *
+ * Revision 1.12 1998/09/16 11:09:52 rassmann
+ * Syntax corrections.
+ *
+ * Revision 1.11 1998/09/15 11:28:50 rassmann
+ * Syntax corrections.
+ *
+ * Revision 1.10 1998/09/14 17:07:38 rassmann
+ * Added code for port checking via LAN.
+ * Changed Mbuf definition.
+ *
+ * Revision 1.9 1998/09/07 11:14:15 rassmann
+ * Syntax corrections.
+ *
+ * Revision 1.8 1998/09/07 09:06:08 rassmann
+ * Syntax corrections.
+ *
+ * Revision 1.7 1998/09/04 19:41:34 rassmann
+ * Syntax corrections.
+ * Started entering code for checking local links.
+ *
+ * Revision 1.6 1998/09/04 12:14:28 rassmann
+ * Interface cleanup.
+ *
+ * Revision 1.5 1998/09/02 16:55:29 rassmann
+ * Updated to reflect new DRV/HWAC/RLMT interface.
+ *
+ * Revision 1.4 1998/09/02 07:26:02 afischer
+ * typedef for SK_RLMT_PORT
+ *
+ * Revision 1.3 1998/08/27 14:29:03 rassmann
+ * Code cleanup.
+ *
+ * Revision 1.2 1998/08/27 14:26:25 rassmann
+ * Updated interface.
+ *
+ * Revision 1.1 1998/08/21 08:29:10 rassmann
+ * First public version.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the header file for Redundant Link ManagemenT.
+ *
+ * Include File Hierarchy:
+ *
+ * "skdrv1st.h"
+ * ...
+ * "sktypes.h"
+ * "skqueue.h"
+ * "skaddr.h"
+ * "skrlmt.h"
+ * ...
+ * "skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKRLMT_H
+#define __INC_SKRLMT_H
+
+#ifdef __cplusplus
+#error C++ is not yet supported.
+extern "C" {
+#endif /* cplusplus */
+
+/* defines ********************************************************************/
+
+#define SK_RLMT_NET_DOWN_TEMP 1 /* NET_DOWN due to last port down. */
+#define SK_RLMT_NET_DOWN_FINAL 2 /* NET_DOWN due to RLMT_STOP. */
+
+/* ----- Default queue sizes - must be multiples of 8 KB ----- */
+
+/* Less than 8 KB free in RX queue => pause frames. */
+#define SK_RLMT_STANDBY_QRXSIZE 128 /* Size of rx standby queue in KB. */
+#define SK_RLMT_STANDBY_QXASIZE 32 /* Size of async standby queue in KB. */
+#define SK_RLMT_STANDBY_QXSSIZE 0 /* Size of sync standby queue in KB. */
+
+#define SK_RLMT_MAX_TX_BUF_SIZE 60 /* Maximum RLMT transmit size. */
+
+/* ----- PORT states ----- */
+
+#define SK_RLMT_PS_INIT 0 /* Port state: Init. */
+#define SK_RLMT_PS_LINK_DOWN 1 /* Port state: Link down. */
+#define SK_RLMT_PS_DOWN 2 /* Port state: Port down. */
+#define SK_RLMT_PS_GOING_UP 3 /* Port state: Going up. */
+#define SK_RLMT_PS_UP 4 /* Port state: Up. */
+
+/* ----- RLMT states ----- */
+
+#define SK_RLMT_RS_INIT 0 /* RLMT state: Init. */
+#define SK_RLMT_RS_NET_DOWN 1 /* RLMT state: Net down. */
+#define SK_RLMT_RS_NET_UP 2 /* RLMT state: Net up. */
+
+/* ----- PORT events ----- */
+
+#define SK_RLMT_LINK_UP 1001 /* Link came up. */
+#define SK_RLMT_LINK_DOWN 1002 /* Link went down. */
+#define SK_RLMT_PORT_ADDR 1003 /* Port address changed. */
+
+/* ----- RLMT events ----- */
+
+#define SK_RLMT_START 2001 /* Start RLMT. */
+#define SK_RLMT_STOP 2002 /* Stop RLMT. */
+#define SK_RLMT_PACKET_RECEIVED 2003 /* Packet was received for RLMT. */
+#define SK_RLMT_STATS_CLEAR 2004 /* Clear statistics. */
+#define SK_RLMT_STATS_UPDATE 2005 /* Update statistics. */
+#define SK_RLMT_PREFPORT_CHANGE 2006 /* Change preferred port. */
+#define SK_RLMT_MODE_CHANGE 2007 /* New RlmtMode. */
+#define SK_RLMT_SET_NETS 2008 /* Number of Nets (1 or 2). */
+
+/* ----- RLMT mode bits ----- */
+
+/*
+ * CAUTION: These defines are private to RLMT.
+ * Please use the RLMT mode defines below.
+ */
+
+#define SK_RLMT_CHECK_LINK 1 /* Check Link. */
+#define SK_RLMT_CHECK_LOC_LINK 2 /* Check other link on same adapter. */
+#define SK_RLMT_CHECK_SEG 4 /* Check segmentation. */
+
+#ifndef RLMT_CHECK_REMOTE
+#define SK_RLMT_CHECK_OTHERS SK_RLMT_CHECK_LOC_LINK
+#else /* RLMT_CHECK_REMOTE */
+#define SK_RLMT_CHECK_REM_LINK 8 /* Check link(s) on other adapter(s). */
+#define SK_RLMT_MAX_REMOTE_PORTS_CHECKED 3
+#define SK_RLMT_CHECK_OTHERS \
+ (SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK)
+#endif /* RLMT_CHECK_REMOTE */
+
+#ifndef SK_RLMT_ENABLE_TRANSPARENT
+#define SK_RLMT_TRANSPARENT 0 /* RLMT transparent - inactive. */
+#else /* SK_RLMT_ENABLE_TRANSPARENT */
+#define SK_RLMT_TRANSPARENT 128 /* RLMT transparent. */
+#endif /* SK_RLMT_ENABLE_TRANSPARENT */
+
+/* ----- RLMT modes ----- */
+
+/* Check Link State. */
+#define SK_RLMT_MODE_CLS (SK_RLMT_CHECK_LINK)
+
+/* Check Local Ports: check other links on the same adapter. */
+#define SK_RLMT_MODE_CLP (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK)
+
+/* Check Local Ports and Segmentation Status. */
+#define SK_RLMT_MODE_CLPSS \
+ (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_SEG)
+
+#ifdef RLMT_CHECK_REMOTE
+/* Check Local and Remote Ports: check links (local or remote). */
+ Name of define TBD!
+#define SK_RLMT_MODE_CRP \
+ (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK)
+
+/* Check Local and Remote Ports and Segmentation Status. */
+ Name of define TBD!
+#define SK_RLMT_MODE_CRPSS \
+ (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | \
+ SK_RLMT_CHECK_REM_LINK | SK_RLMT_CHECK_SEG)
+#endif /* RLMT_CHECK_REMOTE */
+
+/* ----- RLMT lookahead result bits ----- */
+
+#define SK_RLMT_RX_RLMT 1 /* Give packet to RLMT. */
+#define SK_RLMT_RX_PROTOCOL 2 /* Give packet to protocol. */
+
+/* Macros */
+
+#if 0
+SK_AC *pAC /* adapter context */
+SK_U32 PortNum /* receiving port */
+unsigned PktLen /* received packet's length */
+SK_BOOL IsBc /* Flag: packet is broadcast */
+unsigned *pOffset /* offs. of bytes to present to SK_RLMT_LOOKAHEAD */
+unsigned *pNumBytes /* #Bytes to present to SK_RLMT_LOOKAHEAD */
+#endif /* 0 */
+
+#define SK_RLMT_PRE_LOOKAHEAD(pAC,PortNum,PktLen,IsBc,pOffset,pNumBytes) { \
+ SK_AC *_pAC; \
+ SK_U32 _PortNum; \
+ _pAC = (pAC); \
+ _PortNum = (SK_U32)(PortNum); \
+ /* _pAC->Rlmt.Port[_PortNum].PacketsRx++; */ \
+ _pAC->Rlmt.Port[_PortNum].PacketsPerTimeSlot++; \
+ if (_pAC->Rlmt.RlmtOff) { \
+ *(pNumBytes) = 0; \
+ } \
+ else {\
+ if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \
+ *(pNumBytes) = 0; \
+ } \
+ else if (IsBc) { \
+ if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \
+ *(pNumBytes) = 6; \
+ *(pOffset) = 6; \
+ } \
+ else { \
+ *(pNumBytes) = 0; \
+ } \
+ } \
+ else { \
+ if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \
+ /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+ *(pNumBytes) = 0; \
+ } \
+ else { \
+ *(pNumBytes) = 6; \
+ *(pOffset) = 0; \
+ } \
+ } \
+ } \
+}
+
+#if 0
+SK_AC *pAC /* adapter context */
+SK_U32 PortNum /* receiving port */
+SK_U8 *pLaPacket, /* received packet's data (points to pOffset) */
+SK_BOOL IsBc /* Flag: packet is broadcast */
+SK_BOOL IsMc /* Flag: packet is multicast */
+unsigned *pForRlmt /* Result: bits SK_RLMT_RX_RLMT, SK_RLMT_RX_PROTOCOL */
+SK_RLMT_LOOKAHEAD() expects *pNumBytes from
+packet offset *pOffset (s.a.) at *pLaPacket.
+
+If you use SK_RLMT_LOOKAHEAD in a path where you already know if the packet is
+BC, MC, or UC, you should use constants for IsBc and IsMc, so that your compiler
+can trash unneeded parts of the if construction.
+#endif /* 0 */
+
+#define SK_RLMT_LOOKAHEAD(pAC,PortNum,pLaPacket,IsBc,IsMc,pForRlmt) { \
+ SK_AC *_pAC; \
+ SK_U32 _PortNum; \
+ SK_U8 *_pLaPacket; \
+ _pAC = (pAC); \
+ _PortNum = (SK_U32)(PortNum); \
+ _pLaPacket = (SK_U8 *)(pLaPacket); \
+ if (IsBc) {\
+ if (!SK_ADDR_EQUAL(_pLaPacket, _pAC->Addr.Net[_pAC->Rlmt.Port[ \
+ _PortNum].Net->NetNumber].CurrentMacAddress.a)) { \
+ _pAC->Rlmt.Port[_PortNum].BcTimeStamp = SkOsGetTime(_pAC); \
+ _pAC->Rlmt.CheckSwitch = SK_TRUE; \
+ } \
+ /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+ *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+ } \
+ else if (IsMc) { \
+ if (SK_ADDR_EQUAL(_pLaPacket, BridgeMcAddr.a)) { \
+ _pAC->Rlmt.Port[_PortNum].BpduPacketsPerTimeSlot++; \
+ if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_CHECK_SEG) { \
+ *(pForRlmt) = SK_RLMT_RX_RLMT | SK_RLMT_RX_PROTOCOL; \
+ } \
+ else { \
+ *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+ } \
+ } \
+ else if (SK_ADDR_EQUAL(_pLaPacket, SkRlmtMcAddr.a)) { \
+ *(pForRlmt) = SK_RLMT_RX_RLMT; \
+ } \
+ else { \
+ /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+ *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+ } \
+ } \
+ else { \
+ if (SK_ADDR_EQUAL( \
+ _pLaPacket, \
+ _pAC->Addr.Port[_PortNum].CurrentMacAddress.a)) { \
+ *(pForRlmt) = SK_RLMT_RX_RLMT; \
+ } \
+ else { \
+ /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+ *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+ } \
+ } \
+}
+
+#ifdef SK_RLMT_FAST_LOOKAHEAD
+Error: SK_RLMT_FAST_LOOKAHEAD no longer used. Use new macros for lookahead.
+#endif /* SK_RLMT_FAST_LOOKAHEAD */
+#ifdef SK_RLMT_SLOW_LOOKAHEAD
+Error: SK_RLMT_SLOW_LOOKAHEAD no longer used. Use new macros for lookahead.
+#endif /* SK_RLMT_SLOW_LOOKAHEAD */
+
+/* typedefs *******************************************************************/
+
+#ifdef SK_RLMT_MBUF_PRIVATE
+typedef struct s_RlmtMbuf {
+ some content
+} SK_RLMT_MBUF;
+#endif /* SK_RLMT_MBUF_PRIVATE */
+
+
+#ifdef SK_LA_INFO
+typedef struct s_Rlmt_PacketInfo {
+ unsigned PacketLength; /* Length of packet. */
+ unsigned PacketType; /* Directed/Multicast/Broadcast. */
+} SK_RLMT_PINFO;
+#endif /* SK_LA_INFO */
+
+
+typedef struct s_RootId {
+ SK_U8 Id[8]; /* Root Bridge Id. */
+} SK_RLMT_ROOT_ID;
+
+
+typedef struct s_port {
+ SK_MAC_ADDR CheckAddr;
+ SK_BOOL SuspectTx;
+} SK_PORT_CHECK;
+
+
+typedef struct s_RlmtNet SK_RLMT_NET;
+
+
+typedef struct s_RlmtPort {
+
+/* ----- Public part (read-only) ----- */
+
+ SK_U8 PortState; /* Current state of this port. */
+
+ /* For PNMI */
+ SK_BOOL LinkDown;
+ SK_BOOL PortDown;
+ SK_U8 Align01;
+
+ SK_U32 PortNumber; /* Number of port on adapter. */
+ SK_RLMT_NET * Net; /* Net port belongs to. */
+
+ SK_U64 TxHelloCts;
+ SK_U64 RxHelloCts;
+ SK_U64 TxSpHelloReqCts;
+ SK_U64 RxSpHelloCts;
+
+/* ----- Private part ----- */
+
+/* SK_U64 PacketsRx; */ /* Total packets received. */
+ SK_U32 PacketsPerTimeSlot; /* Packets rxed between TOs. */
+/* SK_U32 DataPacketsPerTimeSlot; */ /* Data packets ... */
+ SK_U32 BpduPacketsPerTimeSlot; /* BPDU packets rxed in TS. */
+ SK_U64 BcTimeStamp; /* Time of last BC receive. */
+ SK_U64 GuTimeStamp; /* Time of entering GOING_UP. */
+
+ SK_TIMER UpTimer; /* Timer struct Link/Port up. */
+ SK_TIMER DownRxTimer; /* Timer struct down rx. */
+ SK_TIMER DownTxTimer; /* Timer struct down tx. */
+
+ SK_U32 CheckingState; /* Checking State. */
+
+ SK_ADDR_PORT * AddrPort;
+
+ SK_U8 Random[4]; /* Random value. */
+ unsigned PortsChecked; /* #ports checked. */
+ unsigned PortsSuspect; /* #ports checked that are s. */
+ SK_PORT_CHECK PortCheck[1];
+/* SK_PORT_CHECK PortCheck[SK_MAX_MACS - 1]; */
+
+ SK_BOOL PortStarted; /* Port is started. */
+ SK_BOOL PortNoRx; /* NoRx for >= 1 time slot. */
+ SK_BOOL RootIdSet;
+ SK_RLMT_ROOT_ID Root; /* Root Bridge Id. */
+} SK_RLMT_PORT;
+
+
+struct s_RlmtNet {
+
+/* ----- Public part (read-only) ----- */
+
+ SK_U32 NetNumber; /* Number of net. */
+
+ SK_RLMT_PORT * Port[SK_MAX_MACS]; /* Ports that belong to this net. */
+ SK_U32 NumPorts; /* Number of ports. */
+ SK_U32 PrefPort; /* Preferred port. */
+
+ /* For PNMI */
+
+ SK_U32 ChgBcPrio; /* Change Priority of last broadcast received */
+ SK_U32 RlmtMode; /* Check ... */
+ SK_U32 ActivePort; /* Active port. */
+ SK_U32 Preference; /* 0xFFFFFFFF: Automatic. */
+
+ SK_U8 RlmtState; /* Current RLMT state. */
+
+/* ----- Private part ----- */
+ SK_BOOL RootIdSet;
+ SK_U16 Align01;
+
+ int LinksUp; /* #Links up. */
+ int PortsUp; /* #Ports up. */
+ SK_U32 TimeoutValue; /* RLMT timeout value. */
+
+ SK_U32 CheckingState; /* Checking State. */
+ SK_RLMT_ROOT_ID Root; /* Root Bridge Id. */
+
+ SK_TIMER LocTimer; /* Timer struct. */
+ SK_TIMER SegTimer; /* Timer struct. */
+};
+
+
+typedef struct s_Rlmt {
+
+/* ----- Public part (read-only) ----- */
+
+ SK_U32 NumNets; /* Number of nets. */
+ SK_U32 NetsStarted; /* Number of nets started. */
+ SK_RLMT_NET Net[SK_MAX_NETS]; /* Array of available nets. */
+ SK_RLMT_PORT Port[SK_MAX_MACS]; /* Array of available ports. */
+
+/* ----- Private part ----- */
+ SK_BOOL CheckSwitch;
+ SK_BOOL RlmtOff; /* set to zero if the Mac addresses
+ are equal or the second one
+ is zero */
+ SK_U16 Align01;
+
+} SK_RLMT;
+
+
+extern SK_MAC_ADDR BridgeMcAddr;
+extern SK_MAC_ADDR SkRlmtMcAddr;
+
+/* function prototypes ********************************************************/
+
+
+#ifndef SK_KR_PROTO
+
+/* Functions provided by SkRlmt */
+
+/* ANSI/C++ compliant function prototypes */
+
+extern void SkRlmtInit(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int Level);
+
+extern int SkRlmtEvent(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 Event,
+ SK_EVPARA Para);
+
+#else /* defined(SK_KR_PROTO) */
+
+/* Non-ANSI/C++ compliant function prototypes */
+
+#error KR-style function prototypes are not yet provided.
+
+#endif /* defined(SK_KR_PROTO)) */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INC_SKRLMT_H */
diff --git a/drivers/net/sk98lin/h/sktimer.h b/drivers/net/sk98lin/h/sktimer.h
new file mode 100644
index 0000000..36f8ccb
--- /dev/null
+++ b/drivers/net/sk98lin/h/sktimer.h
@@ -0,0 +1,99 @@
+/******************************************************************************
+ *
+ * Name: sktimer.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.9 $
+ * Date: $Date: 1999/11/22 14:00:29 $
+ * Purpose: Defines for the timer functions
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: sktimer.h,v $
+ * Revision 1.9 1999/11/22 14:00:29 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.8 1998/09/08 08:48:02 gklug
+ * add: init level handling
+ *
+ * Revision 1.7 1998/08/20 12:31:29 gklug
+ * fix: SK_TIMCTRL needs to be defined
+ *
+ * Revision 1.6 1998/08/19 09:51:00 gklug
+ * fix: remove struct keyword from c-code (see CCC) add typedefs
+ *
+ * Revision 1.5 1998/08/17 13:43:21 gklug
+ * chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR
+ *
+ * Revision 1.4 1998/08/14 07:09:31 gklug
+ * fix: chg pAc -> pAC
+ *
+ * Revision 1.3 1998/08/07 12:54:24 gklug
+ * fix: first compiled version
+ *
+ * Revision 1.2 1998/08/07 09:35:29 gklug
+ * add: Timer control struct for Adapters context
+ * add: function prototypes
+ *
+ * Revision 1.1 1998/08/05 11:27:01 gklug
+ * First version: adapted from SMT
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * SKTIMER.H contains all defines and types for the timer functions
+ */
+
+#ifndef _SKTIMER_H_
+#define _SKTIMER_H_
+
+#include "h/skqueue.h"
+
+/*
+ * SK timer
+ * - needed wherever a timer is used. Put this in your data structure
+ * wherever you want.
+ */
+typedef struct s_Timer SK_TIMER;
+
+struct s_Timer {
+ SK_TIMER *TmNext ; /* linked list */
+ SK_U32 TmClass ; /* Timer Event class */
+ SK_U32 TmEvent ; /* Timer Event value */
+ SK_EVPARA TmPara ; /* Timer Event parameter */
+ SK_U32 TmDelta ; /* delta time */
+ int TmActive ; /* flag : active/inactive */
+} ;
+
+/*
+ * Timer control struct.
+ * - use in Adapters context name pAC->Tim
+ */
+typedef struct s_TimCtrl {
+ SK_TIMER *StQueue ; /* Head of Timer queue */
+} SK_TIMCTRL ;
+
+extern void SkTimerInit(SK_AC *pAC,SK_IOC Ioc, int Level);
+extern void SkTimerStop(SK_AC *pAC,SK_IOC Ioc,SK_TIMER *pTimer);
+extern void SkTimerStart(SK_AC *pAC,SK_IOC Ioc,SK_TIMER *pTimer,
+ SK_U32 Time,SK_U32 Class,SK_U32 Event,SK_EVPARA Para);
+extern void SkTimerDone(SK_AC *pAC,SK_IOC Ioc);
+#endif /* _SKTIMER_H_ */
diff --git a/drivers/net/sk98lin/h/sktypes.h b/drivers/net/sk98lin/h/sktypes.h
new file mode 100644
index 0000000..e657016
--- /dev/null
+++ b/drivers/net/sk98lin/h/sktypes.h
@@ -0,0 +1,87 @@
+/******************************************************************************
+ *
+ * Name: sktypes.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.3 $
+ * Date: $Date: 2003/02/25 14:16:40 $
+ * Purpose: Define data types for Linux
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+ /*****************************************************************************
+ *
+ * History:
+ *
+ * $Log: sktypes.h,v $
+ * Revision 1.3 2003/02/25 14:16:40 mlindner
+ * Fix: Copyright statement
+ *
+ * Revision 1.2 1999/11/22 14:01:58 cgoos
+ * Changed license header to GPL.
+ * Now using Linux' fixed size types instead of standard types.
+ *
+ * Revision 1.1 1999/02/16 07:41:40 cgoos
+ * First version.
+ *
+ *
+ *
+ *****************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * In this file, all data types that are needed by the common modules
+ * are mapped to Linux data types.
+ *
+ *
+ * Include File Hierarchy:
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKTYPES_H
+#define __INC_SKTYPES_H
+
+
+/* defines *******************************************************************/
+
+/*
+ * Data types with a specific size. 'I' = signed, 'U' = unsigned.
+ */
+#define SK_I8 s8
+#define SK_U8 u8
+#define SK_I16 s16
+#define SK_U16 u16
+#define SK_I32 s32
+#define SK_U32 u32
+#define SK_I64 s64
+#define SK_U64 u64
+
+#define SK_UPTR ulong /* casting pointer <-> integral */
+
+/*
+* Boolean type.
+*/
+#define SK_BOOL SK_U8
+#define SK_FALSE 0
+#define SK_TRUE (!SK_FALSE)
+
+/* typedefs *******************************************************************/
+
+/* function prototypes ********************************************************/
+
+#endif /* __INC_SKTYPES_H */
diff --git a/drivers/net/sk98lin/h/skversion.h b/drivers/net/sk98lin/h/skversion.h
new file mode 100644
index 0000000..ef46685
--- /dev/null
+++ b/drivers/net/sk98lin/h/skversion.h
@@ -0,0 +1,52 @@
+/******************************************************************************
+ *
+ * Name: version.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.4 $
+ * Date: $Date: 2003/02/25 14:16:40 $
+ * Purpose: SK specific Error log support
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ * $Log: skversion.h,v $
+ * Revision 1.4 2003/02/25 14:16:40 mlindner
+ * Fix: Copyright statement
+ *
+ * Revision 1.3 2003/02/25 13:30:18 mlindner
+ * Add: Support for various vendors
+ *
+ * Revision 1.1.2.1 2001/09/05 13:38:30 mlindner
+ * Removed FILE description
+ *
+ * Revision 1.1 2001/03/06 09:25:00 mlindner
+ * first version
+ *
+ *
+ *
+ ******************************************************************************/
+
+
+static const char SysKonnectFileId[] = "@(#) (C) SysKonnect GmbH.";
+static const char SysKonnectBuildNumber[] =
+ "@(#)SK-BUILD: 6.05 PL: 01";
+
+#define BOOT_STRING "sk98lin: Network Device Driver v6.05\n" \
+ "(C)Copyright 1999-2003 Marvell(R)."
+
+#define VER_STRING "6.05"
diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h
new file mode 100644
index 0000000..1be34c5
--- /dev/null
+++ b/drivers/net/sk98lin/h/skvpd.h
@@ -0,0 +1,335 @@
+/******************************************************************************
+ *
+ * Name: skvpd.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.15 $
+ * Date: $Date: 2003/01/13 10:39:38 $
+ * Purpose: Defines and Macros for VPD handling
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skvpd.h,v $
+ * Revision 1.15 2003/01/13 10:39:38 rschmidt
+ * Replaced define for PCI device Id for YUKON with GENESIS
+ * Editorial changes
+ *
+ * Revision 1.14 2002/11/14 15:18:10 gheinig
+ * Added const specifier to key and buf parameters for VpdPara,VpdRead
+ * and VpdWrite. This is necessary for the Diag 7 GUI API
+ *
+ * Revision 1.13 2002/10/14 15:58:18 rschmidt
+ * Added entry in rom_size struct s_vpd
+ * Editorial changes
+ *
+ * Revision 1.12 2002/09/09 14:43:51 mkarl
+ * added PCI Id of Yukon for reading VPD in diag before the adapter has
+ * been initialized
+ * editorial changes
+ *
+ * Revision 1.11 2002/07/26 13:19:16 mkarl
+ * added support for Yukon
+ * added vpd_size to VPD struct
+ *
+ * Revision 1.10 2000/08/10 11:29:07 rassmann
+ * Editorial changes.
+ * Preserving 32-bit alignment in structs for the adapter context.
+ * Removed unused function VpdWriteDword() (#if 0).
+ * Made VpdReadKeyword() available for SKDIAG only.
+ *
+ * Revision 1.9 1999/11/22 14:02:27 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.8 1999/03/11 14:26:40 malthoff
+ * Replace __STDC__ with SK_KR_PROTO.
+ *
+ * Revision 1.7 1998/10/28 07:27:17 gklug
+ * rmv: SWAP macros
+ * add: VPD_IN/OUT8 macros
+ * chg: interface definition
+ *
+ * Revision 1.6 1998/10/22 10:03:44 gklug
+ * fix: use SK_OUT16 instead of SK_OUTW
+ *
+ * Revision 1.5 1998/10/14 07:05:31 cgoos
+ * Changed constants in SK_SWAP_32 to UL.
+ *
+ * Revision 1.4 1998/08/19 08:14:09 gklug
+ * fix: remove struct keyword as much as possible from the C-code (see CCC)
+ *
+ * Revision 1.3 1998/08/18 08:18:56 malthoff
+ * Modify VPD in and out macros for SK_DIAG
+ *
+ * Revision 1.2 1998/07/03 14:49:08 malthoff
+ * Add VPD_INxx() and VPD_OUTxx() macros for the Diagnostics tool.
+ *
+ * Revision 1.1 1998/06/19 14:08:03 malthoff
+ * Created.
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * skvpd.h contains Diagnostic specific defines for VPD handling
+ */
+
+#ifndef __INC_SKVPD_H_
+#define __INC_SKVPD_H_
+
+/*
+ * Define Resource Type Identifiers and VPD keywords
+ */
+#define RES_ID 0x82 /* Resource Type ID String (Product Name) */
+#define RES_VPD_R 0x90 /* start of VPD read only area */
+#define RES_VPD_W 0x91 /* start of VPD read/write area */
+#define RES_END 0x78 /* Resource Type End Tag */
+
+#ifndef VPD_NAME
+#define VPD_NAME "Name" /* Product Name, VPD name of RES_ID */
+#endif /* VPD_NAME */
+#define VPD_PN "PN" /* Adapter Part Number */
+#define VPD_EC "EC" /* Adapter Engineering Level */
+#define VPD_MN "MN" /* Manufacture ID */
+#define VPD_SN "SN" /* Serial Number */
+#define VPD_CP "CP" /* Extended Capability */
+#define VPD_RV "RV" /* Checksum and Reserved */
+#define VPD_YA "YA" /* Asset Tag Identifier */
+#define VPD_VL "VL" /* First Error Log Message (SK specific) */
+#define VPD_VF "VF" /* Second Error Log Message (SK specific) */
+#define VPD_RW "RW" /* Remaining Read / Write Area */
+
+/* 'type' values for vpd_setup_para() */
+#define VPD_RO_KEY 1 /* RO keys are "PN", "EC", "MN", "SN", "RV" */
+#define VPD_RW_KEY 2 /* RW keys are "Yx", "Vx", and "RW" */
+
+/* 'op' values for vpd_setup_para() */
+#define ADD_KEY 1 /* add the key at the pos "RV" or "RW" */
+#define OWR_KEY 2 /* overwrite key if already exists */
+
+/*
+ * Define READ and WRITE Constants.
+ */
+
+#define VPD_DEV_ID_GENESIS 0x4300
+
+#define VPD_SIZE_YUKON 256
+#define VPD_SIZE_GENESIS 512
+#define VPD_SIZE 512
+#define VPD_READ 0x0000
+#define VPD_WRITE 0x8000
+
+#define VPD_STOP(pAC,IoC) VPD_OUT16(pAC,IoC,PCI_VPD_ADR_REG,VPD_WRITE)
+
+#define VPD_GET_RES_LEN(p) ((unsigned int) \
+ (* (SK_U8 *)&(p)[1]) |\
+ ((* (SK_U8 *)&(p)[2]) << 8))
+#define VPD_GET_VPD_LEN(p) ((unsigned int)(* (SK_U8 *)&(p)[2]))
+#define VPD_GET_VAL(p) ((char *)&(p)[3])
+
+#define VPD_MAX_LEN 50
+
+/* VPD status */
+ /* bit 7..1 reserved */
+#define VPD_VALID (1<<0) /* VPD data buffer, vpd_free_ro, */
+ /* and vpd_free_rw valid */
+
+/*
+ * VPD structs
+ */
+typedef struct s_vpd_status {
+ unsigned short Align01; /* Alignment */
+ unsigned short vpd_status; /* VPD status, description see above */
+ int vpd_free_ro; /* unused bytes in read only area */
+ int vpd_free_rw; /* bytes available in read/write area */
+} SK_VPD_STATUS;
+
+typedef struct s_vpd {
+ SK_VPD_STATUS v; /* VPD status structure */
+ char vpd_buf[VPD_SIZE]; /* VPD buffer */
+ int rom_size; /* VPD ROM Size from PCI_OUR_REG_2 */
+ int vpd_size; /* saved VPD-size */
+} SK_VPD;
+
+typedef struct s_vpd_para {
+ unsigned int p_len; /* parameter length */
+ char *p_val; /* points to the value */
+} SK_VPD_PARA;
+
+/*
+ * structure of Large Resource Type Identifiers
+ */
+
+/* was removed because of alignment problems */
+
+/*
+ * structure of VPD keywords
+ */
+typedef struct s_vpd_key {
+ char p_key[2]; /* 2 bytes ID string */
+ unsigned char p_len; /* 1 byte length */
+ char p_val; /* start of the value string */
+} SK_VPD_KEY;
+
+
+/*
+ * System specific VPD macros
+ */
+#ifndef SKDIAG
+#ifndef VPD_DO_IO
+#define VPD_OUT8(pAC,IoC,Addr,Val) (void)SkPciWriteCfgByte(pAC,Addr,Val)
+#define VPD_OUT16(pAC,IoC,Addr,Val) (void)SkPciWriteCfgWord(pAC,Addr,Val)
+#define VPD_OUT32(pAC,IoC,Addr,Val) (void)SkPciWriteCfgDWord(pAC,Addr,Val)
+#define VPD_IN8(pAC,IoC,Addr,pVal) (void)SkPciReadCfgByte(pAC,Addr,pVal)
+#define VPD_IN16(pAC,IoC,Addr,pVal) (void)SkPciReadCfgWord(pAC,Addr,pVal)
+#define VPD_IN32(pAC,IoC,Addr,pVal) (void)SkPciReadCfgDWord(pAC,Addr,pVal)
+#else /* VPD_DO_IO */
+#define VPD_OUT8(pAC,IoC,Addr,Val) SK_OUT8(IoC,PCI_C(Addr),Val)
+#define VPD_OUT16(pAC,IoC,Addr,Val) SK_OUT16(IoC,PCI_C(Addr),Val)
+#define VPD_OUT32(pAC,IoC,Addr,Val) SK_OUT32(IoC,PCI_C(Addr),Val)
+#define VPD_IN8(pAC,IoC,Addr,pVal) SK_IN8(IoC,PCI_C(Addr),pVal)
+#define VPD_IN16(pAC,IoC,Addr,pVal) SK_IN16(IoC,PCI_C(Addr),pVal)
+#define VPD_IN32(pAC,IoC,Addr,pVal) SK_IN32(IoC,PCI_C(Addr),pVal)
+#endif /* VPD_DO_IO */
+#else /* SKDIAG */
+#define VPD_OUT8(pAC,Ioc,Addr,Val) { \
+ if ((pAC)->DgT.DgUseCfgCycle) \
+ SkPciWriteCfgByte(pAC,Addr,Val); \
+ else \
+ SK_OUT8(pAC,PCI_C(Addr),Val); \
+ }
+#define VPD_OUT16(pAC,Ioc,Addr,Val) { \
+ if ((pAC)->DgT.DgUseCfgCycle) \
+ SkPciWriteCfgWord(pAC,Addr,Val); \
+ else \
+ SK_OUT16(pAC,PCI_C(Addr),Val); \
+ }
+#define VPD_OUT32(pAC,Ioc,Addr,Val) { \
+ if ((pAC)->DgT.DgUseCfgCycle) \
+ SkPciWriteCfgDWord(pAC,Addr,Val); \
+ else \
+ SK_OUT32(pAC,PCI_C(Addr),Val); \
+ }
+#define VPD_IN8(pAC,Ioc,Addr,pVal) { \
+ if ((pAC)->DgT.DgUseCfgCycle) \
+ SkPciReadCfgByte(pAC,Addr,pVal); \
+ else \
+ SK_IN8(pAC,PCI_C(Addr),pVal); \
+ }
+#define VPD_IN16(pAC,Ioc,Addr,pVal) { \
+ if ((pAC)->DgT.DgUseCfgCycle) \
+ SkPciReadCfgWord(pAC,Addr,pVal); \
+ else \
+ SK_IN16(pAC,PCI_C(Addr),pVal); \
+ }
+#define VPD_IN32(pAC,Ioc,Addr,pVal) { \
+ if ((pAC)->DgT.DgUseCfgCycle) \
+ SkPciReadCfgDWord(pAC,Addr,pVal); \
+ else \
+ SK_IN32(pAC,PCI_C(Addr),pVal); \
+ }
+#endif /* nSKDIAG */
+
+/* function prototypes ********************************************************/
+
+#ifndef SK_KR_PROTO
+#ifdef SKDIAG
+extern SK_U32 VpdReadDWord(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ int addr);
+#endif /* SKDIAG */
+
+extern int VpdSetupPara(
+ SK_AC *pAC,
+ const char *key,
+ const char *buf,
+ int len,
+ int type,
+ int op);
+
+extern SK_VPD_STATUS *VpdStat(
+ SK_AC *pAC,
+ SK_IOC IoC);
+
+extern int VpdKeys(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ char *buf,
+ int *len,
+ int *elements);
+
+extern int VpdRead(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ const char *key,
+ char *buf,
+ int *len);
+
+extern SK_BOOL VpdMayWrite(
+ char *key);
+
+extern int VpdWrite(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ const char *key,
+ const char *buf);
+
+extern int VpdDelete(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ char *key);
+
+extern int VpdUpdate(
+ SK_AC *pAC,
+ SK_IOC IoC);
+
+extern void VpdErrLog(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ char *msg);
+
+#ifdef SKDIAG
+extern int VpdReadBlock(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ char *buf,
+ int addr,
+ int len);
+
+extern int VpdWriteBlock(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ char *buf,
+ int addr,
+ int len);
+#endif /* SKDIAG */
+#else /* SK_KR_PROTO */
+extern SK_U32 VpdReadDWord();
+extern int VpdSetupPara();
+extern SK_VPD_STATUS *VpdStat();
+extern int VpdKeys();
+extern int VpdRead();
+extern SK_BOOL VpdMayWrite();
+extern int VpdWrite();
+extern int VpdDelete();
+extern int VpdUpdate();
+extern void VpdErrLog();
+#endif /* SK_KR_PROTO */
+
+#endif /* __INC_SKVPD_H_ */
diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h
new file mode 100644
index 0000000..2ef903a
--- /dev/null
+++ b/drivers/net/sk98lin/h/xmac_ii.h
@@ -0,0 +1,1738 @@
+/******************************************************************************
+ *
+ * Name: xmac_ii.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.46 $
+ * Date: $Date: 2003/01/28 09:47:45 $
+ * Purpose: Defines and Macros for Gigabit Ethernet Controller
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: xmac_ii.h,v $
+ * Revision 1.46 2003/01/28 09:47:45 rschmidt
+ * Added defines for copper MDI/MDIX configuration
+ * Added defines for LED Control Register
+ * Editorial changes
+ *
+ * Revision 1.45 2002/12/10 14:35:13 rschmidt
+ * Corrected defines for Extended PHY Specific Control
+ * Added defines for Ext. PHY Specific Ctrl 2 Reg. (Fiber specific)
+ *
+ * Revision 1.44 2002/12/09 14:58:41 rschmidt
+ * Added defines for Ext. PHY Specific Ctrl Reg. (downshift feature)
+ * Added 'GMR_FS_UN_SIZE'-Bit to Rx GMAC FIFO Flush Mask
+ *
+ * Revision 1.43 2002/12/05 10:14:45 rschmidt
+ * Added define for GMAC's Half Duplex Burst Mode
+ * Added define for Rx GMAC FIFO Flush Mask (default)
+ *
+ * Revision 1.42 2002/11/12 16:48:19 rschmidt
+ * Added defines for Cable Diagnostic Register (GPHY)
+ * Editorial changes
+ *
+ * Revision 1.41 2002/10/21 11:20:22 rschmidt
+ * Added bit GMR_FS_GOOD_FC to GMR_FS_ANY_ERR
+ * Editorial changes
+ *
+ * Revision 1.40 2002/10/14 14:54:14 rschmidt
+ * Added defines for GPHY Specific Status and GPHY Interrupt Status
+ * Added bits PHY_M_IS_AN_ERROR and PHY_M_IS_FIFO_ERROR to PHY_M_DEF_MSK
+ * Editorial changes
+ *
+ * Revision 1.39 2002/10/10 15:53:44 mkarl
+ * added some bit definitions for link speed status and LED's
+ *
+ * Revision 1.38 2002/08/21 16:23:46 rschmidt
+ * Added defines for PHY Specific Ctrl Reg
+ * Editorial changes
+ *
+ * Revision 1.37 2002/08/16 14:50:33 rschmidt
+ * Added defines for Auto-Neg. Advertisement YUKON Fiber (88E1011S only)
+ * Changed define PHY_M_DEF_MSK for GPHY IRQ Mask
+ * Editorial changes
+ *
+ * Revision 1.36 2002/08/12 13:21:10 rschmidt
+ * Added defines for different Broadcom PHY Ids
+ *
+ * Revision 1.35 2002/08/08 15:58:01 rschmidt
+ * Added defines for Manual LED Override register (YUKON)
+ * Editorial changes
+ *
+ * Revision 1.34 2002/07/31 17:23:36 rwahl
+ * Added define GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR).
+ *
+ * Revision 1.33 2002/07/23 16:03:37 rschmidt
+ * Added defines for GPHY registers
+ * Editorial changes
+ *
+ * Revision 1.32 2002/07/15 18:14:37 rwahl
+ * Added GMAC MIB counters definitions.
+ * Editorial changes.
+ *
+ * Revision 1.31 2002/07/15 15:42:50 rschmidt
+ * Removed defines from PHY specific reg. which are
+ * common to all PHYs
+ * Added defines for GMAC MIB Counters
+ * Editorial changes
+ *
+ * Revision 1.30 2002/06/05 08:22:12 rschmidt
+ * Changed defines for GMAC Rx Control Register and Rx Status
+ * Editorial changes
+ *
+ * Revision 1.29 2002/04/25 11:43:56 rschmidt
+ * Added define PHY_B_AS_PAUSE_MSK for BCom Pause Res.
+ * Added new registers and defines for YUKON (GMAC, GPHY)
+ * Added Receive Frame Status Encoding for YUKON
+ * Editorial changes
+ *
+ * Revision 1.28 2000/11/09 12:32:49 rassmann
+ * Renamed variables.
+ *
+ * Revision 1.27 2000/05/17 11:00:46 malthoff
+ * Add bit for enable/disable power management in BCOM chip.
+ *
+ * Revision 1.26 1999/11/22 14:03:00 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.25 1999/08/12 19:19:38 malthoff
+ * Add PHY_B_AC_TX_TST bit according to BCOM A1 errata sheet.
+ *
+ * Revision 1.24 1999/07/30 11:27:21 cgoos
+ * Fixed a missing end-of-comment.
+ *
+ * Revision 1.23 1999/07/30 07:03:31 malthoff
+ * Cut some long comments.
+ * Correct the XMAC PHY ID definitions.
+ *
+ * Revision 1.22 1999/05/19 07:33:18 cgoos
+ * Changes for 1000Base-T.
+ *
+ * Revision 1.21 1999/03/25 07:46:11 malthoff
+ * Add XM_HW_CFG, XM_TS_READ, and XM_TS_LOAD registers.
+ *
+ * Revision 1.20 1999/03/12 13:36:09 malthoff
+ * Remove __STDC__.
+ *
+ * Revision 1.19 1998/12/10 12:22:54 gklug
+ * fix: RX_PAGE must be in interrupt mask
+ *
+ * Revision 1.18 1998/12/10 10:36:36 gklug
+ * fix: swap of pause bits
+ *
+ * Revision 1.17 1998/11/18 13:21:45 gklug
+ * fix: Default interrupt mask
+ *
+ * Revision 1.16 1998/10/29 15:53:21 gklug
+ * fix: Default mask uses ASS (GP0) signal
+ *
+ * Revision 1.15 1998/10/28 13:52:52 malthoff
+ * Add new bits in RX_CMD register.
+ *
+ * Revision 1.14 1998/10/19 15:34:53 gklug
+ * fix: typos
+ *
+ * Revision 1.13 1998/10/14 07:19:03 malthoff
+ * bug fix: Every define which describes bit 31
+ * must be declared as unsigned long 'UL'.
+ * fix bit definitions of PHY_AN_RFB and PHY_AN_PAUSE.
+ * Remove ANP defines. Rework the RFB defines.
+ *
+ * Revision 1.12 1998/10/14 06:22:44 cgoos
+ * Changed shifted constant to ULONG.
+ *
+ * Revision 1.11 1998/10/14 05:43:26 gklug
+ * add: shift pause coding
+ * fix: PAUSE bits definition
+ *
+ * Revision 1.10 1998/10/13 09:19:21 malthoff
+ * Again change XMR_FS_ANY_ERR because of new info from XaQti.
+ *
+ * Revision 1.9 1998/10/09 07:58:30 malthoff
+ * Add XMR_FS_FCS_ERR to XMR_FS_ANY_ERR.
+ *
+ * Revision 1.8 1998/10/09 07:18:17 malthoff
+ * bug fix of a bug fix: XM_PAUSE_MODE and XM_DEF_MODE
+ * are not inverted! Bug XM_DEF_MSK is inverted.
+ *
+ * Revision 1.7 1998/10/05 08:04:32 malthoff
+ * bug fix: XM_PAUSE_MODE and XM_DEF_MODE
+ * must be inverted declarations.
+ *
+ * Revision 1.6 1998/09/28 13:38:18 malthoff
+ * Add default modes and masks XM_DEF_MSK,
+ * XM_PAUSE_MODE and XM_DEF_MODE
+ *
+ * Revision 1.5 1998/09/16 14:42:04 malthoff
+ * Bug Fix: XM_GP_PORT is a 32 bit (not a 16 bit) register.
+ *
+ * Revision 1.4 1998/08/20 14:59:47 malthoff
+ * Rework this file after reading the XaQti data sheet
+ * "Differences between Rev. B2 & Rev. C XMAC II".
+ * This file is now 100% XMAC II Rev. C complained.
+ *
+ * Revision 1.3 1998/06/29 12:18:23 malthoff
+ * Correct XMR_FS_ANY_ERR definition.
+ *
+ * Revision 1.2 1998/06/29 12:10:56 malthoff
+ * Add define XMR_FS_ANY_ERR.
+ *
+ * Revision 1.1 1998/06/19 13:37:17 malthoff
+ * created.
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_XMAC_H
+#define __INC_XMAC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* defines ********************************************************************/
+
+/*
+ * XMAC II registers
+ *
+ * The XMAC registers are 16 or 32 bits wide.
+ * The XMACs host processor interface is set to 16 bit mode,
+ * therefore ALL registers will be addressed with 16 bit accesses.
+ *
+ * The following macros are provided to access the XMAC registers
+ * XM_IN16(), XM_OUT16, XM_IN32(), XM_OUT32(), XM_INADR(), XM_OUTADR(),
+ * XM_INHASH(), and XM_OUTHASH().
+ * The macros are defined in SkGeHw.h.
+ *
+ * Note: NA reg = Network Address e.g DA, SA etc.
+ *
+ */
+#define XM_MMU_CMD 0x0000 /* 16 bit r/w MMU Command Register */
+ /* 0x0004: reserved */
+#define XM_POFF 0x0008 /* 32 bit r/w Packet Offset Register */
+#define XM_BURST 0x000c /* 32 bit r/w Burst Register for half duplex*/
+#define XM_1L_VLAN_TAG 0x0010 /* 16 bit r/w One Level VLAN Tag ID */
+#define XM_2L_VLAN_TAG 0x0014 /* 16 bit r/w Two Level VLAN Tag ID */
+ /* 0x0018 - 0x001e: reserved */
+#define XM_TX_CMD 0x0020 /* 16 bit r/w Transmit Command Register */
+#define XM_TX_RT_LIM 0x0024 /* 16 bit r/w Transmit Retry Limit Register */
+#define XM_TX_STIME 0x0028 /* 16 bit r/w Transmit Slottime Register */
+#define XM_TX_IPG 0x002c /* 16 bit r/w Transmit Inter Packet Gap */
+#define XM_RX_CMD 0x0030 /* 16 bit r/w Receive Command Register */
+#define XM_PHY_ADDR 0x0034 /* 16 bit r/w PHY Address Register */
+#define XM_PHY_DATA 0x0038 /* 16 bit r/w PHY Data Register */
+ /* 0x003c: reserved */
+#define XM_GP_PORT 0x0040 /* 32 bit r/w General Purpose Port Register */
+#define XM_IMSK 0x0044 /* 16 bit r/w Interrupt Mask Register */
+#define XM_ISRC 0x0048 /* 16 bit r/o Interrupt Status Register */
+#define XM_HW_CFG 0x004c /* 16 bit r/w Hardware Config Register */
+ /* 0x0050 - 0x005e: reserved */
+#define XM_TX_LO_WM 0x0060 /* 16 bit r/w Tx FIFO Low Water Mark */
+#define XM_TX_HI_WM 0x0062 /* 16 bit r/w Tx FIFO High Water Mark */
+#define XM_TX_THR 0x0064 /* 16 bit r/w Tx Request Threshold */
+#define XM_HT_THR 0x0066 /* 16 bit r/w Host Request Threshold */
+#define XM_PAUSE_DA 0x0068 /* NA reg r/w Pause Destination Address */
+ /* 0x006e: reserved */
+#define XM_CTL_PARA 0x0070 /* 32 bit r/w Control Parameter Register */
+#define XM_MAC_OPCODE 0x0074 /* 16 bit r/w Opcode for MAC control frames */
+#define XM_MAC_PTIME 0x0076 /* 16 bit r/w Pause time for MAC ctrl frames*/
+#define XM_TX_STAT 0x0078 /* 32 bit r/o Tx Status LIFO Register */
+
+ /* 0x0080 - 0x00fc: 16 NA reg r/w Exact Match Address Registers */
+ /* use the XM_EXM() macro to address */
+#define XM_EXM_START 0x0080 /* r/w Start Address of the EXM Regs */
+
+ /*
+ * XM_EXM(Reg)
+ *
+ * returns the XMAC address offset of specified Exact Match Addr Reg
+ *
+ * para: Reg EXM register to addr (0 .. 15)
+ *
+ * usage: XM_INADDR(IoC, MAC_1, XM_EXM(i), &val[i]);
+ */
+#define XM_EXM(Reg) (XM_EXM_START + ((Reg) << 3))
+
+#define XM_SRC_CHK 0x0100 /* NA reg r/w Source Check Address Register */
+#define XM_SA 0x0108 /* NA reg r/w Station Address Register */
+#define XM_HSM 0x0110 /* 64 bit r/w Hash Match Address Registers */
+#define XM_RX_LO_WM 0x0118 /* 16 bit r/w Receive Low Water Mark */
+#define XM_RX_HI_WM 0x011a /* 16 bit r/w Receive High Water Mark */
+#define XM_RX_THR 0x011c /* 32 bit r/w Receive Request Threshold */
+#define XM_DEV_ID 0x0120 /* 32 bit r/o Device ID Register */
+#define XM_MODE 0x0124 /* 32 bit r/w Mode Register */
+#define XM_LSA 0x0128 /* NA reg r/o Last Source Register */
+ /* 0x012e: reserved */
+#define XM_TS_READ 0x0130 /* 32 bit r/o Time Stamp Read Register */
+#define XM_TS_LOAD 0x0134 /* 32 bit r/o Time Stamp Load Value */
+ /* 0x0138 - 0x01fe: reserved */
+#define XM_STAT_CMD 0x0200 /* 16 bit r/w Statistics Command Register */
+#define XM_RX_CNT_EV 0x0204 /* 32 bit r/o Rx Counter Event Register */
+#define XM_TX_CNT_EV 0x0208 /* 32 bit r/o Tx Counter Event Register */
+#define XM_RX_EV_MSK 0x020c /* 32 bit r/w Rx Counter Event Mask */
+#define XM_TX_EV_MSK 0x0210 /* 32 bit r/w Tx Counter Event Mask */
+ /* 0x0204 - 0x027e: reserved */
+#define XM_TXF_OK 0x0280 /* 32 bit r/o Frames Transmitted OK Conuter */
+#define XM_TXO_OK_HI 0x0284 /* 32 bit r/o Octets Transmitted OK High Cnt*/
+#define XM_TXO_OK_LO 0x0288 /* 32 bit r/o Octets Transmitted OK Low Cnt */
+#define XM_TXF_BC_OK 0x028c /* 32 bit r/o Broadcast Frames Xmitted OK */
+#define XM_TXF_MC_OK 0x0290 /* 32 bit r/o Multicast Frames Xmitted OK */
+#define XM_TXF_UC_OK 0x0294 /* 32 bit r/o Unicast Frames Xmitted OK */
+#define XM_TXF_LONG 0x0298 /* 32 bit r/o Tx Long Frame Counter */
+#define XM_TXE_BURST 0x029c /* 32 bit r/o Tx Burst Event Counter */
+#define XM_TXF_MPAUSE 0x02a0 /* 32 bit r/o Tx Pause MAC Ctrl Frame Cnt */
+#define XM_TXF_MCTRL 0x02a4 /* 32 bit r/o Tx MAC Ctrl Frame Counter */
+#define XM_TXF_SNG_COL 0x02a8 /* 32 bit r/o Tx Single Collision Counter */
+#define XM_TXF_MUL_COL 0x02ac /* 32 bit r/o Tx Multiple Collision Counter */
+#define XM_TXF_ABO_COL 0x02b0 /* 32 bit r/o Tx aborted due to Exces. Col. */
+#define XM_TXF_LAT_COL 0x02b4 /* 32 bit r/o Tx Late Collision Counter */
+#define XM_TXF_DEF 0x02b8 /* 32 bit r/o Tx Deferred Frame Counter */
+#define XM_TXF_EX_DEF 0x02bc /* 32 bit r/o Tx Excessive Deferall Counter */
+#define XM_TXE_FIFO_UR 0x02c0 /* 32 bit r/o Tx FIFO Underrun Event Cnt */
+#define XM_TXE_CS_ERR 0x02c4 /* 32 bit r/o Tx Carrier Sense Error Cnt */
+#define XM_TXP_UTIL 0x02c8 /* 32 bit r/o Tx Utilization in % */
+ /* 0x02cc - 0x02ce: reserved */
+#define XM_TXF_64B 0x02d0 /* 32 bit r/o 64 Byte Tx Frame Counter */
+#define XM_TXF_127B 0x02d4 /* 32 bit r/o 65-127 Byte Tx Frame Counter */
+#define XM_TXF_255B 0x02d8 /* 32 bit r/o 128-255 Byte Tx Frame Counter */
+#define XM_TXF_511B 0x02dc /* 32 bit r/o 256-511 Byte Tx Frame Counter */
+#define XM_TXF_1023B 0x02e0 /* 32 bit r/o 512-1023 Byte Tx Frame Counter*/
+#define XM_TXF_MAX_SZ 0x02e4 /* 32 bit r/o 1024-MaxSize Byte Tx Frame Cnt*/
+ /* 0x02e8 - 0x02fe: reserved */
+#define XM_RXF_OK 0x0300 /* 32 bit r/o Frames Received OK */
+#define XM_RXO_OK_HI 0x0304 /* 32 bit r/o Octets Received OK High Cnt */
+#define XM_RXO_OK_LO 0x0308 /* 32 bit r/o Octets Received OK Low Counter*/
+#define XM_RXF_BC_OK 0x030c /* 32 bit r/o Broadcast Frames Received OK */
+#define XM_RXF_MC_OK 0x0310 /* 32 bit r/o Multicast Frames Received OK */
+#define XM_RXF_UC_OK 0x0314 /* 32 bit r/o Unicast Frames Received OK */
+#define XM_RXF_MPAUSE 0x0318 /* 32 bit r/o Rx Pause MAC Ctrl Frame Cnt */
+#define XM_RXF_MCTRL 0x031c /* 32 bit r/o Rx MAC Ctrl Frame Counter */
+#define XM_RXF_INV_MP 0x0320 /* 32 bit r/o Rx invalid Pause Frame Cnt */
+#define XM_RXF_INV_MOC 0x0324 /* 32 bit r/o Rx Frames with inv. MAC Opcode*/
+#define XM_RXE_BURST 0x0328 /* 32 bit r/o Rx Burst Event Counter */
+#define XM_RXE_FMISS 0x032c /* 32 bit r/o Rx Missed Frames Event Cnt */
+#define XM_RXF_FRA_ERR 0x0330 /* 32 bit r/o Rx Framing Error Counter */
+#define XM_RXE_FIFO_OV 0x0334 /* 32 bit r/o Rx FIFO overflow Event Cnt */
+#define XM_RXF_JAB_PKT 0x0338 /* 32 bit r/o Rx Jabber Packet Frame Cnt */
+#define XM_RXE_CAR_ERR 0x033c /* 32 bit r/o Rx Carrier Event Error Cnt */
+#define XM_RXF_LEN_ERR 0x0340 /* 32 bit r/o Rx in Range Length Error */
+#define XM_RXE_SYM_ERR 0x0344 /* 32 bit r/o Rx Symbol Error Counter */
+#define XM_RXE_SHT_ERR 0x0348 /* 32 bit r/o Rx Short Event Error Cnt */
+#define XM_RXE_RUNT 0x034c /* 32 bit r/o Rx Runt Event Counter */
+#define XM_RXF_LNG_ERR 0x0350 /* 32 bit r/o Rx Frame too Long Error Cnt */
+#define XM_RXF_FCS_ERR 0x0354 /* 32 bit r/o Rx Frame Check Seq. Error Cnt */
+ /* 0x0358 - 0x035a: reserved */
+#define XM_RXF_CEX_ERR 0x035c /* 32 bit r/o Rx Carrier Ext Error Frame Cnt*/
+#define XM_RXP_UTIL 0x0360 /* 32 bit r/o Rx Utilization in % */
+ /* 0x0364 - 0x0366: reserved */
+#define XM_RXF_64B 0x0368 /* 32 bit r/o 64 Byte Rx Frame Counter */
+#define XM_RXF_127B 0x036c /* 32 bit r/o 65-127 Byte Rx Frame Counter */
+#define XM_RXF_255B 0x0370 /* 32 bit r/o 128-255 Byte Rx Frame Counter */
+#define XM_RXF_511B 0x0374 /* 32 bit r/o 256-511 Byte Rx Frame Counter */
+#define XM_RXF_1023B 0x0378 /* 32 bit r/o 512-1023 Byte Rx Frame Counter*/
+#define XM_RXF_MAX_SZ 0x037c /* 32 bit r/o 1024-MaxSize Byte Rx Frame Cnt*/
+ /* 0x02e8 - 0x02fe: reserved */
+
+
+/*----------------------------------------------------------------------------*/
+/*
+ * XMAC Bit Definitions
+ *
+ * If the bit access behaviour differs from the register access behaviour
+ * (r/w, r/o) this is documented after the bit number.
+ * The following bit access behaviours are used:
+ * (sc) self clearing
+ * (ro) read only
+ */
+
+/* XM_MMU_CMD 16 bit r/w MMU Command Register */
+ /* Bit 15..13: reserved */
+#define XM_MMU_PHY_RDY (1<<12) /* Bit 12: PHY Read Ready */
+#define XM_MMU_PHY_BUSY (1<<11) /* Bit 11: PHY Busy */
+#define XM_MMU_IGN_PF (1<<10) /* Bit 10: Ignore Pause Frame */
+#define XM_MMU_MAC_LB (1<<9) /* Bit 9: Enable MAC Loopback */
+ /* Bit 8: reserved */
+#define XM_MMU_FRC_COL (1<<7) /* Bit 7: Force Collision */
+#define XM_MMU_SIM_COL (1<<6) /* Bit 6: Simulate Collision */
+#define XM_MMU_NO_PRE (1<<5) /* Bit 5: No MDIO Preamble */
+#define XM_MMU_GMII_FD (1<<4) /* Bit 4: GMII uses Full Duplex */
+#define XM_MMU_RAT_CTRL (1<<3) /* Bit 3: Enable Rate Control */
+#define XM_MMU_GMII_LOOP (1<<2) /* Bit 2: PHY is in Loopback Mode */
+#define XM_MMU_ENA_RX (1<<1) /* Bit 1: Enable Receiver */
+#define XM_MMU_ENA_TX (1<<0) /* Bit 0: Enable Transmitter */
+
+
+/* XM_TX_CMD 16 bit r/w Transmit Command Register */
+ /* Bit 15..7: reserved */
+#define XM_TX_BK2BK (1<<6) /* Bit 6: Ignor Carrier Sense (Tx Bk2Bk)*/
+#define XM_TX_ENC_BYP (1<<5) /* Bit 5: Set Encoder in Bypass Mode */
+#define XM_TX_SAM_LINE (1<<4) /* Bit 4: (sc) Start utilization calculation */
+#define XM_TX_NO_GIG_MD (1<<3) /* Bit 3: Disable Carrier Extension */
+#define XM_TX_NO_PRE (1<<2) /* Bit 2: Disable Preamble Generation */
+#define XM_TX_NO_CRC (1<<1) /* Bit 1: Disable CRC Generation */
+#define XM_TX_AUTO_PAD (1<<0) /* Bit 0: Enable Automatic Padding */
+
+
+/* XM_TX_RT_LIM 16 bit r/w Transmit Retry Limit Register */
+ /* Bit 15..5: reserved */
+#define XM_RT_LIM_MSK 0x1f /* Bit 4..0: Tx Retry Limit */
+
+
+/* XM_TX_STIME 16 bit r/w Transmit Slottime Register */
+ /* Bit 15..7: reserved */
+#define XM_STIME_MSK 0x7f /* Bit 6..0: Tx Slottime bits */
+
+
+/* XM_TX_IPG 16 bit r/w Transmit Inter Packet Gap */
+ /* Bit 15..8: reserved */
+#define XM_IPG_MSK 0xff /* Bit 7..0: IPG value bits */
+
+
+/* XM_RX_CMD 16 bit r/w Receive Command Register */
+ /* Bit 15..9: reserved */
+#define XM_RX_LENERR_OK (1<<8) /* Bit 8 don't set Rx Err bit for */
+ /* inrange error packets */
+#define XM_RX_BIG_PK_OK (1<<7) /* Bit 7 don't set Rx Err bit for */
+ /* jumbo packets */
+#define XM_RX_IPG_CAP (1<<6) /* Bit 6 repl. type field with IPG */
+#define XM_RX_TP_MD (1<<5) /* Bit 5: Enable transparent Mode */
+#define XM_RX_STRIP_FCS (1<<4) /* Bit 4: Enable FCS Stripping */
+#define XM_RX_SELF_RX (1<<3) /* Bit 3: Enable Rx of own packets */
+#define XM_RX_SAM_LINE (1<<2) /* Bit 2: (sc) Start utilization calculation */
+#define XM_RX_STRIP_PAD (1<<1) /* Bit 1: Strip pad bytes of Rx frames */
+#define XM_RX_DIS_CEXT (1<<0) /* Bit 0: Disable carrier ext. check */
+
+
+/* XM_PHY_ADDR 16 bit r/w PHY Address Register */
+ /* Bit 15..5: reserved */
+#define XM_PHY_ADDR_SZ 0x1f /* Bit 4..0: PHY Address bits */
+
+
+/* XM_GP_PORT 32 bit r/w General Purpose Port Register */
+ /* Bit 31..7: reserved */
+#define XM_GP_ANIP (1L<<6) /* Bit 6: (ro) Auto-Neg. in progress */
+#define XM_GP_FRC_INT (1L<<5) /* Bit 5: (sc) Force Interrupt */
+ /* Bit 4: reserved */
+#define XM_GP_RES_MAC (1L<<3) /* Bit 3: (sc) Reset MAC and FIFOs */
+#define XM_GP_RES_STAT (1L<<2) /* Bit 2: (sc) Reset the statistics module */
+ /* Bit 1: reserved */
+#define XM_GP_INP_ASS (1L<<0) /* Bit 0: (ro) GP Input Pin asserted */
+
+
+/* XM_IMSK 16 bit r/w Interrupt Mask Register */
+/* XM_ISRC 16 bit r/o Interrupt Status Register */
+ /* Bit 15: reserved */
+#define XM_IS_LNK_AE (1<<14) /* Bit 14: Link Asynchronous Event */
+#define XM_IS_TX_ABORT (1<<13) /* Bit 13: Transmit Abort, late Col. etc */
+#define XM_IS_FRC_INT (1<<12) /* Bit 12: Force INT bit set in GP */
+#define XM_IS_INP_ASS (1<<11) /* Bit 11: Input Asserted, GP bit 0 set */
+#define XM_IS_LIPA_RC (1<<10) /* Bit 10: Link Partner requests config */
+#define XM_IS_RX_PAGE (1<<9) /* Bit 9: Page Received */
+#define XM_IS_TX_PAGE (1<<8) /* Bit 8: Next Page Loaded for Transmit */
+#define XM_IS_AND (1<<7) /* Bit 7: Auto-Negotiation Done */
+#define XM_IS_TSC_OV (1<<6) /* Bit 6: Time Stamp Counter Overflow */
+#define XM_IS_RXC_OV (1<<5) /* Bit 5: Rx Counter Event Overflow */
+#define XM_IS_TXC_OV (1<<4) /* Bit 4: Tx Counter Event Overflow */
+#define XM_IS_RXF_OV (1<<3) /* Bit 3: Receive FIFO Overflow */
+#define XM_IS_TXF_UR (1<<2) /* Bit 2: Transmit FIFO Underrun */
+#define XM_IS_TX_COMP (1<<1) /* Bit 1: Frame Tx Complete */
+#define XM_IS_RX_COMP (1<<0) /* Bit 0: Frame Rx Complete */
+
+#define XM_DEF_MSK (~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE |\
+ XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | XM_IS_TXF_UR))
+
+
+/* XM_HW_CFG 16 bit r/w Hardware Config Register */
+ /* Bit 15.. 4: reserved */
+#define XM_HW_GEN_EOP (1<<3) /* Bit 3: generate End of Packet pulse */
+#define XM_HW_COM4SIG (1<<2) /* Bit 2: use Comma Detect for Sig. Det.*/
+ /* Bit 1: reserved */
+#define XM_HW_GMII_MD (1<<0) /* Bit 0: GMII Interface selected */
+
+
+/* XM_TX_LO_WM 16 bit r/w Tx FIFO Low Water Mark */
+/* XM_TX_HI_WM 16 bit r/w Tx FIFO High Water Mark */
+ /* Bit 15..10 reserved */
+#define XM_TX_WM_MSK 0x01ff /* Bit 9.. 0 Tx FIFO Watermark bits */
+
+/* XM_TX_THR 16 bit r/w Tx Request Threshold */
+/* XM_HT_THR 16 bit r/w Host Request Threshold */
+/* XM_RX_THR 16 bit r/w Rx Request Threshold */
+ /* Bit 15..11 reserved */
+#define XM_THR_MSK 0x03ff /* Bit 10.. 0 Rx/Tx Request Threshold bits */
+
+
+/* XM_TX_STAT 32 bit r/o Tx Status LIFO Register */
+#define XM_ST_VALID (1UL<<31) /* Bit 31: Status Valid */
+#define XM_ST_BYTE_CNT (0x3fffL<<17) /* Bit 30..17: Tx frame Length */
+#define XM_ST_RETRY_CNT (0x1fL<<12) /* Bit 16..12: Retry Count */
+#define XM_ST_EX_COL (1L<<11) /* Bit 11: Excessive Collisions */
+#define XM_ST_EX_DEF (1L<<10) /* Bit 10: Excessive Deferral */
+#define XM_ST_BURST (1L<<9) /* Bit 9: p. xmitted in burst md*/
+#define XM_ST_DEFER (1L<<8) /* Bit 8: packet was defered */
+#define XM_ST_BC (1L<<7) /* Bit 7: Broadcast packet */
+#define XM_ST_MC (1L<<6) /* Bit 6: Multicast packet */
+#define XM_ST_UC (1L<<5) /* Bit 5: Unicast packet */
+#define XM_ST_TX_UR (1L<<4) /* Bit 4: FIFO Underrun occured */
+#define XM_ST_CS_ERR (1L<<3) /* Bit 3: Carrier Sense Error */
+#define XM_ST_LAT_COL (1L<<2) /* Bit 2: Late Collision Error */
+#define XM_ST_MUL_COL (1L<<1) /* Bit 1: Multiple Collisions */
+#define XM_ST_SGN_COL (1L<<0) /* Bit 0: Single Collision */
+
+/* XM_RX_LO_WM 16 bit r/w Receive Low Water Mark */
+/* XM_RX_HI_WM 16 bit r/w Receive High Water Mark */
+ /* Bit 15..11: reserved */
+#define XM_RX_WM_MSK 0x03ff /* Bit 11.. 0: Rx FIFO Watermark bits */
+
+
+/* XM_DEV_ID 32 bit r/o Device ID Register */
+#define XM_DEV_OUI (0x00ffffffUL<<8) /* Bit 31..8: Device OUI */
+#define XM_DEV_REV (0x07L << 5) /* Bit 7..5: Chip Rev Num */
+
+
+/* XM_MODE 32 bit r/w Mode Register */
+ /* Bit 31..27: reserved */
+#define XM_MD_ENA_REJ (1L<<26) /* Bit 26: Enable Frame Reject */
+#define XM_MD_SPOE_E (1L<<25) /* Bit 25: Send Pause on Edge */
+ /* extern generated */
+#define XM_MD_TX_REP (1L<<24) /* Bit 24: Transmit Repeater Mode */
+#define XM_MD_SPOFF_I (1L<<23) /* Bit 23: Send Pause on FIFO full */
+ /* intern generated */
+#define XM_MD_LE_STW (1L<<22) /* Bit 22: Rx Stat Word in Little Endian */
+#define XM_MD_TX_CONT (1L<<21) /* Bit 21: Send Continuous */
+#define XM_MD_TX_PAUSE (1L<<20) /* Bit 20: (sc) Send Pause Frame */
+#define XM_MD_ATS (1L<<19) /* Bit 19: Append Time Stamp */
+#define XM_MD_SPOL_I (1L<<18) /* Bit 18: Send Pause on Low */
+ /* intern generated */
+#define XM_MD_SPOH_I (1L<<17) /* Bit 17: Send Pause on High */
+ /* intern generated */
+#define XM_MD_CAP (1L<<16) /* Bit 16: Check Address Pair */
+#define XM_MD_ENA_HASH (1L<<15) /* Bit 15: Enable Hashing */
+#define XM_MD_CSA (1L<<14) /* Bit 14: Check Station Address */
+#define XM_MD_CAA (1L<<13) /* Bit 13: Check Address Array */
+#define XM_MD_RX_MCTRL (1L<<12) /* Bit 12: Rx MAC Control Frame */
+#define XM_MD_RX_RUNT (1L<<11) /* Bit 11: Rx Runt Frames */
+#define XM_MD_RX_IRLE (1L<<10) /* Bit 10: Rx in Range Len Err Frame */
+#define XM_MD_RX_LONG (1L<<9) /* Bit 9: Rx Long Frame */
+#define XM_MD_RX_CRCE (1L<<8) /* Bit 8: Rx CRC Error Frame */
+#define XM_MD_RX_ERR (1L<<7) /* Bit 7: Rx Error Frame */
+#define XM_MD_DIS_UC (1L<<6) /* Bit 6: Disable Rx Unicast */
+#define XM_MD_DIS_MC (1L<<5) /* Bit 5: Disable Rx Multicast */
+#define XM_MD_DIS_BC (1L<<4) /* Bit 4: Disable Rx Broadcast */
+#define XM_MD_ENA_PROM (1L<<3) /* Bit 3: Enable Promiscuous */
+#define XM_MD_ENA_BE (1L<<2) /* Bit 2: Enable Big Endian */
+#define XM_MD_FTF (1L<<1) /* Bit 1: (sc) Flush Tx FIFO */
+#define XM_MD_FRF (1L<<0) /* Bit 0: (sc) Flush Rx FIFO */
+
+#define XM_PAUSE_MODE (XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I)
+#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\
+ XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA)
+
+/* XM_STAT_CMD 16 bit r/w Statistics Command Register */
+ /* Bit 16..6: reserved */
+#define XM_SC_SNP_RXC (1<<5) /* Bit 5: (sc) Snap Rx Counters */
+#define XM_SC_SNP_TXC (1<<4) /* Bit 4: (sc) Snap Tx Counters */
+#define XM_SC_CP_RXC (1<<3) /* Bit 3: Copy Rx Counters Continuously */
+#define XM_SC_CP_TXC (1<<2) /* Bit 2: Copy Tx Counters Continuously */
+#define XM_SC_CLR_RXC (1<<1) /* Bit 1: (sc) Clear Rx Counters */
+#define XM_SC_CLR_TXC (1<<0) /* Bit 0: (sc) Clear Tx Counters */
+
+
+/* XM_RX_CNT_EV 32 bit r/o Rx Counter Event Register */
+/* XM_RX_EV_MSK 32 bit r/w Rx Counter Event Mask */
+#define XMR_MAX_SZ_OV (1UL<<31) /* Bit 31: 1024-MaxSize Rx Cnt Ov*/
+#define XMR_1023B_OV (1L<<30) /* Bit 30: 512-1023Byte Rx Cnt Ov*/
+#define XMR_511B_OV (1L<<29) /* Bit 29: 256-511 Byte Rx Cnt Ov*/
+#define XMR_255B_OV (1L<<28) /* Bit 28: 128-255 Byte Rx Cnt Ov*/
+#define XMR_127B_OV (1L<<27) /* Bit 27: 65-127 Byte Rx Cnt Ov */
+#define XMR_64B_OV (1L<<26) /* Bit 26: 64 Byte Rx Cnt Ov */
+#define XMR_UTIL_OV (1L<<25) /* Bit 25: Rx Util Cnt Overflow */
+#define XMR_UTIL_UR (1L<<24) /* Bit 24: Rx Util Cnt Underrun */
+#define XMR_CEX_ERR_OV (1L<<23) /* Bit 23: CEXT Err Cnt Ov */
+ /* Bit 22: reserved */
+#define XMR_FCS_ERR_OV (1L<<21) /* Bit 21: Rx FCS Error Cnt Ov */
+#define XMR_LNG_ERR_OV (1L<<20) /* Bit 20: Rx too Long Err Cnt Ov*/
+#define XMR_RUNT_OV (1L<<19) /* Bit 19: Runt Event Cnt Ov */
+#define XMR_SHT_ERR_OV (1L<<18) /* Bit 18: Rx Short Ev Err Cnt Ov*/
+#define XMR_SYM_ERR_OV (1L<<17) /* Bit 17: Rx Sym Err Cnt Ov */
+ /* Bit 16: reserved */
+#define XMR_CAR_ERR_OV (1L<<15) /* Bit 15: Rx Carr Ev Err Cnt Ov */
+#define XMR_JAB_PKT_OV (1L<<14) /* Bit 14: Rx Jabb Packet Cnt Ov */
+#define XMR_FIFO_OV (1L<<13) /* Bit 13: Rx FIFO Ov Ev Cnt Ov */
+#define XMR_FRA_ERR_OV (1L<<12) /* Bit 12: Rx Framing Err Cnt Ov */
+#define XMR_FMISS_OV (1L<<11) /* Bit 11: Rx Missed Ev Cnt Ov */
+#define XMR_BURST (1L<<10) /* Bit 10: Rx Burst Event Cnt Ov */
+#define XMR_INV_MOC (1L<<9) /* Bit 9: Rx with inv. MAC OC Ov*/
+#define XMR_INV_MP (1L<<8) /* Bit 8: Rx inv Pause Frame Ov */
+#define XMR_MCTRL_OV (1L<<7) /* Bit 7: Rx MAC Ctrl-F Cnt Ov */
+#define XMR_MPAUSE_OV (1L<<6) /* Bit 6: Rx Pause MAC Ctrl-F Ov*/
+#define XMR_UC_OK_OV (1L<<5) /* Bit 5: Rx Unicast Frame CntOv*/
+#define XMR_MC_OK_OV (1L<<4) /* Bit 4: Rx Multicast Cnt Ov */
+#define XMR_BC_OK_OV (1L<<3) /* Bit 3: Rx Broadcast Cnt Ov */
+#define XMR_OK_LO_OV (1L<<2) /* Bit 2: Octets Rx OK Low CntOv*/
+#define XMR_OK_HI_OV (1L<<1) /* Bit 1: Octets Rx OK Hi Cnt Ov*/
+#define XMR_OK_OV (1L<<0) /* Bit 0: Frames Received Ok Ov */
+
+#define XMR_DEF_MSK (XMR_OK_LO_OV | XMR_OK_HI_OV)
+
+/* XM_TX_CNT_EV 32 bit r/o Tx Counter Event Register */
+/* XM_TX_EV_MSK 32 bit r/w Tx Counter Event Mask */
+ /* Bit 31..26: reserved */
+#define XMT_MAX_SZ_OV (1L<<25) /* Bit 25: 1024-MaxSize Tx Cnt Ov*/
+#define XMT_1023B_OV (1L<<24) /* Bit 24: 512-1023Byte Tx Cnt Ov*/
+#define XMT_511B_OV (1L<<23) /* Bit 23: 256-511 Byte Tx Cnt Ov*/
+#define XMT_255B_OV (1L<<22) /* Bit 22: 128-255 Byte Tx Cnt Ov*/
+#define XMT_127B_OV (1L<<21) /* Bit 21: 65-127 Byte Tx Cnt Ov */
+#define XMT_64B_OV (1L<<20) /* Bit 20: 64 Byte Tx Cnt Ov */
+#define XMT_UTIL_OV (1L<<19) /* Bit 19: Tx Util Cnt Overflow */
+#define XMT_UTIL_UR (1L<<18) /* Bit 18: Tx Util Cnt Underrun */
+#define XMT_CS_ERR_OV (1L<<17) /* Bit 17: Tx Carr Sen Err Cnt Ov*/
+#define XMT_FIFO_UR_OV (1L<<16) /* Bit 16: Tx FIFO Ur Ev Cnt Ov */
+#define XMT_EX_DEF_OV (1L<<15) /* Bit 15: Tx Ex Deferall Cnt Ov */
+#define XMT_DEF (1L<<14) /* Bit 14: Tx Deferred Cnt Ov */
+#define XMT_LAT_COL_OV (1L<<13) /* Bit 13: Tx Late Col Cnt Ov */
+#define XMT_ABO_COL_OV (1L<<12) /* Bit 12: Tx abo dueto Ex Col Ov*/
+#define XMT_MUL_COL_OV (1L<<11) /* Bit 11: Tx Mult Col Cnt Ov */
+#define XMT_SNG_COL (1L<<10) /* Bit 10: Tx Single Col Cnt Ov */
+#define XMT_MCTRL_OV (1L<<9) /* Bit 9: Tx MAC Ctrl Counter Ov*/
+#define XMT_MPAUSE (1L<<8) /* Bit 8: Tx Pause MAC Ctrl-F Ov*/
+#define XMT_BURST (1L<<7) /* Bit 7: Tx Burst Event Cnt Ov */
+#define XMT_LONG (1L<<6) /* Bit 6: Tx Long Frame Cnt Ov */
+#define XMT_UC_OK_OV (1L<<5) /* Bit 5: Tx Unicast Cnt Ov */
+#define XMT_MC_OK_OV (1L<<4) /* Bit 4: Tx Multicast Cnt Ov */
+#define XMT_BC_OK_OV (1L<<3) /* Bit 3: Tx Broadcast Cnt Ov */
+#define XMT_OK_LO_OV (1L<<2) /* Bit 2: Octets Tx OK Low CntOv*/
+#define XMT_OK_HI_OV (1L<<1) /* Bit 1: Octets Tx OK Hi Cnt Ov*/
+#define XMT_OK_OV (1L<<0) /* Bit 0: Frames Tx Ok Ov */
+
+#define XMT_DEF_MSK (XMT_OK_LO_OV | XMT_OK_HI_OV)
+
+/*
+ * Receive Frame Status Encoding
+ */
+#define XMR_FS_LEN (0x3fffUL<<18) /* Bit 31..18: Rx Frame Length */
+#define XMR_FS_2L_VLAN (1L<<17) /* Bit 17: tagged wh 2Lev VLAN ID*/
+#define XMR_FS_1L_VLAN (1L<<16) /* Bit 16: tagged wh 1Lev VLAN ID*/
+#define XMR_FS_BC (1L<<15) /* Bit 15: Broadcast Frame */
+#define XMR_FS_MC (1L<<14) /* Bit 14: Multicast Frame */
+#define XMR_FS_UC (1L<<13) /* Bit 13: Unicast Frame */
+ /* Bit 12: reserved */
+#define XMR_FS_BURST (1L<<11) /* Bit 11: Burst Mode */
+#define XMR_FS_CEX_ERR (1L<<10) /* Bit 10: Carrier Ext. Error */
+#define XMR_FS_802_3 (1L<<9) /* Bit 9: 802.3 Frame */
+#define XMR_FS_COL_ERR (1L<<8) /* Bit 8: Collision Error */
+#define XMR_FS_CAR_ERR (1L<<7) /* Bit 7: Carrier Event Error */
+#define XMR_FS_LEN_ERR (1L<<6) /* Bit 6: In-Range Length Error */
+#define XMR_FS_FRA_ERR (1L<<5) /* Bit 5: Framing Error */
+#define XMR_FS_RUNT (1L<<4) /* Bit 4: Runt Frame */
+#define XMR_FS_LNG_ERR (1L<<3) /* Bit 3: Giant (Jumbo) Frame */
+#define XMR_FS_FCS_ERR (1L<<2) /* Bit 2: Frame Check Sequ Err */
+#define XMR_FS_ERR (1L<<1) /* Bit 1: Frame Error */
+#define XMR_FS_MCTRL (1L<<0) /* Bit 0: MAC Control Packet */
+
+/*
+ * XMR_FS_ERR will be set if
+ * XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT,
+ * XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR
+ * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue
+ * XMR_FS_ERR unless the corresponding bit in the Receive Command
+ * Register is set.
+ */
+#define XMR_FS_ANY_ERR XMR_FS_ERR
+
+/*----------------------------------------------------------------------------*/
+/*
+ * XMAC-PHY Registers, indirect addressed over the XMAC
+ */
+#define PHY_XMAC_CTRL 0x00 /* 16 bit r/w PHY Control Register */
+#define PHY_XMAC_STAT 0x01 /* 16 bit r/w PHY Status Register */
+#define PHY_XMAC_ID0 0x02 /* 16 bit r/o PHY ID0 Register */
+#define PHY_XMAC_ID1 0x03 /* 16 bit r/o PHY ID1 Register */
+#define PHY_XMAC_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */
+#define PHY_XMAC_AUNE_LP 0x05 /* 16 bit r/o Link Partner Abi Reg */
+#define PHY_XMAC_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */
+#define PHY_XMAC_NEPG 0x07 /* 16 bit r/w Next Page Register */
+#define PHY_XMAC_NEPG_LP 0x08 /* 16 bit r/o Next Page Link P Reg */
+ /* 0x09 - 0x0e: reserved */
+#define PHY_XMAC_EXT_STAT 0x0f /* 16 bit r/o Ext Status Register */
+#define PHY_XMAC_RES_ABI 0x10 /* 16 bit r/o PHY Resolved Ability */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Broadcom-PHY Registers, indirect addressed over XMAC
+ */
+#define PHY_BCOM_CTRL 0x00 /* 16 bit r/w PHY Control Register */
+#define PHY_BCOM_STAT 0x01 /* 16 bit r/o PHY Status Register */
+#define PHY_BCOM_ID0 0x02 /* 16 bit r/o PHY ID0 Register */
+#define PHY_BCOM_ID1 0x03 /* 16 bit r/o PHY ID1 Register */
+#define PHY_BCOM_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */
+#define PHY_BCOM_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */
+#define PHY_BCOM_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */
+#define PHY_BCOM_NEPG 0x07 /* 16 bit r/w Next Page Register */
+#define PHY_BCOM_NEPG_LP 0x08 /* 16 bit r/o Next Page Link P Reg */
+ /* Broadcom-specific registers */
+#define PHY_BCOM_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Ctrl Reg */
+#define PHY_BCOM_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */
+ /* 0x0b - 0x0e: reserved */
+#define PHY_BCOM_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */
+#define PHY_BCOM_P_EXT_CTRL 0x10 /* 16 bit r/w PHY Extended Ctrl Reg */
+#define PHY_BCOM_P_EXT_STAT 0x11 /* 16 bit r/o PHY Extended Stat Reg */
+#define PHY_BCOM_RE_CTR 0x12 /* 16 bit r/w Receive Error Counter */
+#define PHY_BCOM_FC_CTR 0x13 /* 16 bit r/w False Carr Sense Cnt */
+#define PHY_BCOM_RNO_CTR 0x14 /* 16 bit r/w Receiver NOT_OK Cnt */
+ /* 0x15 - 0x17: reserved */
+#define PHY_BCOM_AUX_CTRL 0x18 /* 16 bit r/w Auxiliary Control Reg */
+#define PHY_BCOM_AUX_STAT 0x19 /* 16 bit r/o Auxiliary Stat Summary */
+#define PHY_BCOM_INT_STAT 0x1a /* 16 bit r/o Interrupt Status Reg */
+#define PHY_BCOM_INT_MASK 0x1b /* 16 bit r/w Interrupt Mask Reg */
+ /* 0x1c: reserved */
+ /* 0x1d - 0x1f: test registers */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Marvel-PHY Registers, indirect addressed over GMAC
+ */
+#define PHY_MARV_CTRL 0x00 /* 16 bit r/w PHY Control Register */
+#define PHY_MARV_STAT 0x01 /* 16 bit r/o PHY Status Register */
+#define PHY_MARV_ID0 0x02 /* 16 bit r/o PHY ID0 Register */
+#define PHY_MARV_ID1 0x03 /* 16 bit r/o PHY ID1 Register */
+#define PHY_MARV_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */
+#define PHY_MARV_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */
+#define PHY_MARV_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */
+#define PHY_MARV_NEPG 0x07 /* 16 bit r/w Next Page Register */
+#define PHY_MARV_NEPG_LP 0x08 /* 16 bit r/o Next Page Link P Reg */
+ /* Marvel-specific registers */
+#define PHY_MARV_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Ctrl Reg */
+#define PHY_MARV_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */
+ /* 0x0b - 0x0e: reserved */
+#define PHY_MARV_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */
+#define PHY_MARV_PHY_CTRL 0x10 /* 16 bit r/w PHY Specific Ctrl Reg */
+#define PHY_MARV_PHY_STAT 0x11 /* 16 bit r/o PHY Specific Stat Reg */
+#define PHY_MARV_INT_MASK 0x12 /* 16 bit r/w Interrupt Mask Reg */
+#define PHY_MARV_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */
+#define PHY_MARV_EXT_CTRL 0x14 /* 16 bit r/w Ext. PHY Specific Ctrl */
+#define PHY_MARV_RXE_CNT 0x15 /* 16 bit r/w Receive Error Counter */
+#define PHY_MARV_EXT_ADR 0x16 /* 16 bit r/w Ext. Ad. for Cable Diag. */
+ /* 0x17: reserved */
+#define PHY_MARV_LED_CTRL 0x18 /* 16 bit r/w LED Control Reg */
+#define PHY_MARV_LED_OVER 0x19 /* 16 bit r/w Manual LED Override Reg */
+#define PHY_MARV_EXT_CTRL_2 0x1a /* 16 bit r/w Ext. PHY Specific Ctrl 2 */
+#define PHY_MARV_EXT_P_STAT 0x1b /* 16 bit r/w Ext. PHY Spec. Stat Reg */
+#define PHY_MARV_CABLE_DIAG 0x1c /* 16 bit r/o Cable Diagnostic Reg */
+ /* 0x1d - 0x1f: reserved */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Level One-PHY Registers, indirect addressed over XMAC
+ */
+#define PHY_LONE_CTRL 0x00 /* 16 bit r/w PHY Control Register */
+#define PHY_LONE_STAT 0x01 /* 16 bit r/o PHY Status Register */
+#define PHY_LONE_ID0 0x02 /* 16 bit r/o PHY ID0 Register */
+#define PHY_LONE_ID1 0x03 /* 16 bit r/o PHY ID1 Register */
+#define PHY_LONE_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */
+#define PHY_LONE_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */
+#define PHY_LONE_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */
+#define PHY_LONE_NEPG 0x07 /* 16 bit r/w Next Page Register */
+#define PHY_LONE_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner*/
+ /* Level One-specific registers */
+#define PHY_LONE_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg*/
+#define PHY_LONE_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */
+ /* 0x0b -0x0e: reserved */
+#define PHY_LONE_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */
+#define PHY_LONE_PORT_CFG 0x10 /* 16 bit r/w Port Configuration Reg*/
+#define PHY_LONE_Q_STAT 0x11 /* 16 bit r/o Quick Status Reg */
+#define PHY_LONE_INT_ENAB 0x12 /* 16 bit r/w Interrupt Enable Reg */
+#define PHY_LONE_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */
+#define PHY_LONE_LED_CFG 0x14 /* 16 bit r/w LED Configuration Reg */
+#define PHY_LONE_PORT_CTRL 0x15 /* 16 bit r/w Port Control Reg */
+#define PHY_LONE_CIM 0x16 /* 16 bit r/o CIM Reg */
+ /* 0x17 -0x1c: reserved */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * National-PHY Registers, indirect addressed over XMAC
+ */
+#define PHY_NAT_CTRL 0x00 /* 16 bit r/w PHY Control Register */
+#define PHY_NAT_STAT 0x01 /* 16 bit r/w PHY Status Register */
+#define PHY_NAT_ID0 0x02 /* 16 bit r/o PHY ID0 Register */
+#define PHY_NAT_ID1 0x03 /* 16 bit r/o PHY ID1 Register */
+#define PHY_NAT_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */
+#define PHY_NAT_AUNE_LP 0x05 /* 16 bit r/o Link Partner Ability Reg */
+#define PHY_NAT_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */
+#define PHY_NAT_NEPG 0x07 /* 16 bit r/w Next Page Register */
+#define PHY_NAT_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner Reg */
+ /* National-specific registers */
+#define PHY_NAT_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg */
+#define PHY_NAT_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */
+ /* 0x0b -0x0e: reserved */
+#define PHY_NAT_EXT_STAT 0x0f /* 16 bit r/o Extended Status Register */
+#define PHY_NAT_EXT_CTRL1 0x10 /* 16 bit r/o Extended Control Reg1 */
+#define PHY_NAT_Q_STAT1 0x11 /* 16 bit r/o Quick Status Reg1 */
+#define PHY_NAT_10B_OP 0x12 /* 16 bit r/o 10Base-T Operations Reg */
+#define PHY_NAT_EXT_CTRL2 0x13 /* 16 bit r/o Extended Control Reg1 */
+#define PHY_NAT_Q_STAT2 0x14 /* 16 bit r/o Quick Status Reg2 */
+ /* 0x15 -0x18: reserved */
+#define PHY_NAT_PHY_ADDR 0x19 /* 16 bit r/o PHY Address Register */
+
+
+/*----------------------------------------------------------------------------*/
+
+/*
+ * PHY bit definitions
+ * Bits defined as PHY_X_..., PHY_B_..., PHY_L_... or PHY_N_... are
+ * Xmac/Broadcom/LevelOne/National-specific.
+ * All other are general.
+ */
+
+/***** PHY_XMAC_CTRL 16 bit r/w PHY Control Register *****/
+/***** PHY_BCOM_CTRL 16 bit r/w PHY Control Register *****/
+/***** PHY_LONE_CTRL 16 bit r/w PHY Control Register *****/
+#define PHY_CT_RESET (1<<15) /* Bit 15: (sc) clear all PHY related regs */
+#define PHY_CT_LOOP (1<<14) /* Bit 14: enable Loopback over PHY */
+#define PHY_CT_SPS_LSB (1<<13) /* Bit 13: (BC,L1) Speed select, lower bit */
+#define PHY_CT_ANE (1<<12) /* Bit 12: Auto-Negotiation Enabled */
+#define PHY_CT_PDOWN (1<<11) /* Bit 11: (BC,L1) Power Down Mode */
+#define PHY_CT_ISOL (1<<10) /* Bit 10: (BC,L1) Isolate Mode */
+#define PHY_CT_RE_CFG (1<<9) /* Bit 9: (sc) Restart Auto-Negotiation */
+#define PHY_CT_DUP_MD (1<<8) /* Bit 8: Duplex Mode */
+#define PHY_CT_COL_TST (1<<7) /* Bit 7: (BC,L1) Collision Test enabled */
+#define PHY_CT_SPS_MSB (1<<6) /* Bit 6: (BC,L1) Speed select, upper bit */
+ /* Bit 5..0: reserved */
+
+#define PHY_CT_SP1000 PHY_CT_SPS_MSB /* enable speed of 1000 Mbps */
+#define PHY_CT_SP100 PHY_CT_SPS_LSB /* enable speed of 100 Mbps */
+#define PHY_CT_SP10 (0) /* enable speed of 10 Mbps */
+
+
+/***** PHY_XMAC_STAT 16 bit r/w PHY Status Register *****/
+/***** PHY_BCOM_STAT 16 bit r/w PHY Status Register *****/
+/***** PHY_MARV_STAT 16 bit r/w PHY Status Register *****/
+/***** PHY_LONE_STAT 16 bit r/w PHY Status Register *****/
+ /* Bit 15..9: reserved */
+ /* (BC/L1) 100/10 Mbps cap bits ignored*/
+#define PHY_ST_EXT_ST (1<<8) /* Bit 8: Extended Status Present */
+ /* Bit 7: reserved */
+#define PHY_ST_PRE_SUP (1<<6) /* Bit 6: (BC/L1) preamble suppression */
+#define PHY_ST_AN_OVER (1<<5) /* Bit 5: Auto-Negotiation Over */
+#define PHY_ST_REM_FLT (1<<4) /* Bit 4: Remote Fault Condition Occured */
+#define PHY_ST_AN_CAP (1<<3) /* Bit 3: Auto-Negotiation Capability */
+#define PHY_ST_LSYNC (1<<2) /* Bit 2: Link Synchronized */
+#define PHY_ST_JAB_DET (1<<1) /* Bit 1: (BC/L1) Jabber Detected */
+#define PHY_ST_EXT_REG (1<<0) /* Bit 0: Extended Register available */
+
+
+/***** PHY_XMAC_ID1 16 bit r/o PHY ID1 Register */
+/***** PHY_BCOM_ID1 16 bit r/o PHY ID1 Register */
+/***** PHY_MARV_ID1 16 bit r/o PHY ID1 Register */
+/***** PHY_LONE_ID1 16 bit r/o PHY ID1 Register */
+#define PHY_I1_OUI_MSK (0x3f<<10) /* Bit 15..10: Organization Unique ID */
+#define PHY_I1_MOD_NUM (0x3f<<4) /* Bit 9.. 4: Model Number */
+#define PHY_I1_REV_MSK 0x0f /* Bit 3.. 0: Revision Number */
+
+/* different Broadcom PHY Ids */
+#define PHY_BCOM_ID1_A1 0x6041
+#define PHY_BCOM_ID1_B2 0x6043
+#define PHY_BCOM_ID1_C0 0x6044
+#define PHY_BCOM_ID1_C5 0x6047
+
+
+/***** PHY_XMAC_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
+/***** PHY_XMAC_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/
+#define PHY_AN_NXT_PG (1<<15) /* Bit 15: Request Next Page */
+#define PHY_X_AN_ACK (1<<14) /* Bit 14: (ro) Acknowledge Received */
+#define PHY_X_AN_RFB (3<<12) /* Bit 13..12: Remote Fault Bits */
+ /* Bit 11.. 9: reserved */
+#define PHY_X_AN_PAUSE (3<<7) /* Bit 8.. 7: Pause Bits */
+#define PHY_X_AN_HD (1<<6) /* Bit 6: Half Duplex */
+#define PHY_X_AN_FD (1<<5) /* Bit 5: Full Duplex */
+ /* Bit 4.. 0: reserved */
+
+/***** PHY_BCOM_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
+/***** PHY_BCOM_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/
+/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */
+ /* Bit 14: reserved */
+#define PHY_B_AN_RF (1<<13) /* Bit 13: Remote Fault */
+ /* Bit 12: reserved */
+#define PHY_B_AN_ASP (1<<11) /* Bit 11: Asymmetric Pause */
+#define PHY_B_AN_PC (1<<10) /* Bit 10: Pause Capable */
+ /* Bit 9..5: 100/10 BT cap bits ingnored */
+#define PHY_B_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/
+
+/***** PHY_LONE_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
+/***** PHY_LONE_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/
+/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */
+ /* Bit 14: reserved */
+#define PHY_L_AN_RF (1<<13) /* Bit 13: Remote Fault */
+ /* Bit 12: reserved */
+#define PHY_L_AN_ASP (1<<11) /* Bit 11: Asymmetric Pause */
+#define PHY_L_AN_PC (1<<10) /* Bit 10: Pause Capable */
+ /* Bit 9..5: 100/10 BT cap bits ingnored */
+#define PHY_L_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/
+
+/***** PHY_NAT_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
+/***** PHY_NAT_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/
+/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */
+ /* Bit 14: reserved */
+#define PHY_N_AN_RF (1<<13) /* Bit 13: Remote Fault */
+ /* Bit 12: reserved */
+#define PHY_N_AN_100F (1<<11) /* Bit 11: 100Base-T2 FD Support */
+#define PHY_N_AN_100H (1<<10) /* Bit 10: 100Base-T2 HD Support */
+ /* Bit 9..5: 100/10 BT cap bits ingnored */
+#define PHY_N_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/
+
+/* field type definition for PHY_x_AN_SEL */
+#define PHY_SEL_TYPE 0x01 /* 00001 = Ethernet */
+
+/***** PHY_XMAC_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/
+ /* Bit 15..4: reserved */
+#define PHY_AN_LP_NP (1<<3) /* Bit 3: Link Partner can Next Page */
+#define PHY_AN_LOC_NP (1<<2) /* Bit 2: Local PHY can Next Page */
+#define PHY_AN_RX_PG (1<<1) /* Bit 1: Page Received */
+ /* Bit 0: reserved */
+
+/***** PHY_BCOM_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/
+ /* Bit 15..5: reserved */
+#define PHY_B_AN_PDF (1<<4) /* Bit 4: Parallel Detection Fault */
+/* PHY_AN_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */
+/* PHY_AN_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */
+/* PHY_AN_RX_PG (see XMAC) Bit 1: Page Received */
+#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */
+
+/***** PHY_LONE_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/
+#define PHY_L_AN_BP (1<<5) /* Bit 5: Base Page Indication */
+#define PHY_L_AN_PDF (1<<4) /* Bit 4: Parallel Detection Fault */
+/* PHY_AN_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */
+/* PHY_AN_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */
+/* PHY_AN_RX_PG (see XMAC) Bit 1: Page Received */
+#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */
+
+
+/***** PHY_XMAC_NEPG 16 bit r/w Next Page Register *****/
+/***** PHY_BCOM_NEPG 16 bit r/w Next Page Register *****/
+/***** PHY_LONE_NEPG 16 bit r/w Next Page Register *****/
+/***** PHY_XMAC_NEPG_LP 16 bit r/o Next Page Link Partner *****/
+/***** PHY_BCOM_NEPG_LP 16 bit r/o Next Page Link Partner *****/
+/***** PHY_LONE_NEPG_LP 16 bit r/o Next Page Link Partner *****/
+#define PHY_NP_MORE (1<<15) /* Bit 15: More, Next Pages to follow */
+#define PHY_NP_ACK1 (1<<14) /* Bit 14: (ro) Ack 1, for receiving a message*/
+#define PHY_NP_MSG_VAL (1<<13) /* Bit 13: Message Page valid */
+#define PHY_NP_ACK2 (1<<12) /* Bit 12: Ack 2, comply with msg content*/
+#define PHY_NP_TOG (1<<11) /* Bit 11: Toggle Bit, ensure sync */
+#define PHY_NP_MSG 0x07ff /* Bit 10..0: Message from/to Link Partner */
+
+/*
+ * XMAC-Specific
+ */
+/***** PHY_XMAC_EXT_STAT 16 bit r/w Extended Status Register *****/
+#define PHY_X_EX_FD (1<<15) /* Bit 15: Device Supports Full Duplex */
+#define PHY_X_EX_HD (1<<14) /* Bit 14: Device Supports Half Duplex */
+ /* Bit 13..0: reserved */
+
+/***** PHY_XMAC_RES_ABI 16 bit r/o PHY Resolved Ability *****/
+ /* Bit 15..9: reserved */
+#define PHY_X_RS_PAUSE (3<<7) /* Bit 8..7: selected Pause Mode */
+#define PHY_X_RS_HD (1<<6) /* Bit 6: Half Duplex Mode selected */
+#define PHY_X_RS_FD (1<<5) /* Bit 5: Full Duplex Mode selected */
+#define PHY_X_RS_ABLMIS (1<<4) /* Bit 4: duplex or pause cap mismatch */
+#define PHY_X_RS_PAUMIS (1<<3) /* Bit 3: pause capability missmatch */
+ /* Bit 2..0: reserved */
+/*
+ * Remote Fault Bits (PHY_X_AN_RFB) encoding
+ */
+#define X_RFB_OK (0<<12) /* Bit 13..12 No errors, Link OK */
+#define X_RFB_LF (1<<12) /* Bit 13..12 Link Failure */
+#define X_RFB_OFF (2<<12) /* Bit 13..12 Offline */
+#define X_RFB_AN_ERR (3<<12) /* Bit 13..12 Auto-Negotiation Error */
+
+/*
+ * Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding
+ */
+#define PHY_X_P_NO_PAUSE (0<<7) /* Bit 8..7: no Pause Mode */
+#define PHY_X_P_SYM_MD (1<<7) /* Bit 8..7: symmetric Pause Mode */
+#define PHY_X_P_ASYM_MD (2<<7) /* Bit 8..7: asymmetric Pause Mode */
+#define PHY_X_P_BOTH_MD (3<<7) /* Bit 8..7: both Pause Mode */
+
+
+/*
+ * Broadcom-Specific
+ */
+/***** PHY_BCOM_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
+#define PHY_B_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */
+#define PHY_B_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */
+#define PHY_B_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */
+#define PHY_B_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */
+#define PHY_B_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */
+#define PHY_B_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */
+ /* Bit 7..0: reserved */
+
+/***** PHY_BCOM_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
+#define PHY_B_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */
+#define PHY_B_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */
+#define PHY_B_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */
+#define PHY_B_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */
+#define PHY_B_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */
+#define PHY_B_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */
+ /* Bit 9..8: reserved */
+#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */
+
+/***** PHY_BCOM_EXT_STAT 16 bit r/o Extended Status Register *****/
+#define PHY_B_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */
+#define PHY_B_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */
+#define PHY_B_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */
+#define PHY_B_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */
+ /* Bit 11..0: reserved */
+
+/***** PHY_BCOM_P_EXT_CTRL 16 bit r/w PHY Extended Control Reg *****/
+#define PHY_B_PEC_MAC_PHY (1<<15) /* Bit 15: 10BIT/GMI-Interface */
+#define PHY_B_PEC_DIS_CROSS (1<<14) /* Bit 14: Disable MDI Crossover */
+#define PHY_B_PEC_TX_DIS (1<<13) /* Bit 13: Tx output Disabled */
+#define PHY_B_PEC_INT_DIS (1<<12) /* Bit 12: Interrupts Disabled */
+#define PHY_B_PEC_F_INT (1<<11) /* Bit 11: Force Interrupt */
+#define PHY_B_PEC_BY_45 (1<<10) /* Bit 10: Bypass 4B5B-Decoder */
+#define PHY_B_PEC_BY_SCR (1<<9) /* Bit 9: Bypass Scrambler */
+#define PHY_B_PEC_BY_MLT3 (1<<8) /* Bit 8: Bypass MLT3 Encoder */
+#define PHY_B_PEC_BY_RXA (1<<7) /* Bit 7: Bypass Rx Alignm. */
+#define PHY_B_PEC_RES_SCR (1<<6) /* Bit 6: Reset Scrambler */
+#define PHY_B_PEC_EN_LTR (1<<5) /* Bit 5: Ena LED Traffic Mode */
+#define PHY_B_PEC_LED_ON (1<<4) /* Bit 4: Force LED's on */
+#define PHY_B_PEC_LED_OFF (1<<3) /* Bit 3: Force LED's off */
+#define PHY_B_PEC_EX_IPG (1<<2) /* Bit 2: Extend Tx IPG Mode */
+#define PHY_B_PEC_3_LED (1<<1) /* Bit 1: Three Link LED mode */
+#define PHY_B_PEC_HIGH_LA (1<<0) /* Bit 0: GMII FIFO Elasticy */
+
+/***** PHY_BCOM_P_EXT_STAT 16 bit r/o PHY Extended Status Reg *****/
+ /* Bit 15..14: reserved */
+#define PHY_B_PES_CROSS_STAT (1<<13) /* Bit 13: MDI Crossover Status */
+#define PHY_B_PES_INT_STAT (1<<12) /* Bit 12: Interrupt Status */
+#define PHY_B_PES_RRS (1<<11) /* Bit 11: Remote Receiver Stat. */
+#define PHY_B_PES_LRS (1<<10) /* Bit 10: Local Receiver Stat. */
+#define PHY_B_PES_LOCKED (1<<9) /* Bit 9: Locked */
+#define PHY_B_PES_LS (1<<8) /* Bit 8: Link Status */
+#define PHY_B_PES_RF (1<<7) /* Bit 7: Remote Fault */
+#define PHY_B_PES_CE_ER (1<<6) /* Bit 6: Carrier Ext Error */
+#define PHY_B_PES_BAD_SSD (1<<5) /* Bit 5: Bad SSD */
+#define PHY_B_PES_BAD_ESD (1<<4) /* Bit 4: Bad ESD */
+#define PHY_B_PES_RX_ER (1<<3) /* Bit 3: Receive Error */
+#define PHY_B_PES_TX_ER (1<<2) /* Bit 2: Transmit Error */
+#define PHY_B_PES_LOCK_ER (1<<1) /* Bit 1: Lock Error */
+#define PHY_B_PES_MLT3_ER (1<<0) /* Bit 0: MLT3 code Error */
+
+/***** PHY_BCOM_FC_CTR 16 bit r/w False Carrier Counter *****/
+ /* Bit 15..8: reserved */
+#define PHY_B_FC_CTR 0xff /* Bit 7..0: False Carrier Counter */
+
+/***** PHY_BCOM_RNO_CTR 16 bit r/w Receive NOT_OK Counter *****/
+#define PHY_B_RC_LOC_MSK 0xff00 /* Bit 15..8: Local Rx NOT_OK cnt */
+#define PHY_B_RC_REM_MSK 0x00ff /* Bit 7..0: Remote Rx NOT_OK cnt */
+
+/***** PHY_BCOM_AUX_CTRL 16 bit r/w Auxiliary Control Reg *****/
+#define PHY_B_AC_L_SQE (1<<15) /* Bit 15: Low Squelch */
+#define PHY_B_AC_LONG_PACK (1<<14) /* Bit 14: Rx Long Packets */
+#define PHY_B_AC_ER_CTRL (3<<12) /* Bit 13..12: Edgerate Control */
+ /* Bit 11: reserved */
+#define PHY_B_AC_TX_TST (1<<10) /* Bit 10: Tx test bit, always 1 */
+ /* Bit 9.. 8: reserved */
+#define PHY_B_AC_DIS_PRF (1<<7) /* Bit 7: dis part resp filter */
+ /* Bit 6: reserved */
+#define PHY_B_AC_DIS_PM (1<<5) /* Bit 5: dis power management */
+ /* Bit 4: reserved */
+#define PHY_B_AC_DIAG (1<<3) /* Bit 3: Diagnostic Mode */
+ /* Bit 2.. 0: reserved */
+
+/***** PHY_BCOM_AUX_STAT 16 bit r/o Auxiliary Status Reg *****/
+#define PHY_B_AS_AN_C (1<<15) /* Bit 15: AutoNeg complete */
+#define PHY_B_AS_AN_CA (1<<14) /* Bit 14: AN Complete Ack */
+#define PHY_B_AS_ANACK_D (1<<13) /* Bit 13: AN Ack Detect */
+#define PHY_B_AS_ANAB_D (1<<12) /* Bit 12: AN Ability Detect */
+#define PHY_B_AS_NPW (1<<11) /* Bit 11: AN Next Page Wait */
+#define PHY_B_AS_AN_RES_MSK (7<<8) /* Bit 10..8: AN HDC */
+#define PHY_B_AS_PDF (1<<7) /* Bit 7: Parallel Detect. Fault */
+#define PHY_B_AS_RF (1<<6) /* Bit 6: Remote Fault */
+#define PHY_B_AS_ANP_R (1<<5) /* Bit 5: AN Page Received */
+#define PHY_B_AS_LP_ANAB (1<<4) /* Bit 4: LP AN Ability */
+#define PHY_B_AS_LP_NPAB (1<<3) /* Bit 3: LP Next Page Ability */
+#define PHY_B_AS_LS (1<<2) /* Bit 2: Link Status */
+#define PHY_B_AS_PRR (1<<1) /* Bit 1: Pause Resolution-Rx */
+#define PHY_B_AS_PRT (1<<0) /* Bit 0: Pause Resolution-Tx */
+
+#define PHY_B_AS_PAUSE_MSK (PHY_B_AS_PRR | PHY_B_AS_PRT)
+
+/***** PHY_BCOM_INT_STAT 16 bit r/o Interrupt Status Reg *****/
+/***** PHY_BCOM_INT_MASK 16 bit r/w Interrupt Mask Reg *****/
+ /* Bit 15: reserved */
+#define PHY_B_IS_PSE (1<<14) /* Bit 14: Pair Swap Error */
+#define PHY_B_IS_MDXI_SC (1<<13) /* Bit 13: MDIX Status Change */
+#define PHY_B_IS_HCT (1<<12) /* Bit 12: counter above 32k */
+#define PHY_B_IS_LCT (1<<11) /* Bit 11: counter above 128 */
+#define PHY_B_IS_AN_PR (1<<10) /* Bit 10: Page Received */
+#define PHY_B_IS_NO_HDCL (1<<9) /* Bit 9: No HCD Link */
+#define PHY_B_IS_NO_HDC (1<<8) /* Bit 8: No HCD */
+#define PHY_B_IS_NEG_USHDC (1<<7) /* Bit 7: Negotiated Unsup. HCD */
+#define PHY_B_IS_SCR_S_ER (1<<6) /* Bit 6: Scrambler Sync Error */
+#define PHY_B_IS_RRS_CHANGE (1<<5) /* Bit 5: Remote Rx Stat Change */
+#define PHY_B_IS_LRS_CHANGE (1<<4) /* Bit 4: Local Rx Stat Change */
+#define PHY_B_IS_DUP_CHANGE (1<<3) /* Bit 3: Duplex Mode Change */
+#define PHY_B_IS_LSP_CHANGE (1<<2) /* Bit 2: Link Speed Change */
+#define PHY_B_IS_LST_CHANGE (1<<1) /* Bit 1: Link Status Changed */
+#define PHY_B_IS_CRC_ER (1<<0) /* Bit 0: CRC Error */
+
+#define PHY_B_DEF_MSK (~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE))
+
+/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */
+#define PHY_B_P_NO_PAUSE (0<<10) /* Bit 11..10: no Pause Mode */
+#define PHY_B_P_SYM_MD (1<<10) /* Bit 11..10: symmetric Pause Mode */
+#define PHY_B_P_ASYM_MD (2<<10) /* Bit 11..10: asymmetric Pause Mode */
+#define PHY_B_P_BOTH_MD (3<<10) /* Bit 11..10: both Pause Mode */
+
+/*
+ * Resolved Duplex mode and Capabilities (Aux Status Summary Reg)
+ */
+#define PHY_B_RES_1000FD (7<<8) /* Bit 10..8: 1000Base-T Full Dup. */
+#define PHY_B_RES_1000HD (6<<8) /* Bit 10..8: 1000Base-T Half Dup. */
+/* others: 100/10: invalid for us */
+
+/*
+ * Level One-Specific
+ */
+/***** PHY_LONE_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
+#define PHY_L_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */
+#define PHY_L_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */
+#define PHY_L_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */
+#define PHY_L_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */
+#define PHY_L_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */
+#define PHY_L_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */
+ /* Bit 7..0: reserved */
+
+/***** PHY_LONE_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
+#define PHY_L_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */
+#define PHY_L_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */
+#define PHY_L_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */
+#define PHY_L_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status*/
+#define PHY_L_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */
+#define PHY_L_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */
+ /* Bit 9..8: reserved */
+#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */
+
+/***** PHY_LONE_EXT_STAT 16 bit r/o Extended Status Register *****/
+#define PHY_L_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */
+#define PHY_L_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */
+#define PHY_L_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */
+#define PHY_L_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */
+ /* Bit 11..0: reserved */
+
+/***** PHY_LONE_PORT_CFG 16 bit r/w Port Configuration Reg *****/
+#define PHY_L_PC_REP_MODE (1<<15) /* Bit 15: Repeater Mode */
+ /* Bit 14: reserved */
+#define PHY_L_PC_TX_DIS (1<<13) /* Bit 13: Tx output Disabled */
+#define PHY_L_PC_BY_SCR (1<<12) /* Bit 12: Bypass Scrambler */
+#define PHY_L_PC_BY_45 (1<<11) /* Bit 11: Bypass 4B5B-Decoder */
+#define PHY_L_PC_JAB_DIS (1<<10) /* Bit 10: Jabber Disabled */
+#define PHY_L_PC_SQE (1<<9) /* Bit 9: Enable Heartbeat */
+#define PHY_L_PC_TP_LOOP (1<<8) /* Bit 8: TP Loopback */
+#define PHY_L_PC_SSS (1<<7) /* Bit 7: Smart Speed Selection */
+#define PHY_L_PC_FIFO_SIZE (1<<6) /* Bit 6: FIFO Size */
+#define PHY_L_PC_PRE_EN (1<<5) /* Bit 5: Preamble Enable */
+#define PHY_L_PC_CIM (1<<4) /* Bit 4: Carrier Integrity Mon */
+#define PHY_L_PC_10_SER (1<<3) /* Bit 3: Use Serial Output */
+#define PHY_L_PC_ANISOL (1<<2) /* Bit 2: Unisolate Port */
+#define PHY_L_PC_TEN_BIT (1<<1) /* Bit 1: 10bit iface mode on */
+#define PHY_L_PC_ALTCLOCK (1<<0) /* Bit 0: (ro) ALTCLOCK Mode on */
+
+/***** PHY_LONE_Q_STAT 16 bit r/o Quick Status Reg *****/
+#define PHY_L_QS_D_RATE (3<<14) /* Bit 15..14: Data Rate */
+#define PHY_L_QS_TX_STAT (1<<13) /* Bit 13: Transmitting */
+#define PHY_L_QS_RX_STAT (1<<12) /* Bit 12: Receiving */
+#define PHY_L_QS_COL_STAT (1<<11) /* Bit 11: Collision */
+#define PHY_L_QS_L_STAT (1<<10) /* Bit 10: Link is up */
+#define PHY_L_QS_DUP_MOD (1<<9) /* Bit 9: Full/Half Duplex */
+#define PHY_L_QS_AN (1<<8) /* Bit 8: AutoNeg is On */
+#define PHY_L_QS_AN_C (1<<7) /* Bit 7: AN is Complete */
+#define PHY_L_QS_LLE (7<<4) /* Bit 6: Line Length Estim. */
+#define PHY_L_QS_PAUSE (1<<3) /* Bit 3: LP advertised Pause */
+#define PHY_L_QS_AS_PAUSE (1<<2) /* Bit 2: LP adv. asym. Pause */
+#define PHY_L_QS_ISOLATE (1<<1) /* Bit 1: CIM Isolated */
+#define PHY_L_QS_EVENT (1<<0) /* Bit 0: Event has occurred */
+
+/***** PHY_LONE_INT_ENAB 16 bit r/w Interrupt Enable Reg *****/
+/***** PHY_LONE_INT_STAT 16 bit r/o Interrupt Status Reg *****/
+ /* Bit 15..14: reserved */
+#define PHY_L_IS_AN_F (1<<13) /* Bit 13: Auto-Negotiation fault */
+ /* Bit 12: not described */
+#define PHY_L_IS_CROSS (1<<11) /* Bit 11: Crossover used */
+#define PHY_L_IS_POL (1<<10) /* Bit 10: Polarity correct. used*/
+#define PHY_L_IS_SS (1<<9) /* Bit 9: Smart Speed Downgrade*/
+#define PHY_L_IS_CFULL (1<<8) /* Bit 8: Counter Full */
+#define PHY_L_IS_AN_C (1<<7) /* Bit 7: AutoNeg Complete */
+#define PHY_L_IS_SPEED (1<<6) /* Bit 6: Speed Changed */
+#define PHY_L_IS_DUP (1<<5) /* Bit 5: Duplex Changed */
+#define PHY_L_IS_LS (1<<4) /* Bit 4: Link Status Changed */
+#define PHY_L_IS_ISOL (1<<3) /* Bit 3: Isolate Occured */
+#define PHY_L_IS_MDINT (1<<2) /* Bit 2: (ro) STAT: MII Int Pending */
+#define PHY_L_IS_INTEN (1<<1) /* Bit 1: ENAB: Enable IRQs */
+#define PHY_L_IS_FORCE (1<<0) /* Bit 0: ENAB: Force Interrupt */
+
+/* int. mask */
+#define PHY_L_DEF_MSK (PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN)
+
+/***** PHY_LONE_LED_CFG 16 bit r/w LED Configuration Reg *****/
+#define PHY_L_LC_LEDC (3<<14) /* Bit 15..14: Col/Blink/On/Off */
+#define PHY_L_LC_LEDR (3<<12) /* Bit 13..12: Rx/Blink/On/Off */
+#define PHY_L_LC_LEDT (3<<10) /* Bit 11..10: Tx/Blink/On/Off */
+#define PHY_L_LC_LEDG (3<<8) /* Bit 9..8: Giga/Blink/On/Off */
+#define PHY_L_LC_LEDS (3<<6) /* Bit 7..6: 10-100/Blink/On/Off */
+#define PHY_L_LC_LEDL (3<<4) /* Bit 5..4: Link/Blink/On/Off */
+#define PHY_L_LC_LEDF (3<<2) /* Bit 3..2: Duplex/Blink/On/Off */
+#define PHY_L_LC_PSTRECH (1<<1) /* Bit 1: Strech LED Pulses */
+#define PHY_L_LC_FREQ (1<<0) /* Bit 0: 30/100 ms */
+
+/***** PHY_LONE_PORT_CTRL 16 bit r/w Port Control Reg *****/
+#define PHY_L_PC_TX_TCLK (1<<15) /* Bit 15: Enable TX_TCLK */
+ /* Bit 14: reserved */
+#define PHY_L_PC_ALT_NP (1<<13) /* Bit 14: Alternate Next Page */
+#define PHY_L_PC_GMII_ALT (1<<12) /* Bit 13: Alternate GMII driver */
+ /* Bit 11: reserved */
+#define PHY_L_PC_TEN_CRS (1<<10) /* Bit 10: Extend CRS*/
+ /* Bit 9..0: not described */
+
+/***** PHY_LONE_CIM 16 bit r/o CIM Reg *****/
+#define PHY_L_CIM_ISOL (255<<8)/* Bit 15..8: Isolate Count */
+#define PHY_L_CIM_FALSE_CAR (255<<0)/* Bit 7..0: False Carrier Count */
+
+
+/*
+ * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding
+ */
+#define PHY_L_P_NO_PAUSE (0<<10) /* Bit 11..10: no Pause Mode */
+#define PHY_L_P_SYM_MD (1<<10) /* Bit 11..10: symmetric Pause Mode */
+#define PHY_L_P_ASYM_MD (2<<10) /* Bit 11..10: asymmetric Pause Mode */
+#define PHY_L_P_BOTH_MD (3<<10) /* Bit 11..10: both Pause Mode */
+
+
+/*
+ * National-Specific
+ */
+/***** PHY_NAT_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
+#define PHY_N_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */
+#define PHY_N_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */
+#define PHY_N_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */
+#define PHY_N_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */
+#define PHY_N_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */
+#define PHY_N_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */
+#define PHY_N_1000C_APC (1<<7) /* Bit 7: Asymmetric Pause Cap. */
+ /* Bit 6..0: reserved */
+
+/***** PHY_NAT_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
+#define PHY_N_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */
+#define PHY_N_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */
+#define PHY_N_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */
+#define PHY_N_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status*/
+#define PHY_N_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */
+#define PHY_N_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */
+#define PHY_N_1000C_LP_APC (1<<9) /* Bit 9: LP Asym. Pause Cap. */
+ /* Bit 8: reserved */
+#define PHY_N_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */
+
+/***** PHY_NAT_EXT_STAT 16 bit r/o Extended Status Register *****/
+#define PHY_N_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */
+#define PHY_N_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */
+#define PHY_N_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */
+#define PHY_N_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */
+ /* Bit 11..0: reserved */
+
+/* todo: those are still missing */
+/***** PHY_NAT_EXT_CTRL1 16 bit r/o Extended Control Reg1 *****/
+/***** PHY_NAT_Q_STAT1 16 bit r/o Quick Status Reg1 *****/
+/***** PHY_NAT_10B_OP 16 bit r/o 10Base-T Operations Reg *****/
+/***** PHY_NAT_EXT_CTRL2 16 bit r/o Extended Control Reg1 *****/
+/***** PHY_NAT_Q_STAT2 16 bit r/o Quick Status Reg2 *****/
+/***** PHY_NAT_PHY_ADDR 16 bit r/o PHY Address Register *****/
+
+/*
+ * Marvell-Specific
+ */
+/***** PHY_MARV_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
+/***** PHY_MARV_AUNE_LP 16 bit r/w Link Part Ability Reg *****/
+#define PHY_M_AN_NXT_PG BIT_15 /* Request Next Page */
+#define PHY_M_AN_ACK BIT_14 /* (ro) Acknowledge Received */
+#define PHY_M_AN_RF BIT_13 /* Remote Fault */
+ /* Bit 12: reserved */
+#define PHY_M_AN_ASP BIT_11 /* Asymmetric Pause */
+#define PHY_M_AN_PC BIT_10 /* MAC Pause implemented */
+#define PHY_M_AN_100_FD BIT_8 /* Advertise 100Base-TX Full Duplex */
+#define PHY_M_AN_100_HD BIT_7 /* Advertise 100Base-TX Half Duplex */
+#define PHY_M_AN_10_FD BIT_6 /* Advertise 10Base-TX Full Duplex */
+#define PHY_M_AN_10_HD BIT_5 /* Advertise 10Base-TX Half Duplex */
+
+/* special defines for FIBER (88E1011S only) */
+#define PHY_M_AN_ASP_X BIT_8 /* Asymmetric Pause */
+#define PHY_M_AN_PC_X BIT_7 /* MAC Pause implemented */
+#define PHY_M_AN_1000X_AHD BIT_6 /* Advertise 10000Base-X Half Duplex */
+#define PHY_M_AN_1000X_AFD BIT_5 /* Advertise 10000Base-X Full Duplex */
+
+/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */
+#define PHY_M_P_NO_PAUSE_X (0<<7) /* Bit 8.. 7: no Pause Mode */
+#define PHY_M_P_SYM_MD_X (1<<7) /* Bit 8.. 7: symmetric Pause Mode */
+#define PHY_M_P_ASYM_MD_X (2<<7) /* Bit 8.. 7: asymmetric Pause Mode */
+#define PHY_M_P_BOTH_MD_X (3<<7) /* Bit 8.. 7: both Pause Mode */
+
+/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
+#define PHY_M_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */
+#define PHY_M_1000C_MSE (1<<12) /* Bit 12: Manual Master/Slave Enable */
+#define PHY_M_1000C_MSC (1<<11) /* Bit 11: M/S Configuration (1=Master) */
+#define PHY_M_1000C_MPD (1<<10) /* Bit 10: Multi-Port Device */
+#define PHY_M_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */
+#define PHY_M_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */
+ /* Bit 7..0: reserved */
+
+/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/
+
+#define PHY_M_PC_TX_FFD_MSK (3<<14) /* Bit 15..14: Tx FIFO Depth Mask */
+#define PHY_M_PC_RX_FFD_MSK (3<<12) /* Bit 13..12: Rx FIFO Depth Mask */
+#define PHY_M_PC_ASS_CRS_TX (1<<11) /* Bit 11: Assert CRS on Transmit */
+#define PHY_M_PC_FL_GOOD (1<<10) /* Bit 10: Force Link Good */
+#define PHY_M_PC_EN_DET_MSK (3<<8) /* Bit 9.. 8: Energy Detect Mask */
+#define PHY_M_PC_ENA_EXT_D (1<<7) /* Bit 7: Enable Ext. Distance (10BT) */
+#define PHY_M_PC_MDIX_MSK (3<<5) /* Bit 6.. 5: MDI/MDIX Config. Mask */
+#define PHY_M_PC_DIS_125CLK (1<<4) /* Bit 4: Disable 125 CLK */
+#define PHY_M_PC_MAC_POW_UP (1<<3) /* Bit 3: MAC Power up */
+#define PHY_M_PC_SQE_T_ENA (1<<2) /* Bit 2: SQE Test Enabled */
+#define PHY_M_PC_POL_R_DIS (1<<1) /* Bit 1: Polarity Reversal Disabled */
+#define PHY_M_PC_DIS_JABBER (1<<0) /* Bit 0: Disable Jabber */
+
+#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x)
+#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */
+#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */
+#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */
+
+/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/
+#define PHY_M_PS_SPEED_MSK (3<<14) /* Bit 15..14: Speed Mask */
+#define PHY_M_PS_SPEED_1000 (1<<15) /* 10 = 1000 Mbps */
+#define PHY_M_PS_SPEED_100 (1<<14) /* 01 = 100 Mbps */
+#define PHY_M_PS_SPEED_10 0 /* 00 = 10 Mbps */
+#define PHY_M_PS_FULL_DUP (1<<13) /* Bit 13: Full Duplex */
+#define PHY_M_PS_PAGE_REC (1<<12) /* Bit 12: Page Received */
+#define PHY_M_PS_SPDUP_RES (1<<11) /* Bit 11: Speed & Duplex Resolved */
+#define PHY_M_PS_LINK_UP (1<<10) /* Bit 10: Link Up */
+#define PHY_M_PS_CABLE_MSK (3<<7) /* Bit 9.. 7: Cable Length Mask */
+#define PHY_M_PS_MDI_X_STAT (1<<6) /* Bit 6: MDI Crossover Stat (1=MDIX) */
+#define PHY_M_PS_DOWNS_STAT (1<<5) /* Bit 5: Downshift Status (1=downsh.) */
+#define PHY_M_PS_ENDET_STAT (1<<4) /* Bit 4: Energy Detect Status (1=act) */
+#define PHY_M_PS_TX_P_EN (1<<3) /* Bit 3: Tx Pause Enabled */
+#define PHY_M_PS_RX_P_EN (1<<2) /* Bit 2: Rx Pause Enabled */
+#define PHY_M_PS_POL_REV (1<<1) /* Bit 1: Polarity Reversed */
+#define PHY_M_PC_JABBER (1<<0) /* Bit 0: Jabber */
+
+#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN)
+
+/***** PHY_MARV_INT_MASK 16 bit r/w Interrupt Mask Reg *****/
+/***** PHY_MARV_INT_STAT 16 bit r/o Interrupt Status Reg *****/
+#define PHY_M_IS_AN_ERROR (1<<15) /* Bit 15: Auto-Negotiation Error */
+#define PHY_M_IS_LSP_CHANGE (1<<14) /* Bit 14: Link Speed Changed */
+#define PHY_M_IS_DUP_CHANGE (1<<13) /* Bit 13: Duplex Mode Changed */
+#define PHY_M_IS_AN_PR (1<<12) /* Bit 12: Page Received */
+#define PHY_M_IS_AN_COMPL (1<<11) /* Bit 11: Auto-Negotiation Completed */
+#define PHY_M_IS_LST_CHANGE (1<<10) /* Bit 10: Link Status Changed */
+#define PHY_M_IS_SYMB_ERROR (1<<9) /* Bit 9: Symbol Error */
+#define PHY_M_IS_FALSE_CARR (1<<8) /* Bit 8: False Carrier */
+#define PHY_M_IS_FIFO_ERROR (1<<7) /* Bit 7: FIFO Overflow/Underrun Error */
+#define PHY_M_IS_MDI_CHANGE (1<<6) /* Bit 6: MDI Crossover Changed */
+#define PHY_M_IS_DOWNSH_DET (1<<5) /* Bit 5: Downshift Detected */
+#define PHY_M_IS_END_CHANGE (1<<4) /* Bit 4: Energy Detect Changed */
+ /* Bit 3..2: reserved */
+#define PHY_M_IS_POL_CHANGE (1<<1) /* Bit 1: Polarity Changed */
+#define PHY_M_IS_JABBER (1<<0) /* Bit 0: Jabber */
+
+#define PHY_M_DEF_MSK (PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \
+ PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
+
+/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/
+#define PHY_M_EC_M_DSC_MSK (3<<10) /* Bit 11..10: Master downshift counter */
+#define PHY_M_EC_S_DSC_MSK (3<<8) /* Bit 9.. 8: Slave downshift counter */
+#define PHY_M_EC_MAC_S_MSK (7<<4) /* Bit 6.. 4: Def. MAC interface speed */
+
+#define PHY_M_EC_M_DSC(x) SHIFT10(x) /* 00=1x; 01=2x; 10=3x; 11=4x */
+#define PHY_M_EC_S_DSC(x) SHIFT8(x) /* 00=dis; 01=1x; 10=2x; 11=3x */
+#define PHY_M_EC_MAC_S(x) SHIFT4(x) /* 01X=0; 110=2.5; 111=25 (MHz) */
+
+#define MAC_TX_CLK_0_MHZ 2
+#define MAC_TX_CLK_2_5_MHZ 6
+#define MAC_TX_CLK_25_MHZ 7
+
+/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/
+#define PHY_M_LEDC_DIS_LED (1<<15) /* Bit 15: Disable LED */
+#define PHY_M_LEDC_PULS_MSK (7<<12) /* Bit 14..12: Pulse Stretch Mask */
+#define PHY_M_LEDC_F_INT (1<<11) /* Bit 11: Force Interrupt */
+#define PHY_M_LEDC_BL_R_MSK (7<<8) /* Bit 10.. 8: Blink Rate Mask */
+ /* Bit 7.. 5: reserved */
+#define PHY_M_LEDC_LINK_MSK (3<<3) /* Bit 4.. 3: Link Control Mask */
+#define PHY_M_LEDC_DP_CTRL (1<<2) /* Bit 2: Duplex Control */
+#define PHY_M_LEDC_RX_CTRL (1<<1) /* Bit 1: Rx activity / Link */
+#define PHY_M_LEDC_TX_CTRL (1<<0) /* Bit 0: Tx activity / Link */
+
+#define PHY_M_LED_PULS_DUR(x) SHIFT12(x) /* Pulse Stretch Duration */
+
+#define PULS_NO_STR 0 /* no pulse stretching */
+#define PULS_21MS 1 /* 21 ms to 42 ms */
+#define PULS_42MS 2 /* 42 ms to 84 ms */
+#define PULS_84MS 3 /* 84 ms to 170 ms */
+#define PULS_170MS 4 /* 170 ms to 340 ms */
+#define PULS_340MS 5 /* 340 ms to 670 ms */
+#define PULS_670MS 6 /* 670 ms to 1.3 s */
+#define PULS_1300MS 7 /* 1.3 s to 2.7 s */
+
+#define PHY_M_LED_BLINK_RT(x) SHIFT8(x) /* Blink Rate */
+
+#define BLINK_42MS 0 /* 42 ms */
+#define BLINK_84MS 1 /* 84 ms */
+#define BLINK_170MS 2 /* 170 ms */
+#define BLINK_340MS 3 /* 340 ms */
+#define BLINK_670MS 4 /* 670 ms */
+ /* values 5 - 7: reserved */
+
+/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/
+#define PHY_M_LED_MO_DUP(x) SHIFT10(x) /* Bit 11..10: Duplex */
+#define PHY_M_LED_MO_10(x) SHIFT8(x) /* Bit 9.. 8: Link 10 */
+#define PHY_M_LED_MO_100(x) SHIFT6(x) /* Bit 7.. 6: Link 100 */
+#define PHY_M_LED_MO_1000(x) SHIFT4(x) /* Bit 5.. 4: Link 1000 */
+#define PHY_M_LED_MO_RX(x) SHIFT2(x) /* Bit 3.. 2: Rx */
+#define PHY_M_LED_MO_TX(x) SHIFT0(x) /* Bit 1.. 0: Tx */
+
+#define MO_LED_NORM 0
+#define MO_LED_BLINK 1
+#define MO_LED_OFF 2
+#define MO_LED_ON 3
+
+/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/
+ /* Bit 15.. 7: reserved */
+#define PHY_M_EC2_FI_IMPED (1<<6) /* Bit 6: Fiber Input Impedance */
+#define PHY_M_EC2_FO_IMPED (1<<5) /* Bit 5: Fiber Output Impedance */
+#define PHY_M_EC2_FO_M_CLK (1<<4) /* Bit 4: Fiber Mode Clock Enable */
+#define PHY_M_EC2_FO_BOOST (1<<3) /* Bit 3: Fiber Output Boost */
+#define PHY_M_EC2_FO_AM_MSK 7 /* Bit 2.. 0: Fiber Output Amplitude */
+
+/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/
+#define PHY_M_CABD_ENA_TEST (1<<15) /* Bit 15: Enable Test */
+#define PHY_M_CABD_STAT_MSK (3<<13) /* Bit 14..13: Status */
+ /* Bit 12.. 8: reserved */
+#define PHY_M_CABD_DIST_MSK 0xff /* Bit 7.. 0: Distance */
+
+/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */
+#define CABD_STAT_NORMAL 0
+#define CABD_STAT_SHORT 1
+#define CABD_STAT_OPEN 2
+#define CABD_STAT_FAIL 3
+
+
+/*
+ * GMAC registers
+ *
+ * The GMAC registers are 16 or 32 bits wide.
+ * The GMACs host processor interface is 16 bits wide,
+ * therefore ALL registers will be addressed with 16 bit accesses.
+ *
+ * The following macros are provided to access the GMAC registers
+ * GM_IN16(), GM_OUT16, GM_IN32(), GM_OUT32(), GM_INADR(), GM_OUTADR(),
+ * GM_INHASH(), and GM_OUTHASH().
+ * The macros are defined in SkGeHw.h.
+ *
+ * Note: NA reg = Network Address e.g DA, SA etc.
+ *
+ */
+
+/* Port Registers */
+#define GM_GP_STAT 0x0000 /* 16 bit r/o General Purpose Status */
+#define GM_GP_CTRL 0x0004 /* 16 bit r/w General Purpose Control */
+#define GM_TX_CTRL 0x0008 /* 16 bit r/w Transmit Control Reg. */
+#define GM_RX_CTRL 0x000c /* 16 bit r/w Receive Control Reg. */
+#define GM_TX_FLOW_CTRL 0x0010 /* 16 bit r/w Transmit Flow Control */
+#define GM_TX_PARAM 0x0014 /* 16 bit r/w Transmit Parameter Reg. */
+#define GM_SERIAL_MODE 0x0018 /* 16 bit r/w Serial Mode Register */
+
+/* Source Address Registers */
+#define GM_SRC_ADDR_1L 0x001c /* 16 bit r/w Source Address 1 (low) */
+#define GM_SRC_ADDR_1M 0x0020 /* 16 bit r/w Source Address 1 (middle) */
+#define GM_SRC_ADDR_1H 0x0024 /* 16 bit r/w Source Address 1 (high) */
+#define GM_SRC_ADDR_2L 0x0028 /* 16 bit r/w Source Address 2 (low) */
+#define GM_SRC_ADDR_2M 0x002c /* 16 bit r/w Source Address 2 (middle) */
+#define GM_SRC_ADDR_2H 0x0030 /* 16 bit r/w Source Address 2 (high) */
+
+/* Multicast Address Hash Registers */
+#define GM_MC_ADDR_H1 0x0034 /* 16 bit r/w Multicast Address Hash 1 */
+#define GM_MC_ADDR_H2 0x0038 /* 16 bit r/w Multicast Address Hash 2 */
+#define GM_MC_ADDR_H3 0x003c /* 16 bit r/w Multicast Address Hash 3 */
+#define GM_MC_ADDR_H4 0x0040 /* 16 bit r/w Multicast Address Hash 4 */
+
+/* Interrupt Source Registers */
+#define GM_TX_IRQ_SRC 0x0044 /* 16 bit r/o Tx Overflow IRQ Source */
+#define GM_RX_IRQ_SRC 0x0048 /* 16 bit r/o Rx Overflow IRQ Source */
+#define GM_TR_IRQ_SRC 0x004c /* 16 bit r/o Tx/Rx Over. IRQ Source */
+
+/* Interrupt Mask Registers */
+#define GM_TX_IRQ_MSK 0x0050 /* 16 bit r/w Tx Overflow IRQ Mask */
+#define GM_RX_IRQ_MSK 0x0054 /* 16 bit r/w Rx Overflow IRQ Mask */
+#define GM_TR_IRQ_MSK 0x0058 /* 16 bit r/w Tx/Rx Over. IRQ Mask */
+
+/* Serial Management Interface (SMI) Registers */
+#define GM_SMI_CTRL 0x0080 /* 16 bit r/w SMI Control Register */
+#define GM_SMI_DATA 0x0084 /* 16 bit r/w SMI Data Register */
+#define GM_PHY_ADDR 0x0088 /* 16 bit r/w GPHY Address Register */
+
+/* MIB Counters */
+#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */
+#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */
+
+/*
+ * MIB Counters base address definitions (low word) -
+ * use offset 4 for access to high word (32 bit r/o)
+ */
+#define GM_RXF_UC_OK \
+ (GM_MIB_CNT_BASE + 0) /* Unicast Frames Received OK */
+#define GM_RXF_BC_OK \
+ (GM_MIB_CNT_BASE + 8) /* Broadcast Frames Received OK */
+#define GM_RXF_MPAUSE \
+ (GM_MIB_CNT_BASE + 16) /* Pause MAC Ctrl Frames Received */
+#define GM_RXF_MC_OK \
+ (GM_MIB_CNT_BASE + 24) /* Multicast Frames Received OK */
+#define GM_RXF_FCS_ERR \
+ (GM_MIB_CNT_BASE + 32) /* Rx Frame Check Seq. Error */
+ /* GM_MIB_CNT_BASE + 40: reserved */
+#define GM_RXO_OK_LO \
+ (GM_MIB_CNT_BASE + 48) /* Octets Received OK Low */
+#define GM_RXO_OK_HI \
+ (GM_MIB_CNT_BASE + 56) /* Octets Received OK High */
+#define GM_RXO_ERR_LO \
+ (GM_MIB_CNT_BASE + 64) /* Octets Received Invalid Low */
+#define GM_RXO_ERR_HI \
+ (GM_MIB_CNT_BASE + 72) /* Octets Received Invalid High */
+#define GM_RXF_SHT \
+ (GM_MIB_CNT_BASE + 80) /* Frames <64 Byte Received OK */
+#define GM_RXE_FRAG \
+ (GM_MIB_CNT_BASE + 88) /* Frames <64 Byte Receeived with FCS Err */
+#define GM_RXF_64B \
+ (GM_MIB_CNT_BASE + 96) /* 64 Byte Rx Frame */
+#define GM_RXF_127B \
+ (GM_MIB_CNT_BASE + 104) /* 65-127 Byte Rx Frame */
+#define GM_RXF_255B \
+ (GM_MIB_CNT_BASE + 112) /* 128-255 Byte Rx Frame */
+#define GM_RXF_511B \
+ (GM_MIB_CNT_BASE + 120) /* 256-511 Byte Rx Frame */
+#define GM_RXF_1023B \
+ (GM_MIB_CNT_BASE + 128) /* 512-1023 Byte Rx Frame */
+#define GM_RXF_1518B \
+ (GM_MIB_CNT_BASE + 136) /* 1024-1518 Byte Rx Frame */
+#define GM_RXF_MAX_SZ \
+ (GM_MIB_CNT_BASE + 144) /* 1519-MaxSize Byte Rx Frame */
+#define GM_RXF_LNG_ERR \
+ (GM_MIB_CNT_BASE + 152) /* Rx Frame too Long Error */
+#define GM_RXF_JAB_PKT \
+ (GM_MIB_CNT_BASE + 160) /* Rx Jabber Packet Frame */
+ /* GM_MIB_CNT_BASE + 168: reserved */
+#define GM_RXE_FIFO_OV \
+ (GM_MIB_CNT_BASE + 176) /* Rx FIFO overflow Event */
+ /* GM_MIB_CNT_BASE + 184: reserved */
+#define GM_TXF_UC_OK \
+ (GM_MIB_CNT_BASE + 192) /* Unicast Frames Xmitted OK */
+#define GM_TXF_BC_OK \
+ (GM_MIB_CNT_BASE + 200) /* Broadcast Frames Xmitted OK */
+#define GM_TXF_MPAUSE \
+ (GM_MIB_CNT_BASE + 208) /* Pause MAC Ctrl Frames Xmitted */
+#define GM_TXF_MC_OK \
+ (GM_MIB_CNT_BASE + 216) /* Multicast Frames Xmitted OK */
+#define GM_TXO_OK_LO \
+ (GM_MIB_CNT_BASE + 224) /* Octets Transmitted OK Low */
+#define GM_TXO_OK_HI \
+ (GM_MIB_CNT_BASE + 232) /* Octets Transmitted OK High */
+#define GM_TXF_64B \
+ (GM_MIB_CNT_BASE + 240) /* 64 Byte Tx Frame */
+#define GM_TXF_127B \
+ (GM_MIB_CNT_BASE + 248) /* 65-127 Byte Tx Frame */
+#define GM_TXF_255B \
+ (GM_MIB_CNT_BASE + 256) /* 128-255 Byte Tx Frame */
+#define GM_TXF_511B \
+ (GM_MIB_CNT_BASE + 264) /* 256-511 Byte Tx Frame */
+#define GM_TXF_1023B \
+ (GM_MIB_CNT_BASE + 272) /* 512-1023 Byte Tx Frame */
+#define GM_TXF_1518B \
+ (GM_MIB_CNT_BASE + 280) /* 1024-1518 Byte Tx Frame */
+#define GM_TXF_MAX_SZ \
+ (GM_MIB_CNT_BASE + 288) /* 1519-MaxSize Byte Tx Frame */
+ /* GM_MIB_CNT_BASE + 296: reserved */
+#define GM_TXF_COL \
+ (GM_MIB_CNT_BASE + 304) /* Tx Collision */
+#define GM_TXF_LAT_COL \
+ (GM_MIB_CNT_BASE + 312) /* Tx Late Collision */
+#define GM_TXF_ABO_COL \
+ (GM_MIB_CNT_BASE + 320) /* Tx aborted due to Exces. Col. */
+#define GM_TXF_MUL_COL \
+ (GM_MIB_CNT_BASE + 328) /* Tx Multiple Collision */
+#define GM_TXF_SNG_COL \
+ (GM_MIB_CNT_BASE + 336) /* Tx Single Collision */
+#define GM_TXE_FIFO_UR \
+ (GM_MIB_CNT_BASE + 344) /* Tx FIFO Underrun Event */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * GMAC Bit Definitions
+ *
+ * If the bit access behaviour differs from the register access behaviour
+ * (r/w, r/o) this is documented after the bit number.
+ * The following bit access behaviours are used:
+ * (sc) self clearing
+ * (r/o) read only
+ */
+
+/* GM_GP_STAT 16 bit r/o General Purpose Status Register */
+
+#define GM_GPSR_SPEED (1<<15) /* Bit 15: Port Speed (1 = 100 Mbps) */
+#define GM_GPSR_DUPLEX (1<<14) /* Bit 14: Duplex Mode (1 = Full) */
+#define GM_GPSR_FC_TX_DIS (1<<13) /* Bit 13: Tx Flow Control Mode Disabled */
+#define GM_GPSR_LINK_UP (1<<12) /* Bit 12: Link Up Status */
+#define GM_GPSR_PAUSE (1<<11) /* Bit 11: Pause State */
+#define GM_GPSR_TX_ACTIVE (1<<10) /* Bit 10: Tx in Progress */
+#define GM_GPSR_EXC_COL (1<<9) /* Bit 9: Excessive Collisions Occured */
+#define GM_GPSR_LAT_COL (1<<8) /* Bit 8: Late Collisions Occured */
+ /* Bit 7..6: reserved */
+#define GM_GPSR_PHY_ST_CH (1<<5) /* Bit 5: PHY Status Change */
+#define GM_GPSR_GIG_SPEED (1<<4) /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */
+#define GM_GPSR_PART_MODE (1<<3) /* Bit 3: Partition mode */
+#define GM_GPSR_FC_RX_DIS (1<<2) /* Bit 2: Rx Flow Control Mode Disabled */
+#define GM_GPSR_PROM_EN (1<<1) /* Bit 1: Promiscuous Mode Enabled */
+ /* Bit 0: reserved */
+
+/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */
+ /* Bit 15: reserved */
+#define GM_GPCR_PROM_ENA (1<<14) /* Bit 14: Enable Promiscuous Mode */
+#define GM_GPCR_FC_TX_DIS (1<<13) /* Bit 13: Disable Tx Flow Control Mode */
+#define GM_GPCR_TX_ENA (1<<12) /* Bit 12: Enable Transmit */
+#define GM_GPCR_RX_ENA (1<<11) /* Bit 11: Enable Receive */
+#define GM_GPCR_BURST_ENA (1<<10) /* Bit 10: Enable Burst Mode */
+#define GM_GPCR_LOOP_ENA (1<<9) /* Bit 9: Enable MAC Loopback Mode */
+#define GM_GPCR_PART_ENA (1<<8) /* Bit 8: Enable Partition Mode */
+#define GM_GPCR_GIGS_ENA (1<<7) /* Bit 7: Gigabit Speed (1000 Mbps) */
+#define GM_GPCR_FL_PASS (1<<6) /* Bit 6: Force Link Pass */
+#define GM_GPCR_DUP_FULL (1<<5) /* Bit 5: Full Duplex Mode */
+#define GM_GPCR_FC_RX_DIS (1<<4) /* Bit 4: Disable Rx Flow Control Mode */
+#define GM_GPCR_SPEED_100 (1<<3) /* Bit 3: Port Speed 100 Mbps */
+#define GM_GPCR_AU_DUP_DIS (1<<2) /* Bit 2: Disable Auto-Update for Duplex */
+#define GM_GPCR_AU_FCT_DIS (1<<1) /* Bit 1: Disable Auto-Update for Flow-c. */
+#define GM_GPCR_AU_SPD_DIS (1<<0) /* Bit 0: Disable Auto-Update for Speed */
+
+#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
+#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\
+ GM_GPCR_AU_SPD_DIS)
+
+/* GM_TX_CTRL 16 bit r/w Transmit Control Register */
+
+#define GM_TXCR_FORCE_JAM (1<<15) /* Bit 15: Force Jam / Flow-Control */
+#define GM_TXCR_CRC_DIS (1<<14) /* Bit 14: Disable insertion of CRC */
+#define GM_TXCR_PAD_DIS (1<<13) /* Bit 13: Disable padding of packets */
+#define GM_TXCR_COL_THR (4<<10) /* Bit 12..10: Collision Threshold */
+
+/* GM_RX_CTRL 16 bit r/w Receive Control Register */
+#define GM_RXCR_UCF_ENA (1<<15) /* Bit 15: Enable Unicast filtering */
+#define GM_RXCR_MCF_ENA (1<<14) /* Bit 14: Enable Multicast filtering */
+#define GM_RXCR_CRC_DIS (1<<13) /* Bit 13: Remove 4-byte CRC */
+#define GM_RXCR_PASS_FC (1<<12) /* Bit 12: Pass FC packets to FIFO */
+
+/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */
+#define GM_TXPA_JAMLEN_MSK (0x03<<14) /* Bit 15..14: Jam Length */
+#define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13..9: Jam IPG */
+#define GM_TXPA_JAMDAT_MSK (0x1f<<4) /* Bit 8..4: IPG Jam to Data */
+ /* Bit 3..0: reserved */
+#define JAM_LEN_VAL(x) SHIFT14(x)
+#define JAM_IPG_VAL(x) SHIFT9(x)
+#define IPG_JAM_DATA(x) SHIFT4(x)
+
+/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */
+#define GM_SMOD_DATABL_MSK (0x1f<<11) /* Bit 15..11: Data Blinder */
+#define GM_SMOD_LIMIT_4 (1<<10) /* Bit 10: 4 consecutive transmit trials */
+#define GM_SMOD_VLAN_ENA (1<<9) /* Bit 9: Enable VLAN (Max. Frame Length) */
+#define GM_SMOD_JUMBO_ENA (1<<8) /* Bit 8: Enable Jumbo (Max. Frame Length) */
+ /* Bit 7..5: reserved */
+#define GM_SMOD_IPG_MSK 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */
+
+#define DATA_BLIND_VAL(x) SHIFT11(x)
+#define DATA_BLIND_FAST_ETH 0x1c
+#define DATA_BLIND_GIGABIT 4
+
+#define IPG_VAL_FAST_ETH 0x1e
+#define IPG_VAL_GIGABIT 6
+
+/* GM_SMI_CTRL 16 bit r/w SMI Control Register */
+
+#define GM_SMI_CT_PHY_AD(x) SHIFT11(x)
+#define GM_SMI_CT_REG_AD(x) SHIFT6(x)
+#define GM_SMI_CT_OP_RD (1<<5) /* Bit 5: OpCode Read (0=Write)*/
+#define GM_SMI_CT_RD_VAL (1<<4) /* Bit 4: Read Valid (Read completed) */
+#define GM_SMI_CT_BUSY (1<<3) /* Bit 3: Busy (Operation in progress) */
+ /* Bit 2..0: reserved */
+
+/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */
+ /* Bit 15..6: reserved */
+#define GM_PAR_MIB_CLR (1<<5) /* Bit 5: Set MIB Clear Counter Mode */
+#define GM_PAR_MIB_TST (1<<4) /* Bit 4: MIB Load Counter (Test Mode) */
+ /* Bit 3..0: reserved */
+
+/* Receive Frame Status Encoding */
+#define GMR_FS_LEN (0xffffUL<<16) /* Bit 31..16: Rx Frame Length */
+ /* Bit 15..14: reserved */
+#define GMR_FS_VLAN (1L<<13) /* Bit 13: VLAN Packet */
+#define GMR_FS_JABBER (1L<<12) /* Bit 12: Jabber Packet */
+#define GMR_FS_UN_SIZE (1L<<11) /* Bit 11: Undersize Packet */
+#define GMR_FS_MC (1L<<10) /* Bit 10: Multicast Packet */
+#define GMR_FS_BC (1L<<9) /* Bit 9: Broadcast Packet */
+#define GMR_FS_RX_OK (1L<<8) /* Bit 8: Receive OK (Good Packet) */
+#define GMR_FS_GOOD_FC (1L<<7) /* Bit 7: Good Flow-Control Packet */
+#define GMR_FS_BAD_FC (1L<<6) /* Bit 6: Bad Flow-Control Packet */
+#define GMR_FS_MII_ERR (1L<<5) /* Bit 5: MII Error */
+#define GMR_FS_LONG_ERR (1L<<4) /* Bit 4: Too Long Packet */
+#define GMR_FS_FRAGMENT (1L<<3) /* Bit 3: Fragment */
+ /* Bit 2: reserved */
+#define GMR_FS_CRC_ERR (1L<<1) /* Bit 1: CRC Error */
+#define GMR_FS_RX_FF_OV (1L<<0) /* Bit 0: Rx FIFO Overflow */
+
+/*
+ * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR)
+ */
+#define GMR_FS_ANY_ERR (GMR_FS_CRC_ERR | \
+ GMR_FS_LONG_ERR | \
+ GMR_FS_MII_ERR | \
+ GMR_FS_BAD_FC | \
+ GMR_FS_GOOD_FC | \
+ GMR_FS_JABBER)
+
+/* Rx GMAC FIFO Flush Mask (default) */
+#define RX_FF_FL_DEF_MSK (GMR_FS_CRC_ERR | \
+ GMR_FS_RX_FF_OV | \
+ GMR_FS_MII_ERR | \
+ GMR_FS_BAD_FC | \
+ GMR_FS_GOOD_FC | \
+ GMR_FS_UN_SIZE | \
+ GMR_FS_JABBER)
+
+/* typedefs *******************************************************************/
+
+
+/* function prototypes ********************************************************/
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INC_XMAC_H */
diff --git a/drivers/net/sk98lin/skaddr.c b/drivers/net/sk98lin/skaddr.c
new file mode 100644
index 0000000..ed79c04
--- /dev/null
+++ b/drivers/net/sk98lin/skaddr.c
@@ -0,0 +1,1879 @@
+/******************************************************************************
+ *
+ * Name: skaddr.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.48 $
+ * Date: $Date: 2003/02/12 17:09:37 $
+ * Purpose: Manage Addresses (Multicast and Unicast) and Promiscuous Mode.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skaddr.c,v $
+ * Revision 1.48 2003/02/12 17:09:37 tschilli
+ * Fix in SkAddrOverride() to set both (physical and logical) MAC addresses
+ * in case that both addresses are identical.
+ *
+ * Revision 1.47 2002/09/17 06:31:10 tschilli
+ * Handling of SK_PROM_MODE_ALL_MC flag in SkAddrGmacMcUpdate()
+ * and SkAddrGmacPromiscuousChange() fixed.
+ * Editorial changes.
+ *
+ * Revision 1.46 2002/08/22 07:55:41 tschilli
+ * New function SkGmacMcHash() for GMAC multicast hashing algorithm added.
+ * Editorial changes.
+ *
+ * Revision 1.45 2002/08/15 12:29:35 tschilli
+ * SkAddrGmacMcUpdate() and SkAddrGmacPromiscuousChange() changed.
+ *
+ * Revision 1.44 2002/08/14 12:18:03 rschmidt
+ * Replaced direct handling of MAC Hashing (XMAC and GMAC)
+ * with routine SkMacHashing().
+ * Replaced wrong 3rd para 'i' with 'PortNumber' in SkMacPromiscMode().
+ *
+ * Revision 1.43 2002/08/13 09:37:43 rschmidt
+ * Corrected some SK_DBG_MSG outputs.
+ * Replaced wrong 2nd para pAC with IoC in SkMacPromiscMode().
+ * Editorial changes.
+ *
+ * Revision 1.42 2002/08/12 11:24:36 rschmidt
+ * Remove setting of logical MAC address GM_SRC_ADDR_2 in SkAddrInit().
+ * Replaced direct handling of MAC Promiscuous Mode (XMAC and GMAC)
+ * with routine SkMacPromiscMode().
+ * Editorial changes.
+ *
+ * Revision 1.41 2002/06/10 13:52:18 tschilli
+ * Changes for handling YUKON.
+ * All changes are internally and not visible to the programmer
+ * using this module.
+ *
+ * Revision 1.40 2001/02/14 14:04:59 rassmann
+ * Editorial changes.
+ *
+ * Revision 1.39 2001/01/30 10:30:04 rassmann
+ * Editorial changes.
+ *
+ * Revision 1.38 2001/01/25 16:26:52 rassmann
+ * Ensured that logical address overrides are done on net's active port.
+ *
+ * Revision 1.37 2001/01/22 13:41:34 rassmann
+ * Supporting two nets on dual-port adapters.
+ *
+ * Revision 1.36 2000/08/07 11:10:39 rassmann
+ * Editorial changes.
+ *
+ * Revision 1.35 2000/05/04 09:38:41 rassmann
+ * Editorial changes.
+ * Corrected multicast address hashing.
+ *
+ * Revision 1.34 1999/11/22 13:23:44 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.33 1999/05/28 10:56:06 rassmann
+ * Editorial changes.
+ *
+ * Revision 1.32 1999/03/31 10:59:20 rassmann
+ * Returning Success instead of DupAddr if address shall be overridden
+ * with same value.
+ *
+ * Revision 1.31 1999/01/14 16:18:17 rassmann
+ * Corrected multicast initialization.
+ *
+ * Revision 1.30 1999/01/04 10:30:35 rassmann
+ * SkAddrOverride only possible after SK_INIT_IO phase.
+ *
+ * Revision 1.29 1998/12/29 13:13:10 rassmann
+ * An address override is now preserved in the SK_INIT_IO phase.
+ * All functions return an int now.
+ * Extended parameter checking.
+ *
+ * Revision 1.28 1998/12/01 11:45:53 rassmann
+ * Code cleanup.
+ *
+ * Revision 1.27 1998/12/01 09:22:49 rassmann
+ * SkAddrMcAdd and SkAddrMcUpdate returned SK_MC_FILTERING_INEXACT
+ * too often.
+ *
+ * Revision 1.26 1998/11/24 12:39:44 rassmann
+ * Reserved multicast entry for BPDU address.
+ * 13 multicast entries left for protocol.
+ *
+ * Revision 1.25 1998/11/17 16:54:23 rassmann
+ * Using exact match for up to 14 multicast addresses.
+ * Still receiving all multicasts if more addresses are added.
+ *
+ * Revision 1.24 1998/11/13 17:24:31 rassmann
+ * Changed return value of SkAddrOverride to int.
+ *
+ * Revision 1.23 1998/11/13 16:56:18 rassmann
+ * Added macro SK_ADDR_COMPARE.
+ * Changed return type of SkAddrOverride to SK_BOOL.
+ *
+ * Revision 1.22 1998/11/04 17:06:17 rassmann
+ * Corrected McUpdate and PromiscuousChange functions.
+ *
+ * Revision 1.21 1998/10/29 14:34:04 rassmann
+ * Clearing SK_ADDR struct at startup.
+ *
+ * Revision 1.20 1998/10/28 18:16:34 rassmann
+ * Avoiding I/Os before SK_INIT_RUN level.
+ * Aligning InexactFilter.
+ *
+ * Revision 1.19 1998/10/28 11:29:28 rassmann
+ * Programming physical address in SkAddrMcUpdate.
+ * Corrected programming of exact match entries.
+ *
+ * Revision 1.18 1998/10/28 10:34:48 rassmann
+ * Corrected reading of physical addresses.
+ *
+ * Revision 1.17 1998/10/28 10:26:13 rassmann
+ * Getting ports' current MAC addresses from EPROM now.
+ * Added debug output.
+ *
+ * Revision 1.16 1998/10/27 16:20:12 rassmann
+ * Reading MAC address byte by byte.
+ *
+ * Revision 1.15 1998/10/22 11:39:09 rassmann
+ * Corrected signed/unsigned mismatches.
+ *
+ * Revision 1.14 1998/10/19 17:12:35 rassmann
+ * Syntax corrections.
+ *
+ * Revision 1.13 1998/10/19 17:02:19 rassmann
+ * Now reading permanent MAC addresses from CRF.
+ *
+ * Revision 1.12 1998/10/15 15:15:48 rassmann
+ * Changed Flags Parameters from SK_U8 to int.
+ * Checked with lint.
+ *
+ * Revision 1.11 1998/09/24 19:15:12 rassmann
+ * Code cleanup.
+ *
+ * Revision 1.10 1998/09/18 20:18:54 rassmann
+ * Added HW access.
+ * Implemented swapping.
+ *
+ * Revision 1.9 1998/09/16 11:32:00 rassmann
+ * Including skdrv1st.h again. :(
+ *
+ * Revision 1.8 1998/09/16 11:09:34 rassmann
+ * Syntax corrections.
+ *
+ * Revision 1.7 1998/09/14 17:06:34 rassmann
+ * Minor changes.
+ *
+ * Revision 1.6 1998/09/07 08:45:41 rassmann
+ * Syntax corrections.
+ *
+ * Revision 1.5 1998/09/04 19:40:19 rassmann
+ * Interface enhancements.
+ *
+ * Revision 1.4 1998/09/04 12:14:12 rassmann
+ * Interface cleanup.
+ *
+ * Revision 1.3 1998/09/02 16:56:40 rassmann
+ * Updated interface.
+ *
+ * Revision 1.2 1998/08/27 14:26:09 rassmann
+ * Updated interface.
+ *
+ * Revision 1.1 1998/08/21 08:30:22 rassmann
+ * First public version.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This module is intended to manage multicast addresses, address override,
+ * and promiscuous mode on GEnesis and Yukon adapters.
+ *
+ * Address Layout:
+ * port address: physical MAC address
+ * 1st exact match: logical MAC address (GEnesis only)
+ * 2nd exact match: RLMT multicast (GEnesis only)
+ * exact match 3-13: OS-specific multicasts (GEnesis only)
+ *
+ * Include File Hierarchy:
+ *
+ * "skdrv1st.h"
+ * "skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+#ifndef lint
+static const char SysKonnectFileId[] =
+ "@(#) $Id: skaddr.c,v 1.48 2003/02/12 17:09:37 tschilli Exp $ (C) SysKonnect.";
+#endif /* !defined(lint) */
+
+#define __SKADDR_C
+
+#ifdef __cplusplus
+#error C++ is not yet supported.
+extern "C" {
+#endif /* cplusplus */
+
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+
+/* defines ********************************************************************/
+
+
+#define XMAC_POLY 0xEDB88320UL /* CRC32-Poly - XMAC: Little Endian */
+#define GMAC_POLY 0x04C11DB7L /* CRC16-Poly - GMAC: Little Endian */
+#define HASH_BITS 6 /* #bits in hash */
+#define SK_MC_BIT 0x01
+
+/* Error numbers and messages. */
+
+#define SKERR_ADDR_E001 (SK_ERRBASE_ADDR + 0)
+#define SKERR_ADDR_E001MSG "Bad Flags."
+#define SKERR_ADDR_E002 (SKERR_ADDR_E001 + 1)
+#define SKERR_ADDR_E002MSG "New Error."
+
+/* typedefs *******************************************************************/
+
+/* None. */
+
+/* global variables ***********************************************************/
+
+/* 64-bit hash values with all bits set. */
+
+SK_U16 OnesHash[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
+
+/* local variables ************************************************************/
+
+#ifdef DEBUG
+static int Next0[SK_MAX_MACS] = {0, 0};
+#endif /* DEBUG */
+
+/* functions ******************************************************************/
+
+/******************************************************************************
+ *
+ * SkAddrInit - initialize data, set state to init
+ *
+ * Description:
+ *
+ * SK_INIT_DATA
+ * ============
+ *
+ * This routine clears the multicast tables and resets promiscuous mode.
+ * Some entries are reserved for the "logical MAC address", the
+ * SK-RLMT multicast address, and the BPDU multicast address.
+ *
+ *
+ * SK_INIT_IO
+ * ==========
+ *
+ * All permanent MAC addresses are read from EPROM.
+ * If the current MAC addresses are not already set in software,
+ * they are set to the values of the permanent addresses.
+ * The current addresses are written to the corresponding MAC.
+ *
+ *
+ * SK_INIT_RUN
+ * ===========
+ *
+ * Nothing.
+ *
+ * Context:
+ * init, pageable
+ *
+ * Returns:
+ * SK_ADDR_SUCCESS
+ */
+int SkAddrInit(
+SK_AC *pAC, /* the adapter context */
+SK_IOC IoC, /* I/O context */
+int Level) /* initialization level */
+{
+ int j;
+ SK_U32 i;
+ SK_U8 *InAddr;
+ SK_U16 *OutAddr;
+ SK_ADDR_PORT *pAPort;
+
+ switch (Level) {
+ case SK_INIT_DATA:
+ SK_MEMSET((char *) &pAC->Addr, 0, sizeof(SK_ADDR));
+
+ for (i = 0; i < SK_MAX_MACS; i++) {
+ pAPort = &pAC->Addr.Port[i];
+ pAPort->PromMode = SK_PROM_MODE_NONE;
+
+ pAPort->FirstExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
+ pAPort->FirstExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
+ pAPort->NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
+ pAPort->NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
+ }
+#ifdef xDEBUG
+ for (i = 0; i < SK_MAX_MACS; i++) {
+ if (pAC->Addr.Port[i].NextExactMatchRlmt <
+ SK_ADDR_FIRST_MATCH_RLMT) {
+ Next0[i] |= 4;
+ }
+ }
+#endif /* DEBUG */
+ /* pAC->Addr.InitDone = SK_INIT_DATA; */
+ break;
+
+ case SK_INIT_IO:
+ for (i = 0; i < SK_MAX_NETS; i++) {
+ pAC->Addr.Net[i].ActivePort = pAC->Rlmt.Net[i].ActivePort;
+ }
+#ifdef xDEBUG
+ for (i = 0; i < SK_MAX_MACS; i++) {
+ if (pAC->Addr.Port[i].NextExactMatchRlmt <
+ SK_ADDR_FIRST_MATCH_RLMT) {
+ Next0[i] |= 8;
+ }
+ }
+#endif /* DEBUG */
+
+ /* Read permanent logical MAC address from Control Register File. */
+ for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
+ InAddr = (SK_U8 *) &pAC->Addr.Net[0].PermanentMacAddress.a[j];
+ SK_IN8(IoC, B2_MAC_1 + j, InAddr);
+ }
+
+ if (!pAC->Addr.Net[0].CurrentMacAddressSet) {
+ /* Set the current logical MAC address to the permanent one. */
+ pAC->Addr.Net[0].CurrentMacAddress =
+ pAC->Addr.Net[0].PermanentMacAddress;
+ pAC->Addr.Net[0].CurrentMacAddressSet = SK_TRUE;
+ }
+
+ /* Set the current logical MAC address. */
+ pAC->Addr.Port[pAC->Addr.Net[0].ActivePort].Exact[0] =
+ pAC->Addr.Net[0].CurrentMacAddress;
+#if SK_MAX_NETS > 1
+ /* Set logical MAC address for net 2 to (log | 3). */
+ if (!pAC->Addr.Net[1].CurrentMacAddressSet) {
+ pAC->Addr.Net[1].PermanentMacAddress =
+ pAC->Addr.Net[0].PermanentMacAddress;
+ pAC->Addr.Net[1].PermanentMacAddress.a[5] |= 3;
+ /* Set the current logical MAC address to the permanent one. */
+ pAC->Addr.Net[1].CurrentMacAddress =
+ pAC->Addr.Net[1].PermanentMacAddress;
+ pAC->Addr.Net[1].CurrentMacAddressSet = SK_TRUE;
+ }
+#endif /* SK_MAX_NETS > 1 */
+
+#ifdef DEBUG
+ for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
+ ("Permanent MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n",
+ i,
+ pAC->Addr.Net[i].PermanentMacAddress.a[0],
+ pAC->Addr.Net[i].PermanentMacAddress.a[1],
+ pAC->Addr.Net[i].PermanentMacAddress.a[2],
+ pAC->Addr.Net[i].PermanentMacAddress.a[3],
+ pAC->Addr.Net[i].PermanentMacAddress.a[4],
+ pAC->Addr.Net[i].PermanentMacAddress.a[5]))
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
+ ("Logical MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n",
+ i,
+ pAC->Addr.Net[i].CurrentMacAddress.a[0],
+ pAC->Addr.Net[i].CurrentMacAddress.a[1],
+ pAC->Addr.Net[i].CurrentMacAddress.a[2],
+ pAC->Addr.Net[i].CurrentMacAddress.a[3],
+ pAC->Addr.Net[i].CurrentMacAddress.a[4],
+ pAC->Addr.Net[i].CurrentMacAddress.a[5]))
+ }
+#endif /* DEBUG */
+
+ for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
+ pAPort = &pAC->Addr.Port[i];
+
+ /* Read permanent port addresses from Control Register File. */
+ for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
+ InAddr = (SK_U8 *) &pAPort->PermanentMacAddress.a[j];
+ SK_IN8(IoC, B2_MAC_2 + 8 * i + j, InAddr);
+ }
+
+ if (!pAPort->CurrentMacAddressSet) {
+ /*
+ * Set the current and previous physical MAC address
+ * of this port to its permanent MAC address.
+ */
+ pAPort->CurrentMacAddress = pAPort->PermanentMacAddress;
+ pAPort->PreviousMacAddress = pAPort->PermanentMacAddress;
+ pAPort->CurrentMacAddressSet = SK_TRUE;
+ }
+
+ /* Set port's current physical MAC address. */
+ OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
+
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+ XM_OUTADDR(IoC, i, XM_SA, OutAddr);
+ }
+ else {
+ GM_OUTADDR(IoC, i, GM_SRC_ADDR_1L, OutAddr);
+ }
+#ifdef DEBUG
+ SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
+ ("SkAddrInit: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
+ pAPort->PermanentMacAddress.a[0],
+ pAPort->PermanentMacAddress.a[1],
+ pAPort->PermanentMacAddress.a[2],
+ pAPort->PermanentMacAddress.a[3],
+ pAPort->PermanentMacAddress.a[4],
+ pAPort->PermanentMacAddress.a[5]))
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
+ ("SkAddrInit: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
+ pAPort->CurrentMacAddress.a[0],
+ pAPort->CurrentMacAddress.a[1],
+ pAPort->CurrentMacAddress.a[2],
+ pAPort->CurrentMacAddress.a[3],
+ pAPort->CurrentMacAddress.a[4],
+ pAPort->CurrentMacAddress.a[5]))
+#endif /* DEBUG */
+ }
+ /* pAC->Addr.InitDone = SK_INIT_IO; */
+ break;
+
+ case SK_INIT_RUN:
+#ifdef xDEBUG
+ for (i = 0; i < SK_MAX_MACS; i++) {
+ if (pAC->Addr.Port[i].NextExactMatchRlmt <
+ SK_ADDR_FIRST_MATCH_RLMT) {
+ Next0[i] |= 16;
+ }
+ }
+#endif /* DEBUG */
+
+ /* pAC->Addr.InitDone = SK_INIT_RUN; */
+ break;
+
+ default: /* error */
+ break;
+ }
+
+ return (SK_ADDR_SUCCESS);
+
+} /* SkAddrInit */
+
+
+/******************************************************************************
+ *
+ * SkAddrMcClear - clear the multicast table
+ *
+ * Description:
+ * This routine clears the multicast table.
+ *
+ * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
+ * immediately.
+ *
+ * It calls either SkAddrXmacMcClear or SkAddrGmacMcClear, according
+ * to the adapter in use. The real work is done there.
+ *
+ * Context:
+ * runtime, pageable
+ * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
+ * may be called after SK_INIT_IO without limitation
+ *
+ * Returns:
+ * SK_ADDR_SUCCESS
+ * SK_ADDR_ILLEGAL_PORT
+ */
+int SkAddrMcClear(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber, /* Index of affected port */
+int Flags) /* permanent/non-perm, sw-only */
+{
+ int ReturnCode;
+
+ if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+ return (SK_ADDR_ILLEGAL_PORT);
+ }
+
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+ ReturnCode = SkAddrXmacMcClear(pAC, IoC, PortNumber, Flags);
+ }
+ else {
+ ReturnCode = SkAddrGmacMcClear(pAC, IoC, PortNumber, Flags);
+ }
+
+ return (ReturnCode);
+
+} /* SkAddrMcClear */
+
+
+/******************************************************************************
+ *
+ * SkAddrXmacMcClear - clear the multicast table
+ *
+ * Description:
+ * This routine clears the multicast table
+ * (either entry 2 or entries 3-16 and InexactFilter) of the given port.
+ * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
+ * immediately.
+ *
+ * Context:
+ * runtime, pageable
+ * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
+ * may be called after SK_INIT_IO without limitation
+ *
+ * Returns:
+ * SK_ADDR_SUCCESS
+ * SK_ADDR_ILLEGAL_PORT
+ */
+int SkAddrXmacMcClear(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber, /* Index of affected port */
+int Flags) /* permanent/non-perm, sw-only */
+{
+ int i;
+
+ if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */
+
+ /* Clear RLMT multicast addresses. */
+ pAC->Addr.Port[PortNumber].NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
+ }
+ else { /* not permanent => DRV */
+
+ /* Clear InexactFilter */
+ for (i = 0; i < 8; i++) {
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
+ }
+
+ /* Clear DRV multicast addresses. */
+
+ pAC->Addr.Port[PortNumber].NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
+ }
+
+ if (!(Flags & SK_MC_SW_ONLY)) {
+ (void) SkAddrXmacMcUpdate(pAC, IoC, PortNumber);
+ }
+
+ return (SK_ADDR_SUCCESS);
+
+} /* SkAddrXmacMcClear */
+
+
+/******************************************************************************
+ *
+ * SkAddrGmacMcClear - clear the multicast table
+ *
+ * Description:
+ * This routine clears the multicast hashing table (InexactFilter)
+ * (either the RLMT or the driver bits) of the given port.
+ *
+ * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
+ * immediately.
+ *
+ * Context:
+ * runtime, pageable
+ * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
+ * may be called after SK_INIT_IO without limitation
+ *
+ * Returns:
+ * SK_ADDR_SUCCESS
+ * SK_ADDR_ILLEGAL_PORT
+ */
+int SkAddrGmacMcClear(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber, /* Index of affected port */
+int Flags) /* permanent/non-perm, sw-only */
+{
+ int i;
+
+#ifdef DEBUG
+ SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("GMAC InexactFilter (not cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n",
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7]))
+#endif /* DEBUG */
+
+ /* Clear InexactFilter */
+ for (i = 0; i < 8; i++) {
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
+ }
+
+ if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */
+
+ /* Copy DRV bits to InexactFilter. */
+ for (i = 0; i < 8; i++) {
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
+ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i];
+
+ /* Clear InexactRlmtFilter. */
+ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i] = 0;
+
+ }
+ }
+ else { /* not permanent => DRV */
+
+ /* Copy RLMT bits to InexactFilter. */
+ for (i = 0; i < 8; i++) {
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
+ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i];
+
+ /* Clear InexactDrvFilter. */
+ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i] = 0;
+ }
+ }
+
+#ifdef DEBUG
+ SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("GMAC InexactFilter (cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n",
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6],
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7]))
+#endif /* DEBUG */
+
+ if (!(Flags & SK_MC_SW_ONLY)) {
+ (void) SkAddrGmacMcUpdate(pAC, IoC, PortNumber);
+ }
+
+ return (SK_ADDR_SUCCESS);
+
+} /* SkAddrGmacMcClear */
+
+#ifndef SK_ADDR_CHEAT
+
+/******************************************************************************
+ *
+ * SkXmacMcHash - hash multicast address
+ *
+ * Description:
+ * This routine computes the hash value for a multicast address.
+ * A CRC32 algorithm is used.
+ *
+ * Notes:
+ * The code was adapted from the XaQti data sheet.
+ *
+ * Context:
+ * runtime, pageable
+ *
+ * Returns:
+ * Hash value of multicast address.
+ */
+SK_U32 SkXmacMcHash(
+unsigned char *pMc) /* Multicast address */
+{
+ SK_U32 Idx;
+ SK_U32 Bit;
+ SK_U32 Data;
+ SK_U32 Crc;
+
+ Crc = 0xFFFFFFFFUL;
+ for (Idx = 0; Idx < SK_MAC_ADDR_LEN; Idx++) {
+ Data = *pMc++;
+ for (Bit = 0; Bit < 8; Bit++, Data >>= 1) {
+ Crc = (Crc >> 1) ^ (((Crc ^ Data) & 1) ? XMAC_POLY : 0);
+ }
+ }
+
+ return (Crc & ((1 << HASH_BITS) - 1));
+
+} /* SkXmacMcHash */
+
+
+/******************************************************************************
+ *
+ * SkGmacMcHash - hash multicast address
+ *
+ * Description:
+ * This routine computes the hash value for a multicast address.
+ * A CRC16 algorithm is used.
+ *
+ * Notes:
+ *
+ *
+ * Context:
+ * runtime, pageable
+ *
+ * Returns:
+ * Hash value of multicast address.
+ */
+SK_U32 SkGmacMcHash(
+unsigned char *pMc) /* Multicast address */
+{
+ SK_U32 Data;
+ SK_U32 TmpData;
+ SK_U32 Crc;
+ int Byte;
+ int Bit;
+
+ Crc = 0xFFFFFFFFUL;
+ for (Byte = 0; Byte < 6; Byte++) {
+ /* Get next byte. */
+ Data = (SK_U32) pMc[Byte];
+
+ /* Change bit order in byte. */
+ TmpData = Data;
+ for (Bit = 0; Bit < 8; Bit++) {
+ if (TmpData & 1L) {
+ Data |= 1L << (7 - Bit);
+ }
+ else {
+ Data &= ~(1L << (7 - Bit));
+ }
+ TmpData >>= 1;
+ }
+
+ Crc ^= (Data << 24);
+ for (Bit = 0; Bit < 8; Bit++) {
+ if (Crc & 0x80000000) {
+ Crc = (Crc << 1) ^ GMAC_POLY;
+ }
+ else {
+ Crc <<= 1;
+ }
+ }
+ }
+
+ return (Crc & ((1 << HASH_BITS) - 1));
+
+} /* SkGmacMcHash */
+
+#endif /* not SK_ADDR_CHEAT */
+
+/******************************************************************************
+ *
+ * SkAddrMcAdd - add a multicast address to a port
+ *
+ * Description:
+ * This routine enables reception for a given address on the given port.
+ *
+ * It calls either SkAddrXmacMcAdd or SkAddrGmacMcAdd, according to the
+ * adapter in use. The real work is done there.
+ *
+ * Notes:
+ * The return code is only valid for SK_PROM_MODE_NONE.
+ *
+ * Context:
+ * runtime, pageable
+ * may be called after SK_INIT_DATA
+ *
+ * Returns:
+ * SK_MC_FILTERING_EXACT
+ * SK_MC_FILTERING_INEXACT
+ * SK_MC_ILLEGAL_ADDRESS
+ * SK_MC_ILLEGAL_PORT
+ * SK_MC_RLMT_OVERFLOW
+ */
+int SkAddrMcAdd(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber, /* Port Number */
+SK_MAC_ADDR *pMc, /* multicast address to be added */
+int Flags) /* permanent/non-permanent */
+{
+ int ReturnCode;
+
+ if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+ return (SK_ADDR_ILLEGAL_PORT);
+ }
+
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+ ReturnCode = SkAddrXmacMcAdd(pAC, IoC, PortNumber, pMc, Flags);
+ }
+ else {
+ ReturnCode = SkAddrGmacMcAdd(pAC, IoC, PortNumber, pMc, Flags);
+ }
+
+ return (ReturnCode);
+
+} /* SkAddrMcAdd */
+
+
+/******************************************************************************
+ *
+ * SkAddrXmacMcAdd - add a multicast address to a port
+ *
+ * Description:
+ * This routine enables reception for a given address on the given port.
+ *
+ * Notes:
+ * The return code is only valid for SK_PROM_MODE_NONE.
+ *
+ * The multicast bit is only checked if there are no free exact match
+ * entries.
+ *
+ * Context:
+ * runtime, pageable
+ * may be called after SK_INIT_DATA
+ *
+ * Returns:
+ * SK_MC_FILTERING_EXACT
+ * SK_MC_FILTERING_INEXACT
+ * SK_MC_ILLEGAL_ADDRESS
+ * SK_MC_RLMT_OVERFLOW
+ */
+int SkAddrXmacMcAdd(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber, /* Port Number */
+SK_MAC_ADDR *pMc, /* multicast address to be added */
+int Flags) /* permanent/non-permanent */
+{
+ int i;
+ SK_U8 Inexact;
+#ifndef SK_ADDR_CHEAT
+ SK_U32 HashBit;
+#endif /* !defined(SK_ADDR_CHEAT) */
+
+ if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */
+#ifdef xDEBUG
+ if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt <
+ SK_ADDR_FIRST_MATCH_RLMT) {
+ Next0[PortNumber] |= 1;
+ return (SK_MC_RLMT_OVERFLOW);
+ }
+#endif /* DEBUG */
+
+ if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt >
+ SK_ADDR_LAST_MATCH_RLMT) {
+ return (SK_MC_RLMT_OVERFLOW);
+ }
+
+ /* Set a RLMT multicast address. */
+
+ pAC->Addr.Port[PortNumber].Exact[
+ pAC->Addr.Port[PortNumber].NextExactMatchRlmt++] = *pMc;
+
+ return (SK_MC_FILTERING_EXACT);
+ }
+
+#ifdef xDEBUG
+ if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <
+ SK_ADDR_FIRST_MATCH_DRV) {
+ Next0[PortNumber] |= 2;
+ return (SK_MC_RLMT_OVERFLOW);
+ }
+#endif /* DEBUG */
+
+ if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) {
+
+ /* Set exact match entry. */
+ pAC->Addr.Port[PortNumber].Exact[
+ pAC->Addr.Port[PortNumber].NextExactMatchDrv++] = *pMc;
+
+ /* Clear InexactFilter */
+ for (i = 0; i < 8; i++) {
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
+ }
+ }
+ else {
+ if (!(pMc->a[0] & SK_MC_BIT)) {
+ /* Hashing only possible with multicast addresses. */
+ return (SK_MC_ILLEGAL_ADDRESS);
+ }
+#ifndef SK_ADDR_CHEAT
+ /* Compute hash value of address. */
+ HashBit = 63 - SkXmacMcHash(&pMc->a[0]);
+
+ /* Add bit to InexactFilter. */
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[HashBit / 8] |=
+ 1 << (HashBit % 8);
+#else /* SK_ADDR_CHEAT */
+ /* Set all bits in InexactFilter. */
+ for (i = 0; i < 8; i++) {
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF;
+ }
+#endif /* SK_ADDR_CHEAT */
+ }
+
+ for (Inexact = 0, i = 0; i < 8; i++) {
+ Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
+ }
+
+ if (Inexact == 0 && pAC->Addr.Port[PortNumber].PromMode == 0) {
+ return (SK_MC_FILTERING_EXACT);
+ }
+ else {
+ return (SK_MC_FILTERING_INEXACT);
+ }
+
+} /* SkAddrXmacMcAdd */
+
+
+/******************************************************************************
+ *
+ * SkAddrGmacMcAdd - add a multicast address to a port
+ *
+ * Description:
+ * This routine enables reception for a given address on the given port.
+ *
+ * Notes:
+ * The return code is only valid for SK_PROM_MODE_NONE.
+ *
+ * Context:
+ * runtime, pageable
+ * may be called after SK_INIT_DATA
+ *
+ * Returns:
+ * SK_MC_FILTERING_INEXACT
+ * SK_MC_ILLEGAL_ADDRESS
+ */
+int SkAddrGmacMcAdd(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber, /* Port Number */
+SK_MAC_ADDR *pMc, /* multicast address to be added */
+int Flags) /* permanent/non-permanent */
+{
+ int i;
+#ifndef SK_ADDR_CHEAT
+ SK_U32 HashBit;
+#endif /* !defined(SK_ADDR_CHEAT) */
+
+ if (!(pMc->a[0] & SK_MC_BIT)) {
+ /* Hashing only possible with multicast addresses. */
+ return (SK_MC_ILLEGAL_ADDRESS);
+ }
+
+#ifndef SK_ADDR_CHEAT
+
+ /* Compute hash value of address. */
+ HashBit = SkGmacMcHash(&pMc->a[0]);
+
+ if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */
+
+ /* Add bit to InexactRlmtFilter. */
+ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[HashBit / 8] |=
+ 1 << (HashBit % 8);
+
+ /* Copy bit to InexactFilter. */
+ for (i = 0; i < 8; i++) {
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
+ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i];
+ }
+#ifdef DEBUG
+ SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("GMAC InexactRlmtFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n",
+ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[0],
+ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[1],
+ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[2],
+ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[3],
+ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[4],
+ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[5],
+ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[6],
+ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[7]))
+#endif /* DEBUG */
+ }
+ else { /* not permanent => DRV */
+
+ /* Add bit to InexactDrvFilter. */
+ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[HashBit / 8] |=
+ 1 << (HashBit % 8);
+
+ /* Copy bit to InexactFilter. */
+ for (i = 0; i < 8; i++) {
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
+ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i];
+ }
+#ifdef DEBUG
+ SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("GMAC InexactDrvFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n",
+ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[0],
+ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[1],
+ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[2],
+ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[3],
+ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[4],
+ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[5],
+ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[6],
+ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[7]))
+#endif /* DEBUG */
+ }
+
+#else /* SK_ADDR_CHEAT */
+
+ /* Set all bits in InexactFilter. */
+ for (i = 0; i < 8; i++) {
+ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF;
+ }
+#endif /* SK_ADDR_CHEAT */
+
+ return (SK_MC_FILTERING_INEXACT);
+
+} /* SkAddrGmacMcAdd */
+
+
+/******************************************************************************
+ *
+ * SkAddrMcUpdate - update the HW MC address table and set the MAC address
+ *
+ * Description:
+ * This routine enables reception of the addresses contained in a local
+ * table for a given port.
+ * It also programs the port's current physical MAC address.
+ *
+ * It calls either SkAddrXmacMcUpdate or SkAddrGmacMcUpdate, according
+ * to the adapter in use. The real work is done there.
+ *
+ * Notes:
+ * The return code is only valid for SK_PROM_MODE_NONE.
+ *
+ * Context:
+ * runtime, pageable
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * SK_MC_FILTERING_EXACT
+ * SK_MC_FILTERING_INEXACT
+ * SK_ADDR_ILLEGAL_PORT
+ */
+int SkAddrMcUpdate(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber) /* Port Number */
+{
+ int ReturnCode;
+
+ if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+ return (SK_ADDR_ILLEGAL_PORT);
+ }
+
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+ ReturnCode = SkAddrXmacMcUpdate(pAC, IoC, PortNumber);
+ }
+ else {
+ ReturnCode = SkAddrGmacMcUpdate(pAC, IoC, PortNumber);
+ }
+
+ return (ReturnCode);
+
+} /* SkAddrMcUpdate */
+
+
+/******************************************************************************
+ *
+ * SkAddrXmacMcUpdate - update the HW MC address table and set the MAC address
+ *
+ * Description:
+ * This routine enables reception of the addresses contained in a local
+ * table for a given port.
+ * It also programs the port's current physical MAC address.
+ *
+ * Notes:
+ * The return code is only valid for SK_PROM_MODE_NONE.
+ *
+ * Context:
+ * runtime, pageable
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * SK_MC_FILTERING_EXACT
+ * SK_MC_FILTERING_INEXACT
+ * SK_ADDR_ILLEGAL_PORT
+ */
+int SkAddrXmacMcUpdate(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber) /* Port Number */
+{
+ SK_U32 i;
+ SK_U8 Inexact;
+ SK_U16 *OutAddr;
+ SK_ADDR_PORT *pAPort;
+
+ SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("SkAddrXmacMcUpdate on Port %u.\n", PortNumber))
+
+ pAPort = &pAC->Addr.Port[PortNumber];
+
+#ifdef DEBUG
+ SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber]))
+#endif /* DEBUG */
+
+ /* Start with 0 to also program the logical MAC address. */
+ for (i = 0; i < pAPort->NextExactMatchRlmt; i++) {
+ /* Set exact match address i on XMAC */
+ OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0];
+ XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr);
+ }
+
+ /* Clear other permanent exact match addresses on XMAC */
+ if (pAPort->NextExactMatchRlmt <= SK_ADDR_LAST_MATCH_RLMT) {
+
+ SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchRlmt,
+ SK_ADDR_LAST_MATCH_RLMT);
+ }
+
+ for (i = pAPort->FirstExactMatchDrv; i < pAPort->NextExactMatchDrv; i++) {
+ OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0];
+ XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr);
+ }
+
+ /* Clear other non-permanent exact match addresses on XMAC */
+ if (pAPort->NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) {
+
+ SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchDrv,
+ SK_ADDR_LAST_MATCH_DRV);
+ }
+
+ for (Inexact = 0, i = 0; i < 8; i++) {
+ Inexact |= pAPort->InexactFilter.Bytes[i];
+ }
+
+ if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) {
+
+ /* Set all bits in 64-bit hash register. */
+ XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash);
+
+ /* Enable Hashing */
+ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE);
+ }
+ else if (Inexact != 0) {
+
+ /* Set 64-bit hash register to InexactFilter. */
+ XM_OUTHASH(IoC, PortNumber, XM_HSM, &pAPort->InexactFilter.Bytes[0]);
+
+ /* Enable Hashing */
+ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE);
+ }
+ else {
+ /* Disable Hashing */
+ SkMacHashing(pAC, IoC, PortNumber, SK_FALSE);
+ }
+
+ if (pAPort->PromMode != SK_PROM_MODE_NONE) {
+ (void) SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
+ }
+
+ /* Set port's current physical MAC address. */
+ OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
+
+ XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr);
+
+#ifdef xDEBUG
+ for (i = 0; i < pAPort->NextExactMatchRlmt; i++) {
+ SK_U8 InAddr8[6];
+ SK_U16 *InAddr;
+
+ /* Get exact match address i from port PortNumber. */
+ InAddr = (SK_U16 *) &InAddr8[0];
+
+ XM_INADDR(IoC, PortNumber, XM_EXM(i), InAddr);
+
+ SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("SkAddrXmacMcUpdate: MC address %d on Port %u: ",
+ "%02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x\n",
+ i,
+ PortNumber,
+ InAddr8[0],
+ InAddr8[1],
+ InAddr8[2],
+ InAddr8[3],
+ InAddr8[4],
+ InAddr8[5],
+ pAPort->Exact[i].a[0],
+ pAPort->Exact[i].a[1],
+ pAPort->Exact[i].a[2],
+ pAPort->Exact[i].a[3],
+ pAPort->Exact[i].a[4],
+ pAPort->Exact[i].a[5]))
+ }
+#endif /* DEBUG */
+
+ /* Determine return value. */
+ if (Inexact == 0 && pAPort->PromMode == 0) {
+ return (SK_MC_FILTERING_EXACT);
+ }
+ else {
+ return (SK_MC_FILTERING_INEXACT);
+ }
+
+} /* SkAddrXmacMcUpdate */
+
+
+/******************************************************************************
+ *
+ * SkAddrGmacMcUpdate - update the HW MC address table and set the MAC address
+ *
+ * Description:
+ * This routine enables reception of the addresses contained in a local
+ * table for a given port.
+ * It also programs the port's current physical MAC address.
+ *
+ * Notes:
+ * The return code is only valid for SK_PROM_MODE_NONE.
+ *
+ * Context:
+ * runtime, pageable
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * SK_MC_FILTERING_EXACT
+ * SK_MC_FILTERING_INEXACT
+ * SK_ADDR_ILLEGAL_PORT
+ */
+int SkAddrGmacMcUpdate(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber) /* Port Number */
+{
+ SK_U32 i;
+ SK_U8 Inexact;
+ SK_U16 *OutAddr;
+ SK_ADDR_PORT *pAPort;
+
+ SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("SkAddrGmacMcUpdate on Port %u.\n", PortNumber))
+
+ pAPort = &pAC->Addr.Port[PortNumber];
+
+#ifdef DEBUG
+ SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber]))
+#endif /* DEBUG */
+
+ for (Inexact = 0, i = 0; i < 8; i++) {
+ Inexact |= pAPort->InexactFilter.Bytes[i];
+ }
+
+ /* Set 64-bit hash register to InexactFilter. */
+ GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1,
+ &pAPort->InexactFilter.Bytes[0]);
+
+ if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) {
+
+ /* Set all bits in 64-bit hash register. */
+ GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
+
+ /* Enable Hashing */
+ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE);
+ }
+ else {
+ /* Enable Hashing. */
+ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE);
+ }
+
+ if (pAPort->PromMode != SK_PROM_MODE_NONE) {
+ (void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
+ }
+
+ /* Set port's current physical MAC address. */
+ OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
+ GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr);
+
+ /* Set port's current logical MAC address. */
+ OutAddr = (SK_U16 *) &pAPort->Exact[0].a[0];
+ GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_2L, OutAddr);
+
+#ifdef DEBUG
+ SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("SkAddrGmacMcUpdate: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
+ pAPort->Exact[0].a[0],
+ pAPort->Exact[0].a[1],
+ pAPort->Exact[0].a[2],
+ pAPort->Exact[0].a[3],
+ pAPort->Exact[0].a[4],
+ pAPort->Exact[0].a[5]))
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("SkAddrGmacMcUpdate: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
+ pAPort->CurrentMacAddress.a[0],
+ pAPort->CurrentMacAddress.a[1],
+ pAPort->CurrentMacAddress.a[2],
+ pAPort->CurrentMacAddress.a[3],
+ pAPort->CurrentMacAddress.a[4],
+ pAPort->CurrentMacAddress.a[5]))
+#endif /* DEBUG */
+
+ /* Determine return value. */
+ if (Inexact == 0 && pAPort->PromMode == 0) {
+ return (SK_MC_FILTERING_EXACT);
+ }
+ else {
+ return (SK_MC_FILTERING_INEXACT);
+ }
+
+} /* SkAddrGmacMcUpdate */
+
+
+/******************************************************************************
+ *
+ * SkAddrOverride - override a port's MAC address
+ *
+ * Description:
+ * This routine overrides the MAC address of one port.
+ *
+ * Context:
+ * runtime, pageable
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * SK_ADDR_SUCCESS if successful.
+ * SK_ADDR_DUPLICATE_ADDRESS if duplicate MAC address.
+ * SK_ADDR_MULTICAST_ADDRESS if multicast or broadcast address.
+ * SK_ADDR_TOO_EARLY if SK_INIT_IO was not executed before.
+ */
+int SkAddrOverride(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber, /* Port Number */
+SK_MAC_ADDR *pNewAddr, /* new MAC address */
+int Flags) /* logical/physical MAC address */
+{
+ SK_EVPARA Para;
+ SK_U32 NetNumber;
+ SK_U32 i;
+ SK_U16 *OutAddr;
+
+ NetNumber = pAC->Rlmt.Port[PortNumber].Net->NetNumber;
+
+ if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+ return (SK_ADDR_ILLEGAL_PORT);
+ }
+
+ if (pNewAddr != NULL && (pNewAddr->a[0] & SK_MC_BIT) != 0) {
+ return (SK_ADDR_MULTICAST_ADDRESS);
+ }
+
+ if (!pAC->Addr.Net[NetNumber].CurrentMacAddressSet) {
+ return (SK_ADDR_TOO_EARLY);
+ }
+
+ if (Flags & SK_ADDR_SET_LOGICAL) { /* Activate logical MAC address. */
+ /* Parameter *pNewAddr is ignored. */
+ for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
+ if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
+ return (SK_ADDR_TOO_EARLY);
+ }
+ }
+
+ /* Set PortNumber to number of net's active port. */
+ PortNumber = pAC->Rlmt.Net[NetNumber].
+ Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
+
+ pAC->Addr.Port[PortNumber].Exact[0] =
+ pAC->Addr.Net[NetNumber].CurrentMacAddress;
+
+ /* Write address to first exact match entry of active port. */
+ (void) SkAddrMcUpdate(pAC, IoC, PortNumber);
+ }
+ else if (Flags & SK_ADDR_CLEAR_LOGICAL) {
+ /* Deactivate logical MAC address. */
+ /* Parameter *pNewAddr is ignored. */
+ for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
+ if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
+ return (SK_ADDR_TOO_EARLY);
+ }
+ }
+
+ /* Set PortNumber to number of net's active port. */
+ PortNumber = pAC->Rlmt.Net[NetNumber].
+ Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
+
+ for (i = 0; i < SK_MAC_ADDR_LEN; i++ ) {
+ pAC->Addr.Port[PortNumber].Exact[0].a[i] = 0;
+ }
+
+ /* Write address to first exact match entry of active port. */
+ (void) SkAddrMcUpdate(pAC, IoC, PortNumber);
+ }
+ else if (Flags & SK_ADDR_PHYSICAL_ADDRESS) { /* Physical MAC address. */
+ if (SK_ADDR_EQUAL(pNewAddr->a,
+ pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) {
+ return (SK_ADDR_DUPLICATE_ADDRESS);
+ }
+
+ for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
+ if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
+ return (SK_ADDR_TOO_EARLY);
+ }
+
+ if (SK_ADDR_EQUAL(pNewAddr->a,
+ pAC->Addr.Port[i].CurrentMacAddress.a)) {
+ if (i == PortNumber) {
+ return (SK_ADDR_SUCCESS);
+ }
+ else {
+ return (SK_ADDR_DUPLICATE_ADDRESS);
+ }
+ }
+ }
+
+ pAC->Addr.Port[PortNumber].PreviousMacAddress =
+ pAC->Addr.Port[PortNumber].CurrentMacAddress;
+ pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr;
+
+ /* Change port's physical MAC address. */
+ OutAddr = (SK_U16 *) pNewAddr;
+
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+ XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr);
+ }
+ else {
+ GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr);
+ }
+
+ /* Report address change to RLMT. */
+ Para.Para32[0] = PortNumber;
+ Para.Para32[0] = -1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para);
+ }
+ else { /* Logical MAC address. */
+ if (SK_ADDR_EQUAL(pNewAddr->a,
+ pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) {
+ return (SK_ADDR_SUCCESS);
+ }
+
+ for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
+ if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
+ return (SK_ADDR_TOO_EARLY);
+ }
+
+ if (SK_ADDR_EQUAL(pNewAddr->a,
+ pAC->Addr.Port[i].CurrentMacAddress.a)) {
+ return (SK_ADDR_DUPLICATE_ADDRESS);
+ }
+ }
+
+ /*
+ * In case that the physical and the logical MAC addresses are equal
+ * we must also change the physical MAC address here.
+ * In this case we have an adapter which initially was programmed with
+ * two identical MAC addresses.
+ */
+ if (SK_ADDR_EQUAL(pAC->Addr.Port[PortNumber].CurrentMacAddress.a,
+ pAC->Addr.Port[PortNumber].Exact[0].a)) {
+
+ pAC->Addr.Port[PortNumber].PreviousMacAddress =
+ pAC->Addr.Port[PortNumber].CurrentMacAddress;
+ pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr;
+
+ /* Report address change to RLMT. */
+ Para.Para32[0] = PortNumber;
+ Para.Para32[0] = -1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para);
+ }
+
+ /* Set PortNumber to number of net's active port. */
+ PortNumber = pAC->Rlmt.Net[NetNumber].
+ Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
+
+ pAC->Addr.Net[NetNumber].CurrentMacAddress = *pNewAddr;
+ pAC->Addr.Port[PortNumber].Exact[0] = *pNewAddr;
+#ifdef DEBUG
+ SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("SkAddrOverride: Permanent MAC Address: %02X %02X %02X %02X %02X %02X\n",
+ pAC->Addr.Net[NetNumber].PermanentMacAddress.a[0],
+ pAC->Addr.Net[NetNumber].PermanentMacAddress.a[1],
+ pAC->Addr.Net[NetNumber].PermanentMacAddress.a[2],
+ pAC->Addr.Net[NetNumber].PermanentMacAddress.a[3],
+ pAC->Addr.Net[NetNumber].PermanentMacAddress.a[4],
+ pAC->Addr.Net[NetNumber].PermanentMacAddress.a[5]))
+
+ SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+ ("SkAddrOverride: New logical MAC Address: %02X %02X %02X %02X %02X %02X\n",
+ pAC->Addr.Net[NetNumber].CurrentMacAddress.a[0],
+ pAC->Addr.Net[NetNumber].CurrentMacAddress.a[1],
+ pAC->Addr.Net[NetNumber].CurrentMacAddress.a[2],
+ pAC->Addr.Net[NetNumber].CurrentMacAddress.a[3],
+ pAC->Addr.Net[NetNumber].CurrentMacAddress.a[4],
+ pAC->Addr.Net[NetNumber].CurrentMacAddress.a[5]))
+#endif /* DEBUG */
+
+ /* Write address to first exact match entry of active port. */
+ (void) SkAddrMcUpdate(pAC, IoC, PortNumber);
+ }
+
+ return (SK_ADDR_SUCCESS);
+
+} /* SkAddrOverride */
+
+
+/******************************************************************************
+ *
+ * SkAddrPromiscuousChange - set promiscuous mode for given port
+ *
+ * Description:
+ * This routine manages promiscuous mode:
+ * - none
+ * - all LLC frames
+ * - all MC frames
+ *
+ * It calls either SkAddrXmacPromiscuousChange or
+ * SkAddrGmacPromiscuousChange, according to the adapter in use.
+ * The real work is done there.
+ *
+ * Context:
+ * runtime, pageable
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * SK_ADDR_SUCCESS
+ * SK_ADDR_ILLEGAL_PORT
+ */
+int SkAddrPromiscuousChange(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber, /* port whose promiscuous mode changes */
+int NewPromMode) /* new promiscuous mode */
+{
+ int ReturnCode;
+
+ if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+ return (SK_ADDR_ILLEGAL_PORT);
+ }
+
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+ ReturnCode = SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode);
+ }
+ else {
+ ReturnCode = SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode);
+ }
+
+ return (ReturnCode);
+
+} /* SkAddrPromiscuousChange */
+
+
+/******************************************************************************
+ *
+ * SkAddrXmacPromiscuousChange - set promiscuous mode for given port
+ *
+ * Description:
+ * This routine manages promiscuous mode:
+ * - none
+ * - all LLC frames
+ * - all MC frames
+ *
+ * Context:
+ * runtime, pageable
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * SK_ADDR_SUCCESS
+ * SK_ADDR_ILLEGAL_PORT
+ */
+int SkAddrXmacPromiscuousChange(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber, /* port whose promiscuous mode changes */
+int NewPromMode) /* new promiscuous mode */
+{
+ int i;
+ SK_BOOL InexactModeBit;
+ SK_U8 Inexact;
+ SK_U8 HwInexact;
+ SK_FILTER64 HwInexactFilter;
+ SK_U16 LoMode; /* Lower 16 bits of XMAC Mode Register. */
+ int CurPromMode = SK_PROM_MODE_NONE;
+
+ /* Read CurPromMode from Hardware. */
+ XM_IN16(IoC, PortNumber, XM_MODE, &LoMode);
+
+ if ((LoMode & XM_MD_ENA_PROM) != 0) {
+ /* Promiscuous mode! */
+ CurPromMode |= SK_PROM_MODE_LLC;
+ }
+
+ for (Inexact = 0xFF, i = 0; i < 8; i++) {
+ Inexact &= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
+ }
+ if (Inexact == 0xFF) {
+ CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC);
+ }
+ else {
+ /* Get InexactModeBit (bit XM_MD_ENA_HASH in mode register) */
+ XM_IN16(IoC, PortNumber, XM_MODE, &LoMode);
+
+ InexactModeBit = (LoMode & XM_MD_ENA_HASH) != 0;
+
+ /* Read 64-bit hash register from XMAC */
+ XM_INHASH(IoC, PortNumber, XM_HSM, &HwInexactFilter.Bytes[0]);
+
+ for (HwInexact = 0xFF, i = 0; i < 8; i++) {
+ HwInexact &= HwInexactFilter.Bytes[i];
+ }
+
+ if (InexactModeBit && (HwInexact == 0xFF)) {
+ CurPromMode |= SK_PROM_MODE_ALL_MC;
+ }
+ }
+
+ pAC->Addr.Port[PortNumber].PromMode = NewPromMode;
+
+ if (NewPromMode == CurPromMode) {
+ return (SK_ADDR_SUCCESS);
+ }
+
+ if ((NewPromMode & SK_PROM_MODE_ALL_MC) &&
+ !(CurPromMode & SK_PROM_MODE_ALL_MC)) { /* All MC. */
+
+ /* Set all bits in 64-bit hash register. */
+ XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash);
+
+ /* Enable Hashing */
+ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE);
+ }
+ else if ((CurPromMode & SK_PROM_MODE_ALL_MC) &&
+ !(NewPromMode & SK_PROM_MODE_ALL_MC)) { /* Norm MC. */
+ for (Inexact = 0, i = 0; i < 8; i++) {
+ Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
+ }
+ if (Inexact == 0) {
+ /* Disable Hashing */
+ SkMacHashing(pAC, IoC, PortNumber, SK_FALSE);
+ }
+ else {
+ /* Set 64-bit hash register to InexactFilter. */
+ XM_OUTHASH(IoC, PortNumber, XM_HSM,
+ &pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]);
+
+ /* Enable Hashing */
+ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE);
+ }
+ }
+
+ if ((NewPromMode & SK_PROM_MODE_LLC) &&
+ !(CurPromMode & SK_PROM_MODE_LLC)) { /* Prom. LLC */
+ /* Set the MAC in Promiscuous Mode */
+ SkMacPromiscMode(pAC, IoC, PortNumber, SK_TRUE);
+ }
+ else if ((CurPromMode & SK_PROM_MODE_LLC) &&
+ !(NewPromMode & SK_PROM_MODE_LLC)) { /* Norm. LLC. */
+ /* Clear Promiscuous Mode */
+ SkMacPromiscMode(pAC, IoC, PortNumber, SK_FALSE);
+ }
+
+ return (SK_ADDR_SUCCESS);
+
+} /* SkAddrXmacPromiscuousChange */
+
+
+/******************************************************************************
+ *
+ * SkAddrGmacPromiscuousChange - set promiscuous mode for given port
+ *
+ * Description:
+ * This routine manages promiscuous mode:
+ * - none
+ * - all LLC frames
+ * - all MC frames
+ *
+ * Context:
+ * runtime, pageable
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * SK_ADDR_SUCCESS
+ * SK_ADDR_ILLEGAL_PORT
+ */
+int SkAddrGmacPromiscuousChange(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 PortNumber, /* port whose promiscuous mode changes */
+int NewPromMode) /* new promiscuous mode */
+{
+ SK_U16 ReceiveControl; /* GMAC Receive Control Register */
+ int CurPromMode = SK_PROM_MODE_NONE;
+
+ /* Read CurPromMode from Hardware. */
+ GM_IN16(IoC, PortNumber, GM_RX_CTRL, &ReceiveControl);
+
+ if ((ReceiveControl & (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA)) == 0) {
+ /* Promiscuous mode! */
+ CurPromMode |= SK_PROM_MODE_LLC;
+ }
+
+ if ((ReceiveControl & GM_RXCR_MCF_ENA) == 0) {
+ /* All Multicast mode! */
+ CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC);
+ }
+
+ pAC->Addr.Port[PortNumber].PromMode = NewPromMode;
+
+ if (NewPromMode == CurPromMode) {
+ return (SK_ADDR_SUCCESS);
+ }
+
+ if ((NewPromMode & SK_PROM_MODE_ALL_MC) &&
+ !(CurPromMode & SK_PROM_MODE_ALL_MC)) { /* All MC */
+
+ /* Set all bits in 64-bit hash register. */
+ GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
+
+ /* Enable Hashing */
+ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE);
+ }
+
+ if ((CurPromMode & SK_PROM_MODE_ALL_MC) &&
+ !(NewPromMode & SK_PROM_MODE_ALL_MC)) { /* Norm. MC */
+
+ /* Set 64-bit hash register to InexactFilter. */
+ GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1,
+ &pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]);
+
+ /* Enable Hashing. */
+ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE);
+ }
+
+ if ((NewPromMode & SK_PROM_MODE_LLC) &&
+ !(CurPromMode & SK_PROM_MODE_LLC)) { /* Prom. LLC */
+
+ /* Set the MAC to Promiscuous Mode. */
+ SkMacPromiscMode(pAC, IoC, PortNumber, SK_TRUE);
+ }
+ else if ((CurPromMode & SK_PROM_MODE_LLC) &&
+ !(NewPromMode & SK_PROM_MODE_LLC)) { /* Norm. LLC */
+
+ /* Clear Promiscuous Mode. */
+ SkMacPromiscMode(pAC, IoC, PortNumber, SK_FALSE);
+ }
+
+ return (SK_ADDR_SUCCESS);
+
+} /* SkAddrGmacPromiscuousChange */
+
+
+/******************************************************************************
+ *
+ * SkAddrSwap - swap address info
+ *
+ * Description:
+ * This routine swaps address info of two ports.
+ *
+ * Context:
+ * runtime, pageable
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * SK_ADDR_SUCCESS
+ * SK_ADDR_ILLEGAL_PORT
+ */
+int SkAddrSwap(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+SK_U32 FromPortNumber, /* Port1 Index */
+SK_U32 ToPortNumber) /* Port2 Index */
+{
+ int i;
+ SK_U8 Byte;
+ SK_MAC_ADDR MacAddr;
+ SK_U32 DWord;
+
+ if (FromPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+ return (SK_ADDR_ILLEGAL_PORT);
+ }
+
+ if (ToPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+ return (SK_ADDR_ILLEGAL_PORT);
+ }
+
+ if (pAC->Rlmt.Port[FromPortNumber].Net != pAC->Rlmt.Port[ToPortNumber].Net) {
+ return (SK_ADDR_ILLEGAL_PORT);
+ }
+
+ /*
+ * Swap:
+ * - Exact Match Entries (GEnesis and Yukon)
+ * Yukon uses first entry for the logical MAC
+ * address (stored in the second GMAC register).
+ * - FirstExactMatchRlmt (GEnesis only)
+ * - NextExactMatchRlmt (GEnesis only)
+ * - FirstExactMatchDrv (GEnesis only)
+ * - NextExactMatchDrv (GEnesis only)
+ * - 64-bit filter (InexactFilter)
+ * - Promiscuous Mode
+ * of ports.
+ */
+
+ for (i = 0; i < SK_ADDR_EXACT_MATCHES; i++) {
+ MacAddr = pAC->Addr.Port[FromPortNumber].Exact[i];
+ pAC->Addr.Port[FromPortNumber].Exact[i] =
+ pAC->Addr.Port[ToPortNumber].Exact[i];
+ pAC->Addr.Port[ToPortNumber].Exact[i] = MacAddr;
+ }
+
+ for (i = 0; i < 8; i++) {
+ Byte = pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i];
+ pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i] =
+ pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i];
+ pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i] = Byte;
+ }
+
+ i = pAC->Addr.Port[FromPortNumber].PromMode;
+ pAC->Addr.Port[FromPortNumber].PromMode = pAC->Addr.Port[ToPortNumber].PromMode;
+ pAC->Addr.Port[ToPortNumber].PromMode = i;
+
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+ DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt;
+ pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt =
+ pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt;
+ pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt = DWord;
+
+ DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt;
+ pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt =
+ pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt;
+ pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt = DWord;
+
+ DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv;
+ pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv =
+ pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv;
+ pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv = DWord;
+
+ DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchDrv;
+ pAC->Addr.Port[FromPortNumber].NextExactMatchDrv =
+ pAC->Addr.Port[ToPortNumber].NextExactMatchDrv;
+ pAC->Addr.Port[ToPortNumber].NextExactMatchDrv = DWord;
+ }
+
+ /* CAUTION: Solution works if only ports of one adapter are in use. */
+ for (i = 0; (SK_U32) i < pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].
+ Net->NetNumber].NumPorts; i++) {
+ if (pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber].
+ Port[i]->PortNumber == ToPortNumber) {
+ pAC->Addr.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber].
+ ActivePort = i;
+ /* 20001207 RA: Was "ToPortNumber;". */
+ }
+ }
+
+ (void) SkAddrMcUpdate(pAC, IoC, FromPortNumber);
+ (void) SkAddrMcUpdate(pAC, IoC, ToPortNumber);
+
+ return (SK_ADDR_SUCCESS);
+
+} /* SkAddrSwap */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/sk98lin/skcsum.c b/drivers/net/sk98lin/skcsum.c
new file mode 100644
index 0000000..a5dc572
--- /dev/null
+++ b/drivers/net/sk98lin/skcsum.c
@@ -0,0 +1,929 @@
+/******************************************************************************
+ *
+ * Name: skcsum.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.10 $
+ * Date: $Date: 2002/04/11 10:02:04 $
+ * Purpose: Store/verify Internet checksum in send/receive packets.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skcsum.c,v $
+ * Revision 1.10 2002/04/11 10:02:04 rwahl
+ * Fix in SkCsGetSendInfo():
+ * - function did not return ProtocolFlags in every case.
+ * - pseudo header csum calculated wrong for big endian.
+ *
+ * Revision 1.9 2001/06/13 07:42:08 gklug
+ * fix: NetNumber was wrong in CLEAR_STAT event
+ * add: check for good NetNumber in Clear STAT
+ *
+ * Revision 1.8 2001/02/06 11:15:36 rassmann
+ * Supporting two nets on dual-port adapters.
+ *
+ * Revision 1.7 2000/06/29 13:17:05 rassmann
+ * Corrected reception of a packet with UDP checksum == 0 (which means there
+ * is no UDP checksum).
+ *
+ * Revision 1.6 2000/02/21 12:35:10 cgoos
+ * Fixed license header comment.
+ *
+ * Revision 1.5 2000/02/21 11:05:19 cgoos
+ * Merged changes back to common source.
+ * Fixed rx path for BIG ENDIAN architecture.
+ *
+ * Revision 1.1 1999/07/26 15:28:12 mkarl
+ * added return SKCS_STATUS_IP_CSUM_ERROR_UDP and
+ * SKCS_STATUS_IP_CSUM_ERROR_TCP to pass the NidsTester
+ * changed from common source to windows specific source
+ * therefore restarting with v1.0
+ *
+ * Revision 1.3 1999/05/10 08:39:33 mkarl
+ * prevent overflows in SKCS_HTON16
+ * fixed a bug in pseudo header checksum calculation
+ * added some comments
+ *
+ * Revision 1.2 1998/10/22 11:53:28 swolf
+ * Now using SK_DBG_MSG.
+ *
+ * Revision 1.1 1998/09/01 15:35:41 swolf
+ * initial revision
+ *
+ * 13-May-1998 sw Created.
+ *
+ ******************************************************************************/
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+#ifdef SK_USE_CSUM /* Check if CSUM is to be used. */
+
+#ifndef lint
+static const char SysKonnectFileId[] = "@(#)"
+ "$Id: skcsum.c,v 1.10 2002/04/11 10:02:04 rwahl Exp $"
+ " (C) SysKonnect.";
+#endif /* !lint */
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the "GEnesis" common module "CSUM".
+ *
+ * This module contains the code necessary to calculate, store, and verify the
+ * Internet Checksum of IP, TCP, and UDP frames.
+ *
+ * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon"
+ * and is the code name of this SysKonnect project.
+ *
+ * Compilation Options:
+ *
+ * SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an
+ * empty module.
+ *
+ * SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id
+ * definitions. In this case, all SKCS_PROTO_xxx definitions must be made
+ * external.
+ *
+ * SKCS_OVERWRITE_STATUS - Define to overwrite the default return status
+ * definitions. In this case, all SKCS_STATUS_xxx definitions must be made
+ * external.
+ *
+ * Include File Hierarchy:
+ *
+ * "h/skdrv1st.h"
+ * "h/skcsum.h"
+ * "h/sktypes.h"
+ * "h/skqueue.h"
+ * "h/skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#include "h/skdrv1st.h"
+#include "h/skcsum.h"
+#include "h/skdrv2nd.h"
+
+/* defines ********************************************************************/
+
+/* The size of an Ethernet MAC header. */
+#define SKCS_ETHERNET_MAC_HEADER_SIZE (6+6+2)
+
+/* The size of the used topology's MAC header. */
+#define SKCS_MAC_HEADER_SIZE SKCS_ETHERNET_MAC_HEADER_SIZE
+
+/* The size of the IP header without any option fields. */
+#define SKCS_IP_HEADER_SIZE 20
+
+/*
+ * Field offsets within the IP header.
+ */
+
+/* "Internet Header Version" and "Length". */
+#define SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH 0
+
+/* "Total Length". */
+#define SKCS_OFS_IP_TOTAL_LENGTH 2
+
+/* "Flags" "Fragment Offset". */
+#define SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET 6
+
+/* "Next Level Protocol" identifier. */
+#define SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL 9
+
+/* Source IP address. */
+#define SKCS_OFS_IP_SOURCE_ADDRESS 12
+
+/* Destination IP address. */
+#define SKCS_OFS_IP_DESTINATION_ADDRESS 16
+
+
+/*
+ * Field offsets within the UDP header.
+ */
+
+/* UDP checksum. */
+#define SKCS_OFS_UDP_CHECKSUM 6
+
+/* IP "Next Level Protocol" identifiers (see RFC 790). */
+#define SKCS_PROTO_ID_TCP 6 /* Transport Control Protocol */
+#define SKCS_PROTO_ID_UDP 17 /* User Datagram Protocol */
+
+/* IP "Don't Fragment" bit. */
+#define SKCS_IP_DONT_FRAGMENT SKCS_HTON16(0x4000)
+
+/* Add a byte offset to a pointer. */
+#define SKCS_IDX(pPtr, Ofs) ((void *) ((char *) (pPtr) + (Ofs)))
+
+/*
+ * Macros that convert host to network representation and vice versa, i.e.
+ * little/big endian conversion on little endian machines only.
+ */
+#ifdef SK_LITTLE_ENDIAN
+#define SKCS_HTON16(Val16) (((unsigned) (Val16) >> 8) | (((Val16) & 0xFF) << 8))
+#endif /* SK_LITTLE_ENDIAN */
+#ifdef SK_BIG_ENDIAN
+#define SKCS_HTON16(Val16) (Val16)
+#endif /* SK_BIG_ENDIAN */
+#define SKCS_NTOH16(Val16) SKCS_HTON16(Val16)
+
+/* typedefs *******************************************************************/
+
+/* function prototypes ********************************************************/
+
+/******************************************************************************
+ *
+ * SkCsGetSendInfo - get checksum information for a send packet
+ *
+ * Description:
+ * Get all checksum information necessary to send a TCP or UDP packet. The
+ * function checks the IP header passed to it. If the high-level protocol
+ * is either TCP or UDP the pseudo header checksum is calculated and
+ * returned.
+ *
+ * The function returns the total length of the IP header (including any
+ * IP option fields), which is the same as the start offset of the IP data
+ * which in turn is the start offset of the TCP or UDP header.
+ *
+ * The function also returns the TCP or UDP pseudo header checksum, which
+ * should be used as the start value for the hardware checksum calculation.
+ * (Note that any actual pseudo header checksum can never calculate to
+ * zero.)
+ *
+ * Note:
+ * There is a bug in the ASIC which may lead to wrong checksums.
+ *
+ * Arguments:
+ * pAc - A pointer to the adapter context struct.
+ *
+ * pIpHeader - Pointer to IP header. Must be at least the IP header *not*
+ * including any option fields, i.e. at least 20 bytes.
+ *
+ * Note: This pointer will be used to address 8-, 16-, and 32-bit
+ * variables with the respective alignment offsets relative to the pointer.
+ * Thus, the pointer should point to a 32-bit aligned address. If the
+ * target system cannot address 32-bit variables on non 32-bit aligned
+ * addresses, then the pointer *must* point to a 32-bit aligned address.
+ *
+ * pPacketInfo - A pointer to the packet information structure for this
+ * packet. Before calling this SkCsGetSendInfo(), the following field must
+ * be initialized:
+ *
+ * ProtocolFlags - Initialize with any combination of
+ * SKCS_PROTO_XXX bit flags. SkCsGetSendInfo() will only work on
+ * the protocols specified here. Any protocol(s) not specified
+ * here will be ignored.
+ *
+ * Note: Only one checksum can be calculated in hardware. Thus, if
+ * SKCS_PROTO_IP is specified in the 'ProtocolFlags',
+ * SkCsGetSendInfo() must calculate the IP header checksum in
+ * software. It might be a better idea to have the calling
+ * protocol stack calculate the IP header checksum.
+ *
+ * Returns: N/A
+ * On return, the following fields in 'pPacketInfo' may or may not have
+ * been filled with information, depending on the protocol(s) found in the
+ * packet:
+ *
+ * ProtocolFlags - Returns the SKCS_PROTO_XXX bit flags of the protocol(s)
+ * that were both requested by the caller and actually found in the packet.
+ * Protocol(s) not specified by the caller and/or not found in the packet
+ * will have their respective SKCS_PROTO_XXX bit flags reset.
+ *
+ * Note: For IP fragments, TCP and UDP packet information is ignored.
+ *
+ * IpHeaderLength - The total length in bytes of the complete IP header
+ * including any option fields is returned here. This is the start offset
+ * of the IP data, i.e. the TCP or UDP header if present.
+ *
+ * IpHeaderChecksum - If IP has been specified in the 'ProtocolFlags', the
+ * 16-bit Internet Checksum of the IP header is returned here. This value
+ * is to be stored into the packet's 'IP Header Checksum' field.
+ *
+ * PseudoHeaderChecksum - If this is a TCP or UDP packet and if TCP or UDP
+ * has been specified in the 'ProtocolFlags', the 16-bit Internet Checksum
+ * of the TCP or UDP pseudo header is returned here.
+ */
+#if 0
+void SkCsGetSendInfo(
+SK_AC *pAc, /* Adapter context struct. */
+void *pIpHeader, /* IP header. */
+SKCS_PACKET_INFO *pPacketInfo, /* Packet information struct. */
+int NetNumber) /* Net number */
+{
+ /* Internet Header Version found in IP header. */
+ unsigned InternetHeaderVersion;
+
+ /* Length of the IP header as found in IP header. */
+ unsigned IpHeaderLength;
+
+ /* Bit field specifiying the desired/found protocols. */
+ unsigned ProtocolFlags;
+
+ /* Next level protocol identifier found in IP header. */
+ unsigned NextLevelProtocol;
+
+ /* Length of IP data portion. */
+ unsigned IpDataLength;
+
+ /* TCP/UDP pseudo header checksum. */
+ unsigned long PseudoHeaderChecksum;
+
+ /* Pointer to next level protocol statistics structure. */
+ SKCS_PROTO_STATS *NextLevelProtoStats;
+
+ /* Temporary variable. */
+ unsigned Tmp;
+
+ Tmp = *(SK_U8 *)
+ SKCS_IDX(pIpHeader, SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH);
+
+ /* Get the Internet Header Version (IHV). */
+ /* Note: The IHV is stored in the upper four bits. */
+
+ InternetHeaderVersion = Tmp >> 4;
+
+ /* Check the Internet Header Version. */
+ /* Note: We currently only support IP version 4. */
+
+ if (InternetHeaderVersion != 4) { /* IPv4? */
+ SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_TX,
+ ("Tx: Unknown Internet Header Version %u.\n",
+ InternetHeaderVersion));
+ pPacketInfo->ProtocolFlags = 0;
+ pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxUnableCts++;
+ return;
+ }
+
+ /* Get the IP header length (IHL). */
+ /*
+ * Note: The IHL is stored in the lower four bits as the number of
+ * 4-byte words.
+ */
+
+ IpHeaderLength = (Tmp & 0xf) * 4;
+ pPacketInfo->IpHeaderLength = IpHeaderLength;
+
+ /* Check the IP header length. */
+
+ /* 04-Aug-1998 sw - Really check the IHL? Necessary? */
+
+ if (IpHeaderLength < 5*4) {
+ SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_TX,
+ ("Tx: Invalid IP Header Length %u.\n", IpHeaderLength));
+ pPacketInfo->ProtocolFlags = 0;
+ pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxUnableCts++;
+ return;
+ }
+
+ /* This is an IPv4 frame with a header of valid length. */
+
+ pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxOkCts++;
+
+ /* Check if we should calculate the IP header checksum. */
+
+ ProtocolFlags = pPacketInfo->ProtocolFlags;
+
+ if (ProtocolFlags & SKCS_PROTO_IP) {
+ pPacketInfo->IpHeaderChecksum =
+ SkCsCalculateChecksum(pIpHeader, IpHeaderLength);
+ }
+
+ /* Get the next level protocol identifier. */
+
+ NextLevelProtocol =
+ *(SK_U8 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL);
+
+ /*
+ * Check if this is a TCP or UDP frame and if we should calculate the
+ * TCP/UDP pseudo header checksum.
+ *
+ * Also clear all protocol bit flags of protocols not present in the
+ * frame.
+ */
+
+ if ((ProtocolFlags & SKCS_PROTO_TCP) != 0 &&
+ NextLevelProtocol == SKCS_PROTO_ID_TCP) {
+ /* TCP/IP frame. */
+ ProtocolFlags &= SKCS_PROTO_TCP | SKCS_PROTO_IP;
+ NextLevelProtoStats =
+ &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_TCP];
+ }
+ else if ((ProtocolFlags & SKCS_PROTO_UDP) != 0 &&
+ NextLevelProtocol == SKCS_PROTO_ID_UDP) {
+ /* UDP/IP frame. */
+ ProtocolFlags &= SKCS_PROTO_UDP | SKCS_PROTO_IP;
+ NextLevelProtoStats =
+ &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_UDP];
+ }
+ else {
+ /*
+ * Either not a TCP or UDP frame and/or TCP/UDP processing not
+ * specified.
+ */
+ pPacketInfo->ProtocolFlags = ProtocolFlags & SKCS_PROTO_IP;
+ return;
+ }
+
+ /* Check if this is an IP fragment. */
+
+ /*
+ * Note: An IP fragment has a non-zero "Fragment Offset" field and/or
+ * the "More Fragments" bit set. Thus, if both the "Fragment Offset"
+ * and the "More Fragments" are zero, it is *not* a fragment. We can
+ * easily check both at the same time since they are in the same 16-bit
+ * word.
+ */
+
+ if ((*(SK_U16 *)
+ SKCS_IDX(pIpHeader, SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET) &
+ ~SKCS_IP_DONT_FRAGMENT) != 0) {
+ /* IP fragment; ignore all other protocols. */
+ pPacketInfo->ProtocolFlags = ProtocolFlags & SKCS_PROTO_IP;
+ NextLevelProtoStats->TxUnableCts++;
+ return;
+ }
+
+ /*
+ * Calculate the TCP/UDP pseudo header checksum.
+ */
+
+ /* Get total length of IP header and data. */
+
+ IpDataLength =
+ *(SK_U16 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_TOTAL_LENGTH);
+
+ /* Get length of IP data portion. */
+
+ IpDataLength = SKCS_NTOH16(IpDataLength) - IpHeaderLength;
+
+ /* Calculate the sum of all pseudo header fields (16-bit). */
+
+ PseudoHeaderChecksum =
+ (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+ SKCS_OFS_IP_SOURCE_ADDRESS + 0) +
+ (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+ SKCS_OFS_IP_SOURCE_ADDRESS + 2) +
+ (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+ SKCS_OFS_IP_DESTINATION_ADDRESS + 0) +
+ (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+ SKCS_OFS_IP_DESTINATION_ADDRESS + 2) +
+ (unsigned long) SKCS_HTON16(NextLevelProtocol) +
+ (unsigned long) SKCS_HTON16(IpDataLength);
+
+ /* Add-in any carries. */
+
+ SKCS_OC_ADD(PseudoHeaderChecksum, PseudoHeaderChecksum, 0);
+
+ /* Add-in any new carry. */
+
+ SKCS_OC_ADD(pPacketInfo->PseudoHeaderChecksum, PseudoHeaderChecksum, 0);
+
+ pPacketInfo->ProtocolFlags = ProtocolFlags;
+ NextLevelProtoStats->TxOkCts++; /* Success. */
+} /* SkCsGetSendInfo */
+
+
+/******************************************************************************
+ *
+ * SkCsGetReceiveInfo - verify checksum information for a received packet
+ *
+ * Description:
+ * Verify a received frame's checksum. The function returns a status code
+ * reflecting the result of the verification.
+ *
+ * Note:
+ * Before calling this function you have to verify that the frame is
+ * not padded and Checksum1 and Checksum2 are bigger than 1.
+ *
+ * Arguments:
+ * pAc - Pointer to adapter context struct.
+ *
+ * pIpHeader - Pointer to IP header. Must be at least the length in bytes
+ * of the received IP header including any option fields. For UDP packets,
+ * 8 additional bytes are needed to access the UDP checksum.
+ *
+ * Note: The actual length of the IP header is stored in the lower four
+ * bits of the first octet of the IP header as the number of 4-byte words,
+ * so it must be multiplied by four to get the length in bytes. Thus, the
+ * maximum IP header length is 15 * 4 = 60 bytes.
+ *
+ * Checksum1 - The first 16-bit Internet Checksum calculated by the
+ * hardware starting at the offset returned by SkCsSetReceiveFlags().
+ *
+ * Checksum2 - The second 16-bit Internet Checksum calculated by the
+ * hardware starting at the offset returned by SkCsSetReceiveFlags().
+ *
+ * Returns:
+ * SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame.
+ * SKCS_STATUS_IP_CSUM_ERROR - IP checksum error.
+ * SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame.
+ * SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame
+ * SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok).
+ * SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame).
+ * SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok).
+ * SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok).
+ * SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok.
+ * SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok.
+ * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum.
+ *
+ * Note: If SKCS_OVERWRITE_STATUS is defined, the SKCS_STATUS_XXX values
+ * returned here can be defined in some header file by the module using CSUM.
+ * In this way, the calling module can assign return values for its own needs,
+ * e.g. by assigning bit flags to the individual protocols.
+ */
+SKCS_STATUS SkCsGetReceiveInfo(
+SK_AC *pAc, /* Adapter context struct. */
+void *pIpHeader, /* IP header. */
+unsigned Checksum1, /* Hardware checksum 1. */
+unsigned Checksum2, /* Hardware checksum 2. */
+int NetNumber) /* Net number */
+{
+ /* Internet Header Version found in IP header. */
+ unsigned InternetHeaderVersion;
+
+ /* Length of the IP header as found in IP header. */
+ unsigned IpHeaderLength;
+
+ /* Length of IP data portion. */
+ unsigned IpDataLength;
+
+ /* IP header checksum. */
+ unsigned IpHeaderChecksum;
+
+ /* IP header options checksum, if any. */
+ unsigned IpOptionsChecksum;
+
+ /* IP data checksum, i.e. TCP/UDP checksum. */
+ unsigned IpDataChecksum;
+
+ /* Next level protocol identifier found in IP header. */
+ unsigned NextLevelProtocol;
+
+ /* The checksum of the "next level protocol", i.e. TCP or UDP. */
+ unsigned long NextLevelProtocolChecksum;
+
+ /* Pointer to next level protocol statistics structure. */
+ SKCS_PROTO_STATS *NextLevelProtoStats;
+
+ /* Temporary variable. */
+ unsigned Tmp;
+
+ Tmp = *(SK_U8 *)
+ SKCS_IDX(pIpHeader, SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH);
+
+ /* Get the Internet Header Version (IHV). */
+ /* Note: The IHV is stored in the upper four bits. */
+
+ InternetHeaderVersion = Tmp >> 4;
+
+ /* Check the Internet Header Version. */
+ /* Note: We currently only support IP version 4. */
+
+ if (InternetHeaderVersion != 4) { /* IPv4? */
+ SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_RX,
+ ("Rx: Unknown Internet Header Version %u.\n",
+ InternetHeaderVersion));
+ pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].RxUnableCts++;
+ return (SKCS_STATUS_UNKNOWN_IP_VERSION);
+ }
+
+ /* Get the IP header length (IHL). */
+ /*
+ * Note: The IHL is stored in the lower four bits as the number of
+ * 4-byte words.
+ */
+
+ IpHeaderLength = (Tmp & 0xf) * 4;
+
+ /* Check the IP header length. */
+
+ /* 04-Aug-1998 sw - Really check the IHL? Necessary? */
+
+ if (IpHeaderLength < 5*4) {
+ SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_RX,
+ ("Rx: Invalid IP Header Length %u.\n", IpHeaderLength));
+ pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].RxErrCts++;
+ return (SKCS_STATUS_IP_CSUM_ERROR);
+ }
+
+ /* This is an IPv4 frame with a header of valid length. */
+
+ /* Get the IP header and data checksum. */
+
+ IpDataChecksum = Checksum2;
+
+ /*
+ * The IP header checksum is calculated as follows:
+ *
+ * IpHeaderChecksum = Checksum1 - Checksum2
+ */
+
+ SKCS_OC_SUB(IpHeaderChecksum, Checksum1, Checksum2);
+
+ /* Check if any IP header options. */
+
+ if (IpHeaderLength > SKCS_IP_HEADER_SIZE) {
+
+ /* Get the IP options checksum. */
+
+ IpOptionsChecksum = SkCsCalculateChecksum(
+ SKCS_IDX(pIpHeader, SKCS_IP_HEADER_SIZE),
+ IpHeaderLength - SKCS_IP_HEADER_SIZE);
+
+ /* Adjust the IP header and IP data checksums. */
+
+ SKCS_OC_ADD(IpHeaderChecksum, IpHeaderChecksum, IpOptionsChecksum);
+
+ SKCS_OC_SUB(IpDataChecksum, IpDataChecksum, IpOptionsChecksum);
+ }
+
+ /*
+ * Check if the IP header checksum is ok.
+ *
+ * NOTE: We must check the IP header checksum even if the caller just wants
+ * us to check upper-layer checksums, because we cannot do any further
+ * processing of the packet without a valid IP checksum.
+ */
+
+ /* Get the next level protocol identifier. */
+
+ NextLevelProtocol = *(SK_U8 *)
+ SKCS_IDX(pIpHeader, SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL);
+
+ if (IpHeaderChecksum != 0xFFFF) {
+ pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].RxErrCts++;
+ /* the NDIS tester wants to know the upper level protocol too */
+ if (NextLevelProtocol == SKCS_PROTO_ID_TCP) {
+ return(SKCS_STATUS_IP_CSUM_ERROR_TCP);
+ }
+ else if (NextLevelProtocol == SKCS_PROTO_ID_UDP) {
+ return(SKCS_STATUS_IP_CSUM_ERROR_UDP);
+ }
+ return (SKCS_STATUS_IP_CSUM_ERROR);
+ }
+
+ /*
+ * Check if this is a TCP or UDP frame and if we should calculate the
+ * TCP/UDP pseudo header checksum.
+ *
+ * Also clear all protocol bit flags of protocols not present in the
+ * frame.
+ */
+
+ if ((pAc->Csum.ReceiveFlags[NetNumber] & SKCS_PROTO_TCP) != 0 &&
+ NextLevelProtocol == SKCS_PROTO_ID_TCP) {
+ /* TCP/IP frame. */
+ NextLevelProtoStats =
+ &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_TCP];
+ }
+ else if ((pAc->Csum.ReceiveFlags[NetNumber] & SKCS_PROTO_UDP) != 0 &&
+ NextLevelProtocol == SKCS_PROTO_ID_UDP) {
+ /* UDP/IP frame. */
+ NextLevelProtoStats =
+ &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_UDP];
+ }
+ else {
+ /*
+ * Either not a TCP or UDP frame and/or TCP/UDP processing not
+ * specified.
+ */
+ return (SKCS_STATUS_IP_CSUM_OK);
+ }
+
+ /* Check if this is an IP fragment. */
+
+ /*
+ * Note: An IP fragment has a non-zero "Fragment Offset" field and/or
+ * the "More Fragments" bit set. Thus, if both the "Fragment Offset"
+ * and the "More Fragments" are zero, it is *not* a fragment. We can
+ * easily check both at the same time since they are in the same 16-bit
+ * word.
+ */
+
+ if ((*(SK_U16 *)
+ SKCS_IDX(pIpHeader, SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET) &
+ ~SKCS_IP_DONT_FRAGMENT) != 0) {
+ /* IP fragment; ignore all other protocols. */
+ NextLevelProtoStats->RxUnableCts++;
+ return (SKCS_STATUS_IP_FRAGMENT);
+ }
+
+ /*
+ * 08-May-2000 ra
+ *
+ * From RFC 768 (UDP)
+ * If the computed checksum is zero, it is transmitted as all ones (the
+ * equivalent in one's complement arithmetic). An all zero transmitted
+ * checksum value means that the transmitter generated no checksum (for
+ * debugging or for higher level protocols that don't care).
+ */
+
+ if (NextLevelProtocol == SKCS_PROTO_ID_UDP &&
+ *(SK_U16*)SKCS_IDX(pIpHeader, IpHeaderLength + 6) == 0x0000) {
+
+ NextLevelProtoStats->RxOkCts++;
+
+ return (SKCS_STATUS_IP_CSUM_OK_NO_UDP);
+ }
+
+ /*
+ * Calculate the TCP/UDP checksum.
+ */
+
+ /* Get total length of IP header and data. */
+
+ IpDataLength =
+ *(SK_U16 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_TOTAL_LENGTH);
+
+ /* Get length of IP data portion. */
+
+ IpDataLength = SKCS_NTOH16(IpDataLength) - IpHeaderLength;
+
+ NextLevelProtocolChecksum =
+
+ /* Calculate the pseudo header checksum. */
+
+ (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+ SKCS_OFS_IP_SOURCE_ADDRESS + 0) +
+ (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+ SKCS_OFS_IP_SOURCE_ADDRESS + 2) +
+ (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+ SKCS_OFS_IP_DESTINATION_ADDRESS + 0) +
+ (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+ SKCS_OFS_IP_DESTINATION_ADDRESS + 2) +
+ (unsigned long) SKCS_HTON16(NextLevelProtocol) +
+ (unsigned long) SKCS_HTON16(IpDataLength) +
+
+ /* Add the TCP/UDP header checksum. */
+
+ (unsigned long) IpDataChecksum;
+
+ /* Add-in any carries. */
+
+ SKCS_OC_ADD(NextLevelProtocolChecksum, NextLevelProtocolChecksum, 0);
+
+ /* Add-in any new carry. */
+
+ SKCS_OC_ADD(NextLevelProtocolChecksum, NextLevelProtocolChecksum, 0);
+
+ /* Check if the TCP/UDP checksum is ok. */
+
+ if ((unsigned) NextLevelProtocolChecksum == 0xFFFF) {
+
+ /* TCP/UDP checksum ok. */
+
+ NextLevelProtoStats->RxOkCts++;
+
+ return (NextLevelProtocol == SKCS_PROTO_ID_TCP ?
+ SKCS_STATUS_TCP_CSUM_OK : SKCS_STATUS_UDP_CSUM_OK);
+ }
+
+ /* TCP/UDP checksum error. */
+
+ NextLevelProtoStats->RxErrCts++;
+
+ return (NextLevelProtocol == SKCS_PROTO_ID_TCP ?
+ SKCS_STATUS_TCP_CSUM_ERROR : SKCS_STATUS_UDP_CSUM_ERROR);
+} /* SkCsGetReceiveInfo */
+#endif
+
+
+/******************************************************************************
+ *
+ * SkCsSetReceiveFlags - set checksum receive flags
+ *
+ * Description:
+ * Use this function to set the various receive flags. According to the
+ * protocol flags set by the caller, the start offsets within received
+ * packets of the two hardware checksums are returned. These offsets must
+ * be stored in all receive descriptors.
+ *
+ * Arguments:
+ * pAc - Pointer to adapter context struct.
+ *
+ * ReceiveFlags - Any combination of SK_PROTO_XXX flags of the protocols
+ * for which the caller wants checksum information on received frames.
+ *
+ * pChecksum1Offset - The start offset of the first receive descriptor
+ * hardware checksum to be calculated for received frames is returned
+ * here.
+ *
+ * pChecksum2Offset - The start offset of the second receive descriptor
+ * hardware checksum to be calculated for received frames is returned
+ * here.
+ *
+ * Returns: N/A
+ * Returns the two hardware checksum start offsets.
+ */
+void SkCsSetReceiveFlags(
+SK_AC *pAc, /* Adapter context struct. */
+unsigned ReceiveFlags, /* New receive flags. */
+unsigned *pChecksum1Offset, /* Offset for hardware checksum 1. */
+unsigned *pChecksum2Offset, /* Offset for hardware checksum 2. */
+int NetNumber)
+{
+ /* Save the receive flags. */
+
+ pAc->Csum.ReceiveFlags[NetNumber] = ReceiveFlags;
+
+ /* First checksum start offset is the IP header. */
+ *pChecksum1Offset = SKCS_MAC_HEADER_SIZE;
+
+ /*
+ * Second checksum start offset is the IP data. Note that this may vary
+ * if there are any IP header options in the actual packet.
+ */
+ *pChecksum2Offset = SKCS_MAC_HEADER_SIZE + SKCS_IP_HEADER_SIZE;
+} /* SkCsSetReceiveFlags */
+
+#ifndef SkCsCalculateChecksum
+
+/******************************************************************************
+ *
+ * SkCsCalculateChecksum - calculate checksum for specified data
+ *
+ * Description:
+ * Calculate and return the 16-bit Internet Checksum for the specified
+ * data.
+ *
+ * Arguments:
+ * pData - Pointer to data for which the checksum shall be calculated.
+ * Note: The pointer should be aligned on a 16-bit boundary.
+ *
+ * Length - Length in bytes of data to checksum.
+ *
+ * Returns:
+ * The 16-bit Internet Checksum for the specified data.
+ *
+ * Note: The checksum is calculated in the machine's natural byte order,
+ * i.e. little vs. big endian. Thus, the resulting checksum is different
+ * for the same input data on little and big endian machines.
+ *
+ * However, when written back to the network packet, the byte order is
+ * always in correct network order.
+ */
+unsigned SkCsCalculateChecksum(
+void *pData, /* Data to checksum. */
+unsigned Length) /* Length of data. */
+{
+ SK_U16 *pU16; /* Pointer to the data as 16-bit words. */
+ unsigned long Checksum; /* Checksum; must be at least 32 bits. */
+
+ /* Sum up all 16-bit words. */
+
+ pU16 = (SK_U16 *) pData;
+ for (Checksum = 0; Length > 1; Length -= 2) {
+ Checksum += *pU16++;
+ }
+
+ /* If this is an odd number of bytes, add-in the last byte. */
+
+ if (Length > 0) {
+#ifdef SK_BIG_ENDIAN
+ /* Add the last byte as the high byte. */
+ Checksum += ((unsigned) *(SK_U8 *) pU16) << 8;
+#else /* !SK_BIG_ENDIAN */
+ /* Add the last byte as the low byte. */
+ Checksum += *(SK_U8 *) pU16;
+#endif /* !SK_BIG_ENDIAN */
+ }
+
+ /* Add-in any carries. */
+
+ SKCS_OC_ADD(Checksum, Checksum, 0);
+
+ /* Add-in any new carry. */
+
+ SKCS_OC_ADD(Checksum, Checksum, 0);
+
+ /* Note: All bits beyond the 16-bit limit are now zero. */
+
+ return ((unsigned) Checksum);
+} /* SkCsCalculateChecksum */
+
+#endif /* SkCsCalculateChecksum */
+
+/******************************************************************************
+ *
+ * SkCsEvent - the CSUM event dispatcher
+ *
+ * Description:
+ * This is the event handler for the CSUM module.
+ *
+ * Arguments:
+ * pAc - Pointer to adapter context.
+ *
+ * Ioc - I/O context.
+ *
+ * Event - Event id.
+ *
+ * Param - Event dependent parameter.
+ *
+ * Returns:
+ * The 16-bit Internet Checksum for the specified data.
+ *
+ * Note: The checksum is calculated in the machine's natural byte order,
+ * i.e. little vs. big endian. Thus, the resulting checksum is different
+ * for the same input data on little and big endian machines.
+ *
+ * However, when written back to the network packet, the byte order is
+ * always in correct network order.
+ */
+int SkCsEvent(
+SK_AC *pAc, /* Pointer to adapter context. */
+SK_IOC Ioc, /* I/O context. */
+SK_U32 Event, /* Event id. */
+SK_EVPARA Param) /* Event dependent parameter. */
+{
+ int ProtoIndex;
+ int NetNumber;
+
+ switch (Event) {
+ /*
+ * Clear protocol statistics.
+ *
+ * Param - Protocol index, or -1 for all protocols.
+ * - Net number.
+ */
+ case SK_CSUM_EVENT_CLEAR_PROTO_STATS:
+
+ ProtoIndex = (int)Param.Para32[1];
+ NetNumber = (int)Param.Para32[0];
+ if (ProtoIndex < 0) { /* Clear for all protocols. */
+ if (NetNumber >= 0) {
+ memset(&pAc->Csum.ProtoStats[NetNumber][0], 0,
+ sizeof(pAc->Csum.ProtoStats[NetNumber]));
+ }
+ }
+ else { /* Clear for individual protocol. */
+ memset(&pAc->Csum.ProtoStats[NetNumber][ProtoIndex], 0,
+ sizeof(pAc->Csum.ProtoStats[NetNumber][ProtoIndex]));
+ }
+ break;
+ default:
+ break;
+ }
+ return (0); /* Success. */
+} /* SkCsEvent */
+
+#endif /* SK_USE_CSUM */
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
new file mode 100644
index 0000000..61a6094
--- /dev/null
+++ b/drivers/net/sk98lin/skge.c
@@ -0,0 +1,4864 @@
+/******************************************************************************
+ *
+ * Name: skge.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.46 $
+ * Date: $Date: 2003/02/25 14:16:36 $
+ * Purpose: The main driver source module
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * Driver for SysKonnect Gigabit Ethernet Server Adapters:
+ *
+ * SK-9871 (single link 1000Base-ZX)
+ * SK-9872 (dual link 1000Base-ZX)
+ * SK-9861 (single link 1000Base-SX, VF45 Volition Plug)
+ * SK-9862 (dual link 1000Base-SX, VF45 Volition Plug)
+ * SK-9841 (single link 1000Base-LX)
+ * SK-9842 (dual link 1000Base-LX)
+ * SK-9843 (single link 1000Base-SX)
+ * SK-9844 (dual link 1000Base-SX)
+ * SK-9821 (single link 1000Base-T)
+ * SK-9822 (dual link 1000Base-T)
+ * SK-9881 (single link 1000Base-SX V2 LC)
+ * SK-9871 (single link 1000Base-ZX V2)
+ * SK-9861 (single link 1000Base-SX V2, VF45 Volition Plug)
+ * SK-9841 (single link 1000Base-LX V2)
+ * SK-9843 (single link 1000Base-SX V2)
+ * SK-9821 (single link 1000Base-T V2)
+ *
+ * Created 10-Feb-1999, based on Linux' acenic.c, 3c59x.c and
+ * SysKonnects GEnesis Solaris driver
+ * Author: Christoph Goos (cgoos@syskonnect.de)
+ * Mirko Lindner (mlindner@syskonnect.de)
+ *
+ * Address all question to: linux@syskonnect.de
+ *
+ * The technical manual for the adapters is available from SysKonnect's
+ * web pages: www.syskonnect.com
+ * Goto "Support" and search Knowledge Base for "manual".
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skge.c,v $
+ * Revision 1.46 2003/02/25 14:16:36 mlindner
+ * Fix: Copyright statement
+ *
+ * Revision 1.45 2003/02/25 13:25:55 mlindner
+ * Add: Performance improvements
+ * Add: Support for various vendors
+ * Fix: Init function
+ *
+ * Revision 1.44 2003/01/09 09:25:26 mlindner
+ * Fix: Remove useless init_module/cleanup_module forward declarations
+ *
+ * Revision 1.43 2002/11/29 08:42:41 mlindner
+ * Fix: Boot message
+ *
+ * Revision 1.42 2002/11/28 13:30:23 mlindner
+ * Add: New frame check
+ *
+ * Revision 1.41 2002/11/27 13:55:18 mlindner
+ * Fix: Drop wrong csum packets
+ * Fix: Initialize proc_entry after hw check
+ *
+ * Revision 1.40 2002/10/31 07:50:37 tschilli
+ * Function SkGeInitAssignRamToQueues() from common module inserted.
+ * Autonegotiation is set to ON for all adapters.
+ * LinkSpeedUsed is used in link up status report.
+ * Role parameter will show up for 1000 Mbps links only.
+ * GetConfiguration() inserted after init level 1 in SkGeChangeMtu().
+ * All return values of SkGeInit() and SkGeInitPort() are checked.
+ *
+ * Revision 1.39 2002/10/02 12:56:05 mlindner
+ * Add: Support for Yukon
+ * Add: Support for ZEROCOPY, scatter-gather and hw checksum
+ * Add: New transmit ring function (use SG and TCP/UDP hardware checksumming)
+ * Add: New init function
+ * Add: Speed check and setup
+ * Add: Merge source for kernel 2.2.x and 2.4.x
+ * Add: Opcode check for tcp
+ * Add: Frame length check
+ * Fix: Transmit complete interrupt
+ * Fix: Interrupt moderation
+ *
+ * Revision 1.29.2.13 2002/01/14 12:44:52 mlindner
+ * Fix: Rlmt modes
+ *
+ * Revision 1.29.2.12 2001/12/07 12:06:18 mlindner
+ * Fix: malloc -> slab changes
+ *
+ * Revision 1.29.2.11 2001/12/06 15:19:20 mlindner
+ * Add: DMA attributes
+ * Fix: Module initialisation
+ * Fix: pci_map_single and pci_unmap_single replaced
+ *
+ * Revision 1.29.2.10 2001/12/06 09:56:50 mlindner
+ * Corrected some printk's
+ *
+ * Revision 1.29.2.9 2001/09/05 12:15:34 mlindner
+ * Add: LBFO Changes
+ * Fix: Counter Errors (Jumbo == to long errors)
+ * Fix: Changed pAC->PciDev declaration
+ * Fix: too short counters
+ *
+ * Revision 1.29.2.8 2001/06/25 12:10:44 mlindner
+ * fix: ReceiveIrq() changed.
+ *
+ * Revision 1.29.2.7 2001/06/25 08:07:05 mlindner
+ * fix: RLMT locking in ReceiveIrq() changed.
+ *
+ * Revision 1.29.2.6 2001/05/21 07:59:29 mlindner
+ * fix: MTU init problems
+ *
+ * Revision 1.29.2.5 2001/05/08 11:25:08 mlindner
+ * fix: removed VLAN error message
+ *
+ * Revision 1.29.2.4 2001/05/04 13:31:43 gklug
+ * fix: do not handle eth_copy on bad fragments received.
+ *
+ * Revision 1.29.2.3 2001/04/23 08:06:43 mlindner
+ * Fix: error handling
+ *
+ * Revision 1.29.2.2 2001/03/15 12:04:54 mlindner
+ * Fixed memory problem
+ *
+ * Revision 1.29.2.1 2001/03/12 16:41:44 mlindner
+ * add: procfs function
+ * add: dual-net function
+ * add: RLMT networks
+ * add: extended PNMI features
+ *
+ * Kernel 2.4.x specific:
+ * Revision 1.xx 2000/09/12 13:31:56 cgoos
+ * Fixed missign "dev=NULL in skge_probe.
+ * Added counting for jumbo frames (corrects error statistic).
+ * Removed VLAN tag check (enables VLAN support).
+ *
+ * Kernel 2.2.x specific:
+ * Revision 1.29 2000/02/21 13:31:56 cgoos
+ * Fixed "unused" warning for UltraSPARC change.
+ *
+ * Partially kernel 2.2.x specific:
+ * Revision 1.28 2000/02/21 10:32:36 cgoos
+ * Added fixes for UltraSPARC.
+ * Now printing RlmtMode and PrefPort setting at startup.
+ * Changed XmitFrame return value.
+ * Fixed rx checksum calculation for BIG ENDIAN systems.
+ * Fixed rx jumbo frames counted as ierrors.
+ *
+ *
+ * Revision 1.27 1999/11/25 09:06:28 cgoos
+ * Changed base_addr to unsigned long.
+ *
+ * Revision 1.26 1999/11/22 13:29:16 cgoos
+ * Changed license header to GPL.
+ * Changes for inclusion in linux kernel (2.2.13).
+ * Removed 2.0.x defines.
+ * Changed SkGeProbe to skge_probe.
+ * Added checks in SkGeIoctl.
+ *
+ * Revision 1.25 1999/10/07 14:47:52 cgoos
+ * Changed 984x to 98xx.
+ *
+ * Revision 1.24 1999/09/30 07:21:01 cgoos
+ * Removed SK_RLMT_SLOW_LOOKAHEAD option.
+ * Giving spanning tree packets also to OS now.
+ *
+ * Revision 1.23 1999/09/29 07:36:50 cgoos
+ * Changed assignment for IsBc/IsMc.
+ *
+ * Revision 1.22 1999/09/28 12:57:09 cgoos
+ * Added CheckQueue also to Single-Port-ISR.
+ *
+ * Revision 1.21 1999/09/28 12:42:41 cgoos
+ * Changed parameter strings for RlmtMode.
+ *
+ * Revision 1.20 1999/09/28 12:37:57 cgoos
+ * Added CheckQueue for fast delivery of RLMT frames.
+ *
+ * Revision 1.19 1999/09/16 07:57:25 cgoos
+ * Copperfield changes.
+ *
+ * Revision 1.18 1999/09/03 13:06:30 cgoos
+ * Fixed RlmtMode=CheckSeg bug: wrong DEV_KFREE_SKB in RLMT_SEND caused
+ * double allocated skb's.
+ * FrameStat in ReceiveIrq was accessed via wrong Rxd.
+ * Queue size for async. standby Tx queue was zero.
+ * FillRxLimit of 0 could cause problems with ReQueue, changed to 1.
+ * Removed debug output of checksum statistic.
+ *
+ * Revision 1.17 1999/08/11 13:55:27 cgoos
+ * Transmit descriptor polling was not reenabled after SkGePortInit.
+ *
+ * Revision 1.16 1999/07/27 15:17:29 cgoos
+ * Added some "\n" in output strings (removed while debuging...).
+ *
+ * Revision 1.15 1999/07/23 12:09:30 cgoos
+ * Performance optimization, rx checksumming, large frame support.
+ *
+ * Revision 1.14 1999/07/14 11:26:27 cgoos
+ * Removed Link LED settings (now in RLMT).
+ * Added status output at NET UP.
+ * Fixed SMP problems with Tx and SWITCH running in parallel.
+ * Fixed return code problem at RLMT_SEND event.
+ *
+ * Revision 1.13 1999/04/07 10:11:42 cgoos
+ * Fixed Single Port problems.
+ * Fixed Multi-Adapter problems.
+ * Always display startup string.
+ *
+ * Revision 1.12 1999/03/29 12:26:37 cgoos
+ * Reversed locking to fine granularity.
+ * Fixed skb double alloc problem (caused by incorrect xmit return code).
+ * Enhanced function descriptions.
+ *
+ * Revision 1.11 1999/03/15 13:10:51 cgoos
+ * Changed device identifier in output string to ethX.
+ *
+ * Revision 1.10 1999/03/15 12:12:34 cgoos
+ * Changed copyright notice.
+ *
+ * Revision 1.9 1999/03/15 12:10:17 cgoos
+ * Changed locking to one driver lock.
+ * Added check of SK_AC-size (for consistency with library).
+ *
+ * Revision 1.8 1999/03/08 11:44:02 cgoos
+ * Fixed missing dev->tbusy in SkGeXmit.
+ * Changed large frame (jumbo) buffer number.
+ * Added copying of short frames.
+ *
+ * Revision 1.7 1999/03/04 13:26:57 cgoos
+ * Fixed spinlock calls for SMP.
+ *
+ * Revision 1.6 1999/03/02 09:53:51 cgoos
+ * Added descriptor revertion for big endian machines.
+ *
+ * Revision 1.5 1999/03/01 08:50:59 cgoos
+ * Fixed SkGeChangeMtu.
+ * Fixed pci config space accesses.
+ *
+ * Revision 1.4 1999/02/18 15:48:44 cgoos
+ * Corrected some printk's.
+ *
+ * Revision 1.3 1999/02/18 12:45:55 cgoos
+ * Changed SK_MAX_CARD_PARAM to default 16
+ *
+ * Revision 1.2 1999/02/18 10:55:32 cgoos
+ * Removed SkGeDrvTimeStamp function.
+ * Printing "ethX:" before adapter type at adapter init.
+ *
+ *
+ * 10-Feb-1999 cg Created, based on Linux' acenic.c, 3c59x.c and
+ * SysKonnects GEnesis Solaris driver
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Possible compiler options (#define xxx / -Dxxx):
+ *
+ * debugging can be enable by changing SK_DEBUG_CHKMOD and
+ * SK_DEBUG_CHKCAT in makefile (described there).
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the main module of the Linux GE driver.
+ *
+ * All source files except skge.c, skdrv1st.h, skdrv2nd.h and sktypes.h
+ * are part of SysKonnect's COMMON MODULES for the SK-98xx adapters.
+ * Those are used for drivers on multiple OS', so some thing may seem
+ * unnecessary complicated on Linux. Please do not try to 'clean up'
+ * them without VERY good reasons, because this will make it more
+ * difficult to keep the Linux driver in synchronisation with the
+ * other versions.
+ *
+ * Include file hierarchy:
+ *
+ * <linux/module.h>
+ *
+ * "h/skdrv1st.h"
+ * <linux/version.h>
+ * <linux/types.h>
+ * <linux/kernel.h>
+ * <linux/string.h>
+ * <linux/errno.h>
+ * <linux/ioport.h>
+ * <linux/slab.h>
+ * <linux/interrupt.h>
+ * <linux/pci.h>
+ * <asm/byteorder.h>
+ * <asm/bitops.h>
+ * <asm/io.h>
+ * <linux/netdevice.h>
+ * <linux/etherdevice.h>
+ * <linux/skbuff.h>
+ * those three depending on kernel version used:
+ * <linux/bios32.h>
+ * <linux/init.h>
+ * <asm/uaccess.h>
+ * <net/checksum.h>
+ *
+ * "h/skerror.h"
+ * "h/skdebug.h"
+ * "h/sktypes.h"
+ * "h/lm80.h"
+ * "h/xmac_ii.h"
+ *
+ * "h/skdrv2nd.h"
+ * "h/skqueue.h"
+ * "h/skgehwt.h"
+ * "h/sktimer.h"
+ * "h/ski2c.h"
+ * "h/skgepnmi.h"
+ * "h/skvpd.h"
+ * "h/skgehw.h"
+ * "h/skgeinit.h"
+ * "h/skaddr.h"
+ * "h/skgesirq.h"
+ * "h/skcsum.h"
+ * "h/skrlmt.h"
+ *
+ ******************************************************************************/
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+#include "h/skversion.h"
+#if 0
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#endif
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+
+
+/* defines ******************************************************************/
+/* for debuging on x86 only */
+/* #define BREAKPOINT() asm(" int $3"); */
+
+/* use the scatter-gather functionality with sendfile() */
+#if 0
+#define SK_ZEROCOPY
+#endif
+
+/* use of a transmit complete interrupt */
+#define USE_TX_COMPLETE
+
+/* use interrupt moderation (for tx complete only) */
+#define USE_INT_MOD
+#define INTS_PER_SEC 1000
+
+/*
+ * threshold for copying small receive frames
+ * set to 0 to avoid copying, set to 9001 to copy all frames
+ */
+#define SK_COPY_THRESHOLD 50
+
+/* number of adapters that can be configured via command line params */
+#define SK_MAX_CARD_PARAM 16
+
+
+/*
+ * use those defines for a compile-in version of the driver instead
+ * of command line parameters
+ */
+/* #define LINK_SPEED_A {"Auto", } */
+/* #define LINK_SPEED_B {"Auto", } */
+/* #define AUTO_NEG_A {"Sense", } */
+/* #define AUTO_NEG_B {"Sense", } */
+/* #define DUP_CAP_A {"Both", } */
+/* #define DUP_CAP_B {"Both", } */
+/* #define FLOW_CTRL_A {"SymOrRem", } */
+/* #define FLOW_CTRL_B {"SymOrRem", } */
+/* #define ROLE_A {"Auto", } */
+/* #define ROLE_B {"Auto", } */
+/* #define PREF_PORT {"A", } */
+/* #define RLMT_MODE {"CheckLinkState", } */
+
+#define DEV_KFREE_SKB(skb) dev_kfree_skb(skb)
+#define DEV_KFREE_SKB_IRQ(skb) dev_kfree_skb_irq(skb)
+#define DEV_KFREE_SKB_ANY(skb) dev_kfree_skb_any(skb)
+
+/* function prototypes ******************************************************/
+static void FreeResources(struct SK_NET_DEVICE *dev);
+static int SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC);
+static SK_BOOL BoardAllocMem(SK_AC *pAC);
+static void BoardFreeMem(SK_AC *pAC);
+static void BoardInitMem(SK_AC *pAC);
+static void SetupRing(SK_AC*, void*, uintptr_t, RXD**, RXD**, RXD**,
+ int*, SK_BOOL);
+
+#if 0
+static void SkGeIsr(int irq, void *dev_id, struct pt_regs *ptregs);
+static void SkGeIsrOnePort(int irq, void *dev_id, struct pt_regs *ptregs);
+static int SkGeOpen(struct SK_NET_DEVICE *dev);
+static int SkGeClose(struct SK_NET_DEVICE *dev);
+static int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev);
+static int SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p);
+static void SkGeSetRxMode(struct SK_NET_DEVICE *dev);
+static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev);
+static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd);
+#else
+void SkGeIsr(int irq, void *dev_id, struct pt_regs *ptregs);
+void SkGeIsrOnePort(int irq, void *dev_id, struct pt_regs *ptregs);
+int SkGeOpen(struct SK_NET_DEVICE *dev);
+int SkGeClose(struct SK_NET_DEVICE *dev);
+int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev);
+#endif
+static void GetConfiguration(SK_AC*);
+static void ProductStr(SK_AC*);
+static int XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*);
+static void FreeTxDescriptors(SK_AC*pAC, TX_PORT*);
+static void FillRxRing(SK_AC*, RX_PORT*);
+static SK_BOOL FillRxDescriptor(SK_AC*, RX_PORT*);
+#if 0
+static void ReceiveIrq(SK_AC*, RX_PORT*, SK_BOOL);
+#else
+void ReceiveIrq(SK_AC*, RX_PORT*, SK_BOOL);
+#endif
+static void ClearAndStartRx(SK_AC*, int);
+static void ClearTxIrq(SK_AC*, int, int);
+static void ClearRxRing(SK_AC*, RX_PORT*);
+static void ClearTxRing(SK_AC*, TX_PORT*);
+#if 0
+static void SetQueueSizes(SK_AC *pAC);
+
+static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int new_mtu);
+#endif
+static void PortReInitBmu(SK_AC*, int);
+#if 0
+static int SkGeIocMib(DEV_NET*, unsigned int, int);
+static int XmitFrameSG(SK_AC*, TX_PORT*, struct sk_buff*);
+#endif
+
+/*Extern */
+
+/* external Proc function */
+extern int proc_read(
+ char *buffer,
+ char **buffer_location,
+ off_t offset,
+ int buffer_length,
+ int *eof,
+ void *data);
+
+#ifdef DEBUG
+static void DumpMsg(struct sk_buff*, char*);
+static void DumpData(char*, int);
+static void DumpLong(char*, int);
+#endif
+void dump_frag( SK_U8 *data, int length);
+
+/* global variables *********************************************************/
+#if 0
+static const char *BootString = BOOT_STRING;
+#endif
+struct SK_NET_DEVICE *SkGeRootDev = NULL;
+static int probed __initdata = 0;
+
+/* local variables **********************************************************/
+static uintptr_t TxQueueAddr[SK_MAX_MACS][2] = {{0x680, 0x600},{0x780, 0x700}};
+static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480};
+
+
+/* local variables **********************************************************/
+const char SK_Root_Dir_entry[8];
+
+#if 0
+static struct proc_dir_entry *pSkRootDir;
+#endif
+
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_3COM, 0x1700},
+ {PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE},
+ {PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU},
+ {}
+};
+
+
+/*****************************************************************************
+ *
+ * skge_probe - find all SK-98xx adapters
+ *
+ * Description:
+ * This function scans the PCI bus for SK-98xx adapters. Resources for
+ * each adapter are allocated and the adapter is brought into Init 1
+ * state.
+ *
+ * Returns:
+ * 0, if everything is ok
+ * !=0, on error
+ */
+#if 0
+static int __init skge_probe (void)
+#else
+int skge_probe (struct eth_device ** ret_dev)
+#endif
+{
+#if 0
+ int proc_root_initialized = 0;
+#endif
+ int boards_found = 0;
+#if 0
+ int vendor_flag = SK_FALSE;
+#endif
+ SK_AC *pAC;
+ DEV_NET *pNet = NULL;
+#if 0
+ struct proc_dir_entry *pProcFile;
+ struct pci_dev *pdev = NULL;
+ unsigned long base_address;
+#else
+ u32 base_address;
+#endif
+ struct SK_NET_DEVICE *dev = NULL;
+#if 0
+ SK_BOOL DeviceFound = SK_FALSE;
+#endif
+ SK_BOOL BootStringCount = SK_FALSE;
+#if 1
+ pci_dev_t devno;
+#endif
+
+ if (probed)
+ return -ENODEV;
+ probed++;
+
+ if (!pci_present()) /* is PCI support present? */
+ return -ENODEV;
+
+#if 0
+ while((pdev = pci_find_class(PCI_CLASS_NETWORK_ETHERNET << 8, pdev)))
+#else
+ while((devno = pci_find_devices (supported, boards_found)) >= 0)
+#endif
+ {
+
+ dev = NULL;
+ pNet = NULL;
+
+
+#if 0
+ SK_PCI_ISCOMPLIANT(vendor_flag, pdev);
+ if (!vendor_flag)
+ continue;
+#endif
+
+/* if ((pdev->vendor != PCI_VENDOR_ID_SYSKONNECT) &&
+ ((pdev->device != PCI_DEVICE_ID_SYSKONNECT_GE) ||
+ (pdev->device != PCI_DEVICE_ID_SYSKONNECT_YU))){
+ continue;
+ }
+*/
+#if 0
+ /* Configure DMA attributes. */
+ if (pci_set_dma_mask(pdev, (u64) 0xffffffffffffffff) &&
+ pci_set_dma_mask(pdev, (u64) 0xffffffff))
+ continue;
+#endif
+
+
+#if 0
+ if ((dev = init_etherdev(dev, sizeof(DEV_NET))) == NULL) {
+ printk(KERN_ERR "Unable to allocate etherdev "
+ "structure!\n");
+ break;
+ }
+#else
+ dev = malloc (sizeof *dev);
+ memset(dev, 0, sizeof(*dev));
+ dev->priv = malloc(sizeof(DEV_NET));
+#endif
+
+ if (dev->priv == NULL) {
+ printk(KERN_ERR "Unable to allocate adapter "
+ "structure!\n");
+ break;
+ }
+
+ pNet = dev->priv;
+ pNet->pAC = kmalloc(sizeof(SK_AC), GFP_KERNEL);
+ if (pNet->pAC == NULL){
+ kfree(dev->priv);
+ printk(KERN_ERR "Unable to allocate adapter "
+ "structure!\n");
+ break;
+ }
+
+ /* Print message */
+ if (!BootStringCount) {
+ /* set display flag to TRUE so that */
+ /* we only display this string ONCE */
+ BootStringCount = SK_TRUE;
+#ifdef SK98_INFO
+ printk("%s\n", BootString);
+#endif
+ }
+
+ memset(pNet->pAC, 0, sizeof(SK_AC));
+ pAC = pNet->pAC;
+#if 0
+ pAC->PciDev = pdev;
+ pAC->PciDevId = pdev->device;
+ pAC->dev[0] = dev;
+ pAC->dev[1] = dev;
+#else
+ pAC->PciDev = devno;
+ ret_dev[0] = pAC->dev[0] = dev;
+ ret_dev[1] = pAC->dev[1] = dev;
+#endif
+ sprintf(pAC->Name, "SysKonnect SK-98xx");
+ pAC->CheckQueue = SK_FALSE;
+
+ pNet->Mtu = 1500;
+ pNet->Up = 0;
+#if 0
+ dev->irq = pdev->irq;
+
+ dev->open = &SkGeOpen;
+ dev->stop = &SkGeClose;
+ dev->hard_start_xmit = &SkGeXmit;
+ dev->get_stats = &SkGeStats;
+ dev->set_multicast_list = &SkGeSetRxMode;
+ dev->set_mac_address = &SkGeSetMacAddr;
+ dev->do_ioctl = &SkGeIoctl;
+ dev->change_mtu = &SkGeChangeMtu;
+ dev->flags &= ~IFF_RUNNING;
+#endif
+
+#ifdef SK_ZEROCOPY
+ if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
+ /* Use only if yukon hardware */
+ /* SK and ZEROCOPY - fly baby... */
+ dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+ }
+#endif
+
+#if 0
+ /*
+ * Dummy value.
+ */
+ dev->base_addr = 42;
+ pci_set_master(pdev);
+
+ pci_set_master(pdev);
+ base_address = pci_resource_start (pdev, 0);
+#else
+ pci_write_config_dword(devno,
+ PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ pci_read_config_dword (devno, PCI_BASE_ADDRESS_0,
+ &base_address);
+#endif
+
+#ifdef SK_BIG_ENDIAN
+ /*
+ * On big endian machines, we use the adapter's aibility of
+ * reading the descriptors as big endian.
+ */
+ {
+ SK_U32 our2;
+ SkPciReadCfgDWord(pAC, PCI_OUR_REG_2, &our2);
+ our2 |= PCI_REV_DESC;
+ SkPciWriteCfgDWord(pAC, PCI_OUR_REG_2, our2);
+ }
+#endif
+
+ /*
+ * Remap the regs into kernel space.
+ */
+#if 0
+ pAC->IoBase = (char*)ioremap(base_address, 0x4000);
+#else
+ pAC->IoBase = (char*)pci_mem_to_phys(devno, base_address);
+#endif
+
+ if (!pAC->IoBase){
+ printk(KERN_ERR "%s: Unable to map I/O register, "
+ "SK 98xx No. %i will be disabled.\n",
+ dev->name, boards_found);
+ kfree(dev);
+ break;
+ }
+
+ pAC->Index = boards_found;
+ if (SkGeBoardInit(dev, pAC)) {
+ FreeResources(dev);
+ kfree(dev);
+ continue;
+ }
+
+#if 0
+ memcpy((caddr_t) &dev->dev_addr,
+ (caddr_t) &pAC->Addr.Net[0].CurrentMacAddress, 6);
+#else
+ memcpy((caddr_t) &dev->enetaddr,
+ (caddr_t) &pAC->Addr.Net[0].CurrentMacAddress, 6);
+#endif
+
+#if 0
+ /* First adapter... Create proc and print message */
+ if (!DeviceFound) {
+ DeviceFound = SK_TRUE;
+ SK_MEMCPY(&SK_Root_Dir_entry, BootString,
+ sizeof(SK_Root_Dir_entry) - 1);
+
+ /*Create proc (directory)*/
+ if(!proc_root_initialized) {
+ pSkRootDir = create_proc_entry(SK_Root_Dir_entry,
+ S_IFDIR | S_IWUSR | S_IRUGO | S_IXUGO, proc_net);
+ proc_root_initialized = 1;
+ }
+
+ pSkRootDir->owner = THIS_MODULE;
+ }
+
+
+ /* Create proc file */
+ pProcFile = create_proc_entry(dev->name,
+ S_IFREG | S_IXUSR | S_IWGRP | S_IROTH,
+ pSkRootDir);
+
+
+ pProcFile->read_proc = proc_read;
+ pProcFile->write_proc = NULL;
+ pProcFile->nlink = 1;
+ pProcFile->size = sizeof(dev->name + 1);
+ pProcFile->data = (void *)pProcFile;
+#endif
+
+ pNet->PortNr = 0;
+ pNet->NetNr = 0;
+
+#ifdef SK_ZEROCOPY
+ if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
+ /* SG and ZEROCOPY - fly baby... */
+ dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+ }
+#endif
+
+ boards_found++;
+
+ /* More then one port found */
+ if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
+#if 0
+ if ((dev = init_etherdev(NULL, sizeof(DEV_NET))) == 0) {
+ printk(KERN_ERR "Unable to allocate etherdev "
+ "structure!\n");
+ break;
+ }
+#else
+ dev = malloc (sizeof *dev);
+ memset(dev, 0, sizeof(*dev));
+ dev->priv = malloc(sizeof(DEV_NET));
+#endif
+
+ pAC->dev[1] = dev;
+ pNet = dev->priv;
+ pNet->PortNr = 1;
+ pNet->NetNr = 1;
+ pNet->pAC = pAC;
+ pNet->Mtu = 1500;
+ pNet->Up = 0;
+
+#if 0
+ dev->open = &SkGeOpen;
+ dev->stop = &SkGeClose;
+ dev->hard_start_xmit = &SkGeXmit;
+ dev->get_stats = &SkGeStats;
+ dev->set_multicast_list = &SkGeSetRxMode;
+ dev->set_mac_address = &SkGeSetMacAddr;
+ dev->do_ioctl = &SkGeIoctl;
+ dev->change_mtu = &SkGeChangeMtu;
+ dev->flags &= ~IFF_RUNNING;
+#endif
+
+#ifdef SK_ZEROCOPY
+ if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
+ /* SG and ZEROCOPY - fly baby... */
+ dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+ }
+#endif
+
+#if 0
+ pProcFile = create_proc_entry(dev->name,
+ S_IFREG | S_IXUSR | S_IWGRP | S_IROTH,
+ pSkRootDir);
+
+
+ pProcFile->read_proc = proc_read;
+ pProcFile->write_proc = NULL;
+ pProcFile->nlink = 1;
+ pProcFile->size = sizeof(dev->name + 1);
+ pProcFile->data = (void *)pProcFile;
+#endif
+
+#if 0
+ memcpy((caddr_t) &dev->dev_addr,
+ (caddr_t) &pAC->Addr.Net[1].CurrentMacAddress, 6);
+#else
+ memcpy((caddr_t) &dev->enetaddr,
+ (caddr_t) &pAC->Addr.Net[1].CurrentMacAddress, 6);
+#endif
+
+ printk("%s: %s\n", dev->name, pAC->DeviceStr);
+ printk(" PrefPort:B RlmtMode:Dual Check Link State\n");
+
+ }
+
+
+ /* Save the hardware revision */
+ pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) +
+ (pAC->GIni.GIPciHwRev & 0x0F);
+
+ /*
+ * This is bollocks, but we need to tell the net-init
+ * code that it shall go for the next device.
+ */
+#if 0
+#ifndef MODULE
+ dev->base_addr = 0;
+#endif
+#endif
+ }
+
+ /*
+ * If we're at this point we're going through skge_probe() for
+ * the first time. Return success (0) if we've initialized 1
+ * or more boards. Otherwise, return failure (-ENODEV).
+ */
+
+ return boards_found;
+} /* skge_probe */
+
+
+/*****************************************************************************
+ *
+ * FreeResources - release resources allocated for adapter
+ *
+ * Description:
+ * This function releases the IRQ, unmaps the IO and
+ * frees the desriptor ring.
+ *
+ * Returns: N/A
+ *
+ */
+static void FreeResources(struct SK_NET_DEVICE *dev)
+{
+SK_U32 AllocFlag;
+DEV_NET *pNet;
+SK_AC *pAC;
+
+ if (dev->priv) {
+ pNet = (DEV_NET*) dev->priv;
+ pAC = pNet->pAC;
+ AllocFlag = pAC->AllocFlag;
+#if 0
+ if (AllocFlag & SK_ALLOC_IRQ) {
+ free_irq(dev->irq, dev);
+ }
+ if (pAC->IoBase) {
+ iounmap(pAC->IoBase);
+ }
+#endif
+ if (pAC->pDescrMem) {
+ BoardFreeMem(pAC);
+ }
+ }
+
+} /* FreeResources */
+
+#if 0
+MODULE_AUTHOR("Mirko Lindner <mlindner@syskonnect.de>");
+MODULE_DESCRIPTION("SysKonnect SK-NET Gigabit Ethernet SK-98xx driver");
+MODULE_LICENSE("GPL");
+MODULE_PARM(Speed_A, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
+MODULE_PARM(Speed_B, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
+MODULE_PARM(AutoNeg_A, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
+MODULE_PARM(AutoNeg_B, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
+MODULE_PARM(DupCap_A, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
+MODULE_PARM(DupCap_B, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
+MODULE_PARM(FlowCtrl_A, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
+MODULE_PARM(FlowCtrl_B, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
+MODULE_PARM(Role_A, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
+MODULE_PARM(Role_B, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
+MODULE_PARM(PrefPort, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
+MODULE_PARM(RlmtMode, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
+/* not used, just there because every driver should have them: */
+MODULE_PARM(options, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "i");
+MODULE_PARM(debug, "i");
+#endif
+
+
+#ifdef LINK_SPEED_A
+static char *Speed_A[SK_MAX_CARD_PARAM] = LINK_SPEED_A;
+#else
+static char *Speed_A[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef LINK_SPEED_B
+static char *Speed_B[SK_MAX_CARD_PARAM] = LINK_SPEED_B;
+#else
+static char *Speed_B[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef AUTO_NEG_A
+static char *AutoNeg_A[SK_MAX_CARD_PARAM] = AUTO_NEG_A;
+#else
+static char *AutoNeg_A[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef DUP_CAP_A
+static char *DupCap_A[SK_MAX_CARD_PARAM] = DUP_CAP_A;
+#else
+static char *DupCap_A[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef FLOW_CTRL_A
+static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = FLOW_CTRL_A;
+#else
+static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef ROLE_A
+static char *Role_A[SK_MAX_CARD_PARAM] = ROLE_A;
+#else
+static char *Role_A[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef AUTO_NEG_B
+static char *AutoNeg_B[SK_MAX_CARD_PARAM] = AUTO_NEG_B;
+#else
+static char *AutoNeg_B[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef DUP_CAP_B
+static char *DupCap_B[SK_MAX_CARD_PARAM] = DUP_CAP_B;
+#else
+static char *DupCap_B[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef FLOW_CTRL_B
+static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = FLOW_CTRL_B;
+#else
+static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef ROLE_B
+static char *Role_B[SK_MAX_CARD_PARAM] = ROLE_B;
+#else
+static char *Role_B[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef PREF_PORT
+static char *PrefPort[SK_MAX_CARD_PARAM] = PREF_PORT;
+#else
+static char *PrefPort[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef RLMT_MODE
+static char *RlmtMode[SK_MAX_CARD_PARAM] = RLMT_MODE;
+#else
+static char *RlmtMode[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#if 0
+static int debug = 0; /* not used */
+static int options[SK_MAX_CARD_PARAM] = {0, }; /* not used */
+
+
+/*****************************************************************************
+ *
+ * skge_init_module - module initialization function
+ *
+ * Description:
+ * Very simple, only call skge_probe and return approriate result.
+ *
+ * Returns:
+ * 0, if everything is ok
+ * !=0, on error
+ */
+static int __init skge_init_module(void)
+{
+ int cards;
+ SkGeRootDev = NULL;
+
+ /* just to avoid warnings ... */
+ debug = 0;
+ options[0] = 0;
+
+ cards = skge_probe();
+ if (cards == 0) {
+ printk("sk98lin: No adapter found.\n");
+ }
+ return cards ? 0 : -ENODEV;
+} /* skge_init_module */
+
+
+/*****************************************************************************
+ *
+ * skge_cleanup_module - module unload function
+ *
+ * Description:
+ * Disable adapter if it is still running, free resources,
+ * free device struct.
+ *
+ * Returns: N/A
+ */
+static void __exit skge_cleanup_module(void)
+{
+DEV_NET *pNet;
+SK_AC *pAC;
+struct SK_NET_DEVICE *next;
+unsigned long Flags;
+SK_EVPARA EvPara;
+
+ while (SkGeRootDev) {
+ pNet = (DEV_NET*) SkGeRootDev->priv;
+ pAC = pNet->pAC;
+ next = pAC->Next;
+
+ netif_stop_queue(SkGeRootDev);
+ SkGeYellowLED(pAC, pAC->IoBase, 0);
+
+ if(pAC->BoardLevel == 2) {
+ /* board is still alive */
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+ EvPara.Para32[0] = 0;
+ EvPara.Para32[1] = -1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+ EvPara.Para32[0] = 1;
+ EvPara.Para32[1] = -1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+ SkEventDispatcher(pAC, pAC->IoBase);
+ /* disable interrupts */
+ SK_OUT32(pAC->IoBase, B0_IMSK, 0);
+ SkGeDeInit(pAC, pAC->IoBase);
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+ pAC->BoardLevel = 0;
+ /* We do NOT check here, if IRQ was pending, of course*/
+ }
+
+ if(pAC->BoardLevel == 1) {
+ /* board is still alive */
+ SkGeDeInit(pAC, pAC->IoBase);
+ pAC->BoardLevel = 0;
+ }
+
+ if ((pAC->GIni.GIMacsFound == 2) && pAC->RlmtNets == 2){
+ unregister_netdev(pAC->dev[1]);
+ kfree(pAC->dev[1]);
+ }
+
+ FreeResources(SkGeRootDev);
+
+ SkGeRootDev->get_stats = NULL;
+ /*
+ * otherwise unregister_netdev calls get_stats with
+ * invalid IO ... :-(
+ */
+ unregister_netdev(SkGeRootDev);
+ kfree(SkGeRootDev);
+ kfree(pAC);
+ SkGeRootDev = next;
+ }
+
+ /* clear proc-dir */
+ remove_proc_entry(pSkRootDir->name, proc_net);
+
+} /* skge_cleanup_module */
+
+module_init(skge_init_module);
+module_exit(skge_cleanup_module);
+#endif
+
+
+/*****************************************************************************
+ *
+ * SkGeBoardInit - do level 0 and 1 initialization
+ *
+ * Description:
+ * This function prepares the board hardware for running. The desriptor
+ * ring is set up, the IRQ is allocated and the configuration settings
+ * are examined.
+ *
+ * Returns:
+ * 0, if everything is ok
+ * !=0, on error
+ */
+static int __init SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC)
+{
+short i;
+unsigned long Flags;
+char *DescrString = "sk98lin: Driver for Linux"; /* this is given to PNMI */
+char *VerStr = VER_STRING;
+#if 0
+int Ret; /* return code of request_irq */
+#endif
+SK_BOOL DualNet;
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("IoBase: %08lX\n", (unsigned long)pAC->IoBase));
+ for (i=0; i<SK_MAX_MACS; i++) {
+ pAC->TxPort[i][0].HwAddr = pAC->IoBase + TxQueueAddr[i][0];
+ pAC->TxPort[i][0].PortIndex = i;
+ pAC->RxPort[i].HwAddr = pAC->IoBase + RxQueueAddr[i];
+ pAC->RxPort[i].PortIndex = i;
+ }
+
+ /* Initialize the mutexes */
+ for (i=0; i<SK_MAX_MACS; i++) {
+ spin_lock_init(&pAC->TxPort[i][0].TxDesRingLock);
+ spin_lock_init(&pAC->RxPort[i].RxDesRingLock);
+ }
+ spin_lock_init(&pAC->SlowPathLock);
+
+ /* level 0 init common modules here */
+
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+ /* Does a RESET on board ...*/
+ if (SkGeInit(pAC, pAC->IoBase, 0) != 0) {
+ printk("HWInit (0) failed.\n");
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+ return(-EAGAIN);
+ }
+ SkI2cInit( pAC, pAC->IoBase, 0);
+ SkEventInit(pAC, pAC->IoBase, 0);
+ SkPnmiInit( pAC, pAC->IoBase, 0);
+ SkAddrInit( pAC, pAC->IoBase, 0);
+ SkRlmtInit( pAC, pAC->IoBase, 0);
+ SkTimerInit(pAC, pAC->IoBase, 0);
+
+ pAC->BoardLevel = 0;
+ pAC->RxBufSize = ETH_BUF_SIZE;
+
+ SK_PNMI_SET_DRIVER_DESCR(pAC, DescrString);
+ SK_PNMI_SET_DRIVER_VER(pAC, VerStr);
+
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+
+ /* level 1 init common modules here (HW init) */
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+ if (SkGeInit(pAC, pAC->IoBase, 1) != 0) {
+ printk("HWInit (1) failed.\n");
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+ return(-EAGAIN);
+ }
+ SkI2cInit( pAC, pAC->IoBase, 1);
+ SkEventInit(pAC, pAC->IoBase, 1);
+ SkPnmiInit( pAC, pAC->IoBase, 1);
+ SkAddrInit( pAC, pAC->IoBase, 1);
+ SkRlmtInit( pAC, pAC->IoBase, 1);
+ SkTimerInit(pAC, pAC->IoBase, 1);
+
+ GetConfiguration(pAC);
+ if (pAC->RlmtNets == 2) {
+ pAC->GIni.GIPortUsage = SK_MUL_LINK;
+ }
+
+ pAC->BoardLevel = 1;
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+
+#if 0
+ if (pAC->GIni.GIMacsFound == 2) {
+ Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
+ } else if (pAC->GIni.GIMacsFound == 1) {
+ Ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ,
+ pAC->Name, dev);
+ } else {
+ printk(KERN_WARNING "%s: Illegal number of ports: %d\n",
+ dev->name, pAC->GIni.GIMacsFound);
+ return -EAGAIN;
+ }
+
+ if (Ret) {
+ printk(KERN_WARNING "%s: Requested IRQ %d is busy.\n",
+ dev->name, dev->irq);
+ return -EAGAIN;
+ }
+#endif
+ pAC->AllocFlag |= SK_ALLOC_IRQ;
+
+ /* Alloc memory for this board (Mem for RxD/TxD) : */
+ if(!BoardAllocMem(pAC)) {
+ printk("No memory for descriptor rings.\n");
+ return(-EAGAIN);
+ }
+
+ SkCsSetReceiveFlags(pAC,
+ SKCS_PROTO_IP | SKCS_PROTO_TCP | SKCS_PROTO_UDP,
+ &pAC->CsOfs1, &pAC->CsOfs2, 0);
+ pAC->CsOfs = (pAC->CsOfs2 << 16) | pAC->CsOfs1;
+
+ BoardInitMem(pAC);
+#if 0
+ SetQueueSizes(pAC);
+#else
+ /* tschilling: New common function with minimum size check. */
+ DualNet = SK_FALSE;
+ if (pAC->RlmtNets == 2) {
+ DualNet = SK_TRUE;
+ }
+
+ if (SkGeInitAssignRamToQueues(
+ pAC,
+ pAC->ActivePort,
+ DualNet)) {
+ BoardFreeMem(pAC);
+ printk("SkGeInitAssignRamToQueues failed.\n");
+ return(-EAGAIN);
+ }
+#endif
+
+ /* Print adapter specific string from vpd */
+ ProductStr(pAC);
+#ifdef SK98_INFO
+ printk("%s: %s\n", dev->name, pAC->DeviceStr);
+
+ /* Print configuration settings */
+ printk(" PrefPort:%c RlmtMode:%s\n",
+ 'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber,
+ (pAC->RlmtMode==0) ? "Check Link State" :
+ ((pAC->RlmtMode==1) ? "Check Link State" :
+ ((pAC->RlmtMode==3) ? "Check Local Port" :
+ ((pAC->RlmtMode==7) ? "Check Segmentation" :
+ ((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error")))));
+#endif
+
+ SkGeYellowLED(pAC, pAC->IoBase, 1);
+
+ /*
+ * Register the device here
+ */
+ pAC->Next = SkGeRootDev;
+ SkGeRootDev = dev;
+
+ return (0);
+} /* SkGeBoardInit */
+
+
+/*****************************************************************************
+ *
+ * BoardAllocMem - allocate the memory for the descriptor rings
+ *
+ * Description:
+ * This function allocates the memory for all descriptor rings.
+ * Each ring is aligned for the desriptor alignment and no ring
+ * has a 4 GByte boundary in it (because the upper 32 bit must
+ * be constant for all descriptiors in one rings).
+ *
+ * Returns:
+ * SK_TRUE, if all memory could be allocated
+ * SK_FALSE, if not
+ */
+static SK_BOOL BoardAllocMem(
+SK_AC *pAC)
+{
+caddr_t pDescrMem; /* pointer to descriptor memory area */
+size_t AllocLength; /* length of complete descriptor area */
+int i; /* loop counter */
+unsigned long BusAddr;
+
+
+ /* rings plus one for alignment (do not cross 4 GB boundary) */
+ /* RX_RING_SIZE is assumed bigger than TX_RING_SIZE */
+#if (BITS_PER_LONG == 32)
+ AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8;
+#else
+ AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound
+ + RX_RING_SIZE + 8;
+#endif
+
+ pDescrMem = pci_alloc_consistent(pAC->PciDev, AllocLength,
+ &pAC->pDescrMemDMA);
+
+ if (pDescrMem == NULL) {
+ return (SK_FALSE);
+ }
+ pAC->pDescrMem = pDescrMem;
+ BusAddr = (unsigned long) pAC->pDescrMemDMA;
+
+ /* Descriptors need 8 byte alignment, and this is ensured
+ * by pci_alloc_consistent.
+ */
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
+ ("TX%d/A: pDescrMem: %lX, PhysDescrMem: %lX\n",
+ i, (unsigned long) pDescrMem,
+ BusAddr));
+ pAC->TxPort[i][0].pTxDescrRing = pDescrMem;
+ pAC->TxPort[i][0].VTxDescrRing = BusAddr;
+ pDescrMem += TX_RING_SIZE;
+ BusAddr += TX_RING_SIZE;
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
+ ("RX%d: pDescrMem: %lX, PhysDescrMem: %lX\n",
+ i, (unsigned long) pDescrMem,
+ (unsigned long)BusAddr));
+ pAC->RxPort[i].pRxDescrRing = pDescrMem;
+ pAC->RxPort[i].VRxDescrRing = BusAddr;
+ pDescrMem += RX_RING_SIZE;
+ BusAddr += RX_RING_SIZE;
+ } /* for */
+
+ return (SK_TRUE);
+} /* BoardAllocMem */
+
+
+/****************************************************************************
+ *
+ * BoardFreeMem - reverse of BoardAllocMem
+ *
+ * Description:
+ * Free all memory allocated in BoardAllocMem: adapter context,
+ * descriptor rings, locks.
+ *
+ * Returns: N/A
+ */
+static void BoardFreeMem(
+SK_AC *pAC)
+{
+size_t AllocLength; /* length of complete descriptor area */
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("BoardFreeMem\n"));
+#if (BITS_PER_LONG == 32)
+ AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8;
+#else
+ AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound
+ + RX_RING_SIZE + 8;
+#endif
+
+ pci_free_consistent(pAC->PciDev, AllocLength,
+ pAC->pDescrMem, pAC->pDescrMemDMA);
+ pAC->pDescrMem = NULL;
+} /* BoardFreeMem */
+
+
+/*****************************************************************************
+ *
+ * BoardInitMem - initiate the descriptor rings
+ *
+ * Description:
+ * This function sets the descriptor rings up in memory.
+ * The adapter is initialized with the descriptor start addresses.
+ *
+ * Returns: N/A
+ */
+static void BoardInitMem(
+SK_AC *pAC) /* pointer to adapter context */
+{
+int i; /* loop counter */
+int RxDescrSize; /* the size of a rx descriptor rounded up to alignment*/
+int TxDescrSize; /* the size of a tx descriptor rounded up to alignment*/
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("BoardInitMem\n"));
+
+ RxDescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN;
+ pAC->RxDescrPerRing = RX_RING_SIZE / RxDescrSize;
+ TxDescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN;
+ pAC->TxDescrPerRing = TX_RING_SIZE / RxDescrSize;
+
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ SetupRing(
+ pAC,
+ pAC->TxPort[i][0].pTxDescrRing,
+ pAC->TxPort[i][0].VTxDescrRing,
+ (RXD**)&pAC->TxPort[i][0].pTxdRingHead,
+ (RXD**)&pAC->TxPort[i][0].pTxdRingTail,
+ (RXD**)&pAC->TxPort[i][0].pTxdRingPrev,
+ &pAC->TxPort[i][0].TxdRingFree,
+ SK_TRUE);
+ SetupRing(
+ pAC,
+ pAC->RxPort[i].pRxDescrRing,
+ pAC->RxPort[i].VRxDescrRing,
+ &pAC->RxPort[i].pRxdRingHead,
+ &pAC->RxPort[i].pRxdRingTail,
+ &pAC->RxPort[i].pRxdRingPrev,
+ &pAC->RxPort[i].RxdRingFree,
+ SK_FALSE);
+ }
+} /* BoardInitMem */
+
+
+/*****************************************************************************
+ *
+ * SetupRing - create one descriptor ring
+ *
+ * Description:
+ * This function creates one descriptor ring in the given memory area.
+ * The head, tail and number of free descriptors in the ring are set.
+ *
+ * Returns:
+ * none
+ */
+static void SetupRing(
+SK_AC *pAC,
+void *pMemArea, /* a pointer to the memory area for the ring */
+uintptr_t VMemArea, /* the virtual bus address of the memory area */
+RXD **ppRingHead, /* address where the head should be written */
+RXD **ppRingTail, /* address where the tail should be written */
+RXD **ppRingPrev, /* address where the tail should be written */
+int *pRingFree, /* address where the # of free descr. goes */
+SK_BOOL IsTx) /* flag: is this a tx ring */
+{
+int i; /* loop counter */
+int DescrSize; /* the size of a descriptor rounded up to alignment*/
+int DescrNum; /* number of descriptors per ring */
+RXD *pDescr; /* pointer to a descriptor (receive or transmit) */
+RXD *pNextDescr; /* pointer to the next descriptor */
+RXD *pPrevDescr; /* pointer to the previous descriptor */
+uintptr_t VNextDescr; /* the virtual bus address of the next descriptor */
+
+ if (IsTx == SK_TRUE) {
+ DescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) *
+ DESCR_ALIGN;
+ DescrNum = TX_RING_SIZE / DescrSize;
+ } else {
+ DescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) *
+ DESCR_ALIGN;
+ DescrNum = RX_RING_SIZE / DescrSize;
+ }
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
+ ("Descriptor size: %d Descriptor Number: %d\n",
+ DescrSize,DescrNum));
+
+ pDescr = (RXD*) pMemArea;
+ pPrevDescr = NULL;
+ pNextDescr = (RXD*) (((char*)pDescr) + DescrSize);
+ VNextDescr = VMemArea + DescrSize;
+ for(i=0; i<DescrNum; i++) {
+ /* set the pointers right */
+ pDescr->VNextRxd = VNextDescr & 0xffffffffULL;
+ pDescr->pNextRxd = pNextDescr;
+ pDescr->TcpSumStarts = pAC->CsOfs;
+
+ /* advance one step */
+ pPrevDescr = pDescr;
+ pDescr = pNextDescr;
+ pNextDescr = (RXD*) (((char*)pDescr) + DescrSize);
+ VNextDescr += DescrSize;
+ }
+ pPrevDescr->pNextRxd = (RXD*) pMemArea;
+ pPrevDescr->VNextRxd = VMemArea;
+ pDescr = (RXD*) pMemArea;
+ *ppRingHead = (RXD*) pMemArea;
+ *ppRingTail = *ppRingHead;
+ *ppRingPrev = pPrevDescr;
+ *pRingFree = DescrNum;
+} /* SetupRing */
+
+
+/*****************************************************************************
+ *
+ * PortReInitBmu - re-initiate the descriptor rings for one port
+ *
+ * Description:
+ * This function reinitializes the descriptor rings of one port
+ * in memory. The port must be stopped before.
+ * The HW is initialized with the descriptor start addresses.
+ *
+ * Returns:
+ * none
+ */
+static void PortReInitBmu(
+SK_AC *pAC, /* pointer to adapter context */
+int PortIndex) /* index of the port for which to re-init */
+{
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("PortReInitBmu "));
+
+ /* set address of first descriptor of ring in BMU */
+ SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+
+ TX_Q_CUR_DESCR_LOW,
+ (uint32_t)(((caddr_t)
+ (pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) -
+ pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing +
+ pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) &
+ 0xFFFFFFFF));
+ SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+
+ TX_Q_DESCR_HIGH,
+ (uint32_t)(((caddr_t)
+ (pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) -
+ pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing +
+ pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) >> 32));
+ SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+RX_Q_CUR_DESCR_LOW,
+ (uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) -
+ pAC->RxPort[PortIndex].pRxDescrRing +
+ pAC->RxPort[PortIndex].VRxDescrRing) & 0xFFFFFFFF));
+ SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+RX_Q_DESCR_HIGH,
+ (uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) -
+ pAC->RxPort[PortIndex].pRxDescrRing +
+ pAC->RxPort[PortIndex].VRxDescrRing) >> 32));
+} /* PortReInitBmu */
+
+
+/****************************************************************************
+ *
+ * SkGeIsr - handle adapter interrupts
+ *
+ * Description:
+ * The interrupt routine is called when the network adapter
+ * generates an interrupt. It may also be called if another device
+ * shares this interrupt vector with the driver.
+ *
+ * Returns: N/A
+ *
+ */
+#if 0
+static void SkGeIsr(int irq, void *dev_id, struct pt_regs *ptregs)
+#else
+void SkGeIsr(int irq, void *dev_id, struct pt_regs *ptregs)
+#endif
+{
+struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id;
+DEV_NET *pNet;
+SK_AC *pAC;
+SK_U32 IntSrc; /* interrupts source register contents */
+
+ pNet = (DEV_NET*) dev->priv;
+ pAC = pNet->pAC;
+
+ /*
+ * Check and process if its our interrupt
+ */
+ SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc);
+ if (IntSrc == 0) {
+ return;
+ }
+
+ while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) {
+#if 0 /* software irq currently not used */
+ if (IntSrc & IRQ_SW) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_INT_SRC,
+ ("Software IRQ\n"));
+ }
+#endif
+ if (IntSrc & IRQ_EOF_RX1) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_INT_SRC,
+ ("EOF RX1 IRQ\n"));
+ ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
+ SK_PNMI_CNT_RX_INTR(pAC, 0);
+ }
+ if (IntSrc & IRQ_EOF_RX2) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_INT_SRC,
+ ("EOF RX2 IRQ\n"));
+ ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE);
+ SK_PNMI_CNT_RX_INTR(pAC, 1);
+ }
+#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
+ if (IntSrc & IRQ_EOF_AS_TX1) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_INT_SRC,
+ ("EOF AS TX1 IRQ\n"));
+ SK_PNMI_CNT_TX_INTR(pAC, 0);
+ spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
+ FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]);
+ spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
+ }
+ if (IntSrc & IRQ_EOF_AS_TX2) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_INT_SRC,
+ ("EOF AS TX2 IRQ\n"));
+ SK_PNMI_CNT_TX_INTR(pAC, 1);
+ spin_lock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock);
+ FreeTxDescriptors(pAC, &pAC->TxPort[1][TX_PRIO_LOW]);
+ spin_unlock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock);
+ }
+#if 0 /* only if sync. queues used */
+ if (IntSrc & IRQ_EOF_SY_TX1) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_INT_SRC,
+ ("EOF SY TX1 IRQ\n"));
+ SK_PNMI_CNT_TX_INTR(pAC, 1);
+ spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
+ FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH);
+ spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
+ ClearTxIrq(pAC, 0, TX_PRIO_HIGH);
+ }
+ if (IntSrc & IRQ_EOF_SY_TX2) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_INT_SRC,
+ ("EOF SY TX2 IRQ\n"));
+ SK_PNMI_CNT_TX_INTR(pAC, 1);
+ spin_lock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock);
+ FreeTxDescriptors(pAC, 1, TX_PRIO_HIGH);
+ spin_unlock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock);
+ ClearTxIrq(pAC, 1, TX_PRIO_HIGH);
+ }
+#endif
+#endif
+
+ /* do all IO at once */
+ if (IntSrc & IRQ_EOF_RX1)
+ ClearAndStartRx(pAC, 0);
+ if (IntSrc & IRQ_EOF_RX2)
+ ClearAndStartRx(pAC, 1);
+#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
+ if (IntSrc & IRQ_EOF_AS_TX1)
+ ClearTxIrq(pAC, 0, TX_PRIO_LOW);
+ if (IntSrc & IRQ_EOF_AS_TX2)
+ ClearTxIrq(pAC, 1, TX_PRIO_LOW);
+#endif
+ SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc);
+ } /* while (IntSrc & IRQ_MASK != 0) */
+
+ if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC,
+ ("SPECIAL IRQ DP-Cards => %x\n", IntSrc));
+ pAC->CheckQueue = SK_FALSE;
+ spin_lock(&pAC->SlowPathLock);
+ if (IntSrc & SPECIAL_IRQS)
+ SkGeSirqIsr(pAC, pAC->IoBase, IntSrc);
+
+ SkEventDispatcher(pAC, pAC->IoBase);
+ spin_unlock(&pAC->SlowPathLock);
+ }
+ /*
+ * do it all again is case we cleared an interrupt that
+ * came in after handling the ring (OUTs may be delayed
+ * in hardware buffers, but are through after IN)
+ */
+
+ ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
+ ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE);
+
+ if (pAC->CheckQueue) {
+ pAC->CheckQueue = SK_FALSE;
+ spin_lock(&pAC->SlowPathLock);
+ SkEventDispatcher(pAC, pAC->IoBase);
+ spin_unlock(&pAC->SlowPathLock);
+ }
+
+
+ /* IRQ is processed - Enable IRQs again*/
+ SK_OUT32(pAC->IoBase, B0_IMSK, IRQ_MASK);
+
+ return;
+} /* SkGeIsr */
+
+
+/****************************************************************************
+ *
+ * SkGeIsrOnePort - handle adapter interrupts for single port adapter
+ *
+ * Description:
+ * The interrupt routine is called when the network adapter
+ * generates an interrupt. It may also be called if another device
+ * shares this interrupt vector with the driver.
+ * This is the same as above, but handles only one port.
+ *
+ * Returns: N/A
+ *
+ */
+#if 0
+static void SkGeIsrOnePort(int irq, void *dev_id, struct pt_regs *ptregs)
+#else
+void SkGeIsrOnePort(int irq, void *dev_id, struct pt_regs *ptregs)
+#endif
+{
+struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id;
+DEV_NET *pNet;
+SK_AC *pAC;
+SK_U32 IntSrc; /* interrupts source register contents */
+
+ pNet = (DEV_NET*) dev->priv;
+ pAC = pNet->pAC;
+
+ /*
+ * Check and process if its our interrupt
+ */
+ SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc);
+ if (IntSrc == 0) {
+ return;
+ }
+
+ while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) {
+#if 0 /* software irq currently not used */
+ if (IntSrc & IRQ_SW) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_INT_SRC,
+ ("Software IRQ\n"));
+ }
+#endif
+ if (IntSrc & IRQ_EOF_RX1) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_INT_SRC,
+ ("EOF RX1 IRQ\n"));
+ ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
+ SK_PNMI_CNT_RX_INTR(pAC, 0);
+ }
+#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
+ if (IntSrc & IRQ_EOF_AS_TX1) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_INT_SRC,
+ ("EOF AS TX1 IRQ\n"));
+ SK_PNMI_CNT_TX_INTR(pAC, 0);
+ spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
+ FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]);
+ spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
+ }
+#if 0 /* only if sync. queues used */
+ if (IntSrc & IRQ_EOF_SY_TX1) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_INT_SRC,
+ ("EOF SY TX1 IRQ\n"));
+ SK_PNMI_CNT_TX_INTR(pAC, 0);
+ spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
+ FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH);
+ spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
+ ClearTxIrq(pAC, 0, TX_PRIO_HIGH);
+ }
+#endif
+#endif
+
+ /* do all IO at once */
+ if (IntSrc & IRQ_EOF_RX1)
+ ClearAndStartRx(pAC, 0);
+#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
+ if (IntSrc & IRQ_EOF_AS_TX1)
+ ClearTxIrq(pAC, 0, TX_PRIO_LOW);
+#endif
+ SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc);
+ } /* while (IntSrc & IRQ_MASK != 0) */
+
+ if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC,
+ ("SPECIAL IRQ SP-Cards => %x\n", IntSrc));
+ pAC->CheckQueue = SK_FALSE;
+ spin_lock(&pAC->SlowPathLock);
+ if (IntSrc & SPECIAL_IRQS)
+ SkGeSirqIsr(pAC, pAC->IoBase, IntSrc);
+
+ SkEventDispatcher(pAC, pAC->IoBase);
+ spin_unlock(&pAC->SlowPathLock);
+ }
+ /*
+ * do it all again is case we cleared an interrupt that
+ * came in after handling the ring (OUTs may be delayed
+ * in hardware buffers, but are through after IN)
+ */
+ ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
+
+ /* IRQ is processed - Enable IRQs again*/
+ SK_OUT32(pAC->IoBase, B0_IMSK, IRQ_MASK);
+
+ return;
+} /* SkGeIsrOnePort */
+
+
+/****************************************************************************
+ *
+ * SkGeOpen - handle start of initialized adapter
+ *
+ * Description:
+ * This function starts the initialized adapter.
+ * The board level variable is set and the adapter is
+ * brought to full functionality.
+ * The device flags are set for operation.
+ * Do all necessary level 2 initialization, enable interrupts and
+ * give start command to RLMT.
+ *
+ * Returns:
+ * 0 on success
+ * != 0 on error
+ */
+#if 0
+static int SkGeOpen(
+#else
+int SkGeOpen(
+#endif
+struct SK_NET_DEVICE *dev)
+{
+ DEV_NET *pNet;
+ SK_AC *pAC;
+ unsigned long Flags; /* for spin lock */
+ int i;
+ SK_EVPARA EvPara; /* an event parameter union */
+
+ pNet = (DEV_NET*) dev->priv;
+ pAC = pNet->pAC;
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("SkGeOpen: pAC=0x%lX:\n", (unsigned long)pAC));
+
+ if (pAC->BoardLevel == 0) {
+ /* level 1 init common modules here */
+ if (SkGeInit(pAC, pAC->IoBase, 1) != 0) {
+ printk("%s: HWInit (1) failed.\n", pAC->dev[pNet->PortNr]->name);
+ return (-1);
+ }
+ SkI2cInit (pAC, pAC->IoBase, 1);
+ SkEventInit (pAC, pAC->IoBase, 1);
+ SkPnmiInit (pAC, pAC->IoBase, 1);
+ SkAddrInit (pAC, pAC->IoBase, 1);
+ SkRlmtInit (pAC, pAC->IoBase, 1);
+ SkTimerInit (pAC, pAC->IoBase, 1);
+ pAC->BoardLevel = 1;
+ }
+
+ if (pAC->BoardLevel != 2) {
+ /* tschilling: Level 2 init modules here, check return value. */
+ if (SkGeInit(pAC, pAC->IoBase, 2) != 0) {
+ printk("%s: HWInit (2) failed.\n", pAC->dev[pNet->PortNr]->name);
+ return (-1);
+ }
+ SkI2cInit (pAC, pAC->IoBase, 2);
+ SkEventInit (pAC, pAC->IoBase, 2);
+ SkPnmiInit (pAC, pAC->IoBase, 2);
+ SkAddrInit (pAC, pAC->IoBase, 2);
+ SkRlmtInit (pAC, pAC->IoBase, 2);
+ SkTimerInit (pAC, pAC->IoBase, 2);
+ pAC->BoardLevel = 2;
+ }
+
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ /* Enable transmit descriptor polling. */
+ SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE);
+ FillRxRing(pAC, &pAC->RxPort[i]);
+ }
+ SkGeYellowLED(pAC, pAC->IoBase, 1);
+
+#ifdef USE_INT_MOD
+/* moderate only TX complete interrupts (these are not time critical) */
+#define IRQ_MOD_MASK (IRQ_EOF_AS_TX1 | IRQ_EOF_AS_TX2)
+ {
+ unsigned long ModBase;
+ ModBase = 53125000 / INTS_PER_SEC;
+ SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase);
+ SK_OUT32(pAC->IoBase, B2_IRQM_MSK, IRQ_MOD_MASK);
+ SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_START);
+ }
+#endif
+
+ /* enable Interrupts */
+ SK_OUT32(pAC->IoBase, B0_IMSK, IRQ_MASK);
+ SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK);
+
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+
+ if ((pAC->RlmtMode != 0) && (pAC->MaxPorts == 0)) {
+ EvPara.Para32[0] = pAC->RlmtNets;
+ EvPara.Para32[1] = -1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS,
+ EvPara);
+ EvPara.Para32[0] = pAC->RlmtMode;
+ EvPara.Para32[1] = 0;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_MODE_CHANGE,
+ EvPara);
+ }
+
+ EvPara.Para32[0] = pNet->NetNr;
+ EvPara.Para32[1] = -1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
+ SkEventDispatcher(pAC, pAC->IoBase);
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+
+ pAC->MaxPorts++;
+ pNet->Up = 1;
+
+ MOD_INC_USE_COUNT;
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("SkGeOpen suceeded\n"));
+
+ return (0);
+} /* SkGeOpen */
+
+
+/****************************************************************************
+ *
+ * SkGeClose - Stop initialized adapter
+ *
+ * Description:
+ * Close initialized adapter.
+ *
+ * Returns:
+ * 0 - on success
+ * error code - on error
+ */
+#if 0
+static int SkGeClose(
+#else
+int SkGeClose(
+#endif
+struct SK_NET_DEVICE *dev)
+{
+ DEV_NET *pNet;
+ SK_AC *pAC;
+
+ unsigned long Flags; /* for spin lock */
+ int i;
+ int PortIdx;
+ SK_EVPARA EvPara;
+
+ netif_stop_queue(dev);
+ pNet = (DEV_NET*) dev->priv;
+ pAC = pNet->pAC;
+
+ if (pAC->RlmtNets == 1)
+ PortIdx = pAC->ActivePort;
+ else
+ PortIdx = pNet->NetNr;
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("SkGeClose: pAC=0x%lX ", (unsigned long)pAC));
+
+ /*
+ * Clear multicast table, promiscuous mode ....
+ */
+ SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0);
+ SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
+ SK_PROM_MODE_NONE);
+
+ if (pAC->MaxPorts == 1) {
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+ /* disable interrupts */
+ SK_OUT32(pAC->IoBase, B0_IMSK, 0);
+ EvPara.Para32[0] = pNet->NetNr;
+ EvPara.Para32[1] = -1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+ SkEventDispatcher(pAC, pAC->IoBase);
+ SK_OUT32(pAC->IoBase, B0_IMSK, 0);
+ /* stop the hardware */
+ SkGeDeInit(pAC, pAC->IoBase);
+ pAC->BoardLevel = 0;
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+ } else {
+
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+ EvPara.Para32[0] = pNet->NetNr;
+ EvPara.Para32[1] = -1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+ SkEventDispatcher(pAC, pAC->IoBase);
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+
+ /* Stop port */
+ spin_lock_irqsave(&pAC->TxPort[pNet->PortNr]
+ [TX_PRIO_LOW].TxDesRingLock, Flags);
+ SkGeStopPort(pAC, pAC->IoBase, pNet->PortNr,
+ SK_STOP_ALL, SK_HARD_RST);
+ spin_unlock_irqrestore(&pAC->TxPort[pNet->PortNr]
+ [TX_PRIO_LOW].TxDesRingLock, Flags);
+ }
+
+ if (pAC->RlmtNets == 1) {
+ /* clear all descriptor rings */
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE);
+ ClearRxRing(pAC, &pAC->RxPort[i]);
+ ClearTxRing(pAC, &pAC->TxPort[i][TX_PRIO_LOW]);
+ }
+ } else {
+ /* clear port descriptor rings */
+ ReceiveIrq(pAC, &pAC->RxPort[pNet->PortNr], SK_TRUE);
+ ClearRxRing(pAC, &pAC->RxPort[pNet->PortNr]);
+ ClearTxRing(pAC, &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW]);
+ }
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("SkGeClose: done "));
+
+ pAC->MaxPorts--;
+ pNet->Up = 0;
+ MOD_DEC_USE_COUNT;
+
+ return (0);
+} /* SkGeClose */
+
+
+/*****************************************************************************
+ *
+ * SkGeXmit - Linux frame transmit function
+ *
+ * Description:
+ * The system calls this function to send frames onto the wire.
+ * It puts the frame in the tx descriptor ring. If the ring is
+ * full then, the 'tbusy' flag is set.
+ *
+ * Returns:
+ * 0, if everything is ok
+ * !=0, on error
+ * WARNING: returning 1 in 'tbusy' case caused system crashes (double
+ * allocated skb's) !!!
+ */
+#if 0
+static int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev)
+#else
+int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev)
+#endif
+{
+DEV_NET *pNet;
+SK_AC *pAC;
+int Rc; /* return code of XmitFrame */
+
+ pNet = (DEV_NET*) dev->priv;
+ pAC = pNet->pAC;
+
+#if 0
+ if ((!skb_shinfo(skb)->nr_frags) ||
+#else
+ if (1 ||
+#endif
+ (pAC->GIni.GIChipId == CHIP_ID_GENESIS)) {
+ /* Don't activate scatter-gather and hardware checksum */
+
+ if (pAC->RlmtNets == 2)
+ Rc = XmitFrame(
+ pAC,
+ &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW],
+ skb);
+ else
+ Rc = XmitFrame(
+ pAC,
+ &pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW],
+ skb);
+ } else {
+#if 0
+ /* scatter-gather and hardware TCP checksumming anabled*/
+ if (pAC->RlmtNets == 2)
+ Rc = XmitFrameSG(
+ pAC,
+ &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW],
+ skb);
+ else
+ Rc = XmitFrameSG(
+ pAC,
+ &pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW],
+ skb);
+#endif
+ }
+
+ /* Transmitter out of resources? */
+ if (Rc <= 0) {
+ netif_stop_queue(dev);
+ }
+
+ /* If not taken, give buffer ownership back to the
+ * queueing layer.
+ */
+ if (Rc < 0)
+ return (1);
+
+#if 0
+ dev->trans_start = jiffies;
+#endif
+ return (0);
+} /* SkGeXmit */
+
+
+/*****************************************************************************
+ *
+ * XmitFrame - fill one socket buffer into the transmit ring
+ *
+ * Description:
+ * This function puts a message into the transmit descriptor ring
+ * if there is a descriptors left.
+ * Linux skb's consist of only one continuous buffer.
+ * The first step locks the ring. It is held locked
+ * all time to avoid problems with SWITCH_../PORT_RESET.
+ * Then the descriptoris allocated.
+ * The second part is linking the buffer to the descriptor.
+ * At the very last, the Control field of the descriptor
+ * is made valid for the BMU and a start TX command is given
+ * if necessary.
+ *
+ * Returns:
+ * > 0 - on succes: the number of bytes in the message
+ * = 0 - on resource shortage: this frame sent or dropped, now
+ * the ring is full ( -> set tbusy)
+ * < 0 - on failure: other problems ( -> return failure to upper layers)
+ */
+static int XmitFrame(
+SK_AC *pAC, /* pointer to adapter context */
+TX_PORT *pTxPort, /* pointer to struct of port to send to */
+struct sk_buff *pMessage) /* pointer to send-message */
+{
+TXD *pTxd; /* the rxd to fill */
+unsigned long Flags;
+SK_U64 PhysAddr;
+int BytesSend;
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
+ ("X"));
+
+ spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
+#ifndef USE_TX_COMPLETE
+ FreeTxDescriptors(pAC, pTxPort);
+#endif
+ if (pTxPort->TxdRingFree == 0) {
+ /* no enough free descriptors in ring at the moment */
+ FreeTxDescriptors(pAC, pTxPort);
+ if (pTxPort->TxdRingFree == 0) {
+ spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
+ SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex);
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_TX_PROGRESS,
+ ("XmitFrame failed\n"));
+ /* this message can not be sent now */
+ /* Because tbusy seems to be set, the message should not be freed here */
+ /* It will be used by the scheduler of the ethernet handler */
+ return (-1);
+ }
+ }
+ /* advance head counter behind descriptor needed for this frame */
+ pTxd = pTxPort->pTxdRingHead;
+ pTxPort->pTxdRingHead = pTxd->pNextTxd;
+ pTxPort->TxdRingFree--;
+ /* the needed descriptor is reserved now */
+
+ /*
+ * everything allocated ok, so add buffer to descriptor
+ */
+
+#ifdef SK_DUMP_TX
+ DumpMsg(pMessage, "XmitFrame");
+#endif
+
+ /* set up descriptor and CONTROL dword */
+#if 0
+ PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
+ virt_to_page(pMessage->data),
+ ((unsigned long) pMessage->data &
+ ~PAGE_MASK),
+ pMessage->len,
+ PCI_DMA_TODEVICE);
+#else
+ PhysAddr = (SK_U64) pci_phys_to_mem(pAC->PciDev, (u32) pMessage->data);
+#endif
+ pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff);
+ pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
+ pTxd->pMBuf = pMessage;
+ pTxd->TBControl = TX_CTRL_OWN_BMU | TX_CTRL_STF |
+ TX_CTRL_CHECK_DEFAULT | TX_CTRL_SOFTWARE |
+#ifdef USE_TX_COMPLETE
+ TX_CTRL_EOF | TX_CTRL_EOF_IRQ | pMessage->len;
+#else
+ TX_CTRL_EOF | pMessage->len;
+#endif
+
+ if ((pTxPort->pTxdRingPrev->TBControl & TX_CTRL_OWN_BMU) == 0) {
+ /* previous descriptor already done, so give tx start cmd */
+ /* StartTx(pAC, pTxPort->HwAddr); */
+ SK_OUT8(pTxPort->HwAddr, TX_Q_CTRL, TX_Q_CTRL_START);
+ }
+ pTxPort->pTxdRingPrev = pTxd;
+
+
+ BytesSend = pMessage->len;
+ spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
+ /* after releasing the lock, the skb may be immidiately freed */
+ if (pTxPort->TxdRingFree != 0)
+ return (BytesSend);
+ else
+ return (0);
+
+} /* XmitFrame */
+
+/*****************************************************************************
+ *
+ * XmitFrameSG - fill one socket buffer into the transmit ring
+ * (use SG and TCP/UDP hardware checksumming)
+ *
+ * Description:
+ * This function puts a message into the transmit descriptor ring
+ * if there is a descriptors left.
+ *
+ * Returns:
+ * > 0 - on succes: the number of bytes in the message
+ * = 0 - on resource shortage: this frame sent or dropped, now
+ * the ring is full ( -> set tbusy)
+ * < 0 - on failure: other problems ( -> return failure to upper layers)
+ */
+#if 0
+static int XmitFrameSG(
+SK_AC *pAC, /* pointer to adapter context */
+TX_PORT *pTxPort, /* pointer to struct of port to send to */
+struct sk_buff *pMessage) /* pointer to send-message */
+{
+
+ int i;
+ int BytesSend;
+ int hlength;
+ int protocol;
+ skb_frag_t *sk_frag;
+ TXD *pTxd;
+ TXD *pTxdFst;
+ TXD *pTxdLst;
+ SK_U64 PhysAddr;
+ unsigned long Flags;
+
+ spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
+#ifndef USE_TX_COMPLETE
+ FreeTxDescriptors(pAC, pTxPort);
+#endif
+ if ((skb_shinfo(pMessage)->nr_frags +1) > pTxPort->TxdRingFree) {
+ FreeTxDescriptors(pAC, pTxPort);
+ if ((skb_shinfo(pMessage)->nr_frags + 1) > pTxPort->TxdRingFree) {
+ spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
+ SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex);
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_TX_PROGRESS,
+ ("XmitFrameSG failed - Ring full\n"));
+ /* this message can not be sent now */
+ return(-1);
+ }
+ }
+
+
+ pTxd = pTxPort->pTxdRingHead;
+ pTxdFst = pTxd;
+ pTxdLst = pTxd;
+ BytesSend = 0;
+ protocol = 0;
+
+ /* map first fragment (header) */
+ PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
+ virt_to_page(pMessage->data),
+ ((unsigned long) pMessage->data & ~PAGE_MASK),
+ skb_headlen(pMessage),
+ PCI_DMA_TODEVICE);
+
+ pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff);
+ pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
+
+ /* HW checksum? */
+ if (pMessage->ip_summed == CHECKSUM_HW) {
+ pTxd->TBControl = TX_CTRL_STF |
+ TX_CTRL_ST_FWD |
+ skb_headlen(pMessage);
+
+ /* We have to use the opcode for tcp here because the opcode for
+ udp is not working in the hardware yet (revision 2.0)*/
+ protocol = ((SK_U8)pMessage->data[23] & 0xf);
+ if ((protocol == 17) && (pAC->GIni.GIChipRev != 0))
+ pTxd->TBControl |= BMU_UDP_CHECK;
+ else
+ pTxd->TBControl |= BMU_TCP_CHECK ;
+
+ hlength = ((SK_U8)pMessage->data[14] & 0xf) * 4;
+ pTxd->TcpSumOfs = 0; /* PH-Checksum already claculated */
+ pTxd->TcpSumSt = 14+hlength+16;
+ pTxd->TcpSumWr = 14+hlength;
+
+ } else {
+ pTxd->TBControl = TX_CTRL_CHECK_DEFAULT |
+ TX_CTRL_SOFTWARE |
+ TX_CTRL_STF |
+ skb_headlen(pMessage);
+ }
+
+ pTxd = pTxd->pNextTxd;
+ pTxPort->TxdRingFree--;
+ BytesSend += skb_headlen(pMessage);
+
+
+ /* Map SG fragments */
+ for (i = 0; i < skb_shinfo(pMessage)->nr_frags; i++) {
+ sk_frag = &skb_shinfo(pMessage)->frags[i];
+
+ /* we already have the proper value in entry */
+ PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
+ sk_frag->page,
+ sk_frag->page_offset,
+ sk_frag->size,
+ PCI_DMA_TODEVICE);
+
+ pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff);
+ pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
+ pTxd->pMBuf = pMessage;
+
+ /* HW checksum */
+ if (pMessage->ip_summed == CHECKSUM_HW) {
+ pTxd->TBControl = TX_CTRL_OWN_BMU |
+ TX_CTRL_SOFTWARE |
+ TX_CTRL_ST_FWD;
+
+ /* We have to use the opcode for tcp here because the opcode for
+ udp is not working in the hardware yet (revision 2.0)*/
+ if ((protocol == 17) && (pAC->GIni.GIChipRev != 0))
+ pTxd->TBControl |= BMU_UDP_CHECK ;
+ else
+ pTxd->TBControl |= BMU_TCP_CHECK ;
+
+ } else {
+ pTxd->TBControl = TX_CTRL_CHECK_DEFAULT |
+ TX_CTRL_SOFTWARE |
+ TX_CTRL_OWN_BMU;
+ }
+
+ /* Last fragment */
+ if( (i+1) == skb_shinfo(pMessage)->nr_frags ) {
+#ifdef USE_TX_COMPLETE
+ pTxd->TBControl |= TX_CTRL_EOF |
+ TX_CTRL_EOF_IRQ |
+ sk_frag->size;
+#else
+ pTxd->TBControl |= TX_CTRL_EOF |
+ sk_frag->size;
+#endif
+ pTxdFst->TBControl |= TX_CTRL_OWN_BMU |
+ TX_CTRL_SOFTWARE;
+
+ } else {
+ pTxd->TBControl |= sk_frag->size;
+ }
+ pTxdLst = pTxd;
+ pTxd = pTxd->pNextTxd;
+ pTxPort->TxdRingFree--;
+ BytesSend += sk_frag->size;
+ }
+
+ if ((pTxPort->pTxdRingPrev->TBControl & TX_CTRL_OWN_BMU) == 0) {
+ /* previous descriptor already done, so give tx start cmd */
+ /* StartTx(pAC, pTxPort->HwAddr); */
+ SK_OUT8(pTxPort->HwAddr, TX_Q_CTRL, TX_Q_CTRL_START);
+ }
+
+ pTxPort->pTxdRingPrev = pTxdLst;
+ pTxPort->pTxdRingHead = pTxd;
+
+ spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
+
+ if (pTxPort->TxdRingFree > 0)
+ return (BytesSend);
+ else
+ return (0);
+}
+#endif
+
+
+void dump_frag( SK_U8 *data, int length)
+{
+ int i;
+
+ printk("Length: %d\n", length);
+ for( i=0; i < length; i++ ) {
+ printk(" %02x", (SK_U8)*(data + i) );
+ if( !((i+1) % 20) )
+ printk("\n");
+ }
+ printk("\n\n");
+
+}
+
+
+/*****************************************************************************
+ *
+ * FreeTxDescriptors - release descriptors from the descriptor ring
+ *
+ * Description:
+ * This function releases descriptors from a transmit ring if they
+ * have been sent by the BMU.
+ * If a descriptors is sent, it can be freed and the message can
+ * be freed, too.
+ * The SOFTWARE controllable bit is used to prevent running around a
+ * completely free ring for ever. If this bit is no set in the
+ * frame (by XmitFrame), this frame has never been sent or is
+ * already freed.
+ * The Tx descriptor ring lock must be held while calling this function !!!
+ *
+ * Returns:
+ * none
+ */
+static void FreeTxDescriptors(
+SK_AC *pAC, /* pointer to the adapter context */
+TX_PORT *pTxPort) /* pointer to destination port structure */
+{
+TXD *pTxd; /* pointer to the checked descriptor */
+TXD *pNewTail; /* pointer to 'end' of the ring */
+SK_U32 Control; /* TBControl field of descriptor */
+SK_U64 PhysAddr; /* address of DMA mapping */
+
+ pNewTail = pTxPort->pTxdRingTail;
+ pTxd = pNewTail;
+ /*
+ * loop forever; exits if TX_CTRL_SOFTWARE bit not set in start frame
+ * or TX_CTRL_OWN_BMU bit set in any frame
+ */
+ while (1) {
+ Control = pTxd->TBControl;
+ if ((Control & TX_CTRL_SOFTWARE) == 0) {
+ /*
+ * software controllable bit is set in first
+ * fragment when given to BMU. Not set means that
+ * this fragment was never sent or is already
+ * freed ( -> ring completely free now).
+ */
+ pTxPort->pTxdRingTail = pTxd;
+ netif_wake_queue(pAC->dev[pTxPort->PortIndex]);
+ return;
+ }
+ if (Control & TX_CTRL_OWN_BMU) {
+ pTxPort->pTxdRingTail = pTxd;
+ if (pTxPort->TxdRingFree > 0) {
+ netif_wake_queue(pAC->dev[pTxPort->PortIndex]);
+ }
+ return;
+ }
+
+ /* release the DMA mapping */
+ PhysAddr = ((SK_U64) pTxd->VDataHigh) << (SK_U64) 32;
+ PhysAddr |= (SK_U64) pTxd->VDataLow;
+ pci_unmap_page(pAC->PciDev, PhysAddr,
+ pTxd->pMBuf->len,
+ PCI_DMA_TODEVICE);
+
+ if (Control & TX_CTRL_EOF)
+ DEV_KFREE_SKB_ANY(pTxd->pMBuf); /* free message */
+
+ pTxPort->TxdRingFree++;
+ pTxd->TBControl &= ~TX_CTRL_SOFTWARE;
+ pTxd = pTxd->pNextTxd; /* point behind fragment with EOF */
+ } /* while(forever) */
+} /* FreeTxDescriptors */
+
+/*****************************************************************************
+ *
+ * FillRxRing - fill the receive ring with valid descriptors
+ *
+ * Description:
+ * This function fills the receive ring descriptors with data
+ * segments and makes them valid for the BMU.
+ * The active ring is filled completely, if possible.
+ * The non-active ring is filled only partial to save memory.
+ *
+ * Description of rx ring structure:
+ * head - points to the descriptor which will be used next by the BMU
+ * tail - points to the next descriptor to give to the BMU
+ *
+ * Returns: N/A
+ */
+static void FillRxRing(
+SK_AC *pAC, /* pointer to the adapter context */
+RX_PORT *pRxPort) /* ptr to port struct for which the ring
+ should be filled */
+{
+unsigned long Flags;
+
+ spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags);
+ while (pRxPort->RxdRingFree > pRxPort->RxFillLimit) {
+ if(!FillRxDescriptor(pAC, pRxPort))
+ break;
+ }
+ spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags);
+} /* FillRxRing */
+
+
+/*****************************************************************************
+ *
+ * FillRxDescriptor - fill one buffer into the receive ring
+ *
+ * Description:
+ * The function allocates a new receive buffer and
+ * puts it into the next descriptor.
+ *
+ * Returns:
+ * SK_TRUE - a buffer was added to the ring
+ * SK_FALSE - a buffer could not be added
+ */
+static SK_BOOL FillRxDescriptor(
+SK_AC *pAC, /* pointer to the adapter context struct */
+RX_PORT *pRxPort) /* ptr to port struct of ring to fill */
+{
+struct sk_buff *pMsgBlock; /* pointer to a new message block */
+RXD *pRxd; /* the rxd to fill */
+SK_U16 Length; /* data fragment length */
+SK_U64 PhysAddr; /* physical address of a rx buffer */
+
+ pMsgBlock = alloc_skb(pAC->RxBufSize, GFP_ATOMIC);
+ if (pMsgBlock == NULL) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_ENTRY,
+ ("%s: Allocation of rx buffer failed !\n",
+ pAC->dev[pRxPort->PortIndex]->name));
+ SK_PNMI_CNT_NO_RX_BUF(pAC, pRxPort->PortIndex);
+ return(SK_FALSE);
+ }
+ skb_reserve(pMsgBlock, 2); /* to align IP frames */
+ /* skb allocated ok, so add buffer */
+ pRxd = pRxPort->pRxdRingTail;
+ pRxPort->pRxdRingTail = pRxd->pNextRxd;
+ pRxPort->RxdRingFree--;
+ Length = pAC->RxBufSize;
+#if 0
+ PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
+ virt_to_page(pMsgBlock->data),
+ ((unsigned long) pMsgBlock->data &
+ ~PAGE_MASK),
+ pAC->RxBufSize - 2,
+ PCI_DMA_FROMDEVICE);
+#else
+ PhysAddr = (SK_U64) pci_phys_to_mem(pAC->PciDev, (u32)pMsgBlock->data);
+#endif
+ pRxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff);
+ pRxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
+ pRxd->pMBuf = pMsgBlock;
+ pRxd->RBControl = RX_CTRL_OWN_BMU | RX_CTRL_STF |
+ RX_CTRL_EOF_IRQ | RX_CTRL_CHECK_CSUM | Length;
+ return (SK_TRUE);
+
+} /* FillRxDescriptor */
+
+
+/*****************************************************************************
+ *
+ * ReQueueRxBuffer - fill one buffer back into the receive ring
+ *
+ * Description:
+ * Fill a given buffer back into the rx ring. The buffer
+ * has been previously allocated and aligned, and its phys.
+ * address calculated, so this is no more necessary.
+ *
+ * Returns: N/A
+ */
+static void ReQueueRxBuffer(
+SK_AC *pAC, /* pointer to the adapter context struct */
+RX_PORT *pRxPort, /* ptr to port struct of ring to fill */
+struct sk_buff *pMsg, /* pointer to the buffer */
+SK_U32 PhysHigh, /* phys address high dword */
+SK_U32 PhysLow) /* phys address low dword */
+{
+RXD *pRxd; /* the rxd to fill */
+SK_U16 Length; /* data fragment length */
+
+ pRxd = pRxPort->pRxdRingTail;
+ pRxPort->pRxdRingTail = pRxd->pNextRxd;
+ pRxPort->RxdRingFree--;
+ Length = pAC->RxBufSize;
+ pRxd->VDataLow = PhysLow;
+ pRxd->VDataHigh = PhysHigh;
+ pRxd->pMBuf = pMsg;
+ pRxd->RBControl = RX_CTRL_OWN_BMU | RX_CTRL_STF |
+ RX_CTRL_EOF_IRQ | RX_CTRL_CHECK_CSUM | Length;
+ return;
+} /* ReQueueRxBuffer */
+
+
+/*****************************************************************************
+ *
+ * ReceiveIrq - handle a receive IRQ
+ *
+ * Description:
+ * This function is called when a receive IRQ is set.
+ * It walks the receive descriptor ring and sends up all
+ * frames that are complete.
+ *
+ * Returns: N/A
+ */
+#if 0
+static void ReceiveIrq(
+#else
+void ReceiveIrq(
+#endif
+ SK_AC *pAC, /* pointer to adapter context */
+ RX_PORT *pRxPort, /* pointer to receive port struct */
+ SK_BOOL SlowPathLock) /* indicates if SlowPathLock is needed */
+{
+RXD *pRxd; /* pointer to receive descriptors */
+SK_U32 Control; /* control field of descriptor */
+struct sk_buff *pMsg; /* pointer to message holding frame */
+struct sk_buff *pNewMsg; /* pointer to a new message for copying frame */
+int FrameLength; /* total length of received frame */
+SK_MBUF *pRlmtMbuf; /* ptr to a buffer for giving a frame to rlmt */
+SK_EVPARA EvPara; /* an event parameter union */
+unsigned long Flags; /* for spin lock */
+int PortIndex = pRxPort->PortIndex;
+unsigned int Offset;
+unsigned int NumBytes;
+unsigned int ForRlmt;
+SK_BOOL IsBc;
+SK_BOOL IsMc;
+SK_BOOL IsBadFrame; /* Bad frame */
+
+SK_U32 FrameStat;
+unsigned short Csum1;
+unsigned short Csum2;
+unsigned short Type;
+#if 0
+int Result;
+#endif
+SK_U64 PhysAddr;
+
+rx_start:
+ /* do forever; exit if RX_CTRL_OWN_BMU found */
+ for ( pRxd = pRxPort->pRxdRingHead ;
+ pRxPort->RxdRingFree < pAC->RxDescrPerRing ;
+ pRxd = pRxd->pNextRxd,
+ pRxPort->pRxdRingHead = pRxd,
+ pRxPort->RxdRingFree ++) {
+
+ /*
+ * For a better understanding of this loop
+ * Go through every descriptor beginning at the head
+ * Please note: the ring might be completely received so the OWN bit
+ * set is not a good crirteria to leave that loop.
+ * Therefore the RingFree counter is used.
+ * On entry of this loop pRxd is a pointer to the Rxd that needs
+ * to be checked next.
+ */
+
+ Control = pRxd->RBControl;
+
+ /* check if this descriptor is ready */
+ if ((Control & RX_CTRL_OWN_BMU) != 0) {
+ /* this descriptor is not yet ready */
+ /* This is the usual end of the loop */
+ /* We don't need to start the ring again */
+ FillRxRing(pAC, pRxPort);
+ return;
+ }
+
+ /* get length of frame and check it */
+ FrameLength = Control & RX_CTRL_LEN_MASK;
+ if (FrameLength > pAC->RxBufSize) {
+ goto rx_failed;
+ }
+
+ /* check for STF and EOF */
+ if ((Control & (RX_CTRL_STF | RX_CTRL_EOF)) !=
+ (RX_CTRL_STF | RX_CTRL_EOF)) {
+ goto rx_failed;
+ }
+
+ /* here we have a complete frame in the ring */
+ pMsg = pRxd->pMBuf;
+
+ FrameStat = pRxd->FrameStat;
+
+ /* check for frame length mismatch */
+#define XMR_FS_LEN_SHIFT 18
+#define GMR_FS_LEN_SHIFT 16
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+ if (FrameLength != (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_RX_PROGRESS,
+ ("skge: Frame length mismatch (%u/%u).\n",
+ FrameLength,
+ (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)));
+ goto rx_failed;
+ }
+ }
+ else {
+ if (FrameLength != (SK_U32) (FrameStat >> GMR_FS_LEN_SHIFT)) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_RX_PROGRESS,
+ ("skge: Frame length mismatch (%u/%u).\n",
+ FrameLength,
+ (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)));
+ goto rx_failed;
+ }
+ }
+
+ /* Set Rx Status */
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+ IsBc = (FrameStat & XMR_FS_BC) != 0;
+ IsMc = (FrameStat & XMR_FS_MC) != 0;
+ IsBadFrame = (FrameStat &
+ (XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0;
+ } else {
+ IsBc = (FrameStat & GMR_FS_BC) != 0;
+ IsMc = (FrameStat & GMR_FS_MC) != 0;
+ IsBadFrame = (((FrameStat & GMR_FS_ANY_ERR) != 0) ||
+ ((FrameStat & GMR_FS_RX_OK) == 0));
+ }
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0,
+ ("Received frame of length %d on port %d\n",
+ FrameLength, PortIndex));
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0,
+ ("Number of free rx descriptors: %d\n",
+ pRxPort->RxdRingFree));
+/* DumpMsg(pMsg, "Rx"); */
+
+ if ((Control & RX_CTRL_STAT_VALID) != RX_CTRL_STAT_VALID ||
+ (IsBadFrame)) {
+#if 0
+ (FrameStat & (XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0) {
+#endif
+ /* there is a receive error in this frame */
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_RX_PROGRESS,
+ ("skge: Error in received frame, dropped!\n"
+ "Control: %x\nRxStat: %x\n",
+ Control, FrameStat));
+
+ PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
+ PhysAddr |= (SK_U64) pRxd->VDataLow;
+ pci_dma_sync_single(pAC->PciDev,
+ (dma_addr_t) PhysAddr,
+ FrameLength,
+ PCI_DMA_FROMDEVICE);
+ ReQueueRxBuffer(pAC, pRxPort, pMsg,
+ pRxd->VDataHigh, pRxd->VDataLow);
+
+ continue;
+ }
+
+ /*
+ * if short frame then copy data to reduce memory waste
+ */
+ if ((FrameLength < SK_COPY_THRESHOLD) &&
+ ((pNewMsg = alloc_skb(FrameLength+2, GFP_ATOMIC)) != NULL)) {
+ /*
+ * Short frame detected and allocation successfull
+ */
+ /* use new skb and copy data */
+ skb_reserve(pNewMsg, 2);
+ skb_put(pNewMsg, FrameLength);
+ PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
+ PhysAddr |= (SK_U64) pRxd->VDataLow;
+
+ pci_dma_sync_single(pAC->PciDev,
+ (dma_addr_t) PhysAddr,
+ FrameLength,
+ PCI_DMA_FROMDEVICE);
+ eth_copy_and_sum(pNewMsg, pMsg->data,
+ FrameLength, 0);
+ ReQueueRxBuffer(pAC, pRxPort, pMsg,
+ pRxd->VDataHigh, pRxd->VDataLow);
+ pMsg = pNewMsg;
+
+ }
+ else {
+ /*
+ * if large frame, or SKB allocation failed, pass
+ * the SKB directly to the networking
+ */
+
+ PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
+ PhysAddr |= (SK_U64) pRxd->VDataLow;
+
+ /* release the DMA mapping */
+ pci_unmap_single(pAC->PciDev,
+ PhysAddr,
+ pAC->RxBufSize - 2,
+ PCI_DMA_FROMDEVICE);
+
+ /* set length in message */
+ skb_put(pMsg, FrameLength);
+ /* hardware checksum */
+ Type = ntohs(*((short*)&pMsg->data[12]));
+ if (Type == 0x800) {
+ Csum1=le16_to_cpu(pRxd->TcpSums & 0xffff);
+ Csum2=le16_to_cpu((pRxd->TcpSums >> 16) & 0xffff);
+#if 0
+ if ((((Csum1 & 0xfffe) && (Csum2 & 0xfffe)) &&
+ (pAC->GIni.GIChipId == CHIP_ID_GENESIS)) ||
+ (pAC->GIni.GIChipId == CHIP_ID_YUKON)) {
+ Result = SkCsGetReceiveInfo(pAC,
+ &pMsg->data[14],
+ Csum1, Csum2, pRxPort->PortIndex);
+ if (Result ==
+ SKCS_STATUS_IP_FRAGMENT ||
+ Result ==
+ SKCS_STATUS_IP_CSUM_OK ||
+ Result ==
+ SKCS_STATUS_TCP_CSUM_OK ||
+ Result ==
+ SKCS_STATUS_UDP_CSUM_OK) {
+ pMsg->ip_summed =
+ CHECKSUM_UNNECESSARY;
+ } else {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_RX_PROGRESS,
+ ("skge: CRC error. Frame dropped!\n"));
+ goto rx_failed;
+ }
+ }/* checksumControl calculation valid */
+#endif
+ } /* IP frame */
+ } /* frame > SK_COPY_TRESHOLD */
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V"));
+ ForRlmt = SK_RLMT_RX_PROTOCOL;
+#if 0
+ IsBc = (FrameStat & XMR_FS_BC)==XMR_FS_BC;
+#endif
+ SK_RLMT_PRE_LOOKAHEAD(pAC, PortIndex, FrameLength,
+ IsBc, &Offset, &NumBytes);
+ if (NumBytes != 0) {
+#if 0
+ IsMc = (FrameStat & XMR_FS_MC)==XMR_FS_MC;
+#endif
+ SK_RLMT_LOOKAHEAD(pAC, PortIndex,
+ &pMsg->data[Offset],
+ IsBc, IsMc, &ForRlmt);
+ }
+ if (ForRlmt == SK_RLMT_RX_PROTOCOL) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("W"));
+ /* send up only frames from active port */
+ if ((PortIndex == pAC->ActivePort) ||
+ (pAC->RlmtNets == 2)) {
+ /* frame for upper layer */
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("U"));
+#ifdef xDEBUG
+ DumpMsg(pMsg, "Rx");
+#endif
+ SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,
+ FrameLength, pRxPort->PortIndex);
+
+#if 0
+ pMsg->dev = pAC->dev[pRxPort->PortIndex];
+ pMsg->protocol = eth_type_trans(pMsg,
+ pAC->dev[pRxPort->PortIndex]);
+ netif_rx(pMsg);
+ pAC->dev[pRxPort->PortIndex]->last_rx = jiffies;
+#else
+ NetReceive(pMsg->data, pMsg->len);
+ dev_kfree_skb_any(pMsg);
+#endif
+ }
+ else {
+ /* drop frame */
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_RX_PROGRESS,
+ ("D"));
+ DEV_KFREE_SKB(pMsg);
+ }
+
+ } /* if not for rlmt */
+ else {
+ /* packet for rlmt */
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_RX_PROGRESS, ("R"));
+ pRlmtMbuf = SkDrvAllocRlmtMbuf(pAC,
+ pAC->IoBase, FrameLength);
+ if (pRlmtMbuf != NULL) {
+ pRlmtMbuf->pNext = NULL;
+ pRlmtMbuf->Length = FrameLength;
+ pRlmtMbuf->PortIdx = PortIndex;
+ EvPara.pParaPtr = pRlmtMbuf;
+ memcpy((char*)(pRlmtMbuf->pData),
+ (char*)(pMsg->data),
+ FrameLength);
+
+ /* SlowPathLock needed? */
+ if (SlowPathLock == SK_TRUE) {
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+ SkEventQueue(pAC, SKGE_RLMT,
+ SK_RLMT_PACKET_RECEIVED,
+ EvPara);
+ pAC->CheckQueue = SK_TRUE;
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+ } else {
+ SkEventQueue(pAC, SKGE_RLMT,
+ SK_RLMT_PACKET_RECEIVED,
+ EvPara);
+ pAC->CheckQueue = SK_TRUE;
+ }
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+ SK_DBGCAT_DRV_RX_PROGRESS,
+ ("Q"));
+ }
+#if 0
+ if ((pAC->dev[pRxPort->PortIndex]->flags &
+ (IFF_PROMISC | IFF_ALLMULTI)) != 0 ||
+ (ForRlmt & SK_RLMT_RX_PROTOCOL) ==
+ SK_RLMT_RX_PROTOCOL) {
+ pMsg->dev = pAC->dev[pRxPort->PortIndex];
+ pMsg->protocol = eth_type_trans(pMsg,
+ pAC->dev[pRxPort->PortIndex]);
+ netif_rx(pMsg);
+ pAC->dev[pRxPort->PortIndex]->last_rx = jiffies;
+ }
+#else
+ if (0) {
+ }
+#endif
+ else {
+ DEV_KFREE_SKB(pMsg);
+ }
+
+ } /* if packet for rlmt */
+ } /* for ... scanning the RXD ring */
+
+ /* RXD ring is empty -> fill and restart */
+ FillRxRing(pAC, pRxPort);
+ /* do not start if called from Close */
+ if (pAC->BoardLevel > 0) {
+ ClearAndStartRx(pAC, PortIndex);
+ }
+ return;
+
+rx_failed:
+ /* remove error frame */
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR,
+ ("Schrottdescriptor, length: 0x%x\n", FrameLength));
+
+ /* release the DMA mapping */
+
+ PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
+ PhysAddr |= (SK_U64) pRxd->VDataLow;
+ pci_unmap_page(pAC->PciDev,
+ PhysAddr,
+ pAC->RxBufSize - 2,
+ PCI_DMA_FROMDEVICE);
+ DEV_KFREE_SKB_IRQ(pRxd->pMBuf);
+ pRxd->pMBuf = NULL;
+ pRxPort->RxdRingFree++;
+ pRxPort->pRxdRingHead = pRxd->pNextRxd;
+ goto rx_start;
+
+} /* ReceiveIrq */
+
+
+/*****************************************************************************
+ *
+ * ClearAndStartRx - give a start receive command to BMU, clear IRQ
+ *
+ * Description:
+ * This function sends a start command and a clear interrupt
+ * command for one receive queue to the BMU.
+ *
+ * Returns: N/A
+ * none
+ */
+static void ClearAndStartRx(
+SK_AC *pAC, /* pointer to the adapter context */
+int PortIndex) /* index of the receive port (XMAC) */
+{
+ SK_OUT8(pAC->IoBase, RxQueueAddr[PortIndex]+RX_Q_CTRL,
+ RX_Q_CTRL_START | RX_Q_CTRL_CLR_I_EOF);
+} /* ClearAndStartRx */
+
+
+/*****************************************************************************
+ *
+ * ClearTxIrq - give a clear transmit IRQ command to BMU
+ *
+ * Description:
+ * This function sends a clear tx IRQ command for one
+ * transmit queue to the BMU.
+ *
+ * Returns: N/A
+ */
+static void ClearTxIrq(
+SK_AC *pAC, /* pointer to the adapter context */
+int PortIndex, /* index of the transmit port (XMAC) */
+int Prio) /* priority or normal queue */
+{
+ SK_OUT8(pAC->IoBase, TxQueueAddr[PortIndex][Prio]+TX_Q_CTRL,
+ TX_Q_CTRL_CLR_I_EOF);
+} /* ClearTxIrq */
+
+
+/*****************************************************************************
+ *
+ * ClearRxRing - remove all buffers from the receive ring
+ *
+ * Description:
+ * This function removes all receive buffers from the ring.
+ * The receive BMU must be stopped before calling this function.
+ *
+ * Returns: N/A
+ */
+static void ClearRxRing(
+SK_AC *pAC, /* pointer to adapter context */
+RX_PORT *pRxPort) /* pointer to rx port struct */
+{
+RXD *pRxd; /* pointer to the current descriptor */
+unsigned long Flags;
+SK_U64 PhysAddr;
+
+ if (pRxPort->RxdRingFree == pAC->RxDescrPerRing) {
+ return;
+ }
+ spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags);
+ pRxd = pRxPort->pRxdRingHead;
+ do {
+ if (pRxd->pMBuf != NULL) {
+
+ PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
+ PhysAddr |= (SK_U64) pRxd->VDataLow;
+ pci_unmap_page(pAC->PciDev,
+ PhysAddr,
+ pAC->RxBufSize - 2,
+ PCI_DMA_FROMDEVICE);
+ DEV_KFREE_SKB(pRxd->pMBuf);
+ pRxd->pMBuf = NULL;
+ }
+ pRxd->RBControl &= RX_CTRL_OWN_BMU;
+ pRxd = pRxd->pNextRxd;
+ pRxPort->RxdRingFree++;
+ } while (pRxd != pRxPort->pRxdRingTail);
+ pRxPort->pRxdRingTail = pRxPort->pRxdRingHead;
+ spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags);
+} /* ClearRxRing */
+
+
+/*****************************************************************************
+ *
+ * ClearTxRing - remove all buffers from the transmit ring
+ *
+ * Description:
+ * This function removes all transmit buffers from the ring.
+ * The transmit BMU must be stopped before calling this function
+ * and transmitting at the upper level must be disabled.
+ * The BMU own bit of all descriptors is cleared, the rest is
+ * done by calling FreeTxDescriptors.
+ *
+ * Returns: N/A
+ */
+static void ClearTxRing(
+SK_AC *pAC, /* pointer to adapter context */
+TX_PORT *pTxPort) /* pointer to tx prt struct */
+{
+TXD *pTxd; /* pointer to the current descriptor */
+int i;
+unsigned long Flags;
+
+ spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
+ pTxd = pTxPort->pTxdRingHead;
+ for (i=0; i<pAC->TxDescrPerRing; i++) {
+ pTxd->TBControl &= ~TX_CTRL_OWN_BMU;
+ pTxd = pTxd->pNextTxd;
+ }
+ FreeTxDescriptors(pAC, pTxPort);
+ spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
+} /* ClearTxRing */
+
+
+#if 0
+/*****************************************************************************
+ *
+ * SetQueueSizes - configure the sizes of rx and tx queues
+ *
+ * Description:
+ * This function assigns the sizes for active and passive port
+ * to the appropriate HWinit structure variables.
+ * The passive port(s) get standard values, all remaining RAM
+ * is given to the active port.
+ * The queue sizes are in kbyte and must be multiple of 8.
+ * The limits for the number of buffers filled into the rx rings
+ * is also set in this routine.
+ *
+ * Returns:
+ * none
+ */
+static void SetQueueSizes(
+SK_AC *pAC) /* pointer to the adapter context */
+{
+int StandbyRam; /* adapter RAM used for a standby port */
+int RemainingRam; /* adapter RAM available for the active port */
+int RxRam; /* RAM used for the active port receive queue */
+int i; /* loop counter */
+
+if (pAC->RlmtNets == 1) {
+ StandbyRam = SK_RLMT_STANDBY_QRXSIZE + SK_RLMT_STANDBY_QXASIZE +
+ SK_RLMT_STANDBY_QXSSIZE;
+ RemainingRam = pAC->GIni.GIRamSize -
+ (pAC->GIni.GIMacsFound-1) * StandbyRam;
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ pAC->GIni.GP[i].PRxQSize = SK_RLMT_STANDBY_QRXSIZE;
+ pAC->GIni.GP[i].PXSQSize = SK_RLMT_STANDBY_QXSSIZE;
+ pAC->GIni.GP[i].PXAQSize = SK_RLMT_STANDBY_QXASIZE;
+ }
+ RxRam = (RemainingRam * 8 / 10) & ~7;
+ pAC->GIni.GP[pAC->ActivePort].PRxQSize = RxRam;
+ pAC->GIni.GP[pAC->ActivePort].PXSQSize = 0;
+ pAC->GIni.GP[pAC->ActivePort].PXAQSize =
+ (RemainingRam - RxRam) & ~7;
+ pAC->RxQueueSize = RxRam;
+ pAC->TxSQueueSize = 0;
+ pAC->TxAQueueSize = (RemainingRam - RxRam) & ~7;
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("queue sizes settings - rx:%d txA:%d txS:%d\n",
+ pAC->RxQueueSize,pAC->TxAQueueSize, pAC->TxSQueueSize));
+} else {
+ RemainingRam = pAC->GIni.GIRamSize/pAC->GIni.GIMacsFound;
+ RxRam = (RemainingRam * 8 / 10) & ~7;
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ pAC->GIni.GP[i].PRxQSize = RxRam;
+ pAC->GIni.GP[i].PXSQSize = 0;
+ pAC->GIni.GP[i].PXAQSize = (RemainingRam - RxRam) & ~7;
+ }
+
+ pAC->RxQueueSize = RxRam;
+ pAC->TxSQueueSize = 0;
+ pAC->TxAQueueSize = (RemainingRam - RxRam) & ~7;
+}
+ for (i=0; i<SK_MAX_MACS; i++) {
+ pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing;
+ }
+
+ if (pAC->RlmtNets == 2) {
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - 100;
+ }
+ } else {
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - 100;
+ }
+ /*
+ * Do not set the Limit to 0, because this could cause
+ * wrap around with ReQueue'ed buffers (a buffer could
+ * be requeued in the same position, made accessable to
+ * the hardware, and the hardware could change its
+ * contents!
+ */
+ pAC->RxPort[pAC->ActivePort].RxFillLimit = 1;
+ }
+
+#ifdef DEBUG
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
+ ("i: %d, RxQSize: %d, PXSQsize: %d, PXAQSize: %d\n",
+ i,
+ pAC->GIni.GP[i].PRxQSize,
+ pAC->GIni.GP[i].PXSQSize,
+ pAC->GIni.GP[i].PXAQSize));
+ }
+#endif
+} /* SetQueueSizes */
+
+
+/*****************************************************************************
+ *
+ * SkGeSetMacAddr - Set the hardware MAC address
+ *
+ * Description:
+ * This function sets the MAC address used by the adapter.
+ *
+ * Returns:
+ * 0, if everything is ok
+ * !=0, on error
+ */
+static int SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p)
+{
+
+DEV_NET *pNet = (DEV_NET*) dev->priv;
+SK_AC *pAC = pNet->pAC;
+
+struct sockaddr *addr = p;
+unsigned long Flags;
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("SkGeSetMacAddr starts now...\n"));
+ if(netif_running(dev))
+ return -EBUSY;
+
+ memcpy(dev->dev_addr, addr->sa_data,dev->addr_len);
+
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+
+ if (pAC->RlmtNets == 2)
+ SkAddrOverride(pAC, pAC->IoBase, pNet->NetNr,
+ (SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS);
+ else
+ SkAddrOverride(pAC, pAC->IoBase, pAC->ActivePort,
+ (SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS);
+
+
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+ return 0;
+} /* SkGeSetMacAddr */
+#endif
+
+
+/*****************************************************************************
+ *
+ * SkGeSetRxMode - set receive mode
+ *
+ * Description:
+ * This function sets the receive mode of an adapter. The adapter
+ * supports promiscuous mode, allmulticast mode and a number of
+ * multicast addresses. If more multicast addresses the available
+ * are selected, a hash function in the hardware is used.
+ *
+ * Returns:
+ * 0, if everything is ok
+ * !=0, on error
+ */
+#if 0
+static void SkGeSetRxMode(struct SK_NET_DEVICE *dev)
+{
+
+DEV_NET *pNet;
+SK_AC *pAC;
+
+struct dev_mc_list *pMcList;
+int i;
+int PortIdx;
+unsigned long Flags;
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("SkGeSetRxMode starts now... "));
+
+ pNet = (DEV_NET*) dev->priv;
+ pAC = pNet->pAC;
+ if (pAC->RlmtNets == 1)
+ PortIdx = pAC->ActivePort;
+ else
+ PortIdx = pNet->NetNr;
+
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+ if (dev->flags & IFF_PROMISC) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("PROMISCUOUS mode\n"));
+ SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
+ SK_PROM_MODE_LLC);
+ } else if (dev->flags & IFF_ALLMULTI) {
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("ALLMULTI mode\n"));
+ SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
+ SK_PROM_MODE_ALL_MC);
+ } else {
+ SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
+ SK_PROM_MODE_NONE);
+ SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0);
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("Number of MC entries: %d ", dev->mc_count));
+
+ pMcList = dev->mc_list;
+ for (i=0; i<dev->mc_count; i++, pMcList = pMcList->next) {
+ SkAddrMcAdd(pAC, pAC->IoBase, PortIdx,
+ (SK_MAC_ADDR*)pMcList->dmi_addr, 0);
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_MCA,
+ ("%02x:%02x:%02x:%02x:%02x:%02x\n",
+ pMcList->dmi_addr[0],
+ pMcList->dmi_addr[1],
+ pMcList->dmi_addr[2],
+ pMcList->dmi_addr[3],
+ pMcList->dmi_addr[4],
+ pMcList->dmi_addr[5]));
+ }
+ SkAddrMcUpdate(pAC, pAC->IoBase, PortIdx);
+ }
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+
+ return;
+} /* SkGeSetRxMode */
+
+
+/*****************************************************************************
+ *
+ * SkGeChangeMtu - set the MTU to another value
+ *
+ * Description:
+ * This function sets is called whenever the MTU size is changed
+ * (ifconfig mtu xxx dev ethX). If the MTU is bigger than standard
+ * ethernet MTU size, long frame support is activated.
+ *
+ * Returns:
+ * 0, if everything is ok
+ * !=0, on error
+ */
+static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int NewMtu)
+{
+DEV_NET *pNet;
+DEV_NET *pOtherNet;
+SK_AC *pAC;
+unsigned long Flags;
+int i;
+SK_EVPARA EvPara;
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("SkGeChangeMtu starts now...\n"));
+
+ pNet = (DEV_NET*) dev->priv;
+ pAC = pNet->pAC;
+
+ if ((NewMtu < 68) || (NewMtu > SK_JUMBO_MTU)) {
+ return -EINVAL;
+ }
+
+ if(pAC->BoardLevel != 2) {
+ return -EINVAL;
+ }
+
+ pNet->Mtu = NewMtu;
+ pOtherNet = (DEV_NET*)pAC->dev[1 - pNet->NetNr]->priv;
+ if ((pOtherNet->Mtu > 1500) && (NewMtu <= 1500) && (pOtherNet->Up==1)) {
+ return(0);
+ }
+
+ EvPara.Para32[0] = pNet->NetNr;
+ EvPara.Para32[1] = -1;
+
+ pAC->RxBufSize = NewMtu + 32;
+ dev->mtu = NewMtu;
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("New MTU: %d\n", NewMtu));
+
+ /* prevent reconfiguration while changing the MTU */
+
+ /* disable interrupts */
+ SK_OUT32(pAC->IoBase, B0_IMSK, 0);
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+
+ /* Found more than one port */
+ if ((pAC->GIni.GIMacsFound == 2 ) &&
+ (pAC->RlmtNets == 2)) {
+ /* Stop both ports */
+ EvPara.Para32[0] = 0;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+ EvPara.Para32[0] = 1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+ } else {
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+ }
+
+ SkEventDispatcher(pAC, pAC->IoBase);
+
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ spin_lock_irqsave(
+ &pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock, Flags);
+ netif_stop_queue(pAC->dev[i]);
+
+ }
+
+ /*
+ * adjust number of rx buffers allocated
+ */
+ if (NewMtu > 1500) {
+ /* use less rx buffers */
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ /* Found more than one port */
+ if ((pAC->GIni.GIMacsFound == 2 ) &&
+ (pAC->RlmtNets == 2)) {
+ pAC->RxPort[i].RxFillLimit =
+ pAC->RxDescrPerRing - 100;
+ } else {
+ if (i == pAC->ActivePort)
+ pAC->RxPort[i].RxFillLimit =
+ pAC->RxDescrPerRing - 100;
+ else
+ pAC->RxPort[i].RxFillLimit =
+ pAC->RxDescrPerRing - 10;
+ }
+ }
+ }
+ else {
+ /* use normal amount of rx buffers */
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ /* Found more than one port */
+ if ((pAC->GIni.GIMacsFound == 2 ) &&
+ (pAC->RlmtNets == 2)) {
+ pAC->RxPort[i].RxFillLimit = 1;
+ } else {
+ if (i == pAC->ActivePort)
+ pAC->RxPort[i].RxFillLimit = 1;
+ else
+ pAC->RxPort[i].RxFillLimit =
+ pAC->RxDescrPerRing - 100;
+ }
+ }
+ }
+
+ SkGeDeInit(pAC, pAC->IoBase);
+
+ /*
+ * enable/disable hardware support for long frames
+ */
+ if (NewMtu > 1500) {
+/* pAC->JumboActivated = SK_TRUE; /#* is never set back !!! */
+ pAC->GIni.GIPortUsage = SK_JUMBO_LINK;
+ }
+ else {
+ if ((pAC->GIni.GIMacsFound == 2 ) &&
+ (pAC->RlmtNets == 2)) {
+ pAC->GIni.GIPortUsage = SK_MUL_LINK;
+ } else {
+ pAC->GIni.GIPortUsage = SK_RED_LINK;
+ }
+ }
+
+ SkGeInit( pAC, pAC->IoBase, 1);
+ SkI2cInit( pAC, pAC->IoBase, 1);
+ SkEventInit(pAC, pAC->IoBase, 1);
+ SkPnmiInit( pAC, pAC->IoBase, 1);
+ SkAddrInit( pAC, pAC->IoBase, 1);
+ SkRlmtInit( pAC, pAC->IoBase, 1);
+ SkTimerInit(pAC, pAC->IoBase, 1);
+
+ /*
+ * tschilling:
+ * Speed and others are set back to default in level 1 init!
+ */
+ GetConfiguration(pAC);
+
+ SkGeInit( pAC, pAC->IoBase, 2);
+ SkI2cInit( pAC, pAC->IoBase, 2);
+ SkEventInit(pAC, pAC->IoBase, 2);
+ SkPnmiInit( pAC, pAC->IoBase, 2);
+ SkAddrInit( pAC, pAC->IoBase, 2);
+ SkRlmtInit( pAC, pAC->IoBase, 2);
+ SkTimerInit(pAC, pAC->IoBase, 2);
+
+ /*
+ * clear and reinit the rx rings here
+ */
+ for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+ ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE);
+ ClearRxRing(pAC, &pAC->RxPort[i]);
+ FillRxRing(pAC, &pAC->RxPort[i]);
+
+ /* Enable transmit descriptor polling. */
+ SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE);
+ FillRxRing(pAC, &pAC->RxPort[i]);
+ };
+
+ SkGeYellowLED(pAC, pAC->IoBase, 1);
+
+#ifdef USE_INT_MOD
+ {
+ unsigned long ModBase;
+ ModBase = 53125000 / INTS_PER_SEC;
+ SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase);
+ SK_OUT32(pAC->IoBase, B2_IRQM_MSK, IRQ_MOD_MASK);
+ SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_START);
+ }
+#endif
+
+ netif_start_queue(pAC->dev[pNet->PortNr]);
+ for (i=pAC->GIni.GIMacsFound-1; i>=0; i--) {
+ spin_unlock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock);
+ }
+
+ /* enable Interrupts */
+ SK_OUT32(pAC->IoBase, B0_IMSK, IRQ_MASK);
+ SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK);
+
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
+ SkEventDispatcher(pAC, pAC->IoBase);
+
+ /* Found more than one port */
+ if ((pAC->GIni.GIMacsFound == 2 ) &&
+ (pAC->RlmtNets == 2)) {
+ /* Start both ports */
+ EvPara.Para32[0] = pAC->RlmtNets;
+ EvPara.Para32[1] = -1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS,
+ EvPara);
+
+
+ EvPara.Para32[1] = -1;
+ EvPara.Para32[0] = pNet->PortNr;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
+
+ if (pOtherNet->Up) {
+ EvPara.Para32[0] = pOtherNet->PortNr;
+ SkEventQueue(pAC, SKGE_RLMT,
+ SK_RLMT_START, EvPara);
+ }
+ } else {
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
+ }
+
+ SkEventDispatcher(pAC, pAC->IoBase);
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+
+ return 0;
+} /* SkGeChangeMtu */
+
+
+/*****************************************************************************
+ *
+ * SkGeStats - return ethernet device statistics
+ *
+ * Description:
+ * This function return statistic data about the ethernet device
+ * to the operating system.
+ *
+ * Returns:
+ * pointer to the statistic structure.
+ */
+static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev)
+{
+DEV_NET *pNet = (DEV_NET*) dev->priv;
+SK_AC *pAC = pNet->pAC;
+SK_PNMI_STRUCT_DATA *pPnmiStruct; /* structure for all Pnmi-Data */
+SK_PNMI_STAT *pPnmiStat; /* pointer to virtual XMAC stat. data */
+SK_PNMI_CONF *pPnmiConf; /* pointer to virtual link config. */
+unsigned int Size; /* size of pnmi struct */
+unsigned long Flags; /* for spin lock */
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("SkGeStats starts now...\n"));
+ pPnmiStruct = &pAC->PnmiStruct;
+ memset(pPnmiStruct, 0, sizeof(SK_PNMI_STRUCT_DATA));
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+ Size = SK_PNMI_STRUCT_SIZE;
+ SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, pNet->NetNr);
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+ pPnmiStat = &pPnmiStruct->Stat[0];
+ pPnmiConf = &pPnmiStruct->Conf[0];
+
+ pAC->stats.rx_packets = (SK_U32) pPnmiStruct->RxDeliveredCts & 0xFFFFFFFF;
+ pAC->stats.tx_packets = (SK_U32) pPnmiStat->StatTxOkCts & 0xFFFFFFFF;
+ pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts;
+ pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts;
+
+ if (pNet->Mtu <= 1500) {
+ pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF;
+ } else {
+ pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts -
+ pPnmiStat->StatRxTooLongCts) & 0xFFFFFFFF);
+ }
+
+
+ if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC && pAC->HWRevision < 12)
+ pAC->stats.rx_errors = pAC->stats.rx_errors - pPnmiStat->StatRxShortsCts;
+
+ pAC->stats.tx_errors = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF;
+ pAC->stats.rx_dropped = (SK_U32) pPnmiStruct->RxNoBufCts & 0xFFFFFFFF;
+ pAC->stats.tx_dropped = (SK_U32) pPnmiStruct->TxNoBufCts & 0xFFFFFFFF;
+ pAC->stats.multicast = (SK_U32) pPnmiStat->StatRxMulticastOkCts & 0xFFFFFFFF;
+ pAC->stats.collisions = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF;
+
+ /* detailed rx_errors: */
+ pAC->stats.rx_length_errors = (SK_U32) pPnmiStat->StatRxRuntCts & 0xFFFFFFFF;
+ pAC->stats.rx_over_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF;
+ pAC->stats.rx_crc_errors = (SK_U32) pPnmiStat->StatRxFcsCts & 0xFFFFFFFF;
+ pAC->stats.rx_frame_errors = (SK_U32) pPnmiStat->StatRxFramingCts & 0xFFFFFFFF;
+ pAC->stats.rx_fifo_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF;
+ pAC->stats.rx_missed_errors = (SK_U32) pPnmiStat->StatRxMissedCts & 0xFFFFFFFF;
+
+ /* detailed tx_errors */
+ pAC->stats.tx_aborted_errors = (SK_U32) 0;
+ pAC->stats.tx_carrier_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF;
+ pAC->stats.tx_fifo_errors = (SK_U32) pPnmiStat->StatTxFifoUnderrunCts & 0xFFFFFFFF;
+ pAC->stats.tx_heartbeat_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF;
+ pAC->stats.tx_window_errors = (SK_U32) 0;
+
+ return(&pAC->stats);
+} /* SkGeStats */
+
+
+/*****************************************************************************
+ *
+ * SkGeIoctl - IO-control function
+ *
+ * Description:
+ * This function is called if an ioctl is issued on the device.
+ * There are three subfunction for reading, writing and test-writing
+ * the private MIB data structure (usefull for SysKonnect-internal tools).
+ *
+ * Returns:
+ * 0, if everything is ok
+ * !=0, on error
+ */
+static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd)
+{
+DEV_NET *pNet;
+SK_AC *pAC;
+
+SK_GE_IOCTL Ioctl;
+unsigned int Err = 0;
+int Size;
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("SkGeIoctl starts now...\n"));
+
+ pNet = (DEV_NET*) dev->priv;
+ pAC = pNet->pAC;
+
+ if(copy_from_user(&Ioctl, rq->ifr_data, sizeof(SK_GE_IOCTL))) {
+ return -EFAULT;
+ }
+
+ switch(cmd) {
+ case SK_IOCTL_SETMIB:
+ case SK_IOCTL_PRESETMIB:
+ if (!capable(CAP_NET_ADMIN)) return -EPERM;
+ case SK_IOCTL_GETMIB:
+ if(copy_from_user(&pAC->PnmiStruct, Ioctl.pData,
+ Ioctl.Len<sizeof(pAC->PnmiStruct)?
+ Ioctl.Len : sizeof(pAC->PnmiStruct))) {
+ return -EFAULT;
+ }
+ Size = SkGeIocMib(pNet, Ioctl.Len, cmd);
+ if(copy_to_user(Ioctl.pData, &pAC->PnmiStruct,
+ Ioctl.Len<Size? Ioctl.Len : Size)) {
+ return -EFAULT;
+ }
+ Ioctl.Len = Size;
+ if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) {
+ return -EFAULT;
+ }
+ break;
+ default:
+ Err = -EOPNOTSUPP;
+ }
+ return(Err);
+} /* SkGeIoctl */
+
+
+/*****************************************************************************
+ *
+ * SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message
+ *
+ * Description:
+ * This function reads/writes the MIB data using PNMI (Private Network
+ * Management Interface).
+ * The destination for the data must be provided with the
+ * ioctl call and is given to the driver in the form of
+ * a user space address.
+ * Copying from the user-provided data area into kernel messages
+ * and back is done by copy_from_user and copy_to_user calls in
+ * SkGeIoctl.
+ *
+ * Returns:
+ * returned size from PNMI call
+ */
+static int SkGeIocMib(
+DEV_NET *pNet, /* pointer to the adapter context */
+unsigned int Size, /* length of ioctl data */
+int mode) /* flag for set/preset */
+{
+unsigned long Flags; /* for spin lock */
+SK_AC *pAC;
+
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("SkGeIocMib starts now...\n"));
+ pAC = pNet->pAC;
+ /* access MIB */
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+ switch(mode) {
+ case SK_IOCTL_GETMIB:
+ SkPnmiGetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size,
+ pNet->NetNr);
+ break;
+ case SK_IOCTL_PRESETMIB:
+ SkPnmiPreSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size,
+ pNet->NetNr);
+ break;
+ case SK_IOCTL_SETMIB:
+ SkPnmiSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size,
+ pNet->NetNr);
+ break;
+ default:
+ break;
+ }
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+ ("MIB data access succeeded\n"));
+ return (Size);
+} /* SkGeIocMib */
+#endif
+
+
+/*****************************************************************************
+ *
+ * GetConfiguration - read configuration information
+ *
+ * Description:
+ * This function reads per-adapter configuration information from
+ * the options provided on the command line.
+ *
+ * Returns:
+ * none
+ */
+static void GetConfiguration(
+SK_AC *pAC) /* pointer to the adapter context structure */
+{
+SK_I32 Port; /* preferred port */
+int LinkSpeed; /* Link speed */
+int AutoNeg; /* auto negotiation off (0) or on (1) */
+int DuplexCap; /* duplex capabilities (0=both, 1=full, 2=half */
+int MSMode; /* master / slave mode selection */
+SK_BOOL AutoSet;
+SK_BOOL DupSet;
+/*
+ * The two parameters AutoNeg. and DuplexCap. map to one configuration
+ * parameter. The mapping is described by this table:
+ * DuplexCap -> | both | full | half |
+ * AutoNeg | | | |
+ * -----------------------------------------------------------------
+ * Off | illegal | Full | Half |
+ * -----------------------------------------------------------------
+ * On | AutoBoth | AutoFull | AutoHalf |
+ * -----------------------------------------------------------------
+ * Sense | AutoSense | AutoSense | AutoSense |
+ */
+int Capabilities[3][3] =
+ { { -1, SK_LMODE_FULL, SK_LMODE_HALF},
+ {SK_LMODE_AUTOBOTH, SK_LMODE_AUTOFULL, SK_LMODE_AUTOHALF},
+ {SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE} };
+#define DC_BOTH 0
+#define DC_FULL 1
+#define DC_HALF 2
+#define AN_OFF 0
+#define AN_ON 1
+#define AN_SENS 2
+
+ /* settings for port A */
+ /* settings link speed */
+ LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */
+ if (Speed_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+ Speed_A[pAC->Index] != NULL) {
+ if (strcmp(Speed_A[pAC->Index],"")==0) {
+ LinkSpeed = SK_LSPEED_AUTO;
+ }
+ else if (strcmp(Speed_A[pAC->Index],"Auto")==0) {
+ LinkSpeed = SK_LSPEED_AUTO;
+ }
+ else if (strcmp(Speed_A[pAC->Index],"10")==0) {
+ LinkSpeed = SK_LSPEED_10MBPS;
+ }
+ else if (strcmp(Speed_A[pAC->Index],"100")==0) {
+ LinkSpeed = SK_LSPEED_100MBPS;
+ }
+ else if (strcmp(Speed_A[pAC->Index],"1000")==0) {
+ LinkSpeed = SK_LSPEED_1000MBPS;
+ }
+ else printk("%s: Illegal value for Speed_A\n",
+ pAC->dev[0]->name);
+ }
+
+ /* Check speed parameter */
+ /* Only copper type adapter and GE V2 cards */
+ if (((pAC->GIni.GIChipId != CHIP_ID_YUKON) ||
+ (pAC->GIni.GICopperType != SK_TRUE)) &&
+ ((LinkSpeed != SK_LSPEED_AUTO) &&
+ (LinkSpeed != SK_LSPEED_1000MBPS))) {
+ printk("%s: Illegal value for Speed_A. "
+ "Not a copper card or GE V2 card\n Using "
+ "speed 1000\n", pAC->dev[0]->name);
+ LinkSpeed = SK_LSPEED_1000MBPS;
+ }
+ pAC->GIni.GP[0].PLinkSpeed = LinkSpeed;
+
+ /* Autonegotiation */
+ AutoNeg = AN_ON; /* tschilling: Default: Autonegotiation on! */
+ AutoSet = SK_FALSE;
+ if (AutoNeg_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+ AutoNeg_A[pAC->Index] != NULL) {
+ AutoSet = SK_TRUE;
+ if (strcmp(AutoNeg_A[pAC->Index],"")==0) {
+ AutoSet = SK_FALSE;
+ }
+ else if (strcmp(AutoNeg_A[pAC->Index],"On")==0) {
+ AutoNeg = AN_ON;
+ }
+ else if (strcmp(AutoNeg_A[pAC->Index],"Off")==0) {
+ AutoNeg = AN_OFF;
+ }
+ else if (strcmp(AutoNeg_A[pAC->Index],"Sense")==0) {
+ AutoNeg = AN_SENS;
+ }
+ else printk("%s: Illegal value for AutoNeg_A\n",
+ pAC->dev[0]->name);
+ }
+
+ DuplexCap = DC_BOTH;
+ DupSet = SK_FALSE;
+ if (DupCap_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+ DupCap_A[pAC->Index] != NULL) {
+ DupSet = SK_TRUE;
+ if (strcmp(DupCap_A[pAC->Index],"")==0) {
+ DupSet = SK_FALSE;
+ }
+ else if (strcmp(DupCap_A[pAC->Index],"Both")==0) {
+ DuplexCap = DC_BOTH;
+ }
+ else if (strcmp(DupCap_A[pAC->Index],"Full")==0) {
+ DuplexCap = DC_FULL;
+ }
+ else if (strcmp(DupCap_A[pAC->Index],"Half")==0) {
+ DuplexCap = DC_HALF;
+ }
+ else printk("%s: Illegal value for DupCap_A\n",
+ pAC->dev[0]->name);
+ }
+
+ /* check for illegal combinations */
+ if (AutoSet && AutoNeg==AN_SENS && DupSet) {
+ printk("%s, Port A: DuplexCapabilities"
+ " ignored using Sense mode\n", pAC->dev[0]->name);
+ }
+ if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){
+ printk("%s, Port A: Illegal combination"
+ " of values AutoNeg. and DuplexCap.\n Using "
+ "Full Duplex\n", pAC->dev[0]->name);
+
+ DuplexCap = DC_FULL;
+ }
+ if (AutoSet && AutoNeg==AN_OFF && !DupSet) {
+ DuplexCap = DC_FULL;
+ }
+
+ if (!AutoSet && DupSet) {
+ printk("%s, Port A: Duplex setting not"
+ " possible in\n default AutoNegotiation mode"
+ " (Sense).\n Using AutoNegotiation On\n",
+ pAC->dev[0]->name);
+ AutoNeg = AN_ON;
+ }
+
+ /* set the desired mode */
+ pAC->GIni.GP[0].PLinkModeConf =
+ Capabilities[AutoNeg][DuplexCap];
+
+ pAC->GIni.GP[0].PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM;
+ if (FlowCtrl_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+ FlowCtrl_A[pAC->Index] != NULL) {
+ if (strcmp(FlowCtrl_A[pAC->Index],"") == 0) {
+ }
+ else if (strcmp(FlowCtrl_A[pAC->Index],"SymOrRem") == 0) {
+ pAC->GIni.GP[0].PFlowCtrlMode =
+ SK_FLOW_MODE_SYM_OR_REM;
+ }
+ else if (strcmp(FlowCtrl_A[pAC->Index],"Sym")==0) {
+ pAC->GIni.GP[0].PFlowCtrlMode =
+ SK_FLOW_MODE_SYMMETRIC;
+ }
+ else if (strcmp(FlowCtrl_A[pAC->Index],"LocSend")==0) {
+ pAC->GIni.GP[0].PFlowCtrlMode =
+ SK_FLOW_MODE_LOC_SEND;
+ }
+ else if (strcmp(FlowCtrl_A[pAC->Index],"None")==0) {
+ pAC->GIni.GP[0].PFlowCtrlMode =
+ SK_FLOW_MODE_NONE;
+ }
+ else printk("Illegal value for FlowCtrl_A\n");
+ }
+ if (AutoNeg==AN_OFF && pAC->GIni.GP[0].PFlowCtrlMode!=
+ SK_FLOW_MODE_NONE) {
+ printk("%s, Port A: FlowControl"
+ " impossible without AutoNegotiation,"
+ " disabled\n", pAC->dev[0]->name);
+ pAC->GIni.GP[0].PFlowCtrlMode = SK_FLOW_MODE_NONE;
+ }
+
+ MSMode = SK_MS_MODE_AUTO; /* default: do auto select */
+ if (Role_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+ Role_A[pAC->Index] != NULL) {
+ if (strcmp(Role_A[pAC->Index],"")==0) {
+ }
+ else if (strcmp(Role_A[pAC->Index],"Auto")==0) {
+ MSMode = SK_MS_MODE_AUTO;
+ }
+ else if (strcmp(Role_A[pAC->Index],"Master")==0) {
+ MSMode = SK_MS_MODE_MASTER;
+ }
+ else if (strcmp(Role_A[pAC->Index],"Slave")==0) {
+ MSMode = SK_MS_MODE_SLAVE;
+ }
+ else printk("%s: Illegal value for Role_A\n",
+ pAC->dev[0]->name);
+ }
+ pAC->GIni.GP[0].PMSMode = MSMode;
+
+
+ /* settings for port B */
+ /* settings link speed */
+ LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */
+ if (Speed_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+ Speed_B[pAC->Index] != NULL) {
+ if (strcmp(Speed_B[pAC->Index],"")==0) {
+ LinkSpeed = SK_LSPEED_AUTO;
+ }
+ else if (strcmp(Speed_B[pAC->Index],"Auto")==0) {
+ LinkSpeed = SK_LSPEED_AUTO;
+ }
+ else if (strcmp(Speed_B[pAC->Index],"10")==0) {
+ LinkSpeed = SK_LSPEED_10MBPS;
+ }
+ else if (strcmp(Speed_B[pAC->Index],"100")==0) {
+ LinkSpeed = SK_LSPEED_100MBPS;
+ }
+ else if (strcmp(Speed_B[pAC->Index],"1000")==0) {
+ LinkSpeed = SK_LSPEED_1000MBPS;
+ }
+ else printk("%s: Illegal value for Speed_B\n",
+ pAC->dev[1]->name);
+ }
+
+ /* Check speed parameter */
+ /* Only copper type adapter and GE V2 cards */
+ if (((pAC->GIni.GIChipId != CHIP_ID_YUKON) ||
+ (pAC->GIni.GICopperType != SK_TRUE)) &&
+ ((LinkSpeed != SK_LSPEED_AUTO) &&
+ (LinkSpeed != SK_LSPEED_1000MBPS))) {
+ printk("%s: Illegal value for Speed_B. "
+ "Not a copper card or GE V2 card\n Using "
+ "speed 1000\n", pAC->dev[1]->name);
+ LinkSpeed = SK_LSPEED_1000MBPS;
+ }
+ pAC->GIni.GP[1].PLinkSpeed = LinkSpeed;
+
+ /* Auto negotiation */
+ AutoNeg = AN_SENS; /* default: do auto Sense */
+ AutoSet = SK_FALSE;
+ if (AutoNeg_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+ AutoNeg_B[pAC->Index] != NULL) {
+ AutoSet = SK_TRUE;
+ if (strcmp(AutoNeg_B[pAC->Index],"")==0) {
+ AutoSet = SK_FALSE;
+ }
+ else if (strcmp(AutoNeg_B[pAC->Index],"On")==0) {
+ AutoNeg = AN_ON;
+ }
+ else if (strcmp(AutoNeg_B[pAC->Index],"Off")==0) {
+ AutoNeg = AN_OFF;
+ }
+ else if (strcmp(AutoNeg_B[pAC->Index],"Sense")==0) {
+ AutoNeg = AN_SENS;
+ }
+ else printk("Illegal value for AutoNeg_B\n");
+ }
+
+ DuplexCap = DC_BOTH;
+ DupSet = SK_FALSE;
+ if (DupCap_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+ DupCap_B[pAC->Index] != NULL) {
+ DupSet = SK_TRUE;
+ if (strcmp(DupCap_B[pAC->Index],"")==0) {
+ DupSet = SK_FALSE;
+ }
+ else if (strcmp(DupCap_B[pAC->Index],"Both")==0) {
+ DuplexCap = DC_BOTH;
+ }
+ else if (strcmp(DupCap_B[pAC->Index],"Full")==0) {
+ DuplexCap = DC_FULL;
+ }
+ else if (strcmp(DupCap_B[pAC->Index],"Half")==0) {
+ DuplexCap = DC_HALF;
+ }
+ else printk("Illegal value for DupCap_B\n");
+ }
+
+ /* check for illegal combinations */
+ if (AutoSet && AutoNeg==AN_SENS && DupSet) {
+ printk("%s, Port B: DuplexCapabilities"
+ " ignored using Sense mode\n", pAC->dev[1]->name);
+ }
+ if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){
+ printk("%s, Port B: Illegal combination"
+ " of values AutoNeg. and DuplexCap.\n Using "
+ "Full Duplex\n", pAC->dev[1]->name);
+
+ DuplexCap = DC_FULL;
+ }
+ if (AutoSet && AutoNeg==AN_OFF && !DupSet) {
+ DuplexCap = DC_FULL;
+ }
+
+ if (!AutoSet && DupSet) {
+ printk("%s, Port B: Duplex setting not"
+ " possible in\n default AutoNegotiation mode"
+ " (Sense).\n Using AutoNegotiation On\n",
+ pAC->dev[1]->name);
+ AutoNeg = AN_ON;
+ }
+
+ /* set the desired mode */
+ pAC->GIni.GP[1].PLinkModeConf =
+ Capabilities[AutoNeg][DuplexCap];
+
+ pAC->GIni.GP[1].PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM;
+ if (FlowCtrl_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+ FlowCtrl_B[pAC->Index] != NULL) {
+ if (strcmp(FlowCtrl_B[pAC->Index],"") == 0) {
+ }
+ else if (strcmp(FlowCtrl_B[pAC->Index],"SymOrRem") == 0) {
+ pAC->GIni.GP[1].PFlowCtrlMode =
+ SK_FLOW_MODE_SYM_OR_REM;
+ }
+ else if (strcmp(FlowCtrl_B[pAC->Index],"Sym")==0) {
+ pAC->GIni.GP[1].PFlowCtrlMode =
+ SK_FLOW_MODE_SYMMETRIC;
+ }
+ else if (strcmp(FlowCtrl_B[pAC->Index],"LocSend")==0) {
+ pAC->GIni.GP[1].PFlowCtrlMode =
+ SK_FLOW_MODE_LOC_SEND;
+ }
+ else if (strcmp(FlowCtrl_B[pAC->Index],"None")==0) {
+ pAC->GIni.GP[1].PFlowCtrlMode =
+ SK_FLOW_MODE_NONE;
+ }
+ else printk("Illegal value for FlowCtrl_B\n");
+ }
+ if (AutoNeg==AN_OFF && pAC->GIni.GP[1].PFlowCtrlMode!=
+ SK_FLOW_MODE_NONE) {
+ printk("%s, Port B: FlowControl"
+ " impossible without AutoNegotiation,"
+ " disabled\n", pAC->dev[1]->name);
+ pAC->GIni.GP[1].PFlowCtrlMode = SK_FLOW_MODE_NONE;
+ }
+
+ MSMode = SK_MS_MODE_AUTO; /* default: do auto select */
+ if (Role_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+ Role_B[pAC->Index] != NULL) {
+ if (strcmp(Role_B[pAC->Index],"")==0) {
+ }
+ else if (strcmp(Role_B[pAC->Index],"Auto")==0) {
+ MSMode = SK_MS_MODE_AUTO;
+ }
+ else if (strcmp(Role_B[pAC->Index],"Master")==0) {
+ MSMode = SK_MS_MODE_MASTER;
+ }
+ else if (strcmp(Role_B[pAC->Index],"Slave")==0) {
+ MSMode = SK_MS_MODE_SLAVE;
+ }
+ else printk("%s: Illegal value for Role_B\n",
+ pAC->dev[1]->name);
+ }
+ pAC->GIni.GP[1].PMSMode = MSMode;
+
+
+ /* settings for both ports */
+ pAC->ActivePort = 0;
+ if (PrefPort != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+ PrefPort[pAC->Index] != NULL) {
+ if (strcmp(PrefPort[pAC->Index],"") == 0) { /* Auto */
+ pAC->ActivePort = 0;
+ pAC->Rlmt.Net[0].Preference = -1; /* auto */
+ pAC->Rlmt.Net[0].PrefPort = 0;
+ }
+ else if (strcmp(PrefPort[pAC->Index],"A") == 0) {
+ /*
+ * do not set ActivePort here, thus a port
+ * switch is issued after net up.
+ */
+ Port = 0;
+ pAC->Rlmt.Net[0].Preference = Port;
+ pAC->Rlmt.Net[0].PrefPort = Port;
+ }
+ else if (strcmp(PrefPort[pAC->Index],"B") == 0) {
+ /*
+ * do not set ActivePort here, thus a port
+ * switch is issued after net up.
+ */
+ Port = 1;
+ pAC->Rlmt.Net[0].Preference = Port;
+ pAC->Rlmt.Net[0].PrefPort = Port;
+ }
+ else printk("%s: Illegal value for PrefPort\n",
+ pAC->dev[0]->name);
+ }
+
+ pAC->RlmtNets = 1;
+
+ if (RlmtMode != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+ RlmtMode[pAC->Index] != NULL) {
+ if (strcmp(RlmtMode[pAC->Index], "") == 0) {
+ pAC->RlmtMode = 0;
+ }
+ else if (strcmp(RlmtMode[pAC->Index], "CheckLinkState") == 0) {
+ pAC->RlmtMode = SK_RLMT_CHECK_LINK;
+ }
+ else if (strcmp(RlmtMode[pAC->Index], "CheckLocalPort") == 0) {
+ pAC->RlmtMode = SK_RLMT_CHECK_LINK |
+ SK_RLMT_CHECK_LOC_LINK;
+ }
+ else if (strcmp(RlmtMode[pAC->Index], "CheckSeg") == 0) {
+ pAC->RlmtMode = SK_RLMT_CHECK_LINK |
+ SK_RLMT_CHECK_LOC_LINK |
+ SK_RLMT_CHECK_SEG;
+ }
+ else if ((strcmp(RlmtMode[pAC->Index], "DualNet") == 0) &&
+ (pAC->GIni.GIMacsFound == 2)) {
+ pAC->RlmtMode = SK_RLMT_CHECK_LINK;
+ pAC->RlmtNets = 2;
+ }
+ else {
+ printk("%s: Illegal value for"
+ " RlmtMode, using default\n", pAC->dev[0]->name);
+ pAC->RlmtMode = 0;
+ }
+ }
+ else {
+ pAC->RlmtMode = 0;
+ }
+} /* GetConfiguration */
+
+
+/*****************************************************************************
+ *
+ * ProductStr - return a adapter identification string from vpd
+ *
+ * Description:
+ * This function reads the product name string from the vpd area
+ * and puts it the field pAC->DeviceString.
+ *
+ * Returns: N/A
+ */
+static void ProductStr(
+SK_AC *pAC /* pointer to adapter context */
+)
+{
+int StrLen = 80; /* length of the string, defined in SK_AC */
+char Keyword[] = VPD_NAME; /* vpd productname identifier */
+int ReturnCode; /* return code from vpd_read */
+unsigned long Flags;
+
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+ ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, pAC->DeviceStr,
+ &StrLen);
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+ if (ReturnCode != 0) {
+ /* there was an error reading the vpd data */
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR,
+ ("Error reading VPD data: %d\n", ReturnCode));
+ pAC->DeviceStr[0] = '\0';
+ }
+} /* ProductStr */
+
+
+/****************************************************************************/
+/* functions for common modules *********************************************/
+/****************************************************************************/
+
+
+/*****************************************************************************
+ *
+ * SkDrvAllocRlmtMbuf - allocate an RLMT mbuf
+ *
+ * Description:
+ * This routine returns an RLMT mbuf or NULL. The RLMT Mbuf structure
+ * is embedded into a socket buff data area.
+ *
+ * Context:
+ * runtime
+ *
+ * Returns:
+ * NULL or pointer to Mbuf.
+ */
+SK_MBUF *SkDrvAllocRlmtMbuf(
+SK_AC *pAC, /* pointer to adapter context */
+SK_IOC IoC, /* the IO-context */
+unsigned BufferSize) /* size of the requested buffer */
+{
+SK_MBUF *pRlmtMbuf; /* pointer to a new rlmt-mbuf structure */
+struct sk_buff *pMsgBlock; /* pointer to a new message block */
+
+ pMsgBlock = alloc_skb(BufferSize + sizeof(SK_MBUF), GFP_ATOMIC);
+ if (pMsgBlock == NULL) {
+ return (NULL);
+ }
+ pRlmtMbuf = (SK_MBUF*) pMsgBlock->data;
+ skb_reserve(pMsgBlock, sizeof(SK_MBUF));
+ pRlmtMbuf->pNext = NULL;
+ pRlmtMbuf->pOs = pMsgBlock;
+ pRlmtMbuf->pData = pMsgBlock->data; /* Data buffer. */
+ pRlmtMbuf->Size = BufferSize; /* Data buffer size. */
+ pRlmtMbuf->Length = 0; /* Length of packet (<= Size). */
+ return (pRlmtMbuf);
+
+} /* SkDrvAllocRlmtMbuf */
+
+
+/*****************************************************************************
+ *
+ * SkDrvFreeRlmtMbuf - free an RLMT mbuf
+ *
+ * Description:
+ * This routine frees one or more RLMT mbuf(s).
+ *
+ * Context:
+ * runtime
+ *
+ * Returns:
+ * Nothing
+ */
+void SkDrvFreeRlmtMbuf(
+SK_AC *pAC, /* pointer to adapter context */
+SK_IOC IoC, /* the IO-context */
+SK_MBUF *pMbuf) /* size of the requested buffer */
+{
+SK_MBUF *pFreeMbuf;
+SK_MBUF *pNextMbuf;
+
+ pFreeMbuf = pMbuf;
+ do {
+ pNextMbuf = pFreeMbuf->pNext;
+ DEV_KFREE_SKB_ANY(pFreeMbuf->pOs);
+ pFreeMbuf = pNextMbuf;
+ } while ( pFreeMbuf != NULL );
+} /* SkDrvFreeRlmtMbuf */
+
+
+/*****************************************************************************
+ *
+ * SkOsGetTime - provide a time value
+ *
+ * Description:
+ * This routine provides a time value. The unit is 1/HZ (defined by Linux).
+ * It is not used for absolute time, but only for time differences.
+ *
+ *
+ * Returns:
+ * Time value
+ */
+SK_U64 SkOsGetTime(SK_AC *pAC)
+{
+#if 0
+ return jiffies;
+#else
+ return get_timer(0);
+#endif
+} /* SkOsGetTime */
+
+
+/*****************************************************************************
+ *
+ * SkPciReadCfgDWord - read a 32 bit value from pci config space
+ *
+ * Description:
+ * This routine reads a 32 bit value from the pci configuration
+ * space.
+ *
+ * Returns:
+ * 0 - indicate everything worked ok.
+ * != 0 - error indication
+ */
+int SkPciReadCfgDWord(
+SK_AC *pAC, /* Adapter Control structure pointer */
+int PciAddr, /* PCI register address */
+SK_U32 *pVal) /* pointer to store the read value */
+{
+ pci_read_config_dword(pAC->PciDev, PciAddr, pVal);
+ return(0);
+} /* SkPciReadCfgDWord */
+
+
+/*****************************************************************************
+ *
+ * SkPciReadCfgWord - read a 16 bit value from pci config space
+ *
+ * Description:
+ * This routine reads a 16 bit value from the pci configuration
+ * space.
+ *
+ * Returns:
+ * 0 - indicate everything worked ok.
+ * != 0 - error indication
+ */
+int SkPciReadCfgWord(
+SK_AC *pAC, /* Adapter Control structure pointer */
+int PciAddr, /* PCI register address */
+SK_U16 *pVal) /* pointer to store the read value */
+{
+ pci_read_config_word(pAC->PciDev, PciAddr, pVal);
+ return(0);
+} /* SkPciReadCfgWord */
+
+
+/*****************************************************************************
+ *
+ * SkPciReadCfgByte - read a 8 bit value from pci config space
+ *
+ * Description:
+ * This routine reads a 8 bit value from the pci configuration
+ * space.
+ *
+ * Returns:
+ * 0 - indicate everything worked ok.
+ * != 0 - error indication
+ */
+int SkPciReadCfgByte(
+SK_AC *pAC, /* Adapter Control structure pointer */
+int PciAddr, /* PCI register address */
+SK_U8 *pVal) /* pointer to store the read value */
+{
+ pci_read_config_byte(pAC->PciDev, PciAddr, pVal);
+ return(0);
+} /* SkPciReadCfgByte */
+
+
+/*****************************************************************************
+ *
+ * SkPciWriteCfgDWord - write a 32 bit value to pci config space
+ *
+ * Description:
+ * This routine writes a 32 bit value to the pci configuration
+ * space.
+ *
+ * Returns:
+ * 0 - indicate everything worked ok.
+ * != 0 - error indication
+ */
+int SkPciWriteCfgDWord(
+SK_AC *pAC, /* Adapter Control structure pointer */
+int PciAddr, /* PCI register address */
+SK_U32 Val) /* pointer to store the read value */
+{
+ pci_write_config_dword(pAC->PciDev, PciAddr, Val);
+ return(0);
+} /* SkPciWriteCfgDWord */
+
+
+/*****************************************************************************
+ *
+ * SkPciWriteCfgWord - write a 16 bit value to pci config space
+ *
+ * Description:
+ * This routine writes a 16 bit value to the pci configuration
+ * space. The flag PciConfigUp indicates whether the config space
+ * is accesible or must be set up first.
+ *
+ * Returns:
+ * 0 - indicate everything worked ok.
+ * != 0 - error indication
+ */
+int SkPciWriteCfgWord(
+SK_AC *pAC, /* Adapter Control structure pointer */
+int PciAddr, /* PCI register address */
+SK_U16 Val) /* pointer to store the read value */
+{
+ pci_write_config_word(pAC->PciDev, PciAddr, Val);
+ return(0);
+} /* SkPciWriteCfgWord */
+
+
+/*****************************************************************************
+ *
+ * SkPciWriteCfgWord - write a 8 bit value to pci config space
+ *
+ * Description:
+ * This routine writes a 8 bit value to the pci configuration
+ * space. The flag PciConfigUp indicates whether the config space
+ * is accesible or must be set up first.
+ *
+ * Returns:
+ * 0 - indicate everything worked ok.
+ * != 0 - error indication
+ */
+int SkPciWriteCfgByte(
+SK_AC *pAC, /* Adapter Control structure pointer */
+int PciAddr, /* PCI register address */
+SK_U8 Val) /* pointer to store the read value */
+{
+ pci_write_config_byte(pAC->PciDev, PciAddr, Val);
+ return(0);
+} /* SkPciWriteCfgByte */
+
+
+/*****************************************************************************
+ *
+ * SkDrvEvent - handle driver events
+ *
+ * Description:
+ * This function handles events from all modules directed to the driver
+ *
+ * Context:
+ * Is called under protection of slow path lock.
+ *
+ * Returns:
+ * 0 if everything ok
+ * < 0 on error
+ *
+ */
+int SkDrvEvent(
+SK_AC *pAC, /* pointer to adapter context */
+SK_IOC IoC, /* io-context */
+SK_U32 Event, /* event-id */
+SK_EVPARA Param) /* event-parameter */
+{
+SK_MBUF *pRlmtMbuf; /* pointer to a rlmt-mbuf structure */
+struct sk_buff *pMsg; /* pointer to a message block */
+int FromPort; /* the port from which we switch away */
+int ToPort; /* the port we switch to */
+SK_EVPARA NewPara; /* parameter for further events */
+#if 0
+int Stat;
+#endif
+unsigned long Flags;
+SK_BOOL DualNet;
+
+ switch (Event) {
+ case SK_DRV_ADAP_FAIL:
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+ ("ADAPTER FAIL EVENT\n"));
+ printk("%s: Adapter failed.\n", pAC->dev[0]->name);
+ /* disable interrupts */
+ SK_OUT32(pAC->IoBase, B0_IMSK, 0);
+ /* cgoos */
+ break;
+ case SK_DRV_PORT_FAIL:
+ FromPort = Param.Para32[0];
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+ ("PORT FAIL EVENT, Port: %d\n", FromPort));
+ if (FromPort == 0) {
+ printk("%s: Port A failed.\n", pAC->dev[0]->name);
+ } else {
+ printk("%s: Port B failed.\n", pAC->dev[1]->name);
+ }
+ /* cgoos */
+ break;
+ case SK_DRV_PORT_RESET: /* SK_U32 PortIdx */
+ /* action list 4 */
+ FromPort = Param.Para32[0];
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+ ("PORT RESET EVENT, Port: %d ", FromPort));
+ NewPara.Para64 = FromPort;
+ SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara);
+ spin_lock_irqsave(
+ &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+ Flags);
+ SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_HARD_RST);
+#if 0
+ pAC->dev[Param.Para32[0]]->flags &= ~IFF_RUNNING;
+#endif
+ spin_unlock_irqrestore(
+ &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+ Flags);
+
+ /* clear rx ring from received frames */
+ ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE);
+
+ ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]);
+ spin_lock_irqsave(
+ &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+ Flags);
+
+ /* tschilling: Handling of return value inserted. */
+ if (SkGeInitPort(pAC, IoC, FromPort)) {
+ if (FromPort == 0) {
+ printk("%s: SkGeInitPort A failed.\n", pAC->dev[0]->name);
+ } else {
+ printk("%s: SkGeInitPort B failed.\n", pAC->dev[1]->name);
+ }
+ }
+ SkAddrMcUpdate(pAC,IoC, FromPort);
+ PortReInitBmu(pAC, FromPort);
+ SkGePollTxD(pAC, IoC, FromPort, SK_TRUE);
+ ClearAndStartRx(pAC, FromPort);
+ spin_unlock_irqrestore(
+ &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+ Flags);
+ break;
+ case SK_DRV_NET_UP: /* SK_U32 PortIdx */
+ /* action list 5 */
+ FromPort = Param.Para32[0];
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+ ("NET UP EVENT, Port: %d ", Param.Para32[0]));
+#ifdef SK98_INFO
+ printk("%s: network connection up using"
+ " port %c\n", pAC->dev[Param.Para32[0]]->name, 'A'+Param.Para32[0]);
+
+ /* tschilling: Values changed according to LinkSpeedUsed. */
+ Stat = pAC->GIni.GP[FromPort].PLinkSpeedUsed;
+ if (Stat == SK_LSPEED_STAT_10MBPS) {
+ printk(" speed: 10\n");
+ } else if (Stat == SK_LSPEED_STAT_100MBPS) {
+ printk(" speed: 100\n");
+ } else if (Stat == SK_LSPEED_STAT_1000MBPS) {
+ printk(" speed: 1000\n");
+ } else {
+ printk(" speed: unknown\n");
+ }
+
+ Stat = pAC->GIni.GP[FromPort].PLinkModeStatus;
+ if (Stat == SK_LMODE_STAT_AUTOHALF ||
+ Stat == SK_LMODE_STAT_AUTOFULL) {
+ printk(" autonegotiation: yes\n");
+ }
+ else {
+ printk(" autonegotiation: no\n");
+ }
+ if (Stat == SK_LMODE_STAT_AUTOHALF ||
+ Stat == SK_LMODE_STAT_HALF) {
+ printk(" duplex mode: half\n");
+ }
+ else {
+ printk(" duplex mode: full\n");
+ }
+ Stat = pAC->GIni.GP[FromPort].PFlowCtrlStatus;
+ if (Stat == SK_FLOW_STAT_REM_SEND ) {
+ printk(" flowctrl: remote send\n");
+ }
+ else if (Stat == SK_FLOW_STAT_LOC_SEND ){
+ printk(" flowctrl: local send\n");
+ }
+ else if (Stat == SK_FLOW_STAT_SYMMETRIC ){
+ printk(" flowctrl: symmetric\n");
+ }
+ else {
+ printk(" flowctrl: none\n");
+ }
+
+ /* tschilling: Check against CopperType now. */
+ if ((pAC->GIni.GICopperType == SK_TRUE) &&
+ (pAC->GIni.GP[FromPort].PLinkSpeedUsed ==
+ SK_LSPEED_STAT_1000MBPS)) {
+ Stat = pAC->GIni.GP[FromPort].PMSStatus;
+ if (Stat == SK_MS_STAT_MASTER ) {
+ printk(" role: master\n");
+ }
+ else if (Stat == SK_MS_STAT_SLAVE ) {
+ printk(" role: slave\n");
+ }
+ else {
+ printk(" role: ???\n");
+ }
+ }
+
+#ifdef SK_ZEROCOPY
+ if (pAC->GIni.GIChipId == CHIP_ID_YUKON)
+ printk(" scatter-gather: enabled\n");
+ else
+ printk(" scatter-gather: disabled\n");
+
+#else
+ printk(" scatter-gather: disabled\n");
+#endif
+#endif /* SK98_INFO */
+
+ if ((Param.Para32[0] != pAC->ActivePort) &&
+ (pAC->RlmtNets == 1)) {
+ NewPara.Para32[0] = pAC->ActivePort;
+ NewPara.Para32[1] = Param.Para32[0];
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_INTERN,
+ NewPara);
+ }
+
+ /* Inform the world that link protocol is up. */
+#if 0
+ pAC->dev[Param.Para32[0]]->flags |= IFF_RUNNING;
+#endif
+
+ break;
+ case SK_DRV_NET_DOWN: /* SK_U32 Reason */
+ /* action list 7 */
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+ ("NET DOWN EVENT "));
+#ifdef SK98_INFO
+ printk("%s: network connection down\n", pAC->dev[Param.Para32[1]]->name);
+#endif
+#if 0
+ pAC->dev[Param.Para32[1]]->flags &= ~IFF_RUNNING;
+#endif
+ break;
+ case SK_DRV_SWITCH_HARD: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+ ("PORT SWITCH HARD "));
+ case SK_DRV_SWITCH_SOFT: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
+ /* action list 6 */
+ printk("%s: switching to port %c\n", pAC->dev[0]->name,
+ 'A'+Param.Para32[1]);
+ case SK_DRV_SWITCH_INTERN: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
+ FromPort = Param.Para32[0];
+ ToPort = Param.Para32[1];
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+ ("PORT SWITCH EVENT, From: %d To: %d (Pref %d) ",
+ FromPort, ToPort, pAC->Rlmt.Net[0].PrefPort));
+ NewPara.Para64 = FromPort;
+ SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara);
+ NewPara.Para64 = ToPort;
+ SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara);
+ spin_lock_irqsave(
+ &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+ Flags);
+ spin_lock_irqsave(
+ &pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
+ SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_SOFT_RST);
+ SkGeStopPort(pAC, IoC, ToPort, SK_STOP_ALL, SK_SOFT_RST);
+ spin_unlock_irqrestore(
+ &pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
+ spin_unlock_irqrestore(
+ &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+ Flags);
+
+ ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE); /* clears rx ring */
+ ReceiveIrq(pAC, &pAC->RxPort[ToPort], SK_FALSE); /* clears rx ring */
+
+ ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]);
+ ClearTxRing(pAC, &pAC->TxPort[ToPort][TX_PRIO_LOW]);
+ spin_lock_irqsave(
+ &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+ Flags);
+ spin_lock_irqsave(
+ &pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
+ pAC->ActivePort = ToPort;
+#if 0
+ SetQueueSizes(pAC);
+#else
+ /* tschilling: New common function with minimum size check. */
+ DualNet = SK_FALSE;
+ if (pAC->RlmtNets == 2) {
+ DualNet = SK_TRUE;
+ }
+
+ if (SkGeInitAssignRamToQueues(
+ pAC,
+ pAC->ActivePort,
+ DualNet)) {
+ spin_unlock_irqrestore(
+ &pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
+ spin_unlock_irqrestore(
+ &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+ Flags);
+ printk("SkGeInitAssignRamToQueues failed.\n");
+ break;
+ }
+#endif
+ /* tschilling: Handling of return values inserted. */
+ if (SkGeInitPort(pAC, IoC, FromPort) ||
+ SkGeInitPort(pAC, IoC, ToPort)) {
+ printk("%s: SkGeInitPort failed.\n", pAC->dev[0]->name);
+ }
+ if (Event == SK_DRV_SWITCH_SOFT) {
+ SkMacRxTxEnable(pAC, IoC, FromPort);
+ }
+ SkMacRxTxEnable(pAC, IoC, ToPort);
+ SkAddrSwap(pAC, IoC, FromPort, ToPort);
+ SkAddrMcUpdate(pAC, IoC, FromPort);
+ SkAddrMcUpdate(pAC, IoC, ToPort);
+ PortReInitBmu(pAC, FromPort);
+ PortReInitBmu(pAC, ToPort);
+ SkGePollTxD(pAC, IoC, FromPort, SK_TRUE);
+ SkGePollTxD(pAC, IoC, ToPort, SK_TRUE);
+ ClearAndStartRx(pAC, FromPort);
+ ClearAndStartRx(pAC, ToPort);
+ spin_unlock_irqrestore(
+ &pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
+ spin_unlock_irqrestore(
+ &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+ Flags);
+ break;
+ case SK_DRV_RLMT_SEND: /* SK_MBUF *pMb */
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+ ("RLS "));
+ pRlmtMbuf = (SK_MBUF*) Param.pParaPtr;
+ pMsg = (struct sk_buff*) pRlmtMbuf->pOs;
+ skb_put(pMsg, pRlmtMbuf->Length);
+ if (XmitFrame(pAC, &pAC->TxPort[pRlmtMbuf->PortIdx][TX_PRIO_LOW],
+ pMsg) < 0)
+
+ DEV_KFREE_SKB_ANY(pMsg);
+ break;
+ default:
+ break;
+ }
+ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+ ("END EVENT "));
+
+ return (0);
+} /* SkDrvEvent */
+
+
+/*****************************************************************************
+ *
+ * SkErrorLog - log errors
+ *
+ * Description:
+ * This function logs errors to the system buffer and to the console
+ *
+ * Returns:
+ * 0 if everything ok
+ * < 0 on error
+ *
+ */
+void SkErrorLog(
+SK_AC *pAC,
+int ErrClass,
+int ErrNum,
+char *pErrorMsg)
+{
+char ClassStr[80];
+
+ switch (ErrClass) {
+ case SK_ERRCL_OTHER:
+ strcpy(ClassStr, "Other error");
+ break;
+ case SK_ERRCL_CONFIG:
+ strcpy(ClassStr, "Configuration error");
+ break;
+ case SK_ERRCL_INIT:
+ strcpy(ClassStr, "Initialization error");
+ break;
+ case SK_ERRCL_NORES:
+ strcpy(ClassStr, "Out of resources error");
+ break;
+ case SK_ERRCL_SW:
+ strcpy(ClassStr, "internal Software error");
+ break;
+ case SK_ERRCL_HW:
+ strcpy(ClassStr, "Hardware failure");
+ break;
+ case SK_ERRCL_COMM:
+ strcpy(ClassStr, "Communication error");
+ break;
+ }
+ printk(KERN_INFO "%s: -- ERROR --\n Class: %s\n"
+ " Nr: 0x%x\n Msg: %s\n", pAC->dev[0]->name,
+ ClassStr, ErrNum, pErrorMsg);
+
+} /* SkErrorLog */
+
+#ifdef DEBUG
+/****************************************************************************/
+/* "debug only" section *****************************************************/
+/****************************************************************************/
+
+
+/*****************************************************************************
+ *
+ * DumpMsg - print a frame
+ *
+ * Description:
+ * This function prints frames to the system logfile/to the console.
+ *
+ * Returns: N/A
+ *
+ */
+static void DumpMsg(struct sk_buff *skb, char *str)
+{
+ int msglen;
+
+ if (skb == NULL) {
+ printk("DumpMsg(): NULL-Message\n");
+ return;
+ }
+
+ if (skb->data == NULL) {
+ printk("DumpMsg(): Message empty\n");
+ return;
+ }
+
+ msglen = skb->len;
+ if (msglen > 64)
+ msglen = 64;
+
+ printk("--- Begin of message from %s , len %d (from %d) ----\n", str, msglen, skb->len);
+
+ DumpData((char *)skb->data, msglen);
+
+ printk("------- End of message ---------\n");
+} /* DumpMsg */
+
+
+/*****************************************************************************
+ *
+ * DumpData - print a data area
+ *
+ * Description:
+ * This function prints a area of data to the system logfile/to the
+ * console.
+ *
+ * Returns: N/A
+ *
+ */
+static void DumpData(char *p, int size)
+{
+register int i;
+int haddr, addr;
+char hex_buffer[180];
+char asc_buffer[180];
+char HEXCHAR[] = "0123456789ABCDEF";
+
+ addr = 0;
+ haddr = 0;
+ hex_buffer[0] = 0;
+ asc_buffer[0] = 0;
+ for (i=0; i < size; ) {
+ if (*p >= '0' && *p <='z')
+ asc_buffer[addr] = *p;
+ else
+ asc_buffer[addr] = '.';
+ addr++;
+ asc_buffer[addr] = 0;
+ hex_buffer[haddr] = HEXCHAR[(*p & 0xf0) >> 4];
+ haddr++;
+ hex_buffer[haddr] = HEXCHAR[*p & 0x0f];
+ haddr++;
+ hex_buffer[haddr] = ' ';
+ haddr++;
+ hex_buffer[haddr] = 0;
+ p++;
+ i++;
+ if (i%16 == 0) {
+ printk("%s %s\n", hex_buffer, asc_buffer);
+ addr = 0;
+ haddr = 0;
+ }
+ }
+} /* DumpData */
+
+
+/*****************************************************************************
+ *
+ * DumpLong - print a data area as long values
+ *
+ * Description:
+ * This function prints a area of data to the system logfile/to the
+ * console.
+ *
+ * Returns: N/A
+ *
+ */
+static void DumpLong(char *pc, int size)
+{
+register int i;
+int haddr, addr;
+char hex_buffer[180];
+char asc_buffer[180];
+char HEXCHAR[] = "0123456789ABCDEF";
+long *p;
+int l;
+
+ addr = 0;
+ haddr = 0;
+ hex_buffer[0] = 0;
+ asc_buffer[0] = 0;
+ p = (long*) pc;
+ for (i=0; i < size; ) {
+ l = (long) *p;
+ hex_buffer[haddr] = HEXCHAR[(l >> 28) & 0xf];
+ haddr++;
+ hex_buffer[haddr] = HEXCHAR[(l >> 24) & 0xf];
+ haddr++;
+ hex_buffer[haddr] = HEXCHAR[(l >> 20) & 0xf];
+ haddr++;
+ hex_buffer[haddr] = HEXCHAR[(l >> 16) & 0xf];
+ haddr++;
+ hex_buffer[haddr] = HEXCHAR[(l >> 12) & 0xf];
+ haddr++;
+ hex_buffer[haddr] = HEXCHAR[(l >> 8) & 0xf];
+ haddr++;
+ hex_buffer[haddr] = HEXCHAR[(l >> 4) & 0xf];
+ haddr++;
+ hex_buffer[haddr] = HEXCHAR[l & 0x0f];
+ haddr++;
+ hex_buffer[haddr] = ' ';
+ haddr++;
+ hex_buffer[haddr] = 0;
+ p++;
+ i++;
+ if (i%8 == 0) {
+ printk("%4x %s\n", (i-8)*4, hex_buffer);
+ haddr = 0;
+ }
+ }
+ printk("------------------------\n");
+} /* DumpLong */
+
+#endif
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/sk98lin/skgehwt.c b/drivers/net/sk98lin/skgehwt.c
new file mode 100644
index 0000000..f8681a8
--- /dev/null
+++ b/drivers/net/sk98lin/skgehwt.c
@@ -0,0 +1,220 @@
+/******************************************************************************
+ *
+ * Name: skgehwt.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.13 $
+ * Date: $Date: 1999/11/22 13:31:12 $
+ * Purpose: Hardware Timer.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgehwt.c,v $
+ * Revision 1.13 1999/11/22 13:31:12 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.12 1998/10/15 15:11:34 gklug
+ * fix: ID_sccs to SysKonnectFileId
+ *
+ * Revision 1.11 1998/10/08 15:27:51 gklug
+ * chg: correction factor is host clock dependent
+ *
+ * Revision 1.10 1998/09/15 14:18:31 cgoos
+ * Changed more BOOLEANs to SK_xxx
+ *
+ * Revision 1.9 1998/09/15 14:16:06 cgoos
+ * Changed line 107: FALSE to SK_FALSE
+ *
+ * Revision 1.8 1998/08/24 13:04:44 gklug
+ * fix: typo
+ *
+ * Revision 1.7 1998/08/19 09:50:49 gklug
+ * fix: remove struct keyword from c-code (see CCC) add typedefs
+ *
+ * Revision 1.6 1998/08/17 09:59:02 gklug
+ * fix: typos
+ *
+ * Revision 1.5 1998/08/14 07:09:10 gklug
+ * fix: chg pAc -> pAC
+ *
+ * Revision 1.4 1998/08/10 14:14:52 gklug
+ * rmv: unneccessary SK_ADDR macro
+ *
+ * Revision 1.3 1998/08/07 12:53:44 gklug
+ * fix: first compiled version
+ *
+ * Revision 1.2 1998/08/07 09:19:29 gklug
+ * adapt functions to the C coding conventions
+ * rmv unneccessary functions.
+ *
+ * Revision 1.1 1998/08/05 11:28:36 gklug
+ * first version: adapted from SMT/FDDI
+ *
+ *
+ *
+ *
+ ******************************************************************************/
+
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+/*
+ Event queue and dispatcher
+*/
+static const char SysKonnectFileId[] =
+ "$Header: /usr56/projects/ge/schedule/skgehwt.c,v 1.13 1999/11/22 13:31:12 cgoos Exp $" ;
+
+#include "h/skdrv1st.h" /* Driver Specific Definitions */
+#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */
+
+#ifdef __C2MAN__
+/*
+ Hardware Timer function queue management.
+
+ General Description:
+
+ */
+intro()
+{}
+#endif
+
+/*
+ * Prototypes of local functions.
+ */
+#define SK_HWT_MAX (65000)
+
+/* correction factor */
+#define SK_HWT_FAC (1000 * (SK_U32)pAC->GIni.GIHstClkFact / 100)
+
+/*
+ * Initialize hardware timer.
+ *
+ * Must be called during init level 1.
+ */
+void SkHwtInit(
+SK_AC *pAC, /* Adapters context */
+SK_IOC Ioc) /* IoContext */
+{
+ pAC->Hwt.TStart = 0 ;
+ pAC->Hwt.TStop = 0 ;
+ pAC->Hwt.TActive = SK_FALSE ;
+
+ SkHwtStop(pAC,Ioc) ;
+}
+
+/*
+ *
+ * Start hardware timer (clock ticks are 16us).
+ *
+ */
+void SkHwtStart(
+SK_AC *pAC, /* Adapters context */
+SK_IOC Ioc, /* IoContext */
+SK_U32 Time) /* Time in units of 16us to load the timer with. */
+{
+ SK_U32 Cnt ;
+
+ if (Time > SK_HWT_MAX)
+ Time = SK_HWT_MAX ;
+
+ pAC->Hwt.TStart = Time ;
+ pAC->Hwt.TStop = 0L ;
+
+ Cnt = Time ;
+
+ /*
+ * if time < 16 us
+ * time = 16 us
+ */
+ if (!Cnt) {
+ Cnt++ ;
+ }
+
+ SK_OUT32(Ioc, B2_TI_INI, Cnt * SK_HWT_FAC) ;
+ SK_OUT16(Ioc, B2_TI_CRTL, TIM_START) ; /* Start timer. */
+
+ pAC->Hwt.TActive = SK_TRUE ;
+}
+
+/*
+ * Stop hardware timer.
+ * and clear the timer IRQ
+ */
+void SkHwtStop(
+SK_AC *pAC, /* Adapters context */
+SK_IOC Ioc) /* IoContext */
+{
+ SK_OUT16(Ioc, B2_TI_CRTL, TIM_STOP) ;
+ SK_OUT16(Ioc, B2_TI_CRTL, TIM_CLR_IRQ) ;
+
+ pAC->Hwt.TActive = SK_FALSE ;
+}
+
+
+/*
+ * Stop hardware timer and read time elapsed since last start.
+ *
+ * returns
+ * The elapsed time since last start in units of 16us.
+ *
+ */
+SK_U32 SkHwtRead(
+SK_AC *pAC, /* Adapters context */
+SK_IOC Ioc) /* IoContext */
+{
+ SK_U32 TRead ;
+ SK_U32 IStatus ;
+
+ if (pAC->Hwt.TActive) {
+ SkHwtStop(pAC,Ioc) ;
+
+ SK_IN32(Ioc, B2_TI_VAL, &TRead);
+ TRead /= SK_HWT_FAC;
+
+ SK_IN32(Ioc, B0_ISRC, &IStatus);
+
+ /* Check if timer expired (or wraparound). */
+ if ((TRead > pAC->Hwt.TStart) || (IStatus & IS_TIMINT)) {
+ SkHwtStop(pAC,Ioc) ;
+ pAC->Hwt.TStop = pAC->Hwt.TStart ;
+ } else {
+ pAC->Hwt.TStop = pAC->Hwt.TStart - TRead ;
+ }
+ }
+ return (pAC->Hwt.TStop) ;
+}
+
+/*
+ * interrupt source= timer
+ */
+void SkHwtIsr(
+SK_AC *pAC, /* Adapters context */
+SK_IOC Ioc) /* IoContext */
+{
+ SkHwtStop(pAC,Ioc);
+ pAC->Hwt.TStop = pAC->Hwt.TStart;
+ SkTimerDone(pAC,Ioc) ;
+}
+
+#endif /* CONFIG_SK98 */
+
+/* End of file */
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
new file mode 100644
index 0000000..a18dc0a
--- /dev/null
+++ b/drivers/net/sk98lin/skgeinit.c
@@ -0,0 +1,2372 @@
+/******************************************************************************
+ *
+ * Name: skgeinit.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.85 $
+ * Date: $Date: 2003/02/05 15:30:33 $
+ * Purpose: Contains functions to initialize the GE HW
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgeinit.c,v $
+ * Revision 1.85 2003/02/05 15:30:33 rschmidt
+ * Corrected setting of GIHstClkFact (Host Clock Factor) and
+ * GIPollTimerVal (Descr. Poll Timer Init Value) for YUKON.
+ * Editorial changes.
+ *
+ * Revision 1.84 2003/01/28 09:57:25 rschmidt
+ * Added detection of YUKON-Lite Rev. A0 (stored in GIYukonLite).
+ * Disabled Rx GMAC FIFO Flush for YUKON-Lite Rev. A0.
+ * Added support for CLK_RUN (YUKON-Lite).
+ * Added additional check of PME from D3cold for setting GIVauxAvail.
+ * Editorial changes.
+ *
+ * Revision 1.83 2002/12/17 16:15:41 rschmidt
+ * Added default setting of PhyType (Copper) for YUKON.
+ * Added define around check for HW self test results.
+ * Editorial changes.
+ *
+ * Revision 1.82 2002/12/05 13:40:21 rschmidt
+ * Added setting of Rx GMAC FIFO Flush Mask register.
+ * Corrected PhyType with new define SK_PHY_MARV_FIBER when
+ * YUKON Fiber board was found.
+ * Editorial changes.
+ *
+ * Revision 1.81 2002/11/15 12:48:35 rschmidt
+ * Replaced message SKERR_HWI_E018 with SKERR_HWI_E024 for Rx queue error
+ * in SkGeStopPort().
+ * Added init for pAC->GIni.GIGenesis with SK_FALSE in YUKON-branch.
+ * Editorial changes.
+ *
+ * Revision 1.80 2002/11/12 17:28:30 rschmidt
+ * Initialized GIPciSlot64 and GIPciClock66 in SkGeInit1().
+ * Reduced PCI FIFO watermarks for 32bit/33MHz bus in SkGeInitBmu().
+ * Editorial changes.
+ *
+ * Revision 1.79 2002/10/21 09:31:02 mkarl
+ * Changed SkGeInitAssignRamToQueues(), removed call to
+ * SkGeInitAssignRamToQueues in SkGeInit1 and fixed compiler warning in
+ * SkGeInit1.
+ *
+ * Revision 1.78 2002/10/16 15:55:07 mkarl
+ * Fixed a bug in SkGeInitAssignRamToQueues.
+ *
+ * Revision 1.77 2002/10/14 15:07:22 rschmidt
+ * Corrected timeout handling for Rx queue in SkGeStopPort() (#10748)
+ * Editorial changes.
+ *
+ * Revision 1.76 2002/10/11 09:24:38 mkarl
+ * Added check for HW self test results.
+ *
+ * Revision 1.75 2002/10/09 16:56:44 mkarl
+ * Now call SkGeInitAssignRamToQueues() in Init Level 1 in order to assign
+ * the adapter memory to the queues. This default assignment is not suitable
+ * for dual net mode.
+ *
+ * Revision 1.74 2002/09/12 08:45:06 rwahl
+ * Set defaults for PMSCap, PLinkSpeed & PLinkSpeedCap dependent on PHY.
+ *
+ * Revision 1.73 2002/08/16 15:19:45 rschmidt
+ * Corrected check for Tx queues in SkGeCheckQSize().
+ * Added init for new entry GIGenesis and GICopperType
+ * Replaced all if(GIChipId == CHIP_ID_GENESIS) with new entry GIGenesis.
+ * Replaced wrong 1st para pAC with IoC in SK_IN/OUT macros.
+ *
+ * Revision 1.72 2002/08/12 13:38:55 rschmidt
+ * Added check if VAUX is available (stored in GIVauxAvail)
+ * Initialized PLinkSpeedCap in Port struct with SK_LSPEED_CAP_1000MBPS
+ * Editorial changes.
+ *
+ * Revision 1.71 2002/08/08 16:32:58 rschmidt
+ * Added check for Tx queues in SkGeCheckQSize().
+ * Added start of Time Stamp Timer (YUKON) in SkGeInit2().
+ * Editorial changes.
+ *
+ * Revision 1.70 2002/07/23 16:04:26 rschmidt
+ * Added init for GIWolOffs (HW-Bug in YUKON 1st rev.)
+ * Minor changes
+ *
+ * Revision 1.69 2002/07/17 17:07:08 rwahl
+ * - SkGeInit1(): fixed PHY type debug output; corrected init of GIFunc
+ * table & GIMacType.
+ * - Editorial changes.
+ *
+ * Revision 1.68 2002/07/15 18:38:31 rwahl
+ * Added initialization for MAC type dependent function table.
+ *
+ * Revision 1.67 2002/07/15 15:45:39 rschmidt
+ * Added Tx Store & Forward for YUKON (GMAC Tx FIFO is only 1 kB)
+ * Replaced SK_PHY_MARV by SK_PHY_MARV_COPPER
+ * Editorial changes
+ *
+ * Revision 1.66 2002/06/10 09:35:08 rschmidt
+ * Replaced C++ comments (//)
+ * Editorial changes
+ *
+ * Revision 1.65 2002/06/05 08:33:37 rschmidt
+ * Changed GIRamSize and Reset sequence for YUKON.
+ * SkMacInit() replaced by SkXmInitMac() resp. SkGmInitMac()
+ *
+ * Revision 1.64 2002/04/25 13:03:20 rschmidt
+ * Changes for handling YUKON.
+ * Removed reference to xmac_ii.h (not necessary).
+ * Moved all defines into header file.
+ * Replaced all SkXm...() functions with SkMac...() to handle also
+ * YUKON's GMAC.
+ * Added handling for GMAC FIFO in SkGeInitMacFifo(), SkGeStopPort().
+ * Removed 'goto'-directive from SkGeCfgSync(), SkGeCheckQSize().
+ * Replaced all XMAC-access macros by functions: SkMacRxTxDisable(),
+ * SkMacFlushTxFifo().
+ * Optimized timeout handling in SkGeStopPort().
+ * Initialized PLinkSpeed in Port struct with SK_LSPEED_AUTO.
+ * Release of GMAC Link Control reset in SkGeInit1().
+ * Initialized GIChipId and GIChipRev in GE Init structure.
+ * Added GIRamSize and PhyType values for YUKON.
+ * Removed use of PRxCmd to setup XMAC.
+ * Moved setting of XM_RX_DIS_CEXT to SkXmInitMac().
+ * Use of SkGeXmitLED() only for GENESIS.
+ * Changes for V-CPU support.
+ * Editorial changes.
+ *
+ * Revision 1.63 2001/04/05 11:02:09 rassmann
+ * Stop Port check of the STOP bit did not take 2/18 sec as wanted.
+ *
+ * Revision 1.62 2001/02/07 07:54:21 rassmann
+ * Corrected copyright.
+ *
+ * Revision 1.61 2001/01/31 15:31:40 gklug
+ * fix: problem with autosensing an SR8800 switch
+ *
+ * Revision 1.60 2000/10/18 12:22:21 cgoos
+ * Added workaround for half duplex hangup.
+ *
+ * Revision 1.59 2000/10/10 11:22:06 gklug
+ * add: in manual half duplex mode ignore carrier extension errors
+ *
+ * Revision 1.58 2000/10/02 14:10:27 rassmann
+ * Reading BCOM PHY after releasing reset until it returns a valid value.
+ *
+ * Revision 1.57 2000/08/03 14:55:28 rassmann
+ * Waiting for I2C to be ready before de-initializing adapter
+ * (prevents sensors from hanging up).
+ *
+ * Revision 1.56 2000/07/27 12:16:48 gklug
+ * fix: Stop Port check of the STOP bit does now take 2/18 sec as wanted
+ *
+ * Revision 1.55 1999/11/22 13:32:26 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.54 1999/10/26 07:32:54 malthoff
+ * Initialize PHWLinkUp with SK_FALSE. Required for Diagnostics.
+ *
+ * Revision 1.53 1999/08/12 19:13:50 malthoff
+ * Fix for 1000BT. Do not owerwrite XM_MMU_CMD when
+ * disabling receiver and transmitter. Other bits
+ * may be lost.
+ *
+ * Revision 1.52 1999/07/01 09:29:54 gklug
+ * fix: DoInitRamQueue needs pAC
+ *
+ * Revision 1.51 1999/07/01 08:42:21 gklug
+ * chg: use Store & forward for RAM buffer when Jumbos are used
+ *
+ * Revision 1.50 1999/05/27 13:19:38 cgoos
+ * Added Tx PCI watermark initialization.
+ * Removed Tx RAM queue Store & Forward setting.
+ *
+ * Revision 1.49 1999/05/20 14:32:45 malthoff
+ * SkGeLinkLED() is completly removed now.
+ *
+ * Revision 1.48 1999/05/19 07:28:24 cgoos
+ * SkGeLinkLED no more available for drivers.
+ * Changes for 1000Base-T.
+ *
+ * Revision 1.47 1999/04/08 13:57:45 gklug
+ * add: Init of new port struct fiels PLinkResCt
+ * chg: StopPort Timer check
+ *
+ * Revision 1.46 1999/03/25 07:42:15 malthoff
+ * SkGeStopPort(): Add workaround for cache incoherency.
+ * Create error log entry, disable port, and
+ * exit loop if it does not terminate.
+ * Add XM_RX_LENERR_OK to the default value for the
+ * XMAC receive command register.
+ *
+ * Revision 1.45 1999/03/12 16:24:47 malthoff
+ * Remove PPollRxD and PPollTxD.
+ * Add check for GIPollTimerVal.
+ *
+ * Revision 1.44 1999/03/12 13:40:23 malthoff
+ * Fix: SkGeXmitLED(), SK_LED_TST mode does not work.
+ * Add: Jumbo frame support.
+ * Chg: Resolution of parameter IntTime in SkGeCfgSync().
+ *
+ * Revision 1.43 1999/02/09 10:29:46 malthoff
+ * Bugfix: The previous modification again also for the second location.
+ *
+ * Revision 1.42 1999/02/09 09:35:16 malthoff
+ * Bugfix: The bits '66 MHz Capable' and 'NEWCAP are reset while
+ * clearing the error bits in the PCI status register.
+ *
+ * Revision 1.41 1999/01/18 13:07:02 malthoff
+ * Bugfix: Do not use CFG cycles after during Init- or Runtime, because
+ * they may not be available after Boottime.
+ *
+ * Revision 1.40 1999/01/11 12:40:49 malthoff
+ * Bug fix: PCI_STATUS: clearing error bits sets the UDF bit.
+ *
+ * Revision 1.39 1998/12/11 15:17:33 gklug
+ * chg: Init LipaAutoNeg with Unknown
+ *
+ * Revision 1.38 1998/12/10 11:02:57 malthoff
+ * Disable Error Log Message when calling SkGeInit(level 2)
+ * more than once.
+ *
+ * Revision 1.37 1998/12/07 12:18:25 gklug
+ * add: refinement of autosense mode: take into account the autoneg cap of LiPa
+ *
+ * Revision 1.36 1998/12/07 07:10:39 gklug
+ * fix: init values of LinkBroken/ Capabilities for management
+ *
+ * Revision 1.35 1998/12/02 10:56:20 gklug
+ * fix: do NOT init LoinkSync Counter.
+ *
+ * Revision 1.34 1998/12/01 10:53:21 gklug
+ * add: init of additional Counters for workaround
+ *
+ * Revision 1.33 1998/12/01 10:00:49 gklug
+ * add: init PIsave var in Port struct
+ *
+ * Revision 1.32 1998/11/26 14:50:40 gklug
+ * chg: Default is autosensing with AUTOFULL mode
+ *
+ * Revision 1.31 1998/11/25 15:36:16 gklug
+ * fix: do NOT stop LED Timer when port should be stopped
+ *
+ * Revision 1.30 1998/11/24 13:15:28 gklug
+ * add: Init PCkeckPar struct member
+ *
+ * Revision 1.29 1998/11/18 13:19:27 malthoff
+ * Disable packet arbiter timeouts on receive side.
+ * Use maximum timeout value for packet arbiter
+ * transmit timeouts.
+ * Add TestStopBit() function to handle stop RX/TX
+ * problem with active descriptor poll timers.
+ * Bug Fix: Descriptor Poll Timer not started, because
+ * GIPollTimerVal was initialized with 0.
+ *
+ * Revision 1.28 1998/11/13 14:24:26 malthoff
+ * Bug Fix: SkGeStopPort() may hang if a Packet Arbiter Timout
+ * is pending or occurs while waiting for TX_STOP and RX_STOP.
+ * The PA timeout is cleared now while waiting for TX- or RX_STOP.
+ *
+ * Revision 1.27 1998/11/02 11:04:36 malthoff
+ * fix the last fix
+ *
+ * Revision 1.26 1998/11/02 10:37:03 malthoff
+ * Fix: SkGePollTxD() enables always the synchronounous poll timer.
+ *
+ * Revision 1.25 1998/10/28 07:12:43 cgoos
+ * Fixed "LED_STOP" in SkGeLnkSyncCnt, "== SK_INIT_IO" in SkGeInit.
+ * Removed: Reset of RAM Interface in SkGeStopPort.
+ *
+ * Revision 1.24 1998/10/27 08:13:12 malthoff
+ * Remove temporary code.
+ *
+ * Revision 1.23 1998/10/26 07:45:03 malthoff
+ * Add Address Calculation Workaround: If the EPROM byte
+ * Id is 3, the address offset is 512 kB.
+ * Initialize default values for PLinkMode and PFlowCtrlMode.
+ *
+ * Revision 1.22 1998/10/22 09:46:47 gklug
+ * fix SysKonnectFileId typo
+ *
+ * Revision 1.21 1998/10/20 12:11:56 malthoff
+ * Don't dendy the Queue config if the size of the unused
+ * Rx qeueu is zero.
+ *
+ * Revision 1.20 1998/10/19 07:27:58 malthoff
+ * SkGeInitRamIface() is public to be called by diagnostics.
+ *
+ * Revision 1.19 1998/10/16 13:33:45 malthoff
+ * Fix: enabling descriptor polling is not allowed until
+ * the descriptor addresses are set. Descriptor polling
+ * must be handled by the driver.
+ *
+ * Revision 1.18 1998/10/16 10:58:27 malthoff
+ * Remove temp. code for Diag prototype.
+ * Remove lint warning for dummy reads.
+ * Call SkGeLoadLnkSyncCnt() during SkGeInitPort().
+ *
+ * Revision 1.17 1998/10/14 09:16:06 malthoff
+ * Change parameter LimCount and programming of
+ * the limit counter in SkGeCfgSync().
+ *
+ * Revision 1.16 1998/10/13 09:21:16 malthoff
+ * Don't set XM_RX_SELF_RX in RxCmd Reg, because it's
+ * like a Loopback Mode in half duplex.
+ *
+ * Revision 1.15 1998/10/09 06:47:40 malthoff
+ * SkGeInitMacArb(): set recovery counters init value
+ * to zero although this counters are not uesd.
+ * Bug fix in Rx Upper/Lower Pause Threshold calculation.
+ * Add XM_RX_SELF_RX to RxCmd.
+ *
+ * Revision 1.14 1998/10/06 15:15:53 malthoff
+ * Make sure no pending IRQ is cleared in SkGeLoadLnkSyncCnt().
+ *
+ * Revision 1.13 1998/10/06 14:09:36 malthoff
+ * Add SkGeLoadLnkSyncCnt(). Modify
+ * the 'port stopped' condition according
+ * to the current problem report.
+ *
+ * Revision 1.12 1998/10/05 08:17:21 malthoff
+ * Add functions: SkGePollRxD(), SkGePollTxD(),
+ * DoCalcAddr(), SkGeCheckQSize(),
+ * DoInitRamQueue(), and SkGeCfgSync().
+ * Add coding for SkGeInitMacArb(), SkGeInitPktArb(),
+ * SkGeInitMacFifo(), SkGeInitRamBufs(),
+ * SkGeInitRamIface(), and SkGeInitBmu().
+ *
+ * Revision 1.11 1998/09/29 08:26:29 malthoff
+ * bug fix: SkGeInit0() 'i' should be increment.
+ *
+ * Revision 1.10 1998/09/28 13:19:01 malthoff
+ * Coding time: Save the done work.
+ * Modify SkGeLinkLED(), add SkGeXmitLED(),
+ * define SkGeCheckQSize(), SkGeInitMacArb(),
+ * SkGeInitPktArb(), SkGeInitMacFifo(),
+ * SkGeInitRamBufs(), SkGeInitRamIface(),
+ * and SkGeInitBmu(). Do coding for SkGeStopPort(),
+ * SkGeInit1(), SkGeInit2(), and SkGeInit3().
+ * Do coding for SkGeDinit() and SkGeInitPort().
+ *
+ * Revision 1.9 1998/09/16 14:29:05 malthoff
+ * Some minor changes.
+ *
+ * Revision 1.8 1998/09/11 05:29:14 gklug
+ * add: init state of a port
+ *
+ * Revision 1.7 1998/09/04 09:26:25 malthoff
+ * Short temporary modification.
+ *
+ * Revision 1.6 1998/09/04 08:27:59 malthoff
+ * Remark the do-while in StopPort() because it never ends
+ * without a GE adapter.
+ *
+ * Revision 1.5 1998/09/03 14:05:45 malthoff
+ * Change comment for SkGeInitPort(). Do not
+ * repair the queue sizes if invalid.
+ *
+ * Revision 1.4 1998/09/03 10:03:19 malthoff
+ * Implement the new interface according to the
+ * reviewed interface specification.
+ *
+ * Revision 1.3 1998/08/19 09:11:25 gklug
+ * fix: struct are removed from c-source (see CCC)
+ *
+ * Revision 1.2 1998/07/28 12:33:58 malthoff
+ * Add 'IoC' parameter in function declaration and SK IO macros.
+ *
+ * Revision 1.1 1998/07/23 09:48:57 malthoff
+ * Creation. First dummy 'C' file.
+ * SkGeInit(Level 0) is card_start for GE.
+ * SkGeDeInit() is card_stop for GE.
+ *
+ *
+ ******************************************************************************/
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+
+/* global variables ***********************************************************/
+
+/* local variables ************************************************************/
+
+static const char SysKonnectFileId[] =
+ "@(#)$Id: skgeinit.c,v 1.85 2003/02/05 15:30:33 rschmidt Exp $ (C) SK ";
+
+struct s_QOffTab {
+ int RxQOff; /* Receive Queue Address Offset */
+ int XsQOff; /* Sync Tx Queue Address Offset */
+ int XaQOff; /* Async Tx Queue Address Offset */
+};
+static struct s_QOffTab QOffTab[] = {
+ {Q_R1, Q_XS1, Q_XA1}, {Q_R2, Q_XS2, Q_XA2}
+};
+
+
+/******************************************************************************
+ *
+ * SkGePollRxD() - Enable / Disable Descriptor Polling of RxD Ring
+ *
+ * Description:
+ * Enable or disable the descriptor polling of the receive descriptor
+ * ring (RxD) for port 'Port'.
+ * The new configuration is *not* saved over any SkGeStopPort() and
+ * SkGeInitPort() calls.
+ *
+ * Returns:
+ * nothing
+ */
+void SkGePollRxD(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL PollRxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
+{
+ SK_GEPORT *pPrt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), (PollRxD) ?
+ CSR_ENA_POL : CSR_DIS_POL);
+} /* SkGePollRxD */
+
+
+/******************************************************************************
+ *
+ * SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings
+ *
+ * Description:
+ * Enable or disable the descriptor polling of the transmit descriptor
+ * ring(s) (TxD) for port 'Port'.
+ * The new configuration is *not* saved over any SkGeStopPort() and
+ * SkGeInitPort() calls.
+ *
+ * Returns:
+ * nothing
+ */
+void SkGePollTxD(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL PollTxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
+{
+ SK_GEPORT *pPrt;
+ SK_U32 DWord;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ DWord = (PollTxD) ? CSR_ENA_POL : CSR_DIS_POL;
+
+ if (pPrt->PXSQSize != 0) {
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), DWord);
+ }
+
+ if (pPrt->PXAQSize != 0) {
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), DWord);
+ }
+} /* SkGePollTxD */
+
+
+/******************************************************************************
+ *
+ * SkGeYellowLED() - Switch the yellow LED on or off.
+ *
+ * Description:
+ * Switch the yellow LED on or off.
+ *
+ * Note:
+ * This function may be called any time after SkGeInit(Level 1).
+ *
+ * Returns:
+ * nothing
+ */
+void SkGeYellowLED(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int State) /* yellow LED state, 0 = OFF, 0 != ON */
+{
+ if (State == 0) {
+ /* Switch yellow LED OFF */
+ SK_OUT8(IoC, B0_LED, LED_STAT_OFF);
+ }
+ else {
+ /* Switch yellow LED ON */
+ SK_OUT8(IoC, B0_LED, LED_STAT_ON);
+ }
+} /* SkGeYellowLED */
+
+
+/******************************************************************************
+ *
+ * SkGeXmitLED() - Modify the Operational Mode of a transmission LED.
+ *
+ * Description:
+ * The Rx or Tx LED which is specified by 'Led' will be
+ * enabled, disabled or switched on in test mode.
+ *
+ * Note:
+ * 'Led' must contain the address offset of the LEDs INI register.
+ *
+ * Usage:
+ * SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
+ *
+ * Returns:
+ * nothing
+ */
+void SkGeXmitLED(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Led, /* offset to the LED Init Value register */
+int Mode) /* Mode may be SK_LED_DIS, SK_LED_ENA, SK_LED_TST */
+{
+ SK_U32 LedIni;
+
+ switch (Mode) {
+ case SK_LED_ENA:
+ LedIni = SK_XMIT_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
+ SK_OUT32(IoC, Led + XMIT_LED_INI, LedIni);
+ SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
+ break;
+ case SK_LED_TST:
+ SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_ON);
+ SK_OUT32(IoC, Led + XMIT_LED_CNT, 100);
+ SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
+ break;
+ case SK_LED_DIS:
+ default:
+ /*
+ * Do NOT stop the LED Timer here. The LED might be
+ * in on state. But it needs to go off.
+ */
+ SK_OUT32(IoC, Led + XMIT_LED_CNT, 0);
+ SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_OFF);
+ break;
+ }
+
+ /*
+ * 1000BT: The Transmit LED is driven by the PHY.
+ * But the default LED configuration is used for
+ * Level One and Broadcom PHYs.
+ * (Broadcom: It may be that PHY_B_PEC_EN_LTR has to be set.)
+ * (In this case it has to be added here. But we will see. XXX)
+ */
+} /* SkGeXmitLED */
+
+
+/******************************************************************************
+ *
+ * DoCalcAddr() - Calculates the start and the end address of a queue.
+ *
+ * Description:
+ * This function calculates the start and the end address of a queue.
+ * Afterwards the 'StartVal' is incremented to the next start position.
+ * If the port is already initialized the calculated values
+ * will be checked against the configured values and an
+ * error will be returned, if they are not equal.
+ * If the port is not initialized the values will be written to
+ * *StartAdr and *EndAddr.
+ *
+ * Returns:
+ * 0: success
+ * 1: configuration error
+ */
+static int DoCalcAddr(
+SK_AC *pAC, /* adapter context */
+SK_GEPORT *pPrt, /* port index */
+int QuSize, /* size of the queue to configure in kB */
+SK_U32 *StartVal, /* start value for address calculation */
+SK_U32 *QuStartAddr, /* start addr to calculate */
+SK_U32 *QuEndAddr) /* end address to calculate */
+{
+ SK_U32 EndVal;
+ SK_U32 NextStart;
+ int Rtv;
+
+ Rtv = 0;
+ if (QuSize == 0) {
+ EndVal = *StartVal;
+ NextStart = EndVal;
+ }
+ else {
+ EndVal = *StartVal + ((SK_U32)QuSize * 1024) - 1;
+ NextStart = EndVal + 1;
+ }
+
+ if (pPrt->PState >= SK_PRT_INIT) {
+ if (*StartVal != *QuStartAddr || EndVal != *QuEndAddr) {
+ Rtv = 1;
+ }
+ }
+ else {
+ *QuStartAddr = *StartVal;
+ *QuEndAddr = EndVal;
+ }
+
+ *StartVal = NextStart;
+ return(Rtv);
+} /* DoCalcAddr */
+
+/******************************************************************************
+ *
+ * SkGeInitAssignRamToQueues() - allocate default queue sizes
+ *
+ * Description:
+ * This function assigns the memory to the different queues and ports.
+ * When DualNet is set to SK_TRUE all ports get the same amount of memory.
+ * Otherwise the first port gets most of the memory and all the
+ * other ports just the required minimum.
+ * This function can only be called when pAC->GIni.GIRamSize and
+ * pAC->GIni.GIMacsFound have been initialized, usually this happens
+ * at init level 1
+ *
+ * Returns:
+ * 0 - ok
+ * 1 - invalid input values
+ * 2 - not enough memory
+ */
+
+int SkGeInitAssignRamToQueues(
+SK_AC *pAC, /* Adapter context */
+int ActivePort, /* Active Port in RLMT mode */
+SK_BOOL DualNet) /* adapter context */
+{
+ int i;
+ int UsedKilobytes; /* memory already assigned */
+ int ActivePortKilobytes; /* memory available for active port */
+ SK_GEPORT *pGePort;
+
+ UsedKilobytes = 0;
+
+ if (ActivePort >= pAC->GIni.GIMacsFound) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
+ ("SkGeInitAssignRamToQueues: ActivePort (%d) invalid\n",
+ ActivePort));
+ return(1);
+ }
+ if (((pAC->GIni.GIMacsFound * (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE)) +
+ ((RAM_QUOTA_SYNC == 0) ? 0 : SK_MIN_TXQ_SIZE)) > pAC->GIni.GIRamSize) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
+ ("SkGeInitAssignRamToQueues: Not enough memory (%d)\n",
+ pAC->GIni.GIRamSize));
+ return(2);
+ }
+
+
+ if (DualNet) {
+ /* every port gets the same amount of memory */
+ ActivePortKilobytes = pAC->GIni.GIRamSize / pAC->GIni.GIMacsFound;
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+
+ pGePort = &pAC->GIni.GP[i];
+
+ /* take away the minimum memory for active queues */
+ ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
+
+ /* receive queue gets the minimum + 80% of the rest */
+ pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((
+ ActivePortKilobytes * (unsigned long) RAM_QUOTA_RX) / 100))
+ + SK_MIN_RXQ_SIZE;
+
+ ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
+
+ /* synchronous transmit queue */
+ pGePort->PXSQSize = 0;
+
+ /* asynchronous transmit queue */
+ pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes +
+ SK_MIN_TXQ_SIZE);
+ }
+ }
+ else {
+ /* Rlmt Mode or single link adapter */
+
+ /* Set standby queue size defaults for all standby ports */
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+
+ if (i != ActivePort) {
+ pGePort = &pAC->GIni.GP[i];
+
+ pGePort->PRxQSize = SK_MIN_RXQ_SIZE;
+ pGePort->PXAQSize = SK_MIN_TXQ_SIZE;
+ pGePort->PXSQSize = 0;
+
+ /* Count used RAM */
+ UsedKilobytes += pGePort->PRxQSize + pGePort->PXAQSize;
+ }
+ }
+ /* what's left? */
+ ActivePortKilobytes = pAC->GIni.GIRamSize - UsedKilobytes;
+
+ /* assign it to the active port */
+ /* first take away the minimum memory */
+ ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
+ pGePort = &pAC->GIni.GP[ActivePort];
+
+ /* receive queue get's the minimum + 80% of the rest */
+ pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((ActivePortKilobytes *
+ (unsigned long) RAM_QUOTA_RX) / 100)) + SK_MIN_RXQ_SIZE;
+
+ ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
+
+ /* synchronous transmit queue */
+ pGePort->PXSQSize = 0;
+
+ /* asynchronous transmit queue */
+ pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes) +
+ SK_MIN_TXQ_SIZE;
+ }
+#ifdef VCPU
+ VCPUprintf(0, "PRxQSize=%u, PXSQSize=%u, PXAQSize=%u\n",
+ pGePort->PRxQSize, pGePort->PXSQSize, pGePort->PXAQSize);
+#endif /* VCPU */
+
+ return(0);
+} /* SkGeInitAssignRamToQueues */
+
+/******************************************************************************
+ *
+ * SkGeCheckQSize() - Checks the Adapters Queue Size Configuration
+ *
+ * Description:
+ * This function verifies the Queue Size Configuration specified
+ * in the variables PRxQSize, PXSQSize, and PXAQSize of all
+ * used ports.
+ * This requirements must be fullfilled to have a valid configuration:
+ * - The size of all queues must not exceed GIRamSize.
+ * - The queue sizes must be specified in units of 8 kB.
+ * - The size of Rx queues of available ports must not be
+ * smaller than 16 kB.
+ * - The size of at least one Tx queue (synch. or asynch.)
+ * of available ports must not be smaller than 16 kB
+ * when Jumbo Frames are used.
+ * - The RAM start and end addresses must not be changed
+ * for ports which are already initialized.
+ * Furthermore SkGeCheckQSize() defines the Start and End Addresses
+ * of all ports and stores them into the HWAC port structure.
+ *
+ * Returns:
+ * 0: Queue Size Configuration valid
+ * 1: Queue Size Configuration invalid
+ */
+static int SkGeCheckQSize(
+SK_AC *pAC, /* adapter context */
+int Port) /* port index */
+{
+ SK_GEPORT *pPrt;
+ int UsedMem; /* total memory used (max. found ports) */
+ int i;
+ int Rtv;
+ int Rtv2;
+ SK_U32 StartAddr;
+
+ UsedMem = 0;
+ Rtv = 0;
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+ pPrt = &pAC->GIni.GP[i];
+
+ if ((pPrt->PRxQSize & QZ_UNITS) != 0 ||
+ (pPrt->PXSQSize & QZ_UNITS) != 0 ||
+ (pPrt->PXAQSize & QZ_UNITS) != 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
+ return(1);
+ }
+
+ if (i == Port && pPrt->PRxQSize < SK_MIN_RXQ_SIZE) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E011, SKERR_HWI_E011MSG);
+ return(1);
+ }
+
+ /*
+ * the size of at least one Tx queue (synch. or asynch.) has to be > 0.
+ * if Jumbo Frames are used, this size has to be >= 16 kB.
+ */
+ if ((i == Port && pPrt->PXSQSize == 0 && pPrt->PXAQSize == 0) ||
+ (pAC->GIni.GIPortUsage == SK_JUMBO_LINK &&
+ ((pPrt->PXSQSize > 0 && pPrt->PXSQSize < SK_MIN_TXQ_SIZE) ||
+ (pPrt->PXAQSize > 0 && pPrt->PXAQSize < SK_MIN_TXQ_SIZE)))) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E023, SKERR_HWI_E023MSG);
+ return(1);
+ }
+
+ UsedMem += pPrt->PRxQSize + pPrt->PXSQSize + pPrt->PXAQSize;
+ }
+
+ if (UsedMem > pAC->GIni.GIRamSize) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
+ return(1);
+ }
+
+ /* Now start address calculation */
+ StartAddr = pAC->GIni.GIRamOffs;
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+ pPrt = &pAC->GIni.GP[i];
+
+ /* Calculate/Check values for the receive queue */
+ Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PRxQSize, &StartAddr,
+ &pPrt->PRxQRamStart, &pPrt->PRxQRamEnd);
+ Rtv |= Rtv2;
+
+ /* Calculate/Check values for the synchronous Tx queue */
+ Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXSQSize, &StartAddr,
+ &pPrt->PXsQRamStart, &pPrt->PXsQRamEnd);
+ Rtv |= Rtv2;
+
+ /* Calculate/Check values for the asynchronous Tx queue */
+ Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXAQSize, &StartAddr,
+ &pPrt->PXaQRamStart, &pPrt->PXaQRamEnd);
+ Rtv |= Rtv2;
+
+ if (Rtv) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E013, SKERR_HWI_E013MSG);
+ return(1);
+ }
+ }
+
+ return(0);
+} /* SkGeCheckQSize */
+
+
+/******************************************************************************
+ *
+ * SkGeInitMacArb() - Initialize the MAC Arbiter
+ *
+ * Description:
+ * This function initializes the MAC Arbiter.
+ * It must not be called if there is still an
+ * initialized or active port.
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInitMacArb(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ /* release local reset */
+ SK_OUT16(IoC, B3_MA_TO_CTRL, MA_RST_CLR);
+
+ /* configure timeout values */
+ SK_OUT8(IoC, B3_MA_TOINI_RX1, SK_MAC_TO_53);
+ SK_OUT8(IoC, B3_MA_TOINI_RX2, SK_MAC_TO_53);
+ SK_OUT8(IoC, B3_MA_TOINI_TX1, SK_MAC_TO_53);
+ SK_OUT8(IoC, B3_MA_TOINI_TX2, SK_MAC_TO_53);
+
+ SK_OUT8(IoC, B3_MA_RCINI_RX1, 0);
+ SK_OUT8(IoC, B3_MA_RCINI_RX2, 0);
+ SK_OUT8(IoC, B3_MA_RCINI_TX1, 0);
+ SK_OUT8(IoC, B3_MA_RCINI_TX2, 0);
+
+ /* recovery values are needed for XMAC II Rev. B2 only */
+ /* Fast Output Enable Mode was intended to use with Rev. B2, but now? */
+
+ /*
+ * There is no start or enable button to push, therefore
+ * the MAC arbiter is configured and enabled now.
+ */
+} /* SkGeInitMacArb */
+
+
+/******************************************************************************
+ *
+ * SkGeInitPktArb() - Initialize the Packet Arbiter
+ *
+ * Description:
+ * This function initializes the Packet Arbiter.
+ * It must not be called if there is still an
+ * initialized or active port.
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInitPktArb(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ /* release local reset */
+ SK_OUT16(IoC, B3_PA_CTRL, PA_RST_CLR);
+
+ /* configure timeout values */
+ SK_OUT16(IoC, B3_PA_TOINI_RX1, SK_PKT_TO_MAX);
+ SK_OUT16(IoC, B3_PA_TOINI_RX2, SK_PKT_TO_MAX);
+ SK_OUT16(IoC, B3_PA_TOINI_TX1, SK_PKT_TO_MAX);
+ SK_OUT16(IoC, B3_PA_TOINI_TX2, SK_PKT_TO_MAX);
+
+ /*
+ * enable timeout timers if jumbo frames not used
+ * NOTE: the packet arbiter timeout interrupt is needed for
+ * half duplex hangup workaround
+ */
+ if (pAC->GIni.GIPortUsage != SK_JUMBO_LINK) {
+ if (pAC->GIni.GIMacsFound == 1) {
+ SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1);
+ }
+ else {
+ SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1 | PA_ENA_TO_TX2);
+ }
+ }
+} /* SkGeInitPktArb */
+
+
+/******************************************************************************
+ *
+ * SkGeInitMacFifo() - Initialize the MAC FIFOs
+ *
+ * Description:
+ * Initialize all MAC FIFOs of the specified port
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInitMacFifo(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_U16 Word;
+#ifdef VCPU
+ SK_U32 DWord;
+#endif /* VCPU */
+ /*
+ * For each FIFO:
+ * - release local reset
+ * - use default value for MAC FIFO size
+ * - setup defaults for the control register
+ * - enable the FIFO
+ */
+
+ Word = GMF_RX_CTRL_DEF;
+
+ if (pAC->GIni.GIGenesis) {
+ /* Configure Rx MAC FIFO */
+ SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_CLR);
+ SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_RX_CTRL_DEF);
+ SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_ENA_OP_MD);
+
+ /* Configure Tx MAC FIFO */
+ SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_CLR);
+ SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF);
+ SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_ENA_OP_MD);
+
+ /* Enable frame flushing if jumbo frames used */
+ if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
+ SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_FLUSH);
+ }
+ }
+ else {
+ /* set Rx GMAC FIFO Flush Mask */
+ SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_MSK), (SK_U16)RX_FF_FL_DEF_MSK);
+
+ if (pAC->GIni.GIYukonLite && pAC->GIni.GIChipId == CHIP_ID_YUKON) {
+
+ Word &= ~GMF_RX_F_FL_ON;
+ }
+
+ /* Configure Rx MAC FIFO */
+ SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
+ SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), Word);
+
+ /* set Rx GMAC FIFO Flush Threshold (default: 0x0a -> 56 bytes) */
+ SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
+
+ /* Configure Tx MAC FIFO */
+ SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
+ SK_OUT16(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U16)GMF_TX_CTRL_DEF);
+
+#ifdef VCPU
+ SK_IN32(IoC, MR_ADDR(Port, RX_GMF_AF_THR), &DWord);
+ SK_IN32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), &DWord);
+#endif /* VCPU */
+
+ /* set Tx GMAC FIFO Almost Empty Threshold */
+/* SK_OUT32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), 0); */
+ }
+} /* SkGeInitMacFifo */
+
+
+/******************************************************************************
+ *
+ * SkGeLoadLnkSyncCnt() - Load the Link Sync Counter and starts counting
+ *
+ * Description:
+ * This function starts the Link Sync Counter of the specified
+ * port and enables the generation of an Link Sync IRQ.
+ * The Link Sync Counter may be used to detect an active link,
+ * if autonegotiation is not used.
+ *
+ * Note:
+ * o To ensure receiving the Link Sync Event the LinkSyncCounter
+ * should be initialized BEFORE clearing the XMAC's reset!
+ * o Enable IS_LNK_SYNC_M1 and IS_LNK_SYNC_M2 after calling this
+ * function.
+ *
+ * Returns:
+ * nothing
+ */
+void SkGeLoadLnkSyncCnt(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_U32 CntVal) /* Counter value */
+{
+ SK_U32 OrgIMsk;
+ SK_U32 NewIMsk;
+ SK_U32 ISrc;
+ SK_BOOL IrqPend;
+
+ /* stop counter */
+ SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_STOP);
+
+ /*
+ * ASIC problem:
+ * Each time starting the Link Sync Counter an IRQ is generated
+ * by the adapter. See problem report entry from 21.07.98
+ *
+ * Workaround: Disable Link Sync IRQ and clear the unexpeced IRQ
+ * if no IRQ is already pending.
+ */
+ IrqPend = SK_FALSE;
+ SK_IN32(IoC, B0_ISRC, &ISrc);
+ SK_IN32(IoC, B0_IMSK, &OrgIMsk);
+ if (Port == MAC_1) {
+ NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M1;
+ if ((ISrc & IS_LNK_SYNC_M1) != 0) {
+ IrqPend = SK_TRUE;
+ }
+ }
+ else {
+ NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M2;
+ if ((ISrc & IS_LNK_SYNC_M2) != 0) {
+ IrqPend = SK_TRUE;
+ }
+ }
+ if (!IrqPend) {
+ SK_OUT32(IoC, B0_IMSK, NewIMsk);
+ }
+
+ /* load counter */
+ SK_OUT32(IoC, MR_ADDR(Port, LNK_SYNC_INI), CntVal);
+
+ /* start counter */
+ SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_START);
+
+ if (!IrqPend) {
+ /* clear the unexpected IRQ, and restore the interrupt mask */
+ SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_CLR_IRQ);
+ SK_OUT32(IoC, B0_IMSK, OrgIMsk);
+ }
+} /* SkGeLoadLnkSyncCnt*/
+
+
+/******************************************************************************
+ *
+ * SkGeCfgSync() - Configure synchronous bandwidth for this port.
+ *
+ * Description:
+ * This function may be used to configure synchronous bandwidth
+ * to the specified port. This may be done any time after
+ * initializing the port. The configuration values are NOT saved
+ * in the HWAC port structure and will be overwritten any
+ * time when stopping and starting the port.
+ * Any values for the synchronous configuration will be ignored
+ * if the size of the synchronous queue is zero!
+ *
+ * The default configuration for the synchronous service is
+ * TXA_ENA_FSYNC. This means if the size of
+ * the synchronous queue is unequal zero but no specific
+ * synchronous bandwidth is configured, the synchronous queue
+ * will always have the 'unlimited' transmit priority!
+ *
+ * This mode will be restored if the synchronous bandwidth is
+ * deallocated ('IntTime' = 0 and 'LimCount' = 0).
+ *
+ * Returns:
+ * 0: success
+ * 1: parameter configuration error
+ * 2: try to configure quality of service although no
+ * synchronous queue is configured
+ */
+int SkGeCfgSync(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_U32 IntTime, /* Interval Timer Value in units of 8ns */
+SK_U32 LimCount, /* Number of bytes to transfer during IntTime */
+int SyncMode) /* Sync Mode: TXA_ENA_ALLOC | TXA_DIS_ALLOC | 0 */
+{
+ int Rtv;
+
+ Rtv = 0;
+
+ /* check the parameters */
+ if (LimCount > IntTime ||
+ (LimCount == 0 && IntTime != 0) ||
+ (LimCount != 0 && IntTime == 0)) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
+ return(1);
+ }
+
+ if (pAC->GIni.GP[Port].PXSQSize == 0) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E009, SKERR_HWI_E009MSG);
+ return(2);
+ }
+
+ /* calculate register values */
+ IntTime = (IntTime / 2) * pAC->GIni.GIHstClkFact / 100;
+ LimCount = LimCount / 8;
+
+ if (IntTime > TXA_MAX_VAL || LimCount > TXA_MAX_VAL) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
+ return(1);
+ }
+
+ /*
+ * - Enable 'Force Sync' to ensure the synchronous queue
+ * has the priority while configuring the new values.
+ * - Also 'disable alloc' to ensure the settings complies
+ * to the SyncMode parameter.
+ * - Disable 'Rate Control' to configure the new values.
+ * - write IntTime and LimCount
+ * - start 'Rate Control' and disable 'Force Sync'
+ * if Interval Timer or Limit Counter not zero.
+ */
+ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
+ TXA_ENA_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
+
+ SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), IntTime);
+ SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), LimCount);
+
+ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
+ (SK_U8)(SyncMode & (TXA_ENA_ALLOC | TXA_DIS_ALLOC)));
+
+ if (IntTime != 0 || LimCount != 0) {
+ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_DIS_FSYNC | TXA_START_RC);
+ }
+
+ return(0);
+} /* SkGeCfgSync */
+
+
+/******************************************************************************
+ *
+ * DoInitRamQueue() - Initialize the RAM Buffer Address of a single Queue
+ *
+ * Desccription:
+ * If the queue is used, enable and initialize it.
+ * Make sure the queue is still reset, if it is not used.
+ *
+ * Returns:
+ * nothing
+ */
+static void DoInitRamQueue(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int QuIoOffs, /* Queue IO Address Offset */
+SK_U32 QuStartAddr, /* Queue Start Address */
+SK_U32 QuEndAddr, /* Queue End Address */
+int QuType) /* Queue Type (SK_RX_SRAM_Q|SK_RX_BRAM_Q|SK_TX_RAM_Q) */
+{
+ SK_U32 RxUpThresVal;
+ SK_U32 RxLoThresVal;
+
+ if (QuStartAddr != QuEndAddr) {
+ /* calculate thresholds, assume we have a big Rx queue */
+ RxUpThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_ULPP) / 8;
+ RxLoThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_LLPP_B)/8;
+
+ /* build HW address format */
+ QuStartAddr = QuStartAddr / 8;
+ QuEndAddr = QuEndAddr / 8;
+
+ /* release local reset */
+ SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_CLR);
+
+ /* configure addresses */
+ SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_START), QuStartAddr);
+ SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_END), QuEndAddr);
+ SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_WP), QuStartAddr);
+ SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RP), QuStartAddr);
+
+ switch (QuType) {
+ case SK_RX_SRAM_Q:
+ /* configure threshold for small Rx Queue */
+ RxLoThresVal += (SK_RB_LLPP_B - SK_RB_LLPP_S) / 8;
+
+ /* continue with SK_RX_BRAM_Q */
+ case SK_RX_BRAM_Q:
+ /* write threshold for Rx Queue */
+
+ SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_UTPP), RxUpThresVal);
+ SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_LTPP), RxLoThresVal);
+
+ /* the high priority threshold not used */
+ break;
+ case SK_TX_RAM_Q:
+ /*
+ * Do NOT use Store & Forward under normal operation due to
+ * performance optimization (GENESIS only).
+ * But if Jumbo Frames are configured (XMAC Tx FIFO is only 4 kB)
+ * or YUKON is used ((GMAC Tx FIFO is only 1 kB)
+ * we NEED Store & Forward of the RAM buffer.
+ */
+ if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK ||
+ !pAC->GIni.GIGenesis) {
+ /* enable Store & Forward Mode for the Tx Side */
+ SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_STFWD);
+ }
+ break;
+ }
+
+ /* set queue operational */
+ SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_OP_MD);
+ }
+ else {
+ /* ensure the queue is still disabled */
+ SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_SET);
+ }
+} /* DoInitRamQueue */
+
+
+/******************************************************************************
+ *
+ * SkGeInitRamBufs() - Initialize the RAM Buffer Queues
+ *
+ * Description:
+ * Initialize all RAM Buffer Queues of the specified port
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInitRamBufs(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ int RxQType;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (pPrt->PRxQSize == SK_MIN_RXQ_SIZE) {
+ RxQType = SK_RX_SRAM_Q; /* small Rx Queue */
+ }
+ else {
+ RxQType = SK_RX_BRAM_Q; /* big Rx Queue */
+ }
+
+ DoInitRamQueue(pAC, IoC, pPrt->PRxQOff, pPrt->PRxQRamStart,
+ pPrt->PRxQRamEnd, RxQType);
+
+ DoInitRamQueue(pAC, IoC, pPrt->PXsQOff, pPrt->PXsQRamStart,
+ pPrt->PXsQRamEnd, SK_TX_RAM_Q);
+
+ DoInitRamQueue(pAC, IoC, pPrt->PXaQOff, pPrt->PXaQRamStart,
+ pPrt->PXaQRamEnd, SK_TX_RAM_Q);
+
+} /* SkGeInitRamBufs */
+
+
+/******************************************************************************
+ *
+ * SkGeInitRamIface() - Initialize the RAM Interface
+ *
+ * Description:
+ * This function initializes the Adapters RAM Interface.
+ *
+ * Note:
+ * This function is used in the diagnostics.
+ *
+ * Returns:
+ * nothing
+ */
+void SkGeInitRamIface(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ /* release local reset */
+ SK_OUT16(IoC, B3_RI_CTRL, RI_RST_CLR);
+
+ /* configure timeout values */
+ SK_OUT8(IoC, B3_RI_WTO_R1, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_WTO_XA1, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_WTO_XS1, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_RTO_R1, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_RTO_XA1, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_RTO_XS1, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_WTO_R2, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_WTO_XA2, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_WTO_XS2, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_RTO_R2, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_RTO_XA2, SK_RI_TO_53);
+ SK_OUT8(IoC, B3_RI_RTO_XS2, SK_RI_TO_53);
+
+} /* SkGeInitRamIface */
+
+
+/******************************************************************************
+ *
+ * SkGeInitBmu() - Initialize the BMU state machines
+ *
+ * Description:
+ * Initialize all BMU state machines of the specified port
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInitBmu(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_U32 RxWm;
+ SK_U32 TxWm;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ RxWm = SK_BMU_RX_WM;
+ TxWm = SK_BMU_TX_WM;
+
+ if (!pAC->GIni.GIPciSlot64 && !pAC->GIni.GIPciClock66) {
+ /* for better performance */
+ RxWm /= 2;
+ TxWm /= 2;
+ }
+
+ /* Rx Queue: Release all local resets and set the watermark */
+ SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_CLR_RESET);
+ SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_F), RxWm);
+
+ /*
+ * Tx Queue: Release all local resets if the queue is used !
+ * set watermark
+ */
+ if (pPrt->PXSQSize != 0) {
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_CLR_RESET);
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_F), TxWm);
+ }
+
+ if (pPrt->PXAQSize != 0) {
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_CLR_RESET);
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_F), TxWm);
+ }
+ /*
+ * Do NOT enable the descriptor poll timers here, because
+ * the descriptor addresses are not specified yet.
+ */
+} /* SkGeInitBmu */
+
+
+/******************************************************************************
+ *
+ * TestStopBit() - Test the stop bit of the queue
+ *
+ * Description:
+ * Stopping a queue is not as simple as it seems to be.
+ * If descriptor polling is enabled, it may happen
+ * that RX/TX stop is done and SV idle is NOT set.
+ * In this case we have to issue another stop command.
+ *
+ * Returns:
+ * The queues control status register
+ */
+static SK_U32 TestStopBit(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO Context */
+int QuIoOffs) /* Queue IO Address Offset */
+{
+ SK_U32 QuCsr; /* CSR contents */
+
+ SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
+
+ if ((QuCsr & (CSR_STOP | CSR_SV_IDLE)) == 0) {
+ /* Stop Descriptor overridden by start command */
+ SK_OUT32(IoC, Q_ADDR(QuIoOffs, Q_CSR), CSR_STOP);
+
+ SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
+ }
+
+ return(QuCsr);
+} /* TestStopBit */
+
+
+/******************************************************************************
+ *
+ * SkGeStopPort() - Stop the Rx/Tx activity of the port 'Port'.
+ *
+ * Description:
+ * After calling this function the descriptor rings and Rx and Tx
+ * queues of this port may be reconfigured.
+ *
+ * It is possible to stop the receive and transmit path separate or
+ * both together.
+ *
+ * Dir = SK_STOP_TX Stops the transmit path only and resets the MAC.
+ * The receive queue is still active and
+ * the pending Rx frames may be still transferred
+ * into the RxD.
+ * SK_STOP_RX Stop the receive path. The tansmit path
+ * has to be stopped once before.
+ * SK_STOP_ALL SK_STOP_TX + SK_STOP_RX
+ *
+ * RstMode = SK_SOFT_RST Resets the MAC. The PHY is still alive.
+ * SK_HARD_RST Resets the MAC and the PHY.
+ *
+ * Example:
+ * 1) A Link Down event was signaled for a port. Therefore the activity
+ * of this port should be stopped and a hardware reset should be issued
+ * to enable the workaround of XMAC errata #2. But the received frames
+ * should not be discarded.
+ * ...
+ * SkGeStopPort(pAC, IoC, Port, SK_STOP_TX, SK_HARD_RST);
+ * (transfer all pending Rx frames)
+ * SkGeStopPort(pAC, IoC, Port, SK_STOP_RX, SK_HARD_RST);
+ * ...
+ *
+ * 2) An event was issued which request the driver to switch
+ * the 'virtual active' link to an other already active port
+ * as soon as possible. The frames in the receive queue of this
+ * port may be lost. But the PHY must not be reset during this
+ * event.
+ * ...
+ * SkGeStopPort(pAC, IoC, Port, SK_STOP_ALL, SK_SOFT_RST);
+ * ...
+ *
+ * Extended Description:
+ * If SK_STOP_TX is set,
+ * o disable the MAC's receive and transmitter to prevent
+ * from sending incomplete frames
+ * o stop the port's transmit queues before terminating the
+ * BMUs to prevent from performing incomplete PCI cycles
+ * on the PCI bus
+ * - The network Rx and Tx activity and PCI Tx transfer is
+ * disabled now.
+ * o reset the MAC depending on the RstMode
+ * o Stop Interval Timer and Limit Counter of Tx Arbiter,
+ * also disable Force Sync bit and Enable Alloc bit.
+ * o perform a local reset of the port's Tx path
+ * - reset the PCI FIFO of the async Tx queue
+ * - reset the PCI FIFO of the sync Tx queue
+ * - reset the RAM Buffer async Tx queue
+ * - reset the RAM Buffer sync Tx queue
+ * - reset the MAC Tx FIFO
+ * o switch Link and Tx LED off, stop the LED counters
+ *
+ * If SK_STOP_RX is set,
+ * o stop the port's receive queue
+ * - The path data transfer activity is fully stopped now.
+ * o perform a local reset of the port's Rx path
+ * - reset the PCI FIFO of the Rx queue
+ * - reset the RAM Buffer receive queue
+ * - reset the MAC Rx FIFO
+ * o switch Rx LED off, stop the LED counter
+ *
+ * If all ports are stopped,
+ * o reset the RAM Interface.
+ *
+ * Notes:
+ * o This function may be called during the driver states RESET_PORT and
+ * SWITCH_PORT.
+ */
+void SkGeStopPort(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* I/O context */
+int Port, /* port to stop (MAC_1 + n) */
+int Dir, /* Direction to Stop (SK_STOP_RX, SK_STOP_TX, SK_STOP_ALL) */
+int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */
+{
+#ifndef SK_DIAG
+ SK_EVPARA Para;
+#endif /* !SK_DIAG */
+ SK_GEPORT *pPrt;
+ SK_U32 DWord;
+ SK_U32 XsCsr;
+ SK_U32 XaCsr;
+ SK_U64 ToutStart;
+ int i;
+ int ToutCnt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if ((Dir & SK_STOP_TX) != 0) {
+ /* disable receiver and transmitter */
+ SkMacRxTxDisable(pAC, IoC, Port);
+
+ /* stop both transmit queues */
+ /*
+ * If the BMU is in the reset state CSR_STOP will terminate
+ * immediately.
+ */
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_STOP);
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_STOP);
+
+ ToutStart = SkOsGetTime(pAC);
+ ToutCnt = 0;
+ do {
+ /*
+ * Clear packet arbiter timeout to make sure
+ * this loop will terminate.
+ */
+ SK_OUT16(IoC, B3_PA_CTRL, (Port == MAC_1) ? PA_CLR_TO_TX1 :
+ PA_CLR_TO_TX2);
+
+ /*
+ * If the transfer stucks at the MAC the STOP command will not
+ * terminate if we don't flush the XMAC's transmit FIFO !
+ */
+ SkMacFlushTxFifo(pAC, IoC, Port);
+
+ XsCsr = TestStopBit(pAC, IoC, pPrt->PXsQOff);
+ XaCsr = TestStopBit(pAC, IoC, pPrt->PXaQOff);
+
+ if (SkOsGetTime(pAC) - ToutStart > (SK_TICKS_PER_SEC / 18)) {
+ /*
+ * Timeout of 1/18 second reached.
+ * This needs to be checked at 1/18 sec only.
+ */
+ ToutCnt++;
+ if (ToutCnt > 1) {
+ /* Might be a problem when the driver event handler
+ * calls StopPort again. XXX.
+ */
+
+ /* Fatal Error, Loop aborted */
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E018,
+ SKERR_HWI_E018MSG);
+#ifndef SK_DIAG
+ Para.Para64 = Port;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+#endif /* !SK_DIAG */
+ return;
+ }
+ /*
+ * Cache incoherency workaround: Assume a start command
+ * has been lost while sending the frame.
+ */
+ ToutStart = SkOsGetTime(pAC);
+
+ if ((XsCsr & CSR_STOP) != 0) {
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_START);
+ }
+ if ((XaCsr & CSR_STOP) != 0) {
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_START);
+ }
+ }
+
+ /*
+ * Because of the ASIC problem report entry from 21.08.1998 it is
+ * required to wait until CSR_STOP is reset and CSR_SV_IDLE is set.
+ */
+ } while ((XsCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE ||
+ (XaCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
+
+ /* Reset the MAC depending on the RstMode */
+ if (RstMode == SK_SOFT_RST) {
+ SkMacSoftRst(pAC, IoC, Port);
+ }
+ else {
+ SkMacHardRst(pAC, IoC, Port);
+ }
+
+ /* Disable Force Sync bit and Enable Alloc bit */
+ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
+ TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
+
+ /* Stop Interval Timer and Limit Counter of Tx Arbiter */
+ SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), 0L);
+ SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), 0L);
+
+ /* Perform a local reset of the port's Tx path */
+
+ /* Reset the PCI FIFO of the async Tx queue */
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_SET_RESET);
+ /* Reset the PCI FIFO of the sync Tx queue */
+ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_SET_RESET);
+ /* Reset the RAM Buffer async Tx queue */
+ SK_OUT8(IoC, RB_ADDR(pPrt->PXaQOff, RB_CTRL), RB_RST_SET);
+ /* Reset the RAM Buffer sync Tx queue */
+ SK_OUT8(IoC, RB_ADDR(pPrt->PXsQOff, RB_CTRL), RB_RST_SET);
+
+ /* Reset Tx MAC FIFO */
+ if (pAC->GIni.GIGenesis) {
+ /* Note: MFF_RST_SET does NOT reset the XMAC ! */
+ SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_SET);
+
+ /* switch Link and Tx LED off, stop the LED counters */
+ /* Link LED is switched off by the RLMT and the Diag itself */
+ SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_DIS);
+ }
+ else {
+ /* Reset TX MAC FIFO */
+ SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
+ }
+ }
+
+ if ((Dir & SK_STOP_RX) != 0) {
+ /*
+ * The RX Stop Command will not terminate if no buffers
+ * are queued in the RxD ring. But it will always reach
+ * the Idle state. Therefore we can use this feature to
+ * stop the transfer of received packets.
+ */
+ /* stop the port's receive queue */
+ SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_STOP);
+
+ i = 100;
+ do {
+ /*
+ * Clear packet arbiter timeout to make sure
+ * this loop will terminate
+ */
+ SK_OUT16(IoC, B3_PA_CTRL, (Port == MAC_1) ? PA_CLR_TO_RX1 :
+ PA_CLR_TO_RX2);
+
+ DWord = TestStopBit(pAC, IoC, pPrt->PRxQOff);
+
+ /* timeout if i==0 (bug fix for #10748) */
+ if (--i == 0) {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E024,
+ SKERR_HWI_E024MSG);
+ break;
+ }
+ /*
+ * because of the ASIC problem report entry from 21.08.98
+ * it is required to wait until CSR_STOP is reset and
+ * CSR_SV_IDLE is set.
+ */
+ } while ((DWord & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
+
+ /* The path data transfer activity is fully stopped now */
+
+ /* Perform a local reset of the port's Rx path */
+
+ /* Reset the PCI FIFO of the Rx queue */
+ SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_SET_RESET);
+ /* Reset the RAM Buffer receive queue */
+ SK_OUT8(IoC, RB_ADDR(pPrt->PRxQOff, RB_CTRL), RB_RST_SET);
+
+ /* Reset Rx MAC FIFO */
+ if (pAC->GIni.GIGenesis) {
+
+ SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_SET);
+
+ /* switch Rx LED off, stop the LED counter */
+ SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_DIS);
+ }
+ else {
+ /* Reset Rx MAC FIFO */
+ SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
+ }
+ }
+} /* SkGeStopPort */
+
+
+/******************************************************************************
+ *
+ * SkGeInit0() - Level 0 Initialization
+ *
+ * Description:
+ * - Initialize the BMU address offsets
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInit0(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ int i;
+ SK_GEPORT *pPrt;
+
+ for (i = 0; i < SK_MAX_MACS; i++) {
+ pPrt = &pAC->GIni.GP[i];
+
+ pPrt->PState = SK_PRT_RESET;
+ pPrt->PRxQOff = QOffTab[i].RxQOff;
+ pPrt->PXsQOff = QOffTab[i].XsQOff;
+ pPrt->PXaQOff = QOffTab[i].XaQOff;
+ pPrt->PCheckPar = SK_FALSE;
+ pPrt->PIsave = 0;
+ pPrt->PPrevShorts = 0;
+ pPrt->PLinkResCt = 0;
+ pPrt->PAutoNegTOCt = 0;
+ pPrt->PPrevRx = 0;
+ pPrt->PPrevFcs = 0;
+ pPrt->PRxLim = SK_DEF_RX_WA_LIM;
+ pPrt->PLinkMode = SK_LMODE_AUTOFULL;
+ pPrt->PLinkSpeedCap = SK_LSPEED_CAP_1000MBPS;
+ pPrt->PLinkSpeed = SK_LSPEED_1000MBPS;
+ pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_UNKNOWN;
+ pPrt->PLinkModeConf = SK_LMODE_AUTOSENSE;
+ pPrt->PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM;
+ pPrt->PLinkBroken = SK_TRUE; /* See WA code */
+ pPrt->PLinkCap = (SK_LMODE_CAP_HALF | SK_LMODE_CAP_FULL |
+ SK_LMODE_CAP_AUTOHALF | SK_LMODE_CAP_AUTOFULL);
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_UNKNOWN;
+ pPrt->PFlowCtrlCap = SK_FLOW_MODE_SYM_OR_REM;
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
+ pPrt->PMSCap = 0;
+ pPrt->PMSMode = SK_MS_MODE_AUTO;
+ pPrt->PMSStatus = SK_MS_STAT_UNSET;
+ pPrt->PAutoNegFail = SK_FALSE;
+ pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
+ pPrt->PHWLinkUp = SK_FALSE;
+ }
+
+ pAC->GIni.GIPortUsage = SK_RED_LINK;
+
+} /* SkGeInit0*/
+
+#ifdef SK_PCI_RESET
+
+/******************************************************************************
+ *
+ * SkGePciReset() - Reset PCI interface
+ *
+ * Description:
+ * o Read PCI configuration.
+ * o Change power state to 3.
+ * o Change power state to 0.
+ * o Restore PCI configuration.
+ *
+ * Returns:
+ * 0: Success.
+ * 1: Power state could not be changed to 3.
+ */
+static int SkGePciReset(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ int i;
+ SK_U16 PmCtlSts;
+ SK_U32 Bp1;
+ SK_U32 Bp2;
+ SK_U16 PciCmd;
+ SK_U8 Cls;
+ SK_U8 Lat;
+ SK_U8 ConfigSpace[PCI_CFG_SIZE];
+
+ /*
+ * Note: Switching to D3 state is like a software reset.
+ * Switching from D3 to D0 is a hardware reset.
+ * We have to save and restore the configuration space.
+ */
+ for (i = 0; i < PCI_CFG_SIZE; i++) {
+ SkPciReadCfgDWord(pAC, i*4, &ConfigSpace[i]);
+ }
+
+ /* We know the RAM Interface Arbiter is enabled. */
+ SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D3);
+ SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts);
+
+ if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D3) {
+ return(1);
+ }
+
+ /* Return to D0 state. */
+ SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D0);
+
+ /* Check for D0 state. */
+ SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts);
+
+ if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D0) {
+ return(1);
+ }
+
+ /* Check PCI Config Registers. */
+ SkPciReadCfgWord(pAC, PCI_COMMAND, &PciCmd);
+ SkPciReadCfgByte(pAC, PCI_CACHE_LSZ, &Cls);
+ SkPciReadCfgDWord(pAC, PCI_BASE_1ST, &Bp1);
+ SkPciReadCfgDWord(pAC, PCI_BASE_2ND, &Bp2);
+ SkPciReadCfgByte(pAC, PCI_LAT_TIM, &Lat);
+
+ if (PciCmd != 0 || Cls != 0 || (Bp1 & 0xfffffff0L) != 0 || Bp2 != 1 ||
+ Lat != 0) {
+ return(1);
+ }
+
+ /* Restore PCI Config Space. */
+ for (i = 0; i < PCI_CFG_SIZE; i++) {
+ SkPciWriteCfgDWord(pAC, i*4, ConfigSpace[i]);
+ }
+
+ return(0);
+} /* SkGePciReset */
+
+#endif /* SK_PCI_RESET */
+
+/******************************************************************************
+ *
+ * SkGeInit1() - Level 1 Initialization
+ *
+ * Description:
+ * o Do a software reset.
+ * o Clear all reset bits.
+ * o Verify that the detected hardware is present.
+ * Return an error if not.
+ * o Get the hardware configuration
+ * + Read the number of MACs/Ports.
+ * + Read the RAM size.
+ * + Read the PCI Revision Id.
+ * + Find out the adapters host clock speed
+ * + Read and check the PHY type
+ *
+ * Returns:
+ * 0: success
+ * 5: Unexpected PHY type detected
+ * 6: HW self test failed
+ */
+static int SkGeInit1(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ SK_U8 Byte;
+ SK_U16 Word;
+ SK_U16 CtrlStat;
+ SK_U32 FlashAddr;
+ int RetVal;
+ int i;
+
+ RetVal = 0;
+
+ /* save CLK_RUN bits (YUKON-Lite) */
+ SK_IN16(IoC, B0_CTST, &CtrlStat);
+
+#ifdef SK_PCI_RESET
+ (void)SkGePciReset(pAC, IoC);
+#endif /* SK_PCI_RESET */
+
+ /* do the SW-reset */
+ SK_OUT8(IoC, B0_CTST, CS_RST_SET);
+
+ /* release the SW-reset */
+ SK_OUT8(IoC, B0_CTST, CS_RST_CLR);
+
+ /* reset all error bits in the PCI STATUS register */
+ /*
+ * Note: PCI Cfg cycles cannot be used, because they are not
+ * available on some platforms after 'boot time'.
+ */
+ SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
+
+ SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS);
+ SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ /* release Master Reset */
+ SK_OUT8(IoC, B0_CTST, CS_MRST_CLR);
+
+#ifdef CLK_RUN
+ CtrlStat |= CS_CLK_RUN_ENA;
+#endif /* CLK_RUN */
+
+ /* restore CLK_RUN bits */
+ SK_OUT16(IoC, B0_CTST, CtrlStat &
+ (CS_CLK_RUN_HOT | CS_CLK_RUN_RST | CS_CLK_RUN_ENA));
+
+ /* read Chip Identification Number */
+ SK_IN8(IoC, B2_CHIP_ID, &Byte);
+ pAC->GIni.GIChipId = Byte;
+
+ /* read number of MACs */
+ SK_IN8(IoC, B2_MAC_CFG, &Byte);
+ pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2;
+
+ /* get Chip Revision Number */
+ pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4);
+
+ /* get diff. PCI parameters */
+ SK_IN16(IoC, B0_CTST, &CtrlStat);
+
+ /* read the adapters RAM size */
+ SK_IN8(IoC, B2_E_0, &Byte);
+
+ if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+
+ pAC->GIni.GIGenesis = SK_TRUE;
+
+ if (Byte == 3) {
+ /* special case: 4 x 64k x 36, offset = 0x80000 */
+ pAC->GIni.GIRamSize = 1024;
+ pAC->GIni.GIRamOffs = (SK_U32)512 * 1024;
+ }
+ else {
+ pAC->GIni.GIRamSize = (int)Byte * 512;
+ pAC->GIni.GIRamOffs = 0;
+ }
+ /* all GE adapters work with 53.125 MHz host clock */
+ pAC->GIni.GIHstClkFact = SK_FACT_53;
+
+ /* set Descr. Poll Timer Init Value to 250 ms */
+ pAC->GIni.GIPollTimerVal =
+ SK_DPOLL_DEF * (SK_U32)pAC->GIni.GIHstClkFact / 100;
+ }
+ else {
+ pAC->GIni.GIGenesis = SK_FALSE;
+
+#ifndef VCPU
+ pAC->GIni.GIRamSize = (Byte == 0) ? 128 : (int)Byte * 4;
+#else
+ pAC->GIni.GIRamSize = 128;
+#endif
+ pAC->GIni.GIRamOffs = 0;
+
+ /* WA for chip Rev. A */
+ pAC->GIni.GIWolOffs = (pAC->GIni.GIChipRev == 0) ? WOL_REG_OFFS : 0;
+
+ /* get PM Capabilities of PCI config space */
+ SK_IN16(IoC, PCI_C(PCI_PM_CAP_REG), &Word);
+
+ /* check if VAUX is available */
+ if (((CtrlStat & CS_VAUX_AVAIL) != 0) &&
+ /* check also if PME from D3cold is set */
+ ((Word & PCI_PME_D3C_SUP) != 0)) {
+ /* set entry in GE init struct */
+ pAC->GIni.GIVauxAvail = SK_TRUE;
+ }
+
+ /* save Flash-Address Register */
+ SK_IN32(IoC, B2_FAR, &FlashAddr);
+
+ /* test Flash-Address Register */
+ SK_OUT8(IoC, B2_FAR + 3, 0xff);
+ SK_IN8(IoC, B2_FAR + 3, &Byte);
+
+ pAC->GIni.GIYukonLite = (SK_BOOL)(Byte != 0);
+
+ /* restore Flash-Address Register */
+ SK_OUT32(IoC, B2_FAR, FlashAddr);
+
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+ /* set GMAC Link Control reset */
+ SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_SET);
+
+ /* clear GMAC Link Control reset */
+ SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
+ }
+ /* all YU chips work with 78.125 MHz host clock */
+ pAC->GIni.GIHstClkFact = SK_FACT_78;
+
+ pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX; /* 215 ms */
+ }
+
+ /* check if 64-bit PCI Slot is present */
+ pAC->GIni.GIPciSlot64 = (SK_BOOL)((CtrlStat & CS_BUS_SLOT_SZ) != 0);
+
+ /* check if 66 MHz PCI Clock is active */
+ pAC->GIni.GIPciClock66 = (SK_BOOL)((CtrlStat & CS_BUS_CLOCK) != 0);
+
+ /* read PCI HW Revision Id. */
+ SK_IN8(IoC, PCI_C(PCI_REV_ID), &Byte);
+ pAC->GIni.GIPciHwRev = Byte;
+
+ /* read the PMD type */
+ SK_IN8(IoC, B2_PMD_TYP, &Byte);
+ pAC->GIni.GICopperType = (SK_U8)(Byte == 'T');
+
+ /* read the PHY type */
+ SK_IN8(IoC, B2_E_1, &Byte);
+
+ Byte &= 0x0f; /* the PHY type is stored in the lower nibble */
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+
+ if (pAC->GIni.GIGenesis) {
+ switch (Byte) {
+ case SK_PHY_XMAC:
+ pAC->GIni.GP[i].PhyAddr = PHY_ADDR_XMAC;
+ break;
+ case SK_PHY_BCOM:
+ pAC->GIni.GP[i].PhyAddr = PHY_ADDR_BCOM;
+ pAC->GIni.GP[i].PMSCap =
+ SK_MS_CAP_AUTO | SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE;
+ break;
+#ifdef OTHER_PHY
+ case SK_PHY_LONE:
+ pAC->GIni.GP[i].PhyAddr = PHY_ADDR_LONE;
+ break;
+ case SK_PHY_NAT:
+ pAC->GIni.GP[i].PhyAddr = PHY_ADDR_NAT;
+ break;
+#endif /* OTHER_PHY */
+ default:
+ /* ERROR: unexpected PHY type detected */
+ RetVal = 5;
+ break;
+ }
+ }
+ else {
+ if (Byte == 0) {
+ /* if this field is not initialized */
+ Byte = SK_PHY_MARV_COPPER;
+ pAC->GIni.GICopperType = SK_TRUE;
+ }
+ pAC->GIni.GP[i].PhyAddr = PHY_ADDR_MARV;
+
+ if (pAC->GIni.GICopperType) {
+ pAC->GIni.GP[i].PLinkSpeedCap = SK_LSPEED_CAP_AUTO |
+ SK_LSPEED_CAP_10MBPS | SK_LSPEED_CAP_100MBPS |
+ SK_LSPEED_CAP_1000MBPS;
+ pAC->GIni.GP[i].PLinkSpeed = SK_LSPEED_AUTO;
+ pAC->GIni.GP[i].PMSCap =
+ SK_MS_CAP_AUTO | SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE;
+ }
+ else {
+ Byte = SK_PHY_MARV_FIBER;
+ }
+ }
+
+ pAC->GIni.GP[i].PhyType = Byte;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
+ ("PHY type: %d PHY addr: %04x\n", Byte,
+ pAC->GIni.GP[i].PhyAddr));
+ }
+
+ /* get Mac Type & set function pointers dependent on */
+ if (pAC->GIni.GIGenesis) {
+ pAC->GIni.GIMacType = SK_MAC_XMAC;
+
+ pAC->GIni.GIFunc.pFnMacUpdateStats = SkXmUpdateStats;
+ pAC->GIni.GIFunc.pFnMacStatistic = SkXmMacStatistic;
+ pAC->GIni.GIFunc.pFnMacResetCounter = SkXmResetCounter;
+ pAC->GIni.GIFunc.pFnMacOverflow = SkXmOverflowStatus;
+ }
+ else {
+ pAC->GIni.GIMacType = SK_MAC_GMAC;
+
+ pAC->GIni.GIFunc.pFnMacUpdateStats = SkGmUpdateStats;
+ pAC->GIni.GIFunc.pFnMacStatistic = SkGmMacStatistic;
+ pAC->GIni.GIFunc.pFnMacResetCounter = SkGmResetCounter;
+ pAC->GIni.GIFunc.pFnMacOverflow = SkGmOverflowStatus;
+
+#ifdef SPECIAL_HANDLING
+ if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
+ /* check HW self test result */
+ SK_IN8(IoC, B2_E_3, &Byte);
+ if ((Byte & B2_E3_RES_MASK) != 0) {
+ RetVal = 6;
+ }
+ }
+#endif
+ }
+ return(RetVal);
+} /* SkGeInit1 */
+
+
+/******************************************************************************
+ *
+ * SkGeInit2() - Level 2 Initialization
+ *
+ * Description:
+ * - start the Blink Source Counter
+ * - start the Descriptor Poll Timer
+ * - configure the MAC-Arbiter
+ * - configure the Packet-Arbiter
+ * - enable the Tx Arbiters
+ * - enable the RAM Interface Arbiter
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGeInit2(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ SK_U32 DWord;
+ int i;
+
+ /* start the Descriptor Poll Timer */
+ if (pAC->GIni.GIPollTimerVal != 0) {
+ if (pAC->GIni.GIPollTimerVal > SK_DPOLL_MAX) {
+ pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX;
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E017, SKERR_HWI_E017MSG);
+ }
+ SK_OUT32(IoC, B28_DPT_INI, pAC->GIni.GIPollTimerVal);
+ SK_OUT8(IoC, B28_DPT_CTRL, DPT_START);
+ }
+
+ if (pAC->GIni.GIGenesis) {
+ /* start the Blink Source Counter */
+ DWord = SK_BLK_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
+
+ SK_OUT32(IoC, B2_BSC_INI, DWord);
+ SK_OUT8(IoC, B2_BSC_CTRL, BSC_START);
+
+ /*
+ * Configure the MAC Arbiter and the Packet Arbiter.
+ * They will be started once and never be stopped.
+ */
+ SkGeInitMacArb(pAC, IoC);
+
+ SkGeInitPktArb(pAC, IoC);
+ }
+ else {
+ /* start Time Stamp Timer */
+ SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_START);
+ }
+
+ /* enable the Tx Arbiters */
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+ SK_OUT8(IoC, MR_ADDR(i, TXA_CTRL), TXA_ENA_ARB);
+ }
+
+ /* enable the RAM Interface Arbiter */
+ SkGeInitRamIface(pAC, IoC);
+
+} /* SkGeInit2 */
+
+/******************************************************************************
+ *
+ * SkGeInit() - Initialize the GE Adapter with the specified level.
+ *
+ * Description:
+ * Level 0: Initialize the Module structures.
+ * Level 1: Generic Hardware Initialization. The IOP/MemBase pointer has
+ * to be set before calling this level.
+ *
+ * o Do a software reset.
+ * o Clear all reset bits.
+ * o Verify that the detected hardware is present.
+ * Return an error if not.
+ * o Get the hardware configuration
+ * + Set GIMacsFound with the number of MACs.
+ * + Store the RAM size in GIRamSize.
+ * + Save the PCI Revision ID in GIPciHwRev.
+ * o return an error
+ * if Number of MACs > SK_MAX_MACS
+ *
+ * After returning from Level 0 the adapter
+ * may be accessed with IO operations.
+ *
+ * Level 2: start the Blink Source Counter
+ *
+ * Returns:
+ * 0: success
+ * 1: Number of MACs exceeds SK_MAX_MACS (after level 1)
+ * 2: Adapter not present or not accessible
+ * 3: Illegal initialization level
+ * 4: Initialization Level 1 Call missing
+ * 5: Unexpected PHY type detected
+ * 6: HW self test failed
+ */
+int SkGeInit(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Level) /* initialization level */
+{
+ int RetVal; /* return value */
+ SK_U32 DWord;
+
+ RetVal = 0;
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
+ ("SkGeInit(Level %d)\n", Level));
+
+ switch (Level) {
+ case SK_INIT_DATA:
+ /* Initialization Level 0 */
+ SkGeInit0(pAC, IoC);
+ pAC->GIni.GILevel = SK_INIT_DATA;
+ break;
+
+ case SK_INIT_IO:
+ /* Initialization Level 1 */
+ RetVal = SkGeInit1(pAC, IoC);
+ if (RetVal != 0) {
+ break;
+ }
+
+ /* check if the adapter seems to be accessible */
+ SK_OUT32(IoC, B2_IRQM_INI, 0x11335577L);
+ SK_IN32(IoC, B2_IRQM_INI, &DWord);
+ SK_OUT32(IoC, B2_IRQM_INI, 0L);
+
+ if (DWord != 0x11335577L) {
+ RetVal = 2;
+ break;
+ }
+
+ /* check if the number of GIMacsFound matches SK_MAX_MACS */
+ if (pAC->GIni.GIMacsFound > SK_MAX_MACS) {
+ RetVal = 1;
+ break;
+ }
+
+ /* Level 1 successfully passed */
+ pAC->GIni.GILevel = SK_INIT_IO;
+ break;
+
+ case SK_INIT_RUN:
+ /* Initialization Level 2 */
+ if (pAC->GIni.GILevel != SK_INIT_IO) {
+#ifndef SK_DIAG
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E002, SKERR_HWI_E002MSG);
+#endif /* !SK_DIAG */
+ RetVal = 4;
+ break;
+ }
+ SkGeInit2(pAC, IoC);
+
+ /* Level 2 successfully passed */
+ pAC->GIni.GILevel = SK_INIT_RUN;
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E003, SKERR_HWI_E003MSG);
+ RetVal = 3;
+ break;
+ }
+
+ return(RetVal);
+} /* SkGeInit */
+
+
+/******************************************************************************
+ *
+ * SkGeDeInit() - Deinitialize the adapter
+ *
+ * Description:
+ * All ports of the adapter will be stopped if not already done.
+ * Do a software reset and switch off all LEDs.
+ *
+ * Returns:
+ * nothing
+ */
+void SkGeDeInit(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC) /* IO context */
+{
+ int i;
+ SK_U16 Word;
+
+#ifndef VCPU
+ /* ensure I2C is ready */
+ SkI2cWaitIrq(pAC, IoC);
+#endif
+
+ /* stop all current transfer activity */
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+ if (pAC->GIni.GP[i].PState != SK_PRT_STOP &&
+ pAC->GIni.GP[i].PState != SK_PRT_RESET) {
+
+ SkGeStopPort(pAC, IoC, i, SK_STOP_ALL, SK_HARD_RST);
+ }
+ }
+
+ /* Reset all bits in the PCI STATUS register */
+ /*
+ * Note: PCI Cfg cycles cannot be used, because they are not
+ * available on some platforms after 'boot time'.
+ */
+ SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
+
+ SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS);
+ SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ /* do the reset, all LEDs are switched off now */
+ SK_OUT8(IoC, B0_CTST, CS_RST_SET);
+} /* SkGeDeInit */
+
+
+/******************************************************************************
+ *
+ * SkGeInitPort() Initialize the specified port.
+ *
+ * Description:
+ * PRxQSize, PXSQSize, and PXAQSize has to be
+ * configured for the specified port before calling this function.
+ * The descriptor rings has to be initialized too.
+ *
+ * o (Re)configure queues of the specified port.
+ * o configure the MAC of the specified port.
+ * o put ASIC and MAC(s) in operational mode.
+ * o initialize Rx/Tx and Sync LED
+ * o initialize RAM Buffers and MAC FIFOs
+ *
+ * The port is ready to connect when returning.
+ *
+ * Note:
+ * The MAC's Rx and Tx state machine is still disabled when returning.
+ *
+ * Returns:
+ * 0: success
+ * 1: Queue size initialization error. The configured values
+ * for PRxQSize, PXSQSize, or PXAQSize are invalid for one
+ * or more queues. The specified port was NOT initialized.
+ * An error log entry was generated.
+ * 2: The port has to be stopped before it can be initialized again.
+ */
+int SkGeInitPort(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port to configure */
+{
+ SK_GEPORT *pPrt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (SkGeCheckQSize(pAC, Port) != 0) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E004, SKERR_HWI_E004MSG);
+ return(1);
+ }
+
+ if (pPrt->PState == SK_PRT_INIT || pPrt->PState == SK_PRT_RUN) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E005, SKERR_HWI_E005MSG);
+ return(2);
+ }
+
+ /* configuration ok, initialize the Port now */
+
+ if (pAC->GIni.GIGenesis) {
+ /* initialize Rx, Tx and Link LED */
+ /*
+ * If 1000BT Phy needs LED initialization than swap
+ * LED and XMAC initialization order
+ */
+ SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
+ SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_ENA);
+ /* The Link LED is initialized by RLMT or Diagnostics itself */
+
+ SkXmInitMac(pAC, IoC, Port);
+ }
+ else {
+
+ SkGmInitMac(pAC, IoC, Port);
+ }
+
+ /* do NOT initialize the Link Sync Counter */
+
+ SkGeInitMacFifo(pAC, IoC, Port);
+
+ SkGeInitRamBufs(pAC, IoC, Port);
+
+ if (pPrt->PXSQSize != 0) {
+ /* enable Force Sync bit if synchronous queue available */
+ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_ENA_FSYNC);
+ }
+
+ SkGeInitBmu(pAC, IoC, Port);
+
+ /* mark port as initialized */
+ pPrt->PState = SK_PRT_INIT;
+
+ return(0);
+} /* SkGeInitPort */
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/sk98lin/skgemib.c b/drivers/net/sk98lin/skgemib.c
new file mode 100644
index 0000000..4a9e9e6
--- /dev/null
+++ b/drivers/net/sk98lin/skgemib.c
@@ -0,0 +1,1060 @@
+/*****************************************************************************
+ *
+ * Name: skgemib.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.7 $
+ * Date: $Date: 2002/12/16 09:04:34 $
+ * Purpose: Private Network Management Interface Management Database
+ *
+ ****************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 2002 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgemib.c,v $
+ * Revision 1.7 2002/12/16 09:04:34 tschilli
+ * Code for VCT handling added.
+ *
+ * Revision 1.6 2002/08/09 15:40:21 rwahl
+ * Editorial change (renamed ConfSpeedCap).
+ *
+ * Revision 1.5 2002/08/09 11:05:34 rwahl
+ * Added oid handling for link speed cap.
+ *
+ * Revision 1.4 2002/08/09 09:40:27 rwahl
+ * Added support for NDIS OID_PNP_xxx.
+ *
+ * Revision 1.3 2002/07/17 19:39:54 rwahl
+ * Added handler for OID_SKGE_SPEED_MODE & OID_SKGE_SPEED_STATUS.
+ *
+ * Revision 1.2 2002/05/22 08:59:00 rwahl
+ * - static functions only for release build.
+ * - Source file must be included.
+ *
+ * Revision 1.1 2002/05/22 08:12:42 rwahl
+ * Initial version.
+ *
+ ****************************************************************************/
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+/*
+ * PRIVATE OID handler function prototypes
+ */
+PNMI_STATIC int Addr(SK_AC *pAC, SK_IOC IoC, int action,
+ SK_U32 Id, char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int CsumStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int General(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int Mac8023Stat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int MacPrivateConf(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int MacPrivateStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int Monitor(SK_AC *pAC, SK_IOC IoC, int action,
+ SK_U32 Id, char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int OidStruct(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int Perform(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int* pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int Rlmt(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int RlmtStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int SensorStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int Vpd(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+
+#ifdef SK_POWER_MGMT
+PNMI_STATIC int PowerManagement(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance,
+ unsigned int TableIndex, SK_U32 NetIndex);
+#endif
+
+
+/* defines *******************************************************************/
+#define ID_TABLE_SIZE (sizeof(IdTable)/sizeof(IdTable[0]))
+
+
+/* global variables **********************************************************/
+
+/*
+ * Table to correlate OID with handler function and index to
+ * hardware register stored in StatAddress if applicable.
+ */
+PNMI_STATIC const SK_PNMI_TAB_ENTRY IdTable[] = {
+ {OID_GEN_XMIT_OK,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX},
+ {OID_GEN_RCV_OK,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX},
+ {OID_GEN_XMIT_ERROR,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, General, 0},
+ {OID_GEN_RCV_ERROR,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, General, 0},
+ {OID_GEN_RCV_NO_BUFFER,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, General, 0},
+ {OID_GEN_DIRECTED_FRAMES_XMIT,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_UNICAST},
+ {OID_GEN_MULTICAST_FRAMES_XMIT,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_MULTICAST},
+ {OID_GEN_BROADCAST_FRAMES_XMIT,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_BROADCAST},
+ {OID_GEN_DIRECTED_FRAMES_RCV,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_UNICAST},
+ {OID_GEN_MULTICAST_FRAMES_RCV,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_MULTICAST},
+ {OID_GEN_BROADCAST_FRAMES_RCV,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_BROADCAST},
+ {OID_GEN_RCV_CRC_ERROR,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_FCS},
+ {OID_GEN_TRANSMIT_QUEUE_LENGTH,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, General, 0},
+ {OID_802_3_PERMANENT_ADDRESS,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, 0},
+ {OID_802_3_CURRENT_ADDRESS,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, 0},
+ {OID_802_3_RCV_ERROR_ALIGNMENT,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_FRAMING},
+ {OID_802_3_XMIT_ONE_COLLISION,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_SINGLE_COL},
+ {OID_802_3_XMIT_MORE_COLLISIONS,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_MULTI_COL},
+ {OID_802_3_XMIT_DEFERRED,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_DEFFERAL},
+ {OID_802_3_XMIT_MAX_COLLISIONS,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_EXCESS_COL},
+ {OID_802_3_RCV_OVERRUN,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_OVERFLOW},
+ {OID_802_3_XMIT_UNDERRUN,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_UNDERRUN},
+ {OID_802_3_XMIT_TIMES_CRS_LOST,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_CARRIER},
+ {OID_802_3_XMIT_LATE_COLLISIONS,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_LATE_COL},
+#ifdef SK_POWER_MGMT
+ {OID_PNP_CAPABILITIES,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, PowerManagement, 0},
+ {OID_PNP_SET_POWER,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_WO, PowerManagement, 0},
+ {OID_PNP_QUERY_POWER,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, PowerManagement, 0},
+ {OID_PNP_ADD_WAKE_UP_PATTERN,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_WO, PowerManagement, 0},
+ {OID_PNP_REMOVE_WAKE_UP_PATTERN,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_WO, PowerManagement, 0},
+ {OID_PNP_ENABLE_WAKE_UP,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RW, PowerManagement, 0},
+#endif /* SK_POWER_MGMT */
+ {OID_SKGE_MDB_VERSION,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(MgmtDBVersion),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_SUPPORTED_LIST,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_ALL_DATA,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RW, OidStruct, 0},
+ {OID_SKGE_VPD_FREE_BYTES,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(VpdFreeBytes),
+ SK_PNMI_RO, Vpd, 0},
+ {OID_SKGE_VPD_ENTRIES_LIST,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(VpdEntriesList),
+ SK_PNMI_RO, Vpd, 0},
+ {OID_SKGE_VPD_ENTRIES_NUMBER,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(VpdEntriesNumber),
+ SK_PNMI_RO, Vpd, 0},
+ {OID_SKGE_VPD_KEY,
+ SK_PNMI_VPD_ENTRIES,
+ sizeof(SK_PNMI_VPD),
+ SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdKey),
+ SK_PNMI_RO, Vpd, 0},
+ {OID_SKGE_VPD_VALUE,
+ SK_PNMI_VPD_ENTRIES,
+ sizeof(SK_PNMI_VPD),
+ SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdValue),
+ SK_PNMI_RO, Vpd, 0},
+ {OID_SKGE_VPD_ACCESS,
+ SK_PNMI_VPD_ENTRIES,
+ sizeof(SK_PNMI_VPD),
+ SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAccess),
+ SK_PNMI_RO, Vpd, 0},
+ {OID_SKGE_VPD_ACTION,
+ SK_PNMI_VPD_ENTRIES,
+ sizeof(SK_PNMI_VPD),
+ SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAction),
+ SK_PNMI_RW, Vpd, 0},
+ {OID_SKGE_PORT_NUMBER,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(PortNumber),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_DEVICE_TYPE,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(DeviceType),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_DRIVER_DESCR,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(DriverDescr),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_DRIVER_VERSION,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(DriverVersion),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_HW_DESCR,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(HwDescr),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_HW_VERSION,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(HwVersion),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_CHIPSET,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(Chipset),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_ACTION,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(Action),
+ SK_PNMI_RW, Perform, 0},
+ {OID_SKGE_RESULT,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(TestResult),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_BUS_TYPE,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(BusType),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_BUS_SPEED,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(BusSpeed),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_BUS_WIDTH,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(BusWidth),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_TX_SW_QUEUE_LEN,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(TxSwQueueLen),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_TX_SW_QUEUE_MAX,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(TxSwQueueMax),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_TX_RETRY,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(TxRetryCts),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_RX_INTR_CTS,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RxIntrCts),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_TX_INTR_CTS,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(TxIntrCts),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_RX_NO_BUF_CTS,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RxNoBufCts),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_TX_NO_BUF_CTS,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(TxNoBufCts),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_TX_USED_DESCR_NO,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(TxUsedDescrNo),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_RX_DELIVERED_CTS,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RxDeliveredCts),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_RX_OCTETS_DELIV_CTS,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RxOctetsDeliveredCts),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_RX_HW_ERROR_CTS,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RxHwErrorsCts),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_TX_HW_ERROR_CTS,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(TxHwErrorsCts),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_IN_ERRORS_CTS,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(InErrorsCts),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_OUT_ERROR_CTS,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(OutErrorsCts),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_ERR_RECOVERY_CTS,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(ErrRecoveryCts),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_SYSUPTIME,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(SysUpTime),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_SENSOR_NUMBER,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(SensorNumber),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_SENSOR_INDEX,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorIndex),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_SENSOR_DESCR,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorDescr),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_SENSOR_TYPE,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorType),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_SENSOR_VALUE,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorValue),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_SENSOR_WAR_THRES_LOW,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningThresholdLow),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_SENSOR_WAR_THRES_UPP,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningThresholdHigh),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_SENSOR_ERR_THRES_LOW,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorThresholdLow),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_SENSOR_ERR_THRES_UPP,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorThresholdHigh),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_SENSOR_STATUS,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorStatus),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_SENSOR_WAR_CTS,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningCts),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_SENSOR_ERR_CTS,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorCts),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_SENSOR_WAR_TIME,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningTimestamp),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_SENSOR_ERR_TIME,
+ SK_PNMI_SENSOR_ENTRIES,
+ sizeof(SK_PNMI_SENSOR),
+ SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorTimestamp),
+ SK_PNMI_RO, SensorStat, 0},
+ {OID_SKGE_CHKSM_NUMBER,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(ChecksumNumber),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_CHKSM_RX_OK_CTS,
+ SKCS_NUM_PROTOCOLS,
+ sizeof(SK_PNMI_CHECKSUM),
+ SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxOkCts),
+ SK_PNMI_RO, CsumStat, 0},
+ {OID_SKGE_CHKSM_RX_UNABLE_CTS,
+ SKCS_NUM_PROTOCOLS,
+ sizeof(SK_PNMI_CHECKSUM),
+ SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxUnableCts),
+ SK_PNMI_RO, CsumStat, 0},
+ {OID_SKGE_CHKSM_RX_ERR_CTS,
+ SKCS_NUM_PROTOCOLS,
+ sizeof(SK_PNMI_CHECKSUM),
+ SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxErrCts),
+ SK_PNMI_RO, CsumStat, 0},
+ {OID_SKGE_CHKSM_TX_OK_CTS,
+ SKCS_NUM_PROTOCOLS,
+ sizeof(SK_PNMI_CHECKSUM),
+ SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumTxOkCts),
+ SK_PNMI_RO, CsumStat, 0},
+ {OID_SKGE_CHKSM_TX_UNABLE_CTS,
+ SKCS_NUM_PROTOCOLS,
+ sizeof(SK_PNMI_CHECKSUM),
+ SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumTxUnableCts),
+ SK_PNMI_RO, CsumStat, 0},
+ {OID_SKGE_STAT_TX,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxOkCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX},
+ {OID_SKGE_STAT_TX_OCTETS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxOctetsOkCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_OCTET},
+ {OID_SKGE_STAT_TX_BROADCAST,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxBroadcastOkCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_BROADCAST},
+ {OID_SKGE_STAT_TX_MULTICAST,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMulticastOkCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MULTICAST},
+ {OID_SKGE_STAT_TX_UNICAST,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxUnicastOkCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_UNICAST},
+ {OID_SKGE_STAT_TX_LONGFRAMES,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxLongFramesCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_LONGFRAMES},
+ {OID_SKGE_STAT_TX_BURST,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxBurstCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_BURST},
+ {OID_SKGE_STAT_TX_PFLOWC,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxPauseMacCtrlCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_PMACC},
+ {OID_SKGE_STAT_TX_FLOWC,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMacCtrlCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MACC},
+ {OID_SKGE_STAT_TX_SINGLE_COL,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSingleCollisionCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SINGLE_COL},
+ {OID_SKGE_STAT_TX_MULTI_COL,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMultipleCollisionCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MULTI_COL},
+ {OID_SKGE_STAT_TX_EXCESS_COL,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxExcessiveCollisionCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_EXCESS_COL},
+ {OID_SKGE_STAT_TX_LATE_COL,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxLateCollisionCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_LATE_COL},
+ {OID_SKGE_STAT_TX_DEFFERAL,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxDeferralCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_DEFFERAL},
+ {OID_SKGE_STAT_TX_EXCESS_DEF,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxExcessiveDeferralCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_EXCESS_DEF},
+ {OID_SKGE_STAT_TX_UNDERRUN,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxFifoUnderrunCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_UNDERRUN},
+ {OID_SKGE_STAT_TX_CARRIER,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxCarrierCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_CARRIER},
+/* {OID_SKGE_STAT_TX_UTIL,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxUtilization),
+ SK_PNMI_RO, MacPrivateStat, (SK_U16)(-1)}, */
+ {OID_SKGE_STAT_TX_64,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx64Cts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_64},
+ {OID_SKGE_STAT_TX_127,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx127Cts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_127},
+ {OID_SKGE_STAT_TX_255,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx255Cts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_255},
+ {OID_SKGE_STAT_TX_511,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx511Cts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_511},
+ {OID_SKGE_STAT_TX_1023,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx1023Cts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_1023},
+ {OID_SKGE_STAT_TX_MAX,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMaxCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MAX},
+ {OID_SKGE_STAT_TX_SYNC,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSyncCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SYNC},
+ {OID_SKGE_STAT_TX_SYNC_OCTETS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSyncOctetsCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SYNC_OCTET},
+ {OID_SKGE_STAT_RX,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxOkCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX},
+ {OID_SKGE_STAT_RX_OCTETS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxOctetsOkCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_OCTET},
+ {OID_SKGE_STAT_RX_BROADCAST,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxBroadcastOkCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_BROADCAST},
+ {OID_SKGE_STAT_RX_MULTICAST,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMulticastOkCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MULTICAST},
+ {OID_SKGE_STAT_RX_UNICAST,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxUnicastOkCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_UNICAST},
+ {OID_SKGE_STAT_RX_LONGFRAMES,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxLongFramesCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_LONGFRAMES},
+ {OID_SKGE_STAT_RX_PFLOWC,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxPauseMacCtrlCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_PMACC},
+ {OID_SKGE_STAT_RX_FLOWC,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMacCtrlCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MACC},
+ {OID_SKGE_STAT_RX_PFLOWC_ERR,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxPauseMacCtrlErrorCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_PMACC_ERR},
+ {OID_SKGE_STAT_RX_FLOWC_UNKWN,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMacCtrlUnknownCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MACC_UNKWN},
+ {OID_SKGE_STAT_RX_BURST,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxBurstCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_BURST},
+ {OID_SKGE_STAT_RX_MISSED,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMissedCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MISSED},
+ {OID_SKGE_STAT_RX_FRAMING,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFramingCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_FRAMING},
+ {OID_SKGE_STAT_RX_OVERFLOW,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFifoOverflowCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_OVERFLOW},
+ {OID_SKGE_STAT_RX_JABBER,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxJabberCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_JABBER},
+ {OID_SKGE_STAT_RX_CARRIER,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxCarrierCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_CARRIER},
+ {OID_SKGE_STAT_RX_IR_LENGTH,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxIRLengthCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_IRLENGTH},
+ {OID_SKGE_STAT_RX_SYMBOL,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxSymbolCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_SYMBOL},
+ {OID_SKGE_STAT_RX_SHORTS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxShortsCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_SHORTS},
+ {OID_SKGE_STAT_RX_RUNT,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxRuntCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_RUNT},
+ {OID_SKGE_STAT_RX_CEXT,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxCextCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_CEXT},
+ {OID_SKGE_STAT_RX_TOO_LONG,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxTooLongCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_TOO_LONG},
+ {OID_SKGE_STAT_RX_FCS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFcsCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_FCS},
+/* {OID_SKGE_STAT_RX_UTIL,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxUtilization),
+ SK_PNMI_RO, MacPrivateStat, (SK_U16)(-1)}, */
+ {OID_SKGE_STAT_RX_64,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx64Cts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_64},
+ {OID_SKGE_STAT_RX_127,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx127Cts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_127},
+ {OID_SKGE_STAT_RX_255,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx255Cts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_255},
+ {OID_SKGE_STAT_RX_511,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx511Cts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_511},
+ {OID_SKGE_STAT_RX_1023,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx1023Cts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_1023},
+ {OID_SKGE_STAT_RX_MAX,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_STAT),
+ SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMaxCts),
+ SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MAX},
+ {OID_SKGE_PHYS_CUR_ADDR,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfMacCurrentAddr),
+ SK_PNMI_RW, Addr, 0},
+ {OID_SKGE_PHYS_FAC_ADDR,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfMacFactoryAddr),
+ SK_PNMI_RO, Addr, 0},
+ {OID_SKGE_PMD,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPMD),
+ SK_PNMI_RO, MacPrivateConf, 0},
+ {OID_SKGE_CONNECTOR,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfConnector),
+ SK_PNMI_RO, MacPrivateConf, 0},
+ {OID_SKGE_LINK_CAP,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkCapability),
+ SK_PNMI_RO, MacPrivateConf, 0},
+ {OID_SKGE_LINK_MODE,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkMode),
+ SK_PNMI_RW, MacPrivateConf, 0},
+ {OID_SKGE_LINK_MODE_STATUS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkModeStatus),
+ SK_PNMI_RO, MacPrivateConf, 0},
+ {OID_SKGE_LINK_STATUS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkStatus),
+ SK_PNMI_RO, MacPrivateConf, 0},
+ {OID_SKGE_FLOWCTRL_CAP,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlCapability),
+ SK_PNMI_RO, MacPrivateConf, 0},
+ {OID_SKGE_FLOWCTRL_MODE,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlMode),
+ SK_PNMI_RW, MacPrivateConf, 0},
+ {OID_SKGE_FLOWCTRL_STATUS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlStatus),
+ SK_PNMI_RO, MacPrivateConf, 0},
+ {OID_SKGE_PHY_OPERATION_CAP,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationCapability),
+ SK_PNMI_RO, MacPrivateConf, 0},
+ {OID_SKGE_PHY_OPERATION_MODE,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationMode),
+ SK_PNMI_RW, MacPrivateConf, 0},
+ {OID_SKGE_PHY_OPERATION_STATUS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationStatus),
+ SK_PNMI_RO, MacPrivateConf, 0},
+ {OID_SKGE_SPEED_CAP,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedCapability),
+ SK_PNMI_RO, MacPrivateConf, 0},
+ {OID_SKGE_SPEED_MODE,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedMode),
+ SK_PNMI_RW, MacPrivateConf, 0},
+ {OID_SKGE_SPEED_STATUS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_CONF),
+ SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedStatus),
+ SK_PNMI_RO, MacPrivateConf, 0},
+ {OID_SKGE_TRAP,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(Trap),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_TRAP_NUMBER,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(TrapNumber),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_RLMT_MODE,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RlmtMode),
+ SK_PNMI_RW, Rlmt, 0},
+ {OID_SKGE_RLMT_PORT_NUMBER,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RlmtPortNumber),
+ SK_PNMI_RO, Rlmt, 0},
+ {OID_SKGE_RLMT_PORT_ACTIVE,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RlmtPortActive),
+ SK_PNMI_RO, Rlmt, 0},
+ {OID_SKGE_RLMT_PORT_PREFERRED,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RlmtPortPreferred),
+ SK_PNMI_RW, Rlmt, 0},
+ {OID_SKGE_RLMT_CHANGE_CTS,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RlmtChangeCts),
+ SK_PNMI_RO, Rlmt, 0},
+ {OID_SKGE_RLMT_CHANGE_TIME,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RlmtChangeTime),
+ SK_PNMI_RO, Rlmt, 0},
+ {OID_SKGE_RLMT_CHANGE_ESTIM,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RlmtChangeEstimate),
+ SK_PNMI_RO, Rlmt, 0},
+ {OID_SKGE_RLMT_CHANGE_THRES,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RlmtChangeThreshold),
+ SK_PNMI_RW, Rlmt, 0},
+ {OID_SKGE_RLMT_PORT_INDEX,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_RLMT),
+ SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtIndex),
+ SK_PNMI_RO, RlmtStat, 0},
+ {OID_SKGE_RLMT_STATUS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_RLMT),
+ SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtStatus),
+ SK_PNMI_RO, RlmtStat, 0},
+ {OID_SKGE_RLMT_TX_HELLO_CTS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_RLMT),
+ SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtTxHelloCts),
+ SK_PNMI_RO, RlmtStat, 0},
+ {OID_SKGE_RLMT_RX_HELLO_CTS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_RLMT),
+ SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtRxHelloCts),
+ SK_PNMI_RO, RlmtStat, 0},
+ {OID_SKGE_RLMT_TX_SP_REQ_CTS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_RLMT),
+ SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtTxSpHelloReqCts),
+ SK_PNMI_RO, RlmtStat, 0},
+ {OID_SKGE_RLMT_RX_SP_CTS,
+ SK_PNMI_MAC_ENTRIES,
+ sizeof(SK_PNMI_RLMT),
+ SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtRxSpHelloCts),
+ SK_PNMI_RO, RlmtStat, 0},
+ {OID_SKGE_RLMT_MONITOR_NUMBER,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(RlmtMonitorNumber),
+ SK_PNMI_RO, General, 0},
+ {OID_SKGE_RLMT_MONITOR_INDEX,
+ SK_PNMI_MONITOR_ENTRIES,
+ sizeof(SK_PNMI_RLMT_MONITOR),
+ SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorIndex),
+ SK_PNMI_RO, Monitor, 0},
+ {OID_SKGE_RLMT_MONITOR_ADDR,
+ SK_PNMI_MONITOR_ENTRIES,
+ sizeof(SK_PNMI_RLMT_MONITOR),
+ SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorAddr),
+ SK_PNMI_RO, Monitor, 0},
+ {OID_SKGE_RLMT_MONITOR_ERRS,
+ SK_PNMI_MONITOR_ENTRIES,
+ sizeof(SK_PNMI_RLMT_MONITOR),
+ SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorErrorCts),
+ SK_PNMI_RO, Monitor, 0},
+ {OID_SKGE_RLMT_MONITOR_TIMESTAMP,
+ SK_PNMI_MONITOR_ENTRIES,
+ sizeof(SK_PNMI_RLMT_MONITOR),
+ SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorTimestamp),
+ SK_PNMI_RO, Monitor, 0},
+ {OID_SKGE_RLMT_MONITOR_ADMIN,
+ SK_PNMI_MONITOR_ENTRIES,
+ sizeof(SK_PNMI_RLMT_MONITOR),
+ SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorAdmin),
+ SK_PNMI_RW, Monitor, 0},
+ {OID_SKGE_MTU,
+ 1,
+ 0,
+ SK_PNMI_MAI_OFF(MtuSize),
+ SK_PNMI_RW, MacPrivateConf, 0},
+ {OID_SKGE_VCT_GET,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Vct, 0},
+ {OID_SKGE_VCT_SET,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_WO, Vct, 0},
+ {OID_SKGE_VCT_STATUS,
+ 0,
+ 0,
+ 0,
+ SK_PNMI_RO, Vct, 0},
+};
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c
new file mode 100644
index 0000000..b5d32b0
--- /dev/null
+++ b/drivers/net/sk98lin/skgepnmi.c
@@ -0,0 +1,8310 @@
+/*****************************************************************************
+ *
+ * Name: skgepnmi.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.102 $
+ * Date: $Date: 2002/12/16 14:03:24 $
+ * Purpose: Private Network Management Interface
+ *
+ ****************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgepnmi.c,v $
+ * Revision 1.102 2002/12/16 14:03:24 tschilli
+ * VCT code in Vct() changed.
+ *
+ * Revision 1.101 2002/12/16 09:04:10 tschilli
+ * Code for VCT handling added.
+ *
+ * Revision 1.100 2002/09/26 14:28:13 tschilli
+ * For XMAC the values in the SK_PNMI_PORT Port struct are copied to
+ * the new SK_PNMI_PORT BufPort struct during a MacUpdate() call.
+ * These values are used when GetPhysStatVal() is called. With this
+ * mechanism you get the best results when software corrections for
+ * counters are needed. Example: RX_LONGFRAMES.
+ *
+ * Revision 1.99 2002/09/17 12:31:19 tschilli
+ * OID_SKGE_TX_HW_ERROR_CTS, OID_SKGE_OUT_ERROR_CTS, OID_GEN_XMIT_ERROR:
+ * Double count of SK_PNMI_HTX_EXCESS_COL in function General() removed.
+ * OID_PNP_CAPABILITIES: sizeof(SK_PM_WAKE_UP_CAPABILITIES) changed to
+ * sizeof(SK_PNP_CAPABILITIES) in function PowerManagement().
+ *
+ * Revision 1.98 2002/09/10 09:00:03 rwahl
+ * Adapted boolean definitions according sktypes.
+ *
+ * Revision 1.97 2002/09/05 15:07:03 rwahl
+ * Editorial changes.
+ *
+ * Revision 1.96 2002/09/05 11:04:14 rwahl
+ * - Rx/Tx packets statistics of virtual port were zero on link down (#10750)
+ * - For GMAC the overflow IRQ for Rx longframe counter was not counted.
+ * - Incorrect calculation for oids OID_SKGE_RX_HW_ERROR_CTS,
+ * OID_SKGE_IN_ERRORS_CTS, OID_GEN_RCV_ERROR.
+ * - Moved correction for OID_SKGE_STAT_RX_TOO_LONG to GetPhysStatVal().
+ * - Editorial changes.
+ *
+ * Revision 1.95 2002/09/04 08:53:37 rwahl
+ * - Incorrect statistics for Rx_too_long counter with jumbo frame (#10751)
+ * - StatRxFrameTooLong & StatRxPMaccErr counters were not reset.
+ * - Fixed compiler warning for debug msg arg types.
+ *
+ * Revision 1.94 2002/08/09 15:42:14 rwahl
+ * - Fixed StatAddr table for GMAC.
+ * - VirtualConf(): returned indeterminated status for speed oids if no
+ * active port.
+ *
+ * Revision 1.93 2002/08/09 11:04:59 rwahl
+ * Added handler for link speed caps.
+ *
+ * Revision 1.92 2002/08/09 09:43:03 rwahl
+ * - Added handler for NDIS OID_PNP_xxx ids.
+ *
+ * Revision 1.91 2002/07/17 19:53:03 rwahl
+ * - Added StatOvrflwBit table for XMAC & GMAC.
+ * - Extended StatAddr table for GMAC. Added check of number of counters
+ * in enumeration and size of StatAddr table on init level.
+ * - Added use of GIFunc table.
+ * - ChipSet is not static anymore,
+ * - Extended SIRQ event handler for both mac types.
+ * - Fixed rx short counter bug (#10620)
+ * - Added handler for oids SKGE_SPEED_MODE & SKGE_SPEED_STATUS.
+ * - Extendet GetPhysStatVal() for GMAC.
+ * - Editorial changes.
+ *
+ * Revision 1.90 2002/05/22 08:56:25 rwahl
+ * - Moved OID table to separate source file.
+ * - Fix: TX_DEFFERAL counter incremented in full-duplex mode.
+ * - Use string definitions for error msgs.
+ *
+ * Revision 1.89 2001/09/18 10:01:30 mkunz
+ * some OID's fixed for dualnetmode
+ *
+ * Revision 1.88 2001/08/02 07:58:08 rwahl
+ * - Fixed NetIndex to csum module at ResetCounter().
+ *
+ * Revision 1.87 2001/04/06 13:35:09 mkunz
+ * -Bugs fixed in handling of OID_SKGE_MTU and the VPD OID's
+ *
+ * Revision 1.86 2001/03/09 09:18:03 mkunz
+ * Changes in SK_DBG_MSG
+ *
+ * Revision 1.85 2001/03/08 09:37:31 mkunz
+ * Bugfix in ResetCounter for Pnmi.Port structure
+ *
+ * Revision 1.84 2001/03/06 09:04:55 mkunz
+ * Made some changes in instance calculation
+ *
+ * Revision 1.83 2001/02/15 09:15:32 mkunz
+ * Necessary changes for dual net mode added
+ *
+ * Revision 1.82 2001/02/07 08:24:19 mkunz
+ * -Made changes in handling of OID_SKGE_MTU
+ *
+ * Revision 1.81 2001/02/06 09:58:00 mkunz
+ * -Vpd bug fixed
+ * -OID_SKGE_MTU added
+ * -pnmi support for dual net mode. Interface function and macros extended
+ *
+ * Revision 1.80 2001/01/22 13:41:35 rassmann
+ * Supporting two nets on dual-port adapters.
+ *
+ * Revision 1.79 2000/12/05 14:57:40 cgoos
+ * SetStruct failed before first Link Up (link mode of virtual
+ * port "INDETERMINATED").
+ *
+ * Revision 1.78 2000/09/12 10:44:58 cgoos
+ * Fixed SK_PNMI_STORE_U32 calls with typecasted argument.
+ *
+ * Revision 1.77 2000/09/07 08:10:19 rwahl
+ * - Modified algorithm for 64bit NDIS statistic counters;
+ * returns 64bit or 32bit value depending on passed buffer
+ * size. Indicate capability for 64bit NDIS counter, if passed
+ * buffer size is zero. OID_GEN_XMIT_ERROR, OID_GEN_RCV_ERROR,
+ * and OID_GEN_RCV_NO_BUFFER handled as 64bit counter, too.
+ * - corrected OID_SKGE_RLMT_PORT_PREFERRED.
+ *
+ * Revision 1.76 2000/08/03 15:23:39 rwahl
+ * - Correction for FrameTooLong counter has to be moved to OID handling
+ * routines (instead of statistic counter routine).
+ * - Fix in XMAC Reset Event handling: Only offset counter for hardware
+ * statistic registers are updated.
+ *
+ * Revision 1.75 2000/08/01 16:46:05 rwahl
+ * - Added StatRxLongFrames counter and correction of FrameTooLong counter.
+ * - Added directive to control width (default = 32bit) of NDIS statistic
+ * counters (SK_NDIS_64BIT_CTR).
+ *
+ * Revision 1.74 2000/07/04 11:41:53 rwahl
+ * - Added volition connector type.
+ *
+ * Revision 1.73 2000/03/15 16:33:10 rwahl
+ * Fixed bug 10510; wrong reset of virtual port statistic counters.
+ *
+ * Revision 1.72 1999/12/06 16:15:53 rwahl
+ * Fixed problem of instance range for current and factory MAC address.
+ *
+ * Revision 1.71 1999/12/06 10:14:20 rwahl
+ * Fixed bug 10476; set operation for PHY_OPERATION_MODE.
+ *
+ * Revision 1.70 1999/11/22 13:33:34 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.69 1999/10/18 11:42:15 rwahl
+ * Added typecasts for checking event dependent param (debug only).
+ *
+ * Revision 1.68 1999/10/06 09:35:59 cgoos
+ * Added state check to PHY_READ call (hanged if called during startup).
+ *
+ * Revision 1.67 1999/09/22 09:53:20 rwahl
+ * - Read Broadcom register for updating fcs error counter (1000Base-T).
+ *
+ * Revision 1.66 1999/08/26 13:47:56 rwahl
+ * Added SK_DRIVER_SENDEVENT when queueing RLMT_CHANGE_THRES trap.
+ *
+ * Revision 1.65 1999/07/26 07:49:35 cgoos
+ * Added two typecasts to avoid compiler warnings.
+ *
+ * Revision 1.64 1999/05/20 09:24:12 cgoos
+ * Changes for 1000Base-T (sensors, Master/Slave).
+ *
+ * Revision 1.63 1999/04/13 15:11:58 mhaveman
+ * Moved include of rlmt.h to header skgepnmi.h because some macros
+ * are needed there.
+ *
+ * Revision 1.62 1999/04/13 15:08:07 mhaveman
+ * Replaced again SK_RLMT_CHECK_LINK with SK_PNMI_RLMT_MODE_CHK_LINK
+ * to grant unified interface by only using the PNMI header file.
+ * SK_PNMI_RLMT_MODE_CHK_LINK is defined the same as SK_RLMT_CHECK_LINK.
+ *
+ * Revision 1.61 1999/04/13 15:02:48 mhaveman
+ * Changes caused by review:
+ * -Changed some comments
+ * -Removed redundant check for OID_SKGE_PHYS_FAC_ADDR
+ * -Optimized PRESET check.
+ * -Meaning of error SK_ADDR_DUPLICATE_ADDRESS changed. Set of same
+ * address will now not cause this error. Removed corresponding check.
+ *
+ * Revision 1.60 1999/03/23 10:41:23 mhaveman
+ * Added comments.
+ *
+ * Revision 1.59 1999/02/19 08:01:28 mhaveman
+ * Fixed bug 10372 that after counter reset all ports were displayed
+ * as inactive.
+ *
+ * Revision 1.58 1999/02/16 18:04:47 mhaveman
+ * Fixed problem of twisted OIDs SENSOR_WAR_TIME and SENSOR_ERR_TIME.
+ *
+ * Revision 1.56 1999/01/27 12:29:11 mhaveman
+ * SkTimerStart was called with time value in milli seconds but needs
+ * micro seconds.
+ *
+ * Revision 1.55 1999/01/25 15:00:38 mhaveman
+ * Added support to allow multiple ports to be active. If this feature in
+ * future will be used, the Management Data Base variables PORT_ACTIVE
+ * and PORT_PREFERED should be moved to the port specific part of RLMT.
+ * Currently they return the values of the first active physical port
+ * found. A set to the virtual port will actually change all active
+ * physical ports. A get returns the melted values of all active physical
+ * ports. If the port values differ a return value INDETERMINATED will
+ * be returned. This effects especially the CONF group.
+ *
+ * Revision 1.54 1999/01/19 10:10:22 mhaveman
+ * -Fixed bug 10354: Counter values of virtual port were wrong after port
+ * switches
+ * -Added check if a switch to the same port is notified.
+ *
+ * Revision 1.53 1999/01/07 09:25:21 mhaveman
+ * Forgot to initialize a variable.
+ *
+ * Revision 1.52 1999/01/05 10:34:33 mhaveman
+ * Fixed little error in RlmtChangeEstimate calculation.
+ *
+ * Revision 1.51 1999/01/05 09:59:07 mhaveman
+ * -Moved timer start to init level 2
+ * -Redesigned port switch average calculation to avoid 64bit
+ * arithmetic.
+ *
+ * Revision 1.50 1998/12/10 15:13:59 mhaveman
+ * -Fixed: PHYS_CUR_ADDR returned wrong addresses
+ * -Fixed: RLMT_PORT_PREFERED and RLMT_CHANGE_THRES preset returned
+ * always BAD_VALUE.
+ * -Fixed: TRAP buffer seemed to sometimes suddenly empty
+ *
+ * Revision 1.49 1998/12/09 16:17:07 mhaveman
+ * Fixed: Couldnot delete VPD keys on UNIX.
+ *
+ * Revision 1.48 1998/12/09 14:11:10 mhaveman
+ * -Add: Debugmessage for XMAC_RESET supressed to minimize output.
+ * -Fixed: RlmtChangeThreshold will now be initialized.
+ * -Fixed: VPD_ENTRIES_LIST extended value with unnecessary space char.
+ * -Fixed: On VPD key creation an invalid key name could be created
+ * (e.g. A5)
+ * -Some minor changes in comments and code.
+ *
+ * Revision 1.47 1998/12/08 16:00:31 mhaveman
+ * -Fixed: For RLMT_PORT_ACTIVE will now be returned a 0 if no port
+ * is active.
+ * -Fixed: For the RLMT statistics group only the last value was
+ * returned and the rest of the buffer was filled with 0xff
+ * -Fixed: Mysteriously the preset on RLMT_MODE still returned
+ * BAD_VALUE.
+ * Revision 1.46 1998/12/08 10:04:56 mhaveman
+ * -Fixed: Preset on RLMT_MODE returned always BAD_VALUE error.
+ * -Fixed: Alignment error in GetStruct
+ * -Fixed: If for Get/Preset/SetStruct the buffer size is equal or
+ * larger than SK_PNMI_MIN_STRUCT_SIZE the return value is stored
+ * to the buffer. In this case the caller should always return
+ * ok to its upper routines. Only if the buffer size is less
+ * than SK_PNMI_MIN_STRUCT_SIZE and the return value is unequal
+ * to 0, an error should be returned by the caller.
+ * -Fixed: Wrong number of instances with RLMT statistic.
+ * -Fixed: Return now SK_LMODE_STAT_UNKNOWN if the LinkModeStatus is 0.
+ *
+ * Revision 1.45 1998/12/03 17:17:24 mhaveman
+ * -Removed for VPD create action the buffer size limitation to 4 bytes.
+ * -Pass now physical/active physical port to ADDR for CUR_ADDR set
+ *
+ * Revision 1.44 1998/12/03 15:14:35 mhaveman
+ * Another change to Vpd instance evaluation.
+ *
+ * Revision 1.43 1998/12/03 14:18:10 mhaveman
+ * -Fixed problem in PnmiSetStruct. It was impossible to set any value.
+ * -Removed VPD key evaluation for VPD_FREE_BYTES and VPD_ACTION.
+ *
+ * Revision 1.42 1998/12/03 11:31:47 mhaveman
+ * Inserted cast to satisfy lint.
+ *
+ * Revision 1.41 1998/12/03 11:28:16 mhaveman
+ * Removed SK_PNMI_CHECKPTR
+ *
+ * Revision 1.40 1998/12/03 11:19:07 mhaveman
+ * Fixed problems
+ * -A set to virtual port will now be ignored. A set with broadcast
+ * address to any port will be ignored.
+ * -GetStruct function made VPD instance calculation wrong.
+ * -Prefered port returned -1 instead of 0.
+ *
+ * Revision 1.39 1998/11/26 15:30:29 mhaveman
+ * Added sense mode to link mode.
+ *
+ * Revision 1.38 1998/11/23 15:34:00 mhaveman
+ * -Fixed bug for RX counters. On an RX overflow interrupt the high
+ * words of all RX counters were incremented.
+ * -SET operations on FLOWCTRL_MODE and LINK_MODE accept now the
+ * value 0, which has no effect. It is usefull for multiple instance
+ * SETs.
+ *
+ * Revision 1.37 1998/11/20 08:02:04 mhaveman
+ * -Fixed: Ports were compared with MAX_SENSORS
+ * -Fixed: Crash in GetTrapEntry with MEMSET macro
+ * -Fixed: Conversions between physical, logical port index and instance
+ *
+ * Revision 1.36 1998/11/16 07:48:53 mhaveman
+ * Casted SK_DRIVER_SENDEVENT with (void) to eleminate compiler warnings
+ * on Solaris.
+ *
+ * Revision 1.35 1998/11/16 07:45:34 mhaveman
+ * SkAddrOverride now returns value and will be checked.
+ *
+ * Revision 1.34 1998/11/10 13:40:37 mhaveman
+ * Needed to change interface, because NT driver needs a return value
+ * of needed buffer space on TOO_SHORT errors. Therefore all
+ * SkPnmiGet/Preset/Set functions now have a pointer to the length
+ * parameter, where the needed space on error is returned.
+ *
+ * Revision 1.33 1998/11/03 13:52:46 mhaveman
+ * Made file lint conform.
+ *
+ * Revision 1.32 1998/11/03 13:19:07 mhaveman
+ * The events SK_HWEV_SET_LMODE and SK_HWEV_SET_FLOWMODE pass now in
+ * Para32[0] the physical MAC index and in Para32[1] the new mode.
+ *
+ * Revision 1.31 1998/11/03 12:30:40 gklug
+ * fix: compiler warning memset
+ *
+ * Revision 1.30 1998/11/03 12:04:46 mhaveman
+ * Fixed problem in SENSOR_VALUE, which wrote beyond the buffer end
+ * Fixed alignment problem with CHIPSET.
+ *
+ * Revision 1.29 1998/11/02 11:23:54 mhaveman
+ * Corrected SK_ERROR_LOG to SK_ERR_LOG. Sorry.
+ *
+ * Revision 1.28 1998/11/02 10:47:16 mhaveman
+ * Added syslog messages for internal errors.
+ *
+ * Revision 1.27 1998/10/30 15:48:06 mhaveman
+ * Fixed problems after simulation of SK_PNMI_EVT_CHG_EST_TIMER and
+ * RlmtChangeThreshold calculation.
+ *
+ * Revision 1.26 1998/10/29 15:36:55 mhaveman
+ * -Fixed bug in trap buffer handling.
+ * -OID_SKGE_DRIVER_DESCR, OID_SKGE_DRIVER_VERSION, OID_SKGE_HW_DESCR,
+ * OID_SKGE_HW_VERSION, OID_SKGE_VPD_ENTRIES_LIST, OID_SKGE_VPD_KEY,
+ * OID_SKGE_VPD_VALUE, and OID_SKGE_SENSOR_DESCR return values with
+ * a leading octet before each string storing the string length.
+ * -Perform a RlmtUpdate during SK_PNMI_EVT_XMAC_RESET to minimize
+ * RlmtUpdate calls in GetStatVal.
+ * -Inserted SK_PNMI_CHECKFLAGS macro increase readability.
+ *
+ * Revision 1.25 1998/10/29 08:50:36 mhaveman
+ * Fixed problems after second event simulation.
+ *
+ * Revision 1.24 1998/10/28 08:44:37 mhaveman
+ * -Fixed alignment problem
+ * -Fixed problems during event simulation
+ * -Fixed sequence of error return code (INSTANCE -> ACCESS -> SHORT)
+ * -Changed type of parameter Instance back to SK_U32 because of VPD
+ * -Updated new VPD function calls
+ *
+ * Revision 1.23 1998/10/23 10:16:37 mhaveman
+ * Fixed bugs after buffer test simulation.
+ *
+ * Revision 1.22 1998/10/21 13:23:52 mhaveman
+ * -Call syntax of SkOsGetTime() changed to SkOsGetTime(pAc).
+ * -Changed calculation of hundrets of seconds.
+ *
+ * Revision 1.20 1998/10/20 07:30:45 mhaveman
+ * Made type changes to unsigned integer where possible.
+ *
+ * Revision 1.19 1998/10/19 10:51:30 mhaveman
+ * -Made Bug fixes after simulation run
+ * -Renamed RlmtMAC... to RlmtPort...
+ * -Marked workarounds with Errata comments
+ *
+ * Revision 1.18 1998/10/14 07:50:08 mhaveman
+ * -For OID_SKGE_LINK_STATUS the link down detection has moved from RLMT
+ * to HWACCESS.
+ * -Provided all MEMCPY/MEMSET macros with (char *) pointers, because
+ * Solaris throwed warnings when mapping to bcopy/bset.
+ *
+ * Revision 1.17 1998/10/13 07:42:01 mhaveman
+ * -Added OIDs OID_SKGE_TRAP_NUMBER and OID_SKGE_ALL_DATA
+ * -Removed old cvs history entries
+ * -Renamed MacNumber to PortNumber
+ *
+ * Revision 1.16 1998/10/07 10:52:49 mhaveman
+ * -Inserted handling of some OID_GEN_ Ids for windows
+ * -Fixed problem with 803.2 statistic.
+ *
+ * Revision 1.15 1998/10/01 09:16:29 mhaveman
+ * Added Debug messages for function call and UpdateFlag tracing.
+ *
+ * Revision 1.14 1998/09/30 13:39:09 mhaveman
+ * -Reduced namings of 'MAC' by replacing them with 'PORT'.
+ * -Completed counting of OID_SKGE_RX_HW_ERROR_CTS,
+ * OID_SKGE_TX_HW_ERROR_CTS,
+ * OID_SKGE_IN_ERRORS_CTS, and OID_SKGE_OUT_ERROR_CTS.
+ * -SET check for RlmtMode
+ *
+ * Revision 1.13 1998/09/28 13:13:08 mhaveman
+ * Hide strcmp, strlen, and strncpy behind macros SK_STRCMP, SK_STRLEN,
+ * and SK_STRNCPY. (Same reasons as for mem.. and MEM..)
+ *
+ * Revision 1.12 1998/09/16 08:18:36 cgoos
+ * Fix: XM_INxx and XM_OUTxx called with different parameter order:
+ * sometimes IoC,Mac,... sometimes Mac,IoC,... Now always first variant.
+ * Fix: inserted "Pnmi." into some pAC->pDriverDescription / Version.
+ * Change: memset, memcpy to makros SK_MEMSET, SK_MEMCPY
+ *
+ * Revision 1.11 1998/09/04 17:01:45 mhaveman
+ * Added SyncCounter as macro and OID_SKGE_.._NO_DESCR_CTS to
+ * OID_SKGE_RX_NO_BUF_CTS.
+ *
+ * Revision 1.10 1998/09/04 14:35:35 mhaveman
+ * Added macro counters, that are counted by driver.
+ *
+ ****************************************************************************/
+
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+static const char SysKonnectFileId[] =
+ "@(#) $Id: skgepnmi.c,v 1.102 2002/12/16 14:03:24 tschilli Exp $"
+ " (C) SysKonnect.";
+
+#include "h/skdrv1st.h"
+#include "h/sktypes.h"
+#include "h/xmac_ii.h"
+#include "h/skdebug.h"
+#include "h/skqueue.h"
+#include "h/skgepnmi.h"
+#include "h/skgesirq.h"
+#include "h/skcsum.h"
+#include "h/skvpd.h"
+#include "h/skgehw.h"
+#include "h/skgeinit.h"
+#include "h/skdrv2nd.h"
+#include "h/skgepnm2.h"
+#ifdef SK_POWER_MGMT
+#include "h/skgepmgt.h"
+#endif
+/* defines *******************************************************************/
+
+#ifndef DEBUG
+#define PNMI_STATIC static
+#else /* DEBUG */
+#define PNMI_STATIC
+#endif /* DEBUG */
+
+/*
+ * Public Function prototypes
+ */
+int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int level);
+int SkPnmiGetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf,
+ unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
+int SkPnmiPreSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf,
+ unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
+int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf,
+ unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
+int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf,
+ unsigned int *pLen, SK_U32 NetIndex);
+int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf,
+ unsigned int *pLen, SK_U32 NetIndex);
+int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf,
+ unsigned int *pLen, SK_U32 NetIndex);
+int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Param);
+
+
+/*
+ * Private Function prototypes
+ */
+
+PNMI_STATIC SK_U8 CalculateLinkModeStatus(SK_AC *pAC, SK_IOC IoC, unsigned int
+ PhysPortIndex);
+PNMI_STATIC SK_U8 CalculateLinkStatus(SK_AC *pAC, SK_IOC IoC, unsigned int
+ PhysPortIndex);
+PNMI_STATIC void CopyMac(char *pDst, SK_MAC_ADDR *pMac);
+PNMI_STATIC void CopyTrapQueue(SK_AC *pAC, char *pDstBuf);
+PNMI_STATIC SK_U64 GetPhysStatVal(SK_AC *pAC, SK_IOC IoC,
+ unsigned int PhysPortIndex, unsigned int StatIndex);
+PNMI_STATIC SK_U64 GetStatVal(SK_AC *pAC, SK_IOC IoC, unsigned int LogPortIndex,
+ unsigned int StatIndex, SK_U32 NetIndex);
+PNMI_STATIC char* GetTrapEntry(SK_AC *pAC, SK_U32 TrapId, unsigned int Size);
+PNMI_STATIC void GetTrapQueueLen(SK_AC *pAC, unsigned int *pLen,
+ unsigned int *pEntries);
+PNMI_STATIC int GetVpdKeyArr(SK_AC *pAC, SK_IOC IoC, char *pKeyArr,
+ unsigned int KeyArrLen, unsigned int *pKeyNo);
+PNMI_STATIC int LookupId(SK_U32 Id);
+PNMI_STATIC int MacUpdate(SK_AC *pAC, SK_IOC IoC, unsigned int FirstMac,
+ unsigned int LastMac);
+PNMI_STATIC int PnmiStruct(SK_AC *pAC, SK_IOC IoC, int Action, char *pBuf,
+ unsigned int *pLen, SK_U32 NetIndex);
+PNMI_STATIC int PnmiVar(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id,
+ char *pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
+PNMI_STATIC void QueueRlmtNewMacTrap(SK_AC *pAC, unsigned int ActiveMac);
+PNMI_STATIC void QueueRlmtPortTrap(SK_AC *pAC, SK_U32 TrapId,
+ unsigned int PortIndex);
+PNMI_STATIC void QueueSensorTrap(SK_AC *pAC, SK_U32 TrapId,
+ unsigned int SensorIndex);
+PNMI_STATIC void QueueSimpleTrap(SK_AC *pAC, SK_U32 TrapId);
+PNMI_STATIC void ResetCounter(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex);
+PNMI_STATIC int RlmtUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex);
+PNMI_STATIC int SirqUpdate(SK_AC *pAC, SK_IOC IoC);
+PNMI_STATIC void VirtualConf(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, char *pBuf);
+PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id, char *pBuf,
+ unsigned int *pLen, SK_U32 Instance, unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC void CheckVctStatus(SK_AC *, SK_IOC, char *, SK_U32, SK_U32);
+
+/*
+ * Table to correlate OID with handler function and index to
+ * hardware register stored in StatAddress if applicable.
+ */
+#include "skgemib.c"
+
+/* global variables **********************************************************/
+
+/*
+ * Overflow status register bit table and corresponding counter
+ * dependent on MAC type - the number relates to the size of overflow
+ * mask returned by the pFnMacOverflow function
+ */
+PNMI_STATIC const SK_U16 StatOvrflwBit[][SK_PNMI_MAC_TYPES] = {
+/* Bit0 */ { SK_PNMI_HTX, SK_PNMI_HTX_UNICAST},
+/* Bit1 */ { SK_PNMI_HTX_OCTETHIGH, SK_PNMI_HTX_BROADCAST},
+/* Bit2 */ { SK_PNMI_HTX_OCTETLOW, SK_PNMI_HTX_PMACC},
+/* Bit3 */ { SK_PNMI_HTX_BROADCAST, SK_PNMI_HTX_MULTICAST},
+/* Bit4 */ { SK_PNMI_HTX_MULTICAST, SK_PNMI_HTX_OCTETLOW},
+/* Bit5 */ { SK_PNMI_HTX_UNICAST, SK_PNMI_HTX_OCTETHIGH},
+/* Bit6 */ { SK_PNMI_HTX_LONGFRAMES, SK_PNMI_HTX_64},
+/* Bit7 */ { SK_PNMI_HTX_BURST, SK_PNMI_HTX_127},
+/* Bit8 */ { SK_PNMI_HTX_PMACC, SK_PNMI_HTX_255},
+/* Bit9 */ { SK_PNMI_HTX_MACC, SK_PNMI_HTX_511},
+/* Bit10 */ { SK_PNMI_HTX_SINGLE_COL, SK_PNMI_HTX_1023},
+/* Bit11 */ { SK_PNMI_HTX_MULTI_COL, SK_PNMI_HTX_MAX},
+/* Bit12 */ { SK_PNMI_HTX_EXCESS_COL, SK_PNMI_HTX_LONGFRAMES},
+/* Bit13 */ { SK_PNMI_HTX_LATE_COL, SK_PNMI_HTX_RESERVED},
+/* Bit14 */ { SK_PNMI_HTX_DEFFERAL, SK_PNMI_HTX_COL},
+/* Bit15 */ { SK_PNMI_HTX_EXCESS_DEF, SK_PNMI_HTX_LATE_COL},
+/* Bit16 */ { SK_PNMI_HTX_UNDERRUN, SK_PNMI_HTX_EXCESS_COL},
+/* Bit17 */ { SK_PNMI_HTX_CARRIER, SK_PNMI_HTX_MULTI_COL},
+/* Bit18 */ { SK_PNMI_HTX_UTILUNDER, SK_PNMI_HTX_SINGLE_COL},
+/* Bit19 */ { SK_PNMI_HTX_UTILOVER, SK_PNMI_HTX_UNDERRUN},
+/* Bit20 */ { SK_PNMI_HTX_64, SK_PNMI_HTX_RESERVED},
+/* Bit21 */ { SK_PNMI_HTX_127, SK_PNMI_HTX_RESERVED},
+/* Bit22 */ { SK_PNMI_HTX_255, SK_PNMI_HTX_RESERVED},
+/* Bit23 */ { SK_PNMI_HTX_511, SK_PNMI_HTX_RESERVED},
+/* Bit24 */ { SK_PNMI_HTX_1023, SK_PNMI_HTX_RESERVED},
+/* Bit25 */ { SK_PNMI_HTX_MAX, SK_PNMI_HTX_RESERVED},
+/* Bit26 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
+/* Bit27 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
+/* Bit28 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
+/* Bit29 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
+/* Bit30 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
+/* Bit31 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
+/* Bit32 */ { SK_PNMI_HRX, SK_PNMI_HRX_UNICAST},
+/* Bit33 */ { SK_PNMI_HRX_OCTETHIGH, SK_PNMI_HRX_BROADCAST},
+/* Bit34 */ { SK_PNMI_HRX_OCTETLOW, SK_PNMI_HRX_PMACC},
+/* Bit35 */ { SK_PNMI_HRX_BROADCAST, SK_PNMI_HRX_MULTICAST},
+/* Bit36 */ { SK_PNMI_HRX_MULTICAST, SK_PNMI_HRX_FCS},
+/* Bit37 */ { SK_PNMI_HRX_UNICAST, SK_PNMI_HRX_RESERVED},
+/* Bit38 */ { SK_PNMI_HRX_PMACC, SK_PNMI_HRX_OCTETLOW},
+/* Bit39 */ { SK_PNMI_HRX_MACC, SK_PNMI_HRX_OCTETHIGH},
+/* Bit40 */ { SK_PNMI_HRX_PMACC_ERR, SK_PNMI_HRX_BADOCTETLOW},
+/* Bit41 */ { SK_PNMI_HRX_MACC_UNKWN, SK_PNMI_HRX_BADOCTETHIGH},
+/* Bit42 */ { SK_PNMI_HRX_BURST, SK_PNMI_HRX_UNDERSIZE},
+/* Bit43 */ { SK_PNMI_HRX_MISSED, SK_PNMI_HRX_RUNT},
+/* Bit44 */ { SK_PNMI_HRX_FRAMING, SK_PNMI_HRX_64},
+/* Bit45 */ { SK_PNMI_HRX_OVERFLOW, SK_PNMI_HRX_127},
+/* Bit46 */ { SK_PNMI_HRX_JABBER, SK_PNMI_HRX_255},
+/* Bit47 */ { SK_PNMI_HRX_CARRIER, SK_PNMI_HRX_511},
+/* Bit48 */ { SK_PNMI_HRX_IRLENGTH, SK_PNMI_HRX_1023},
+/* Bit49 */ { SK_PNMI_HRX_SYMBOL, SK_PNMI_HRX_MAX},
+/* Bit50 */ { SK_PNMI_HRX_SHORTS, SK_PNMI_HRX_LONGFRAMES},
+/* Bit51 */ { SK_PNMI_HRX_RUNT, SK_PNMI_HRX_TOO_LONG},
+/* Bit52 */ { SK_PNMI_HRX_TOO_LONG, SK_PNMI_HRX_JABBER},
+/* Bit53 */ { SK_PNMI_HRX_FCS, SK_PNMI_HRX_RESERVED},
+/* Bit54 */ { SK_PNMI_HRX_RESERVED, SK_PNMI_HRX_OVERFLOW},
+/* Bit55 */ { SK_PNMI_HRX_CEXT, SK_PNMI_HRX_RESERVED},
+/* Bit56 */ { SK_PNMI_HRX_UTILUNDER, SK_PNMI_HRX_RESERVED},
+/* Bit57 */ { SK_PNMI_HRX_UTILOVER, SK_PNMI_HRX_RESERVED},
+/* Bit58 */ { SK_PNMI_HRX_64, SK_PNMI_HRX_RESERVED},
+/* Bit59 */ { SK_PNMI_HRX_127, SK_PNMI_HRX_RESERVED},
+/* Bit60 */ { SK_PNMI_HRX_255, SK_PNMI_HRX_RESERVED},
+/* Bit61 */ { SK_PNMI_HRX_511, SK_PNMI_HRX_RESERVED},
+/* Bit62 */ { SK_PNMI_HRX_1023, SK_PNMI_HRX_RESERVED},
+/* Bit63 */ { SK_PNMI_HRX_MAX, SK_PNMI_HRX_RESERVED}
+};
+
+/*
+ * Table for hardware register saving on resets and port switches
+ */
+PNMI_STATIC const SK_PNMI_STATADDR StatAddr[SK_PNMI_MAX_IDX][SK_PNMI_MAC_TYPES] = {
+ /* SK_PNMI_HTX */
+ {{XM_TXF_OK, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HTX_OCTETHIGH */
+ {{XM_TXO_OK_HI, SK_TRUE}, {GM_TXO_OK_HI, SK_TRUE}},
+ /* SK_PNMI_HTX_OCTETLOW */
+ {{XM_TXO_OK_LO, SK_FALSE}, {GM_TXO_OK_LO, SK_FALSE}},
+ /* SK_PNMI_HTX_BROADCAST */
+ {{XM_TXF_BC_OK, SK_TRUE}, {GM_TXF_BC_OK, SK_TRUE}},
+ /* SK_PNMI_HTX_MULTICAST */
+ {{XM_TXF_MC_OK, SK_TRUE}, {GM_TXF_MC_OK, SK_TRUE}},
+ /* SK_PNMI_HTX_UNICAST */
+ {{XM_TXF_UC_OK, SK_TRUE}, {GM_TXF_UC_OK, SK_TRUE}},
+ /* SK_PNMI_HTX_BURST */
+ {{XM_TXE_BURST, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HTX_PMACC */
+ {{XM_TXF_MPAUSE, SK_TRUE}, {GM_TXF_MPAUSE, SK_TRUE}},
+ /* SK_PNMI_HTX_MACC */
+ {{XM_TXF_MCTRL, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HTX_COL */
+ {{0, SK_FALSE}, {GM_TXF_COL, SK_TRUE}},
+ /* SK_PNMI_HTX_SINGLE_COL */
+ {{XM_TXF_SNG_COL, SK_TRUE}, {GM_TXF_SNG_COL, SK_TRUE}},
+ /* SK_PNMI_HTX_MULTI_COL */
+ {{XM_TXF_MUL_COL, SK_TRUE}, {GM_TXF_MUL_COL, SK_TRUE}},
+ /* SK_PNMI_HTX_EXCESS_COL */
+ {{XM_TXF_ABO_COL, SK_TRUE}, {GM_TXF_ABO_COL, SK_TRUE}},
+ /* SK_PNMI_HTX_LATE_COL */
+ {{XM_TXF_LAT_COL, SK_TRUE}, {GM_TXF_LAT_COL, SK_TRUE}},
+ /* SK_PNMI_HTX_DEFFERAL */
+ {{XM_TXF_DEF, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HTX_EXCESS_DEF */
+ {{XM_TXF_EX_DEF, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HTX_UNDERRUN */
+ {{XM_TXE_FIFO_UR, SK_TRUE}, {GM_TXE_FIFO_UR, SK_TRUE}},
+ /* SK_PNMI_HTX_CARRIER */
+ {{XM_TXE_CS_ERR, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HTX_UTILUNDER */
+ {{0, SK_FALSE}, {0, SK_FALSE}},
+ /* SK_PNMI_HTX_UTILOVER */
+ {{0, SK_FALSE}, {0, SK_FALSE}},
+ /* SK_PNMI_HTX_64 */
+ {{XM_TXF_64B, SK_TRUE}, {GM_TXF_64B, SK_TRUE}},
+ /* SK_PNMI_HTX_127 */
+ {{XM_TXF_127B, SK_TRUE}, {GM_TXF_127B, SK_TRUE}},
+ /* SK_PNMI_HTX_255 */
+ {{XM_TXF_255B, SK_TRUE}, {GM_TXF_255B, SK_TRUE}},
+ /* SK_PNMI_HTX_511 */
+ {{XM_TXF_511B, SK_TRUE}, {GM_TXF_511B, SK_TRUE}},
+ /* SK_PNMI_HTX_1023 */
+ {{XM_TXF_1023B, SK_TRUE}, {GM_TXF_1023B, SK_TRUE}},
+ /* SK_PNMI_HTX_MAX */
+ {{XM_TXF_MAX_SZ, SK_TRUE}, {GM_TXF_1518B, SK_TRUE}},
+ /* SK_PNMI_HTX_LONGFRAMES */
+ {{XM_TXF_LONG, SK_TRUE}, {GM_TXF_MAX_SZ, SK_TRUE}},
+ /* SK_PNMI_HTX_SYNC */
+ {{0, SK_FALSE}, {0, SK_FALSE}},
+ /* SK_PNMI_HTX_SYNC_OCTET */
+ {{0, SK_FALSE}, {0, SK_FALSE}},
+ /* SK_PNMI_HTX_RESERVED */
+ {{0, SK_FALSE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX */
+ {{XM_RXF_OK, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_OCTETHIGH */
+ {{XM_RXO_OK_HI, SK_TRUE}, {GM_RXO_OK_HI, SK_TRUE}},
+ /* SK_PNMI_HRX_OCTETLOW */
+ {{XM_RXO_OK_LO, SK_FALSE}, {GM_RXO_OK_LO, SK_FALSE}},
+ /* SK_PNMI_HRX_BADOCTETHIGH */
+ {{0, SK_FALSE}, {GM_RXO_ERR_HI, SK_TRUE}},
+ /* SK_PNMI_HRX_BADOCTETLOW */
+ {{0, SK_FALSE}, {GM_RXO_ERR_LO, SK_TRUE}},
+ /* SK_PNMI_HRX_BROADCAST */
+ {{XM_RXF_BC_OK, SK_TRUE}, {GM_RXF_BC_OK, SK_TRUE}},
+ /* SK_PNMI_HRX_MULTICAST */
+ {{XM_RXF_MC_OK, SK_TRUE}, {GM_RXF_MC_OK, SK_TRUE}},
+ /* SK_PNMI_HRX_UNICAST */
+ {{XM_RXF_UC_OK, SK_TRUE}, {GM_RXF_UC_OK, SK_TRUE}},
+ /* SK_PNMI_HRX_PMACC */
+ {{XM_RXF_MPAUSE, SK_TRUE}, {GM_RXF_MPAUSE, SK_TRUE}},
+ /* SK_PNMI_HRX_MACC */
+ {{XM_RXF_MCTRL, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_PMACC_ERR */
+ {{XM_RXF_INV_MP, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_MACC_UNKWN */
+ {{XM_RXF_INV_MOC, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_BURST */
+ {{XM_RXE_BURST, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_MISSED */
+ {{XM_RXE_FMISS, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_FRAMING */
+ {{XM_RXF_FRA_ERR, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_UNDERSIZE */
+ {{0, SK_FALSE},{GM_RXF_SHT, SK_TRUE}},
+ /* SK_PNMI_HRX_OVERFLOW */
+ {{XM_RXE_FIFO_OV, SK_TRUE}, {GM_RXE_FIFO_OV, SK_TRUE}},
+ /* SK_PNMI_HRX_JABBER */
+ {{XM_RXF_JAB_PKT, SK_TRUE}, {GM_RXF_JAB_PKT, SK_TRUE}},
+ /* SK_PNMI_HRX_CARRIER */
+ {{XM_RXE_CAR_ERR, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_IRLENGTH */
+ {{XM_RXF_LEN_ERR, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_SYMBOL */
+ {{XM_RXE_SYM_ERR, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_SHORTS */
+ {{XM_RXE_SHT_ERR, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_RUNT */
+ {{XM_RXE_RUNT, SK_TRUE}, {GM_RXE_FRAG, SK_TRUE}},
+ /* SK_PNMI_HRX_TOO_LONG */
+ {{XM_RXF_LNG_ERR, SK_TRUE}, {GM_RXF_LNG_ERR, SK_TRUE}},
+ /* SK_PNMI_HRX_FCS */
+ {{XM_RXF_FCS_ERR, SK_TRUE}, {GM_RXF_FCS_ERR, SK_TRUE}},
+ /* SK_PNMI_HRX_CEXT */
+ {{XM_RXF_CEX_ERR, SK_TRUE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_UTILUNDER */
+ {{0, SK_FALSE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_UTILOVER */
+ {{0, SK_FALSE}, {0, SK_FALSE}},
+ /* SK_PNMI_HRX_64 */
+ {{XM_RXF_64B, SK_TRUE}, {GM_RXF_64B, SK_TRUE}},
+ /* SK_PNMI_HRX_127 */
+ {{XM_RXF_127B, SK_TRUE}, {GM_RXF_127B, SK_TRUE}},
+ /* SK_PNMI_HRX_255 */
+ {{XM_RXF_255B, SK_TRUE}, {GM_RXF_255B, SK_TRUE}},
+ /* SK_PNMI_HRX_511 */
+ {{XM_RXF_511B, SK_TRUE}, {GM_RXF_511B, SK_TRUE}},
+ /* SK_PNMI_HRX_1023 */
+ {{XM_RXF_1023B, SK_TRUE}, {GM_RXF_1023B, SK_TRUE}},
+ /* SK_PNMI_HRX_MAX */
+ {{XM_RXF_MAX_SZ, SK_TRUE}, {GM_RXF_1518B, SK_TRUE}},
+ /* SK_PNMI_HRX_LONGFRAMES */
+ {{0, SK_FALSE}, {GM_RXF_MAX_SZ, SK_TRUE}},
+ /* SK_PNMI_HRX_RESERVED */
+ {{0, SK_FALSE}, {0, SK_FALSE}}
+};
+
+
+/*****************************************************************************
+ *
+ * Public functions
+ *
+ */
+
+/*****************************************************************************
+ *
+ * SkPnmiInit - Init function of PNMI
+ *
+ * Description:
+ * SK_INIT_DATA: Initialises the data structures
+ * SK_INIT_IO: Resets the XMAC statistics, determines the device and
+ * connector type.
+ * SK_INIT_RUN: Starts a timer event for port switch per hour
+ * calculation.
+ *
+ * Returns:
+ * Always 0
+ */
+int SkPnmiInit(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Level) /* Initialization level */
+{
+ unsigned int PortMax; /* Number of ports */
+ unsigned int PortIndex; /* Current port index in loop */
+ SK_U16 Val16; /* Multiple purpose 16 bit variable */
+ SK_U8 Val8; /* Mulitple purpose 8 bit variable */
+ SK_EVPARA EventParam; /* Event struct for timer event */
+ SK_GEPORT *pPrt;
+ SK_PNMI_VCT *pVctBackupData;
+
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: SkPnmiInit: Called, level=%d\n", Level));
+
+ switch (Level) {
+
+ case SK_INIT_DATA:
+ SK_MEMSET((char *)&pAC->Pnmi, 0, sizeof(pAC->Pnmi));
+ pAC->Pnmi.TrapBufFree = SK_PNMI_TRAP_QUEUE_LEN;
+ pAC->Pnmi.StartUpTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC));
+ pAC->Pnmi.RlmtChangeThreshold = SK_PNMI_DEF_RLMT_CHG_THRES;
+ for (PortIndex = 0; PortIndex < SK_MAX_MACS; PortIndex ++) {
+
+ pAC->Pnmi.Port[PortIndex].ActiveFlag = SK_FALSE;
+ pAC->Pnmi.DualNetActiveFlag = SK_FALSE;
+ }
+
+#ifdef SK_PNMI_CHECK
+ if (SK_PNMI_MAX_IDX != SK_PNMI_CNT_NO) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR049, SK_PNMI_ERR049MSG);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL,
+ ("CounterOffset struct size (%d) differs from"
+ "SK_PNMI_MAX_IDX (%d)\n",
+ SK_PNMI_CNT_NO, SK_PNMI_MAX_IDX));
+ BRK;
+ }
+
+ if (SK_PNMI_MAX_IDX !=
+ (sizeof(StatAddr) / (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES))) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR050, SK_PNMI_ERR050MSG);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL,
+ ("StatAddr table size (%d) differs from "
+ "SK_PNMI_MAX_IDX (%d)\n",
+ (sizeof(StatAddr) /
+ (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES)),
+ SK_PNMI_MAX_IDX));
+ BRK;
+ }
+#endif /* SK_PNMI_CHECK */
+ break;
+
+ case SK_INIT_IO:
+ /*
+ * Reset MAC counters
+ */
+ PortMax = pAC->GIni.GIMacsFound;
+
+ for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) {
+
+ pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PortIndex);
+ }
+
+ /* Initialize DSP variables for Vct() to 0xff => Never written! */
+ for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) {
+ pPrt = &pAC->GIni.GP[PortIndex];
+ pPrt->PCableLen =0xff;
+ pVctBackupData = &pAC->Pnmi.VctBackup[PortIndex];
+ pVctBackupData->PCableLen = 0xff;
+ }
+
+ /*
+ * Get pci bus speed
+ */
+ SK_IN16(IoC, B0_CTST, &Val16);
+ if ((Val16 & CS_BUS_CLOCK) == 0) {
+
+ pAC->Pnmi.PciBusSpeed = 33;
+ }
+ else {
+ pAC->Pnmi.PciBusSpeed = 66;
+ }
+
+ /*
+ * Get pci bus width
+ */
+ SK_IN16(IoC, B0_CTST, &Val16);
+ if ((Val16 & CS_BUS_SLOT_SZ) == 0) {
+
+ pAC->Pnmi.PciBusWidth = 32;
+ }
+ else {
+ pAC->Pnmi.PciBusWidth = 64;
+ }
+
+ /*
+ * Get chipset
+ */
+ switch (pAC->GIni.GIChipId) {
+ case CHIP_ID_GENESIS:
+ pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_XMAC;
+ break;
+
+ case CHIP_ID_YUKON:
+ pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_YUKON;
+ break;
+
+ default:
+ break;
+ }
+
+ /*
+ * Get PMD and DeviceType
+ */
+ SK_IN8(IoC, B2_PMD_TYP, &Val8);
+ switch (Val8) {
+ case 'S':
+ pAC->Pnmi.PMD = 3;
+ if (pAC->GIni.GIMacsFound > 1) {
+
+ pAC->Pnmi.DeviceType = 0x00020002;
+ }
+ else {
+ pAC->Pnmi.DeviceType = 0x00020001;
+ }
+ break;
+
+ case 'L':
+ pAC->Pnmi.PMD = 2;
+ if (pAC->GIni.GIMacsFound > 1) {
+
+ pAC->Pnmi.DeviceType = 0x00020004;
+ }
+ else {
+ pAC->Pnmi.DeviceType = 0x00020003;
+ }
+ break;
+
+ case 'C':
+ pAC->Pnmi.PMD = 4;
+ if (pAC->GIni.GIMacsFound > 1) {
+
+ pAC->Pnmi.DeviceType = 0x00020006;
+ }
+ else {
+ pAC->Pnmi.DeviceType = 0x00020005;
+ }
+ break;
+
+ case 'T':
+ pAC->Pnmi.PMD = 5;
+ if (pAC->GIni.GIMacsFound > 1) {
+
+ pAC->Pnmi.DeviceType = 0x00020008;
+ }
+ else {
+ pAC->Pnmi.DeviceType = 0x00020007;
+ }
+ break;
+
+ default :
+ pAC->Pnmi.PMD = 1;
+ pAC->Pnmi.DeviceType = 0;
+ break;
+ }
+
+ /*
+ * Get connector
+ */
+ SK_IN8(IoC, B2_CONN_TYP, &Val8);
+ switch (Val8) {
+ case 'C':
+ pAC->Pnmi.Connector = 2;
+ break;
+
+ case 'D':
+ pAC->Pnmi.Connector = 3;
+ break;
+
+ case 'F':
+ pAC->Pnmi.Connector = 4;
+ break;
+
+ case 'J':
+ pAC->Pnmi.Connector = 5;
+ break;
+
+ case 'V':
+ pAC->Pnmi.Connector = 6;
+ break;
+
+ default:
+ pAC->Pnmi.Connector = 1;
+ break;
+ }
+ break;
+
+ case SK_INIT_RUN:
+ /*
+ * Start timer for RLMT change counter
+ */
+ SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam));
+ SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer,
+ 28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER,
+ EventParam);
+ break;
+
+ default:
+ break; /* Nothing todo */
+ }
+
+ return (0);
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiGetVar - Retrieves the value of a single OID
+ *
+ * Description:
+ * Calls a general sub-function for all this stuff. If the instance
+ * -1 is passed, the values of all instances are returned in an
+ * array of values.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take
+ * the data.
+ * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+int SkPnmiGetVar(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+SK_U32 Id, /* Object ID that is to be processed */
+void *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: SkPnmiGetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n",
+ Id, *pLen, Instance, NetIndex));
+
+ return (PnmiVar(pAC, IoC, SK_PNMI_GET, Id, (char *)pBuf, pLen,
+ Instance, NetIndex));
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiPreSetVar - Presets the value of a single OID
+ *
+ * Description:
+ * Calls a general sub-function for all this stuff. The preset does
+ * the same as a set, but returns just before finally setting the
+ * new value. This is usefull to check if a set might be successfull.
+ * If as instance a -1 is passed, an array of values is supposed and
+ * all instance of the OID will be set.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid
+ * value range.
+ * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set.
+ * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown.
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+int SkPnmiPreSetVar(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+SK_U32 Id, /* Object ID that is to be processed */
+void *pBuf, /* Buffer which stores the mgmt data to be set */
+unsigned int *pLen, /* Total length of mgmt data */
+SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: SkPnmiPreSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n",
+ Id, *pLen, Instance, NetIndex));
+
+
+ return (PnmiVar(pAC, IoC, SK_PNMI_PRESET, Id, (char *)pBuf, pLen,
+ Instance, NetIndex));
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiSetVar - Sets the value of a single OID
+ *
+ * Description:
+ * Calls a general sub-function for all this stuff. The preset does
+ * the same as a set, but returns just before finally setting the
+ * new value. This is usefull to check if a set might be successfull.
+ * If as instance a -1 is passed, an array of values is supposed and
+ * all instance of the OID will be set.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid
+ * value range.
+ * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set.
+ * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown.
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+int SkPnmiSetVar(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+SK_U32 Id, /* Object ID that is to be processed */
+void *pBuf, /* Buffer which stores the mgmt data to be set */
+unsigned int *pLen, /* Total length of mgmt data */
+SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: SkPnmiSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n",
+ Id, *pLen, Instance, NetIndex));
+
+ return (PnmiVar(pAC, IoC, SK_PNMI_SET, Id, (char *)pBuf, pLen,
+ Instance, NetIndex));
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiGetStruct - Retrieves the management database in SK_PNMI_STRUCT_DATA
+ *
+ * Description:
+ * Runs through the IdTable, queries the single OIDs and stores the
+ * returned data into the management database structure
+ * SK_PNMI_STRUCT_DATA. The offset of the OID in the structure
+ * is stored in the IdTable. The return value of the function will also
+ * be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the
+ * minimum size of SK_PNMI_MIN_STRUCT_SIZE.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take
+ * the data.
+ * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist
+ */
+int SkPnmiGetStruct(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+void *pBuf, /* Buffer which will store the retrieved data */
+unsigned int *pLen, /* Length of buffer */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ int Ret;
+ unsigned int TableIndex;
+ unsigned int DstOffset;
+ unsigned int InstanceNo;
+ unsigned int InstanceCnt;
+ SK_U32 Instance;
+ unsigned int TmpLen;
+ char KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE];
+
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: SkPnmiGetStruct: Called, BufLen=%d, NetIndex=%d\n",
+ *pLen, NetIndex));
+
+ if (*pLen < SK_PNMI_STRUCT_SIZE) {
+
+ if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) {
+
+ SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT,
+ (SK_U32)(-1));
+ }
+
+ *pLen = SK_PNMI_STRUCT_SIZE;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ /*
+ * Check NetIndex
+ */
+ if (NetIndex >= pAC->Rlmt.NumNets) {
+ return (SK_PNMI_ERR_UNKNOWN_NET);
+ }
+
+ /* Update statistic */
+ SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On call");
+
+ if ((Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1)) !=
+ SK_PNMI_ERR_OK) {
+
+ SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
+ *pLen = SK_PNMI_MIN_STRUCT_SIZE;
+ return (Ret);
+ }
+
+ if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) {
+
+ SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
+ *pLen = SK_PNMI_MIN_STRUCT_SIZE;
+ return (Ret);
+ }
+
+ if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) {
+
+ SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
+ *pLen = SK_PNMI_MIN_STRUCT_SIZE;
+ return (Ret);
+ }
+
+ /*
+ * Increment semaphores to indicate that an update was
+ * already done
+ */
+ pAC->Pnmi.MacUpdatedFlag ++;
+ pAC->Pnmi.RlmtUpdatedFlag ++;
+ pAC->Pnmi.SirqUpdatedFlag ++;
+
+ /* Get vpd keys for instance calculation */
+ Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), &TmpLen);
+ if (Ret != SK_PNMI_ERR_OK) {
+
+ pAC->Pnmi.MacUpdatedFlag --;
+ pAC->Pnmi.RlmtUpdatedFlag --;
+ pAC->Pnmi.SirqUpdatedFlag --;
+
+ SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return");
+ SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
+ *pLen = SK_PNMI_MIN_STRUCT_SIZE;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ /* Retrieve values */
+ SK_MEMSET((char *)pBuf, 0, SK_PNMI_STRUCT_SIZE);
+ for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) {
+
+ InstanceNo = IdTable[TableIndex].InstanceNo;
+ for (InstanceCnt = 1; InstanceCnt <= InstanceNo;
+ InstanceCnt ++) {
+
+ DstOffset = IdTable[TableIndex].Offset +
+ (InstanceCnt - 1) *
+ IdTable[TableIndex].StructSize;
+
+ /*
+ * For the VPD the instance is not an index number
+ * but the key itself. Determin with the instance
+ * counter the VPD key to be used.
+ */
+ if (IdTable[TableIndex].Id == OID_SKGE_VPD_KEY ||
+ IdTable[TableIndex].Id == OID_SKGE_VPD_VALUE ||
+ IdTable[TableIndex].Id == OID_SKGE_VPD_ACCESS ||
+ IdTable[TableIndex].Id == OID_SKGE_VPD_ACTION) {
+
+ SK_STRNCPY((char *)&Instance, KeyArr[InstanceCnt - 1], 4);
+ }
+ else {
+ Instance = (SK_U32)InstanceCnt;
+ }
+
+ TmpLen = *pLen - DstOffset;
+ Ret = IdTable[TableIndex].Func(pAC, IoC, SK_PNMI_GET,
+ IdTable[TableIndex].Id, (char *)pBuf +
+ DstOffset, &TmpLen, Instance, TableIndex, NetIndex);
+
+ /*
+ * An unknown instance error means that we reached
+ * the last instance of that variable. Proceed with
+ * the next OID in the table and ignore the return
+ * code.
+ */
+ if (Ret == SK_PNMI_ERR_UNKNOWN_INST) {
+
+ break;
+ }
+
+ if (Ret != SK_PNMI_ERR_OK) {
+
+ pAC->Pnmi.MacUpdatedFlag --;
+ pAC->Pnmi.RlmtUpdatedFlag --;
+ pAC->Pnmi.SirqUpdatedFlag --;
+
+ SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return");
+ SK_PNMI_SET_STAT(pBuf, Ret, DstOffset);
+ *pLen = SK_PNMI_MIN_STRUCT_SIZE;
+ return (Ret);
+ }
+ }
+ }
+
+ pAC->Pnmi.MacUpdatedFlag --;
+ pAC->Pnmi.RlmtUpdatedFlag --;
+ pAC->Pnmi.SirqUpdatedFlag --;
+
+ *pLen = SK_PNMI_STRUCT_SIZE;
+ SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return");
+ SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1));
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiPreSetStruct - Presets the management database in SK_PNMI_STRUCT_DATA
+ *
+ * Description:
+ * Calls a general sub-function for all this set stuff. The preset does
+ * the same as a set, but returns just before finally setting the
+ * new value. This is usefull to check if a set might be successfull.
+ * The sub-function runs through the IdTable, checks which OIDs are able
+ * to set, and calls the handler function of the OID to perform the
+ * preset. The return value of the function will also be stored in
+ * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of
+ * SK_PNMI_MIN_STRUCT_SIZE.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid
+ * value range.
+ */
+int SkPnmiPreSetStruct(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+void *pBuf, /* Buffer which contains the data to be set */
+unsigned int *pLen, /* Length of buffer */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: SkPnmiPreSetStruct: Called, BufLen=%d, NetIndex=%d\n",
+ *pLen, NetIndex));
+
+ return (PnmiStruct(pAC, IoC, SK_PNMI_PRESET, (char *)pBuf,
+ pLen, NetIndex));
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiSetStruct - Sets the management database in SK_PNMI_STRUCT_DATA
+ *
+ * Description:
+ * Calls a general sub-function for all this set stuff. The return value
+ * of the function will also be stored in SK_PNMI_STRUCT_DATA if the
+ * passed buffer has the minimum size of SK_PNMI_MIN_STRUCT_SIZE.
+ * The sub-function runs through the IdTable, checks which OIDs are able
+ * to set, and calls the handler function of the OID to perform the
+ * set. The return value of the function will also be stored in
+ * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of
+ * SK_PNMI_MIN_STRUCT_SIZE.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid
+ * value range.
+ */
+int SkPnmiSetStruct(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+void *pBuf, /* Buffer which contains the data to be set */
+unsigned int *pLen, /* Length of buffer */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: SkPnmiSetStruct: Called, BufLen=%d, NetIndex=%d\n",
+ *pLen, NetIndex));
+
+ return (PnmiStruct(pAC, IoC, SK_PNMI_SET, (char *)pBuf,
+ pLen, NetIndex));
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiEvent - Event handler
+ *
+ * Description:
+ * Handles the following events:
+ * SK_PNMI_EVT_SIRQ_OVERFLOW When a hardware counter overflows an
+ * interrupt will be generated which is
+ * first handled by SIRQ which generates a
+ * this event. The event increments the
+ * upper 32 bit of the 64 bit counter.
+ * SK_PNMI_EVT_SEN_XXX The event is generated by the I2C module
+ * when a sensor reports a warning or
+ * error. The event will store a trap
+ * message in the trap buffer.
+ * SK_PNMI_EVT_CHG_EST_TIMER The timer event was initiated by this
+ * module and is used to calculate the
+ * port switches per hour.
+ * SK_PNMI_EVT_CLEAR_COUNTER The event clears all counters and
+ * timestamps.
+ * SK_PNMI_EVT_XMAC_RESET The event is generated by the driver
+ * before a hard reset of the XMAC is
+ * performed. All counters will be saved
+ * and added to the hardware counter
+ * values after reset to grant continuous
+ * counter values.
+ * SK_PNMI_EVT_RLMT_PORT_UP Generated by RLMT to notify that a port
+ * went logically up. A trap message will
+ * be stored to the trap buffer.
+ * SK_PNMI_EVT_RLMT_PORT_DOWN Generated by RLMT to notify that a port
+ * went logically down. A trap message will
+ * be stored to the trap buffer.
+ * SK_PNMI_EVT_RLMT_SEGMENTATION Generated by RLMT to notify that two
+ * spanning tree root bridges were
+ * detected. A trap message will be stored
+ * to the trap buffer.
+ * SK_PNMI_EVT_RLMT_ACTIVE_DOWN Notifies PNMI that an active port went
+ * down. PNMI will not further add the
+ * statistic values to the virtual port.
+ * SK_PNMI_EVT_RLMT_ACTIVE_UP Notifies PNMI that a port went up and
+ * is now an active port. PNMI will now
+ * add the statistic data of this port to
+ * the virtual port.
+ * SK_PNMI_EVT_RLMT_SET_NETS Notifies PNMI about the net mode. The first Parameter
+ * contains the number of nets. 1 means single net, 2 means
+ * dual net. The second Parameter is -1
+ *
+ * Returns:
+ * Always 0
+ */
+int SkPnmiEvent(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+SK_U32 Event, /* Event-Id */
+SK_EVPARA Param) /* Event dependent parameter */
+{
+ unsigned int PhysPortIndex;
+ unsigned int MaxNetNumber;
+ int CounterIndex;
+ int Ret;
+ SK_U16 MacStatus;
+ SK_U64 OverflowStatus;
+ SK_U64 Mask;
+ int MacType;
+ SK_U64 Value;
+ SK_U32 Val32;
+ SK_U16 Register;
+ SK_EVPARA EventParam;
+ SK_U64 NewestValue;
+ SK_U64 OldestValue;
+ SK_U64 Delta;
+ SK_PNMI_ESTIMATE *pEst;
+ SK_U32 NetIndex;
+ SK_GEPORT *pPrt;
+ SK_PNMI_VCT *pVctBackupData;
+ SK_U32 RetCode;
+ int i;
+ SK_U32 CableLength;
+
+
+#ifdef DEBUG
+ if (Event != SK_PNMI_EVT_XMAC_RESET) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: SkPnmiEvent: Called, Event=0x%x, Param=0x%x\n",
+ (unsigned int)Event, (unsigned int)Param.Para64));
+ }
+#endif
+ SK_PNMI_CHECKFLAGS("SkPnmiEvent: On call");
+
+ MacType = pAC->GIni.GIMacType;
+
+ switch (Event) {
+
+ case SK_PNMI_EVT_SIRQ_OVERFLOW:
+ PhysPortIndex = (int)Param.Para32[0];
+ MacStatus = (SK_U16)Param.Para32[1];
+#ifdef DEBUG
+ if (PhysPortIndex >= SK_MAX_MACS) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SIRQ_OVERFLOW parameter"
+ " wrong, PhysPortIndex=0x%x\n",
+ PhysPortIndex));
+ return (0);
+ }
+#endif
+ OverflowStatus = 0;
+
+ /*
+ * Check which source caused an overflow interrupt.
+ */
+ if ((pAC->GIni.GIFunc.pFnMacOverflow(
+ pAC, IoC, PhysPortIndex, MacStatus, &OverflowStatus) != 0) ||
+ (OverflowStatus == 0)) {
+
+ SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
+ return (0);
+ }
+
+ /*
+ * Check the overflow status register and increment
+ * the upper dword of corresponding counter.
+ */
+ for (CounterIndex = 0; CounterIndex < sizeof(Mask) * 8;
+ CounterIndex ++) {
+
+ Mask = (SK_U64)1 << CounterIndex;
+ if ((OverflowStatus & Mask) == 0) {
+
+ continue;
+ }
+
+ switch (StatOvrflwBit[CounterIndex][MacType]) {
+
+ case SK_PNMI_HTX_UTILUNDER:
+ case SK_PNMI_HTX_UTILOVER:
+ XM_IN16(IoC, PhysPortIndex, XM_TX_CMD,
+ &Register);
+ Register |= XM_TX_SAM_LINE;
+ XM_OUT16(IoC, PhysPortIndex, XM_TX_CMD,
+ Register);
+ break;
+
+ case SK_PNMI_HRX_UTILUNDER:
+ case SK_PNMI_HRX_UTILOVER:
+ XM_IN16(IoC, PhysPortIndex, XM_RX_CMD,
+ &Register);
+ Register |= XM_RX_SAM_LINE;
+ XM_OUT16(IoC, PhysPortIndex, XM_RX_CMD,
+ Register);
+ break;
+
+ case SK_PNMI_HTX_OCTETHIGH:
+ case SK_PNMI_HTX_OCTETLOW:
+ case SK_PNMI_HTX_RESERVED:
+ case SK_PNMI_HRX_OCTETHIGH:
+ case SK_PNMI_HRX_OCTETLOW:
+ case SK_PNMI_HRX_IRLENGTH:
+ case SK_PNMI_HRX_RESERVED:
+
+ /*
+ * the following counters aren't be handled (id > 63)
+ */
+ case SK_PNMI_HTX_SYNC:
+ case SK_PNMI_HTX_SYNC_OCTET:
+ break;
+
+ case SK_PNMI_HRX_LONGFRAMES:
+ if (MacType == SK_MAC_GMAC) {
+ pAC->Pnmi.Port[PhysPortIndex].
+ CounterHigh[CounterIndex] ++;
+ }
+ break;
+
+ default:
+ pAC->Pnmi.Port[PhysPortIndex].
+ CounterHigh[CounterIndex] ++;
+ }
+ }
+ break;
+
+ case SK_PNMI_EVT_SEN_WAR_LOW:
+#ifdef DEBUG
+ if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_LOW parameter wrong, SensorIndex=%d\n",
+ (unsigned int)Param.Para64));
+ return (0);
+ }
+#endif
+ /*
+ * Store a trap message in the trap buffer and generate
+ * an event for user space applications with the
+ * SK_DRIVER_SENDEVENT macro.
+ */
+ QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_LOW,
+ (unsigned int)Param.Para64);
+ (void)SK_DRIVER_SENDEVENT(pAC, IoC);
+ break;
+
+ case SK_PNMI_EVT_SEN_WAR_UPP:
+#ifdef DEBUG
+ if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR:SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_UPP parameter wrong, SensorIndex=%d\n",
+ (unsigned int)Param.Para64));
+ return (0);
+ }
+#endif
+ /*
+ * Store a trap message in the trap buffer and generate
+ * an event for user space applications with the
+ * SK_DRIVER_SENDEVENT macro.
+ */
+ QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_UPP,
+ (unsigned int)Param.Para64);
+ (void)SK_DRIVER_SENDEVENT(pAC, IoC);
+ break;
+
+ case SK_PNMI_EVT_SEN_ERR_LOW:
+#ifdef DEBUG
+ if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_LOW parameter wrong, SensorIndex=%d\n",
+ (unsigned int)Param.Para64));
+ return (0);
+ }
+#endif
+ /*
+ * Store a trap message in the trap buffer and generate
+ * an event for user space applications with the
+ * SK_DRIVER_SENDEVENT macro.
+ */
+ QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_LOW,
+ (unsigned int)Param.Para64);
+ (void)SK_DRIVER_SENDEVENT(pAC, IoC);
+ break;
+
+ case SK_PNMI_EVT_SEN_ERR_UPP:
+#ifdef DEBUG
+ if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_UPP parameter wrong, SensorIndex=%d\n",
+ (unsigned int)Param.Para64));
+ return (0);
+ }
+#endif
+ /*
+ * Store a trap message in the trap buffer and generate
+ * an event for user space applications with the
+ * SK_DRIVER_SENDEVENT macro.
+ */
+ QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_UPP,
+ (unsigned int)Param.Para64);
+ (void)SK_DRIVER_SENDEVENT(pAC, IoC);
+ break;
+
+ case SK_PNMI_EVT_CHG_EST_TIMER:
+ /*
+ * Calculate port switch average on a per hour basis
+ * Time interval for check : 28125 ms
+ * Number of values for average : 8
+ *
+ * Be careful in changing these values, on change check
+ * - typedef of SK_PNMI_ESTIMATE (Size of EstValue
+ * array one less than value number)
+ * - Timer initilization SkTimerStart() in SkPnmiInit
+ * - Delta value below must be multiplicated with
+ * power of 2
+ *
+ */
+ pEst = &pAC->Pnmi.RlmtChangeEstimate;
+ CounterIndex = pEst->EstValueIndex + 1;
+ if (CounterIndex == 7) {
+
+ CounterIndex = 0;
+ }
+ pEst->EstValueIndex = CounterIndex;
+
+ NewestValue = pAC->Pnmi.RlmtChangeCts;
+ OldestValue = pEst->EstValue[CounterIndex];
+ pEst->EstValue[CounterIndex] = NewestValue;
+
+ /*
+ * Calculate average. Delta stores the number of
+ * port switches per 28125 * 8 = 225000 ms
+ */
+ if (NewestValue >= OldestValue) {
+
+ Delta = NewestValue - OldestValue;
+ }
+ else {
+ /* Overflow situation */
+ Delta = (SK_U64)(0 - OldestValue) + NewestValue;
+ }
+
+ /*
+ * Extrapolate delta to port switches per hour.
+ * Estimate = Delta * (3600000 / 225000)
+ * = Delta * 16
+ * = Delta << 4
+ */
+ pAC->Pnmi.RlmtChangeEstimate.Estimate = Delta << 4;
+
+ /*
+ * Check if threshold is exceeded. If the threshold is
+ * permanently exceeded every 28125 ms an event will be
+ * generated to remind the user of this condition.
+ */
+ if ((pAC->Pnmi.RlmtChangeThreshold != 0) &&
+ (pAC->Pnmi.RlmtChangeEstimate.Estimate >=
+ pAC->Pnmi.RlmtChangeThreshold)) {
+
+ QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_CHANGE_THRES);
+ (void)SK_DRIVER_SENDEVENT(pAC, IoC);
+ }
+
+ SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam));
+ SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer,
+ 28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER,
+ EventParam);
+ break;
+
+ case SK_PNMI_EVT_CLEAR_COUNTER:
+ /*
+ * Param.Para32[0] contains the NetIndex (0 ..1).
+ * Param.Para32[1] is reserved, contains -1.
+ */
+ NetIndex = (SK_U32)Param.Para32[0];
+
+#ifdef DEBUG
+ if (NetIndex >= pAC->Rlmt.NumNets) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_CLEAR_COUNTER parameter wrong, NetIndex=%d\n",
+ NetIndex));
+
+ return (0);
+ }
+#endif
+
+ /*
+ * Set all counters and timestamps to zero
+ */
+ ResetCounter(pAC, IoC, NetIndex); /* the according NetIndex is required
+ as a Parameter of the Event */
+ break;
+
+ case SK_PNMI_EVT_XMAC_RESET:
+ /*
+ * To grant continuous counter values store the current
+ * XMAC statistic values to the entries 1..n of the
+ * CounterOffset array. XMAC Errata #2
+ */
+#ifdef DEBUG
+ if ((unsigned int)Param.Para64 >= SK_MAX_MACS) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_XMAC_RESET parameter wrong, PhysPortIndex=%d\n",
+ (unsigned int)Param.Para64));
+ return (0);
+ }
+#endif
+ PhysPortIndex = (unsigned int)Param.Para64;
+
+ /*
+ * Update XMAC statistic to get fresh values
+ */
+ Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1);
+ if (Ret != SK_PNMI_ERR_OK) {
+
+ SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
+ return (0);
+ }
+ /*
+ * Increment semaphore to indicate that an update was
+ * already done
+ */
+ pAC->Pnmi.MacUpdatedFlag ++;
+
+ for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX;
+ CounterIndex ++) {
+
+ if (!StatAddr[CounterIndex][MacType].GetOffset) {
+
+ continue;
+ }
+
+ pAC->Pnmi.Port[PhysPortIndex].
+ CounterOffset[CounterIndex] = GetPhysStatVal(
+ pAC, IoC, PhysPortIndex, CounterIndex);
+ pAC->Pnmi.Port[PhysPortIndex].
+ CounterHigh[CounterIndex] = 0;
+ }
+
+ pAC->Pnmi.MacUpdatedFlag --;
+ break;
+
+ case SK_PNMI_EVT_RLMT_PORT_UP:
+ PhysPortIndex = (unsigned int)Param.Para32[0];
+#ifdef DEBUG
+ if (PhysPortIndex >= SK_MAX_MACS) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_UP parameter"
+ " wrong, PhysPortIndex=%d\n", PhysPortIndex));
+
+ return (0);
+ }
+#endif
+ /*
+ * Store a trap message in the trap buffer and generate an event for
+ * user space applications with the SK_DRIVER_SENDEVENT macro.
+ */
+ QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_UP, PhysPortIndex);
+ (void)SK_DRIVER_SENDEVENT(pAC, IoC);
+
+ /* Bugfix for XMAC errata (#10620)*/
+ if (pAC->GIni.GIMacType == SK_MAC_XMAC){
+
+ /* Add incremental difference to offset (#10620)*/
+ (void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ XM_RXE_SHT_ERR, &Val32);
+
+ Value = (((SK_U64)pAC->Pnmi.Port[PhysPortIndex].
+ CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32);
+ pAC->Pnmi.Port[PhysPortIndex].CounterOffset[SK_PNMI_HRX_SHORTS] +=
+ Value - pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark;
+ }
+
+ /* Tell VctStatus() that a link was up meanwhile. */
+ pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_LINK;
+ break;
+
+ case SK_PNMI_EVT_RLMT_PORT_DOWN:
+ PhysPortIndex = (unsigned int)Param.Para32[0];
+
+#ifdef DEBUG
+ if (PhysPortIndex >= SK_MAX_MACS) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_DOWN parameter"
+ " wrong, PhysPortIndex=%d\n", PhysPortIndex));
+
+ return (0);
+ }
+#endif
+ /*
+ * Store a trap message in the trap buffer and generate an event for
+ * user space applications with the SK_DRIVER_SENDEVENT macro.
+ */
+ QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_DOWN, PhysPortIndex);
+ (void)SK_DRIVER_SENDEVENT(pAC, IoC);
+
+ /* Bugfix #10620 - get zero level for incremental difference */
+ if ((pAC->GIni.GIMacType == SK_MAC_XMAC)) {
+
+ (void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ XM_RXE_SHT_ERR, &Val32);
+ pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark =
+ (((SK_U64)pAC->Pnmi.Port[PhysPortIndex].
+ CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32);
+ }
+ break;
+
+ case SK_PNMI_EVT_RLMT_ACTIVE_DOWN:
+ PhysPortIndex = (unsigned int)Param.Para32[0];
+ NetIndex = (SK_U32)Param.Para32[1];
+
+#ifdef DEBUG
+ if (PhysPortIndex >= SK_MAX_MACS) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, PhysPort=%d\n",
+ PhysPortIndex));
+ }
+
+ if (NetIndex >= pAC->Rlmt.NumNets) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, NetIndex=%d\n",
+ NetIndex));
+ }
+#endif
+ /*
+ * For now, ignore event if NetIndex != 0.
+ */
+ if (Param.Para32[1] != 0) {
+
+ return (0);
+ }
+
+ /*
+ * Nothing to do if port is already inactive
+ */
+ if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+ return (0);
+ }
+
+ /*
+ * Update statistic counters to calculate new offset for the virtual
+ * port and increment semaphore to indicate that an update was already
+ * done.
+ */
+ if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) !=
+ SK_PNMI_ERR_OK) {
+
+ SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
+ return (0);
+ }
+ pAC->Pnmi.MacUpdatedFlag ++;
+
+ /*
+ * Calculate new counter offset for virtual port to grant continous
+ * counting on port switches. The virtual port consists of all currently
+ * active ports. The port down event indicates that a port is removed
+ * from the virtual port. Therefore add the counter value of the removed
+ * port to the CounterOffset for the virtual port to grant the same
+ * counter value.
+ */
+ for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX;
+ CounterIndex ++) {
+
+ if (!StatAddr[CounterIndex][MacType].GetOffset) {
+
+ continue;
+ }
+
+ Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex);
+
+ pAC->Pnmi.VirtualCounterOffset[CounterIndex] += Value;
+ }
+
+ /*
+ * Set port to inactive
+ */
+ pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_FALSE;
+
+ pAC->Pnmi.MacUpdatedFlag --;
+ break;
+
+ case SK_PNMI_EVT_RLMT_ACTIVE_UP:
+ PhysPortIndex = (unsigned int)Param.Para32[0];
+ NetIndex = (SK_U32)Param.Para32[1];
+
+#ifdef DEBUG
+ if (PhysPortIndex >= SK_MAX_MACS) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, PhysPort=%d\n",
+ PhysPortIndex));
+ }
+
+ if (NetIndex >= pAC->Rlmt.NumNets) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+ ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, NetIndex=%d\n",
+ NetIndex));
+ }
+#endif
+ /*
+ * For now, ignore event if NetIndex != 0.
+ */
+ if (Param.Para32[1] != 0) {
+
+ return (0);
+ }
+
+ /*
+ * Nothing to do if port is already active
+ */
+ if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+ return (0);
+ }
+
+ /*
+ * Statistic maintenance
+ */
+ pAC->Pnmi.RlmtChangeCts ++;
+ pAC->Pnmi.RlmtChangeTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC));
+
+ /*
+ * Store a trap message in the trap buffer and generate an event for
+ * user space applications with the SK_DRIVER_SENDEVENT macro.
+ */
+ QueueRlmtNewMacTrap(pAC, PhysPortIndex);
+ (void)SK_DRIVER_SENDEVENT(pAC, IoC);
+
+ /*
+ * Update statistic counters to calculate new offset for the virtual
+ * port and increment semaphore to indicate that an update was
+ * already done.
+ */
+ if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) !=
+ SK_PNMI_ERR_OK) {
+
+ SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
+ return (0);
+ }
+ pAC->Pnmi.MacUpdatedFlag ++;
+
+ /*
+ * Calculate new counter offset for virtual port to grant continous
+ * counting on port switches. A new port is added to the virtual port.
+ * Therefore substract the counter value of the new port from the
+ * CounterOffset for the virtual port to grant the same value.
+ */
+ for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX;
+ CounterIndex ++) {
+
+ if (!StatAddr[CounterIndex][MacType].GetOffset) {
+
+ continue;
+ }
+
+ Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex);
+
+ pAC->Pnmi.VirtualCounterOffset[CounterIndex] -= Value;
+ }
+
+ /*
+ * Set port to active
+ */
+ pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_TRUE;
+
+ pAC->Pnmi.MacUpdatedFlag --;
+ break;
+
+ case SK_PNMI_EVT_RLMT_SEGMENTATION:
+ /*
+ * Para.Para32[0] contains the NetIndex.
+ */
+
+ /*
+ * Store a trap message in the trap buffer and generate an event for
+ * user space applications with the SK_DRIVER_SENDEVENT macro.
+ */
+ QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_SEGMENTATION);
+ (void)SK_DRIVER_SENDEVENT(pAC, IoC);
+ break;
+
+ case SK_PNMI_EVT_RLMT_SET_NETS:
+ /*
+ * Param.Para32[0] contains the number of Nets.
+ * Param.Para32[1] is reserved, contains -1.
+ */
+ /*
+ * Check number of nets
+ */
+ MaxNetNumber = pAC->GIni.GIMacsFound;
+ if (((unsigned int)Param.Para32[0] < 1)
+ || ((unsigned int)Param.Para32[0] > MaxNetNumber)) {
+ return (SK_PNMI_ERR_UNKNOWN_NET);
+ }
+
+ if ((unsigned int)Param.Para32[0] == 1) { /* single net mode */
+ pAC->Pnmi.DualNetActiveFlag = SK_FALSE;
+ }
+ else { /* dual net mode */
+ pAC->Pnmi.DualNetActiveFlag = SK_TRUE;
+ }
+ break;
+
+ case SK_PNMI_EVT_VCT_RESET:
+ PhysPortIndex = Param.Para32[0];
+ pPrt = &pAC->GIni.GP[PhysPortIndex];
+ pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex];
+
+ if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) {
+ RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE);
+ if (RetCode == 2) {
+ /*
+ * VCT test is still running.
+ * Start VCT timer counter again.
+ */
+ SK_MEMSET((char *) &Param, 0, sizeof(Param));
+ Param.Para32[0] = PhysPortIndex;
+ Param.Para32[1] = -1;
+ SkTimerStart(pAC, IoC, &pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer,
+ 4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Param);
+ break;
+ }
+ pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING;
+ pAC->Pnmi.VctStatus[PhysPortIndex] |=
+ (SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE);
+
+ /* Copy results for later use to PNMI struct. */
+ for (i = 0; i < 4; i++) {
+ if (pPrt->PMdiPairLen[i] > 35) {
+ CableLength = 1000 * (((175 * pPrt->PMdiPairLen[i]) / 210) - 28);
+ }
+ else {
+ CableLength = 0;
+ }
+ pVctBackupData->PMdiPairLen[i] = CableLength;
+ pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i];
+ }
+
+ Param.Para32[0] = PhysPortIndex;
+ Param.Para32[1] = -1;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Param);
+ SkEventDispatcher(pAC, IoC);
+ }
+
+ break;
+
+ default:
+ break;
+ }
+
+ SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
+ return (0);
+}
+
+
+/******************************************************************************
+ *
+ * Private functions
+ *
+ */
+
+/*****************************************************************************
+ *
+ * PnmiVar - Gets, presets, and sets single OIDs
+ *
+ * Description:
+ * Looks up the requested OID, calls the corresponding handler
+ * function, and passes the parameters with the get, preset, or
+ * set command. The function is called by SkGePnmiGetVar,
+ * SkGePnmiPreSetVar, or SkGePnmiSetVar.
+ *
+ * Returns:
+ * SK_PNMI_ERR_XXX. For details have a look to the description of the
+ * calling functions.
+ * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist
+ */
+PNMI_STATIC int PnmiVar(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer which stores the mgmt data to be set */
+unsigned int *pLen, /* Total length of mgmt data */
+SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ unsigned int TableIndex;
+ int Ret;
+
+
+ if ((TableIndex = LookupId(Id)) == (unsigned int)(-1)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_OID);
+ }
+
+ /*
+ * Check NetIndex
+ */
+ if (NetIndex >= pAC->Rlmt.NumNets) {
+ return (SK_PNMI_ERR_UNKNOWN_NET);
+ }
+
+ SK_PNMI_CHECKFLAGS("PnmiVar: On call");
+
+ Ret = IdTable[TableIndex].Func(pAC, IoC, Action, Id, pBuf, pLen,
+ Instance, TableIndex, NetIndex);
+
+ SK_PNMI_CHECKFLAGS("PnmiVar: On return");
+
+ return (Ret);
+}
+
+/*****************************************************************************
+ *
+ * PnmiStruct - Presets and Sets data in structure SK_PNMI_STRUCT_DATA
+ *
+ * Description:
+ * The return value of the function will also be stored in
+ * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of
+ * SK_PNMI_MIN_STRUCT_SIZE. The sub-function runs through the IdTable,
+ * checks which OIDs are able to set, and calls the handler function of
+ * the OID to perform the set. The return value of the function will
+ * also be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the
+ * minimum size of SK_PNMI_MIN_STRUCT_SIZE. The function is called
+ * by SkGePnmiPreSetStruct and SkGePnmiSetStruct.
+ *
+ * Returns:
+ * SK_PNMI_ERR_XXX. The codes are described in the calling functions.
+ * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist
+ */
+PNMI_STATIC int PnmiStruct(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Set action to be performed */
+char *pBuf, /* Buffer which contains the data to be set */
+unsigned int *pLen, /* Length of buffer */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ int Ret;
+ unsigned int TableIndex;
+ unsigned int DstOffset;
+ unsigned int Len;
+ unsigned int InstanceNo;
+ unsigned int InstanceCnt;
+ SK_U32 Instance;
+ SK_U32 Id;
+
+
+ /* Check if the passed buffer has the right size */
+ if (*pLen < SK_PNMI_STRUCT_SIZE) {
+
+ /* Check if we can return the error within the buffer */
+ if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) {
+
+ SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT,
+ (SK_U32)(-1));
+ }
+
+ *pLen = SK_PNMI_STRUCT_SIZE;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ /*
+ * Check NetIndex
+ */
+ if (NetIndex >= pAC->Rlmt.NumNets) {
+ return (SK_PNMI_ERR_UNKNOWN_NET);
+ }
+
+ SK_PNMI_CHECKFLAGS("PnmiStruct: On call");
+
+ /*
+ * Update the values of RLMT and SIRQ and increment semaphores to
+ * indicate that an update was already done.
+ */
+ if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) {
+
+ SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
+ *pLen = SK_PNMI_MIN_STRUCT_SIZE;
+ return (Ret);
+ }
+
+ if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) {
+
+ SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
+ *pLen = SK_PNMI_MIN_STRUCT_SIZE;
+ return (Ret);
+ }
+
+ pAC->Pnmi.RlmtUpdatedFlag ++;
+ pAC->Pnmi.SirqUpdatedFlag ++;
+
+ /* Preset/Set values */
+ for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) {
+
+ if ((IdTable[TableIndex].Access != SK_PNMI_RW) &&
+ (IdTable[TableIndex].Access != SK_PNMI_WO)) {
+
+ continue;
+ }
+
+ InstanceNo = IdTable[TableIndex].InstanceNo;
+ Id = IdTable[TableIndex].Id;
+
+ for (InstanceCnt = 1; InstanceCnt <= InstanceNo;
+ InstanceCnt ++) {
+
+ DstOffset = IdTable[TableIndex].Offset +
+ (InstanceCnt - 1) *
+ IdTable[TableIndex].StructSize;
+
+ /*
+ * Because VPD multiple instance variables are
+ * not setable we do not need to evaluate VPD
+ * instances. Have a look to VPD instance
+ * calculation in SkPnmiGetStruct().
+ */
+ Instance = (SK_U32)InstanceCnt;
+
+ /*
+ * Evaluate needed buffer length
+ */
+ Len = 0;
+ Ret = IdTable[TableIndex].Func(pAC, IoC,
+ SK_PNMI_GET, IdTable[TableIndex].Id,
+ NULL, &Len, Instance, TableIndex, NetIndex);
+
+ if (Ret == SK_PNMI_ERR_UNKNOWN_INST) {
+
+ break;
+ }
+ if (Ret != SK_PNMI_ERR_TOO_SHORT) {
+
+ pAC->Pnmi.RlmtUpdatedFlag --;
+ pAC->Pnmi.SirqUpdatedFlag --;
+
+ SK_PNMI_CHECKFLAGS("PnmiStruct: On return");
+ SK_PNMI_SET_STAT(pBuf,
+ SK_PNMI_ERR_GENERAL, DstOffset);
+ *pLen = SK_PNMI_MIN_STRUCT_SIZE;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ if (Id == OID_SKGE_VPD_ACTION) {
+
+ switch (*(pBuf + DstOffset)) {
+
+ case SK_PNMI_VPD_CREATE:
+ Len = 3 + *(pBuf + DstOffset + 3);
+ break;
+
+ case SK_PNMI_VPD_DELETE:
+ Len = 3;
+ break;
+
+ default:
+ Len = 1;
+ break;
+ }
+ }
+
+ /* Call the OID handler function */
+ Ret = IdTable[TableIndex].Func(pAC, IoC, Action,
+ IdTable[TableIndex].Id, pBuf + DstOffset,
+ &Len, Instance, TableIndex, NetIndex);
+
+ if (Ret != SK_PNMI_ERR_OK) {
+
+ pAC->Pnmi.RlmtUpdatedFlag --;
+ pAC->Pnmi.SirqUpdatedFlag --;
+
+ SK_PNMI_CHECKFLAGS("PnmiStruct: On return");
+ SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_BAD_VALUE,
+ DstOffset);
+ *pLen = SK_PNMI_MIN_STRUCT_SIZE;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+ }
+ }
+
+ pAC->Pnmi.RlmtUpdatedFlag --;
+ pAC->Pnmi.SirqUpdatedFlag --;
+
+ SK_PNMI_CHECKFLAGS("PnmiStruct: On return");
+ SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1));
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * LookupId - Lookup an OID in the IdTable
+ *
+ * Description:
+ * Scans the IdTable to find the table entry of an OID.
+ *
+ * Returns:
+ * The table index or -1 if not found.
+ */
+PNMI_STATIC int LookupId(
+SK_U32 Id) /* Object identifier to be searched */
+{
+ int i;
+
+ for (i = 0; i < ID_TABLE_SIZE; i++) {
+
+ if (IdTable[i].Id == Id) {
+
+ return i;
+ }
+ }
+
+ return (-1);
+}
+
+/*****************************************************************************
+ *
+ * OidStruct - Handler of OID_SKGE_ALL_DATA
+ *
+ * Description:
+ * This OID performs a Get/Preset/SetStruct call and returns all data
+ * in a SK_PNMI_STRUCT_DATA structure.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid
+ * value range.
+ * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set.
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int OidStruct(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ if (Id != OID_SKGE_ALL_DATA) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR003,
+ SK_PNMI_ERR003MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ /*
+ * Check instance. We only handle single instance variables
+ */
+ if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+
+ switch (Action) {
+
+ case SK_PNMI_GET:
+ return (SkPnmiGetStruct(pAC, IoC, pBuf, pLen, NetIndex));
+
+ case SK_PNMI_PRESET:
+ return (SkPnmiPreSetStruct(pAC, IoC, pBuf, pLen, NetIndex));
+
+ case SK_PNMI_SET:
+ return (SkPnmiSetStruct(pAC, IoC, pBuf, pLen, NetIndex));
+ }
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR004, SK_PNMI_ERR004MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+}
+
+/*****************************************************************************
+ *
+ * Perform - OID handler of OID_SKGE_ACTION
+ *
+ * Description:
+ * None.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid
+ * value range.
+ * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set.
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int Perform(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ int Ret;
+ SK_U32 ActionOp;
+
+
+ /*
+ * Check instance. We only handle single instance variables
+ */
+ if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+
+ if (*pLen < sizeof(SK_U32)) {
+
+ *pLen = sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ /* Check if a get should be performed */
+ if (Action == SK_PNMI_GET) {
+
+ /* A get is easy. We always return the same value */
+ ActionOp = (SK_U32)SK_PNMI_ACT_IDLE;
+ SK_PNMI_STORE_U32(pBuf, ActionOp);
+ *pLen = sizeof(SK_U32);
+
+ return (SK_PNMI_ERR_OK);
+ }
+
+ /* Continue with PRESET/SET action */
+ if (*pLen > sizeof(SK_U32)) {
+
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+
+ /* Check if the command is a known one */
+ SK_PNMI_READ_U32(pBuf, ActionOp);
+ if (*pLen > sizeof(SK_U32) ||
+ (ActionOp != SK_PNMI_ACT_IDLE &&
+ ActionOp != SK_PNMI_ACT_RESET &&
+ ActionOp != SK_PNMI_ACT_SELFTEST &&
+ ActionOp != SK_PNMI_ACT_RESETCNT)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+
+ /* A preset ends here */
+ if (Action == SK_PNMI_PRESET) {
+
+ return (SK_PNMI_ERR_OK);
+ }
+
+ switch (ActionOp) {
+
+ case SK_PNMI_ACT_IDLE:
+ /* Nothing to do */
+ break;
+
+ case SK_PNMI_ACT_RESET:
+ /*
+ * Perform a driver reset or something that comes near
+ * to this.
+ */
+ Ret = SK_DRIVER_RESET(pAC, IoC);
+ if (Ret != 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR005,
+ SK_PNMI_ERR005MSG);
+
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ break;
+
+ case SK_PNMI_ACT_SELFTEST:
+ /*
+ * Perform a driver selftest or something similar to this.
+ * Currently this feature is not used and will probably
+ * implemented in another way.
+ */
+ Ret = SK_DRIVER_SELFTEST(pAC, IoC);
+ pAC->Pnmi.TestResult = Ret;
+ break;
+
+ case SK_PNMI_ACT_RESETCNT:
+ /* Set all counters and timestamps to zero */
+ ResetCounter(pAC, IoC, NetIndex);
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR006,
+ SK_PNMI_ERR006MSG);
+
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * Mac8023Stat - OID handler of OID_GEN_XXX and OID_802_3_XXX
+ *
+ * Description:
+ * Retrieves the statistic values of the virtual port (logical
+ * index 0). Only special OIDs of NDIS are handled which consist
+ * of a 32 bit instead of a 64 bit value. The OIDs are public
+ * because perhaps some other platform can use them too.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int Mac8023Stat(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ int Ret;
+ SK_U64 StatVal;
+ SK_U32 StatVal32;
+ SK_BOOL Is64BitReq = SK_FALSE;
+
+ /*
+ * Only the active Mac is returned
+ */
+ if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+
+ /*
+ * Check action type
+ */
+ if (Action != SK_PNMI_GET) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_READ_ONLY);
+ }
+
+ /*
+ * Check length
+ */
+ switch (Id) {
+
+ case OID_802_3_PERMANENT_ADDRESS:
+ case OID_802_3_CURRENT_ADDRESS:
+ if (*pLen < sizeof(SK_MAC_ADDR)) {
+
+ *pLen = sizeof(SK_MAC_ADDR);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ default:
+#ifndef SK_NDIS_64BIT_CTR
+ if (*pLen < sizeof(SK_U32)) {
+ *pLen = sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+#else /* SK_NDIS_64BIT_CTR */
+
+ /*
+ * for compatibility, at least 32bit are required for oid
+ */
+ if (*pLen < sizeof(SK_U32)) {
+ /*
+ * but indicate handling for 64bit values,
+ * if insufficient space is provided
+ */
+ *pLen = sizeof(SK_U64);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE;
+#endif /* SK_NDIS_64BIT_CTR */
+ break;
+ }
+
+ /*
+ * Update all statistics, because we retrieve virtual MAC, which
+ * consists of multiple physical statistics and increment semaphore
+ * to indicate that an update was already done.
+ */
+ Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1);
+ if ( Ret != SK_PNMI_ERR_OK) {
+
+ *pLen = 0;
+ return (Ret);
+ }
+ pAC->Pnmi.MacUpdatedFlag ++;
+
+ /*
+ * Get value (MAC Index 0 identifies the virtual MAC)
+ */
+ switch (Id) {
+
+ case OID_802_3_PERMANENT_ADDRESS:
+ CopyMac(pBuf, &pAC->Addr.Net[NetIndex].PermanentMacAddress);
+ *pLen = sizeof(SK_MAC_ADDR);
+ break;
+
+ case OID_802_3_CURRENT_ADDRESS:
+ CopyMac(pBuf, &pAC->Addr.Net[NetIndex].CurrentMacAddress);
+ *pLen = sizeof(SK_MAC_ADDR);
+ break;
+
+ default:
+ StatVal = GetStatVal(pAC, IoC, 0, IdTable[TableIndex].Param, NetIndex);
+
+ /*
+ * by default 32bit values are evaluated
+ */
+ if (!Is64BitReq) {
+ StatVal32 = (SK_U32)StatVal;
+ SK_PNMI_STORE_U32(pBuf, StatVal32);
+ *pLen = sizeof(SK_U32);
+ }
+ else {
+ SK_PNMI_STORE_U64(pBuf, StatVal);
+ *pLen = sizeof(SK_U64);
+ }
+ break;
+ }
+
+ pAC->Pnmi.MacUpdatedFlag --;
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * MacPrivateStat - OID handler function of OID_SKGE_STAT_XXX
+ *
+ * Description:
+ * Retrieves the XMAC statistic data.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int MacPrivateStat(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ unsigned int LogPortMax;
+ unsigned int LogPortIndex;
+ unsigned int PhysPortMax;
+ unsigned int Limit;
+ unsigned int Offset;
+ int Ret;
+ SK_U64 StatVal;
+
+
+ /*
+ * Calculate instance if wished. MAC index 0 is the virtual
+ * MAC.
+ */
+ PhysPortMax = pAC->GIni.GIMacsFound;
+ LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax);
+
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */
+ LogPortMax--;
+ }
+
+ if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */
+ /* Check instance range */
+ if ((Instance < 1) || (Instance > LogPortMax)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+ LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance);
+ Limit = LogPortIndex + 1;
+ }
+
+ else { /* Instance == (SK_U32)(-1), get all Instances of that OID */
+
+ LogPortIndex = 0;
+ Limit = LogPortMax;
+ }
+
+
+ /*
+ * Check action
+ */
+ if (Action != SK_PNMI_GET) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_READ_ONLY);
+ }
+
+ /*
+ * Check length
+ */
+ if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U64)) {
+
+ *pLen = (Limit - LogPortIndex) * sizeof(SK_U64);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ /*
+ * Update XMAC statistic and increment semaphore to indicate that
+ * an update was already done.
+ */
+ Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1);
+ if (Ret != SK_PNMI_ERR_OK) {
+
+ *pLen = 0;
+ return (Ret);
+ }
+ pAC->Pnmi.MacUpdatedFlag ++;
+
+ /*
+ * Get value
+ */
+ Offset = 0;
+ for (; LogPortIndex < Limit; LogPortIndex ++) {
+
+ switch (Id) {
+
+/* XXX not yet implemented due to XMAC problems
+ case OID_SKGE_STAT_TX_UTIL:
+ return (SK_PNMI_ERR_GENERAL);
+*/
+/* XXX not yet implemented due to XMAC problems
+ case OID_SKGE_STAT_RX_UTIL:
+ return (SK_PNMI_ERR_GENERAL);
+*/
+ case OID_SKGE_STAT_RX:
+ case OID_SKGE_STAT_TX:
+ switch (pAC->GIni.GIMacType) {
+ case SK_MAC_XMAC:
+ StatVal = GetStatVal(pAC, IoC, LogPortIndex,
+ IdTable[TableIndex].Param, NetIndex);
+ break;
+
+ case SK_MAC_GMAC:
+ if (Id == OID_SKGE_STAT_TX) {
+
+ StatVal =
+ GetStatVal(pAC, IoC, LogPortIndex,
+ SK_PNMI_HTX_BROADCAST, NetIndex) +
+ GetStatVal(pAC, IoC, LogPortIndex,
+ SK_PNMI_HTX_MULTICAST, NetIndex) +
+ GetStatVal(pAC, IoC, LogPortIndex,
+ SK_PNMI_HTX_UNICAST, NetIndex);
+ }
+ else {
+ StatVal =
+ GetStatVal(pAC, IoC, LogPortIndex,
+ SK_PNMI_HRX_BROADCAST, NetIndex) +
+ GetStatVal(pAC, IoC, LogPortIndex,
+ SK_PNMI_HRX_MULTICAST, NetIndex) +
+ GetStatVal(pAC, IoC, LogPortIndex,
+ SK_PNMI_HRX_UNICAST, NetIndex) +
+ GetStatVal(pAC, IoC, LogPortIndex,
+ SK_PNMI_HRX_UNDERSIZE, NetIndex);
+ }
+ break;
+
+ default:
+ StatVal = 0;
+ break;
+ }
+
+ SK_PNMI_STORE_U64(pBuf + Offset, StatVal);
+ break;
+
+ default:
+ StatVal = GetStatVal(pAC, IoC, LogPortIndex,
+ IdTable[TableIndex].Param, NetIndex);
+ SK_PNMI_STORE_U64(pBuf + Offset, StatVal);
+ break;
+ }
+
+ Offset += sizeof(SK_U64);
+ }
+ *pLen = Offset;
+
+ pAC->Pnmi.MacUpdatedFlag --;
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * Addr - OID handler function of OID_SKGE_PHYS_CUR_ADDR and _FAC_ADDR
+ *
+ * Description:
+ * Get/Presets/Sets the current and factory MAC address. The MAC
+ * address of the virtual port, which is reported to the OS, may
+ * not be changed, but the physical ones. A set to the virtual port
+ * will be ignored. No error should be reported because otherwise
+ * a multiple instance set (-1) would always fail.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid
+ * value range.
+ * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set.
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int Addr(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ int Ret;
+ unsigned int LogPortMax;
+ unsigned int PhysPortMax;
+ unsigned int LogPortIndex;
+ unsigned int PhysPortIndex;
+ unsigned int Limit;
+ unsigned int Offset = 0;
+
+ /*
+ * Calculate instance if wished. MAC index 0 is the virtual
+ * MAC.
+ */
+ PhysPortMax = pAC->GIni.GIMacsFound;
+ LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax);
+
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */
+ LogPortMax--;
+ }
+
+ if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */
+ /* Check instance range */
+ if ((Instance < 1) || (Instance > LogPortMax)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+ LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance);
+ Limit = LogPortIndex + 1;
+ }
+
+ else { /* Instance == (SK_U32)(-1), get all Instances of that OID */
+
+ LogPortIndex = 0;
+ Limit = LogPortMax;
+ }
+
+ /*
+ * Perform Action
+ */
+ if (Action == SK_PNMI_GET) {
+
+ /*
+ * Check length
+ */
+ if (*pLen < (Limit - LogPortIndex) * 6) {
+
+ *pLen = (Limit - LogPortIndex) * 6;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ /*
+ * Get value
+ */
+ for (; LogPortIndex < Limit; LogPortIndex ++) {
+
+ switch (Id) {
+
+ case OID_SKGE_PHYS_CUR_ADDR:
+ if (LogPortIndex == 0) {
+ CopyMac(pBuf + Offset, &pAC->Addr.Net[NetIndex].CurrentMacAddress);
+ }
+ else {
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex);
+
+ CopyMac(pBuf + Offset,
+ &pAC->Addr.Port[PhysPortIndex].CurrentMacAddress);
+ }
+ Offset += 6;
+ break;
+
+ case OID_SKGE_PHYS_FAC_ADDR:
+ if (LogPortIndex == 0) {
+ CopyMac(pBuf + Offset,
+ &pAC->Addr.Net[NetIndex].PermanentMacAddress);
+ }
+ else {
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ CopyMac(pBuf + Offset,
+ &pAC->Addr.Port[PhysPortIndex].PermanentMacAddress);
+ }
+ Offset += 6;
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR008,
+ SK_PNMI_ERR008MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+
+ *pLen = Offset;
+ }
+ else {
+ /*
+ * The logical MAC address may not be changed only
+ * the physical ones
+ */
+ if (Id == OID_SKGE_PHYS_FAC_ADDR) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_READ_ONLY);
+ }
+
+ /*
+ * Only the current address may be changed
+ */
+ if (Id != OID_SKGE_PHYS_CUR_ADDR) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR009,
+ SK_PNMI_ERR009MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ /*
+ * Check length
+ */
+ if (*pLen < (Limit - LogPortIndex) * 6) {
+
+ *pLen = (Limit - LogPortIndex) * 6;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ if (*pLen > (Limit - LogPortIndex) * 6) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+
+ /*
+ * Check Action
+ */
+ if (Action == SK_PNMI_PRESET) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_OK);
+ }
+
+ /*
+ * Set OID_SKGE_MAC_CUR_ADDR
+ */
+ for (; LogPortIndex < Limit; LogPortIndex ++, Offset += 6) {
+
+ /*
+ * A set to virtual port and set of broadcast
+ * address will be ignored
+ */
+ if (LogPortIndex == 0 || SK_MEMCMP(pBuf + Offset,
+ "\xff\xff\xff\xff\xff\xff", 6) == 0) {
+
+ continue;
+ }
+
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC,
+ LogPortIndex);
+
+ Ret = SkAddrOverride(pAC, IoC, PhysPortIndex,
+ (SK_MAC_ADDR *)(pBuf + Offset),
+ (LogPortIndex == 0 ? SK_ADDR_VIRTUAL_ADDRESS :
+ SK_ADDR_PHYSICAL_ADDRESS));
+ if (Ret != SK_ADDR_OVERRIDE_SUCCESS) {
+
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+ *pLen = Offset;
+ }
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * CsumStat - OID handler function of OID_SKGE_CHKSM_XXX
+ *
+ * Description:
+ * Retrieves the statistic values of the CSUM module. The CSUM data
+ * structure must be available in the SK_AC even if the CSUM module
+ * is not included, because PNMI reads the statistic data from the
+ * CSUM part of SK_AC directly.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int CsumStat(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ unsigned int Index;
+ unsigned int Limit;
+ unsigned int Offset = 0;
+ SK_U64 StatVal;
+
+
+ /*
+ * Calculate instance if wished
+ */
+ if (Instance != (SK_U32)(-1)) {
+
+ if ((Instance < 1) || (Instance > SKCS_NUM_PROTOCOLS)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+ Index = (unsigned int)Instance - 1;
+ Limit = Index + 1;
+ }
+ else {
+ Index = 0;
+ Limit = SKCS_NUM_PROTOCOLS;
+ }
+
+ /*
+ * Check action
+ */
+ if (Action != SK_PNMI_GET) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_READ_ONLY);
+ }
+
+ /*
+ * Check length
+ */
+ if (*pLen < (Limit - Index) * sizeof(SK_U64)) {
+
+ *pLen = (Limit - Index) * sizeof(SK_U64);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ /*
+ * Get value
+ */
+ for (; Index < Limit; Index ++) {
+
+ switch (Id) {
+
+ case OID_SKGE_CHKSM_RX_OK_CTS:
+ StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxOkCts;
+ break;
+
+ case OID_SKGE_CHKSM_RX_UNABLE_CTS:
+ StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxUnableCts;
+ break;
+
+ case OID_SKGE_CHKSM_RX_ERR_CTS:
+ StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxErrCts;
+ break;
+
+ case OID_SKGE_CHKSM_TX_OK_CTS:
+ StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxOkCts;
+ break;
+
+ case OID_SKGE_CHKSM_TX_UNABLE_CTS:
+ StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxUnableCts;
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR010,
+ SK_PNMI_ERR010MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ SK_PNMI_STORE_U64(pBuf + Offset, StatVal);
+ Offset += sizeof(SK_U64);
+ }
+
+ /*
+ * Store used buffer space
+ */
+ *pLen = Offset;
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * SensorStat - OID handler function of OID_SKGE_SENSOR_XXX
+ *
+ * Description:
+ * Retrieves the statistic values of the I2C module, which handles
+ * the temperature and voltage sensors.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int SensorStat(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ unsigned int i;
+ unsigned int Index;
+ unsigned int Limit;
+ unsigned int Offset;
+ unsigned int Len;
+ SK_U32 Val32;
+ SK_U64 Val64;
+
+
+ /*
+ * Calculate instance if wished
+ */
+ if ((Instance != (SK_U32)(-1))) {
+
+ if ((Instance < 1) || (Instance > (SK_U32)pAC->I2c.MaxSens)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+
+ Index = (unsigned int)Instance -1;
+ Limit = (unsigned int)Instance;
+ }
+ else {
+ Index = 0;
+ Limit = (unsigned int) pAC->I2c.MaxSens;
+ }
+
+ /*
+ * Check action
+ */
+ if (Action != SK_PNMI_GET) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_READ_ONLY);
+ }
+
+ /*
+ * Check length
+ */
+ switch (Id) {
+
+ case OID_SKGE_SENSOR_VALUE:
+ case OID_SKGE_SENSOR_WAR_THRES_LOW:
+ case OID_SKGE_SENSOR_WAR_THRES_UPP:
+ case OID_SKGE_SENSOR_ERR_THRES_LOW:
+ case OID_SKGE_SENSOR_ERR_THRES_UPP:
+ if (*pLen < (Limit - Index) * sizeof(SK_U32)) {
+
+ *pLen = (Limit - Index) * sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_SKGE_SENSOR_DESCR:
+ for (Offset = 0, i = Index; i < Limit; i ++) {
+
+ Len = (unsigned int)
+ SK_STRLEN(pAC->I2c.SenTable[i].SenDesc) + 1;
+ if (Len >= SK_PNMI_STRINGLEN2) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR011,
+ SK_PNMI_ERR011MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ Offset += Len;
+ }
+ if (*pLen < Offset) {
+
+ *pLen = Offset;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_SKGE_SENSOR_INDEX:
+ case OID_SKGE_SENSOR_TYPE:
+ case OID_SKGE_SENSOR_STATUS:
+ if (*pLen < Limit - Index) {
+
+ *pLen = Limit - Index;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_SKGE_SENSOR_WAR_CTS:
+ case OID_SKGE_SENSOR_WAR_TIME:
+ case OID_SKGE_SENSOR_ERR_CTS:
+ case OID_SKGE_SENSOR_ERR_TIME:
+ if (*pLen < (Limit - Index) * sizeof(SK_U64)) {
+
+ *pLen = (Limit - Index) * sizeof(SK_U64);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR012,
+ SK_PNMI_ERR012MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+
+ }
+
+ /*
+ * Get value
+ */
+ for (Offset = 0; Index < Limit; Index ++) {
+
+ switch (Id) {
+
+ case OID_SKGE_SENSOR_INDEX:
+ *(pBuf + Offset) = (char)Index;
+ Offset += sizeof(char);
+ break;
+
+ case OID_SKGE_SENSOR_DESCR:
+ Len = SK_STRLEN(pAC->I2c.SenTable[Index].SenDesc);
+ SK_MEMCPY(pBuf + Offset + 1,
+ pAC->I2c.SenTable[Index].SenDesc, Len);
+ *(pBuf + Offset) = (char)Len;
+ Offset += Len + 1;
+ break;
+
+ case OID_SKGE_SENSOR_TYPE:
+ *(pBuf + Offset) =
+ (char)pAC->I2c.SenTable[Index].SenType;
+ Offset += sizeof(char);
+ break;
+
+ case OID_SKGE_SENSOR_VALUE:
+ Val32 = (SK_U32)pAC->I2c.SenTable[Index].SenValue;
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ Offset += sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_SENSOR_WAR_THRES_LOW:
+ Val32 = (SK_U32)pAC->I2c.SenTable[Index].
+ SenThreWarnLow;
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ Offset += sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_SENSOR_WAR_THRES_UPP:
+ Val32 = (SK_U32)pAC->I2c.SenTable[Index].
+ SenThreWarnHigh;
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ Offset += sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_SENSOR_ERR_THRES_LOW:
+ Val32 = (SK_U32)pAC->I2c.SenTable[Index].
+ SenThreErrLow;
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ Offset += sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_SENSOR_ERR_THRES_UPP:
+ Val32 = pAC->I2c.SenTable[Index].SenThreErrHigh;
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ Offset += sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_SENSOR_STATUS:
+ *(pBuf + Offset) =
+ (char)pAC->I2c.SenTable[Index].SenErrFlag;
+ Offset += sizeof(char);
+ break;
+
+ case OID_SKGE_SENSOR_WAR_CTS:
+ Val64 = pAC->I2c.SenTable[Index].SenWarnCts;
+ SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+ Offset += sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_SENSOR_ERR_CTS:
+ Val64 = pAC->I2c.SenTable[Index].SenErrCts;
+ SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+ Offset += sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_SENSOR_WAR_TIME:
+ Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index].
+ SenBegWarnTS);
+ SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+ Offset += sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_SENSOR_ERR_TIME:
+ Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index].
+ SenBegErrTS);
+ SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+ Offset += sizeof(SK_U64);
+ break;
+
+ default:
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
+ ("SensorStat: Unknown OID should be handled before"));
+
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+
+ /*
+ * Store used buffer space
+ */
+ *pLen = Offset;
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * Vpd - OID handler function of OID_SKGE_VPD_XXX
+ *
+ * Description:
+ * Get/preset/set of VPD data. As instance the name of a VPD key
+ * can be passed. The Instance parameter is a SK_U32 and can be
+ * used as a string buffer for the VPD key, because their maximum
+ * length is 4 byte.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid
+ * value range.
+ * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set.
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int Vpd(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ SK_VPD_STATUS *pVpdStatus;
+ unsigned int BufLen;
+ char Buf[256];
+ char KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE];
+ char KeyStr[SK_PNMI_VPD_KEY_SIZE];
+ unsigned int KeyNo;
+ unsigned int Offset;
+ unsigned int Index;
+ unsigned int FirstIndex;
+ unsigned int LastIndex;
+ unsigned int Len;
+ int Ret;
+ SK_U32 Val32;
+
+ /*
+ * Get array of all currently stored VPD keys
+ */
+ Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr),
+ &KeyNo);
+ if (Ret != SK_PNMI_ERR_OK) {
+ *pLen = 0;
+ return (Ret);
+ }
+
+ /*
+ * If instance is not -1, try to find the requested VPD key for
+ * the multiple instance variables. The other OIDs as for example
+ * OID VPD_ACTION are single instance variables and must be
+ * handled separatly.
+ */
+ FirstIndex = 0;
+ LastIndex = KeyNo;
+
+ if ((Instance != (SK_U32)(-1))) {
+
+ if (Id == OID_SKGE_VPD_KEY || Id == OID_SKGE_VPD_VALUE ||
+ Id == OID_SKGE_VPD_ACCESS) {
+
+ SK_STRNCPY(KeyStr, (char *)&Instance, 4);
+ KeyStr[4] = 0;
+
+ for (Index = 0; Index < KeyNo; Index ++) {
+
+ if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) {
+ FirstIndex = Index;
+ LastIndex = Index+1;
+ break;
+ }
+ }
+ if (Index == KeyNo) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+ }
+ else if (Instance != 1) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+ }
+
+ /*
+ * Get value, if a query should be performed
+ */
+ if (Action == SK_PNMI_GET) {
+
+ switch (Id) {
+
+ case OID_SKGE_VPD_FREE_BYTES:
+ /* Check length of buffer */
+ if (*pLen < sizeof(SK_U32)) {
+
+ *pLen = sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ /* Get number of free bytes */
+ pVpdStatus = VpdStat(pAC, IoC);
+ if (pVpdStatus == NULL) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR017,
+ SK_PNMI_ERR017MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ if ((pVpdStatus->vpd_status & VPD_VALID) == 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR018,
+ SK_PNMI_ERR018MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ Val32 = (SK_U32)pVpdStatus->vpd_free_rw;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_VPD_ENTRIES_LIST:
+ /* Check length */
+ for (Len = 0, Index = 0; Index < KeyNo; Index ++) {
+
+ Len += SK_STRLEN(KeyArr[Index]) + 1;
+ }
+ if (*pLen < Len) {
+
+ *pLen = Len;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ /* Get value */
+ *(pBuf) = (char)Len - 1;
+ for (Offset = 1, Index = 0; Index < KeyNo; Index ++) {
+
+ Len = SK_STRLEN(KeyArr[Index]);
+ SK_MEMCPY(pBuf + Offset, KeyArr[Index], Len);
+
+ Offset += Len;
+
+ if (Index < KeyNo - 1) {
+
+ *(pBuf + Offset) = ' ';
+ Offset ++;
+ }
+ }
+ *pLen = Offset;
+ break;
+
+ case OID_SKGE_VPD_ENTRIES_NUMBER:
+ /* Check length */
+ if (*pLen < sizeof(SK_U32)) {
+
+ *pLen = sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ Val32 = (SK_U32)KeyNo;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_VPD_KEY:
+ /* Check buffer length, if it is large enough */
+ for (Len = 0, Index = FirstIndex;
+ Index < LastIndex; Index ++) {
+
+ Len += SK_STRLEN(KeyArr[Index]) + 1;
+ }
+ if (*pLen < Len) {
+
+ *pLen = Len;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ /*
+ * Get the key to an intermediate buffer, because
+ * we have to prepend a length byte.
+ */
+ for (Offset = 0, Index = FirstIndex;
+ Index < LastIndex; Index ++) {
+
+ Len = SK_STRLEN(KeyArr[Index]);
+
+ *(pBuf + Offset) = (char)Len;
+ SK_MEMCPY(pBuf + Offset + 1, KeyArr[Index],
+ Len);
+ Offset += Len + 1;
+ }
+ *pLen = Offset;
+ break;
+
+ case OID_SKGE_VPD_VALUE:
+ /* Check the buffer length if it is large enough */
+ for (Offset = 0, Index = FirstIndex;
+ Index < LastIndex; Index ++) {
+
+ BufLen = 256;
+ if (VpdRead(pAC, IoC, KeyArr[Index], Buf,
+ (int *)&BufLen) > 0 ||
+ BufLen >= SK_PNMI_VPD_DATALEN) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW,
+ SK_PNMI_ERR021,
+ SK_PNMI_ERR021MSG);
+
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ Offset += BufLen + 1;
+ }
+ if (*pLen < Offset) {
+
+ *pLen = Offset;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ /*
+ * Get the value to an intermediate buffer, because
+ * we have to prepend a length byte.
+ */
+ for (Offset = 0, Index = FirstIndex;
+ Index < LastIndex; Index ++) {
+
+ BufLen = 256;
+ if (VpdRead(pAC, IoC, KeyArr[Index], Buf,
+ (int *)&BufLen) > 0 ||
+ BufLen >= SK_PNMI_VPD_DATALEN) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW,
+ SK_PNMI_ERR022,
+ SK_PNMI_ERR022MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ *(pBuf + Offset) = (char)BufLen;
+ SK_MEMCPY(pBuf + Offset + 1, Buf, BufLen);
+ Offset += BufLen + 1;
+ }
+ *pLen = Offset;
+ break;
+
+ case OID_SKGE_VPD_ACCESS:
+ if (*pLen < LastIndex - FirstIndex) {
+
+ *pLen = LastIndex - FirstIndex;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ for (Offset = 0, Index = FirstIndex;
+ Index < LastIndex; Index ++) {
+
+ if (VpdMayWrite(KeyArr[Index])) {
+
+ *(pBuf + Offset) = SK_PNMI_VPD_RW;
+ }
+ else {
+ *(pBuf + Offset) = SK_PNMI_VPD_RO;
+ }
+ Offset ++;
+ }
+ *pLen = Offset;
+ break;
+
+ case OID_SKGE_VPD_ACTION:
+ Offset = LastIndex - FirstIndex;
+ if (*pLen < Offset) {
+
+ *pLen = Offset;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ SK_MEMSET(pBuf, 0, Offset);
+ *pLen = Offset;
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR023,
+ SK_PNMI_ERR023MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+ else {
+ /* The only OID which can be set is VPD_ACTION */
+ if (Id != OID_SKGE_VPD_ACTION) {
+
+ if (Id == OID_SKGE_VPD_FREE_BYTES ||
+ Id == OID_SKGE_VPD_ENTRIES_LIST ||
+ Id == OID_SKGE_VPD_ENTRIES_NUMBER ||
+ Id == OID_SKGE_VPD_KEY ||
+ Id == OID_SKGE_VPD_VALUE ||
+ Id == OID_SKGE_VPD_ACCESS) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_READ_ONLY);
+ }
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR024,
+ SK_PNMI_ERR024MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ /*
+ * From this point we handle VPD_ACTION. Check the buffer
+ * length. It should at least have the size of one byte.
+ */
+ if (*pLen < 1) {
+
+ *pLen = 1;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ /*
+ * The first byte contains the VPD action type we should
+ * perform.
+ */
+ switch (*pBuf) {
+
+ case SK_PNMI_VPD_IGNORE:
+ /* Nothing to do */
+ break;
+
+ case SK_PNMI_VPD_CREATE:
+ /*
+ * We have to create a new VPD entry or we modify
+ * an existing one. Check first the buffer length.
+ */
+ if (*pLen < 4) {
+
+ *pLen = 4;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ KeyStr[0] = pBuf[1];
+ KeyStr[1] = pBuf[2];
+ KeyStr[2] = 0;
+
+ /*
+ * Is the entry writable or does it belong to the
+ * read-only area?
+ */
+ if (!VpdMayWrite(KeyStr)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+
+ Offset = (int)pBuf[3] & 0xFF;
+
+ SK_MEMCPY(Buf, pBuf + 4, Offset);
+ Buf[Offset] = 0;
+
+ /* A preset ends here */
+ if (Action == SK_PNMI_PRESET) {
+
+ return (SK_PNMI_ERR_OK);
+ }
+
+ /* Write the new entry or modify an existing one */
+ Ret = VpdWrite(pAC, IoC, KeyStr, Buf);
+ if (Ret == SK_PNMI_VPD_NOWRITE ) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+ else if (Ret != SK_PNMI_VPD_OK) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR025,
+ SK_PNMI_ERR025MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ /*
+ * Perform an update of the VPD data. This is
+ * not mandantory, but just to be sure.
+ */
+ Ret = VpdUpdate(pAC, IoC);
+ if (Ret != SK_PNMI_VPD_OK) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR026,
+ SK_PNMI_ERR026MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ break;
+
+ case SK_PNMI_VPD_DELETE:
+ /* Check if the buffer size is plausible */
+ if (*pLen < 3) {
+
+ *pLen = 3;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ if (*pLen > 3) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+ KeyStr[0] = pBuf[1];
+ KeyStr[1] = pBuf[2];
+ KeyStr[2] = 0;
+
+ /* Find the passed key in the array */
+ for (Index = 0; Index < KeyNo; Index ++) {
+
+ if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) {
+
+ break;
+ }
+ }
+ /*
+ * If we cannot find the key it is wrong, so we
+ * return an appropriate error value.
+ */
+ if (Index == KeyNo) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+
+ if (Action == SK_PNMI_PRESET) {
+
+ return (SK_PNMI_ERR_OK);
+ }
+
+ /* Ok, you wanted it and you will get it */
+ Ret = VpdDelete(pAC, IoC, KeyStr);
+ if (Ret != SK_PNMI_VPD_OK) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR027,
+ SK_PNMI_ERR027MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ /*
+ * Perform an update of the VPD data. This is
+ * not mandantory, but just to be sure.
+ */
+ Ret = VpdUpdate(pAC, IoC);
+ if (Ret != SK_PNMI_VPD_OK) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR028,
+ SK_PNMI_ERR028MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ break;
+
+ default:
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+ }
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * General - OID handler function of various single instance OIDs
+ *
+ * Description:
+ * The code is simple. No description necessary.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int General(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ int Ret;
+ unsigned int Index;
+ unsigned int Len;
+ unsigned int Offset;
+ unsigned int Val;
+ SK_U8 Val8;
+ SK_U16 Val16;
+ SK_U32 Val32;
+ SK_U64 Val64;
+ SK_U64 Val64RxHwErrs = 0;
+ SK_U64 Val64TxHwErrs = 0;
+ SK_BOOL Is64BitReq = SK_FALSE;
+ char Buf[256];
+ int MacType;
+
+ /*
+ * Check instance. We only handle single instance variables
+ */
+ if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+
+ /*
+ * Check action. We only allow get requests.
+ */
+ if (Action != SK_PNMI_GET) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_READ_ONLY);
+ }
+
+ MacType = pAC->GIni.GIMacType;
+
+ /*
+ * Check length for the various supported OIDs
+ */
+ switch (Id) {
+
+ case OID_GEN_XMIT_ERROR:
+ case OID_GEN_RCV_ERROR:
+ case OID_GEN_RCV_NO_BUFFER:
+#ifndef SK_NDIS_64BIT_CTR
+ if (*pLen < sizeof(SK_U32)) {
+ *pLen = sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+#else /* SK_NDIS_64BIT_CTR */
+
+ /*
+ * for compatibility, at least 32bit are required for oid
+ */
+ if (*pLen < sizeof(SK_U32)) {
+ /*
+ * but indicate handling for 64bit values,
+ * if insufficient space is provided
+ */
+ *pLen = sizeof(SK_U64);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+
+ Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE;
+#endif /* SK_NDIS_64BIT_CTR */
+ break;
+
+ case OID_SKGE_PORT_NUMBER:
+ case OID_SKGE_DEVICE_TYPE:
+ case OID_SKGE_RESULT:
+ case OID_SKGE_RLMT_MONITOR_NUMBER:
+ case OID_GEN_TRANSMIT_QUEUE_LENGTH:
+ case OID_SKGE_TRAP_NUMBER:
+ case OID_SKGE_MDB_VERSION:
+ if (*pLen < sizeof(SK_U32)) {
+
+ *pLen = sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_SKGE_CHIPSET:
+ if (*pLen < sizeof(SK_U16)) {
+
+ *pLen = sizeof(SK_U16);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_SKGE_BUS_TYPE:
+ case OID_SKGE_BUS_SPEED:
+ case OID_SKGE_BUS_WIDTH:
+ case OID_SKGE_SENSOR_NUMBER:
+ case OID_SKGE_CHKSM_NUMBER:
+ if (*pLen < sizeof(SK_U8)) {
+
+ *pLen = sizeof(SK_U8);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_SKGE_TX_SW_QUEUE_LEN:
+ case OID_SKGE_TX_SW_QUEUE_MAX:
+ case OID_SKGE_TX_RETRY:
+ case OID_SKGE_RX_INTR_CTS:
+ case OID_SKGE_TX_INTR_CTS:
+ case OID_SKGE_RX_NO_BUF_CTS:
+ case OID_SKGE_TX_NO_BUF_CTS:
+ case OID_SKGE_TX_USED_DESCR_NO:
+ case OID_SKGE_RX_DELIVERED_CTS:
+ case OID_SKGE_RX_OCTETS_DELIV_CTS:
+ case OID_SKGE_RX_HW_ERROR_CTS:
+ case OID_SKGE_TX_HW_ERROR_CTS:
+ case OID_SKGE_IN_ERRORS_CTS:
+ case OID_SKGE_OUT_ERROR_CTS:
+ case OID_SKGE_ERR_RECOVERY_CTS:
+ case OID_SKGE_SYSUPTIME:
+ if (*pLen < sizeof(SK_U64)) {
+
+ *pLen = sizeof(SK_U64);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ default:
+ /* Checked later */
+ break;
+ }
+
+ /* Update statistic */
+ if (Id == OID_SKGE_RX_HW_ERROR_CTS ||
+ Id == OID_SKGE_TX_HW_ERROR_CTS ||
+ Id == OID_SKGE_IN_ERRORS_CTS ||
+ Id == OID_SKGE_OUT_ERROR_CTS ||
+ Id == OID_GEN_XMIT_ERROR ||
+ Id == OID_GEN_RCV_ERROR) {
+
+ /* Force the XMAC to update its statistic counters and
+ * Increment semaphore to indicate that an update was
+ * already done.
+ */
+ Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1);
+ if (Ret != SK_PNMI_ERR_OK) {
+
+ *pLen = 0;
+ return (Ret);
+ }
+ pAC->Pnmi.MacUpdatedFlag ++;
+
+ /*
+ * Some OIDs consist of multiple hardware counters. Those
+ * values which are contained in all of them will be added
+ * now.
+ */
+ switch (Id) {
+
+ case OID_SKGE_RX_HW_ERROR_CTS:
+ case OID_SKGE_IN_ERRORS_CTS:
+ case OID_GEN_RCV_ERROR:
+ Val64RxHwErrs =
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_MISSED, NetIndex) +
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FRAMING, NetIndex) +
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_OVERFLOW, NetIndex)+
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_JABBER, NetIndex) +
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CARRIER, NetIndex) +
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_IRLENGTH, NetIndex)+
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SYMBOL, NetIndex) +
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SHORTS, NetIndex) +
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_RUNT, NetIndex) +
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_TOO_LONG, NetIndex) +
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FCS, NetIndex) +
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CEXT, NetIndex);
+ break;
+
+ case OID_SKGE_TX_HW_ERROR_CTS:
+ case OID_SKGE_OUT_ERROR_CTS:
+ case OID_GEN_XMIT_ERROR:
+ Val64TxHwErrs =
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_EXCESS_COL, NetIndex) +
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_LATE_COL, NetIndex)+
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_UNDERRUN, NetIndex)+
+ GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_CARRIER, NetIndex);
+ break;
+ }
+ }
+
+ /*
+ * Retrieve value
+ */
+ switch (Id) {
+
+ case OID_SKGE_SUPPORTED_LIST:
+ Len = ID_TABLE_SIZE * sizeof(SK_U32);
+ if (*pLen < Len) {
+
+ *pLen = Len;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ for (Offset = 0, Index = 0; Offset < Len;
+ Offset += sizeof(SK_U32), Index ++) {
+
+ Val32 = (SK_U32)IdTable[Index].Id;
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ }
+ *pLen = Len;
+ break;
+
+ case OID_SKGE_PORT_NUMBER:
+ Val32 = (SK_U32)pAC->GIni.GIMacsFound;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_DEVICE_TYPE:
+ Val32 = (SK_U32)pAC->Pnmi.DeviceType;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_DRIVER_DESCR:
+ if (pAC->Pnmi.pDriverDescription == NULL) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR007,
+ SK_PNMI_ERR007MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ Len = SK_STRLEN(pAC->Pnmi.pDriverDescription) + 1;
+ if (Len > SK_PNMI_STRINGLEN1) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR029,
+ SK_PNMI_ERR029MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ if (*pLen < Len) {
+
+ *pLen = Len;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ *pBuf = (char)(Len - 1);
+ SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverDescription, Len - 1);
+ *pLen = Len;
+ break;
+
+ case OID_SKGE_DRIVER_VERSION:
+ if (pAC->Pnmi.pDriverVersion == NULL) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030,
+ SK_PNMI_ERR030MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ Len = SK_STRLEN(pAC->Pnmi.pDriverVersion) + 1;
+ if (Len > SK_PNMI_STRINGLEN1) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031,
+ SK_PNMI_ERR031MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ if (*pLen < Len) {
+
+ *pLen = Len;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ *pBuf = (char)(Len - 1);
+ SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverVersion, Len - 1);
+ *pLen = Len;
+ break;
+
+ case OID_SKGE_HW_DESCR:
+ /*
+ * The hardware description is located in the VPD. This
+ * query may move to the initialisation routine. But
+ * the VPD data is cached and therefore a call here
+ * will not make much difference.
+ */
+ Len = 256;
+ if (VpdRead(pAC, IoC, VPD_NAME, Buf, (int *)&Len) > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR032,
+ SK_PNMI_ERR032MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ Len ++;
+ if (Len > SK_PNMI_STRINGLEN1) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR033,
+ SK_PNMI_ERR033MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ if (*pLen < Len) {
+
+ *pLen = Len;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ *pBuf = (char)(Len - 1);
+ SK_MEMCPY(pBuf + 1, Buf, Len - 1);
+ *pLen = Len;
+ break;
+
+ case OID_SKGE_HW_VERSION:
+ /* Oh, I love to do some string manipulation */
+ if (*pLen < 5) {
+
+ *pLen = 5;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ Val8 = (SK_U8)pAC->GIni.GIPciHwRev;
+ pBuf[0] = 4;
+ pBuf[1] = 'v';
+ pBuf[2] = (char)(0x30 | ((Val8 >> 4) & 0x0F));
+ pBuf[3] = '.';
+ pBuf[4] = (char)(0x30 | (Val8 & 0x0F));
+ *pLen = 5;
+ break;
+
+ case OID_SKGE_CHIPSET:
+ Val16 = pAC->Pnmi.Chipset;
+ SK_PNMI_STORE_U16(pBuf, Val16);
+ *pLen = sizeof(SK_U16);
+ break;
+
+ case OID_SKGE_BUS_TYPE:
+ *pBuf = (char)SK_PNMI_BUS_PCI;
+ *pLen = sizeof(char);
+ break;
+
+ case OID_SKGE_BUS_SPEED:
+ *pBuf = pAC->Pnmi.PciBusSpeed;
+ *pLen = sizeof(char);
+ break;
+
+ case OID_SKGE_BUS_WIDTH:
+ *pBuf = pAC->Pnmi.PciBusWidth;
+ *pLen = sizeof(char);
+ break;
+
+ case OID_SKGE_RESULT:
+ Val32 = pAC->Pnmi.TestResult;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_SENSOR_NUMBER:
+ *pBuf = (char)pAC->I2c.MaxSens;
+ *pLen = sizeof(char);
+ break;
+
+ case OID_SKGE_CHKSM_NUMBER:
+ *pBuf = SKCS_NUM_PROTOCOLS;
+ *pLen = sizeof(char);
+ break;
+
+ case OID_SKGE_TRAP_NUMBER:
+ GetTrapQueueLen(pAC, &Len, &Val);
+ Val32 = (SK_U32)Val;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_TRAP:
+ GetTrapQueueLen(pAC, &Len, &Val);
+ if (*pLen < Len) {
+
+ *pLen = Len;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ CopyTrapQueue(pAC, pBuf);
+ *pLen = Len;
+ break;
+
+ case OID_SKGE_RLMT_MONITOR_NUMBER:
+/* XXX Not yet implemented by RLMT therefore we return zero elements */
+ Val32 = 0;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_TX_SW_QUEUE_LEN:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueLen;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.BufPort[0].TxSwQueueLen +
+ pAC->Pnmi.BufPort[1].TxSwQueueLen;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueLen;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.Port[0].TxSwQueueLen +
+ pAC->Pnmi.Port[1].TxSwQueueLen;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+
+ case OID_SKGE_TX_SW_QUEUE_MAX:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueMax;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.BufPort[0].TxSwQueueMax +
+ pAC->Pnmi.BufPort[1].TxSwQueueMax;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueMax;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.Port[0].TxSwQueueMax +
+ pAC->Pnmi.Port[1].TxSwQueueMax;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_TX_RETRY:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.BufPort[NetIndex].TxRetryCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.BufPort[0].TxRetryCts +
+ pAC->Pnmi.BufPort[1].TxRetryCts;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.Port[NetIndex].TxRetryCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.Port[0].TxRetryCts +
+ pAC->Pnmi.Port[1].TxRetryCts;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_RX_INTR_CTS:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.BufPort[NetIndex].RxIntrCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.BufPort[0].RxIntrCts +
+ pAC->Pnmi.BufPort[1].RxIntrCts;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.Port[NetIndex].RxIntrCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.Port[0].RxIntrCts +
+ pAC->Pnmi.Port[1].RxIntrCts;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_TX_INTR_CTS:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.BufPort[NetIndex].TxIntrCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.BufPort[0].TxIntrCts +
+ pAC->Pnmi.BufPort[1].TxIntrCts;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.Port[NetIndex].TxIntrCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.Port[0].TxIntrCts +
+ pAC->Pnmi.Port[1].TxIntrCts;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_RX_NO_BUF_CTS:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.BufPort[0].RxNoBufCts +
+ pAC->Pnmi.BufPort[1].RxNoBufCts;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.Port[0].RxNoBufCts +
+ pAC->Pnmi.Port[1].RxNoBufCts;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_TX_NO_BUF_CTS:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.BufPort[NetIndex].TxNoBufCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.BufPort[0].TxNoBufCts +
+ pAC->Pnmi.BufPort[1].TxNoBufCts;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.Port[NetIndex].TxNoBufCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.Port[0].TxNoBufCts +
+ pAC->Pnmi.Port[1].TxNoBufCts;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_TX_USED_DESCR_NO:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.BufPort[NetIndex].TxUsedDescrNo;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.BufPort[0].TxUsedDescrNo +
+ pAC->Pnmi.BufPort[1].TxUsedDescrNo;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.Port[NetIndex].TxUsedDescrNo;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.Port[0].TxUsedDescrNo +
+ pAC->Pnmi.Port[1].TxUsedDescrNo;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_RX_DELIVERED_CTS:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.BufPort[NetIndex].RxDeliveredCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.BufPort[0].RxDeliveredCts +
+ pAC->Pnmi.BufPort[1].RxDeliveredCts;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.Port[NetIndex].RxDeliveredCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.Port[0].RxDeliveredCts +
+ pAC->Pnmi.Port[1].RxDeliveredCts;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_RX_OCTETS_DELIV_CTS:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.BufPort[NetIndex].RxOctetsDeliveredCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.BufPort[0].RxOctetsDeliveredCts +
+ pAC->Pnmi.BufPort[1].RxOctetsDeliveredCts;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.Port[0].RxOctetsDeliveredCts +
+ pAC->Pnmi.Port[1].RxOctetsDeliveredCts;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_RX_HW_ERROR_CTS:
+ SK_PNMI_STORE_U64(pBuf, Val64RxHwErrs);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_TX_HW_ERROR_CTS:
+ SK_PNMI_STORE_U64(pBuf, Val64TxHwErrs);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_IN_ERRORS_CTS:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = Val64RxHwErrs +
+ pAC->Pnmi.BufPort[0].RxNoBufCts +
+ pAC->Pnmi.BufPort[1].RxNoBufCts;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = Val64RxHwErrs +
+ pAC->Pnmi.Port[0].RxNoBufCts +
+ pAC->Pnmi.Port[1].RxNoBufCts;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_OUT_ERROR_CTS:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = Val64TxHwErrs +
+ pAC->Pnmi.BufPort[0].TxNoBufCts +
+ pAC->Pnmi.BufPort[1].TxNoBufCts;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = Val64TxHwErrs +
+ pAC->Pnmi.Port[0].TxNoBufCts +
+ pAC->Pnmi.Port[1].TxNoBufCts;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_ERR_RECOVERY_CTS:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.BufPort[NetIndex].ErrRecoveryCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.BufPort[0].ErrRecoveryCts +
+ pAC->Pnmi.BufPort[1].ErrRecoveryCts;
+ }
+ }
+ else {
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ Val64 = pAC->Pnmi.Port[NetIndex].ErrRecoveryCts;
+ }
+ /* Single net mode */
+ else {
+ Val64 = pAC->Pnmi.Port[0].ErrRecoveryCts +
+ pAC->Pnmi.Port[1].ErrRecoveryCts;
+ }
+ }
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_SYSUPTIME:
+ Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC));
+ Val64 -= pAC->Pnmi.StartUpTime;
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_MDB_VERSION:
+ Val32 = SK_PNMI_MDB_VERSION;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ break;
+
+ case OID_GEN_RCV_ERROR:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts;
+ }
+ else {
+ Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts;
+ }
+
+ /*
+ * by default 32bit values are evaluated
+ */
+ if (!Is64BitReq) {
+ Val32 = (SK_U32)Val64;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ }
+ else {
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ }
+ break;
+
+ case OID_GEN_XMIT_ERROR:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts;
+ }
+ else {
+ Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts;
+ }
+
+ /*
+ * by default 32bit values are evaluated
+ */
+ if (!Is64BitReq) {
+ Val32 = (SK_U32)Val64;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ }
+ else {
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ }
+ break;
+
+ case OID_GEN_RCV_NO_BUFFER:
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (MacType == SK_MAC_XMAC) {
+ Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts;
+ }
+ else {
+ Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts;
+ }
+
+ /*
+ * by default 32bit values are evaluated
+ */
+ if (!Is64BitReq) {
+ Val32 = (SK_U32)Val64;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ }
+ else {
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ }
+ break;
+
+ case OID_GEN_TRANSMIT_QUEUE_LENGTH:
+ Val32 = (SK_U32)pAC->Pnmi.Port[NetIndex].TxSwQueueLen;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR034,
+ SK_PNMI_ERR034MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ if (Id == OID_SKGE_RX_HW_ERROR_CTS ||
+ Id == OID_SKGE_TX_HW_ERROR_CTS ||
+ Id == OID_SKGE_IN_ERRORS_CTS ||
+ Id == OID_SKGE_OUT_ERROR_CTS ||
+ Id == OID_GEN_XMIT_ERROR ||
+ Id == OID_GEN_RCV_ERROR) {
+
+ pAC->Pnmi.MacUpdatedFlag --;
+ }
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * Rlmt - OID handler function of OID_SKGE_RLMT_XXX single instance.
+ *
+ * Description:
+ * Get/Presets/Sets the RLMT OIDs.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid
+ * value range.
+ * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set.
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int Rlmt(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ int Ret;
+ unsigned int PhysPortIndex;
+ unsigned int PhysPortMax;
+ SK_EVPARA EventParam;
+ SK_U32 Val32;
+ SK_U64 Val64;
+
+
+ /*
+ * Check instance. Only single instance OIDs are allowed here.
+ */
+ if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+
+ /*
+ * Perform the requested action
+ */
+ if (Action == SK_PNMI_GET) {
+
+ /*
+ * Check if the buffer length is large enough.
+ */
+
+ switch (Id) {
+
+ case OID_SKGE_RLMT_MODE:
+ case OID_SKGE_RLMT_PORT_ACTIVE:
+ case OID_SKGE_RLMT_PORT_PREFERRED:
+ if (*pLen < sizeof(SK_U8)) {
+
+ *pLen = sizeof(SK_U8);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_SKGE_RLMT_PORT_NUMBER:
+ if (*pLen < sizeof(SK_U32)) {
+
+ *pLen = sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_SKGE_RLMT_CHANGE_CTS:
+ case OID_SKGE_RLMT_CHANGE_TIME:
+ case OID_SKGE_RLMT_CHANGE_ESTIM:
+ case OID_SKGE_RLMT_CHANGE_THRES:
+ if (*pLen < sizeof(SK_U64)) {
+
+ *pLen = sizeof(SK_U64);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR035,
+ SK_PNMI_ERR035MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ /*
+ * Update RLMT statistic and increment semaphores to indicate
+ * that an update was already done. Maybe RLMT will hold its
+ * statistic always up to date some time. Then we can
+ * remove this type of call.
+ */
+ if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) {
+
+ *pLen = 0;
+ return (Ret);
+ }
+ pAC->Pnmi.RlmtUpdatedFlag ++;
+
+ /*
+ * Retrieve Value
+ */
+ switch (Id) {
+
+ case OID_SKGE_RLMT_MODE:
+ *pBuf = (char)pAC->Rlmt.Net[0].RlmtMode;
+ *pLen = sizeof(char);
+ break;
+
+ case OID_SKGE_RLMT_PORT_NUMBER:
+ Val32 = (SK_U32)pAC->GIni.GIMacsFound;
+ SK_PNMI_STORE_U32(pBuf, Val32);
+ *pLen = sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_RLMT_PORT_ACTIVE:
+ *pBuf = 0;
+ /*
+ * If multiple ports may become active this OID
+ * doesn't make sense any more. A new variable in
+ * the port structure should be created. However,
+ * for this variable the first active port is
+ * returned.
+ */
+ PhysPortMax = pAC->GIni.GIMacsFound;
+
+ for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax;
+ PhysPortIndex ++) {
+
+ if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+ *pBuf = (char)SK_PNMI_PORT_PHYS2LOG(PhysPortIndex);
+ break;
+ }
+ }
+ *pLen = sizeof(char);
+ break;
+
+ case OID_SKGE_RLMT_PORT_PREFERRED:
+ *pBuf = (char)SK_PNMI_PORT_PHYS2LOG(pAC->Rlmt.Net[NetIndex].Preference);
+ *pLen = sizeof(char);
+ break;
+
+ case OID_SKGE_RLMT_CHANGE_CTS:
+ Val64 = pAC->Pnmi.RlmtChangeCts;
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_RLMT_CHANGE_TIME:
+ Val64 = pAC->Pnmi.RlmtChangeTime;
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_RLMT_CHANGE_ESTIM:
+ Val64 = pAC->Pnmi.RlmtChangeEstimate.Estimate;
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_RLMT_CHANGE_THRES:
+ Val64 = pAC->Pnmi.RlmtChangeThreshold;
+ SK_PNMI_STORE_U64(pBuf, Val64);
+ *pLen = sizeof(SK_U64);
+ break;
+
+ default:
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
+ ("Rlmt: Unknown OID should be handled before"));
+
+ pAC->Pnmi.RlmtUpdatedFlag --;
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ pAC->Pnmi.RlmtUpdatedFlag --;
+ }
+ else {
+ /* Perform a preset or set */
+ switch (Id) {
+
+ case OID_SKGE_RLMT_MODE:
+ /* Check if the buffer length is plausible */
+ if (*pLen < sizeof(char)) {
+
+ *pLen = sizeof(char);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ /* Check if the value range is correct */
+ if (*pLen != sizeof(char) ||
+ (*pBuf & SK_PNMI_RLMT_MODE_CHK_LINK) == 0 ||
+ *(SK_U8 *)pBuf > 15) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+ /* The preset ends here */
+ if (Action == SK_PNMI_PRESET) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_OK);
+ }
+ /* Send an event to RLMT to change the mode */
+ SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
+ EventParam.Para32[0] |= (SK_U32)(*pBuf);
+ EventParam.Para32[1] = 0;
+ if (SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE,
+ EventParam) > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR037,
+ SK_PNMI_ERR037MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ break;
+
+ case OID_SKGE_RLMT_PORT_PREFERRED:
+ /* Check if the buffer length is plausible */
+ if (*pLen < sizeof(char)) {
+
+ *pLen = sizeof(char);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ /* Check if the value range is correct */
+ if (*pLen != sizeof(char) || *(SK_U8 *)pBuf >
+ (SK_U8)pAC->GIni.GIMacsFound) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+ /* The preset ends here */
+ if (Action == SK_PNMI_PRESET) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_OK);
+ }
+
+ /*
+ * Send an event to RLMT change the preferred port.
+ * A param of -1 means automatic mode. RLMT will
+ * make the decision which is the preferred port.
+ */
+ SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
+ EventParam.Para32[0] = (SK_U32)(*pBuf) - 1;
+ EventParam.Para32[1] = NetIndex;
+ if (SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE,
+ EventParam) > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR038,
+ SK_PNMI_ERR038MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ break;
+
+ case OID_SKGE_RLMT_CHANGE_THRES:
+ /* Check if the buffer length is plausible */
+ if (*pLen < sizeof(SK_U64)) {
+
+ *pLen = sizeof(SK_U64);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ /*
+ * There are not many restrictions to the
+ * value range.
+ */
+ if (*pLen != sizeof(SK_U64)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+ /* A preset ends here */
+ if (Action == SK_PNMI_PRESET) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_OK);
+ }
+ /*
+ * Store the new threshold, which will be taken
+ * on the next timer event.
+ */
+ SK_PNMI_READ_U64(pBuf, Val64);
+ pAC->Pnmi.RlmtChangeThreshold = Val64;
+ break;
+
+ default:
+ /* The other OIDs are not be able for set */
+ *pLen = 0;
+ return (SK_PNMI_ERR_READ_ONLY);
+ }
+ }
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * RlmtStat - OID handler function of OID_SKGE_RLMT_XXX multiple instance.
+ *
+ * Description:
+ * Performs get requests on multiple instance variables.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int RlmtStat(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ unsigned int PhysPortMax;
+ unsigned int PhysPortIndex;
+ unsigned int Limit;
+ unsigned int Offset;
+ int Ret;
+ SK_U32 Val32;
+ SK_U64 Val64;
+
+ /*
+ * Calculate the port indexes from the instance
+ */
+ PhysPortMax = pAC->GIni.GIMacsFound;
+
+ if ((Instance != (SK_U32)(-1))) {
+ /* Check instance range */
+ if ((Instance < 1) || (Instance > PhysPortMax)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+
+ /* Single net mode */
+ PhysPortIndex = Instance - 1;
+
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ PhysPortIndex = NetIndex;
+ }
+
+ /* Both net modes */
+ Limit = PhysPortIndex + 1;
+ }
+ else {
+ /* Single net mode */
+ PhysPortIndex = 0;
+ Limit = PhysPortMax;
+
+ /* Dual net mode */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ PhysPortIndex = NetIndex;
+ Limit = PhysPortIndex + 1;
+ }
+ }
+
+ /*
+ * Currently only get requests are allowed.
+ */
+ if (Action != SK_PNMI_GET) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_READ_ONLY);
+ }
+
+ /*
+ * Check if the buffer length is large enough.
+ */
+ switch (Id) {
+
+ case OID_SKGE_RLMT_PORT_INDEX:
+ case OID_SKGE_RLMT_STATUS:
+ if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) {
+
+ *pLen = (Limit - PhysPortIndex) * sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_SKGE_RLMT_TX_HELLO_CTS:
+ case OID_SKGE_RLMT_RX_HELLO_CTS:
+ case OID_SKGE_RLMT_TX_SP_REQ_CTS:
+ case OID_SKGE_RLMT_RX_SP_CTS:
+ if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U64)) {
+
+ *pLen = (Limit - PhysPortIndex) * sizeof(SK_U64);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR039,
+ SK_PNMI_ERR039MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+
+ }
+
+ /*
+ * Update statistic and increment semaphores to indicate that
+ * an update was already done.
+ */
+ if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) {
+
+ *pLen = 0;
+ return (Ret);
+ }
+ pAC->Pnmi.RlmtUpdatedFlag ++;
+
+ /*
+ * Get value
+ */
+ Offset = 0;
+ for (; PhysPortIndex < Limit; PhysPortIndex ++) {
+
+ switch (Id) {
+
+ case OID_SKGE_RLMT_PORT_INDEX:
+ Val32 = PhysPortIndex;
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ Offset += sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_RLMT_STATUS:
+ if (pAC->Rlmt.Port[PhysPortIndex].PortState ==
+ SK_RLMT_PS_INIT ||
+ pAC->Rlmt.Port[PhysPortIndex].PortState ==
+ SK_RLMT_PS_DOWN) {
+
+ Val32 = SK_PNMI_RLMT_STATUS_ERROR;
+ }
+ else if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+ Val32 = SK_PNMI_RLMT_STATUS_ACTIVE;
+ }
+ else {
+ Val32 = SK_PNMI_RLMT_STATUS_STANDBY;
+ }
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ Offset += sizeof(SK_U32);
+ break;
+
+ case OID_SKGE_RLMT_TX_HELLO_CTS:
+ Val64 = pAC->Rlmt.Port[PhysPortIndex].TxHelloCts;
+ SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+ Offset += sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_RLMT_RX_HELLO_CTS:
+ Val64 = pAC->Rlmt.Port[PhysPortIndex].RxHelloCts;
+ SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+ Offset += sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_RLMT_TX_SP_REQ_CTS:
+ Val64 = pAC->Rlmt.Port[PhysPortIndex].TxSpHelloReqCts;
+ SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+ Offset += sizeof(SK_U64);
+ break;
+
+ case OID_SKGE_RLMT_RX_SP_CTS:
+ Val64 = pAC->Rlmt.Port[PhysPortIndex].RxSpHelloCts;
+ SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+ Offset += sizeof(SK_U64);
+ break;
+
+ default:
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
+ ("RlmtStat: Unknown OID should be errored before"));
+
+ pAC->Pnmi.RlmtUpdatedFlag --;
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+ *pLen = Offset;
+
+ pAC->Pnmi.RlmtUpdatedFlag --;
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * MacPrivateConf - OID handler function of OIDs concerning the configuration
+ *
+ * Description:
+ * Get/Presets/Sets the OIDs concerning the configuration.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid
+ * value range.
+ * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set.
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int MacPrivateConf(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ unsigned int PhysPortMax;
+ unsigned int PhysPortIndex;
+ unsigned int LogPortMax;
+ unsigned int LogPortIndex;
+ unsigned int Limit;
+ unsigned int Offset;
+ char Val8;
+ int Ret;
+ SK_EVPARA EventParam;
+ SK_U32 Val32;
+
+
+ /*
+ * Calculate instance if wished. MAC index 0 is the virtual
+ * MAC.
+ */
+ PhysPortMax = pAC->GIni.GIMacsFound;
+ LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax);
+
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */
+ LogPortMax--;
+ }
+
+ if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */
+ /* Check instance range */
+ if ((Instance < 1) || (Instance > LogPortMax)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+ LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance);
+ Limit = LogPortIndex + 1;
+ }
+
+ else { /* Instance == (SK_U32)(-1), get all Instances of that OID */
+
+ LogPortIndex = 0;
+ Limit = LogPortMax;
+ }
+
+ /*
+ * Perform action
+ */
+ if (Action == SK_PNMI_GET) {
+
+ /*
+ * Check length
+ */
+ switch (Id) {
+
+ case OID_SKGE_PMD:
+ case OID_SKGE_CONNECTOR:
+ case OID_SKGE_LINK_CAP:
+ case OID_SKGE_LINK_MODE:
+ case OID_SKGE_LINK_MODE_STATUS:
+ case OID_SKGE_LINK_STATUS:
+ case OID_SKGE_FLOWCTRL_CAP:
+ case OID_SKGE_FLOWCTRL_MODE:
+ case OID_SKGE_FLOWCTRL_STATUS:
+ case OID_SKGE_PHY_OPERATION_CAP:
+ case OID_SKGE_PHY_OPERATION_MODE:
+ case OID_SKGE_PHY_OPERATION_STATUS:
+ case OID_SKGE_SPEED_CAP:
+ case OID_SKGE_SPEED_MODE:
+ case OID_SKGE_SPEED_STATUS:
+ if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U8)) {
+
+ *pLen = (Limit - LogPortIndex) *
+ sizeof(SK_U8);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_SKGE_MTU:
+ if (*pLen < sizeof(SK_U32)) {
+
+ *pLen = sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR041,
+ SK_PNMI_ERR041MSG);
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ /*
+ * Update statistic and increment semaphore to indicate
+ * that an update was already done.
+ */
+ if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) {
+
+ *pLen = 0;
+ return (Ret);
+ }
+ pAC->Pnmi.SirqUpdatedFlag ++;
+
+ /*
+ * Get value
+ */
+ Offset = 0;
+ for (; LogPortIndex < Limit; LogPortIndex ++) {
+
+ switch (Id) {
+
+ case OID_SKGE_PMD:
+ *(pBuf + Offset) = pAC->Pnmi.PMD;
+ Offset += sizeof(char);
+ break;
+
+ case OID_SKGE_CONNECTOR:
+ *(pBuf + Offset) = pAC->Pnmi.Connector;
+ Offset += sizeof(char);
+ break;
+
+ case OID_SKGE_LINK_CAP:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf +
+ Offset);
+ }
+ else {
+ /* Get value for physical ports */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) = pAC->GIni.GP[
+ PhysPortIndex].PLinkCap;
+ }
+ Offset += sizeof(char);
+ }
+ else { /* DualNetMode */
+
+ *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkCap;
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_LINK_MODE:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf +
+ Offset);
+ }
+ else {
+ /* Get value for physical ports */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) = pAC->GIni.GP[
+ PhysPortIndex].PLinkModeConf;
+ }
+ Offset += sizeof(char);
+ }
+ else { /* DualNetMode */
+
+ *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkModeConf;
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_LINK_MODE_STATUS:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf +
+ Offset);
+ }
+ else {
+ /* Get value for physical port */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) =
+ CalculateLinkModeStatus(pAC,
+ IoC, PhysPortIndex);
+ }
+ Offset += sizeof(char);
+ }
+ else { /* DualNetMode */
+ *(pBuf + Offset) = CalculateLinkModeStatus(pAC, IoC, NetIndex);
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_LINK_STATUS:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf +
+ Offset);
+ }
+ else {
+ /* Get value for physical ports */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) =
+ CalculateLinkStatus(pAC,
+ IoC, PhysPortIndex);
+ }
+ Offset += sizeof(char);
+ }
+ else { /* DualNetMode */
+
+ *(pBuf + Offset) = CalculateLinkStatus(pAC, IoC, NetIndex);
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_FLOWCTRL_CAP:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf +
+ Offset);
+ }
+ else {
+ /* Get value for physical ports */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) = pAC->GIni.GP[
+ PhysPortIndex].PFlowCtrlCap;
+ }
+ Offset += sizeof(char);
+ }
+ else { /* DualNetMode */
+
+ *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PFlowCtrlCap;
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_FLOWCTRL_MODE:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf +
+ Offset);
+ }
+ else {
+ /* Get value for physical port */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) = pAC->GIni.GP[
+ PhysPortIndex].PFlowCtrlMode;
+ }
+ Offset += sizeof(char);
+ }
+ else { /* DualNetMode */
+
+ *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PFlowCtrlMode;
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_FLOWCTRL_STATUS:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf +
+ Offset);
+ }
+ else {
+ /* Get value for physical port */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) = pAC->GIni.GP[
+ PhysPortIndex].PFlowCtrlStatus;
+ }
+ Offset += sizeof(char);
+ }
+ else { /* DualNetMode */
+
+ *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PFlowCtrlStatus;
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_PHY_OPERATION_CAP:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf +
+ Offset);
+ }
+ else {
+ /* Get value for physical ports */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) = pAC->GIni.GP[
+ PhysPortIndex].PMSCap;
+ }
+ Offset += sizeof(char);
+ }
+ else { /* DualNetMode */
+
+ *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PMSCap;
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_PHY_OPERATION_MODE:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf + Offset);
+ }
+ else {
+ /* Get value for physical port */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) = pAC->GIni.GP[
+ PhysPortIndex].PMSMode;
+ }
+ Offset += sizeof(char);
+ }
+ else { /* DualNetMode */
+
+ *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PMSMode;
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_PHY_OPERATION_STATUS:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf + Offset);
+ }
+ else {
+ /* Get value for physical port */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) = pAC->GIni.GP[
+ PhysPortIndex].PMSStatus;
+ }
+ Offset += sizeof(char);
+ }
+ else {
+
+ *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PMSStatus;
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_SPEED_CAP:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf +
+ Offset);
+ }
+ else {
+ /* Get value for physical ports */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) = pAC->GIni.GP[
+ PhysPortIndex].PLinkSpeedCap;
+ }
+ Offset += sizeof(char);
+ }
+ else { /* DualNetMode */
+
+ *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkSpeedCap;
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_SPEED_MODE:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf + Offset);
+ }
+ else {
+ /* Get value for physical port */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) = pAC->GIni.GP[
+ PhysPortIndex].PLinkSpeed;
+ }
+ Offset += sizeof(char);
+ }
+ else { /* DualNetMode */
+
+ *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkSpeed;
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_SPEED_STATUS:
+ if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+ if (LogPortIndex == 0) {
+
+ /* Get value for virtual port */
+ VirtualConf(pAC, IoC, Id, pBuf + Offset);
+ }
+ else {
+ /* Get value for physical port */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+
+ *(pBuf + Offset) = pAC->GIni.GP[
+ PhysPortIndex].PLinkSpeedUsed;
+ }
+ Offset += sizeof(char);
+ }
+ else { /* DualNetMode */
+
+ *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkSpeedUsed;
+ Offset += sizeof(char);
+ }
+ break;
+
+ case OID_SKGE_MTU:
+ Val32 = SK_DRIVER_GET_MTU(pAC, IoC, NetIndex);
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ Offset += sizeof(SK_U32);
+ break;
+
+ default:
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
+ ("MacPrivateConf: Unknown OID should be handled before"));
+
+ pAC->Pnmi.SirqUpdatedFlag --;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+ *pLen = Offset;
+ pAC->Pnmi.SirqUpdatedFlag --;
+
+ return (SK_PNMI_ERR_OK);
+ }
+
+ /*
+ * From here SET or PRESET action. Check if the passed
+ * buffer length is plausible.
+ */
+ switch (Id) {
+
+ case OID_SKGE_LINK_MODE:
+ case OID_SKGE_FLOWCTRL_MODE:
+ case OID_SKGE_PHY_OPERATION_MODE:
+ case OID_SKGE_SPEED_MODE:
+ if (*pLen < Limit - LogPortIndex) {
+
+ *pLen = Limit - LogPortIndex;
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ if (*pLen != Limit - LogPortIndex) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+ break;
+
+ case OID_SKGE_MTU:
+ if (*pLen < sizeof(SK_U32)) {
+
+ *pLen = sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ if (*pLen != sizeof(SK_U32)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+ break;
+
+ default:
+ *pLen = 0;
+ return (SK_PNMI_ERR_READ_ONLY);
+ }
+
+ /*
+ * Perform preset or set
+ */
+ Offset = 0;
+ for (; LogPortIndex < Limit; LogPortIndex ++) {
+
+ switch (Id) {
+
+ case OID_SKGE_LINK_MODE:
+ /* Check the value range */
+ Val8 = *(pBuf + Offset);
+ if (Val8 == 0) {
+
+ Offset += sizeof(char);
+ break;
+ }
+ if (Val8 < SK_LMODE_HALF ||
+ (LogPortIndex != 0 && Val8 > SK_LMODE_AUTOSENSE) ||
+ (LogPortIndex == 0 && Val8 > SK_LMODE_INDETERMINATED)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+
+ /* The preset ends here */
+ if (Action == SK_PNMI_PRESET) {
+
+ return (SK_PNMI_ERR_OK);
+ }
+
+ if (LogPortIndex == 0) {
+
+ /*
+ * The virtual port consists of all currently
+ * active ports. Find them and send an event
+ * with the new link mode to SIRQ.
+ */
+ for (PhysPortIndex = 0;
+ PhysPortIndex < PhysPortMax;
+ PhysPortIndex ++) {
+
+ if (!pAC->Pnmi.Port[PhysPortIndex].
+ ActiveFlag) {
+
+ continue;
+ }
+
+ EventParam.Para32[0] = PhysPortIndex;
+ EventParam.Para32[1] = (SK_U32)Val8;
+ if (SkGeSirqEvent(pAC, IoC,
+ SK_HWEV_SET_LMODE,
+ EventParam) > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW,
+ SK_PNMI_ERR043,
+ SK_PNMI_ERR043MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+ }
+ else {
+ /*
+ * Send an event with the new link mode to
+ * the SIRQ module.
+ */
+ EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+ EventParam.Para32[1] = (SK_U32)Val8;
+ if (SkGeSirqEvent(pAC, IoC, SK_HWEV_SET_LMODE,
+ EventParam) > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW,
+ SK_PNMI_ERR043,
+ SK_PNMI_ERR043MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+ Offset += sizeof(char);
+ break;
+
+ case OID_SKGE_FLOWCTRL_MODE:
+ /* Check the value range */
+ Val8 = *(pBuf + Offset);
+ if (Val8 == 0) {
+
+ Offset += sizeof(char);
+ break;
+ }
+ if (Val8 < SK_FLOW_MODE_NONE ||
+ (LogPortIndex != 0 && Val8 > SK_FLOW_MODE_SYM_OR_REM) ||
+ (LogPortIndex == 0 && Val8 > SK_FLOW_MODE_INDETERMINATED)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+
+ /* The preset ends here */
+ if (Action == SK_PNMI_PRESET) {
+
+ return (SK_PNMI_ERR_OK);
+ }
+
+ if (LogPortIndex == 0) {
+
+ /*
+ * The virtual port consists of all currently
+ * active ports. Find them and send an event
+ * with the new flow control mode to SIRQ.
+ */
+ for (PhysPortIndex = 0;
+ PhysPortIndex < PhysPortMax;
+ PhysPortIndex ++) {
+
+ if (!pAC->Pnmi.Port[PhysPortIndex].
+ ActiveFlag) {
+
+ continue;
+ }
+
+ EventParam.Para32[0] = PhysPortIndex;
+ EventParam.Para32[1] = (SK_U32)Val8;
+ if (SkGeSirqEvent(pAC, IoC,
+ SK_HWEV_SET_FLOWMODE,
+ EventParam) > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW,
+ SK_PNMI_ERR044,
+ SK_PNMI_ERR044MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+ }
+ else {
+ /*
+ * Send an event with the new flow control
+ * mode to the SIRQ module.
+ */
+ EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+ EventParam.Para32[1] = (SK_U32)Val8;
+ if (SkGeSirqEvent(pAC, IoC,
+ SK_HWEV_SET_FLOWMODE, EventParam)
+ > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW,
+ SK_PNMI_ERR044,
+ SK_PNMI_ERR044MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+ Offset += sizeof(char);
+ break;
+
+ case OID_SKGE_PHY_OPERATION_MODE :
+ /* Check the value range */
+ Val8 = *(pBuf + Offset);
+ if (Val8 == 0) {
+ /* mode of this port remains unchanged */
+ Offset += sizeof(char);
+ break;
+ }
+ if (Val8 < SK_MS_MODE_AUTO ||
+ (LogPortIndex != 0 && Val8 > SK_MS_MODE_SLAVE) ||
+ (LogPortIndex == 0 && Val8 > SK_MS_MODE_INDETERMINATED)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+
+ /* The preset ends here */
+ if (Action == SK_PNMI_PRESET) {
+
+ return (SK_PNMI_ERR_OK);
+ }
+
+ if (LogPortIndex == 0) {
+
+ /*
+ * The virtual port consists of all currently
+ * active ports. Find them and send an event
+ * with new master/slave (role) mode to SIRQ.
+ */
+ for (PhysPortIndex = 0;
+ PhysPortIndex < PhysPortMax;
+ PhysPortIndex ++) {
+
+ if (!pAC->Pnmi.Port[PhysPortIndex].
+ ActiveFlag) {
+
+ continue;
+ }
+
+ EventParam.Para32[0] = PhysPortIndex;
+ EventParam.Para32[1] = (SK_U32)Val8;
+ if (SkGeSirqEvent(pAC, IoC,
+ SK_HWEV_SET_ROLE,
+ EventParam) > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW,
+ SK_PNMI_ERR042,
+ SK_PNMI_ERR042MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+ }
+ else {
+ /*
+ * Send an event with the new master/slave
+ * (role) mode to the SIRQ module.
+ */
+ EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+ EventParam.Para32[1] = (SK_U32)Val8;
+ if (SkGeSirqEvent(pAC, IoC,
+ SK_HWEV_SET_ROLE, EventParam) > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW,
+ SK_PNMI_ERR042,
+ SK_PNMI_ERR042MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+
+ Offset += sizeof(char);
+ break;
+
+ case OID_SKGE_SPEED_MODE:
+ /* Check the value range */
+ Val8 = *(pBuf + Offset);
+ if (Val8 == 0) {
+
+ Offset += sizeof(char);
+ break;
+ }
+ if (Val8 < (SK_LSPEED_AUTO) ||
+ (LogPortIndex != 0 && Val8 > (SK_LSPEED_1000MBPS)) ||
+ (LogPortIndex == 0 && Val8 > (SK_LSPEED_INDETERMINATED))) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+
+ /* The preset ends here */
+ if (Action == SK_PNMI_PRESET) {
+
+ return (SK_PNMI_ERR_OK);
+ }
+
+ if (LogPortIndex == 0) {
+
+ /*
+ * The virtual port consists of all currently
+ * active ports. Find them and send an event
+ * with the new flow control mode to SIRQ.
+ */
+ for (PhysPortIndex = 0;
+ PhysPortIndex < PhysPortMax;
+ PhysPortIndex ++) {
+
+ if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+ continue;
+ }
+
+ EventParam.Para32[0] = PhysPortIndex;
+ EventParam.Para32[1] = (SK_U32)Val8;
+ if (SkGeSirqEvent(pAC, IoC,
+ SK_HWEV_SET_SPEED,
+ EventParam) > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW,
+ SK_PNMI_ERR045,
+ SK_PNMI_ERR045MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+ }
+ else {
+ /*
+ * Send an event with the new flow control
+ * mode to the SIRQ module.
+ */
+ EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS(
+ pAC, LogPortIndex);
+ EventParam.Para32[1] = (SK_U32)Val8;
+ if (SkGeSirqEvent(pAC, IoC,
+ SK_HWEV_SET_SPEED,
+ EventParam) > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW,
+ SK_PNMI_ERR045,
+ SK_PNMI_ERR045MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+ Offset += sizeof(char);
+ break;
+
+ case OID_SKGE_MTU :
+ /* Check the value range */
+ Val32 = *(SK_U32*)(pBuf + Offset);
+ if (Val32 == 0) {
+ /* mtu of this port remains unchanged */
+ Offset += sizeof(SK_U32);
+ break;
+ }
+ if (SK_DRIVER_PRESET_MTU(pAC, IoC, NetIndex, Val32) != 0) {
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+
+ /* The preset ends here */
+ if (Action == SK_PNMI_PRESET) {
+ return (SK_PNMI_ERR_OK);
+ }
+
+ if (SK_DRIVER_SET_MTU(pAC, IoC, NetIndex, Val32) != 0) {
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ Offset += sizeof(SK_U32);
+ break;
+
+ default:
+ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
+ ("MacPrivateConf: Unknown OID should be handled before set"));
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * Monitor - OID handler function for RLMT_MONITOR_XXX
+ *
+ * Description:
+ * Because RLMT currently does not support the monitoring of
+ * remote adapter cards, we return always an empty table.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid
+ * value range.
+ * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set.
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+PNMI_STATIC int Monitor(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ unsigned int Index;
+ unsigned int Limit;
+ unsigned int Offset;
+ unsigned int Entries;
+
+
+ /*
+ * Calculate instance if wished.
+ */
+/* XXX Not yet implemented. Return always an empty table. */
+ Entries = 0;
+
+ if ((Instance != (SK_U32)(-1))) {
+
+ if ((Instance < 1) || (Instance > Entries)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+
+ Index = (unsigned int)Instance - 1;
+ Limit = (unsigned int)Instance;
+ }
+ else {
+ Index = 0;
+ Limit = Entries;
+ }
+
+ /*
+ * Get/Set value
+ */
+ if (Action == SK_PNMI_GET) {
+
+ for (Offset=0; Index < Limit; Index ++) {
+
+ switch (Id) {
+
+ case OID_SKGE_RLMT_MONITOR_INDEX:
+ case OID_SKGE_RLMT_MONITOR_ADDR:
+ case OID_SKGE_RLMT_MONITOR_ERRS:
+ case OID_SKGE_RLMT_MONITOR_TIMESTAMP:
+ case OID_SKGE_RLMT_MONITOR_ADMIN:
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR046,
+ SK_PNMI_ERR046MSG);
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+ *pLen = Offset;
+ }
+ else {
+ /* Only MONITOR_ADMIN can be set */
+ if (Id != OID_SKGE_RLMT_MONITOR_ADMIN) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_READ_ONLY);
+ }
+
+ /* Check if the length is plausible */
+ if (*pLen < (Limit - Index)) {
+
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ /* Okay, we have a wide value range */
+ if (*pLen != (Limit - Index)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+/*
+ for (Offset=0; Index < Limit; Index ++) {
+ }
+*/
+/*
+ * XXX Not yet implemented. Return always BAD_VALUE, because the table
+ * is empty.
+ */
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * VirtualConf - Calculates the values of configuration OIDs for virtual port
+ *
+ * Description:
+ * We handle here the get of the configuration group OIDs, which are
+ * a little bit complicated. The virtual port consists of all currently
+ * active physical ports. If multiple ports are active and configured
+ * differently we get in some trouble to return a single value. So we
+ * get the value of the first active port and compare it with that of
+ * the other active ports. If they are not the same, we return a value
+ * that indicates that the state is indeterminated.
+ *
+ * Returns:
+ * Nothing
+ */
+PNMI_STATIC void VirtualConf(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf) /* Buffer to which to mgmt data will be retrieved */
+{
+ unsigned int PhysPortMax;
+ unsigned int PhysPortIndex;
+ SK_U8 Val8;
+ SK_BOOL PortActiveFlag;
+
+
+ *pBuf = 0;
+ PortActiveFlag = SK_FALSE;
+ PhysPortMax = pAC->GIni.GIMacsFound;
+
+ for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax;
+ PhysPortIndex ++) {
+
+ /* Check if the physical port is active */
+ if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+ continue;
+ }
+
+ PortActiveFlag = SK_TRUE;
+
+ switch (Id) {
+
+ case OID_SKGE_LINK_CAP:
+
+ /*
+ * Different capabilities should not happen, but
+ * in the case of the cases OR them all together.
+ * From a curious point of view the virtual port
+ * is capable of all found capabilities.
+ */
+ *pBuf |= pAC->GIni.GP[PhysPortIndex].PLinkCap;
+ break;
+
+ case OID_SKGE_LINK_MODE:
+ /* Check if it is the first active port */
+ if (*pBuf == 0) {
+
+ *pBuf = pAC->GIni.GP[PhysPortIndex].PLinkModeConf;
+ continue;
+ }
+
+ /*
+ * If we find an active port with a different link
+ * mode than the first one we return a value that
+ * indicates that the link mode is indeterminated.
+ */
+ if (*pBuf != pAC->GIni.GP[PhysPortIndex].PLinkModeConf
+ ) {
+
+ *pBuf = SK_LMODE_INDETERMINATED;
+ }
+ break;
+
+ case OID_SKGE_LINK_MODE_STATUS:
+ /* Get the link mode of the physical port */
+ Val8 = CalculateLinkModeStatus(pAC, IoC, PhysPortIndex);
+
+ /* Check if it is the first active port */
+ if (*pBuf == 0) {
+
+ *pBuf = Val8;
+ continue;
+ }
+
+ /*
+ * If we find an active port with a different link
+ * mode status than the first one we return a value
+ * that indicates that the link mode status is
+ * indeterminated.
+ */
+ if (*pBuf != Val8) {
+
+ *pBuf = SK_LMODE_STAT_INDETERMINATED;
+ }
+ break;
+
+ case OID_SKGE_LINK_STATUS:
+ /* Get the link status of the physical port */
+ Val8 = CalculateLinkStatus(pAC, IoC, PhysPortIndex);
+
+ /* Check if it is the first active port */
+ if (*pBuf == 0) {
+
+ *pBuf = Val8;
+ continue;
+ }
+
+ /*
+ * If we find an active port with a different link
+ * status than the first one, we return a value
+ * that indicates that the link status is
+ * indeterminated.
+ */
+ if (*pBuf != Val8) {
+
+ *pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED;
+ }
+ break;
+
+ case OID_SKGE_FLOWCTRL_CAP:
+ /* Check if it is the first active port */
+ if (*pBuf == 0) {
+
+ *pBuf = pAC->GIni.GP[PhysPortIndex].PFlowCtrlCap;
+ continue;
+ }
+
+ /*
+ * From a curious point of view the virtual port
+ * is capable of all found capabilities.
+ */
+ *pBuf |= pAC->GIni.GP[PhysPortIndex].PFlowCtrlCap;
+ break;
+
+ case OID_SKGE_FLOWCTRL_MODE:
+ /* Check if it is the first active port */
+ if (*pBuf == 0) {
+
+ *pBuf = pAC->GIni.GP[PhysPortIndex].PFlowCtrlMode;
+ continue;
+ }
+
+ /*
+ * If we find an active port with a different flow
+ * control mode than the first one, we return a value
+ * that indicates that the mode is indeterminated.
+ */
+ if (*pBuf != pAC->GIni.GP[PhysPortIndex].PFlowCtrlMode) {
+
+ *pBuf = SK_FLOW_MODE_INDETERMINATED;
+ }
+ break;
+
+ case OID_SKGE_FLOWCTRL_STATUS:
+ /* Check if it is the first active port */
+ if (*pBuf == 0) {
+
+ *pBuf = pAC->GIni.GP[PhysPortIndex].PFlowCtrlStatus;
+ continue;
+ }
+
+ /*
+ * If we find an active port with a different flow
+ * control status than the first one, we return a
+ * value that indicates that the status is
+ * indeterminated.
+ */
+ if (*pBuf != pAC->GIni.GP[PhysPortIndex].PFlowCtrlStatus) {
+
+ *pBuf = SK_FLOW_STAT_INDETERMINATED;
+ }
+ break;
+
+ case OID_SKGE_PHY_OPERATION_CAP:
+ /* Check if it is the first active port */
+ if (*pBuf == 0) {
+
+ *pBuf = pAC->GIni.GP[PhysPortIndex].PMSCap;
+ continue;
+ }
+
+ /*
+ * From a curious point of view the virtual port
+ * is capable of all found capabilities.
+ */
+ *pBuf |= pAC->GIni.GP[PhysPortIndex].PMSCap;
+ break;
+
+ case OID_SKGE_PHY_OPERATION_MODE:
+ /* Check if it is the first active port */
+ if (*pBuf == 0) {
+
+ *pBuf = pAC->GIni.GP[PhysPortIndex].PMSMode;
+ continue;
+ }
+
+ /*
+ * If we find an active port with a different master/
+ * slave mode than the first one, we return a value
+ * that indicates that the mode is indeterminated.
+ */
+ if (*pBuf != pAC->GIni.GP[PhysPortIndex].PMSMode) {
+
+ *pBuf = SK_MS_MODE_INDETERMINATED;
+ }
+ break;
+
+ case OID_SKGE_PHY_OPERATION_STATUS:
+ /* Check if it is the first active port */
+ if (*pBuf == 0) {
+
+ *pBuf = pAC->GIni.GP[PhysPortIndex].PMSStatus;
+ continue;
+ }
+
+ /*
+ * If we find an active port with a different master/
+ * slave status than the first one, we return a
+ * value that indicates that the status is
+ * indeterminated.
+ */
+ if (*pBuf != pAC->GIni.GP[PhysPortIndex].PMSStatus) {
+
+ *pBuf = SK_MS_STAT_INDETERMINATED;
+ }
+ break;
+
+ case OID_SKGE_SPEED_MODE:
+ /* Check if it is the first active port */
+ if (*pBuf == 0) {
+
+ *pBuf = pAC->GIni.GP[PhysPortIndex].PLinkSpeed;
+ continue;
+ }
+
+ /*
+ * If we find an active port with a different flow
+ * control mode than the first one, we return a value
+ * that indicates that the mode is indeterminated.
+ */
+ if (*pBuf != pAC->GIni.GP[PhysPortIndex].PLinkSpeed) {
+
+ *pBuf = SK_LSPEED_INDETERMINATED;
+ }
+ break;
+
+ case OID_SKGE_SPEED_STATUS:
+ /* Check if it is the first active port */
+ if (*pBuf == 0) {
+
+ *pBuf = pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed;
+ continue;
+ }
+
+ /*
+ * If we find an active port with a different flow
+ * control status than the first one, we return a
+ * value that indicates that the status is
+ * indeterminated.
+ */
+ if (*pBuf != pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed) {
+
+ *pBuf = SK_LSPEED_STAT_INDETERMINATED;
+ }
+ break;
+ }
+ }
+
+ /*
+ * If no port is active return an indeterminated answer
+ */
+ if (!PortActiveFlag) {
+
+ switch (Id) {
+
+ case OID_SKGE_LINK_CAP:
+ *pBuf = SK_LMODE_CAP_INDETERMINATED;
+ break;
+
+ case OID_SKGE_LINK_MODE:
+ *pBuf = SK_LMODE_INDETERMINATED;
+ break;
+
+ case OID_SKGE_LINK_MODE_STATUS:
+ *pBuf = SK_LMODE_STAT_INDETERMINATED;
+ break;
+
+ case OID_SKGE_LINK_STATUS:
+ *pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED;
+ break;
+
+ case OID_SKGE_FLOWCTRL_CAP:
+ case OID_SKGE_FLOWCTRL_MODE:
+ *pBuf = SK_FLOW_MODE_INDETERMINATED;
+ break;
+
+ case OID_SKGE_FLOWCTRL_STATUS:
+ *pBuf = SK_FLOW_STAT_INDETERMINATED;
+ break;
+
+ case OID_SKGE_PHY_OPERATION_CAP:
+ *pBuf = SK_MS_CAP_INDETERMINATED;
+ break;
+
+ case OID_SKGE_PHY_OPERATION_MODE:
+ *pBuf = SK_MS_MODE_INDETERMINATED;
+ break;
+
+ case OID_SKGE_PHY_OPERATION_STATUS:
+ *pBuf = SK_MS_STAT_INDETERMINATED;
+ break;
+ case OID_SKGE_SPEED_CAP:
+ *pBuf = SK_LSPEED_CAP_INDETERMINATED;
+ break;
+
+ case OID_SKGE_SPEED_MODE:
+ *pBuf = SK_LSPEED_INDETERMINATED;
+ break;
+
+ case OID_SKGE_SPEED_STATUS:
+ *pBuf = SK_LSPEED_STAT_INDETERMINATED;
+ break;
+ }
+ }
+}
+
+/*****************************************************************************
+ *
+ * CalculateLinkStatus - Determins the link status of a physical port
+ *
+ * Description:
+ * Determins the link status the following way:
+ * LSTAT_PHY_DOWN: Link is down
+ * LSTAT_AUTONEG: Auto-negotiation failed
+ * LSTAT_LOG_DOWN: Link is up but RLMT did not yet put the port
+ * logically up.
+ * LSTAT_LOG_UP: RLMT marked the port as up
+ *
+ * Returns:
+ * Link status of physical port
+ */
+PNMI_STATIC SK_U8 CalculateLinkStatus(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+unsigned int PhysPortIndex) /* Physical port index */
+{
+ SK_U8 Result;
+
+
+ if (!pAC->GIni.GP[PhysPortIndex].PHWLinkUp) {
+
+ Result = SK_PNMI_RLMT_LSTAT_PHY_DOWN;
+ }
+ else if (pAC->GIni.GP[PhysPortIndex].PAutoNegFail > 0) {
+
+ Result = SK_PNMI_RLMT_LSTAT_AUTONEG;
+ }
+ else if (!pAC->Rlmt.Port[PhysPortIndex].PortDown) {
+
+ Result = SK_PNMI_RLMT_LSTAT_LOG_UP;
+ }
+ else {
+ Result = SK_PNMI_RLMT_LSTAT_LOG_DOWN;
+ }
+
+ return (Result);
+}
+
+/*****************************************************************************
+ *
+ * CalculateLinkModeStatus - Determins the link mode status of a phys. port
+ *
+ * Description:
+ * The COMMON module only tells us if the mode is half or full duplex.
+ * But in the decade of auto sensing it is usefull for the user to
+ * know if the mode was negotiated or forced. Therefore we have a
+ * look to the mode, which was last used by the negotiation process.
+ *
+ * Returns:
+ * The link mode status
+ */
+PNMI_STATIC SK_U8 CalculateLinkModeStatus(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+unsigned int PhysPortIndex) /* Physical port index */
+{
+ SK_U8 Result;
+
+
+ /* Get the current mode, which can be full or half duplex */
+ Result = pAC->GIni.GP[PhysPortIndex].PLinkModeStatus;
+
+ /* Check if no valid mode could be found (link is down) */
+ if (Result < SK_LMODE_STAT_HALF) {
+
+ Result = SK_LMODE_STAT_UNKNOWN;
+ }
+ else if (pAC->GIni.GP[PhysPortIndex].PLinkMode >= SK_LMODE_AUTOHALF) {
+
+ /*
+ * Auto-negotiation was used to bring up the link. Change
+ * the already found duplex status that it indicates
+ * auto-negotiation was involved.
+ */
+ if (Result == SK_LMODE_STAT_HALF) {
+
+ Result = SK_LMODE_STAT_AUTOHALF;
+ }
+ else if (Result == SK_LMODE_STAT_FULL) {
+
+ Result = SK_LMODE_STAT_AUTOFULL;
+ }
+ }
+
+ return (Result);
+}
+
+/*****************************************************************************
+ *
+ * GetVpdKeyArr - Obtain an array of VPD keys
+ *
+ * Description:
+ * Read the VPD keys and build an array of VPD keys, which are
+ * easy to access.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK Task successfully performed.
+ * SK_PNMI_ERR_GENERAL Something went wrong.
+ */
+PNMI_STATIC int GetVpdKeyArr(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+char *pKeyArr, /* Ptr KeyArray */
+unsigned int KeyArrLen, /* Length of array in bytes */
+unsigned int *pKeyNo) /* Number of keys */
+{
+ unsigned int BufKeysLen = SK_PNMI_VPD_BUFSIZE;
+ char BufKeys[SK_PNMI_VPD_BUFSIZE];
+ unsigned int StartOffset;
+ unsigned int Offset;
+ int Index;
+ int Ret;
+
+
+ SK_MEMSET(pKeyArr, 0, KeyArrLen);
+
+ /*
+ * Get VPD key list
+ */
+ Ret = VpdKeys(pAC, IoC, (char *)&BufKeys, (int *)&BufKeysLen,
+ (int *)pKeyNo);
+ if (Ret > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR014,
+ SK_PNMI_ERR014MSG);
+
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ /* If no keys are available return now */
+ if (*pKeyNo == 0 || BufKeysLen == 0) {
+
+ return (SK_PNMI_ERR_OK);
+ }
+ /*
+ * If the key list is too long for us trunc it and give a
+ * errorlog notification. This case should not happen because
+ * the maximum number of keys is limited due to RAM limitations
+ */
+ if (*pKeyNo > SK_PNMI_VPD_ENTRIES) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR015,
+ SK_PNMI_ERR015MSG);
+
+ *pKeyNo = SK_PNMI_VPD_ENTRIES;
+ }
+
+ /*
+ * Now build an array of fixed string length size and copy
+ * the keys together.
+ */
+ for (Index = 0, StartOffset = 0, Offset = 0; Offset < BufKeysLen;
+ Offset ++) {
+
+ if (BufKeys[Offset] != 0) {
+
+ continue;
+ }
+
+ if (Offset - StartOffset > SK_PNMI_VPD_KEY_SIZE) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR016,
+ SK_PNMI_ERR016MSG);
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE,
+ &BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE);
+
+ Index ++;
+ StartOffset = Offset + 1;
+ }
+
+ /* Last key not zero terminated? Get it anyway */
+ if (StartOffset < Offset) {
+
+ SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE,
+ &BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE);
+ }
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * SirqUpdate - Let the SIRQ update its internal values
+ *
+ * Description:
+ * Just to be sure that the SIRQ module holds its internal data
+ * structures up to date, we send an update event before we make
+ * any access.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK Task successfully performed.
+ * SK_PNMI_ERR_GENERAL Something went wrong.
+ */
+PNMI_STATIC int SirqUpdate(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC) /* IO context handle */
+{
+ SK_EVPARA EventParam;
+
+
+ /* Was the module already updated during the current PNMI call? */
+ if (pAC->Pnmi.SirqUpdatedFlag > 0) {
+
+ return (SK_PNMI_ERR_OK);
+ }
+
+ /* Send an synchronuous update event to the module */
+ SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
+ if (SkGeSirqEvent(pAC, IoC, SK_HWEV_UPDATE_STAT, EventParam) > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR047,
+ SK_PNMI_ERR047MSG);
+
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * RlmtUpdate - Let the RLMT update its internal values
+ *
+ * Description:
+ * Just to be sure that the RLMT module holds its internal data
+ * structures up to date, we send an update event before we make
+ * any access.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK Task successfully performed.
+ * SK_PNMI_ERR_GENERAL Something went wrong.
+ */
+PNMI_STATIC int RlmtUpdate(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ SK_EVPARA EventParam;
+
+
+ /* Was the module already updated during the current PNMI call? */
+ if (pAC->Pnmi.RlmtUpdatedFlag > 0) {
+
+ return (SK_PNMI_ERR_OK);
+ }
+
+ /* Send an synchronuous update event to the module */
+ SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
+ EventParam.Para32[0] = NetIndex;
+ EventParam.Para32[1] = (SK_U32)-1;
+ if (SkRlmtEvent(pAC, IoC, SK_RLMT_STATS_UPDATE, EventParam) > 0) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR048,
+ SK_PNMI_ERR048MSG);
+
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * MacUpdate - Force the XMAC to output the current statistic
+ *
+ * Description:
+ * The XMAC holds its statistic internally. To obtain the current
+ * values we send a command so that the statistic data will
+ * be written to apredefined memory area on the adapter.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK Task successfully performed.
+ * SK_PNMI_ERR_GENERAL Something went wrong.
+ */
+PNMI_STATIC int MacUpdate(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+unsigned int FirstMac, /* Index of the first Mac to be updated */
+unsigned int LastMac) /* Index of the last Mac to be updated */
+{
+ unsigned int MacIndex;
+
+ /*
+ * Were the statistics already updated during the
+ * current PNMI call?
+ */
+ if (pAC->Pnmi.MacUpdatedFlag > 0) {
+
+ return (SK_PNMI_ERR_OK);
+ }
+
+ /* Send an update command to all MACs specified */
+ for (MacIndex = FirstMac; MacIndex <= LastMac; MacIndex ++) {
+
+ /*
+ * 2002-09-13 pweber: Freeze the current sw counters.
+ * (That should be done as close as
+ * possible to the update of the
+ * hw counters)
+ */
+ if (pAC->GIni.GIMacType == SK_MAC_XMAC) {
+ pAC->Pnmi.BufPort[MacIndex] = pAC->Pnmi.Port[MacIndex];
+ }
+
+ /* 2002-09-13 pweber: Update the hw counter */
+ if (pAC->GIni.GIFunc.pFnMacUpdateStats(pAC, IoC, MacIndex) != 0) {
+
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ }
+
+ return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * GetStatVal - Retrieve an XMAC statistic counter
+ *
+ * Description:
+ * Retrieves the statistic counter of a virtual or physical port. The
+ * virtual port is identified by the index 0. It consists of all
+ * currently active ports. To obtain the counter value for this port
+ * we must add the statistic counter of all active ports. To grant
+ * continuous counter values for the virtual port even when port
+ * switches occur we must additionally add a delta value, which was
+ * calculated during a SK_PNMI_EVT_RLMT_ACTIVE_UP event.
+ *
+ * Returns:
+ * Requested statistic value
+ */
+PNMI_STATIC SK_U64 GetStatVal(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+unsigned int LogPortIndex, /* Index of the logical Port to be processed */
+unsigned int StatIndex, /* Index to statistic value */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+ unsigned int PhysPortIndex;
+ unsigned int PhysPortMax;
+ SK_U64 Val = 0;
+
+
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */
+
+ PhysPortIndex = NetIndex;
+ Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex);
+ }
+ else { /* Single Net mode */
+
+ if (LogPortIndex == 0) {
+
+ PhysPortMax = pAC->GIni.GIMacsFound;
+
+ /* Add counter of all active ports */
+ for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax;
+ PhysPortIndex ++) {
+
+ if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+ Val += GetPhysStatVal(pAC, IoC, PhysPortIndex,
+ StatIndex);
+ }
+ }
+
+ /* Correct value because of port switches */
+ Val += pAC->Pnmi.VirtualCounterOffset[StatIndex];
+ }
+ else {
+ /* Get counter value of physical port */
+ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex);
+ Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex);
+ }
+ }
+ return (Val);
+}
+
+/*****************************************************************************
+ *
+ * GetPhysStatVal - Get counter value for physical port
+ *
+ * Description:
+ * Builds a 64bit counter value. Except for the octet counters
+ * the lower 32bit are counted in hardware and the upper 32bit
+ * in software by monitoring counter overflow interrupts in the
+ * event handler. To grant continous counter values during XMAC
+ * resets (caused by a workaround) we must add a delta value.
+ * The delta was calculated in the event handler when a
+ * SK_PNMI_EVT_XMAC_RESET was received.
+ *
+ * Returns:
+ * Counter value
+ */
+PNMI_STATIC SK_U64 GetPhysStatVal(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+unsigned int PhysPortIndex, /* Index of the logical Port to be processed */
+unsigned int StatIndex) /* Index to statistic value */
+{
+ SK_U64 Val = 0;
+ SK_U32 LowVal = 0;
+ SK_U32 HighVal = 0;
+ SK_U16 Word;
+ int MacType;
+
+ SK_PNMI_PORT *pPnmiPrt;
+ SK_GEMACFUNC *pFnMac;
+
+ MacType = pAC->GIni.GIMacType;
+
+ /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */
+ if (pAC->GIni.GIMacType == SK_MAC_XMAC) {
+ pPnmiPrt = &pAC->Pnmi.BufPort[PhysPortIndex];
+ }
+ else {
+ pPnmiPrt = &pAC->Pnmi.Port[PhysPortIndex];
+ }
+
+ pFnMac = &pAC->GIni.GIFunc;
+
+ switch (StatIndex) {
+ case SK_PNMI_HTX:
+ case SK_PNMI_HRX:
+ /* Not supported by GMAC */
+ if (MacType == SK_MAC_GMAC) {
+ return (Val);
+ }
+
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &LowVal);
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+ break;
+
+ case SK_PNMI_HTX_OCTET:
+ case SK_PNMI_HRX_OCTET:
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &HighVal);
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex + 1][MacType].Reg,
+ &LowVal);
+ break;
+
+ case SK_PNMI_HTX_BURST:
+ case SK_PNMI_HTX_EXCESS_DEF:
+ case SK_PNMI_HTX_CARRIER:
+ /* Not supported by GMAC */
+ if (MacType == SK_MAC_GMAC) {
+ return (Val);
+ }
+
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &LowVal);
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+ break;
+
+ case SK_PNMI_HTX_MACC:
+ /* GMAC only supports PAUSE MAC control frames */
+ if (MacType == SK_MAC_GMAC) {
+ Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, SK_PNMI_HTX_PMACC);
+
+ return (Val);
+ }
+
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &LowVal);
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+ break;
+
+ case SK_PNMI_HTX_COL:
+ case SK_PNMI_HRX_UNDERSIZE:
+ /* Not supported by XMAC */
+ if (MacType == SK_MAC_XMAC) {
+ return (Val);
+ }
+
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &LowVal);
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+ break;
+
+
+ case SK_PNMI_HTX_DEFFERAL:
+ /* Not supported by GMAC */
+ if (MacType == SK_MAC_GMAC) {
+ return (Val);
+ }
+
+ /*
+ * XMAC counts frames with deferred transmission
+ * even in full-duplex mode.
+ *
+ * In full-duplex mode the counter remains constant!
+ */
+ if ((pAC->GIni.GP[PhysPortIndex].PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) ||
+ (pAC->GIni.GP[PhysPortIndex].PLinkModeStatus == SK_LMODE_STAT_FULL)) {
+
+ LowVal = 0;
+ HighVal = 0;
+ }
+ else {
+ /* Otherwise get contents of hardware register. */
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[SK_PNMI_HTX_DEFFERAL][MacType].Reg,
+ &LowVal);
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+ }
+ break;
+
+ case SK_PNMI_HRX_BADOCTET:
+ /* Not supported by XMAC */
+ if (MacType == SK_MAC_XMAC) {
+ return (Val);
+ }
+
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &HighVal);
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex + 1][MacType].Reg,
+ &LowVal);
+ break;
+
+ case SK_PNMI_HTX_OCTETLOW:
+ case SK_PNMI_HRX_OCTETLOW:
+ case SK_PNMI_HRX_BADOCTETLOW:
+ return (Val);
+
+ case SK_PNMI_HRX_LONGFRAMES:
+ /* For XMAC the SW counter is managed by PNMI */
+ if (MacType == SK_MAC_XMAC) {
+ return (pPnmiPrt->StatRxLongFrameCts);
+ }
+
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &LowVal);
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+ break;
+
+ case SK_PNMI_HRX_TOO_LONG:
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &LowVal);
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+
+ Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal);
+
+ switch (MacType) {
+ case SK_MAC_GMAC:
+ /* For GMAC the SW counter is additionally managed by PNMI */
+ Val += pPnmiPrt->StatRxFrameTooLongCts;
+ break;
+
+ case SK_MAC_XMAC:
+ /*
+ * Frames longer than IEEE 802.3 frame max size are counted
+ * by XMAC in frame_too_long counter even reception of long
+ * frames was enabled and the frame was correct.
+ * So correct the value by subtracting RxLongFrame counter.
+ */
+ Val -= pPnmiPrt->StatRxLongFrameCts;
+ break;
+
+ default:
+ break;
+ }
+
+ LowVal = (SK_U32)Val;
+ HighVal = (SK_U32)(Val >> 32);
+ break;
+
+ case SK_PNMI_HRX_SHORTS:
+ /* Not supported by GMAC */
+ if (MacType == SK_MAC_GMAC) {
+ /* GM_RXE_FRAG?? */
+ return (Val);
+ }
+
+ /*
+ * XMAC counts short frame errors even if link down (#10620)
+ *
+ * If link-down the counter remains constant
+ */
+ if (pAC->GIni.GP[PhysPortIndex].PLinkModeStatus != SK_LMODE_STAT_UNKNOWN) {
+
+ /* Otherwise get incremental difference */
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &LowVal);
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+
+ Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal);
+ Val -= pPnmiPrt->RxShortZeroMark;
+
+ LowVal = (SK_U32)Val;
+ HighVal = (SK_U32)(Val >> 32);
+ }
+ break;
+
+ case SK_PNMI_HRX_MACC:
+ case SK_PNMI_HRX_MACC_UNKWN:
+ case SK_PNMI_HRX_BURST:
+ case SK_PNMI_HRX_MISSED:
+ case SK_PNMI_HRX_FRAMING:
+ case SK_PNMI_HRX_CARRIER:
+ case SK_PNMI_HRX_IRLENGTH:
+ case SK_PNMI_HRX_SYMBOL:
+ case SK_PNMI_HRX_CEXT:
+ /* Not supported by GMAC */
+ if (MacType == SK_MAC_GMAC) {
+ /* GM_RXE_FRAG?? */
+ return (Val);
+ }
+
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &LowVal);
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+ break;
+
+ case SK_PNMI_HRX_PMACC_ERR:
+ /* For GMAC the SW counter is managed by PNMI */
+ if (MacType == SK_MAC_GMAC) {
+ return (pPnmiPrt->StatRxPMaccErr);
+ }
+
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &LowVal);
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+ break;
+
+ /* SW counter managed by PNMI */
+ case SK_PNMI_HTX_SYNC:
+ LowVal = (SK_U32)pPnmiPrt->StatSyncCts;
+ HighVal = (SK_U32)(pPnmiPrt->StatSyncCts >> 32);
+ break;
+
+ /* SW counter managed by PNMI */
+ case SK_PNMI_HTX_SYNC_OCTET:
+ LowVal = (SK_U32)pPnmiPrt->StatSyncOctetsCts;
+ HighVal = (SK_U32)(pPnmiPrt->StatSyncOctetsCts >> 32);
+ break;
+
+ case SK_PNMI_HRX_FCS:
+ /*
+ * Broadcom filters fcs errors and counts it in
+ * Receive Error Counter register
+ */
+ if (pAC->GIni.GP[PhysPortIndex].PhyType == SK_PHY_BCOM) {
+ /* do not read while not initialized (PHY_READ hangs!)*/
+ if (pAC->GIni.GP[PhysPortIndex].PState) {
+ PHY_READ(IoC, &pAC->GIni.GP[PhysPortIndex],
+ PhysPortIndex, PHY_BCOM_RE_CTR,
+ &Word);
+
+ LowVal = Word;
+ }
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+ }
+ else {
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &LowVal);
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+ }
+ break;
+
+ default:
+ (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+ StatAddr[StatIndex][MacType].Reg,
+ &LowVal);
+ HighVal = pPnmiPrt->CounterHigh[StatIndex];
+ break;
+ }
+
+ Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal);
+
+ /* Correct value because of possible XMAC reset. XMAC Errata #2 */
+ Val += pPnmiPrt->CounterOffset[StatIndex];
+
+ return (Val);
+}
+
+/*****************************************************************************
+ *
+ * ResetCounter - Set all counters and timestamps to zero
+ *
+ * Description:
+ * Notifies other common modules which store statistic data to
+ * reset their counters and finally reset our own counters.
+ *
+ * Returns:
+ * Nothing
+ */
+PNMI_STATIC void ResetCounter(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+SK_U32 NetIndex)
+{
+ unsigned int PhysPortIndex;
+ SK_EVPARA EventParam;
+
+
+ SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
+
+ /* Notify sensor module */
+ SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_CLEAR, EventParam);
+
+ /* Notify RLMT module */
+ EventParam.Para32[0] = NetIndex;
+ EventParam.Para32[1] = (SK_U32)-1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STATS_CLEAR, EventParam);
+ EventParam.Para32[1] = 0;
+
+ /* Notify SIRQ module */
+ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_CLEAR_STAT, EventParam);
+
+ /* Notify CSUM module */
+#ifdef SK_USE_CSUM
+ EventParam.Para32[0] = NetIndex;
+ EventParam.Para32[1] = (SK_U32)-1;
+ SkEventQueue(pAC, SKGE_CSUM, SK_CSUM_EVENT_CLEAR_PROTO_STATS,
+ EventParam);
+#endif
+
+ /* Clear XMAC statistic */
+ for (PhysPortIndex = 0; PhysPortIndex <
+ (unsigned int)pAC->GIni.GIMacsFound; PhysPortIndex ++) {
+
+ (void)pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PhysPortIndex);
+
+ SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].CounterHigh,
+ 0, sizeof(pAC->Pnmi.Port[PhysPortIndex].CounterHigh));
+ SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
+ CounterOffset, 0, sizeof(pAC->Pnmi.Port[
+ PhysPortIndex].CounterOffset));
+ SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].StatSyncCts,
+ 0, sizeof(pAC->Pnmi.Port[PhysPortIndex].StatSyncCts));
+ SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
+ StatSyncOctetsCts, 0, sizeof(pAC->Pnmi.Port[
+ PhysPortIndex].StatSyncOctetsCts));
+ SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
+ StatRxLongFrameCts, 0, sizeof(pAC->Pnmi.Port[
+ PhysPortIndex].StatRxLongFrameCts));
+ SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
+ StatRxFrameTooLongCts, 0, sizeof(pAC->Pnmi.Port[
+ PhysPortIndex].StatRxFrameTooLongCts));
+ SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
+ StatRxPMaccErr, 0, sizeof(pAC->Pnmi.Port[
+ PhysPortIndex].StatRxPMaccErr));
+ }
+
+ /*
+ * Clear local statistics
+ */
+ SK_MEMSET((char *)&pAC->Pnmi.VirtualCounterOffset, 0,
+ sizeof(pAC->Pnmi.VirtualCounterOffset));
+ pAC->Pnmi.RlmtChangeCts = 0;
+ pAC->Pnmi.RlmtChangeTime = 0;
+ SK_MEMSET((char *)&pAC->Pnmi.RlmtChangeEstimate.EstValue[0], 0,
+ sizeof(pAC->Pnmi.RlmtChangeEstimate.EstValue));
+ pAC->Pnmi.RlmtChangeEstimate.EstValueIndex = 0;
+ pAC->Pnmi.RlmtChangeEstimate.Estimate = 0;
+ pAC->Pnmi.Port[NetIndex].TxSwQueueMax = 0;
+ pAC->Pnmi.Port[NetIndex].TxRetryCts = 0;
+ pAC->Pnmi.Port[NetIndex].RxIntrCts = 0;
+ pAC->Pnmi.Port[NetIndex].TxIntrCts = 0;
+ pAC->Pnmi.Port[NetIndex].RxNoBufCts = 0;
+ pAC->Pnmi.Port[NetIndex].TxNoBufCts = 0;
+ pAC->Pnmi.Port[NetIndex].TxUsedDescrNo = 0;
+ pAC->Pnmi.Port[NetIndex].RxDeliveredCts = 0;
+ pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts = 0;
+ pAC->Pnmi.Port[NetIndex].ErrRecoveryCts = 0;
+}
+
+/*****************************************************************************
+ *
+ * GetTrapEntry - Get an entry in the trap buffer
+ *
+ * Description:
+ * The trap buffer stores various events. A user application somehow
+ * gets notified that an event occured and retrieves the trap buffer
+ * contens (or simply polls the buffer). The buffer is organized as
+ * a ring which stores the newest traps at the beginning. The oldest
+ * traps are overwritten by the newest ones. Each trap entry has a
+ * unique number, so that applications may detect new trap entries.
+ *
+ * Returns:
+ * A pointer to the trap entry
+ */
+PNMI_STATIC char* GetTrapEntry(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_U32 TrapId, /* SNMP ID of the trap */
+unsigned int Size) /* Space needed for trap entry */
+{
+ unsigned int BufPad = pAC->Pnmi.TrapBufPad;
+ unsigned int BufFree = pAC->Pnmi.TrapBufFree;
+ unsigned int Beg = pAC->Pnmi.TrapQueueBeg;
+ unsigned int End = pAC->Pnmi.TrapQueueEnd;
+ char *pBuf = &pAC->Pnmi.TrapBuf[0];
+ int Wrap;
+ unsigned int NeededSpace;
+ unsigned int EntrySize;
+ SK_U32 Val32;
+ SK_U64 Val64;
+
+
+ /* Last byte of entry will get a copy of the entry length */
+ Size ++;
+
+ /*
+ * Calculate needed buffer space */
+ if (Beg >= Size) {
+
+ NeededSpace = Size;
+ Wrap = SK_FALSE;
+ }
+ else {
+ NeededSpace = Beg + Size;
+ Wrap = SK_TRUE;
+ }
+
+ /*
+ * Check if enough buffer space is provided. Otherwise
+ * free some entries. Leave one byte space between begin
+ * and end of buffer to make it possible to detect whether
+ * the buffer is full or empty
+ */
+ while (BufFree < NeededSpace + 1) {
+
+ if (End == 0) {
+
+ End = SK_PNMI_TRAP_QUEUE_LEN;
+ }
+
+ EntrySize = (unsigned int)*((unsigned char *)pBuf + End - 1);
+ BufFree += EntrySize;
+ End -= EntrySize;
+#ifdef DEBUG
+ SK_MEMSET(pBuf + End, (char)(-1), EntrySize);
+#endif
+ if (End == BufPad) {
+#ifdef DEBUG
+ SK_MEMSET(pBuf, (char)(-1), End);
+#endif
+ BufFree += End;
+ End = 0;
+ BufPad = 0;
+ }
+ }
+
+ /*
+ * Insert new entry as first entry. Newest entries are
+ * stored at the beginning of the queue.
+ */
+ if (Wrap) {
+
+ BufPad = Beg;
+ Beg = SK_PNMI_TRAP_QUEUE_LEN - Size;
+ }
+ else {
+ Beg = Beg - Size;
+ }
+ BufFree -= NeededSpace;
+
+ /* Save the current offsets */
+ pAC->Pnmi.TrapQueueBeg = Beg;
+ pAC->Pnmi.TrapQueueEnd = End;
+ pAC->Pnmi.TrapBufPad = BufPad;
+ pAC->Pnmi.TrapBufFree = BufFree;
+
+ /* Initialize the trap entry */
+ *(pBuf + Beg + Size - 1) = (char)Size;
+ *(pBuf + Beg) = (char)Size;
+ Val32 = (pAC->Pnmi.TrapUnique) ++;
+ SK_PNMI_STORE_U32(pBuf + Beg + 1, Val32);
+ SK_PNMI_STORE_U32(pBuf + Beg + 1 + sizeof(SK_U32), TrapId);
+ Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC));
+ SK_PNMI_STORE_U64(pBuf + Beg + 1 + 2 * sizeof(SK_U32), Val64);
+
+ return (pBuf + Beg);
+}
+
+/*****************************************************************************
+ *
+ * CopyTrapQueue - Copies the trap buffer for the TRAP OID
+ *
+ * Description:
+ * On a query of the TRAP OID the trap buffer contents will be
+ * copied continuously to the request buffer, which must be large
+ * enough. No length check is performed.
+ *
+ * Returns:
+ * Nothing
+ */
+PNMI_STATIC void CopyTrapQueue(
+SK_AC *pAC, /* Pointer to adapter context */
+char *pDstBuf) /* Buffer to which the queued traps will be copied */
+{
+ unsigned int BufPad = pAC->Pnmi.TrapBufPad;
+ unsigned int Trap = pAC->Pnmi.TrapQueueBeg;
+ unsigned int End = pAC->Pnmi.TrapQueueEnd;
+ char *pBuf = &pAC->Pnmi.TrapBuf[0];
+ unsigned int Len;
+ unsigned int DstOff = 0;
+
+
+ while (Trap != End) {
+
+ Len = (unsigned int)*(pBuf + Trap);
+
+ /*
+ * Last byte containing a copy of the length will
+ * not be copied.
+ */
+ *(pDstBuf + DstOff) = (char)(Len - 1);
+ SK_MEMCPY(pDstBuf + DstOff + 1, pBuf + Trap + 1, Len - 2);
+ DstOff += Len - 1;
+
+ Trap += Len;
+ if (Trap == SK_PNMI_TRAP_QUEUE_LEN) {
+
+ Trap = BufPad;
+ }
+ }
+}
+
+/*****************************************************************************
+ *
+ * GetTrapQueueLen - Get the length of the trap buffer
+ *
+ * Description:
+ * Evaluates the number of currently stored traps and the needed
+ * buffer size to retrieve them.
+ *
+ * Returns:
+ * Nothing
+ */
+PNMI_STATIC void GetTrapQueueLen(
+SK_AC *pAC, /* Pointer to adapter context */
+unsigned int *pLen, /* Length in Bytes of all queued traps */
+unsigned int *pEntries) /* Returns number of trapes stored in queue */
+{
+ unsigned int BufPad = pAC->Pnmi.TrapBufPad;
+ unsigned int Trap = pAC->Pnmi.TrapQueueBeg;
+ unsigned int End = pAC->Pnmi.TrapQueueEnd;
+ char *pBuf = &pAC->Pnmi.TrapBuf[0];
+ unsigned int Len;
+ unsigned int Entries = 0;
+ unsigned int TotalLen = 0;
+
+
+ while (Trap != End) {
+
+ Len = (unsigned int)*(pBuf + Trap);
+ TotalLen += Len - 1;
+ Entries ++;
+
+ Trap += Len;
+ if (Trap == SK_PNMI_TRAP_QUEUE_LEN) {
+
+ Trap = BufPad;
+ }
+ }
+
+ *pEntries = Entries;
+ *pLen = TotalLen;
+}
+
+/*****************************************************************************
+ *
+ * QueueSimpleTrap - Store a simple trap to the trap buffer
+ *
+ * Description:
+ * A simple trap is a trap with now additional data. It consists
+ * simply of a trap code.
+ *
+ * Returns:
+ * Nothing
+ */
+PNMI_STATIC void QueueSimpleTrap(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_U32 TrapId) /* Type of sensor trap */
+{
+ GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_SIMPLE_LEN);
+}
+
+/*****************************************************************************
+ *
+ * QueueSensorTrap - Stores a sensor trap in the trap buffer
+ *
+ * Description:
+ * Gets an entry in the trap buffer and fills it with sensor related
+ * data.
+ *
+ * Returns:
+ * Nothing
+ */
+PNMI_STATIC void QueueSensorTrap(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_U32 TrapId, /* Type of sensor trap */
+unsigned int SensorIndex) /* Index of sensor which caused the trap */
+{
+ char *pBuf;
+ unsigned int Offset;
+ unsigned int DescrLen;
+ SK_U32 Val32;
+
+
+ /* Get trap buffer entry */
+ DescrLen = SK_STRLEN(pAC->I2c.SenTable[SensorIndex].SenDesc);
+ pBuf = GetTrapEntry(pAC, TrapId,
+ SK_PNMI_TRAP_SENSOR_LEN_BASE + DescrLen);
+ Offset = SK_PNMI_TRAP_SIMPLE_LEN;
+
+ /* Store additionally sensor trap related data */
+ Val32 = OID_SKGE_SENSOR_INDEX;
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ *(pBuf + Offset + 4) = 4;
+ Val32 = (SK_U32)SensorIndex;
+ SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32);
+ Offset += 9;
+
+ Val32 = (SK_U32)OID_SKGE_SENSOR_DESCR;
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ *(pBuf + Offset + 4) = (char)DescrLen;
+ SK_MEMCPY(pBuf + Offset + 5, pAC->I2c.SenTable[SensorIndex].SenDesc,
+ DescrLen);
+ Offset += DescrLen + 5;
+
+ Val32 = OID_SKGE_SENSOR_TYPE;
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ *(pBuf + Offset + 4) = 1;
+ *(pBuf + Offset + 5) = (char)pAC->I2c.SenTable[SensorIndex].SenType;
+ Offset += 6;
+
+ Val32 = OID_SKGE_SENSOR_VALUE;
+ SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+ *(pBuf + Offset + 4) = 4;
+ Val32 = (SK_U32)pAC->I2c.SenTable[SensorIndex].SenValue;
+ SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32);
+}
+
+/*****************************************************************************
+ *
+ * QueueRlmtNewMacTrap - Store a port switch trap in the trap buffer
+ *
+ * Description:
+ * Nothing further to explain.
+ *
+ * Returns:
+ * Nothing
+ */
+PNMI_STATIC void QueueRlmtNewMacTrap(
+SK_AC *pAC, /* Pointer to adapter context */
+unsigned int ActiveMac) /* Index (0..n) of the currently active port */
+{
+ char *pBuf;
+ SK_U32 Val32;
+
+
+ pBuf = GetTrapEntry(pAC, OID_SKGE_TRAP_RLMT_CHANGE_PORT,
+ SK_PNMI_TRAP_RLMT_CHANGE_LEN);
+
+ Val32 = OID_SKGE_RLMT_PORT_ACTIVE;
+ SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32);
+ *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1;
+ *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)ActiveMac;
+}
+
+/*****************************************************************************
+ *
+ * QueueRlmtPortTrap - Store port related RLMT trap to trap buffer
+ *
+ * Description:
+ * Nothing further to explain.
+ *
+ * Returns:
+ * Nothing
+ */
+PNMI_STATIC void QueueRlmtPortTrap(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_U32 TrapId, /* Type of RLMT port trap */
+unsigned int PortIndex) /* Index of the port, which changed its state */
+{
+ char *pBuf;
+ SK_U32 Val32;
+
+
+ pBuf = GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_RLMT_PORT_LEN);
+
+ Val32 = OID_SKGE_RLMT_PORT_INDEX;
+ SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32);
+ *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1;
+ *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)PortIndex;
+}
+
+/*****************************************************************************
+ *
+ * CopyMac - Copies a MAC address
+ *
+ * Description:
+ * Nothing further to explain.
+ *
+ * Returns:
+ * Nothing
+ */
+PNMI_STATIC void CopyMac(
+char *pDst, /* Pointer to destination buffer */
+SK_MAC_ADDR *pMac) /* Pointer of Source */
+{
+ int i;
+
+
+ for (i = 0; i < sizeof(SK_MAC_ADDR); i ++) {
+
+ *(pDst + i) = pMac->a[i];
+ }
+}
+
+
+#ifdef SK_POWER_MGMT
+/*****************************************************************************
+ *
+ * PowerManagement - OID handler function of PowerManagement OIDs
+ *
+ * Description:
+ * The code is simple. No description necessary.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was successfully performed.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter.
+ */
+
+PNMI_STATIC int PowerManagement(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
+{
+
+ SK_U32 RetCode = SK_PNMI_ERR_GENERAL;
+
+ /*
+ * Check instance. We only handle single instance variables
+ */
+ if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+
+ /*
+ * Perform action
+ */
+ if (Action == SK_PNMI_GET) {
+
+ /*
+ * Check length
+ */
+ switch (Id) {
+
+ case OID_PNP_CAPABILITIES:
+ if (*pLen < sizeof(SK_PNP_CAPABILITIES)) {
+
+ *pLen = sizeof(SK_PNP_CAPABILITIES);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_PNP_QUERY_POWER:
+ case OID_PNP_ENABLE_WAKE_UP:
+ if (*pLen < sizeof(SK_U32)) {
+
+ *pLen = sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_PNP_SET_POWER:
+ case OID_PNP_ADD_WAKE_UP_PATTERN:
+ case OID_PNP_REMOVE_WAKE_UP_PATTERN:
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR040,
+ SK_PNMI_ERR040MSG);
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ /*
+ * Get value
+ */
+ switch (Id) {
+
+ case OID_PNP_CAPABILITIES:
+ RetCode = SkPowerQueryPnPCapabilities(pAC, IoC, pBuf, pLen);
+ break;
+
+ case OID_PNP_QUERY_POWER:
+ /* The Windows DDK describes: An OID_PNP_QUERY_POWER requests
+ the miniport to indicate whether it can transition its NIC
+ to the low-power state.
+ A miniport driver must always return NDIS_STATUS_SUCCESS
+ to a query of OID_PNP_QUERY_POWER. */
+ RetCode = SK_PNMI_ERR_OK;
+ break;
+
+ /* NDIS handles these OIDs as write-only.
+ * So in case of get action the buffer with written length = 0
+ * is returned
+ */
+ case OID_PNP_SET_POWER:
+ case OID_PNP_ADD_WAKE_UP_PATTERN:
+ case OID_PNP_REMOVE_WAKE_UP_PATTERN:
+ *pLen = 0;
+ RetCode = SK_PNMI_ERR_OK;
+ break;
+
+ case OID_PNP_ENABLE_WAKE_UP:
+ RetCode = SkPowerGetEnableWakeUp(pAC, IoC, pBuf, pLen);
+ break;
+
+ default:
+ RetCode = SK_PNMI_ERR_GENERAL;
+ break;
+ }
+
+ return (RetCode);
+ }
+
+ /*
+ * From here SET or PRESET action. Check if the passed
+ * buffer length is plausible.
+ */
+ switch (Id) {
+ case OID_PNP_SET_POWER:
+ case OID_PNP_ENABLE_WAKE_UP:
+ if (*pLen < sizeof(SK_U32)) {
+
+ *pLen = sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ if (*pLen != sizeof(SK_U32)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+ break;
+
+ case OID_PNP_ADD_WAKE_UP_PATTERN:
+ case OID_PNP_REMOVE_WAKE_UP_PATTERN:
+ if (*pLen < sizeof(SK_PM_PACKET_PATTERN)) {
+
+ *pLen = 0;
+ return (SK_PNMI_ERR_BAD_VALUE);
+ }
+ break;
+
+ default:
+ *pLen = 0;
+ return (SK_PNMI_ERR_READ_ONLY);
+ }
+
+ /*
+ * Perform preset or set
+ */
+
+ /* POWER module does not support PRESET action */
+ if (Action == SK_PNMI_PRESET) {
+ return (SK_PNMI_ERR_OK);
+ }
+
+ switch (Id) {
+ case OID_PNP_SET_POWER:
+ RetCode = SkPowerSetPower(pAC, IoC, pBuf, pLen);
+ break;
+
+ case OID_PNP_ADD_WAKE_UP_PATTERN:
+ RetCode = SkPowerAddWakeUpPattern(pAC, IoC, pBuf, pLen);
+ break;
+
+ case OID_PNP_REMOVE_WAKE_UP_PATTERN:
+ RetCode = SkPowerRemoveWakeUpPattern(pAC, IoC, pBuf, pLen);
+ break;
+
+ case OID_PNP_ENABLE_WAKE_UP:
+ RetCode = SkPowerSetEnableWakeUp(pAC, IoC, pBuf, pLen);
+ break;
+
+ default:
+ RetCode = SK_PNMI_ERR_GENERAL;
+ }
+
+ return (RetCode);
+}
+#endif /* SK_POWER_MGMT */
+
+
+/*****************************************************************************
+ *
+ * Vct - OID handler function of OIDs
+ *
+ * Description:
+ * The code is simple. No description necessary.
+ *
+ * Returns:
+ * SK_PNMI_ERR_OK The request was performed successfully.
+ * SK_PNMI_ERR_GENERAL A general severe internal error occured.
+ * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain
+ * the correct data (e.g. a 32bit value is
+ * needed, but a 16 bit value was passed).
+ * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ * exist (e.g. port instance 3 on a two port
+ * adapter).
+ * SK_PNMI_ERR_READ_ONLY Only the Get action is allowed.
+ *
+ */
+
+PNMI_STATIC int Vct(
+SK_AC *pAC, /* Pointer to adapter context */
+SK_IOC IoC, /* IO context handle */
+int Action, /* Get/PreSet/Set action */
+SK_U32 Id, /* Object ID that is to be processed */
+char *pBuf, /* Buffer to which the mgmt data will be copied */
+unsigned int *pLen, /* On call: buffer length. On return: used buffer */
+SK_U32 Instance, /* Instance (-1,2..n) that is to be queried */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */
+{
+ SK_GEPORT *pPrt;
+ SK_PNMI_VCT *pVctBackupData;
+ SK_U32 LogPortMax;
+ SK_U32 PhysPortMax;
+ SK_U32 PhysPortIndex;
+ SK_U32 Limit;
+ SK_U32 Offset;
+ SK_BOOL Link;
+ SK_U32 RetCode = SK_PNMI_ERR_GENERAL;
+ int i;
+ SK_EVPARA Para;
+ SK_U32 CableLength;
+
+ /*
+ * Calculate the port indexes from the instance.
+ */
+ PhysPortMax = pAC->GIni.GIMacsFound;
+ LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax);
+
+ /* Dual net mode? */
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ LogPortMax--;
+ }
+
+ if ((Instance != (SK_U32) (-1))) {
+ /* Check instance range. */
+ if ((Instance < 2) || (Instance > LogPortMax)) {
+ *pLen = 0;
+ return (SK_PNMI_ERR_UNKNOWN_INST);
+ }
+
+ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+ PhysPortIndex = NetIndex;
+ }
+ else {
+ PhysPortIndex = Instance - 2;
+ }
+ Limit = PhysPortIndex + 1;
+ }
+ else { /*
+ * Instance == (SK_U32) (-1), get all Instances of that OID.
+ *
+ * Not implemented yet. May be used in future releases.
+ */
+ PhysPortIndex = 0;
+ Limit = PhysPortMax;
+ }
+
+ pPrt = &pAC->GIni.GP[PhysPortIndex];
+ if (pPrt->PHWLinkUp) {
+ Link = SK_TRUE;
+ }
+ else {
+ Link = SK_FALSE;
+ }
+
+ /*
+ * Check MAC type.
+ */
+ if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ /* Initialize backup data pointer. */
+ pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex];
+
+ /*
+ * Check action type.
+ */
+ if (Action == SK_PNMI_GET) {
+ /*
+ * Check length.
+ */
+ switch (Id) {
+
+ case OID_SKGE_VCT_GET:
+ if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT)) {
+ *pLen = (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ case OID_SKGE_VCT_STATUS:
+ if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U8)) {
+ *pLen = (Limit - PhysPortIndex) * sizeof(SK_U8);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ default:
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ /*
+ * Get value.
+ */
+ Offset = 0;
+ for (; PhysPortIndex < Limit; PhysPortIndex++) {
+ switch (Id) {
+
+ case OID_SKGE_VCT_GET:
+ if ((Link == SK_FALSE) &&
+ (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING)) {
+ RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE);
+ if (RetCode == 0) {
+ pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING;
+ pAC->Pnmi.VctStatus[PhysPortIndex] |=
+ (SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE);
+
+ /* Copy results for later use to PNMI struct. */
+ for (i = 0; i < 4; i++) {
+ if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) {
+ if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] < 0xff)) {
+ pPrt->PMdiPairSts[i] = SK_PNMI_VCT_IMPEDANCE_MISMATCH;
+ }
+ }
+ if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] != 0xff)) {
+ CableLength = 1000 * (((175 * pPrt->PMdiPairLen[i]) / 210) - 28);
+ }
+ else {
+ CableLength = 0;
+ }
+ pVctBackupData->PMdiPairLen[i] = CableLength;
+ pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i];
+ }
+
+ Para.Para32[0] = PhysPortIndex;
+ Para.Para32[1] = -1;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
+ SkEventDispatcher(pAC, IoC);
+ }
+ else {
+ ; /* VCT test is running. */
+ }
+ }
+
+ /* Get all results. */
+ CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex);
+ Offset += sizeof(SK_U8);
+ *(pBuf + Offset) = pPrt->PCableLen;
+ Offset += sizeof(SK_U8);
+ for (i = 0; i < 4; i++) {
+ SK_PNMI_STORE_U32((pBuf + Offset), pVctBackupData->PMdiPairLen[i]);
+ Offset += sizeof(SK_U32);
+ }
+ for (i = 0; i < 4; i++) {
+ *(pBuf + Offset) = pVctBackupData->PMdiPairSts[i];
+ Offset += sizeof(SK_U8);
+ }
+
+ RetCode = SK_PNMI_ERR_OK;
+ break;
+
+ case OID_SKGE_VCT_STATUS:
+ CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex);
+ Offset += sizeof(SK_U8);
+ RetCode = SK_PNMI_ERR_OK;
+ break;
+
+ default:
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ } /* for */
+ *pLen = Offset;
+ return (RetCode);
+
+ } /* if SK_PNMI_GET */
+
+ /*
+ * From here SET or PRESET action. Check if the passed
+ * buffer length is plausible.
+ */
+
+ /*
+ * Check length.
+ */
+ switch (Id) {
+ case OID_SKGE_VCT_SET:
+ if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) {
+ *pLen = (Limit - PhysPortIndex) * sizeof(SK_U32);
+ return (SK_PNMI_ERR_TOO_SHORT);
+ }
+ break;
+
+ default:
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+
+ /*
+ * Perform preset or set.
+ */
+
+ /* VCT does not support PRESET action. */
+ if (Action == SK_PNMI_PRESET) {
+ return (SK_PNMI_ERR_OK);
+ }
+
+ Offset = 0;
+ for (; PhysPortIndex < Limit; PhysPortIndex++) {
+ switch (Id) {
+ case OID_SKGE_VCT_SET: /* Start VCT test. */
+ if (Link == SK_FALSE) {
+ SkGeStopPort(pAC, IoC, PhysPortIndex, SK_STOP_ALL, SK_SOFT_RST);
+
+ RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_TRUE);
+ if (RetCode == 0) { /* RetCode: 0 => Start! */
+ pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_PENDING;
+ pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_NEW_VCT_DATA;
+ pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_LINK;
+
+ /*
+ * Start VCT timer counter.
+ */
+ SK_MEMSET((char *) &Para, 0, sizeof(Para));
+ Para.Para32[0] = PhysPortIndex;
+ Para.Para32[1] = -1;
+ SkTimerStart(pAC, IoC, &pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer,
+ 4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Para);
+ SK_PNMI_STORE_U32((pBuf + Offset), RetCode);
+ RetCode = SK_PNMI_ERR_OK;
+ }
+ else { /* RetCode: 2 => Running! */
+ SK_PNMI_STORE_U32((pBuf + Offset), RetCode);
+ RetCode = SK_PNMI_ERR_OK;
+ }
+ }
+ else { /* RetCode: 4 => Link! */
+ RetCode = 4;
+ SK_PNMI_STORE_U32((pBuf + Offset), RetCode);
+ RetCode = SK_PNMI_ERR_OK;
+ }
+ Offset += sizeof(SK_U32);
+ break;
+
+ default:
+ *pLen = 0;
+ return (SK_PNMI_ERR_GENERAL);
+ }
+ } /* for */
+ *pLen = Offset;
+ return (RetCode);
+
+} /* Vct */
+
+
+PNMI_STATIC void CheckVctStatus(
+SK_AC *pAC,
+SK_IOC IoC,
+char *pBuf,
+SK_U32 Offset,
+SK_U32 PhysPortIndex)
+{
+ SK_GEPORT *pPrt;
+ SK_PNMI_VCT *pVctData;
+ SK_U32 RetCode;
+ SK_U8 LinkSpeedUsed;
+
+ pPrt = &pAC->GIni.GP[PhysPortIndex];
+
+ pVctData = (SK_PNMI_VCT *) (pBuf + Offset);
+ pVctData->VctStatus = SK_PNMI_VCT_NONE;
+
+ if (!pPrt->PHWLinkUp) {
+
+ /* Was a VCT test ever made before? */
+ if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) {
+ if ((pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_LINK)) {
+ pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA;
+ }
+ else {
+ pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA;
+ }
+ }
+
+ /* Check VCT test status. */
+ RetCode = SkGmCableDiagStatus(pAC,IoC, PhysPortIndex, SK_FALSE);
+ if (RetCode == 2) { /* VCT test is running. */
+ pVctData->VctStatus |= SK_PNMI_VCT_RUNNING;
+ }
+ else { /* VCT data was copied to pAC here. Check PENDING state. */
+ if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) {
+ pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA;
+ }
+ }
+
+ if (pPrt->PCableLen != 0xff) { /* Old DSP value. */
+ pVctData->VctStatus |= SK_PNMI_VCT_OLD_DSP_DATA;
+ }
+ }
+ else {
+
+ /* Was a VCT test ever made before? */
+ if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) {
+ pVctData->VctStatus &= ~SK_PNMI_VCT_NEW_VCT_DATA;
+ pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA;
+ }
+
+ /* DSP only valid in 100/1000 modes. */
+ LinkSpeedUsed = pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed;
+ if (LinkSpeedUsed != SK_LSPEED_STAT_10MBPS) {
+ pVctData->VctStatus |= SK_PNMI_VCT_NEW_DSP_DATA;
+ }
+ }
+
+} /* CheckVctStatus */
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/sk98lin/skgesirq.c b/drivers/net/sk98lin/skgesirq.c
new file mode 100644
index 0000000..e5a4f7e
--- /dev/null
+++ b/drivers/net/sk98lin/skgesirq.c
@@ -0,0 +1,2417 @@
+/******************************************************************************
+ *
+ * Name: skgesirq.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.83 $
+ * Date: $Date: 2003/02/05 15:10:59 $
+ * Purpose: Special IRQ module
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skgesirq.c,v $
+ * Revision 1.83 2003/02/05 15:10:59 rschmidt
+ * Fixed setting of PLinkSpeedUsed in SkHWLinkUp() when
+ * auto-negotiation is disabled.
+ * Editorial changes.
+ *
+ * Revision 1.82 2003/01/29 13:34:33 rschmidt
+ * Added some typecasts to avoid compiler warnings.
+ *
+ * Revision 1.81 2002/12/05 10:49:51 rschmidt
+ * Fixed missing Link Down Event for fiber (Bug Id #10768)
+ * Added reading of cable length when link is up
+ * Removed testing of unused error bits in PHY ISR
+ * Editorial changes.
+ *
+ * Revision 1.80 2002/11/12 17:15:21 rschmidt
+ * Replaced SkPnmiGetVar() by ...MacStatistic() in SkMacParity().
+ * Editorial changes.
+ *
+ * Revision 1.79 2002/10/14 15:14:51 rschmidt
+ * Changed clearing of IS_M1_PAR_ERR (MAC 1 Parity Error) in
+ * SkMacParity() depending on GIChipRev (HW-Bug #8).
+ * Added error messages for GPHY Auto-Negotiation Error and
+ * FIFO Overflow/Underrun in SkPhyIsrGmac().
+ * Editorial changes.
+ *
+ * Revision 1.78 2002/10/10 15:54:29 mkarl
+ * changes for PLinkSpeedUsed
+ *
+ * Revision 1.77 2002/09/12 08:58:51 rwahl
+ * Retrieve counters needed for XMAC errata workarounds directly because
+ * PNMI returns corrected counter values (e.g. #10620).
+ *
+ * Revision 1.76 2002/08/16 15:21:54 rschmidt
+ * Replaced all if(GIChipId == CHIP_ID_GENESIS) with new entry GIGenesis.
+ * Replaced wrong 1st para pAC with IoC in SK_IN/OUT macros.
+ * Editorial changes.
+ *
+ * Revision 1.75 2002/08/12 13:50:47 rschmidt
+ * Changed clearing of IS_M1_PAR_ERR (MAC 1 Parity Error) in
+ * SkMacParity() by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE (HW-Bug #8).
+ * Added clearing of IS_IRQ_TIST_OV and IS_IRQ_SENSOR in SkGeHwErr().
+ * Corrected handling of Link Up and Auto-Negotiation Over for GPHY.
+ * in SkGePortCheckUpGmac().
+ * Editorial changes.
+ *
+ * Revision 1.74 2002/08/08 16:17:04 rschmidt
+ * Added PhyType check for SK_HWEV_SET_ROLE event (copper only)
+ * Changed Link Up check reading PHY Specific Status (YUKON)
+ * Editorial changes
+ *
+ * Revision 1.73 2002/07/15 18:36:53 rwahl
+ * Editorial changes.
+ *
+ * Revision 1.72 2002/07/15 15:46:26 rschmidt
+ * Added new event: SK_HWEV_SET_SPEED
+ * Editorial changes
+ *
+ * Revision 1.71 2002/06/10 09:34:19 rschmidt
+ * Editorial changes
+ *
+ * Revision 1.70 2002/06/05 08:29:18 rschmidt
+ * SkXmRxTxEnable() replaced by SkMacRxTxEnable().
+ * Editorial changes.
+ *
+ * Revision 1.69 2002/04/25 13:03:49 rschmidt
+ * Changes for handling YUKON.
+ * Use of #ifdef OTHER_PHY to eliminate code for unused Phy types.
+ * Replaced all XMAC-access macros by functions: SkMacRxTxDisable(),
+ * SkMacIrqDisable().
+ * Added handling for GMAC FIFO in SkMacParity().
+ * Replaced all SkXm...() functions with SkMac...() to handle also
+ * YUKON's GMAC.
+ * Macros for XMAC PHY access PHY_READ(), PHY_WRITE() replaced
+ * by functions SkXmPhyRead(), SkXmPhyWrite().
+ * Disabling all PHY interrupts moved to SkMacIrqDisable().
+ * Added handling for GPHY IRQ in SkGeSirqIsr().
+ * Removed status parameter from MAC IRQ handler SkMacIrq().
+ * Added SkGePortCheckUpGmac(), SkPhyIsrGmac() for GMAC.
+ * Editorial changes
+ *
+ * Revision 1.68 2002/02/26 15:24:53 rwahl
+ * Fix: no link with manual configuration (#10673). The previous fix for
+ * #10639 was removed. So for RLMT mode = CLS the RLMT may switch to
+ * misconfigured port. It should not occur for the other RLMT modes.
+ *
+ * Revision 1.67 2001/11/20 09:19:58 rwahl
+ * Reworked bugfix #10639 (no dependency to RLMT mode).
+ *
+ * Revision 1.66 2001/10/26 07:52:53 afischer
+ * Port switching bug in `check local link` mode
+ *
+ * Revision 1.65 2001/02/23 13:41:51 gklug
+ * fix: PHYS2INST should be used correctly for Dual Net operation
+ * chg: do no longer work with older PNMI
+ *
+ * Revision 1.64 2001/02/15 11:27:04 rassmann
+ * Working with RLMT v1 if SK_MAX_NETS undefined.
+ *
+ * Revision 1.63 2001/02/06 10:44:23 mkunz
+ * - NetIndex added to interface functions of pnmi V4 with dual net support
+ *
+ * Revision 1.62 2001/01/31 15:31:41 gklug
+ * fix: problem with autosensing an SR8800 switch
+ *
+ * Revision 1.61 2000/11/09 11:30:09 rassmann
+ * WA: Waiting after releasing reset until BCom chip is accessible.
+ *
+ * Revision 1.60 2000/10/18 12:37:48 cgoos
+ * Reinserted the comment for version 1.56.
+ *
+ * Revision 1.59 2000/10/18 12:22:20 cgoos
+ * Added workaround for half duplex hangup.
+ *
+ * Revision 1.58 2000/09/28 13:06:04 gklug
+ * fix: BCom may NOT be touched if XMAC is in RESET state
+ *
+ * Revision 1.57 2000/09/08 12:38:39 cgoos
+ * Added forgotten variable declaration.
+ *
+ * Revision 1.56 2000/09/08 08:12:13 cgoos
+ * Changed handling of parity errors in SkGeHwErr (correct reset of error).
+ *
+ * Revision 1.55 2000/06/19 08:36:25 cgoos
+ * Changed comment.
+ *
+ * Revision 1.54 2000/05/22 08:45:57 malthoff
+ * Fix: #10523 is valid for all BCom PHYs.
+ *
+ * Revision 1.53 2000/05/19 10:20:30 cgoos
+ * Removed Solaris debug output code.
+ *
+ * Revision 1.52 2000/05/19 10:19:37 cgoos
+ * Added PHY state check in HWLinkDown.
+ * Move PHY interrupt code to IS_EXT_REG case in SkGeSirqIsr.
+ *
+ * Revision 1.51 2000/05/18 05:56:20 cgoos
+ * Fixed typo.
+ *
+ * Revision 1.50 2000/05/17 12:49:49 malthoff
+ * Fixes BCom link bugs (#10523).
+ *
+ * Revision 1.49 1999/12/17 11:02:50 gklug
+ * fix: read PHY_STAT of Broadcom chip more often to assure good status
+ *
+ * Revision 1.48 1999/12/06 10:01:17 cgoos
+ * Added SET function for Role.
+ *
+ * Revision 1.47 1999/11/22 13:34:24 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.46 1999/09/16 10:30:07 cgoos
+ * Removed debugging output statement from Linux.
+ *
+ * Revision 1.45 1999/09/16 07:32:55 cgoos
+ * Fixed dual-port copperfield bug (PHY_READ from resetted port).
+ * Removed some unused variables.
+ *
+ * Revision 1.44 1999/08/03 15:25:04 cgoos
+ * Removed workaround for disabled interrupts in half duplex mode.
+ *
+ * Revision 1.43 1999/08/03 14:27:58 cgoos
+ * Removed SENSE mode code from SkGePortCheckUpBcom.
+ *
+ * Revision 1.42 1999/07/26 09:16:54 cgoos
+ * Added some typecasts to avoid compiler warnings.
+ *
+ * Revision 1.41 1999/05/19 07:28:59 cgoos
+ * Changes for 1000Base-T.
+ *
+ * Revision 1.40 1999/04/08 13:59:39 gklug
+ * fix: problem with 3Com switches endless RESTARTs
+ *
+ * Revision 1.39 1999/03/08 10:10:52 gklug
+ * fix: AutoSensing did switch to next mode even if LiPa indicated offline
+ *
+ * Revision 1.38 1999/03/08 09:49:03 gklug
+ * fix: Bug using pAC instead of IoC, causing AIX problems
+ * fix: change compare for Linux compiler bug workaround
+ *
+ * Revision 1.37 1999/01/28 14:51:33 gklug
+ * fix: monitor for autosensing and extra RESETS the RX on wire counters
+ *
+ * Revision 1.36 1999/01/22 09:19:55 gklug
+ * fix: Init DupMode and InitPauseMd are now called in RxTxEnable
+ *
+ * Revision 1.35 1998/12/11 15:22:59 gklug
+ * chg: autosensing: check for receive if manual mode was guessed
+ * chg: simplified workaround for XMAC errata
+ * chg: wait additional 100 ms before link goes up.
+ * chg: autoneg timeout to 600 ms
+ * chg: restart autoneg even if configured to autonegotiation
+ *
+ * Revision 1.34 1998/12/10 10:33:14 gklug
+ * add: more debug messages
+ * fix: do a new InitPhy if link went down (AutoSensing problem)
+ * chg: Check for zero shorts if link is NOT up
+ * chg: reset Port if link goes down
+ * chg: wait additional 100 ms when link comes up to check shorts
+ * fix: dummy read extended autoneg status to prevent link going down immediately
+ *
+ * Revision 1.33 1998/12/07 12:18:29 gklug
+ * add: refinement of autosense mode: take into account the autoneg cap of LiPa
+ *
+ * Revision 1.32 1998/12/07 07:11:21 gklug
+ * fix: compiler warning
+ *
+ * Revision 1.31 1998/12/02 09:29:05 gklug
+ * fix: WA XMAC Errata: FCSCt check was not correct.
+ * fix: WA XMAC Errata: Prec Counter were NOT updated in case of short checks.
+ * fix: Clear Stat : now clears the Prev counters of all known Ports
+ *
+ * Revision 1.30 1998/12/01 10:54:15 gklug
+ * dd: workaround for XMAC errata changed. Check RX count and CRC err Count, too.
+ *
+ * Revision 1.29 1998/12/01 10:01:53 gklug
+ * fix: if MAC IRQ occurs during port down, this will be handled correctly
+ *
+ * Revision 1.28 1998/11/26 16:22:11 gklug
+ * fix: bug in autosense if manual modes are used
+ *
+ * Revision 1.27 1998/11/26 15:50:06 gklug
+ * fix: PNMI needs to set PLinkModeConf
+ *
+ * Revision 1.26 1998/11/26 14:51:58 gklug
+ * add: AutoSensing functionalty
+ *
+ * Revision 1.25 1998/11/26 07:34:37 gklug
+ * fix: Init PrevShorts when restarting port due to Link connection
+ *
+ * Revision 1.24 1998/11/25 10:57:32 gklug
+ * fix: remove unreferenced local vars
+ *
+ * Revision 1.23 1998/11/25 08:26:40 gklug
+ * fix: don't do a RESET on a starting or stopping port
+ *
+ * Revision 1.22 1998/11/24 13:29:44 gklug
+ * add: Workaround for MAC parity errata
+ *
+ * Revision 1.21 1998/11/18 15:31:06 gklug
+ * fix: lint bugs
+ *
+ * Revision 1.20 1998/11/18 12:58:54 gklug
+ * fix: use PNMI query instead of hardware access
+ *
+ * Revision 1.19 1998/11/18 12:54:55 gklug
+ * chg: add new workaround for XMAC Errata
+ * add: short event counter monitoring on active link too
+ *
+ * Revision 1.18 1998/11/13 14:27:41 malthoff
+ * Bug Fix: Packet Arbiter Timeout was not cleared correctly
+ * for timeout on TX1 and TX2.
+ *
+ * Revision 1.17 1998/11/04 07:01:59 cgoos
+ * Moved HW link poll sequence.
+ * Added call to SkXmRxTxEnable.
+ *
+ * Revision 1.16 1998/11/03 13:46:03 gklug
+ * add: functionality of SET_LMODE and SET_FLOW_MODE
+ * fix: send RLMT LinkDown event when Port stop is given with LinkUp
+ *
+ * Revision 1.15 1998/11/03 12:56:47 gklug
+ * fix: Needs more events
+ *
+ * Revision 1.14 1998/10/30 07:36:35 gklug
+ * rmv: unnecessary code
+ *
+ * Revision 1.13 1998/10/29 15:21:57 gklug
+ * add: Poll link feature for activating HW link
+ * fix: Deactivate HWLink when Port STOP is given
+ *
+ * Revision 1.12 1998/10/28 07:38:57 cgoos
+ * Checking link status at begin of SkHWLinkUp.
+ *
+ * Revision 1.11 1998/10/22 09:46:50 gklug
+ * fix SysKonnectFileId typo
+ *
+ * Revision 1.10 1998/10/14 13:57:47 gklug
+ * add: Port start/stop event
+ *
+ * Revision 1.9 1998/10/14 05:48:29 cgoos
+ * Added definition for Para.
+ *
+ * Revision 1.8 1998/10/14 05:40:09 gklug
+ * add: Hardware Linkup signal used
+ *
+ * Revision 1.7 1998/10/09 06:50:20 malthoff
+ * Remove ID_sccs by SysKonnectFileId.
+ *
+ * Revision 1.6 1998/10/08 09:11:49 gklug
+ * add: clear IRQ commands
+ *
+ * Revision 1.5 1998/10/02 14:27:35 cgoos
+ * Fixed some typos and wrong event names.
+ *
+ * Revision 1.4 1998/10/02 06:24:17 gklug
+ * add: HW error function
+ * fix: OUT macros
+ *
+ * Revision 1.3 1998/10/01 07:03:00 gklug
+ * add: ISR for the usual interrupt source register
+ *
+ * Revision 1.2 1998/09/03 13:50:33 gklug
+ * add: function prototypes
+ *
+ * Revision 1.1 1998/08/27 11:50:21 gklug
+ * initial revision
+ *
+ *
+ *
+ ******************************************************************************/
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+/*
+ * Special Interrupt handler
+ *
+ * The following abstract should show how this module is included
+ * in the driver path:
+ *
+ * In the ISR of the driver the bits for frame transmission complete and
+ * for receive complete are checked and handled by the driver itself.
+ * The bits of the slow path mask are checked after that and then the
+ * entry into the so-called "slow path" is prepared. It is an implementors
+ * decision whether this is executed directly or just scheduled by
+ * disabling the mask. In the interrupt service routine some events may be
+ * generated, so it would be a good idea to call the EventDispatcher
+ * right after this ISR.
+ *
+ * The Interrupt source register of the adapter is NOT read by this module.
+ * SO if the drivers implementor needs a while loop around the
+ * slow data paths interrupt bits, he needs to call the SkGeSirqIsr() for
+ * each loop entered.
+ *
+ * However, the MAC Interrupt status registers are read in a while loop.
+ *
+ */
+
+static const char SysKonnectFileId[] =
+ "$Id: skgesirq.c,v 1.83 2003/02/05 15:10:59 rschmidt Exp $" ;
+
+#include "h/skdrv1st.h" /* Driver Specific Definitions */
+#include "h/skgepnmi.h" /* PNMI Definitions */
+#include "h/skrlmt.h" /* RLMT Definitions */
+#include "h/skdrv2nd.h" /* Adapter Control and Driver specific Def. */
+
+/* local function prototypes */
+static int SkGePortCheckUpXmac(SK_AC*, SK_IOC, int);
+static int SkGePortCheckUpBcom(SK_AC*, SK_IOC, int);
+static int SkGePortCheckUpGmac(SK_AC*, SK_IOC, int);
+static void SkPhyIsrBcom(SK_AC*, SK_IOC, int, SK_U16);
+static void SkPhyIsrGmac(SK_AC*, SK_IOC, int, SK_U16);
+#ifdef OTHER_PHY
+static int SkGePortCheckUpLone(SK_AC*, SK_IOC, int);
+static int SkGePortCheckUpNat(SK_AC*, SK_IOC, int);
+static void SkPhyIsrLone(SK_AC*, SK_IOC, int, SK_U16);
+#endif /* OTHER_PHY */
+
+/*
+ * array of Rx counter from XMAC which are checked
+ * in AutoSense mode to check whether a link is not able to auto-negotiate.
+ */
+static const SK_U16 SkGeRxRegs[]= {
+ XM_RXF_64B,
+ XM_RXF_127B,
+ XM_RXF_255B,
+ XM_RXF_511B,
+ XM_RXF_1023B,
+ XM_RXF_MAX_SZ
+} ;
+
+#ifdef __C2MAN__
+/*
+ * Special IRQ function
+ *
+ * General Description:
+ *
+ */
+intro()
+{}
+#endif
+
+/* Define return codes of SkGePortCheckUp and CheckShort */
+#define SK_HW_PS_NONE 0 /* No action needed */
+#define SK_HW_PS_RESTART 1 /* Restart needed */
+#define SK_HW_PS_LINK 2 /* Link Up actions needed */
+
+/******************************************************************************
+ *
+ * SkHWInitDefSense() - Default Autosensing mode initialization
+ *
+ * Description: sets the PLinkMode for HWInit
+ *
+ * Returns: N/A
+ */
+static void SkHWInitDefSense(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ pPrt->PAutoNegTimeOut = 0;
+
+ if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) {
+ pPrt->PLinkMode = pPrt->PLinkModeConf;
+ return;
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("AutoSensing: First mode %d on Port %d\n",
+ (int)SK_LMODE_AUTOFULL, Port));
+
+ pPrt->PLinkMode = SK_LMODE_AUTOFULL;
+
+ return;
+} /* SkHWInitDefSense */
+
+
+/******************************************************************************
+ *
+ * SkHWSenseGetNext() - Get Next Autosensing Mode
+ *
+ * Description: gets the appropriate next mode
+ *
+ * Note:
+ *
+ */
+SK_U8 SkHWSenseGetNext(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ pPrt->PAutoNegTimeOut = 0;
+
+ if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) {
+ /* Leave all as configured */
+ return(pPrt->PLinkModeConf);
+ }
+
+ if (pPrt->PLinkMode == SK_LMODE_AUTOFULL) {
+ /* Return next mode AUTOBOTH */
+ return(SK_LMODE_AUTOBOTH);
+ }
+
+ /* Return default autofull */
+ return(SK_LMODE_AUTOFULL);
+} /* SkHWSenseGetNext */
+
+
+/******************************************************************************
+ *
+ * SkHWSenseSetNext() - Autosensing Set next mode
+ *
+ * Description: sets the appropriate next mode
+ *
+ * Returns: N/A
+ */
+void SkHWSenseSetNext(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_U8 NewMode) /* New Mode to be written in sense mode */
+{
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ pPrt->PAutoNegTimeOut = 0;
+
+ if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) {
+ return;
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("AutoSensing: next mode %d on Port %d\n",
+ (int)NewMode, Port));
+
+ pPrt->PLinkMode = NewMode;
+
+ return;
+} /* SkHWSenseSetNext */
+
+
+/******************************************************************************
+ *
+ * SkHWLinkDown() - Link Down handling
+ *
+ * Description: handles the hardware link down signal
+ *
+ * Returns: N/A
+ */
+void SkHWLinkDown(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* Disable all MAC interrupts */
+ SkMacIrqDisable(pAC, IoC, Port);
+
+ /* Disable Receiver and Transmitter */
+ SkMacRxTxDisable(pAC, IoC, Port);
+
+ /* Init default sense mode */
+ SkHWInitDefSense(pAC, IoC, Port);
+
+ if (!pPrt->PHWLinkUp) {
+ return;
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Link down Port %d\n", Port));
+
+ /* Set Link to DOWN */
+ pPrt->PHWLinkUp = SK_FALSE;
+
+ /* Reset Port stati */
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_UNKNOWN;
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
+ pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_INDETERMINATED;
+
+ /* Re-init Phy especially when the AutoSense default is set now */
+ SkMacInitPhy(pAC, IoC, Port, SK_FALSE);
+
+ /* GP0: used for workaround of Rev. C Errata 2 */
+
+ /* Do NOT signal to RLMT */
+
+ /* Do NOT start the timer here */
+} /* SkHWLinkDown */
+
+
+/******************************************************************************
+ *
+ * SkHWLinkUp() - Link Up handling
+ *
+ * Description: handles the hardware link up signal
+ *
+ * Returns: N/A
+ */
+void SkHWLinkUp(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (pPrt->PHWLinkUp) {
+ /* We do NOT need to proceed on active link */
+ return;
+ }
+
+ pPrt->PHWLinkUp = SK_TRUE;
+ pPrt->PAutoNegFail = SK_FALSE;
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_UNKNOWN;
+
+ if (pPrt->PLinkMode != SK_LMODE_AUTOHALF &&
+ pPrt->PLinkMode != SK_LMODE_AUTOFULL &&
+ pPrt->PLinkMode != SK_LMODE_AUTOBOTH) {
+ /* Link is up and no Auto-negotiation should be done */
+
+ /* Link speed should be the configured one */
+ switch (pPrt->PLinkSpeed) {
+ case SK_LSPEED_AUTO:
+ /* default is 1000 Mbps */
+ case SK_LSPEED_1000MBPS:
+ pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_1000MBPS;
+ break;
+ case SK_LSPEED_100MBPS:
+ pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_100MBPS;
+ break;
+ case SK_LSPEED_10MBPS:
+ pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_10MBPS;
+ break;
+ }
+
+ /* Set Link Mode Status */
+ if (pPrt->PLinkMode == SK_LMODE_FULL) {
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_FULL;
+ }
+ else {
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_HALF;
+ }
+
+ /* No flow control without auto-negotiation */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
+
+ /* enable Rx/Tx */
+ SkMacRxTxEnable(pAC, IoC, Port);
+ }
+} /* SkHWLinkUp */
+
+
+/******************************************************************************
+ *
+ * SkMacParity() - MAC parity workaround
+ *
+ * Description: handles MAC parity errors correctly
+ *
+ * Returns: N/A
+ */
+static void SkMacParity(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index of the port failed */
+{
+ SK_EVPARA Para;
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+ SK_U32 TxMax; /* TxMax Counter */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* Clear IRQ Tx Parity Error */
+ if (pAC->GIni.GIGenesis) {
+ SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_PERR);
+ }
+ else {
+ /* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */
+ SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T),
+ (SK_U8)((pAC->GIni.GIChipRev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE));
+ }
+
+ if (pPrt->PCheckPar) {
+ if (Port == MAC_1) {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E016, SKERR_SIRQ_E016MSG);
+ }
+ else {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E017, SKERR_SIRQ_E017MSG);
+ }
+ Para.Para64 = Port;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+ Para.Para32[0] = Port;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+
+ return;
+ }
+
+ /* Check whether frames with a size of 1k were sent */
+ if (pAC->GIni.GIGenesis) {
+ /* Snap statistic counters */
+ (void)SkXmUpdateStats(pAC, IoC, Port);
+
+ (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXF_MAX_SZ, &TxMax);
+ }
+ else {
+ (void)SkGmMacStatistic(pAC, IoC, Port, GM_TXF_1518B, &TxMax);
+ }
+
+ if (TxMax > 0) {
+ /* From now on check the parity */
+ pPrt->PCheckPar = SK_TRUE;
+ }
+} /* SkMacParity */
+
+
+/******************************************************************************
+ *
+ * SkGeHwErr() - Hardware Error service routine
+ *
+ * Description: handles all HW Error interrupts
+ *
+ * Returns: N/A
+ */
+static void SkGeHwErr(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+SK_U32 HwStatus) /* Interrupt status word */
+{
+ SK_EVPARA Para;
+ SK_U16 Word;
+
+ if ((HwStatus & (IS_IRQ_MST_ERR | IS_IRQ_STAT)) != 0) {
+ /* PCI Errors occured */
+ if ((HwStatus & IS_IRQ_STAT) != 0) {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E013, SKERR_SIRQ_E013MSG);
+ }
+ else {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E012, SKERR_SIRQ_E012MSG);
+ }
+
+ /* Reset all bits in the PCI STATUS register */
+ SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
+
+ SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS);
+ SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ Para.Para64 = 0;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
+ }
+
+ if (pAC->GIni.GIGenesis) {
+ if ((HwStatus & IS_NO_STAT_M1) != 0) {
+ /* Ignore it */
+ /* This situation is also indicated in the descriptor */
+ SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INSTAT);
+ }
+
+ if ((HwStatus & IS_NO_STAT_M2) != 0) {
+ /* Ignore it */
+ /* This situation is also indicated in the descriptor */
+ SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INSTAT);
+ }
+
+ if ((HwStatus & IS_NO_TIST_M1) != 0) {
+ /* Ignore it */
+ /* This situation is also indicated in the descriptor */
+ SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INTIST);
+ }
+
+ if ((HwStatus & IS_NO_TIST_M2) != 0) {
+ /* Ignore it */
+ /* This situation is also indicated in the descriptor */
+ SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INTIST);
+ }
+ }
+ else { /* YUKON */
+ /* This is necessary only for Rx timing measurements */
+ if ((HwStatus & IS_IRQ_TIST_OV) != 0) {
+ /* Clear Time Stamp Timer IRQ */
+ SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_CLR_IRQ);
+ }
+
+ if ((HwStatus & IS_IRQ_SENSOR) != 0) {
+ /* Clear I2C IRQ */
+ SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
+ }
+ }
+
+ if ((HwStatus & IS_RAM_RD_PAR) != 0) {
+ SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_RD_PERR);
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E014, SKERR_SIRQ_E014MSG);
+ Para.Para64 = 0;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
+ }
+
+ if ((HwStatus & IS_RAM_WR_PAR) != 0) {
+ SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_WR_PERR);
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E015, SKERR_SIRQ_E015MSG);
+ Para.Para64 = 0;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
+ }
+
+ if ((HwStatus & IS_M1_PAR_ERR) != 0) {
+ SkMacParity(pAC, IoC, MAC_1);
+ }
+
+ if ((HwStatus & IS_M2_PAR_ERR) != 0) {
+ SkMacParity(pAC, IoC, MAC_2);
+ }
+
+ if ((HwStatus & IS_R1_PAR_ERR) != 0) {
+ /* Clear IRQ */
+ SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_P);
+
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E018, SKERR_SIRQ_E018MSG);
+ Para.Para64 = MAC_1;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+ Para.Para32[0] = MAC_1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+ }
+
+ if ((HwStatus & IS_R2_PAR_ERR) != 0) {
+ /* Clear IRQ */
+ SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_P);
+
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E019, SKERR_SIRQ_E019MSG);
+ Para.Para64 = MAC_2;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+ Para.Para32[0] = MAC_2;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+ }
+} /* SkGeHwErr */
+
+
+/******************************************************************************
+ *
+ * SkGeSirqIsr() - Special Interrupt Service Routine
+ *
+ * Description: handles all non data transfer specific interrupts (slow path)
+ *
+ * Returns: N/A
+ */
+void SkGeSirqIsr(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+SK_U32 Istatus) /* Interrupt status word */
+{
+ SK_EVPARA Para;
+ SK_U32 RegVal32; /* Read register value */
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+ unsigned Len;
+ SK_U64 Octets;
+ SK_U16 PhyInt;
+ SK_U16 PhyIMsk;
+ int i;
+
+ if ((Istatus & IS_HW_ERR) != 0) {
+ /* read the HW Error Interrupt source */
+ SK_IN32(IoC, B0_HWE_ISRC, &RegVal32);
+
+ SkGeHwErr(pAC, IoC, RegVal32);
+ }
+
+ /*
+ * Packet Timeout interrupts
+ */
+ /* Check whether MACs are correctly initialized */
+ if (((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) != 0) &&
+ pAC->GIni.GP[MAC_1].PState == SK_PRT_RESET) {
+ /* MAC 1 was not initialized but Packet timeout occured */
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004,
+ SKERR_SIRQ_E004MSG);
+ }
+
+ if (((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) != 0) &&
+ pAC->GIni.GP[MAC_2].PState == SK_PRT_RESET) {
+ /* MAC 2 was not initialized but Packet timeout occured */
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005,
+ SKERR_SIRQ_E005MSG);
+ }
+
+ if ((Istatus & IS_PA_TO_RX1) != 0) {
+ /* Means network is filling us up */
+ SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E002,
+ SKERR_SIRQ_E002MSG);
+ SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX1);
+ }
+
+ if ((Istatus & IS_PA_TO_RX2) != 0) {
+ /* Means network is filling us up */
+ SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E003,
+ SKERR_SIRQ_E003MSG);
+ SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX2);
+ }
+
+ if ((Istatus & IS_PA_TO_TX1) != 0) {
+
+ pPrt = &pAC->GIni.GP[0];
+
+ /* May be a normal situation in a server with a slow network */
+ SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX1);
+
+ /*
+ * workaround: if in half duplex mode, check for Tx hangup.
+ * Read number of TX'ed bytes, wait for 10 ms, then compare
+ * the number with current value. If nothing changed, we assume
+ * that Tx is hanging and do a FIFO flush (see event routine).
+ */
+ if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
+ pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
+ !pPrt->HalfDupTimerActive) {
+ /*
+ * many more pack. arb. timeouts may come in between,
+ * we ignore those
+ */
+ pPrt->HalfDupTimerActive = SK_TRUE;
+
+ Len = sizeof(SK_U64);
+ SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets,
+ &Len, (SK_U32) SK_PNMI_PORT_PHYS2INST(pAC, 0),
+ pAC->Rlmt.Port[0].Net->NetNumber);
+
+ pPrt->LastOctets = Octets;
+
+ Para.Para32[0] = 0;
+ SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME,
+ SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para);
+ }
+ }
+
+ if ((Istatus & IS_PA_TO_TX2) != 0) {
+
+ pPrt = &pAC->GIni.GP[1];
+
+ /* May be a normal situation in a server with a slow network */
+ SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX2);
+
+ /* workaround: see above */
+ if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
+ pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
+ !pPrt->HalfDupTimerActive) {
+ pPrt->HalfDupTimerActive = SK_TRUE;
+
+ Len = sizeof(SK_U64);
+ SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets,
+ &Len, (SK_U32) SK_PNMI_PORT_PHYS2INST(pAC, 1),
+ pAC->Rlmt.Port[1].Net->NetNumber);
+
+ pPrt->LastOctets = Octets;
+
+ Para.Para32[0] = 1;
+ SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME,
+ SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para);
+ }
+ }
+
+ /* Check interrupts of the particular queues */
+ if ((Istatus & IS_R1_C) != 0) {
+ /* Clear IRQ */
+ SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_C);
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E006,
+ SKERR_SIRQ_E006MSG);
+ Para.Para64 = MAC_1;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+ Para.Para32[0] = MAC_1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+ }
+
+ if ((Istatus & IS_R2_C) != 0) {
+ /* Clear IRQ */
+ SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_C);
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E007,
+ SKERR_SIRQ_E007MSG);
+ Para.Para64 = MAC_2;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+ Para.Para32[0] = MAC_2;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+ }
+
+ if ((Istatus & IS_XS1_C) != 0) {
+ /* Clear IRQ */
+ SK_OUT32(IoC, B0_XS1_CSR, CSR_IRQ_CL_C);
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E008,
+ SKERR_SIRQ_E008MSG);
+ Para.Para64 = MAC_1;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+ Para.Para32[0] = MAC_1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+ }
+
+ if ((Istatus & IS_XA1_C) != 0) {
+ /* Clear IRQ */
+ SK_OUT32(IoC, B0_XA1_CSR, CSR_IRQ_CL_C);
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E009,
+ SKERR_SIRQ_E009MSG);
+ Para.Para64 = MAC_1;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+ Para.Para32[0] = MAC_1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+ }
+
+ if ((Istatus & IS_XS2_C) != 0) {
+ /* Clear IRQ */
+ SK_OUT32(IoC, B0_XS2_CSR, CSR_IRQ_CL_C);
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E010,
+ SKERR_SIRQ_E010MSG);
+ Para.Para64 = MAC_2;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+ Para.Para32[0] = MAC_2;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+ }
+
+ if ((Istatus & IS_XA2_C) != 0) {
+ /* Clear IRQ */
+ SK_OUT32(IoC, B0_XA2_CSR, CSR_IRQ_CL_C);
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E011,
+ SKERR_SIRQ_E011MSG);
+ Para.Para64 = MAC_2;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+ Para.Para32[0] = MAC_2;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+ }
+
+ /* External reg interrupt */
+ if ((Istatus & IS_EXT_REG) != 0) {
+ /* Test IRQs from PHY */
+ for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+
+ pPrt = &pAC->GIni.GP[i];
+
+ if (pPrt->PState == SK_PRT_RESET) {
+ continue;
+ }
+
+ switch (pPrt->PhyType) {
+
+ case SK_PHY_XMAC:
+ break;
+
+ case SK_PHY_BCOM:
+ SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_STAT, &PhyInt);
+ SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_MASK, &PhyIMsk);
+
+ if ((PhyInt & ~PhyIMsk) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Port %d Bcom Int: 0x%04X Mask: 0x%04X\n",
+ i, PhyInt, PhyIMsk));
+ SkPhyIsrBcom(pAC, IoC, i, PhyInt);
+ }
+ break;
+
+ case SK_PHY_MARV_COPPER:
+ case SK_PHY_MARV_FIBER:
+ SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_STAT, &PhyInt);
+ SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_MASK, &PhyIMsk);
+
+ if ((PhyInt & PhyIMsk) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Port %d Marv Int: 0x%04X Mask: 0x%04X\n",
+ i, PhyInt, PhyIMsk));
+ SkPhyIsrGmac(pAC, IoC, i, PhyInt);
+ }
+ break;
+
+#ifdef OTHER_PHY
+ case SK_PHY_LONE:
+ SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_STAT, &PhyInt);
+ SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_ENAB, &PhyIMsk);
+
+ if ((PhyInt & PhyIMsk) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Port %d Lone Int: %x Mask: %x\n",
+ i, PhyInt, PhyIMsk));
+ SkPhyIsrLone(pAC, IoC, i, PhyInt);
+ }
+ break;
+ case SK_PHY_NAT:
+ /* todo: National */
+ break;
+#endif /* OTHER_PHY */
+ }
+ }
+ }
+
+ /* I2C Ready interrupt */
+ if ((Istatus & IS_I2C_READY) != 0) {
+ SkI2cIsr(pAC, IoC);
+ }
+
+ if ((Istatus & IS_LNK_SYNC_M1) != 0) {
+ /*
+ * We do NOT need the Link Sync interrupt, because it shows
+ * us only a link going down.
+ */
+ /* clear interrupt */
+ SK_OUT8(IoC, MR_ADDR(MAC_1, LNK_SYNC_CTRL), LED_CLR_IRQ);
+ }
+
+ /* Check MAC after link sync counter */
+ if ((Istatus & IS_MAC1) != 0) {
+ /* IRQ from MAC 1 */
+ SkMacIrq(pAC, IoC, MAC_1);
+ }
+
+ if ((Istatus & IS_LNK_SYNC_M2) != 0) {
+ /*
+ * We do NOT need the Link Sync interrupt, because it shows
+ * us only a link going down.
+ */
+ /* clear interrupt */
+ SK_OUT8(IoC, MR_ADDR(MAC_2, LNK_SYNC_CTRL), LED_CLR_IRQ);
+ }
+
+ /* Check MAC after link sync counter */
+ if ((Istatus & IS_MAC2) != 0) {
+ /* IRQ from MAC 2 */
+ SkMacIrq(pAC, IoC, MAC_2);
+ }
+
+ /* Timer interrupt (served last) */
+ if ((Istatus & IS_TIMINT) != 0) {
+ SkHwtIsr(pAC, IoC);
+ }
+} /* SkGeSirqIsr */
+
+
+/******************************************************************************
+ *
+ * SkGePortCheckShorts() - Implementing XMAC Workaround Errata # 2
+ *
+ * return:
+ * 0 o.k. nothing needed
+ * 1 Restart needed on this port
+ */
+static int SkGePortCheckShorts(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO Context */
+int Port) /* Which port should be checked */
+{
+ SK_U32 Shorts; /* Short Event Counter */
+ SK_U32 CheckShorts; /* Check value for Short Event Counter */
+ SK_U64 RxCts; /* Rx Counter (packets on network) */
+ SK_U32 RxTmp; /* Rx temp. Counter */
+ SK_U32 FcsErrCts; /* FCS Error Counter */
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+ int Rtv; /* Return value */
+ int i;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* Default: no action */
+ Rtv = SK_HW_PS_NONE;
+
+ (void)SkXmUpdateStats(pAC, IoC, Port);
+
+ /* Extra precaution: check for short Event counter */
+ (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts);
+
+ /*
+ * Read Rx counter (packets seen on the network and not necessarily
+ * really received.
+ */
+ RxCts = 0;
+
+ for (i = 0; i < sizeof(SkGeRxRegs)/sizeof(SkGeRxRegs[0]); i++) {
+ (void)SkXmMacStatistic(pAC, IoC, Port, SkGeRxRegs[i], &RxTmp);
+ RxCts += (SK_U64)RxTmp;
+ }
+
+ /* On default: check shorts against zero */
+ CheckShorts = 0;
+
+ /* Extra precaution on active links */
+ if (pPrt->PHWLinkUp) {
+ /* Reset Link Restart counter */
+ pPrt->PLinkResCt = 0;
+ pPrt->PAutoNegTOCt = 0;
+
+ /* If link is up check for 2 */
+ CheckShorts = 2;
+
+ (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXF_FCS_ERR, &FcsErrCts);
+
+ if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
+ pPrt->PLipaAutoNeg == SK_LIPA_UNKNOWN &&
+ (pPrt->PLinkMode == SK_LMODE_HALF ||
+ pPrt->PLinkMode == SK_LMODE_FULL)) {
+ /*
+ * This is autosensing and we are in the fallback
+ * manual full/half duplex mode.
+ */
+ if (RxCts == pPrt->PPrevRx) {
+ /* Nothing received, restart link */
+ pPrt->PPrevFcs = FcsErrCts;
+ pPrt->PPrevShorts = Shorts;
+
+ return(SK_HW_PS_RESTART);
+ }
+ else {
+ pPrt->PLipaAutoNeg = SK_LIPA_MANUAL;
+ }
+ }
+
+ if (((RxCts - pPrt->PPrevRx) > pPrt->PRxLim) ||
+ (!(FcsErrCts - pPrt->PPrevFcs))) {
+ /*
+ * Note: The compare with zero above has to be done the way shown,
+ * otherwise the Linux driver will have a problem.
+ */
+ /*
+ * We received a bunch of frames or no CRC error occured on the
+ * network -> ok.
+ */
+ pPrt->PPrevRx = RxCts;
+ pPrt->PPrevFcs = FcsErrCts;
+ pPrt->PPrevShorts = Shorts;
+
+ return(SK_HW_PS_NONE);
+ }
+
+ pPrt->PPrevFcs = FcsErrCts;
+ }
+
+
+ if ((Shorts - pPrt->PPrevShorts) > CheckShorts) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Short Event Count Restart Port %d \n", Port));
+ Rtv = SK_HW_PS_RESTART;
+ }
+
+ pPrt->PPrevShorts = Shorts;
+ pPrt->PPrevRx = RxCts;
+
+ return(Rtv);
+} /* SkGePortCheckShorts */
+
+
+/******************************************************************************
+ *
+ * SkGePortCheckUp() - Check if the link is up
+ *
+ * return:
+ * 0 o.k. nothing needed
+ * 1 Restart needed on this port
+ * 2 Link came up
+ */
+static int SkGePortCheckUp(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO Context */
+int Port) /* Which port should be checked */
+{
+ switch (pAC->GIni.GP[Port].PhyType) {
+ case SK_PHY_XMAC:
+ return(SkGePortCheckUpXmac(pAC, IoC, Port));
+ case SK_PHY_BCOM:
+ return(SkGePortCheckUpBcom(pAC, IoC, Port));
+ case SK_PHY_MARV_COPPER:
+ case SK_PHY_MARV_FIBER:
+ return(SkGePortCheckUpGmac(pAC, IoC, Port));
+#ifdef OTHER_PHY
+ case SK_PHY_LONE:
+ return(SkGePortCheckUpLone(pAC, IoC, Port));
+ case SK_PHY_NAT:
+ return(SkGePortCheckUpNat(pAC, IoC, Port));
+#endif /* OTHER_PHY */
+ }
+ return(SK_HW_PS_NONE);
+} /* SkGePortCheckUp */
+
+
+/******************************************************************************
+ *
+ * SkGePortCheckUpXmac() - Implementing of the Workaround Errata # 2
+ *
+ * return:
+ * 0 o.k. nothing needed
+ * 1 Restart needed on this port
+ * 2 Link came up
+ */
+static int SkGePortCheckUpXmac(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO Context */
+int Port) /* Which port should be checked */
+{
+ SK_U32 Shorts; /* Short Event Counter */
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+ int Done;
+ SK_U32 GpReg; /* General Purpose register value */
+ SK_U16 Isrc; /* Interrupt source register */
+ SK_U16 IsrcSum; /* Interrupt source register sum */
+ SK_U16 LpAb; /* Link Partner Ability */
+ SK_U16 ResAb; /* Resolved Ability */
+ SK_U16 ExtStat; /* Extended Status Register */
+ SK_BOOL AutoNeg; /* Is Auto-negotiation used ? */
+ SK_U8 NextMode; /* Next AutoSensing Mode */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (pPrt->PHWLinkUp) {
+ if (pPrt->PhyType != SK_PHY_XMAC) {
+ return(SK_HW_PS_NONE);
+ }
+ else {
+ return(SkGePortCheckShorts(pAC, IoC, Port));
+ }
+ }
+
+ IsrcSum = pPrt->PIsave;
+ pPrt->PIsave = 0;
+
+ /* Now wait for each port's link */
+ if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+ AutoNeg = SK_FALSE;
+ }
+ else {
+ AutoNeg = SK_TRUE;
+ }
+
+ if (pPrt->PLinkBroken) {
+ /* Link was broken */
+ XM_IN32(IoC, Port, XM_GP_PORT, &GpReg);
+
+ if ((GpReg & XM_GP_INP_ASS) == 0) {
+ /* The Link is in sync */
+ XM_IN16(IoC, Port, XM_ISRC, &Isrc);
+ IsrcSum |= Isrc;
+ SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);
+
+ if ((Isrc & XM_IS_INP_ASS) == 0) {
+ /* It has been in sync since last time */
+ /* Restart the PORT */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Link in sync Restart Port %d\n", Port));
+
+ (void)SkXmUpdateStats(pAC, IoC, Port);
+
+ /* We now need to reinitialize the PrevShorts counter */
+ (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts);
+ pPrt->PPrevShorts = Shorts;
+
+ pPrt->PLinkBroken = SK_FALSE;
+
+ /*
+ * Link Restart Workaround:
+ * it may be possible that the other Link side
+ * restarts its link as well an we detect
+ * another LinkBroken. To prevent this
+ * happening we check for a maximum number
+ * of consecutive restart. If those happens,
+ * we do NOT restart the active link and
+ * check whether the link is now o.k.
+ */
+ pPrt->PLinkResCt++;
+
+ pPrt->PAutoNegTimeOut = 0;
+
+ if (pPrt->PLinkResCt < SK_MAX_LRESTART) {
+ return(SK_HW_PS_RESTART);
+ }
+
+ pPrt->PLinkResCt = 0;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Do NOT restart on Port %d %x %x\n", Port, Isrc, IsrcSum));
+ }
+ else {
+ pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Save Sync/nosync Port %d %x %x\n", Port, Isrc, IsrcSum));
+
+ /* Do nothing more if link is broken */
+ return(SK_HW_PS_NONE);
+ }
+ }
+ else {
+ /* Do nothing more if link is broken */
+ return(SK_HW_PS_NONE);
+ }
+
+ }
+ else {
+ /* Link was not broken, check if it is */
+ XM_IN16(IoC, Port, XM_ISRC, &Isrc);
+ IsrcSum |= Isrc;
+ if ((Isrc & XM_IS_INP_ASS) != 0) {
+ XM_IN16(IoC, Port, XM_ISRC, &Isrc);
+ IsrcSum |= Isrc;
+ if ((Isrc & XM_IS_INP_ASS) != 0) {
+ XM_IN16(IoC, Port, XM_ISRC, &Isrc);
+ IsrcSum |= Isrc;
+ if ((Isrc & XM_IS_INP_ASS) != 0) {
+ pPrt->PLinkBroken = SK_TRUE;
+ /* Re-Init Link partner Autoneg flag */
+ pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Link broken Port %d\n", Port));
+
+ /* Cable removed-> reinit sense mode */
+ SkHWInitDefSense(pAC, IoC, Port);
+
+ return(SK_HW_PS_RESTART);
+ }
+ }
+ }
+ else {
+ SkXmAutoNegLipaXmac(pAC, IoC, Port, Isrc);
+ if (SkGePortCheckShorts(pAC, IoC, Port) == SK_HW_PS_RESTART) {
+ return(SK_HW_PS_RESTART);
+ }
+ }
+ }
+
+ /*
+ * here we usually can check whether the link is in sync and
+ * auto-negotiation is done.
+ */
+ XM_IN32(IoC, Port, XM_GP_PORT, &GpReg);
+ XM_IN16(IoC, Port, XM_ISRC, &Isrc);
+ IsrcSum |= Isrc;
+
+ SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);
+
+ if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) {
+ if ((GpReg & XM_GP_INP_ASS) == 0) {
+ /* Save Auto-negotiation Done interrupt only if link is in sync */
+ pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND);
+ }
+#ifdef DEBUG
+ if ((pPrt->PIsave & XM_IS_AND) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg done rescheduled Port %d\n", Port));
+ }
+#endif /* DEBUG */
+ return(SK_HW_PS_NONE);
+ }
+
+ if (AutoNeg) {
+ if ((IsrcSum & XM_IS_AND) != 0) {
+ SkHWLinkUp(pAC, IoC, Port);
+ Done = SkMacAutoNegDone(pAC, IoC, Port);
+ if (Done != SK_AND_OK) {
+ /* Get PHY parameters, for debugging only */
+ SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LpAb);
+ SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n",
+ Port, LpAb, ResAb));
+
+ /* Try next possible mode */
+ NextMode = SkHWSenseGetNext(pAC, IoC, Port);
+ SkHWLinkDown(pAC, IoC, Port);
+ if (Done == SK_AND_DUP_CAP) {
+ /* GoTo next mode */
+ SkHWSenseSetNext(pAC, IoC, Port, NextMode);
+ }
+
+ return(SK_HW_PS_RESTART);
+ }
+ /*
+ * Dummy Read extended status to prevent extra link down/ups
+ * (clear Page Received bit if set)
+ */
+ SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_EXP, &ExtStat);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg done Port %d\n", Port));
+ return(SK_HW_PS_LINK);
+ }
+
+ /* AutoNeg not done, but HW link is up. Check for timeouts */
+ pPrt->PAutoNegTimeOut++;
+ if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
+ /* Increase the Timeout counter */
+ pPrt->PAutoNegTOCt++;
+
+ /* Timeout occured */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("AutoNeg timeout Port %d\n", Port));
+ if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
+ pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
+ /* Set Link manually up */
+ SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Set manual full duplex Port %d\n", Port));
+ }
+
+ if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
+ pPrt->PLipaAutoNeg == SK_LIPA_AUTO &&
+ pPrt->PAutoNegTOCt >= SK_MAX_ANEG_TO) {
+ /*
+ * This is rather complicated.
+ * we need to check here whether the LIPA_AUTO
+ * we saw before is false alert. We saw at one
+ * switch ( SR8800) that on boot time it sends
+ * just one auto-neg packet and does no further
+ * auto-negotiation.
+ * Solution: we restart the autosensing after
+ * a few timeouts.
+ */
+ pPrt->PAutoNegTOCt = 0;
+ pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
+ SkHWInitDefSense(pAC, IoC, Port);
+ }
+
+ /* Do the restart */
+ return(SK_HW_PS_RESTART);
+ }
+ }
+ else {
+ /* Link is up and we don't need more */
+#ifdef DEBUG
+ if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("ERROR: Lipa auto detected on port %d\n", Port));
+ }
+#endif /* DEBUG */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Link sync(GP), Port %d\n", Port));
+ SkHWLinkUp(pAC, IoC, Port);
+
+ /*
+ * Link sync (GP) and so assume a good connection. But if not received
+ * a bunch of frames received in a time slot (maybe broken tx cable)
+ * the port is restart.
+ */
+ return(SK_HW_PS_LINK);
+ }
+
+ return(SK_HW_PS_NONE);
+} /* SkGePortCheckUpXmac */
+
+
+/******************************************************************************
+ *
+ * SkGePortCheckUpBcom() - Check if the link is up on Bcom PHY
+ *
+ * return:
+ * 0 o.k. nothing needed
+ * 1 Restart needed on this port
+ * 2 Link came up
+ */
+static int SkGePortCheckUpBcom(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO Context */
+int Port) /* Which port should be checked */
+{
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+ int Done;
+ SK_U16 Isrc; /* Interrupt source register */
+ SK_U16 PhyStat; /* Phy Status Register */
+ SK_U16 ResAb; /* Master/Slave resolution */
+ SK_U16 Ctrl; /* Broadcom control flags */
+#ifdef DEBUG
+ SK_U16 LpAb;
+ SK_U16 ExtStat;
+#endif /* DEBUG */
+ SK_BOOL AutoNeg; /* Is Auto-negotiation used ? */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* Check for No HCD Link events (#10523) */
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &Isrc);
+
+#ifdef xDEBUG
+ if ((Isrc & ~(PHY_B_IS_HCT | PHY_B_IS_LCT) ==
+ (PHY_B_IS_SCR_S_ER | PHY_B_IS_RRS_CHANGE | PHY_B_IS_LRS_CHANGE)) {
+
+ SK_U32 Stat1, Stat2, Stat3;
+
+ Stat1 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1);
+ CMSMPrintString(
+ pAC->pConfigTable,
+ MSG_TYPE_RUNTIME_INFO,
+ "CheckUp1 - Stat: %x, Mask: %x",
+ (void *)Isrc,
+ (void *)Stat1);
+
+ Stat1 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1);
+ Stat2 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &Stat2);
+ Stat1 = Stat1 << 16 | Stat2;
+ Stat2 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2);
+ Stat3 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3);
+ Stat2 = Stat2 << 16 | Stat3;
+ CMSMPrintString(
+ pAC->pConfigTable,
+ MSG_TYPE_RUNTIME_INFO,
+ "Ctrl/Stat: %x, AN Adv/LP: %x",
+ (void *)Stat1,
+ (void *)Stat2);
+
+ Stat1 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1);
+ Stat2 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2);
+ Stat1 = Stat1 << 16 | Stat2;
+ Stat2 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2);
+ Stat3 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &Stat3);
+ Stat2 = Stat2 << 16 | Stat3;
+ CMSMPrintString(
+ pAC->pConfigTable,
+ MSG_TYPE_RUNTIME_INFO,
+ "AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x",
+ (void *)Stat1,
+ (void *)Stat2);
+
+ Stat1 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1);
+ Stat2 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2);
+ Stat1 = Stat1 << 16 | Stat2;
+ Stat2 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2);
+ Stat3 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3);
+ Stat2 = Stat2 << 16 | Stat3;
+ CMSMPrintString(
+ pAC->pConfigTable,
+ MSG_TYPE_RUNTIME_INFO,
+ "PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x",
+ (void *)Stat1,
+ (void *)Stat2);
+ }
+#endif /* DEBUG */
+
+ if ((Isrc & (PHY_B_IS_NO_HDCL /* | PHY_B_IS_NO_HDC */)) != 0) {
+ /*
+ * Workaround BCom Errata:
+ * enable and disable loopback mode if "NO HCD" occurs.
+ */
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Ctrl);
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL,
+ (SK_U16)(Ctrl | PHY_CT_LOOP));
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL,
+ (SK_U16)(Ctrl & ~PHY_CT_LOOP));
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("No HCD Link event, Port %d\n", Port));
+#ifdef xDEBUG
+ CMSMPrintString(
+ pAC->pConfigTable,
+ MSG_TYPE_RUNTIME_INFO,
+ "No HCD link event, port %d.",
+ (void *)Port,
+ (void *)NULL);
+#endif /* DEBUG */
+ }
+
+ /* Not obsolete: link status bit is latched to 0 and autoclearing! */
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
+
+ if (pPrt->PHWLinkUp) {
+ return(SK_HW_PS_NONE);
+ }
+
+#ifdef xDEBUG
+ {
+ SK_U32 Stat1, Stat2, Stat3;
+
+ Stat1 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1);
+ CMSMPrintString(
+ pAC->pConfigTable,
+ MSG_TYPE_RUNTIME_INFO,
+ "CheckUp1a - Stat: %x, Mask: %x",
+ (void *)Isrc,
+ (void *)Stat1);
+
+ Stat1 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1);
+ Stat2 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
+ Stat1 = Stat1 << 16 | PhyStat;
+ Stat2 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2);
+ Stat3 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3);
+ Stat2 = Stat2 << 16 | Stat3;
+ CMSMPrintString(
+ pAC->pConfigTable,
+ MSG_TYPE_RUNTIME_INFO,
+ "Ctrl/Stat: %x, AN Adv/LP: %x",
+ (void *)Stat1,
+ (void *)Stat2);
+
+ Stat1 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1);
+ Stat2 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2);
+ Stat1 = Stat1 << 16 | Stat2;
+ Stat2 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2);
+ Stat3 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
+ Stat2 = Stat2 << 16 | ResAb;
+ CMSMPrintString(
+ pAC->pConfigTable,
+ MSG_TYPE_RUNTIME_INFO,
+ "AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x",
+ (void *)Stat1,
+ (void *)Stat2);
+
+ Stat1 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1);
+ Stat2 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2);
+ Stat1 = Stat1 << 16 | Stat2;
+ Stat2 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2);
+ Stat3 = 0;
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3);
+ Stat2 = Stat2 << 16 | Stat3;
+ CMSMPrintString(
+ pAC->pConfigTable,
+ MSG_TYPE_RUNTIME_INFO,
+ "PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x",
+ (void *)Stat1,
+ (void *)Stat2);
+ }
+#endif /* DEBUG */
+
+ /* Now wait for each port's link */
+ if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+ AutoNeg = SK_FALSE;
+ }
+ else {
+ AutoNeg = SK_TRUE;
+ }
+
+ /*
+ * Here we usually can check whether the link is in sync and
+ * auto-negotiation is done.
+ */
+
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
+
+ SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg: %d, PhyStat: 0x%04x\n", AutoNeg, PhyStat));
+
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
+
+ if ((ResAb & PHY_B_1000S_MSF) != 0) {
+ /* Error */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Master/Slave Fault port %d\n", Port));
+ pPrt->PAutoNegFail = SK_TRUE;
+ pPrt->PMSStatus = SK_MS_STAT_FAULT;
+
+ return(SK_HW_PS_RESTART);
+ }
+
+ if ((PhyStat & PHY_ST_LSYNC) == 0) {
+ return(SK_HW_PS_NONE);
+ }
+
+ pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
+ SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg: %d, PhyStat: 0x%04x\n", AutoNeg, PhyStat));
+
+ if (AutoNeg) {
+ if ((PhyStat & PHY_ST_AN_OVER) != 0) {
+ SkHWLinkUp(pAC, IoC, Port);
+ Done = SkMacAutoNegDone(pAC, IoC, Port);
+ if (Done != SK_AND_OK) {
+#ifdef DEBUG
+ /* Get PHY parameters, for debugging only */
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LpAb);
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ExtStat);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
+ Port, LpAb, ExtStat));
+#endif /* DEBUG */
+ return(SK_HW_PS_RESTART);
+ }
+ else {
+#ifdef xDEBUG
+ /* Dummy read ISR to prevent extra link downs/ups */
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat);
+
+ if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) {
+ CMSMPrintString(
+ pAC->pConfigTable,
+ MSG_TYPE_RUNTIME_INFO,
+ "CheckUp2 - Stat: %x",
+ (void *)ExtStat,
+ (void *)NULL);
+ }
+#endif /* DEBUG */
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg done Port %d\n", Port));
+ return(SK_HW_PS_LINK);
+ }
+ }
+ }
+ else { /* !AutoNeg */
+ /* Link is up and we don't need more. */
+#ifdef DEBUG
+ if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("ERROR: Lipa auto detected on port %d\n", Port));
+ }
+#endif /* DEBUG */
+
+#ifdef xDEBUG
+ /* Dummy read ISR to prevent extra link downs/ups */
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat);
+
+ if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) {
+ CMSMPrintString(
+ pAC->pConfigTable,
+ MSG_TYPE_RUNTIME_INFO,
+ "CheckUp3 - Stat: %x",
+ (void *)ExtStat,
+ (void *)NULL);
+ }
+#endif /* DEBUG */
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Link sync(GP), Port %d\n", Port));
+ SkHWLinkUp(pAC, IoC, Port);
+ return(SK_HW_PS_LINK);
+ }
+
+ return(SK_HW_PS_NONE);
+} /* SkGePortCheckUpBcom */
+
+
+/******************************************************************************
+ *
+ * SkGePortCheckUpGmac() - Check if the link is up on Marvell PHY
+ *
+ * return:
+ * 0 o.k. nothing needed
+ * 1 Restart needed on this port
+ * 2 Link came up
+ */
+static int SkGePortCheckUpGmac(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO Context */
+int Port) /* Which port should be checked */
+{
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+ int Done;
+ SK_U16 Isrc; /* Interrupt source */
+ SK_U16 PhyStat; /* Phy Status */
+ SK_U16 PhySpecStat;/* Phy Specific Status */
+ SK_U16 ResAb; /* Master/Slave resolution */
+ SK_BOOL AutoNeg; /* Is Auto-negotiation used ? */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* Read PHY Interrupt Status */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &Isrc);
+
+ if ((Isrc & PHY_M_IS_AN_COMPL) != 0) {
+ /* TBD */
+ }
+
+ if ((Isrc & PHY_M_IS_DOWNSH_DET) != 0) {
+ /* TBD */
+ }
+
+ if (pPrt->PHWLinkUp) {
+ return(SK_HW_PS_NONE);
+ }
+
+ /* Now wait for each port's link */
+ if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+ AutoNeg = SK_FALSE;
+ }
+ else {
+ AutoNeg = SK_TRUE;
+ }
+
+ /* Read PHY Status */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg: %d, PhyStat: 0x%04x\n", AutoNeg, PhyStat));
+
+ SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
+
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb);
+
+ if ((ResAb & PHY_B_1000S_MSF) != 0) {
+ /* Error */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Master/Slave Fault port %d\n", Port));
+ pPrt->PAutoNegFail = SK_TRUE;
+ pPrt->PMSStatus = SK_MS_STAT_FAULT;
+
+ return(SK_HW_PS_RESTART);
+ }
+
+ /* Read PHY Specific Status */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg: %d, PhySpecStat: 0x%04x\n", AutoNeg, PhySpecStat));
+
+ if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) {
+ return(SK_HW_PS_NONE);
+ }
+
+ pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
+ SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
+
+ pPrt->PCableLen = (SK_U8)((PhySpecStat & PHY_M_PS_CABLE_MSK) >> 7);
+
+ if (AutoNeg) {
+ /* Auto-Negotiation Over ? */
+ if ((PhyStat & PHY_ST_AN_OVER) != 0) {
+
+ SkHWLinkUp(pAC, IoC, Port);
+
+ Done = SkMacAutoNegDone(pAC, IoC, Port);
+
+ if (Done != SK_AND_OK) {
+ return(SK_HW_PS_RESTART);
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg done Port %d\n", Port));
+ return(SK_HW_PS_LINK);
+ }
+ }
+ else { /* !AutoNeg */
+ /* Link is up and we don't need more */
+#ifdef DEBUG
+ if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("ERROR: Lipa auto detected on port %d\n", Port));
+ }
+#endif /* DEBUG */
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Link sync, Port %d\n", Port));
+ SkHWLinkUp(pAC, IoC, Port);
+
+ return(SK_HW_PS_LINK);
+ }
+
+ return(SK_HW_PS_NONE);
+} /* SkGePortCheckUpGmac */
+
+
+#ifdef OTHER_PHY
+/******************************************************************************
+ *
+ * SkGePortCheckUpLone() - Check if the link is up on Level One PHY
+ *
+ * return:
+ * 0 o.k. nothing needed
+ * 1 Restart needed on this port
+ * 2 Link came up
+ */
+static int SkGePortCheckUpLone(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO Context */
+int Port) /* Which port should be checked */
+{
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+ int Done;
+ SK_U16 Isrc; /* Interrupt source register */
+ SK_U16 LpAb; /* Link Partner Ability */
+ SK_U16 ExtStat; /* Extended Status Register */
+ SK_U16 PhyStat; /* Phy Status Register */
+ SK_U16 StatSum;
+ SK_BOOL AutoNeg; /* Is Auto-negotiation used ? */
+ SK_U8 NextMode; /* Next AutoSensing Mode */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (pPrt->PHWLinkUp) {
+ return(SK_HW_PS_NONE);
+ }
+
+ StatSum = pPrt->PIsave;
+ pPrt->PIsave = 0;
+
+ /* Now wait for each ports link */
+ if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+ AutoNeg = SK_FALSE;
+ }
+ else {
+ AutoNeg = SK_TRUE;
+ }
+
+ /*
+ * here we usually can check whether the link is in sync and
+ * auto-negotiation is done.
+ */
+ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_STAT, &PhyStat);
+ StatSum |= PhyStat;
+
+ SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
+
+ if ((PhyStat & PHY_ST_LSYNC) == 0) {
+ /* Save Auto-negotiation Done bit */
+ pPrt->PIsave = (SK_U16)(StatSum & PHY_ST_AN_OVER);
+#ifdef DEBUG
+ if ((pPrt->PIsave & PHY_ST_AN_OVER) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg done rescheduled Port %d\n", Port));
+ }
+#endif /* DEBUG */
+ return(SK_HW_PS_NONE);
+ }
+
+ if (AutoNeg) {
+ if ((StatSum & PHY_ST_AN_OVER) != 0) {
+ SkHWLinkUp(pAC, IoC, Port);
+ Done = SkMacAutoNegDone(pAC, IoC, Port);
+ if (Done != SK_AND_OK) {
+ /* Get PHY parameters, for debugging only */
+ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LpAb);
+ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ExtStat);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
+ Port, LpAb, ExtStat));
+
+ /* Try next possible mode */
+ NextMode = SkHWSenseGetNext(pAC, IoC, Port);
+ SkHWLinkDown(pAC, IoC, Port);
+ if (Done == SK_AND_DUP_CAP) {
+ /* GoTo next mode */
+ SkHWSenseSetNext(pAC, IoC, Port, NextMode);
+ }
+
+ return(SK_HW_PS_RESTART);
+
+ }
+ else {
+ /*
+ * Dummy Read interrupt status to prevent
+ * extra link down/ups
+ */
+ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNeg done Port %d\n", Port));
+ return(SK_HW_PS_LINK);
+ }
+ }
+
+ /* AutoNeg not done, but HW link is up. Check for timeouts */
+ pPrt->PAutoNegTimeOut++;
+ if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
+ /* Timeout occured */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("AutoNeg timeout Port %d\n", Port));
+ if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
+ pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
+ /* Set Link manually up */
+ SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Set manual full duplex Port %d\n", Port));
+ }
+
+ /* Do the restart */
+ return(SK_HW_PS_RESTART);
+ }
+ }
+ else {
+ /* Link is up and we don't need more */
+#ifdef DEBUG
+ if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("ERROR: Lipa auto detected on port %d\n", Port));
+ }
+#endif /* DEBUG */
+
+ /*
+ * Dummy Read interrupt status to prevent
+ * extra link down/ups
+ */
+ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("Link sync(GP), Port %d\n", Port));
+ SkHWLinkUp(pAC, IoC, Port);
+ return(SK_HW_PS_LINK);
+ }
+
+ return(SK_HW_PS_NONE);
+} /* SkGePortCheckUpLone */
+
+
+/******************************************************************************
+ *
+ * SkGePortCheckUpNat() - Check if the link is up on National PHY
+ *
+ * return:
+ * 0 o.k. nothing needed
+ * 1 Restart needed on this port
+ * 2 Link came up
+ */
+static int SkGePortCheckUpNat(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO Context */
+int Port) /* Which port should be checked */
+{
+ /* todo: National */
+ return(SK_HW_PS_NONE);
+} /* SkGePortCheckUpNat */
+#endif /* OTHER_PHY */
+
+
+/******************************************************************************
+ *
+ * SkGeSirqEvent() - Event Service Routine
+ *
+ * Description:
+ *
+ * Notes:
+ */
+int SkGeSirqEvent(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* Io Context */
+SK_U32 Event, /* Module specific Event */
+SK_EVPARA Para) /* Event specific Parameter */
+{
+ SK_U64 Octets;
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+ SK_U32 Port;
+ SK_U32 Time;
+ unsigned Len;
+ int PortStat;
+ SK_U8 Val8;
+
+ Port = Para.Para32[0];
+ pPrt = &pAC->GIni.GP[Port];
+
+ switch (Event) {
+ case SK_HWEV_WATIM:
+ /* Check whether port came up */
+ PortStat = SkGePortCheckUp(pAC, IoC, Port);
+
+ switch (PortStat) {
+ case SK_HW_PS_RESTART:
+ if (pPrt->PHWLinkUp) {
+ /*
+ * Set Link to down.
+ */
+ SkHWLinkDown(pAC, IoC, Port);
+
+ /*
+ * Signal directly to RLMT to ensure correct
+ * sequence of SWITCH and RESET event.
+ */
+ SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
+ }
+
+ /* Restart needed */
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
+ break;
+
+ case SK_HW_PS_LINK:
+ /* Signal to RLMT */
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_UP, Para);
+ break;
+
+ }
+
+ /* Start again the check Timer */
+ if (pPrt->PHWLinkUp) {
+ Time = SK_WA_ACT_TIME;
+ }
+ else {
+ Time = SK_WA_INA_TIME;
+ }
+
+ /* Todo: still needed for non-XMAC PHYs??? */
+ /* Start workaround Errata #2 timer */
+ SkTimerStart(pAC, IoC, &pPrt->PWaTimer, Time,
+ SKGE_HWAC, SK_HWEV_WATIM, Para);
+ break;
+
+ case SK_HWEV_PORT_START:
+ if (pPrt->PHWLinkUp) {
+ /*
+ * Signal directly to RLMT to ensure correct
+ * sequence of SWITCH and RESET event.
+ */
+ SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
+ }
+
+ SkHWLinkDown(pAC, IoC, Port);
+
+ /* Schedule Port RESET */
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
+
+ /* Start workaround Errata #2 timer */
+ SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
+ SKGE_HWAC, SK_HWEV_WATIM, Para);
+ break;
+
+ case SK_HWEV_PORT_STOP:
+ if (pPrt->PHWLinkUp) {
+ /*
+ * Signal directly to RLMT to ensure correct
+ * sequence of SWITCH and RESET event.
+ */
+ SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
+ }
+
+ /* Stop Workaround Timer */
+ SkTimerStop(pAC, IoC, &pPrt->PWaTimer);
+
+ SkHWLinkDown(pAC, IoC, Port);
+ break;
+
+ case SK_HWEV_UPDATE_STAT:
+ /* We do NOT need to update any statistics */
+ break;
+
+ case SK_HWEV_CLEAR_STAT:
+ /* We do NOT need to clear any statistics */
+ for (Port = 0; Port < (SK_U32)pAC->GIni.GIMacsFound; Port++) {
+ pPrt->PPrevRx = 0;
+ pPrt->PPrevFcs = 0;
+ pPrt->PPrevShorts = 0;
+ }
+ break;
+
+ case SK_HWEV_SET_LMODE:
+ Val8 = (SK_U8)Para.Para32[1];
+ if (pPrt->PLinkModeConf != Val8) {
+ /* Set New link mode */
+ pPrt->PLinkModeConf = Val8;
+
+ /* Restart Port */
+ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
+ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
+ }
+ break;
+
+ case SK_HWEV_SET_FLOWMODE:
+ Val8 = (SK_U8)Para.Para32[1];
+ if (pPrt->PFlowCtrlMode != Val8) {
+ /* Set New Flow Control mode */
+ pPrt->PFlowCtrlMode = Val8;
+
+ /* Restart Port */
+ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
+ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
+ }
+ break;
+
+ case SK_HWEV_SET_ROLE:
+ /* not possible for fiber */
+ if (!pAC->GIni.GICopperType) {
+ break;
+ }
+ Val8 = (SK_U8)Para.Para32[1];
+ if (pPrt->PMSMode != Val8) {
+ /* Set New link mode */
+ pPrt->PMSMode = Val8;
+
+ /* Restart Port */
+ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
+ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
+ }
+ break;
+
+ case SK_HWEV_SET_SPEED:
+ if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
+ break;
+ }
+ Val8 = (SK_U8)Para.Para32[1];
+ if (pPrt->PLinkSpeed != Val8) {
+ /* Set New Speed parameter */
+ pPrt->PLinkSpeed = Val8;
+
+ /* Restart Port */
+ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
+ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
+ }
+ break;
+
+ case SK_HWEV_HALFDUP_CHK:
+ /*
+ * half duplex hangup workaround.
+ * See packet arbiter timeout interrupt for description
+ */
+ pPrt->HalfDupTimerActive = SK_FALSE;
+ if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
+ pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) {
+
+ Len = sizeof(SK_U64);
+ SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets,
+ &Len, (SK_U32)SK_PNMI_PORT_PHYS2INST(pAC, Port),
+ pAC->Rlmt.Port[Port].Net->NetNumber);
+
+ if (pPrt->LastOctets == Octets) {
+ /* Tx hanging, a FIFO flush restarts it */
+ SkMacFlushTxFifo(pAC, IoC, Port);
+ }
+ }
+ break;
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001, SKERR_SIRQ_E001MSG);
+ break;
+ }
+
+ return(0);
+} /* SkGeSirqEvent */
+
+
+/******************************************************************************
+ *
+ * SkPhyIsrBcom() - PHY interrupt service routine
+ *
+ * Description: handles all interrupts from BCom PHY
+ *
+ * Returns: N/A
+ */
+static void SkPhyIsrBcom(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* Io Context */
+int Port, /* Port Num = PHY Num */
+SK_U16 IStatus) /* Interrupt Status */
+{
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+ SK_EVPARA Para;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if ((IStatus & PHY_B_IS_PSE) != 0) {
+ /* Incorrectable pair swap error */
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E022,
+ SKERR_SIRQ_E022MSG);
+ }
+
+ if ((IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) != 0) {
+ Para.Para32[0] = (SK_U32)Port;
+
+ SkHWLinkDown(pAC, IoC, Port);
+
+ /* Signal to RLMT */
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+
+ /* Start workaround Errata #2 timer */
+ SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
+ SKGE_HWAC, SK_HWEV_WATIM, Para);
+ }
+
+} /* SkPhyIsrBcom */
+
+
+/******************************************************************************
+ *
+ * SkPhyIsrGmac() - PHY interrupt service routine
+ *
+ * Description: handles all interrupts from Marvell PHY
+ *
+ * Returns: N/A
+ */
+static void SkPhyIsrGmac(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* Io Context */
+int Port, /* Port Num = PHY Num */
+SK_U16 IStatus) /* Interrupt Status */
+{
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+ SK_EVPARA Para;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if ((IStatus & (PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE)) != 0) {
+ Para.Para32[0] = (SK_U32)Port;
+
+ SkHWLinkDown(pAC, IoC, Port);
+
+ /* Signal to RLMT */
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+ }
+
+ if ((IStatus & PHY_M_IS_AN_ERROR) != 0) {
+ /* Auto-Negotiation Error */
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E023, SKERR_SIRQ_E023MSG);
+ }
+
+ if ((IStatus & PHY_M_IS_LSP_CHANGE) != 0) {
+ /* TBD */
+ }
+
+ if ((IStatus & PHY_M_IS_FIFO_ERROR) != 0) {
+ /* FIFO Overflow/Underrun Error */
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E024, SKERR_SIRQ_E024MSG);
+ }
+} /* SkPhyIsrGmac */
+
+
+#ifdef OTHER_PHY
+/******************************************************************************
+ *
+ * SkPhyIsrLone() - PHY interrupt service routine
+ *
+ * Description: handles all interrupts from LONE PHY
+ *
+ * Returns: N/A
+ */
+static void SkPhyIsrLone(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* Io Context */
+int Port, /* Port Num = PHY Num */
+SK_U16 IStatus) /* Interrupt Status */
+{
+ SK_EVPARA Para;
+
+ if (IStatus & (PHY_L_IS_DUP | PHY_L_IS_ISOL)) {
+ SkHWLinkDown(pAC, IoC, Port);
+
+ /* Signal to RLMT */
+ Para.Para32[0] = (SK_U32)Port;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+ }
+
+} /* SkPhyIsrLone */
+#endif /* OTHER_PHY */
+
+#endif /* CONFIG_SK98 */
+
+/* End of File */
diff --git a/drivers/net/sk98lin/ski2c.c b/drivers/net/sk98lin/ski2c.c
new file mode 100644
index 0000000..2ab635a
--- /dev/null
+++ b/drivers/net/sk98lin/ski2c.c
@@ -0,0 +1,1505 @@
+/******************************************************************************
+ *
+ * Name: ski2c.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.57 $
+ * Date: $Date: 2003/01/28 09:17:38 $
+ * Purpose: Functions to access Voltage and Temperature Sensor
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: ski2c.c,v $
+ * Revision 1.57 2003/01/28 09:17:38 rschmidt
+ * Fixed handling for sensors on YUKON Fiber.
+ * Editorial changes.
+ *
+ * Revision 1.56 2002/12/19 14:20:41 rschmidt
+ * Added debugging code in SkI2cWait().
+ * Replaced all I2C-write operations with function SkI2cWrite().
+ * Fixed compiler warning because of uninitialized 'Time' in SkI2cEvent().
+ * Editorial changes.
+ *
+ * Revision 1.55 2002/10/15 07:23:55 rschmidt
+ * Added setting of the GIYukon32Bit bool variable to distinguish
+ * 32-bit adapters.
+ * Editorial changes (TWSI).
+ *
+ * Revision 1.54 2002/08/13 09:05:06 rschmidt
+ * Added new thresholds if VAUX is not available (GIVauxAvail).
+ * Merged defines for PHY PLL 3V3 voltage (A and B).
+ * Editorial changes.
+ *
+ * Revision 1.53 2002/08/08 11:04:53 rwahl
+ * Added missing comment for revision 1.51
+ *
+ * Revision 1.52 2002/08/08 10:09:02 jschmalz
+ * Sensor init state caused wrong error log entry
+ *
+ * Revision 1.51 2002/08/06 09:43:03 jschmalz
+ * Extensions and changes for Yukon
+ *
+ * Revision 1.50 2002/08/02 12:09:22 rschmidt
+ * Added support for YUKON sensors.
+ * Editorial changes.
+ *
+ * Revision 1.49 2002/07/30 11:07:52 rschmidt
+ * Replaced MaxSens init by update for Copper in SkI2cInit1(),
+ * because it was already initialized in SkI2cInit0().
+ * Editorial changes.
+ *
+ * Revision 1.48 2001/08/16 12:44:33 afischer
+ * LM80 sensor init values corrected
+ *
+ * Revision 1.47 2001/04/05 11:38:09 rassmann
+ * Set SenState to idle in SkI2cWaitIrq().
+ * Changed error message in SkI2cWaitIrq().
+ *
+ * Revision 1.46 2001/04/02 14:03:35 rassmann
+ * Changed pAC to IoC in SK_IN32().
+ *
+ * Revision 1.45 2001/03/21 12:12:49 rassmann
+ * Resetting I2C_READY interrupt in SkI2cInit1().
+ *
+ * Revision 1.44 2000/08/07 15:49:03 gklug
+ * Fix: SK_INFAST only in NetWare driver.
+ *
+ * Revision 1.43 2000/08/03 14:28:17 rassmann
+ * Added function to wait for I2C being ready before resetting the board.
+ * Replaced one duplicate "out of range" message with correct one.
+ *
+ * Revision 1.42 1999/11/22 13:35:12 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.41 1999/09/14 14:11:30 malthoff
+ * The 1000BT Dual Link adapter has got only one Fan.
+ * The second Fan has been removed.
+ *
+ * Revision 1.40 1999/05/27 13:37:27 malthoff
+ * Set divisor of 1 for fan count calculation.
+ *
+ * Revision 1.39 1999/05/20 14:54:43 malthoff
+ * I2c.DummyReads is not used in Diagnostics.
+ *
+ * Revision 1.38 1999/05/20 09:20:56 cgoos
+ * Changes for 1000Base-T (up to 9 sensors and fans).
+ *
+ * Revision 1.37 1999/03/25 15:11:36 gklug
+ * fix: reset error flag if sensor reads correct value
+ *
+ * Revision 1.36 1999/01/07 14:11:16 gklug
+ * fix: break added
+ *
+ * Revision 1.35 1999/01/05 15:31:49 gklug
+ * fix: CLEAR STAT command is now added correctly
+ *
+ * Revision 1.34 1998/12/01 13:45:16 gklug
+ * fix: introduced Init level, because we don't need reinits
+ *
+ * Revision 1.33 1998/11/09 14:54:25 malthoff
+ * Modify I2C Transfer Timeout handling for Diagnostics.
+ *
+ * Revision 1.32 1998/11/03 06:54:35 gklug
+ * fix: Need dummy reads at the beginning to init sensors
+ *
+ * Revision 1.31 1998/11/03 06:42:42 gklug
+ * fix: select correctVIO range only if between warning levels
+ *
+ * Revision 1.30 1998/11/02 07:36:53 gklug
+ * fix: Error should not include WARNING message
+ *
+ * Revision 1.29 1998/10/30 15:07:43 malthoff
+ * Disable 'I2C does not compelete' error log for diagnostics.
+ *
+ * Revision 1.28 1998/10/22 09:48:11 gklug
+ * fix: SysKonnectFileId typo
+ *
+ * Revision 1.27 1998/10/20 09:59:46 gklug
+ * add: parameter to SkOsGetTime
+ *
+ * Revision 1.26 1998/10/09 06:10:59 malthoff
+ * Remove ID_sccs by SysKonnectFileId.
+ *
+ * Revision 1.25 1998/09/08 12:40:26 gklug
+ * fix: syntax error in if clause
+ *
+ * Revision 1.24 1998/09/08 12:19:42 gklug
+ * chg: INIT Level checking
+ *
+ * Revision 1.23 1998/09/08 07:37:20 gklug
+ * fix: log error if PCI_IO voltage sensor could not be initialized
+ *
+ * Revision 1.22 1998/09/04 08:30:03 malthoff
+ * Bugfixes during SK_DIAG testing:
+ * - correct NS2BCLK() macro
+ * - correct SkI2cSndDev()
+ * - correct SkI2cWait() loop waiting for an event
+ *
+ * Revision 1.21 1998/08/27 14:46:01 gklug
+ * chg: if-then-else replaced by switch
+ *
+ * Revision 1.20 1998/08/27 14:40:07 gklug
+ * test: integral types
+ *
+ * Revision 1.19 1998/08/25 07:51:54 gklug
+ * fix: typos for compiling
+ *
+ * Revision 1.18 1998/08/25 06:12:24 gklug
+ * add: count errors and warnings
+ * fix: check not the sensor state but the ErrFlag!
+ *
+ * Revision 1.17 1998/08/25 05:56:48 gklug
+ * add: CheckSensor function
+ *
+ * Revision 1.16 1998/08/20 11:41:10 gklug
+ * chg: omit STRCPY macro by using char * as Sensor Description
+ *
+ * Revision 1.15 1998/08/20 11:37:35 gklug
+ * chg: change Ioc to IoC
+ *
+ * Revision 1.14 1998/08/20 11:32:52 gklug
+ * fix: Para compile error
+ *
+ * Revision 1.13 1998/08/20 11:27:41 gklug
+ * fix: Compile bugs with new awrning constants
+ *
+ * Revision 1.12 1998/08/20 08:53:05 gklug
+ * fix: compiler errors
+ * add: Threshold values
+ *
+ * Revision 1.11 1998/08/19 12:39:22 malthoff
+ * Compiler Fix: Some names have changed.
+ *
+ * Revision 1.10 1998/08/19 12:20:56 gklug
+ * fix: remove struct from C files (see CCC)
+ *
+ * Revision 1.9 1998/08/19 06:28:46 malthoff
+ * SkOsGetTime returns SK_U64 now.
+ *
+ * Revision 1.8 1998/08/17 13:53:33 gklug
+ * fix: Parameter of event function and its result
+ *
+ * Revision 1.7 1998/08/17 07:02:15 malthoff
+ * Modify the functions for accessing the I2C SW Registers.
+ * Modify SkI2cWait().
+ * Put Lm80RcvReg into sklm80.c
+ * Remove Compiler Errors.
+ *
+ * Revision 1.6 1998/08/14 07:13:20 malthoff
+ * remove pAc with pAC
+ * remove smc with pAC
+ * change names to new convention
+ *
+ * Revision 1.5 1998/08/14 06:24:49 gklug
+ * add: init level 1 and 2
+ *
+ * Revision 1.4 1998/08/12 14:31:12 gklug
+ * add: error log for unknown event
+ *
+ * Revision 1.3 1998/08/12 13:37:04 gklug
+ * add: Init 0 function
+ *
+ * Revision 1.2 1998/08/11 07:27:15 gklug
+ * add: functions of the interface
+ * adapt rest of source to C coding Conventions
+ * rmv: unnecessary code taken from Mona Lisa
+ *
+ * Revision 1.1 1998/06/19 14:28:43 malthoff
+ * Created. Sources taken from ML Projekt.
+ * Sources have to be reworked for GE.
+ *
+ *
+ ******************************************************************************/
+
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+/*
+ * I2C Protocol
+ */
+static const char SysKonnectFileId[] =
+ "$Id: ski2c.c,v 1.57 2003/01/28 09:17:38 rschmidt Exp $";
+
+#include "h/skdrv1st.h" /* Driver Specific Definitions */
+#include "h/lm80.h"
+#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */
+
+#ifdef __C2MAN__
+/*
+ I2C protocol implementation.
+
+ General Description:
+
+ The I2C protocol is used for the temperature sensors and for
+ the serial EEPROM which hold the configuration.
+
+ This file covers functions that allow to read write and do
+ some bulk requests a specified I2C address.
+
+ The Genesis has 2 I2C buses. One for the EEPROM which holds
+ the VPD Data and one for temperature and voltage sensor.
+ The following picture shows the I2C buses, I2C devices and
+ their control registers.
+
+ Note: The VPD functions are in skvpd.c
+.
+. PCI Config I2C Bus for VPD Data:
+.
+. +------------+
+. | VPD EEPROM |
+. +------------+
+. |
+. | <-- I2C
+. |
+. +-----------+-----------+
+. | |
+. +-----------------+ +-----------------+
+. | PCI_VPD_ADR_REG | | PCI_VPD_DAT_REG |
+. +-----------------+ +-----------------+
+.
+.
+. I2C Bus for LM80 sensor:
+.
+. +-----------------+
+. | Temperature and |
+. | Voltage Sensor |
+. | LM80 |
+. +-----------------+
+. |
+. |
+. I2C --> |
+. |
+. +----+
+. +-------------->| OR |<--+
+. | +----+ |
+. +------+------+ |
+. | | |
+. +--------+ +--------+ +----------+
+. | B2_I2C | | B2_I2C | | B2_I2C |
+. | _CTRL | | _DATA | | _SW |
+. +--------+ +--------+ +----------+
+.
+ The I2C bus may be driven by the B2_I2C_SW or by the B2_I2C_CTRL
+ and B2_I2C_DATA registers.
+ For driver software it is recommended to use the I2C control and
+ data register, because I2C bus timing is done by the ASIC and
+ an interrupt may be received when the I2C request is completed.
+
+ Clock Rate Timing: MIN MAX generated by
+ VPD EEPROM: 50 kHz 100 kHz HW
+ LM80 over I2C Ctrl/Data reg. 50 kHz 100 kHz HW
+ LM80 over B2_I2C_SW register 0 400 kHz SW
+
+ Note: The clock generated by the hardware is dependend on the
+ PCI clock. If the PCI bus clock is 33 MHz, the I2C/VPD
+ clock is 50 kHz.
+ */
+intro()
+{}
+#endif
+
+#ifdef SK_DIAG
+/*
+ * I2C Fast Mode timing values used by the LM80.
+ * If new devices are added to the I2C bus the timing values have to be checked.
+ */
+#ifndef I2C_SLOW_TIMING
+#define T_CLK_LOW 1300L /* clock low time in ns */
+#define T_CLK_HIGH 600L /* clock high time in ns */
+#define T_DATA_IN_SETUP 100L /* data in Set-up Time */
+#define T_START_HOLD 600L /* start condition hold time */
+#define T_START_SETUP 600L /* start condition Set-up time */
+#define T_STOP_SETUP 600L /* stop condition Set-up time */
+#define T_BUS_IDLE 1300L /* time the bus must free after Tx */
+#define T_CLK_2_DATA_OUT 900L /* max. clock low to data output valid */
+#else /* I2C_SLOW_TIMING */
+/* I2C Standard Mode Timing */
+#define T_CLK_LOW 4700L /* clock low time in ns */
+#define T_CLK_HIGH 4000L /* clock high time in ns */
+#define T_DATA_IN_SETUP 250L /* data in Set-up Time */
+#define T_START_HOLD 4000L /* start condition hold time */
+#define T_START_SETUP 4700L /* start condition Set-up time */
+#define T_STOP_SETUP 4000L /* stop condition Set-up time */
+#define T_BUS_IDLE 4700L /* time the bus must free after Tx */
+#endif /* !I2C_SLOW_TIMING */
+
+#define NS2BCLK(x) (((x)*125)/10000)
+
+/*
+ * I2C Wire Operations
+ *
+ * About I2C_CLK_LOW():
+ *
+ * The Data Direction bit (I2C_DATA_DIR) has to be set to input when setting
+ * clock to low, to prevent the ASIC and the I2C data client from driving the
+ * serial data line simultaneously (ASIC: last bit of a byte = '1', I2C client
+ * send an 'ACK'). See also Concentrator Bugreport No. 10192.
+ */
+#define I2C_DATA_HIGH(IoC) SK_I2C_SET_BIT(IoC, I2C_DATA)
+#define I2C_DATA_LOW(IoC) SK_I2C_CLR_BIT(IoC, I2C_DATA)
+#define I2C_DATA_OUT(IoC) SK_I2C_SET_BIT(IoC, I2C_DATA_DIR)
+#define I2C_DATA_IN(IoC) SK_I2C_CLR_BIT(IoC, I2C_DATA_DIR | I2C_DATA)
+#define I2C_CLK_HIGH(IoC) SK_I2C_SET_BIT(IoC, I2C_CLK)
+#define I2C_CLK_LOW(IoC) SK_I2C_CLR_BIT(IoC, I2C_CLK | I2C_DATA_DIR)
+#define I2C_START_COND(IoC) SK_I2C_CLR_BIT(IoC, I2C_CLK)
+
+#define NS2CLKT(x) ((x*125L)/10000)
+
+/*--------------- I2C Interface Register Functions --------------- */
+
+/*
+ * sending one bit
+ */
+void SkI2cSndBit(
+SK_IOC IoC, /* I/O Context */
+SK_U8 Bit) /* Bit to send */
+{
+ I2C_DATA_OUT(IoC);
+ if (Bit) {
+ I2C_DATA_HIGH(IoC);
+ }
+ else {
+ I2C_DATA_LOW(IoC);
+ }
+ SkDgWaitTime(IoC, NS2BCLK(T_DATA_IN_SETUP));
+ I2C_CLK_HIGH(IoC);
+ SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH));
+ I2C_CLK_LOW(IoC);
+} /* SkI2cSndBit*/
+
+
+/*
+ * Signal a start to the I2C Bus.
+ *
+ * A start is signaled when data goes to low in a high clock cycle.
+ *
+ * Ends with Clock Low.
+ *
+ * Status: not tested
+ */
+void SkI2cStart(
+SK_IOC IoC) /* I/O Context */
+{
+ /* Init data and Clock to output lines */
+ /* Set Data high */
+ I2C_DATA_OUT(IoC);
+ I2C_DATA_HIGH(IoC);
+ /* Set Clock high */
+ I2C_CLK_HIGH(IoC);
+
+ SkDgWaitTime(IoC, NS2BCLK(T_START_SETUP));
+
+ /* Set Data Low */
+ I2C_DATA_LOW(IoC);
+
+ SkDgWaitTime(IoC, NS2BCLK(T_START_HOLD));
+
+ /* Clock low without Data to Input */
+ I2C_START_COND(IoC);
+
+ SkDgWaitTime(IoC, NS2BCLK(T_CLK_LOW));
+} /* SkI2cStart */
+
+
+void SkI2cStop(
+SK_IOC IoC) /* I/O Context */
+{
+ /* Init data and Clock to output lines */
+ /* Set Data low */
+ I2C_DATA_OUT(IoC);
+ I2C_DATA_LOW(IoC);
+
+ SkDgWaitTime(IoC, NS2BCLK(T_CLK_2_DATA_OUT));
+
+ /* Set Clock high */
+ I2C_CLK_HIGH(IoC);
+
+ SkDgWaitTime(IoC, NS2BCLK(T_STOP_SETUP));
+
+ /*
+ * Set Data High: Do it by setting the Data Line to Input.
+ * Because of a pull up resistor the Data Line
+ * floods to high.
+ */
+ I2C_DATA_IN(IoC);
+
+ /*
+ * When I2C activity is stopped
+ * o DATA should be set to input and
+ * o CLOCK should be set to high!
+ */
+ SkDgWaitTime(IoC, NS2BCLK(T_BUS_IDLE));
+} /* SkI2cStop */
+
+
+/*
+ * Receive just one bit via the I2C bus.
+ *
+ * Note: Clock must be set to LOW before calling this function.
+ *
+ * Returns The received bit.
+ */
+int SkI2cRcvBit(
+SK_IOC IoC) /* I/O Context */
+{
+ int Bit;
+ SK_U8 I2cSwCtrl;
+
+ /* Init data as input line */
+ I2C_DATA_IN(IoC);
+
+ SkDgWaitTime(IoC, NS2BCLK(T_CLK_2_DATA_OUT));
+
+ I2C_CLK_HIGH(IoC);
+
+ SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH));
+
+ SK_I2C_GET_SW(IoC, &I2cSwCtrl);
+
+ Bit = (I2cSwCtrl & I2C_DATA) ? 1 : 0;
+
+ I2C_CLK_LOW(IoC);
+ SkDgWaitTime(IoC, NS2BCLK(T_CLK_LOW-T_CLK_2_DATA_OUT));
+
+ return(Bit);
+} /* SkI2cRcvBit */
+
+
+/*
+ * Receive an ACK.
+ *
+ * returns 0 If acknowledged
+ * 1 in case of an error
+ */
+int SkI2cRcvAck(
+SK_IOC IoC) /* I/O Context */
+{
+ /*
+ * Received bit must be zero.
+ */
+ return(SkI2cRcvBit(IoC) != 0);
+} /* SkI2cRcvAck */
+
+
+/*
+ * Send an NACK.
+ */
+void SkI2cSndNAck(
+SK_IOC IoC) /* I/O Context */
+{
+ /*
+ * Received bit must be zero.
+ */
+ SkI2cSndBit(IoC, 1);
+} /* SkI2cSndNAck */
+
+
+/*
+ * Send an ACK.
+ */
+void SkI2cSndAck(
+SK_IOC IoC) /* I/O Context */
+{
+ /*
+ * Received bit must be zero.
+ *
+ */
+ SkI2cSndBit(IoC, 0);
+} /* SkI2cSndAck */
+
+
+/*
+ * Send one byte to the I2C device and wait for ACK.
+ *
+ * Return acknowleged status.
+ */
+int SkI2cSndByte(
+SK_IOC IoC, /* I/O Context */
+int Byte) /* byte to send */
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ if (Byte & (1<<(7-i))) {
+ SkI2cSndBit(IoC, 1);
+ }
+ else {
+ SkI2cSndBit(IoC, 0);
+ }
+ }
+
+ return(SkI2cRcvAck(IoC));
+} /* SkI2cSndByte */
+
+
+/*
+ * Receive one byte and ack it.
+ *
+ * Return byte.
+ */
+int SkI2cRcvByte(
+SK_IOC IoC, /* I/O Context */
+int Last) /* Last Byte Flag */
+{
+ int i;
+ int Byte = 0;
+
+ for (i = 0; i < 8; i++) {
+ Byte <<= 1;
+ Byte |= SkI2cRcvBit(IoC);
+ }
+
+ if (Last) {
+ SkI2cSndNAck(IoC);
+ }
+ else {
+ SkI2cSndAck(IoC);
+ }
+
+ return(Byte);
+} /* SkI2cRcvByte */
+
+
+/*
+ * Start dialog and send device address
+ *
+ * Return 0 if acknowleged, 1 in case of an error
+ */
+int SkI2cSndDev(
+SK_IOC IoC, /* I/O Context */
+int Addr, /* Device Address */
+int Rw) /* Read / Write Flag */
+{
+ SkI2cStart(IoC);
+ Rw = ~Rw;
+ Rw &= I2C_WRITE;
+ return(SkI2cSndByte(IoC, (Addr<<1) | Rw));
+} /* SkI2cSndDev */
+
+#endif /* SK_DIAG */
+
+/*----------------- I2C CTRL Register Functions ----------*/
+
+/*
+ * waits for a completion of an I2C transfer
+ *
+ * returns 0: success, transfer completes
+ * 1: error, transfer does not complete, I2C transfer
+ * killed, wait loop terminated.
+ */
+int SkI2cWait(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+int Event) /* complete event to wait for (I2C_READ or I2C_WRITE) */
+{
+ SK_U64 StartTime;
+ SK_U64 CurrentTime;
+ SK_U32 I2cCtrl;
+
+ StartTime = SkOsGetTime(pAC);
+
+ do {
+ CurrentTime = SkOsGetTime(pAC);
+
+ if (CurrentTime - StartTime > SK_TICKS_PER_SEC / 8) {
+
+ SK_I2C_STOP(IoC);
+#ifndef SK_DIAG
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E002, SKERR_I2C_E002MSG);
+#endif /* !SK_DIAG */
+ return(1);
+ }
+
+ SK_I2C_GET_CTL(IoC, &I2cCtrl);
+
+#ifdef xYUKON_DBG
+ printf("StartTime=%lu, CurrentTime=%lu\n",
+ StartTime, CurrentTime);
+ if (kbhit()) {
+ return(1);
+ }
+#endif /* YUKON_DBG */
+
+ } while ((I2cCtrl & I2C_FLAG) == (SK_U32)Event << 31);
+
+ return(0);
+} /* SkI2cWait */
+
+
+/*
+ * waits for a completion of an I2C transfer
+ *
+ * Returns
+ * Nothing
+ */
+void SkI2cWaitIrq(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC) /* I/O Context */
+{
+ SK_SENSOR *pSen;
+ SK_U64 StartTime;
+ SK_U32 IrqSrc;
+
+ pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
+
+ if (pSen->SenState == SK_SEN_IDLE) {
+ return;
+ }
+
+ StartTime = SkOsGetTime(pAC);
+ do {
+ if (SkOsGetTime(pAC) - StartTime > SK_TICKS_PER_SEC / 8) {
+ SK_I2C_STOP(IoC);
+#ifndef SK_DIAG
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E016, SKERR_I2C_E016MSG);
+#endif /* !SK_DIAG */
+ return;
+ }
+ SK_IN32(IoC, B0_ISRC, &IrqSrc);
+ } while ((IrqSrc & IS_I2C_READY) == 0);
+
+ pSen->SenState = SK_SEN_IDLE;
+ return;
+} /* SkI2cWaitIrq */
+
+/*
+ * writes a single byte or 4 bytes into the I2C device
+ *
+ * returns 0: success
+ * 1: error
+ */
+int SkI2cWrite(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 I2cData, /* I2C Data to write */
+int I2cDev, /* I2C Device Address */
+int I2cReg, /* I2C Device Register Address */
+int I2cBurst) /* I2C Burst Flag */
+{
+ SK_OUT32(IoC, B2_I2C_DATA, I2cData);
+ SK_I2C_CTL(IoC, I2C_WRITE, I2cDev, I2cReg, I2cBurst);
+
+ return(SkI2cWait(pAC, IoC, I2C_WRITE));
+} /* SkI2cWrite*/
+
+
+#ifdef SK_DIAG
+
+/*
+ * reads a single byte or 4 bytes from the I2C device
+ *
+ * returns the word read
+ */
+SK_U32 SkI2cRead(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+int I2cDev, /* I2C Device Address */
+int I2cReg, /* I2C Device Register Address */
+int I2cBurst) /* I2C Burst Flag */
+{
+ SK_U32 Data;
+
+ SK_OUT32(IoC, B2_I2C_DATA, 0);
+ SK_I2C_CTL(IoC, I2C_READ, I2cDev, I2cReg, I2cBurst);
+
+ if (SkI2cWait(pAC, IoC, I2C_READ) != 0) {
+ w_print("%s\n", SKERR_I2C_E002MSG);
+ }
+
+ SK_IN32(IoC, B2_I2C_DATA, &Data);
+ return(Data);
+} /* SkI2cRead */
+
+#endif /* SK_DIAG */
+
+
+/*
+ * read a sensor's value
+ *
+ * This function reads a sensor's value from the I2C sensor chip. The sensor
+ * is defined by its index into the sensors database in the struct pAC points
+ * to.
+ * Returns
+ * 1 if the read is completed
+ * 0 if the read must be continued (I2C Bus still allocated)
+ */
+int SkI2cReadSensor(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_SENSOR *pSen) /* Sensor to be read */
+{
+ if (pSen->SenRead != NULL) {
+ return((*pSen->SenRead)(pAC, IoC, pSen));
+ }
+ else
+ return(0); /* no success */
+} /* SkI2cReadSensor*/
+
+/*
+ * Do the Init state 0 initialization
+ */
+static int SkI2cInit0(
+SK_AC *pAC) /* Adapter Context */
+{
+ int i;
+
+ /* Begin with first sensor */
+ pAC->I2c.CurrSens = 0;
+
+ /* Begin with timeout control for state machine */
+ pAC->I2c.TimerMode = SK_TIMER_WATCH_STATEMACHINE;
+
+ /* Set sensor number to zero */
+ pAC->I2c.MaxSens = 0;
+
+#ifndef SK_DIAG
+ /* Initialize Number of Dummy Reads */
+ pAC->I2c.DummyReads = SK_MAX_SENSORS;
+#endif
+
+ for (i = 0; i < SK_MAX_SENSORS; i++) {
+ pAC->I2c.SenTable[i].SenDesc = "unknown";
+ pAC->I2c.SenTable[i].SenType = SK_SEN_UNKNOWN;
+ pAC->I2c.SenTable[i].SenThreErrHigh = 0;
+ pAC->I2c.SenTable[i].SenThreErrLow = 0;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = 0;
+ pAC->I2c.SenTable[i].SenThreWarnLow = 0;
+ pAC->I2c.SenTable[i].SenReg = LM80_FAN2_IN;
+ pAC->I2c.SenTable[i].SenInit = SK_SEN_DYN_INIT_NONE;
+ pAC->I2c.SenTable[i].SenValue = 0;
+ pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_NOT_PRESENT;
+ pAC->I2c.SenTable[i].SenErrCts = 0;
+ pAC->I2c.SenTable[i].SenBegErrTS = 0;
+ pAC->I2c.SenTable[i].SenState = SK_SEN_IDLE;
+ pAC->I2c.SenTable[i].SenRead = NULL;
+ pAC->I2c.SenTable[i].SenDev = 0;
+ }
+
+ /* Now we are "INIT data"ed */
+ pAC->I2c.InitLevel = SK_INIT_DATA;
+ return(0);
+} /* SkI2cInit0*/
+
+
+/*
+ * Do the init state 1 initialization
+ *
+ * initialize the following register of the LM80:
+ * Configuration register:
+ * - START, noINT, activeLOW, noINT#Clear, noRESET, noCI, noGPO#, noINIT
+ *
+ * Interrupt Mask Register 1:
+ * - all interrupts are Disabled (0xff)
+ *
+ * Interrupt Mask Register 2:
+ * - all interrupts are Disabled (0xff) Interrupt modi doesn't matter.
+ *
+ * Fan Divisor/RST_OUT register:
+ * - Divisors set to 1 (bits 00), all others 0s.
+ *
+ * OS# Configuration/Temperature resolution Register:
+ * - all 0s
+ *
+ */
+static int SkI2cInit1(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC) /* I/O Context */
+{
+ int i;
+ SK_U8 I2cSwCtrl;
+ SK_GEPORT *pPrt; /* GIni Port struct pointer */
+
+ if (pAC->I2c.InitLevel != SK_INIT_DATA) {
+ /* ReInit not needed in I2C module */
+ return(0);
+ }
+
+ /* Set the Direction of I2C-Data Pin to IN */
+ SK_I2C_CLR_BIT(IoC, I2C_DATA_DIR | I2C_DATA);
+ /* Check for 32-Bit Yukon with Low at I2C-Data Pin */
+ SK_I2C_GET_SW(IoC, &I2cSwCtrl);
+
+ if ((I2cSwCtrl & I2C_DATA) == 0) {
+ /* this is a 32-Bit board */
+ pAC->GIni.GIYukon32Bit = SK_TRUE;
+ return(0);
+ }
+
+ /* Check for 64 Bit Yukon without sensors */
+ if (SkI2cWrite(pAC, IoC, 0, LM80_ADDR, LM80_CFG, 0) != 0) {
+ return(0);
+ }
+
+ (void)SkI2cWrite(pAC, IoC, 0xff, LM80_ADDR, LM80_IMSK_1, 0);
+
+ (void)SkI2cWrite(pAC, IoC, 0xff, LM80_ADDR, LM80_IMSK_2, 0);
+
+ (void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, LM80_FAN_CTRL, 0);
+
+ (void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, LM80_TEMP_CTRL, 0);
+
+ (void)SkI2cWrite(pAC, IoC, LM80_CFG_START, LM80_ADDR, LM80_CFG, 0);
+
+ /*
+ * MaxSens has to be updated here, because PhyType is not
+ * set when performing Init Level 0
+ */
+ pAC->I2c.MaxSens = 5;
+
+ pPrt = &pAC->GIni.GP[0];
+
+ if (pAC->GIni.GIGenesis) {
+ if (pPrt->PhyType == SK_PHY_BCOM) {
+ if (pAC->GIni.GIMacsFound == 1) {
+ pAC->I2c.MaxSens += 1;
+ }
+ else {
+ pAC->I2c.MaxSens += 3;
+ }
+ }
+ }
+ else {
+ pAC->I2c.MaxSens += 3;
+ }
+
+ for (i = 0; i < pAC->I2c.MaxSens; i++) {
+ switch (i) {
+ case 0:
+ pAC->I2c.SenTable[i].SenDesc = "Temperature";
+ pAC->I2c.SenTable[i].SenType = SK_SEN_TEMP;
+ pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_TEMP_HIGH_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_TEMP_HIGH_WARN;
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_TEMP_LOW_WARN;
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_TEMP_LOW_ERR;
+ pAC->I2c.SenTable[i].SenReg = LM80_TEMP_IN;
+ break;
+ case 1:
+ pAC->I2c.SenTable[i].SenDesc = "Voltage PCI";
+ pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+ pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PCI_5V_HIGH_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PCI_5V_HIGH_WARN;
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PCI_5V_LOW_WARN;
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PCI_5V_LOW_ERR;
+ pAC->I2c.SenTable[i].SenReg = LM80_VT0_IN;
+ break;
+ case 2:
+ pAC->I2c.SenTable[i].SenDesc = "Voltage PCI-IO";
+ pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+ pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PCI_IO_5V_HIGH_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PCI_IO_5V_HIGH_WARN;
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PCI_IO_3V3_LOW_WARN;
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PCI_IO_3V3_LOW_ERR;
+ pAC->I2c.SenTable[i].SenReg = LM80_VT1_IN;
+ pAC->I2c.SenTable[i].SenInit = SK_SEN_DYN_INIT_PCI_IO;
+ break;
+ case 3:
+ pAC->I2c.SenTable[i].SenDesc = "Voltage ASIC";
+ pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+ pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_VDD_HIGH_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_VDD_HIGH_WARN;
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VDD_LOW_WARN;
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VDD_LOW_ERR;
+ pAC->I2c.SenTable[i].SenReg = LM80_VT2_IN;
+ break;
+ case 4:
+ if (pAC->GIni.GIGenesis) {
+ if (pPrt->PhyType == SK_PHY_BCOM) {
+ pAC->I2c.SenTable[i].SenDesc = "Voltage PHY A PLL";
+ pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN;
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN;
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR;
+ }
+ else {
+ pAC->I2c.SenTable[i].SenDesc = "Voltage PMA";
+ pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN;
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN;
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR;
+ }
+ }
+ else {
+ pAC->I2c.SenTable[i].SenDesc = "Voltage VAUX";
+ pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_VAUX_3V3_HIGH_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_VAUX_3V3_HIGH_WARN;
+ if (pAC->GIni.GIVauxAvail) {
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VAUX_3V3_LOW_WARN;
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VAUX_3V3_LOW_ERR;
+ }
+ else {
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VAUX_0V_WARN_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VAUX_0V_WARN_ERR;
+ }
+ }
+ pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+ pAC->I2c.SenTable[i].SenReg = LM80_VT3_IN;
+ break;
+ case 5:
+ if (pAC->GIni.GIGenesis) {
+ pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 2V5";
+ pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PHY_2V5_HIGH_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PHY_2V5_HIGH_WARN;
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PHY_2V5_LOW_WARN;
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PHY_2V5_LOW_ERR;
+ }
+ else {
+ pAC->I2c.SenTable[i].SenDesc = "Voltage ASIC-Co 1V5";
+ pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_CORE_1V5_HIGH_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_CORE_1V5_HIGH_WARN;
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_CORE_1V5_LOW_WARN;
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_CORE_1V5_LOW_ERR;
+ }
+ pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+ pAC->I2c.SenTable[i].SenReg = LM80_VT4_IN;
+ break;
+ case 6:
+ if (pAC->GIni.GIGenesis) {
+ pAC->I2c.SenTable[i].SenDesc = "Voltage PHY B PLL";
+ }
+ else {
+ pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 3V3";
+ }
+ pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+ pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN;
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN;
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR;
+ pAC->I2c.SenTable[i].SenReg = LM80_VT5_IN;
+ break;
+ case 7:
+ if (pAC->GIni.GIGenesis) {
+ pAC->I2c.SenTable[i].SenDesc = "Speed Fan";
+ pAC->I2c.SenTable[i].SenType = SK_SEN_FAN;
+ pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_FAN_HIGH_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_FAN_HIGH_WARN;
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_FAN_LOW_WARN;
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_FAN_LOW_ERR;
+ pAC->I2c.SenTable[i].SenReg = LM80_FAN2_IN;
+ }
+ else {
+ pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 2V5";
+ pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+ pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PHY_2V5_HIGH_ERR;
+ pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PHY_2V5_HIGH_WARN;
+ pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PHY_2V5_LOW_WARN;
+ pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PHY_2V5_LOW_ERR;
+ pAC->I2c.SenTable[i].SenReg = LM80_VT6_IN;
+ }
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_INIT | SK_ERRCL_SW,
+ SKERR_I2C_E001, SKERR_I2C_E001MSG);
+ break;
+ }
+
+ pAC->I2c.SenTable[i].SenValue = 0;
+ pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_OK;
+ pAC->I2c.SenTable[i].SenErrCts = 0;
+ pAC->I2c.SenTable[i].SenBegErrTS = 0;
+ pAC->I2c.SenTable[i].SenState = SK_SEN_IDLE;
+ pAC->I2c.SenTable[i].SenRead = SkLm80ReadSensor;
+ pAC->I2c.SenTable[i].SenDev = LM80_ADDR;
+ }
+
+#ifndef SK_DIAG
+ pAC->I2c.DummyReads = pAC->I2c.MaxSens;
+#endif /* !SK_DIAG */
+
+ /* Clear I2C IRQ */
+ SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
+
+ /* Now we are I/O initialized */
+ pAC->I2c.InitLevel = SK_INIT_IO;
+ return(0);
+} /* SkI2cInit1 */
+
+
+/*
+ * Init level 2: Start first sensor read.
+ */
+static int SkI2cInit2(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC) /* I/O Context */
+{
+ int ReadComplete;
+ SK_SENSOR *pSen;
+
+ if (pAC->I2c.InitLevel != SK_INIT_IO) {
+ /* ReInit not needed in I2C module */
+ /* Init0 and Init2 not permitted */
+ return(0);
+ }
+
+ pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
+ ReadComplete = SkI2cReadSensor(pAC, IoC, pSen);
+
+ if (ReadComplete) {
+ SK_ERR_LOG(pAC, SK_ERRCL_INIT, SKERR_I2C_E008, SKERR_I2C_E008MSG);
+ }
+
+ /* Now we are correctly initialized */
+ pAC->I2c.InitLevel = SK_INIT_RUN;
+
+ return(0);
+} /* SkI2cInit2*/
+
+
+/*
+ * Initialize I2C devices
+ *
+ * Get the first voltage value and discard it.
+ * Go into temperature read mode. A default pointer is not set.
+ *
+ * The things to be done depend on the init level in the parameter list:
+ * Level 0:
+ * Initialize only the data structures. Do NOT access hardware.
+ * Level 1:
+ * Initialize hardware through SK_IN / SK_OUT commands. Do NOT use interrupts.
+ * Level 2:
+ * Everything is possible. Interrupts may be used from now on.
+ *
+ * return:
+ * 0 = success
+ * other = error.
+ */
+int SkI2cInit(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context needed in levels 1 and 2 */
+int Level) /* Init Level */
+{
+
+ switch (Level) {
+ case SK_INIT_DATA:
+ return(SkI2cInit0(pAC));
+ case SK_INIT_IO:
+ return(SkI2cInit1(pAC, IoC));
+ case SK_INIT_RUN:
+ return(SkI2cInit2(pAC, IoC));
+ default:
+ break;
+ }
+
+ return(0);
+} /* SkI2cInit */
+
+
+#ifndef SK_DIAG
+
+/*
+ * Interrupt service function for the I2C Interface
+ *
+ * Clears the Interrupt source
+ *
+ * Reads the register and check it for sending a trap.
+ *
+ * Starts the timer if necessary.
+ */
+void SkI2cIsr(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC) /* I/O Context */
+{
+ SK_EVPARA Para;
+
+ /* Clear I2C IRQ */
+ SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
+
+ Para.Para64 = 0;
+ SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_IRQ, Para);
+} /* SkI2cIsr */
+
+
+/*
+ * Check this sensors Value against the threshold and send events.
+ */
+static void SkI2cCheckSensor(
+SK_AC *pAC, /* Adapter Context */
+SK_SENSOR *pSen)
+{
+ SK_EVPARA ParaLocal;
+ SK_BOOL TooHigh; /* Is sensor too high? */
+ SK_BOOL TooLow; /* Is sensor too low? */
+ SK_U64 CurrTime; /* Current Time */
+ SK_BOOL DoTrapSend; /* We need to send a trap */
+ SK_BOOL DoErrLog; /* We need to log the error */
+ SK_BOOL IsError; /* We need to log the error */
+
+ /* Check Dummy Reads first */
+ if (pAC->I2c.DummyReads > 0) {
+ pAC->I2c.DummyReads--;
+ return;
+ }
+
+ /* Get the current time */
+ CurrTime = SkOsGetTime(pAC);
+
+ /* Set para to the most useful setting: The current sensor. */
+ ParaLocal.Para64 = (SK_U64)pAC->I2c.CurrSens;
+
+ /* Check the Value against the thresholds. First: Error Thresholds */
+ TooHigh = (pSen->SenValue > pSen->SenThreErrHigh);
+ TooLow = (pSen->SenValue < pSen->SenThreErrLow);
+
+ IsError = SK_FALSE;
+ if (TooHigh || TooLow) {
+ /* Error condition is satisfied */
+ DoTrapSend = SK_TRUE;
+ DoErrLog = SK_TRUE;
+
+ /* Now error condition is satisfied */
+ IsError = SK_TRUE;
+
+ if (pSen->SenErrFlag == SK_SEN_ERR_ERR) {
+ /* This state is the former one */
+
+ /* So check first whether we have to send a trap */
+ if (pSen->SenLastErrTrapTS + SK_SEN_ERR_TR_HOLD >
+ CurrTime) {
+ /*
+ * Do NOT send the Trap. The hold back time
+ * has to run out first.
+ */
+ DoTrapSend = SK_FALSE;
+ }
+
+ /* Check now whether we have to log an Error */
+ if (pSen->SenLastErrLogTS + SK_SEN_ERR_LOG_HOLD >
+ CurrTime) {
+ /*
+ * Do NOT log the error. The hold back time
+ * has to run out first.
+ */
+ DoErrLog = SK_FALSE;
+ }
+ }
+ else {
+ /* We came from a different state -> Set Begin Time Stamp */
+ pSen->SenBegErrTS = CurrTime;
+ pSen->SenErrFlag = SK_SEN_ERR_ERR;
+ }
+
+ if (DoTrapSend) {
+ /* Set current Time */
+ pSen->SenLastErrTrapTS = CurrTime;
+ pSen->SenErrCts++;
+
+ /* Queue PNMI Event */
+ SkEventQueue(pAC, SKGE_PNMI, (TooHigh ?
+ SK_PNMI_EVT_SEN_ERR_UPP :
+ SK_PNMI_EVT_SEN_ERR_LOW),
+ ParaLocal);
+ }
+
+ if (DoErrLog) {
+ /* Set current Time */
+ pSen->SenLastErrLogTS = CurrTime;
+
+ if (pSen->SenType == SK_SEN_TEMP) {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E011,
+ SKERR_I2C_E011MSG);
+ } else if (pSen->SenType == SK_SEN_VOLT) {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E012,
+ SKERR_I2C_E012MSG);
+ } else
+ {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E015,
+ SKERR_I2C_E015MSG);
+ }
+ }
+ }
+
+ /* Check the Value against the thresholds */
+ /* 2nd: Warning thresholds */
+ TooHigh = (pSen->SenValue > pSen->SenThreWarnHigh);
+ TooLow = (pSen->SenValue < pSen->SenThreWarnLow);
+
+ if (!IsError && (TooHigh || TooLow)) {
+ /* Error condition is satisfied */
+ DoTrapSend = SK_TRUE;
+ DoErrLog = SK_TRUE;
+
+ if (pSen->SenErrFlag == SK_SEN_ERR_WARN) {
+ /* This state is the former one */
+
+ /* So check first whether we have to send a trap */
+ if (pSen->SenLastWarnTrapTS + SK_SEN_WARN_TR_HOLD >
+ CurrTime) {
+ /*
+ * Do NOT send the Trap. The hold back time
+ * has to run out first.
+ */
+ DoTrapSend = SK_FALSE;
+ }
+
+ /* Check now whether we have to log an Error */
+ if (pSen->SenLastWarnLogTS + SK_SEN_WARN_LOG_HOLD >
+ CurrTime) {
+ /*
+ * Do NOT log the error. The hold back time
+ * has to run out first.
+ */
+ DoErrLog = SK_FALSE;
+ }
+ }
+ else {
+ /* We came from a different state -> Set Begin Time Stamp */
+ pSen->SenBegWarnTS = CurrTime;
+ pSen->SenErrFlag = SK_SEN_ERR_WARN;
+ }
+
+ if (DoTrapSend) {
+ /* Set current Time */
+ pSen->SenLastWarnTrapTS = CurrTime;
+ pSen->SenWarnCts++;
+
+ /* Queue PNMI Event */
+ SkEventQueue(pAC, SKGE_PNMI, (TooHigh ?
+ SK_PNMI_EVT_SEN_WAR_UPP :
+ SK_PNMI_EVT_SEN_WAR_LOW),
+ ParaLocal);
+ }
+
+ if (DoErrLog) {
+ /* Set current Time */
+ pSen->SenLastWarnLogTS = CurrTime;
+
+ if (pSen->SenType == SK_SEN_TEMP) {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E009,
+ SKERR_I2C_E009MSG);
+ } else if (pSen->SenType == SK_SEN_VOLT) {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E010,
+ SKERR_I2C_E010MSG);
+ } else
+ {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E014,
+ SKERR_I2C_E014MSG);
+ }
+ }
+ }
+
+ /* Check for NO error at all */
+ if (!IsError && !TooHigh && !TooLow) {
+ /* Set o.k. Status if no error and no warning condition */
+ pSen->SenErrFlag = SK_SEN_ERR_OK;
+ }
+
+ /* End of check against the thresholds */
+
+ /* Bug fix AF: 16.Aug.2001: Correct the init base
+ * of LM80 sensor.
+ */
+ if (pSen->SenInit == SK_SEN_DYN_INIT_PCI_IO) {
+
+ pSen->SenInit = SK_SEN_DYN_INIT_NONE;
+
+ if (pSen->SenValue > SK_SEN_PCI_IO_RANGE_LIMITER) {
+ /* 5V PCI-IO Voltage */
+ pSen->SenThreWarnLow = SK_SEN_PCI_IO_5V_LOW_WARN;
+ pSen->SenThreErrLow = SK_SEN_PCI_IO_5V_LOW_ERR;
+ }
+ else {
+ /* 3.3V PCI-IO Voltage */
+ pSen->SenThreWarnHigh = SK_SEN_PCI_IO_3V3_HIGH_WARN;
+ pSen->SenThreErrHigh = SK_SEN_PCI_IO_3V3_HIGH_ERR;
+ }
+ }
+
+#if 0
+ /* Dynamic thresholds also for VAUX of LM80 sensor */
+ if (pSen->SenInit == SK_SEN_DYN_INIT_VAUX) {
+
+ pSen->SenInit = SK_SEN_DYN_INIT_NONE;
+
+ /* 3.3V VAUX Voltage */
+ if (pSen->SenValue > SK_SEN_VAUX_RANGE_LIMITER) {
+ pSen->SenThreWarnLow = SK_SEN_VAUX_3V3_LOW_WARN;
+ pSen->SenThreErrLow = SK_SEN_VAUX_3V3_LOW_ERR;
+ }
+ /* 0V VAUX Voltage */
+ else {
+ pSen->SenThreWarnHigh = SK_SEN_VAUX_0V_WARN_ERR;
+ pSen->SenThreErrHigh = SK_SEN_VAUX_0V_WARN_ERR;
+ }
+ }
+
+ /*
+ * Check initialization state:
+ * The VIO Thresholds need adaption
+ */
+ if (!pSen->SenInit && pSen->SenReg == LM80_VT1_IN &&
+ pSen->SenValue > SK_SEN_WARNLOW2C &&
+ pSen->SenValue < SK_SEN_WARNHIGH2) {
+ pSen->SenThreErrLow = SK_SEN_ERRLOW2C;
+ pSen->SenThreWarnLow = SK_SEN_WARNLOW2C;
+ pSen->SenInit = SK_TRUE;
+ }
+
+ if (!pSen->SenInit && pSen->SenReg == LM80_VT1_IN &&
+ pSen->SenValue > SK_SEN_WARNLOW2 &&
+ pSen->SenValue < SK_SEN_WARNHIGH2C) {
+ pSen->SenThreErrHigh = SK_SEN_ERRHIGH2C;
+ pSen->SenThreWarnHigh = SK_SEN_WARNHIGH2C;
+ pSen->SenInit = SK_TRUE;
+ }
+#endif
+
+ if (pSen->SenInit != SK_SEN_DYN_INIT_NONE) {
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E013, SKERR_I2C_E013MSG);
+ }
+} /* SkI2cCheckSensor*/
+
+
+/*
+ * The only Event to be served is the timeout event
+ *
+ */
+int SkI2cEvent(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 Event, /* Module specific Event */
+SK_EVPARA Para) /* Event specific Parameter */
+{
+ int ReadComplete;
+ SK_SENSOR *pSen;
+ SK_U32 Time;
+ SK_EVPARA ParaLocal;
+ int i;
+
+ /* New case: no sensors */
+ if (pAC->I2c.MaxSens == 0) {
+ return(0);
+ }
+
+ switch (Event) {
+ case SK_I2CEV_IRQ:
+ pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
+ ReadComplete = SkI2cReadSensor(pAC, IoC, pSen);
+
+ if (ReadComplete) {
+ /* Check sensor against defined thresholds */
+ SkI2cCheckSensor (pAC, pSen);
+
+ /* Increment Current sensor and set appropriate Timeout */
+ pAC->I2c.CurrSens++;
+ if (pAC->I2c.CurrSens >= pAC->I2c.MaxSens) {
+ pAC->I2c.CurrSens = 0;
+ Time = SK_I2C_TIM_LONG;
+ }
+ else {
+ Time = SK_I2C_TIM_SHORT;
+ }
+
+ /* Start Timer */
+ ParaLocal.Para64 = (SK_U64)0;
+
+ pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING;
+
+ SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time,
+ SKGE_I2C, SK_I2CEV_TIM, ParaLocal);
+ }
+ else {
+ /* Start Timer */
+ ParaLocal.Para64 = (SK_U64)0;
+
+ pAC->I2c.TimerMode = SK_TIMER_WATCH_STATEMACHINE;
+
+ SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, SK_I2C_TIM_WATCH,
+ SKGE_I2C, SK_I2CEV_TIM, ParaLocal);
+ }
+ break;
+ case SK_I2CEV_TIM:
+ if (pAC->I2c.TimerMode == SK_TIMER_NEW_GAUGING) {
+
+ ParaLocal.Para64 = (SK_U64)0;
+ SkTimerStop(pAC, IoC, &pAC->I2c.SenTimer);
+
+ pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
+ ReadComplete = SkI2cReadSensor(pAC, IoC, pSen);
+
+ if (ReadComplete) {
+ /* Check sensor against defined thresholds */
+ SkI2cCheckSensor (pAC, pSen);
+
+ /* Increment Current sensor and set appropriate Timeout */
+ pAC->I2c.CurrSens++;
+ if (pAC->I2c.CurrSens == pAC->I2c.MaxSens) {
+ pAC->I2c.CurrSens = 0;
+ Time = SK_I2C_TIM_LONG;
+ }
+ else {
+ Time = SK_I2C_TIM_SHORT;
+ }
+
+ /* Start Timer */
+ ParaLocal.Para64 = (SK_U64)0;
+
+ pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING;
+
+ SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time,
+ SKGE_I2C, SK_I2CEV_TIM, ParaLocal);
+ }
+ }
+ else {
+ pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
+ pSen->SenErrFlag = SK_SEN_ERR_FAULTY;
+ SK_I2C_STOP(IoC);
+
+ /* Increment Current sensor and set appropriate Timeout */
+ pAC->I2c.CurrSens++;
+ if (pAC->I2c.CurrSens == pAC->I2c.MaxSens) {
+ pAC->I2c.CurrSens = 0;
+ Time = SK_I2C_TIM_LONG;
+ }
+ else {
+ Time = SK_I2C_TIM_SHORT;
+ }
+
+ /* Start Timer */
+ ParaLocal.Para64 = (SK_U64)0;
+
+ pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING;
+
+ SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time,
+ SKGE_I2C, SK_I2CEV_TIM, ParaLocal);
+ }
+ break;
+ case SK_I2CEV_CLEAR:
+ for (i = 0; i < SK_MAX_SENSORS; i++) {
+ pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_OK;
+ pAC->I2c.SenTable[i].SenErrCts = 0;
+ pAC->I2c.SenTable[i].SenWarnCts = 0;
+ pAC->I2c.SenTable[i].SenBegErrTS = 0;
+ pAC->I2c.SenTable[i].SenBegWarnTS = 0;
+ pAC->I2c.SenTable[i].SenLastErrTrapTS = (SK_U64)0;
+ pAC->I2c.SenTable[i].SenLastErrLogTS = (SK_U64)0;
+ pAC->I2c.SenTable[i].SenLastWarnTrapTS = (SK_U64)0;
+ pAC->I2c.SenTable[i].SenLastWarnLogTS = (SK_U64)0;
+ }
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E006, SKERR_I2C_E006MSG);
+ }
+
+ return(0);
+} /* SkI2cEvent*/
+
+#endif /* !SK_DIAG */
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/sk98lin/sklm80.c b/drivers/net/sk98lin/sklm80.c
new file mode 100644
index 0000000..687572b
--- /dev/null
+++ b/drivers/net/sk98lin/sklm80.c
@@ -0,0 +1,292 @@
+/******************************************************************************
+ *
+ * Name: sklm80.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.20 $
+ * Date: $Date: 2002/08/13 09:16:27 $
+ * Purpose: Funktions to access Voltage and Temperature Sensor (LM80)
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: sklm80.c,v $
+ * Revision 1.20 2002/08/13 09:16:27 rschmidt
+ * Changed return value for SkLm80ReadSensor() back to 'int'
+ * Editorial changes
+ *
+ * Revision 1.19 2002/08/06 09:43:31 jschmalz
+ * Extensions and changes for Yukon
+ *
+ * Revision 1.18 2002/08/02 12:26:57 rschmidt
+ * Editorial changes
+ *
+ * Revision 1.17 1999/11/22 13:35:51 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.16 1999/05/27 14:05:47 malthoff
+ * Fans: Set SenVal to 0 if the fan value is 0 or 0xff. Both values
+ * are outside the limits (0: div zero error, 0xff: value not in
+ * range, assume 0).
+ *
+ * Revision 1.15 1999/05/27 13:38:51 malthoff
+ * Pervent from Division by zero errors.
+ *
+ * Revision 1.14 1999/05/20 09:20:01 cgoos
+ * Changes for 1000Base-T (Fan sensors).
+ *
+ * Revision 1.13 1998/10/22 09:48:14 gklug
+ * fix: SysKonnectFileId typo
+ *
+ * Revision 1.12 1998/10/09 06:12:06 malthoff
+ * Remove ID_sccs by SysKonnectFileId.
+ *
+ * Revision 1.11 1998/09/04 08:33:48 malthoff
+ * bug fix: SenState = SK_SEN_IDLE when
+ * leaving SK_SEN_VALEXT state
+ *
+ * Revision 1.10 1998/08/20 12:02:10 gklug
+ * fix: compiler warnings type mismatch
+ *
+ * Revision 1.9 1998/08/20 11:37:38 gklug
+ * chg: change Ioc to IoC
+ *
+ * Revision 1.8 1998/08/19 12:20:58 gklug
+ * fix: remove struct from C files (see CCC)
+ *
+ * Revision 1.7 1998/08/17 07:04:57 malthoff
+ * Take SkLm80RcvReg() function from ski2c.c.
+ * Add IoC parameter to BREAK_OR_WAIT() macro.
+ *
+ * Revision 1.6 1998/08/14 07:11:28 malthoff
+ * remove pAc with pAC.
+ *
+ * Revision 1.5 1998/08/14 06:46:55 gklug
+ * fix: temperature can get negative
+ *
+ * Revision 1.4 1998/08/13 08:27:04 gklug
+ * add: temperature reading now o.k.
+ * fix: pSen declaration, SK_ERR_LOG call, ADDR macro
+ *
+ * Revision 1.3 1998/08/13 07:28:21 gklug
+ * fix: pSen was wrong initialized
+ * add: correct conversion for voltage readings
+ *
+ * Revision 1.2 1998/08/11 07:52:14 gklug
+ * add: Lm80 read sensor function
+ *
+ * Revision 1.1 1998/07/17 09:57:12 gklug
+ * initial version
+ *
+ *
+ *
+ ******************************************************************************/
+
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+/*
+ LM80 functions
+*/
+static const char SysKonnectFileId[] =
+ "$Id: sklm80.c,v 1.20 2002/08/13 09:16:27 rschmidt Exp $" ;
+
+#include "h/skdrv1st.h" /* Driver Specific Definitions */
+#include "h/lm80.h"
+#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */
+
+#ifdef SK_DIAG
+#define BREAK_OR_WAIT(pAC,IoC,Event) SkI2cWait(pAC,IoC,Event)
+#else /* nSK_DIAG */
+#define BREAK_OR_WAIT(pAC,IoC,Event) break
+#endif /* nSK_DIAG */
+
+#ifdef SK_DIAG
+/*
+ * read the register 'Reg' from the device 'Dev'
+ *
+ * return read error -1
+ * success the read value
+ */
+int SkLm80RcvReg(
+SK_IOC IoC, /* Adapter Context */
+int Dev, /* I2C device address */
+int Reg) /* register to read */
+{
+ int Val = 0;
+ int TempExt;
+
+ /* Signal device number */
+ if (SkI2cSndDev(IoC, Dev, I2C_WRITE)) {
+ return(-1);
+ }
+
+ if (SkI2cSndByte(IoC, Reg)) {
+ return(-1);
+ }
+
+ /* repeat start */
+ if (SkI2cSndDev(IoC, Dev, I2C_READ)) {
+ return(-1);
+ }
+
+ switch (Reg) {
+ case LM80_TEMP_IN:
+ Val = (int)SkI2cRcvByte(IoC, 1);
+
+ /* First: correct the value: it might be negative */
+ if ((Val & 0x80) != 0) {
+ /* Value is negative */
+ Val = Val - 256;
+ }
+ Val = Val * SK_LM80_TEMP_LSB;
+ SkI2cStop(IoC);
+
+ TempExt = (int)SkLm80RcvReg(IoC, LM80_ADDR, LM80_TEMP_CTRL);
+
+ if (Val > 0) {
+ Val += ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);
+ }
+ else {
+ Val -= ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);
+ }
+ return(Val);
+ break;
+ case LM80_VT0_IN:
+ case LM80_VT1_IN:
+ case LM80_VT2_IN:
+ case LM80_VT3_IN:
+ Val = (int)SkI2cRcvByte(IoC, 1) * SK_LM80_VT_LSB;
+ break;
+
+ default:
+ Val = (int)SkI2cRcvByte(IoC, 1);
+ break;
+ }
+
+ SkI2cStop(IoC);
+ return(Val);
+}
+#endif /* SK_DIAG */
+
+/*
+ * read a sensors value (LM80 specific)
+ *
+ * This function reads a sensors value from the I2C sensor chip LM80.
+ * The sensor is defined by its index into the sensors database in the struct
+ * pAC points to.
+ *
+ * Returns 1 if the read is completed
+ * 0 if the read must be continued (I2C Bus still allocated)
+ */
+int SkLm80ReadSensor(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context needed in level 1 and 2 */
+SK_SENSOR *pSen) /* Sensor to be read */
+{
+ SK_I32 Value;
+
+ switch (pSen->SenState) {
+ case SK_SEN_IDLE:
+ /* Send address to ADDR register */
+ SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, pSen->SenReg, 0);
+
+ pSen->SenState = SK_SEN_VALUE ;
+ BREAK_OR_WAIT(pAC, IoC, I2C_READ);
+
+ case SK_SEN_VALUE:
+ /* Read value from data register */
+ SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
+
+ Value &= 0xff; /* only least significant byte is valid */
+
+ /* Do NOT check the Value against the thresholds */
+ /* Checking is done in the calling instance */
+
+ if (pSen->SenType == SK_SEN_VOLT) {
+ /* Voltage sensor */
+ pSen->SenValue = Value * SK_LM80_VT_LSB;
+ pSen->SenState = SK_SEN_IDLE ;
+ return(1);
+ }
+
+ if (pSen->SenType == SK_SEN_FAN) {
+ if (Value != 0 && Value != 0xff) {
+ /* Fan speed counter */
+ pSen->SenValue = SK_LM80_FAN_FAKTOR/Value;
+ }
+ else {
+ /* Indicate Fan error */
+ pSen->SenValue = 0;
+ }
+ pSen->SenState = SK_SEN_IDLE ;
+ return(1);
+ }
+
+ /* First: correct the value: it might be negative */
+ if ((Value & 0x80) != 0) {
+ /* Value is negative */
+ Value = Value - 256;
+ }
+
+ /* We have a temperature sensor and need to get the signed extension.
+ * For now we get the extension from the last reading, so in the normal
+ * case we won't see flickering temperatures.
+ */
+ pSen->SenValue = (Value * SK_LM80_TEMP_LSB) +
+ (pSen->SenValue % SK_LM80_TEMP_LSB);
+
+ /* Send address to ADDR register */
+ SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, LM80_TEMP_CTRL, 0);
+
+ pSen->SenState = SK_SEN_VALEXT ;
+ BREAK_OR_WAIT(pAC, IoC, I2C_READ);
+
+ case SK_SEN_VALEXT:
+ /* Read value from data register */
+ SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
+ Value &= LM80_TEMP_LSB_9; /* only bit 7 is valid */
+
+ /* cut the LSB bit */
+ pSen->SenValue = ((pSen->SenValue / SK_LM80_TEMP_LSB) *
+ SK_LM80_TEMP_LSB);
+
+ if (pSen->SenValue < 0) {
+ /* Value negative: The bit value must be subtracted */
+ pSen->SenValue -= ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
+ }
+ else {
+ /* Value positive: The bit value must be added */
+ pSen->SenValue += ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
+ }
+
+ pSen->SenState = SK_SEN_IDLE ;
+ return(1);
+
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E007, SKERR_I2C_E007MSG);
+ return(1);
+ }
+
+ /* Not completed */
+ return(0);
+}
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/sk98lin/skproc.c b/drivers/net/sk98lin/skproc.c
new file mode 100644
index 0000000..4e34073
--- /dev/null
+++ b/drivers/net/sk98lin/skproc.c
@@ -0,0 +1,515 @@
+/******************************************************************************
+ *
+ * Name: skproc.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.4 $
+ * Date: $Date: 2003/02/25 14:16:37 $
+ * Purpose: Funktions to display statictic data
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Created 22-Nov-2000
+ * Author: Mirko Lindner (mlindner@syskonnect.de)
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skproc.c,v $
+ * Revision 1.4 2003/02/25 14:16:37 mlindner
+ * Fix: Copyright statement
+ *
+ * Revision 1.3 2002/10/02 12:59:51 mlindner
+ * Add: Support for Yukon
+ * Add: Speed check and setup
+ * Add: Merge source for kernel 2.2.x and 2.4.x
+ * Add: Read sensor names directly from VPD
+ * Fix: Volt values
+ *
+ * Revision 1.2.2.7 2002/01/14 12:45:15 mlindner
+ * Fix: Editorial changes
+ *
+ * Revision 1.2.2.6 2001/12/06 15:26:07 mlindner
+ * Fix: Return value of proc_read
+ *
+ * Revision 1.2.2.5 2001/12/06 09:57:39 mlindner
+ * New ProcFs entries
+ *
+ * Revision 1.2.2.4 2001/09/05 12:16:02 mlindner
+ * Add: New ProcFs entries
+ * Fix: Counter Errors (Jumbo == to long errors)
+ * Fix: Kernel error compilation
+ * Fix: too short counters
+ *
+ * Revision 1.2.2.3 2001/06/25 07:26:26 mlindner
+ * Add: More error messages
+ *
+ * Revision 1.2.2.2 2001/03/15 12:50:13 mlindner
+ * fix: ProcFS owner protection
+ *
+ * Revision 1.2.2.1 2001/03/12 16:43:48 mlindner
+ * chg: 2.4 requirements for procfs
+ *
+ * Revision 1.1 2001/01/22 14:15:31 mlindner
+ * added ProcFs functionality
+ * Dual Net functionality integrated
+ * Rlmt networks added
+ *
+ *
+ ******************************************************************************/
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+#include <linux/proc_fs.h>
+
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+#define ZEROPAD 1 /* pad with zero */
+#define SIGN 2 /* unsigned/signed long */
+#define PLUS 4 /* show plus */
+#define SPACE 8 /* space if plus */
+#define LEFT 16 /* left justified */
+#define SPECIALX 32 /* 0x */
+#define LARGE 64
+
+extern SK_AC *pACList;
+extern struct net_device *SkGeRootDev;
+
+extern char * SkNumber(
+ char * str,
+ long long num,
+ int base,
+ int size,
+ int precision,
+ int type);
+
+
+/*****************************************************************************
+ *
+ * proc_read - print "summaries" entry
+ *
+ * Description:
+ * This function fills the proc entry with statistic data about
+ * the ethernet device.
+ *
+ *
+ * Returns: buffer with statistic data
+ *
+ */
+int proc_read(char *buffer,
+char **buffer_location,
+off_t offset,
+int buffer_length,
+int *eof,
+void *data)
+{
+ int len = 0;
+ int t;
+ int i;
+ DEV_NET *pNet;
+ SK_AC *pAC;
+ char test_buf[100];
+ char sens_msg[50];
+ unsigned long Flags;
+ unsigned int Size;
+ struct SK_NET_DEVICE *next;
+ struct SK_NET_DEVICE *SkgeProcDev = SkGeRootDev;
+
+ SK_PNMI_STRUCT_DATA *pPnmiStruct;
+ SK_PNMI_STAT *pPnmiStat;
+ struct proc_dir_entry *file = (struct proc_dir_entry*) data;
+
+ while (SkgeProcDev) {
+ pNet = (DEV_NET*) SkgeProcDev->priv;
+ pAC = pNet->pAC;
+ next = pAC->Next;
+ pPnmiStruct = &pAC->PnmiStruct;
+ /* NetIndex in GetStruct is now required, zero is only dummy */
+
+ for (t=pAC->GIni.GIMacsFound; t > 0; t--) {
+ if ((pAC->GIni.GIMacsFound == 2) && pAC->RlmtNets == 1)
+ t--;
+
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+ Size = SK_PNMI_STRUCT_SIZE;
+ SkPnmiGetStruct(pAC, pAC->IoBase,
+ pPnmiStruct, &Size, t-1);
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+
+ if (strcmp(pAC->dev[t-1]->name, file->name) == 0) {
+ pPnmiStat = &pPnmiStruct->Stat[0];
+ len = sprintf(buffer,
+ "\nDetailed statistic for device %s\n",
+ pAC->dev[t-1]->name);
+ len += sprintf(buffer + len,
+ "=======================================\n");
+
+ /* Board statistics */
+ len += sprintf(buffer + len,
+ "\nBoard statistics\n\n");
+ len += sprintf(buffer + len,
+ "Active Port %c\n",
+ 'A' + pAC->Rlmt.Net[t-1].Port[pAC->Rlmt.
+ Net[t-1].PrefPort]->PortNumber);
+ len += sprintf(buffer + len,
+ "Preferred Port %c\n",
+ 'A' + pAC->Rlmt.Net[t-1].Port[pAC->Rlmt.
+ Net[t-1].PrefPort]->PortNumber);
+
+ len += sprintf(buffer + len,
+ "Bus speed (MHz) %d\n",
+ pPnmiStruct->BusSpeed);
+
+ len += sprintf(buffer + len,
+ "Bus width (Bit) %d\n",
+ pPnmiStruct->BusWidth);
+ len += sprintf(buffer + len,
+ "Hardware revision v%d.%d\n",
+ (pAC->GIni.GIPciHwRev >> 4) & 0x0F,
+ pAC->GIni.GIPciHwRev & 0x0F);
+
+ /* Print sensor informations */
+ for (i=0; i < pAC->I2c.MaxSens; i ++) {
+ /* Check type */
+ switch (pAC->I2c.SenTable[i].SenType) {
+ case 1:
+ strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
+ strcat(sens_msg, " (C)");
+ len += sprintf(buffer + len,
+ "%-25s %d.%02d\n",
+ sens_msg,
+ pAC->I2c.SenTable[i].SenValue / 10,
+ pAC->I2c.SenTable[i].SenValue % 10);
+
+ strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
+ strcat(sens_msg, " (F)");
+ len += sprintf(buffer + len,
+ "%-25s %d.%02d\n",
+ sens_msg,
+ ((((pAC->I2c.SenTable[i].SenValue)
+ *10)*9)/5 + 3200)/100,
+ ((((pAC->I2c.SenTable[i].SenValue)
+ *10)*9)/5 + 3200) % 10);
+ break;
+ case 2:
+ strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
+ strcat(sens_msg, " (V)");
+ len += sprintf(buffer + len,
+ "%-25s %d.%03d\n",
+ sens_msg,
+ pAC->I2c.SenTable[i].SenValue / 1000,
+ pAC->I2c.SenTable[i].SenValue % 1000);
+ break;
+ case 3:
+ strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
+ strcat(sens_msg, " (rpm)");
+ len += sprintf(buffer + len,
+ "%-25s %d\n",
+ sens_msg,
+ pAC->I2c.SenTable[i].SenValue);
+ break;
+ default:
+ break;
+ }
+ }
+
+ /*Receive statistics */
+ len += sprintf(buffer + len,
+ "\nReceive statistics\n\n");
+
+ len += sprintf(buffer + len,
+ "Received bytes %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxOctetsOkCts,
+ 10,0,-1,0));
+ len += sprintf(buffer + len,
+ "Received packets %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxOkCts,
+ 10,0,-1,0));
+#if 0
+ if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC &&
+ pAC->HWRevision < 12) {
+ pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts -
+ pPnmiStat->StatRxShortsCts;
+ pPnmiStat->StatRxShortsCts = 0;
+ }
+#endif
+ if (pNet->Mtu > 1500)
+ pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts -
+ pPnmiStat->StatRxTooLongCts;
+
+ len += sprintf(buffer + len,
+ "Receive errors %s\n",
+ SkNumber(test_buf, pPnmiStruct->InErrorsCts,
+ 10,0,-1,0));
+ len += sprintf(buffer + len,
+ "Receive drops %s\n",
+ SkNumber(test_buf, pPnmiStruct->RxNoBufCts,
+ 10,0,-1,0));
+ len += sprintf(buffer + len,
+ "Received multicast %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxMulticastOkCts,
+ 10,0,-1,0));
+ len += sprintf(buffer + len,
+ "Receive error types\n");
+ len += sprintf(buffer + len,
+ " length %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxRuntCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " buffer overflow %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxFifoOverflowCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " bad crc %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxFcsCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " framing %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxFramingCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " missed frames %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxMissedCts,
+ 10, 0, -1, 0));
+
+ if (pNet->Mtu > 1500)
+ pPnmiStat->StatRxTooLongCts = 0;
+
+ len += sprintf(buffer + len,
+ " too long %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxTooLongCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " carrier extension %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxCextCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " too short %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxShortsCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " symbol %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxSymbolCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " LLC MAC size %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxIRLengthCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " carrier event %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxCarrierCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " jabber %s\n",
+ SkNumber(test_buf, pPnmiStat->StatRxJabberCts,
+ 10, 0, -1, 0));
+
+
+ /*Transmit statistics */
+ len += sprintf(buffer + len,
+ "\nTransmit statistics\n\n");
+
+ len += sprintf(buffer + len,
+ "Transmited bytes %s\n",
+ SkNumber(test_buf, pPnmiStat->StatTxOctetsOkCts,
+ 10,0,-1,0));
+ len += sprintf(buffer + len,
+ "Transmited packets %s\n",
+ SkNumber(test_buf, pPnmiStat->StatTxOkCts,
+ 10,0,-1,0));
+ len += sprintf(buffer + len,
+ "Transmit errors %s\n",
+ SkNumber(test_buf, pPnmiStat->StatTxSingleCollisionCts,
+ 10,0,-1,0));
+ len += sprintf(buffer + len,
+ "Transmit dropped %s\n",
+ SkNumber(test_buf, pPnmiStruct->TxNoBufCts,
+ 10,0,-1,0));
+ len += sprintf(buffer + len,
+ "Transmit collisions %s\n",
+ SkNumber(test_buf, pPnmiStat->StatTxSingleCollisionCts,
+ 10,0,-1,0));
+ len += sprintf(buffer + len,
+ "Transmit errors types\n");
+ len += sprintf(buffer + len,
+ " excessive collision %ld\n",
+ pAC->stats.tx_aborted_errors);
+ len += sprintf(buffer + len,
+ " carrier %s\n",
+ SkNumber(test_buf, pPnmiStat->StatTxCarrierCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " fifo underrun %s\n",
+ SkNumber(test_buf, pPnmiStat->StatTxFifoUnderrunCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " heartbeat %s\n",
+ SkNumber(test_buf, pPnmiStat->StatTxCarrierCts,
+ 10, 0, -1, 0));
+ len += sprintf(buffer + len,
+ " window %ld\n",
+ pAC->stats.tx_window_errors);
+
+ }
+ }
+ SkgeProcDev = next;
+ }
+ if (offset >= len) {
+ *eof = 1;
+ return 0;
+ }
+
+ *buffer_location = buffer + offset;
+ if (buffer_length >= len - offset) {
+ *eof = 1;
+ }
+ return (min_t(int, buffer_length, len - offset));
+}
+
+
+/*****************************************************************************
+ *
+ * SkDoDiv - convert 64bit number
+ *
+ * Description:
+ * This function "converts" a long long number.
+ *
+ * Returns:
+ * remainder of division
+ */
+static long SkDoDiv (long long Dividend, int Divisor, long long *pErg)
+{
+ long Rest;
+ long long Ergebnis;
+ long Akku;
+
+
+ Akku = Dividend >> 32;
+
+ Ergebnis = ((long long) (Akku / Divisor)) << 32;
+ Rest = Akku % Divisor ;
+
+ Akku = Rest << 16;
+ Akku |= ((Dividend & 0xFFFF0000) >> 16);
+
+
+ Ergebnis += ((long long) (Akku / Divisor)) << 16;
+ Rest = Akku % Divisor ;
+
+ Akku = Rest << 16;
+ Akku |= (Dividend & 0xFFFF);
+
+ Ergebnis += (Akku / Divisor);
+ Rest = Akku % Divisor ;
+
+ *pErg = Ergebnis;
+ return (Rest);
+}
+
+
+#if 0
+#define do_div(n,base) ({ \
+long long __res; \
+__res = ((unsigned long long) n) % (unsigned) base; \
+n = ((unsigned long long) n) / (unsigned) base; \
+__res; })
+
+#endif
+
+
+/*****************************************************************************
+ *
+ * SkNumber - Print results
+ *
+ * Description:
+ * This function converts a long long number into a string.
+ *
+ * Returns:
+ * number as string
+ */
+char * SkNumber(char * str, long long num, int base, int size, int precision
+ ,int type)
+{
+ char c,sign,tmp[66], *strorg = str;
+ const char *digits="0123456789abcdefghijklmnopqrstuvwxyz";
+ int i;
+
+ if (type & LARGE)
+ digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ";
+ if (type & LEFT)
+ type &= ~ZEROPAD;
+ if (base < 2 || base > 36)
+ return 0;
+ c = (type & ZEROPAD) ? '0' : ' ';
+ sign = 0;
+ if (type & SIGN) {
+ if (num < 0) {
+ sign = '-';
+ num = -num;
+ size--;
+ } else if (type & PLUS) {
+ sign = '+';
+ size--;
+ } else if (type & SPACE) {
+ sign = ' ';
+ size--;
+ }
+ }
+ if (type & SPECIALX) {
+ if (base == 16)
+ size -= 2;
+ else if (base == 8)
+ size--;
+ }
+ i = 0;
+ if (num == 0)
+ tmp[i++]='0';
+ else while (num != 0)
+ tmp[i++] = digits[SkDoDiv(num,base, &num)];
+
+ if (i > precision)
+ precision = i;
+ size -= precision;
+ if (!(type&(ZEROPAD+LEFT)))
+ while(size-->0)
+ *str++ = ' ';
+ if (sign)
+ *str++ = sign;
+ if (type & SPECIALX) {
+ if (base==8)
+ *str++ = '0';
+ else if (base==16) {
+ *str++ = '0';
+ *str++ = digits[33];
+ }
+ }
+ if (!(type & LEFT))
+ while (size-- > 0)
+ *str++ = c;
+ while (i < precision--)
+ *str++ = '0';
+ while (i-- > 0)
+ *str++ = tmp[i];
+ while (size-- > 0)
+ *str++ = ' ';
+
+ str[0] = '\0';
+
+ return strorg;
+}
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/sk98lin/skqueue.c b/drivers/net/sk98lin/skqueue.c
new file mode 100644
index 0000000..c49baed
--- /dev/null
+++ b/drivers/net/sk98lin/skqueue.c
@@ -0,0 +1,242 @@
+/******************************************************************************
+ *
+ * Name: skqueue.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.18 $
+ * Date: $Date: 2002/05/07 14:11:11 $
+ * Purpose: Management of an event queue.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skqueue.c,v $
+ * Revision 1.18 2002/05/07 14:11:11 rwahl
+ * Fixed Watcom Precompiler error.
+ *
+ * Revision 1.17 2002/03/25 10:06:41 mkunz
+ * SkIgnoreEvent deleted
+ *
+ * Revision 1.16 2002/03/15 10:51:59 mkunz
+ * Added event classes for link aggregation
+ *
+ * Revision 1.15 1999/11/22 13:36:29 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.14 1998/10/15 15:11:35 gklug
+ * fix: ID_sccs to SysKonnectFileId
+ *
+ * Revision 1.13 1998/09/08 08:47:52 gklug
+ * add: init level handling
+ *
+ * Revision 1.12 1998/09/08 07:43:20 gklug
+ * fix: Sirq Event function name
+ *
+ * Revision 1.11 1998/09/08 05:54:34 gklug
+ * chg: define SK_CSUM is replaced by SK_USE_CSUM
+ *
+ * Revision 1.10 1998/09/03 14:14:49 gklug
+ * add: CSUM and HWAC Eventclass and function.
+ *
+ * Revision 1.9 1998/08/19 09:50:50 gklug
+ * fix: remove struct keyword from c-code (see CCC) add typedefs
+ *
+ * Revision 1.8 1998/08/17 13:43:11 gklug
+ * chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR
+ *
+ * Revision 1.7 1998/08/14 07:09:11 gklug
+ * fix: chg pAc -> pAC
+ *
+ * Revision 1.6 1998/08/11 12:13:14 gklug
+ * add: return code feature of Event service routines
+ * add: correct Error log calls
+ *
+ * Revision 1.5 1998/08/07 12:53:45 gklug
+ * fix: first compiled version
+ *
+ * Revision 1.4 1998/08/07 09:20:48 gklug
+ * adapt functions to C coding conventions.
+ *
+ * Revision 1.3 1998/08/05 11:29:32 gklug
+ * rmv: Timer event entry. Timer will queue event directly
+ *
+ * Revision 1.2 1998/07/31 11:22:40 gklug
+ * Initial version
+ *
+ * Revision 1.1 1998/07/30 15:14:01 gklug
+ * Initial version. Adapted from SMT
+ *
+ *
+ *
+ ******************************************************************************/
+
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+/*
+ Event queue and dispatcher
+*/
+static const char SysKonnectFileId[] =
+ "$Header: /usr56/projects/ge/schedule/skqueue.c,v 1.18 2002/05/07 14:11:11 rwahl Exp $" ;
+
+#include "h/skdrv1st.h" /* Driver Specific Definitions */
+#include "h/skqueue.h" /* Queue Definitions */
+#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */
+
+#ifdef __C2MAN__
+/*
+ Event queue management.
+
+ General Description:
+
+ */
+intro()
+{}
+#endif
+
+#define PRINTF(a,b,c)
+
+/*
+ * init event queue management
+ *
+ * Must be called during init level 0.
+ */
+void SkEventInit(
+SK_AC *pAC, /* Adapter context */
+SK_IOC Ioc, /* IO context */
+int Level) /* Init level */
+{
+ switch (Level) {
+ case SK_INIT_DATA:
+ pAC->Event.EvPut = pAC->Event.EvGet = pAC->Event.EvQueue ;
+ break;
+ default:
+ break;
+ }
+}
+
+/*
+ * add event to queue
+ */
+void SkEventQueue(
+SK_AC *pAC, /* Adapters context */
+SK_U32 Class, /* Event Class */
+SK_U32 Event, /* Event to be queued */
+SK_EVPARA Para) /* Event parameter */
+{
+ pAC->Event.EvPut->Class = Class ;
+ pAC->Event.EvPut->Event = Event ;
+ pAC->Event.EvPut->Para = Para ;
+ if (++pAC->Event.EvPut == &pAC->Event.EvQueue[SK_MAX_EVENT])
+ pAC->Event.EvPut = pAC->Event.EvQueue ;
+
+ if (pAC->Event.EvPut == pAC->Event.EvGet) {
+ SK_ERR_LOG(pAC, SK_ERRCL_NORES, SKERR_Q_E001, SKERR_Q_E001MSG) ;
+ }
+}
+
+/*
+ * event dispatcher
+ * while event queue is not empty
+ * get event from queue
+ * send command to state machine
+ * end
+ * return error reported by individual Event function
+ * 0 if no error occured.
+ */
+int SkEventDispatcher(
+SK_AC *pAC, /* Adapters Context */
+SK_IOC Ioc) /* Io context */
+{
+ SK_EVENTELEM *pEv ; /* pointer into queue */
+ SK_U32 Class ;
+ int Rtv ;
+
+ pEv = pAC->Event.EvGet ;
+ PRINTF("dispatch get %x put %x\n",pEv,pAC->Event.ev_put) ;
+ while (pEv != pAC->Event.EvPut) {
+ PRINTF("dispatch Class %d Event %d\n",pEv->Class,pEv->Event) ;
+ switch(Class = pEv->Class) {
+#ifndef SK_USE_LAC_EV
+ case SKGE_RLMT : /* RLMT Event */
+ Rtv = SkRlmtEvent(pAC,Ioc,pEv->Event,pEv->Para);
+ break ;
+ case SKGE_I2C : /* I2C Event */
+ Rtv = SkI2cEvent(pAC,Ioc,pEv->Event,pEv->Para);
+ break ;
+ case SKGE_PNMI :
+ Rtv = SkPnmiEvent(pAC,Ioc,pEv->Event,pEv->Para);
+ break ;
+#endif /* SK_USE_LAC_EV */
+ case SKGE_DRV : /* Driver Event */
+ Rtv = SkDrvEvent(pAC,Ioc,pEv->Event,pEv->Para);
+ break ;
+#ifndef SK_USE_SW_TIMER
+ case SKGE_HWAC :
+ Rtv = SkGeSirqEvent(pAC,Ioc,pEv->Event,pEv->Para);
+ break ;
+#else /* !SK_USE_SW_TIMER */
+ case SKGE_SWT :
+ Rtv = SkSwtEvent(pAC,Ioc,pEv->Event,pEv->Para);
+ break ;
+#endif /* !SK_USE_SW_TIMER */
+#ifdef SK_USE_LAC_EV
+ case SKGE_LACP :
+ Rtv = SkLacpEvent(pAC,Ioc,pEv->Event,pEv->Para);
+ break ;
+ case SKGE_RSF :
+ Rtv = SkRsfEvent(pAC,Ioc,pEv->Event,pEv->Para);
+ break ;
+ case SKGE_MARKER :
+ Rtv = SkMarkerEvent(pAC,Ioc,pEv->Event,pEv->Para);
+ break ;
+ case SKGE_FD :
+ Rtv = SkFdEvent(pAC,Ioc,pEv->Event,pEv->Para);
+ break ;
+#endif /* SK_USE_LAC_EV */
+#ifdef SK_USE_CSUM
+ case SKGE_CSUM :
+ Rtv = SkCsEvent(pAC,Ioc,pEv->Event,pEv->Para);
+ break ;
+#endif /* SK_USE_CSUM */
+ default :
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_Q_E002,
+ SKERR_Q_E002MSG) ;
+ Rtv = 0;
+ }
+
+ if (Rtv != 0) {
+ return(Rtv) ;
+ }
+
+ if (++pEv == &pAC->Event.EvQueue[SK_MAX_EVENT])
+ pEv = pAC->Event.EvQueue ;
+
+ /* Renew get: it is used in queue_events to detect overruns */
+ pAC->Event.EvGet = pEv;
+ }
+
+ return(0) ;
+}
+
+#endif /* CONFIG_SK98 */
+
+/* End of file */
diff --git a/drivers/net/sk98lin/skrlmt.c b/drivers/net/sk98lin/skrlmt.c
new file mode 100644
index 0000000..f8a3b41
--- /dev/null
+++ b/drivers/net/sk98lin/skrlmt.c
@@ -0,0 +1,3508 @@
+/******************************************************************************
+ *
+ * Name: skrlmt.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.68 $
+ * Date: $Date: 2003/01/31 15:26:56 $
+ * Purpose: Manage links on SK-NET Adapters, esp. redundant ones.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skrlmt.c,v $
+ * Revision 1.68 2003/01/31 15:26:56 rschmidt
+ * Added init for local variables in RlmtInit().
+ *
+ * Revision 1.67 2003/01/31 14:12:41 mkunz
+ * single port adapter runs now with two identical MAC addresses
+ *
+ * Revision 1.66 2002/09/23 15:14:19 rwahl
+ * - Reset broadcast timestamp on link down.
+ * - Editorial corrections.
+ *
+ * Revision 1.65 2002/07/22 14:29:48 rwahl
+ * - Removed BRK statement from debug check.
+ *
+ * Revision 1.64 2001/11/28 19:36:14 rwahl
+ * - RLMT Packets sent to an invalid MAC address in CLP/CLPSS mode
+ * (#10650).
+ * - Reworked fix for port switching in CLS mode (#10639)
+ * (no dependency to RLMT module).
+ * - Enabled dbg output for entry/exit of event functions.
+ * - Editorial changes.
+ *
+ * Revision 1.63 2001/10/26 07:53:18 afischer
+ * Port switching bug in `check local link` mode
+ *
+ * Revision 1.62 2001/07/03 12:16:30 mkunz
+ * New Flag ChgBcPrio (Change priority of last broadcast received)
+ *
+ * Revision 1.61 2001/03/14 12:52:08 rassmann
+ * Fixed reporting of active port up/down to PNMI.
+ *
+ * Revision 1.60 2001/02/21 16:02:25 gklug
+ * fix: when RLMT starts set Active Port for PNMI
+ *
+ * Revision 1.59 2001/02/16 14:38:19 rassmann
+ * Initializing some pointers earlier in the init phase.
+ * Rx Mbufs are freed if the net which they belong to is stopped.
+ *
+ * Revision 1.58 2001/02/14 14:06:31 rassmann
+ * Editorial changes.
+ *
+ * Revision 1.57 2001/02/05 14:25:26 rassmann
+ * Prepared RLMT for transparent operation.
+ *
+ * Revision 1.56 2001/01/30 10:29:09 rassmann
+ * Not checking switching befor RlmtStart.
+ * Editorial changes.
+ *
+ * Revision 1.55 2001/01/22 13:41:38 rassmann
+ * Supporting two nets on dual-port adapters.
+ *
+ * Revision 1.54 2000/11/30 13:25:07 rassmann
+ * Setting SK_TICK_INCR to 1 by default.
+ *
+ * Revision 1.53 2000/11/30 10:48:07 cgoos
+ * Changed definition of SK_RLMT_BC_DELTA.
+ *
+ * Revision 1.52 2000/11/27 12:50:03 rassmann
+ * Checking ports after receiving broadcasts.
+ *
+ * Revision 1.51 2000/11/17 08:58:00 rassmann
+ * Moved CheckSwitch from SK_RLMT_PACKET_RECEIVED to SK_RLMT_TIM event.
+ *
+ * Revision 1.50 2000/11/09 12:24:34 rassmann
+ * Indicating that segmentation check is not running anymore after
+ * SkRlmtCheckSeg().
+ * Restarting segmentation timer after segmentation log.
+ * Editorial changes.
+ *
+ * Revision 1.49 1999/11/22 13:38:02 cgoos
+ * Changed license header to GPL.
+ * Added initialization to some variables to avoid compiler warnings.
+ *
+ * Revision 1.48 1999/10/04 14:01:17 rassmann
+ * Corrected reaction to reception of BPDU frames (#10441).
+ *
+ * Revision 1.47 1999/07/20 12:53:36 rassmann
+ * Fixed documentation errors for lookahead macros.
+ *
+ * Revision 1.46 1999/05/28 13:29:16 rassmann
+ * Replaced C++-style comment.
+ *
+ * Revision 1.45 1999/05/28 13:28:08 rassmann
+ * Corrected syntax error (xxx).
+ *
+ * Revision 1.44 1999/05/28 11:15:54 rassmann
+ * Changed behaviour to reflect Design Spec v1.2.
+ * Controlling Link LED(s).
+ * Introduced RLMT Packet Version field in RLMT Packet.
+ * Newstyle lookahead macros (checking meta-information before looking at
+ * the packet).
+ *
+ * Revision 1.43 1999/01/28 13:12:43 rassmann
+ * Corrected Lookahead (bug introduced in previous Rev.).
+ *
+ * Revision 1.42 1999/01/28 12:50:41 rassmann
+ * Not using broadcast time stamps in CheckLinkState mode.
+ *
+ * Revision 1.41 1999/01/27 14:13:02 rassmann
+ * Monitoring broadcast traffic.
+ * Switching more reliably and not too early if switch is
+ * configured for spanning tree.
+ *
+ * Revision 1.40 1999/01/22 13:17:30 rassmann
+ * Informing PNMI of NET_UP.
+ * Clearing RLMT multicast addresses before setting them for the first time.
+ * Reporting segmentation earlier, setting a "quiet time"
+ * after a report.
+ *
+ * Revision 1.39 1998/12/10 15:29:53 rassmann
+ * Corrected SuspectStatus in SkRlmtBuildCheckChain().
+ * Corrected CHECK_SEG mode.
+ *
+ * Revision 1.38 1998/12/08 13:11:23 rassmann
+ * Stopping SegTimer at RlmtStop.
+ *
+ * Revision 1.37 1998/12/07 16:51:42 rassmann
+ * Corrected comments.
+ *
+ * Revision 1.36 1998/12/04 10:58:56 rassmann
+ * Setting next pointer to NULL when receiving.
+ *
+ * Revision 1.35 1998/12/03 16:12:42 rassmann
+ * Ignoring/correcting illegal PrefPort values.
+ *
+ * Revision 1.34 1998/12/01 11:45:35 rassmann
+ * Code cleanup.
+ *
+ * Revision 1.33 1998/12/01 10:29:32 rassmann
+ * Starting standby ports before getting the net up.
+ * Checking if a port is started when the link comes up.
+ *
+ * Revision 1.32 1998/11/30 16:19:50 rassmann
+ * New default for PortNoRx.
+ *
+ * Revision 1.31 1998/11/27 19:17:13 rassmann
+ * Corrected handling of LINK_DOWN coming shortly after LINK_UP.
+ *
+ * Revision 1.30 1998/11/24 12:37:31 rassmann
+ * Implemented segmentation check.
+ *
+ * Revision 1.29 1998/11/18 13:04:32 rassmann
+ * Secured PortUpTimer event.
+ * Waiting longer before starting standby port(s).
+ *
+ * Revision 1.28 1998/11/17 13:43:04 rassmann
+ * Handling (logical) tx failure.
+ * Sending packet on logical address after PORT_SWITCH.
+ *
+ * Revision 1.27 1998/11/13 17:09:50 rassmann
+ * Secured some events against being called in wrong state.
+ *
+ * Revision 1.26 1998/11/13 16:56:54 rassmann
+ * Added macro version of SkRlmtLookaheadPacket.
+ *
+ * Revision 1.25 1998/11/06 18:06:04 rassmann
+ * Corrected timing when RLMT checks fail.
+ * Clearing tx counter earlier in periodical checks.
+ *
+ * Revision 1.24 1998/11/05 10:37:27 rassmann
+ * Checking destination address in Lookahead.
+ *
+ * Revision 1.23 1998/11/03 13:53:49 rassmann
+ * RLMT should switch now (at least in mode 3).
+ *
+ * Revision 1.22 1998/10/29 14:34:49 rassmann
+ * Clearing SK_RLMT struct at startup.
+ * Initializing PortsUp during SK_RLMT_START.
+ *
+ * Revision 1.21 1998/10/28 11:30:17 rassmann
+ * Default mode is now SK_RLMT_CHECK_LOC_LINK.
+ *
+ * Revision 1.20 1998/10/26 16:02:03 rassmann
+ * Ignoring LINK_DOWN for links that are down.
+ *
+ * Revision 1.19 1998/10/22 15:54:01 rassmann
+ * Corrected EtherLen.
+ * Starting Link Check when second port comes up.
+ *
+ * Revision 1.18 1998/10/22 11:39:50 rassmann
+ * Corrected signed/unsigned mismatches.
+ * Corrected receive list handling and address recognition.
+ *
+ * Revision 1.17 1998/10/19 17:01:20 rassmann
+ * More detailed checking of received packets.
+ *
+ * Revision 1.16 1998/10/15 15:16:34 rassmann
+ * Finished Spanning Tree checking.
+ * Checked with lint.
+ *
+ * Revision 1.15 1998/09/24 19:16:07 rassmann
+ * Code cleanup.
+ * Introduced Timer for PORT_DOWN due to no RX.
+ *
+ * Revision 1.14 1998/09/18 20:27:14 rassmann
+ * Added address override.
+ *
+ * Revision 1.13 1998/09/16 11:31:48 rassmann
+ * Including skdrv1st.h again. :(
+ *
+ * Revision 1.12 1998/09/16 11:09:50 rassmann
+ * Syntax corrections.
+ *
+ * Revision 1.11 1998/09/15 12:32:03 rassmann
+ * Syntax correction.
+ *
+ * Revision 1.10 1998/09/15 11:28:49 rassmann
+ * Syntax corrections.
+ *
+ * Revision 1.9 1998/09/14 17:07:37 rassmann
+ * Added code for port checking via LAN.
+ * Changed Mbuf definition.
+ *
+ * Revision 1.8 1998/09/07 11:14:14 rassmann
+ * Syntax corrections.
+ *
+ * Revision 1.7 1998/09/07 09:06:07 rassmann
+ * Syntax corrections.
+ *
+ * Revision 1.6 1998/09/04 19:41:33 rassmann
+ * Syntax corrections.
+ * Started entering code for checking local links.
+ *
+ * Revision 1.5 1998/09/04 12:14:27 rassmann
+ * Interface cleanup.
+ *
+ * Revision 1.4 1998/09/02 16:55:28 rassmann
+ * Updated to reflect new DRV/HWAC/RLMT interface.
+ *
+ * Revision 1.3 1998/08/27 14:29:03 rassmann
+ * Code cleanup.
+ *
+ * Revision 1.2 1998/08/27 14:26:24 rassmann
+ * Updated interface.
+ *
+ * Revision 1.1 1998/08/21 08:26:49 rassmann
+ * First public version.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This module contains code for Link ManagemenT (LMT) of SK-NET Adapters.
+ * It is mainly intended for adapters with more than one link.
+ * For such adapters, this module realizes Redundant Link ManagemenT (RLMT).
+ *
+ * Include File Hierarchy:
+ *
+ * "skdrv1st.h"
+ * "skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+#ifndef lint
+static const char SysKonnectFileId[] =
+ "@(#) $Id: skrlmt.c,v 1.68 2003/01/31 15:26:56 rschmidt Exp $ (C) SysKonnect.";
+#endif /* !defined(lint) */
+
+#define __SKRLMT_C
+
+#ifdef __cplusplus
+#error C++ is not yet supported.
+extern "C" {
+#endif /* cplusplus */
+
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+
+/* defines ********************************************************************/
+
+#ifndef SK_HWAC_LINK_LED
+#define SK_HWAC_LINK_LED(a,b,c,d)
+#endif /* !defined(SK_HWAC_LINK_LED) */
+
+#ifndef DEBUG
+#define RLMT_STATIC static
+#else /* DEBUG */
+#define RLMT_STATIC
+
+#ifndef SK_LITTLE_ENDIAN
+/* First 32 bits */
+#define OFFS_LO32 1
+
+/* Second 32 bits */
+#define OFFS_HI32 0
+#else /* SK_LITTLE_ENDIAN */
+/* First 32 bits */
+#define OFFS_LO32 0
+
+/* Second 32 bits */
+#define OFFS_HI32 1
+#endif /* SK_LITTLE_ENDIAN */
+
+#endif /* DEBUG */
+
+/* ----- Private timeout values ----- */
+
+#define SK_RLMT_MIN_TO_VAL 125000 /* 1/8 sec. */
+#define SK_RLMT_DEF_TO_VAL 1000000 /* 1 sec. */
+#define SK_RLMT_PORTDOWN_TIM_VAL 900000 /* another 0.9 sec. */
+#define SK_RLMT_PORTSTART_TIM_VAL 100000 /* 0.1 sec. */
+#define SK_RLMT_PORTUP_TIM_VAL 2500000 /* 2.5 sec. */
+#define SK_RLMT_SEG_TO_VAL 900000000 /* 15 min. */
+
+/* Assume tick counter increment is 1 - may be set OS-dependent. */
+#ifndef SK_TICK_INCR
+#define SK_TICK_INCR SK_CONSTU64(1)
+#endif /* !defined(SK_TICK_INCR) */
+
+/*
+ * Amount that a time stamp must be later to be recognized as "substantially
+ * later". This is about 1/128 sec, but above 1 tick counter increment.
+ */
+#define SK_RLMT_BC_DELTA (1 + ((SK_TICKS_PER_SEC >> 7) > SK_TICK_INCR ? \
+ (SK_TICKS_PER_SEC >> 7) : SK_TICK_INCR))
+
+/* ----- Private RLMT defaults ----- */
+
+#define SK_RLMT_DEF_PREF_PORT 0 /* "Lower" port. */
+#define SK_RLMT_DEF_MODE SK_RLMT_CHECK_LINK /* Default RLMT Mode. */
+
+/* ----- Private RLMT checking states ----- */
+
+#define SK_RLMT_RCS_SEG 1 /* RLMT Check State: check seg. */
+#define SK_RLMT_RCS_START_SEG 2 /* RLMT Check State: start check seg. */
+#define SK_RLMT_RCS_SEND_SEG 4 /* RLMT Check State: send BPDU packet */
+#define SK_RLMT_RCS_REPORT_SEG 8 /* RLMT Check State: report seg. */
+
+/* ----- Private PORT checking states ----- */
+
+#define SK_RLMT_PCS_TX 1 /* Port Check State: check tx. */
+#define SK_RLMT_PCS_RX 2 /* Port Check State: check rx. */
+
+/* ----- Private PORT events ----- */
+
+/* Note: Update simulation when changing these. */
+#define SK_RLMT_PORTSTART_TIM 1100 /* Port start timeout. */
+#define SK_RLMT_PORTUP_TIM 1101 /* Port can now go up. */
+#define SK_RLMT_PORTDOWN_RX_TIM 1102 /* Port did not receive once ... */
+#define SK_RLMT_PORTDOWN 1103 /* Port went down. */
+#define SK_RLMT_PORTDOWN_TX_TIM 1104 /* Partner did not receive ... */
+
+/* ----- Private RLMT events ----- */
+
+/* Note: Update simulation when changing these. */
+#define SK_RLMT_TIM 2100 /* RLMT timeout. */
+#define SK_RLMT_SEG_TIM 2101 /* RLMT segmentation check timeout. */
+
+#define TO_SHORTEN(tim) ((tim) / 2)
+
+/* Error numbers and messages. */
+#define SKERR_RLMT_E001 (SK_ERRBASE_RLMT + 0)
+#define SKERR_RLMT_E001_MSG "No Packet."
+#define SKERR_RLMT_E002 (SKERR_RLMT_E001 + 1)
+#define SKERR_RLMT_E002_MSG "Short Packet."
+#define SKERR_RLMT_E003 (SKERR_RLMT_E002 + 1)
+#define SKERR_RLMT_E003_MSG "Unknown RLMT event."
+#define SKERR_RLMT_E004 (SKERR_RLMT_E003 + 1)
+#define SKERR_RLMT_E004_MSG "PortsUp incorrect."
+#define SKERR_RLMT_E005 (SKERR_RLMT_E004 + 1)
+#define SKERR_RLMT_E005_MSG \
+ "Net seems to be segmented (different root bridges are reported on the ports)."
+#define SKERR_RLMT_E006 (SKERR_RLMT_E005 + 1)
+#define SKERR_RLMT_E006_MSG "Duplicate MAC Address detected."
+#define SKERR_RLMT_E007 (SKERR_RLMT_E006 + 1)
+#define SKERR_RLMT_E007_MSG "LinksUp incorrect."
+#define SKERR_RLMT_E008 (SKERR_RLMT_E007 + 1)
+#define SKERR_RLMT_E008_MSG "Port not started but link came up."
+#define SKERR_RLMT_E009 (SKERR_RLMT_E008 + 1)
+#define SKERR_RLMT_E009_MSG "Corrected illegal setting of Preferred Port."
+#define SKERR_RLMT_E010 (SKERR_RLMT_E009 + 1)
+#define SKERR_RLMT_E010_MSG "Ignored illegal Preferred Port."
+
+/* LLC field values. */
+#define LLC_COMMAND_RESPONSE_BIT 1
+#define LLC_TEST_COMMAND 0xE3
+#define LLC_UI 0x03
+
+/* RLMT Packet fields. */
+#define SK_RLMT_DSAP 0
+#define SK_RLMT_SSAP 0
+#define SK_RLMT_CTRL (LLC_TEST_COMMAND)
+#define SK_RLMT_INDICATOR0 0x53 /* S */
+#define SK_RLMT_INDICATOR1 0x4B /* K */
+#define SK_RLMT_INDICATOR2 0x2D /* - */
+#define SK_RLMT_INDICATOR3 0x52 /* R */
+#define SK_RLMT_INDICATOR4 0x4C /* L */
+#define SK_RLMT_INDICATOR5 0x4D /* M */
+#define SK_RLMT_INDICATOR6 0x54 /* T */
+#define SK_RLMT_PACKET_VERSION 0
+
+/* RLMT SPT Flag values. */
+#define SK_RLMT_SPT_FLAG_CHANGE 0x01
+#define SK_RLMT_SPT_FLAG_CHANGE_ACK 0x80
+
+/* RLMT SPT Packet fields. */
+#define SK_RLMT_SPT_DSAP 0x42
+#define SK_RLMT_SPT_SSAP 0x42
+#define SK_RLMT_SPT_CTRL (LLC_UI)
+#define SK_RLMT_SPT_PROTOCOL_ID0 0x00
+#define SK_RLMT_SPT_PROTOCOL_ID1 0x00
+#define SK_RLMT_SPT_PROTOCOL_VERSION_ID 0x00
+#define SK_RLMT_SPT_BPDU_TYPE 0x00
+#define SK_RLMT_SPT_FLAGS 0x00 /* ?? */
+#define SK_RLMT_SPT_ROOT_ID0 0xFF /* Lowest possible priority. */
+#define SK_RLMT_SPT_ROOT_ID1 0xFF /* Lowest possible priority. */
+
+/* Remaining 6 bytes will be the current port address. */
+#define SK_RLMT_SPT_ROOT_PATH_COST0 0x00
+#define SK_RLMT_SPT_ROOT_PATH_COST1 0x00
+#define SK_RLMT_SPT_ROOT_PATH_COST2 0x00
+#define SK_RLMT_SPT_ROOT_PATH_COST3 0x00
+#define SK_RLMT_SPT_BRIDGE_ID0 0xFF /* Lowest possible priority. */
+#define SK_RLMT_SPT_BRIDGE_ID1 0xFF /* Lowest possible priority. */
+
+/* Remaining 6 bytes will be the current port address. */
+#define SK_RLMT_SPT_PORT_ID0 0xFF /* Lowest possible priority. */
+#define SK_RLMT_SPT_PORT_ID1 0xFF /* Lowest possible priority. */
+#define SK_RLMT_SPT_MSG_AGE0 0x00
+#define SK_RLMT_SPT_MSG_AGE1 0x00
+#define SK_RLMT_SPT_MAX_AGE0 0x00
+#define SK_RLMT_SPT_MAX_AGE1 0xFF
+#define SK_RLMT_SPT_HELLO_TIME0 0x00
+#define SK_RLMT_SPT_HELLO_TIME1 0xFF
+#define SK_RLMT_SPT_FWD_DELAY0 0x00
+#define SK_RLMT_SPT_FWD_DELAY1 0x40
+
+/* Size defines. */
+#define SK_RLMT_MIN_PACKET_SIZE 34
+#define SK_RLMT_MAX_PACKET_SIZE (SK_RLMT_MAX_TX_BUF_SIZE)
+#define SK_PACKET_DATA_LEN (SK_RLMT_MAX_PACKET_SIZE - \
+ SK_RLMT_MIN_PACKET_SIZE)
+
+/* ----- RLMT packet types ----- */
+#define SK_PACKET_ANNOUNCE 1 /* Port announcement. */
+#define SK_PACKET_ALIVE 2 /* Alive packet to port. */
+#define SK_PACKET_ADDR_CHANGED 3 /* Port address changed. */
+#define SK_PACKET_CHECK_TX 4 /* Check your tx line. */
+
+#ifdef SK_LITTLE_ENDIAN
+#define SK_U16_TO_NETWORK_ORDER(Val,Addr) { \
+ SK_U8 *_Addr = (SK_U8*)(Addr); \
+ SK_U16 _Val = (SK_U16)(Val); \
+ *_Addr++ = (SK_U8)(_Val >> 8); \
+ *_Addr = (SK_U8)(_Val & 0xFF); \
+}
+#endif /* SK_LITTLE_ENDIAN */
+
+#ifdef SK_BIG_ENDIAN
+#define SK_U16_TO_NETWORK_ORDER(Val,Addr) (*(SK_U16*)(Addr) = (SK_U16)(Val))
+#endif /* SK_BIG_ENDIAN */
+
+#define AUTONEG_FAILED SK_FALSE
+#define AUTONEG_SUCCESS SK_TRUE
+
+
+/* typedefs *******************************************************************/
+
+/* RLMT packet. Length: SK_RLMT_MAX_PACKET_SIZE (60) bytes. */
+typedef struct s_RlmtPacket {
+ SK_U8 DstAddr[SK_MAC_ADDR_LEN];
+ SK_U8 SrcAddr[SK_MAC_ADDR_LEN];
+ SK_U8 TypeLen[2];
+ SK_U8 DSap;
+ SK_U8 SSap;
+ SK_U8 Ctrl;
+ SK_U8 Indicator[7];
+ SK_U8 RlmtPacketType[2];
+ SK_U8 Align1[2];
+ SK_U8 Random[4]; /* Random value of requesting(!) station. */
+ SK_U8 RlmtPacketVersion[2]; /* RLMT Packet version. */
+ SK_U8 Data[SK_PACKET_DATA_LEN];
+} SK_RLMT_PACKET;
+
+typedef struct s_SpTreeRlmtPacket {
+ SK_U8 DstAddr[SK_MAC_ADDR_LEN];
+ SK_U8 SrcAddr[SK_MAC_ADDR_LEN];
+ SK_U8 TypeLen[2];
+ SK_U8 DSap;
+ SK_U8 SSap;
+ SK_U8 Ctrl;
+ SK_U8 ProtocolId[2];
+ SK_U8 ProtocolVersionId;
+ SK_U8 BpduType;
+ SK_U8 Flags;
+ SK_U8 RootId[8];
+ SK_U8 RootPathCost[4];
+ SK_U8 BridgeId[8];
+ SK_U8 PortId[2];
+ SK_U8 MessageAge[2];
+ SK_U8 MaxAge[2];
+ SK_U8 HelloTime[2];
+ SK_U8 ForwardDelay[2];
+} SK_SPTREE_PACKET;
+
+/* global variables ***********************************************************/
+
+SK_MAC_ADDR SkRlmtMcAddr = {{0x01, 0x00, 0x5A, 0x52, 0x4C, 0x4D}};
+SK_MAC_ADDR BridgeMcAddr = {{0x01, 0x80, 0xC2, 0x00, 0x00, 0x00}};
+SK_MAC_ADDR BcAddr = {{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}};
+
+/* local variables ************************************************************/
+
+/* None. */
+
+/* functions ******************************************************************/
+
+RLMT_STATIC void SkRlmtCheckSwitch(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 NetIdx);
+RLMT_STATIC void SkRlmtCheckSeg(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_U32 NetIdx);
+RLMT_STATIC void SkRlmtEvtSetNets(
+ SK_AC *pAC,
+ SK_IOC IoC,
+ SK_EVPARA Para);
+
+/******************************************************************************
+ *
+ * SkRlmtInit - initialize data, set state to init
+ *
+ * Description:
+ *
+ * SK_INIT_DATA
+ * ============
+ *
+ * This routine initializes all RLMT-related variables to a known state.
+ * The initial state is SK_RLMT_RS_INIT.
+ * All ports are initialized to SK_RLMT_PS_INIT.
+ *
+ *
+ * SK_INIT_IO
+ * ==========
+ *
+ * Nothing.
+ *
+ *
+ * SK_INIT_RUN
+ * ===========
+ *
+ * Determine the adapter's random value.
+ * Set the hw registers, the "logical MAC address", the
+ * RLMT multicast address, and eventually the BPDU multicast address.
+ *
+ * Context:
+ * init, pageable
+ *
+ * Returns:
+ * Nothing.
+ */
+void SkRlmtInit(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+int Level) /* Initialization Level */
+{
+ SK_U32 i, j;
+ SK_U64 Random;
+ SK_EVPARA Para;
+ SK_MAC_ADDR VirtualMacAddress;
+ SK_MAC_ADDR PhysicalAMacAddress;
+ SK_BOOL VirtualMacAddressSet;
+ SK_BOOL PhysicalAMacAddressSet;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT,
+ ("RLMT Init level %d.\n", Level))
+
+ switch (Level) {
+ case SK_INIT_DATA: /* Initialize data structures. */
+ SK_MEMSET((char *)&pAC->Rlmt, 0, sizeof(SK_RLMT));
+
+ for (i = 0; i < SK_MAX_MACS; i++) {
+ pAC->Rlmt.Port[i].PortState = SK_RLMT_PS_INIT;
+ pAC->Rlmt.Port[i].LinkDown = SK_TRUE;
+ pAC->Rlmt.Port[i].PortDown = SK_TRUE;
+ pAC->Rlmt.Port[i].PortStarted = SK_FALSE;
+ pAC->Rlmt.Port[i].PortNoRx = SK_FALSE;
+ pAC->Rlmt.Port[i].RootIdSet = SK_FALSE;
+ pAC->Rlmt.Port[i].PortNumber = i;
+ pAC->Rlmt.Port[i].Net = &pAC->Rlmt.Net[0];
+ pAC->Rlmt.Port[i].AddrPort = &pAC->Addr.Port[i];
+ }
+
+ pAC->Rlmt.NumNets = 1;
+ for (i = 0; i < SK_MAX_NETS; i++) {
+ pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT;
+ pAC->Rlmt.Net[i].RootIdSet = SK_FALSE;
+ pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT;
+ pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF; /* Automatic. */
+ /* Just assuming. */
+ pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort;
+ pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE;
+ pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL;
+ pAC->Rlmt.Net[i].NetNumber = i;
+ }
+
+ pAC->Rlmt.Net[0].Port[0] = &pAC->Rlmt.Port[0];
+ pAC->Rlmt.Net[0].Port[1] = &pAC->Rlmt.Port[1];
+#if SK_MAX_NETS > 1
+ pAC->Rlmt.Net[1].Port[0] = &pAC->Rlmt.Port[1];
+#endif /* SK_MAX_NETS > 1 */
+ break;
+
+ case SK_INIT_IO: /* GIMacsFound first available here. */
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT,
+ ("RLMT: %d MACs were detected.\n", pAC->GIni.GIMacsFound))
+
+ pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound;
+
+ /* Initialize HW registers? */
+ if (pAC->GIni.GIMacsFound == 1) {
+ Para.Para32[0] = SK_RLMT_MODE_CLS;
+ Para.Para32[1] = 0;
+ (void)SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE, Para);
+ }
+ break;
+
+ case SK_INIT_RUN:
+ /* Ensure RLMT is set to one net. */
+ if (pAC->Rlmt.NumNets > 1) {
+ Para.Para32[0] = 1;
+ Para.Para32[1] = -1;
+ SkRlmtEvtSetNets(pAC, IoC, Para);
+ }
+
+ for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+ Random = SkOsGetTime(pAC);
+ *(SK_U32*)&pAC->Rlmt.Port[i].Random = *(SK_U32*)&Random;
+
+ for (j = 0; j < 4; j++) {
+ pAC->Rlmt.Port[i].Random[j] ^= pAC->Rlmt.Port[i].AddrPort->
+ CurrentMacAddress.a[SK_MAC_ADDR_LEN - 1 - j];
+ }
+
+ (void)SkAddrMcClear(pAC, IoC, i, SK_ADDR_PERMANENT | SK_MC_SW_ONLY);
+
+ /* Add RLMT MC address. */
+ (void)SkAddrMcAdd(pAC, IoC, i, &SkRlmtMcAddr, SK_ADDR_PERMANENT);
+
+ if (pAC->Rlmt.Net[0].RlmtMode & SK_RLMT_CHECK_SEG) {
+ /* Add BPDU MC address. */
+ (void)SkAddrMcAdd(pAC, IoC, i, &BridgeMcAddr, SK_ADDR_PERMANENT);
+ }
+
+ (void)SkAddrMcUpdate(pAC, IoC, i);
+ }
+
+ VirtualMacAddressSet = SK_FALSE;
+ /* Read virtual MAC address from Control Register File. */
+ for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
+
+ SK_IN8(IoC, B2_MAC_1 + j, &VirtualMacAddress.a[j]);
+ VirtualMacAddressSet |= VirtualMacAddress.a[j];
+ }
+
+ PhysicalAMacAddressSet = SK_FALSE;
+ /* Read physical MAC address for MAC A from Control Register File. */
+ for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
+
+ SK_IN8(IoC, B2_MAC_2 + j, &PhysicalAMacAddress.a[j]);
+ PhysicalAMacAddressSet |= PhysicalAMacAddress.a[j];
+ }
+
+ /* check if the two mac addresses contain reasonable values */
+ if (!VirtualMacAddressSet || !PhysicalAMacAddressSet) {
+
+ pAC->Rlmt.RlmtOff = SK_TRUE;
+ }
+
+ /* if the two mac addresses are equal switch off the RLMT_PRE_LOOKAHEAD
+ and the RLMT_LOOKAHEAD macros */
+ else if (SK_ADDR_EQUAL(PhysicalAMacAddress.a, VirtualMacAddress.a)) {
+
+ pAC->Rlmt.RlmtOff = SK_TRUE;
+ }
+ else {
+ pAC->Rlmt.RlmtOff = SK_FALSE;
+ }
+ break;
+
+ default: /* error */
+ break;
+ }
+ return;
+} /* SkRlmtInit */
+
+
+/******************************************************************************
+ *
+ * SkRlmtBuildCheckChain - build the check chain
+ *
+ * Description:
+ * This routine builds the local check chain:
+ * - Each port that is up checks the next port.
+ * - The last port that is up checks the first port that is up.
+ *
+ * Notes:
+ * - Currently only local ports are considered when building the chain.
+ * - Currently the SuspectState is just reset;
+ * it would be better to save it ...
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtBuildCheckChain(
+SK_AC *pAC, /* Adapter Context */
+SK_U32 NetIdx) /* Net Number */
+{
+ SK_U32 i;
+ SK_U32 NumMacsUp;
+ SK_RLMT_PORT * FirstMacUp;
+ SK_RLMT_PORT * PrevMacUp;
+
+ FirstMacUp = NULL;
+ PrevMacUp = NULL;
+
+ if (!(pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) {
+ for (i = 0; i < pAC->Rlmt.Net[i].NumPorts; i++) {
+ pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0;
+ }
+ return; /* Done. */
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SkRlmtBuildCheckChain.\n"))
+
+ NumMacsUp = 0;
+
+ for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) {
+ pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0;
+ pAC->Rlmt.Net[NetIdx].Port[i]->PortsSuspect = 0;
+ pAC->Rlmt.Net[NetIdx].Port[i]->CheckingState &=
+ ~(SK_RLMT_PCS_RX | SK_RLMT_PCS_TX);
+
+ /*
+ * If more than two links are detected we should consider
+ * checking at least two other ports:
+ * 1. the next port that is not LinkDown and
+ * 2. the next port that is not PortDown.
+ */
+ if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) {
+ if (NumMacsUp == 0) {
+ FirstMacUp = pAC->Rlmt.Net[NetIdx].Port[i];
+ }
+ else {
+ PrevMacUp->PortCheck[
+ pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked].CheckAddr =
+ pAC->Rlmt.Net[NetIdx].Port[i]->AddrPort->CurrentMacAddress;
+ PrevMacUp->PortCheck[
+ PrevMacUp->PortsChecked].SuspectTx = SK_FALSE;
+ PrevMacUp->PortsChecked++;
+ }
+ PrevMacUp = pAC->Rlmt.Net[NetIdx].Port[i];
+ NumMacsUp++;
+ }
+ }
+
+ if (NumMacsUp > 1) {
+ PrevMacUp->PortCheck[PrevMacUp->PortsChecked].CheckAddr =
+ FirstMacUp->AddrPort->CurrentMacAddress;
+ PrevMacUp->PortCheck[PrevMacUp->PortsChecked].SuspectTx =
+ SK_FALSE;
+ PrevMacUp->PortsChecked++;
+ }
+
+#ifdef DEBUG
+ for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Port %d checks %d other ports: %2X.\n", i,
+ pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked,
+ pAC->Rlmt.Net[NetIdx].Port[i]->PortCheck[0].CheckAddr.a[5]))
+ }
+#endif /* DEBUG */
+
+ return;
+} /* SkRlmtBuildCheckChain */
+
+
+/******************************************************************************
+ *
+ * SkRlmtBuildPacket - build an RLMT packet
+ *
+ * Description:
+ * This routine sets up an RLMT packet.
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * NULL or pointer to RLMT mbuf
+ */
+RLMT_STATIC SK_MBUF *SkRlmtBuildPacket(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 PortNumber, /* Sending port */
+SK_U16 PacketType, /* RLMT packet type */
+SK_MAC_ADDR *SrcAddr, /* Source address */
+SK_MAC_ADDR *DestAddr) /* Destination address */
+{
+ int i;
+ SK_U16 Length;
+ SK_MBUF *pMb;
+ SK_RLMT_PACKET *pPacket;
+
+#ifdef DEBUG
+ SK_U8 CheckSrc = 0;
+ SK_U8 CheckDest = 0;
+
+ for (i = 0; i < SK_MAC_ADDR_LEN; ++i) {
+ CheckSrc |= SrcAddr->a[i];
+ CheckDest |= DestAddr->a[i];
+ }
+
+ if ((CheckSrc == 0) || (CheckDest == 0)) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_ERR,
+ ("SkRlmtBuildPacket: Invalid %s%saddr.\n",
+ (CheckSrc == 0 ? "Src" : ""), (CheckDest == 0 ? "Dest" : "")))
+ }
+#endif
+
+ if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) != NULL) {
+ pPacket = (SK_RLMT_PACKET*)pMb->pData;
+ for (i = 0; i < SK_MAC_ADDR_LEN; i++) {
+ pPacket->DstAddr[i] = DestAddr->a[i];
+ pPacket->SrcAddr[i] = SrcAddr->a[i];
+ }
+ pPacket->DSap = SK_RLMT_DSAP;
+ pPacket->SSap = SK_RLMT_SSAP;
+ pPacket->Ctrl = SK_RLMT_CTRL;
+ pPacket->Indicator[0] = SK_RLMT_INDICATOR0;
+ pPacket->Indicator[1] = SK_RLMT_INDICATOR1;
+ pPacket->Indicator[2] = SK_RLMT_INDICATOR2;
+ pPacket->Indicator[3] = SK_RLMT_INDICATOR3;
+ pPacket->Indicator[4] = SK_RLMT_INDICATOR4;
+ pPacket->Indicator[5] = SK_RLMT_INDICATOR5;
+ pPacket->Indicator[6] = SK_RLMT_INDICATOR6;
+
+ SK_U16_TO_NETWORK_ORDER(PacketType, &pPacket->RlmtPacketType[0]);
+
+ for (i = 0; i < 4; i++) {
+ pPacket->Random[i] = pAC->Rlmt.Port[PortNumber].Random[i];
+ }
+
+ SK_U16_TO_NETWORK_ORDER(
+ SK_RLMT_PACKET_VERSION, &pPacket->RlmtPacketVersion[0]);
+
+ for (i = 0; i < SK_PACKET_DATA_LEN; i++) {
+ pPacket->Data[i] = 0x00;
+ }
+
+ Length = SK_RLMT_MAX_PACKET_SIZE; /* Or smaller. */
+ pMb->Length = Length;
+ pMb->PortIdx = PortNumber;
+ Length -= 14;
+ SK_U16_TO_NETWORK_ORDER(Length, &pPacket->TypeLen[0]);
+
+ if (PacketType == SK_PACKET_ALIVE) {
+ pAC->Rlmt.Port[PortNumber].TxHelloCts++;
+ }
+ }
+
+ return (pMb);
+} /* SkRlmtBuildPacket */
+
+
+/******************************************************************************
+ *
+ * SkRlmtBuildSpanningTreePacket - build spanning tree check packet
+ *
+ * Description:
+ * This routine sets up a BPDU packet for spanning tree check.
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * NULL or pointer to RLMT mbuf
+ */
+RLMT_STATIC SK_MBUF *SkRlmtBuildSpanningTreePacket(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 PortNumber) /* Sending port */
+{
+ unsigned i;
+ SK_U16 Length;
+ SK_MBUF *pMb;
+ SK_SPTREE_PACKET *pSPacket;
+
+ if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) !=
+ NULL) {
+ pSPacket = (SK_SPTREE_PACKET*)pMb->pData;
+ for (i = 0; i < SK_MAC_ADDR_LEN; i++) {
+ pSPacket->DstAddr[i] = BridgeMcAddr.a[i];
+ pSPacket->SrcAddr[i] =
+ pAC->Addr.Port[PortNumber].CurrentMacAddress.a[i];
+ }
+ pSPacket->DSap = SK_RLMT_SPT_DSAP;
+ pSPacket->SSap = SK_RLMT_SPT_SSAP;
+ pSPacket->Ctrl = SK_RLMT_SPT_CTRL;
+
+ pSPacket->ProtocolId[0] = SK_RLMT_SPT_PROTOCOL_ID0;
+ pSPacket->ProtocolId[1] = SK_RLMT_SPT_PROTOCOL_ID1;
+ pSPacket->ProtocolVersionId = SK_RLMT_SPT_PROTOCOL_VERSION_ID;
+ pSPacket->BpduType = SK_RLMT_SPT_BPDU_TYPE;
+ pSPacket->Flags = SK_RLMT_SPT_FLAGS;
+ pSPacket->RootId[0] = SK_RLMT_SPT_ROOT_ID0;
+ pSPacket->RootId[1] = SK_RLMT_SPT_ROOT_ID1;
+ pSPacket->RootPathCost[0] = SK_RLMT_SPT_ROOT_PATH_COST0;
+ pSPacket->RootPathCost[1] = SK_RLMT_SPT_ROOT_PATH_COST1;
+ pSPacket->RootPathCost[2] = SK_RLMT_SPT_ROOT_PATH_COST2;
+ pSPacket->RootPathCost[3] = SK_RLMT_SPT_ROOT_PATH_COST3;
+ pSPacket->BridgeId[0] = SK_RLMT_SPT_BRIDGE_ID0;
+ pSPacket->BridgeId[1] = SK_RLMT_SPT_BRIDGE_ID1;
+
+ /*
+ * Use logical MAC address as bridge ID and filter these packets
+ * on receive.
+ */
+ for (i = 0; i < SK_MAC_ADDR_LEN; i++) {
+ pSPacket->BridgeId[i + 2] = pSPacket->RootId[i + 2] =
+ pAC->Addr.Net[pAC->Rlmt.Port[PortNumber].Net->NetNumber].
+ CurrentMacAddress.a[i];
+ }
+ pSPacket->PortId[0] = SK_RLMT_SPT_PORT_ID0;
+ pSPacket->PortId[1] = SK_RLMT_SPT_PORT_ID1;
+ pSPacket->MessageAge[0] = SK_RLMT_SPT_MSG_AGE0;
+ pSPacket->MessageAge[1] = SK_RLMT_SPT_MSG_AGE1;
+ pSPacket->MaxAge[0] = SK_RLMT_SPT_MAX_AGE0;
+ pSPacket->MaxAge[1] = SK_RLMT_SPT_MAX_AGE1;
+ pSPacket->HelloTime[0] = SK_RLMT_SPT_HELLO_TIME0;
+ pSPacket->HelloTime[1] = SK_RLMT_SPT_HELLO_TIME1;
+ pSPacket->ForwardDelay[0] = SK_RLMT_SPT_FWD_DELAY0;
+ pSPacket->ForwardDelay[1] = SK_RLMT_SPT_FWD_DELAY1;
+
+ Length = SK_RLMT_MAX_PACKET_SIZE; /* Or smaller. */
+ pMb->Length = Length;
+ pMb->PortIdx = PortNumber;
+ Length -= 14;
+ SK_U16_TO_NETWORK_ORDER(Length, &pSPacket->TypeLen[0]);
+
+ pAC->Rlmt.Port[PortNumber].TxSpHelloReqCts++;
+ }
+
+ return (pMb);
+} /* SkRlmtBuildSpanningTreePacket */
+
+
+/******************************************************************************
+ *
+ * SkRlmtSend - build and send check packets
+ *
+ * Description:
+ * Depending on the RLMT state and the checking state, several packets
+ * are sent through the indicated port.
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * Nothing.
+ */
+RLMT_STATIC void SkRlmtSend(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 PortNumber) /* Sending port */
+{
+ unsigned j;
+ SK_EVPARA Para;
+ SK_RLMT_PORT *pRPort;
+
+ pRPort = &pAC->Rlmt.Port[PortNumber];
+ if (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) {
+ if (pRPort->CheckingState & (SK_RLMT_PCS_TX | SK_RLMT_PCS_RX)) {
+ /* Port is suspicious. Send the RLMT packet to the RLMT mc addr. */
+ if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber,
+ SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress,
+ &SkRlmtMcAddr)) != NULL) {
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+ }
+ }
+ else {
+ /*
+ * Send a directed RLMT packet to all ports that are
+ * checked by the indicated port.
+ */
+ for (j = 0; j < pRPort->PortsChecked; j++) {
+ if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber,
+ SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress,
+ &pRPort->PortCheck[j].CheckAddr)) != NULL) {
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+ }
+ }
+ }
+ }
+
+ if ((pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) &&
+ (pAC->Rlmt.Port[PortNumber].Net->CheckingState & SK_RLMT_RCS_SEND_SEG)) {
+ /*
+ * Send a BPDU packet to make a connected switch tell us
+ * the correct root bridge.
+ */
+ if ((Para.pParaPtr =
+ SkRlmtBuildSpanningTreePacket(pAC, IoC, PortNumber)) != NULL) {
+ pAC->Rlmt.Port[PortNumber].Net->CheckingState &= ~SK_RLMT_RCS_SEND_SEG;
+ pRPort->RootIdSet = SK_FALSE;
+
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_TX,
+ ("SkRlmtSend: BPDU Packet on Port %u.\n", PortNumber))
+ }
+ }
+ return;
+} /* SkRlmtSend */
+
+
+/******************************************************************************
+ *
+ * SkRlmtPortReceives - check if port is (going) down and bring it up
+ *
+ * Description:
+ * This routine checks if a port who received a non-BPDU packet
+ * needs to go up or needs to be stopped going down.
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * Nothing.
+ */
+RLMT_STATIC void SkRlmtPortReceives(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 PortNumber) /* Port to check */
+{
+ SK_RLMT_PORT *pRPort;
+ SK_EVPARA Para;
+
+ pRPort = &pAC->Rlmt.Port[PortNumber];
+ pRPort->PortNoRx = SK_FALSE;
+
+ if ((pRPort->PortState == SK_RLMT_PS_DOWN) &&
+ !(pRPort->CheckingState & SK_RLMT_PCS_TX)) {
+ /*
+ * Port is marked down (rx), but received a non-BPDU packet.
+ * Bring it up.
+ */
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: Received on PortDown.\n"))
+
+ pRPort->PortState = SK_RLMT_PS_GOING_UP;
+ pRPort->GuTimeStamp = SkOsGetTime(pAC);
+ Para.Para32[0] = PortNumber;
+ Para.Para32[1] = (SK_U32)-1;
+ SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL,
+ SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para);
+ pRPort->CheckingState &= ~SK_RLMT_PCS_RX;
+ /* pAC->Rlmt.CheckSwitch = SK_TRUE; */
+ SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
+ } /* PortDown && !SuspectTx */
+ else if (pRPort->CheckingState & SK_RLMT_PCS_RX) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: Stop bringing port down.\n"))
+ SkTimerStop(pAC, IoC, &pRPort->DownRxTimer);
+ pRPort->CheckingState &= ~SK_RLMT_PCS_RX;
+ /* pAC->Rlmt.CheckSwitch = SK_TRUE; */
+ SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
+ } /* PortGoingDown */
+
+ return;
+} /* SkRlmtPortReceives */
+
+
+/******************************************************************************
+ *
+ * SkRlmtPacketReceive - receive a packet for closer examination
+ *
+ * Description:
+ * This routine examines a packet more closely than SK_RLMT_LOOKAHEAD.
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * Nothing.
+ */
+RLMT_STATIC void SkRlmtPacketReceive(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_MBUF *pMb) /* Received packet */
+{
+#ifdef xDEBUG
+ extern void DumpData(char *p, int size);
+#endif /* DEBUG */
+ int i;
+ unsigned j;
+ SK_U16 PacketType;
+ SK_U32 PortNumber;
+ SK_ADDR_PORT *pAPort;
+ SK_RLMT_PORT *pRPort;
+ SK_RLMT_PACKET *pRPacket;
+ SK_SPTREE_PACKET *pSPacket;
+ SK_EVPARA Para;
+
+ PortNumber = pMb->PortIdx;
+ pAPort = &pAC->Addr.Port[PortNumber];
+ pRPort = &pAC->Rlmt.Port[PortNumber];
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: PortNumber == %d.\n", PortNumber))
+
+ pRPacket = (SK_RLMT_PACKET*)pMb->pData;
+ pSPacket = (SK_SPTREE_PACKET*)pRPacket;
+
+#ifdef xDEBUG
+ DumpData((char *)pRPacket, 32);
+#endif /* DEBUG */
+
+ if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) != 0) {
+ SkRlmtPortReceives(pAC, IoC, PortNumber);
+ }
+
+ /* Check destination address. */
+
+ if (!SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->DstAddr) &&
+ !SK_ADDR_EQUAL(SkRlmtMcAddr.a, pRPacket->DstAddr) &&
+ !SK_ADDR_EQUAL(BridgeMcAddr.a, pRPacket->DstAddr)) {
+
+ /* Not sent to current MAC or registered MC address => Trash it. */
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: Not for me.\n"))
+
+ SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+ return;
+ }
+ else if (SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->SrcAddr)) {
+
+ /*
+ * Was sent by same port (may happen during port switching
+ * or in case of duplicate MAC addresses).
+ */
+
+ /*
+ * Check for duplicate address here:
+ * If Packet.Random != My.Random => DupAddr.
+ */
+ for (i = 3; i >= 0; i--) {
+ if (pRPort->Random[i] != pRPacket->Random[i]) {
+ break;
+ }
+ }
+
+ /*
+ * CAUTION: Do not check for duplicate MAC address in RLMT Alive Reply
+ * packets (they have the LLC_COMMAND_RESPONSE_BIT set in
+ * pRPacket->SSap).
+ */
+ if (i >= 0 && pRPacket->DSap == SK_RLMT_DSAP &&
+ pRPacket->Ctrl == SK_RLMT_CTRL &&
+ pRPacket->SSap == SK_RLMT_SSAP &&
+ pRPacket->Indicator[0] == SK_RLMT_INDICATOR0 &&
+ pRPacket->Indicator[1] == SK_RLMT_INDICATOR1 &&
+ pRPacket->Indicator[2] == SK_RLMT_INDICATOR2 &&
+ pRPacket->Indicator[3] == SK_RLMT_INDICATOR3 &&
+ pRPacket->Indicator[4] == SK_RLMT_INDICATOR4 &&
+ pRPacket->Indicator[5] == SK_RLMT_INDICATOR5 &&
+ pRPacket->Indicator[6] == SK_RLMT_INDICATOR6) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: Duplicate MAC Address.\n"))
+
+ /* Error Log entry. */
+ SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E006, SKERR_RLMT_E006_MSG);
+ }
+ else {
+ /* Simply trash it. */
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: Sent by me.\n"))
+ }
+
+ SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+ return;
+ }
+
+ /* Check SuspectTx entries. */
+ if (pRPort->PortsSuspect > 0) {
+ for (j = 0; j < pRPort->PortsChecked; j++) {
+ if (pRPort->PortCheck[j].SuspectTx &&
+ SK_ADDR_EQUAL(
+ pRPacket->SrcAddr, pRPort->PortCheck[j].CheckAddr.a)) {
+ pRPort->PortCheck[j].SuspectTx = SK_FALSE;
+ pRPort->PortsSuspect--;
+ break;
+ }
+ }
+ }
+
+ /* Determine type of packet. */
+ if (pRPacket->DSap == SK_RLMT_DSAP &&
+ pRPacket->Ctrl == SK_RLMT_CTRL &&
+ (pRPacket->SSap & ~LLC_COMMAND_RESPONSE_BIT) == SK_RLMT_SSAP &&
+ pRPacket->Indicator[0] == SK_RLMT_INDICATOR0 &&
+ pRPacket->Indicator[1] == SK_RLMT_INDICATOR1 &&
+ pRPacket->Indicator[2] == SK_RLMT_INDICATOR2 &&
+ pRPacket->Indicator[3] == SK_RLMT_INDICATOR3 &&
+ pRPacket->Indicator[4] == SK_RLMT_INDICATOR4 &&
+ pRPacket->Indicator[5] == SK_RLMT_INDICATOR5 &&
+ pRPacket->Indicator[6] == SK_RLMT_INDICATOR6) {
+
+ /* It's an RLMT packet. */
+ PacketType = (SK_U16)((pRPacket->RlmtPacketType[0] << 8) |
+ pRPacket->RlmtPacketType[1]);
+
+ switch (PacketType) {
+ case SK_PACKET_ANNOUNCE: /* Not yet used. */
+#if 0
+ /* Build the check chain. */
+ SkRlmtBuildCheckChain(pAC);
+#endif /* 0 */
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: Announce.\n"))
+
+ SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+ break;
+
+ case SK_PACKET_ALIVE:
+ if (pRPacket->SSap & LLC_COMMAND_RESPONSE_BIT) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: Alive Reply.\n"))
+
+ if (!(pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_LLC) ||
+ SK_ADDR_EQUAL(
+ pRPacket->DstAddr, pAPort->CurrentMacAddress.a)) {
+ /* Obviously we could send something. */
+ if (pRPort->CheckingState & SK_RLMT_PCS_TX) {
+ pRPort->CheckingState &= ~SK_RLMT_PCS_TX;
+ SkTimerStop(pAC, IoC, &pRPort->DownTxTimer);
+ }
+
+ if ((pRPort->PortState == SK_RLMT_PS_DOWN) &&
+ !(pRPort->CheckingState & SK_RLMT_PCS_RX)) {
+ pRPort->PortState = SK_RLMT_PS_GOING_UP;
+ pRPort->GuTimeStamp = SkOsGetTime(pAC);
+
+ SkTimerStop(pAC, IoC, &pRPort->DownTxTimer);
+
+ Para.Para32[0] = PortNumber;
+ Para.Para32[1] = (SK_U32)-1;
+ SkTimerStart(pAC, IoC, &pRPort->UpTimer,
+ SK_RLMT_PORTUP_TIM_VAL, SKGE_RLMT,
+ SK_RLMT_PORTUP_TIM, Para);
+ }
+ }
+
+ /* Mark sending port as alive? */
+ SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+ }
+ else { /* Alive Request Packet. */
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: Alive Request.\n"))
+
+ pRPort->RxHelloCts++;
+
+ /* Answer. */
+ for (i = 0; i < SK_MAC_ADDR_LEN; i++) {
+ pRPacket->DstAddr[i] = pRPacket->SrcAddr[i];
+ pRPacket->SrcAddr[i] =
+ pAC->Addr.Port[PortNumber].CurrentMacAddress.a[i];
+ }
+ pRPacket->SSap |= LLC_COMMAND_RESPONSE_BIT;
+
+ Para.pParaPtr = pMb;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+ }
+ break;
+
+ case SK_PACKET_CHECK_TX:
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: Check your tx line.\n"))
+
+ /* A port checking us requests us to check our tx line. */
+ pRPort->CheckingState |= SK_RLMT_PCS_TX;
+
+ /* Start PortDownTx timer. */
+ Para.Para32[0] = PortNumber;
+ Para.Para32[1] = (SK_U32)-1;
+ SkTimerStart(pAC, IoC, &pRPort->DownTxTimer,
+ SK_RLMT_PORTDOWN_TIM_VAL, SKGE_RLMT,
+ SK_RLMT_PORTDOWN_TX_TIM, Para);
+
+ SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+
+ if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber,
+ SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress,
+ &SkRlmtMcAddr)) != NULL) {
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+ }
+ break;
+
+ case SK_PACKET_ADDR_CHANGED:
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: Address Change.\n"))
+
+ /* Build the check chain. */
+ SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber);
+ SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+ break;
+
+ default:
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: Unknown RLMT packet.\n"))
+
+ /* RA;:;: ??? */
+ SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+ }
+ }
+ else if (pSPacket->DSap == SK_RLMT_SPT_DSAP &&
+ pSPacket->Ctrl == SK_RLMT_SPT_CTRL &&
+ (pSPacket->SSap & ~LLC_COMMAND_RESPONSE_BIT) == SK_RLMT_SPT_SSAP) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: BPDU Packet.\n"))
+
+ /* Spanning Tree packet. */
+ pRPort->RxSpHelloCts++;
+
+ if (!SK_ADDR_EQUAL(&pSPacket->RootId[2], &pAC->Addr.Net[pAC->Rlmt.
+ Port[PortNumber].Net->NetNumber].CurrentMacAddress.a[0])) {
+ /*
+ * Check segmentation if a new root bridge is set and
+ * the segmentation check is not currently running.
+ */
+ if (!SK_ADDR_EQUAL(&pSPacket->RootId[2], &pRPort->Root.Id[2]) &&
+ (pAC->Rlmt.Port[PortNumber].Net->LinksUp > 1) &&
+ (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG)
+ != 0 && (pAC->Rlmt.Port[PortNumber].Net->CheckingState &
+ SK_RLMT_RCS_SEG) == 0) {
+ pAC->Rlmt.Port[PortNumber].Net->CheckingState |=
+ SK_RLMT_RCS_START_SEG | SK_RLMT_RCS_SEND_SEG;
+ }
+
+ /* Store tree view of this port. */
+ for (i = 0; i < 8; i++) {
+ pRPort->Root.Id[i] = pSPacket->RootId[i];
+ }
+ pRPort->RootIdSet = SK_TRUE;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_DUMP,
+ ("Root ID %d: %02x %02x %02x %02x %02x %02x %02x %02x.\n",
+ PortNumber,
+ pRPort->Root.Id[0], pRPort->Root.Id[1],
+ pRPort->Root.Id[2], pRPort->Root.Id[3],
+ pRPort->Root.Id[4], pRPort->Root.Id[5],
+ pRPort->Root.Id[6], pRPort->Root.Id[7]))
+ }
+
+ SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+ if ((pAC->Rlmt.Port[PortNumber].Net->CheckingState &
+ SK_RLMT_RCS_REPORT_SEG) != 0) {
+ SkRlmtCheckSeg(pAC, IoC, pAC->Rlmt.Port[PortNumber].Net->NetNumber);
+ }
+ }
+ else {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+ ("SkRlmtPacketReceive: Unknown Packet Type.\n"))
+
+ /* Unknown packet. */
+ SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+ }
+ return;
+} /* SkRlmtPacketReceive */
+
+
+/******************************************************************************
+ *
+ * SkRlmtCheckPort - check if a port works
+ *
+ * Description:
+ * This routine checks if a port whose link is up received something
+ * and if it seems to transmit successfully.
+ *
+ * # PortState: PsInit, PsLinkDown, PsDown, PsGoingUp, PsUp
+ * # PortCheckingState (Bitfield): ChkTx, ChkRx, ChkSeg
+ * # RlmtCheckingState (Bitfield): ChkSeg, StartChkSeg, ReportSeg
+ *
+ * if (Rx - RxBpdu == 0) { # No rx.
+ * if (state == PsUp) {
+ * PortCheckingState |= ChkRx
+ * }
+ * if (ModeCheckSeg && (Timeout ==
+ * TO_SHORTEN(RLMT_DEFAULT_TIMEOUT))) {
+ * RlmtCheckingState |= ChkSeg)
+ * PortCheckingState |= ChkSeg
+ * }
+ * NewTimeout = TO_SHORTEN(Timeout)
+ * if (NewTimeout < RLMT_MIN_TIMEOUT) {
+ * NewTimeout = RLMT_MIN_TIMEOUT
+ * PortState = PsDown
+ * ...
+ * }
+ * }
+ * else { # something was received
+ * # Set counter to 0 at LinkDown?
+ * # No - rx may be reported after LinkDown ???
+ * PortCheckingState &= ~ChkRx
+ * NewTimeout = RLMT_DEFAULT_TIMEOUT
+ * if (RxAck == 0) {
+ * possible reasons:
+ * is my tx line bad? --
+ * send RLMT multicast and report
+ * back internally? (only possible
+ * between ports on same adapter)
+ * }
+ * if (RxChk == 0) {
+ * possible reasons:
+ * - tx line of port set to check me
+ * maybe bad
+ * - no other port/adapter available or set
+ * to check me
+ * - adapter checking me has a longer
+ * timeout
+ * ??? anything that can be done here?
+ * }
+ * }
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * New timeout value.
+ */
+RLMT_STATIC SK_U32 SkRlmtCheckPort(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 PortNumber) /* Port to check */
+{
+ unsigned i;
+ SK_U32 NewTimeout;
+ SK_RLMT_PORT *pRPort;
+ SK_EVPARA Para;
+
+ pRPort = &pAC->Rlmt.Port[PortNumber];
+
+ if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) == 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SkRlmtCheckPort %d: No (%d) receives in last time slot.\n",
+ PortNumber, pRPort->PacketsPerTimeSlot))
+
+ /*
+ * Check segmentation if there was no receive at least twice
+ * in a row (PortNoRx is already set) and the segmentation
+ * check is not currently running.
+ */
+
+ if (pRPort->PortNoRx && (pAC->Rlmt.Port[PortNumber].Net->LinksUp > 1) &&
+ (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) &&
+ !(pAC->Rlmt.Port[PortNumber].Net->CheckingState & SK_RLMT_RCS_SEG)) {
+ pAC->Rlmt.Port[PortNumber].Net->CheckingState |=
+ SK_RLMT_RCS_START_SEG | SK_RLMT_RCS_SEND_SEG;
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SkRlmtCheckPort: PortsSuspect %d, PcsRx %d.\n",
+ pRPort->PortsSuspect, pRPort->CheckingState & SK_RLMT_PCS_RX))
+
+ if (pRPort->PortState != SK_RLMT_PS_DOWN) {
+ NewTimeout = TO_SHORTEN(pAC->Rlmt.Port[PortNumber].Net->TimeoutValue);
+ if (NewTimeout < SK_RLMT_MIN_TO_VAL) {
+ NewTimeout = SK_RLMT_MIN_TO_VAL;
+ }
+
+ if (!(pRPort->CheckingState & SK_RLMT_PCS_RX)) {
+ Para.Para32[0] = PortNumber;
+ pRPort->CheckingState |= SK_RLMT_PCS_RX;
+
+ /*
+ * What shall we do if the port checked by this one receives
+ * our request frames? What's bad - our rx line or his tx line?
+ */
+ Para.Para32[1] = (SK_U32)-1;
+ SkTimerStart(pAC, IoC, &pRPort->DownRxTimer,
+ SK_RLMT_PORTDOWN_TIM_VAL, SKGE_RLMT,
+ SK_RLMT_PORTDOWN_RX_TIM, Para);
+
+ for (i = 0; i < pRPort->PortsChecked; i++) {
+ if (pRPort->PortCheck[i].SuspectTx) {
+ continue;
+ }
+ pRPort->PortCheck[i].SuspectTx = SK_TRUE;
+ pRPort->PortsSuspect++;
+ if ((Para.pParaPtr =
+ SkRlmtBuildPacket(pAC, IoC, PortNumber, SK_PACKET_CHECK_TX,
+ &pAC->Addr.Port[PortNumber].CurrentMacAddress,
+ &pRPort->PortCheck[i].CheckAddr)) != NULL) {
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+ }
+ }
+ }
+ }
+ else { /* PortDown -- or all partners suspect. */
+ NewTimeout = SK_RLMT_DEF_TO_VAL;
+ }
+ pRPort->PortNoRx = SK_TRUE;
+ }
+ else { /* A non-BPDU packet was received. */
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SkRlmtCheckPort %d: %d (%d) receives in last time slot.\n",
+ PortNumber,
+ pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot,
+ pRPort->PacketsPerTimeSlot))
+
+ SkRlmtPortReceives(pAC, IoC, PortNumber);
+ if (pAC->Rlmt.CheckSwitch) {
+ SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
+ }
+
+ NewTimeout = SK_RLMT_DEF_TO_VAL;
+ }
+
+ return (NewTimeout);
+} /* SkRlmtCheckPort */
+
+
+/******************************************************************************
+ *
+ * SkRlmtSelectBcRx - select new active port, criteria 1 (CLP)
+ *
+ * Description:
+ * This routine selects the port that received a broadcast frame
+ * substantially later than all other ports.
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * SK_BOOL
+ */
+RLMT_STATIC SK_BOOL SkRlmtSelectBcRx(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 Active, /* Active port */
+SK_U32 PrefPort, /* Preferred port */
+SK_U32 *pSelect) /* New active port */
+{
+ SK_U64 BcTimeStamp;
+ SK_U32 i;
+ SK_BOOL PortFound;
+
+ BcTimeStamp = 0; /* Not totally necessary, but feeling better. */
+ PortFound = SK_FALSE;
+
+ /* Select port with the latest TimeStamp. */
+ for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("TimeStamp Port %d (Down: %d, NoRx: %d): %08x %08x.\n",
+ i,
+ pAC->Rlmt.Port[i].PortDown, pAC->Rlmt.Port[i].PortNoRx,
+ *((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_HI32),
+ *((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_LO32)))
+
+ if (!pAC->Rlmt.Port[i].PortDown && !pAC->Rlmt.Port[i].PortNoRx) {
+ if (!PortFound || pAC->Rlmt.Port[i].BcTimeStamp > BcTimeStamp) {
+ BcTimeStamp = pAC->Rlmt.Port[i].BcTimeStamp;
+ *pSelect = i;
+ PortFound = SK_TRUE;
+ }
+ }
+ }
+
+ if (PortFound) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Port %d received the last broadcast.\n", *pSelect))
+
+ /* Look if another port's time stamp is similar. */
+ for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+ if (i == *pSelect) {
+ continue;
+ }
+ if (!pAC->Rlmt.Port[i].PortDown && !pAC->Rlmt.Port[i].PortNoRx &&
+ (pAC->Rlmt.Port[i].BcTimeStamp >
+ BcTimeStamp - SK_RLMT_BC_DELTA ||
+ pAC->Rlmt.Port[i].BcTimeStamp +
+ SK_RLMT_BC_DELTA > BcTimeStamp)) {
+ PortFound = SK_FALSE;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Port %d received a broadcast at a similar time.\n", i))
+ break;
+ }
+ }
+ }
+
+#ifdef DEBUG
+ if (PortFound) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SELECT_BCRX found Port %d receiving the substantially "
+ "latest broadcast (%u).\n",
+ *pSelect,
+ BcTimeStamp - pAC->Rlmt.Port[1 - *pSelect].BcTimeStamp))
+ }
+#endif /* DEBUG */
+
+ return (PortFound);
+} /* SkRlmtSelectBcRx */
+
+
+/******************************************************************************
+ *
+ * SkRlmtSelectNotSuspect - select new active port, criteria 2 (CLP)
+ *
+ * Description:
+ * This routine selects a good port (it is PortUp && !SuspectRx).
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * SK_BOOL
+ */
+RLMT_STATIC SK_BOOL SkRlmtSelectNotSuspect(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 Active, /* Active port */
+SK_U32 PrefPort, /* Preferred port */
+SK_U32 *pSelect) /* New active port */
+{
+ SK_U32 i;
+ SK_BOOL PortFound;
+
+ PortFound = SK_FALSE;
+
+ /* Select first port that is PortUp && !SuspectRx. */
+ for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+ if (!pAC->Rlmt.Port[i].PortDown &&
+ !(pAC->Rlmt.Port[i].CheckingState & SK_RLMT_PCS_RX)) {
+ *pSelect = i;
+ if (!pAC->Rlmt.Port[Active].PortDown &&
+ !(pAC->Rlmt.Port[Active].CheckingState & SK_RLMT_PCS_RX)) {
+ *pSelect = Active;
+ }
+ if (!pAC->Rlmt.Port[PrefPort].PortDown &&
+ !(pAC->Rlmt.Port[PrefPort].CheckingState & SK_RLMT_PCS_RX)) {
+ *pSelect = PrefPort;
+ }
+ PortFound = SK_TRUE;
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SELECT_NOTSUSPECT found Port %d up and not check RX.\n",
+ *pSelect))
+ break;
+ }
+ }
+ return (PortFound);
+} /* SkRlmtSelectNotSuspect */
+
+
+/******************************************************************************
+ *
+ * SkRlmtSelectUp - select new active port, criteria 3, 4 (CLP)
+ *
+ * Description:
+ * This routine selects a port that is up.
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * SK_BOOL
+ */
+RLMT_STATIC SK_BOOL SkRlmtSelectUp(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 Active, /* Active port */
+SK_U32 PrefPort, /* Preferred port */
+SK_U32 *pSelect, /* New active port */
+SK_BOOL AutoNegDone) /* Successfully auto-negotiated? */
+{
+ SK_U32 i;
+ SK_BOOL PortFound;
+
+ PortFound = SK_FALSE;
+
+ /* Select first port that is PortUp. */
+ for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+ if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_UP &&
+ pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) {
+ *pSelect = i;
+ if (pAC->Rlmt.Port[Active].PortState == SK_RLMT_PS_UP &&
+ pAC->GIni.GP[Active].PAutoNegFail != AutoNegDone) {
+ *pSelect = Active;
+ }
+ if (pAC->Rlmt.Port[PrefPort].PortState == SK_RLMT_PS_UP &&
+ pAC->GIni.GP[PrefPort].PAutoNegFail != AutoNegDone) {
+ *pSelect = PrefPort;
+ }
+ PortFound = SK_TRUE;
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SELECT_UP found Port %d up.\n", *pSelect))
+ break;
+ }
+ }
+ return (PortFound);
+} /* SkRlmtSelectUp */
+
+
+/******************************************************************************
+ *
+ * SkRlmtSelectGoingUp - select new active port, criteria 5, 6 (CLP)
+ *
+ * Description:
+ * This routine selects the port that is going up for the longest time.
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * SK_BOOL
+ */
+RLMT_STATIC SK_BOOL SkRlmtSelectGoingUp(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 Active, /* Active port */
+SK_U32 PrefPort, /* Preferred port */
+SK_U32 *pSelect, /* New active port */
+SK_BOOL AutoNegDone) /* Successfully auto-negotiated? */
+{
+ SK_U64 GuTimeStamp;
+ SK_U32 i;
+ SK_BOOL PortFound;
+
+ GuTimeStamp = 0;
+ PortFound = SK_FALSE;
+
+ /* Select port that is PortGoingUp for the longest time. */
+ for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+ if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_GOING_UP &&
+ pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) {
+ GuTimeStamp = pAC->Rlmt.Port[i].GuTimeStamp;
+ *pSelect = i;
+ PortFound = SK_TRUE;
+ break;
+ }
+ }
+
+ if (!PortFound) {
+ return (SK_FALSE);
+ }
+
+ for (i = *pSelect + 1; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+ if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_GOING_UP &&
+ pAC->Rlmt.Port[i].GuTimeStamp < GuTimeStamp &&
+ pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) {
+ GuTimeStamp = pAC->Rlmt.Port[i].GuTimeStamp;
+ *pSelect = i;
+ }
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SELECT_GOINGUP found Port %d going up.\n", *pSelect))
+ return (SK_TRUE);
+} /* SkRlmtSelectGoingUp */
+
+
+/******************************************************************************
+ *
+ * SkRlmtSelectDown - select new active port, criteria 7, 8 (CLP)
+ *
+ * Description:
+ * This routine selects a port that is down.
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * SK_BOOL
+ */
+RLMT_STATIC SK_BOOL SkRlmtSelectDown(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 Active, /* Active port */
+SK_U32 PrefPort, /* Preferred port */
+SK_U32 *pSelect, /* New active port */
+SK_BOOL AutoNegDone) /* Successfully auto-negotiated? */
+{
+ SK_U32 i;
+ SK_BOOL PortFound;
+
+ PortFound = SK_FALSE;
+
+ /* Select first port that is PortDown. */
+ for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+ if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_DOWN &&
+ pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) {
+ *pSelect = i;
+ if (pAC->Rlmt.Port[Active].PortState == SK_RLMT_PS_DOWN &&
+ pAC->GIni.GP[Active].PAutoNegFail != AutoNegDone) {
+ *pSelect = Active;
+ }
+ if (pAC->Rlmt.Port[PrefPort].PortState == SK_RLMT_PS_DOWN &&
+ pAC->GIni.GP[PrefPort].PAutoNegFail != AutoNegDone) {
+ *pSelect = PrefPort;
+ }
+ PortFound = SK_TRUE;
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SELECT_DOWN found Port %d down.\n", *pSelect))
+ break;
+ }
+ }
+ return (PortFound);
+} /* SkRlmtSelectDown */
+
+
+/******************************************************************************
+ *
+ * SkRlmtCheckSwitch - select new active port and switch to it
+ *
+ * Description:
+ * This routine decides which port should be the active one and queues
+ * port switching if necessary.
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * Nothing.
+ */
+RLMT_STATIC void SkRlmtCheckSwitch(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 NetIdx) /* Net index */
+{
+ SK_EVPARA Para;
+ SK_U32 Active;
+ SK_U32 PrefPort;
+ SK_U32 i;
+ SK_BOOL PortFound;
+
+ Active = pAC->Rlmt.Net[NetIdx].ActivePort; /* Index of active port. */
+ PrefPort = pAC->Rlmt.Net[NetIdx].PrefPort; /* Index of preferred port. */
+ PortFound = SK_FALSE;
+ pAC->Rlmt.CheckSwitch = SK_FALSE;
+
+#if 0 /* RW 2001/10/18 - active port becomes always prefered one */
+ if (pAC->Rlmt.Net[NetIdx].Preference == 0xFFFFFFFF) { /* Automatic */
+ /* disable auto-fail back */
+ PrefPort = Active;
+ }
+#endif
+
+ if (pAC->Rlmt.Net[NetIdx].LinksUp == 0) {
+ /* Last link went down - shut down the net. */
+ pAC->Rlmt.Net[NetIdx].RlmtState = SK_RLMT_RS_NET_DOWN;
+ Para.Para32[0] = SK_RLMT_NET_DOWN_TEMP;
+ Para.Para32[1] = NetIdx;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_DOWN, Para);
+
+ Para.Para32[0] = pAC->Rlmt.Net[NetIdx].
+ Port[pAC->Rlmt.Net[NetIdx].ActivePort]->PortNumber;
+ Para.Para32[1] = NetIdx;
+ SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_DOWN, Para);
+ return;
+ } /* pAC->Rlmt.LinksUp == 0 */
+ else if (pAC->Rlmt.Net[NetIdx].LinksUp == 1 &&
+ pAC->Rlmt.Net[NetIdx].RlmtState == SK_RLMT_RS_NET_DOWN) {
+ /* First link came up - get the net up. */
+ pAC->Rlmt.Net[NetIdx].RlmtState = SK_RLMT_RS_NET_UP;
+
+ /*
+ * If pAC->Rlmt.ActivePort != Para.Para32[0],
+ * the DRV switches to the port that came up.
+ */
+ for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) {
+ if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) {
+ if (!pAC->Rlmt.Net[NetIdx].Port[Active]->LinkDown) {
+ i = Active;
+ }
+ if (!pAC->Rlmt.Net[NetIdx].Port[PrefPort]->LinkDown) {
+ i = PrefPort;
+ }
+ PortFound = SK_TRUE;
+ break;
+ }
+ }
+
+ if (PortFound) {
+ Para.Para32[0] = pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber;
+ Para.Para32[1] = NetIdx;
+ SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_UP, Para);
+
+ pAC->Rlmt.Net[NetIdx].ActivePort = i;
+ Para.Para32[0] = pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber;
+ Para.Para32[1] = NetIdx;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_UP, Para);
+
+ if ((pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_TRANSPARENT) == 0 &&
+ (Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC,
+ pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber,
+ SK_PACKET_ANNOUNCE, &pAC->Addr.Net[NetIdx].
+ CurrentMacAddress, &SkRlmtMcAddr)) != NULL) {
+ /*
+ * Send announce packet to RLMT multicast address to force
+ * switches to learn the new location of the logical MAC address.
+ */
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+ }
+ }
+ else {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E007, SKERR_RLMT_E007_MSG);
+ }
+
+ return;
+ } /* LinksUp == 1 && RlmtState == SK_RLMT_RS_NET_DOWN */
+ else { /* Cannot be reached in dual-net mode. */
+ Para.Para32[0] = Active;
+
+ /*
+ * Preselection:
+ * If RLMT Mode != CheckLinkState
+ * select port that received a broadcast frame substantially later
+ * than all other ports
+ * else select first port that is not SuspectRx
+ * else select first port that is PortUp
+ * else select port that is PortGoingUp for the longest time
+ * else select first port that is PortDown
+ * else stop.
+ *
+ * For the preselected port:
+ * If ActivePort is equal in quality, select ActivePort.
+ *
+ * If PrefPort is equal in quality, select PrefPort.
+ *
+ * If ActivePort != SelectedPort,
+ * If old ActivePort is LinkDown,
+ * SwitchHard
+ * else
+ * SwitchSoft
+ */
+ /* check of ChgBcPrio flag added */
+ if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) &&
+ (!pAC->Rlmt.Net[0].ChgBcPrio)) {
+
+ if (!PortFound) {
+ PortFound = SkRlmtSelectBcRx(
+ pAC, IoC, Active, PrefPort, &Para.Para32[1]);
+ }
+
+ if (!PortFound) {
+ PortFound = SkRlmtSelectNotSuspect(
+ pAC, IoC, Active, PrefPort, &Para.Para32[1]);
+ }
+ } /* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */
+
+ /* with changed priority for last broadcast received */
+ if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) &&
+ (pAC->Rlmt.Net[0].ChgBcPrio)) {
+ if (!PortFound) {
+ PortFound = SkRlmtSelectNotSuspect(
+ pAC, IoC, Active, PrefPort, &Para.Para32[1]);
+ }
+
+ if (!PortFound) {
+ PortFound = SkRlmtSelectBcRx(
+ pAC, IoC, Active, PrefPort, &Para.Para32[1]);
+ }
+ } /* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */
+
+ if (!PortFound) {
+ PortFound = SkRlmtSelectUp(
+ pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS);
+ }
+
+ if (!PortFound) {
+ PortFound = SkRlmtSelectUp(
+ pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED);
+ }
+
+ if (!PortFound) {
+ PortFound = SkRlmtSelectGoingUp(
+ pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS);
+ }
+
+ if (!PortFound) {
+ PortFound = SkRlmtSelectGoingUp(
+ pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED);
+ }
+
+ if (pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) {
+ if (!PortFound) {
+ PortFound = SkRlmtSelectDown(pAC, IoC,
+ Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS);
+ }
+
+ if (!PortFound) {
+ PortFound = SkRlmtSelectDown(pAC, IoC,
+ Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED);
+ }
+ } /* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */
+
+ if (PortFound) {
+
+ if (Para.Para32[1] != Active) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Active: %d, Para1: %d.\n", Active, Para.Para32[1]))
+ pAC->Rlmt.Net[NetIdx].ActivePort = Para.Para32[1];
+ Para.Para32[0] = pAC->Rlmt.Net[NetIdx].
+ Port[Para.Para32[0]]->PortNumber;
+ Para.Para32[1] = pAC->Rlmt.Net[NetIdx].
+ Port[Para.Para32[1]]->PortNumber;
+ SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[1], SK_LED_ACTIVE);
+ if (pAC->Rlmt.Port[Active].LinkDown) {
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_HARD, Para);
+ }
+ else {
+ SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_STANDBY);
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_SOFT, Para);
+ }
+ Para.Para32[1] = NetIdx;
+ Para.Para32[0] =
+ pAC->Rlmt.Net[NetIdx].Port[Para.Para32[0]]->PortNumber;
+ SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_DOWN, Para);
+ Para.Para32[0] = pAC->Rlmt.Net[NetIdx].
+ Port[pAC->Rlmt.Net[NetIdx].ActivePort]->PortNumber;
+ SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_UP, Para);
+ if ((pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_TRANSPARENT) == 0 &&
+ (Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, Para.Para32[0],
+ SK_PACKET_ANNOUNCE, &pAC->Addr.Net[NetIdx].CurrentMacAddress,
+ &SkRlmtMcAddr)) != NULL) {
+ /*
+ * Send announce packet to RLMT multicast address to force
+ * switches to learn the new location of the logical
+ * MAC address.
+ */
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+ } /* (Para.pParaPtr = SkRlmtBuildPacket(...)) != NULL */
+ } /* Para.Para32[1] != Active */
+ } /* PortFound */
+ else {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E004, SKERR_RLMT_E004_MSG);
+ }
+ } /* LinksUp > 1 || LinksUp == 1 && RlmtState != SK_RLMT_RS_NET_DOWN */
+ return;
+} /* SkRlmtCheckSwitch */
+
+
+/******************************************************************************
+ *
+ * SkRlmtCheckSeg - Report if segmentation is detected
+ *
+ * Description:
+ * This routine checks if the ports see different root bridges and reports
+ * segmentation in such a case.
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * Nothing.
+ */
+RLMT_STATIC void SkRlmtCheckSeg(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 NetIdx) /* Net number */
+{
+ SK_EVPARA Para;
+ SK_RLMT_NET *pNet;
+ SK_U32 i, j;
+ SK_BOOL Equal;
+
+ pNet = &pAC->Rlmt.Net[NetIdx];
+ pNet->RootIdSet = SK_FALSE;
+ Equal = SK_TRUE;
+
+ for (i = 0; i < pNet->NumPorts; i++) {
+ if (pNet->Port[i]->LinkDown || !pNet->Port[i]->RootIdSet) {
+ continue;
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_DUMP,
+ ("Root ID %d: %02x %02x %02x %02x %02x %02x %02x %02x.\n", i,
+ pNet->Port[i]->Root.Id[0], pNet->Port[i]->Root.Id[1],
+ pNet->Port[i]->Root.Id[2], pNet->Port[i]->Root.Id[3],
+ pNet->Port[i]->Root.Id[4], pNet->Port[i]->Root.Id[5],
+ pNet->Port[i]->Root.Id[6], pNet->Port[i]->Root.Id[7]))
+
+ if (!pNet->RootIdSet) {
+ pNet->Root = pNet->Port[i]->Root;
+ pNet->RootIdSet = SK_TRUE;
+ continue;
+ }
+
+ for (j = 0; j < 8; j ++) {
+ Equal &= pNet->Port[i]->Root.Id[j] == pNet->Root.Id[j];
+ if (!Equal) {
+ break;
+ }
+ }
+
+ if (!Equal) {
+ SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E005, SKERR_RLMT_E005_MSG);
+ Para.Para32[0] = NetIdx;
+ Para.Para32[1] = (SK_U32)-1;
+ SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SEGMENTATION, Para);
+
+ pNet->CheckingState &= ~SK_RLMT_RCS_REPORT_SEG;
+
+ /* 2000-03-06 RA: New. */
+ Para.Para32[0] = NetIdx;
+ Para.Para32[1] = (SK_U32)-1;
+ SkTimerStart(pAC, IoC, &pNet->SegTimer, SK_RLMT_SEG_TO_VAL,
+ SKGE_RLMT, SK_RLMT_SEG_TIM, Para);
+ break;
+ }
+ } /* for (i = 0; i < pNet->NumPorts; i++) */
+
+ /* 2000-03-06 RA: Moved here. */
+ /* Segmentation check not running anymore. */
+ pNet->CheckingState &= ~SK_RLMT_RCS_SEG;
+
+} /* SkRlmtCheckSeg */
+
+
+/******************************************************************************
+ *
+ * SkRlmtPortStart - initialize port variables and start port
+ *
+ * Description:
+ * This routine initializes a port's variables and issues a PORT_START
+ * to the HWAC module. This handles retries if the start fails or the
+ * link eventually goes down.
+ *
+ * Context:
+ * runtime, pageable?
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtPortStart(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 PortNumber) /* Port number */
+{
+ SK_EVPARA Para;
+
+ pAC->Rlmt.Port[PortNumber].PortState = SK_RLMT_PS_LINK_DOWN;
+ pAC->Rlmt.Port[PortNumber].PortStarted = SK_TRUE;
+ pAC->Rlmt.Port[PortNumber].LinkDown = SK_TRUE;
+ pAC->Rlmt.Port[PortNumber].PortDown = SK_TRUE;
+ pAC->Rlmt.Port[PortNumber].CheckingState = 0;
+ pAC->Rlmt.Port[PortNumber].RootIdSet = SK_FALSE;
+ Para.Para32[0] = PortNumber;
+ Para.Para32[1] = (SK_U32)-1;
+ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
+} /* SkRlmtPortStart */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtPortStartTim - PORT_START_TIM
+ *
+ * Description:
+ * This routine handles PORT_START_TIM events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtPortStartTim(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */
+{
+ SK_U32 i;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORTSTART_TIMEOUT Port %d Event BEGIN.\n", Para.Para32[0]))
+
+ if (Para.Para32[1] != (SK_U32)-1) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad Parameter.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORTSTART_TIMEOUT Event EMPTY.\n"))
+ return;
+ }
+
+ /*
+ * Used to start non-preferred ports if the preferred one
+ * does not come up.
+ * This timeout needs only be set when starting the first
+ * (preferred) port.
+ */
+ if (pAC->Rlmt.Port[Para.Para32[0]].LinkDown) {
+ /* PORT_START failed. */
+ for (i = 0; i < pAC->Rlmt.Port[Para.Para32[0]].Net->NumPorts; i++) {
+ if (!pAC->Rlmt.Port[Para.Para32[0]].Net->Port[i]->PortStarted) {
+ SkRlmtPortStart(pAC, IoC,
+ pAC->Rlmt.Port[Para.Para32[0]].Net->Port[i]->PortNumber);
+ }
+ }
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORTSTART_TIMEOUT Event END.\n"))
+} /* SkRlmtEvtPortStartTim */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtLinkUp - LINK_UP
+ *
+ * Description:
+ * This routine handles LLINK_UP events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtLinkUp(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 Undefined */
+{
+ SK_U32 i;
+ SK_RLMT_PORT *pRPort;
+ SK_EVPARA Para2;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_LINK_UP Port %d Event BEGIN.\n", Para.Para32[0]))
+
+ pRPort = &pAC->Rlmt.Port[Para.Para32[0]];
+ if (!pRPort->PortStarted) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E008, SKERR_RLMT_E008_MSG);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_LINK_UP Event EMPTY.\n"))
+ return;
+ }
+
+ if (!pRPort->LinkDown) {
+ /* RA;:;: Any better solution? */
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_LINK_UP Event EMPTY.\n"))
+ return;
+ }
+
+ SkTimerStop(pAC, IoC, &pRPort->UpTimer);
+ SkTimerStop(pAC, IoC, &pRPort->DownRxTimer);
+ SkTimerStop(pAC, IoC, &pRPort->DownTxTimer);
+
+ /* Do something if timer already fired? */
+
+ pRPort->LinkDown = SK_FALSE;
+ pRPort->PortState = SK_RLMT_PS_GOING_UP;
+ pRPort->GuTimeStamp = SkOsGetTime(pAC);
+ pRPort->BcTimeStamp = 0;
+ pRPort->Net->LinksUp++;
+ if (pRPort->Net->LinksUp == 1) {
+ SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_ACTIVE);
+ }
+ else {
+ SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_STANDBY);
+ }
+
+ for (i = 0; i < pRPort->Net->NumPorts; i++) {
+ if (!pRPort->Net->Port[i]->PortStarted) {
+ SkRlmtPortStart(pAC, IoC, pRPort->Net->Port[i]->PortNumber);
+ }
+ }
+
+ SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
+
+ if (pRPort->Net->LinksUp >= 2) {
+ if (pRPort->Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) {
+ /* Build the check chain. */
+ SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber);
+ }
+ }
+
+ /* If the first link comes up, start the periodical RLMT timeout. */
+ if (pRPort->Net->NumPorts > 1 && pRPort->Net->LinksUp == 1 &&
+ (pRPort->Net->RlmtMode & SK_RLMT_CHECK_OTHERS) != 0) {
+ Para2.Para32[0] = pRPort->Net->NetNumber;
+ Para2.Para32[1] = (SK_U32)-1;
+ SkTimerStart(pAC, IoC, &pRPort->Net->LocTimer,
+ pRPort->Net->TimeoutValue, SKGE_RLMT, SK_RLMT_TIM, Para2);
+ }
+
+ Para2 = Para;
+ Para2.Para32[1] = (SK_U32)-1;
+ SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL,
+ SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para2);
+
+ /* Later: if (pAC->Rlmt.RlmtMode & SK_RLMT_CHECK_LOC_LINK) && */
+ if ((pRPort->Net->RlmtMode & SK_RLMT_TRANSPARENT) == 0 &&
+ (pRPort->Net->RlmtMode & SK_RLMT_CHECK_LINK) != 0 &&
+ (Para2.pParaPtr =
+ SkRlmtBuildPacket(pAC, IoC, Para.Para32[0], SK_PACKET_ANNOUNCE,
+ &pAC->Addr.Port[Para.Para32[0]].CurrentMacAddress, &SkRlmtMcAddr)
+ ) != NULL) {
+ /* Send "new" packet to RLMT multicast address. */
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2);
+ }
+
+ if (pRPort->Net->RlmtMode & SK_RLMT_CHECK_SEG) {
+ if ((Para2.pParaPtr =
+ SkRlmtBuildSpanningTreePacket(pAC, IoC, Para.Para32[0])) != NULL) {
+ pAC->Rlmt.Port[Para.Para32[0]].RootIdSet = SK_FALSE;
+ pRPort->Net->CheckingState |=
+ SK_RLMT_RCS_SEG | SK_RLMT_RCS_REPORT_SEG;
+
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2);
+
+ Para.Para32[1] = (SK_U32)-1;
+ SkTimerStart(pAC, IoC, &pRPort->Net->SegTimer,
+ SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para);
+ }
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_LINK_UP Event END.\n"))
+} /* SkRlmtEvtLinkUp */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtPortUpTim - PORT_UP_TIM
+ *
+ * Description:
+ * This routine handles PORT_UP_TIM events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtPortUpTim(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */
+{
+ SK_RLMT_PORT *pRPort;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORTUP_TIM Port %d Event BEGIN.\n", Para.Para32[0]))
+
+ if (Para.Para32[1] != (SK_U32)-1) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad Parameter.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORTUP_TIM Event EMPTY.\n"))
+ return;
+ }
+
+ pRPort = &pAC->Rlmt.Port[Para.Para32[0]];
+ if (pRPort->LinkDown || (pRPort->PortState == SK_RLMT_PS_UP)) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORTUP_TIM Port %d Event EMPTY.\n", Para.Para32[0]))
+ return;
+ }
+
+ pRPort->PortDown = SK_FALSE;
+ pRPort->PortState = SK_RLMT_PS_UP;
+ pRPort->Net->PortsUp++;
+ if (pRPort->Net->RlmtState != SK_RLMT_RS_INIT) {
+ if (pAC->Rlmt.NumNets <= 1) {
+ SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
+ }
+ SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_PORT_UP, Para);
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORTUP_TIM Event END.\n"))
+} /* SkRlmtEvtPortUpTim */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtPortDownTim - PORT_DOWN_*
+ *
+ * Description:
+ * This routine handles PORT_DOWN_* events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtPortDownX(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 Event, /* Event code */
+SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */
+{
+ SK_RLMT_PORT *pRPort;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORTDOWN* Port %d Event (%d) BEGIN.\n",
+ Para.Para32[0], Event))
+
+ if (Para.Para32[1] != (SK_U32)-1) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad Parameter.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORTDOWN* Event EMPTY.\n"))
+ return;
+ }
+
+ pRPort = &pAC->Rlmt.Port[Para.Para32[0]];
+ if (!pRPort->PortStarted || (Event == SK_RLMT_PORTDOWN_TX_TIM &&
+ !(pRPort->CheckingState & SK_RLMT_PCS_TX))) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORTDOWN* Event (%d) EMPTY.\n", Event))
+ return;
+ }
+
+ /* Stop port's timers. */
+ SkTimerStop(pAC, IoC, &pRPort->UpTimer);
+ SkTimerStop(pAC, IoC, &pRPort->DownRxTimer);
+ SkTimerStop(pAC, IoC, &pRPort->DownTxTimer);
+
+ if (pRPort->PortState != SK_RLMT_PS_LINK_DOWN) {
+ pRPort->PortState = SK_RLMT_PS_DOWN;
+ }
+
+ if (!pRPort->PortDown) {
+ pRPort->Net->PortsUp--;
+ pRPort->PortDown = SK_TRUE;
+ SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_PORT_DOWN, Para);
+ }
+
+ pRPort->PacketsPerTimeSlot = 0;
+ /* pRPort->DataPacketsPerTimeSlot = 0; */
+ pRPort->BpduPacketsPerTimeSlot = 0;
+ pRPort->BcTimeStamp = 0;
+
+ /*
+ * RA;:;: To be checked:
+ * - actions at RLMT_STOP: We should not switch anymore.
+ */
+ if (pRPort->Net->RlmtState != SK_RLMT_RS_INIT) {
+ if (Para.Para32[0] ==
+ pRPort->Net->Port[pRPort->Net->ActivePort]->PortNumber) {
+ /* Active Port went down. */
+ SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
+ }
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORTDOWN* Event (%d) END.\n", Event))
+} /* SkRlmtEvtPortDownX */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtLinkDown - LINK_DOWN
+ *
+ * Description:
+ * This routine handles LINK_DOWN events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtLinkDown(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 Undefined */
+{
+ SK_RLMT_PORT *pRPort;
+
+ pRPort = &pAC->Rlmt.Port[Para.Para32[0]];
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_LINK_DOWN Port %d Event BEGIN.\n", Para.Para32[0]))
+
+ if (!pAC->Rlmt.Port[Para.Para32[0]].LinkDown) {
+ pRPort->Net->LinksUp--;
+ pRPort->LinkDown = SK_TRUE;
+ pRPort->PortState = SK_RLMT_PS_LINK_DOWN;
+ SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_OFF);
+
+ if ((pRPort->Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) != 0) {
+ /* Build the check chain. */
+ SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber);
+ }
+
+ /* Ensure that port is marked down. */
+ Para.Para32[1] = -1;
+ (void)SkRlmtEvent(pAC, IoC, SK_RLMT_PORTDOWN, Para);
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_LINK_DOWN Event END.\n"))
+} /* SkRlmtEvtLinkDown */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtPortAddr - PORT_ADDR
+ *
+ * Description:
+ * This routine handles PORT_ADDR events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtPortAddr(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */
+{
+ SK_U32 i, j;
+ SK_RLMT_PORT *pRPort;
+ SK_MAC_ADDR *pOldMacAddr;
+ SK_MAC_ADDR *pNewMacAddr;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORT_ADDR Port %d Event BEGIN.\n", Para.Para32[0]))
+
+ if (Para.Para32[1] != (SK_U32)-1) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad Parameter.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORT_ADDR Event EMPTY.\n"))
+ return;
+ }
+
+ /* Port's physical MAC address changed. */
+ pOldMacAddr = &pAC->Addr.Port[Para.Para32[0]].PreviousMacAddress;
+ pNewMacAddr = &pAC->Addr.Port[Para.Para32[0]].CurrentMacAddress;
+
+ /*
+ * NOTE: This is not scalable for solutions where ports are
+ * checked remotely. There, we need to send an RLMT
+ * address change packet - and how do we ensure delivery?
+ */
+ for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+ pRPort = &pAC->Rlmt.Port[i];
+ for (j = 0; j < pRPort->PortsChecked; j++) {
+ if (SK_ADDR_EQUAL(
+ pRPort->PortCheck[j].CheckAddr.a, pOldMacAddr->a)) {
+ pRPort->PortCheck[j].CheckAddr = *pNewMacAddr;
+ }
+ }
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PORT_ADDR Event END.\n"))
+} /* SkRlmtEvtPortAddr */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtStart - START
+ *
+ * Description:
+ * This routine handles START events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtStart(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */
+{
+ SK_EVPARA Para2;
+ SK_U32 PortIdx;
+ SK_U32 PortNumber;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_START Net %d Event BEGIN.\n", Para.Para32[0]))
+
+ if (Para.Para32[1] != (SK_U32)-1) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad Parameter.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_START Event EMPTY.\n"))
+ return;
+ }
+
+ if (Para.Para32[0] >= pAC->Rlmt.NumNets) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad NetNumber %d.\n", Para.Para32[0]))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_START Event EMPTY.\n"))
+ return;
+ }
+
+ if (pAC->Rlmt.Net[Para.Para32[0]].RlmtState != SK_RLMT_RS_INIT) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_START Event EMPTY.\n"))
+ return;
+ }
+
+ if (pAC->Rlmt.NetsStarted >= pAC->Rlmt.NumNets) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("All nets should have been started.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_START Event EMPTY.\n"))
+ return;
+ }
+
+ if (pAC->Rlmt.Net[Para.Para32[0]].PrefPort >=
+ pAC->Rlmt.Net[Para.Para32[0]].NumPorts) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E009, SKERR_RLMT_E009_MSG);
+
+ /* Change PrefPort to internal default. */
+ Para2.Para32[0] = 0xFFFFFFFF;
+ Para2.Para32[1] = Para.Para32[0];
+ (void)SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE, Para2);
+ }
+
+ PortIdx = pAC->Rlmt.Net[Para.Para32[0]].PrefPort;
+ PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[PortIdx]->PortNumber;
+
+ pAC->Rlmt.Net[Para.Para32[0]].LinksUp = 0;
+ pAC->Rlmt.Net[Para.Para32[0]].PortsUp = 0;
+ pAC->Rlmt.Net[Para.Para32[0]].CheckingState = 0;
+ pAC->Rlmt.Net[Para.Para32[0]].RlmtState = SK_RLMT_RS_NET_DOWN;
+
+ /* Start preferred port. */
+ SkRlmtPortStart(pAC, IoC, PortNumber);
+
+ /* Start Timer (for first port only). */
+ Para2.Para32[0] = PortNumber;
+ Para2.Para32[1] = (SK_U32)-1;
+ SkTimerStart(pAC, IoC, &pAC->Rlmt.Port[PortNumber].UpTimer,
+ SK_RLMT_PORTSTART_TIM_VAL, SKGE_RLMT, SK_RLMT_PORTSTART_TIM, Para2);
+
+ pAC->Rlmt.NetsStarted++;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_START Event END.\n"))
+} /* SkRlmtEvtStart */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtStop - STOP
+ *
+ * Description:
+ * This routine handles STOP events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtStop(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */
+{
+ SK_EVPARA Para2;
+ SK_U32 PortNumber;
+ SK_U32 i;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STOP Net %d Event BEGIN.\n", Para.Para32[0]))
+
+ if (Para.Para32[1] != (SK_U32)-1) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad Parameter.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STOP Event EMPTY.\n"))
+ return;
+ }
+
+ if (Para.Para32[0] >= pAC->Rlmt.NumNets) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad NetNumber %d.\n", Para.Para32[0]))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STOP Event EMPTY.\n"))
+ return;
+ }
+
+ if (pAC->Rlmt.Net[Para.Para32[0]].RlmtState == SK_RLMT_RS_INIT) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STOP Event EMPTY.\n"))
+ return;
+ }
+
+ if (pAC->Rlmt.NetsStarted == 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("All nets are stopped.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STOP Event EMPTY.\n"))
+ return;
+ }
+
+ /* Stop RLMT timers. */
+ SkTimerStop(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].LocTimer);
+ SkTimerStop(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].SegTimer);
+
+ /* Stop net. */
+ pAC->Rlmt.Net[Para.Para32[0]].RlmtState = SK_RLMT_RS_INIT;
+ pAC->Rlmt.Net[Para.Para32[0]].RootIdSet = SK_FALSE;
+ Para2.Para32[0] = SK_RLMT_NET_DOWN_FINAL;
+ Para2.Para32[1] = Para.Para32[0]; /* Net# */
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_DOWN, Para2);
+
+ /* Stop ports. */
+ for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) {
+ PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber;
+ if (pAC->Rlmt.Port[PortNumber].PortState != SK_RLMT_PS_INIT) {
+ SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].UpTimer);
+ SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].DownRxTimer);
+ SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].DownTxTimer);
+
+ pAC->Rlmt.Port[PortNumber].PortState = SK_RLMT_PS_INIT;
+ pAC->Rlmt.Port[PortNumber].RootIdSet = SK_FALSE;
+ pAC->Rlmt.Port[PortNumber].PortStarted = SK_FALSE;
+ Para2.Para32[0] = PortNumber;
+ Para2.Para32[1] = (SK_U32)-1;
+ SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para2);
+ }
+ }
+
+ pAC->Rlmt.NetsStarted--;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STOP Event END.\n"))
+} /* SkRlmtEvtStop */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtTim - TIM
+ *
+ * Description:
+ * This routine handles TIM events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtTim(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */
+{
+ SK_RLMT_PORT *pRPort;
+ SK_U32 Timeout;
+ SK_U32 NewTimeout;
+ SK_U32 PortNumber;
+ SK_U32 i;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_TIM Event BEGIN.\n"))
+
+ if (Para.Para32[1] != (SK_U32)-1) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad Parameter.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_TIM Event EMPTY.\n"))
+ return;
+ }
+
+ if ((pAC->Rlmt.Net[Para.Para32[0]].RlmtMode & SK_RLMT_CHECK_OTHERS) == 0 ||
+ pAC->Rlmt.Net[Para.Para32[0]].LinksUp == 0) {
+ /* Mode changed or all links down: No more link checking. */
+ return;
+ }
+
+#if 0
+ pAC->Rlmt.SwitchCheckCounter--;
+ if (pAC->Rlmt.SwitchCheckCounter == 0) {
+ pAC->Rlmt.SwitchCheckCounter;
+ }
+#endif /* 0 */
+
+ NewTimeout = SK_RLMT_DEF_TO_VAL;
+ for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) {
+ PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber;
+ pRPort = &pAC->Rlmt.Port[PortNumber];
+ if (!pRPort->LinkDown) {
+ Timeout = SkRlmtCheckPort(pAC, IoC, PortNumber);
+ if (Timeout < NewTimeout) {
+ NewTimeout = Timeout;
+ }
+
+ /*
+ * These counters should be set to 0 for all ports before the
+ * first frame is sent in the next loop.
+ */
+ pRPort->PacketsPerTimeSlot = 0;
+ /* pRPort->DataPacketsPerTimeSlot = 0; */
+ pRPort->BpduPacketsPerTimeSlot = 0;
+ }
+ }
+ pAC->Rlmt.Net[Para.Para32[0]].TimeoutValue = NewTimeout;
+
+ if (pAC->Rlmt.Net[Para.Para32[0]].LinksUp > 1) {
+ /*
+ * If checking remote ports, also send packets if
+ * (LinksUp == 1) &&
+ * this port checks at least one (remote) port.
+ */
+
+ /*
+ * Must be new loop, as SkRlmtCheckPort can request to
+ * check segmentation when e.g. checking the last port.
+ */
+ for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) {
+ if (!pAC->Rlmt.Net[Para.Para32[0]].Port[i]->LinkDown) {
+ SkRlmtSend(pAC, IoC,
+ pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber);
+ }
+ }
+ }
+
+ SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].LocTimer,
+ pAC->Rlmt.Net[Para.Para32[0]].TimeoutValue, SKGE_RLMT, SK_RLMT_TIM,
+ Para);
+
+ if (pAC->Rlmt.Net[Para.Para32[0]].LinksUp > 1 &&
+ (pAC->Rlmt.Net[Para.Para32[0]].RlmtMode & SK_RLMT_CHECK_SEG) &&
+ (pAC->Rlmt.Net[Para.Para32[0]].CheckingState & SK_RLMT_RCS_START_SEG)) {
+ SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].SegTimer,
+ SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para);
+ pAC->Rlmt.Net[Para.Para32[0]].CheckingState &= ~SK_RLMT_RCS_START_SEG;
+ pAC->Rlmt.Net[Para.Para32[0]].CheckingState |=
+ SK_RLMT_RCS_SEG | SK_RLMT_RCS_REPORT_SEG;
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_TIM Event END.\n"))
+} /* SkRlmtEvtTim */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtSegTim - SEG_TIM
+ *
+ * Description:
+ * This routine handles SEG_TIM events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtSegTim(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */
+{
+#ifdef xDEBUG
+ int j;
+#endif /* DEBUG */
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SEG_TIM Event BEGIN.\n"))
+
+ if (Para.Para32[1] != (SK_U32)-1) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad Parameter.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SEG_TIM Event EMPTY.\n"))
+ return;
+ }
+
+#ifdef xDEBUG
+ for (j = 0; j < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; j++) {
+ SK_ADDR_PORT *pAPort;
+ SK_U32 k;
+ SK_U16 *InAddr;
+ SK_U8 InAddr8[6];
+
+ InAddr = (SK_U16 *)&InAddr8[0];
+ pAPort = pAC->Rlmt.Net[Para.Para32[0]].Port[j]->AddrPort;
+ for (k = 0; k < pAPort->NextExactMatchRlmt; k++) {
+ /* Get exact match address k from port j. */
+ XM_INADDR(IoC, pAC->Rlmt.Net[Para.Para32[0]].Port[j]->PortNumber,
+ XM_EXM(k), InAddr);
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("MC address %d on Port %u: %02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x.\n",
+ k, pAC->Rlmt.Net[Para.Para32[0]].Port[j]->PortNumber,
+ InAddr8[0], InAddr8[1], InAddr8[2],
+ InAddr8[3], InAddr8[4], InAddr8[5],
+ pAPort->Exact[k].a[0], pAPort->Exact[k].a[1],
+ pAPort->Exact[k].a[2], pAPort->Exact[k].a[3],
+ pAPort->Exact[k].a[4], pAPort->Exact[k].a[5]))
+ }
+ }
+#endif /* xDEBUG */
+
+ SkRlmtCheckSeg(pAC, IoC, Para.Para32[0]);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SEG_TIM Event END.\n"))
+} /* SkRlmtEvtSegTim */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtPacketRx - PACKET_RECEIVED
+ *
+ * Description:
+ * This routine handles PACKET_RECEIVED events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtPacketRx(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_MBUF *pMb */
+{
+ SK_MBUF *pMb;
+ SK_MBUF *pNextMb;
+ SK_U32 NetNumber;
+
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PACKET_RECEIVED Event BEGIN.\n"))
+
+ /* Should we ignore frames during port switching? */
+
+#ifdef DEBUG
+ pMb = Para.pParaPtr;
+ if (pMb == NULL) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, ("No mbuf.\n"))
+ }
+ else if (pMb->pNext != NULL) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("More than one mbuf or pMb->pNext not set.\n"))
+ }
+#endif /* DEBUG */
+
+ for (pMb = Para.pParaPtr; pMb != NULL; pMb = pNextMb) {
+ pNextMb = pMb->pNext;
+ pMb->pNext = NULL;
+
+ NetNumber = pAC->Rlmt.Port[pMb->PortIdx].Net->NetNumber;
+ if (pAC->Rlmt.Net[NetNumber].RlmtState == SK_RLMT_RS_INIT) {
+ SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+ }
+ else {
+ SkRlmtPacketReceive(pAC, IoC, pMb);
+ }
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PACKET_RECEIVED Event END.\n"))
+} /* SkRlmtEvtPacketRx */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtStatsClear - STATS_CLEAR
+ *
+ * Description:
+ * This routine handles STATS_CLEAR events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtStatsClear(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */
+{
+ SK_U32 i;
+ SK_RLMT_PORT *pRPort;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STATS_CLEAR Event BEGIN.\n"))
+
+ if (Para.Para32[1] != (SK_U32)-1) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad Parameter.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STATS_CLEAR Event EMPTY.\n"))
+ return;
+ }
+
+ if (Para.Para32[0] >= pAC->Rlmt.NumNets) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad NetNumber %d.\n", Para.Para32[0]))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STATS_CLEAR Event EMPTY.\n"))
+ return;
+ }
+
+ /* Clear statistics for logical and physical ports. */
+ for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) {
+ pRPort =
+ &pAC->Rlmt.Port[pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber];
+ pRPort->TxHelloCts = 0;
+ pRPort->RxHelloCts = 0;
+ pRPort->TxSpHelloReqCts = 0;
+ pRPort->RxSpHelloCts = 0;
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STATS_CLEAR Event END.\n"))
+} /* SkRlmtEvtStatsClear */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtStatsUpdate - STATS_UPDATE
+ *
+ * Description:
+ * This routine handles STATS_UPDATE events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtStatsUpdate(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */
+{
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STATS_UPDATE Event BEGIN.\n"))
+
+ if (Para.Para32[1] != (SK_U32)-1) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad Parameter.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STATS_UPDATE Event EMPTY.\n"))
+ return;
+ }
+
+ if (Para.Para32[0] >= pAC->Rlmt.NumNets) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad NetNumber %d.\n", Para.Para32[0]))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STATS_UPDATE Event EMPTY.\n"))
+ return;
+ }
+
+ /* Update statistics - currently always up-to-date. */
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_STATS_UPDATE Event END.\n"))
+} /* SkRlmtEvtStatsUpdate */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtPrefportChange - PREFPORT_CHANGE
+ *
+ * Description:
+ * This routine handles PREFPORT_CHANGE events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtPrefportChange(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 PortIndex; SK_U32 NetNumber */
+{
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PREFPORT_CHANGE to Port %d Event BEGIN.\n", Para.Para32[0]))
+
+ if (Para.Para32[1] >= pAC->Rlmt.NumNets) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad NetNumber %d.\n", Para.Para32[1]))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PREFPORT_CHANGE Event EMPTY.\n"))
+ return;
+ }
+
+ /* 0xFFFFFFFF == auto-mode. */
+ if (Para.Para32[0] == 0xFFFFFFFF) {
+ pAC->Rlmt.Net[Para.Para32[1]].PrefPort = SK_RLMT_DEF_PREF_PORT;
+ }
+ else {
+ if (Para.Para32[0] >= pAC->Rlmt.Net[Para.Para32[1]].NumPorts) {
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E010, SKERR_RLMT_E010_MSG);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PREFPORT_CHANGE Event EMPTY.\n"))
+ return;
+ }
+
+ pAC->Rlmt.Net[Para.Para32[1]].PrefPort = Para.Para32[0];
+ }
+
+ pAC->Rlmt.Net[Para.Para32[1]].Preference = Para.Para32[0];
+
+ if (pAC->Rlmt.Net[Para.Para32[1]].RlmtState != SK_RLMT_RS_INIT) {
+ SkRlmtCheckSwitch(pAC, IoC, Para.Para32[1]);
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_PREFPORT_CHANGE Event END.\n"))
+} /* SkRlmtEvtPrefportChange */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtSetNets - SET_NETS
+ *
+ * Description:
+ * This routine handles SET_NETS events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtSetNets(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 NumNets; SK_U32 -1 */
+{
+ int i;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SET_NETS Event BEGIN.\n"))
+
+ if (Para.Para32[1] != (SK_U32)-1) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad Parameter.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SET_NETS Event EMPTY.\n"))
+ return;
+ }
+
+ if (Para.Para32[0] == 0 || Para.Para32[0] > SK_MAX_NETS ||
+ Para.Para32[0] > (SK_U32)pAC->GIni.GIMacsFound) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad number of nets: %d.\n", Para.Para32[0]))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SET_NETS Event EMPTY.\n"))
+ return;
+ }
+
+ if (Para.Para32[0] == pAC->Rlmt.NumNets) { /* No change. */
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SET_NETS Event EMPTY.\n"))
+ return;
+ }
+
+ /* Entering and leaving dual mode only allowed while nets are stopped. */
+ if (pAC->Rlmt.NetsStarted > 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Changing dual mode only allowed while all nets are stopped.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SET_NETS Event EMPTY.\n"))
+ return;
+ }
+
+ if (Para.Para32[0] == 1) {
+ if (pAC->Rlmt.NumNets > 1) {
+ /* Clear logical MAC addr from second net's active port. */
+ (void)SkAddrOverride(pAC, IoC, pAC->Rlmt.Net[1].Port[pAC->Addr.
+ Net[1].ActivePort]->PortNumber, NULL, SK_ADDR_CLEAR_LOGICAL);
+ pAC->Rlmt.Net[1].NumPorts = 0;
+ }
+
+ pAC->Rlmt.NumNets = Para.Para32[0];
+ for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) {
+ pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT;
+ pAC->Rlmt.Net[i].RootIdSet = SK_FALSE;
+ pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF; /* "Automatic" */
+ pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT;
+ /* Just assuming. */
+ pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort;
+ pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE;
+ pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL;
+ pAC->Rlmt.Net[i].NetNumber = i;
+ }
+
+ pAC->Rlmt.Port[1].Net= &pAC->Rlmt.Net[0];
+ pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound;
+
+ SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SET_NETS, Para);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("RLMT: Changed to one net with two ports.\n"))
+ }
+ else if (Para.Para32[0] == 2) {
+ pAC->Rlmt.Port[1].Net= &pAC->Rlmt.Net[1];
+ pAC->Rlmt.Net[1].NumPorts = pAC->GIni.GIMacsFound - 1;
+ pAC->Rlmt.Net[0].NumPorts =
+ pAC->GIni.GIMacsFound - pAC->Rlmt.Net[1].NumPorts;
+
+ pAC->Rlmt.NumNets = Para.Para32[0];
+ for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) {
+ pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT;
+ pAC->Rlmt.Net[i].RootIdSet = SK_FALSE;
+ pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF; /* "Automatic" */
+ pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT;
+ /* Just assuming. */
+ pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort;
+ pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE;
+ pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL;
+
+ pAC->Rlmt.Net[i].NetNumber = i;
+ }
+
+ /* Set logical MAC addr on second net's active port. */
+ (void)SkAddrOverride(pAC, IoC, pAC->Rlmt.Net[1].Port[pAC->Addr.
+ Net[1].ActivePort]->PortNumber, NULL, SK_ADDR_SET_LOGICAL);
+
+ SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SET_NETS, Para);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("RLMT: Changed to two nets with one port each.\n"))
+ }
+ else {
+ /* Not implemented for more than two nets. */
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SetNets not implemented for more than two nets.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SET_NETS Event EMPTY.\n"))
+ return;
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_SET_NETS Event END.\n"))
+} /* SkRlmtSetNets */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvtModeChange - MODE_CHANGE
+ *
+ * Description:
+ * This routine handles MODE_CHANGE events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * Nothing
+ */
+RLMT_STATIC void SkRlmtEvtModeChange(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_EVPARA Para) /* SK_U32 NewMode; SK_U32 NetNumber */
+{
+ SK_EVPARA Para2;
+ SK_U32 i;
+ SK_U32 PrevRlmtMode;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_MODE_CHANGE Event BEGIN.\n"))
+
+ if (Para.Para32[1] >= pAC->Rlmt.NumNets) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Bad NetNumber %d.\n", Para.Para32[1]))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_MODE_CHANGE Event EMPTY.\n"))
+ return;
+ }
+
+ Para.Para32[0] |= SK_RLMT_CHECK_LINK;
+
+ if ((pAC->Rlmt.Net[Para.Para32[1]].NumPorts == 1) &&
+ Para.Para32[0] != SK_RLMT_MODE_CLS) {
+ pAC->Rlmt.Net[Para.Para32[1]].RlmtMode = SK_RLMT_MODE_CLS;
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Forced RLMT mode to CLS on single port net.\n"))
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_MODE_CHANGE Event EMPTY.\n"))
+ return;
+ }
+
+ /* Update RLMT mode. */
+ PrevRlmtMode = pAC->Rlmt.Net[Para.Para32[1]].RlmtMode;
+ pAC->Rlmt.Net[Para.Para32[1]].RlmtMode = Para.Para32[0];
+
+ if ((PrevRlmtMode & SK_RLMT_CHECK_LOC_LINK) !=
+ (pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) {
+ /* SK_RLMT_CHECK_LOC_LINK bit changed. */
+ if ((PrevRlmtMode & SK_RLMT_CHECK_OTHERS) == 0 &&
+ pAC->Rlmt.Net[Para.Para32[1]].NumPorts > 1 &&
+ pAC->Rlmt.Net[Para.Para32[1]].PortsUp >= 1) {
+ /* 20001207 RA: Was "PortsUp == 1". */
+ Para2.Para32[0] = Para.Para32[1];
+ Para2.Para32[1] = (SK_U32)-1;
+ SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[1]].LocTimer,
+ pAC->Rlmt.Net[Para.Para32[1]].TimeoutValue,
+ SKGE_RLMT, SK_RLMT_TIM, Para2);
+ }
+ }
+
+ if ((PrevRlmtMode & SK_RLMT_CHECK_SEG) !=
+ (pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_SEG)) {
+ /* SK_RLMT_CHECK_SEG bit changed. */
+ for (i = 0; i < pAC->Rlmt.Net[Para.Para32[1]].NumPorts; i++) {
+ (void)SkAddrMcClear(pAC, IoC,
+ pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber,
+ SK_ADDR_PERMANENT | SK_MC_SW_ONLY);
+
+ /* Add RLMT MC address. */
+ (void)SkAddrMcAdd(pAC, IoC,
+ pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber,
+ &SkRlmtMcAddr, SK_ADDR_PERMANENT);
+
+ if ((pAC->Rlmt.Net[Para.Para32[1]].RlmtMode &
+ SK_RLMT_CHECK_SEG) != 0) {
+ /* Add BPDU MC address. */
+ (void)SkAddrMcAdd(pAC, IoC,
+ pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber,
+ &BridgeMcAddr, SK_ADDR_PERMANENT);
+
+ if (pAC->Rlmt.Net[Para.Para32[1]].RlmtState != SK_RLMT_RS_INIT) {
+ if (!pAC->Rlmt.Net[Para.Para32[1]].Port[i]->LinkDown &&
+ (Para2.pParaPtr = SkRlmtBuildSpanningTreePacket(
+ pAC, IoC, i)) != NULL) {
+ pAC->Rlmt.Net[Para.Para32[1]].Port[i]->RootIdSet =
+ SK_FALSE;
+ SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2);
+ }
+ }
+ }
+ (void)SkAddrMcUpdate(pAC, IoC,
+ pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber);
+ } /* for ... */
+
+ if ((pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_SEG) != 0) {
+ Para2.Para32[0] = Para.Para32[1];
+ Para2.Para32[1] = (SK_U32)-1;
+ SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[1]].SegTimer,
+ SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para2);
+ }
+ } /* SK_RLMT_CHECK_SEG bit changed. */
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("SK_RLMT_MODE_CHANGE Event END.\n"))
+} /* SkRlmtEvtModeChange */
+
+
+/******************************************************************************
+ *
+ * SkRlmtEvent - a PORT- or an RLMT-specific event happened
+ *
+ * Description:
+ * This routine calls subroutines to handle PORT- and RLMT-specific events.
+ *
+ * Context:
+ * runtime, pageable?
+ * may be called after SK_INIT_IO
+ *
+ * Returns:
+ * 0
+ */
+int SkRlmtEvent(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+SK_U32 Event, /* Event code */
+SK_EVPARA Para) /* Event-specific parameter */
+{
+ switch (Event) {
+
+ /* ----- PORT events ----- */
+
+ case SK_RLMT_PORTSTART_TIM: /* From RLMT via TIME. */
+ SkRlmtEvtPortStartTim(pAC, IoC, Para);
+ break;
+ case SK_RLMT_LINK_UP: /* From SIRQ. */
+ SkRlmtEvtLinkUp(pAC, IoC, Para);
+ break;
+ case SK_RLMT_PORTUP_TIM: /* From RLMT via TIME. */
+ SkRlmtEvtPortUpTim(pAC, IoC, Para);
+ break;
+ case SK_RLMT_PORTDOWN: /* From RLMT. */
+ case SK_RLMT_PORTDOWN_RX_TIM: /* From RLMT via TIME. */
+ case SK_RLMT_PORTDOWN_TX_TIM: /* From RLMT via TIME. */
+ SkRlmtEvtPortDownX(pAC, IoC, Event, Para);
+ break;
+ case SK_RLMT_LINK_DOWN: /* From SIRQ. */
+ SkRlmtEvtLinkDown(pAC, IoC, Para);
+ break;
+ case SK_RLMT_PORT_ADDR: /* From ADDR. */
+ SkRlmtEvtPortAddr(pAC, IoC, Para);
+ break;
+
+ /* ----- RLMT events ----- */
+
+ case SK_RLMT_START: /* From DRV. */
+ SkRlmtEvtStart(pAC, IoC, Para);
+ break;
+ case SK_RLMT_STOP: /* From DRV. */
+ SkRlmtEvtStop(pAC, IoC, Para);
+ break;
+ case SK_RLMT_TIM: /* From RLMT via TIME. */
+ SkRlmtEvtTim(pAC, IoC, Para);
+ break;
+ case SK_RLMT_SEG_TIM:
+ SkRlmtEvtSegTim(pAC, IoC, Para);
+ break;
+ case SK_RLMT_PACKET_RECEIVED: /* From DRV. */
+ SkRlmtEvtPacketRx(pAC, IoC, Para);
+ break;
+ case SK_RLMT_STATS_CLEAR: /* From PNMI. */
+ SkRlmtEvtStatsClear(pAC, IoC, Para);
+ break;
+ case SK_RLMT_STATS_UPDATE: /* From PNMI. */
+ SkRlmtEvtStatsUpdate(pAC, IoC, Para);
+ break;
+ case SK_RLMT_PREFPORT_CHANGE: /* From PNMI. */
+ SkRlmtEvtPrefportChange(pAC, IoC, Para);
+ break;
+ case SK_RLMT_MODE_CHANGE: /* From PNMI. */
+ SkRlmtEvtModeChange(pAC, IoC, Para);
+ break;
+ case SK_RLMT_SET_NETS: /* From DRV. */
+ SkRlmtEvtSetNets(pAC, IoC, Para);
+ break;
+
+ /* ----- Unknown events ----- */
+
+ default: /* Create error log entry. */
+ SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+ ("Unknown RLMT Event %d.\n", Event))
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E003, SKERR_RLMT_E003_MSG);
+ break;
+ } /* switch() */
+
+ return (0);
+} /* SkRlmtEvent */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/sk98lin/sktimer.c b/drivers/net/sk98lin/sktimer.c
new file mode 100644
index 0000000..37cd4c9
--- /dev/null
+++ b/drivers/net/sk98lin/sktimer.c
@@ -0,0 +1,297 @@
+/******************************************************************************
+ *
+ * Name: sktimer.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.12 $
+ * Date: $Date: 1999/11/22 13:38:51 $
+ * Purpose: High level timer functions.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: sktimer.c,v $
+ * Revision 1.12 1999/11/22 13:38:51 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.11 1998/12/17 13:24:13 gklug
+ * fix: restart problem: do NOT destroy timer queue if init 1 is done
+ *
+ * Revision 1.10 1998/10/15 15:11:36 gklug
+ * fix: ID_sccs to SysKonnectFileId
+ *
+ * Revision 1.9 1998/09/15 15:15:04 cgoos
+ * Changed TRUE/FALSE to SK_TRUE/SK_FALSE
+ *
+ * Revision 1.8 1998/09/08 08:47:55 gklug
+ * add: init level handling
+ *
+ * Revision 1.7 1998/08/19 09:50:53 gklug
+ * fix: remove struct keyword from c-code (see CCC) add typedefs
+ *
+ * Revision 1.6 1998/08/17 13:43:13 gklug
+ * chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR
+ *
+ * Revision 1.5 1998/08/14 07:09:14 gklug
+ * fix: chg pAc -> pAC
+ *
+ * Revision 1.4 1998/08/07 12:53:46 gklug
+ * fix: first compiled version
+ *
+ * Revision 1.3 1998/08/07 09:31:53 gklug
+ * fix: delta spelling
+ *
+ * Revision 1.2 1998/08/07 09:31:02 gklug
+ * adapt functions to new c coding conventions
+ * rmv: "fast" handling
+ * chg: inserting of new timer in queue.
+ * chg: event queue generation when timer runs out
+ *
+ * Revision 1.1 1998/08/05 11:27:55 gklug
+ * first version: adapted from SMT
+ *
+ *
+ *
+ *
+ ******************************************************************************/
+
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+/*
+ Event queue and dispatcher
+*/
+static const char SysKonnectFileId[] =
+ "$Header: /usr56/projects/ge/schedule/sktimer.c,v 1.12 1999/11/22 13:38:51 cgoos Exp $" ;
+
+#include "h/skdrv1st.h" /* Driver Specific Definitions */
+#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */
+
+#ifdef __C2MAN__
+/*
+ Event queue management.
+
+ General Description:
+
+ */
+intro()
+{}
+#endif
+
+
+/* Forward declaration */
+static void timer_done(SK_AC *pAC,SK_IOC Ioc,int Restart);
+
+
+/*
+ * Inits the software timer
+ *
+ * needs to be called during Init level 1.
+ */
+void SkTimerInit(
+SK_AC *pAC, /* Adapters context */
+SK_IOC Ioc, /* IoContext */
+int Level) /* Init Level */
+{
+ switch (Level) {
+ case SK_INIT_DATA:
+ pAC->Tim.StQueue = 0 ;
+ break;
+ case SK_INIT_IO:
+ SkHwtInit(pAC,Ioc) ;
+ SkTimerDone(pAC, Ioc);
+ break;
+ default:
+ break;
+ }
+}
+
+/*
+ * Stops a high level timer
+ * - If a timer is not in the queue the function returns normally, too.
+ */
+void SkTimerStop(
+SK_AC *pAC, /* Adapters context */
+SK_IOC Ioc, /* IoContext */
+SK_TIMER *pTimer) /* Timer Pointer to be started */
+{
+ SK_TIMER **ppTimPrev ;
+ SK_TIMER *pTm ;
+
+ /*
+ * remove timer from queue
+ */
+ pTimer->TmActive = SK_FALSE ;
+ if (pAC->Tim.StQueue == pTimer && !pTimer->TmNext) {
+ SkHwtStop(pAC,Ioc) ;
+ }
+ for (ppTimPrev = &pAC->Tim.StQueue ; (pTm = *ppTimPrev) ;
+ ppTimPrev = &pTm->TmNext ) {
+ if (pTm == pTimer) {
+ /*
+ * Timer found in queue
+ * - dequeue it and
+ * - correct delta of the next timer
+ */
+ *ppTimPrev = pTm->TmNext ;
+
+ if (pTm->TmNext) {
+ /* correct delta of next timer in queue */
+ pTm->TmNext->TmDelta += pTm->TmDelta ;
+ }
+ return ;
+ }
+ }
+}
+
+/*
+ * Start a high level software timer
+ */
+void SkTimerStart(
+SK_AC *pAC, /* Adapters context */
+SK_IOC Ioc, /* IoContext */
+SK_TIMER *pTimer, /* Timer Pointer to be started */
+SK_U32 Time, /* Time value */
+SK_U32 Class, /* Event Class for this timer */
+SK_U32 Event, /* Event Value for this timer */
+SK_EVPARA Para) /* Event Parameter for this timer */
+{
+ SK_TIMER **ppTimPrev ;
+ SK_TIMER *pTm ;
+ SK_U32 Delta ;
+
+ Time /= 16 ; /* input is uS, clock ticks are 16uS */
+ if (!Time)
+ Time = 1 ;
+
+ SkTimerStop(pAC,Ioc,pTimer) ;
+
+ pTimer->TmClass = Class ;
+ pTimer->TmEvent = Event ;
+ pTimer->TmPara = Para ;
+ pTimer->TmActive = SK_TRUE ;
+
+ if (!pAC->Tim.StQueue) {
+ /* First Timer to be started */
+ pAC->Tim.StQueue = pTimer ;
+ pTimer->TmNext = 0 ;
+ pTimer->TmDelta = Time ;
+ SkHwtStart(pAC,Ioc,Time) ;
+ return ;
+ }
+
+ /*
+ * timer correction
+ */
+ timer_done(pAC,Ioc,0) ;
+
+ /*
+ * find position in queue
+ */
+ Delta = 0 ;
+ for (ppTimPrev = &pAC->Tim.StQueue ; (pTm = *ppTimPrev) ;
+ ppTimPrev = &pTm->TmNext ) {
+ if (Delta + pTm->TmDelta > Time) {
+ /* Position found */
+ /* Here the timer needs to be inserted. */
+ break ;
+ }
+ Delta += pTm->TmDelta ;
+ }
+
+ /* insert in queue */
+ *ppTimPrev = pTimer ;
+ pTimer->TmNext = pTm ;
+ pTimer->TmDelta = Time - Delta ;
+
+ if (pTm) {
+ /* There is a next timer
+ * -> correct its Delta value.
+ */
+ pTm->TmDelta -= pTimer->TmDelta ;
+ }
+
+ /*
+ * start new with first
+ */
+ SkHwtStart(pAC,Ioc,pAC->Tim.StQueue->TmDelta) ;
+}
+
+
+void SkTimerDone(
+SK_AC *pAC, /* Adapters context */
+SK_IOC Ioc) /* IoContext */
+{
+ timer_done(pAC,Ioc,1) ;
+}
+
+
+static void timer_done(
+SK_AC *pAC, /* Adapters context */
+SK_IOC Ioc, /* IoContext */
+int Restart) /* Do we need to restart the Hardware timer ? */
+{
+ SK_U32 Delta ;
+ SK_TIMER *pTm ;
+ SK_TIMER *pTComp ; /* Timer completed now now */
+ SK_TIMER **ppLast ; /* Next field of Last timer to be deq */
+ int Done = 0 ;
+
+ Delta = SkHwtRead(pAC,Ioc) ;
+ ppLast = &pAC->Tim.StQueue ;
+ pTm = pAC->Tim.StQueue ;
+ while (pTm && !Done) {
+ if (Delta >= pTm->TmDelta) {
+ /* Timer ran out */
+ pTm->TmActive = SK_FALSE ;
+ Delta -= pTm->TmDelta ;
+ ppLast = &pTm->TmNext ;
+ pTm = pTm->TmNext ;
+ } else {
+ /* We found the first timer that did not run out */
+ pTm->TmDelta -= Delta ;
+ Delta = 0 ;
+ Done = 1 ;
+ }
+ }
+ *ppLast = 0 ;
+ /*
+ * pTm points to the first Timer that did not run out.
+ * StQueue points to the first Timer that run out.
+ */
+
+ for ( pTComp = pAC->Tim.StQueue ; pTComp ; pTComp = pTComp->TmNext) {
+ SkEventQueue(pAC,pTComp->TmClass, pTComp->TmEvent,
+ pTComp->TmPara) ;
+ }
+
+ /* Set head of timer queue to the first timer that did not run out */
+ pAC->Tim.StQueue = pTm ;
+
+ if (Restart && pAC->Tim.StQueue) {
+ /* Restart HW timer */
+ SkHwtStart(pAC,Ioc,pAC->Tim.StQueue->TmDelta) ;
+ }
+}
+
+#endif /* CONFIG_SK98 */
+
+/* End of file */
diff --git a/drivers/net/sk98lin/skvpd.c b/drivers/net/sk98lin/skvpd.c
new file mode 100644
index 0000000..3b81e67
--- /dev/null
+++ b/drivers/net/sk98lin/skvpd.c
@@ -0,0 +1,1329 @@
+/******************************************************************************
+ *
+ * Name: skvpd.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.37 $
+ * Date: $Date: 2003/01/13 10:42:45 $
+ * Purpose: Shared software to read and write VPD data
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skvpd.c,v $
+ * Revision 1.37 2003/01/13 10:42:45 rschmidt
+ * Replaced check for PCI device Id from YUKON with GENESIS
+ * to set the VPD size in VpdInit()
+ * Editorial changes
+ *
+ * Revision 1.36 2002/11/14 15:16:56 gheinig
+ * Added const specifier to key and buf parameters for VpdPara, VpdRead
+ * and VpdWrite for Diag 7 GUI
+ *
+ * Revision 1.35 2002/10/21 14:31:59 gheinig
+ * Took out CVS web garbage at head of file
+ *
+ * Revision 1.34 2002/10/21 11:47:24 gheinig
+ * Reverted to version 1.32 due to unwanted commit
+ *
+ * Revision 1.32 2002/10/14 16:04:29 rschmidt
+ * Added saving of VPD ROM Size from PCI_OUR_REG_2
+ * Avoid reading of PCI_OUR_REG_2 in VpdTransferBlock()
+ * Editorial changes
+ *
+ * Revision 1.31 2002/09/10 09:21:32 mkarl
+ * Replaced all if(GIChipId == CHIP_ID_GENESIS) with new entry GIGenesis
+ *
+ * Revision 1.30 2002/09/09 14:43:03 mkarl
+ * changes for diagnostics in order to read VPD data before the adapter
+ * has been initialized
+ * editorial changes
+ *
+ * Revision 1.29 2002/07/26 13:20:43 mkarl
+ * added Yukon support
+ * save size of VPD in pAC->vpd.vpd_size
+ *
+ * Revision 1.28 2002/04/02 15:31:47 afischer
+ * Bug fix in VpdWait()
+ *
+ * Revision 1.27 2000/08/10 11:29:06 rassmann
+ * Editorial changes.
+ * Preserving 32-bit alignment in structs for the adapter context.
+ * Removed unused function VpdWriteDword() (#if 0).
+ * Made VpdReadKeyword() available for SKDIAG only.
+ *
+ * Revision 1.26 2000/06/13 08:00:01 mkarl
+ * additional cast to avoid compile problems in 64 bit environment
+ *
+ * Revision 1.25 1999/11/22 13:39:32 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.24 1999/03/11 14:25:49 malthoff
+ * Replace __STDC__ with SK_KR_PROTO.
+ *
+ * Revision 1.23 1999/01/11 15:13:11 gklug
+ * fix: syntax error
+ *
+ * Revision 1.22 1998/10/30 06:41:15 gklug
+ * rmv: WARNING
+ *
+ * Revision 1.21 1998/10/29 07:15:14 gklug
+ * fix: Write Stream function needs verify.
+ *
+ * Revision 1.20 1998/10/28 18:05:08 gklug
+ * chg: no DEBUG in VpdMayWrite
+ *
+ * Revision 1.19 1998/10/28 15:56:11 gklug
+ * fix: Return len at end of ReadStream
+ * fix: Write even less than 4 bytes correctly
+ *
+ * Revision 1.18 1998/10/28 09:00:47 gklug
+ * fix: unreferenced local vars
+ *
+ * Revision 1.17 1998/10/28 08:25:45 gklug
+ * fix: WARNING
+ *
+ * Revision 1.16 1998/10/28 08:17:30 gklug
+ * fix: typo
+ *
+ * Revision 1.15 1998/10/28 07:50:32 gklug
+ * fix: typo
+ *
+ * Revision 1.14 1998/10/28 07:20:38 gklug
+ * chg: Interface functions to use IoC as parameter as well
+ * fix: VpdRead/WriteDWord now returns SK_U32
+ * chg: VPD_IN/OUT names conform to SK_IN/OUT
+ * add: usage of VPD_IN/OUT8 macros
+ * add: VpdRead/Write Stream functions to r/w a stream of data
+ * fix: VpdTransferBlock swapped illegal
+ * add: VpdMayWrite
+ *
+ * Revision 1.13 1998/10/22 10:02:37 gklug
+ * fix: SysKonnectFileId typo
+ *
+ * Revision 1.12 1998/10/20 10:01:01 gklug
+ * fix: parameter to SkOsGetTime
+ *
+ * Revision 1.11 1998/10/15 12:51:48 malthoff
+ * Remove unrequired parameter p in vpd_setup_para().
+ *
+ * Revision 1.10 1998/10/08 14:52:43 malthoff
+ * Remove CvsId by SysKonnectFileId.
+ *
+ * Revision 1.9 1998/09/16 07:33:52 malthoff
+ * replace memcmp() by SK_MEMCMP and
+ * memcpy() by SK_MEMCPY() to be
+ * independent from the 'C' Standard Library.
+ *
+ * Revision 1.8 1998/08/19 12:52:35 malthoff
+ * compiler fix: use SK_VPD_KEY instead of S_VPD.
+ *
+ * Revision 1.7 1998/08/19 08:14:01 gklug
+ * fix: remove struct keyword as much as possible from the C-code (see CCC)
+ *
+ * Revision 1.6 1998/08/18 13:03:58 gklug
+ * SkOsGetTime now returns SK_U64
+ *
+ * Revision 1.5 1998/08/18 08:17:29 malthoff
+ * Ensure we issue a VPD read in vpd_read_dword().
+ * Discard all VPD keywords other than Vx or Yx, where
+ * x is '0..9' or 'A..Z'.
+ *
+ * Revision 1.4 1998/07/03 14:52:19 malthoff
+ * Add category SK_DBGCAT_FATAL to some debug macros.
+ * bug fix: correct the keyword name check in vpd_write().
+ *
+ * Revision 1.3 1998/06/26 11:16:53 malthoff
+ * Correct the modified File Identifier.
+ *
+ * Revision 1.2 1998/06/26 11:13:43 malthoff
+ * Modify the File Identifier.
+ *
+ * Revision 1.1 1998/06/19 14:11:08 malthoff
+ * Created, Tests with AIX were performed successfully
+ *
+ *
+ ******************************************************************************/
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+/*
+ Please refer skvpd.txt for infomation how to include this module
+ */
+static const char SysKonnectFileId[] =
+ "@(#)$Id: skvpd.c,v 1.37 2003/01/13 10:42:45 rschmidt Exp $ (C) SK";
+
+#include "h/skdrv1st.h"
+#include "h/sktypes.h"
+#include "h/skdebug.h"
+#include "h/skdrv2nd.h"
+
+/*
+ * Static functions
+ */
+#ifndef SK_KR_PROTO
+static SK_VPD_PARA *vpd_find_para(
+ SK_AC *pAC,
+ const char *key,
+ SK_VPD_PARA *p);
+#else /* SK_KR_PROTO */
+static SK_VPD_PARA *vpd_find_para();
+#endif /* SK_KR_PROTO */
+
+/*
+ * waits for a completion of a VPD transfer
+ * The VPD transfer must complete within SK_TICKS_PER_SEC/16
+ *
+ * returns 0: success, transfer completes
+ * error exit(9) with a error message
+ */
+static int VpdWait(
+SK_AC *pAC, /* Adapters context */
+SK_IOC IoC, /* IO Context */
+int event) /* event to wait for (VPD_READ / VPD_write) completion*/
+{
+ SK_U64 start_time;
+ SK_U16 state;
+
+ SK_DBG_MSG(pAC,SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("VPD wait for %s\n", event?"Write":"Read"));
+ start_time = SkOsGetTime(pAC);
+ do {
+ if (SkOsGetTime(pAC) - start_time > SK_TICKS_PER_SEC) {
+
+ /* Bug fix AF: Thu Mar 28 2002
+ * Do not call: VPD_STOP(pAC, IoC);
+ * A pending VPD read cycle can not be aborted by writing
+ * VPD_WRITE to the PCI_VPD_ADR_REG (VPD address register).
+ * Although the write threshold in the OUR-register protects
+ * VPD read only space from being overwritten this does not
+ * protect a VPD read from being `converted` into a VPD write
+ * operation (on the fly). As a consequence the VPD_STOP would
+ * delete VPD read only data. In case of any problems with the
+ * I2C bus we exit the loop here. The I2C read operation can
+ * not be aborted except by a reset (->LR).
+ */
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_FATAL | SK_DBGCAT_ERR,
+ ("ERROR:VPD wait timeout\n"));
+ return(1);
+ }
+
+ VPD_IN16(pAC, IoC, PCI_VPD_ADR_REG, &state);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("state = %x, event %x\n",state,event));
+ } while((int)(state & PCI_VPD_FLAG) == event);
+
+ return(0);
+}
+
+#ifdef SKDIAG
+
+/*
+ * Read the dword at address 'addr' from the VPD EEPROM.
+ *
+ * Needed Time: MIN 1,3 ms MAX 2,6 ms
+ *
+ * Note: The DWord is returned in the endianess of the machine the routine
+ * is running on.
+ *
+ * Returns the data read.
+ */
+SK_U32 VpdReadDWord(
+SK_AC *pAC, /* Adapters context */
+SK_IOC IoC, /* IO Context */
+int addr) /* VPD address */
+{
+ SK_U32 Rtv;
+
+ /* start VPD read */
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("VPD read dword at 0x%x\n",addr));
+ addr &= ~VPD_WRITE; /* ensure the R/W bit is set to read */
+
+ VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, (SK_U16)addr);
+
+ /* ignore return code here */
+ (void)VpdWait(pAC, IoC, VPD_READ);
+
+ /* Don't swap here, it's a data stream of bytes */
+ Rtv = 0;
+
+ VPD_IN32(pAC, IoC, PCI_VPD_DAT_REG, &Rtv);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("VPD read dword data = 0x%x\n",Rtv));
+ return(Rtv);
+}
+
+#endif /* SKDIAG */
+
+#if 0
+
+/*
+ Write the dword 'data' at address 'addr' into the VPD EEPROM, and
+ verify that the data is written.
+
+ Needed Time:
+
+. MIN MAX
+. -------------------------------------------------------------------
+. write 1.8 ms 3.6 ms
+. internal write cyles 0.7 ms 7.0 ms
+. -------------------------------------------------------------------
+. over all program time 2.5 ms 10.6 ms
+. read 1.3 ms 2.6 ms
+. -------------------------------------------------------------------
+. over all 3.8 ms 13.2 ms
+.
+
+
+ Returns 0: success
+ 1: error, I2C transfer does not terminate
+ 2: error, data verify error
+
+ */
+static int VpdWriteDWord(
+SK_AC *pAC, /* pAC pointer */
+SK_IOC IoC, /* IO Context */
+int addr, /* VPD address */
+SK_U32 data) /* VPD data to write */
+{
+ /* start VPD write */
+ /* Don't swap here, it's a data stream of bytes */
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("VPD write dword at addr 0x%x, data = 0x%x\n",addr,data));
+ VPD_OUT32(pAC, IoC, PCI_VPD_DAT_REG, (SK_U32)data);
+ /* But do it here */
+ addr |= VPD_WRITE;
+
+ VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, (SK_U16)(addr | VPD_WRITE));
+
+ /* this may take up to 10,6 ms */
+ if (VpdWait(pAC, IoC, VPD_WRITE)) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("Write Timed Out\n"));
+ return(1);
+ };
+
+ /* verify data */
+ if (VpdReadDWord(pAC, IoC, addr) != data) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+ ("Data Verify Error\n"));
+ return(2);
+ }
+ return(0);
+} /* VpdWriteDWord */
+
+#endif /* 0 */
+
+/*
+ * Read one Stream of 'len' bytes of VPD data, starting at 'addr' from
+ * or to the I2C EEPROM.
+ *
+ * Returns number of bytes read / written.
+ */
+static int VpdWriteStream(
+SK_AC *pAC, /* Adapters context */
+SK_IOC IoC, /* IO Context */
+char *buf, /* data buffer */
+int Addr, /* VPD start address */
+int Len) /* number of bytes to read / to write */
+{
+ int i;
+ int j;
+ SK_U16 AdrReg;
+ int Rtv;
+ SK_U8 * pComp; /* Compare pointer */
+ SK_U8 Data; /* Input Data for Compare */
+
+ /* Init Compare Pointer */
+ pComp = (SK_U8 *) buf;
+
+ for (i = 0; i < Len; i++, buf++) {
+ if ((i%sizeof(SK_U32)) == 0) {
+ /*
+ * At the begin of each cycle read the Data Reg
+ * So it is initialized even if only a few bytes
+ * are written.
+ */
+ AdrReg = (SK_U16) Addr;
+ AdrReg &= ~VPD_WRITE; /* READ operation */
+
+ VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg);
+
+ /* Wait for termination */
+ Rtv = VpdWait(pAC, IoC, VPD_READ);
+ if (Rtv != 0) {
+ return(i);
+ }
+ }
+
+ /* Write current Byte */
+ VPD_OUT8(pAC, IoC, PCI_VPD_DAT_REG + (i%sizeof(SK_U32)),
+ *(SK_U8*)buf);
+
+ if (((i%sizeof(SK_U32)) == 3) || (i == (Len - 1))) {
+ /* New Address needs to be written to VPD_ADDR reg */
+ AdrReg = (SK_U16) Addr;
+ Addr += sizeof(SK_U32);
+ AdrReg |= VPD_WRITE; /* WRITE operation */
+
+ VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg);
+
+ /* Wait for termination */
+ Rtv = VpdWait(pAC, IoC, VPD_WRITE);
+ if (Rtv != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("Write Timed Out\n"));
+ return(i - (i%sizeof(SK_U32)));
+ }
+
+ /*
+ * Now re-read to verify
+ */
+ AdrReg &= ~VPD_WRITE; /* READ operation */
+
+ VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg);
+
+ /* Wait for termination */
+ Rtv = VpdWait(pAC, IoC, VPD_READ);
+ if (Rtv != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("Verify Timed Out\n"));
+ return(i - (i%sizeof(SK_U32)));
+ }
+
+ for (j = 0; j <= (int)(i%sizeof(SK_U32)); j++, pComp++) {
+
+ VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + j, &Data);
+
+ if (Data != *pComp) {
+ /* Verify Error */
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("WriteStream Verify Error\n"));
+ return(i - (i%sizeof(SK_U32)) + j);
+ }
+ }
+ }
+ }
+
+ return(Len);
+}
+
+
+/*
+ * Read one Stream of 'len' bytes of VPD data, starting at 'addr' from
+ * or to the I2C EEPROM.
+ *
+ * Returns number of bytes read / written.
+ */
+static int VpdReadStream(
+SK_AC *pAC, /* Adapters context */
+SK_IOC IoC, /* IO Context */
+char *buf, /* data buffer */
+int Addr, /* VPD start address */
+int Len) /* number of bytes to read / to write */
+{
+ int i;
+ SK_U16 AdrReg;
+ int Rtv;
+
+ for (i = 0; i < Len; i++, buf++) {
+ if ((i%sizeof(SK_U32)) == 0) {
+ /* New Address needs to be written to VPD_ADDR reg */
+ AdrReg = (SK_U16) Addr;
+ Addr += sizeof(SK_U32);
+ AdrReg &= ~VPD_WRITE; /* READ operation */
+
+ VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg);
+
+ /* Wait for termination */
+ Rtv = VpdWait(pAC, IoC, VPD_READ);
+ if (Rtv != 0) {
+ return(i);
+ }
+ }
+ VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + (i%sizeof(SK_U32)),
+ (SK_U8 *)buf);
+ }
+
+ return(Len);
+}
+
+/*
+ * Read ore writes 'len' bytes of VPD data, starting at 'addr' from
+ * or to the I2C EEPROM.
+ *
+ * Returns number of bytes read / written.
+ */
+static int VpdTransferBlock(
+SK_AC *pAC, /* Adapters context */
+SK_IOC IoC, /* IO Context */
+char *buf, /* data buffer */
+int addr, /* VPD start address */
+int len, /* number of bytes to read / to write */
+int dir) /* transfer direction may be VPD_READ or VPD_WRITE */
+{
+ int Rtv; /* Return value */
+ int vpd_rom_size;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("VPD %s block, addr = 0x%x, len = %d\n",
+ dir ? "write" : "read", addr, len));
+
+ if (len == 0)
+ return(0);
+
+ vpd_rom_size = pAC->vpd.rom_size;
+
+ if (addr > vpd_rom_size - 4) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+ ("Address error: 0x%x, exp. < 0x%x\n",
+ addr, vpd_rom_size - 4));
+ return(0);
+ }
+
+ if (addr + len > vpd_rom_size) {
+ len = vpd_rom_size - addr;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("Warning: len was cut to %d\n", len));
+ }
+
+ if (dir == VPD_READ) {
+ Rtv = VpdReadStream(pAC, IoC, buf, addr, len);
+ }
+ else {
+ Rtv = VpdWriteStream(pAC, IoC, buf, addr, len);
+ }
+
+ return(Rtv);
+}
+
+#ifdef SKDIAG
+
+/*
+ * Read 'len' bytes of VPD data, starting at 'addr'.
+ *
+ * Returns number of bytes read.
+ */
+int VpdReadBlock(
+SK_AC *pAC, /* pAC pointer */
+SK_IOC IoC, /* IO Context */
+char *buf, /* buffer were the data should be stored */
+int addr, /* start reading at the VPD address */
+int len) /* number of bytes to read */
+{
+ return(VpdTransferBlock(pAC, IoC, buf, addr, len, VPD_READ));
+}
+
+/*
+ * Write 'len' bytes of *but to the VPD EEPROM, starting at 'addr'.
+ *
+ * Returns number of bytes writes.
+ */
+int VpdWriteBlock(
+SK_AC *pAC, /* pAC pointer */
+SK_IOC IoC, /* IO Context */
+char *buf, /* buffer, holds the data to write */
+int addr, /* start writing at the VPD address */
+int len) /* number of bytes to write */
+{
+ return(VpdTransferBlock(pAC, IoC, buf, addr, len, VPD_WRITE));
+}
+#endif /* SKDIAG */
+
+/*
+ * (re)initialize the VPD buffer
+ *
+ * Reads the VPD data from the EEPROM into the VPD buffer.
+ * Get the remaining read only and read / write space.
+ *
+ * return 0: success
+ * 1: fatal VPD error
+ */
+static int VpdInit(
+SK_AC *pAC, /* Adapters context */
+SK_IOC IoC) /* IO Context */
+{
+ SK_VPD_PARA *r, rp; /* RW or RV */
+ int i;
+ unsigned char x;
+ int vpd_size;
+ SK_U16 dev_id;
+ SK_U32 our_reg2;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT, ("VpdInit .. "));
+
+ VPD_IN16(pAC, IoC, PCI_DEVICE_ID, &dev_id);
+
+ VPD_IN32(pAC, IoC, PCI_OUR_REG_2, &our_reg2);
+
+ pAC->vpd.rom_size = 256 << ((our_reg2 & PCI_VPD_ROM_SZ) >> 14);
+
+ /*
+ * this function might get used before the hardware is initialized
+ * therefore we cannot always trust in GIChipId
+ */
+ if (((pAC->vpd.v.vpd_status & VPD_VALID) == 0 &&
+ dev_id != VPD_DEV_ID_GENESIS) ||
+ ((pAC->vpd.v.vpd_status & VPD_VALID) != 0 &&
+ !pAC->GIni.GIGenesis)) {
+
+ /* for Yukon the VPD size is always 256 */
+ vpd_size = VPD_SIZE_YUKON;
+ }
+ else {
+ /* Genesis uses the maximum ROM size up to 512 for VPD */
+ if (pAC->vpd.rom_size > VPD_SIZE_GENESIS) {
+ vpd_size = VPD_SIZE_GENESIS;
+ }
+ else {
+ vpd_size = pAC->vpd.rom_size;
+ }
+ }
+
+ /* read the VPD data into the VPD buffer */
+ if (VpdTransferBlock(pAC, IoC, pAC->vpd.vpd_buf, 0, vpd_size, VPD_READ)
+ != vpd_size) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("Block Read Error\n"));
+ return(1);
+ }
+
+ pAC->vpd.vpd_size = vpd_size;
+
+ /* find the end tag of the RO area */
+ if (!(r = vpd_find_para(pAC, VPD_RV, &rp))) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+ ("Encoding Error: RV Tag not found\n"));
+ return(1);
+ }
+
+ if (r->p_val + r->p_len > pAC->vpd.vpd_buf + vpd_size/2) {
+ SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+ ("Encoding Error: Invalid VPD struct size\n"));
+ return(1);
+ }
+ pAC->vpd.v.vpd_free_ro = r->p_len - 1;
+
+ /* test the checksum */
+ for (i = 0, x = 0; (unsigned)i <= (unsigned)vpd_size/2 - r->p_len; i++) {
+ x += pAC->vpd.vpd_buf[i];
+ }
+
+ if (x != 0) {
+ /* checksum error */
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+ ("VPD Checksum Error\n"));
+ return(1);
+ }
+
+ /* find and check the end tag of the RW area */
+ if (!(r = vpd_find_para(pAC, VPD_RW, &rp))) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+ ("Encoding Error: RV Tag not found\n"));
+ return(1);
+ }
+
+ if (r->p_val < pAC->vpd.vpd_buf + vpd_size/2) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+ ("Encoding Error: Invalid VPD struct size\n"));
+ return(1);
+ }
+ pAC->vpd.v.vpd_free_rw = r->p_len;
+
+ /* everything seems to be ok */
+ if (pAC->GIni.GIChipId != 0) {
+ pAC->vpd.v.vpd_status |= VPD_VALID;
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT,
+ ("done. Free RO = %d, Free RW = %d\n",
+ pAC->vpd.v.vpd_free_ro, pAC->vpd.v.vpd_free_rw));
+
+ return(0);
+}
+
+/*
+ * find the Keyword 'key' in the VPD buffer and fills the
+ * parameter struct 'p' with it's values
+ *
+ * returns *p success
+ * 0: parameter was not found or VPD encoding error
+ */
+static SK_VPD_PARA *vpd_find_para(
+SK_AC *pAC, /* common data base */
+const char *key, /* keyword to find (e.g. "MN") */
+SK_VPD_PARA *p) /* parameter description struct */
+{
+ char *v ; /* points to VPD buffer */
+ int max; /* Maximum Number of Iterations */
+
+ v = pAC->vpd.vpd_buf;
+ max = 128;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("VPD find para %s .. ",key));
+
+ /* check mandatory resource type ID string (Product Name) */
+ if (*v != (char)RES_ID) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+ ("Error: 0x%x missing\n", RES_ID));
+ return(0);
+ }
+
+ if (strcmp(key, VPD_NAME) == 0) {
+ p->p_len = VPD_GET_RES_LEN(v);
+ p->p_val = VPD_GET_VAL(v);
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("found, len = %d\n", p->p_len));
+ return(p);
+ }
+
+ v += 3 + VPD_GET_RES_LEN(v) + 3;
+ for (;; ) {
+ if (SK_MEMCMP(key,v,2) == 0) {
+ p->p_len = VPD_GET_VPD_LEN(v);
+ p->p_val = VPD_GET_VAL(v);
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("found, len = %d\n",p->p_len));
+ return(p);
+ }
+
+ /* exit when reaching the "RW" Tag or the maximum of itera. */
+ max--;
+ if (SK_MEMCMP(VPD_RW,v,2) == 0 || max == 0) {
+ break;
+ }
+
+ if (SK_MEMCMP(VPD_RV,v,2) == 0) {
+ v += 3 + VPD_GET_VPD_LEN(v) + 3; /* skip VPD-W */
+ }
+ else {
+ v += 3 + VPD_GET_VPD_LEN(v);
+ }
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("scanning '%c%c' len = %d\n",v[0],v[1],v[2]));
+ }
+
+#ifdef DEBUG
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, ("not found\n"));
+ if (max == 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+ ("Key/Len Encoding error\n"));
+ }
+#endif /* DEBUG */
+ return(0);
+}
+
+/*
+ * Move 'n' bytes. Begin with the last byte if 'n' is > 0,
+ * Start with the last byte if n is < 0.
+ *
+ * returns nothing
+ */
+static void vpd_move_para(
+char *start, /* start of memory block */
+char *end, /* end of memory block to move */
+int n) /* number of bytes the memory block has to be moved */
+{
+ char *p;
+ int i; /* number of byte copied */
+
+ if (n == 0)
+ return;
+
+ i = (int) (end - start + 1);
+ if (n < 0) {
+ p = start + n;
+ while (i != 0) {
+ *p++ = *start++;
+ i--;
+ }
+ }
+ else {
+ p = end + n;
+ while (i != 0) {
+ *p-- = *end--;
+ i--;
+ }
+ }
+}
+
+/*
+ * setup the VPD keyword 'key' at 'ip'.
+ *
+ * returns nothing
+ */
+static void vpd_insert_key(
+const char *key, /* keyword to insert */
+const char *buf, /* buffer with the keyword value */
+int len, /* length of the value string */
+char *ip) /* inseration point */
+{
+ SK_VPD_KEY *p;
+
+ p = (SK_VPD_KEY *) ip;
+ p->p_key[0] = key[0];
+ p->p_key[1] = key[1];
+ p->p_len = (unsigned char) len;
+ SK_MEMCPY(&p->p_val,buf,len);
+}
+
+/*
+ * Setup the VPD end tag "RV" / "RW".
+ * Also correct the remaining space variables vpd_free_ro / vpd_free_rw.
+ *
+ * returns 0: success
+ * 1: encoding error
+ */
+static int vpd_mod_endtag(
+SK_AC *pAC, /* common data base */
+char *etp) /* end pointer input position */
+{
+ SK_VPD_KEY *p;
+ unsigned char x;
+ int i;
+ int vpd_size;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("VPD modify endtag at 0x%x = '%c%c'\n",etp,etp[0],etp[1]));
+
+ vpd_size = pAC->vpd.vpd_size;
+
+ p = (SK_VPD_KEY *) etp;
+
+ if (p->p_key[0] != 'R' || (p->p_key[1] != 'V' && p->p_key[1] != 'W')) {
+ /* something wrong here, encoding error */
+ SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+ ("Encoding Error: invalid end tag\n"));
+ return(1);
+ }
+ if (etp > pAC->vpd.vpd_buf + vpd_size/2) {
+ /* create "RW" tag */
+ p->p_len = (unsigned char)(pAC->vpd.vpd_buf+vpd_size-etp-3-1);
+ pAC->vpd.v.vpd_free_rw = (int) p->p_len;
+ i = pAC->vpd.v.vpd_free_rw;
+ etp += 3;
+ }
+ else {
+ /* create "RV" tag */
+ p->p_len = (unsigned char)(pAC->vpd.vpd_buf+vpd_size/2-etp-3);
+ pAC->vpd.v.vpd_free_ro = (int) p->p_len - 1;
+
+ /* setup checksum */
+ for (i = 0, x = 0; i < vpd_size/2 - p->p_len; i++) {
+ x += pAC->vpd.vpd_buf[i];
+ }
+ p->p_val = (char) 0 - x;
+ i = pAC->vpd.v.vpd_free_ro;
+ etp += 4;
+ }
+ while (i) {
+ *etp++ = 0x00;
+ i--;
+ }
+
+ return(0);
+}
+
+/*
+ * Insert a VPD keyword into the VPD buffer.
+ *
+ * The keyword 'key' is inserted at the position 'ip' in the
+ * VPD buffer.
+ * The keywords behind the input position will
+ * be moved. The VPD end tag "RV" or "RW" is generated again.
+ *
+ * returns 0: success
+ * 2: value string was cut
+ * 4: VPD full, keyword was not written
+ * 6: fatal VPD error
+ *
+ */
+int VpdSetupPara(
+SK_AC *pAC, /* common data base */
+const char *key, /* keyword to insert */
+const char *buf, /* buffer with the keyword value */
+int len, /* length of the keyword value */
+int type, /* VPD_RO_KEY or VPD_RW_KEY */
+int op) /* operation to do: ADD_KEY or OWR_KEY */
+{
+ SK_VPD_PARA vp;
+ char *etp; /* end tag position */
+ int free; /* remaining space in selected area */
+ char *ip; /* input position inside the VPD buffer */
+ int rtv; /* return code */
+ int head; /* additional haeder bytes to move */
+ int found; /* additinoal bytes if the keyword was found */
+ int vpd_size;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("VPD setup para key = %s, val = %s\n",key,buf));
+
+ vpd_size = pAC->vpd.vpd_size;
+
+ rtv = 0;
+ ip = 0;
+ if (type == VPD_RW_KEY) {
+ /* end tag is "RW" */
+ free = pAC->vpd.v.vpd_free_rw;
+ etp = pAC->vpd.vpd_buf + (vpd_size - free - 1 - 3);
+ }
+ else {
+ /* end tag is "RV" */
+ free = pAC->vpd.v.vpd_free_ro;
+ etp = pAC->vpd.vpd_buf + (vpd_size/2 - free - 4);
+ }
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("Free RO = %d, Free RW = %d\n",
+ pAC->vpd.v.vpd_free_ro, pAC->vpd.v.vpd_free_rw));
+
+ head = 0;
+ found = 0;
+ if (op == OWR_KEY) {
+ if (vpd_find_para(pAC, key, &vp)) {
+ found = 3;
+ ip = vp.p_val - 3;
+ free += vp.p_len + 3;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("Overwrite Key\n"));
+ }
+ else {
+ op = ADD_KEY;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+ ("Add Key\n"));
+ }
+ }
+ if (op == ADD_KEY) {
+ ip = etp;
+ vp.p_len = 0;
+ head = 3;
+ }
+
+ if (len + 3 > free) {
+ if (free < 7) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("VPD Buffer Overflow, keyword not written\n"));
+ return(4);
+ }
+ /* cut it again */
+ len = free - 3;
+ rtv = 2;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("VPD Buffer Full, Keyword was cut\n"));
+ }
+
+ vpd_move_para(ip + vp.p_len + found, etp+2, len-vp.p_len+head);
+ vpd_insert_key(key, buf, len, ip);
+ if (vpd_mod_endtag(pAC, etp + len - vp.p_len + head)) {
+ pAC->vpd.v.vpd_status &= ~VPD_VALID;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("VPD Encoding Error\n"));
+ return(6);
+ }
+
+ return(rtv);
+}
+
+
+/*
+ * Read the contents of the VPD EEPROM and copy it to the
+ * VPD buffer if not already done.
+ *
+ * return: A pointer to the vpd_status structure. The structure contains
+ * this fields.
+ */
+SK_VPD_STATUS *VpdStat(
+SK_AC *pAC, /* Adapters context */
+SK_IOC IoC) /* IO Context */
+{
+ if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
+ (void)VpdInit(pAC, IoC);
+ }
+ return(&pAC->vpd.v);
+}
+
+
+/*
+ * Read the contents of the VPD EEPROM and copy it to the VPD
+ * buffer if not already done.
+ * Scan the VPD buffer for VPD keywords and create the VPD
+ * keyword list by copying the keywords to 'buf', all after
+ * each other and terminated with a '\0'.
+ *
+ * Exceptions: o The Resource Type ID String (product name) is called "Name"
+ * o The VPD end tags 'RV' and 'RW' are not listed
+ *
+ * The number of copied keywords is counted in 'elements'.
+ *
+ * returns 0: success
+ * 2: buffer overfull, one or more keywords are missing
+ * 6: fatal VPD error
+ *
+ * example values after returning:
+ *
+ * buf = "Name\0PN\0EC\0MN\0SN\0CP\0VF\0VL\0YA\0"
+ * *len = 30
+ * *elements = 9
+ */
+int VpdKeys(
+SK_AC *pAC, /* common data base */
+SK_IOC IoC, /* IO Context */
+char *buf, /* buffer where to copy the keywords */
+int *len, /* buffer length */
+int *elements) /* number of keywords returned */
+{
+ char *v;
+ int n;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("list VPD keys .. "));
+ *elements = 0;
+ if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
+ if (VpdInit(pAC, IoC) != 0) {
+ *len = 0;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("VPD Init Error, terminated\n"));
+ return(6);
+ }
+ }
+
+ if ((signed)strlen(VPD_NAME) + 1 <= *len) {
+ v = pAC->vpd.vpd_buf;
+ strcpy(buf,VPD_NAME);
+ n = strlen(VPD_NAME) + 1;
+ buf += n;
+ *elements = 1;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX,
+ ("'%c%c' ",v[0],v[1]));
+ }
+ else {
+ *len = 0;
+ SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR,
+ ("buffer overflow\n"));
+ return(2);
+ }
+
+ v += 3 + VPD_GET_RES_LEN(v) + 3;
+ for (;; ) {
+ /* exit when reaching the "RW" Tag */
+ if (SK_MEMCMP(VPD_RW,v,2) == 0) {
+ break;
+ }
+
+ if (SK_MEMCMP(VPD_RV,v,2) == 0) {
+ v += 3 + VPD_GET_VPD_LEN(v) + 3; /* skip VPD-W */
+ continue;
+ }
+
+ if (n+3 <= *len) {
+ SK_MEMCPY(buf,v,2);
+ buf += 2;
+ *buf++ = '\0';
+ n += 3;
+ v += 3 + VPD_GET_VPD_LEN(v);
+ *elements += 1;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX,
+ ("'%c%c' ",v[0],v[1]));
+ }
+ else {
+ *len = n;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("buffer overflow\n"));
+ return(2);
+ }
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("\n"));
+ *len = n;
+ return(0);
+}
+
+
+/*
+ * Read the contents of the VPD EEPROM and copy it to the
+ * VPD buffer if not already done. Search for the VPD keyword
+ * 'key' and copy its value to 'buf'. Add a terminating '\0'.
+ * If the value does not fit into the buffer cut it after
+ * 'len' - 1 bytes.
+ *
+ * returns 0: success
+ * 1: keyword not found
+ * 2: value string was cut
+ * 3: VPD transfer timeout
+ * 6: fatal VPD error
+ */
+int VpdRead(
+SK_AC *pAC, /* common data base */
+SK_IOC IoC, /* IO Context */
+const char *key, /* keyword to read (e.g. "MN") */
+char *buf, /* buffer where to copy the keyword value */
+int *len) /* buffer length */
+{
+ SK_VPD_PARA *p, vp;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("VPD read %s .. ", key));
+ if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
+ if (VpdInit(pAC, IoC) != 0) {
+ *len = 0;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("VPD init error\n"));
+ return(6);
+ }
+ }
+
+ if ((p = vpd_find_para(pAC, key, &vp)) != NULL) {
+ if (p->p_len > (*(unsigned *)len)-1) {
+ p->p_len = *len - 1;
+ }
+ SK_MEMCPY(buf, p->p_val, p->p_len);
+ buf[p->p_len] = '\0';
+ *len = p->p_len;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX,
+ ("%c%c%c%c.., len = %d\n",
+ buf[0],buf[1],buf[2],buf[3],*len));
+ }
+ else {
+ *len = 0;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, ("not found\n"));
+ return(1);
+ }
+ return(0);
+}
+
+
+/*
+ * Check whether a given key may be written
+ *
+ * returns
+ * SK_TRUE Yes it may be written
+ * SK_FALSE No it may be written
+ */
+SK_BOOL VpdMayWrite(
+char *key) /* keyword to write (allowed values "Yx", "Vx") */
+{
+ if ((*key != 'Y' && *key != 'V') ||
+ key[1] < '0' || key[1] > 'Z' ||
+ (key[1] > '9' && key[1] < 'A') || strlen(key) != 2) {
+
+ return(SK_FALSE);
+ }
+ return(SK_TRUE);
+}
+
+/*
+ * Read the contents of the VPD EEPROM and copy it to the VPD
+ * buffer if not already done. Insert/overwrite the keyword 'key'
+ * in the VPD buffer. Cut the keyword value if it does not fit
+ * into the VPD read / write area.
+ *
+ * returns 0: success
+ * 2: value string was cut
+ * 3: VPD transfer timeout
+ * 4: VPD full, keyword was not written
+ * 5: keyword cannot be written
+ * 6: fatal VPD error
+ */
+int VpdWrite(
+SK_AC *pAC, /* common data base */
+SK_IOC IoC, /* IO Context */
+const char *key, /* keyword to write (allowed values "Yx", "Vx") */
+const char *buf) /* buffer where the keyword value can be read from */
+{
+ int len; /* length of the keyword to write */
+ int rtv; /* return code */
+ int rtv2;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX,
+ ("VPD write %s = %s\n",key,buf));
+
+ if ((*key != 'Y' && *key != 'V') ||
+ key[1] < '0' || key[1] > 'Z' ||
+ (key[1] > '9' && key[1] < 'A') || strlen(key) != 2) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("illegal key tag, keyword not written\n"));
+ return(5);
+ }
+
+ if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
+ if (VpdInit(pAC, IoC) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("VPD init error\n"));
+ return(6);
+ }
+ }
+
+ rtv = 0;
+ len = strlen(buf);
+ if (len > VPD_MAX_LEN) {
+ /* cut it */
+ len = VPD_MAX_LEN;
+ rtv = 2;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("keyword too long, cut after %d bytes\n",VPD_MAX_LEN));
+ }
+ if ((rtv2 = VpdSetupPara(pAC, key, buf, len, VPD_RW_KEY, OWR_KEY)) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("VPD write error\n"));
+ return(rtv2);
+ }
+
+ return(rtv);
+}
+
+/*
+ * Read the contents of the VPD EEPROM and copy it to the
+ * VPD buffer if not already done. Remove the VPD keyword
+ * 'key' from the VPD buffer.
+ * Only the keywords in the read/write area can be deleted.
+ * Keywords in the read only area cannot be deleted.
+ *
+ * returns 0: success, keyword was removed
+ * 1: keyword not found
+ * 5: keyword cannot be deleted
+ * 6: fatal VPD error
+ */
+int VpdDelete(
+SK_AC *pAC, /* common data base */
+SK_IOC IoC, /* IO Context */
+char *key) /* keyword to read (e.g. "MN") */
+{
+ SK_VPD_PARA *p, vp;
+ char *etp;
+ int vpd_size;
+
+ vpd_size = pAC->vpd.vpd_size;
+
+ SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_TX,("VPD delete key %s\n",key));
+ if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
+ if (VpdInit(pAC, IoC) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("VPD init error\n"));
+ return(6);
+ }
+ }
+
+ if ((p = vpd_find_para(pAC, key, &vp)) != NULL) {
+ if (p->p_val < pAC->vpd.vpd_buf + vpd_size/2) {
+ /* try to delete read only keyword */
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("cannot delete RO keyword\n"));
+ return(5);
+ }
+
+ etp = pAC->vpd.vpd_buf + (vpd_size-pAC->vpd.v.vpd_free_rw-1-3);
+
+ vpd_move_para(vp.p_val+vp.p_len, etp+2,
+ - ((int)(vp.p_len + 3)));
+ if (vpd_mod_endtag(pAC, etp - vp.p_len - 3)) {
+ pAC->vpd.v.vpd_status &= ~VPD_VALID;
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("VPD encoding error\n"));
+ return(6);
+ }
+ }
+ else {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("keyword not found\n"));
+ return(1);
+ }
+
+ return(0);
+}
+
+/*
+ * If the VPD buffer contains valid data write the VPD
+ * read/write area back to the VPD EEPROM.
+ *
+ * returns 0: success
+ * 3: VPD transfer timeout
+ */
+int VpdUpdate(
+SK_AC *pAC, /* Adapters context */
+SK_IOC IoC) /* IO Context */
+{
+ int vpd_size;
+
+ vpd_size = pAC->vpd.vpd_size;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("VPD update .. "));
+ if ((pAC->vpd.v.vpd_status & VPD_VALID) != 0) {
+ if (VpdTransferBlock(pAC, IoC, pAC->vpd.vpd_buf + vpd_size/2,
+ vpd_size/2, vpd_size/2, VPD_WRITE) != vpd_size/2) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("transfer timed out\n"));
+ return(3);
+ }
+ }
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("done\n"));
+ return(0);
+}
+
+
+/*
+ * Read the contents of the VPD EEPROM and copy it to the VPD buffer
+ * if not already done. If the keyword "VF" is not present it will be
+ * created and the error log message will be stored to this keyword.
+ * If "VF" is not present the error log message will be stored to the
+ * keyword "VL". "VL" will created or overwritten if "VF" is present.
+ * The VPD read/write area is saved to the VPD EEPROM.
+ *
+ * returns nothing, errors will be ignored.
+ */
+void VpdErrLog(
+SK_AC *pAC, /* common data base */
+SK_IOC IoC, /* IO Context */
+char *msg) /* error log message */
+{
+ SK_VPD_PARA *v, vf; /* VF */
+ int len;
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX,
+ ("VPD error log msg %s\n", msg));
+ if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
+ if (VpdInit(pAC, IoC) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+ ("VPD init error\n"));
+ return;
+ }
+ }
+
+ len = strlen(msg);
+ if (len > VPD_MAX_LEN) {
+ /* cut it */
+ len = VPD_MAX_LEN;
+ }
+ if ((v = vpd_find_para(pAC, VPD_VF, &vf)) != NULL) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("overwrite VL\n"));
+ (void)VpdSetupPara(pAC, VPD_VL, msg, len, VPD_RW_KEY, OWR_KEY);
+ }
+ else {
+ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("write VF\n"));
+ (void)VpdSetupPara(pAC, VPD_VF, msg, len, VPD_RW_KEY, ADD_KEY);
+ }
+
+ (void)VpdUpdate(pAC, IoC);
+}
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
new file mode 100644
index 0000000..e6b5a95
--- /dev/null
+++ b/drivers/net/sk98lin/skxmac2.c
@@ -0,0 +1,4396 @@
+/******************************************************************************
+ *
+ * Name: skxmac2.c
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.91 $
+ * Date: $Date: 2003/02/05 15:09:34 $
+ * Purpose: Contains functions to initialize the MACs and PHYs
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ * $Log: skxmac2.c,v $
+ * Revision 1.91 2003/02/05 15:09:34 rschmidt
+ * Removed setting of 'Collision Test'-bit in SkGmInitPhyMarv().
+ * Disabled auto-update for speed, duplex and flow-control when
+ * auto-negotiation is not enabled (Bug Id #10766).
+ * Editorial changes.
+ *
+ * Revision 1.90 2003/01/29 13:35:19 rschmidt
+ * Increment Rx FIFO Overflow counter only in DEBUG-mode.
+ * Corrected define for blinking active LED.
+ *
+ * Revision 1.89 2003/01/28 16:37:45 rschmidt
+ * Changed init for blinking active LED
+ *
+ * Revision 1.88 2003/01/28 10:09:38 rschmidt
+ * Added debug outputs in SkGmInitMac().
+ * Added customized init of LED registers in SkGmInitPhyMarv(),
+ * for blinking active LED (#ifdef ACT_LED_BLINK) and
+ * for normal duplex LED (#ifdef DUP_LED_NORMAL).
+ * Editorial changes.
+ *
+ * Revision 1.87 2002/12/10 14:39:05 rschmidt
+ * Improved initialization of GPHY in SkGmInitPhyMarv().
+ * Editorial changes.
+ *
+ * Revision 1.86 2002/12/09 15:01:12 rschmidt
+ * Added setup of Ext. PHY Specific Ctrl Reg (downshift feature).
+ *
+ * Revision 1.85 2002/12/05 14:09:16 rschmidt
+ * Improved avoiding endless loop in SkGmPhyWrite(), SkGmPhyWrite().
+ * Added additional advertising for 10Base-T when 100Base-T is selected.
+ * Added case SK_PHY_MARV_FIBER for YUKON Fiber adapter.
+ * Editorial changes.
+ *
+ * Revision 1.84 2002/11/15 12:50:09 rschmidt
+ * Changed SkGmCableDiagStatus() when getting results.
+ *
+ * Revision 1.83 2002/11/13 10:28:29 rschmidt
+ * Added some typecasts to avoid compiler warnings.
+ *
+ * Revision 1.82 2002/11/13 09:20:46 rschmidt
+ * Replaced for(..) with do {} while (...) in SkXmUpdateStats().
+ * Replaced 2 macros GM_IN16() with 1 GM_IN32() in SkGmMacStatistic().
+ * Added SkGmCableDiagStatus() for Virtual Cable Test (VCT).
+ * Editorial changes.
+ *
+ * Revision 1.81 2002/10/28 14:28:08 rschmidt
+ * Changed MAC address setup for GMAC in SkGmInitMac().
+ * Optimized handling of counter overflow IRQ in SkGmOverflowStatus().
+ * Editorial changes.
+ *
+ * Revision 1.80 2002/10/14 15:29:44 rschmidt
+ * Corrected disabling of all PHY IRQs.
+ * Added WA for deviation #16 (address used for pause packets).
+ * Set Pause Mode in SkMacRxTxEnable() only for Genesis.
+ * Added IRQ and counter for Receive FIFO Overflow in DEBUG-mode.
+ * SkXmTimeStamp() replaced by SkMacTimeStamp().
+ * Added clearing of GMAC Tx FIFO Underrun IRQ in SkGmIrq().
+ * Editorial changes.
+ *
+ * Revision 1.79 2002/10/10 15:55:36 mkarl
+ * changes for PLinkSpeedUsed
+ *
+ * Revision 1.78 2002/09/12 09:39:51 rwahl
+ * Removed deactivate code for SIRQ overflow event separate for TX/RX.
+ *
+ * Revision 1.77 2002/09/09 12:26:37 mkarl
+ * added handling for Yukon to SkXmTimeStamp
+ *
+ * Revision 1.76 2002/08/21 16:41:16 rschmidt
+ * Added bit GPC_ENA_XC (Enable MDI crossover) in HWCFG_MODE.
+ * Added forced speed settings in SkGmInitPhyMarv().
+ * Added settings of full/half duplex capabilities for YUKON Fiber.
+ * Editorial changes.
+ *
+ * Revision 1.75 2002/08/16 15:12:01 rschmidt
+ * Replaced all if(GIChipId == CHIP_ID_GENESIS) with new entry GIGenesis.
+ * Added function SkMacHashing() for ADDR-Module.
+ * Removed functions SkXmClrSrcCheck(), SkXmClrHashAddr() (calls replaced
+ * with macros).
+ * Removed functions SkGmGetMuxConfig().
+ * Added HWCFG_MODE init for YUKON Fiber.
+ * Changed initialization of GPHY in SkGmInitPhyMarv().
+ * Changed check of parameter in SkXmMacStatistic().
+ * Editorial changes.
+ *
+ * Revision 1.74 2002/08/12 14:00:17 rschmidt
+ * Replaced usage of Broadcom PHY Ids with defines.
+ * Corrected error messages in SkGmMacStatistic().
+ * Made SkMacPromiscMode() public for ADDR-Modul.
+ * Editorial changes.
+ *
+ * Revision 1.73 2002/08/08 16:26:24 rschmidt
+ * Improved reset sequence for YUKON in SkGmHardRst() and SkGmInitMac().
+ * Replaced XMAC Rx High Watermark init value with SK_XM_RX_HI_WM.
+ * Editorial changes.
+ *
+ * Revision 1.72 2002/07/24 15:11:19 rschmidt
+ * Fixed wrong placement of parenthesis.
+ * Editorial changes.
+ *
+ * Revision 1.71 2002/07/23 16:05:18 rschmidt
+ * Added global functions for PHY: SkGePhyRead(), SkGePhyWrite().
+ * Fixed Tx Counter Overflow IRQ (Bug ID #10730).
+ * Editorial changes.
+ *
+ * Revision 1.70 2002/07/18 14:27:27 rwahl
+ * Fixed syntax error.
+ *
+ * Revision 1.69 2002/07/17 17:08:47 rwahl
+ * Fixed check in SkXmMacStatistic().
+ *
+ * Revision 1.68 2002/07/16 07:35:24 rwahl
+ * Removed check for cleared mib counter in SkGmResetCounter().
+ *
+ * Revision 1.67 2002/07/15 18:35:56 rwahl
+ * Added SkXmUpdateStats(), SkGmUpdateStats(), SkXmMacStatistic(),
+ * SkGmMacStatistic(), SkXmResetCounter(), SkGmResetCounter(),
+ * SkXmOverflowStatus(), SkGmOverflowStatus().
+ * Changes to SkXmIrq() & SkGmIrq(): Combined SIRQ Overflow for both
+ * RX & TX.
+ * Changes to SkGmInitMac(): call to SkGmResetCounter().
+ * Editorial changes.
+ *
+ * Revision 1.66 2002/07/15 15:59:30 rschmidt
+ * Added PHY Address in SkXmPhyRead(), SkXmPhyWrite().
+ * Added MIB Clear Counter in SkGmInitMac().
+ * Added Duplex and Flow-Control settings.
+ * Reset all Multicast filtering Hash reg. in SkGmInitMac().
+ * Added new function: SkGmGetMuxConfig().
+ * Editorial changes.
+ *
+ * Revision 1.65 2002/06/10 09:35:39 rschmidt
+ * Replaced C++ comments (//).
+ * Added #define VCPU around VCPUwaitTime.
+ * Editorial changes.
+ *
+ * Revision 1.64 2002/06/05 08:41:10 rschmidt
+ * Added function for XMAC2: SkXmTimeStamp().
+ * Added function for YUKON: SkGmSetRxCmd().
+ * Changed SkGmInitMac() resp. SkGmHardRst().
+ * Fixed wrong variable in SkXmAutoNegLipaXmac() (debug mode).
+ * SkXmRxTxEnable() replaced by SkMacRxTxEnable().
+ * Editorial changes.
+ *
+ * Revision 1.63 2002/04/25 13:04:44 rschmidt
+ * Changes for handling YUKON.
+ * Use of #ifdef OTHER_PHY to eliminate code for unused Phy types.
+ * Macros for XMAC PHY access PHY_READ(), PHY_WRITE() replaced
+ * by functions SkXmPhyRead(), SkXmPhyWrite();
+ * Removed use of PRxCmd to setup XMAC.
+ * Added define PHY_B_AS_PAUSE_MSK for BCom Pause Res.
+ * Added setting of XM_RX_DIS_CEXT in SkXmInitMac().
+ * Removed status parameter from MAC IRQ handler SkMacIrq(),
+ * SkXmIrq() and SkGmIrq().
+ * SkXmAutoNegLipa...() for ext. Phy replaced by SkMacAutoNegLipaPhy().
+ * Added SkMac...() functions to handle both XMAC and GMAC.
+ * Added functions for YUKON: SkGmHardRst(), SkGmSoftRst(),
+ * SkGmSetRxTxEn(), SkGmIrq(), SkGmInitMac(), SkGmInitPhyMarv(),
+ * SkGmAutoNegDoneMarv(), SkGmPhyRead(), SkGmPhyWrite().
+ * Changes for V-CPU support.
+ * Editorial changes.
+ *
+ * Revision 1.62 2001/08/06 09:50:14 rschmidt
+ * Workaround BCOM Errata #1 for the C5 type.
+ * Editorial changes.
+ *
+ * Revision 1.61 2001/02/09 15:40:59 rassmann
+ * Editorial changes.
+ *
+ * Revision 1.60 2001/02/07 15:02:01 cgoos
+ * Added workaround for Fujitsu switch link down.
+ *
+ * Revision 1.59 2001/01/10 09:38:06 cgoos
+ * Fixed Broadcom C0/A1 Id check for workaround.
+ *
+ * Revision 1.58 2000/11/29 11:30:38 cgoos
+ * Changed DEBUG sections with NW output to xDEBUG
+ *
+ * Revision 1.57 2000/11/27 12:40:40 rassmann
+ * Suppressing preamble after first access to BCom, not before (#10556).
+ *
+ * Revision 1.56 2000/11/09 12:32:48 rassmann
+ * Renamed variables.
+ *
+ * Revision 1.55 2000/11/09 11:30:10 rassmann
+ * WA: Waiting after releasing reset until BCom chip is accessible.
+ *
+ * Revision 1.54 2000/10/02 14:10:27 rassmann
+ * Reading BCOM PHY after releasing reset until it returns a valid value.
+ *
+ * Revision 1.53 2000/07/27 12:22:11 gklug
+ * fix: possible endless loop in XmHardRst.
+ *
+ * Revision 1.52 2000/05/22 08:48:31 malthoff
+ * Fix: #10523 errata valid for all BCOM PHYs.
+ *
+ * Revision 1.51 2000/05/17 12:52:18 malthoff
+ * Fixes BCom link errata (#10523).
+ *
+ * Revision 1.50 1999/11/22 13:40:14 cgoos
+ * Changed license header to GPL.
+ *
+ * Revision 1.49 1999/11/22 08:12:13 malthoff
+ * Add workaround for power consumption feature of BCom C0 chip.
+ *
+ * Revision 1.48 1999/11/16 08:39:01 malthoff
+ * Fix: MDIO preamble suppression is port dependent.
+ *
+ * Revision 1.47 1999/08/27 08:55:35 malthoff
+ * 1000BT: Optimizing MDIO transfer by oppressing MDIO preamble.
+ *
+ * Revision 1.46 1999/08/13 11:01:12 malthoff
+ * Fix for 1000BT: pFlowCtrlMode was not set correctly.
+ *
+ * Revision 1.45 1999/08/12 19:18:28 malthoff
+ * 1000BT Fixes: Do not owerwrite XM_MMU_CMD.
+ * Do not execute BCOM A1 workaround for B1 chips.
+ * Fix pause frame setting.
+ * Always set PHY_B_AC_TX_TST in PHY_BCOM_AUX_CTRL.
+ *
+ * Revision 1.44 1999/08/03 15:23:48 cgoos
+ * Fixed setting of PHY interrupt mask in half duplex mode.
+ *
+ * Revision 1.43 1999/08/03 15:22:17 cgoos
+ * Added some debug output.
+ * Disabled XMac GP0 interrupt for external PHYs.
+ *
+ * Revision 1.42 1999/08/02 08:39:23 malthoff
+ * BCOM PHY: TX LED: To get the mono flop behaviour it is required
+ * to set the LED Traffic Mode bit in PHY_BCOM_P_EXT_CTRL.
+ *
+ * Revision 1.41 1999/07/30 06:54:31 malthoff
+ * Add temp. workarounds for the BCOM Phy revision A1.
+ *
+ * Revision 1.40 1999/06/01 07:43:26 cgoos
+ * Changed Link Mode Status in SkXmAutoNegDone... from FULL/HALF to
+ * AUTOFULL/AUTOHALF.
+ *
+ * Revision 1.39 1999/05/19 07:29:51 cgoos
+ * Changes for 1000Base-T.
+ *
+ * Revision 1.38 1999/04/08 14:35:10 malthoff
+ * Add code for enabling signal detect. Enabling signal detect is disabled.
+ *
+ * Revision 1.37 1999/03/12 13:42:54 malthoff
+ * Add: Jumbo Frame Support.
+ * Add: Receive modes SK_LENERR_OK_ON/OFF and
+ * SK_BIG_PK_OK_ON/OFF in SkXmSetRxCmd().
+ *
+ * Revision 1.36 1999/03/08 10:10:55 gklug
+ * fix: AutoSensing did switch to next mode even if LiPa indicated offline
+ *
+ * Revision 1.35 1999/02/22 15:16:41 malthoff
+ * Remove some compiler warnings.
+ *
+ * Revision 1.34 1999/01/22 09:19:59 gklug
+ * fix: Init DupMode and InitPauseMd are now called in RxTxEnable
+ *
+ * Revision 1.33 1998/12/11 15:19:11 gklug
+ * chg: lipa autoneg stati
+ * chg: debug messages
+ * chg: do NOT use spurious XmIrq
+ *
+ * Revision 1.32 1998/12/10 11:08:44 malthoff
+ * bug fix: pAC has been used for IOs in SkXmHardRst().
+ * SkXmInitPhy() is also called for the Diag in SkXmInitMac().
+ *
+ * Revision 1.31 1998/12/10 10:39:11 gklug
+ * fix: do 4 RESETS of the XMAC at the beginning
+ * fix: dummy read interrupt source register BEFORE initializing the Phy
+ * add: debug messages
+ * fix: Linkpartners autoneg capability cannot be shown by TX_PAGE interrupt
+ *
+ * Revision 1.30 1998/12/07 12:18:32 gklug
+ * add: refinement of autosense mode: take into account the autoneg cap of LiPa
+ *
+ * Revision 1.29 1998/12/07 07:12:29 gklug
+ * fix: if page is received the link is down.
+ *
+ * Revision 1.28 1998/12/01 10:12:47 gklug
+ * chg: if spurious IRQ from XMAC encountered, save it
+ *
+ * Revision 1.27 1998/11/26 07:33:38 gklug
+ * add: InitPhy call is now in XmInit function
+ *
+ * Revision 1.26 1998/11/18 13:38:24 malthoff
+ * 'Imsk' is also unused in SkXmAutoNegDone.
+ *
+ * Revision 1.25 1998/11/18 13:28:01 malthoff
+ * Remove unused variable 'Reg' in SkXmAutoNegDone().
+ *
+ * Revision 1.24 1998/11/18 13:18:45 gklug
+ * add: workaround for xmac errata #1
+ * add: detect Link Down also when Link partner requested config
+ * chg: XMIrq is only used when link is up
+ *
+ * Revision 1.23 1998/11/04 07:07:04 cgoos
+ * Added function SkXmRxTxEnable.
+ *
+ * Revision 1.22 1998/10/30 07:35:54 gklug
+ * fix: serve LinkDown interrupt when link is already down
+ *
+ * Revision 1.21 1998/10/29 15:32:03 gklug
+ * fix: Link Down signaling
+ *
+ * Revision 1.20 1998/10/29 11:17:27 gklug
+ * fix: AutoNegDone bug
+ *
+ * Revision 1.19 1998/10/29 10:14:43 malthoff
+ * Add endainesss comment for reading/writing MAC addresses.
+ *
+ * Revision 1.18 1998/10/28 07:48:55 cgoos
+ * Fix: ASS somtimes signaled although link is up.
+ *
+ * Revision 1.17 1998/10/26 07:55:39 malthoff
+ * Fix in SkXmInitPauseMd(): Pause Mode
+ * was disabled and not enabled.
+ * Fix in SkXmAutoNegDone(): Checking Mode bits
+ * always failed, becaues of some missing braces.
+ *
+ * Revision 1.16 1998/10/22 09:46:52 gklug
+ * fix SysKonnectFileId typo
+ *
+ * Revision 1.15 1998/10/21 05:51:37 gklug
+ * add: para DoLoop to InitPhy function for loopback set-up
+ *
+ * Revision 1.14 1998/10/16 10:59:23 malthoff
+ * Remove Lint warning for dummy reads.
+ *
+ * Revision 1.13 1998/10/15 14:01:20 malthoff
+ * Fix: SkXmAutoNegDone() is (int) but does not return a value.
+ *
+ * Revision 1.12 1998/10/14 14:45:04 malthoff
+ * Remove SKERR_SIRQ_E0xx and SKERR_SIRQ_E0xxMSG by
+ * SKERR_HWI_Exx and SKERR_HWI_E0xxMSG to be independent
+ * from the Sirq module.
+ *
+ * Revision 1.11 1998/10/14 13:59:01 gklug
+ * add: InitPhy function
+ *
+ * Revision 1.10 1998/10/14 11:20:57 malthoff
+ * Make SkXmAutoNegDone() public, because it's
+ * used in diagnostics, too.
+ * The Link Up event to the RLMT is issued in SkXmIrq().
+ * SkXmIrq() is not available in diagnostics.
+ * Use PHY_READ when reading PHY registers.
+ *
+ * Revision 1.9 1998/10/14 05:50:10 cgoos
+ * Added definition for Para.
+ *
+ * Revision 1.8 1998/10/14 05:41:28 gklug
+ * add: Xmac IRQ
+ * add: auto-negotiation done function
+ *
+ * Revision 1.7 1998/10/09 06:55:20 malthoff
+ * The configuration of the XMACs Tx Request Threshold
+ * depends from the drivers port usage now. The port
+ * usage is configured in GIPortUsage.
+ *
+ * Revision 1.6 1998/10/05 07:48:00 malthoff
+ * minor changes
+ *
+ * Revision 1.5 1998/10/01 07:03:54 gklug
+ * add: dummy function for XMAC ISR
+ *
+ * Revision 1.4 1998/09/30 12:37:44 malthoff
+ * Add SkXmSetRxCmd() and related code.
+ *
+ * Revision 1.3 1998/09/28 13:26:40 malthoff
+ * Add SkXmInitMac(), SkXmInitDupMd(), and SkXmInitPauseMd()
+ *
+ * Revision 1.2 1998/09/16 14:34:21 malthoff
+ * Add SkXmClrExactAddr(), SkXmClrSrcCheck(),
+ * SkXmClrHashAddr(), SkXmFlushTxFifo(),
+ * SkXmFlushRxFifo(), and SkXmHardRst().
+ * Finish Coding of SkXmSoftRst().
+ * The sources may be compiled now.
+ *
+ * Revision 1.1 1998/09/04 10:05:56 malthoff
+ * Created.
+ *
+ *
+ ******************************************************************************/
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+
+/* typedefs *******************************************************************/
+
+/* BCOM PHY magic pattern list */
+typedef struct s_PhyHack {
+ int PhyReg; /* Phy register */
+ SK_U16 PhyVal; /* Value to write */
+} BCOM_HACK;
+
+/* local variables ************************************************************/
+static const char SysKonnectFileId[] =
+ "@(#)$Id: skxmac2.c,v 1.91 2003/02/05 15:09:34 rschmidt Exp $ (C) SK ";
+
+BCOM_HACK BcomRegA1Hack[] = {
+ { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 },
+ { 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 },
+ { 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 },
+ { 0, 0 }
+};
+BCOM_HACK BcomRegC0Hack[] = {
+ { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1204 }, { 0x17, 0x0013 },
+ { 0x15, 0x0A04 }, { 0x18, 0x0420 },
+ { 0, 0 }
+};
+
+/* function prototypes ********************************************************/
+static void SkXmInitPhyXmac(SK_AC*, SK_IOC, int, SK_BOOL);
+static void SkXmInitPhyBcom(SK_AC*, SK_IOC, int, SK_BOOL);
+static void SkGmInitPhyMarv(SK_AC*, SK_IOC, int, SK_BOOL);
+static int SkXmAutoNegDoneXmac(SK_AC*, SK_IOC, int);
+static int SkXmAutoNegDoneBcom(SK_AC*, SK_IOC, int);
+static int SkGmAutoNegDoneMarv(SK_AC*, SK_IOC, int);
+#ifdef OTHER_PHY
+static void SkXmInitPhyLone(SK_AC*, SK_IOC, int, SK_BOOL);
+static void SkXmInitPhyNat (SK_AC*, SK_IOC, int, SK_BOOL);
+static int SkXmAutoNegDoneLone(SK_AC*, SK_IOC, int);
+static int SkXmAutoNegDoneNat (SK_AC*, SK_IOC, int);
+#endif /* OTHER_PHY */
+
+
+/******************************************************************************
+ *
+ * SkXmPhyRead() - Read from XMAC PHY register
+ *
+ * Description: reads a 16-bit word from XMAC PHY or ext. PHY
+ *
+ * Returns:
+ * nothing
+ */
+void SkXmPhyRead(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+int Port, /* Port Index (MAC_1 + n) */
+int PhyReg, /* Register Address (Offset) */
+SK_U16 *pVal) /* Pointer to Value */
+{
+ SK_U16 Mmu;
+ SK_GEPORT *pPrt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* write the PHY register's address */
+ XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr);
+
+ /* get the PHY register's value */
+ XM_IN16(IoC, Port, XM_PHY_DATA, pVal);
+
+ if (pPrt->PhyType != SK_PHY_XMAC) {
+ do {
+ XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu);
+ /* wait until 'Ready' is set */
+ } while ((Mmu & XM_MMU_PHY_RDY) == 0);
+
+ /* get the PHY register's value */
+ XM_IN16(IoC, Port, XM_PHY_DATA, pVal);
+ }
+} /* SkXmPhyRead */
+
+
+/******************************************************************************
+ *
+ * SkXmPhyWrite() - Write to XMAC PHY register
+ *
+ * Description: writes a 16-bit word to XMAC PHY or ext. PHY
+ *
+ * Returns:
+ * nothing
+ */
+void SkXmPhyWrite(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+int Port, /* Port Index (MAC_1 + n) */
+int PhyReg, /* Register Address (Offset) */
+SK_U16 Val) /* Value */
+{
+ SK_U16 Mmu;
+ SK_GEPORT *pPrt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (pPrt->PhyType != SK_PHY_XMAC) {
+ do {
+ XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu);
+ /* wait until 'Busy' is cleared */
+ } while ((Mmu & XM_MMU_PHY_BUSY) != 0);
+ }
+
+ /* write the PHY register's address */
+ XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr);
+
+ /* write the PHY register's value */
+ XM_OUT16(IoC, Port, XM_PHY_DATA, Val);
+
+ if (pPrt->PhyType != SK_PHY_XMAC) {
+ do {
+ XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu);
+ /* wait until 'Busy' is cleared */
+ } while ((Mmu & XM_MMU_PHY_BUSY) != 0);
+ }
+} /* SkXmPhyWrite */
+
+
+/******************************************************************************
+ *
+ * SkGmPhyRead() - Read from GPHY register
+ *
+ * Description: reads a 16-bit word from GPHY through MDIO
+ *
+ * Returns:
+ * nothing
+ */
+void SkGmPhyRead(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+int Port, /* Port Index (MAC_1 + n) */
+int PhyReg, /* Register Address (Offset) */
+SK_U16 *pVal) /* Pointer to Value */
+{
+ SK_U16 Ctrl;
+ SK_GEPORT *pPrt;
+#ifdef VCPU
+ u_long SimCyle;
+ u_long SimLowTime;
+
+ VCPUgetTime(&SimCyle, &SimLowTime);
+ VCPUprintf(0, "SkGmPhyRead(%u), SimCyle=%u, SimLowTime=%u\n",
+ PhyReg, SimCyle, SimLowTime);
+#endif /* VCPU */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* set PHY-Register offset and 'Read' OpCode (= 1) */
+ *pVal = (SK_U16)(GM_SMI_CT_PHY_AD(pPrt->PhyAddr) |
+ GM_SMI_CT_REG_AD(PhyReg) | GM_SMI_CT_OP_RD);
+
+ GM_OUT16(IoC, Port, GM_SMI_CTRL, *pVal);
+
+ GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
+
+ /* additional check for MDC/MDIO activity */
+ if ((Ctrl & GM_SMI_CT_BUSY) == 0) {
+ *pVal = 0;
+ return;
+ }
+
+ *pVal |= GM_SMI_CT_BUSY;
+
+ do {
+#ifdef VCPU
+ VCPUwaitTime(1000);
+#endif /* VCPU */
+
+ GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
+
+ /* wait until 'ReadValid' is set */
+ } while (Ctrl == *pVal);
+
+ /* get the PHY register's value */
+ GM_IN16(IoC, Port, GM_SMI_DATA, pVal);
+
+#ifdef VCPU
+ VCPUgetTime(&SimCyle, &SimLowTime);
+ VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n",
+ SimCyle, SimLowTime);
+#endif /* VCPU */
+} /* SkGmPhyRead */
+
+
+/******************************************************************************
+ *
+ * SkGmPhyWrite() - Write to GPHY register
+ *
+ * Description: writes a 16-bit word to GPHY through MDIO
+ *
+ * Returns:
+ * nothing
+ */
+void SkGmPhyWrite(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+int Port, /* Port Index (MAC_1 + n) */
+int PhyReg, /* Register Address (Offset) */
+SK_U16 Val) /* Value */
+{
+ SK_U16 Ctrl;
+ SK_GEPORT *pPrt;
+#ifdef VCPU
+ SK_U32 DWord;
+ u_long SimCyle;
+ u_long SimLowTime;
+
+ VCPUgetTime(&SimCyle, &SimLowTime);
+ VCPUprintf(0, "SkGmPhyWrite(Reg=%u, Val=0x%04x), SimCyle=%u, SimLowTime=%u\n",
+ PhyReg, Val, SimCyle, SimLowTime);
+#endif /* VCPU */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* write the PHY register's value */
+ GM_OUT16(IoC, Port, GM_SMI_DATA, Val);
+
+ /* set PHY-Register offset and 'Write' OpCode (= 0) */
+ Val = GM_SMI_CT_PHY_AD(pPrt->PhyAddr) | GM_SMI_CT_REG_AD(PhyReg);
+
+ GM_OUT16(IoC, Port, GM_SMI_CTRL, Val);
+
+ GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
+
+ /* additional check for MDC/MDIO activity */
+ if ((Ctrl & GM_SMI_CT_BUSY) == 0) {
+ return;
+ }
+
+ Val |= GM_SMI_CT_BUSY;
+
+ do {
+#ifdef VCPU
+ /* read Timer value */
+ SK_IN32(IoC, B2_TI_VAL, &DWord);
+
+ VCPUwaitTime(1000);
+#endif /* VCPU */
+
+ GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
+
+ /* wait until 'Busy' is cleared */
+ } while (Ctrl == Val);
+
+#ifdef VCPU
+ VCPUgetTime(&SimCyle, &SimLowTime);
+ VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n",
+ SimCyle, SimLowTime);
+#endif /* VCPU */
+} /* SkGmPhyWrite */
+
+
+/******************************************************************************
+ *
+ * SkGePhyRead() - Read from PHY register
+ *
+ * Description: calls a read PHY routine dep. on board type
+ *
+ * Returns:
+ * nothing
+ */
+void SkGePhyRead(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+int Port, /* Port Index (MAC_1 + n) */
+int PhyReg, /* Register Address (Offset) */
+SK_U16 *pVal) /* Pointer to Value */
+{
+ void (*r_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 *pVal);
+
+ if (pAC->GIni.GIGenesis) {
+ r_func = SkXmPhyRead;
+ }
+ else {
+ r_func = SkGmPhyRead;
+ }
+
+ r_func(pAC, IoC, Port, PhyReg, pVal);
+} /* SkGePhyRead */
+
+
+/******************************************************************************
+ *
+ * SkGePhyWrite() - Write to PHY register
+ *
+ * Description: calls a write PHY routine dep. on board type
+ *
+ * Returns:
+ * nothing
+ */
+void SkGePhyWrite(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* I/O Context */
+int Port, /* Port Index (MAC_1 + n) */
+int PhyReg, /* Register Address (Offset) */
+SK_U16 Val) /* Value */
+{
+ void (*w_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 Val);
+
+ if (pAC->GIni.GIGenesis) {
+ w_func = SkXmPhyWrite;
+ }
+ else {
+ w_func = SkGmPhyWrite;
+ }
+
+ w_func(pAC, IoC, Port, PhyReg, Val);
+} /* SkGePhyWrite */
+
+
+/******************************************************************************
+ *
+ * SkMacPromiscMode() - Enable / Disable Promiscuous Mode
+ *
+ * Description:
+ * enables / disables promiscuous mode by setting Mode Register (XMAC) or
+ * Receive Control Register (GMAC) dep. on board type
+ *
+ * Returns:
+ * nothing
+ */
+void SkMacPromiscMode(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL Enable) /* Enable / Disable */
+{
+ SK_U16 RcReg;
+ SK_U32 MdReg;
+
+ if (pAC->GIni.GIGenesis) {
+
+ XM_IN32(IoC, Port, XM_MODE, &MdReg);
+ /* enable or disable promiscuous mode */
+ if (Enable) {
+ MdReg |= XM_MD_ENA_PROM;
+ }
+ else {
+ MdReg &= ~XM_MD_ENA_PROM;
+ }
+ /* setup Mode Register */
+ XM_OUT32(IoC, Port, XM_MODE, MdReg);
+ }
+ else {
+
+ GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg);
+
+ /* enable or disable unicast and multicast filtering */
+ if (Enable) {
+ RcReg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
+ }
+ else {
+ RcReg |= (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
+ }
+ /* setup Receive Control Register */
+ GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg);
+ }
+} /* SkMacPromiscMode*/
+
+
+/******************************************************************************
+ *
+ * SkMacHashing() - Enable / Disable Hashing
+ *
+ * Description:
+ * enables / disables hashing by setting Mode Register (XMAC) or
+ * Receive Control Register (GMAC) dep. on board type
+ *
+ * Returns:
+ * nothing
+ */
+void SkMacHashing(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL Enable) /* Enable / Disable */
+{
+ SK_U16 RcReg;
+ SK_U32 MdReg;
+
+ if (pAC->GIni.GIGenesis) {
+
+ XM_IN32(IoC, Port, XM_MODE, &MdReg);
+ /* enable or disable hashing */
+ if (Enable) {
+ MdReg |= XM_MD_ENA_HASH;
+ }
+ else {
+ MdReg &= ~XM_MD_ENA_HASH;
+ }
+ /* setup Mode Register */
+ XM_OUT32(IoC, Port, XM_MODE, MdReg);
+ }
+ else {
+
+ GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg);
+
+ /* enable or disable multicast filtering */
+ if (Enable) {
+ RcReg |= GM_RXCR_MCF_ENA;
+ }
+ else {
+ RcReg &= ~GM_RXCR_MCF_ENA;
+ }
+ /* setup Receive Control Register */
+ GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg);
+ }
+} /* SkMacHashing*/
+
+
+#ifdef SK_DIAG
+/******************************************************************************
+ *
+ * SkXmSetRxCmd() - Modify the value of the XMAC's Rx Command Register
+ *
+ * Description:
+ * The features
+ * - FCS stripping, SK_STRIP_FCS_ON/OFF
+ * - pad byte stripping, SK_STRIP_PAD_ON/OFF
+ * - don't set XMR_FS_ERR in status SK_LENERR_OK_ON/OFF
+ * for inrange length error frames
+ * - don't set XMR_FS_ERR in status SK_BIG_PK_OK_ON/OFF
+ * for frames > 1514 bytes
+ * - enable Rx of own packets SK_SELF_RX_ON/OFF
+ *
+ * for incoming packets may be enabled/disabled by this function.
+ * Additional modes may be added later.
+ * Multiple modes can be enabled/disabled at the same time.
+ * The new configuration is written to the Rx Command register immediately.
+ *
+ * Returns:
+ * nothing
+ */
+static void SkXmSetRxCmd(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF,
+ SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */
+{
+ SK_U16 OldRxCmd;
+ SK_U16 RxCmd;
+
+ XM_IN16(IoC, Port, XM_RX_CMD, &OldRxCmd);
+
+ RxCmd = OldRxCmd;
+
+ switch (Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) {
+ case SK_STRIP_FCS_ON:
+ RxCmd |= XM_RX_STRIP_FCS;
+ break;
+ case SK_STRIP_FCS_OFF:
+ RxCmd &= ~XM_RX_STRIP_FCS;
+ break;
+ }
+
+ switch (Mode & (SK_STRIP_PAD_ON | SK_STRIP_PAD_OFF)) {
+ case SK_STRIP_PAD_ON:
+ RxCmd |= XM_RX_STRIP_PAD;
+ break;
+ case SK_STRIP_PAD_OFF:
+ RxCmd &= ~XM_RX_STRIP_PAD;
+ break;
+ }
+
+ switch (Mode & (SK_LENERR_OK_ON | SK_LENERR_OK_OFF)) {
+ case SK_LENERR_OK_ON:
+ RxCmd |= XM_RX_LENERR_OK;
+ break;
+ case SK_LENERR_OK_OFF:
+ RxCmd &= ~XM_RX_LENERR_OK;
+ break;
+ }
+
+ switch (Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) {
+ case SK_BIG_PK_OK_ON:
+ RxCmd |= XM_RX_BIG_PK_OK;
+ break;
+ case SK_BIG_PK_OK_OFF:
+ RxCmd &= ~XM_RX_BIG_PK_OK;
+ break;
+ }
+
+ switch (Mode & (SK_SELF_RX_ON | SK_SELF_RX_OFF)) {
+ case SK_SELF_RX_ON:
+ RxCmd |= XM_RX_SELF_RX;
+ break;
+ case SK_SELF_RX_OFF:
+ RxCmd &= ~XM_RX_SELF_RX;
+ break;
+ }
+
+ /* Write the new mode to the Rx command register if required */
+ if (OldRxCmd != RxCmd) {
+ XM_OUT16(IoC, Port, XM_RX_CMD, RxCmd);
+ }
+} /* SkXmSetRxCmd */
+
+
+/******************************************************************************
+ *
+ * SkGmSetRxCmd() - Modify the value of the GMAC's Rx Control Register
+ *
+ * Description:
+ * The features
+ * - FCS (CRC) stripping, SK_STRIP_FCS_ON/OFF
+ * - don't set GMR_FS_LONG_ERR SK_BIG_PK_OK_ON/OFF
+ * for frames > 1514 bytes
+ * - enable Rx of own packets SK_SELF_RX_ON/OFF
+ *
+ * for incoming packets may be enabled/disabled by this function.
+ * Additional modes may be added later.
+ * Multiple modes can be enabled/disabled at the same time.
+ * The new configuration is written to the Rx Command register immediately.
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGmSetRxCmd(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF,
+ SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */
+{
+ SK_U16 OldRxCmd;
+ SK_U16 RxCmd;
+
+ if ((Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) != 0) {
+
+ GM_IN16(IoC, Port, GM_RX_CTRL, &OldRxCmd);
+
+ RxCmd = OldRxCmd;
+
+ if ((Mode & SK_STRIP_FCS_ON) != 0) {
+ RxCmd |= GM_RXCR_CRC_DIS;
+ }
+ else {
+ RxCmd &= ~GM_RXCR_CRC_DIS;
+ }
+ /* Write the new mode to the Rx control register if required */
+ if (OldRxCmd != RxCmd) {
+ GM_OUT16(IoC, Port, GM_RX_CTRL, RxCmd);
+ }
+ }
+
+ if ((Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) != 0) {
+
+ GM_IN16(IoC, Port, GM_SERIAL_MODE, &OldRxCmd);
+
+ RxCmd = OldRxCmd;
+
+ if ((Mode & SK_BIG_PK_OK_ON) != 0) {
+ RxCmd |= GM_SMOD_JUMBO_ENA;
+ }
+ else {
+ RxCmd &= ~GM_SMOD_JUMBO_ENA;
+ }
+ /* Write the new mode to the Rx control register if required */
+ if (OldRxCmd != RxCmd) {
+ GM_OUT16(IoC, Port, GM_SERIAL_MODE, RxCmd);
+ }
+ }
+} /* SkGmSetRxCmd */
+
+
+/******************************************************************************
+ *
+ * SkMacSetRxCmd() - Modify the value of the MAC's Rx Control Register
+ *
+ * Description: modifies the MAC's Rx Control reg. dep. on board type
+ *
+ * Returns:
+ * nothing
+ */
+void SkMacSetRxCmd(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+int Mode) /* Rx Mode */
+{
+ if (pAC->GIni.GIGenesis) {
+
+ SkXmSetRxCmd(pAC, IoC, Port, Mode);
+ }
+ else {
+
+ SkGmSetRxCmd(pAC, IoC, Port, Mode);
+ }
+} /* SkMacSetRxCmd */
+
+
+/******************************************************************************
+ *
+ * SkMacCrcGener() - Enable / Disable CRC Generation
+ *
+ * Description: enables / disables CRC generation dep. on board type
+ *
+ * Returns:
+ * nothing
+ */
+void SkMacCrcGener(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL Enable) /* Enable / Disable */
+{
+ SK_U16 Word;
+
+ if (pAC->GIni.GIGenesis) {
+
+ XM_IN16(IoC, Port, XM_TX_CMD, &Word);
+
+ if (Enable) {
+ Word &= ~XM_TX_NO_CRC;
+ }
+ else {
+ Word |= XM_TX_NO_CRC;
+ }
+ /* setup Tx Command Register */
+ XM_OUT16(pAC, Port, XM_TX_CMD, Word);
+ }
+ else {
+
+ GM_IN16(IoC, Port, GM_TX_CTRL, &Word);
+
+ if (Enable) {
+ Word &= ~GM_TXCR_CRC_DIS;
+ }
+ else {
+ Word |= GM_TXCR_CRC_DIS;
+ }
+ /* setup Tx Control Register */
+ GM_OUT16(IoC, Port, GM_TX_CTRL, Word);
+ }
+} /* SkMacCrcGener*/
+
+#endif /* SK_DIAG */
+
+
+/******************************************************************************
+ *
+ * SkXmClrExactAddr() - Clear Exact Match Address Registers
+ *
+ * Description:
+ * All Exact Match Address registers of the XMAC 'Port' will be
+ * cleared starting with 'StartNum' up to (and including) the
+ * Exact Match address number of 'StopNum'.
+ *
+ * Returns:
+ * nothing
+ */
+void SkXmClrExactAddr(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+int StartNum, /* Begin with this Address Register Index (0..15) */
+int StopNum) /* Stop after finished with this Register Idx (0..15) */
+{
+ int i;
+ SK_U16 ZeroAddr[3] = {0x0000, 0x0000, 0x0000};
+
+ if ((unsigned)StartNum > 15 || (unsigned)StopNum > 15 ||
+ StartNum > StopNum) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E001, SKERR_HWI_E001MSG);
+ return;
+ }
+
+ for (i = StartNum; i <= StopNum; i++) {
+ XM_OUTADDR(IoC, Port, XM_EXM(i), &ZeroAddr[0]);
+ }
+} /* SkXmClrExactAddr */
+
+
+/******************************************************************************
+ *
+ * SkMacFlushTxFifo() - Flush the MAC's transmit FIFO
+ *
+ * Description:
+ * Flush the transmit FIFO of the MAC specified by the index 'Port'
+ *
+ * Returns:
+ * nothing
+ */
+void SkMacFlushTxFifo(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_U32 MdReg;
+
+ if (pAC->GIni.GIGenesis) {
+
+ XM_IN32(IoC, Port, XM_MODE, &MdReg);
+
+ XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FTF);
+ }
+ else {
+ /* no way to flush the FIFO we have to issue a reset */
+ /* TBD */
+ }
+} /* SkMacFlushTxFifo */
+
+
+/******************************************************************************
+ *
+ * SkMacFlushRxFifo() - Flush the MAC's receive FIFO
+ *
+ * Description:
+ * Flush the receive FIFO of the MAC specified by the index 'Port'
+ *
+ * Returns:
+ * nothing
+ */
+void SkMacFlushRxFifo(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_U32 MdReg;
+
+ if (pAC->GIni.GIGenesis) {
+
+ XM_IN32(IoC, Port, XM_MODE, &MdReg);
+
+ XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FRF);
+ }
+ else {
+ /* no way to flush the FIFO we have to issue a reset */
+ /* TBD */
+ }
+} /* SkMacFlushRxFifo */
+
+
+/******************************************************************************
+ *
+ * SkXmSoftRst() - Do a XMAC software reset
+ *
+ * Description:
+ * The PHY registers should not be destroyed during this
+ * kind of software reset. Therefore the XMAC Software Reset
+ * (XM_GP_RES_MAC bit in XM_GP_PORT) must not be used!
+ *
+ * The software reset is done by
+ * - disabling the Rx and Tx state machine,
+ * - resetting the statistics module,
+ * - clear all other significant XMAC Mode,
+ * Command, and Control Registers
+ * - clearing the Hash Register and the
+ * Exact Match Address registers, and
+ * - flushing the XMAC's Rx and Tx FIFOs.
+ *
+ * Note:
+ * Another requirement when stopping the XMAC is to
+ * avoid sending corrupted frames on the network.
+ * Disabling the Tx state machine will NOT interrupt
+ * the currently transmitted frame. But we must take care
+ * that the Tx FIFO is cleared AFTER the current frame
+ * is complete sent to the network.
+ *
+ * It takes about 12ns to send a frame with 1538 bytes.
+ * One PCI clock goes at least 15ns (66MHz). Therefore
+ * after reading XM_GP_PORT back, we are sure that the
+ * transmitter is disabled AND idle. And this means
+ * we may flush the transmit FIFO now.
+ *
+ * Returns:
+ * nothing
+ */
+static void SkXmSoftRst(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_U16 ZeroAddr[4] = {0x0000, 0x0000, 0x0000, 0x0000};
+
+ /* reset the statistics module */
+ XM_OUT32(IoC, Port, XM_GP_PORT, XM_GP_RES_STAT);
+
+ /* disable all XMAC IRQs */
+ XM_OUT16(IoC, Port, XM_IMSK, 0xffff);
+
+ XM_OUT32(IoC, Port, XM_MODE, 0); /* clear Mode Reg */
+
+ XM_OUT16(IoC, Port, XM_TX_CMD, 0); /* reset TX CMD Reg */
+ XM_OUT16(IoC, Port, XM_RX_CMD, 0); /* reset RX CMD Reg */
+
+ /* disable all PHY IRQs */
+ switch (pAC->GIni.GP[Port].PhyType) {
+ case SK_PHY_BCOM:
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff);
+ break;
+#ifdef OTHER_PHY
+ case SK_PHY_LONE:
+ SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0);
+ break;
+ case SK_PHY_NAT:
+ /* todo: National
+ SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */
+ break;
+#endif /* OTHER_PHY */
+ }
+
+ /* clear the Hash Register */
+ XM_OUTHASH(IoC, Port, XM_HSM, &ZeroAddr);
+
+ /* clear the Exact Match Address registers */
+ SkXmClrExactAddr(pAC, IoC, Port, 0, 15);
+
+ /* clear the Source Check Address registers */
+ XM_OUTHASH(IoC, Port, XM_SRC_CHK, &ZeroAddr);
+
+} /* SkXmSoftRst */
+
+
+/******************************************************************************
+ *
+ * SkXmHardRst() - Do a XMAC hardware reset
+ *
+ * Description:
+ * The XMAC of the specified 'Port' and all connected devices
+ * (PHY and SERDES) will receive a reset signal on its *Reset pins.
+ * External PHYs must be reset be clearing a bit in the GPIO register
+ * (Timing requirements: Broadcom: 400ns, Level One: none, National: 80ns).
+ *
+ * ATTENTION:
+ * It is absolutely necessary to reset the SW_RST Bit first
+ * before calling this function.
+ *
+ * Returns:
+ * nothing
+ */
+static void SkXmHardRst(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_U32 Reg;
+ int i;
+ int TOut;
+ SK_U16 Word;
+
+ for (i = 0; i < 4; i++) {
+ /* TX_MFF_CTRL1 has 32 bits, but only the lowest 16 bits are used */
+ SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
+
+ TOut = 0;
+ do {
+ if (TOut++ > 10000) {
+ /*
+ * Adapter seems to be in RESET state.
+ * Registers cannot be written.
+ */
+ return;
+ }
+
+ SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_SET_MAC_RST);
+
+ SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &Word);
+
+ } while ((Word & MFF_SET_MAC_RST) == 0);
+ }
+
+ /* For external PHYs there must be special handling */
+ if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) {
+ /* reset external PHY */
+ SK_IN32(IoC, B2_GP_IO, &Reg);
+ if (Port == 0) {
+ Reg |= GP_DIR_0; /* set to output */
+ Reg &= ~GP_IO_0;
+ }
+ else {
+ Reg |= GP_DIR_2; /* set to output */
+ Reg &= ~GP_IO_2;
+ }
+ SK_OUT32(IoC, B2_GP_IO, Reg);
+
+ /* short delay */
+ SK_IN32(IoC, B2_GP_IO, &Reg);
+ }
+
+} /* SkXmHardRst */
+
+
+/******************************************************************************
+ *
+ * SkGmSoftRst() - Do a GMAC software reset
+ *
+ * Description:
+ * The GPHY registers should not be destroyed during this
+ * kind of software reset.
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGmSoftRst(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_U16 EmptyHash[4] = {0x0000, 0x0000, 0x0000, 0x0000};
+ SK_U16 RxCtrl;
+
+ /* reset the statistics module */
+
+ /* disable all GMAC IRQs */
+ SK_OUT8(IoC, GMAC_IRQ_MSK, 0);
+
+ /* disable all PHY IRQs */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0);
+
+ /* clear the Hash Register */
+ GM_OUTHASH(IoC, Port, GM_MC_ADDR_H1, EmptyHash);
+
+ /* Enable Unicast and Multicast filtering */
+ GM_IN16(IoC, Port, GM_RX_CTRL, &RxCtrl);
+
+ GM_OUT16(IoC, Port, GM_RX_CTRL,
+ RxCtrl | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
+
+} /* SkGmSoftRst */
+
+
+/******************************************************************************
+ *
+ * SkGmHardRst() - Do a GMAC hardware reset
+ *
+ * Description:
+ *
+ * ATTENTION:
+ * It is absolutely necessary to reset the SW_RST Bit first
+ * before calling this function.
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGmHardRst(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ /* set GPHY Control reset */
+ SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), GPC_RST_SET);
+
+ /* set GMAC Control reset */
+ SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET);
+
+} /* SkGmHardRst */
+
+
+/******************************************************************************
+ *
+ * SkMacSoftRst() - Do a MAC software reset
+ *
+ * Description: calls a MAC software reset routine dep. on board type
+ *
+ * Returns:
+ * nothing
+ */
+void SkMacSoftRst(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* disable receiver and transmitter */
+ SkMacRxTxDisable(pAC, IoC, Port);
+
+ if (pAC->GIni.GIGenesis) {
+
+ SkXmSoftRst(pAC, IoC, Port);
+ }
+ else {
+
+ SkGmSoftRst(pAC, IoC, Port);
+ }
+
+ /* flush the MAC's Rx and Tx FIFOs */
+ SkMacFlushTxFifo(pAC, IoC, Port);
+
+ SkMacFlushRxFifo(pAC, IoC, Port);
+
+ pPrt->PState = SK_PRT_STOP;
+
+} /* SkMacSoftRst */
+
+
+/******************************************************************************
+ *
+ * SkMacHardRst() - Do a MAC hardware reset
+ *
+ * Description: calls a MAC hardware reset routine dep. on board type
+ *
+ * Returns:
+ * nothing
+ */
+void SkMacHardRst(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+
+ if (pAC->GIni.GIGenesis) {
+
+ SkXmHardRst(pAC, IoC, Port);
+ }
+ else {
+
+ SkGmHardRst(pAC, IoC, Port);
+ }
+
+ pAC->GIni.GP[Port].PState = SK_PRT_RESET;
+
+} /* SkMacHardRst */
+
+
+/******************************************************************************
+ *
+ * SkXmInitMac() - Initialize the XMAC II
+ *
+ * Description:
+ * Initialize the XMAC of the specified port.
+ * The XMAC must be reset or stopped before calling this function.
+ *
+ * Note:
+ * The XMAC's Rx and Tx state machine is still disabled when returning.
+ *
+ * Returns:
+ * nothing
+ */
+void SkXmInitMac(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_U32 Reg;
+ int i;
+ SK_U16 SWord;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (pPrt->PState == SK_PRT_STOP) {
+ /* Port State: SK_PRT_STOP */
+ /* Verify that the reset bit is cleared */
+ SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &SWord);
+
+ if ((SWord & MFF_SET_MAC_RST) != 0) {
+ /* PState does not match HW state */
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG);
+ /* Correct it */
+ pPrt->PState = SK_PRT_RESET;
+ }
+ }
+
+ if (pPrt->PState == SK_PRT_RESET) {
+ /*
+ * clear HW reset
+ * Note: The SW reset is self clearing, therefore there is
+ * nothing to do here.
+ */
+ SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
+
+ /* Ensure that XMAC reset release is done (errata from LReinbold?) */
+ SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &SWord);
+
+ /* Clear PHY reset */
+ if (pPrt->PhyType != SK_PHY_XMAC) {
+
+ SK_IN32(IoC, B2_GP_IO, &Reg);
+
+ if (Port == 0) {
+ Reg |= (GP_DIR_0 | GP_IO_0); /* set to output */
+ }
+ else {
+ Reg |= (GP_DIR_2 | GP_IO_2); /* set to output */
+ }
+ SK_OUT32(IoC, B2_GP_IO, Reg);
+
+ /* Enable GMII interface */
+ XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_GMII_MD);
+
+ /* read Id from external PHY (all have the same address) */
+ SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_ID1, &pPrt->PhyId1);
+
+ /*
+ * Optimize MDIO transfer by suppressing preamble.
+ * Must be done AFTER first access to BCOM chip.
+ */
+ XM_IN16(IoC, Port, XM_MMU_CMD, &SWord);
+
+ XM_OUT16(IoC, Port, XM_MMU_CMD, SWord | XM_MMU_NO_PRE);
+
+ if (pPrt->PhyId1 == PHY_BCOM_ID1_C0) {
+ /*
+ * Workaround BCOM Errata for the C0 type.
+ * Write magic patterns to reserved registers.
+ */
+ i = 0;
+ while (BcomRegC0Hack[i].PhyReg != 0) {
+ SkXmPhyWrite(pAC, IoC, Port, BcomRegC0Hack[i].PhyReg,
+ BcomRegC0Hack[i].PhyVal);
+ i++;
+ }
+ }
+ else if (pPrt->PhyId1 == PHY_BCOM_ID1_A1) {
+ /*
+ * Workaround BCOM Errata for the A1 type.
+ * Write magic patterns to reserved registers.
+ */
+ i = 0;
+ while (BcomRegA1Hack[i].PhyReg != 0) {
+ SkXmPhyWrite(pAC, IoC, Port, BcomRegA1Hack[i].PhyReg,
+ BcomRegA1Hack[i].PhyVal);
+ i++;
+ }
+ }
+
+ /*
+ * Workaround BCOM Errata (#10523) for all BCom PHYs.
+ * Disable Power Management after reset.
+ */
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord);
+
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL,
+ (SK_U16)(SWord | PHY_B_AC_DIS_PM));
+
+ /* PHY LED initialization is done in SkGeXmitLED() */
+ }
+
+ /* Dummy read the Interrupt source register */
+ XM_IN16(IoC, Port, XM_ISRC, &SWord);
+
+ /*
+ * The auto-negotiation process starts immediately after
+ * clearing the reset. The auto-negotiation process should be
+ * started by the SIRQ, therefore stop it here immediately.
+ */
+ SkMacInitPhy(pAC, IoC, Port, SK_FALSE);
+
+#if 0
+ /* temp. code: enable signal detect */
+ /* WARNING: do not override GMII setting above */
+ XM_OUT16(pAC, Port, XM_HW_CFG, XM_HW_COM4SIG);
+#endif
+ }
+
+ /*
+ * configure the XMACs Station Address
+ * B2_MAC_2 = xx xx xx xx xx x1 is programmed to XMAC A
+ * B2_MAC_3 = xx xx xx xx xx x2 is programmed to XMAC B
+ */
+ for (i = 0; i < 3; i++) {
+ /*
+ * The following 2 statements are together endianess
+ * independent. Remember this when changing.
+ */
+ SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord);
+
+ XM_OUT16(IoC, Port, (XM_SA + i * 2), SWord);
+ }
+
+ /* Tx Inter Packet Gap (XM_TX_IPG): use default */
+ /* Tx High Water Mark (XM_TX_HI_WM): use default */
+ /* Tx Low Water Mark (XM_TX_LO_WM): use default */
+ /* Host Request Threshold (XM_HT_THR): use default */
+ /* Rx Request Threshold (XM_RX_THR): use default */
+ /* Rx Low Water Mark (XM_RX_LO_WM): use default */
+
+ /* configure Rx High Water Mark (XM_RX_HI_WM) */
+ XM_OUT16(IoC, Port, XM_RX_HI_WM, SK_XM_RX_HI_WM);
+
+ /* Configure Tx Request Threshold */
+ SWord = SK_XM_THR_SL; /* for single port */
+
+ if (pAC->GIni.GIMacsFound > 1) {
+ switch (pAC->GIni.GIPortUsage) {
+ case SK_RED_LINK:
+ SWord = SK_XM_THR_REDL; /* redundant link */
+ break;
+ case SK_MUL_LINK:
+ SWord = SK_XM_THR_MULL; /* load balancing */
+ break;
+ case SK_JUMBO_LINK:
+ SWord = SK_XM_THR_JUMBO; /* jumbo frames */
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E014, SKERR_HWI_E014MSG);
+ break;
+ }
+ }
+ XM_OUT16(IoC, Port, XM_TX_THR, SWord);
+
+ /* setup register defaults for the Tx Command Register */
+ XM_OUT16(IoC, Port, XM_TX_CMD, XM_TX_AUTO_PAD);
+
+ /* setup register defaults for the Rx Command Register */
+ SWord = XM_RX_STRIP_FCS | XM_RX_LENERR_OK;
+
+ if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
+ SWord |= XM_RX_BIG_PK_OK;
+ }
+
+ if (pPrt->PLinkModeConf == SK_LMODE_HALF) {
+ /*
+ * If in manual half duplex mode the other side might be in
+ * full duplex mode, so ignore if a carrier extension is not seen
+ * on frames received
+ */
+ SWord |= XM_RX_DIS_CEXT;
+ }
+
+ XM_OUT16(IoC, Port, XM_RX_CMD, SWord);
+
+ /*
+ * setup register defaults for the Mode Register
+ * - Don't strip error frames to avoid Store & Forward
+ * on the Rx side.
+ * - Enable 'Check Station Address' bit
+ * - Enable 'Check Address Array' bit
+ */
+ XM_OUT32(IoC, Port, XM_MODE, XM_DEF_MODE);
+
+ /*
+ * Initialize the Receive Counter Event Mask (XM_RX_EV_MSK)
+ * - Enable all bits excepting 'Octets Rx OK Low CntOv'
+ * and 'Octets Rx OK Hi Cnt Ov'.
+ */
+ XM_OUT32(IoC, Port, XM_RX_EV_MSK, XMR_DEF_MSK);
+
+ /*
+ * Initialize the Transmit Counter Event Mask (XM_TX_EV_MSK)
+ * - Enable all bits excepting 'Octets Tx OK Low CntOv'
+ * and 'Octets Tx OK Hi Cnt Ov'.
+ */
+ XM_OUT32(IoC, Port, XM_TX_EV_MSK, XMT_DEF_MSK);
+
+ /*
+ * Do NOT init XMAC interrupt mask here.
+ * All interrupts remain disable until link comes up!
+ */
+
+ /*
+ * Any additional configuration changes may be done now.
+ * The last action is to enable the Rx and Tx state machine.
+ * This should be done after the auto-negotiation process
+ * has been completed successfully.
+ */
+} /* SkXmInitMac */
+
+/******************************************************************************
+ *
+ * SkGmInitMac() - Initialize the GMAC
+ *
+ * Description:
+ * Initialize the GMAC of the specified port.
+ * The GMAC must be reset or stopped before calling this function.
+ *
+ * Note:
+ * The GMAC's Rx and Tx state machine is still disabled when returning.
+ *
+ * Returns:
+ * nothing
+ */
+void SkGmInitMac(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ int i;
+ SK_U16 SWord;
+ SK_U32 DWord;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (pPrt->PState == SK_PRT_STOP) {
+ /* Port State: SK_PRT_STOP */
+ /* Verify that the reset bit is cleared */
+ SK_IN32(IoC, MR_ADDR(Port, GMAC_CTRL), &DWord);
+
+ if ((DWord & GMC_RST_SET) != 0) {
+ /* PState does not match HW state */
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG);
+ /* Correct it */
+ pPrt->PState = SK_PRT_RESET;
+ }
+ }
+
+ if (pPrt->PState == SK_PRT_RESET) {
+ /* set GPHY Control reset */
+ SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), GPC_RST_SET);
+
+ /* set GMAC Control reset */
+ SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET);
+
+ /* clear GMAC Control reset */
+ SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_CLR);
+
+ /* set GMAC Control reset */
+ SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET);
+
+ /* set HWCFG_MODE */
+ DWord = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP |
+ GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE |
+ (pAC->GIni.GICopperType ? GPC_HWCFG_GMII_COP :
+ GPC_HWCFG_GMII_FIB);
+
+ /* set GPHY Control reset */
+ SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_SET);
+
+ /* release GPHY Control reset */
+ SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_CLR);
+
+ /* clear GMAC Control reset */
+ SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR);
+
+ /* Dummy read the Interrupt source register */
+ SK_IN16(IoC, GMAC_IRQ_SRC, &SWord);
+
+#ifndef VCPU
+ /* read Id from PHY */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_ID1, &pPrt->PhyId1);
+
+ SkGmInitPhyMarv(pAC, IoC, Port, SK_FALSE);
+#endif /* VCPU */
+ }
+
+ (void)SkGmResetCounter(pAC, IoC, Port);
+
+ SWord = 0;
+
+ /* speed settings */
+ switch (pPrt->PLinkSpeed) {
+ case SK_LSPEED_AUTO:
+ case SK_LSPEED_1000MBPS:
+ SWord |= GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100;
+ break;
+ case SK_LSPEED_100MBPS:
+ SWord |= GM_GPCR_SPEED_100;
+ break;
+ case SK_LSPEED_10MBPS:
+ break;
+ }
+
+ /* duplex settings */
+ if (pPrt->PLinkMode != SK_LMODE_HALF) {
+ /* set full duplex */
+ SWord |= GM_GPCR_DUP_FULL;
+ }
+
+ /* flow control settings */
+ switch (pPrt->PFlowCtrlMode) {
+ case SK_FLOW_MODE_NONE:
+ /* disable auto-negotiation for flow-control */
+ SWord |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS;
+ break;
+ case SK_FLOW_MODE_LOC_SEND:
+ SWord |= GM_GPCR_FC_RX_DIS;
+ break;
+ case SK_FLOW_MODE_SYMMETRIC:
+ /* TBD */
+ case SK_FLOW_MODE_SYM_OR_REM:
+ /* enable auto-negotiation for flow-control and */
+ /* enable Rx and Tx of pause frames */
+ break;
+ }
+
+ /* Auto-negotiation ? */
+ if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+ /* disable auto-update for speed, duplex and flow-control */
+ SWord |= GM_GPCR_AU_ALL_DIS;
+ }
+
+ /* setup General Purpose Control Register */
+ GM_OUT16(IoC, Port, GM_GP_CTRL, SWord);
+
+ /* setup Transmit Control Register */
+ GM_OUT16(IoC, Port, GM_TX_CTRL, GM_TXCR_COL_THR);
+
+ /* setup Receive Control Register */
+ GM_OUT16(IoC, Port, GM_RX_CTRL, GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA |
+ GM_RXCR_CRC_DIS);
+
+ /* setup Transmit Flow Control Register */
+ GM_OUT16(IoC, Port, GM_TX_FLOW_CTRL, 0xffff);
+
+ /* setup Transmit Parameter Register */
+#ifdef VCPU
+ GM_IN16(IoC, Port, GM_TX_PARAM, &SWord);
+#endif /* VCPU */
+
+ SWord = JAM_LEN_VAL(3) | JAM_IPG_VAL(11) | IPG_JAM_DATA(26);
+
+ GM_OUT16(IoC, Port, GM_TX_PARAM, SWord);
+
+ /* configure the Serial Mode Register */
+#ifdef VCPU
+ GM_IN16(IoC, Port, GM_SERIAL_MODE, &SWord);
+#endif /* VCPU */
+
+ SWord = GM_SMOD_VLAN_ENA | IPG_VAL_FAST_ETH;
+
+ if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
+ /* enable jumbo mode (Max. Frame Length = 9018) */
+ SWord |= GM_SMOD_JUMBO_ENA;
+ }
+
+ GM_OUT16(IoC, Port, GM_SERIAL_MODE, SWord);
+
+ /*
+ * configure the GMACs Station Addresses
+ * in PROM you can find our addresses at:
+ * B2_MAC_1 = xx xx xx xx xx x0 virtual address
+ * B2_MAC_2 = xx xx xx xx xx x1 is programmed to GMAC A
+ * B2_MAC_3 = xx xx xx xx xx x2 is reserved for DualPort
+ */
+
+ for (i = 0; i < 3; i++) {
+ /*
+ * The following 2 statements are together endianess
+ * independent. Remember this when changing.
+ */
+ /* physical address: will be used for pause frames */
+ SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord);
+
+#ifdef WA_DEV_16
+ /* WA for deviation #16 */
+ if (pAC->GIni.GIChipRev == 0) {
+ /* swap the address bytes */
+ SWord = ((SWord & 0xff00) >> 8) | ((SWord & 0x00ff) << 8);
+
+ /* write to register in reversed order */
+ GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + (2 - i) * 4), SWord);
+ }
+ else {
+ GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord);
+ }
+#else
+ GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord);
+#endif /* WA_DEV_16 */
+
+ /* virtual address: will be used for data */
+ SK_IN16(IoC, (B2_MAC_1 + Port * 8 + i * 2), &SWord);
+
+ GM_OUT16(IoC, Port, (GM_SRC_ADDR_2L + i * 4), SWord);
+
+ /* reset Multicast filtering Hash registers 1-3 */
+ GM_OUT16(IoC, Port, GM_MC_ADDR_H1 + 4*i, 0);
+ }
+
+ /* reset Multicast filtering Hash register 4 */
+ GM_OUT16(IoC, Port, GM_MC_ADDR_H4, 0);
+
+ /* enable interrupt mask for counter overflows */
+ GM_OUT16(IoC, Port, GM_TX_IRQ_MSK, 0);
+ GM_OUT16(IoC, Port, GM_RX_IRQ_MSK, 0);
+ GM_OUT16(IoC, Port, GM_TR_IRQ_MSK, 0);
+
+ /* read General Purpose Status */
+ GM_IN16(IoC, Port, GM_GP_STAT, &SWord);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("MAC Stat Reg=0x%04X\n", SWord));
+
+#ifdef SK_DIAG
+ c_print("MAC Stat Reg=0x%04X\n", SWord);
+#endif /* SK_DIAG */
+
+} /* SkGmInitMac */
+
+
+/******************************************************************************
+ *
+ * SkXmInitDupMd() - Initialize the XMACs Duplex Mode
+ *
+ * Description:
+ * This function initializes the XMACs Duplex Mode.
+ * It should be called after successfully finishing
+ * the Auto-negotiation Process
+ *
+ * Returns:
+ * nothing
+ */
+void SkXmInitDupMd(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ switch (pAC->GIni.GP[Port].PLinkModeStatus) {
+ case SK_LMODE_STAT_AUTOHALF:
+ case SK_LMODE_STAT_HALF:
+ /* Configuration Actions for Half Duplex Mode */
+ /*
+ * XM_BURST = default value. We are probable not quick
+ * enough at the 'XMAC' bus to burst 8kB.
+ * The XMAC stops bursting if no transmit frames
+ * are available or the burst limit is exceeded.
+ */
+ /* XM_TX_RT_LIM = default value (15) */
+ /* XM_TX_STIME = default value (0xff = 4096 bit times) */
+ break;
+ case SK_LMODE_STAT_AUTOFULL:
+ case SK_LMODE_STAT_FULL:
+ /* Configuration Actions for Full Duplex Mode */
+ /*
+ * The duplex mode is configured by the PHY,
+ * therefore it seems to be that there is nothing
+ * to do here.
+ */
+ break;
+ case SK_LMODE_STAT_UNKNOWN:
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E007, SKERR_HWI_E007MSG);
+ break;
+ }
+} /* SkXmInitDupMd */
+
+
+/******************************************************************************
+ *
+ * SkXmInitPauseMd() - initialize the Pause Mode to be used for this port
+ *
+ * Description:
+ * This function initializes the Pause Mode which should
+ * be used for this port.
+ * It should be called after successfully finishing
+ * the Auto-negotiation Process
+ *
+ * Returns:
+ * nothing
+ */
+void SkXmInitPauseMd(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_U32 DWord;
+ SK_U16 Word;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
+
+ if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_NONE ||
+ pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) {
+
+ /* Disable Pause Frame Reception */
+ Word |= XM_MMU_IGN_PF;
+ }
+ else {
+ /*
+ * enabling pause frame reception is required for 1000BT
+ * because the XMAC is not reset if the link is going down
+ */
+ /* Enable Pause Frame Reception */
+ Word &= ~XM_MMU_IGN_PF;
+ }
+
+ XM_OUT16(IoC, Port, XM_MMU_CMD, Word);
+
+ XM_IN32(IoC, Port, XM_MODE, &DWord);
+
+ if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_SYMMETRIC ||
+ pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) {
+
+ /*
+ * Configure Pause Frame Generation
+ * Use internal and external Pause Frame Generation.
+ * Sending pause frames is edge triggered.
+ * Send a Pause frame with the maximum pause time if
+ * internal oder external FIFO full condition occurs.
+ * Send a zero pause time frame to re-start transmission.
+ */
+
+ /* XM_PAUSE_DA = '010000C28001' (default) */
+
+ /* XM_MAC_PTIME = 0xffff (maximum) */
+ /* remember this value is defined in big endian (!) */
+ XM_OUT16(IoC, Port, XM_MAC_PTIME, 0xffff);
+
+ /* Set Pause Mode in Mode Register */
+ DWord |= XM_PAUSE_MODE;
+
+ /* Set Pause Mode in MAC Rx FIFO */
+ SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_PAUSE);
+ }
+ else {
+ /*
+ * disable pause frame generation is required for 1000BT
+ * because the XMAC is not reset if the link is going down
+ */
+ /* Disable Pause Mode in Mode Register */
+ DWord &= ~XM_PAUSE_MODE;
+
+ /* Disable Pause Mode in MAC Rx FIFO */
+ SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_DIS_PAUSE);
+ }
+
+ XM_OUT32(IoC, Port, XM_MODE, DWord);
+} /* SkXmInitPauseMd*/
+
+
+/******************************************************************************
+ *
+ * SkXmInitPhyXmac() - Initialize the XMAC Phy registers
+ *
+ * Description: initializes all the XMACs Phy registers
+ *
+ * Note:
+ *
+ * Returns:
+ * nothing
+ */
+static void SkXmInitPhyXmac(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */
+{
+ SK_GEPORT *pPrt;
+ SK_U16 Ctrl;
+
+ pPrt = &pAC->GIni.GP[Port];
+ Ctrl = 0;
+
+ /* Auto-negotiation ? */
+ if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("InitPhyXmac: no auto-negotiation Port %d\n", Port));
+ /* Set DuplexMode in Config register */
+ if (pPrt->PLinkMode == SK_LMODE_FULL) {
+ Ctrl |= PHY_CT_DUP_MD;
+ }
+
+ /*
+ * Do NOT enable Auto-negotiation here. This would hold
+ * the link down because no IDLEs are transmitted
+ */
+ }
+ else {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("InitPhyXmac: with auto-negotiation Port %d\n", Port));
+ /* Set Auto-negotiation advertisement */
+
+ /* Set Full/half duplex capabilities */
+ switch (pPrt->PLinkMode) {
+ case SK_LMODE_AUTOHALF:
+ Ctrl |= PHY_X_AN_HD;
+ break;
+ case SK_LMODE_AUTOFULL:
+ Ctrl |= PHY_X_AN_FD;
+ break;
+ case SK_LMODE_AUTOBOTH:
+ Ctrl |= PHY_X_AN_FD | PHY_X_AN_HD;
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
+ SKERR_HWI_E015MSG);
+ }
+
+ switch (pPrt->PFlowCtrlMode) {
+ case SK_FLOW_MODE_NONE:
+ Ctrl |= PHY_X_P_NO_PAUSE;
+ break;
+ case SK_FLOW_MODE_LOC_SEND:
+ Ctrl |= PHY_X_P_ASYM_MD;
+ break;
+ case SK_FLOW_MODE_SYMMETRIC:
+ Ctrl |= PHY_X_P_SYM_MD;
+ break;
+ case SK_FLOW_MODE_SYM_OR_REM:
+ Ctrl |= PHY_X_P_BOTH_MD;
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
+ SKERR_HWI_E016MSG);
+ }
+
+ /* Write AutoNeg Advertisement Register */
+ SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_AUNE_ADV, Ctrl);
+
+ /* Restart Auto-negotiation */
+ Ctrl = PHY_CT_ANE | PHY_CT_RE_CFG;
+ }
+
+ if (DoLoop) {
+ /* Set the Phy Loopback bit, too */
+ Ctrl |= PHY_CT_LOOP;
+ }
+
+ /* Write to the Phy control register */
+ SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_CTRL, Ctrl);
+} /* SkXmInitPhyXmac */
+
+
+/******************************************************************************
+ *
+ * SkXmInitPhyBcom() - Initialize the Broadcom Phy registers
+ *
+ * Description: initializes all the Broadcom Phy registers
+ *
+ * Note:
+ *
+ * Returns:
+ * nothing
+ */
+static void SkXmInitPhyBcom(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */
+{
+ SK_GEPORT *pPrt;
+ SK_U16 Ctrl1;
+ SK_U16 Ctrl2;
+ SK_U16 Ctrl3;
+ SK_U16 Ctrl4;
+ SK_U16 Ctrl5;
+
+ Ctrl1 = PHY_CT_SP1000;
+ Ctrl2 = 0;
+ Ctrl3 = PHY_SEL_TYPE;
+ Ctrl4 = PHY_B_PEC_EN_LTR;
+ Ctrl5 = PHY_B_AC_TX_TST;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* manually Master/Slave ? */
+ if (pPrt->PMSMode != SK_MS_MODE_AUTO) {
+ Ctrl2 |= PHY_B_1000C_MSE;
+
+ if (pPrt->PMSMode == SK_MS_MODE_MASTER) {
+ Ctrl2 |= PHY_B_1000C_MSC;
+ }
+ }
+ /* Auto-negotiation ? */
+ if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("InitPhyBcom: no auto-negotiation Port %d\n", Port));
+ /* Set DuplexMode in Config register */
+ Ctrl1 |= (pPrt->PLinkMode == SK_LMODE_FULL ? PHY_CT_DUP_MD : 0);
+
+ /* Determine Master/Slave manually if not already done */
+ if (pPrt->PMSMode == SK_MS_MODE_AUTO) {
+ Ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */
+ }
+
+ /*
+ * Do NOT enable Auto-negotiation here. This would hold
+ * the link down because no IDLES are transmitted
+ */
+ }
+ else {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("InitPhyBcom: with auto-negotiation Port %d\n", Port));
+ /* Set Auto-negotiation advertisement */
+
+ /*
+ * Workaround BCOM Errata #1 for the C5 type.
+ * 1000Base-T Link Acquisition Failure in Slave Mode
+ * Set Repeater/DTE bit 10 of the 1000Base-T Control Register
+ */
+ Ctrl2 |= PHY_B_1000C_RD;
+
+ /* Set Full/half duplex capabilities */
+ switch (pPrt->PLinkMode) {
+ case SK_LMODE_AUTOHALF:
+ Ctrl2 |= PHY_B_1000C_AHD;
+ break;
+ case SK_LMODE_AUTOFULL:
+ Ctrl2 |= PHY_B_1000C_AFD;
+ break;
+ case SK_LMODE_AUTOBOTH:
+ Ctrl2 |= PHY_B_1000C_AFD | PHY_B_1000C_AHD;
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
+ SKERR_HWI_E015MSG);
+ }
+
+ switch (pPrt->PFlowCtrlMode) {
+ case SK_FLOW_MODE_NONE:
+ Ctrl3 |= PHY_B_P_NO_PAUSE;
+ break;
+ case SK_FLOW_MODE_LOC_SEND:
+ Ctrl3 |= PHY_B_P_ASYM_MD;
+ break;
+ case SK_FLOW_MODE_SYMMETRIC:
+ Ctrl3 |= PHY_B_P_SYM_MD;
+ break;
+ case SK_FLOW_MODE_SYM_OR_REM:
+ Ctrl3 |= PHY_B_P_BOTH_MD;
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
+ SKERR_HWI_E016MSG);
+ }
+
+ /* Restart Auto-negotiation */
+ Ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG;
+ }
+
+ /* Initialize LED register here? */
+ /* No. Please do it in SkDgXmitLed() (if required) and swap
+ init order of LEDs and XMAC. (MAl) */
+
+ /* Write 1000Base-T Control Register */
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, Ctrl2);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("1000B-T Ctrl Reg=0x%04X\n", Ctrl2));
+
+ /* Write AutoNeg Advertisement Register */
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, Ctrl3);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Auto-Neg. Adv. Reg=0x%04X\n", Ctrl3));
+
+ if (DoLoop) {
+ /* Set the Phy Loopback bit, too */
+ Ctrl1 |= PHY_CT_LOOP;
+ }
+
+ if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
+ /* configure FIFO to high latency for transmission of ext. packets */
+ Ctrl4 |= PHY_B_PEC_HIGH_LA;
+
+ /* configure reception of extended packets */
+ Ctrl5 |= PHY_B_AC_LONG_PACK;
+
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, Ctrl5);
+ }
+
+ /* Configure LED Traffic Mode and Jumbo Frame usage if specified */
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, Ctrl4);
+
+ /* Write to the Phy control register */
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, Ctrl1);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("PHY Control Reg=0x%04X\n", Ctrl1));
+} /* SkXmInitPhyBcom */
+
+
+/******************************************************************************
+ *
+ * SkGmInitPhyMarv() - Initialize the Marvell Phy registers
+ *
+ * Description: initializes all the Marvell Phy registers
+ *
+ * Note:
+ *
+ * Returns:
+ * nothing
+ */
+static void SkGmInitPhyMarv(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */
+{
+ SK_GEPORT *pPrt;
+ SK_U16 PhyCtrl;
+ SK_U16 C1000BaseT;
+ SK_U16 AutoNegAdv;
+ SK_U16 ExtPhyCtrl;
+ SK_U16 PhyStat;
+ SK_U16 PhyStat1;
+ SK_U16 PhySpecStat;
+ SK_U16 LedCtrl;
+ SK_BOOL AutoNeg;
+
+#ifdef VCPU
+ VCPUprintf(0, "SkGmInitPhyMarv(), Port=%u, DoLoop=%u\n",
+ Port, DoLoop);
+#else /* VCPU */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* Auto-negotiation ? */
+ if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+ AutoNeg = SK_FALSE;
+ }
+ else {
+ AutoNeg = SK_TRUE;
+ }
+
+ if (!DoLoop) {
+ /* Read Ext. PHY Specific Control */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl);
+
+ ExtPhyCtrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
+ PHY_M_EC_MAC_S_MSK);
+
+ ExtPhyCtrl |= PHY_M_EC_M_DSC(1) | PHY_M_EC_S_DSC(1) |
+ PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
+
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL, ExtPhyCtrl);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Ext.PHYCtrl=0x%04X\n", ExtPhyCtrl));
+
+ /* Read PHY Control */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl);
+
+ /* Assert software reset */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL,
+ (SK_U16)(PhyCtrl | PHY_CT_RESET));
+ }
+#endif /* VCPU */
+
+ PhyCtrl = 0 /* PHY_CT_COL_TST */;
+ C1000BaseT = 0;
+ AutoNegAdv = PHY_SEL_TYPE;
+
+ /* manually Master/Slave ? */
+ if (pPrt->PMSMode != SK_MS_MODE_AUTO) {
+ /* enable Manual Master/Slave */
+ C1000BaseT |= PHY_M_1000C_MSE;
+
+ if (pPrt->PMSMode == SK_MS_MODE_MASTER) {
+ C1000BaseT |= PHY_M_1000C_MSC; /* set it to Master */
+ }
+ }
+
+ /* Auto-negotiation ? */
+ if (!AutoNeg) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("InitPhyMarv: no auto-negotiation Port %d\n", Port));
+
+ if (pPrt->PLinkMode == SK_LMODE_FULL) {
+ /* Set Full Duplex Mode */
+ PhyCtrl |= PHY_CT_DUP_MD;
+ }
+
+ /* Set Master/Slave manually if not already done */
+ if (pPrt->PMSMode == SK_MS_MODE_AUTO) {
+ C1000BaseT |= PHY_M_1000C_MSE; /* set it to Slave */
+ }
+
+ /* Set Speed */
+ switch (pPrt->PLinkSpeed) {
+ case SK_LSPEED_AUTO:
+ case SK_LSPEED_1000MBPS:
+ PhyCtrl |= PHY_CT_SP1000;
+ break;
+ case SK_LSPEED_100MBPS:
+ PhyCtrl |= PHY_CT_SP100;
+ break;
+ case SK_LSPEED_10MBPS:
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019,
+ SKERR_HWI_E019MSG);
+ }
+
+ if (!DoLoop) {
+ PhyCtrl |= PHY_CT_RESET;
+ }
+ /*
+ * Do NOT enable Auto-negotiation here. This would hold
+ * the link down because no IDLES are transmitted
+ */
+ }
+ else {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("InitPhyMarv: with auto-negotiation Port %d\n", Port));
+
+ PhyCtrl |= PHY_CT_ANE;
+
+ if (pAC->GIni.GICopperType) {
+ /* Set Speed capabilities */
+ switch (pPrt->PLinkSpeed) {
+ case SK_LSPEED_AUTO:
+ C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD;
+ AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD |
+ PHY_M_AN_10_FD | PHY_M_AN_10_HD;
+ break;
+ case SK_LSPEED_1000MBPS:
+ C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD;
+ break;
+ case SK_LSPEED_100MBPS:
+ AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD |
+ PHY_M_AN_10_FD | PHY_M_AN_10_HD;
+ break;
+ case SK_LSPEED_10MBPS:
+ AutoNegAdv |= PHY_M_AN_10_FD | PHY_M_AN_10_HD;
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019,
+ SKERR_HWI_E019MSG);
+ }
+
+ /* Set Full/half duplex capabilities */
+ switch (pPrt->PLinkMode) {
+ case SK_LMODE_AUTOHALF:
+ C1000BaseT &= ~PHY_M_1000C_AFD;
+ AutoNegAdv &= ~(PHY_M_AN_100_FD | PHY_M_AN_10_FD);
+ break;
+ case SK_LMODE_AUTOFULL:
+ C1000BaseT &= ~PHY_M_1000C_AHD;
+ AutoNegAdv &= ~(PHY_M_AN_100_HD | PHY_M_AN_10_HD);
+ break;
+ case SK_LMODE_AUTOBOTH:
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
+ SKERR_HWI_E015MSG);
+ }
+
+ /* Set Auto-negotiation advertisement */
+ switch (pPrt->PFlowCtrlMode) {
+ case SK_FLOW_MODE_NONE:
+ AutoNegAdv |= PHY_B_P_NO_PAUSE;
+ break;
+ case SK_FLOW_MODE_LOC_SEND:
+ AutoNegAdv |= PHY_B_P_ASYM_MD;
+ break;
+ case SK_FLOW_MODE_SYMMETRIC:
+ AutoNegAdv |= PHY_B_P_SYM_MD;
+ break;
+ case SK_FLOW_MODE_SYM_OR_REM:
+ AutoNegAdv |= PHY_B_P_BOTH_MD;
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
+ SKERR_HWI_E016MSG);
+ }
+ }
+ else { /* special defines for FIBER (88E1011S only) */
+
+ /* Set Full/half duplex capabilities */
+ switch (pPrt->PLinkMode) {
+ case SK_LMODE_AUTOHALF:
+ AutoNegAdv |= PHY_M_AN_1000X_AHD;
+ break;
+ case SK_LMODE_AUTOFULL:
+ AutoNegAdv |= PHY_M_AN_1000X_AFD;
+ break;
+ case SK_LMODE_AUTOBOTH:
+ AutoNegAdv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD;
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
+ SKERR_HWI_E015MSG);
+ }
+
+ /* Set Auto-negotiation advertisement */
+ switch (pPrt->PFlowCtrlMode) {
+ case SK_FLOW_MODE_NONE:
+ AutoNegAdv |= PHY_M_P_NO_PAUSE_X;
+ break;
+ case SK_FLOW_MODE_LOC_SEND:
+ AutoNegAdv |= PHY_M_P_ASYM_MD_X;
+ break;
+ case SK_FLOW_MODE_SYMMETRIC:
+ AutoNegAdv |= PHY_M_P_SYM_MD_X;
+ break;
+ case SK_FLOW_MODE_SYM_OR_REM:
+ AutoNegAdv |= PHY_M_P_BOTH_MD_X;
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
+ SKERR_HWI_E016MSG);
+ }
+ }
+
+ if (!DoLoop) {
+ /* Restart Auto-negotiation */
+ PhyCtrl |= PHY_CT_RE_CFG;
+ }
+ }
+
+#ifdef VCPU
+ /*
+ * E-mail from Gu Lin (08-03-2002):
+ */
+
+ /* Program PHY register 30 as 16'h0708 for simulation speed up */
+ SkGmPhyWrite(pAC, IoC, Port, 30, 0x0708);
+
+ VCpuWait(2000);
+
+#else /* VCPU */
+
+ /* Write 1000Base-T Control Register */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_1000T_CTRL, C1000BaseT);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("1000B-T Ctrl=0x%04X\n", C1000BaseT));
+
+ /* Write AutoNeg Advertisement Register */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, AutoNegAdv);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Auto-Neg.Ad.=0x%04X\n", AutoNegAdv));
+#endif /* VCPU */
+
+ if (DoLoop) {
+ /* Set the PHY Loopback bit */
+ PhyCtrl |= PHY_CT_LOOP;
+
+ /* Program PHY register 16 as 16'h0400 to force link good */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, PHY_M_PC_FL_GOOD);
+
+#if 0
+ if (pPrt->PLinkSpeed != SK_LSPEED_AUTO) {
+ /* Write Ext. PHY Specific Control */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL,
+ (SK_U16)((pPrt->PLinkSpeed + 2) << 4));
+ }
+ }
+ else if (pPrt->PLinkSpeed == SK_LSPEED_10MBPS) {
+ /* Write PHY Specific Control */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, PHY_M_PC_EN_DET_MSK);
+ }
+#endif /* 0 */
+ }
+
+ /* Write to the PHY Control register */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl);
+
+#ifdef VCPU
+ VCpuWait(2000);
+#else
+
+ LedCtrl = PHY_M_LED_PULS_DUR(PULS_170MS) | PHY_M_LED_BLINK_RT(BLINK_84MS);
+
+#ifdef ACT_LED_BLINK
+ LedCtrl |= PHY_M_LEDC_RX_CTRL | PHY_M_LEDC_TX_CTRL;
+#endif /* ACT_LED_BLINK */
+
+#ifdef DUP_LED_NORMAL
+ LedCtrl |= PHY_M_LEDC_DP_CTRL;
+#endif /* DUP_LED_NORMAL */
+
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_CTRL, LedCtrl);
+
+#endif /* VCPU */
+
+#ifdef SK_DIAG
+ c_print("Set PHY Ctrl=0x%04X\n", PhyCtrl);
+ c_print("Set 1000 B-T=0x%04X\n", C1000BaseT);
+ c_print("Set Auto-Neg=0x%04X\n", AutoNegAdv);
+ c_print("Set Ext Ctrl=0x%04X\n", ExtPhyCtrl);
+#endif /* SK_DIAG */
+
+#ifndef xDEBUG
+ /* Read PHY Control */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("PHY Ctrl Reg.=0x%04X\n", PhyCtrl));
+
+ /* Read 1000Base-T Control Register */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_CTRL, &C1000BaseT);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("1000B-T Ctrl =0x%04X\n", C1000BaseT));
+
+ /* Read AutoNeg Advertisement Register */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &AutoNegAdv);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Auto-Neg. Ad.=0x%04X\n", AutoNegAdv));
+
+ /* Read Ext. PHY Specific Control */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Ext PHY Ctrl=0x%04X\n", ExtPhyCtrl));
+
+ /* Read PHY Status */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("PHY Stat Reg.=0x%04X\n", PhyStat));
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat1);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("PHY Stat Reg.=0x%04X\n", PhyStat1));
+
+ /* Read PHY Specific Status */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("PHY Spec Stat=0x%04X\n", PhySpecStat));
+#endif /* DEBUG */
+
+#ifdef SK_DIAG
+ c_print("PHY Ctrl Reg=0x%04X\n", PhyCtrl);
+ c_print("PHY 1000 Reg=0x%04X\n", C1000BaseT);
+ c_print("PHY AnAd Reg=0x%04X\n", AutoNegAdv);
+ c_print("Ext Ctrl Reg=0x%04X\n", ExtPhyCtrl);
+ c_print("PHY Stat Reg=0x%04X\n", PhyStat);
+ c_print("PHY Stat Reg=0x%04X\n", PhyStat1);
+ c_print("PHY Spec Reg=0x%04X\n", PhySpecStat);
+#endif /* SK_DIAG */
+
+} /* SkGmInitPhyMarv */
+
+
+#ifdef OTHER_PHY
+/******************************************************************************
+ *
+ * SkXmInitPhyLone() - Initialize the Level One Phy registers
+ *
+ * Description: initializes all the Level One Phy registers
+ *
+ * Note:
+ *
+ * Returns:
+ * nothing
+ */
+static void SkXmInitPhyLone(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */
+{
+ SK_GEPORT *pPrt;
+ SK_U16 Ctrl1;
+ SK_U16 Ctrl2;
+ SK_U16 Ctrl3;
+
+ Ctrl1 = PHY_CT_SP1000;
+ Ctrl2 = 0;
+ Ctrl3 = PHY_SEL_TYPE;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* manually Master/Slave ? */
+ if (pPrt->PMSMode != SK_MS_MODE_AUTO) {
+ Ctrl2 |= PHY_L_1000C_MSE;
+
+ if (pPrt->PMSMode == SK_MS_MODE_MASTER) {
+ Ctrl2 |= PHY_L_1000C_MSC;
+ }
+ }
+ /* Auto-negotiation ? */
+ if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+ /*
+ * level one spec say: "1000Mbps: manual mode not allowed"
+ * but lets see what happens...
+ */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("InitPhyLone: no auto-negotiation Port %d\n", Port));
+ /* Set DuplexMode in Config register */
+ Ctrl1 = (pPrt->PLinkMode == SK_LMODE_FULL ? PHY_CT_DUP_MD : 0);
+
+ /* Determine Master/Slave manually if not already done */
+ if (pPrt->PMSMode == SK_MS_MODE_AUTO) {
+ Ctrl2 |= PHY_L_1000C_MSE; /* set it to Slave */
+ }
+
+ /*
+ * Do NOT enable Auto-negotiation here. This would hold
+ * the link down because no IDLES are transmitted
+ */
+ }
+ else {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("InitPhyLone: with auto-negotiation Port %d\n", Port));
+ /* Set Auto-negotiation advertisement */
+
+ /* Set Full/half duplex capabilities */
+ switch (pPrt->PLinkMode) {
+ case SK_LMODE_AUTOHALF:
+ Ctrl2 |= PHY_L_1000C_AHD;
+ break;
+ case SK_LMODE_AUTOFULL:
+ Ctrl2 |= PHY_L_1000C_AFD;
+ break;
+ case SK_LMODE_AUTOBOTH:
+ Ctrl2 |= PHY_L_1000C_AFD | PHY_L_1000C_AHD;
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
+ SKERR_HWI_E015MSG);
+ }
+
+ switch (pPrt->PFlowCtrlMode) {
+ case SK_FLOW_MODE_NONE:
+ Ctrl3 |= PHY_L_P_NO_PAUSE;
+ break;
+ case SK_FLOW_MODE_LOC_SEND:
+ Ctrl3 |= PHY_L_P_ASYM_MD;
+ break;
+ case SK_FLOW_MODE_SYMMETRIC:
+ Ctrl3 |= PHY_L_P_SYM_MD;
+ break;
+ case SK_FLOW_MODE_SYM_OR_REM:
+ Ctrl3 |= PHY_L_P_BOTH_MD;
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
+ SKERR_HWI_E016MSG);
+ }
+
+ /* Restart Auto-negotiation */
+ Ctrl1 = PHY_CT_ANE | PHY_CT_RE_CFG;
+
+ }
+
+ /* Initialize LED register here ? */
+ /* No. Please do it in SkDgXmitLed() (if required) and swap
+ init order of LEDs and XMAC. (MAl) */
+
+ /* Write 1000Base-T Control Register */
+ SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_1000T_CTRL, Ctrl2);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("1000B-T Ctrl Reg=0x%04X\n", Ctrl2));
+
+ /* Write AutoNeg Advertisement Register */
+ SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_AUNE_ADV, Ctrl3);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Auto-Neg. Adv. Reg=0x%04X\n", Ctrl3));
+
+
+ if (DoLoop) {
+ /* Set the Phy Loopback bit, too */
+ Ctrl1 |= PHY_CT_LOOP;
+ }
+
+ /* Write to the Phy control register */
+ SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_CTRL, Ctrl1);
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("PHY Control Reg=0x%04X\n", Ctrl1));
+} /* SkXmInitPhyLone */
+
+
+/******************************************************************************
+ *
+ * SkXmInitPhyNat() - Initialize the National Phy registers
+ *
+ * Description: initializes all the National Phy registers
+ *
+ * Note:
+ *
+ * Returns:
+ * nothing
+ */
+static void SkXmInitPhyNat(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */
+{
+/* todo: National */
+} /* SkXmInitPhyNat */
+#endif /* OTHER_PHY */
+
+
+/******************************************************************************
+ *
+ * SkMacInitPhy() - Initialize the PHY registers
+ *
+ * Description: calls the Init PHY routines dep. on board type
+ *
+ * Note:
+ *
+ * Returns:
+ * nothing
+ */
+void SkMacInitPhy(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */
+{
+ SK_GEPORT *pPrt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ switch (pPrt->PhyType) {
+ case SK_PHY_XMAC:
+ SkXmInitPhyXmac(pAC, IoC, Port, DoLoop);
+ break;
+ case SK_PHY_BCOM:
+ SkXmInitPhyBcom(pAC, IoC, Port, DoLoop);
+ break;
+ case SK_PHY_MARV_COPPER:
+ case SK_PHY_MARV_FIBER:
+ SkGmInitPhyMarv(pAC, IoC, Port, DoLoop);
+ break;
+#ifdef OTHER_PHY
+ case SK_PHY_LONE:
+ SkXmInitPhyLone(pAC, IoC, Port, DoLoop);
+ break;
+ case SK_PHY_NAT:
+ SkXmInitPhyNat(pAC, IoC, Port, DoLoop);
+ break;
+#endif /* OTHER_PHY */
+ }
+} /* SkMacInitPhy */
+
+
+#ifndef SK_DIAG
+/******************************************************************************
+ *
+ * SkXmAutoNegLipaXmac() - Decides whether Link Partner could do auto-neg
+ *
+ * This function analyses the Interrupt status word. If any of the
+ * Auto-negotiating interrupt bits are set, the PLipaAutoNeg variable
+ * is set true.
+ */
+void SkXmAutoNegLipaXmac(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_U16 IStatus) /* Interrupt Status word to analyse */
+{
+ SK_GEPORT *pPrt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO &&
+ (IStatus & (XM_IS_LIPA_RC | XM_IS_RX_PAGE | XM_IS_AND)) != 0) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegLipa: AutoNeg detected on Port %d, IStatus=0x%04x\n",
+ Port, IStatus));
+ pPrt->PLipaAutoNeg = SK_LIPA_AUTO;
+ }
+} /* SkXmAutoNegLipaXmac */
+
+
+/******************************************************************************
+ *
+ * SkMacAutoNegLipaPhy() - Decides whether Link Partner could do auto-neg
+ *
+ * This function analyses the PHY status word.
+ * If any of the Auto-negotiating bits are set, the PLipaAutoNeg variable
+ * is set true.
+ */
+void SkMacAutoNegLipaPhy(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_U16 PhyStat) /* PHY Status word to analyse */
+{
+ SK_GEPORT *pPrt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO &&
+ (PhyStat & PHY_ST_AN_OVER) != 0) {
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegLipa: AutoNeg detected on Port %d, PhyStat=0x%04x\n",
+ Port, PhyStat));
+ pPrt->PLipaAutoNeg = SK_LIPA_AUTO;
+ }
+} /* SkMacAutoNegLipaPhy */
+#endif /* SK_DIAG */
+
+
+/******************************************************************************
+ *
+ * SkXmAutoNegDoneXmac() - Auto-negotiation handling
+ *
+ * Description:
+ * This function handles the auto-negotiation if the Done bit is set.
+ *
+ * Returns:
+ * SK_AND_OK o.k.
+ * SK_AND_DUP_CAP Duplex capability error happened
+ * SK_AND_OTHER Other error happened
+ */
+static int SkXmAutoNegDoneXmac(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_U16 ResAb; /* Resolved Ability */
+ SK_U16 LPAb; /* Link Partner Ability */
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegDoneXmac, Port %d\n",Port));
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* Get PHY parameters */
+ SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LPAb);
+ SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb);
+
+ if ((LPAb & PHY_X_AN_RFB) != 0) {
+ /* At least one of the remote fault bit is set */
+ /* Error */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegFail: Remote fault bit set Port %d\n", Port));
+ pPrt->PAutoNegFail = SK_TRUE;
+ return(SK_AND_OTHER);
+ }
+
+ /* Check Duplex mismatch */
+ if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_FD) {
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_AUTOFULL;
+ }
+ else if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_HD) {
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_AUTOHALF;
+ }
+ else {
+ /* Error */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegFail: Duplex mode mismatch Port %d\n", Port));
+ pPrt->PAutoNegFail = SK_TRUE;
+ return(SK_AND_DUP_CAP);
+ }
+
+ /* Check PAUSE mismatch */
+ /* We are NOT using chapter 4.23 of the Xaqti manual */
+ /* We are using IEEE 802.3z/D5.0 Table 37-4 */
+ if ((pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC ||
+ pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) &&
+ (LPAb & PHY_X_P_SYM_MD) != 0) {
+ /* Symmetric PAUSE */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
+ }
+ else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM &&
+ (LPAb & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD) {
+ /* Enable PAUSE receive, disable PAUSE transmit */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
+ }
+ else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND &&
+ (LPAb & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD) {
+ /* Disable PAUSE receive, enable PAUSE transmit */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
+ }
+ else {
+ /* PAUSE mismatch -> no PAUSE */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
+ }
+ pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_1000MBPS;
+
+ return(SK_AND_OK);
+} /* SkXmAutoNegDoneXmac */
+
+
+/******************************************************************************
+ *
+ * SkXmAutoNegDoneBcom() - Auto-negotiation handling
+ *
+ * Description:
+ * This function handles the auto-negotiation if the Done bit is set.
+ *
+ * Returns:
+ * SK_AND_OK o.k.
+ * SK_AND_DUP_CAP Duplex capability error happened
+ * SK_AND_OTHER Other error happened
+ */
+static int SkXmAutoNegDoneBcom(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_U16 LPAb; /* Link Partner Ability */
+ SK_U16 AuxStat; /* Auxiliary Status */
+
+#if 0
+01-Sep-2000 RA;:;:
+ SK_U16 ResAb; /* Resolved Ability */
+#endif /* 0 */
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegDoneBcom, Port %d\n", Port));
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* Get PHY parameters */
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LPAb);
+#if 0
+01-Sep-2000 RA;:;:
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
+#endif /* 0 */
+
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &AuxStat);
+
+ if ((LPAb & PHY_B_AN_RF) != 0) {
+ /* Remote fault bit is set: Error */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegFail: Remote fault bit set Port %d\n", Port));
+ pPrt->PAutoNegFail = SK_TRUE;
+ return(SK_AND_OTHER);
+ }
+
+ /* Check Duplex mismatch */
+ if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000FD) {
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_AUTOFULL;
+ }
+ else if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000HD) {
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_AUTOHALF;
+ }
+ else {
+ /* Error */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegFail: Duplex mode mismatch Port %d\n", Port));
+ pPrt->PAutoNegFail = SK_TRUE;
+ return(SK_AND_DUP_CAP);
+ }
+
+#if 0
+01-Sep-2000 RA;:;:
+ /* Check Master/Slave resolution */
+ if ((ResAb & PHY_B_1000S_MSF) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Master/Slave Fault Port %d\n", Port));
+ pPrt->PAutoNegFail = SK_TRUE;
+ pPrt->PMSStatus = SK_MS_STAT_FAULT;
+ return(SK_AND_OTHER);
+ }
+
+ pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
+ SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
+#endif /* 0 */
+
+ /* Check PAUSE mismatch */
+ /* We are using IEEE 802.3z/D5.0 Table 37-4 */
+ if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PAUSE_MSK) {
+ /* Symmetric PAUSE */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
+ }
+ else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRR) {
+ /* Enable PAUSE receive, disable PAUSE transmit */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
+ }
+ else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRT) {
+ /* Disable PAUSE receive, enable PAUSE transmit */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
+ }
+ else {
+ /* PAUSE mismatch -> no PAUSE */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
+ }
+ pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_1000MBPS;
+
+ return(SK_AND_OK);
+} /* SkXmAutoNegDoneBcom */
+
+
+/******************************************************************************
+ *
+ * SkGmAutoNegDoneMarv() - Auto-negotiation handling
+ *
+ * Description:
+ * This function handles the auto-negotiation if the Done bit is set.
+ *
+ * Returns:
+ * SK_AND_OK o.k.
+ * SK_AND_DUP_CAP Duplex capability error happened
+ * SK_AND_OTHER Other error happened
+ */
+static int SkGmAutoNegDoneMarv(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_U16 LPAb; /* Link Partner Ability */
+ SK_U16 ResAb; /* Resolved Ability */
+ SK_U16 AuxStat; /* Auxiliary Status */
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegDoneMarv, Port %d\n", Port));
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* Get PHY parameters */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_LP, &LPAb);
+
+ if ((LPAb & PHY_M_AN_RF) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegFail: Remote fault bit set Port %d\n", Port));
+ pPrt->PAutoNegFail = SK_TRUE;
+ return(SK_AND_OTHER);
+ }
+
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb);
+
+ /* Check Master/Slave resolution */
+ if ((ResAb & PHY_B_1000S_MSF) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Master/Slave Fault Port %d\n", Port));
+ pPrt->PAutoNegFail = SK_TRUE;
+ pPrt->PMSStatus = SK_MS_STAT_FAULT;
+ return(SK_AND_OTHER);
+ }
+
+ pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
+ (SK_U8)SK_MS_STAT_MASTER : (SK_U8)SK_MS_STAT_SLAVE;
+
+ /* Read PHY Specific Status */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &AuxStat);
+
+ /* Check Speed & Duplex resolved */
+ if ((AuxStat & PHY_M_PS_SPDUP_RES) == 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegFail: Speed & Duplex not resolved Port %d\n", Port));
+ pPrt->PAutoNegFail = SK_TRUE;
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_UNKNOWN;
+ return(SK_AND_DUP_CAP);
+ }
+
+ if ((AuxStat & PHY_M_PS_FULL_DUP) != 0) {
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_AUTOFULL;
+ }
+ else {
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_AUTOHALF;
+ }
+
+ /* Check PAUSE mismatch */
+ /* We are using IEEE 802.3z/D5.0 Table 37-4 */
+ if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_PAUSE_MSK) {
+ /* Symmetric PAUSE */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
+ }
+ else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_RX_P_EN) {
+ /* Enable PAUSE receive, disable PAUSE transmit */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
+ }
+ else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_TX_P_EN) {
+ /* Disable PAUSE receive, enable PAUSE transmit */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
+ }
+ else {
+ /* PAUSE mismatch -> no PAUSE */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
+ }
+
+ /* set used link speed */
+ switch ((unsigned)(AuxStat & PHY_M_PS_SPEED_MSK)) {
+ case (unsigned)PHY_M_PS_SPEED_1000:
+ pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_1000MBPS;
+ break;
+ case PHY_M_PS_SPEED_100:
+ pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_100MBPS;
+ break;
+ default:
+ pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_10MBPS;
+ }
+
+ return(SK_AND_OK);
+} /* SkGmAutoNegDoneMarv */
+
+
+#ifdef OTHER_PHY
+/******************************************************************************
+ *
+ * SkXmAutoNegDoneLone() - Auto-negotiation handling
+ *
+ * Description:
+ * This function handles the auto-negotiation if the Done bit is set.
+ *
+ * Returns:
+ * SK_AND_OK o.k.
+ * SK_AND_DUP_CAP Duplex capability error happened
+ * SK_AND_OTHER Other error happened
+ */
+static int SkXmAutoNegDoneLone(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_U16 ResAb; /* Resolved Ability */
+ SK_U16 LPAb; /* Link Partner Ability */
+ SK_U16 QuickStat; /* Auxiliary Status */
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegDoneLone, Port %d\n",Port));
+ pPrt = &pAC->GIni.GP[Port];
+
+ /* Get PHY parameters */
+ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LPAb);
+ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ResAb);
+ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_Q_STAT, &QuickStat);
+
+ if ((LPAb & PHY_L_AN_RF) != 0) {
+ /* Remote fault bit is set */
+ /* Error */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("AutoNegFail: Remote fault bit set Port %d\n", Port));
+ pPrt->PAutoNegFail = SK_TRUE;
+ return(SK_AND_OTHER);
+ }
+
+ /* Check Duplex mismatch */
+ if ((QuickStat & PHY_L_QS_DUP_MOD) != 0) {
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_AUTOFULL;
+ }
+ else {
+ pPrt->PLinkModeStatus = SK_LMODE_STAT_AUTOHALF;
+ }
+
+ /* Check Master/Slave resolution */
+ if ((ResAb & PHY_L_1000S_MSF) != 0) {
+ /* Error */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("Master/Slave Fault Port %d\n", Port));
+ pPrt->PAutoNegFail = SK_TRUE;
+ pPrt->PMSStatus = SK_MS_STAT_FAULT;
+ return(SK_AND_OTHER);
+ }
+ else if (ResAb & PHY_L_1000S_MSR) {
+ pPrt->PMSStatus = SK_MS_STAT_MASTER;
+ }
+ else {
+ pPrt->PMSStatus = SK_MS_STAT_SLAVE;
+ }
+
+ /* Check PAUSE mismatch */
+ /* We are using IEEE 802.3z/D5.0 Table 37-4 */
+ /* we must manually resolve the abilities here */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
+ switch (pPrt->PFlowCtrlMode) {
+ case SK_FLOW_MODE_NONE:
+ /* default */
+ break;
+ case SK_FLOW_MODE_LOC_SEND:
+ if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) ==
+ (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) {
+ /* Disable PAUSE receive, enable PAUSE transmit */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
+ }
+ break;
+ case SK_FLOW_MODE_SYMMETRIC:
+ if ((QuickStat & PHY_L_QS_PAUSE) != 0) {
+ /* Symmetric PAUSE */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
+ }
+ break;
+ case SK_FLOW_MODE_SYM_OR_REM:
+ if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) ==
+ PHY_L_QS_AS_PAUSE) {
+ /* Enable PAUSE receive, disable PAUSE transmit */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
+ }
+ else if ((QuickStat & PHY_L_QS_PAUSE) != 0) {
+ /* Symmetric PAUSE */
+ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
+ }
+ break;
+ default:
+ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
+ SKERR_HWI_E016MSG);
+ }
+
+ return(SK_AND_OK);
+} /* SkXmAutoNegDoneLone */
+
+
+/******************************************************************************
+ *
+ * SkXmAutoNegDoneNat() - Auto-negotiation handling
+ *
+ * Description:
+ * This function handles the auto-negotiation if the Done bit is set.
+ *
+ * Returns:
+ * SK_AND_OK o.k.
+ * SK_AND_DUP_CAP Duplex capability error happened
+ * SK_AND_OTHER Other error happened
+ */
+static int SkXmAutoNegDoneNat(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+/* todo: National */
+ return(SK_AND_OK);
+} /* SkXmAutoNegDoneNat */
+#endif /* OTHER_PHY */
+
+
+/******************************************************************************
+ *
+ * SkMacAutoNegDone() - Auto-negotiation handling
+ *
+ * Description: calls the auto-negotiation done routines dep. on board type
+ *
+ * Returns:
+ * SK_AND_OK o.k.
+ * SK_AND_DUP_CAP Duplex capability error happened
+ * SK_AND_OTHER Other error happened
+ */
+int SkMacAutoNegDone(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ int Rtv;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ switch (pPrt->PhyType) {
+ case SK_PHY_XMAC:
+ Rtv = SkXmAutoNegDoneXmac(pAC, IoC, Port);
+ break;
+ case SK_PHY_BCOM:
+ Rtv = SkXmAutoNegDoneBcom(pAC, IoC, Port);
+ break;
+ case SK_PHY_MARV_COPPER:
+ case SK_PHY_MARV_FIBER:
+ Rtv = SkGmAutoNegDoneMarv(pAC, IoC, Port);
+ break;
+#ifdef OTHER_PHY
+ case SK_PHY_LONE:
+ Rtv = SkXmAutoNegDoneLone(pAC, IoC, Port);
+ break;
+ case SK_PHY_NAT:
+ Rtv = SkXmAutoNegDoneNat(pAC, IoC, Port);
+ break;
+#endif /* OTHER_PHY */
+ default:
+ return(SK_AND_OTHER);
+ }
+
+ if (Rtv != SK_AND_OK) {
+ return(Rtv);
+ }
+
+ /* We checked everything and may now enable the link */
+ pPrt->PAutoNegFail = SK_FALSE;
+
+ SkMacRxTxEnable(pAC, IoC, Port);
+
+ return(SK_AND_OK);
+} /* SkMacAutoNegDone */
+
+
+/******************************************************************************
+ *
+ * SkXmSetRxTxEn() - Special Set Rx/Tx Enable and some features in XMAC
+ *
+ * Description:
+ * sets MAC or PHY LoopBack and Duplex Mode in the MMU Command Reg.
+ * enables Rx/Tx
+ *
+ * Returns: N/A
+ */
+static void SkXmSetRxTxEn(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+int Para) /* Parameter to set: MAC or PHY LoopBack, Duplex Mode */
+{
+ SK_U16 Word;
+
+ XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
+
+ switch (Para & (SK_MAC_LOOPB_ON | SK_MAC_LOOPB_OFF)) {
+ case SK_MAC_LOOPB_ON:
+ Word |= XM_MMU_MAC_LB;
+ break;
+ case SK_MAC_LOOPB_OFF:
+ Word &= ~XM_MMU_MAC_LB;
+ break;
+ }
+
+ switch (Para & (SK_PHY_LOOPB_ON | SK_PHY_LOOPB_OFF)) {
+ case SK_PHY_LOOPB_ON:
+ Word |= XM_MMU_GMII_LOOP;
+ break;
+ case SK_PHY_LOOPB_OFF:
+ Word &= ~XM_MMU_GMII_LOOP;
+ break;
+ }
+
+ switch (Para & (SK_PHY_FULLD_ON | SK_PHY_FULLD_OFF)) {
+ case SK_PHY_FULLD_ON:
+ Word |= XM_MMU_GMII_FD;
+ break;
+ case SK_PHY_FULLD_OFF:
+ Word &= ~XM_MMU_GMII_FD;
+ break;
+ }
+
+ XM_OUT16(IoC, Port, XM_MMU_CMD, Word | XM_MMU_ENA_RX | XM_MMU_ENA_TX);
+
+ /* dummy read to ensure writing */
+ XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
+
+} /* SkXmSetRxTxEn */
+
+
+/******************************************************************************
+ *
+ * SkGmSetRxTxEn() - Special Set Rx/Tx Enable and some features in GMAC
+ *
+ * Description:
+ * sets MAC LoopBack and Duplex Mode in the General Purpose Control Reg.
+ * enables Rx/Tx
+ *
+ * Returns: N/A
+ */
+static void SkGmSetRxTxEn(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+int Para) /* Parameter to set: MAC LoopBack, Duplex Mode */
+{
+ SK_U16 Ctrl;
+
+ GM_IN16(IoC, Port, GM_GP_CTRL, &Ctrl);
+
+ switch (Para & (SK_MAC_LOOPB_ON | SK_MAC_LOOPB_OFF)) {
+ case SK_MAC_LOOPB_ON:
+ Ctrl |= GM_GPCR_LOOP_ENA;
+ break;
+ case SK_MAC_LOOPB_OFF:
+ Ctrl &= ~GM_GPCR_LOOP_ENA;
+ break;
+ }
+
+ switch (Para & (SK_PHY_FULLD_ON | SK_PHY_FULLD_OFF)) {
+ case SK_PHY_FULLD_ON:
+ Ctrl |= GM_GPCR_DUP_FULL;
+ break;
+ case SK_PHY_FULLD_OFF:
+ Ctrl &= ~GM_GPCR_DUP_FULL;
+ break;
+ }
+
+ GM_OUT16(IoC, Port, GM_GP_CTRL, Ctrl | GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
+
+ /* dummy read to ensure writing */
+ GM_IN16(IoC, Port, GM_GP_CTRL, &Ctrl);
+
+} /* SkGmSetRxTxEn */
+
+
+/******************************************************************************
+ *
+ * SkMacSetRxTxEn() - Special Set Rx/Tx Enable and parameters
+ *
+ * Description: calls the Special Set Rx/Tx Enable routines dep. on board type
+ *
+ * Returns: N/A
+ */
+void SkMacSetRxTxEn(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+int Para)
+{
+ if (pAC->GIni.GIGenesis) {
+
+ SkXmSetRxTxEn(pAC, IoC, Port, Para);
+ }
+ else {
+
+ SkGmSetRxTxEn(pAC, IoC, Port, Para);
+ }
+
+} /* SkMacSetRxTxEn */
+
+
+/******************************************************************************
+ *
+ * SkMacRxTxEnable() - Enable Rx/Tx activity if port is up
+ *
+ * Description: enables Rx/Tx dep. on board type
+ *
+ * Returns:
+ * 0 o.k.
+ * != 0 Error happened
+ */
+int SkMacRxTxEnable(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_U16 Reg; /* 16-bit register value */
+ SK_U16 IntMask; /* MAC interrupt mask */
+ SK_U16 SWord;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (!pPrt->PHWLinkUp) {
+ /* The Hardware link is NOT up */
+ return(0);
+ }
+
+ if ((pPrt->PLinkMode == SK_LMODE_AUTOHALF ||
+ pPrt->PLinkMode == SK_LMODE_AUTOFULL ||
+ pPrt->PLinkMode == SK_LMODE_AUTOBOTH) &&
+ pPrt->PAutoNegFail) {
+ /* Auto-negotiation is not done or failed */
+ return(0);
+ }
+
+ if (pAC->GIni.GIGenesis) {
+ /* set Duplex Mode and Pause Mode */
+ SkXmInitDupMd(pAC, IoC, Port);
+
+ SkXmInitPauseMd(pAC, IoC, Port);
+
+ /*
+ * Initialize the Interrupt Mask Register. Default IRQs are...
+ * - Link Asynchronous Event
+ * - Link Partner requests config
+ * - Auto Negotiation Done
+ * - Rx Counter Event Overflow
+ * - Tx Counter Event Overflow
+ * - Transmit FIFO Underrun
+ */
+ IntMask = XM_DEF_MSK;
+
+#ifdef DEBUG
+ /* add IRQ for Receive FIFO Overflow */
+ IntMask &= ~XM_IS_RXF_OV;
+#endif /* DEBUG */
+
+ if (pPrt->PhyType != SK_PHY_XMAC) {
+ /* disable GP0 interrupt bit */
+ IntMask |= XM_IS_INP_ASS;
+ }
+ XM_OUT16(IoC, Port, XM_IMSK, IntMask);
+
+ /* get MMU Command Reg. */
+ XM_IN16(IoC, Port, XM_MMU_CMD, &Reg);
+
+ if (pPrt->PhyType != SK_PHY_XMAC &&
+ (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL ||
+ pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL)) {
+ /* set to Full Duplex */
+ Reg |= XM_MMU_GMII_FD;
+ }
+
+ switch (pPrt->PhyType) {
+ case SK_PHY_BCOM:
+ /*
+ * Workaround BCOM Errata (#10523) for all BCom Phys
+ * Enable Power Management after link up
+ */
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord);
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL,
+ (SK_U16)(SWord & ~PHY_B_AC_DIS_PM));
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK);
+ break;
+#ifdef OTHER_PHY
+ case SK_PHY_LONE:
+ SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, PHY_L_DEF_MSK);
+ break;
+ case SK_PHY_NAT:
+ /* todo National:
+ SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, PHY_N_DEF_MSK); */
+ /* no interrupts possible from National ??? */
+ break;
+#endif /* OTHER_PHY */
+ }
+
+ /* enable Rx/Tx */
+ XM_OUT16(IoC, Port, XM_MMU_CMD, Reg | XM_MMU_ENA_RX | XM_MMU_ENA_TX);
+ }
+ else {
+ /*
+ * Initialize the Interrupt Mask Register. Default IRQs are...
+ * - Rx Counter Event Overflow
+ * - Tx Counter Event Overflow
+ * - Transmit FIFO Underrun
+ */
+ IntMask = GMAC_DEF_MSK;
+
+#ifdef DEBUG
+ /* add IRQ for Receive FIFO Overrun */
+ IntMask |= GM_IS_RX_FF_OR;
+#endif /* DEBUG */
+
+ SK_OUT8(IoC, GMAC_IRQ_MSK, (SK_U8)IntMask);
+
+ /* get General Purpose Control */
+ GM_IN16(IoC, Port, GM_GP_CTRL, &Reg);
+
+ if (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL ||
+ pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) {
+ /* set to Full Duplex */
+ Reg |= GM_GPCR_DUP_FULL;
+ }
+
+ /* enable Rx/Tx */
+ GM_OUT16(IoC, Port, GM_GP_CTRL, Reg | GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
+
+#ifndef VCPU
+ /* Enable all PHY interrupts */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+#endif /* VCPU */
+ }
+
+ return(0);
+
+} /* SkMacRxTxEnable */
+
+
+/******************************************************************************
+ *
+ * SkMacRxTxDisable() - Disable Receiver and Transmitter
+ *
+ * Description: disables Rx/Tx dep. on board type
+ *
+ * Returns: N/A
+ */
+void SkMacRxTxDisable(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_U16 Word;
+
+ if (pAC->GIni.GIGenesis) {
+
+ XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
+
+ XM_OUT16(IoC, Port, XM_MMU_CMD, Word & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX));
+
+ /* dummy read to ensure writing */
+ XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
+ }
+ else {
+
+ GM_IN16(IoC, Port, GM_GP_CTRL, &Word);
+
+ GM_OUT16(IoC, Port, GM_GP_CTRL, Word & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA));
+
+ /* dummy read to ensure writing */
+ GM_IN16(IoC, Port, GM_GP_CTRL, &Word);
+ }
+} /* SkMacRxTxDisable */
+
+
+/******************************************************************************
+ *
+ * SkMacIrqDisable() - Disable IRQ from MAC
+ *
+ * Description: sets the IRQ-mask to disable IRQ dep. on board type
+ *
+ * Returns: N/A
+ */
+void SkMacIrqDisable(
+SK_AC *pAC, /* Adapter Context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_U16 Word;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (pAC->GIni.GIGenesis) {
+
+ /* disable all XMAC IRQs */
+ XM_OUT16(IoC, Port, XM_IMSK, 0xffff);
+
+ /* Disable all PHY interrupts */
+ switch (pPrt->PhyType) {
+ case SK_PHY_BCOM:
+ /* Make sure that PHY is initialized */
+ if (pPrt->PState != SK_PRT_RESET) {
+ /* NOT allowed if BCOM is in RESET state */
+ /* Workaround BCOM Errata (#10523) all BCom */
+ /* Disable Power Management if link is down */
+ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Word);
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL,
+ (SK_U16)(Word | PHY_B_AC_DIS_PM));
+ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff);
+ }
+ break;
+#ifdef OTHER_PHY
+ case SK_PHY_LONE:
+ SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0);
+ break;
+ case SK_PHY_NAT:
+ /* todo: National
+ SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */
+ break;
+#endif /* OTHER_PHY */
+ }
+ }
+ else {
+ /* disable all GMAC IRQs */
+ SK_OUT8(IoC, GMAC_IRQ_MSK, 0);
+
+#ifndef VCPU
+ /* Disable all PHY interrupts */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0);
+#endif /* VCPU */
+ }
+} /* SkMacIrqDisable */
+
+
+#ifdef SK_DIAG
+/******************************************************************************
+ *
+ * SkXmSendCont() - Enable / Disable Send Continuous Mode
+ *
+ * Description: enable / disable Send Continuous Mode on XMAC
+ *
+ * Returns:
+ * nothing
+ */
+void SkXmSendCont(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL Enable) /* Enable / Disable */
+{
+ SK_U32 MdReg;
+
+ XM_IN32(IoC, Port, XM_MODE, &MdReg);
+
+ if (Enable) {
+ MdReg |= XM_MD_TX_CONT;
+ }
+ else {
+ MdReg &= ~XM_MD_TX_CONT;
+ }
+ /* setup Mode Register */
+ XM_OUT32(IoC, Port, XM_MODE, MdReg);
+
+} /* SkXmSendCont*/
+
+/******************************************************************************
+ *
+ * SkMacTimeStamp() - Enable / Disable Time Stamp
+ *
+ * Description: enable / disable Time Stamp generation for Rx packets
+ *
+ * Returns:
+ * nothing
+ */
+void SkMacTimeStamp(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL Enable) /* Enable / Disable */
+{
+ SK_U32 MdReg;
+ SK_U8 TimeCtrl;
+
+ if (pAC->GIni.GIGenesis) {
+
+ XM_IN32(IoC, Port, XM_MODE, &MdReg);
+
+ if (Enable) {
+ MdReg |= XM_MD_ATS;
+ }
+ else {
+ MdReg &= ~XM_MD_ATS;
+ }
+ /* setup Mode Register */
+ XM_OUT32(IoC, Port, XM_MODE, MdReg);
+ }
+ else {
+ if (Enable) {
+ TimeCtrl = GMT_ST_START | GMT_ST_CLR_IRQ;
+ }
+ else {
+ TimeCtrl = GMT_ST_STOP | GMT_ST_CLR_IRQ;
+ }
+ /* Start/Stop Time Stamp Timer */
+ SK_OUT8(pAC, GMAC_TI_ST_CTRL, TimeCtrl);
+ }
+} /* SkMacTimeStamp*/
+
+#else /* SK_DIAG */
+
+/******************************************************************************
+ *
+ * SkXmIrq() - Interrupt Service Routine
+ *
+ * Description: services an Interrupt Request of the XMAC
+ *
+ * Note:
+ * With an external PHY, some interrupt bits are not meaningfull any more:
+ * - LinkAsyncEvent (bit #14) XM_IS_LNK_AE
+ * - LinkPartnerReqConfig (bit #10) XM_IS_LIPA_RC
+ * - Page Received (bit #9) XM_IS_RX_PAGE
+ * - NextPageLoadedForXmt (bit #8) XM_IS_TX_PAGE
+ * - AutoNegDone (bit #7) XM_IS_AND
+ * Also probably not valid any more is the GP0 input bit:
+ * - GPRegisterBit0set XM_IS_INP_ASS
+ *
+ * Returns:
+ * nothing
+ */
+void SkXmIrq(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_EVPARA Para;
+ SK_U16 IStatus; /* Interrupt status read from the XMAC */
+ SK_U16 IStatus2;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ XM_IN16(IoC, Port, XM_ISRC, &IStatus);
+
+ /* LinkPartner Auto-negable? */
+ if (pPrt->PhyType == SK_PHY_XMAC) {
+ SkXmAutoNegLipaXmac(pAC, IoC, Port, IStatus);
+ }
+ else {
+ /* mask bits that are not used with ext. PHY */
+ IStatus &= ~(XM_IS_LNK_AE | XM_IS_LIPA_RC |
+ XM_IS_RX_PAGE | XM_IS_TX_PAGE |
+ XM_IS_AND | XM_IS_INP_ASS);
+ }
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("XmacIrq Port %d Isr 0x%04x\n", Port, IStatus));
+
+ if (!pPrt->PHWLinkUp) {
+ /* Spurious XMAC interrupt */
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("SkXmIrq: spurious interrupt on Port %d\n", Port));
+ return;
+ }
+
+ if ((IStatus & XM_IS_INP_ASS) != 0) {
+ /* Reread ISR Register if link is not in sync */
+ XM_IN16(IoC, Port, XM_ISRC, &IStatus2);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("SkXmIrq: Link async. Double check Port %d 0x%04x 0x%04x\n",
+ Port, IStatus, IStatus2));
+ IStatus &= ~XM_IS_INP_ASS;
+ IStatus |= IStatus2;
+ }
+
+ if ((IStatus & XM_IS_LNK_AE) != 0) {
+ /* not used, GP0 is used instead */
+ }
+
+ if ((IStatus & XM_IS_TX_ABORT) != 0) {
+ /* not used */
+ }
+
+ if ((IStatus & XM_IS_FRC_INT) != 0) {
+ /* not used, use ASIC IRQ instead if needed */
+ }
+
+ if ((IStatus & (XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE)) != 0) {
+ SkHWLinkDown(pAC, IoC, Port);
+
+ /* Signal to RLMT */
+ Para.Para32[0] = (SK_U32)Port;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+
+ /* Start workaround Errata #2 timer */
+ SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
+ SKGE_HWAC, SK_HWEV_WATIM, Para);
+ }
+
+ if ((IStatus & XM_IS_RX_PAGE) != 0) {
+ /* not used */
+ }
+
+ if ((IStatus & XM_IS_TX_PAGE) != 0) {
+ /* not used */
+ }
+
+ if ((IStatus & XM_IS_AND) != 0) {
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("SkXmIrq: AND on link that is up Port %d\n", Port));
+ }
+
+ if ((IStatus & XM_IS_TSC_OV) != 0) {
+ /* not used */
+ }
+
+ /* Combined Tx & Rx Counter Overflow SIRQ Event */
+ if ((IStatus & (XM_IS_RXC_OV | XM_IS_TXC_OV)) != 0) {
+ Para.Para32[0] = (SK_U32)Port;
+ Para.Para32[1] = (SK_U32)IStatus;
+ SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para);
+ }
+
+ if ((IStatus & XM_IS_RXF_OV) != 0) {
+ /* normal situation -> no effect */
+#ifdef DEBUG
+ pPrt->PRxOverCnt++;
+#endif /* DEBUG */
+ }
+
+ if ((IStatus & XM_IS_TXF_UR) != 0) {
+ /* may NOT happen -> error log */
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG);
+ }
+
+ if ((IStatus & XM_IS_TX_COMP) != 0) {
+ /* not served here */
+ }
+
+ if ((IStatus & XM_IS_RX_COMP) != 0) {
+ /* not served here */
+ }
+} /* SkXmIrq */
+
+
+/******************************************************************************
+ *
+ * SkGmIrq() - Interrupt Service Routine
+ *
+ * Description: services an Interrupt Request of the GMAC
+ *
+ * Note:
+ *
+ * Returns:
+ * nothing
+ */
+void SkGmIrq(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_EVPARA Para;
+ SK_U8 IStatus; /* Interrupt status */
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ SK_IN8(IoC, GMAC_IRQ_SRC, &IStatus);
+
+ /* LinkPartner Auto-negable? */
+ SkMacAutoNegLipaPhy(pAC, IoC, Port, IStatus);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+ ("GmacIrq Port %d Isr 0x%04x\n", Port, IStatus));
+
+ /* Combined Tx & Rx Counter Overflow SIRQ Event */
+ if (IStatus & (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV)) {
+ /* these IRQs will be cleared by reading GMACs register */
+ Para.Para32[0] = (SK_U32)Port;
+ Para.Para32[1] = (SK_U32)IStatus;
+ SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para);
+ }
+
+ if (IStatus & GM_IS_RX_FF_OR) {
+ /* clear GMAC Rx FIFO Overrun IRQ */
+ SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_CLI_RX_FO);
+#ifdef DEBUG
+ pPrt->PRxOverCnt++;
+#endif /* DEBUG */
+ }
+
+ if (IStatus & GM_IS_TX_FF_UR) {
+ /* clear GMAC Tx FIFO Underrun IRQ */
+ SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_CLI_TX_FU);
+ /* may NOT happen -> error log */
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG);
+ }
+
+ if (IStatus & GM_IS_TX_COMPL) {
+ /* not served here */
+ }
+
+ if (IStatus & GM_IS_RX_COMPL) {
+ /* not served here */
+ }
+} /* SkGmIrq */
+
+/******************************************************************************
+ *
+ * SkMacIrq() - Interrupt Service Routine for MAC
+ *
+ * Description: calls the Interrupt Service Routine dep. on board type
+ *
+ * Returns:
+ * nothing
+ */
+void SkMacIrq(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port) /* Port Index (MAC_1 + n) */
+{
+
+ if (pAC->GIni.GIGenesis) {
+ /* IRQ from XMAC */
+ SkXmIrq(pAC, IoC, Port);
+ }
+ else {
+ /* IRQ from GMAC */
+ SkGmIrq(pAC, IoC, Port);
+ }
+} /* SkMacIrq */
+
+#endif /* !SK_DIAG */
+
+/******************************************************************************
+ *
+ * SkXmUpdateStats() - Force the XMAC to output the current statistic
+ *
+ * Description:
+ * The XMAC holds its statistic internally. To obtain the current
+ * values a command must be sent so that the statistic data will
+ * be written to a predefined memory area on the adapter.
+ *
+ * Returns:
+ * 0: success
+ * 1: something went wrong
+ */
+int SkXmUpdateStats(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+unsigned int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_GEPORT *pPrt;
+ SK_U16 StatReg;
+ int WaitIndex;
+
+ pPrt = &pAC->GIni.GP[Port];
+ WaitIndex = 0;
+
+ /* Send an update command to XMAC specified */
+ XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC);
+
+ /*
+ * It is an auto-clearing register. If the command bits
+ * went to zero again, the statistics are transferred.
+ * Normally the command should be executed immediately.
+ * But just to be sure we execute a loop.
+ */
+ do {
+
+ XM_IN16(IoC, Port, XM_STAT_CMD, &StatReg);
+
+ if (++WaitIndex > 10) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E021, SKERR_HWI_E021MSG);
+
+ return(1);
+ }
+ } while ((StatReg & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) != 0);
+
+ return(0);
+} /* SkXmUpdateStats */
+
+/******************************************************************************
+ *
+ * SkGmUpdateStats() - Force the GMAC to output the current statistic
+ *
+ * Description:
+ * Empty function for GMAC. Statistic data is accessible in direct way.
+ *
+ * Returns:
+ * 0: success
+ * 1: something went wrong
+ */
+int SkGmUpdateStats(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+unsigned int Port) /* Port Index (MAC_1 + n) */
+{
+ return(0);
+}
+
+/******************************************************************************
+ *
+ * SkXmMacStatistic() - Get XMAC counter value
+ *
+ * Description:
+ * Gets the 32bit counter value. Except for the octet counters
+ * the lower 32bit are counted in hardware and the upper 32bit
+ * must be counted in software by monitoring counter overflow interrupts.
+ *
+ * Returns:
+ * 0: success
+ * 1: something went wrong
+ */
+int SkXmMacStatistic(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+unsigned int Port, /* Port Index (MAC_1 + n) */
+SK_U16 StatAddr, /* MIB counter base address */
+SK_U32 *pVal) /* ptr to return statistic value */
+{
+ if ((StatAddr < XM_TXF_OK) || (StatAddr > XM_RXF_MAX_SZ)) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG);
+
+ return(1);
+ }
+
+ XM_IN32(IoC, Port, StatAddr, pVal);
+
+ return(0);
+} /* SkXmMacStatistic */
+
+/******************************************************************************
+ *
+ * SkGmMacStatistic() - Get GMAC counter value
+ *
+ * Description:
+ * Gets the 32bit counter value. Except for the octet counters
+ * the lower 32bit are counted in hardware and the upper 32bit
+ * must be counted in software by monitoring counter overflow interrupts.
+ *
+ * Returns:
+ * 0: success
+ * 1: something went wrong
+ */
+int SkGmMacStatistic(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+unsigned int Port, /* Port Index (MAC_1 + n) */
+SK_U16 StatAddr, /* MIB counter base address */
+SK_U32 *pVal) /* ptr to return statistic value */
+{
+
+ if ((StatAddr < GM_RXF_UC_OK) || (StatAddr > GM_TXE_FIFO_UR)) {
+
+ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("SkGmMacStat: wrong MIB counter 0x%04X\n", StatAddr));
+ return(1);
+ }
+
+ GM_IN32(IoC, Port, StatAddr, pVal);
+
+ return(0);
+} /* SkGmMacStatistic */
+
+/******************************************************************************
+ *
+ * SkXmResetCounter() - Clear MAC statistic counter
+ *
+ * Description:
+ * Force the XMAC to clear its statistic counter.
+ *
+ * Returns:
+ * 0: success
+ * 1: something went wrong
+ */
+int SkXmResetCounter(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+unsigned int Port) /* Port Index (MAC_1 + n) */
+{
+ XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+ /* Clear two times according to Errata #3 */
+ XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+
+ return(0);
+} /* SkXmResetCounter */
+
+/******************************************************************************
+ *
+ * SkGmResetCounter() - Clear MAC statistic counter
+ *
+ * Description:
+ * Force GMAC to clear its statistic counter.
+ *
+ * Returns:
+ * 0: success
+ * 1: something went wrong
+ */
+int SkGmResetCounter(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+unsigned int Port) /* Port Index (MAC_1 + n) */
+{
+ SK_U16 Reg; /* Phy Address Register */
+ SK_U16 Word;
+ int i;
+
+ GM_IN16(IoC, Port, GM_PHY_ADDR, &Reg);
+
+#ifndef VCPU
+ /* set MIB Clear Counter Mode */
+ GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg | GM_PAR_MIB_CLR);
+
+ /* read all MIB Counters with Clear Mode set */
+ for (i = 0; i < GM_MIB_CNT_SIZE; i++) {
+ /* the reset is performed only when the lower 16 bits are read */
+ GM_IN16(IoC, Port, GM_MIB_CNT_BASE + 8*i, &Word);
+ }
+
+ /* clear MIB Clear Counter Mode */
+ GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg);
+#endif /* !VCPU */
+
+ return(0);
+} /* SkGmResetCounter */
+
+/******************************************************************************
+ *
+ * SkXmOverflowStatus() - Gets the status of counter overflow interrupt
+ *
+ * Description:
+ * Checks the source causing an counter overflow interrupt. On success the
+ * resulting counter overflow status is written to <pStatus>, whereas the
+ * upper dword stores the XMAC ReceiveCounterEvent register and the lower
+ * dword the XMAC TransmitCounterEvent register.
+ *
+ * Note:
+ * For XMAC the interrupt source is a self-clearing register, so the source
+ * must be checked only once. SIRQ module does another check to be sure
+ * that no interrupt get lost during process time.
+ *
+ * Returns:
+ * 0: success
+ * 1: something went wrong
+ */
+int SkXmOverflowStatus(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+unsigned int Port, /* Port Index (MAC_1 + n) */
+SK_U16 IStatus, /* Interupt Status from MAC */
+SK_U64 *pStatus) /* ptr for return overflow status value */
+{
+ SK_U64 Status; /* Overflow status */
+ SK_U32 RegVal;
+
+ Status = 0;
+
+ if ((IStatus & XM_IS_RXC_OV) != 0) {
+
+ XM_IN32(IoC, Port, XM_RX_CNT_EV, &RegVal);
+ Status |= (SK_U64)RegVal << 32;
+ }
+
+ if ((IStatus & XM_IS_TXC_OV) != 0) {
+
+ XM_IN32(IoC, Port, XM_TX_CNT_EV, &RegVal);
+ Status |= (SK_U64)RegVal;
+ }
+
+ *pStatus = Status;
+
+ return(0);
+} /* SkXmOverflowStatus */
+
+
+/******************************************************************************
+ *
+ * SkGmOverflowStatus() - Gets the status of counter overflow interrupt
+ *
+ * Description:
+ * Checks the source causing an counter overflow interrupt. On success the
+ * resulting counter overflow status is written to <pStatus>, whereas the
+ * the following bit coding is used:
+ * 63:56 - unused
+ * 55:48 - TxRx interrupt register bit7:0
+ * 32:47 - Rx interrupt register
+ * 31:24 - unused
+ * 23:16 - TxRx interrupt register bit15:8
+ * 15:0 - Tx interrupt register
+ *
+ * Returns:
+ * 0: success
+ * 1: something went wrong
+ */
+int SkGmOverflowStatus(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+unsigned int Port, /* Port Index (MAC_1 + n) */
+SK_U16 IStatus, /* Interupt Status from MAC */
+SK_U64 *pStatus) /* ptr for return overflow status value */
+{
+ SK_U64 Status; /* Overflow status */
+ SK_U16 RegVal;
+
+ Status = 0;
+
+ if ((IStatus & GM_IS_RX_CO_OV) != 0) {
+ /* this register is self-clearing after read */
+ GM_IN16(IoC, Port, GM_RX_IRQ_SRC, &RegVal);
+ Status |= (SK_U64)RegVal << 32;
+ }
+
+ if ((IStatus & GM_IS_TX_CO_OV) != 0) {
+ /* this register is self-clearing after read */
+ GM_IN16(IoC, Port, GM_TX_IRQ_SRC, &RegVal);
+ Status |= (SK_U64)RegVal;
+ }
+
+ /* this register is self-clearing after read */
+ GM_IN16(IoC, Port, GM_TR_IRQ_SRC, &RegVal);
+ /* Rx overflow interrupt register bits (LoByte)*/
+ Status |= (SK_U64)((SK_U8)RegVal) << 48;
+ /* Tx overflow interrupt register bits (HiByte)*/
+ Status |= (SK_U64)(RegVal >> 8) << 16;
+
+ *pStatus = Status;
+
+ return(0);
+} /* SkGmOverflowStatus */
+
+/******************************************************************************
+ *
+ * SkGmCableDiagStatus() - Starts / Gets status of cable diagnostic test
+ *
+ * Description:
+ * starts the cable diagnostic test if 'StartTest' is true
+ * gets the results if 'StartTest' is true
+ *
+ * NOTE: this test is meaningful only when link is down
+ *
+ * Returns:
+ * 0: success
+ * 1: no YUKON copper
+ * 2: test in progress
+ */
+int SkGmCableDiagStatus(
+SK_AC *pAC, /* adapter context */
+SK_IOC IoC, /* IO context */
+int Port, /* Port Index (MAC_1 + n) */
+SK_BOOL StartTest) /* flag for start / get result */
+{
+ int i;
+ SK_U16 RegVal;
+ SK_GEPORT *pPrt;
+
+ pPrt = &pAC->GIni.GP[Port];
+
+ if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
+
+ return(1);
+ }
+
+ if (StartTest) {
+ /* only start the cable test */
+ if ((pPrt->PhyId1 & PHY_I1_REV_MSK) < 4) {
+ /* apply TDR workaround from Marvell */
+ SkGmPhyWrite(pAC, IoC, Port, 29, 0x001e);
+
+ SkGmPhyWrite(pAC, IoC, Port, 30, 0xcc00);
+ SkGmPhyWrite(pAC, IoC, Port, 30, 0xc800);
+ SkGmPhyWrite(pAC, IoC, Port, 30, 0xc400);
+ SkGmPhyWrite(pAC, IoC, Port, 30, 0xc000);
+ SkGmPhyWrite(pAC, IoC, Port, 30, 0xc100);
+ }
+
+ /* set address to 0 for MDI[0] */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, 0);
+
+ /* Read Cable Diagnostic Reg */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal);
+
+ /* start Cable Diagnostic Test */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CABLE_DIAG,
+ (SK_U16)(RegVal | PHY_M_CABD_ENA_TEST));
+
+ return(0);
+ }
+
+ /* Read Cable Diagnostic Reg */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal);
+
+ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+ ("PHY Cable Diag.=0x%04X\n", RegVal));
+
+ if ((RegVal & PHY_M_CABD_ENA_TEST) != 0) {
+ /* test is running */
+ return(2);
+ }
+
+ /* get the test results */
+ for (i = 0; i < 4; i++) {
+ /* set address to i for MDI[i] */
+ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, (SK_U16)i);
+
+ /* get Cable Diagnostic values */
+ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal);
+
+ pPrt->PMdiPairLen[i] = (SK_U8)(RegVal & PHY_M_CABD_DIST_MSK);
+
+ pPrt->PMdiPairSts[i] = (SK_U8)((RegVal & PHY_M_CABD_STAT_MSK) >> 13);
+ }
+
+ return(0);
+} /* SkGmCableDiagStatus */
+
+#endif /* CONFIG_SK98 */
+
+/* End of file */
diff --git a/drivers/net/sk98lin/u-boot_compat.h b/drivers/net/sk98lin/u-boot_compat.h
new file mode 100644
index 0000000..1e385f8
--- /dev/null
+++ b/drivers/net/sk98lin/u-boot_compat.h
@@ -0,0 +1,98 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _UBOOT_COMPAT_H__
+#define _UBOOT_COMPAT_H__
+
+
+#include <pci.h>
+#include <pci_ids.h>
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+
+#define __initdata
+#define __init
+#define __exit
+
+#define netif_stop_queue(x)
+#define netif_wake_queue(x)
+#define netif_running(x) 0
+#define unregister_netdev(x)
+#define remove_proc_entry(x,y)
+
+#define dev_addr enetaddr
+
+#define spin_lock_irqsave(x,y) y = 0;
+#define spin_lock_init(x)
+#define spin_lock(x)
+#define spin_unlock_irqrestore(x,y)
+#define spin_unlock(x)
+
+
+#define ENODEV 1
+#define EAGAIN 2
+#define EBUSY 3
+
+#define HZ CFG_HZ
+
+
+#define printk printf
+#define KERN_ERR
+#define KERN_WARNING
+#define KERN_INFO
+
+#define MOD_INC_USE_COUNT
+#define MOD_DEC_USE_COUNT
+
+
+#define kmalloc(x,y) malloc(x)
+#define kfree(x) free(x)
+#define GFP_ATOMIC 0
+
+#define pci_alloc_consistent(x,y,z) (void *)(*(dma_addr_t *)(z) = (dma_addr_t)malloc(y))
+#define pci_free_consistent(x,y,z,d) free(z)
+#define pci_dma_sync_single(x,y,z,d)
+#define pci_unmap_page(x,y,z,d)
+#define pci_unmap_single(x,y,z,d)
+#define pci_present() 1
+
+struct sk_buff
+{
+ u8 * data;
+ u32 len;
+ u8 * data_unaligned;
+};
+
+struct sk_buff * alloc_skb(u32 size, int dummy);
+void dev_kfree_skb_any(struct sk_buff *skb);
+void skb_reserve(struct sk_buff *skb, unsigned int len);
+void skb_put(struct sk_buff *skb, unsigned int len);
+
+#define dev_kfree_skb dev_kfree_skb_any
+#define dev_kfree_skb_irq dev_kfree_skb_any
+
+#define eth_copy_and_sum(dest,src,len,base) memcpy(dest->data,src,len);
+
+
+#endif /* _UBOOT_COMPAT_H__ */
diff --git a/drivers/net/sk98lin/uboot_drv.c b/drivers/net/sk98lin/uboot_drv.c
new file mode 100644
index 0000000..d02cd1b
--- /dev/null
+++ b/drivers/net/sk98lin/uboot_drv.c
@@ -0,0 +1,143 @@
+/*
+ * Driver for SysKonnect Gigabit Ethernet Server Adapters.
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+ defined(CONFIG_SK98)
+
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+#include "u-boot_compat.h"
+
+
+#define SKGE_MAX_CARDS 2
+
+
+extern int skge_probe(struct eth_device **);
+extern void SkGeIsr(int irq, void *dev_id, struct pt_regs *ptregs);
+extern void SkGeIsrOnePort(int irq, void *dev_id, struct pt_regs *ptregs);
+extern int SkGeOpen(struct eth_device *);
+extern int SkGeClose(struct eth_device *);
+extern int SkGeXmit(struct sk_buff *skb, struct eth_device *dev);
+extern void ReceiveIrq(SK_AC *pAC, RX_PORT *pRxPort, SK_BOOL SlowPathLock);
+
+static int skge_init(struct eth_device *dev, bd_t * bis);
+static int skge_send(struct eth_device *dev, volatile void *packet, int length);
+static int skge_recv(struct eth_device *dev);
+static void skge_halt(struct eth_device *dev);
+
+int skge_initialize(bd_t * bis)
+{
+ int numdev, i;
+ struct eth_device *dev[SKGE_MAX_CARDS];
+
+ numdev = skge_probe(&dev[0]);
+
+ if (numdev > SKGE_MAX_CARDS)
+ {
+ printf("ERROR: numdev > SKGE_MAX_CARDS\n");
+ }
+
+ for (i = 0; i < numdev; i++)
+ {
+ sprintf (dev[i]->name, "SK98#%d", i);
+
+ dev[i]->init = skge_init;
+ dev[i]->halt = skge_halt;
+ dev[i]->send = skge_send;
+ dev[i]->recv = skge_recv;
+
+ eth_register(dev[i]);
+ }
+
+ return numdev;
+}
+
+
+static int skge_init(struct eth_device *dev, bd_t * bis)
+{
+ int ret;
+ SK_AC * pAC = ((DEV_NET*)dev->priv)->pAC;
+ int i;
+
+ ret = SkGeOpen(dev);
+
+ while (pAC->Rlmt.Port[0].PortState != SK_RLMT_PS_GOING_UP)
+ {
+ SkGeIsrOnePort (0, pAC->dev[0], 0);
+ }
+
+ for (i = 0; i < 100; i ++)
+ {
+ udelay(1000);
+ }
+
+ return ret;
+}
+
+
+static void skge_halt(struct eth_device *dev)
+{
+ SkGeClose(dev);
+}
+
+
+static int skge_send(struct eth_device *dev, volatile void *packet,
+ int length)
+{
+ int ret = -1;
+ struct sk_buff * skb = alloc_skb(length, 0);
+
+ if (! skb)
+ {
+ printf("skge_send: failed to alloc skb\n");
+ goto Done;
+ }
+
+ memcpy(skb->data, (void*)packet, length);
+ ret = SkGeXmit(skb, dev);
+
+Done:
+ return ret;
+}
+
+
+static int skge_recv(struct eth_device *dev)
+{
+ DEV_NET *pNet;
+ SK_AC *pAC;
+ int FromPort = 0;
+
+ pNet = (DEV_NET*) dev->priv;
+ pAC = pNet->pAC;
+
+ ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE);
+
+ return 0;
+}
+
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/sk98lin/uboot_skb.c b/drivers/net/sk98lin/uboot_skb.c
new file mode 100644
index 0000000..3a487a8
--- /dev/null
+++ b/drivers/net/sk98lin/uboot_skb.c
@@ -0,0 +1,122 @@
+/*
+ * Definitions for the 'struct sk_buff' memory handlers in U-Boot.
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_SK98
+
+#include <common.h>
+#include "u-boot_compat.h"
+
+#define MAX_SKB 50
+
+static struct sk_buff *sk_table[MAX_SKB];
+
+
+struct sk_buff * alloc_skb(u32 size, int dummy)
+{
+ int i;
+ struct sk_buff * ret = NULL;
+
+ for (i = 0; i < MAX_SKB; i++)
+ {
+ if (sk_table[i])
+ {
+ /* Already allocated.
+ */
+ continue;
+ }
+
+ sk_table[i] = malloc(sizeof(struct sk_buff));
+ if (! sk_table[i])
+ {
+ printf("alloc_skb: malloc failed\n");
+ break;
+ }
+
+ memset(sk_table[i], 0, sizeof(struct sk_buff));
+ sk_table[i]->data = sk_table[i]->data_unaligned =
+ malloc(size + 16);
+ if (! sk_table[i]->data)
+ {
+ printf("alloc_skb: malloc failed\n");
+ free(sk_table[i]);
+ sk_table[i] = NULL;
+ break;
+ }
+
+ sk_table[i]->data += 16 - ((u32)sk_table[i]->data & 15);
+ sk_table[i]->len = size;
+
+ break;
+ }
+
+ if (i < MAX_SKB)
+ {
+ ret = sk_table[i];
+ }
+
+ if (! ret)
+ {
+ printf("Unable to allocate skb!\n");
+ }
+
+ return ret;
+}
+
+void dev_kfree_skb_any(struct sk_buff *skb)
+{
+ int i;
+
+ for (i = 0; i < MAX_SKB; i++)
+ {
+ if (sk_table[i] != skb)
+ {
+ continue;
+ }
+
+ free(skb->data_unaligned);
+ free(skb);
+ sk_table[i] = NULL;
+ break;
+ }
+
+ if (i == MAX_SKB)
+ {
+ printf("SKB allocation error!\n");
+ }
+}
+
+void skb_reserve(struct sk_buff *skb, unsigned int len)
+{
+ skb->data+=len;
+}
+
+void skb_put(struct sk_buff *skb, unsigned int len)
+{
+ skb->len+=len;
+}
+
+#endif /* CONFIG_SK98 */
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
new file mode 100644
index 0000000..8061f12
--- /dev/null
+++ b/drivers/net/smc91111.c
@@ -0,0 +1,1623 @@
+/*------------------------------------------------------------------------
+ . smc91111.c
+ . This is a driver for SMSC's 91C111 single-chip Ethernet device.
+ .
+ . (C) Copyright 2002
+ . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ . Rolf Offermanns <rof@sysgo.de>
+ .
+ . Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
+ . Developed by Simple Network Magic Corporation (SNMC)
+ . Copyright (C) 1996 by Erik Stahlman (ES)
+ .
+ . This program is free software; you can redistribute it and/or modify
+ . it under the terms of the GNU General Public License as published by
+ . the Free Software Foundation; either version 2 of the License, or
+ . (at your option) any later version.
+ .
+ . This program is distributed in the hope that it will be useful,
+ . but WITHOUT ANY WARRANTY; without even the implied warranty of
+ . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ . GNU General Public License for more details.
+ .
+ . You should have received a copy of the GNU General Public License
+ . along with this program; if not, write to the Free Software
+ . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ .
+ . Information contained in this file was obtained from the LAN91C111
+ . manual from SMC. To get a copy, if you really want one, you can find
+ . information under www.smsc.com.
+ .
+ .
+ . "Features" of the SMC chip:
+ . Integrated PHY/MAC for 10/100BaseT Operation
+ . Supports internal and external MII
+ . Integrated 8K packet memory
+ . EEPROM interface for configuration
+ .
+ . Arguments:
+ . io = for the base address
+ . irq = for the IRQ
+ .
+ . author:
+ . Erik Stahlman ( erik@vt.edu )
+ . Daris A Nevil ( dnevil@snmc.com )
+ .
+ .
+ . Hardware multicast code from Peter Cammaert ( pc@denkart.be )
+ .
+ . Sources:
+ . o SMSC LAN91C111 databook (www.smsc.com)
+ . o smc9194.c by Erik Stahlman
+ . o skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov )
+ .
+ . History:
+ . 06/19/03 Richard Woodruff Made u-boot environment aware and added mac addr checks.
+ . 10/17/01 Marco Hasewinkel Modify for DNP/1110
+ . 07/25/01 Woojung Huh Modify for ADS Bitsy
+ . 04/25/01 Daris A Nevil Initial public release through SMSC
+ . 03/16/01 Daris A Nevil Modified smc9194.c for use with LAN91C111
+ ----------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <command.h>
+#include <config.h>
+#include "smc91111.h"
+#include <net.h>
+
+#ifdef CONFIG_DRIVER_SMC91111
+
+/* Use power-down feature of the chip */
+#define POWER_DOWN 0
+
+#define NO_AUTOPROBE
+
+#define SMC_DEBUG 0
+
+#if SMC_DEBUG > 1
+static const char version[] =
+ "smc91111.c:v1.0 04/25/01 by Daris A Nevil (dnevil@snmc.com)\n";
+#endif
+
+/* Autonegotiation timeout in seconds */
+#ifndef CONFIG_SMC_AUTONEG_TIMEOUT
+#define CONFIG_SMC_AUTONEG_TIMEOUT 10
+#endif
+
+/*------------------------------------------------------------------------
+ .
+ . Configuration options, for the experienced user to change.
+ .
+ -------------------------------------------------------------------------*/
+
+/*
+ . Wait time for memory to be free. This probably shouldn't be
+ . tuned that much, as waiting for this means nothing else happens
+ . in the system
+*/
+#define MEMORY_WAIT_TIME 16
+
+
+#if (SMC_DEBUG > 2 )
+#define PRINTK3(args...) printf(args)
+#else
+#define PRINTK3(args...)
+#endif
+
+#if SMC_DEBUG > 1
+#define PRINTK2(args...) printf(args)
+#else
+#define PRINTK2(args...)
+#endif
+
+#ifdef SMC_DEBUG
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+
+/*------------------------------------------------------------------------
+ .
+ . The internal workings of the driver. If you are changing anything
+ . here with the SMC stuff, you should have the datasheet and know
+ . what you are doing.
+ .
+ -------------------------------------------------------------------------*/
+#define CARDNAME "LAN91C111"
+
+/* Memory sizing constant */
+#define LAN91C111_MEMORY_MULTIPLIER (1024*2)
+
+#ifndef CONFIG_SMC91111_BASE
+#define CONFIG_SMC91111_BASE 0x20000300
+#endif
+
+#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
+
+#define SMC_DEV_NAME "SMC91111"
+#define SMC_PHY_ADDR 0x0000
+#define SMC_ALLOC_MAX_TRY 5
+#define SMC_TX_TIMEOUT 30
+
+#define SMC_PHY_CLOCK_DELAY 1000
+
+#define ETH_ZLEN 60
+
+#ifdef CONFIG_SMC_USE_32_BIT
+#define USE_32_BIT 1
+#else
+#undef USE_32_BIT
+#endif
+/*-----------------------------------------------------------------
+ .
+ . The driver can be entered at any of the following entry points.
+ .
+ .------------------------------------------------------------------ */
+
+extern int eth_init(bd_t *bd);
+extern void eth_halt(void);
+extern int eth_rx(void);
+extern int eth_send(volatile void *packet, int length);
+
+#ifdef SHARED_RESOURCES
+ extern void swap_to(int device_id);
+#endif
+
+/*
+ . This is called by register_netdev(). It is responsible for
+ . checking the portlist for the SMC9000 series chipset. If it finds
+ . one, then it will initialize the device, find the hardware information,
+ . and sets up the appropriate device parameters.
+ . NOTE: Interrupts are *OFF* when this procedure is called.
+ .
+ . NB:This shouldn't be static since it is referred to externally.
+*/
+int smc_init(void);
+
+/*
+ . This is called by unregister_netdev(). It is responsible for
+ . cleaning up before the driver is finally unregistered and discarded.
+*/
+void smc_destructor(void);
+
+/*
+ . The kernel calls this function when someone wants to use the device,
+ . typically 'ifconfig ethX up'.
+*/
+static int smc_open(bd_t *bd);
+
+
+/*
+ . This is called by the kernel in response to 'ifconfig ethX down'. It
+ . is responsible for cleaning up everything that the open routine
+ . does, and maybe putting the card into a powerdown state.
+*/
+static int smc_close(void);
+
+/*
+ . Configures the PHY through the MII Management interface
+*/
+#ifndef CONFIG_SMC91111_EXT_PHY
+static void smc_phy_configure(void);
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+/*
+ . This is a separate procedure to handle the receipt of a packet, to
+ . leave the interrupt code looking slightly cleaner
+*/
+static int smc_rcv(void);
+
+/* See if a MAC address is defined in the current environment. If so use it. If not
+ . print a warning and set the environment and other globals with the default.
+ . If an EEPROM is present it really should be consulted.
+*/
+int smc_get_ethaddr(bd_t *bd);
+int get_rom_mac(uchar *v_rom_mac);
+
+/*
+ ------------------------------------------------------------
+ .
+ . Internal routines
+ .
+ ------------------------------------------------------------
+*/
+
+#ifdef CONFIG_SMC_USE_IOFUNCS
+/*
+ * input and output functions
+ *
+ * Implemented due to inx,outx macros accessing the device improperly
+ * and putting the device into an unkown state.
+ *
+ * For instance, on Sharp LPD7A400 SDK, affects were chip memory
+ * could not be free'd (hence the alloc failures), duplicate packets,
+ * packets being corrupt (shifted) on the wire, etc. Switching to the
+ * inx,outx functions fixed this problem.
+ */
+static inline word SMC_inw(dword offset);
+static inline void SMC_outw(word value, dword offset);
+static inline byte SMC_inb(dword offset);
+static inline void SMC_outb(byte value, dword offset);
+static inline void SMC_insw(dword offset, volatile uchar* buf, dword len);
+static inline void SMC_outsw(dword offset, uchar* buf, dword len);
+
+#define barrier() __asm__ __volatile__("": : :"memory")
+
+static inline word SMC_inw(dword offset)
+{
+ word v;
+ v = *((volatile word*)(SMC_BASE_ADDRESS+offset));
+ barrier(); *(volatile u32*)(0xc0000000);
+ return v;
+}
+
+static inline void SMC_outw(word value, dword offset)
+{
+ *((volatile word*)(SMC_BASE_ADDRESS+offset)) = value;
+ barrier(); *(volatile u32*)(0xc0000000);
+}
+
+static inline byte SMC_inb(dword offset)
+{
+ word _w;
+
+ _w = SMC_inw(offset & ~((dword)1));
+ return (offset & 1) ? (byte)(_w >> 8) : (byte)(_w);
+}
+
+static inline void SMC_outb(byte value, dword offset)
+{
+ word _w;
+
+ _w = SMC_inw(offset & ~((dword)1));
+ if (offset & 1)
+ *((volatile word*)(SMC_BASE_ADDRESS+(offset & ~((dword)1)))) = (value<<8) | (_w & 0x00ff);
+ else
+ *((volatile word*)(SMC_BASE_ADDRESS+offset)) = value | (_w & 0xff00);
+}
+
+static inline void SMC_insw(dword offset, volatile uchar* buf, dword len)
+{
+ volatile word *p = (volatile word *)buf;
+
+ while (len-- > 0) {
+ *p++ = SMC_inw(offset);
+ barrier();
+ *((volatile u32*)(0xc0000000));
+ }
+}
+
+static inline void SMC_outsw(dword offset, uchar* buf, dword len)
+{
+ volatile word *p = (volatile word *)buf;
+
+ while (len-- > 0) {
+ SMC_outw(*p++, offset);
+ barrier();
+ *(volatile u32*)(0xc0000000);
+ }
+}
+#endif /* CONFIG_SMC_USE_IOFUNCS */
+
+static char unsigned smc_mac_addr[6] = {0x02, 0x80, 0xad, 0x20, 0x31, 0xb8};
+
+/*
+ * This function must be called before smc_open() if you want to override
+ * the default mac address.
+ */
+
+void smc_set_mac_addr(const unsigned char *addr) {
+ int i;
+
+ for (i=0; i < sizeof(smc_mac_addr); i++){
+ smc_mac_addr[i] = addr[i];
+ }
+}
+
+/*
+ * smc_get_macaddr is no longer used. If you want to override the default
+ * mac address, call smc_get_mac_addr as a part of the board initialization.
+ */
+
+#if 0
+void smc_get_macaddr( byte *addr ) {
+ /* MAC ADDRESS AT FLASHBLOCK 1 / OFFSET 0x10 */
+ unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010);
+ int i;
+
+
+ for (i=0; i<6; i++) {
+ addr[0] = *(dnp1110_mac+0);
+ addr[1] = *(dnp1110_mac+1);
+ addr[2] = *(dnp1110_mac+2);
+ addr[3] = *(dnp1110_mac+3);
+ addr[4] = *(dnp1110_mac+4);
+ addr[5] = *(dnp1110_mac+5);
+ }
+}
+#endif /* 0 */
+
+/***********************************************
+ * Show available memory *
+ ***********************************************/
+void dump_memory_info(void)
+{
+ word mem_info;
+ word old_bank;
+
+ old_bank = SMC_inw(BANK_SELECT)&0xF;
+
+ SMC_SELECT_BANK(0);
+ mem_info = SMC_inw( MIR_REG );
+ PRINTK2("Memory: %4d available\n", (mem_info >> 8)*2048);
+
+ SMC_SELECT_BANK(old_bank);
+}
+/*
+ . A rather simple routine to print out a packet for debugging purposes.
+*/
+#if SMC_DEBUG > 2
+static void print_packet( byte *, int );
+#endif
+
+#define tx_done(dev) 1
+
+
+/* this does a soft reset on the device */
+static void smc_reset( void );
+
+/* Enable Interrupts, Receive, and Transmit */
+static void smc_enable( void );
+
+/* this puts the device in an inactive state */
+static void smc_shutdown( void );
+
+/* Routines to Read and Write the PHY Registers across the
+ MII Management Interface
+*/
+
+#ifndef CONFIG_SMC91111_EXT_PHY
+static word smc_read_phy_register(byte phyreg);
+static void smc_write_phy_register(byte phyreg, word phydata);
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+
+static int poll4int (byte mask, int timeout)
+{
+ int tmo = get_timer (0) + timeout * CFG_HZ;
+ int is_timeout = 0;
+ word old_bank = SMC_inw (BSR_REG);
+
+ PRINTK2 ("Polling...\n");
+ SMC_SELECT_BANK (2);
+ while ((SMC_inw (SMC91111_INT_REG) & mask) == 0) {
+ if (get_timer (0) >= tmo) {
+ is_timeout = 1;
+ break;
+ }
+ }
+
+ /* restore old bank selection */
+ SMC_SELECT_BANK (old_bank);
+
+ if (is_timeout)
+ return 1;
+ else
+ return 0;
+}
+
+/* Only one release command at a time, please */
+static inline void smc_wait_mmu_release_complete (void)
+{
+ int count = 0;
+
+ /* assume bank 2 selected */
+ while (SMC_inw (MMU_CMD_REG) & MC_BUSY) {
+ udelay (1); /* Wait until not busy */
+ if (++count > 200)
+ break;
+ }
+}
+
+/*
+ . Function: smc_reset( void )
+ . Purpose:
+ . This sets the SMC91111 chip to its normal state, hopefully from whatever
+ . mess that any other DOS driver has put it in.
+ .
+ . Maybe I should reset more registers to defaults in here? SOFTRST should
+ . do that for me.
+ .
+ . Method:
+ . 1. send a SOFT RESET
+ . 2. wait for it to finish
+ . 3. enable autorelease mode
+ . 4. reset the memory management unit
+ . 5. clear all interrupts
+ .
+*/
+static void smc_reset (void)
+{
+ PRINTK2 ("%s: smc_reset\n", SMC_DEV_NAME);
+
+ /* This resets the registers mostly to defaults, but doesn't
+ affect EEPROM. That seems unnecessary */
+ SMC_SELECT_BANK (0);
+ SMC_outw (RCR_SOFTRST, RCR_REG);
+
+ /* Setup the Configuration Register */
+ /* This is necessary because the CONFIG_REG is not affected */
+ /* by a soft reset */
+
+ SMC_SELECT_BANK (1);
+#if defined(CONFIG_SMC91111_EXT_PHY)
+ SMC_outw (CONFIG_DEFAULT | CONFIG_EXT_PHY, CONFIG_REG);
+#else
+ SMC_outw (CONFIG_DEFAULT, CONFIG_REG);
+#endif
+
+
+ /* Release from possible power-down state */
+ /* Configuration register is not affected by Soft Reset */
+ SMC_outw (SMC_inw (CONFIG_REG) | CONFIG_EPH_POWER_EN, CONFIG_REG);
+
+ SMC_SELECT_BANK (0);
+
+ /* this should pause enough for the chip to be happy */
+ udelay (10);
+
+ /* Disable transmit and receive functionality */
+ SMC_outw (RCR_CLEAR, RCR_REG);
+ SMC_outw (TCR_CLEAR, TCR_REG);
+
+ /* set the control register */
+ SMC_SELECT_BANK (1);
+ SMC_outw (CTL_DEFAULT, CTL_REG);
+
+ /* Reset the MMU */
+ SMC_SELECT_BANK (2);
+ smc_wait_mmu_release_complete ();
+ SMC_outw (MC_RESET, MMU_CMD_REG);
+ while (SMC_inw (MMU_CMD_REG) & MC_BUSY)
+ udelay (1); /* Wait until not busy */
+
+ /* Note: It doesn't seem that waiting for the MMU busy is needed here,
+ but this is a place where future chipsets _COULD_ break. Be wary
+ of issuing another MMU command right after this */
+
+ /* Disable all interrupts */
+ SMC_outb (0, IM_REG);
+}
+
+/*
+ . Function: smc_enable
+ . Purpose: let the chip talk to the outside work
+ . Method:
+ . 1. Enable the transmitter
+ . 2. Enable the receiver
+ . 3. Enable interrupts
+*/
+static void smc_enable()
+{
+ PRINTK2("%s: smc_enable\n", SMC_DEV_NAME);
+ SMC_SELECT_BANK( 0 );
+ /* see the header file for options in TCR/RCR DEFAULT*/
+ SMC_outw( TCR_DEFAULT, TCR_REG );
+ SMC_outw( RCR_DEFAULT, RCR_REG );
+
+ /* clear MII_DIS */
+/* smc_write_phy_register(PHY_CNTL_REG, 0x0000); */
+}
+
+/*
+ . Function: smc_shutdown
+ . Purpose: closes down the SMC91xxx chip.
+ . Method:
+ . 1. zero the interrupt mask
+ . 2. clear the enable receive flag
+ . 3. clear the enable xmit flags
+ .
+ . TODO:
+ . (1) maybe utilize power down mode.
+ . Why not yet? Because while the chip will go into power down mode,
+ . the manual says that it will wake up in response to any I/O requests
+ . in the register space. Empirical results do not show this working.
+*/
+static void smc_shutdown()
+{
+ PRINTK2(CARDNAME ": smc_shutdown\n");
+
+ /* no more interrupts for me */
+ SMC_SELECT_BANK( 2 );
+ SMC_outb( 0, IM_REG );
+
+ /* and tell the card to stay away from that nasty outside world */
+ SMC_SELECT_BANK( 0 );
+ SMC_outb( RCR_CLEAR, RCR_REG );
+ SMC_outb( TCR_CLEAR, TCR_REG );
+#ifdef SHARED_RESOURCES
+ swap_to(FLASH);
+#endif
+}
+
+
+/*
+ . Function: smc_hardware_send_packet(struct net_device * )
+ . Purpose:
+ . This sends the actual packet to the SMC9xxx chip.
+ .
+ . Algorithm:
+ . First, see if a saved_skb is available.
+ . ( this should NOT be called if there is no 'saved_skb'
+ . Now, find the packet number that the chip allocated
+ . Point the data pointers at it in memory
+ . Set the length word in the chip's memory
+ . Dump the packet to chip memory
+ . Check if a last byte is needed ( odd length packet )
+ . if so, set the control flag right
+ . Tell the card to send it
+ . Enable the transmit interrupt, so I know if it failed
+ . Free the kernel data if I actually sent it.
+*/
+static int smc_send_packet (volatile void *packet, int packet_length)
+{
+ byte packet_no;
+ unsigned long ioaddr;
+ byte *buf;
+ int length;
+ int numPages;
+ int try = 0;
+ int time_out;
+ byte status;
+ byte saved_pnr;
+ word saved_ptr;
+
+ /* save PTR and PNR registers before manipulation */
+ SMC_SELECT_BANK (2);
+ saved_pnr = SMC_inb( PN_REG );
+ saved_ptr = SMC_inw( PTR_REG );
+
+ PRINTK3 ("%s: smc_hardware_send_packet\n", SMC_DEV_NAME);
+
+ length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
+
+ /* allocate memory
+ ** The MMU wants the number of pages to be the number of 256 bytes
+ ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
+ **
+ ** The 91C111 ignores the size bits, but the code is left intact
+ ** for backwards and future compatibility.
+ **
+ ** Pkt size for allocating is data length +6 (for additional status
+ ** words, length and ctl!)
+ **
+ ** If odd size then last byte is included in this header.
+ */
+ numPages = ((length & 0xfffe) + 6);
+ numPages >>= 8; /* Divide by 256 */
+
+ if (numPages > 7) {
+ printf ("%s: Far too big packet error. \n", SMC_DEV_NAME);
+ return 0;
+ }
+
+ /* now, try to allocate the memory */
+ SMC_SELECT_BANK (2);
+ SMC_outw (MC_ALLOC | numPages, MMU_CMD_REG);
+
+ /* FIXME: the ALLOC_INT bit never gets set *
+ * so the following will always give a *
+ * memory allocation error. *
+ * same code works in armboot though *
+ * -ro
+ */
+
+again:
+ try++;
+ time_out = MEMORY_WAIT_TIME;
+ do {
+ status = SMC_inb (SMC91111_INT_REG);
+ if (status & IM_ALLOC_INT) {
+ /* acknowledge the interrupt */
+ SMC_outb (IM_ALLOC_INT, SMC91111_INT_REG);
+ break;
+ }
+ } while (--time_out);
+
+ if (!time_out) {
+ PRINTK2 ("%s: memory allocation, try %d failed ...\n",
+ SMC_DEV_NAME, try);
+ if (try < SMC_ALLOC_MAX_TRY)
+ goto again;
+ else
+ return 0;
+ }
+
+ PRINTK2 ("%s: memory allocation, try %d succeeded ...\n",
+ SMC_DEV_NAME, try);
+
+ /* I can send the packet now.. */
+
+ ioaddr = SMC_BASE_ADDRESS;
+
+ buf = (byte *) packet;
+
+ /* If I get here, I _know_ there is a packet slot waiting for me */
+ packet_no = SMC_inb (AR_REG);
+ if (packet_no & AR_FAILED) {
+ /* or isn't there? BAD CHIP! */
+ printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME);
+ return 0;
+ }
+
+ /* we have a packet address, so tell the card to use it */
+#ifndef CONFIG_XAENIAX
+ SMC_outb (packet_no, PN_REG);
+#else
+ /* On Xaeniax board, we can't use SMC_outb here because that way
+ * the Allocate MMU command will end up written to the command register
+ * as well, which will lead to a problem.
+ */
+ SMC_outl (packet_no << 16, 0);
+#endif
+ /* do not write new ptr value if Write data fifo not empty */
+ while ( saved_ptr & PTR_NOTEMPTY )
+ printf ("Write data fifo not empty!\n");
+
+ /* point to the beginning of the packet */
+ SMC_outw (PTR_AUTOINC, PTR_REG);
+
+ PRINTK3 ("%s: Trying to xmit packet of length %x\n",
+ SMC_DEV_NAME, length);
+
+#if SMC_DEBUG > 2
+ printf ("Transmitting Packet\n");
+ print_packet (buf, length);
+#endif
+
+ /* send the packet length ( +6 for status, length and ctl byte )
+ and the status word ( set to zeros ) */
+#ifdef USE_32_BIT
+ SMC_outl ((length + 6) << 16, SMC91111_DATA_REG);
+#else
+ SMC_outw (0, SMC91111_DATA_REG);
+ /* send the packet length ( +6 for status words, length, and ctl */
+ SMC_outw ((length + 6), SMC91111_DATA_REG);
+#endif
+
+ /* send the actual data
+ . I _think_ it's faster to send the longs first, and then
+ . mop up by sending the last word. It depends heavily
+ . on alignment, at least on the 486. Maybe it would be
+ . a good idea to check which is optimal? But that could take
+ . almost as much time as is saved?
+ */
+#ifdef USE_32_BIT
+ SMC_outsl (SMC91111_DATA_REG, buf, length >> 2);
+#ifndef CONFIG_XAENIAX
+ if (length & 0x2)
+ SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))),
+ SMC91111_DATA_REG);
+#else
+ /* On XANEIAX, we can only use 32-bit writes, so we need to handle
+ * unaligned tail part specially. The standard code doesn't work.
+ */
+ if ((length & 3) == 3) {
+ u16 * ptr = (u16*) &buf[length-3];
+ SMC_outl((*ptr) | ((0x2000 | buf[length-1]) << 16),
+ SMC91111_DATA_REG);
+ } else if ((length & 2) == 2) {
+ u16 * ptr = (u16*) &buf[length-2];
+ SMC_outl(*ptr, SMC91111_DATA_REG);
+ } else if (length & 1) {
+ SMC_outl((0x2000 | buf[length-1]), SMC91111_DATA_REG);
+ } else {
+ SMC_outl(0, SMC91111_DATA_REG);
+ }
+#endif
+#else
+ SMC_outsw (SMC91111_DATA_REG, buf, (length) >> 1);
+#endif /* USE_32_BIT */
+
+#ifndef CONFIG_XAENIAX
+ /* Send the last byte, if there is one. */
+ if ((length & 1) == 0) {
+ SMC_outw (0, SMC91111_DATA_REG);
+ } else {
+ SMC_outw (buf[length - 1] | 0x2000, SMC91111_DATA_REG);
+ }
+#endif
+
+ /* and let the chipset deal with it */
+ SMC_outw (MC_ENQUEUE, MMU_CMD_REG);
+
+ /* poll for TX INT */
+ /* if (poll4int (IM_TX_INT, SMC_TX_TIMEOUT)) { */
+ /* poll for TX_EMPTY INT - autorelease enabled */
+ if (poll4int(IM_TX_EMPTY_INT, SMC_TX_TIMEOUT)) {
+ /* sending failed */
+ PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME);
+
+ /* release packet */
+ /* no need to release, MMU does that now */
+#ifdef CONFIG_XAENIAX
+ SMC_outw (MC_FREEPKT, MMU_CMD_REG);
+#endif
+
+ /* wait for MMU getting ready (low) */
+ while (SMC_inw (MMU_CMD_REG) & MC_BUSY) {
+ udelay (10);
+ }
+
+ PRINTK2 ("MMU ready\n");
+
+
+ return 0;
+ } else {
+ /* ack. int */
+ SMC_outb (IM_TX_EMPTY_INT, SMC91111_INT_REG);
+ /* SMC_outb (IM_TX_INT, SMC91111_INT_REG); */
+ PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME,
+ length);
+
+ /* release packet */
+ /* no need to release, MMU does that now */
+#ifdef CONFIG_XAENIAX
+ SMC_outw (MC_FREEPKT, MMU_CMD_REG);
+#endif
+
+ /* wait for MMU getting ready (low) */
+ while (SMC_inw (MMU_CMD_REG) & MC_BUSY) {
+ udelay (10);
+ }
+
+ PRINTK2 ("MMU ready\n");
+
+
+ }
+
+ /* restore previously saved registers */
+#ifndef CONFIG_XAENIAX
+ SMC_outb( saved_pnr, PN_REG );
+#else
+ /* On Xaeniax board, we can't use SMC_outb here because that way
+ * the Allocate MMU command will end up written to the command register
+ * as well, which will lead to a problem.
+ */
+ SMC_outl(saved_pnr << 16, 0);
+#endif
+ SMC_outw( saved_ptr, PTR_REG );
+
+ return length;
+}
+
+/*-------------------------------------------------------------------------
+ |
+ | smc_destructor( struct net_device * dev )
+ | Input parameters:
+ | dev, pointer to the device structure
+ |
+ | Output:
+ | None.
+ |
+ ---------------------------------------------------------------------------
+*/
+void smc_destructor()
+{
+ PRINTK2(CARDNAME ": smc_destructor\n");
+}
+
+
+/*
+ * Open and Initialize the board
+ *
+ * Set up everything, reset the card, etc ..
+ *
+ */
+static int smc_open (bd_t * bd)
+{
+ int i, err;
+
+ PRINTK2 ("%s: smc_open\n", SMC_DEV_NAME);
+
+ /* reset the hardware */
+ smc_reset ();
+ smc_enable ();
+
+ /* Configure the PHY */
+#ifndef CONFIG_SMC91111_EXT_PHY
+ smc_phy_configure ();
+#endif
+
+ /* conservative setting (10Mbps, HalfDuplex, no AutoNeg.) */
+/* SMC_SELECT_BANK(0); */
+/* SMC_outw(0, RPC_REG); */
+ SMC_SELECT_BANK (1);
+
+ err = smc_get_ethaddr (bd); /* set smc_mac_addr, and sync it with u-boot globals */
+ if (err < 0) {
+ memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */
+ return (-1); /* upper code ignores this, but NOT bi_enetaddr */
+ }
+#ifdef USE_32_BIT
+ for (i = 0; i < 6; i += 2) {
+ word address;
+
+ address = smc_mac_addr[i + 1] << 8;
+ address |= smc_mac_addr[i];
+ SMC_outw (address, (ADDR0_REG + i));
+ }
+#else
+ for (i = 0; i < 6; i++)
+ SMC_outb (smc_mac_addr[i], (ADDR0_REG + i));
+#endif
+
+ return 0;
+}
+
+/*-------------------------------------------------------------
+ .
+ . smc_rcv - receive a packet from the card
+ .
+ . There is ( at least ) a packet waiting to be read from
+ . chip-memory.
+ .
+ . o Read the status
+ . o If an error, record it
+ . o otherwise, read in the packet
+ --------------------------------------------------------------
+*/
+static int smc_rcv()
+{
+ int packet_number;
+ word status;
+ word packet_length;
+ int is_error = 0;
+#ifdef USE_32_BIT
+ dword stat_len;
+#endif
+ byte saved_pnr;
+ word saved_ptr;
+
+ SMC_SELECT_BANK(2);
+ /* save PTR and PTR registers */
+ saved_pnr = SMC_inb( PN_REG );
+ saved_ptr = SMC_inw( PTR_REG );
+
+ packet_number = SMC_inw( RXFIFO_REG );
+
+ if ( packet_number & RXFIFO_REMPTY ) {
+
+ return 0;
+ }
+
+ PRINTK3("%s: smc_rcv\n", SMC_DEV_NAME);
+ /* start reading from the start of the packet */
+ SMC_outw( PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG );
+
+ /* First two words are status and packet_length */
+#ifdef USE_32_BIT
+ stat_len = SMC_inl(SMC91111_DATA_REG);
+ status = stat_len & 0xffff;
+ packet_length = stat_len >> 16;
+#else
+ status = SMC_inw( SMC91111_DATA_REG );
+ packet_length = SMC_inw( SMC91111_DATA_REG );
+#endif
+
+ packet_length &= 0x07ff; /* mask off top bits */
+
+ PRINTK2("RCV: STATUS %4x LENGTH %4x\n", status, packet_length );
+
+ if ( !(status & RS_ERRORS ) ){
+ /* Adjust for having already read the first two words */
+ packet_length -= 4; /*4; */
+
+
+ /* set odd length for bug in LAN91C111, */
+ /* which never sets RS_ODDFRAME */
+ /* TODO ? */
+
+
+#ifdef USE_32_BIT
+ PRINTK3(" Reading %d dwords (and %d bytes) \n",
+ packet_length >> 2, packet_length & 3 );
+ /* QUESTION: Like in the TX routine, do I want
+ to send the DWORDs or the bytes first, or some
+ mixture. A mixture might improve already slow PIO
+ performance */
+ SMC_insl( SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 2 );
+ /* read the left over bytes */
+ if (packet_length & 3) {
+ int i;
+
+ byte *tail = (byte *)(NetRxPackets[0] + (packet_length & ~3));
+ dword leftover = SMC_inl(SMC91111_DATA_REG);
+ for (i=0; i<(packet_length & 3); i++)
+ *tail++ = (byte) (leftover >> (8*i)) & 0xff;
+ }
+#else
+ PRINTK3(" Reading %d words and %d byte(s) \n",
+ (packet_length >> 1 ), packet_length & 1 );
+ SMC_insw(SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 1);
+
+#endif /* USE_32_BIT */
+
+#if SMC_DEBUG > 2
+ printf("Receiving Packet\n");
+ print_packet( NetRxPackets[0], packet_length );
+#endif
+ } else {
+ /* error ... */
+ /* TODO ? */
+ is_error = 1;
+ }
+
+ while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY )
+ udelay(1); /* Wait until not busy */
+
+ /* error or good, tell the card to get rid of this packet */
+ SMC_outw( MC_RELEASE, MMU_CMD_REG );
+
+ while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY )
+ udelay(1); /* Wait until not busy */
+
+ /* restore saved registers */
+#ifndef CONFIG_XAENIAX
+ SMC_outb( saved_pnr, PN_REG );
+#else
+ /* On Xaeniax board, we can't use SMC_outb here because that way
+ * the Allocate MMU command will end up written to the command register
+ * as well, which will lead to a problem.
+ */
+ SMC_outl( saved_pnr << 16, 0);
+#endif
+ SMC_outw( saved_ptr, PTR_REG );
+
+ if (!is_error) {
+ /* Pass the packet up to the protocol layers. */
+ NetReceive(NetRxPackets[0], packet_length);
+ return packet_length;
+ } else {
+ return 0;
+ }
+
+}
+
+
+/*----------------------------------------------------
+ . smc_close
+ .
+ . this makes the board clean up everything that it can
+ . and not talk to the outside world. Caused by
+ . an 'ifconfig ethX down'
+ .
+ -----------------------------------------------------*/
+static int smc_close()
+{
+ PRINTK2("%s: smc_close\n", SMC_DEV_NAME);
+
+ /* clear everything */
+ smc_shutdown();
+
+ return 0;
+}
+
+
+#if 0
+/*------------------------------------------------------------
+ . Modify a bit in the LAN91C111 register set
+ .-------------------------------------------------------------*/
+static word smc_modify_regbit(int bank, int ioaddr, int reg,
+ unsigned int bit, int val)
+{
+ word regval;
+
+ SMC_SELECT_BANK( bank );
+
+ regval = SMC_inw( reg );
+ if (val)
+ regval |= bit;
+ else
+ regval &= ~bit;
+
+ SMC_outw( regval, 0 );
+ return(regval);
+}
+
+
+/*------------------------------------------------------------
+ . Retrieve a bit in the LAN91C111 register set
+ .-------------------------------------------------------------*/
+static int smc_get_regbit(int bank, int ioaddr, int reg, unsigned int bit)
+{
+ SMC_SELECT_BANK( bank );
+ if ( SMC_inw( reg ) & bit)
+ return(1);
+ else
+ return(0);
+}
+
+
+/*------------------------------------------------------------
+ . Modify a LAN91C111 register (word access only)
+ .-------------------------------------------------------------*/
+static void smc_modify_reg(int bank, int ioaddr, int reg, word val)
+{
+ SMC_SELECT_BANK( bank );
+ SMC_outw( val, reg );
+}
+
+
+/*------------------------------------------------------------
+ . Retrieve a LAN91C111 register (word access only)
+ .-------------------------------------------------------------*/
+static int smc_get_reg(int bank, int ioaddr, int reg)
+{
+ SMC_SELECT_BANK( bank );
+ return(SMC_inw( reg ));
+}
+
+#endif /* 0 */
+
+/*---PHY CONTROL AND CONFIGURATION----------------------------------------- */
+
+#if (SMC_DEBUG > 2 )
+
+/*------------------------------------------------------------
+ . Debugging function for viewing MII Management serial bitstream
+ .-------------------------------------------------------------*/
+static void smc_dump_mii_stream (byte * bits, int size)
+{
+ int i;
+
+ printf ("BIT#:");
+ for (i = 0; i < size; ++i) {
+ printf ("%d", i % 10);
+ }
+
+ printf ("\nMDOE:");
+ for (i = 0; i < size; ++i) {
+ if (bits[i] & MII_MDOE)
+ printf ("1");
+ else
+ printf ("0");
+ }
+
+ printf ("\nMDO :");
+ for (i = 0; i < size; ++i) {
+ if (bits[i] & MII_MDO)
+ printf ("1");
+ else
+ printf ("0");
+ }
+
+ printf ("\nMDI :");
+ for (i = 0; i < size; ++i) {
+ if (bits[i] & MII_MDI)
+ printf ("1");
+ else
+ printf ("0");
+ }
+
+ printf ("\n");
+}
+#endif
+
+/*------------------------------------------------------------
+ . Reads a register from the MII Management serial interface
+ .-------------------------------------------------------------*/
+#ifndef CONFIG_SMC91111_EXT_PHY
+static word smc_read_phy_register (byte phyreg)
+{
+ int oldBank;
+ int i;
+ byte mask;
+ word mii_reg;
+ byte bits[64];
+ int clk_idx = 0;
+ int input_idx;
+ word phydata;
+ byte phyaddr = SMC_PHY_ADDR;
+
+ /* 32 consecutive ones on MDO to establish sync */
+ for (i = 0; i < 32; ++i)
+ bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+ /* Start code <01> */
+ bits[clk_idx++] = MII_MDOE;
+ bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+ /* Read command <10> */
+ bits[clk_idx++] = MII_MDOE | MII_MDO;
+ bits[clk_idx++] = MII_MDOE;
+
+ /* Output the PHY address, msb first */
+ mask = (byte) 0x10;
+ for (i = 0; i < 5; ++i) {
+ if (phyaddr & mask)
+ bits[clk_idx++] = MII_MDOE | MII_MDO;
+ else
+ bits[clk_idx++] = MII_MDOE;
+
+ /* Shift to next lowest bit */
+ mask >>= 1;
+ }
+
+ /* Output the phy register number, msb first */
+ mask = (byte) 0x10;
+ for (i = 0; i < 5; ++i) {
+ if (phyreg & mask)
+ bits[clk_idx++] = MII_MDOE | MII_MDO;
+ else
+ bits[clk_idx++] = MII_MDOE;
+
+ /* Shift to next lowest bit */
+ mask >>= 1;
+ }
+
+ /* Tristate and turnaround (2 bit times) */
+ bits[clk_idx++] = 0;
+ /*bits[clk_idx++] = 0; */
+
+ /* Input starts at this bit time */
+ input_idx = clk_idx;
+
+ /* Will input 16 bits */
+ for (i = 0; i < 16; ++i)
+ bits[clk_idx++] = 0;
+
+ /* Final clock bit */
+ bits[clk_idx++] = 0;
+
+ /* Save the current bank */
+ oldBank = SMC_inw (BANK_SELECT);
+
+ /* Select bank 3 */
+ SMC_SELECT_BANK (3);
+
+ /* Get the current MII register value */
+ mii_reg = SMC_inw (MII_REG);
+
+ /* Turn off all MII Interface bits */
+ mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO);
+
+ /* Clock all 64 cycles */
+ for (i = 0; i < sizeof bits; ++i) {
+ /* Clock Low - output data */
+ SMC_outw (mii_reg | bits[i], MII_REG);
+ udelay (SMC_PHY_CLOCK_DELAY);
+
+
+ /* Clock Hi - input data */
+ SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG);
+ udelay (SMC_PHY_CLOCK_DELAY);
+ bits[i] |= SMC_inw (MII_REG) & MII_MDI;
+ }
+
+ /* Return to idle state */
+ /* Set clock to low, data to low, and output tristated */
+ SMC_outw (mii_reg, MII_REG);
+ udelay (SMC_PHY_CLOCK_DELAY);
+
+ /* Restore original bank select */
+ SMC_SELECT_BANK (oldBank);
+
+ /* Recover input data */
+ phydata = 0;
+ for (i = 0; i < 16; ++i) {
+ phydata <<= 1;
+
+ if (bits[input_idx++] & MII_MDI)
+ phydata |= 0x0001;
+ }
+
+#if (SMC_DEBUG > 2 )
+ printf ("smc_read_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
+ phyaddr, phyreg, phydata);
+ smc_dump_mii_stream (bits, sizeof bits);
+#endif
+
+ return (phydata);
+}
+
+
+/*------------------------------------------------------------
+ . Writes a register to the MII Management serial interface
+ .-------------------------------------------------------------*/
+static void smc_write_phy_register (byte phyreg, word phydata)
+{
+ int oldBank;
+ int i;
+ word mask;
+ word mii_reg;
+ byte bits[65];
+ int clk_idx = 0;
+ byte phyaddr = SMC_PHY_ADDR;
+
+ /* 32 consecutive ones on MDO to establish sync */
+ for (i = 0; i < 32; ++i)
+ bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+ /* Start code <01> */
+ bits[clk_idx++] = MII_MDOE;
+ bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+ /* Write command <01> */
+ bits[clk_idx++] = MII_MDOE;
+ bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+ /* Output the PHY address, msb first */
+ mask = (byte) 0x10;
+ for (i = 0; i < 5; ++i) {
+ if (phyaddr & mask)
+ bits[clk_idx++] = MII_MDOE | MII_MDO;
+ else
+ bits[clk_idx++] = MII_MDOE;
+
+ /* Shift to next lowest bit */
+ mask >>= 1;
+ }
+
+ /* Output the phy register number, msb first */
+ mask = (byte) 0x10;
+ for (i = 0; i < 5; ++i) {
+ if (phyreg & mask)
+ bits[clk_idx++] = MII_MDOE | MII_MDO;
+ else
+ bits[clk_idx++] = MII_MDOE;
+
+ /* Shift to next lowest bit */
+ mask >>= 1;
+ }
+
+ /* Tristate and turnaround (2 bit times) */
+ bits[clk_idx++] = 0;
+ bits[clk_idx++] = 0;
+
+ /* Write out 16 bits of data, msb first */
+ mask = 0x8000;
+ for (i = 0; i < 16; ++i) {
+ if (phydata & mask)
+ bits[clk_idx++] = MII_MDOE | MII_MDO;
+ else
+ bits[clk_idx++] = MII_MDOE;
+
+ /* Shift to next lowest bit */
+ mask >>= 1;
+ }
+
+ /* Final clock bit (tristate) */
+ bits[clk_idx++] = 0;
+
+ /* Save the current bank */
+ oldBank = SMC_inw (BANK_SELECT);
+
+ /* Select bank 3 */
+ SMC_SELECT_BANK (3);
+
+ /* Get the current MII register value */
+ mii_reg = SMC_inw (MII_REG);
+
+ /* Turn off all MII Interface bits */
+ mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO);
+
+ /* Clock all cycles */
+ for (i = 0; i < sizeof bits; ++i) {
+ /* Clock Low - output data */
+ SMC_outw (mii_reg | bits[i], MII_REG);
+ udelay (SMC_PHY_CLOCK_DELAY);
+
+
+ /* Clock Hi - input data */
+ SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG);
+ udelay (SMC_PHY_CLOCK_DELAY);
+ bits[i] |= SMC_inw (MII_REG) & MII_MDI;
+ }
+
+ /* Return to idle state */
+ /* Set clock to low, data to low, and output tristated */
+ SMC_outw (mii_reg, MII_REG);
+ udelay (SMC_PHY_CLOCK_DELAY);
+
+ /* Restore original bank select */
+ SMC_SELECT_BANK (oldBank);
+
+#if (SMC_DEBUG > 2 )
+ printf ("smc_write_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
+ phyaddr, phyreg, phydata);
+ smc_dump_mii_stream (bits, sizeof bits);
+#endif
+}
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+
+/*------------------------------------------------------------
+ . Waits the specified number of milliseconds - kernel friendly
+ .-------------------------------------------------------------*/
+#ifndef CONFIG_SMC91111_EXT_PHY
+static void smc_wait_ms(unsigned int ms)
+{
+ udelay(ms*1000);
+}
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+
+/*------------------------------------------------------------
+ . Configures the specified PHY using Autonegotiation. Calls
+ . smc_phy_fixed() if the user has requested a certain config.
+ .-------------------------------------------------------------*/
+#ifndef CONFIG_SMC91111_EXT_PHY
+static void smc_phy_configure ()
+{
+ int timeout;
+ byte phyaddr;
+ word my_phy_caps; /* My PHY capabilities */
+ word my_ad_caps; /* My Advertised capabilities */
+ word status = 0; /*;my status = 0 */
+ int failed = 0;
+
+ PRINTK3 ("%s: smc_program_phy()\n", SMC_DEV_NAME);
+
+
+ /* Get the detected phy address */
+ phyaddr = SMC_PHY_ADDR;
+
+ /* Reset the PHY, setting all other bits to zero */
+ smc_write_phy_register (PHY_CNTL_REG, PHY_CNTL_RST);
+
+ /* Wait for the reset to complete, or time out */
+ timeout = 6; /* Wait up to 3 seconds */
+ while (timeout--) {
+ if (!(smc_read_phy_register (PHY_CNTL_REG)
+ & PHY_CNTL_RST)) {
+ /* reset complete */
+ break;
+ }
+
+ smc_wait_ms (500); /* wait 500 millisecs */
+ }
+
+ if (timeout < 1) {
+ printf ("%s:PHY reset timed out\n", SMC_DEV_NAME);
+ goto smc_phy_configure_exit;
+ }
+
+ /* Read PHY Register 18, Status Output */
+ /* lp->lastPhy18 = smc_read_phy_register(PHY_INT_REG); */
+
+ /* Enable PHY Interrupts (for register 18) */
+ /* Interrupts listed here are disabled */
+ smc_write_phy_register (PHY_MASK_REG, 0xffff);
+
+ /* Configure the Receive/Phy Control register */
+ SMC_SELECT_BANK (0);
+ SMC_outw (RPC_DEFAULT, RPC_REG);
+
+ /* Copy our capabilities from PHY_STAT_REG to PHY_AD_REG */
+ my_phy_caps = smc_read_phy_register (PHY_STAT_REG);
+ my_ad_caps = PHY_AD_CSMA; /* I am CSMA capable */
+
+ if (my_phy_caps & PHY_STAT_CAP_T4)
+ my_ad_caps |= PHY_AD_T4;
+
+ if (my_phy_caps & PHY_STAT_CAP_TXF)
+ my_ad_caps |= PHY_AD_TX_FDX;
+
+ if (my_phy_caps & PHY_STAT_CAP_TXH)
+ my_ad_caps |= PHY_AD_TX_HDX;
+
+ if (my_phy_caps & PHY_STAT_CAP_TF)
+ my_ad_caps |= PHY_AD_10_FDX;
+
+ if (my_phy_caps & PHY_STAT_CAP_TH)
+ my_ad_caps |= PHY_AD_10_HDX;
+
+ /* Update our Auto-Neg Advertisement Register */
+ smc_write_phy_register (PHY_AD_REG, my_ad_caps);
+
+ /* Read the register back. Without this, it appears that when */
+ /* auto-negotiation is restarted, sometimes it isn't ready and */
+ /* the link does not come up. */
+ smc_read_phy_register(PHY_AD_REG);
+
+ PRINTK2 ("%s: phy caps=%x\n", SMC_DEV_NAME, my_phy_caps);
+ PRINTK2 ("%s: phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);
+
+ /* Restart auto-negotiation process in order to advertise my caps */
+ smc_write_phy_register (PHY_CNTL_REG,
+ PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST);
+
+ /* Wait for the auto-negotiation to complete. This may take from */
+ /* 2 to 3 seconds. */
+ /* Wait for the reset to complete, or time out */
+ timeout = CONFIG_SMC_AUTONEG_TIMEOUT * 2;
+ while (timeout--) {
+
+ status = smc_read_phy_register (PHY_STAT_REG);
+ if (status & PHY_STAT_ANEG_ACK) {
+ /* auto-negotiate complete */
+ break;
+ }
+
+ smc_wait_ms (500); /* wait 500 millisecs */
+
+ /* Restart auto-negotiation if remote fault */
+ if (status & PHY_STAT_REM_FLT) {
+ printf ("%s: PHY remote fault detected\n",
+ SMC_DEV_NAME);
+
+ /* Restart auto-negotiation */
+ printf ("%s: PHY restarting auto-negotiation\n",
+ SMC_DEV_NAME);
+ smc_write_phy_register (PHY_CNTL_REG,
+ PHY_CNTL_ANEG_EN |
+ PHY_CNTL_ANEG_RST |
+ PHY_CNTL_SPEED |
+ PHY_CNTL_DPLX);
+ }
+ }
+
+ if (timeout < 1) {
+ printf ("%s: PHY auto-negotiate timed out\n", SMC_DEV_NAME);
+ failed = 1;
+ }
+
+ /* Fail if we detected an auto-negotiate remote fault */
+ if (status & PHY_STAT_REM_FLT) {
+ printf ("%s: PHY remote fault detected\n", SMC_DEV_NAME);
+ failed = 1;
+ }
+
+ /* Re-Configure the Receive/Phy Control register */
+ SMC_outw (RPC_DEFAULT, RPC_REG);
+
+smc_phy_configure_exit: ;
+
+}
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+
+#if SMC_DEBUG > 2
+static void print_packet( byte * buf, int length )
+{
+ int i;
+ int remainder;
+ int lines;
+
+ printf("Packet of length %d \n", length );
+
+#if SMC_DEBUG > 3
+ lines = length / 16;
+ remainder = length % 16;
+
+ for ( i = 0; i < lines ; i ++ ) {
+ int cur;
+
+ for ( cur = 0; cur < 8; cur ++ ) {
+ byte a, b;
+
+ a = *(buf ++ );
+ b = *(buf ++ );
+ printf("%02x%02x ", a, b );
+ }
+ printf("\n");
+ }
+ for ( i = 0; i < remainder/2 ; i++ ) {
+ byte a, b;
+
+ a = *(buf ++ );
+ b = *(buf ++ );
+ printf("%02x%02x ", a, b );
+ }
+ printf("\n");
+#endif
+}
+#endif
+
+int eth_init(bd_t *bd) {
+#ifdef SHARED_RESOURCES
+ swap_to(ETHERNET);
+#endif
+ return (smc_open(bd));
+}
+
+void eth_halt() {
+ smc_close();
+}
+
+int eth_rx() {
+ return smc_rcv();
+}
+
+int eth_send(volatile void *packet, int length) {
+ return smc_send_packet(packet, length);
+}
+
+int smc_get_ethaddr (bd_t * bd)
+{
+ int env_size, rom_valid, env_present = 0, reg;
+ char *s = NULL, *e, es[] = "11:22:33:44:55:66";
+ char s_env_mac[64];
+ uchar v_env_mac[6], v_rom_mac[6], *v_mac;
+
+ env_size = getenv_r ("ethaddr", s_env_mac, sizeof (s_env_mac));
+ if ((env_size > 0) && (env_size < sizeof (es))) { /* exit if env is bad */
+ printf ("\n*** ERROR: ethaddr is not set properly!!\n");
+ return (-1);
+ }
+
+ if (env_size > 0) {
+ env_present = 1;
+ s = s_env_mac;
+ }
+
+ for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */
+ v_env_mac[reg] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+
+ rom_valid = get_rom_mac (v_rom_mac); /* get ROM mac value if any */
+
+ if (!env_present) { /* if NO env */
+ if (rom_valid) { /* but ROM is valid */
+ v_mac = v_rom_mac;
+ sprintf (s_env_mac, "%02X:%02X:%02X:%02X:%02X:%02X",
+ v_mac[0], v_mac[1], v_mac[2], v_mac[3],
+ v_mac[4], v_mac[5]);
+ setenv ("ethaddr", s_env_mac);
+ } else { /* no env, bad ROM */
+ printf ("\n*** ERROR: ethaddr is NOT set !!\n");
+ return (-1);
+ }
+ } else { /* good env, don't care ROM */
+ v_mac = v_env_mac; /* always use a good env over a ROM */
+ }
+
+ if (env_present && rom_valid) { /* if both env and ROM are good */
+ if (memcmp (v_env_mac, v_rom_mac, 6) != 0) {
+ printf ("\nWarning: MAC addresses don't match:\n");
+ printf ("\tHW MAC address: "
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ v_rom_mac[0], v_rom_mac[1],
+ v_rom_mac[2], v_rom_mac[3],
+ v_rom_mac[4], v_rom_mac[5] );
+ printf ("\t\"ethaddr\" value: "
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ v_env_mac[0], v_env_mac[1],
+ v_env_mac[2], v_env_mac[3],
+ v_env_mac[4], v_env_mac[5]) ;
+ debug ("### Set MAC addr from environment\n");
+ }
+ }
+ memcpy (bd->bi_enetaddr, v_mac, 6); /* update global address to match env (allows env changing) */
+ smc_set_mac_addr ((uchar *)v_mac); /* use old function to update smc default */
+ PRINTK("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", v_mac[0], v_mac[1],
+ v_mac[2], v_mac[3], v_mac[4], v_mac[5]);
+ return (0);
+}
+
+int get_rom_mac (uchar *v_rom_mac)
+{
+#ifdef HARDCODE_MAC /* used for testing or to supress run time warnings */
+ char hw_mac_addr[] = { 0x02, 0x80, 0xad, 0x20, 0x31, 0xb8 };
+
+ memcpy (v_rom_mac, hw_mac_addr, 6);
+ return (1);
+#else
+ int i;
+ int valid_mac = 0;
+
+ SMC_SELECT_BANK (1);
+ for (i=0; i<6; i++)
+ {
+ v_rom_mac[i] = SMC_inb ((ADDR0_REG + i));
+ valid_mac |= v_rom_mac[i];
+ }
+
+ return (valid_mac ? 1 : 0);
+#endif
+}
+#endif /* CONFIG_DRIVER_SMC91111 */
diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h
new file mode 100644
index 0000000..d03cbc3
--- /dev/null
+++ b/drivers/net/smc91111.h
@@ -0,0 +1,719 @@
+/*------------------------------------------------------------------------
+ . smc91111.h - macros for the LAN91C111 Ethernet Driver
+ .
+ . (C) Copyright 2002
+ . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ . Rolf Offermanns <rof@sysgo.de>
+ . Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
+ . Developed by Simple Network Magic Corporation (SNMC)
+ . Copyright (C) 1996 by Erik Stahlman (ES)
+ .
+ . This program is free software; you can redistribute it and/or modify
+ . it under the terms of the GNU General Public License as published by
+ . the Free Software Foundation; either version 2 of the License, or
+ . (at your option) any later version.
+ .
+ . This program is distributed in the hope that it will be useful,
+ . but WITHOUT ANY WARRANTY; without even the implied warranty of
+ . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ . GNU General Public License for more details.
+ .
+ . You should have received a copy of the GNU General Public License
+ . along with this program; if not, write to the Free Software
+ . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ .
+ . This file contains register information and access macros for
+ . the LAN91C111 single chip ethernet controller. It is a modified
+ . version of the smc9194.h file.
+ .
+ . Information contained in this file was obtained from the LAN91C111
+ . manual from SMC. To get a copy, if you really want one, you can find
+ . information under www.smsc.com.
+ .
+ . Authors
+ . Erik Stahlman ( erik@vt.edu )
+ . Daris A Nevil ( dnevil@snmc.com )
+ .
+ . History
+ . 03/16/01 Daris A Nevil Modified for use with LAN91C111 device
+ .
+ ---------------------------------------------------------------------------*/
+#ifndef _SMC91111_H_
+#define _SMC91111_H_
+
+#include <asm/types.h>
+#include <config.h>
+
+/*
+ * This function may be called by the board specific initialisation code
+ * in order to override the default mac address.
+ */
+
+void smc_set_mac_addr (const unsigned char *addr);
+
+
+/* I want some simple types */
+
+typedef unsigned char byte;
+typedef unsigned short word;
+typedef unsigned long int dword;
+
+/*
+ . DEBUGGING LEVELS
+ .
+ . 0 for normal operation
+ . 1 for slightly more details
+ . >2 for various levels of increasingly useless information
+ . 2 for interrupt tracking, status flags
+ . 3 for packet info
+ . 4 for complete packet dumps
+*/
+/*#define SMC_DEBUG 0 */
+
+/* Because of bank switching, the LAN91xxx uses only 16 I/O ports */
+
+#define SMC_IO_EXTENT 16
+
+#ifdef CONFIG_PXA250
+
+#ifdef CONFIG_XSENGINE
+#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1))))
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r<<1))))
+#define SMC_inb(p) ({ \
+ unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p<<1)); \
+ unsigned int __v = *(volatile unsigned short *)((__p) & ~2); \
+ if (__p & 2) __v >>= 8; \
+ else __v &= 0xff; \
+ __v; })
+#elif defined(CONFIG_XAENIAX)
+#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inw(z) ({ \
+ unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (z)); \
+ unsigned int __v = *(volatile unsigned int *)((__p) & ~3); \
+ if (__p & 3) __v >>= 16; \
+ else __v &= 0xffff; \
+ __v; })
+#define SMC_inb(p) ({ \
+ unsigned int ___v = SMC_inw((p) & ~1); \
+ if (p & 1) ___v >>= 8; \
+ else ___v &= 0xff; \
+ ___v; })
+#else
+#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inb(p) ({ \
+ unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p)); \
+ unsigned int __v = *(volatile unsigned short *)((__p) & ~1); \
+ if (__p & 1) __v >>= 8; \
+ else __v &= 0xff; \
+ __v; })
+#endif
+
+#ifdef CONFIG_XSENGINE
+#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1))) = d)
+#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r<<1))) = d)
+#elif defined (CONFIG_XAENIAX)
+#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))) = d)
+#define SMC_outw(d,p) ({ \
+ dword __dwo = SMC_inl((p) & ~3); \
+ dword __dwn = (word)(d); \
+ __dwo &= ((p) & 3) ? 0x0000ffff : 0xffff0000; \
+ __dwo |= ((p) & 3) ? __dwn << 16 : __dwn; \
+ SMC_outl(__dwo, (p) & ~3); \
+})
+#else
+#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))) = d)
+#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d)
+#endif
+
+#define SMC_outb(d,r) ({ word __d = (byte)(d); \
+ word __w = SMC_inw((r)&~1); \
+ __w &= ((r)&1) ? 0x00FF : 0xFF00; \
+ __w |= ((r)&1) ? __d<<8 : __d; \
+ SMC_outw(__w,(r)&~1); \
+ })
+
+#define SMC_outsl(r,b,l) ({ int __i; \
+ dword *__b2; \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outl( *(__b2 + __i), r); \
+ } \
+ })
+
+#define SMC_outsw(r,b,l) ({ int __i; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outw( *(__b2 + __i), r); \
+ } \
+ })
+
+#define SMC_insl(r,b,l) ({ int __i ; \
+ dword *__b2; \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inl(r); \
+ SMC_inl(0); \
+ }; \
+ })
+
+#define SMC_insw(r,b,l) ({ int __i ; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inw(r); \
+ SMC_inw(0); \
+ }; \
+ })
+
+#define SMC_insb(r,b,l) ({ int __i ; \
+ byte *__b2; \
+ __b2 = (byte *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inb(r); \
+ SMC_inb(0); \
+ }; \
+ })
+
+#else /* if not CONFIG_PXA250 */
+
+#ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */
+/*
+ * We have only 16 Bit PCMCIA access on Socket 0
+ */
+
+#ifdef CONFIG_ADNPESC1
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+((r)<<1))))
+#elif CONFIG_BLACKFIN
+#define SMC_inw(r) ({ word __v = (*((volatile word *)(SMC_BASE_ADDRESS+(r)))); asm("ssync;"); __v;})
+#else
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
+#endif
+#define SMC_inb(r) (((r)&1) ? SMC_inw((r)&~1)>>8 : SMC_inw(r)&0xFF)
+
+#ifdef CONFIG_ADNPESC1
+#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+((r)<<1))) = d)
+#elif CONFIG_BLACKFIN
+#define SMC_outw(d,r) {(*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d);asm("ssync;");}
+#else
+#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d)
+#endif
+#define SMC_outb(d,r) ({ word __d = (byte)(d); \
+ word __w = SMC_inw((r)&~1); \
+ __w &= ((r)&1) ? 0x00FF : 0xFF00; \
+ __w |= ((r)&1) ? __d<<8 : __d; \
+ SMC_outw(__w,(r)&~1); \
+ })
+#if 0
+#define SMC_outsw(r,b,l) outsw(SMC_BASE_ADDRESS+(r), (b), (l))
+#else
+#define SMC_outsw(r,b,l) ({ int __i; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outw( *(__b2 + __i), r); \
+ } \
+ })
+#endif
+
+#if 0
+#define SMC_insw(r,b,l) insw(SMC_BASE_ADDRESS+(r), (b), (l))
+#else
+#define SMC_insw(r,b,l) ({ int __i ; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inw(r); \
+ SMC_inw(0); \
+ }; \
+ })
+#endif
+
+#endif /* CONFIG_SMC_USE_IOFUNCS */
+
+#if defined(CONFIG_SMC_USE_32_BIT)
+
+#ifdef CONFIG_XSENGINE
+#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1))))
+#else
+#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))))
+#endif
+
+#define SMC_insl(r,b,l) ({ int __i ; \
+ dword *__b2; \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inl(r); \
+ SMC_inl(0); \
+ }; \
+ })
+
+#ifdef CONFIG_XSENGINE
+#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1))) = d)
+#else
+#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))) = d)
+#endif
+#define SMC_outsl(r,b,l) ({ int __i; \
+ dword *__b2; \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outl( *(__b2 + __i), r); \
+ } \
+ })
+
+#endif /* CONFIG_SMC_USE_32_BIT */
+
+#endif
+
+/*---------------------------------------------------------------
+ .
+ . A description of the SMSC registers is probably in order here,
+ . although for details, the SMC datasheet is invaluable.
+ .
+ . Basically, the chip has 4 banks of registers ( 0 to 3 ), which
+ . are accessed by writing a number into the BANK_SELECT register
+ . ( I also use a SMC_SELECT_BANK macro for this ).
+ .
+ . The banks are configured so that for most purposes, bank 2 is all
+ . that is needed for simple run time tasks.
+ -----------------------------------------------------------------------*/
+
+/*
+ . Bank Select Register:
+ .
+ . yyyy yyyy 0000 00xx
+ . xx = bank number
+ . yyyy yyyy = 0x33, for identification purposes.
+*/
+#define BANK_SELECT 14
+
+/* Transmit Control Register */
+/* BANK 0 */
+#define TCR_REG 0x0000 /* transmit control register */
+#define TCR_ENABLE 0x0001 /* When 1 we can transmit */
+#define TCR_LOOP 0x0002 /* Controls output pin LBK */
+#define TCR_FORCOL 0x0004 /* When 1 will force a collision */
+#define TCR_PAD_EN 0x0080 /* When 1 will pad tx frames < 64 bytes w/0 */
+#define TCR_NOCRC 0x0100 /* When 1 will not append CRC to tx frames */
+#define TCR_MON_CSN 0x0400 /* When 1 tx monitors carrier */
+#define TCR_FDUPLX 0x0800 /* When 1 enables full duplex operation */
+#define TCR_STP_SQET 0x1000 /* When 1 stops tx if Signal Quality Error */
+#define TCR_EPH_LOOP 0x2000 /* When 1 enables EPH block loopback */
+#define TCR_SWFDUP 0x8000 /* When 1 enables Switched Full Duplex mode */
+
+#define TCR_CLEAR 0 /* do NOTHING */
+/* the default settings for the TCR register : */
+/* QUESTION: do I want to enable padding of short packets ? */
+#define TCR_DEFAULT TCR_ENABLE
+
+
+/* EPH Status Register */
+/* BANK 0 */
+#define EPH_STATUS_REG 0x0002
+#define ES_TX_SUC 0x0001 /* Last TX was successful */
+#define ES_SNGL_COL 0x0002 /* Single collision detected for last tx */
+#define ES_MUL_COL 0x0004 /* Multiple collisions detected for last tx */
+#define ES_LTX_MULT 0x0008 /* Last tx was a multicast */
+#define ES_16COL 0x0010 /* 16 Collisions Reached */
+#define ES_SQET 0x0020 /* Signal Quality Error Test */
+#define ES_LTXBRD 0x0040 /* Last tx was a broadcast */
+#define ES_TXDEFR 0x0080 /* Transmit Deferred */
+#define ES_LATCOL 0x0200 /* Late collision detected on last tx */
+#define ES_LOSTCARR 0x0400 /* Lost Carrier Sense */
+#define ES_EXC_DEF 0x0800 /* Excessive Deferral */
+#define ES_CTR_ROL 0x1000 /* Counter Roll Over indication */
+#define ES_LINK_OK 0x4000 /* Driven by inverted value of nLNK pin */
+#define ES_TXUNRN 0x8000 /* Tx Underrun */
+
+
+/* Receive Control Register */
+/* BANK 0 */
+#define RCR_REG 0x0004
+#define RCR_RX_ABORT 0x0001 /* Set if a rx frame was aborted */
+#define RCR_PRMS 0x0002 /* Enable promiscuous mode */
+#define RCR_ALMUL 0x0004 /* When set accepts all multicast frames */
+#define RCR_RXEN 0x0100 /* IFF this is set, we can receive packets */
+#define RCR_STRIP_CRC 0x0200 /* When set strips CRC from rx packets */
+#define RCR_ABORT_ENB 0x0200 /* When set will abort rx on collision */
+#define RCR_FILT_CAR 0x0400 /* When set filters leading 12 bit s of carrier */
+#define RCR_SOFTRST 0x8000 /* resets the chip */
+
+/* the normal settings for the RCR register : */
+#define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN)
+#define RCR_CLEAR 0x0 /* set it to a base state */
+
+/* Counter Register */
+/* BANK 0 */
+#define COUNTER_REG 0x0006
+
+/* Memory Information Register */
+/* BANK 0 */
+#define MIR_REG 0x0008
+
+/* Receive/Phy Control Register */
+/* BANK 0 */
+#define RPC_REG 0x000A
+#define RPC_SPEED 0x2000 /* When 1 PHY is in 100Mbps mode. */
+#define RPC_DPLX 0x1000 /* When 1 PHY is in Full-Duplex Mode */
+#define RPC_ANEG 0x0800 /* When 1 PHY is in Auto-Negotiate Mode */
+#define RPC_LSXA_SHFT 5 /* Bits to shift LS2A,LS1A,LS0A to lsb */
+#define RPC_LSXB_SHFT 2 /* Bits to get LS2B,LS1B,LS0B to lsb */
+#define RPC_LED_100_10 (0x00) /* LED = 100Mbps OR's with 10Mbps link detect */
+#define RPC_LED_RES (0x01) /* LED = Reserved */
+#define RPC_LED_10 (0x02) /* LED = 10Mbps link detect */
+#define RPC_LED_FD (0x03) /* LED = Full Duplex Mode */
+#define RPC_LED_TX_RX (0x04) /* LED = TX or RX packet occurred */
+#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */
+#define RPC_LED_TX (0x06) /* LED = TX packet occurred */
+#define RPC_LED_RX (0x07) /* LED = RX packet occurred */
+#if defined(CONFIG_DK1C20) || defined(CONFIG_DK1S10)
+/* buggy schematic: LEDa -> yellow, LEDb --> green */
+#define RPC_DEFAULT ( RPC_SPEED | RPC_DPLX | RPC_ANEG \
+ | (RPC_LED_TX_RX << RPC_LSXA_SHFT) \
+ | (RPC_LED_100_10 << RPC_LSXB_SHFT) )
+#elif defined(CONFIG_ADNPESC1)
+/* SSV ADNP/ESC1 has only one LED: LEDa -> Rx/Tx indicator */
+#define RPC_DEFAULT ( RPC_SPEED | RPC_DPLX | RPC_ANEG \
+ | (RPC_LED_TX_RX << RPC_LSXA_SHFT) \
+ | (RPC_LED_100_10 << RPC_LSXB_SHFT) )
+#else
+/* SMSC reference design: LEDa --> green, LEDb --> yellow */
+#define RPC_DEFAULT ( RPC_SPEED | RPC_DPLX | RPC_ANEG \
+ | (RPC_LED_100_10 << RPC_LSXA_SHFT) \
+ | (RPC_LED_TX_RX << RPC_LSXB_SHFT) )
+#endif
+
+/* Bank 0 0x000C is reserved */
+
+/* Bank Select Register */
+/* All Banks */
+#define BSR_REG 0x000E
+
+
+/* Configuration Reg */
+/* BANK 1 */
+#define CONFIG_REG 0x0000
+#define CONFIG_EXT_PHY 0x0200 /* 1=external MII, 0=internal Phy */
+#define CONFIG_GPCNTRL 0x0400 /* Inverse value drives pin nCNTRL */
+#define CONFIG_NO_WAIT 0x1000 /* When 1 no extra wait states on ISA bus */
+#define CONFIG_EPH_POWER_EN 0x8000 /* When 0 EPH is placed into low power mode. */
+
+/* Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low */
+#define CONFIG_DEFAULT (CONFIG_EPH_POWER_EN)
+
+
+/* Base Address Register */
+/* BANK 1 */
+#define BASE_REG 0x0002
+
+
+/* Individual Address Registers */
+/* BANK 1 */
+#define ADDR0_REG 0x0004
+#define ADDR1_REG 0x0006
+#define ADDR2_REG 0x0008
+
+
+/* General Purpose Register */
+/* BANK 1 */
+#define GP_REG 0x000A
+
+
+/* Control Register */
+/* BANK 1 */
+#define CTL_REG 0x000C
+#define CTL_RCV_BAD 0x4000 /* When 1 bad CRC packets are received */
+#define CTL_AUTO_RELEASE 0x0800 /* When 1 tx pages are released automatically */
+#define CTL_LE_ENABLE 0x0080 /* When 1 enables Link Error interrupt */
+#define CTL_CR_ENABLE 0x0040 /* When 1 enables Counter Rollover interrupt */
+#define CTL_TE_ENABLE 0x0020 /* When 1 enables Transmit Error interrupt */
+#define CTL_EEPROM_SELECT 0x0004 /* Controls EEPROM reload & store */
+#define CTL_RELOAD 0x0002 /* When set reads EEPROM into registers */
+#define CTL_STORE 0x0001 /* When set stores registers into EEPROM */
+#define CTL_DEFAULT (0x1A10) /* Autorelease enabled*/
+
+/* MMU Command Register */
+/* BANK 2 */
+#define MMU_CMD_REG 0x0000
+#define MC_BUSY 1 /* When 1 the last release has not completed */
+#define MC_NOP (0<<5) /* No Op */
+#define MC_ALLOC (1<<5) /* OR with number of 256 byte packets */
+#define MC_RESET (2<<5) /* Reset MMU to initial state */
+#define MC_REMOVE (3<<5) /* Remove the current rx packet */
+#define MC_RELEASE (4<<5) /* Remove and release the current rx packet */
+#define MC_FREEPKT (5<<5) /* Release packet in PNR register */
+#define MC_ENQUEUE (6<<5) /* Enqueue the packet for transmit */
+#define MC_RSTTXFIFO (7<<5) /* Reset the TX FIFOs */
+
+
+/* Packet Number Register */
+/* BANK 2 */
+#define PN_REG 0x0002
+
+
+/* Allocation Result Register */
+/* BANK 2 */
+#define AR_REG 0x0003
+#define AR_FAILED 0x80 /* Alocation Failed */
+
+
+/* RX FIFO Ports Register */
+/* BANK 2 */
+#define RXFIFO_REG 0x0004 /* Must be read as a word */
+#define RXFIFO_REMPTY 0x8000 /* RX FIFO Empty */
+
+
+/* TX FIFO Ports Register */
+/* BANK 2 */
+#define TXFIFO_REG RXFIFO_REG /* Must be read as a word */
+#define TXFIFO_TEMPTY 0x80 /* TX FIFO Empty */
+
+
+/* Pointer Register */
+/* BANK 2 */
+#define PTR_REG 0x0006
+#define PTR_RCV 0x8000 /* 1=Receive area, 0=Transmit area */
+#define PTR_AUTOINC 0x4000 /* Auto increment the pointer on each access */
+#define PTR_READ 0x2000 /* When 1 the operation is a read */
+#define PTR_NOTEMPTY 0x0800 /* When 1 _do not_ write fifo DATA REG */
+
+
+/* Data Register */
+/* BANK 2 */
+#define SMC91111_DATA_REG 0x0008
+
+
+/* Interrupt Status/Acknowledge Register */
+/* BANK 2 */
+#define SMC91111_INT_REG 0x000C
+
+
+/* Interrupt Mask Register */
+/* BANK 2 */
+#define IM_REG 0x000D
+#define IM_MDINT 0x80 /* PHY MI Register 18 Interrupt */
+#define IM_ERCV_INT 0x40 /* Early Receive Interrupt */
+#define IM_EPH_INT 0x20 /* Set by Etheret Protocol Handler section */
+#define IM_RX_OVRN_INT 0x10 /* Set by Receiver Overruns */
+#define IM_ALLOC_INT 0x08 /* Set when allocation request is completed */
+#define IM_TX_EMPTY_INT 0x04 /* Set if the TX FIFO goes empty */
+#define IM_TX_INT 0x02 /* Transmit Interrrupt */
+#define IM_RCV_INT 0x01 /* Receive Interrupt */
+
+
+/* Multicast Table Registers */
+/* BANK 3 */
+#define MCAST_REG1 0x0000
+#define MCAST_REG2 0x0002
+#define MCAST_REG3 0x0004
+#define MCAST_REG4 0x0006
+
+
+/* Management Interface Register (MII) */
+/* BANK 3 */
+#define MII_REG 0x0008
+#define MII_MSK_CRS100 0x4000 /* Disables CRS100 detection during tx half dup */
+#define MII_MDOE 0x0008 /* MII Output Enable */
+#define MII_MCLK 0x0004 /* MII Clock, pin MDCLK */
+#define MII_MDI 0x0002 /* MII Input, pin MDI */
+#define MII_MDO 0x0001 /* MII Output, pin MDO */
+
+
+/* Revision Register */
+/* BANK 3 */
+#define REV_REG 0x000A /* ( hi: chip id low: rev # ) */
+
+
+/* Early RCV Register */
+/* BANK 3 */
+/* this is NOT on SMC9192 */
+#define ERCV_REG 0x000C
+#define ERCV_RCV_DISCRD 0x0080 /* When 1 discards a packet being received */
+#define ERCV_THRESHOLD 0x001F /* ERCV Threshold Mask */
+
+/* External Register */
+/* BANK 7 */
+#define EXT_REG 0x0000
+
+
+#define CHIP_9192 3
+#define CHIP_9194 4
+#define CHIP_9195 5
+#define CHIP_9196 6
+#define CHIP_91100 7
+#define CHIP_91100FD 8
+#define CHIP_91111FD 9
+
+#if 0
+static const char * chip_ids[ 15 ] = {
+ NULL, NULL, NULL,
+ /* 3 */ "SMC91C90/91C92",
+ /* 4 */ "SMC91C94",
+ /* 5 */ "SMC91C95",
+ /* 6 */ "SMC91C96",
+ /* 7 */ "SMC91C100",
+ /* 8 */ "SMC91C100FD",
+ /* 9 */ "SMC91C111",
+ NULL, NULL,
+ NULL, NULL, NULL};
+#endif
+
+/*
+ . Transmit status bits
+*/
+#define TS_SUCCESS 0x0001
+#define TS_LOSTCAR 0x0400
+#define TS_LATCOL 0x0200
+#define TS_16COL 0x0010
+
+/*
+ . Receive status bits
+*/
+#define RS_ALGNERR 0x8000
+#define RS_BRODCAST 0x4000
+#define RS_BADCRC 0x2000
+#define RS_ODDFRAME 0x1000 /* bug: the LAN91C111 never sets this on receive */
+#define RS_TOOLONG 0x0800
+#define RS_TOOSHORT 0x0400
+#define RS_MULTICAST 0x0001
+#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
+
+
+/* PHY Types */
+enum {
+ PHY_LAN83C183 = 1, /* LAN91C111 Internal PHY */
+ PHY_LAN83C180
+};
+
+
+/* PHY Register Addresses (LAN91C111 Internal PHY) */
+
+/* PHY Control Register */
+#define PHY_CNTL_REG 0x00
+#define PHY_CNTL_RST 0x8000 /* 1=PHY Reset */
+#define PHY_CNTL_LPBK 0x4000 /* 1=PHY Loopback */
+#define PHY_CNTL_SPEED 0x2000 /* 1=100Mbps, 0=10Mpbs */
+#define PHY_CNTL_ANEG_EN 0x1000 /* 1=Enable Auto negotiation */
+#define PHY_CNTL_PDN 0x0800 /* 1=PHY Power Down mode */
+#define PHY_CNTL_MII_DIS 0x0400 /* 1=MII 4 bit interface disabled */
+#define PHY_CNTL_ANEG_RST 0x0200 /* 1=Reset Auto negotiate */
+#define PHY_CNTL_DPLX 0x0100 /* 1=Full Duplex, 0=Half Duplex */
+#define PHY_CNTL_COLTST 0x0080 /* 1= MII Colision Test */
+
+/* PHY Status Register */
+#define PHY_STAT_REG 0x01
+#define PHY_STAT_CAP_T4 0x8000 /* 1=100Base-T4 capable */
+#define PHY_STAT_CAP_TXF 0x4000 /* 1=100Base-X full duplex capable */
+#define PHY_STAT_CAP_TXH 0x2000 /* 1=100Base-X half duplex capable */
+#define PHY_STAT_CAP_TF 0x1000 /* 1=10Mbps full duplex capable */
+#define PHY_STAT_CAP_TH 0x0800 /* 1=10Mbps half duplex capable */
+#define PHY_STAT_CAP_SUPR 0x0040 /* 1=recv mgmt frames with not preamble */
+#define PHY_STAT_ANEG_ACK 0x0020 /* 1=ANEG has completed */
+#define PHY_STAT_REM_FLT 0x0010 /* 1=Remote Fault detected */
+#define PHY_STAT_CAP_ANEG 0x0008 /* 1=Auto negotiate capable */
+#define PHY_STAT_LINK 0x0004 /* 1=valid link */
+#define PHY_STAT_JAB 0x0002 /* 1=10Mbps jabber condition */
+#define PHY_STAT_EXREG 0x0001 /* 1=extended registers implemented */
+
+/* PHY Identifier Registers */
+#define PHY_ID1_REG 0x02 /* PHY Identifier 1 */
+#define PHY_ID2_REG 0x03 /* PHY Identifier 2 */
+
+/* PHY Auto-Negotiation Advertisement Register */
+#define PHY_AD_REG 0x04
+#define PHY_AD_NP 0x8000 /* 1=PHY requests exchange of Next Page */
+#define PHY_AD_ACK 0x4000 /* 1=got link code word from remote */
+#define PHY_AD_RF 0x2000 /* 1=advertise remote fault */
+#define PHY_AD_T4 0x0200 /* 1=PHY is capable of 100Base-T4 */
+#define PHY_AD_TX_FDX 0x0100 /* 1=PHY is capable of 100Base-TX FDPLX */
+#define PHY_AD_TX_HDX 0x0080 /* 1=PHY is capable of 100Base-TX HDPLX */
+#define PHY_AD_10_FDX 0x0040 /* 1=PHY is capable of 10Base-T FDPLX */
+#define PHY_AD_10_HDX 0x0020 /* 1=PHY is capable of 10Base-T HDPLX */
+#define PHY_AD_CSMA 0x0001 /* 1=PHY is capable of 802.3 CMSA */
+
+/* PHY Auto-negotiation Remote End Capability Register */
+#define PHY_RMT_REG 0x05
+/* Uses same bit definitions as PHY_AD_REG */
+
+/* PHY Configuration Register 1 */
+#define PHY_CFG1_REG 0x10
+#define PHY_CFG1_LNKDIS 0x8000 /* 1=Rx Link Detect Function disabled */
+#define PHY_CFG1_XMTDIS 0x4000 /* 1=TP Transmitter Disabled */
+#define PHY_CFG1_XMTPDN 0x2000 /* 1=TP Transmitter Powered Down */
+#define PHY_CFG1_BYPSCR 0x0400 /* 1=Bypass scrambler/descrambler */
+#define PHY_CFG1_UNSCDS 0x0200 /* 1=Unscramble Idle Reception Disable */
+#define PHY_CFG1_EQLZR 0x0100 /* 1=Rx Equalizer Disabled */
+#define PHY_CFG1_CABLE 0x0080 /* 1=STP(150ohm), 0=UTP(100ohm) */
+#define PHY_CFG1_RLVL0 0x0040 /* 1=Rx Squelch level reduced by 4.5db */
+#define PHY_CFG1_TLVL_SHIFT 2 /* Transmit Output Level Adjust */
+#define PHY_CFG1_TLVL_MASK 0x003C
+#define PHY_CFG1_TRF_MASK 0x0003 /* Transmitter Rise/Fall time */
+
+
+/* PHY Configuration Register 2 */
+#define PHY_CFG2_REG 0x11
+#define PHY_CFG2_APOLDIS 0x0020 /* 1=Auto Polarity Correction disabled */
+#define PHY_CFG2_JABDIS 0x0010 /* 1=Jabber disabled */
+#define PHY_CFG2_MREG 0x0008 /* 1=Multiple register access (MII mgt) */
+#define PHY_CFG2_INTMDIO 0x0004 /* 1=Interrupt signaled with MDIO pulseo */
+
+/* PHY Status Output (and Interrupt status) Register */
+#define PHY_INT_REG 0x12 /* Status Output (Interrupt Status) */
+#define PHY_INT_INT 0x8000 /* 1=bits have changed since last read */
+#define PHY_INT_LNKFAIL 0x4000 /* 1=Link Not detected */
+#define PHY_INT_LOSSSYNC 0x2000 /* 1=Descrambler has lost sync */
+#define PHY_INT_CWRD 0x1000 /* 1=Invalid 4B5B code detected on rx */
+#define PHY_INT_SSD 0x0800 /* 1=No Start Of Stream detected on rx */
+#define PHY_INT_ESD 0x0400 /* 1=No End Of Stream detected on rx */
+#define PHY_INT_RPOL 0x0200 /* 1=Reverse Polarity detected */
+#define PHY_INT_JAB 0x0100 /* 1=Jabber detected */
+#define PHY_INT_SPDDET 0x0080 /* 1=100Base-TX mode, 0=10Base-T mode */
+#define PHY_INT_DPLXDET 0x0040 /* 1=Device in Full Duplex */
+
+/* PHY Interrupt/Status Mask Register */
+#define PHY_MASK_REG 0x13 /* Interrupt Mask */
+/* Uses the same bit definitions as PHY_INT_REG */
+
+
+/*-------------------------------------------------------------------------
+ . I define some macros to make it easier to do somewhat common
+ . or slightly complicated, repeated tasks.
+ --------------------------------------------------------------------------*/
+
+/* select a register bank, 0 to 3 */
+
+#define SMC_SELECT_BANK(x) { SMC_outw( x, BANK_SELECT ); }
+
+/* this enables an interrupt in the interrupt mask register */
+#define SMC_ENABLE_INT(x) {\
+ unsigned char mask;\
+ SMC_SELECT_BANK(2);\
+ mask = SMC_inb( IM_REG );\
+ mask |= (x);\
+ SMC_outb( mask, IM_REG ); \
+}
+
+/* this disables an interrupt from the interrupt mask register */
+
+#define SMC_DISABLE_INT(x) {\
+ unsigned char mask;\
+ SMC_SELECT_BANK(2);\
+ mask = SMC_inb( IM_REG );\
+ mask &= ~(x);\
+ SMC_outb( mask, IM_REG ); \
+}
+
+/*----------------------------------------------------------------------
+ . Define the interrupts that I want to receive from the card
+ .
+ . I want:
+ . IM_EPH_INT, for nasty errors
+ . IM_RCV_INT, for happy received packets
+ . IM_RX_OVRN_INT, because I have to kick the receiver
+ . IM_MDINT, for PHY Register 18 Status Changes
+ --------------------------------------------------------------------------*/
+#define SMC_INTERRUPT_MASK (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT | \
+ IM_MDINT)
+
+#endif /* _SMC_91111_H_ */
diff --git a/drivers/net/tigon3.c b/drivers/net/tigon3.c
new file mode 100644
index 0000000..5f6a4ec
--- /dev/null
+++ b/drivers/net/tigon3.c
@@ -0,0 +1,5699 @@
+/******************************************************************************/
+/* */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */
+/* Corporation. */
+/* All rights reserved. */
+/* */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation, located in the file LICENSE. */
+/* */
+/* History: */
+/******************************************************************************/
+#include <common.h>
+#include <asm/types.h>
+#if defined(CONFIG_CMD_NET) && !defined(CONFIG_NET_MULTI) && \
+ defined(CONFIG_TIGON3)
+#ifdef CONFIG_BMW
+#include <mpc824x.h>
+#endif
+#include <malloc.h>
+#include <linux/byteorder/big_endian.h>
+#include "bcm570x_mm.h"
+
+#define EMBEDDED 1
+/******************************************************************************/
+/* Local functions. */
+/******************************************************************************/
+
+LM_STATUS LM_Abort (PLM_DEVICE_BLOCK pDevice);
+LM_STATUS LM_QueueRxPackets (PLM_DEVICE_BLOCK pDevice);
+
+static LM_STATUS LM_TranslateRequestedMediaType (LM_REQUESTED_MEDIA_TYPE
+ RequestedMediaType,
+ PLM_MEDIA_TYPE pMediaType,
+ PLM_LINE_SPEED pLineSpeed,
+ PLM_DUPLEX_MODE pDuplexMode);
+
+static LM_STATUS LM_InitBcm540xPhy (PLM_DEVICE_BLOCK pDevice);
+
+__inline static LM_VOID LM_ServiceRxInterrupt (PLM_DEVICE_BLOCK pDevice);
+__inline static LM_VOID LM_ServiceTxInterrupt (PLM_DEVICE_BLOCK pDevice);
+
+static LM_STATUS LM_ForceAutoNegBcm540xPhy (PLM_DEVICE_BLOCK pDevice,
+ LM_REQUESTED_MEDIA_TYPE
+ RequestedMediaType);
+static LM_STATUS LM_ForceAutoNeg (PLM_DEVICE_BLOCK pDevice,
+ LM_REQUESTED_MEDIA_TYPE RequestedMediaType);
+static LM_UINT32 GetPhyAdFlowCntrlSettings (PLM_DEVICE_BLOCK pDevice);
+STATIC LM_STATUS LM_SetFlowControl (PLM_DEVICE_BLOCK pDevice,
+ LM_UINT32 LocalPhyAd,
+ LM_UINT32 RemotePhyAd);
+#if INCLUDE_TBI_SUPPORT
+STATIC LM_STATUS LM_SetupFiberPhy (PLM_DEVICE_BLOCK pDevice);
+STATIC LM_STATUS LM_InitBcm800xPhy (PLM_DEVICE_BLOCK pDevice);
+#endif
+STATIC LM_STATUS LM_SetupCopperPhy (PLM_DEVICE_BLOCK pDevice);
+STATIC PLM_ADAPTER_INFO LM_GetAdapterInfoBySsid (LM_UINT16 Svid,
+ LM_UINT16 Ssid);
+STATIC LM_STATUS LM_DmaTest (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt,
+ LM_PHYSICAL_ADDRESS BufferPhy,
+ LM_UINT32 BufferSize);
+STATIC LM_STATUS LM_HaltCpu (PLM_DEVICE_BLOCK pDevice, LM_UINT32 cpu_number);
+STATIC LM_STATUS LM_ResetChip (PLM_DEVICE_BLOCK pDevice);
+STATIC LM_STATUS LM_Test4GBoundary (PLM_DEVICE_BLOCK pDevice,
+ PLM_PACKET pPacket, PT3_SND_BD pSendBd);
+
+/******************************************************************************/
+/* External functions. */
+/******************************************************************************/
+
+LM_STATUS LM_LoadRlsFirmware (PLM_DEVICE_BLOCK pDevice);
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_UINT32 LM_RegRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register)
+{
+ LM_UINT32 Value32;
+
+#if PCIX_TARGET_WORKAROUND
+ MM_ACQUIRE_UNDI_LOCK (pDevice);
+#endif
+ MM_WriteConfig32 (pDevice, T3_PCI_REG_ADDR_REG, Register);
+ MM_ReadConfig32 (pDevice, T3_PCI_REG_DATA_REG, &Value32);
+#if PCIX_TARGET_WORKAROUND
+ MM_RELEASE_UNDI_LOCK (pDevice);
+#endif
+
+ return Value32;
+} /* LM_RegRdInd */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_VOID
+LM_RegWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register, LM_UINT32 Value32)
+{
+
+#if PCIX_TARGET_WORKAROUND
+ MM_ACQUIRE_UNDI_LOCK (pDevice);
+#endif
+ MM_WriteConfig32 (pDevice, T3_PCI_REG_ADDR_REG, Register);
+ MM_WriteConfig32 (pDevice, T3_PCI_REG_DATA_REG, Value32);
+#if PCIX_TARGET_WORKAROUND
+ MM_RELEASE_UNDI_LOCK (pDevice);
+#endif
+} /* LM_RegWrInd */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_UINT32 LM_MemRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr)
+{
+ LM_UINT32 Value32;
+
+ MM_ACQUIRE_UNDI_LOCK (pDevice);
+#ifdef BIG_ENDIAN_HOST
+ MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, MemAddr);
+ Value32 = REG_RD (pDevice, PciCfg.MemWindowData);
+ /* Value32 = REG_RD(pDevice,uIntMem.Mbuf[(MemAddr & 0x7fff)/4]); */
+#else
+ MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, MemAddr);
+ MM_ReadConfig32 (pDevice, T3_PCI_MEM_WIN_DATA_REG, &Value32);
+#endif
+ MM_RELEASE_UNDI_LOCK (pDevice);
+
+ return Value32;
+} /* LM_MemRdInd */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_VOID
+LM_MemWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr, LM_UINT32 Value32)
+{
+ MM_ACQUIRE_UNDI_LOCK (pDevice);
+#ifdef BIG_ENDIAN_HOST
+ REG_WR (pDevice, PciCfg.MemWindowBaseAddr, MemAddr);
+ REG_WR (pDevice, uIntMem.Mbuf[(MemAddr & 0x7fff) / 4], Value32);
+#else
+ MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, MemAddr);
+ MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_DATA_REG, Value32);
+#endif
+ MM_RELEASE_UNDI_LOCK (pDevice);
+} /* LM_MemWrInd */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_STATUS LM_QueueRxPackets (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_STATUS Lmstatus;
+ PLM_PACKET pPacket;
+ PT3_RCV_BD pRcvBd;
+ LM_UINT32 StdBdAdded = 0;
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ LM_UINT32 JumboBdAdded = 0;
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+
+ Lmstatus = LM_STATUS_SUCCESS;
+
+ pPacket = (PLM_PACKET) QQ_PopHead (&pDevice->RxPacketFreeQ.Container);
+ while (pPacket) {
+ switch (pPacket->u.Rx.RcvProdRing) {
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ case T3_JUMBO_RCV_PROD_RING: /* Jumbo Receive Ring. */
+ /* Initialize the buffer descriptor. */
+ pRcvBd =
+ &pDevice->pRxJumboBdVirt[pDevice->RxJumboProdIdx];
+ pRcvBd->Flags =
+ RCV_BD_FLAG_END | RCV_BD_FLAG_JUMBO_RING;
+ pRcvBd->Len = (LM_UINT16) pDevice->RxJumboBufferSize;
+
+ /* Initialize the receive buffer pointer */
+#if 0 /* Jimmy, deleted in new */
+ pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low;
+ pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High;
+#endif
+ MM_MapRxDma (pDevice, pPacket, &pRcvBd->HostAddr);
+
+ /* The opaque field may point to an offset from a fix addr. */
+ pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR (pPacket) -
+ MM_UINT_PTR (pDevice->
+ pPacketDescBase));
+
+ /* Update the producer index. */
+ pDevice->RxJumboProdIdx =
+ (pDevice->RxJumboProdIdx +
+ 1) & T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK;
+
+ JumboBdAdded++;
+ break;
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+
+ case T3_STD_RCV_PROD_RING: /* Standard Receive Ring. */
+ /* Initialize the buffer descriptor. */
+ pRcvBd = &pDevice->pRxStdBdVirt[pDevice->RxStdProdIdx];
+ pRcvBd->Flags = RCV_BD_FLAG_END;
+ pRcvBd->Len = MAX_STD_RCV_BUFFER_SIZE;
+
+ /* Initialize the receive buffer pointer */
+#if 0 /* Jimmy, deleted in new replaced with MM_MapRxDma */
+ pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low;
+ pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High;
+#endif
+ MM_MapRxDma (pDevice, pPacket, &pRcvBd->HostAddr);
+
+ /* The opaque field may point to an offset from a fix addr. */
+ pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR (pPacket) -
+ MM_UINT_PTR (pDevice->
+ pPacketDescBase));
+
+ /* Update the producer index. */
+ pDevice->RxStdProdIdx = (pDevice->RxStdProdIdx + 1) &
+ T3_STD_RCV_RCB_ENTRY_COUNT_MASK;
+
+ StdBdAdded++;
+ break;
+
+ case T3_UNKNOWN_RCV_PROD_RING:
+ default:
+ Lmstatus = LM_STATUS_FAILURE;
+ break;
+ } /* switch */
+
+ /* Bail out if there is any error. */
+ if (Lmstatus != LM_STATUS_SUCCESS) {
+ break;
+ }
+
+ pPacket =
+ (PLM_PACKET) QQ_PopHead (&pDevice->RxPacketFreeQ.Container);
+ } /* while */
+
+ wmb ();
+ /* Update the procedure index. */
+ if (StdBdAdded) {
+ MB_REG_WR (pDevice, Mailbox.RcvStdProdIdx.Low,
+ pDevice->RxStdProdIdx);
+ }
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ if (JumboBdAdded) {
+ MB_REG_WR (pDevice, Mailbox.RcvJumboProdIdx.Low,
+ pDevice->RxJumboProdIdx);
+ }
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+
+ return Lmstatus;
+} /* LM_QueueRxPackets */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+STATIC LM_VOID LM_NvramInit (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_UINT32 Value32;
+ LM_UINT32 j;
+
+ /* Intialize clock period and state machine. */
+ Value32 = SEEPROM_ADDR_CLK_PERD (SEEPROM_CLOCK_PERIOD) |
+ SEEPROM_ADDR_FSM_RESET;
+ REG_WR (pDevice, Grc.EepromAddr, Value32);
+
+ for (j = 0; j < 100; j++) {
+ MM_Wait (10);
+ }
+
+ /* Serial eeprom access using the Grc.EepromAddr/EepromData registers. */
+ Value32 = REG_RD (pDevice, Grc.LocalCtrl);
+ REG_WR (pDevice, Grc.LocalCtrl,
+ Value32 | GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM);
+
+ /* Set the 5701 compatibility mode if we are using EEPROM. */
+ if (T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
+ T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5701) {
+ Value32 = REG_RD (pDevice, Nvram.Config1);
+ if ((Value32 & FLASH_INTERFACE_ENABLE) == 0) {
+ /* Use the new interface to read EEPROM. */
+ Value32 &= ~FLASH_COMPAT_BYPASS;
+
+ REG_WR (pDevice, Nvram.Config1, Value32);
+ }
+ }
+} /* LM_NvRamInit */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+STATIC LM_STATUS
+LM_EepromRead (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, LM_UINT32 * pData)
+{
+ LM_UINT32 Value32;
+ LM_UINT32 Addr;
+ LM_UINT32 Dev;
+ LM_UINT32 j;
+
+ if (Offset > SEEPROM_CHIP_SIZE) {
+ return LM_STATUS_FAILURE;
+ }
+
+ Dev = Offset / SEEPROM_CHIP_SIZE;
+ Addr = Offset % SEEPROM_CHIP_SIZE;
+
+ Value32 = REG_RD (pDevice, Grc.EepromAddr);
+ Value32 &= ~(SEEPROM_ADDR_ADDRESS_MASK | SEEPROM_ADDR_DEV_ID_MASK |
+ SEEPROM_ADDR_RW_MASK);
+ REG_WR (pDevice, Grc.EepromAddr, Value32 | SEEPROM_ADDR_DEV_ID (Dev) |
+ SEEPROM_ADDR_ADDRESS (Addr) | SEEPROM_ADDR_START |
+ SEEPROM_ADDR_READ);
+
+ for (j = 0; j < 1000; j++) {
+ Value32 = REG_RD (pDevice, Grc.EepromAddr);
+ if (Value32 & SEEPROM_ADDR_COMPLETE) {
+ break;
+ }
+ MM_Wait (10);
+ }
+
+ if (Value32 & SEEPROM_ADDR_COMPLETE) {
+ Value32 = REG_RD (pDevice, Grc.EepromData);
+ *pData = Value32;
+
+ return LM_STATUS_SUCCESS;
+ }
+
+ return LM_STATUS_FAILURE;
+} /* LM_EepromRead */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+STATIC LM_STATUS
+LM_NvramRead (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, LM_UINT32 * pData)
+{
+ LM_UINT32 Value32;
+ LM_STATUS Status;
+ LM_UINT32 j;
+
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ Status = LM_EepromRead (pDevice, Offset, pData);
+ } else {
+ /* Determine if we have flash or EEPROM. */
+ Value32 = REG_RD (pDevice, Nvram.Config1);
+ if (Value32 & FLASH_INTERFACE_ENABLE) {
+ if (Value32 & FLASH_SSRAM_BUFFERRED_MODE) {
+ Offset = ((Offset / BUFFERED_FLASH_PAGE_SIZE) <<
+ BUFFERED_FLASH_PAGE_POS) +
+ (Offset % BUFFERED_FLASH_PAGE_SIZE);
+ }
+ }
+
+ REG_WR (pDevice, Nvram.SwArb, SW_ARB_REQ_SET1);
+ for (j = 0; j < 1000; j++) {
+ if (REG_RD (pDevice, Nvram.SwArb) & SW_ARB_GNT1) {
+ break;
+ }
+ MM_Wait (20);
+ }
+ if (j == 1000) {
+ return LM_STATUS_FAILURE;
+ }
+
+ /* Read from flash or EEPROM with the new 5703/02 interface. */
+ REG_WR (pDevice, Nvram.Addr, Offset & NVRAM_ADDRESS_MASK);
+
+ REG_WR (pDevice, Nvram.Cmd, NVRAM_CMD_RD | NVRAM_CMD_DO_IT |
+ NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_DONE);
+
+ /* Wait for the done bit to clear. */
+ for (j = 0; j < 500; j++) {
+ MM_Wait (10);
+
+ Value32 = REG_RD (pDevice, Nvram.Cmd);
+ if (!(Value32 & NVRAM_CMD_DONE)) {
+ break;
+ }
+ }
+
+ /* Wait for the done bit. */
+ if (!(Value32 & NVRAM_CMD_DONE)) {
+ for (j = 0; j < 500; j++) {
+ MM_Wait (10);
+
+ Value32 = REG_RD (pDevice, Nvram.Cmd);
+ if (Value32 & NVRAM_CMD_DONE) {
+ MM_Wait (10);
+
+ *pData =
+ REG_RD (pDevice, Nvram.ReadData);
+
+ /* Change the endianess. */
+ *pData =
+ ((*pData & 0xff) << 24) |
+ ((*pData & 0xff00) << 8) |
+ ((*pData & 0xff0000) >> 8) |
+ ((*pData >> 24) & 0xff);
+
+ break;
+ }
+ }
+ }
+
+ REG_WR (pDevice, Nvram.SwArb, SW_ARB_REQ_CLR1);
+ if (Value32 & NVRAM_CMD_DONE) {
+ Status = LM_STATUS_SUCCESS;
+ } else {
+ Status = LM_STATUS_FAILURE;
+ }
+ }
+
+ return Status;
+} /* LM_NvramRead */
+
+STATIC void LM_ReadVPD (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_UINT32 Vpd_arr[256 / 4];
+ LM_UINT8 *Vpd = (LM_UINT8 *) & Vpd_arr[0];
+ LM_UINT32 *Vpd_dptr = &Vpd_arr[0];
+ LM_UINT32 Value32;
+ unsigned int j;
+
+ /* Read PN from VPD */
+ for (j = 0; j < 256; j += 4, Vpd_dptr++) {
+ if (LM_NvramRead (pDevice, 0x100 + j, &Value32) !=
+ LM_STATUS_SUCCESS) {
+ printf ("BCM570x: LM_ReadVPD: VPD read failed"
+ " (no EEPROM onboard)\n");
+ return;
+ }
+ *Vpd_dptr = cpu_to_le32 (Value32);
+ }
+ for (j = 0; j < 256;) {
+ unsigned int Vpd_r_len;
+ unsigned int Vpd_r_end;
+
+ if ((Vpd[j] == 0x82) || (Vpd[j] == 0x91)) {
+ j = j + 3 + Vpd[j + 1] + (Vpd[j + 2] << 8);
+ } else if (Vpd[j] == 0x90) {
+ Vpd_r_len = Vpd[j + 1] + (Vpd[j + 2] << 8);
+ j += 3;
+ Vpd_r_end = Vpd_r_len + j;
+ while (j < Vpd_r_end) {
+ if ((Vpd[j] == 'P') && (Vpd[j + 1] == 'N')) {
+ unsigned int len = Vpd[j + 2];
+
+ if (len <= 24) {
+ memcpy (pDevice->PartNo,
+ &Vpd[j + 3], len);
+ }
+ break;
+ } else {
+ if (Vpd[j + 2] == 0) {
+ break;
+ }
+ j = j + Vpd[j + 2];
+ }
+ }
+ break;
+ } else {
+ break;
+ }
+ }
+}
+
+STATIC void LM_ReadBootCodeVersion (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_UINT32 Value32, offset, ver_offset;
+ int i;
+
+ if (LM_NvramRead (pDevice, 0x0, &Value32) != LM_STATUS_SUCCESS)
+ return;
+ if (Value32 != 0xaa559966)
+ return;
+ if (LM_NvramRead (pDevice, 0xc, &offset) != LM_STATUS_SUCCESS)
+ return;
+
+ offset = ((offset & 0xff) << 24) | ((offset & 0xff00) << 8) |
+ ((offset & 0xff0000) >> 8) | ((offset >> 24) & 0xff);
+ if (LM_NvramRead (pDevice, offset, &Value32) != LM_STATUS_SUCCESS)
+ return;
+ if ((Value32 == 0x0300000e) &&
+ (LM_NvramRead (pDevice, offset + 4, &Value32) == LM_STATUS_SUCCESS)
+ && (Value32 == 0)) {
+
+ if (LM_NvramRead (pDevice, offset + 8, &ver_offset) !=
+ LM_STATUS_SUCCESS)
+ return;
+ ver_offset = ((ver_offset & 0xff0000) >> 8) |
+ ((ver_offset >> 24) & 0xff);
+ for (i = 0; i < 16; i += 4) {
+ if (LM_NvramRead
+ (pDevice, offset + ver_offset + i,
+ &Value32) != LM_STATUS_SUCCESS) {
+ return;
+ }
+ *((LM_UINT32 *) & pDevice->BootCodeVer[i]) =
+ cpu_to_le32 (Value32);
+ }
+ } else {
+ char c;
+
+ if (LM_NvramRead (pDevice, 0x94, &Value32) != LM_STATUS_SUCCESS)
+ return;
+
+ i = 0;
+ c = ((Value32 & 0xff0000) >> 16);
+
+ if (c < 10) {
+ pDevice->BootCodeVer[i++] = c + '0';
+ } else {
+ pDevice->BootCodeVer[i++] = (c / 10) + '0';
+ pDevice->BootCodeVer[i++] = (c % 10) + '0';
+ }
+ pDevice->BootCodeVer[i++] = '.';
+ c = (Value32 & 0xff000000) >> 24;
+ if (c < 10) {
+ pDevice->BootCodeVer[i++] = c + '0';
+ } else {
+ pDevice->BootCodeVer[i++] = (c / 10) + '0';
+ pDevice->BootCodeVer[i++] = (c % 10) + '0';
+ }
+ pDevice->BootCodeVer[i] = 0;
+ }
+}
+
+STATIC void LM_GetBusSpeed (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_UINT32 PciState = pDevice->PciState;
+ LM_UINT32 ClockCtrl;
+ char *SpeedStr = "";
+
+ if (PciState & T3_PCI_STATE_32BIT_PCI_BUS) {
+ strcpy (pDevice->BusSpeedStr, "32-bit ");
+ } else {
+ strcpy (pDevice->BusSpeedStr, "64-bit ");
+ }
+ if (PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) {
+ strcat (pDevice->BusSpeedStr, "PCI ");
+ if (PciState & T3_PCI_STATE_HIGH_BUS_SPEED) {
+ SpeedStr = "66MHz";
+ } else {
+ SpeedStr = "33MHz";
+ }
+ } else {
+ strcat (pDevice->BusSpeedStr, "PCIX ");
+ if (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE) {
+ SpeedStr = "133MHz";
+ } else {
+ ClockCtrl = REG_RD (pDevice, PciCfg.ClockCtrl) & 0x1f;
+ switch (ClockCtrl) {
+ case 0:
+ SpeedStr = "33MHz";
+ break;
+
+ case 2:
+ SpeedStr = "50MHz";
+ break;
+
+ case 4:
+ SpeedStr = "66MHz";
+ break;
+
+ case 6:
+ SpeedStr = "100MHz";
+ break;
+
+ case 7:
+ SpeedStr = "133MHz";
+ break;
+ }
+ }
+ }
+ strcat (pDevice->BusSpeedStr, SpeedStr);
+}
+
+/******************************************************************************/
+/* Description: */
+/* This routine initializes default parameters and reads the PCI */
+/* configurations. */
+/* */
+/* Return: */
+/* LM_STATUS_SUCCESS */
+/******************************************************************************/
+LM_STATUS LM_GetAdapterInfo (PLM_DEVICE_BLOCK pDevice)
+{
+ PLM_ADAPTER_INFO pAdapterInfo;
+ LM_UINT32 Value32;
+ LM_STATUS Status;
+ LM_UINT32 j;
+ LM_UINT32 EeSigFound;
+ LM_UINT32 EePhyTypeSerdes = 0;
+ LM_UINT32 EePhyLedMode = 0;
+ LM_UINT32 EePhyId = 0;
+
+ /* Get Device Id and Vendor Id */
+ Status = MM_ReadConfig32 (pDevice, PCI_VENDOR_ID_REG, &Value32);
+ if (Status != LM_STATUS_SUCCESS) {
+ return Status;
+ }
+ pDevice->PciVendorId = (LM_UINT16) Value32;
+ pDevice->PciDeviceId = (LM_UINT16) (Value32 >> 16);
+
+ /* If we are not getting the write adapter, exit. */
+ if ((Value32 != T3_PCI_ID_BCM5700) &&
+ (Value32 != T3_PCI_ID_BCM5701) &&
+ (Value32 != T3_PCI_ID_BCM5702) &&
+ (Value32 != T3_PCI_ID_BCM5702x) &&
+ (Value32 != T3_PCI_ID_BCM5702FE) &&
+ (Value32 != T3_PCI_ID_BCM5703) &&
+ (Value32 != T3_PCI_ID_BCM5703x) && (Value32 != T3_PCI_ID_BCM5704)) {
+ return LM_STATUS_FAILURE;
+ }
+
+ Status = MM_ReadConfig32 (pDevice, PCI_REV_ID_REG, &Value32);
+ if (Status != LM_STATUS_SUCCESS) {
+ return Status;
+ }
+ pDevice->PciRevId = (LM_UINT8) Value32;
+
+ /* Get IRQ. */
+ Status = MM_ReadConfig32 (pDevice, PCI_INT_LINE_REG, &Value32);
+ if (Status != LM_STATUS_SUCCESS) {
+ return Status;
+ }
+ pDevice->Irq = (LM_UINT8) Value32;
+
+ /* Get interrupt pin. */
+ pDevice->IntPin = (LM_UINT8) (Value32 >> 8);
+
+ /* Get chip revision id. */
+ Status = MM_ReadConfig32 (pDevice, T3_PCI_MISC_HOST_CTRL_REG, &Value32);
+ pDevice->ChipRevId = Value32 >> 16;
+
+ /* Get subsystem vendor. */
+ Status =
+ MM_ReadConfig32 (pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG, &Value32);
+ if (Status != LM_STATUS_SUCCESS) {
+ return Status;
+ }
+ pDevice->SubsystemVendorId = (LM_UINT16) Value32;
+
+ /* Get PCI subsystem id. */
+ pDevice->SubsystemId = (LM_UINT16) (Value32 >> 16);
+
+ /* Get the cache line size. */
+ MM_ReadConfig32 (pDevice, PCI_CACHE_LINE_SIZE_REG, &Value32);
+ pDevice->CacheLineSize = (LM_UINT8) Value32;
+ pDevice->SavedCacheLineReg = Value32;
+
+ if (pDevice->ChipRevId != T3_CHIP_ID_5703_A1 &&
+ pDevice->ChipRevId != T3_CHIP_ID_5703_A2 &&
+ pDevice->ChipRevId != T3_CHIP_ID_5704_A0) {
+ pDevice->UndiFix = FALSE;
+ }
+#if !PCIX_TARGET_WORKAROUND
+ pDevice->UndiFix = FALSE;
+#endif
+ /* Map the memory base to system address space. */
+ if (!pDevice->UndiFix) {
+ Status = MM_MapMemBase (pDevice);
+ if (Status != LM_STATUS_SUCCESS) {
+ return Status;
+ }
+ /* Initialize the memory view pointer. */
+ pDevice->pMemView = (PT3_STD_MEM_MAP) pDevice->pMappedMemBase;
+ }
+#if PCIX_TARGET_WORKAROUND
+ /* store whether we are in PCI are PCI-X mode */
+ pDevice->EnablePciXFix = FALSE;
+
+ MM_ReadConfig32 (pDevice, T3_PCI_STATE_REG, &Value32);
+ if ((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0) {
+ /* Enable PCI-X workaround only if we are running on 5700 BX. */
+ if (T3_CHIP_REV (pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) {
+ pDevice->EnablePciXFix = TRUE;
+ }
+ }
+ if (pDevice->UndiFix) {
+ pDevice->EnablePciXFix = TRUE;
+ }
+#endif
+ /* Bx bug: due to the "byte_enable bug" in PCI-X mode, the power */
+ /* management register may be clobbered which may cause the */
+ /* BCM5700 to go into D3 state. While in this state, we will */
+ /* not have memory mapped register access. As a workaround, we */
+ /* need to restore the device to D0 state. */
+ MM_ReadConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, &Value32);
+ Value32 |= T3_PM_PME_ASSERTED;
+ Value32 &= ~T3_PM_POWER_STATE_MASK;
+ Value32 |= T3_PM_POWER_STATE_D0;
+ MM_WriteConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, Value32);
+
+ /* read the current PCI command word */
+ MM_ReadConfig32 (pDevice, PCI_COMMAND_REG, &Value32);
+
+ /* Make sure bus-mastering is enabled. */
+ Value32 |= PCI_BUSMASTER_ENABLE;
+
+#if PCIX_TARGET_WORKAROUND
+ /* if we are in PCI-X mode, also make sure mem-mapping and SERR#/PERR#
+ are enabled */
+ if (pDevice->EnablePciXFix == TRUE) {
+ Value32 |= (PCI_MEM_SPACE_ENABLE | PCI_SYSTEM_ERROR_ENABLE |
+ PCI_PARITY_ERROR_ENABLE);
+ }
+ if (pDevice->UndiFix) {
+ Value32 &= ~PCI_MEM_SPACE_ENABLE;
+ }
+#endif
+
+ if (pDevice->EnableMWI) {
+ Value32 |= PCI_MEMORY_WRITE_INVALIDATE;
+ } else {
+ Value32 &= (~PCI_MEMORY_WRITE_INVALIDATE);
+ }
+
+ /* Error out if mem-mapping is NOT enabled for PCI systems */
+ if (!(Value32 | PCI_MEM_SPACE_ENABLE)) {
+ return LM_STATUS_FAILURE;
+ }
+
+ /* save the value we are going to write into the PCI command word */
+ pDevice->PciCommandStatusWords = Value32;
+
+ Status = MM_WriteConfig32 (pDevice, PCI_COMMAND_REG, Value32);
+ if (Status != LM_STATUS_SUCCESS) {
+ return Status;
+ }
+
+ /* Set power state to D0. */
+ LM_SetPowerState (pDevice, LM_POWER_STATE_D0);
+
+#ifdef BIG_ENDIAN_PCI
+ pDevice->MiscHostCtrl =
+ MISC_HOST_CTRL_MASK_PCI_INT |
+ MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS |
+ MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP |
+ MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW;
+#else /* No CPU Swap modes for PCI IO */
+
+ /* Setup the mode registers. */
+ pDevice->MiscHostCtrl =
+ MISC_HOST_CTRL_MASK_PCI_INT |
+ MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP |
+#ifdef BIG_ENDIAN_HOST
+ MISC_HOST_CTRL_ENABLE_ENDIAN_BYTE_SWAP |
+#endif /* BIG_ENDIAN_HOST */
+ MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS |
+ MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW;
+#endif /* !BIG_ENDIAN_PCI */
+
+ /* write to PCI misc host ctr first in order to enable indirect accesses */
+ MM_WriteConfig32 (pDevice, T3_PCI_MISC_HOST_CTRL_REG,
+ pDevice->MiscHostCtrl);
+
+ REG_WR (pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl);
+
+#ifdef BIG_ENDIAN_PCI
+ Value32 = GRC_MODE_WORD_SWAP_DATA | GRC_MODE_WORD_SWAP_NON_FRAME_DATA;
+#else
+/* No CPU Swap modes for PCI IO */
+#ifdef BIG_ENDIAN_HOST
+ Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
+ GRC_MODE_WORD_SWAP_NON_FRAME_DATA;
+#else
+ Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | GRC_MODE_BYTE_SWAP_DATA;
+#endif
+#endif /* !BIG_ENDIAN_PCI */
+
+ REG_WR (pDevice, Grc.Mode, Value32);
+
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
+ REG_WR (pDevice, Grc.LocalCtrl,
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE1);
+ }
+ MM_Wait (40);
+
+ /* Enable indirect memory access */
+ REG_WR (pDevice, MemArbiter.Mode, T3_MEM_ARBITER_MODE_ENABLE);
+
+ if (REG_RD (pDevice, PciCfg.ClockCtrl) & T3_PCI_44MHZ_CORE_CLOCK) {
+ REG_WR (pDevice, PciCfg.ClockCtrl, T3_PCI_44MHZ_CORE_CLOCK |
+ T3_PCI_SELECT_ALTERNATE_CLOCK);
+ REG_WR (pDevice, PciCfg.ClockCtrl,
+ T3_PCI_SELECT_ALTERNATE_CLOCK);
+ MM_Wait (40); /* required delay is 27usec */
+ }
+ REG_WR (pDevice, PciCfg.ClockCtrl, 0);
+ REG_WR (pDevice, PciCfg.MemWindowBaseAddr, 0);
+
+#if PCIX_TARGET_WORKAROUND
+ MM_ReadConfig32 (pDevice, T3_PCI_STATE_REG, &Value32);
+ if ((pDevice->EnablePciXFix == FALSE) &&
+ ((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0)) {
+ if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B2 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B5) {
+ __raw_writel (0,
+ &(pDevice->pMemView->uIntMem.
+ MemBlock32K[0x300]));
+ __raw_writel (0,
+ &(pDevice->pMemView->uIntMem.
+ MemBlock32K[0x301]));
+ __raw_writel (0xffffffff,
+ &(pDevice->pMemView->uIntMem.
+ MemBlock32K[0x301]));
+ if (__raw_readl
+ (&(pDevice->pMemView->uIntMem.MemBlock32K[0x300])))
+ {
+ pDevice->EnablePciXFix = TRUE;
+ }
+ }
+ }
+#endif
+#if 1
+ /*
+ * This code was at the beginning of else block below, but that's
+ * a bug if node address in shared memory.
+ */
+ MM_Wait (50);
+ LM_NvramInit (pDevice);
+#endif
+ /* Get the node address. First try to get in from the shared memory. */
+ /* If the signature is not present, then get it from the NVRAM. */
+ Value32 = MEM_RD_OFFSET (pDevice, T3_MAC_ADDR_HIGH_MAILBOX);
+ if ((Value32 >> 16) == 0x484b) {
+
+ pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 8);
+ pDevice->NodeAddress[1] = (LM_UINT8) Value32;
+
+ Value32 = MEM_RD_OFFSET (pDevice, T3_MAC_ADDR_LOW_MAILBOX);
+
+ pDevice->NodeAddress[2] = (LM_UINT8) (Value32 >> 24);
+ pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 16);
+ pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 8);
+ pDevice->NodeAddress[5] = (LM_UINT8) Value32;
+
+ Status = LM_STATUS_SUCCESS;
+ } else {
+ Status = LM_NvramRead (pDevice, 0x7c, &Value32);
+ if (Status == LM_STATUS_SUCCESS) {
+ pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 16);
+ pDevice->NodeAddress[1] = (LM_UINT8) (Value32 >> 24);
+
+ Status = LM_NvramRead (pDevice, 0x80, &Value32);
+
+ pDevice->NodeAddress[2] = (LM_UINT8) Value32;
+ pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 8);
+ pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 16);
+ pDevice->NodeAddress[5] = (LM_UINT8) (Value32 >> 24);
+ }
+ }
+
+ /* Assign a default address. */
+ if (Status != LM_STATUS_SUCCESS) {
+#ifndef EMBEDDED
+ printk (KERN_ERR
+ "Cannot get MAC addr from NVRAM. Using default.\n");
+#endif
+ pDevice->NodeAddress[0] = 0x00;
+ pDevice->NodeAddress[1] = 0x10;
+ pDevice->NodeAddress[2] = 0x18;
+ pDevice->NodeAddress[3] = 0x68;
+ pDevice->NodeAddress[4] = 0x61;
+ pDevice->NodeAddress[5] = 0x76;
+ }
+
+ pDevice->PermanentNodeAddress[0] = pDevice->NodeAddress[0];
+ pDevice->PermanentNodeAddress[1] = pDevice->NodeAddress[1];
+ pDevice->PermanentNodeAddress[2] = pDevice->NodeAddress[2];
+ pDevice->PermanentNodeAddress[3] = pDevice->NodeAddress[3];
+ pDevice->PermanentNodeAddress[4] = pDevice->NodeAddress[4];
+ pDevice->PermanentNodeAddress[5] = pDevice->NodeAddress[5];
+
+ /* Initialize the default values. */
+ pDevice->NoTxPseudoHdrChksum = FALSE;
+ pDevice->NoRxPseudoHdrChksum = FALSE;
+ pDevice->NicSendBd = FALSE;
+ pDevice->TxPacketDescCnt = DEFAULT_TX_PACKET_DESC_COUNT;
+ pDevice->RxStdDescCnt = DEFAULT_STD_RCV_DESC_COUNT;
+ pDevice->RxCoalescingTicks = DEFAULT_RX_COALESCING_TICKS;
+ pDevice->TxCoalescingTicks = DEFAULT_TX_COALESCING_TICKS;
+ pDevice->RxMaxCoalescedFrames = DEFAULT_RX_MAX_COALESCED_FRAMES;
+ pDevice->TxMaxCoalescedFrames = DEFAULT_TX_MAX_COALESCED_FRAMES;
+ pDevice->RxCoalescingTicksDuringInt = BAD_DEFAULT_VALUE;
+ pDevice->TxCoalescingTicksDuringInt = BAD_DEFAULT_VALUE;
+ pDevice->RxMaxCoalescedFramesDuringInt = BAD_DEFAULT_VALUE;
+ pDevice->TxMaxCoalescedFramesDuringInt = BAD_DEFAULT_VALUE;
+ pDevice->StatsCoalescingTicks = DEFAULT_STATS_COALESCING_TICKS;
+ pDevice->EnableMWI = FALSE;
+ pDevice->TxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
+ pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
+ pDevice->DisableAutoNeg = FALSE;
+ pDevice->PhyIntMode = T3_PHY_INT_MODE_AUTO;
+ pDevice->LinkChngMode = T3_LINK_CHNG_MODE_AUTO;
+ pDevice->LedMode = LED_MODE_AUTO;
+ pDevice->ResetPhyOnInit = TRUE;
+ pDevice->DelayPciGrant = TRUE;
+ pDevice->UseTaggedStatus = FALSE;
+ pDevice->OneDmaAtOnce = BAD_DEFAULT_VALUE;
+
+ pDevice->DmaMbufLowMark = T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO;
+ pDevice->RxMacMbufLowMark = T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO;
+ pDevice->MbufHighMark = T3_DEF_MBUF_HIGH_WMARK_JUMBO;
+
+ pDevice->RequestedMediaType = LM_REQUESTED_MEDIA_TYPE_AUTO;
+ pDevice->TaskOffloadCap = LM_TASK_OFFLOAD_NONE;
+ pDevice->FlowControlCap = LM_FLOW_CONTROL_AUTO_PAUSE;
+ pDevice->EnableTbi = FALSE;
+#if INCLUDE_TBI_SUPPORT
+ pDevice->PollTbiLink = BAD_DEFAULT_VALUE;
+#endif
+
+ switch (T3_ASIC_REV (pDevice->ChipRevId)) {
+ case T3_ASIC_REV_5704:
+ pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR;
+ pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE64;
+ break;
+ default:
+ pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR;
+ pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE96;
+ break;
+ }
+
+ pDevice->LinkStatus = LM_STATUS_LINK_DOWN;
+ pDevice->QueueRxPackets = TRUE;
+
+ pDevice->EnableWireSpeed = TRUE;
+
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ pDevice->RxJumboDescCnt = DEFAULT_JUMBO_RCV_DESC_COUNT;
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+
+ /* Make this is a known adapter. */
+ pAdapterInfo = LM_GetAdapterInfoBySsid (pDevice->SubsystemVendorId,
+ pDevice->SubsystemId);
+
+ pDevice->BondId = REG_RD (pDevice, Grc.MiscCfg) & GRC_MISC_BD_ID_MASK;
+ if (pDevice->BondId != GRC_MISC_BD_ID_5700 &&
+ pDevice->BondId != GRC_MISC_BD_ID_5701 &&
+ pDevice->BondId != GRC_MISC_BD_ID_5702FE &&
+ pDevice->BondId != GRC_MISC_BD_ID_5703 &&
+ pDevice->BondId != GRC_MISC_BD_ID_5703S &&
+ pDevice->BondId != GRC_MISC_BD_ID_5704 &&
+ pDevice->BondId != GRC_MISC_BD_ID_5704CIOBE) {
+ return LM_STATUS_UNKNOWN_ADAPTER;
+ }
+
+ pDevice->SplitModeEnable = SPLIT_MODE_DISABLE;
+ if ((pDevice->ChipRevId == T3_CHIP_ID_5704_A0) &&
+ (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE)) {
+ pDevice->SplitModeEnable = SPLIT_MODE_ENABLE;
+ pDevice->SplitModeMaxReq = SPLIT_MODE_5704_MAX_REQ;
+ }
+
+ /* Get Eeprom info. */
+ Value32 = MEM_RD_OFFSET (pDevice, T3_NIC_DATA_SIG_ADDR);
+ if (Value32 == T3_NIC_DATA_SIG) {
+ EeSigFound = TRUE;
+ Value32 = MEM_RD_OFFSET (pDevice, T3_NIC_DATA_NIC_CFG_ADDR);
+
+ /* Determine PHY type. */
+ switch (Value32 & T3_NIC_CFG_PHY_TYPE_MASK) {
+ case T3_NIC_CFG_PHY_TYPE_COPPER:
+ EePhyTypeSerdes = FALSE;
+ break;
+
+ case T3_NIC_CFG_PHY_TYPE_FIBER:
+ EePhyTypeSerdes = TRUE;
+ break;
+
+ default:
+ EePhyTypeSerdes = FALSE;
+ break;
+ }
+
+ /* Determine PHY led mode. */
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ switch (Value32 & T3_NIC_CFG_LED_MODE_MASK) {
+ case T3_NIC_CFG_LED_MODE_TRIPLE_SPEED:
+ EePhyLedMode = LED_MODE_THREE_LINK;
+ break;
+
+ case T3_NIC_CFG_LED_MODE_LINK_SPEED:
+ EePhyLedMode = LED_MODE_LINK10;
+ break;
+
+ default:
+ EePhyLedMode = LED_MODE_AUTO;
+ break;
+ }
+ } else {
+ switch (Value32 & T3_NIC_CFG_LED_MODE_MASK) {
+ case T3_NIC_CFG_LED_MODE_OPEN_DRAIN:
+ EePhyLedMode = LED_MODE_OPEN_DRAIN;
+ break;
+
+ case T3_NIC_CFG_LED_MODE_OUTPUT:
+ EePhyLedMode = LED_MODE_OUTPUT;
+ break;
+
+ default:
+ EePhyLedMode = LED_MODE_AUTO;
+ break;
+ }
+ }
+ if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5703_A2) {
+ /* Enable EEPROM write protection. */
+ if (Value32 & T3_NIC_EEPROM_WP) {
+ pDevice->EepromWp = TRUE;
+ }
+ }
+
+ /* Get the PHY Id. */
+ Value32 = MEM_RD_OFFSET (pDevice, T3_NIC_DATA_PHY_ID_ADDR);
+ if (Value32) {
+ EePhyId = (((Value32 & T3_NIC_PHY_ID1_MASK) >> 16) &
+ PHY_ID1_OUI_MASK) << 10;
+
+ Value32 = Value32 & T3_NIC_PHY_ID2_MASK;
+
+ EePhyId |= ((Value32 & PHY_ID2_OUI_MASK) << 16) |
+ (Value32 & PHY_ID2_MODEL_MASK) | (Value32 &
+ PHY_ID2_REV_MASK);
+ } else {
+ EePhyId = 0;
+ }
+ } else {
+ EeSigFound = FALSE;
+ }
+
+ /* Set the PHY address. */
+ pDevice->PhyAddr = PHY_DEVICE_ID;
+
+ /* Disable auto polling. */
+ pDevice->MiMode = 0xc0000;
+ REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode);
+ MM_Wait (40);
+
+ /* Get the PHY id. */
+ LM_ReadPhy (pDevice, PHY_ID1_REG, &Value32);
+ pDevice->PhyId = (Value32 & PHY_ID1_OUI_MASK) << 10;
+
+ LM_ReadPhy (pDevice, PHY_ID2_REG, &Value32);
+ pDevice->PhyId |= ((Value32 & PHY_ID2_OUI_MASK) << 16) |
+ (Value32 & PHY_ID2_MODEL_MASK) | (Value32 & PHY_ID2_REV_MASK);
+
+ /* Set the EnableTbi flag to false if we have a copper PHY. */
+ switch (pDevice->PhyId & PHY_ID_MASK) {
+ case PHY_BCM5400_PHY_ID:
+ pDevice->EnableTbi = FALSE;
+ break;
+
+ case PHY_BCM5401_PHY_ID:
+ pDevice->EnableTbi = FALSE;
+ break;
+
+ case PHY_BCM5411_PHY_ID:
+ pDevice->EnableTbi = FALSE;
+ break;
+
+ case PHY_BCM5701_PHY_ID:
+ pDevice->EnableTbi = FALSE;
+ break;
+
+ case PHY_BCM5703_PHY_ID:
+ pDevice->EnableTbi = FALSE;
+ break;
+
+ case PHY_BCM5704_PHY_ID:
+ pDevice->EnableTbi = FALSE;
+ break;
+
+ case PHY_BCM8002_PHY_ID:
+ pDevice->EnableTbi = TRUE;
+ break;
+
+ default:
+
+ if (pAdapterInfo) {
+ pDevice->PhyId = pAdapterInfo->PhyId;
+ pDevice->EnableTbi = pAdapterInfo->Serdes;
+ } else if (EeSigFound) {
+ pDevice->PhyId = EePhyId;
+ pDevice->EnableTbi = EePhyTypeSerdes;
+ }
+ break;
+ }
+
+ /* Bail out if we don't know the copper PHY id. */
+ if (UNKNOWN_PHY_ID (pDevice->PhyId) && !pDevice->EnableTbi) {
+ return LM_STATUS_FAILURE;
+ }
+
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5703) {
+ if ((pDevice->SavedCacheLineReg & 0xff00) < 0x4000) {
+ pDevice->SavedCacheLineReg &= 0xffff00ff;
+ pDevice->SavedCacheLineReg |= 0x4000;
+ }
+ }
+ /* Change driver parameters. */
+ Status = MM_GetConfig (pDevice);
+ if (Status != LM_STATUS_SUCCESS) {
+ return Status;
+ }
+#if INCLUDE_5701_AX_FIX
+ if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B0) {
+ pDevice->ResetPhyOnInit = TRUE;
+ }
+#endif
+
+ /* Save the current phy link status. */
+ if (!pDevice->EnableTbi) {
+ LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
+
+ /* If we don't have link reset the PHY. */
+ if (!(Value32 & PHY_STATUS_LINK_PASS)
+ || pDevice->ResetPhyOnInit) {
+
+ LM_WritePhy (pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET);
+
+ for (j = 0; j < 100; j++) {
+ MM_Wait (10);
+
+ LM_ReadPhy (pDevice, PHY_CTRL_REG, &Value32);
+ if (Value32 && !(Value32 & PHY_CTRL_PHY_RESET)) {
+ MM_Wait (40);
+ break;
+ }
+ }
+
+#if INCLUDE_5701_AX_FIX
+ /* 5701_AX_BX bug: only advertises 10mb speed. */
+ if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B0) {
+
+ Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD |
+ PHY_AN_AD_10BASET_HALF |
+ PHY_AN_AD_10BASET_FULL |
+ PHY_AN_AD_100BASETX_FULL |
+ PHY_AN_AD_100BASETX_HALF;
+ Value32 |= GetPhyAdFlowCntrlSettings (pDevice);
+ LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32);
+ pDevice->advertising = Value32;
+
+ Value32 = BCM540X_AN_AD_1000BASET_HALF |
+ BCM540X_AN_AD_1000BASET_FULL |
+ BCM540X_CONFIG_AS_MASTER |
+ BCM540X_ENABLE_CONFIG_AS_MASTER;
+ LM_WritePhy (pDevice,
+ BCM540X_1000BASET_CTRL_REG,
+ Value32);
+ pDevice->advertising1000 = Value32;
+
+ LM_WritePhy (pDevice, PHY_CTRL_REG,
+ PHY_CTRL_AUTO_NEG_ENABLE |
+ PHY_CTRL_RESTART_AUTO_NEG);
+ }
+#endif
+ if (T3_ASIC_REV (pDevice->ChipRevId) ==
+ T3_ASIC_REV_5703) {
+ LM_WritePhy (pDevice, 0x18, 0x0c00);
+ LM_WritePhy (pDevice, 0x17, 0x201f);
+ LM_WritePhy (pDevice, 0x15, 0x2aaa);
+ }
+ if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) {
+ LM_WritePhy (pDevice, 0x1c, 0x8d68);
+ LM_WritePhy (pDevice, 0x1c, 0x8d68);
+ }
+ /* Enable Ethernet@WireSpeed. */
+ if (pDevice->EnableWireSpeed) {
+ LM_WritePhy (pDevice, 0x18, 0x7007);
+ LM_ReadPhy (pDevice, 0x18, &Value32);
+ LM_WritePhy (pDevice, 0x18,
+ Value32 | BIT_15 | BIT_4);
+ }
+ }
+ }
+
+ /* Turn off tap power management. */
+ if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID) {
+ LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x0c20);
+ LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012);
+ LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x1804);
+ LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013);
+ LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x1204);
+ LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
+ LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0132);
+ LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
+ LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0232);
+ LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f);
+ LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0a20);
+
+ MM_Wait (40);
+ }
+#if INCLUDE_TBI_SUPPORT
+ pDevice->IgnoreTbiLinkChange = FALSE;
+
+ if (pDevice->EnableTbi) {
+ pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_NONE;
+ pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY;
+ if ((pDevice->PollTbiLink == BAD_DEFAULT_VALUE) ||
+ pDevice->DisableAutoNeg) {
+ pDevice->PollTbiLink = FALSE;
+ }
+ } else {
+ pDevice->PollTbiLink = FALSE;
+ }
+#endif /* INCLUDE_TBI_SUPPORT */
+
+ /* UseTaggedStatus is only valid for 5701 and later. */
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
+ pDevice->UseTaggedStatus = FALSE;
+
+ pDevice->CoalesceMode = 0;
+ } else {
+ pDevice->CoalesceMode =
+ HOST_COALESCE_CLEAR_TICKS_ON_RX_BD_EVENT |
+ HOST_COALESCE_CLEAR_TICKS_ON_TX_BD_EVENT;
+ }
+
+ /* Set the status block size. */
+ if (T3_CHIP_REV (pDevice->ChipRevId) != T3_CHIP_REV_5700_AX &&
+ T3_CHIP_REV (pDevice->ChipRevId) != T3_CHIP_REV_5700_BX) {
+ pDevice->CoalesceMode |= HOST_COALESCE_32_BYTE_STATUS_MODE;
+ }
+
+ /* Check the DURING_INT coalescing ticks parameters. */
+ if (pDevice->UseTaggedStatus) {
+ if (pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) {
+ pDevice->RxCoalescingTicksDuringInt =
+ DEFAULT_RX_COALESCING_TICKS_DURING_INT;
+ }
+
+ if (pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) {
+ pDevice->TxCoalescingTicksDuringInt =
+ DEFAULT_TX_COALESCING_TICKS_DURING_INT;
+ }
+
+ if (pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) {
+ pDevice->RxMaxCoalescedFramesDuringInt =
+ DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT;
+ }
+
+ if (pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) {
+ pDevice->TxMaxCoalescedFramesDuringInt =
+ DEFAULT_TX_MAX_COALESCED_FRAMES_DURING_INT;
+ }
+ } else {
+ if (pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) {
+ pDevice->RxCoalescingTicksDuringInt = 0;
+ }
+
+ if (pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) {
+ pDevice->TxCoalescingTicksDuringInt = 0;
+ }
+
+ if (pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) {
+ pDevice->RxMaxCoalescedFramesDuringInt = 0;
+ }
+
+ if (pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) {
+ pDevice->TxMaxCoalescedFramesDuringInt = 0;
+ }
+ }
+
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ if (pDevice->RxMtu <= (MAX_STD_RCV_BUFFER_SIZE - 8 /* CRC */ )) {
+ pDevice->RxJumboDescCnt = 0;
+ if (pDevice->RxMtu <= MAX_ETHERNET_PACKET_SIZE_NO_CRC) {
+ pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
+ }
+ } else {
+ pDevice->RxJumboBufferSize =
+ (pDevice->RxMtu + 8 /* CRC + VLAN */ +
+ COMMON_CACHE_LINE_SIZE - 1) & ~COMMON_CACHE_LINE_MASK;
+
+ if (pDevice->RxJumboBufferSize > MAX_JUMBO_RCV_BUFFER_SIZE) {
+ pDevice->RxJumboBufferSize =
+ DEFAULT_JUMBO_RCV_BUFFER_SIZE;
+ pDevice->RxMtu =
+ pDevice->RxJumboBufferSize - 8 /* CRC + VLAN */ ;
+ }
+ pDevice->TxMtu = pDevice->RxMtu;
+
+ }
+#else
+ pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+
+ pDevice->RxPacketDescCnt =
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ pDevice->RxJumboDescCnt +
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+ pDevice->RxStdDescCnt;
+
+ if (pDevice->TxMtu < MAX_ETHERNET_PACKET_SIZE_NO_CRC) {
+ pDevice->TxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
+ }
+
+ if (pDevice->TxMtu > MAX_JUMBO_TX_BUFFER_SIZE) {
+ pDevice->TxMtu = MAX_JUMBO_TX_BUFFER_SIZE;
+ }
+
+ /* Configure the proper ways to get link change interrupt. */
+ if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO) {
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
+ pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
+ } else {
+ pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY;
+ }
+ } else if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) {
+ /* Auto-polling does not work on 5700_AX and 5700_BX. */
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
+ pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
+ }
+ }
+
+ /* Determine the method to get link change status. */
+ if (pDevice->LinkChngMode == T3_LINK_CHNG_MODE_AUTO) {
+ /* The link status bit in the status block does not work on 5700_AX */
+ /* and 5700_BX chips. */
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
+ pDevice->LinkChngMode =
+ T3_LINK_CHNG_MODE_USE_STATUS_REG;
+ } else {
+ pDevice->LinkChngMode =
+ T3_LINK_CHNG_MODE_USE_STATUS_BLOCK;
+ }
+ }
+
+ if (pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT ||
+ T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
+ pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG;
+ }
+
+ /* Configure PHY led mode. */
+ if (pDevice->LedMode == LED_MODE_AUTO) {
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ if (pDevice->SubsystemVendorId == T3_SVID_DELL) {
+ pDevice->LedMode = LED_MODE_LINK10;
+ } else {
+ pDevice->LedMode = LED_MODE_THREE_LINK;
+
+ if (EeSigFound && EePhyLedMode != LED_MODE_AUTO) {
+ pDevice->LedMode = EePhyLedMode;
+ }
+ }
+
+ /* bug? 5701 in LINK10 mode does not seem to work when */
+ /* PhyIntMode is LINK_READY. */
+ if (T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5700
+ &&
+#if INCLUDE_TBI_SUPPORT
+ pDevice->EnableTbi == FALSE &&
+#endif
+ pDevice->LedMode == LED_MODE_LINK10) {
+ pDevice->PhyIntMode =
+ T3_PHY_INT_MODE_MI_INTERRUPT;
+ pDevice->LinkChngMode =
+ T3_LINK_CHNG_MODE_USE_STATUS_REG;
+ }
+
+ if (pDevice->EnableTbi) {
+ pDevice->LedMode = LED_MODE_THREE_LINK;
+ }
+ } else {
+ if (EeSigFound && EePhyLedMode != LED_MODE_AUTO) {
+ pDevice->LedMode = EePhyLedMode;
+ } else {
+ pDevice->LedMode = LED_MODE_OPEN_DRAIN;
+ }
+ }
+ }
+
+ /* Enable OneDmaAtOnce. */
+ if (pDevice->OneDmaAtOnce == BAD_DEFAULT_VALUE) {
+ pDevice->OneDmaAtOnce = FALSE;
+ }
+
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B2) {
+ pDevice->WolSpeed = WOL_SPEED_10MB;
+ } else {
+ pDevice->WolSpeed = WOL_SPEED_100MB;
+ }
+
+ /* Offloadings. */
+ pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE;
+
+ /* Turn off task offloading on Ax. */
+ if (pDevice->ChipRevId == T3_CHIP_ID_5700_B0) {
+ pDevice->TaskOffloadCap &= ~(LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
+ LM_TASK_OFFLOAD_TX_UDP_CHECKSUM);
+ }
+ pDevice->PciState = REG_RD (pDevice, PciCfg.PciState);
+ LM_ReadVPD (pDevice);
+ LM_ReadBootCodeVersion (pDevice);
+ LM_GetBusSpeed (pDevice);
+
+ return LM_STATUS_SUCCESS;
+} /* LM_GetAdapterInfo */
+
+STATIC PLM_ADAPTER_INFO LM_GetAdapterInfoBySsid (LM_UINT16 Svid, LM_UINT16 Ssid)
+{
+ static LM_ADAPTER_INFO AdapterArr[] = {
+ {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A6,
+ PHY_BCM5401_PHY_ID, 0},
+ {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A5,
+ PHY_BCM5701_PHY_ID, 0},
+ {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700T6,
+ PHY_BCM8002_PHY_ID, 1},
+ {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A9, 0, 1},
+ {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T1,
+ PHY_BCM5701_PHY_ID, 0},
+ {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T8,
+ PHY_BCM5701_PHY_ID, 0},
+ {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A7, 0, 1},
+ {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A10,
+ PHY_BCM5701_PHY_ID, 0},
+ {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A12,
+ PHY_BCM5701_PHY_ID, 0},
+ {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax1,
+ PHY_BCM5701_PHY_ID, 0},
+ {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax2,
+ PHY_BCM5701_PHY_ID, 0},
+
+ {T3_SVID_3COM, T3_SSID_3COM_3C996T, PHY_BCM5401_PHY_ID, 0},
+ {T3_SVID_3COM, T3_SSID_3COM_3C996BT, PHY_BCM5701_PHY_ID, 0},
+ {T3_SVID_3COM, T3_SSID_3COM_3C996SX, 0, 1},
+ {T3_SVID_3COM, T3_SSID_3COM_3C1000T, PHY_BCM5701_PHY_ID, 0},
+ {T3_SVID_3COM, T3_SSID_3COM_3C940BR01, PHY_BCM5701_PHY_ID, 0},
+
+ {T3_SVID_DELL, T3_SSID_DELL_VIPER, PHY_BCM5401_PHY_ID, 0},
+ {T3_SVID_DELL, T3_SSID_DELL_JAGUAR, PHY_BCM5401_PHY_ID, 0},
+ {T3_SVID_DELL, T3_SSID_DELL_MERLOT, PHY_BCM5411_PHY_ID, 0},
+ {T3_SVID_DELL, T3_SSID_DELL_SLIM_MERLOT, PHY_BCM5411_PHY_ID, 0},
+
+ {T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE, PHY_BCM5701_PHY_ID, 0},
+ {T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE_2, PHY_BCM5701_PHY_ID,
+ 0},
+ {T3_SVID_COMPAQ, T3_SSID_COMPAQ_CHANGELING, 0, 1},
+ {T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780, PHY_BCM5701_PHY_ID, 0},
+ {T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780_2, PHY_BCM5701_PHY_ID,
+ 0},
+
+ };
+ LM_UINT32 j;
+
+ for (j = 0; j < sizeof (AdapterArr) / sizeof (LM_ADAPTER_INFO); j++) {
+ if (AdapterArr[j].Svid == Svid && AdapterArr[j].Ssid == Ssid) {
+ return &AdapterArr[j];
+ }
+ }
+
+ return NULL;
+}
+
+/******************************************************************************/
+/* Description: */
+/* This routine sets up receive/transmit buffer descriptions queues. */
+/* */
+/* Return: */
+/* LM_STATUS_SUCCESS */
+/******************************************************************************/
+LM_STATUS LM_InitializeAdapter (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_PHYSICAL_ADDRESS MemPhy;
+ PLM_UINT8 pMemVirt;
+ PLM_PACKET pPacket;
+ LM_STATUS Status;
+ LM_UINT32 Size;
+ LM_UINT32 j;
+
+ /* Set power state to D0. */
+ LM_SetPowerState (pDevice, LM_POWER_STATE_D0);
+
+ /* Intialize the queues. */
+ QQ_InitQueue (&pDevice->RxPacketReceivedQ.Container,
+ MAX_RX_PACKET_DESC_COUNT);
+ QQ_InitQueue (&pDevice->RxPacketFreeQ.Container,
+ MAX_RX_PACKET_DESC_COUNT);
+
+ QQ_InitQueue (&pDevice->TxPacketFreeQ.Container,
+ MAX_TX_PACKET_DESC_COUNT);
+ QQ_InitQueue (&pDevice->TxPacketActiveQ.Container,
+ MAX_TX_PACKET_DESC_COUNT);
+ QQ_InitQueue (&pDevice->TxPacketXmittedQ.Container,
+ MAX_TX_PACKET_DESC_COUNT);
+
+ /* Allocate shared memory for: status block, the buffers for receive */
+ /* rings -- standard, mini, jumbo, and return rings. */
+ Size = T3_STATUS_BLOCK_SIZE + sizeof (T3_STATS_BLOCK) +
+ T3_STD_RCV_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD) +
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD) +
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+ T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD);
+
+ /* Memory for host based Send BD. */
+ if (pDevice->NicSendBd == FALSE) {
+ Size += sizeof (T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT;
+ }
+
+ /* Allocate the memory block. */
+ Status =
+ MM_AllocateSharedMemory (pDevice, Size, (PLM_VOID) & pMemVirt,
+ &MemPhy, FALSE);
+ if (Status != LM_STATUS_SUCCESS) {
+ return Status;
+ }
+
+ /* Program DMA Read/Write */
+ if (pDevice->PciState & T3_PCI_STATE_NOT_PCI_X_BUS) {
+ pDevice->DmaReadWriteCtrl = 0x763f000f;
+ } else {
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5704) {
+ pDevice->DmaReadWriteCtrl = 0x761f0000;
+ } else {
+ pDevice->DmaReadWriteCtrl = 0x761b000f;
+ }
+ if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5703_A2) {
+ pDevice->OneDmaAtOnce = TRUE;
+ }
+ }
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5703) {
+ pDevice->DmaReadWriteCtrl &= 0xfffffff0;
+ }
+
+ if (pDevice->OneDmaAtOnce) {
+ pDevice->DmaReadWriteCtrl |= DMA_CTRL_WRITE_ONE_DMA_AT_ONCE;
+ }
+ REG_WR (pDevice, PciCfg.DmaReadWriteCtrl, pDevice->DmaReadWriteCtrl);
+
+ if (LM_DmaTest (pDevice, pMemVirt, MemPhy, 0x400) != LM_STATUS_SUCCESS) {
+ return LM_STATUS_FAILURE;
+ }
+
+ /* Status block. */
+ pDevice->pStatusBlkVirt = (PT3_STATUS_BLOCK) pMemVirt;
+ pDevice->StatusBlkPhy = MemPhy;
+ pMemVirt += T3_STATUS_BLOCK_SIZE;
+ LM_INC_PHYSICAL_ADDRESS (&MemPhy, T3_STATUS_BLOCK_SIZE);
+
+ /* Statistics block. */
+ pDevice->pStatsBlkVirt = (PT3_STATS_BLOCK) pMemVirt;
+ pDevice->StatsBlkPhy = MemPhy;
+ pMemVirt += sizeof (T3_STATS_BLOCK);
+ LM_INC_PHYSICAL_ADDRESS (&MemPhy, sizeof (T3_STATS_BLOCK));
+
+ /* Receive standard BD buffer. */
+ pDevice->pRxStdBdVirt = (PT3_RCV_BD) pMemVirt;
+ pDevice->RxStdBdPhy = MemPhy;
+
+ pMemVirt += T3_STD_RCV_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD);
+ LM_INC_PHYSICAL_ADDRESS (&MemPhy,
+ T3_STD_RCV_RCB_ENTRY_COUNT *
+ sizeof (T3_RCV_BD));
+
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ /* Receive jumbo BD buffer. */
+ pDevice->pRxJumboBdVirt = (PT3_RCV_BD) pMemVirt;
+ pDevice->RxJumboBdPhy = MemPhy;
+
+ pMemVirt += T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD);
+ LM_INC_PHYSICAL_ADDRESS (&MemPhy,
+ T3_JUMBO_RCV_RCB_ENTRY_COUNT *
+ sizeof (T3_RCV_BD));
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+
+ /* Receive return BD buffer. */
+ pDevice->pRcvRetBdVirt = (PT3_RCV_BD) pMemVirt;
+ pDevice->RcvRetBdPhy = MemPhy;
+
+ pMemVirt += T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD);
+ LM_INC_PHYSICAL_ADDRESS (&MemPhy,
+ T3_RCV_RETURN_RCB_ENTRY_COUNT *
+ sizeof (T3_RCV_BD));
+
+ /* Set up Send BD. */
+ if (pDevice->NicSendBd == FALSE) {
+ pDevice->pSendBdVirt = (PT3_SND_BD) pMemVirt;
+ pDevice->SendBdPhy = MemPhy;
+
+ pMemVirt += sizeof (T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT;
+ LM_INC_PHYSICAL_ADDRESS (&MemPhy,
+ sizeof (T3_SND_BD) *
+ T3_SEND_RCB_ENTRY_COUNT);
+ } else {
+ pDevice->pSendBdVirt = (PT3_SND_BD)
+ pDevice->pMemView->uIntMem.First32k.BufferDesc;
+ pDevice->SendBdPhy.High = 0;
+ pDevice->SendBdPhy.Low = T3_NIC_SND_BUFFER_DESC_ADDR;
+ }
+
+ /* Allocate memory for packet descriptors. */
+ Size = (pDevice->RxPacketDescCnt +
+ pDevice->TxPacketDescCnt) * MM_PACKET_DESC_SIZE;
+ Status = MM_AllocateMemory (pDevice, Size, (PLM_VOID *) & pPacket);
+ if (Status != LM_STATUS_SUCCESS) {
+ return Status;
+ }
+ pDevice->pPacketDescBase = (PLM_VOID) pPacket;
+
+ /* Create transmit packet descriptors from the memory block and add them */
+ /* to the TxPacketFreeQ for each send ring. */
+ for (j = 0; j < pDevice->TxPacketDescCnt; j++) {
+ /* Ring index. */
+ pPacket->Flags = 0;
+
+ /* Queue the descriptor in the TxPacketFreeQ of the 'k' ring. */
+ QQ_PushTail (&pDevice->TxPacketFreeQ.Container, pPacket);
+
+ /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */
+ /* is the total size of the packet descriptor including the */
+ /* os-specific extensions in the UM_PACKET structure. */
+ pPacket =
+ (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
+ } /* for(j.. */
+
+ /* Create receive packet descriptors from the memory block and add them */
+ /* to the RxPacketFreeQ. Create the Standard packet descriptors. */
+ for (j = 0; j < pDevice->RxStdDescCnt; j++) {
+ /* Receive producer ring. */
+ pPacket->u.Rx.RcvProdRing = T3_STD_RCV_PROD_RING;
+
+ /* Receive buffer size. */
+ pPacket->u.Rx.RxBufferSize = MAX_STD_RCV_BUFFER_SIZE;
+
+ /* Add the descriptor to RxPacketFreeQ. */
+ QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
+
+ /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */
+ /* is the total size of the packet descriptor including the */
+ /* os-specific extensions in the UM_PACKET structure. */
+ pPacket =
+ (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
+ } /* for */
+
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ /* Create the Jumbo packet descriptors. */
+ for (j = 0; j < pDevice->RxJumboDescCnt; j++) {
+ /* Receive producer ring. */
+ pPacket->u.Rx.RcvProdRing = T3_JUMBO_RCV_PROD_RING;
+
+ /* Receive buffer size. */
+ pPacket->u.Rx.RxBufferSize = pDevice->RxJumboBufferSize;
+
+ /* Add the descriptor to RxPacketFreeQ. */
+ QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
+
+ /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */
+ /* is the total size of the packet descriptor including the */
+ /* os-specific extensions in the UM_PACKET structure. */
+ pPacket =
+ (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
+ } /* for */
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+
+ /* Initialize the rest of the packet descriptors. */
+ Status = MM_InitializeUmPackets (pDevice);
+ if (Status != LM_STATUS_SUCCESS) {
+ return Status;
+ }
+
+ /* if */
+ /* Default receive mask. */
+ pDevice->ReceiveMask = LM_ACCEPT_MULTICAST | LM_ACCEPT_BROADCAST |
+ LM_ACCEPT_UNICAST;
+
+ /* Make sure we are in the first 32k memory window or NicSendBd. */
+ REG_WR (pDevice, PciCfg.MemWindowBaseAddr, 0);
+
+ /* Initialize the hardware. */
+ Status = LM_ResetAdapter (pDevice);
+ if (Status != LM_STATUS_SUCCESS) {
+ return Status;
+ }
+
+ /* We are done with initialization. */
+ pDevice->InitDone = TRUE;
+
+ return LM_STATUS_SUCCESS;
+} /* LM_InitializeAdapter */
+
+/******************************************************************************/
+/* Description: */
+/* This function Enables/Disables a given block. */
+/* */
+/* Return: */
+/* LM_STATUS_SUCCESS */
+/******************************************************************************/
+LM_STATUS
+LM_CntrlBlock (PLM_DEVICE_BLOCK pDevice, LM_UINT32 mask, LM_UINT32 cntrl)
+{
+ LM_UINT32 j, i, data;
+ LM_UINT32 MaxWaitCnt;
+
+ MaxWaitCnt = 2;
+ j = 0;
+
+ for (i = 0; i < 32; i++) {
+ if (!(mask & (1 << i)))
+ continue;
+
+ switch (1 << i) {
+ case T3_BLOCK_DMA_RD:
+ data = REG_RD (pDevice, DmaRead.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~DMA_READ_MODE_ENABLE;
+ REG_WR (pDevice, DmaRead.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, DmaRead.Mode) &
+ DMA_READ_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, DmaRead.Mode,
+ data | DMA_READ_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_DMA_COMP:
+ data = REG_RD (pDevice, DmaComp.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~DMA_COMP_MODE_ENABLE;
+ REG_WR (pDevice, DmaComp.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, DmaComp.Mode) &
+ DMA_COMP_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, DmaComp.Mode,
+ data | DMA_COMP_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_RX_BD_INITIATOR:
+ data = REG_RD (pDevice, RcvBdIn.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~RCV_BD_IN_MODE_ENABLE;
+ REG_WR (pDevice, RcvBdIn.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, RcvBdIn.Mode) &
+ RCV_BD_IN_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, RcvBdIn.Mode,
+ data | RCV_BD_IN_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_RX_BD_COMP:
+ data = REG_RD (pDevice, RcvBdComp.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~RCV_BD_COMP_MODE_ENABLE;
+ REG_WR (pDevice, RcvBdComp.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, RcvBdComp.Mode) &
+ RCV_BD_COMP_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, RcvBdComp.Mode,
+ data | RCV_BD_COMP_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_DMA_WR:
+ data = REG_RD (pDevice, DmaWrite.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~DMA_WRITE_MODE_ENABLE;
+ REG_WR (pDevice, DmaWrite.Mode, data);
+
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, DmaWrite.Mode) &
+ DMA_WRITE_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, DmaWrite.Mode,
+ data | DMA_WRITE_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_MSI_HANDLER:
+ data = REG_RD (pDevice, Msi.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~MSI_MODE_ENABLE;
+ REG_WR (pDevice, Msi.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, Msi.Mode) &
+ MSI_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, Msi.Mode,
+ data | MSI_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_RX_LIST_PLMT:
+ data = REG_RD (pDevice, RcvListPlmt.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~RCV_LIST_PLMT_MODE_ENABLE;
+ REG_WR (pDevice, RcvListPlmt.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, RcvListPlmt.Mode)
+ & RCV_LIST_PLMT_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, RcvListPlmt.Mode,
+ data | RCV_LIST_PLMT_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_RX_LIST_SELECTOR:
+ data = REG_RD (pDevice, RcvListSel.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~RCV_LIST_SEL_MODE_ENABLE;
+ REG_WR (pDevice, RcvListSel.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, RcvListSel.Mode) &
+ RCV_LIST_SEL_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, RcvListSel.Mode,
+ data | RCV_LIST_SEL_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_RX_DATA_INITIATOR:
+ data = REG_RD (pDevice, RcvDataBdIn.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~RCV_DATA_BD_IN_MODE_ENABLE;
+ REG_WR (pDevice, RcvDataBdIn.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, RcvDataBdIn.Mode)
+ & RCV_DATA_BD_IN_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, RcvDataBdIn.Mode,
+ data | RCV_DATA_BD_IN_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_RX_DATA_COMP:
+ data = REG_RD (pDevice, RcvDataComp.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~RCV_DATA_COMP_MODE_ENABLE;
+ REG_WR (pDevice, RcvDataComp.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, RcvDataBdIn.Mode)
+ & RCV_DATA_COMP_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, RcvDataComp.Mode,
+ data | RCV_DATA_COMP_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_HOST_COALESING:
+ data = REG_RD (pDevice, HostCoalesce.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~HOST_COALESCE_ENABLE;
+ REG_WR (pDevice, HostCoalesce.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, SndBdIn.Mode) &
+ HOST_COALESCE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, HostCoalesce.Mode,
+ data | HOST_COALESCE_ENABLE);
+ break;
+
+ case T3_BLOCK_MAC_RX_ENGINE:
+ if (cntrl == LM_DISABLE) {
+ pDevice->RxMode &= ~RX_MODE_ENABLE;
+ REG_WR (pDevice, MacCtrl.RxMode,
+ pDevice->RxMode);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, MacCtrl.RxMode) &
+ RX_MODE_ENABLE)) {
+ break;
+ }
+ MM_Wait (10);
+ }
+ } else {
+ pDevice->RxMode |= RX_MODE_ENABLE;
+ REG_WR (pDevice, MacCtrl.RxMode,
+ pDevice->RxMode);
+ }
+ break;
+
+ case T3_BLOCK_MBUF_CLUSTER_FREE:
+ data = REG_RD (pDevice, MbufClusterFree.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~MBUF_CLUSTER_FREE_MODE_ENABLE;
+ REG_WR (pDevice, MbufClusterFree.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD
+ (pDevice,
+ MbufClusterFree.
+ Mode) &
+ MBUF_CLUSTER_FREE_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, MbufClusterFree.Mode,
+ data | MBUF_CLUSTER_FREE_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_SEND_BD_INITIATOR:
+ data = REG_RD (pDevice, SndBdIn.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~SND_BD_IN_MODE_ENABLE;
+ REG_WR (pDevice, SndBdIn.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, SndBdIn.Mode) &
+ SND_BD_IN_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, SndBdIn.Mode,
+ data | SND_BD_IN_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_SEND_BD_COMP:
+ data = REG_RD (pDevice, SndBdComp.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~SND_BD_COMP_MODE_ENABLE;
+ REG_WR (pDevice, SndBdComp.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, SndBdComp.Mode) &
+ SND_BD_COMP_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, SndBdComp.Mode,
+ data | SND_BD_COMP_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_SEND_BD_SELECTOR:
+ data = REG_RD (pDevice, SndBdSel.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~SND_BD_SEL_MODE_ENABLE;
+ REG_WR (pDevice, SndBdSel.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, SndBdSel.Mode) &
+ SND_BD_SEL_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, SndBdSel.Mode,
+ data | SND_BD_SEL_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_SEND_DATA_INITIATOR:
+ data = REG_RD (pDevice, SndDataIn.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~T3_SND_DATA_IN_MODE_ENABLE;
+ REG_WR (pDevice, SndDataIn.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, SndDataIn.Mode) &
+ T3_SND_DATA_IN_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, SndDataIn.Mode,
+ data | T3_SND_DATA_IN_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_SEND_DATA_COMP:
+ data = REG_RD (pDevice, SndDataComp.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~SND_DATA_COMP_MODE_ENABLE;
+ REG_WR (pDevice, SndDataComp.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, SndDataComp.Mode)
+ & SND_DATA_COMP_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, SndDataComp.Mode,
+ data | SND_DATA_COMP_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_MAC_TX_ENGINE:
+ if (cntrl == LM_DISABLE) {
+ pDevice->TxMode &= ~TX_MODE_ENABLE;
+ REG_WR (pDevice, MacCtrl.TxMode,
+ pDevice->TxMode);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, MacCtrl.TxMode) &
+ TX_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else {
+ pDevice->TxMode |= TX_MODE_ENABLE;
+ REG_WR (pDevice, MacCtrl.TxMode,
+ pDevice->TxMode);
+ }
+ break;
+
+ case T3_BLOCK_MEM_ARBITOR:
+ data = REG_RD (pDevice, MemArbiter.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~T3_MEM_ARBITER_MODE_ENABLE;
+ REG_WR (pDevice, MemArbiter.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, MemArbiter.Mode) &
+ T3_MEM_ARBITER_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, MemArbiter.Mode,
+ data | T3_MEM_ARBITER_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_MBUF_MANAGER:
+ data = REG_RD (pDevice, BufMgr.Mode);
+ if (cntrl == LM_DISABLE) {
+ data &= ~BUFMGR_MODE_ENABLE;
+ REG_WR (pDevice, BufMgr.Mode, data);
+ for (j = 0; j < MaxWaitCnt; j++) {
+ if (!
+ (REG_RD (pDevice, BufMgr.Mode) &
+ BUFMGR_MODE_ENABLE))
+ break;
+ MM_Wait (10);
+ }
+ } else
+ REG_WR (pDevice, BufMgr.Mode,
+ data | BUFMGR_MODE_ENABLE);
+ break;
+
+ case T3_BLOCK_MAC_GLOBAL:
+ if (cntrl == LM_DISABLE) {
+ pDevice->MacMode &= ~(MAC_MODE_ENABLE_TDE |
+ MAC_MODE_ENABLE_RDE |
+ MAC_MODE_ENABLE_FHDE);
+ } else {
+ pDevice->MacMode |= (MAC_MODE_ENABLE_TDE |
+ MAC_MODE_ENABLE_RDE |
+ MAC_MODE_ENABLE_FHDE);
+ }
+ REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode);
+ break;
+
+ default:
+ return LM_STATUS_FAILURE;
+ } /* switch */
+
+ if (j >= MaxWaitCnt) {
+ return LM_STATUS_FAILURE;
+ }
+ }
+
+ return LM_STATUS_SUCCESS;
+}
+
+/******************************************************************************/
+/* Description: */
+/* This function reinitializes the adapter. */
+/* */
+/* Return: */
+/* LM_STATUS_SUCCESS */
+/******************************************************************************/
+LM_STATUS LM_ResetAdapter (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_UINT32 Value32;
+ LM_UINT16 Value16;
+ LM_UINT32 j, k;
+
+ /* Disable interrupt. */
+ LM_DisableInterrupt (pDevice);
+
+ /* May get a spurious interrupt */
+ pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED;
+
+ /* Disable transmit and receive DMA engines. Abort all pending requests. */
+ if (pDevice->InitDone) {
+ LM_Abort (pDevice);
+ }
+
+ pDevice->ShuttingDown = FALSE;
+
+ LM_ResetChip (pDevice);
+
+ /* Bug: Athlon fix for B3 silicon only. This bit does not do anything */
+ /* in other chip revisions. */
+ if (pDevice->DelayPciGrant) {
+ Value32 = REG_RD (pDevice, PciCfg.ClockCtrl);
+ REG_WR (pDevice, PciCfg.ClockCtrl, Value32 | BIT_31);
+ }
+
+ if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) {
+ if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) {
+ Value32 = REG_RD (pDevice, PciCfg.PciState);
+ Value32 |= T3_PCI_STATE_RETRY_SAME_DMA;
+ REG_WR (pDevice, PciCfg.PciState, Value32);
+ }
+ }
+
+ /* Enable TaggedStatus mode. */
+ if (pDevice->UseTaggedStatus) {
+ pDevice->MiscHostCtrl |=
+ MISC_HOST_CTRL_ENABLE_TAGGED_STATUS_MODE;
+ }
+
+ /* Restore PCI configuration registers. */
+ MM_WriteConfig32 (pDevice, PCI_CACHE_LINE_SIZE_REG,
+ pDevice->SavedCacheLineReg);
+ MM_WriteConfig32 (pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG,
+ (pDevice->SubsystemId << 16) | pDevice->
+ SubsystemVendorId);
+
+ /* Clear the statistics block. */
+ for (j = 0x0300; j < 0x0b00; j++) {
+ MEM_WR_OFFSET (pDevice, j, 0);
+ }
+
+ /* Initialize the statistis Block */
+ pDevice->pStatusBlkVirt->Status = 0;
+ pDevice->pStatusBlkVirt->RcvStdConIdx = 0;
+ pDevice->pStatusBlkVirt->RcvJumboConIdx = 0;
+ pDevice->pStatusBlkVirt->RcvMiniConIdx = 0;
+
+ for (j = 0; j < 16; j++) {
+ pDevice->pStatusBlkVirt->Idx[j].RcvProdIdx = 0;
+ pDevice->pStatusBlkVirt->Idx[j].SendConIdx = 0;
+ }
+
+ for (k = 0; k < T3_STD_RCV_RCB_ENTRY_COUNT; k++) {
+ pDevice->pRxStdBdVirt[k].HostAddr.High = 0;
+ pDevice->pRxStdBdVirt[k].HostAddr.Low = 0;
+ }
+
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ /* Receive jumbo BD buffer. */
+ for (k = 0; k < T3_JUMBO_RCV_RCB_ENTRY_COUNT; k++) {
+ pDevice->pRxJumboBdVirt[k].HostAddr.High = 0;
+ pDevice->pRxJumboBdVirt[k].HostAddr.Low = 0;
+ }
+#endif
+
+ REG_WR (pDevice, PciCfg.DmaReadWriteCtrl, pDevice->DmaReadWriteCtrl);
+
+ /* GRC mode control register. */
+#ifdef BIG_ENDIAN_PCI /* Jimmy, this ifdef block deleted in new code! */
+ Value32 =
+ GRC_MODE_WORD_SWAP_DATA |
+ GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
+ GRC_MODE_INT_ON_MAC_ATTN | GRC_MODE_HOST_STACK_UP;
+#else
+ /* No CPU Swap modes for PCI IO */
+ Value32 =
+#ifdef BIG_ENDIAN_HOST
+ GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
+ GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
+ GRC_MODE_BYTE_SWAP_DATA | GRC_MODE_WORD_SWAP_DATA |
+#else
+ GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
+ GRC_MODE_BYTE_SWAP_DATA | GRC_MODE_WORD_SWAP_DATA |
+#endif
+ GRC_MODE_INT_ON_MAC_ATTN | GRC_MODE_HOST_STACK_UP;
+#endif /* !BIG_ENDIAN_PCI */
+
+ /* Configure send BD mode. */
+ if (pDevice->NicSendBd == FALSE) {
+ Value32 |= GRC_MODE_HOST_SEND_BDS;
+ } else {
+ Value32 |= GRC_MODE_4X_NIC_BASED_SEND_RINGS;
+ }
+
+ /* Configure pseudo checksum mode. */
+ if (pDevice->NoTxPseudoHdrChksum) {
+ Value32 |= GRC_MODE_TX_NO_PSEUDO_HEADER_CHKSUM;
+ }
+
+ if (pDevice->NoRxPseudoHdrChksum) {
+ Value32 |= GRC_MODE_RX_NO_PSEUDO_HEADER_CHKSUM;
+ }
+
+ REG_WR (pDevice, Grc.Mode, Value32);
+
+ /* Setup the timer prescalar register. */
+ REG_WR (pDevice, Grc.MiscCfg, 65 << 1); /* Clock is alwasy 66Mhz. */
+
+ /* Set up the MBUF pool base address and size. */
+ REG_WR (pDevice, BufMgr.MbufPoolAddr, pDevice->MbufBase);
+ REG_WR (pDevice, BufMgr.MbufPoolSize, pDevice->MbufSize);
+
+ /* Set up the DMA descriptor pool base address and size. */
+ REG_WR (pDevice, BufMgr.DmaDescPoolAddr, T3_NIC_DMA_DESC_POOL_ADDR);
+ REG_WR (pDevice, BufMgr.DmaDescPoolSize, T3_NIC_DMA_DESC_POOL_SIZE);
+
+ /* Configure MBUF and Threshold watermarks */
+ /* Configure the DMA read MBUF low water mark. */
+ if (pDevice->DmaMbufLowMark) {
+ REG_WR (pDevice, BufMgr.MbufReadDmaLowWaterMark,
+ pDevice->DmaMbufLowMark);
+ } else {
+ if (pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) {
+ REG_WR (pDevice, BufMgr.MbufReadDmaLowWaterMark,
+ T3_DEF_DMA_MBUF_LOW_WMARK);
+ } else {
+ REG_WR (pDevice, BufMgr.MbufReadDmaLowWaterMark,
+ T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO);
+ }
+ }
+
+ /* Configure the MAC Rx MBUF low water mark. */
+ if (pDevice->RxMacMbufLowMark) {
+ REG_WR (pDevice, BufMgr.MbufMacRxLowWaterMark,
+ pDevice->RxMacMbufLowMark);
+ } else {
+ if (pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) {
+ REG_WR (pDevice, BufMgr.MbufMacRxLowWaterMark,
+ T3_DEF_RX_MAC_MBUF_LOW_WMARK);
+ } else {
+ REG_WR (pDevice, BufMgr.MbufMacRxLowWaterMark,
+ T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO);
+ }
+ }
+
+ /* Configure the MBUF high water mark. */
+ if (pDevice->MbufHighMark) {
+ REG_WR (pDevice, BufMgr.MbufHighWaterMark,
+ pDevice->MbufHighMark);
+ } else {
+ if (pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) {
+ REG_WR (pDevice, BufMgr.MbufHighWaterMark,
+ T3_DEF_MBUF_HIGH_WMARK);
+ } else {
+ REG_WR (pDevice, BufMgr.MbufHighWaterMark,
+ T3_DEF_MBUF_HIGH_WMARK_JUMBO);
+ }
+ }
+
+ REG_WR (pDevice, BufMgr.DmaLowWaterMark, T3_DEF_DMA_DESC_LOW_WMARK);
+ REG_WR (pDevice, BufMgr.DmaHighWaterMark, T3_DEF_DMA_DESC_HIGH_WMARK);
+
+ /* Enable buffer manager. */
+ REG_WR (pDevice, BufMgr.Mode,
+ BUFMGR_MODE_ENABLE | BUFMGR_MODE_ATTN_ENABLE);
+
+ for (j = 0; j < 2000; j++) {
+ if (REG_RD (pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE)
+ break;
+ MM_Wait (10);
+ }
+
+ if (j >= 2000) {
+ return LM_STATUS_FAILURE;
+ }
+
+ /* Enable the FTQs. */
+ REG_WR (pDevice, Ftq.Reset, 0xffffffff);
+ REG_WR (pDevice, Ftq.Reset, 0);
+
+ /* Wait until FTQ is ready */
+ for (j = 0; j < 2000; j++) {
+ if (REG_RD (pDevice, Ftq.Reset) == 0)
+ break;
+ MM_Wait (10);
+ }
+
+ if (j >= 2000) {
+ return LM_STATUS_FAILURE;
+ }
+
+ /* Initialize the Standard Receive RCB. */
+ REG_WR (pDevice, RcvDataBdIn.StdRcvRcb.HostRingAddr.High,
+ pDevice->RxStdBdPhy.High);
+ REG_WR (pDevice, RcvDataBdIn.StdRcvRcb.HostRingAddr.Low,
+ pDevice->RxStdBdPhy.Low);
+ REG_WR (pDevice, RcvDataBdIn.StdRcvRcb.u.MaxLen_Flags,
+ MAX_STD_RCV_BUFFER_SIZE << 16);
+
+ /* Initialize the Jumbo Receive RCB. */
+ REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.u.MaxLen_Flags,
+ T3_RCB_FLAG_RING_DISABLED);
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.HostRingAddr.High,
+ pDevice->RxJumboBdPhy.High);
+ REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.HostRingAddr.Low,
+ pDevice->RxJumboBdPhy.Low);
+
+ REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.u.MaxLen_Flags, 0);
+
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+
+ /* Initialize the Mini Receive RCB. */
+ REG_WR (pDevice, RcvDataBdIn.MiniRcvRcb.u.MaxLen_Flags,
+ T3_RCB_FLAG_RING_DISABLED);
+
+ {
+ REG_WR (pDevice, RcvDataBdIn.StdRcvRcb.NicRingAddr,
+ (LM_UINT32) T3_NIC_STD_RCV_BUFFER_DESC_ADDR);
+ REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.NicRingAddr,
+ (LM_UINT32) T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR);
+ }
+
+ /* Receive BD Ring replenish threshold. */
+ REG_WR (pDevice, RcvBdIn.StdRcvThreshold, pDevice->RxStdDescCnt / 8);
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ REG_WR (pDevice, RcvBdIn.JumboRcvThreshold,
+ pDevice->RxJumboDescCnt / 8);
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+
+ /* Disable all the unused rings. */
+ for (j = 0; j < T3_MAX_SEND_RCB_COUNT; j++) {
+ MEM_WR (pDevice, SendRcb[j].u.MaxLen_Flags,
+ T3_RCB_FLAG_RING_DISABLED);
+ } /* for */
+
+ /* Initialize the indices. */
+ pDevice->SendProdIdx = 0;
+ pDevice->SendConIdx = 0;
+
+ MB_REG_WR (pDevice, Mailbox.SendHostProdIdx[0].Low, 0);
+ MB_REG_WR (pDevice, Mailbox.SendNicProdIdx[0].Low, 0);
+
+ /* Set up host or NIC based send RCB. */
+ if (pDevice->NicSendBd == FALSE) {
+ MEM_WR (pDevice, SendRcb[0].HostRingAddr.High,
+ pDevice->SendBdPhy.High);
+ MEM_WR (pDevice, SendRcb[0].HostRingAddr.Low,
+ pDevice->SendBdPhy.Low);
+
+ /* Set up the NIC ring address in the RCB. */
+ MEM_WR (pDevice, SendRcb[0].NicRingAddr,
+ T3_NIC_SND_BUFFER_DESC_ADDR);
+
+ /* Setup the RCB. */
+ MEM_WR (pDevice, SendRcb[0].u.MaxLen_Flags,
+ T3_SEND_RCB_ENTRY_COUNT << 16);
+
+ for (k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++) {
+ pDevice->pSendBdVirt[k].HostAddr.High = 0;
+ pDevice->pSendBdVirt[k].HostAddr.Low = 0;
+ }
+ } else {
+ MEM_WR (pDevice, SendRcb[0].HostRingAddr.High, 0);
+ MEM_WR (pDevice, SendRcb[0].HostRingAddr.Low, 0);
+ MEM_WR (pDevice, SendRcb[0].NicRingAddr,
+ pDevice->SendBdPhy.Low);
+
+ for (k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++) {
+ __raw_writel (0,
+ &(pDevice->pSendBdVirt[k].HostAddr.High));
+ __raw_writel (0,
+ &(pDevice->pSendBdVirt[k].HostAddr.Low));
+ __raw_writel (0,
+ &(pDevice->pSendBdVirt[k].u1.Len_Flags));
+ pDevice->ShadowSendBd[k].HostAddr.High = 0;
+ pDevice->ShadowSendBd[k].u1.Len_Flags = 0;
+ }
+ }
+ atomic_set (&pDevice->SendBdLeft, T3_SEND_RCB_ENTRY_COUNT - 1);
+
+ /* Configure the receive return rings. */
+ for (j = 0; j < T3_MAX_RCV_RETURN_RCB_COUNT; j++) {
+ MEM_WR (pDevice, RcvRetRcb[j].u.MaxLen_Flags,
+ T3_RCB_FLAG_RING_DISABLED);
+ }
+
+ pDevice->RcvRetConIdx = 0;
+
+ MEM_WR (pDevice, RcvRetRcb[0].HostRingAddr.High,
+ pDevice->RcvRetBdPhy.High);
+ MEM_WR (pDevice, RcvRetRcb[0].HostRingAddr.Low,
+ pDevice->RcvRetBdPhy.Low);
+
+ /* Set up the NIC ring address in the RCB. */
+ /* Not very clear from the spec. I am guessing that for Receive */
+ /* Return Ring, NicRingAddr is not used. */
+ MEM_WR (pDevice, RcvRetRcb[0].NicRingAddr, 0);
+
+ /* Setup the RCB. */
+ MEM_WR (pDevice, RcvRetRcb[0].u.MaxLen_Flags,
+ T3_RCV_RETURN_RCB_ENTRY_COUNT << 16);
+
+ /* Reinitialize RX ring producer index */
+ MB_REG_WR (pDevice, Mailbox.RcvStdProdIdx.Low, 0);
+ MB_REG_WR (pDevice, Mailbox.RcvJumboProdIdx.Low, 0);
+ MB_REG_WR (pDevice, Mailbox.RcvMiniProdIdx.Low, 0);
+
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ pDevice->RxJumboProdIdx = 0;
+ pDevice->RxJumboQueuedCnt = 0;
+#endif
+
+ /* Reinitialize our copy of the indices. */
+ pDevice->RxStdProdIdx = 0;
+ pDevice->RxStdQueuedCnt = 0;
+
+#if T3_JUMBO_RCV_ENTRY_COUNT
+ pDevice->RxJumboProdIdx = 0;
+#endif /* T3_JUMBO_RCV_ENTRY_COUNT */
+
+ /* Configure the MAC address. */
+ LM_SetMacAddress (pDevice, pDevice->NodeAddress);
+
+ /* Initialize the transmit random backoff seed. */
+ Value32 = (pDevice->NodeAddress[0] + pDevice->NodeAddress[1] +
+ pDevice->NodeAddress[2] + pDevice->NodeAddress[3] +
+ pDevice->NodeAddress[4] + pDevice->NodeAddress[5]) &
+ MAC_TX_BACKOFF_SEED_MASK;
+ REG_WR (pDevice, MacCtrl.TxBackoffSeed, Value32);
+
+ /* Receive MTU. Frames larger than the MTU is marked as oversized. */
+ REG_WR (pDevice, MacCtrl.MtuSize, pDevice->RxMtu + 8); /* CRC + VLAN. */
+
+ /* Configure Time slot/IPG per 802.3 */
+ REG_WR (pDevice, MacCtrl.TxLengths, 0x2620);
+
+ /*
+ * Configure Receive Rules so that packets don't match
+ * Programmble rule will be queued to Return Ring 1
+ */
+ REG_WR (pDevice, MacCtrl.RcvRuleCfg, RX_RULE_DEFAULT_CLASS);
+
+ /*
+ * Configure to have 16 Classes of Services (COS) and one
+ * queue per class. Bad frames are queued to RRR#1.
+ * And frames don't match rules are also queued to COS#1.
+ */
+ REG_WR (pDevice, RcvListPlmt.Config, 0x181);
+
+ /* Enable Receive Placement Statistics */
+ REG_WR (pDevice, RcvListPlmt.StatsEnableMask, 0xffffff);
+ REG_WR (pDevice, RcvListPlmt.StatsCtrl, RCV_LIST_STATS_ENABLE);
+
+ /* Enable Send Data Initator Statistics */
+ REG_WR (pDevice, SndDataIn.StatsEnableMask, 0xffffff);
+ REG_WR (pDevice, SndDataIn.StatsCtrl,
+ T3_SND_DATA_IN_STATS_CTRL_ENABLE |
+ T3_SND_DATA_IN_STATS_CTRL_FASTER_UPDATE);
+
+ /* Disable the host coalescing state machine before configuring it's */
+ /* parameters. */
+ REG_WR (pDevice, HostCoalesce.Mode, 0);
+ for (j = 0; j < 2000; j++) {
+ Value32 = REG_RD (pDevice, HostCoalesce.Mode);
+ if (!(Value32 & HOST_COALESCE_ENABLE)) {
+ break;
+ }
+ MM_Wait (10);
+ }
+
+ /* Host coalescing configurations. */
+ REG_WR (pDevice, HostCoalesce.RxCoalescingTicks,
+ pDevice->RxCoalescingTicks);
+ REG_WR (pDevice, HostCoalesce.TxCoalescingTicks,
+ pDevice->TxCoalescingTicks);
+ REG_WR (pDevice, HostCoalesce.RxMaxCoalescedFrames,
+ pDevice->RxMaxCoalescedFrames);
+ REG_WR (pDevice, HostCoalesce.TxMaxCoalescedFrames,
+ pDevice->TxMaxCoalescedFrames);
+ REG_WR (pDevice, HostCoalesce.RxCoalescedTickDuringInt,
+ pDevice->RxCoalescingTicksDuringInt);
+ REG_WR (pDevice, HostCoalesce.TxCoalescedTickDuringInt,
+ pDevice->TxCoalescingTicksDuringInt);
+ REG_WR (pDevice, HostCoalesce.RxMaxCoalescedFramesDuringInt,
+ pDevice->RxMaxCoalescedFramesDuringInt);
+ REG_WR (pDevice, HostCoalesce.TxMaxCoalescedFramesDuringInt,
+ pDevice->TxMaxCoalescedFramesDuringInt);
+
+ /* Initialize the address of the status block. The NIC will DMA */
+ /* the status block to this memory which resides on the host. */
+ REG_WR (pDevice, HostCoalesce.StatusBlkHostAddr.High,
+ pDevice->StatusBlkPhy.High);
+ REG_WR (pDevice, HostCoalesce.StatusBlkHostAddr.Low,
+ pDevice->StatusBlkPhy.Low);
+
+ /* Initialize the address of the statistics block. The NIC will DMA */
+ /* the statistics to this block of memory. */
+ REG_WR (pDevice, HostCoalesce.StatsBlkHostAddr.High,
+ pDevice->StatsBlkPhy.High);
+ REG_WR (pDevice, HostCoalesce.StatsBlkHostAddr.Low,
+ pDevice->StatsBlkPhy.Low);
+
+ REG_WR (pDevice, HostCoalesce.StatsCoalescingTicks,
+ pDevice->StatsCoalescingTicks);
+
+ REG_WR (pDevice, HostCoalesce.StatsBlkNicAddr, 0x300);
+ REG_WR (pDevice, HostCoalesce.StatusBlkNicAddr, 0xb00);
+
+ /* Enable Host Coalesing state machine */
+ REG_WR (pDevice, HostCoalesce.Mode, HOST_COALESCE_ENABLE |
+ pDevice->CoalesceMode);
+
+ /* Enable the Receive BD Completion state machine. */
+ REG_WR (pDevice, RcvBdComp.Mode, RCV_BD_COMP_MODE_ENABLE |
+ RCV_BD_COMP_MODE_ATTN_ENABLE);
+
+ /* Enable the Receive List Placement state machine. */
+ REG_WR (pDevice, RcvListPlmt.Mode, RCV_LIST_PLMT_MODE_ENABLE);
+
+ /* Enable the Receive List Selector state machine. */
+ REG_WR (pDevice, RcvListSel.Mode, RCV_LIST_SEL_MODE_ENABLE |
+ RCV_LIST_SEL_MODE_ATTN_ENABLE);
+
+ /* Enable transmit DMA, clear statistics. */
+ pDevice->MacMode = MAC_MODE_ENABLE_TX_STATISTICS |
+ MAC_MODE_ENABLE_RX_STATISTICS | MAC_MODE_ENABLE_TDE |
+ MAC_MODE_ENABLE_RDE | MAC_MODE_ENABLE_FHDE;
+ REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode |
+ MAC_MODE_CLEAR_RX_STATISTICS | MAC_MODE_CLEAR_TX_STATISTICS);
+
+ /* GRC miscellaneous local control register. */
+ pDevice->GrcLocalCtrl = GRC_MISC_LOCAL_CTRL_INT_ON_ATTN |
+ GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM;
+
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
+ pDevice->GrcLocalCtrl |= GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1;
+ }
+
+ REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl);
+ MM_Wait (40);
+
+ /* Reset RX counters. */
+ for (j = 0; j < sizeof (LM_RX_COUNTERS); j++) {
+ ((PLM_UINT8) & pDevice->RxCounters)[j] = 0;
+ }
+
+ /* Reset TX counters. */
+ for (j = 0; j < sizeof (LM_TX_COUNTERS); j++) {
+ ((PLM_UINT8) & pDevice->TxCounters)[j] = 0;
+ }
+
+ MB_REG_WR (pDevice, Mailbox.Interrupt[0].Low, 0);
+
+ /* Enable the DMA Completion state machine. */
+ REG_WR (pDevice, DmaComp.Mode, DMA_COMP_MODE_ENABLE);
+
+ /* Enable the DMA Write state machine. */
+ Value32 = DMA_WRITE_MODE_ENABLE |
+ DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE |
+ DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE |
+ DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE |
+ DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE |
+ DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE |
+ DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE |
+ DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE |
+ DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE;
+ REG_WR (pDevice, DmaWrite.Mode, Value32);
+
+ if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) {
+ if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) {
+ Value16 = REG_RD (pDevice, PciCfg.PciXCommand);
+ Value16 &=
+ ~(PCIX_CMD_MAX_SPLIT_MASK |
+ PCIX_CMD_MAX_BURST_MASK);
+ Value16 |=
+ ((PCIX_CMD_MAX_BURST_CPIOB <<
+ PCIX_CMD_MAX_BURST_SHL) &
+ PCIX_CMD_MAX_BURST_MASK);
+ if (pDevice->SplitModeEnable == SPLIT_MODE_ENABLE) {
+ Value16 |=
+ (pDevice->
+ SplitModeMaxReq << PCIX_CMD_MAX_SPLIT_SHL)
+ & PCIX_CMD_MAX_SPLIT_MASK;
+ }
+ REG_WR (pDevice, PciCfg.PciXCommand, Value16);
+ }
+ }
+
+ /* Enable the Read DMA state machine. */
+ Value32 = DMA_READ_MODE_ENABLE |
+ DMA_READ_MODE_TARGET_ABORT_ATTN_ENABLE |
+ DMA_READ_MODE_MASTER_ABORT_ATTN_ENABLE |
+ DMA_READ_MODE_PARITY_ERROR_ATTN_ENABLE |
+ DMA_READ_MODE_ADDR_OVERFLOW_ATTN_ENABLE |
+ DMA_READ_MODE_FIFO_OVERRUN_ATTN_ENABLE |
+ DMA_READ_MODE_FIFO_UNDERRUN_ATTN_ENABLE |
+ DMA_READ_MODE_FIFO_OVERREAD_ATTN_ENABLE |
+ DMA_READ_MODE_LONG_READ_ATTN_ENABLE;
+
+ if (pDevice->SplitModeEnable == SPLIT_MODE_ENABLE) {
+ Value32 |= DMA_READ_MODE_SPLIT_ENABLE;
+ }
+ REG_WR (pDevice, DmaRead.Mode, Value32);
+
+ /* Enable the Receive Data Completion state machine. */
+ REG_WR (pDevice, RcvDataComp.Mode, RCV_DATA_COMP_MODE_ENABLE |
+ RCV_DATA_COMP_MODE_ATTN_ENABLE);
+
+ /* Enable the Mbuf Cluster Free state machine. */
+ REG_WR (pDevice, MbufClusterFree.Mode, MBUF_CLUSTER_FREE_MODE_ENABLE);
+
+ /* Enable the Send Data Completion state machine. */
+ REG_WR (pDevice, SndDataComp.Mode, SND_DATA_COMP_MODE_ENABLE);
+
+ /* Enable the Send BD Completion state machine. */
+ REG_WR (pDevice, SndBdComp.Mode, SND_BD_COMP_MODE_ENABLE |
+ SND_BD_COMP_MODE_ATTN_ENABLE);
+
+ /* Enable the Receive BD Initiator state machine. */
+ REG_WR (pDevice, RcvBdIn.Mode, RCV_BD_IN_MODE_ENABLE |
+ RCV_BD_IN_MODE_BD_IN_DIABLED_RCB_ATTN_ENABLE);
+
+ /* Enable the Receive Data and Receive BD Initiator state machine. */
+ REG_WR (pDevice, RcvDataBdIn.Mode, RCV_DATA_BD_IN_MODE_ENABLE |
+ RCV_DATA_BD_IN_MODE_INVALID_RING_SIZE);
+
+ /* Enable the Send Data Initiator state machine. */
+ REG_WR (pDevice, SndDataIn.Mode, T3_SND_DATA_IN_MODE_ENABLE);
+
+ /* Enable the Send BD Initiator state machine. */
+ REG_WR (pDevice, SndBdIn.Mode, SND_BD_IN_MODE_ENABLE |
+ SND_BD_IN_MODE_ATTN_ENABLE);
+
+ /* Enable the Send BD Selector state machine. */
+ REG_WR (pDevice, SndBdSel.Mode, SND_BD_SEL_MODE_ENABLE |
+ SND_BD_SEL_MODE_ATTN_ENABLE);
+
+#if INCLUDE_5701_AX_FIX
+ /* Load the firmware for the 5701_A0 workaround. */
+ if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0) {
+ LM_LoadRlsFirmware (pDevice);
+ }
+#endif
+
+ /* Enable the transmitter. */
+ pDevice->TxMode = TX_MODE_ENABLE;
+ REG_WR (pDevice, MacCtrl.TxMode, pDevice->TxMode);
+
+ /* Enable the receiver. */
+ pDevice->RxMode = RX_MODE_ENABLE;
+ REG_WR (pDevice, MacCtrl.RxMode, pDevice->RxMode);
+
+ if (pDevice->RestoreOnWakeUp) {
+ pDevice->RestoreOnWakeUp = FALSE;
+ pDevice->DisableAutoNeg = pDevice->WakeUpDisableAutoNeg;
+ pDevice->RequestedMediaType = pDevice->WakeUpRequestedMediaType;
+ }
+
+ /* Disable auto polling. */
+ pDevice->MiMode = 0xc0000;
+ REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode);
+
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ Value32 = LED_CTRL_PHY_MODE_1;
+ } else {
+ if (pDevice->LedMode == LED_MODE_OUTPUT) {
+ Value32 = LED_CTRL_PHY_MODE_2;
+ } else {
+ Value32 = LED_CTRL_PHY_MODE_1;
+ }
+ }
+ REG_WR (pDevice, MacCtrl.LedCtrl, Value32);
+
+ /* Activate Link to enable MAC state machine */
+ REG_WR (pDevice, MacCtrl.MiStatus, MI_STATUS_ENABLE_LINK_STATUS_ATTN);
+
+ if (pDevice->EnableTbi) {
+ REG_WR (pDevice, MacCtrl.RxMode, RX_MODE_RESET);
+ MM_Wait (10);
+ REG_WR (pDevice, MacCtrl.RxMode, pDevice->RxMode);
+ if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1) {
+ REG_WR (pDevice, MacCtrl.SerdesCfg, 0x616000);
+ }
+ }
+ /* Setup the phy chip. */
+ LM_SetupPhy (pDevice);
+
+ if (!pDevice->EnableTbi) {
+ /* Clear CRC stats */
+ LM_ReadPhy (pDevice, 0x1e, &Value32);
+ LM_WritePhy (pDevice, 0x1e, Value32 | 0x8000);
+ LM_ReadPhy (pDevice, 0x14, &Value32);
+ }
+
+ /* Set up the receive mask. */
+ LM_SetReceiveMask (pDevice, pDevice->ReceiveMask);
+
+ /* Queue Rx packet buffers. */
+ if (pDevice->QueueRxPackets) {
+ LM_QueueRxPackets (pDevice);
+ }
+
+ /* Enable interrupt to the host. */
+ if (pDevice->InitDone) {
+ LM_EnableInterrupt (pDevice);
+ }
+
+ return LM_STATUS_SUCCESS;
+} /* LM_ResetAdapter */
+
+/******************************************************************************/
+/* Description: */
+/* This routine disables the adapter from generating interrupts. */
+/* */
+/* Return: */
+/* LM_STATUS_SUCCESS */
+/******************************************************************************/
+LM_STATUS LM_DisableInterrupt (PLM_DEVICE_BLOCK pDevice)
+{
+ REG_WR (pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl |
+ MISC_HOST_CTRL_MASK_PCI_INT);
+ MB_REG_WR (pDevice, Mailbox.Interrupt[0].Low, 1);
+
+ return LM_STATUS_SUCCESS;
+}
+
+/******************************************************************************/
+/* Description: */
+/* This routine enables the adapter to generate interrupts. */
+/* */
+/* Return: */
+/* LM_STATUS_SUCCESS */
+/******************************************************************************/
+LM_STATUS LM_EnableInterrupt (PLM_DEVICE_BLOCK pDevice)
+{
+ REG_WR (pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl &
+ ~MISC_HOST_CTRL_MASK_PCI_INT);
+ MB_REG_WR (pDevice, Mailbox.Interrupt[0].Low, 0);
+
+ if (pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) {
+ REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
+ GRC_MISC_LOCAL_CTRL_SET_INT);
+ }
+
+ return LM_STATUS_SUCCESS;
+}
+
+/******************************************************************************/
+/* Description: */
+/* This routine puts a packet on the wire if there is a transmit DMA */
+/* descriptor available; otherwise the packet is queued for later */
+/* transmission. If the second argue is NULL, this routine will put */
+/* the queued packet on the wire if possible. */
+/* */
+/* Return: */
+/* LM_STATUS_SUCCESS */
+/******************************************************************************/
+#if 0
+LM_STATUS LM_SendPacket (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
+{
+ LM_UINT32 FragCount;
+ PT3_SND_BD pSendBd;
+ PT3_SND_BD pShadowSendBd;
+ LM_UINT32 Value32, Len;
+ LM_UINT32 Idx;
+
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
+ return LM_5700SendPacket (pDevice, pPacket);
+ }
+
+ /* Update the SendBdLeft count. */
+ atomic_sub (pPacket->u.Tx.FragCount, &pDevice->SendBdLeft);
+
+ /* Initalize the send buffer descriptors. */
+ Idx = pDevice->SendProdIdx;
+
+ pSendBd = &pDevice->pSendBdVirt[Idx];
+
+ /* Next producer index. */
+ if (pDevice->NicSendBd == TRUE) {
+ T3_64BIT_HOST_ADDR paddr;
+
+ pShadowSendBd = &pDevice->ShadowSendBd[Idx];
+ for (FragCount = 0;;) {
+ MM_MapTxDma (pDevice, pPacket, &paddr, &Len, FragCount);
+ /* Initialize the pointer to the send buffer fragment. */
+ if (paddr.High != pShadowSendBd->HostAddr.High) {
+ __raw_writel (paddr.High,
+ &(pSendBd->HostAddr.High));
+ pShadowSendBd->HostAddr.High = paddr.High;
+ }
+ __raw_writel (paddr.Low, &(pSendBd->HostAddr.Low));
+
+ /* Setup the control flags and send buffer size. */
+ Value32 = (Len << 16) | pPacket->Flags;
+
+ Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
+
+ FragCount++;
+ if (FragCount >= pPacket->u.Tx.FragCount) {
+ Value32 |= SND_BD_FLAG_END;
+ if (Value32 != pShadowSendBd->u1.Len_Flags) {
+ __raw_writel (Value32,
+ &(pSendBd->u1.Len_Flags));
+ pShadowSendBd->u1.Len_Flags = Value32;
+ }
+ if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) {
+ __raw_writel (pPacket->VlanTag,
+ &(pSendBd->u2.VlanTag));
+ }
+ break;
+ } else {
+ if (Value32 != pShadowSendBd->u1.Len_Flags) {
+ __raw_writel (Value32,
+ &(pSendBd->u1.Len_Flags));
+ pShadowSendBd->u1.Len_Flags = Value32;
+ }
+ if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) {
+ __raw_writel (pPacket->VlanTag,
+ &(pSendBd->u2.VlanTag));
+ }
+ }
+
+ pSendBd++;
+ pShadowSendBd++;
+ if (Idx == 0) {
+ pSendBd = &pDevice->pSendBdVirt[0];
+ pShadowSendBd = &pDevice->ShadowSendBd[0];
+ }
+ } /* for */
+
+ /* Put the packet descriptor in the ActiveQ. */
+ QQ_PushTail (&pDevice->TxPacketActiveQ.Container, pPacket);
+
+ wmb ();
+ MB_REG_WR (pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
+
+ } else {
+ for (FragCount = 0;;) {
+ /* Initialize the pointer to the send buffer fragment. */
+ MM_MapTxDma (pDevice, pPacket, &pSendBd->HostAddr, &Len,
+ FragCount);
+
+ pSendBd->u2.VlanTag = pPacket->VlanTag;
+
+ /* Setup the control flags and send buffer size. */
+ Value32 = (Len << 16) | pPacket->Flags;
+
+ Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
+
+ FragCount++;
+ if (FragCount >= pPacket->u.Tx.FragCount) {
+ pSendBd->u1.Len_Flags =
+ Value32 | SND_BD_FLAG_END;
+ break;
+ } else {
+ pSendBd->u1.Len_Flags = Value32;
+ }
+ pSendBd++;
+ if (Idx == 0) {
+ pSendBd = &pDevice->pSendBdVirt[0];
+ }
+ } /* for */
+
+ /* Put the packet descriptor in the ActiveQ. */
+ QQ_PushTail (&pDevice->TxPacketActiveQ.Container, pPacket);
+
+ wmb ();
+ MB_REG_WR (pDevice, Mailbox.SendHostProdIdx[0].Low, Idx);
+
+ }
+
+ /* Update the producer index. */
+ pDevice->SendProdIdx = Idx;
+
+ return LM_STATUS_SUCCESS;
+}
+#endif
+
+LM_STATUS LM_SendPacket (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
+{
+ LM_UINT32 FragCount;
+ PT3_SND_BD pSendBd, pTmpSendBd, pShadowSendBd;
+ T3_SND_BD NicSendBdArr[MAX_FRAGMENT_COUNT];
+ LM_UINT32 StartIdx, Idx;
+
+ while (1) {
+ /* Initalize the send buffer descriptors. */
+ StartIdx = Idx = pDevice->SendProdIdx;
+
+ if (pDevice->NicSendBd) {
+ pTmpSendBd = pSendBd = &NicSendBdArr[0];
+ } else {
+ pTmpSendBd = pSendBd = &pDevice->pSendBdVirt[Idx];
+ }
+
+ /* Next producer index. */
+ for (FragCount = 0;;) {
+ LM_UINT32 Value32, Len;
+
+ /* Initialize the pointer to the send buffer fragment. */
+ MM_MapTxDma (pDevice, pPacket, &pSendBd->HostAddr, &Len,
+ FragCount);
+
+ pSendBd->u2.VlanTag = pPacket->VlanTag;
+
+ /* Setup the control flags and send buffer size. */
+ Value32 = (Len << 16) | pPacket->Flags;
+
+ Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
+
+ FragCount++;
+ if (FragCount >= pPacket->u.Tx.FragCount) {
+ pSendBd->u1.Len_Flags =
+ Value32 | SND_BD_FLAG_END;
+ break;
+ } else {
+ pSendBd->u1.Len_Flags = Value32;
+ }
+ pSendBd++;
+ if ((Idx == 0) && !pDevice->NicSendBd) {
+ pSendBd = &pDevice->pSendBdVirt[0];
+ }
+ } /* for */
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
+ if (LM_Test4GBoundary (pDevice, pPacket, pTmpSendBd) ==
+ LM_STATUS_SUCCESS) {
+ if (MM_CoalesceTxBuffer (pDevice, pPacket) !=
+ LM_STATUS_SUCCESS) {
+ QQ_PushHead (&pDevice->TxPacketFreeQ.
+ Container, pPacket);
+ return LM_STATUS_FAILURE;
+ }
+ continue;
+ }
+ }
+ break;
+ }
+ /* Put the packet descriptor in the ActiveQ. */
+ QQ_PushTail (&pDevice->TxPacketActiveQ.Container, pPacket);
+
+ if (pDevice->NicSendBd) {
+ pSendBd = &pDevice->pSendBdVirt[StartIdx];
+ pShadowSendBd = &pDevice->ShadowSendBd[StartIdx];
+
+ while (StartIdx != Idx) {
+ LM_UINT32 Value32;
+
+ if ((Value32 = pTmpSendBd->HostAddr.High) !=
+ pShadowSendBd->HostAddr.High) {
+ __raw_writel (Value32,
+ &(pSendBd->HostAddr.High));
+ pShadowSendBd->HostAddr.High = Value32;
+ }
+
+ __raw_writel (pTmpSendBd->HostAddr.Low,
+ &(pSendBd->HostAddr.Low));
+
+ if ((Value32 = pTmpSendBd->u1.Len_Flags) !=
+ pShadowSendBd->u1.Len_Flags) {
+ __raw_writel (Value32,
+ &(pSendBd->u1.Len_Flags));
+ pShadowSendBd->u1.Len_Flags = Value32;
+ }
+
+ if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) {
+ __raw_writel (pTmpSendBd->u2.VlanTag,
+ &(pSendBd->u2.VlanTag));
+ }
+
+ StartIdx =
+ (StartIdx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
+ if (StartIdx == 0)
+ pSendBd = &pDevice->pSendBdVirt[0];
+ else
+ pSendBd++;
+ pTmpSendBd++;
+ }
+ wmb ();
+ MB_REG_WR (pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
+
+ if (T3_CHIP_REV (pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) {
+ MB_REG_WR (pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
+ }
+ } else {
+ wmb ();
+ MB_REG_WR (pDevice, Mailbox.SendHostProdIdx[0].Low, Idx);
+
+ if (T3_CHIP_REV (pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) {
+ MB_REG_WR (pDevice, Mailbox.SendHostProdIdx[0].Low,
+ Idx);
+ }
+ }
+
+ /* Update the SendBdLeft count. */
+ atomic_sub (pPacket->u.Tx.FragCount, &pDevice->SendBdLeft);
+
+ /* Update the producer index. */
+ pDevice->SendProdIdx = Idx;
+
+ return LM_STATUS_SUCCESS;
+}
+
+STATIC LM_STATUS
+LM_Test4GBoundary (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket,
+ PT3_SND_BD pSendBd)
+{
+ int FragCount;
+ LM_UINT32 Idx, Base, Len;
+
+ Idx = pDevice->SendProdIdx;
+ for (FragCount = 0;;) {
+ Len = pSendBd->u1.Len_Flags >> 16;
+ if (((Base = pSendBd->HostAddr.Low) > 0xffffdcc0) &&
+ (pSendBd->HostAddr.High == 0) &&
+ ((Base + 8 + Len) < Base)) {
+ return LM_STATUS_SUCCESS;
+ }
+ FragCount++;
+ if (FragCount >= pPacket->u.Tx.FragCount) {
+ break;
+ }
+ pSendBd++;
+ if (!pDevice->NicSendBd) {
+ Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
+ if (Idx == 0) {
+ pSendBd = &pDevice->pSendBdVirt[0];
+ }
+ }
+ }
+ return LM_STATUS_FAILURE;
+}
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+__inline static unsigned long
+ComputeCrc32 (unsigned char *pBuffer, unsigned long BufferSize)
+{
+ unsigned long Reg;
+ unsigned long Tmp;
+ unsigned long j, k;
+
+ Reg = 0xffffffff;
+
+ for (j = 0; j < BufferSize; j++) {
+ Reg ^= pBuffer[j];
+
+ for (k = 0; k < 8; k++) {
+ Tmp = Reg & 0x01;
+
+ Reg >>= 1;
+
+ if (Tmp) {
+ Reg ^= 0xedb88320;
+ }
+ }
+ }
+
+ return ~Reg;
+} /* ComputeCrc32 */
+
+/******************************************************************************/
+/* Description: */
+/* This routine sets the receive control register according to ReceiveMask */
+/* */
+/* Return: */
+/* LM_STATUS_SUCCESS */
+/******************************************************************************/
+LM_STATUS LM_SetReceiveMask (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Mask)
+{
+ LM_UINT32 ReceiveMask;
+ LM_UINT32 RxMode;
+ LM_UINT32 j, k;
+
+ ReceiveMask = Mask;
+
+ RxMode = pDevice->RxMode;
+
+ if (Mask & LM_ACCEPT_UNICAST) {
+ Mask &= ~LM_ACCEPT_UNICAST;
+ }
+
+ if (Mask & LM_ACCEPT_MULTICAST) {
+ Mask &= ~LM_ACCEPT_MULTICAST;
+ }
+
+ if (Mask & LM_ACCEPT_ALL_MULTICAST) {
+ Mask &= ~LM_ACCEPT_ALL_MULTICAST;
+ }
+
+ if (Mask & LM_ACCEPT_BROADCAST) {
+ Mask &= ~LM_ACCEPT_BROADCAST;
+ }
+
+ RxMode &= ~RX_MODE_PROMISCUOUS_MODE;
+ if (Mask & LM_PROMISCUOUS_MODE) {
+ RxMode |= RX_MODE_PROMISCUOUS_MODE;
+ Mask &= ~LM_PROMISCUOUS_MODE;
+ }
+
+ RxMode &= ~(RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED);
+ if (Mask & LM_ACCEPT_ERROR_PACKET) {
+ RxMode |= RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED;
+ Mask &= ~LM_ACCEPT_ERROR_PACKET;
+ }
+
+ /* Make sure all the bits are valid before committing changes. */
+ if (Mask) {
+ return LM_STATUS_FAILURE;
+ }
+
+ /* Commit the new filter. */
+ pDevice->RxMode = RxMode;
+ REG_WR (pDevice, MacCtrl.RxMode, RxMode);
+
+ pDevice->ReceiveMask = ReceiveMask;
+
+ /* Set up the MC hash table. */
+ if (ReceiveMask & LM_ACCEPT_ALL_MULTICAST) {
+ for (k = 0; k < 4; k++) {
+ REG_WR (pDevice, MacCtrl.HashReg[k], 0xffffffff);
+ }
+ } else if (ReceiveMask & LM_ACCEPT_MULTICAST) {
+ LM_UINT32 HashReg[4];
+
+ HashReg[0] = 0;
+ HashReg[1] = 0;
+ HashReg[2] = 0;
+ HashReg[3] = 0;
+ for (j = 0; j < pDevice->McEntryCount; j++) {
+ LM_UINT32 RegIndex;
+ LM_UINT32 Bitpos;
+ LM_UINT32 Crc32;
+
+ Crc32 =
+ ComputeCrc32 (pDevice->McTable[j],
+ ETHERNET_ADDRESS_SIZE);
+
+ /* The most significant 7 bits of the CRC32 (no inversion), */
+ /* are used to index into one of the possible 128 bit positions. */
+ Bitpos = ~Crc32 & 0x7f;
+
+ /* Hash register index. */
+ RegIndex = (Bitpos & 0x60) >> 5;
+
+ /* Bit to turn on within a hash register. */
+ Bitpos &= 0x1f;
+
+ /* Enable the multicast bit. */
+ HashReg[RegIndex] |= (1 << Bitpos);
+ }
+
+ /* REV_AX has problem with multicast filtering where it uses both */
+ /* DA and SA to perform hashing. */
+ for (k = 0; k < 4; k++) {
+ REG_WR (pDevice, MacCtrl.HashReg[k], HashReg[k]);
+ }
+ } else {
+ /* Reject all multicast frames. */
+ for (j = 0; j < 4; j++) {
+ REG_WR (pDevice, MacCtrl.HashReg[j], 0);
+ }
+ }
+
+ /* By default, Tigon3 will accept broadcast frames. We need to setup */
+ if (ReceiveMask & LM_ACCEPT_BROADCAST) {
+ REG_WR (pDevice,
+ MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule,
+ REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK);
+ REG_WR (pDevice,
+ MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value,
+ REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK);
+ REG_WR (pDevice,
+ MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule,
+ REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK);
+ REG_WR (pDevice,
+ MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value,
+ REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK);
+ } else {
+ REG_WR (pDevice,
+ MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule,
+ REJECT_BROADCAST_RULE1_RULE);
+ REG_WR (pDevice,
+ MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value,
+ REJECT_BROADCAST_RULE1_VALUE);
+ REG_WR (pDevice,
+ MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule,
+ REJECT_BROADCAST_RULE2_RULE);
+ REG_WR (pDevice,
+ MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value,
+ REJECT_BROADCAST_RULE2_VALUE);
+ }
+
+ /* disable the rest of the rules. */
+ for (j = RCV_LAST_RULE_IDX; j < 16; j++) {
+ REG_WR (pDevice, MacCtrl.RcvRules[j].Rule, 0);
+ REG_WR (pDevice, MacCtrl.RcvRules[j].Value, 0);
+ }
+
+ return LM_STATUS_SUCCESS;
+} /* LM_SetReceiveMask */
+
+/******************************************************************************/
+/* Description: */
+/* Disable the interrupt and put the transmitter and receiver engines in */
+/* an idle state. Also aborts all pending send requests and receive */
+/* buffers. */
+/* */
+/* Return: */
+/* LM_STATUS_SUCCESS */
+/******************************************************************************/
+LM_STATUS LM_Abort (PLM_DEVICE_BLOCK pDevice)
+{
+ PLM_PACKET pPacket;
+ LM_UINT Idx;
+
+ LM_DisableInterrupt (pDevice);
+
+ /* Disable all the state machines. */
+ LM_CntrlBlock (pDevice, T3_BLOCK_MAC_RX_ENGINE, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_RX_BD_INITIATOR, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_RX_LIST_PLMT, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_RX_LIST_SELECTOR, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_RX_DATA_INITIATOR, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_RX_DATA_COMP, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_RX_BD_COMP, LM_DISABLE);
+
+ LM_CntrlBlock (pDevice, T3_BLOCK_SEND_BD_SELECTOR, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_SEND_BD_INITIATOR, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_SEND_DATA_INITIATOR, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_DMA_RD, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_SEND_DATA_COMP, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_DMA_COMP, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_SEND_BD_COMP, LM_DISABLE);
+
+ /* Clear TDE bit */
+ pDevice->MacMode &= ~MAC_MODE_ENABLE_TDE;
+ REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode);
+
+ LM_CntrlBlock (pDevice, T3_BLOCK_MAC_TX_ENGINE, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_HOST_COALESING, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_DMA_WR, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_MBUF_CLUSTER_FREE, LM_DISABLE);
+
+ /* Reset all FTQs */
+ REG_WR (pDevice, Ftq.Reset, 0xffffffff);
+ REG_WR (pDevice, Ftq.Reset, 0x0);
+
+ LM_CntrlBlock (pDevice, T3_BLOCK_MBUF_MANAGER, LM_DISABLE);
+ LM_CntrlBlock (pDevice, T3_BLOCK_MEM_ARBITOR, LM_DISABLE);
+
+ MM_ACQUIRE_INT_LOCK (pDevice);
+
+ /* Abort packets that have already queued to go out. */
+ pPacket = (PLM_PACKET) QQ_PopHead (&pDevice->TxPacketActiveQ.Container);
+ while (pPacket) {
+
+ pPacket->PacketStatus = LM_STATUS_TRANSMIT_ABORTED;
+ pDevice->TxCounters.TxPacketAbortedCnt++;
+
+ atomic_add (pPacket->u.Tx.FragCount, &pDevice->SendBdLeft);
+
+ QQ_PushTail (&pDevice->TxPacketXmittedQ.Container, pPacket);
+
+ pPacket = (PLM_PACKET)
+ QQ_PopHead (&pDevice->TxPacketActiveQ.Container);
+ }
+
+ /* Cleanup the receive return rings. */
+ LM_ServiceRxInterrupt (pDevice);
+
+ /* Don't want to indicate rx packets in Ndis miniport shutdown context. */
+ /* Doing so may cause system crash. */
+ if (!pDevice->ShuttingDown) {
+ /* Indicate packets to the protocol. */
+ MM_IndicateTxPackets (pDevice);
+
+ /* Indicate received packets to the protocols. */
+ MM_IndicateRxPackets (pDevice);
+ } else {
+ /* Move the receive packet descriptors in the ReceivedQ to the */
+ /* free queue. */
+ for (;;) {
+ pPacket =
+ (PLM_PACKET) QQ_PopHead (&pDevice->
+ RxPacketReceivedQ.
+ Container);
+ if (pPacket == NULL) {
+ break;
+ }
+ QQ_PushTail (&pDevice->RxPacketFreeQ.Container,
+ pPacket);
+ }
+ }
+
+ /* Clean up the Std Receive Producer ring. */
+ Idx = pDevice->pStatusBlkVirt->RcvStdConIdx;
+
+ while (Idx != pDevice->RxStdProdIdx) {
+ pPacket = (PLM_PACKET) (MM_UINT_PTR (pDevice->pPacketDescBase) +
+ MM_UINT_PTR (pDevice->pRxStdBdVirt[Idx].
+ Opaque));
+
+ QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
+
+ Idx = (Idx + 1) & T3_STD_RCV_RCB_ENTRY_COUNT_MASK;
+ } /* while */
+
+ /* Reinitialize our copy of the indices. */
+ pDevice->RxStdProdIdx = 0;
+
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ /* Clean up the Jumbo Receive Producer ring. */
+ Idx = pDevice->pStatusBlkVirt->RcvJumboConIdx;
+
+ while (Idx != pDevice->RxJumboProdIdx) {
+ pPacket = (PLM_PACKET) (MM_UINT_PTR (pDevice->pPacketDescBase) +
+ MM_UINT_PTR (pDevice->
+ pRxJumboBdVirt[Idx].
+ Opaque));
+
+ QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
+
+ Idx = (Idx + 1) & T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK;
+ } /* while */
+
+ /* Reinitialize our copy of the indices. */
+ pDevice->RxJumboProdIdx = 0;
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+
+ MM_RELEASE_INT_LOCK (pDevice);
+
+ /* Initialize the statistis Block */
+ pDevice->pStatusBlkVirt->Status = 0;
+ pDevice->pStatusBlkVirt->RcvStdConIdx = 0;
+ pDevice->pStatusBlkVirt->RcvJumboConIdx = 0;
+ pDevice->pStatusBlkVirt->RcvMiniConIdx = 0;
+
+ return LM_STATUS_SUCCESS;
+} /* LM_Abort */
+
+/******************************************************************************/
+/* Description: */
+/* Disable the interrupt and put the transmitter and receiver engines in */
+/* an idle state. Aborts all pending send requests and receive buffers. */
+/* Also free all the receive buffers. */
+/* */
+/* Return: */
+/* LM_STATUS_SUCCESS */
+/******************************************************************************/
+LM_STATUS LM_Halt (PLM_DEVICE_BLOCK pDevice)
+{
+ PLM_PACKET pPacket;
+ LM_UINT32 EntryCnt;
+
+ LM_Abort (pDevice);
+
+ /* Get the number of entries in the queue. */
+ EntryCnt = QQ_GetEntryCnt (&pDevice->RxPacketFreeQ.Container);
+
+ /* Make sure all the packets have been accounted for. */
+ for (EntryCnt = 0; EntryCnt < pDevice->RxPacketDescCnt; EntryCnt++) {
+ pPacket =
+ (PLM_PACKET) QQ_PopHead (&pDevice->RxPacketFreeQ.Container);
+ if (pPacket == 0)
+ break;
+
+ MM_FreeRxBuffer (pDevice, pPacket);
+
+ QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
+ }
+
+ LM_ResetChip (pDevice);
+
+ /* Restore PCI configuration registers. */
+ MM_WriteConfig32 (pDevice, PCI_CACHE_LINE_SIZE_REG,
+ pDevice->SavedCacheLineReg);
+ LM_RegWrInd (pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG,
+ (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId);
+
+ /* Reprogram the MAC address. */
+ LM_SetMacAddress (pDevice, pDevice->NodeAddress);
+
+ return LM_STATUS_SUCCESS;
+} /* LM_Halt */
+
+STATIC LM_STATUS LM_ResetChip (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_UINT32 Value32;
+ LM_UINT32 j;
+
+ /* Wait for access to the nvram interface before resetting. This is */
+ /* a workaround to prevent EEPROM corruption. */
+ if (T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
+ T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5701) {
+ /* Request access to the flash interface. */
+ REG_WR (pDevice, Nvram.SwArb, SW_ARB_REQ_SET1);
+
+ for (j = 0; j < 100000; j++) {
+ Value32 = REG_RD (pDevice, Nvram.SwArb);
+ if (Value32 & SW_ARB_GNT1) {
+ break;
+ }
+ MM_Wait (10);
+ }
+ }
+
+ /* Global reset. */
+ REG_WR (pDevice, Grc.MiscCfg, GRC_MISC_CFG_CORE_CLOCK_RESET);
+ MM_Wait (40);
+ MM_Wait (40);
+ MM_Wait (40);
+
+ /* make sure we re-enable indirect accesses */
+ MM_WriteConfig32 (pDevice, T3_PCI_MISC_HOST_CTRL_REG,
+ pDevice->MiscHostCtrl);
+
+ /* Set MAX PCI retry to zero. */
+ Value32 =
+ T3_PCI_STATE_PCI_ROM_ENABLE | T3_PCI_STATE_PCI_ROM_RETRY_ENABLE;
+ if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) {
+ if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) {
+ Value32 |= T3_PCI_STATE_RETRY_SAME_DMA;
+ }
+ }
+ MM_WriteConfig32 (pDevice, T3_PCI_STATE_REG, Value32);
+
+ /* Restore PCI command register. */
+ MM_WriteConfig32 (pDevice, PCI_COMMAND_REG,
+ pDevice->PciCommandStatusWords);
+
+ /* Disable PCI-X relaxed ordering bit. */
+ MM_ReadConfig32 (pDevice, PCIX_CAP_REG, &Value32);
+ Value32 &= ~PCIX_ENABLE_RELAXED_ORDERING;
+ MM_WriteConfig32 (pDevice, PCIX_CAP_REG, Value32);
+
+ /* Enable memory arbiter. */
+ REG_WR (pDevice, MemArbiter.Mode, T3_MEM_ARBITER_MODE_ENABLE);
+
+#ifdef BIG_ENDIAN_PCI /* This from jfd */
+ Value32 = GRC_MODE_WORD_SWAP_DATA | GRC_MODE_WORD_SWAP_NON_FRAME_DATA;
+#else
+#ifdef BIG_ENDIAN_HOST
+ /* Reconfigure the mode register. */
+ Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
+ GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
+ GRC_MODE_BYTE_SWAP_DATA | GRC_MODE_WORD_SWAP_DATA;
+#else
+ /* Reconfigure the mode register. */
+ Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | GRC_MODE_BYTE_SWAP_DATA;
+#endif
+#endif
+ REG_WR (pDevice, Grc.Mode, Value32);
+
+ /* Prevent PXE from restarting. */
+ MEM_WR_OFFSET (pDevice, 0x0b50, T3_MAGIC_NUM);
+
+ if (pDevice->EnableTbi) {
+ pDevice->MacMode = MAC_MODE_PORT_MODE_TBI;
+ REG_WR (pDevice, MacCtrl.Mode, MAC_MODE_PORT_MODE_TBI);
+ } else {
+ REG_WR (pDevice, MacCtrl.Mode, 0);
+ }
+
+ /* Wait for the firmware to finish initialization. */
+ for (j = 0; j < 100000; j++) {
+ MM_Wait (10);
+
+ Value32 = MEM_RD_OFFSET (pDevice, 0x0b50);
+ if (Value32 == ~T3_MAGIC_NUM) {
+ break;
+ }
+ }
+ return LM_STATUS_SUCCESS;
+}
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+__inline static void LM_ServiceTxInterrupt (PLM_DEVICE_BLOCK pDevice)
+{
+ PLM_PACKET pPacket;
+ LM_UINT32 HwConIdx;
+ LM_UINT32 SwConIdx;
+
+ HwConIdx = pDevice->pStatusBlkVirt->Idx[0].SendConIdx;
+
+ /* Get our copy of the consumer index. The buffer descriptors */
+ /* that are in between the consumer indices are freed. */
+ SwConIdx = pDevice->SendConIdx;
+
+ /* Move the packets from the TxPacketActiveQ that are sent out to */
+ /* the TxPacketXmittedQ. Packets that are sent use the */
+ /* descriptors that are between SwConIdx and HwConIdx. */
+ while (SwConIdx != HwConIdx) {
+ /* Get the packet that was sent from the TxPacketActiveQ. */
+ pPacket =
+ (PLM_PACKET) QQ_PopHead (&pDevice->TxPacketActiveQ.
+ Container);
+
+ /* Set the return status. */
+ pPacket->PacketStatus = LM_STATUS_SUCCESS;
+
+ /* Put the packet in the TxPacketXmittedQ for indication later. */
+ QQ_PushTail (&pDevice->TxPacketXmittedQ.Container, pPacket);
+
+ /* Move to the next packet's BD. */
+ SwConIdx = (SwConIdx + pPacket->u.Tx.FragCount) &
+ T3_SEND_RCB_ENTRY_COUNT_MASK;
+
+ /* Update the number of unused BDs. */
+ atomic_add (pPacket->u.Tx.FragCount, &pDevice->SendBdLeft);
+
+ /* Get the new updated HwConIdx. */
+ HwConIdx = pDevice->pStatusBlkVirt->Idx[0].SendConIdx;
+ } /* while */
+
+ /* Save the new SwConIdx. */
+ pDevice->SendConIdx = SwConIdx;
+
+} /* LM_ServiceTxInterrupt */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+__inline static void LM_ServiceRxInterrupt (PLM_DEVICE_BLOCK pDevice)
+{
+ PLM_PACKET pPacket;
+ PT3_RCV_BD pRcvBd;
+ LM_UINT32 HwRcvRetProdIdx;
+ LM_UINT32 SwRcvRetConIdx;
+
+ /* Loop thru the receive return rings for received packets. */
+ HwRcvRetProdIdx = pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx;
+
+ SwRcvRetConIdx = pDevice->RcvRetConIdx;
+ while (SwRcvRetConIdx != HwRcvRetProdIdx) {
+ pRcvBd = &pDevice->pRcvRetBdVirt[SwRcvRetConIdx];
+
+ /* Get the received packet descriptor. */
+ pPacket = (PLM_PACKET) (MM_UINT_PTR (pDevice->pPacketDescBase) +
+ MM_UINT_PTR (pRcvBd->Opaque));
+
+ /* Check the error flag. */
+ if (pRcvBd->ErrorFlag &&
+ pRcvBd->ErrorFlag != RCV_BD_ERR_ODD_NIBBLED_RCVD_MII) {
+ pPacket->PacketStatus = LM_STATUS_FAILURE;
+
+ pDevice->RxCounters.RxPacketErrCnt++;
+
+ if (pRcvBd->ErrorFlag & RCV_BD_ERR_BAD_CRC) {
+ pDevice->RxCounters.RxErrCrcCnt++;
+ }
+
+ if (pRcvBd->ErrorFlag & RCV_BD_ERR_COLL_DETECT) {
+ pDevice->RxCounters.RxErrCollCnt++;
+ }
+
+ if (pRcvBd->ErrorFlag & RCV_BD_ERR_LINK_LOST_DURING_PKT) {
+ pDevice->RxCounters.RxErrLinkLostCnt++;
+ }
+
+ if (pRcvBd->ErrorFlag & RCV_BD_ERR_PHY_DECODE_ERR) {
+ pDevice->RxCounters.RxErrPhyDecodeCnt++;
+ }
+
+ if (pRcvBd->ErrorFlag & RCV_BD_ERR_ODD_NIBBLED_RCVD_MII) {
+ pDevice->RxCounters.RxErrOddNibbleCnt++;
+ }
+
+ if (pRcvBd->ErrorFlag & RCV_BD_ERR_MAC_ABORT) {
+ pDevice->RxCounters.RxErrMacAbortCnt++;
+ }
+
+ if (pRcvBd->ErrorFlag & RCV_BD_ERR_LEN_LT_64) {
+ pDevice->RxCounters.RxErrShortPacketCnt++;
+ }
+
+ if (pRcvBd->ErrorFlag & RCV_BD_ERR_TRUNC_NO_RESOURCES) {
+ pDevice->RxCounters.RxErrNoResourceCnt++;
+ }
+
+ if (pRcvBd->ErrorFlag & RCV_BD_ERR_GIANT_FRAME_RCVD) {
+ pDevice->RxCounters.RxErrLargePacketCnt++;
+ }
+ } else {
+ pPacket->PacketStatus = LM_STATUS_SUCCESS;
+ pPacket->PacketSize = pRcvBd->Len - 4;
+
+ pPacket->Flags = pRcvBd->Flags;
+ if (pRcvBd->Flags & RCV_BD_FLAG_VLAN_TAG) {
+ pPacket->VlanTag = pRcvBd->VlanTag;
+ }
+
+ pPacket->u.Rx.TcpUdpChecksum = pRcvBd->TcpUdpCksum;
+ }
+
+ /* Put the packet descriptor containing the received packet */
+ /* buffer in the RxPacketReceivedQ for indication later. */
+ QQ_PushTail (&pDevice->RxPacketReceivedQ.Container, pPacket);
+
+ /* Go to the next buffer descriptor. */
+ SwRcvRetConIdx = (SwRcvRetConIdx + 1) &
+ T3_RCV_RETURN_RCB_ENTRY_COUNT_MASK;
+
+ /* Get the updated HwRcvRetProdIdx. */
+ HwRcvRetProdIdx = pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx;
+ } /* while */
+
+ pDevice->RcvRetConIdx = SwRcvRetConIdx;
+
+ /* Update the receive return ring consumer index. */
+ MB_REG_WR (pDevice, Mailbox.RcvRetConIdx[0].Low, SwRcvRetConIdx);
+} /* LM_ServiceRxInterrupt */
+
+/******************************************************************************/
+/* Description: */
+/* This is the interrupt event handler routine. It acknowledges all */
+/* pending interrupts and process all pending events. */
+/* */
+/* Return: */
+/* LM_STATUS_SUCCESS */
+/******************************************************************************/
+LM_STATUS LM_ServiceInterrupts (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_UINT32 Value32;
+ int ServicePhyInt = FALSE;
+
+ /* Setup the phy chip whenever the link status changes. */
+ if (pDevice->LinkChngMode == T3_LINK_CHNG_MODE_USE_STATUS_REG) {
+ Value32 = REG_RD (pDevice, MacCtrl.Status);
+ if (pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) {
+ if (Value32 & MAC_STATUS_MI_INTERRUPT) {
+ ServicePhyInt = TRUE;
+ }
+ } else if (Value32 & MAC_STATUS_LINK_STATE_CHANGED) {
+ ServicePhyInt = TRUE;
+ }
+ } else {
+ if (pDevice->pStatusBlkVirt->
+ Status & STATUS_BLOCK_LINK_CHANGED_STATUS) {
+ pDevice->pStatusBlkVirt->Status =
+ STATUS_BLOCK_UPDATED | (pDevice->pStatusBlkVirt->
+ Status &
+ ~STATUS_BLOCK_LINK_CHANGED_STATUS);
+ ServicePhyInt = TRUE;
+ }
+ }
+#if INCLUDE_TBI_SUPPORT
+ if (pDevice->IgnoreTbiLinkChange == TRUE) {
+ ServicePhyInt = FALSE;
+ }
+#endif
+ if (ServicePhyInt == TRUE) {
+ LM_SetupPhy (pDevice);
+ }
+
+ /* Service receive and transmit interrupts. */
+ LM_ServiceRxInterrupt (pDevice);
+ LM_ServiceTxInterrupt (pDevice);
+
+ /* No spinlock for this queue since this routine is serialized. */
+ if (!QQ_Empty (&pDevice->RxPacketReceivedQ.Container)) {
+ /* Indicate receive packets. */
+ MM_IndicateRxPackets (pDevice);
+ /* LM_QueueRxPackets(pDevice); */
+ }
+
+ /* No spinlock for this queue since this routine is serialized. */
+ if (!QQ_Empty (&pDevice->TxPacketXmittedQ.Container)) {
+ MM_IndicateTxPackets (pDevice);
+ }
+
+ return LM_STATUS_SUCCESS;
+} /* LM_ServiceInterrupts */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_STATUS LM_MulticastAdd (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress)
+{
+ PLM_UINT8 pEntry;
+ LM_UINT32 j;
+
+ pEntry = pDevice->McTable[0];
+ for (j = 0; j < pDevice->McEntryCount; j++) {
+ if (IS_ETH_ADDRESS_EQUAL (pEntry, pMcAddress)) {
+ /* Found a match, increment the instance count. */
+ pEntry[LM_MC_INSTANCE_COUNT_INDEX] += 1;
+
+ return LM_STATUS_SUCCESS;
+ }
+
+ pEntry += LM_MC_ENTRY_SIZE;
+ }
+
+ if (pDevice->McEntryCount >= LM_MAX_MC_TABLE_SIZE) {
+ return LM_STATUS_FAILURE;
+ }
+
+ pEntry = pDevice->McTable[pDevice->McEntryCount];
+
+ COPY_ETH_ADDRESS (pMcAddress, pEntry);
+ pEntry[LM_MC_INSTANCE_COUNT_INDEX] = 1;
+
+ pDevice->McEntryCount++;
+
+ LM_SetReceiveMask (pDevice, pDevice->ReceiveMask | LM_ACCEPT_MULTICAST);
+
+ return LM_STATUS_SUCCESS;
+} /* LM_MulticastAdd */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_STATUS LM_MulticastDel (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress)
+{
+ PLM_UINT8 pEntry;
+ LM_UINT32 j;
+
+ pEntry = pDevice->McTable[0];
+ for (j = 0; j < pDevice->McEntryCount; j++) {
+ if (IS_ETH_ADDRESS_EQUAL (pEntry, pMcAddress)) {
+ /* Found a match, decrement the instance count. */
+ pEntry[LM_MC_INSTANCE_COUNT_INDEX] -= 1;
+
+ /* No more instance left, remove the address from the table. */
+ /* Move the last entry in the table to the delete slot. */
+ if (pEntry[LM_MC_INSTANCE_COUNT_INDEX] == 0 &&
+ pDevice->McEntryCount > 1) {
+
+ COPY_ETH_ADDRESS (pDevice->
+ McTable[pDevice->
+ McEntryCount - 1],
+ pEntry);
+ pEntry[LM_MC_INSTANCE_COUNT_INDEX] =
+ pDevice->McTable[pDevice->McEntryCount - 1]
+ [LM_MC_INSTANCE_COUNT_INDEX];
+ }
+ pDevice->McEntryCount--;
+
+ /* Update the receive mask if the table is empty. */
+ if (pDevice->McEntryCount == 0) {
+ LM_SetReceiveMask (pDevice,
+ pDevice->
+ ReceiveMask &
+ ~LM_ACCEPT_MULTICAST);
+ }
+
+ return LM_STATUS_SUCCESS;
+ }
+
+ pEntry += LM_MC_ENTRY_SIZE;
+ }
+
+ return LM_STATUS_FAILURE;
+} /* LM_MulticastDel */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_STATUS LM_MulticastClear (PLM_DEVICE_BLOCK pDevice)
+{
+ pDevice->McEntryCount = 0;
+
+ LM_SetReceiveMask (pDevice,
+ pDevice->ReceiveMask & ~LM_ACCEPT_MULTICAST);
+
+ return LM_STATUS_SUCCESS;
+} /* LM_MulticastClear */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_STATUS LM_SetMacAddress (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMacAddress)
+{
+ LM_UINT32 j;
+
+ for (j = 0; j < 4; j++) {
+ REG_WR (pDevice, MacCtrl.MacAddr[j].High,
+ (pMacAddress[0] << 8) | pMacAddress[1]);
+ REG_WR (pDevice, MacCtrl.MacAddr[j].Low,
+ (pMacAddress[2] << 24) | (pMacAddress[3] << 16) |
+ (pMacAddress[4] << 8) | pMacAddress[5]);
+ }
+
+ return LM_STATUS_SUCCESS;
+}
+
+/******************************************************************************/
+/* Description: */
+/* Sets up the default line speed, and duplex modes based on the requested */
+/* media type. */
+/* */
+/* Return: */
+/* None. */
+/******************************************************************************/
+static LM_STATUS
+LM_TranslateRequestedMediaType (LM_REQUESTED_MEDIA_TYPE RequestedMediaType,
+ PLM_MEDIA_TYPE pMediaType,
+ PLM_LINE_SPEED pLineSpeed,
+ PLM_DUPLEX_MODE pDuplexMode)
+{
+ *pMediaType = LM_MEDIA_TYPE_AUTO;
+ *pLineSpeed = LM_LINE_SPEED_UNKNOWN;
+ *pDuplexMode = LM_DUPLEX_MODE_UNKNOWN;
+
+ /* determine media type */
+ switch (RequestedMediaType) {
+ case LM_REQUESTED_MEDIA_TYPE_BNC:
+ *pMediaType = LM_MEDIA_TYPE_BNC;
+ *pLineSpeed = LM_LINE_SPEED_10MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
+
+ case LM_REQUESTED_MEDIA_TYPE_UTP_AUTO:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ break;
+
+ case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ *pLineSpeed = LM_LINE_SPEED_10MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
+
+ case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ *pLineSpeed = LM_LINE_SPEED_10MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
+
+ case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ *pLineSpeed = LM_LINE_SPEED_100MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
+
+ case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ *pLineSpeed = LM_LINE_SPEED_100MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
+
+ case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ *pLineSpeed = LM_LINE_SPEED_1000MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
+
+ case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ *pLineSpeed = LM_LINE_SPEED_1000MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
+
+ case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS:
+ *pMediaType = LM_MEDIA_TYPE_FIBER;
+ *pLineSpeed = LM_LINE_SPEED_100MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
+
+ case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS_FULL_DUPLEX:
+ *pMediaType = LM_MEDIA_TYPE_FIBER;
+ *pLineSpeed = LM_LINE_SPEED_100MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
+
+ case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS:
+ *pMediaType = LM_MEDIA_TYPE_FIBER;
+ *pLineSpeed = LM_LINE_SPEED_1000MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
+
+ case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX:
+ *pMediaType = LM_MEDIA_TYPE_FIBER;
+ *pLineSpeed = LM_LINE_SPEED_1000MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
+
+ default:
+ break;
+ } /* switch */
+
+ return LM_STATUS_SUCCESS;
+} /* LM_TranslateRequestedMediaType */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/* LM_STATUS_LINK_ACTIVE */
+/* LM_STATUS_LINK_DOWN */
+/******************************************************************************/
+static LM_STATUS LM_InitBcm540xPhy (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_LINE_SPEED CurrentLineSpeed;
+ LM_DUPLEX_MODE CurrentDuplexMode;
+ LM_STATUS CurrentLinkStatus;
+ LM_UINT32 Value32;
+ LM_UINT32 j;
+
+#if 1 /* jmb: bugfix -- moved here, out of code that sets initial pwr state */
+ LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x2);
+#endif
+ if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID) {
+ LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
+
+ if (!pDevice->InitDone) {
+ Value32 = 0;
+ }
+
+ if (!(Value32 & PHY_STATUS_LINK_PASS)) {
+ LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x0c20);
+
+ LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012);
+ LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x1804);
+
+ LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013);
+ LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x1204);
+
+ LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
+ LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0132);
+
+ LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
+ LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0232);
+
+ LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f);
+ LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0a20);
+
+ LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
+ for (j = 0; j < 1000; j++) {
+ MM_Wait (10);
+
+ LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
+ if (Value32 & PHY_STATUS_LINK_PASS) {
+ MM_Wait (40);
+ break;
+ }
+ }
+
+ if ((pDevice->PhyId & PHY_ID_REV_MASK) ==
+ PHY_BCM5401_B0_REV) {
+ if (!(Value32 & PHY_STATUS_LINK_PASS)
+ && (pDevice->OldLineSpeed ==
+ LM_LINE_SPEED_1000MBPS)) {
+ LM_WritePhy (pDevice, PHY_CTRL_REG,
+ PHY_CTRL_PHY_RESET);
+ for (j = 0; j < 100; j++) {
+ MM_Wait (10);
+
+ LM_ReadPhy (pDevice,
+ PHY_CTRL_REG,
+ &Value32);
+ if (!
+ (Value32 &
+ PHY_CTRL_PHY_RESET)) {
+ MM_Wait (40);
+ break;
+ }
+ }
+
+ LM_WritePhy (pDevice, BCM5401_AUX_CTRL,
+ 0x0c20);
+
+ LM_WritePhy (pDevice,
+ BCM540X_DSP_ADDRESS_REG,
+ 0x0012);
+ LM_WritePhy (pDevice,
+ BCM540X_DSP_RW_PORT,
+ 0x1804);
+
+ LM_WritePhy (pDevice,
+ BCM540X_DSP_ADDRESS_REG,
+ 0x0013);
+ LM_WritePhy (pDevice,
+ BCM540X_DSP_RW_PORT,
+ 0x1204);
+
+ LM_WritePhy (pDevice,
+ BCM540X_DSP_ADDRESS_REG,
+ 0x8006);
+ LM_WritePhy (pDevice,
+ BCM540X_DSP_RW_PORT,
+ 0x0132);
+
+ LM_WritePhy (pDevice,
+ BCM540X_DSP_ADDRESS_REG,
+ 0x8006);
+ LM_WritePhy (pDevice,
+ BCM540X_DSP_RW_PORT,
+ 0x0232);
+
+ LM_WritePhy (pDevice,
+ BCM540X_DSP_ADDRESS_REG,
+ 0x201f);
+ LM_WritePhy (pDevice,
+ BCM540X_DSP_RW_PORT,
+ 0x0a20);
+ }
+ }
+ }
+ } else if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B0) {
+ /* Bug: 5701 A0, B0 TX CRC workaround. */
+ LM_WritePhy (pDevice, 0x15, 0x0a75);
+ LM_WritePhy (pDevice, 0x1c, 0x8c68);
+ LM_WritePhy (pDevice, 0x1c, 0x8d68);
+ LM_WritePhy (pDevice, 0x1c, 0x8c68);
+ }
+
+ /* Acknowledge interrupts. */
+ LM_ReadPhy (pDevice, BCM540X_INT_STATUS_REG, &Value32);
+ LM_ReadPhy (pDevice, BCM540X_INT_STATUS_REG, &Value32);
+
+ /* Configure the interrupt mask. */
+ if (pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) {
+ LM_WritePhy (pDevice, BCM540X_INT_MASK_REG,
+ ~BCM540X_INT_LINK_CHANGE);
+ }
+
+ /* Configure PHY led mode. */
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701 ||
+ (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700)) {
+ if (pDevice->LedMode == LED_MODE_THREE_LINK) {
+ LM_WritePhy (pDevice, BCM540X_EXT_CTRL_REG,
+ BCM540X_EXT_CTRL_LINK3_LED_MODE);
+ } else {
+ LM_WritePhy (pDevice, BCM540X_EXT_CTRL_REG, 0);
+ }
+ }
+
+ CurrentLinkStatus = LM_STATUS_LINK_DOWN;
+
+ /* Get current link and duplex mode. */
+ for (j = 0; j < 100; j++) {
+ LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
+
+ if (Value32 & PHY_STATUS_LINK_PASS) {
+ break;
+ }
+ MM_Wait (40);
+ }
+
+ if (Value32 & PHY_STATUS_LINK_PASS) {
+
+ /* Determine the current line and duplex settings. */
+ LM_ReadPhy (pDevice, BCM540X_AUX_STATUS_REG, &Value32);
+ for (j = 0; j < 2000; j++) {
+ MM_Wait (10);
+
+ LM_ReadPhy (pDevice, BCM540X_AUX_STATUS_REG, &Value32);
+ if (Value32) {
+ break;
+ }
+ }
+
+ switch (Value32 & BCM540X_AUX_SPEED_MASK) {
+ case BCM540X_AUX_10BASET_HD:
+ CurrentLineSpeed = LM_LINE_SPEED_10MBPS;
+ CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
+
+ case BCM540X_AUX_10BASET_FD:
+ CurrentLineSpeed = LM_LINE_SPEED_10MBPS;
+ CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
+
+ case BCM540X_AUX_100BASETX_HD:
+ CurrentLineSpeed = LM_LINE_SPEED_100MBPS;
+ CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
+
+ case BCM540X_AUX_100BASETX_FD:
+ CurrentLineSpeed = LM_LINE_SPEED_100MBPS;
+ CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
+
+ case BCM540X_AUX_100BASET_HD:
+ CurrentLineSpeed = LM_LINE_SPEED_1000MBPS;
+ CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
+
+ case BCM540X_AUX_100BASET_FD:
+ CurrentLineSpeed = LM_LINE_SPEED_1000MBPS;
+ CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
+
+ default:
+
+ CurrentLineSpeed = LM_LINE_SPEED_UNKNOWN;
+ CurrentDuplexMode = LM_DUPLEX_MODE_UNKNOWN;
+ break;
+ }
+
+ /* Make sure we are in auto-neg mode. */
+ for (j = 0; j < 200; j++) {
+ LM_ReadPhy (pDevice, PHY_CTRL_REG, &Value32);
+ if (Value32 && Value32 != 0x7fff) {
+ break;
+ }
+
+ if (Value32 == 0 && pDevice->RequestedMediaType ==
+ LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS) {
+ break;
+ }
+
+ MM_Wait (10);
+ }
+
+ /* Use the current line settings for "auto" mode. */
+ if (pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO
+ || pDevice->RequestedMediaType ==
+ LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) {
+ if (Value32 & PHY_CTRL_AUTO_NEG_ENABLE) {
+ CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
+
+ /* We may be exiting low power mode and the link is in */
+ /* 10mb. In this case, we need to restart autoneg. */
+ LM_ReadPhy (pDevice, BCM540X_1000BASET_CTRL_REG,
+ &Value32);
+ pDevice->advertising1000 = Value32;
+ /* 5702FE supports 10/100Mb only. */
+ if (T3_ASIC_REV (pDevice->ChipRevId) !=
+ T3_ASIC_REV_5703
+ || pDevice->BondId !=
+ GRC_MISC_BD_ID_5702FE) {
+ if (!
+ (Value32 &
+ (BCM540X_AN_AD_1000BASET_HALF |
+ BCM540X_AN_AD_1000BASET_FULL))) {
+ CurrentLinkStatus =
+ LM_STATUS_LINK_SETTING_MISMATCH;
+ }
+ }
+ } else {
+ CurrentLinkStatus =
+ LM_STATUS_LINK_SETTING_MISMATCH;
+ }
+ } else {
+ /* Force line settings. */
+ /* Use the current setting if it matches the user's requested */
+ /* setting. */
+ LM_ReadPhy (pDevice, PHY_CTRL_REG, &Value32);
+ if ((pDevice->LineSpeed == CurrentLineSpeed) &&
+ (pDevice->DuplexMode == CurrentDuplexMode)) {
+ if ((pDevice->DisableAutoNeg &&
+ !(Value32 & PHY_CTRL_AUTO_NEG_ENABLE)) ||
+ (!pDevice->DisableAutoNeg &&
+ (Value32 & PHY_CTRL_AUTO_NEG_ENABLE))) {
+ CurrentLinkStatus =
+ LM_STATUS_LINK_ACTIVE;
+ } else {
+ CurrentLinkStatus =
+ LM_STATUS_LINK_SETTING_MISMATCH;
+ }
+ } else {
+ CurrentLinkStatus =
+ LM_STATUS_LINK_SETTING_MISMATCH;
+ }
+ }
+
+ /* Save line settings. */
+ pDevice->LineSpeed = CurrentLineSpeed;
+ pDevice->DuplexMode = CurrentDuplexMode;
+ pDevice->MediaType = LM_MEDIA_TYPE_UTP;
+ }
+
+ return CurrentLinkStatus;
+} /* LM_InitBcm540xPhy */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_STATUS
+LM_SetFlowControl (PLM_DEVICE_BLOCK pDevice,
+ LM_UINT32 LocalPhyAd, LM_UINT32 RemotePhyAd)
+{
+ LM_FLOW_CONTROL FlowCap;
+
+ /* Resolve flow control. */
+ FlowCap = LM_FLOW_CONTROL_NONE;
+
+ /* See Table 28B-3 of 802.3ab-1999 spec. */
+ if (pDevice->FlowControlCap & LM_FLOW_CONTROL_AUTO_PAUSE) {
+ if (LocalPhyAd & PHY_AN_AD_PAUSE_CAPABLE) {
+ if (LocalPhyAd & PHY_AN_AD_ASYM_PAUSE) {
+ if (RemotePhyAd &
+ PHY_LINK_PARTNER_PAUSE_CAPABLE) {
+ FlowCap =
+ LM_FLOW_CONTROL_TRANSMIT_PAUSE |
+ LM_FLOW_CONTROL_RECEIVE_PAUSE;
+ } else if (RemotePhyAd &
+ PHY_LINK_PARTNER_ASYM_PAUSE) {
+ FlowCap = LM_FLOW_CONTROL_RECEIVE_PAUSE;
+ }
+ } else {
+ if (RemotePhyAd &
+ PHY_LINK_PARTNER_PAUSE_CAPABLE) {
+ FlowCap =
+ LM_FLOW_CONTROL_TRANSMIT_PAUSE |
+ LM_FLOW_CONTROL_RECEIVE_PAUSE;
+ }
+ }
+ } else if (LocalPhyAd & PHY_AN_AD_ASYM_PAUSE) {
+ if ((RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE) &&
+ (RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE)) {
+ FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE;
+ }
+ }
+ } else {
+ FlowCap = pDevice->FlowControlCap;
+ }
+
+ /* Enable/disable rx PAUSE. */
+ pDevice->RxMode &= ~RX_MODE_ENABLE_FLOW_CONTROL;
+ if (FlowCap & LM_FLOW_CONTROL_RECEIVE_PAUSE &&
+ (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE ||
+ pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE)) {
+ pDevice->FlowControl |= LM_FLOW_CONTROL_RECEIVE_PAUSE;
+ pDevice->RxMode |= RX_MODE_ENABLE_FLOW_CONTROL;
+
+ }
+ REG_WR (pDevice, MacCtrl.RxMode, pDevice->RxMode);
+
+ /* Enable/disable tx PAUSE. */
+ pDevice->TxMode &= ~TX_MODE_ENABLE_FLOW_CONTROL;
+ if (FlowCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE &&
+ (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE ||
+ pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)) {
+ pDevice->FlowControl |= LM_FLOW_CONTROL_TRANSMIT_PAUSE;
+ pDevice->TxMode |= TX_MODE_ENABLE_FLOW_CONTROL;
+
+ }
+ REG_WR (pDevice, MacCtrl.TxMode, pDevice->TxMode);
+
+ return LM_STATUS_SUCCESS;
+}
+
+#if INCLUDE_TBI_SUPPORT
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+STATIC LM_STATUS LM_InitBcm800xPhy (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_UINT32 Value32;
+ LM_UINT32 j;
+
+ Value32 = REG_RD (pDevice, MacCtrl.Status);
+
+ /* Reset the SERDES during init and when we have link. */
+ if (!pDevice->InitDone || Value32 & MAC_STATUS_PCS_SYNCED) {
+ /* Set PLL lock range. */
+ LM_WritePhy (pDevice, 0x16, 0x8007);
+
+ /* Software reset. */
+ LM_WritePhy (pDevice, 0x00, 0x8000);
+
+ /* Wait for reset to complete. */
+ for (j = 0; j < 500; j++) {
+ MM_Wait (10);
+ }
+
+ /* Config mode; seletct PMA/Ch 1 regs. */
+ LM_WritePhy (pDevice, 0x10, 0x8411);
+
+ /* Enable auto-lock and comdet, select txclk for tx. */
+ LM_WritePhy (pDevice, 0x11, 0x0a10);
+
+ LM_WritePhy (pDevice, 0x18, 0x00a0);
+ LM_WritePhy (pDevice, 0x16, 0x41ff);
+
+ /* Assert and deassert POR. */
+ LM_WritePhy (pDevice, 0x13, 0x0400);
+ MM_Wait (40);
+ LM_WritePhy (pDevice, 0x13, 0x0000);
+
+ LM_WritePhy (pDevice, 0x11, 0x0a50);
+ MM_Wait (40);
+ LM_WritePhy (pDevice, 0x11, 0x0a10);
+
+ /* Delay for signal to stabilize. */
+ for (j = 0; j < 15000; j++) {
+ MM_Wait (10);
+ }
+
+ /* Deselect the channel register so we can read the PHY id later. */
+ LM_WritePhy (pDevice, 0x10, 0x8011);
+ }
+
+ return LM_STATUS_SUCCESS;
+}
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+STATIC LM_STATUS LM_SetupFiberPhy (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_STATUS CurrentLinkStatus;
+ AUTONEG_STATUS AnStatus = 0;
+ LM_UINT32 Value32;
+ LM_UINT32 Cnt;
+ LM_UINT32 j, k;
+
+ pDevice->MacMode &= ~(MAC_MODE_HALF_DUPLEX | MAC_MODE_PORT_MODE_MASK);
+
+ /* Initialize the send_config register. */
+ REG_WR (pDevice, MacCtrl.TxAutoNeg, 0);
+
+ /* Enable TBI and full duplex mode. */
+ pDevice->MacMode |= MAC_MODE_PORT_MODE_TBI;
+ REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode);
+
+ /* Initialize the BCM8002 SERDES PHY. */
+ switch (pDevice->PhyId & PHY_ID_MASK) {
+ case PHY_BCM8002_PHY_ID:
+ LM_InitBcm800xPhy (pDevice);
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable link change interrupt. */
+ REG_WR (pDevice, MacCtrl.MacEvent,
+ MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN);
+
+ /* Default to link down. */
+ CurrentLinkStatus = LM_STATUS_LINK_DOWN;
+
+ /* Get the link status. */
+ Value32 = REG_RD (pDevice, MacCtrl.Status);
+ if (Value32 & MAC_STATUS_PCS_SYNCED) {
+ if ((pDevice->RequestedMediaType ==
+ LM_REQUESTED_MEDIA_TYPE_AUTO)
+ || (pDevice->DisableAutoNeg == FALSE)) {
+ /* auto-negotiation mode. */
+ /* Initialize the autoneg default capaiblities. */
+ AutonegInit (&pDevice->AnInfo);
+
+ /* Set the context pointer to point to the main device structure. */
+ pDevice->AnInfo.pContext = pDevice;
+
+ /* Setup flow control advertisement register. */
+ Value32 = GetPhyAdFlowCntrlSettings (pDevice);
+ if (Value32 & PHY_AN_AD_PAUSE_CAPABLE) {
+ pDevice->AnInfo.mr_adv_sym_pause = 1;
+ } else {
+ pDevice->AnInfo.mr_adv_sym_pause = 0;
+ }
+
+ if (Value32 & PHY_AN_AD_ASYM_PAUSE) {
+ pDevice->AnInfo.mr_adv_asym_pause = 1;
+ } else {
+ pDevice->AnInfo.mr_adv_asym_pause = 0;
+ }
+
+ /* Try to autoneg up to six times. */
+ if (pDevice->IgnoreTbiLinkChange) {
+ Cnt = 1;
+ } else {
+ Cnt = 6;
+ }
+ for (j = 0; j < Cnt; j++) {
+ REG_WR (pDevice, MacCtrl.TxAutoNeg, 0);
+
+ Value32 =
+ pDevice->MacMode & ~MAC_MODE_PORT_MODE_MASK;
+ REG_WR (pDevice, MacCtrl.Mode, Value32);
+ MM_Wait (20);
+
+ REG_WR (pDevice, MacCtrl.Mode,
+ pDevice->
+ MacMode | MAC_MODE_SEND_CONFIGS);
+
+ MM_Wait (20);
+
+ pDevice->AnInfo.State = AN_STATE_UNKNOWN;
+ pDevice->AnInfo.CurrentTime_us = 0;
+
+ REG_WR (pDevice, Grc.Timer, 0);
+ for (k = 0;
+ (pDevice->AnInfo.CurrentTime_us < 75000)
+ && (k < 75000); k++) {
+ AnStatus =
+ Autoneg8023z (&pDevice->AnInfo);
+
+ if ((AnStatus == AUTONEG_STATUS_DONE) ||
+ (AnStatus == AUTONEG_STATUS_FAILED))
+ {
+ break;
+ }
+
+ pDevice->AnInfo.CurrentTime_us =
+ REG_RD (pDevice, Grc.Timer);
+
+ }
+ if ((AnStatus == AUTONEG_STATUS_DONE) ||
+ (AnStatus == AUTONEG_STATUS_FAILED)) {
+ break;
+ }
+ if (j >= 1) {
+ if (!(REG_RD (pDevice, MacCtrl.Status) &
+ MAC_STATUS_PCS_SYNCED)) {
+ break;
+ }
+ }
+ }
+
+ /* Stop sending configs. */
+ MM_AnTxIdle (&pDevice->AnInfo);
+
+ /* Resolve flow control settings. */
+ if ((AnStatus == AUTONEG_STATUS_DONE) &&
+ pDevice->AnInfo.mr_an_complete
+ && pDevice->AnInfo.mr_link_ok
+ && pDevice->AnInfo.mr_lp_adv_full_duplex) {
+ LM_UINT32 RemotePhyAd;
+ LM_UINT32 LocalPhyAd;
+
+ LocalPhyAd = 0;
+ if (pDevice->AnInfo.mr_adv_sym_pause) {
+ LocalPhyAd |= PHY_AN_AD_PAUSE_CAPABLE;
+ }
+
+ if (pDevice->AnInfo.mr_adv_asym_pause) {
+ LocalPhyAd |= PHY_AN_AD_ASYM_PAUSE;
+ }
+
+ RemotePhyAd = 0;
+ if (pDevice->AnInfo.mr_lp_adv_sym_pause) {
+ RemotePhyAd |=
+ PHY_LINK_PARTNER_PAUSE_CAPABLE;
+ }
+
+ if (pDevice->AnInfo.mr_lp_adv_asym_pause) {
+ RemotePhyAd |=
+ PHY_LINK_PARTNER_ASYM_PAUSE;
+ }
+
+ LM_SetFlowControl (pDevice, LocalPhyAd,
+ RemotePhyAd);
+
+ CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
+ }
+ for (j = 0; j < 30; j++) {
+ MM_Wait (20);
+ REG_WR (pDevice, MacCtrl.Status,
+ MAC_STATUS_SYNC_CHANGED |
+ MAC_STATUS_CFG_CHANGED);
+ MM_Wait (20);
+ if ((REG_RD (pDevice, MacCtrl.Status) &
+ (MAC_STATUS_SYNC_CHANGED |
+ MAC_STATUS_CFG_CHANGED)) == 0)
+ break;
+ }
+ if (pDevice->PollTbiLink) {
+ Value32 = REG_RD (pDevice, MacCtrl.Status);
+ if (Value32 & MAC_STATUS_RECEIVING_CFG) {
+ pDevice->IgnoreTbiLinkChange = TRUE;
+ } else {
+ pDevice->IgnoreTbiLinkChange = FALSE;
+ }
+ }
+ Value32 = REG_RD (pDevice, MacCtrl.Status);
+ if (CurrentLinkStatus == LM_STATUS_LINK_DOWN &&
+ (Value32 & MAC_STATUS_PCS_SYNCED) &&
+ ((Value32 & MAC_STATUS_RECEIVING_CFG) == 0)) {
+ CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
+ }
+ } else {
+ /* We are forcing line speed. */
+ pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE;
+ LM_SetFlowControl (pDevice, 0, 0);
+
+ CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
+ REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode |
+ MAC_MODE_SEND_CONFIGS);
+ }
+ }
+ /* Set the link polarity bit. */
+ pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY;
+ REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode);
+
+ pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED |
+ (pDevice->pStatusBlkVirt->
+ Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS);
+
+ for (j = 0; j < 100; j++) {
+ REG_WR (pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
+ MAC_STATUS_CFG_CHANGED);
+ MM_Wait (5);
+ if ((REG_RD (pDevice, MacCtrl.Status) &
+ (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0)
+ break;
+ }
+
+ Value32 = REG_RD (pDevice, MacCtrl.Status);
+ if ((Value32 & MAC_STATUS_PCS_SYNCED) == 0) {
+ CurrentLinkStatus = LM_STATUS_LINK_DOWN;
+ if (pDevice->DisableAutoNeg == FALSE) {
+ REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode |
+ MAC_MODE_SEND_CONFIGS);
+ MM_Wait (1);
+ REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode);
+ }
+ }
+
+ /* Initialize the current link status. */
+ if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) {
+ pDevice->LineSpeed = LM_LINE_SPEED_1000MBPS;
+ pDevice->DuplexMode = LM_DUPLEX_MODE_FULL;
+ REG_WR (pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED |
+ LED_CTRL_1000MBPS_LED_ON);
+ } else {
+ pDevice->LineSpeed = LM_LINE_SPEED_UNKNOWN;
+ pDevice->DuplexMode = LM_DUPLEX_MODE_UNKNOWN;
+ REG_WR (pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED |
+ LED_CTRL_OVERRIDE_TRAFFIC_LED);
+ }
+
+ /* Indicate link status. */
+ if (pDevice->LinkStatus != CurrentLinkStatus) {
+ pDevice->LinkStatus = CurrentLinkStatus;
+ MM_IndicateStatus (pDevice, CurrentLinkStatus);
+ }
+
+ return LM_STATUS_SUCCESS;
+}
+#endif /* INCLUDE_TBI_SUPPORT */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_STATUS LM_SetupCopperPhy (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_STATUS CurrentLinkStatus;
+ LM_UINT32 Value32;
+
+ /* Assume there is not link first. */
+ CurrentLinkStatus = LM_STATUS_LINK_DOWN;
+
+ /* Disable phy link change attention. */
+ REG_WR (pDevice, MacCtrl.MacEvent, 0);
+
+ /* Clear link change attention. */
+ REG_WR (pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
+ MAC_STATUS_CFG_CHANGED);
+
+ /* Disable auto-polling for the moment. */
+ pDevice->MiMode = 0xc0000;
+ REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode);
+ MM_Wait (40);
+
+ /* Determine the requested line speed and duplex. */
+ pDevice->OldLineSpeed = pDevice->LineSpeed;
+ LM_TranslateRequestedMediaType (pDevice->RequestedMediaType,
+ &pDevice->MediaType,
+ &pDevice->LineSpeed,
+ &pDevice->DuplexMode);
+
+ /* Initialize the phy chip. */
+ switch (pDevice->PhyId & PHY_ID_MASK) {
+ case PHY_BCM5400_PHY_ID:
+ case PHY_BCM5401_PHY_ID:
+ case PHY_BCM5411_PHY_ID:
+ case PHY_BCM5701_PHY_ID:
+ case PHY_BCM5703_PHY_ID:
+ case PHY_BCM5704_PHY_ID:
+ CurrentLinkStatus = LM_InitBcm540xPhy (pDevice);
+ break;
+
+ default:
+ break;
+ }
+
+ if (CurrentLinkStatus == LM_STATUS_LINK_SETTING_MISMATCH) {
+ CurrentLinkStatus = LM_STATUS_LINK_DOWN;
+ }
+
+ /* Setup flow control. */
+ pDevice->FlowControl = LM_FLOW_CONTROL_NONE;
+ if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) {
+ LM_FLOW_CONTROL FlowCap; /* Flow control capability. */
+
+ FlowCap = LM_FLOW_CONTROL_NONE;
+
+ if (pDevice->DuplexMode == LM_DUPLEX_MODE_FULL) {
+ if (pDevice->DisableAutoNeg == FALSE ||
+ pDevice->RequestedMediaType ==
+ LM_REQUESTED_MEDIA_TYPE_AUTO
+ || pDevice->RequestedMediaType ==
+ LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) {
+ LM_UINT32 ExpectedPhyAd;
+ LM_UINT32 LocalPhyAd;
+ LM_UINT32 RemotePhyAd;
+
+ LM_ReadPhy (pDevice, PHY_AN_AD_REG,
+ &LocalPhyAd);
+ pDevice->advertising = LocalPhyAd;
+ LocalPhyAd &=
+ (PHY_AN_AD_ASYM_PAUSE |
+ PHY_AN_AD_PAUSE_CAPABLE);
+
+ ExpectedPhyAd =
+ GetPhyAdFlowCntrlSettings (pDevice);
+
+ if (LocalPhyAd != ExpectedPhyAd) {
+ CurrentLinkStatus = LM_STATUS_LINK_DOWN;
+ } else {
+ LM_ReadPhy (pDevice,
+ PHY_LINK_PARTNER_ABILITY_REG,
+ &RemotePhyAd);
+
+ LM_SetFlowControl (pDevice, LocalPhyAd,
+ RemotePhyAd);
+ }
+ } else {
+ pDevice->FlowControlCap &=
+ ~LM_FLOW_CONTROL_AUTO_PAUSE;
+ LM_SetFlowControl (pDevice, 0, 0);
+ }
+ }
+ }
+
+ if (CurrentLinkStatus == LM_STATUS_LINK_DOWN) {
+ LM_ForceAutoNeg (pDevice, pDevice->RequestedMediaType);
+
+ /* If we force line speed, we make get link right away. */
+ LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
+ if (Value32 & PHY_STATUS_LINK_PASS) {
+ CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
+ }
+ }
+
+ /* GMII interface. */
+ pDevice->MacMode &= ~MAC_MODE_PORT_MODE_MASK;
+ if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) {
+ if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS ||
+ pDevice->LineSpeed == LM_LINE_SPEED_10MBPS) {
+ pDevice->MacMode |= MAC_MODE_PORT_MODE_MII;
+ } else {
+ pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
+ }
+ } else {
+ pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
+ }
+
+ /* Set the MAC to operate in the appropriate duplex mode. */
+ pDevice->MacMode &= ~MAC_MODE_HALF_DUPLEX;
+ if (pDevice->DuplexMode == LM_DUPLEX_MODE_HALF) {
+ pDevice->MacMode |= MAC_MODE_HALF_DUPLEX;
+ }
+
+ /* Set the link polarity bit. */
+ pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY;
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
+ if ((pDevice->LedMode == LED_MODE_LINK10) ||
+ (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE &&
+ pDevice->LineSpeed == LM_LINE_SPEED_10MBPS)) {
+ pDevice->MacMode |= MAC_MODE_LINK_POLARITY;
+ }
+ } else {
+ if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) {
+ pDevice->MacMode |= MAC_MODE_LINK_POLARITY;
+ }
+
+ /* Set LED mode. */
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ Value32 = LED_CTRL_PHY_MODE_1;
+ } else {
+ if (pDevice->LedMode == LED_MODE_OUTPUT) {
+ Value32 = LED_CTRL_PHY_MODE_2;
+ } else {
+ Value32 = LED_CTRL_PHY_MODE_1;
+ }
+ }
+ REG_WR (pDevice, MacCtrl.LedCtrl, Value32);
+ }
+
+ REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode);
+
+ /* Enable auto polling. */
+ if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) {
+ pDevice->MiMode |= MI_MODE_AUTO_POLLING_ENABLE;
+ REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode);
+ }
+
+ /* Enable phy link change attention. */
+ if (pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) {
+ REG_WR (pDevice, MacCtrl.MacEvent,
+ MAC_EVENT_ENABLE_MI_INTERRUPT);
+ } else {
+ REG_WR (pDevice, MacCtrl.MacEvent,
+ MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN);
+ }
+ if ((T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) &&
+ (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) &&
+ (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) &&
+ (((pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) &&
+ (pDevice->PciState & T3_PCI_STATE_BUS_SPEED_HIGH)) ||
+ !(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))) {
+ MM_Wait (120);
+ REG_WR (pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
+ MAC_STATUS_CFG_CHANGED);
+ MEM_WR_OFFSET (pDevice, T3_FIRMWARE_MAILBOX,
+ T3_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE);
+ }
+
+ /* Indicate link status. */
+ if (pDevice->LinkStatus != CurrentLinkStatus) {
+ pDevice->LinkStatus = CurrentLinkStatus;
+ MM_IndicateStatus (pDevice, CurrentLinkStatus);
+ }
+
+ return LM_STATUS_SUCCESS;
+} /* LM_SetupCopperPhy */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_STATUS LM_SetupPhy (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_STATUS LmStatus;
+ LM_UINT32 Value32;
+
+#if INCLUDE_TBI_SUPPORT
+ if (pDevice->EnableTbi) {
+ LmStatus = LM_SetupFiberPhy (pDevice);
+ } else
+#endif /* INCLUDE_TBI_SUPPORT */
+ {
+ LmStatus = LM_SetupCopperPhy (pDevice);
+ }
+ if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) {
+ if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) {
+ Value32 = REG_RD (pDevice, PciCfg.PciState);
+ REG_WR (pDevice, PciCfg.PciState,
+ Value32 | T3_PCI_STATE_RETRY_SAME_DMA);
+ }
+ }
+ if ((pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) &&
+ (pDevice->DuplexMode == LM_DUPLEX_MODE_HALF)) {
+ REG_WR (pDevice, MacCtrl.TxLengths, 0x26ff);
+ } else {
+ REG_WR (pDevice, MacCtrl.TxLengths, 0x2620);
+ }
+
+ return LmStatus;
+}
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_VOID
+LM_ReadPhy (PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg, PLM_UINT32 pData32)
+{
+ LM_UINT32 Value32;
+ LM_UINT32 j;
+
+ if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) {
+ REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode &
+ ~MI_MODE_AUTO_POLLING_ENABLE);
+ MM_Wait (40);
+ }
+
+ Value32 = (pDevice->PhyAddr << MI_COM_FIRST_PHY_ADDR_BIT) |
+ ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) <<
+ MI_COM_FIRST_PHY_REG_ADDR_BIT) | MI_COM_CMD_READ | MI_COM_START;
+
+ REG_WR (pDevice, MacCtrl.MiCom, Value32);
+
+ for (j = 0; j < 20; j++) {
+ MM_Wait (25);
+
+ Value32 = REG_RD (pDevice, MacCtrl.MiCom);
+
+ if (!(Value32 & MI_COM_BUSY)) {
+ MM_Wait (5);
+ Value32 = REG_RD (pDevice, MacCtrl.MiCom);
+ Value32 &= MI_COM_PHY_DATA_MASK;
+ break;
+ }
+ }
+
+ if (Value32 & MI_COM_BUSY) {
+ Value32 = 0;
+ }
+
+ *pData32 = Value32;
+
+ if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) {
+ REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode);
+ MM_Wait (40);
+ }
+} /* LM_ReadPhy */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_VOID
+LM_WritePhy (PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg, LM_UINT32 Data32)
+{
+ LM_UINT32 Value32;
+ LM_UINT32 j;
+
+ if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) {
+ REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode &
+ ~MI_MODE_AUTO_POLLING_ENABLE);
+ MM_Wait (40);
+ }
+
+ Value32 = (pDevice->PhyAddr << MI_COM_FIRST_PHY_ADDR_BIT) |
+ ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) <<
+ MI_COM_FIRST_PHY_REG_ADDR_BIT) | (Data32 & MI_COM_PHY_DATA_MASK) |
+ MI_COM_CMD_WRITE | MI_COM_START;
+
+ REG_WR (pDevice, MacCtrl.MiCom, Value32);
+
+ for (j = 0; j < 20; j++) {
+ MM_Wait (25);
+
+ Value32 = REG_RD (pDevice, MacCtrl.MiCom);
+
+ if (!(Value32 & MI_COM_BUSY)) {
+ MM_Wait (5);
+ break;
+ }
+ }
+
+ if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) {
+ REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode);
+ MM_Wait (40);
+ }
+} /* LM_WritePhy */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_STATUS LM_SetPowerState (PLM_DEVICE_BLOCK pDevice, LM_POWER_STATE PowerLevel)
+{
+ LM_UINT32 PmeSupport;
+ LM_UINT32 Value32;
+ LM_UINT32 PmCtrl;
+
+ /* make sureindirect accesses are enabled */
+ MM_WriteConfig32 (pDevice, T3_PCI_MISC_HOST_CTRL_REG,
+ pDevice->MiscHostCtrl);
+
+ /* Clear the PME_ASSERT bit and the power state bits. Also enable */
+ /* the PME bit. */
+ MM_ReadConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, &PmCtrl);
+
+ PmCtrl |= T3_PM_PME_ASSERTED;
+ PmCtrl &= ~T3_PM_POWER_STATE_MASK;
+
+ /* Set the appropriate power state. */
+ if (PowerLevel == LM_POWER_STATE_D0) {
+
+ /* Bring the card out of low power mode. */
+ PmCtrl |= T3_PM_POWER_STATE_D0;
+ MM_WriteConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, PmCtrl);
+
+ REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl);
+ MM_Wait (40);
+#if 0 /* Bugfix by jmb...can't call WritePhy here because pDevice not fully initialized */
+ LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x02);
+#endif
+
+ return LM_STATUS_SUCCESS;
+ } else if (PowerLevel == LM_POWER_STATE_D1) {
+ PmCtrl |= T3_PM_POWER_STATE_D1;
+ } else if (PowerLevel == LM_POWER_STATE_D2) {
+ PmCtrl |= T3_PM_POWER_STATE_D2;
+ } else if (PowerLevel == LM_POWER_STATE_D3) {
+ PmCtrl |= T3_PM_POWER_STATE_D3;
+ } else {
+ return LM_STATUS_FAILURE;
+ }
+ PmCtrl |= T3_PM_PME_ENABLE;
+
+ /* Mask out all interrupts so LM_SetupPhy won't be called while we are */
+ /* setting new line speed. */
+ Value32 = REG_RD (pDevice, PciCfg.MiscHostCtrl);
+ REG_WR (pDevice, PciCfg.MiscHostCtrl,
+ Value32 | MISC_HOST_CTRL_MASK_PCI_INT);
+
+ if (!pDevice->RestoreOnWakeUp) {
+ pDevice->RestoreOnWakeUp = TRUE;
+ pDevice->WakeUpDisableAutoNeg = pDevice->DisableAutoNeg;
+ pDevice->WakeUpRequestedMediaType = pDevice->RequestedMediaType;
+ }
+
+ /* Force auto-negotiation to 10 line speed. */
+ pDevice->DisableAutoNeg = FALSE;
+ pDevice->RequestedMediaType = LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS;
+ LM_SetupPhy (pDevice);
+
+ /* Put the driver in the initial state, and go through the power down */
+ /* sequence. */
+ LM_Halt (pDevice);
+
+ MM_ReadConfig32 (pDevice, T3_PCI_PM_CAP_REG, &PmeSupport);
+
+ if (pDevice->WakeUpModeCap != LM_WAKE_UP_MODE_NONE) {
+
+ /* Enable WOL. */
+ LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x5a);
+ MM_Wait (40);
+
+ /* Set LED mode. */
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ Value32 = LED_CTRL_PHY_MODE_1;
+ } else {
+ if (pDevice->LedMode == LED_MODE_OUTPUT) {
+ Value32 = LED_CTRL_PHY_MODE_2;
+ } else {
+ Value32 = LED_CTRL_PHY_MODE_1;
+ }
+ }
+
+ Value32 = MAC_MODE_PORT_MODE_MII;
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
+ if (pDevice->LedMode == LED_MODE_LINK10 ||
+ pDevice->WolSpeed == WOL_SPEED_10MB) {
+ Value32 |= MAC_MODE_LINK_POLARITY;
+ }
+ } else {
+ Value32 |= MAC_MODE_LINK_POLARITY;
+ }
+ REG_WR (pDevice, MacCtrl.Mode, Value32);
+ MM_Wait (40);
+ MM_Wait (40);
+ MM_Wait (40);
+
+ /* Always enable magic packet wake-up if we have vaux. */
+ if ((PmeSupport & T3_PCI_PM_CAP_PME_D3COLD) &&
+ (pDevice->WakeUpModeCap & LM_WAKE_UP_MODE_MAGIC_PACKET)) {
+ Value32 |= MAC_MODE_DETECT_MAGIC_PACKET_ENABLE;
+ }
+
+ REG_WR (pDevice, MacCtrl.Mode, Value32);
+
+ /* Enable the receiver. */
+ REG_WR (pDevice, MacCtrl.RxMode, RX_MODE_ENABLE);
+ }
+
+ /* Disable tx/rx clocks, and seletect an alternate clock. */
+ if (pDevice->WolSpeed == WOL_SPEED_100MB) {
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ Value32 =
+ T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
+ T3_PCI_SELECT_ALTERNATE_CLOCK;
+ } else {
+ Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK;
+ }
+ REG_WR (pDevice, PciCfg.ClockCtrl, Value32);
+
+ MM_Wait (40);
+
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ Value32 =
+ T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
+ T3_PCI_SELECT_ALTERNATE_CLOCK |
+ T3_PCI_44MHZ_CORE_CLOCK;
+ } else {
+ Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK |
+ T3_PCI_44MHZ_CORE_CLOCK;
+ }
+
+ REG_WR (pDevice, PciCfg.ClockCtrl, Value32);
+
+ MM_Wait (40);
+
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ Value32 =
+ T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
+ T3_PCI_44MHZ_CORE_CLOCK;
+ } else {
+ Value32 = T3_PCI_44MHZ_CORE_CLOCK;
+ }
+
+ REG_WR (pDevice, PciCfg.ClockCtrl, Value32);
+ } else {
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ Value32 =
+ T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
+ T3_PCI_SELECT_ALTERNATE_CLOCK |
+ T3_PCI_POWER_DOWN_PCI_PLL133;
+ } else {
+ Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK |
+ T3_PCI_POWER_DOWN_PCI_PLL133;
+ }
+
+ REG_WR (pDevice, PciCfg.ClockCtrl, Value32);
+ }
+
+ MM_Wait (40);
+
+ if (!pDevice->EepromWp
+ && (pDevice->WakeUpModeCap != LM_WAKE_UP_MODE_NONE)) {
+ /* Switch adapter to auxilliary power. */
+ if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */
+ REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
+ MM_Wait (40);
+ } else {
+ /* GPIO0 = 0, GPIO1 = 1, GPIO2 = 1. */
+ REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
+ MM_Wait (40);
+
+ /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 1. */
+ REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
+ MM_Wait (40);
+
+ /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */
+ REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
+ MM_Wait (40);
+ }
+ }
+
+ /* Set the phy to low power mode. */
+ /* Put the the hardware in low power mode. */
+ MM_WriteConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, PmCtrl);
+
+ return LM_STATUS_SUCCESS;
+} /* LM_SetPowerState */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+static LM_UINT32 GetPhyAdFlowCntrlSettings (PLM_DEVICE_BLOCK pDevice)
+{
+ LM_UINT32 Value32;
+
+ Value32 = 0;
+
+ /* Auto negotiation flow control only when autonegotiation is enabled. */
+ if (pDevice->DisableAutoNeg == FALSE ||
+ pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO ||
+ pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) {
+ /* Please refer to Table 28B-3 of the 802.3ab-1999 spec. */
+ if ((pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE) ||
+ ((pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE)
+ && (pDevice->
+ FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE))) {
+ Value32 |= PHY_AN_AD_PAUSE_CAPABLE;
+ } else if (pDevice->
+ FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE) {
+ Value32 |= PHY_AN_AD_ASYM_PAUSE;
+ } else if (pDevice->
+ FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE) {
+ Value32 |=
+ PHY_AN_AD_PAUSE_CAPABLE | PHY_AN_AD_ASYM_PAUSE;
+ }
+ }
+
+ return Value32;
+}
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/* LM_STATUS_FAILURE */
+/* LM_STATUS_SUCCESS */
+/* */
+/******************************************************************************/
+static LM_STATUS
+LM_ForceAutoNegBcm540xPhy (PLM_DEVICE_BLOCK pDevice,
+ LM_REQUESTED_MEDIA_TYPE RequestedMediaType)
+{
+ LM_MEDIA_TYPE MediaType;
+ LM_LINE_SPEED LineSpeed;
+ LM_DUPLEX_MODE DuplexMode;
+ LM_UINT32 NewPhyCtrl;
+ LM_UINT32 Value32;
+ LM_UINT32 Cnt;
+
+ /* Get the interface type, line speed, and duplex mode. */
+ LM_TranslateRequestedMediaType (RequestedMediaType, &MediaType,
+ &LineSpeed, &DuplexMode);
+
+ if (pDevice->RestoreOnWakeUp) {
+ LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, 0);
+ pDevice->advertising1000 = 0;
+ Value32 = PHY_AN_AD_10BASET_FULL | PHY_AN_AD_10BASET_HALF;
+ if (pDevice->WolSpeed == WOL_SPEED_100MB) {
+ Value32 |=
+ PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF;
+ }
+ Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
+ Value32 |= GetPhyAdFlowCntrlSettings (pDevice);
+ LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32);
+ pDevice->advertising = Value32;
+ }
+ /* Setup the auto-negotiation advertisement register. */
+ else if (LineSpeed == LM_LINE_SPEED_UNKNOWN) {
+ /* Setup the 10/100 Mbps auto-negotiation advertisement register. */
+ Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD |
+ PHY_AN_AD_10BASET_HALF | PHY_AN_AD_10BASET_FULL |
+ PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF;
+ Value32 |= GetPhyAdFlowCntrlSettings (pDevice);
+
+ LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32);
+ pDevice->advertising = Value32;
+
+ /* Advertise 1000Mbps */
+ Value32 =
+ BCM540X_AN_AD_1000BASET_HALF | BCM540X_AN_AD_1000BASET_FULL;
+
+#if INCLUDE_5701_AX_FIX
+ /* Bug: workaround for CRC error in gigabit mode when we are in */
+ /* slave mode. This will force the PHY to operate in */
+ /* master mode. */
+ if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B0) {
+ Value32 |= BCM540X_CONFIG_AS_MASTER |
+ BCM540X_ENABLE_CONFIG_AS_MASTER;
+ }
+#endif
+
+ LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, Value32);
+ pDevice->advertising1000 = Value32;
+ } else {
+ if (LineSpeed == LM_LINE_SPEED_1000MBPS) {
+ Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
+ Value32 |= GetPhyAdFlowCntrlSettings (pDevice);
+
+ LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32);
+ pDevice->advertising = Value32;
+
+ if (DuplexMode != LM_DUPLEX_MODE_FULL) {
+ Value32 = BCM540X_AN_AD_1000BASET_HALF;
+ } else {
+ Value32 = BCM540X_AN_AD_1000BASET_FULL;
+ }
+
+ LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG,
+ Value32);
+ pDevice->advertising1000 = Value32;
+ } else if (LineSpeed == LM_LINE_SPEED_100MBPS) {
+ LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, 0);
+ pDevice->advertising1000 = 0;
+
+ if (DuplexMode != LM_DUPLEX_MODE_FULL) {
+ Value32 = PHY_AN_AD_100BASETX_HALF;
+ } else {
+ Value32 = PHY_AN_AD_100BASETX_FULL;
+ }
+
+ Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
+ Value32 |= GetPhyAdFlowCntrlSettings (pDevice);
+
+ LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32);
+ pDevice->advertising = Value32;
+ } else if (LineSpeed == LM_LINE_SPEED_10MBPS) {
+ LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, 0);
+ pDevice->advertising1000 = 0;
+
+ if (DuplexMode != LM_DUPLEX_MODE_FULL) {
+ Value32 = PHY_AN_AD_10BASET_HALF;
+ } else {
+ Value32 = PHY_AN_AD_10BASET_FULL;
+ }
+
+ Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
+ Value32 |= GetPhyAdFlowCntrlSettings (pDevice);
+
+ LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32);
+ pDevice->advertising = Value32;
+ }
+ }
+
+ /* Force line speed if auto-negotiation is disabled. */
+ if (pDevice->DisableAutoNeg && LineSpeed != LM_LINE_SPEED_UNKNOWN) {
+ /* This code path is executed only when there is link. */
+ pDevice->MediaType = MediaType;
+ pDevice->LineSpeed = LineSpeed;
+ pDevice->DuplexMode = DuplexMode;
+
+ /* Force line seepd. */
+ NewPhyCtrl = 0;
+ switch (LineSpeed) {
+ case LM_LINE_SPEED_10MBPS:
+ NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_10MBPS;
+ break;
+ case LM_LINE_SPEED_100MBPS:
+ NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_100MBPS;
+ break;
+ case LM_LINE_SPEED_1000MBPS:
+ NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS;
+ break;
+ default:
+ NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS;
+ break;
+ }
+
+ if (DuplexMode == LM_DUPLEX_MODE_FULL) {
+ NewPhyCtrl |= PHY_CTRL_FULL_DUPLEX_MODE;
+ }
+
+ /* Don't do anything if the PHY_CTRL is already what we wanted. */
+ LM_ReadPhy (pDevice, PHY_CTRL_REG, &Value32);
+ if (Value32 != NewPhyCtrl) {
+ /* Temporary bring the link down before forcing line speed. */
+ LM_WritePhy (pDevice, PHY_CTRL_REG,
+ PHY_CTRL_LOOPBACK_MODE);
+
+ /* Wait for link to go down. */
+ for (Cnt = 0; Cnt < 15000; Cnt++) {
+ MM_Wait (10);
+
+ LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
+
+ if (!(Value32 & PHY_STATUS_LINK_PASS)) {
+ MM_Wait (40);
+ break;
+ }
+ }
+
+ LM_WritePhy (pDevice, PHY_CTRL_REG, NewPhyCtrl);
+ MM_Wait (40);
+ }
+ } else {
+ LM_WritePhy (pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE |
+ PHY_CTRL_RESTART_AUTO_NEG);
+ }
+
+ return LM_STATUS_SUCCESS;
+} /* LM_ForceAutoNegBcm540xPhy */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+static LM_STATUS
+LM_ForceAutoNeg (PLM_DEVICE_BLOCK pDevice,
+ LM_REQUESTED_MEDIA_TYPE RequestedMediaType)
+{
+ LM_STATUS LmStatus;
+
+ /* Initialize the phy chip. */
+ switch (pDevice->PhyId & PHY_ID_MASK) {
+ case PHY_BCM5400_PHY_ID:
+ case PHY_BCM5401_PHY_ID:
+ case PHY_BCM5411_PHY_ID:
+ case PHY_BCM5701_PHY_ID:
+ case PHY_BCM5703_PHY_ID:
+ case PHY_BCM5704_PHY_ID:
+ LmStatus =
+ LM_ForceAutoNegBcm540xPhy (pDevice, RequestedMediaType);
+ break;
+
+ default:
+ LmStatus = LM_STATUS_FAILURE;
+ break;
+ }
+
+ return LmStatus;
+} /* LM_ForceAutoNeg */
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+LM_STATUS LM_LoadFirmware (PLM_DEVICE_BLOCK pDevice,
+ PT3_FWIMG_INFO pFwImg,
+ LM_UINT32 LoadCpu, LM_UINT32 StartCpu)
+{
+ LM_UINT32 i;
+ LM_UINT32 address;
+
+ if (LoadCpu & T3_RX_CPU_ID) {
+ if (LM_HaltCpu (pDevice, T3_RX_CPU_ID) != LM_STATUS_SUCCESS) {
+ return LM_STATUS_FAILURE;
+ }
+
+ /* First of all clear scrach pad memory */
+ for (i = 0; i < T3_RX_CPU_SPAD_SIZE; i += 4) {
+ LM_RegWrInd (pDevice, T3_RX_CPU_SPAD_ADDR + i, 0);
+ }
+
+ /* Copy code first */
+ address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff);
+ for (i = 0; i <= pFwImg->Text.Length; i += 4) {
+ LM_RegWrInd (pDevice, address + i,
+ ((LM_UINT32 *) pFwImg->Text.Buffer)[i /
+ 4]);
+ }
+
+ address =
+ T3_RX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff);
+ for (i = 0; i <= pFwImg->ROnlyData.Length; i += 4) {
+ LM_RegWrInd (pDevice, address + i,
+ ((LM_UINT32 *) pFwImg->ROnlyData.
+ Buffer)[i / 4]);
+ }
+
+ address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff);
+ for (i = 0; i <= pFwImg->Data.Length; i += 4) {
+ LM_RegWrInd (pDevice, address + i,
+ ((LM_UINT32 *) pFwImg->Data.Buffer)[i /
+ 4]);
+ }
+ }
+
+ if (LoadCpu & T3_TX_CPU_ID) {
+ if (LM_HaltCpu (pDevice, T3_TX_CPU_ID) != LM_STATUS_SUCCESS) {
+ return LM_STATUS_FAILURE;
+ }
+
+ /* First of all clear scrach pad memory */
+ for (i = 0; i < T3_TX_CPU_SPAD_SIZE; i += 4) {
+ LM_RegWrInd (pDevice, T3_TX_CPU_SPAD_ADDR + i, 0);
+ }
+
+ /* Copy code first */
+ address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff);
+ for (i = 0; i <= pFwImg->Text.Length; i += 4) {
+ LM_RegWrInd (pDevice, address + i,
+ ((LM_UINT32 *) pFwImg->Text.Buffer)[i /
+ 4]);
+ }
+
+ address =
+ T3_TX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff);
+ for (i = 0; i <= pFwImg->ROnlyData.Length; i += 4) {
+ LM_RegWrInd (pDevice, address + i,
+ ((LM_UINT32 *) pFwImg->ROnlyData.
+ Buffer)[i / 4]);
+ }
+
+ address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff);
+ for (i = 0; i <= pFwImg->Data.Length; i += 4) {
+ LM_RegWrInd (pDevice, address + i,
+ ((LM_UINT32 *) pFwImg->Data.Buffer)[i /
+ 4]);
+ }
+ }
+
+ if (StartCpu & T3_RX_CPU_ID) {
+ /* Start Rx CPU */
+ REG_WR (pDevice, rxCpu.reg.state, 0xffffffff);
+ REG_WR (pDevice, rxCpu.reg.PC, pFwImg->StartAddress);
+ for (i = 0; i < 5; i++) {
+ if (pFwImg->StartAddress ==
+ REG_RD (pDevice, rxCpu.reg.PC))
+ break;
+
+ REG_WR (pDevice, rxCpu.reg.state, 0xffffffff);
+ REG_WR (pDevice, rxCpu.reg.mode, CPU_MODE_HALT);
+ REG_WR (pDevice, rxCpu.reg.PC, pFwImg->StartAddress);
+ MM_Wait (1000);
+ }
+
+ REG_WR (pDevice, rxCpu.reg.state, 0xffffffff);
+ REG_WR (pDevice, rxCpu.reg.mode, 0);
+ }
+
+ if (StartCpu & T3_TX_CPU_ID) {
+ /* Start Tx CPU */
+ REG_WR (pDevice, txCpu.reg.state, 0xffffffff);
+ REG_WR (pDevice, txCpu.reg.PC, pFwImg->StartAddress);
+ for (i = 0; i < 5; i++) {
+ if (pFwImg->StartAddress ==
+ REG_RD (pDevice, txCpu.reg.PC))
+ break;
+
+ REG_WR (pDevice, txCpu.reg.state, 0xffffffff);
+ REG_WR (pDevice, txCpu.reg.mode, CPU_MODE_HALT);
+ REG_WR (pDevice, txCpu.reg.PC, pFwImg->StartAddress);
+ MM_Wait (1000);
+ }
+
+ REG_WR (pDevice, txCpu.reg.state, 0xffffffff);
+ REG_WR (pDevice, txCpu.reg.mode, 0);
+ }
+
+ return LM_STATUS_SUCCESS;
+}
+
+STATIC LM_STATUS LM_HaltCpu (PLM_DEVICE_BLOCK pDevice, LM_UINT32 cpu_number)
+{
+ LM_UINT32 i;
+
+ if (cpu_number == T3_RX_CPU_ID) {
+ for (i = 0; i < 10000; i++) {
+ REG_WR (pDevice, rxCpu.reg.state, 0xffffffff);
+ REG_WR (pDevice, rxCpu.reg.mode, CPU_MODE_HALT);
+
+ if (REG_RD (pDevice, rxCpu.reg.mode) & CPU_MODE_HALT)
+ break;
+ }
+
+ REG_WR (pDevice, rxCpu.reg.state, 0xffffffff);
+ REG_WR (pDevice, rxCpu.reg.mode, CPU_MODE_HALT);
+ MM_Wait (10);
+ } else {
+ for (i = 0; i < 10000; i++) {
+ REG_WR (pDevice, txCpu.reg.state, 0xffffffff);
+ REG_WR (pDevice, txCpu.reg.mode, CPU_MODE_HALT);
+
+ if (REG_RD (pDevice, txCpu.reg.mode) & CPU_MODE_HALT)
+ break;
+ }
+ }
+
+ return ((i == 10000) ? LM_STATUS_FAILURE : LM_STATUS_SUCCESS);
+}
+
+int LM_BlinkLED (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDurationSec)
+{
+ LM_UINT32 Oldcfg;
+ int j;
+ int ret = 0;
+
+ if (BlinkDurationSec == 0) {
+ return 0;
+ }
+ if (BlinkDurationSec > 120) {
+ BlinkDurationSec = 120;
+ }
+
+ Oldcfg = REG_RD (pDevice, MacCtrl.LedCtrl);
+ for (j = 0; j < BlinkDurationSec * 2; j++) {
+ if (j % 2) {
+ /* Turn on the LEDs. */
+ REG_WR (pDevice, MacCtrl.LedCtrl,
+ LED_CTRL_OVERRIDE_LINK_LED |
+ LED_CTRL_1000MBPS_LED_ON |
+ LED_CTRL_100MBPS_LED_ON |
+ LED_CTRL_10MBPS_LED_ON |
+ LED_CTRL_OVERRIDE_TRAFFIC_LED |
+ LED_CTRL_BLINK_TRAFFIC_LED |
+ LED_CTRL_TRAFFIC_LED);
+ } else {
+ /* Turn off the LEDs. */
+ REG_WR (pDevice, MacCtrl.LedCtrl,
+ LED_CTRL_OVERRIDE_LINK_LED |
+ LED_CTRL_OVERRIDE_TRAFFIC_LED);
+ }
+
+#ifndef EMBEDDED
+ current->state = TASK_INTERRUPTIBLE;
+ if (schedule_timeout (HZ / 2) != 0) {
+ ret = -EINTR;
+ break;
+ }
+#else
+ udelay (100000); /* 1s sleep */
+#endif
+ }
+ REG_WR (pDevice, MacCtrl.LedCtrl, Oldcfg);
+ return ret;
+}
+
+int t3_do_dma (PLM_DEVICE_BLOCK pDevice,
+ LM_PHYSICAL_ADDRESS host_addr_phy, int length, int dma_read)
+{
+ T3_DMA_DESC dma_desc;
+ int i;
+ LM_UINT32 dma_desc_addr;
+ LM_UINT32 value32;
+
+ REG_WR (pDevice, BufMgr.Mode, 0);
+ REG_WR (pDevice, Ftq.Reset, 0);
+
+ dma_desc.host_addr.High = host_addr_phy.High;
+ dma_desc.host_addr.Low = host_addr_phy.Low;
+ dma_desc.nic_mbuf = 0x2100;
+ dma_desc.len = length;
+ dma_desc.flags = 0x00000004; /* Generate Rx-CPU event */
+
+ if (dma_read) {
+ dma_desc.cqid_sqid = (T3_QID_RX_BD_COMP << 8) |
+ T3_QID_DMA_HIGH_PRI_READ;
+ REG_WR (pDevice, DmaRead.Mode, DMA_READ_MODE_ENABLE);
+ } else {
+ dma_desc.cqid_sqid = (T3_QID_RX_DATA_COMP << 8) |
+ T3_QID_DMA_HIGH_PRI_WRITE;
+ REG_WR (pDevice, DmaWrite.Mode, DMA_WRITE_MODE_ENABLE);
+ }
+
+ dma_desc_addr = T3_NIC_DMA_DESC_POOL_ADDR;
+
+ /* Writing this DMA descriptor to DMA memory */
+ for (i = 0; i < sizeof (T3_DMA_DESC); i += 4) {
+ value32 = *((PLM_UINT32) (((PLM_UINT8) & dma_desc) + i));
+ MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG,
+ dma_desc_addr + i);
+ MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_DATA_REG,
+ cpu_to_le32 (value32));
+ }
+ MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, 0);
+
+ if (dma_read)
+ REG_WR (pDevice, Ftq.DmaHighReadFtqFifoEnqueueDequeue,
+ dma_desc_addr);
+ else
+ REG_WR (pDevice, Ftq.DmaHighWriteFtqFifoEnqueueDequeue,
+ dma_desc_addr);
+
+ for (i = 0; i < 40; i++) {
+ if (dma_read)
+ value32 =
+ REG_RD (pDevice,
+ Ftq.RcvBdCompFtqFifoEnqueueDequeue);
+ else
+ value32 =
+ REG_RD (pDevice,
+ Ftq.RcvDataCompFtqFifoEnqueueDequeue);
+
+ if ((value32 & 0xffff) == dma_desc_addr)
+ break;
+
+ MM_Wait (10);
+ }
+
+ return LM_STATUS_SUCCESS;
+}
+
+STATIC LM_STATUS
+LM_DmaTest (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt,
+ LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize)
+{
+ int j;
+ LM_UINT32 *ptr;
+ int dma_success = 0;
+
+ if (T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
+ T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5701) {
+ return LM_STATUS_SUCCESS;
+ }
+ while (!dma_success) {
+ /* Fill data with incremental patterns */
+ ptr = (LM_UINT32 *) pBufferVirt;
+ for (j = 0; j < BufferSize / 4; j++)
+ *ptr++ = j;
+
+ if (t3_do_dma (pDevice, BufferPhy, BufferSize, 1) ==
+ LM_STATUS_FAILURE) {
+ return LM_STATUS_FAILURE;
+ }
+
+ MM_Wait (40);
+ ptr = (LM_UINT32 *) pBufferVirt;
+ /* Fill data with zero */
+ for (j = 0; j < BufferSize / 4; j++)
+ *ptr++ = 0;
+
+ if (t3_do_dma (pDevice, BufferPhy, BufferSize, 0) ==
+ LM_STATUS_FAILURE) {
+ return LM_STATUS_FAILURE;
+ }
+
+ MM_Wait (40);
+ /* Check for data */
+ ptr = (LM_UINT32 *) pBufferVirt;
+ for (j = 0; j < BufferSize / 4; j++) {
+ if (*ptr++ != j) {
+ if ((pDevice->
+ DmaReadWriteCtrl &
+ DMA_CTRL_WRITE_BOUNDARY_MASK)
+ == DMA_CTRL_WRITE_BOUNDARY_DISABLE) {
+ pDevice->DmaReadWriteCtrl =
+ (pDevice->
+ DmaReadWriteCtrl &
+ ~DMA_CTRL_WRITE_BOUNDARY_MASK) |
+ DMA_CTRL_WRITE_BOUNDARY_16;
+ REG_WR (pDevice,
+ PciCfg.DmaReadWriteCtrl,
+ pDevice->DmaReadWriteCtrl);
+ break;
+ } else {
+ return LM_STATUS_FAILURE;
+ }
+ }
+ }
+ if (j == (BufferSize / 4))
+ dma_success = 1;
+ }
+ return LM_STATUS_SUCCESS;
+}
+
+#endif
diff --git a/drivers/net/tigon3.h b/drivers/net/tigon3.h
new file mode 100644
index 0000000..c03347f
--- /dev/null
+++ b/drivers/net/tigon3.h
@@ -0,0 +1,3339 @@
+
+/******************************************************************************/
+/* */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */
+/* Corporation. */
+/* All rights reserved. */
+/* */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation, located in the file LICENSE. */
+/* */
+/* History: */
+/* */
+/******************************************************************************/
+
+#ifndef TIGON3_H
+#define TIGON3_H
+
+#include "bcm570x_lm.h"
+#if INCLUDE_TBI_SUPPORT
+#include "bcm570x_autoneg.h"
+#endif
+
+/* io defines */
+#if !defined(BIG_ENDIAN_HOST)
+#define readl(addr) \
+ (LONGSWAP((*(volatile unsigned int *)(addr))))
+#define writel(b,addr) \
+ ((*(volatile unsigned int *)(addr)) = (LONGSWAP(b)))
+#else
+#if 0 /* !defined(PPC603) */
+#define readl(addr) (*(volatile unsigned int*)(0xa0000000 + (unsigned long)(addr)))
+#define writel(b,addr) ((*(volatile unsigned int *) ((unsigned long)(addr) + 0xa0000000)) = (b))
+#else
+#if 1
+#define readl(addr) (*(volatile unsigned int*)(addr))
+#define writel(b,addr) ((*(volatile unsigned int *) (addr)) = (b))
+#else
+extern int sprintf (char *buf, const char *f, ...);
+static __inline unsigned int readl (void *addr)
+{
+ char buf[128];
+ unsigned int tmp = (*(volatile unsigned int *)(addr));
+ sprintf (buf, "%s:%s: read 0x%x from 0x%x\n", __FILE__, __LINE__, tmp,
+ addr, 0, 0);
+ sysSerialPrintString (buf);
+ return tmp;
+}
+static __inline void writel (unsigned int b, unsigned int addr)
+{
+ char buf[128];
+ ((*(volatile unsigned int *)(addr)) = (b));
+ sprintf (buf, "%s:%s: write 0x%x to 0x%x\n", __FILE__, __LINE__, b,
+ addr, 0, 0);
+ sysSerialPrintString (buf);
+}
+#endif
+#endif /* PPC603 */
+#endif
+
+/******************************************************************************/
+/* Constants. */
+/******************************************************************************/
+
+/* Maxim number of packet descriptors used for sending packets. */
+#define MAX_TX_PACKET_DESC_COUNT 600
+#define DEFAULT_TX_PACKET_DESC_COUNT 2
+
+/* Maximum number of packet descriptors used for receiving packets. */
+#if T3_JUMBO_RCB_ENTRY_COUNT
+#define MAX_RX_PACKET_DESC_COUNT \
+ (T3_STD_RCV_RCB_ENTRY_COUNT + T3_JUMBO_RCV_RCB_ENTRY_COUNT)
+#else
+#define MAX_RX_PACKET_DESC_COUNT 800
+#endif
+#define DEFAULT_RX_PACKET_DESC_COUNT 2
+
+/* Threshhold for double copying small tx packets. 0 will disable double */
+/* copying of small Tx packets. */
+#define DEFAULT_TX_COPY_BUFFER_SIZE 0
+#define MIN_TX_COPY_BUFFER_SIZE 64
+#define MAX_TX_COPY_BUFFER_SIZE 512
+
+/* Cache line. */
+#define COMMON_CACHE_LINE_SIZE 0x20
+#define COMMON_CACHE_LINE_MASK (COMMON_CACHE_LINE_SIZE-1)
+
+/* Maximum number of fragment we can handle. */
+#ifndef MAX_FRAGMENT_COUNT
+#define MAX_FRAGMENT_COUNT 32
+#endif
+
+/* B0 bug. */
+#define BCM5700_BX_MIN_FRAG_SIZE 10
+#define BCM5700_BX_MIN_FRAG_BUF_SIZE 16 /* nice aligned size. */
+#define BCM5700_BX_MIN_FRAG_BUF_SIZE_MASK (BCM5700_BX_MIN_FRAG_BUF_SIZE-1)
+#define BCM5700_BX_TX_COPY_BUF_SIZE (BCM5700_BX_MIN_FRAG_BUF_SIZE * \
+ MAX_FRAGMENT_COUNT)
+
+/* MAGIC number. */
+/* #define T3_MAGIC_NUM 'KevT' */
+#define T3_FIRMWARE_MAILBOX 0x0b50
+#define T3_MAGIC_NUM 0x4B657654
+#define T3_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE 0x4861764b
+
+#define T3_NIC_DATA_SIG_ADDR 0x0b54
+#define T3_NIC_DATA_SIG 0x4b657654
+
+#define T3_NIC_DATA_NIC_CFG_ADDR 0x0b58
+#define T3_NIC_CFG_LED_MODE_UNKNOWN BIT_NONE
+#define T3_NIC_CFG_LED_MODE_TRIPLE_SPEED BIT_2
+#define T3_NIC_CFG_LED_MODE_LINK_SPEED BIT_3
+#define T3_NIC_CFG_LED_MODE_OPEN_DRAIN BIT_2
+#define T3_NIC_CFG_LED_MODE_OUTPUT BIT_3
+#define T3_NIC_CFG_LED_MODE_MASK (BIT_2 | BIT_3)
+#define T3_NIC_CFG_PHY_TYPE_UNKNOWN BIT_NONE
+#define T3_NIC_CFG_PHY_TYPE_COPPER BIT_4
+#define T3_NIC_CFG_PHY_TYPE_FIBER BIT_5
+#define T3_NIC_CFG_PHY_TYPE_MASK (BIT_4 | BIT_5)
+#define T3_NIC_CFG_ENABLE_WOL BIT_6
+#define T3_NIC_CFG_ENABLE_ASF BIT_7
+#define T3_NIC_EEPROM_WP BIT_8
+
+#define T3_NIC_DATA_PHY_ID_ADDR 0x0b74
+#define T3_NIC_PHY_ID1_MASK 0xffff0000
+#define T3_NIC_PHY_ID2_MASK 0x0000ffff
+
+#define T3_CMD_MAILBOX 0x0b78
+#define T3_CMD_NICDRV_ALIVE 0x01
+#define T3_CMD_NICDRV_PAUSE_FW 0x02
+#define T3_CMD_NICDRV_IPV4ADDR_CHANGE 0x03
+#define T3_CMD_NICDRV_IPV6ADDR_CHANGE 0x04
+#define T3_CMD_5703A0_FIX_DMAFW_DMAR 0x05
+#define T3_CMD_5703A0_FIX_DMAFW_DMAW 0x06
+
+#define T3_CMD_LENGTH_MAILBOX 0x0b7c
+#define T3_CMD_DATA_MAILBOX 0x0b80
+
+#define T3_ASF_FW_STATUS_MAILBOX 0x0c00
+
+#define T3_DRV_STATE_MAILBOX 0x0c04
+#define T3_DRV_STATE_START 0x01
+#define T3_DRV_STATE_UNLOAD 0x02
+#define T3_DRV_STATE_WOL 0x03
+#define T3_DRV_STATE_SUSPEND 0x04
+
+#define T3_FW_RESET_TYPE_MAILBOX 0x0c08
+
+#define T3_MAC_ADDR_HIGH_MAILBOX 0x0c14
+#define T3_MAC_ADDR_LOW_MAILBOX 0x0c18
+
+/******************************************************************************/
+/* Hardware constants. */
+/******************************************************************************/
+
+/* Number of entries in the send ring: must be 512. */
+#define T3_SEND_RCB_ENTRY_COUNT 512
+#define T3_SEND_RCB_ENTRY_COUNT_MASK (T3_SEND_RCB_ENTRY_COUNT-1)
+
+/* Number of send RCBs. May be 1-16 but for now, only support one. */
+#define T3_MAX_SEND_RCB_COUNT 16
+
+/* Number of entries in the Standard Receive RCB. Must be 512 entries. */
+#define T3_STD_RCV_RCB_ENTRY_COUNT 512
+#define T3_STD_RCV_RCB_ENTRY_COUNT_MASK (T3_STD_RCV_RCB_ENTRY_COUNT-1)
+#define DEFAULT_STD_RCV_DESC_COUNT 200 /* Must be < 512. */
+#define MAX_STD_RCV_BUFFER_SIZE 0x600
+
+/* Number of entries in the Mini Receive RCB. This value can either be */
+/* 0, 1024. Currently Mini Receive RCB is disabled. */
+#ifndef T3_MINI_RCV_RCB_ENTRY_COUNT
+#define T3_MINI_RCV_RCB_ENTRY_COUNT 0
+#endif /* T3_MINI_RCV_RCB_ENTRY_COUNT */
+#define T3_MINI_RCV_RCB_ENTRY_COUNT_MASK (T3_MINI_RCV_RCB_ENTRY_COUNT-1)
+#define MAX_MINI_RCV_BUFFER_SIZE 512
+#define DEFAULT_MINI_RCV_BUFFER_SIZE 64
+#define DEFAULT_MINI_RCV_DESC_COUNT 100 /* Must be < 1024. */
+
+/* Number of entries in the Jumbo Receive RCB. This value must 256 or 0. */
+/* Currently, Jumbo Receive RCB is disabled. */
+#ifndef T3_JUMBO_RCV_RCB_ENTRY_COUNT
+#define T3_JUMBO_RCV_RCB_ENTRY_COUNT 0
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+#define T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK (T3_JUMBO_RCV_RCB_ENTRY_COUNT-1)
+
+#define MAX_JUMBO_RCV_BUFFER_SIZE (10 * 1024) /* > 1514 */
+#define DEFAULT_JUMBO_RCV_BUFFER_SIZE (4 * 1024) /* > 1514 */
+#define DEFAULT_JUMBO_RCV_DESC_COUNT 128 /* Must be < 256. */
+
+#define MAX_JUMBO_TX_BUFFER_SIZE (8 * 1024) /* > 1514 */
+#define DEFAULT_JUMBO_TX_BUFFER_SIZE (4 * 1024) /* > 1514 */
+
+/* Number of receive return RCBs. Maybe 1-16 but for now, only support one. */
+#define T3_MAX_RCV_RETURN_RCB_COUNT 16
+
+/* Number of entries in a Receive Return ring. This value is either 1024 */
+/* or 2048. */
+#ifndef T3_RCV_RETURN_RCB_ENTRY_COUNT
+#define T3_RCV_RETURN_RCB_ENTRY_COUNT 1024
+#endif /* T3_RCV_RETURN_RCB_ENTRY_COUNT */
+#define T3_RCV_RETURN_RCB_ENTRY_COUNT_MASK (T3_RCV_RETURN_RCB_ENTRY_COUNT-1)
+
+/* Default coalescing parameters. */
+#define DEFAULT_RX_COALESCING_TICKS 100
+#define MAX_RX_COALESCING_TICKS 500
+#define DEFAULT_TX_COALESCING_TICKS 400
+#define MAX_TX_COALESCING_TICKS 500
+#define DEFAULT_RX_MAX_COALESCED_FRAMES 10
+#define MAX_RX_MAX_COALESCED_FRAMES 100
+#define ADAPTIVE_LO_RX_MAX_COALESCED_FRAMES 5
+#define ADAPTIVE_HI_RX_MAX_COALESCED_FRAMES 42
+#define ADAPTIVE_LO_RX_COALESCING_TICKS 50
+#define ADAPTIVE_HI_RX_COALESCING_TICKS 300
+#define ADAPTIVE_LO_PKT_THRESH 30000
+#define ADAPTIVE_HI_PKT_THRESH 74000
+#define DEFAULT_TX_MAX_COALESCED_FRAMES 40
+#define ADAPTIVE_LO_TX_MAX_COALESCED_FRAMES 25
+#define ADAPTIVE_HI_TX_MAX_COALESCED_FRAMES 75
+#define MAX_TX_MAX_COALESCED_FRAMES 100
+
+#define DEFAULT_RX_COALESCING_TICKS_DURING_INT 25
+#define DEFAULT_TX_COALESCING_TICKS_DURING_INT 25
+#define DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT 5
+#define DEFAULT_TX_MAX_COALESCED_FRAMES_DURING_INT 5
+
+#define BAD_DEFAULT_VALUE 0xffffffff
+
+#define DEFAULT_STATS_COALESCING_TICKS 1000000
+#define MAX_STATS_COALESCING_TICKS 3600000000U
+
+/* Receive BD Replenish thresholds. */
+#define DEFAULT_RCV_STD_BD_REPLENISH_THRESHOLD 4
+#define DEFAULT_RCV_JUMBO_BD_REPLENISH_THRESHOLD 4
+
+#define SPLIT_MODE_DISABLE 0
+#define SPLIT_MODE_ENABLE 1
+
+#define SPLIT_MODE_5704_MAX_REQ 3
+
+/* Maximum physical fragment size. */
+#define MAX_FRAGMENT_SIZE (64 * 1024)
+
+/* Standard view. */
+#define T3_STD_VIEW_SIZE (64 * 1024)
+#define T3_FLAT_VIEW_SIZE (32 * 1024 * 1024)
+
+/* Buffer descriptor base address on the NIC's memory. */
+
+#define T3_NIC_SND_BUFFER_DESC_ADDR 0x4000
+#define T3_NIC_STD_RCV_BUFFER_DESC_ADDR 0x6000
+#define T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR 0x7000
+
+#define T3_NIC_STD_RCV_BUFFER_DESC_ADDR_EXT_MEM 0xc000
+#define T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR_EXT_MEM 0xd000
+#define T3_NIC_MINI_RCV_BUFFER_DESC_ADDR_EXT_MEM 0xe000
+
+#define T3_NIC_SND_BUFFER_DESC_SIZE (T3_SEND_RCB_ENTRY_COUNT * \
+ sizeof(T3_SND_BD) / 4)
+
+#define T3_NIC_STD_RCV_BUFFER_DESC_SIZE (T3_STD_RCV_RCB_ENTRY_COUNT * \
+ sizeof(T3_RCV_BD) / 4)
+
+#define T3_NIC_JUMBO_RCV_BUFFER_DESC_SIZE (T3_JUMBO_RCV_RCB_ENTRY_COUNT * \
+ sizeof(T3_EXT_RCV_BD) / 4)
+
+/* MBUF pool. */
+#define T3_NIC_MBUF_POOL_ADDR 0x8000
+/* #define T3_NIC_MBUF_POOL_SIZE 0x18000 */
+#define T3_NIC_MBUF_POOL_SIZE96 0x18000
+#define T3_NIC_MBUF_POOL_SIZE64 0x10000
+
+#define T3_NIC_MBUF_POOL_ADDR_EXT_MEM 0x20000
+
+/* DMA descriptor pool */
+#define T3_NIC_DMA_DESC_POOL_ADDR 0x2000
+#define T3_NIC_DMA_DESC_POOL_SIZE 0x2000 /* 8KB. */
+
+#define T3_DEF_DMA_MBUF_LOW_WMARK 0x40
+#define T3_DEF_RX_MAC_MBUF_LOW_WMARK 0x20
+#define T3_DEF_MBUF_HIGH_WMARK 0x60
+
+#define T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO 304
+#define T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO 152
+#define T3_DEF_MBUF_HIGH_WMARK_JUMBO 380
+
+#define T3_DEF_DMA_DESC_LOW_WMARK 5
+#define T3_DEF_DMA_DESC_HIGH_WMARK 10
+
+/* Maximum size of giant TCP packet can be sent */
+#define T3_TCP_SEG_MAX_OFFLOAD_SIZE 64*1000
+#define T3_TCP_SEG_MIN_NUM_SEG 20
+
+#define T3_RX_CPU_ID 0x1
+#define T3_TX_CPU_ID 0x2
+#define T3_RX_CPU_SPAD_ADDR 0x30000
+#define T3_RX_CPU_SPAD_SIZE 0x4000
+#define T3_TX_CPU_SPAD_ADDR 0x34000
+#define T3_TX_CPU_SPAD_SIZE 0x4000
+
+typedef struct T3_DIR_ENTRY {
+ PLM_UINT8 Buffer;
+ LM_UINT32 Offset;
+ LM_UINT32 Length;
+} T3_DIR_ENTRY, *PT3_DIR_ENTRY;
+
+typedef struct T3_FWIMG_INFO {
+ LM_UINT32 StartAddress;
+ T3_DIR_ENTRY Text;
+ T3_DIR_ENTRY ROnlyData;
+ T3_DIR_ENTRY Data;
+ T3_DIR_ENTRY Sbss;
+ T3_DIR_ENTRY Bss;
+} T3_FWIMG_INFO, *PT3_FWIMG_INFO;
+
+/******************************************************************************/
+/* Tigon3 PCI Registers. */
+/******************************************************************************/
+#define T3_PCI_ID_BCM5700 0x164414e4
+#define T3_PCI_ID_BCM5701 0x164514e4
+#define T3_PCI_ID_BCM5702 0x164614e4
+#define T3_PCI_ID_BCM5702x 0x16A614e4
+#define T3_PCI_ID_BCM5703 0x164714e4
+#define T3_PCI_ID_BCM5703x 0x16A714e4
+#define T3_PCI_ID_BCM5702FE 0x164D14e4
+#define T3_PCI_ID_BCM5704 0x164814e4
+
+#define T3_PCI_VENDOR_ID (T3_PCI_ID & 0xffff)
+#define T3_PCI_DEVICE_ID (T3_PCI_ID >> 16)
+
+#define T3_PCI_MISC_HOST_CTRL_REG 0x68
+
+/* The most significant 16bit of register 0x68. */
+/* ChipId:4, ChipRev:4, MetalRev:8 */
+#define T3_CHIP_ID_5700_A0 0x7000
+#define T3_CHIP_ID_5700_A1 0x7001
+#define T3_CHIP_ID_5700_B0 0x7100
+#define T3_CHIP_ID_5700_B1 0x7101
+#define T3_CHIP_ID_5700_C0 0x7200
+
+#define T3_CHIP_ID_5701_A0 0x0000
+#define T3_CHIP_ID_5701_B0 0x0100
+#define T3_CHIP_ID_5701_B2 0x0102
+#define T3_CHIP_ID_5701_B5 0x0105
+
+#define T3_CHIP_ID_5703_A0 0x1000
+#define T3_CHIP_ID_5703_A1 0x1001
+#define T3_CHIP_ID_5703_A2 0x1002
+
+#define T3_CHIP_ID_5704_A0 0x2000
+
+/* Chip Id. */
+#define T3_ASIC_REV(_ChipRevId) ((_ChipRevId) >> 12)
+#define T3_ASIC_REV_5700 0x07
+#define T3_ASIC_REV_5701 0x00
+#define T3_ASIC_REV_5703 0x01
+#define T3_ASIC_REV_5704 0x02
+
+/* Chip id and revision. */
+#define T3_CHIP_REV(_ChipRevId) ((_ChipRevId) >> 8)
+#define T3_CHIP_REV_5700_AX 0x70
+#define T3_CHIP_REV_5700_BX 0x71
+#define T3_CHIP_REV_5700_CX 0x72
+#define T3_CHIP_REV_5701_AX 0x00
+
+/* Metal revision. */
+#define T3_METAL_REV(_ChipRevId) ((_ChipRevId) & 0xff)
+#define T3_METAL_REV_A0 0x00
+#define T3_METAL_REV_A1 0x01
+#define T3_METAL_REV_B0 0x00
+#define T3_METAL_REV_B1 0x01
+#define T3_METAL_REV_B2 0x02
+
+#define T3_PCI_REG_CLOCK_CTRL 0x74
+
+#define T3_PCI_DISABLE_RX_CLOCK BIT_10
+#define T3_PCI_DISABLE_TX_CLOCK BIT_11
+#define T3_PCI_SELECT_ALTERNATE_CLOCK BIT_12
+#define T3_PCI_POWER_DOWN_PCI_PLL133 BIT_15
+#define T3_PCI_44MHZ_CORE_CLOCK BIT_18
+
+#define T3_PCI_REG_ADDR_REG 0x78
+#define T3_PCI_REG_DATA_REG 0x80
+
+#define T3_PCI_MEM_WIN_ADDR_REG 0x7c
+#define T3_PCI_MEM_WIN_DATA_REG 0x84
+
+#define T3_PCI_PM_CAP_REG 0x48
+
+#define T3_PCI_PM_CAP_PME_D3COLD BIT_31
+#define T3_PCI_PM_CAP_PME_D3HOT BIT_30
+
+#define T3_PCI_PM_STATUS_CTRL_REG 0x4c
+
+#define T3_PM_POWER_STATE_MASK (BIT_0 | BIT_1)
+#define T3_PM_POWER_STATE_D0 BIT_NONE
+#define T3_PM_POWER_STATE_D1 BIT_0
+#define T3_PM_POWER_STATE_D2 BIT_1
+#define T3_PM_POWER_STATE_D3 (BIT_0 | BIT_1)
+
+#define T3_PM_PME_ENABLE BIT_8
+#define T3_PM_PME_ASSERTED BIT_15
+
+/* PCI state register. */
+#define T3_PCI_STATE_REG 0x70
+
+#define T3_PCI_STATE_FORCE_RESET BIT_0
+#define T3_PCI_STATE_INT_NOT_ACTIVE BIT_1
+#define T3_PCI_STATE_CONVENTIONAL_PCI_MODE BIT_2
+#define T3_PCI_STATE_BUS_SPEED_HIGH BIT_3
+#define T3_PCI_STATE_32BIT_PCI_BUS BIT_4
+
+/* Broadcom subsystem/subvendor IDs. */
+#define T3_SVID_BROADCOM 0x14e4
+
+#define T3_SSID_BROADCOM_BCM95700A6 0x1644
+#define T3_SSID_BROADCOM_BCM95701A5 0x0001
+#define T3_SSID_BROADCOM_BCM95700T6 0x0002 /* BCM8002 */
+#define T3_SSID_BROADCOM_BCM95700A9 0x0003 /* Agilent */
+#define T3_SSID_BROADCOM_BCM95701T1 0x0005
+#define T3_SSID_BROADCOM_BCM95701T8 0x0006
+#define T3_SSID_BROADCOM_BCM95701A7 0x0007 /* Agilent */
+#define T3_SSID_BROADCOM_BCM95701A10 0x0008
+#define T3_SSID_BROADCOM_BCM95701A12 0x8008
+#define T3_SSID_BROADCOM_BCM95703Ax1 0x0009
+#define T3_SSID_BROADCOM_BCM95703Ax2 0x8009
+
+/* 3COM subsystem/subvendor IDs. */
+#define T3_SVID_3COM 0x10b7
+
+#define T3_SSID_3COM_3C996T 0x1000
+#define T3_SSID_3COM_3C996BT 0x1006
+#define T3_SSID_3COM_3C996CT 0x1002
+#define T3_SSID_3COM_3C997T 0x1003
+#define T3_SSID_3COM_3C1000T 0x1007
+#define T3_SSID_3COM_3C940BR01 0x1008
+
+/* Fiber boards. */
+#define T3_SSID_3COM_3C996SX 0x1004
+#define T3_SSID_3COM_3C997SX 0x1005
+
+/* Dell subsystem/subvendor IDs. */
+
+#define T3_SVID_DELL 0x1028
+
+#define T3_SSID_DELL_VIPER 0x00d1
+#define T3_SSID_DELL_JAGUAR 0x0106
+#define T3_SSID_DELL_MERLOT 0x0109
+#define T3_SSID_DELL_SLIM_MERLOT 0x010a
+
+/* Compaq subsystem/subvendor IDs */
+
+#define T3_SVID_COMPAQ 0x0e11
+
+#define T3_SSID_COMPAQ_BANSHEE 0x007c
+#define T3_SSID_COMPAQ_BANSHEE_2 0x009a
+#define T3_SSID_COMPAQ_CHANGELING 0x007d
+#define T3_SSID_COMPAQ_NC7780 0x0085
+#define T3_SSID_COMPAQ_NC7780_2 0x0099
+
+/******************************************************************************/
+/* MII registers. */
+/******************************************************************************/
+
+/* Control register. */
+#define PHY_CTRL_REG 0x00
+
+#define PHY_CTRL_SPEED_MASK (BIT_6 | BIT_13)
+#define PHY_CTRL_SPEED_SELECT_10MBPS BIT_NONE
+#define PHY_CTRL_SPEED_SELECT_100MBPS BIT_13
+#define PHY_CTRL_SPEED_SELECT_1000MBPS BIT_6
+#define PHY_CTRL_COLLISION_TEST_ENABLE BIT_7
+#define PHY_CTRL_FULL_DUPLEX_MODE BIT_8
+#define PHY_CTRL_RESTART_AUTO_NEG BIT_9
+#define PHY_CTRL_ISOLATE_PHY BIT_10
+#define PHY_CTRL_LOWER_POWER_MODE BIT_11
+#define PHY_CTRL_AUTO_NEG_ENABLE BIT_12
+#define PHY_CTRL_LOOPBACK_MODE BIT_14
+#define PHY_CTRL_PHY_RESET BIT_15
+
+/* Status register. */
+#define PHY_STATUS_REG 0x01
+
+#define PHY_STATUS_LINK_PASS BIT_2
+#define PHY_STATUS_AUTO_NEG_COMPLETE BIT_5
+
+/* Phy Id registers. */
+#define PHY_ID1_REG 0x02
+#define PHY_ID1_OUI_MASK 0xffff
+
+#define PHY_ID2_REG 0x03
+#define PHY_ID2_REV_MASK 0x000f
+#define PHY_ID2_MODEL_MASK 0x03f0
+#define PHY_ID2_OUI_MASK 0xfc00
+
+/* Auto-negotiation advertisement register. */
+#define PHY_AN_AD_REG 0x04
+
+#define PHY_AN_AD_ASYM_PAUSE BIT_11
+#define PHY_AN_AD_PAUSE_CAPABLE BIT_10
+#define PHY_AN_AD_10BASET_HALF BIT_5
+#define PHY_AN_AD_10BASET_FULL BIT_6
+#define PHY_AN_AD_100BASETX_HALF BIT_7
+#define PHY_AN_AD_100BASETX_FULL BIT_8
+#define PHY_AN_AD_PROTOCOL_802_3_CSMA_CD 0x01
+
+/* Auto-negotiation Link Partner Ability register. */
+#define PHY_LINK_PARTNER_ABILITY_REG 0x05
+
+#define PHY_LINK_PARTNER_ASYM_PAUSE BIT_11
+#define PHY_LINK_PARTNER_PAUSE_CAPABLE BIT_10
+
+/* Auto-negotiation expansion register. */
+#define PHY_AN_EXPANSION_REG 0x06
+
+/******************************************************************************/
+/* BCM5400 and BCM5401 phy info. */
+/******************************************************************************/
+
+#define PHY_DEVICE_ID 1
+
+/* OUI: bit 31-10; Model#: bit 9-4; Rev# bit 3-0. */
+#define PHY_UNKNOWN_PHY 0x00000000
+#define PHY_BCM5400_PHY_ID 0x60008040
+#define PHY_BCM5401_PHY_ID 0x60008050
+#define PHY_BCM5411_PHY_ID 0x60008070
+#define PHY_BCM5701_PHY_ID 0x60008110
+#define PHY_BCM5703_PHY_ID 0x60008160
+#define PHY_BCM5704_PHY_ID 0x60008190
+#define PHY_BCM8002_PHY_ID 0x60010140
+
+#define PHY_BCM5401_B0_REV 0x1
+#define PHY_BCM5401_B2_REV 0x3
+#define PHY_BCM5401_C0_REV 0x6
+
+#define PHY_ID_OUI_MASK 0xfffffc00
+#define PHY_ID_MODEL_MASK 0x000003f0
+#define PHY_ID_REV_MASK 0x0000000f
+#define PHY_ID_MASK (PHY_ID_OUI_MASK | \
+ PHY_ID_MODEL_MASK)
+
+#define UNKNOWN_PHY_ID(x) ((((x) & PHY_ID_MASK) != PHY_BCM5400_PHY_ID) && \
+ (((x) & PHY_ID_MASK) != PHY_BCM5401_PHY_ID) && \
+ (((x) & PHY_ID_MASK) != PHY_BCM5411_PHY_ID) && \
+ (((x) & PHY_ID_MASK) != PHY_BCM5701_PHY_ID) && \
+ (((x) & PHY_ID_MASK) != PHY_BCM5703_PHY_ID) && \
+ (((x) & PHY_ID_MASK) != PHY_BCM5704_PHY_ID) && \
+ (((x) & PHY_ID_MASK) != PHY_BCM8002_PHY_ID))
+
+/* 1000Base-T control register. */
+#define BCM540X_1000BASET_CTRL_REG 0x09
+
+#define BCM540X_AN_AD_1000BASET_HALF BIT_8
+#define BCM540X_AN_AD_1000BASET_FULL BIT_9
+#define BCM540X_CONFIG_AS_MASTER BIT_11
+#define BCM540X_ENABLE_CONFIG_AS_MASTER BIT_12
+
+/* Extended control register. */
+#define BCM540X_EXT_CTRL_REG 0x10
+
+#define BCM540X_EXT_CTRL_LINK3_LED_MODE BIT_1
+#define BCM540X_EXT_CTRL_TBI BIT_15
+
+/* PHY extended status register. */
+#define BCM540X_EXT_STATUS_REG 0x11
+
+#define BCM540X_EXT_STATUS_LINK_PASS BIT_8
+
+/* DSP Coefficient Read/Write Port. */
+#define BCM540X_DSP_RW_PORT 0x15
+
+/* DSP Coeficient Address Register. */
+#define BCM540X_DSP_ADDRESS_REG 0x17
+
+#define BCM540X_DSP_TAP_NUMBER_MASK 0x00
+#define BCM540X_DSP_AGC_A 0x00
+#define BCM540X_DSP_AGC_B 0x01
+#define BCM540X_DSP_MSE_PAIR_STATUS 0x02
+#define BCM540X_DSP_SOFT_DECISION 0x03
+#define BCM540X_DSP_PHASE_REG 0x04
+#define BCM540X_DSP_SKEW 0x05
+#define BCM540X_DSP_POWER_SAVER_UPPER_BOUND 0x06
+#define BCM540X_DSP_POWER_SAVER_LOWER_BOUND 0x07
+#define BCM540X_DSP_LAST_ECHO 0x08
+#define BCM540X_DSP_FREQUENCY 0x09
+#define BCM540X_DSP_PLL_BANDWIDTH 0x0a
+#define BCM540X_DSP_PLL_PHASE_OFFSET 0x0b
+
+#define BCM540X_DSP_FILTER_DCOFFSET (BIT_10 | BIT_11)
+#define BCM540X_DSP_FILTER_FEXT3 (BIT_8 | BIT_9 | BIT_11)
+#define BCM540X_DSP_FILTER_FEXT2 (BIT_9 | BIT_11)
+#define BCM540X_DSP_FILTER_FEXT1 (BIT_8 | BIT_11)
+#define BCM540X_DSP_FILTER_FEXT0 BIT_11
+#define BCM540X_DSP_FILTER_NEXT3 (BIT_8 | BIT_9 | BIT_10)
+#define BCM540X_DSP_FILTER_NEXT2 (BIT_9 | BIT_10)
+#define BCM540X_DSP_FILTER_NEXT1 (BIT_8 | BIT_10)
+#define BCM540X_DSP_FILTER_NEXT0 BIT_10
+#define BCM540X_DSP_FILTER_ECHO (BIT_8 | BIT_9)
+#define BCM540X_DSP_FILTER_DFE BIT_9
+#define BCM540X_DSP_FILTER_FFE BIT_8
+
+#define BCM540X_DSP_CONTROL_ALL_FILTERS BIT_12
+
+#define BCM540X_DSP_SEL_CH_0 BIT_NONE
+#define BCM540X_DSP_SEL_CH_1 BIT_13
+#define BCM540X_DSP_SEL_CH_2 BIT_14
+#define BCM540X_DSP_SEL_CH_3 (BIT_13 | BIT_14)
+
+#define BCM540X_CONTROL_ALL_CHANNELS BIT_15
+
+/* Auxilliary Control Register (Shadow Register) */
+#define BCM5401_AUX_CTRL 0x18
+
+#define BCM5401_SHADOW_SEL_MASK 0x7
+#define BCM5401_SHADOW_SEL_NORMAL 0x00
+#define BCM5401_SHADOW_SEL_10BASET 0x01
+#define BCM5401_SHADOW_SEL_POWER_CONTROL 0x02
+#define BCM5401_SHADOW_SEL_IP_PHONE 0x03
+#define BCM5401_SHADOW_SEL_MISC_TEST1 0x04
+#define BCM5401_SHADOW_SEL_MISC_TEST2 0x05
+#define BCM5401_SHADOW_SEL_IP_PHONE_SEED 0x06
+
+/* Shadow register selector == '000' */
+#define BCM5401_SHDW_NORMAL_DIAG_MODE BIT_3
+#define BCM5401_SHDW_NORMAL_DISABLE_MBP BIT_4
+#define BCM5401_SHDW_NORMAL_DISABLE_LOW_PWR BIT_5
+#define BCM5401_SHDW_NORMAL_DISABLE_INV_PRF BIT_6
+#define BCM5401_SHDW_NORMAL_DISABLE_PRF BIT_7
+#define BCM5401_SHDW_NORMAL_RX_SLICING_NORMAL BIT_NONE
+#define BCM5401_SHDW_NORMAL_RX_SLICING_4D BIT_8
+#define BCM5401_SHDW_NORMAL_RX_SLICING_3LVL_1D BIT_9
+#define BCM5401_SHDW_NORMAL_RX_SLICING_5LVL_1D (BIT_8 | BIT_9)
+#define BCM5401_SHDW_NORMAL_TX_6DB_CODING BIT_10
+#define BCM5401_SHDW_NORMAL_ENABLE_SM_DSP_CLOCK BIT_11
+#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_4NS BIT_NONE
+#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_5NS BIT_12
+#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_3NS BIT_13
+#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_0NS (BIT_12 | BIT_13)
+#define BCM5401_SHDW_NORMAL_EXT_PACKET_LENGTH BIT_14
+#define BCM5401_SHDW_NORMAL_EXTERNAL_LOOPBACK BIT_15
+
+/* Auxilliary status summary. */
+#define BCM540X_AUX_STATUS_REG 0x19
+
+#define BCM540X_AUX_LINK_PASS BIT_2
+#define BCM540X_AUX_SPEED_MASK (BIT_8 | BIT_9 | BIT_10)
+#define BCM540X_AUX_10BASET_HD BIT_8
+#define BCM540X_AUX_10BASET_FD BIT_9
+#define BCM540X_AUX_100BASETX_HD (BIT_8 | BIT_9)
+#define BCM540X_AUX_100BASET4 BIT_10
+#define BCM540X_AUX_100BASETX_FD (BIT_8 | BIT_10)
+#define BCM540X_AUX_100BASET_HD (BIT_9 | BIT_10)
+#define BCM540X_AUX_100BASET_FD (BIT_8 | BIT_9 | BIT_10)
+
+/* Interrupt status. */
+#define BCM540X_INT_STATUS_REG 0x1a
+
+#define BCM540X_INT_LINK_CHANGE BIT_1
+#define BCM540X_INT_SPEED_CHANGE BIT_2
+#define BCM540X_INT_DUPLEX_CHANGE BIT_3
+#define BCM540X_INT_AUTO_NEG_PAGE_RX BIT_10
+
+/* Interrupt mask register. */
+#define BCM540X_INT_MASK_REG 0x1b
+
+/******************************************************************************/
+/* Register definitions. */
+/******************************************************************************/
+
+typedef volatile LM_UINT8 T3_8BIT_REGISTER, *PT3_8BIT_REGISTER;
+typedef volatile LM_UINT16 T3_16BIT_REGISTER, *PT3_16BIT_REGISTER;
+typedef volatile LM_UINT32 T3_32BIT_REGISTER, *PT3_32BIT_REGISTER;
+
+typedef struct {
+ /* Big endian format. */
+ T3_32BIT_REGISTER High;
+ T3_32BIT_REGISTER Low;
+} T3_64BIT_REGISTER, *PT3_64BIT_REGISTER;
+
+typedef T3_64BIT_REGISTER T3_64BIT_HOST_ADDR, *PT3_64BIT_HOST_ADDR;
+
+#define T3_NUM_OF_DMA_DESC 256
+#define T3_NUM_OF_MBUF 768
+
+typedef struct {
+ T3_64BIT_REGISTER host_addr;
+ T3_32BIT_REGISTER nic_mbuf;
+ T3_16BIT_REGISTER len;
+ T3_16BIT_REGISTER cqid_sqid;
+ T3_32BIT_REGISTER flags;
+ T3_32BIT_REGISTER opaque1;
+ T3_32BIT_REGISTER opaque2;
+ T3_32BIT_REGISTER opaque3;
+} T3_DMA_DESC, *PT3_DMA_DESC;
+
+/******************************************************************************/
+/* Ring control block. */
+/******************************************************************************/
+
+typedef struct {
+ T3_64BIT_REGISTER HostRingAddr;
+
+ union {
+ struct {
+#ifdef BIG_ENDIAN_HOST
+ T3_16BIT_REGISTER MaxLen;
+ T3_16BIT_REGISTER Flags;
+#else /* BIG_ENDIAN_HOST */
+ T3_16BIT_REGISTER Flags;
+ T3_16BIT_REGISTER MaxLen;
+#endif
+ } s;
+
+ T3_32BIT_REGISTER MaxLen_Flags;
+ } u;
+
+ T3_32BIT_REGISTER NicRingAddr;
+} T3_RCB, *PT3_RCB;
+
+#define T3_RCB_FLAG_USE_EXT_RECV_BD BIT_0
+#define T3_RCB_FLAG_RING_DISABLED BIT_1
+
+/******************************************************************************/
+/* Status block. */
+/******************************************************************************/
+
+/*
+ * Size of status block is actually 0x50 bytes. Use 0x80 bytes for
+ * cache line alignment.
+ */
+#define T3_STATUS_BLOCK_SIZE 0x80
+
+typedef struct {
+ volatile LM_UINT32 Status;
+#define STATUS_BLOCK_UPDATED BIT_0
+#define STATUS_BLOCK_LINK_CHANGED_STATUS BIT_1
+#define STATUS_BLOCK_ERROR BIT_2
+
+ volatile LM_UINT32 StatusTag;
+
+#ifdef BIG_ENDIAN_HOST
+ volatile LM_UINT16 RcvStdConIdx;
+ volatile LM_UINT16 RcvJumboConIdx;
+
+ volatile LM_UINT16 Reserved2;
+ volatile LM_UINT16 RcvMiniConIdx;
+
+ struct {
+ volatile LM_UINT16 SendConIdx; /* Send consumer index. */
+ volatile LM_UINT16 RcvProdIdx; /* Receive producer index. */
+ } Idx[16];
+#else /* BIG_ENDIAN_HOST */
+ volatile LM_UINT16 RcvJumboConIdx;
+ volatile LM_UINT16 RcvStdConIdx;
+
+ volatile LM_UINT16 RcvMiniConIdx;
+ volatile LM_UINT16 Reserved2;
+
+ struct {
+ volatile LM_UINT16 RcvProdIdx; /* Receive producer index. */
+ volatile LM_UINT16 SendConIdx; /* Send consumer index. */
+ } Idx[16];
+#endif
+} T3_STATUS_BLOCK, *PT3_STATUS_BLOCK;
+
+/******************************************************************************/
+/* Receive buffer descriptors. */
+/******************************************************************************/
+
+typedef struct {
+ T3_64BIT_HOST_ADDR HostAddr;
+
+#ifdef BIG_ENDIAN_HOST
+ volatile LM_UINT16 Index;
+ volatile LM_UINT16 Len;
+
+ volatile LM_UINT16 Type;
+ volatile LM_UINT16 Flags;
+
+ volatile LM_UINT16 IpCksum;
+ volatile LM_UINT16 TcpUdpCksum;
+
+ volatile LM_UINT16 ErrorFlag;
+ volatile LM_UINT16 VlanTag;
+#else /* BIG_ENDIAN_HOST */
+ volatile LM_UINT16 Len;
+ volatile LM_UINT16 Index;
+
+ volatile LM_UINT16 Flags;
+ volatile LM_UINT16 Type;
+
+ volatile LM_UINT16 TcpUdpCksum;
+ volatile LM_UINT16 IpCksum;
+
+ volatile LM_UINT16 VlanTag;
+ volatile LM_UINT16 ErrorFlag;
+#endif
+
+ volatile LM_UINT32 Reserved;
+ volatile LM_UINT32 Opaque;
+} T3_RCV_BD, *PT3_RCV_BD;
+
+typedef struct {
+ T3_64BIT_HOST_ADDR HostAddr[3];
+
+#ifdef BIG_ENDIAN_HOST
+ LM_UINT16 Len1;
+ LM_UINT16 Len2;
+
+ LM_UINT16 Len3;
+ LM_UINT16 Reserved1;
+#else /* BIG_ENDIAN_HOST */
+ LM_UINT16 Len2;
+ LM_UINT16 Len1;
+
+ LM_UINT16 Reserved1;
+ LM_UINT16 Len3;
+#endif
+
+ T3_RCV_BD StdRcvBd;
+} T3_EXT_RCV_BD, *PT3_EXT_RCV_BD;
+
+/* Error flags. */
+#define RCV_BD_ERR_BAD_CRC 0x0001
+#define RCV_BD_ERR_COLL_DETECT 0x0002
+#define RCV_BD_ERR_LINK_LOST_DURING_PKT 0x0004
+#define RCV_BD_ERR_PHY_DECODE_ERR 0x0008
+#define RCV_BD_ERR_ODD_NIBBLED_RCVD_MII 0x0010
+#define RCV_BD_ERR_MAC_ABORT 0x0020
+#define RCV_BD_ERR_LEN_LT_64 0x0040
+#define RCV_BD_ERR_TRUNC_NO_RESOURCES 0x0080
+#define RCV_BD_ERR_GIANT_FRAME_RCVD 0x0100
+
+/* Buffer descriptor flags. */
+#define RCV_BD_FLAG_END 0x0004
+#define RCV_BD_FLAG_JUMBO_RING 0x0020
+#define RCV_BD_FLAG_VLAN_TAG 0x0040
+#define RCV_BD_FLAG_FRAME_HAS_ERROR 0x0400
+#define RCV_BD_FLAG_MINI_RING 0x0800
+#define RCV_BD_FLAG_IP_CHKSUM_FIELD 0x1000
+#define RCV_BD_FLAG_TCP_UDP_CHKSUM_FIELD 0x2000
+#define RCV_BD_FLAG_TCP_PACKET 0x4000
+
+/******************************************************************************/
+/* Send buffer descriptor. */
+/******************************************************************************/
+
+typedef struct {
+ T3_64BIT_HOST_ADDR HostAddr;
+
+ union {
+ struct {
+#ifdef BIG_ENDIAN_HOST
+ LM_UINT16 Len;
+ LM_UINT16 Flags;
+#else /* BIG_ENDIAN_HOST */
+ LM_UINT16 Flags;
+ LM_UINT16 Len;
+#endif
+ } s1;
+
+ LM_UINT32 Len_Flags;
+ } u1;
+
+ union {
+ struct {
+#ifdef BIG_ENDIAN_HOST
+ LM_UINT16 Reserved;
+ LM_UINT16 VlanTag;
+#else /* BIG_ENDIAN_HOST */
+ LM_UINT16 VlanTag;
+ LM_UINT16 Reserved;
+#endif
+ } s2;
+
+ LM_UINT32 VlanTag;
+ } u2;
+} T3_SND_BD, *PT3_SND_BD;
+
+/* Send buffer descriptor flags. */
+#define SND_BD_FLAG_TCP_UDP_CKSUM 0x0001
+#define SND_BD_FLAG_IP_CKSUM 0x0002
+#define SND_BD_FLAG_END 0x0004
+#define SND_BD_FLAG_IP_FRAG 0x0008
+#define SND_BD_FLAG_IP_FRAG_END 0x0010
+#define SND_BD_FLAG_VLAN_TAG 0x0040
+#define SND_BD_FLAG_COAL_NOW 0x0080
+#define SND_BD_FLAG_CPU_PRE_DMA 0x0100
+#define SND_BD_FLAG_CPU_POST_DMA 0x0200
+#define SND_BD_FLAG_INSERT_SRC_ADDR 0x1000
+#define SND_BD_FLAG_CHOOSE_SRC_ADDR 0x6000
+#define SND_BD_FLAG_DONT_GEN_CRC 0x8000
+
+/* MBUFs */
+typedef struct T3_MBUF_FRAME_DESC {
+#ifdef BIG_ENDIAN_HOST
+ LM_UINT32 status_control;
+ union {
+ struct {
+ LM_UINT8 cqid;
+ LM_UINT8 reserved1;
+ LM_UINT16 length;
+ } s1;
+ LM_UINT32 word;
+ } u1;
+ union {
+ struct {
+ LM_UINT16 ip_hdr_start;
+ LM_UINT16 tcp_udp_hdr_start;
+ } s2;
+
+ LM_UINT32 word;
+ } u2;
+
+ union {
+ struct {
+ LM_UINT16 data_start;
+ LM_UINT16 vlan_id;
+ } s3;
+
+ LM_UINT32 word;
+ } u3;
+
+ union {
+ struct {
+ LM_UINT16 ip_checksum;
+ LM_UINT16 tcp_udp_checksum;
+ } s4;
+
+ LM_UINT32 word;
+ } u4;
+
+ union {
+ struct {
+ LM_UINT16 pseudo_checksum;
+ LM_UINT16 checksum_status;
+ } s5;
+
+ LM_UINT32 word;
+ } u5;
+
+ union {
+ struct {
+ LM_UINT16 rule_match;
+ LM_UINT8 class;
+ LM_UINT8 rupt;
+ } s6;
+
+ LM_UINT32 word;
+ } u6;
+
+ union {
+ struct {
+ LM_UINT16 reserved2;
+ LM_UINT16 mbuf_num;
+ } s7;
+
+ LM_UINT32 word;
+ } u7;
+
+ LM_UINT32 reserved3;
+ LM_UINT32 reserved4;
+#else
+ LM_UINT32 status_control;
+ union {
+ struct {
+ LM_UINT16 length;
+ LM_UINT8 reserved1;
+ LM_UINT8 cqid;
+ } s1;
+ LM_UINT32 word;
+ } u1;
+ union {
+ struct {
+ LM_UINT16 tcp_udp_hdr_start;
+ LM_UINT16 ip_hdr_start;
+ } s2;
+
+ LM_UINT32 word;
+ } u2;
+
+ union {
+ struct {
+ LM_UINT16 vlan_id;
+ LM_UINT16 data_start;
+ } s3;
+
+ LM_UINT32 word;
+ } u3;
+
+ union {
+ struct {
+ LM_UINT16 tcp_udp_checksum;
+ LM_UINT16 ip_checksum;
+ } s4;
+
+ LM_UINT32 word;
+ } u4;
+
+ union {
+ struct {
+ LM_UINT16 checksum_status;
+ LM_UINT16 pseudo_checksum;
+ } s5;
+
+ LM_UINT32 word;
+ } u5;
+
+ union {
+ struct {
+ LM_UINT8 rupt;
+ LM_UINT8 class;
+ LM_UINT16 rule_match;
+ } s6;
+
+ LM_UINT32 word;
+ } u6;
+
+ union {
+ struct {
+ LM_UINT16 mbuf_num;
+ LM_UINT16 reserved2;
+ } s7;
+
+ LM_UINT32 word;
+ } u7;
+
+ LM_UINT32 reserved3;
+ LM_UINT32 reserved4;
+#endif
+} T3_MBUF_FRAME_DESC, *PT3_MBUF_FRAME_DESC;
+
+typedef struct T3_MBUF_HDR {
+ union {
+ struct {
+ unsigned int C:1;
+ unsigned int F:1;
+ unsigned int reserved1:7;
+ unsigned int next_mbuf:16;
+ unsigned int length:7;
+ } s1;
+
+ LM_UINT32 word;
+ } u1;
+
+ LM_UINT32 next_frame_ptr;
+} T3_MBUF_HDR, *PT3_MBUF_HDR;
+
+typedef struct T3_MBUF {
+ T3_MBUF_HDR hdr;
+ union {
+ struct {
+ T3_MBUF_FRAME_DESC frame_hdr;
+ LM_UINT32 data[20];
+ } s1;
+
+ struct {
+ LM_UINT32 data[30];
+ } s2;
+ } body;
+} T3_MBUF, *PT3_MBUF;
+
+#define T3_MBUF_BASE (T3_NIC_MBUF_POOL_ADDR >> 7)
+#define T3_MBUF_END ((T3_NIC_MBUF_POOL_ADDR + T3_NIC_MBUF_POOL_SIZE) >> 7)
+
+/******************************************************************************/
+/* Statistics block. */
+/******************************************************************************/
+
+typedef struct {
+ LM_UINT8 Reserved0[0x400 - 0x300];
+
+ /* Statistics maintained by Receive MAC. */
+ T3_64BIT_REGISTER ifHCInOctets;
+ T3_64BIT_REGISTER Reserved1;
+ T3_64BIT_REGISTER etherStatsFragments;
+ T3_64BIT_REGISTER ifHCInUcastPkts;
+ T3_64BIT_REGISTER ifHCInMulticastPkts;
+ T3_64BIT_REGISTER ifHCInBroadcastPkts;
+ T3_64BIT_REGISTER dot3StatsFCSErrors;
+ T3_64BIT_REGISTER dot3StatsAlignmentErrors;
+ T3_64BIT_REGISTER xonPauseFramesReceived;
+ T3_64BIT_REGISTER xoffPauseFramesReceived;
+ T3_64BIT_REGISTER macControlFramesReceived;
+ T3_64BIT_REGISTER xoffStateEntered;
+ T3_64BIT_REGISTER dot3StatsFramesTooLong;
+ T3_64BIT_REGISTER etherStatsJabbers;
+ T3_64BIT_REGISTER etherStatsUndersizePkts;
+ T3_64BIT_REGISTER inRangeLengthError;
+ T3_64BIT_REGISTER outRangeLengthError;
+ T3_64BIT_REGISTER etherStatsPkts64Octets;
+ T3_64BIT_REGISTER etherStatsPkts65Octetsto127Octets;
+ T3_64BIT_REGISTER etherStatsPkts128Octetsto255Octets;
+ T3_64BIT_REGISTER etherStatsPkts256Octetsto511Octets;
+ T3_64BIT_REGISTER etherStatsPkts512Octetsto1023Octets;
+ T3_64BIT_REGISTER etherStatsPkts1024Octetsto1522Octets;
+ T3_64BIT_REGISTER etherStatsPkts1523Octetsto2047Octets;
+ T3_64BIT_REGISTER etherStatsPkts2048Octetsto4095Octets;
+ T3_64BIT_REGISTER etherStatsPkts4096Octetsto8191Octets;
+ T3_64BIT_REGISTER etherStatsPkts8192Octetsto9022Octets;
+
+ T3_64BIT_REGISTER Unused1[37];
+
+ /* Statistics maintained by Transmit MAC. */
+ T3_64BIT_REGISTER ifHCOutOctets;
+ T3_64BIT_REGISTER Reserved2;
+ T3_64BIT_REGISTER etherStatsCollisions;
+ T3_64BIT_REGISTER outXonSent;
+ T3_64BIT_REGISTER outXoffSent;
+ T3_64BIT_REGISTER flowControlDone;
+ T3_64BIT_REGISTER dot3StatsInternalMacTransmitErrors;
+ T3_64BIT_REGISTER dot3StatsSingleCollisionFrames;
+ T3_64BIT_REGISTER dot3StatsMultipleCollisionFrames;
+ T3_64BIT_REGISTER dot3StatsDeferredTransmissions;
+ T3_64BIT_REGISTER Reserved3;
+ T3_64BIT_REGISTER dot3StatsExcessiveCollisions;
+ T3_64BIT_REGISTER dot3StatsLateCollisions;
+ T3_64BIT_REGISTER dot3Collided2Times;
+ T3_64BIT_REGISTER dot3Collided3Times;
+ T3_64BIT_REGISTER dot3Collided4Times;
+ T3_64BIT_REGISTER dot3Collided5Times;
+ T3_64BIT_REGISTER dot3Collided6Times;
+ T3_64BIT_REGISTER dot3Collided7Times;
+ T3_64BIT_REGISTER dot3Collided8Times;
+ T3_64BIT_REGISTER dot3Collided9Times;
+ T3_64BIT_REGISTER dot3Collided10Times;
+ T3_64BIT_REGISTER dot3Collided11Times;
+ T3_64BIT_REGISTER dot3Collided12Times;
+ T3_64BIT_REGISTER dot3Collided13Times;
+ T3_64BIT_REGISTER dot3Collided14Times;
+ T3_64BIT_REGISTER dot3Collided15Times;
+ T3_64BIT_REGISTER ifHCOutUcastPkts;
+ T3_64BIT_REGISTER ifHCOutMulticastPkts;
+ T3_64BIT_REGISTER ifHCOutBroadcastPkts;
+ T3_64BIT_REGISTER dot3StatsCarrierSenseErrors;
+ T3_64BIT_REGISTER ifOutDiscards;
+ T3_64BIT_REGISTER ifOutErrors;
+
+ T3_64BIT_REGISTER Unused2[31];
+
+ /* Statistics maintained by Receive List Placement. */
+ T3_64BIT_REGISTER COSIfHCInPkts[16];
+ T3_64BIT_REGISTER COSFramesDroppedDueToFilters;
+ T3_64BIT_REGISTER nicDmaWriteQueueFull;
+ T3_64BIT_REGISTER nicDmaWriteHighPriQueueFull;
+ T3_64BIT_REGISTER nicNoMoreRxBDs;
+ T3_64BIT_REGISTER ifInDiscards;
+ T3_64BIT_REGISTER ifInErrors;
+ T3_64BIT_REGISTER nicRecvThresholdHit;
+
+ T3_64BIT_REGISTER Unused3[9];
+
+ /* Statistics maintained by Send Data Initiator. */
+ T3_64BIT_REGISTER COSIfHCOutPkts[16];
+ T3_64BIT_REGISTER nicDmaReadQueueFull;
+ T3_64BIT_REGISTER nicDmaReadHighPriQueueFull;
+ T3_64BIT_REGISTER nicSendDataCompQueueFull;
+
+ /* Statistics maintained by Host Coalescing. */
+ T3_64BIT_REGISTER nicRingSetSendProdIndex;
+ T3_64BIT_REGISTER nicRingStatusUpdate;
+ T3_64BIT_REGISTER nicInterrupts;
+ T3_64BIT_REGISTER nicAvoidedInterrupts;
+ T3_64BIT_REGISTER nicSendThresholdHit;
+
+ LM_UINT8 Reserved4[0xb00 - 0x9c0];
+} T3_STATS_BLOCK, *PT3_STATS_BLOCK;
+
+/******************************************************************************/
+/* PCI configuration registers. */
+/******************************************************************************/
+
+typedef struct {
+ T3_16BIT_REGISTER VendorId;
+ T3_16BIT_REGISTER DeviceId;
+
+ T3_16BIT_REGISTER Command;
+ T3_16BIT_REGISTER Status;
+
+ T3_32BIT_REGISTER ClassCodeRevId;
+
+ T3_8BIT_REGISTER CacheLineSize;
+ T3_8BIT_REGISTER LatencyTimer;
+ T3_8BIT_REGISTER HeaderType;
+ T3_8BIT_REGISTER Bist;
+
+ T3_32BIT_REGISTER MemBaseAddrLow;
+ T3_32BIT_REGISTER MemBaseAddrHigh;
+
+ LM_UINT8 Unused1[20];
+
+ T3_16BIT_REGISTER SubsystemVendorId;
+ T3_16BIT_REGISTER SubsystemId;
+
+ T3_32BIT_REGISTER RomBaseAddr;
+
+ T3_8BIT_REGISTER PciXCapiblityPtr;
+ LM_UINT8 Unused2[7];
+
+ T3_8BIT_REGISTER IntLine;
+ T3_8BIT_REGISTER IntPin;
+ T3_8BIT_REGISTER MinGnt;
+ T3_8BIT_REGISTER MaxLat;
+
+ T3_8BIT_REGISTER PciXCapabilities;
+ T3_8BIT_REGISTER PmCapabilityPtr;
+ T3_16BIT_REGISTER PciXCommand;
+
+ T3_32BIT_REGISTER PciXStatus;
+
+ T3_8BIT_REGISTER PmCapabilityId;
+ T3_8BIT_REGISTER VpdCapabilityPtr;
+ T3_16BIT_REGISTER PmCapabilities;
+
+ T3_16BIT_REGISTER PmCtrlStatus;
+#define PM_CTRL_PME_STATUS BIT_15
+#define PM_CTRL_PME_ENABLE BIT_8
+#define PM_CTRL_PME_POWER_STATE_D0 0
+#define PM_CTRL_PME_POWER_STATE_D1 1
+#define PM_CTRL_PME_POWER_STATE_D2 2
+#define PM_CTRL_PME_POWER_STATE_D3H 3
+
+ T3_8BIT_REGISTER BridgeSupportExt;
+ T3_8BIT_REGISTER PmData;
+
+ T3_8BIT_REGISTER VpdCapabilityId;
+ T3_8BIT_REGISTER MsiCapabilityPtr;
+ T3_16BIT_REGISTER VpdAddrFlag;
+#define VPD_FLAG_WRITE (1 << 15)
+#define VPD_FLAG_RW_MASK (1 << 15)
+#define VPD_FLAG_READ 0
+
+ T3_32BIT_REGISTER VpdData;
+
+ T3_8BIT_REGISTER MsiCapabilityId;
+ T3_8BIT_REGISTER NextCapabilityPtr;
+ T3_16BIT_REGISTER MsiCtrl;
+#define MSI_CTRL_64BIT_CAP (1 << 7)
+#define MSI_CTRL_MSG_ENABLE(x) (x << 4)
+#define MSI_CTRL_MSG_CAP(x) (x << 1)
+#define MSI_CTRL_ENABLE (1 << 0)
+
+ T3_32BIT_REGISTER MsiAddrLow;
+ T3_32BIT_REGISTER MsiAddrHigh;
+
+ T3_16BIT_REGISTER MsiData;
+ T3_16BIT_REGISTER Unused3;
+
+ T3_32BIT_REGISTER MiscHostCtrl;
+#define MISC_HOST_CTRL_CLEAR_INT BIT_0
+#define MISC_HOST_CTRL_MASK_PCI_INT BIT_1
+#define MISC_HOST_CTRL_ENABLE_ENDIAN_BYTE_SWAP BIT_2
+#define MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP BIT_3
+#define MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW BIT_4
+#define MISC_HOST_CTRL_ENABLE_CLK_REG_RW BIT_5
+#define MISC_HOST_CTRL_ENABLE_REG_WORD_SWAP BIT_6
+#define MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS BIT_7
+#define MISC_HOST_CTRL_ENABLE_INT_MASK_MODE BIT_8
+#define MISC_HOST_CTRL_ENABLE_TAGGED_STATUS_MODE BIT_9
+
+ T3_32BIT_REGISTER DmaReadWriteCtrl;
+#define DMA_CTRL_WRITE_BOUNDARY_MASK (BIT_11 | BIT_12 | BIT_13)
+#define DMA_CTRL_WRITE_BOUNDARY_DISABLE 0
+#define DMA_CTRL_WRITE_BOUNDARY_16 BIT_11
+#define DMA_CTRL_WRITE_BOUNDARY_32 BIT_12
+#define DMA_CTRL_WRITE_BOUNDARY_64 (BIT_12 | BIT_11)
+#define DMA_CTRL_WRITE_BOUNDARY_128 BIT_13
+#define DMA_CTRL_WRITE_BOUNDARY_256 (BIT_13 | BIT_11)
+#define DMA_CTRL_WRITE_BOUNDARY_512 (BIT_13 | BIT_12)
+#define DMA_CTRL_WRITE_BOUNDARY_1024 (BIT_13 | BIT_12 | BIT_11)
+#define DMA_CTRL_WRITE_ONE_DMA_AT_ONCE BIT_14
+
+ T3_32BIT_REGISTER PciState;
+#define T3_PCI_STATE_FORCE_PCI_RESET BIT_0
+#define T3_PCI_STATE_INTERRUPT_NOT_ACTIVE BIT_1
+#define T3_PCI_STATE_NOT_PCI_X_BUS BIT_2
+#define T3_PCI_STATE_HIGH_BUS_SPEED BIT_3
+#define T3_PCI_STATE_32BIT_PCI_BUS BIT_4
+#define T3_PCI_STATE_PCI_ROM_ENABLE BIT_5
+#define T3_PCI_STATE_PCI_ROM_RETRY_ENABLE BIT_6
+#define T3_PCI_STATE_FLAT_VIEW BIT_8
+#define T3_PCI_STATE_RETRY_SAME_DMA BIT_13
+
+ T3_32BIT_REGISTER ClockCtrl;
+#define T3_PCI_CLKCTRL_TXCPU_CLK_DISABLE BIT_11
+#define T3_PCI_CLKCTRL_RXCPU_CLK_DISABLE BIT_10
+#define T3_PCI_CLKCTRL_CORE_CLK_DISABLE BIT_9
+
+ T3_32BIT_REGISTER RegBaseAddr;
+
+ T3_32BIT_REGISTER MemWindowBaseAddr;
+
+#ifdef NIC_CPU_VIEW
+ /* These registers are ONLY visible to NIC CPU */
+ T3_32BIT_REGISTER PowerConsumed;
+ T3_32BIT_REGISTER PowerDissipated;
+#else /* NIC_CPU_VIEW */
+ T3_32BIT_REGISTER RegData;
+ T3_32BIT_REGISTER MemWindowData;
+#endif /* !NIC_CPU_VIEW */
+
+ T3_32BIT_REGISTER ModeCtrl;
+
+ T3_32BIT_REGISTER MiscCfg;
+
+ T3_32BIT_REGISTER MiscLocalCtrl;
+
+ T3_32BIT_REGISTER Unused4;
+
+ /* NOTE: Big/Little-endian clarification needed. Are these register */
+ /* in big or little endian formate. */
+ T3_64BIT_REGISTER StdRingProdIdx;
+ T3_64BIT_REGISTER RcvRetRingConIdx;
+ T3_64BIT_REGISTER SndProdIdx;
+
+ LM_UINT8 Unused5[80];
+} T3_PCI_CONFIGURATION, *PT3_PCI_CONFIGURATION;
+
+#define PCIX_CMD_MAX_SPLIT_MASK 0x0070
+#define PCIX_CMD_MAX_SPLIT_SHL 4
+#define PCIX_CMD_MAX_BURST_MASK 0x000c
+#define PCIX_CMD_MAX_BURST_SHL 2
+#define PCIX_CMD_MAX_BURST_CPIOB 2
+
+/******************************************************************************/
+/* Mac control registers. */
+/******************************************************************************/
+
+typedef struct {
+ /* MAC mode control. */
+ T3_32BIT_REGISTER Mode;
+#define MAC_MODE_GLOBAL_RESET BIT_0
+#define MAC_MODE_HALF_DUPLEX BIT_1
+#define MAC_MODE_PORT_MODE_MASK (BIT_2 | BIT_3)
+#define MAC_MODE_PORT_MODE_TBI (BIT_2 | BIT_3)
+#define MAC_MODE_PORT_MODE_GMII BIT_3
+#define MAC_MODE_PORT_MODE_MII BIT_2
+#define MAC_MODE_PORT_MODE_NONE BIT_NONE
+#define MAC_MODE_PORT_INTERNAL_LOOPBACK BIT_4
+#define MAC_MODE_TAGGED_MAC_CONTROL BIT_7
+#define MAC_MODE_TX_BURSTING BIT_8
+#define MAC_MODE_MAX_DEFER BIT_9
+#define MAC_MODE_LINK_POLARITY BIT_10
+#define MAC_MODE_ENABLE_RX_STATISTICS BIT_11
+#define MAC_MODE_CLEAR_RX_STATISTICS BIT_12
+#define MAC_MODE_FLUSH_RX_STATISTICS BIT_13
+#define MAC_MODE_ENABLE_TX_STATISTICS BIT_14
+#define MAC_MODE_CLEAR_TX_STATISTICS BIT_15
+#define MAC_MODE_FLUSH_TX_STATISTICS BIT_16
+#define MAC_MODE_SEND_CONFIGS BIT_17
+#define MAC_MODE_DETECT_MAGIC_PACKET_ENABLE BIT_18
+#define MAC_MODE_ACPI_POWER_ON_ENABLE BIT_19
+#define MAC_MODE_ENABLE_MIP BIT_20
+#define MAC_MODE_ENABLE_TDE BIT_21
+#define MAC_MODE_ENABLE_RDE BIT_22
+#define MAC_MODE_ENABLE_FHDE BIT_23
+
+ /* MAC status */
+ T3_32BIT_REGISTER Status;
+#define MAC_STATUS_PCS_SYNCED BIT_0
+#define MAC_STATUS_SIGNAL_DETECTED BIT_1
+#define MAC_STATUS_RECEIVING_CFG BIT_2
+#define MAC_STATUS_CFG_CHANGED BIT_3
+#define MAC_STATUS_SYNC_CHANGED BIT_4
+#define MAC_STATUS_PORT_DECODE_ERROR BIT_10
+#define MAC_STATUS_LINK_STATE_CHANGED BIT_12
+#define MAC_STATUS_MI_COMPLETION BIT_22
+#define MAC_STATUS_MI_INTERRUPT BIT_23
+#define MAC_STATUS_AP_ERROR BIT_24
+#define MAC_STATUS_ODI_ERROR BIT_25
+#define MAC_STATUS_RX_STATS_OVERRUN BIT_26
+#define MAC_STATUS_TX_STATS_OVERRUN BIT_27
+
+ /* Event Enable */
+ T3_32BIT_REGISTER MacEvent;
+#define MAC_EVENT_ENABLE_PORT_DECODE_ERR BIT_10
+#define MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN BIT_12
+#define MAC_EVENT_ENABLE_MI_COMPLETION BIT_22
+#define MAC_EVENT_ENABLE_MI_INTERRUPT BIT_23
+#define MAC_EVENT_ENABLE_AP_ERROR BIT_24
+#define MAC_EVENT_ENABLE_ODI_ERROR BIT_25
+#define MAC_EVENT_ENABLE_RX_STATS_OVERRUN BIT_26
+#define MAC_EVENT_ENABLE_TX_STATS_OVERRUN BIT_27
+
+ /* Led control. */
+ T3_32BIT_REGISTER LedCtrl;
+#define LED_CTRL_OVERRIDE_LINK_LED BIT_0
+#define LED_CTRL_1000MBPS_LED_ON BIT_1
+#define LED_CTRL_100MBPS_LED_ON BIT_2
+#define LED_CTRL_10MBPS_LED_ON BIT_3
+#define LED_CTRL_OVERRIDE_TRAFFIC_LED BIT_4
+#define LED_CTRL_BLINK_TRAFFIC_LED BIT_5
+#define LED_CTRL_TRAFFIC_LED BIT_6
+#define LED_CTRL_1000MBPS_LED_STATUS BIT_7
+#define LED_CTRL_100MBPS_LED_STATUS BIT_8
+#define LED_CTRL_10MBPS_LED_STATUS BIT_9
+#define LED_CTRL_TRAFFIC_LED_STATUS BIT_10
+#define LED_CTRL_MAC_MODE BIT_NONE
+#define LED_CTRL_PHY_MODE_1 BIT_11
+#define LED_CTRL_PHY_MODE_2 BIT_12
+#define LED_CTRL_BLINK_RATE_MASK 0x7ff80000
+#define LED_CTRL_OVERRIDE_BLINK_PERIOD BIT_19
+#define LED_CTRL_OVERRIDE_BLINK_RATE BIT_31
+
+ /* MAC addresses. */
+ struct {
+ T3_32BIT_REGISTER High; /* Upper 2 bytes. */
+ T3_32BIT_REGISTER Low; /* Lower 4 bytes. */
+ } MacAddr[4];
+
+ /* ACPI Mbuf pointer. */
+ T3_32BIT_REGISTER AcpiMbufPtr;
+
+ /* ACPI Length and Offset. */
+ T3_32BIT_REGISTER AcpiLengthOffset;
+#define ACPI_LENGTH_MASK 0xffff
+#define ACPI_OFFSET_MASK 0x0fff0000
+#define ACPI_LENGTH(x) x
+#define ACPI_OFFSET(x) ((x) << 16)
+
+ /* Transmit random backoff. */
+ T3_32BIT_REGISTER TxBackoffSeed;
+#define MAC_TX_BACKOFF_SEED_MASK 0x3ff
+
+ /* Receive MTU */
+ T3_32BIT_REGISTER MtuSize;
+#define MAC_RX_MTU_MASK 0xffff
+
+ /* Gigabit PCS Test. */
+ T3_32BIT_REGISTER PcsTest;
+#define MAC_PCS_TEST_DATA_PATTERN_MASK 0x0fffff
+#define MAC_PCS_TEST_ENABLE BIT_20
+
+ /* Transmit Gigabit Auto-Negotiation. */
+ T3_32BIT_REGISTER TxAutoNeg;
+#define MAC_AN_TX_AN_DATA_MASK 0xffff
+
+ /* Receive Gigabit Auto-Negotiation. */
+ T3_32BIT_REGISTER RxAutoNeg;
+#define MAC_AN_RX_AN_DATA_MASK 0xffff
+
+ /* MI Communication. */
+ T3_32BIT_REGISTER MiCom;
+#define MI_COM_CMD_MASK (BIT_26 | BIT_27)
+#define MI_COM_CMD_WRITE BIT_26
+#define MI_COM_CMD_READ BIT_27
+#define MI_COM_READ_FAILED BIT_28
+#define MI_COM_START BIT_29
+#define MI_COM_BUSY BIT_29
+
+#define MI_COM_PHY_ADDR_MASK 0x1f
+#define MI_COM_FIRST_PHY_ADDR_BIT 21
+
+#define MI_COM_PHY_REG_ADDR_MASK 0x1f
+#define MI_COM_FIRST_PHY_REG_ADDR_BIT 16
+
+#define MI_COM_PHY_DATA_MASK 0xffff
+
+ /* MI Status. */
+ T3_32BIT_REGISTER MiStatus;
+#define MI_STATUS_ENABLE_LINK_STATUS_ATTN BIT_0
+
+ /* MI Mode. */
+ T3_32BIT_REGISTER MiMode;
+#define MI_MODE_CLOCK_SPEED_10MHZ BIT_0
+#define MI_MODE_USE_SHORT_PREAMBLE BIT_1
+#define MI_MODE_AUTO_POLLING_ENABLE BIT_4
+#define MI_MODE_CORE_CLOCK_SPEED_62MHZ BIT_15
+
+ /* Auto-polling status. */
+ T3_32BIT_REGISTER AutoPollStatus;
+#define AUTO_POLL_ERROR BIT_0
+
+ /* Transmit MAC mode. */
+ T3_32BIT_REGISTER TxMode;
+#define TX_MODE_RESET BIT_0
+#define TX_MODE_ENABLE BIT_1
+#define TX_MODE_ENABLE_FLOW_CONTROL BIT_4
+#define TX_MODE_ENABLE_BIG_BACKOFF BIT_5
+#define TX_MODE_ENABLE_LONG_PAUSE BIT_6
+
+ /* Transmit MAC status. */
+ T3_32BIT_REGISTER TxStatus;
+#define TX_STATUS_RX_CURRENTLY_XOFFED BIT_0
+#define TX_STATUS_SENT_XOFF BIT_1
+#define TX_STATUS_SENT_XON BIT_2
+#define TX_STATUS_LINK_UP BIT_3
+#define TX_STATUS_ODI_UNDERRUN BIT_4
+#define TX_STATUS_ODI_OVERRUN BIT_5
+
+ /* Transmit MAC length. */
+ T3_32BIT_REGISTER TxLengths;
+#define TX_LEN_SLOT_TIME_MASK 0xff
+#define TX_LEN_IPG_MASK 0x0f00
+#define TX_LEN_IPG_CRS_MASK (BIT_12 | BIT_13)
+
+ /* Receive MAC mode. */
+ T3_32BIT_REGISTER RxMode;
+#define RX_MODE_RESET BIT_0
+#define RX_MODE_ENABLE BIT_1
+#define RX_MODE_ENABLE_FLOW_CONTROL BIT_2
+#define RX_MODE_KEEP_MAC_CONTROL BIT_3
+#define RX_MODE_KEEP_PAUSE BIT_4
+#define RX_MODE_ACCEPT_OVERSIZED BIT_5
+#define RX_MODE_ACCEPT_RUNTS BIT_6
+#define RX_MODE_LENGTH_CHECK BIT_7
+#define RX_MODE_PROMISCUOUS_MODE BIT_8
+#define RX_MODE_NO_CRC_CHECK BIT_9
+#define RX_MODE_KEEP_VLAN_TAG BIT_10
+
+ /* Receive MAC status. */
+ T3_32BIT_REGISTER RxStatus;
+#define RX_STATUS_REMOTE_TRANSMITTER_XOFFED BIT_0
+#define RX_STATUS_XOFF_RECEIVED BIT_1
+#define RX_STATUS_XON_RECEIVED BIT_2
+
+ /* Hash registers. */
+ T3_32BIT_REGISTER HashReg[4];
+
+ /* Receive placement rules registers. */
+ struct {
+ T3_32BIT_REGISTER Rule;
+ T3_32BIT_REGISTER Value;
+ } RcvRules[16];
+
+#define RCV_DISABLE_RULE_MASK 0x7fffffff
+
+#define RCV_RULE1_REJECT_BROADCAST_IDX 0x00
+#define REJECT_BROADCAST_RULE1_RULE 0xc2000000
+#define REJECT_BROADCAST_RULE1_VALUE 0xffffffff
+
+#define RCV_RULE2_REJECT_BROADCAST_IDX 0x01
+#define REJECT_BROADCAST_RULE2_RULE 0x86000004
+#define REJECT_BROADCAST_RULE2_VALUE 0xffffffff
+
+#if INCLUDE_5701_AX_FIX
+#define RCV_LAST_RULE_IDX 0x04
+#else
+#define RCV_LAST_RULE_IDX 0x02
+#endif
+
+ T3_32BIT_REGISTER RcvRuleCfg;
+#define RX_RULE_DEFAULT_CLASS (1 << 3)
+
+ LM_UINT8 Reserved1[140];
+
+ T3_32BIT_REGISTER SerdesCfg;
+ T3_32BIT_REGISTER SerdesStatus;
+
+ LM_UINT8 Reserved2[104];
+
+ volatile LM_UINT8 TxMacState[16];
+ volatile LM_UINT8 RxMacState[20];
+
+ LM_UINT8 Reserved3[476];
+
+ T3_32BIT_REGISTER RxStats[26];
+
+ LM_UINT8 Reserved4[24];
+
+ T3_32BIT_REGISTER TxStats[28];
+
+ LM_UINT8 Reserved5[784];
+} T3_MAC_CONTROL, *PT3_MAC_CONTROL;
+
+/******************************************************************************/
+/* Send data initiator control registers. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define T3_SND_DATA_IN_MODE_RESET BIT_0
+#define T3_SND_DATA_IN_MODE_ENABLE BIT_1
+#define T3_SND_DATA_IN_MODE_STATS_OFLW_ATTN_ENABLE BIT_2
+
+ T3_32BIT_REGISTER Status;
+#define T3_SND_DATA_IN_STATUS_STATS_OFLW_ATTN BIT_2
+
+ T3_32BIT_REGISTER StatsCtrl;
+#define T3_SND_DATA_IN_STATS_CTRL_ENABLE BIT_0
+#define T3_SND_DATA_IN_STATS_CTRL_FASTER_UPDATE BIT_1
+#define T3_SND_DATA_IN_STATS_CTRL_CLEAR BIT_2
+#define T3_SND_DATA_IN_STATS_CTRL_FLUSH BIT_3
+#define T3_SND_DATA_IN_STATS_CTRL_FORCE_ZERO BIT_4
+
+ T3_32BIT_REGISTER StatsEnableMask;
+ T3_32BIT_REGISTER StatsIncMask;
+
+ LM_UINT8 Reserved[108];
+
+ T3_32BIT_REGISTER ClassOfServCnt[16];
+ T3_32BIT_REGISTER DmaReadQFullCnt;
+ T3_32BIT_REGISTER DmaPriorityReadQFullCnt;
+ T3_32BIT_REGISTER SdcQFullCnt;
+
+ T3_32BIT_REGISTER NicRingSetSendProdIdxCnt;
+ T3_32BIT_REGISTER StatusUpdatedCnt;
+ T3_32BIT_REGISTER InterruptsCnt;
+ T3_32BIT_REGISTER AvoidInterruptsCnt;
+ T3_32BIT_REGISTER SendThresholdHitCnt;
+
+ /* Unused space. */
+ LM_UINT8 Unused[800];
+} T3_SEND_DATA_INITIATOR, *PT3_SEND_DATA_INITIATOR;
+
+/******************************************************************************/
+/* Send data completion control registers. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define SND_DATA_COMP_MODE_RESET BIT_0
+#define SND_DATA_COMP_MODE_ENABLE BIT_1
+
+ /* Unused space. */
+ LM_UINT8 Unused[1020];
+} T3_SEND_DATA_COMPLETION, *PT3_SEND_DATA_COMPLETION;
+
+/******************************************************************************/
+/* Send BD Ring Selector Control Registers. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define SND_BD_SEL_MODE_RESET BIT_0
+#define SND_BD_SEL_MODE_ENABLE BIT_1
+#define SND_BD_SEL_MODE_ATTN_ENABLE BIT_2
+
+ T3_32BIT_REGISTER Status;
+#define SND_BD_SEL_STATUS_ERROR_ATTN BIT_2
+
+ T3_32BIT_REGISTER HwDiag;
+
+ /* Unused space. */
+ LM_UINT8 Unused1[52];
+
+ /* Send BD Ring Selector Local NIC Send BD Consumer Index. */
+ T3_32BIT_REGISTER NicSendBdSelConIdx[16];
+
+ /* Unused space. */
+ LM_UINT8 Unused2[896];
+} T3_SEND_BD_SELECTOR, *PT3_SEND_BD_SELECTOR;
+
+/******************************************************************************/
+/* Send BD initiator control registers. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define SND_BD_IN_MODE_RESET BIT_0
+#define SND_BD_IN_MODE_ENABLE BIT_1
+#define SND_BD_IN_MODE_ATTN_ENABLE BIT_2
+
+ T3_32BIT_REGISTER Status;
+#define SND_BD_IN_STATUS_ERROR_ATTN BIT_2
+
+ /* Send BD initiator local NIC send BD producer index. */
+ T3_32BIT_REGISTER NicSendBdInProdIdx[16];
+
+ /* Unused space. */
+ LM_UINT8 Unused2[952];
+} T3_SEND_BD_INITIATOR, *PT3_SEND_BD_INITIATOR;
+
+/******************************************************************************/
+/* Send BD Completion Control. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define SND_BD_COMP_MODE_RESET BIT_0
+#define SND_BD_COMP_MODE_ENABLE BIT_1
+#define SND_BD_COMP_MODE_ATTN_ENABLE BIT_2
+
+ /* Unused space. */
+ LM_UINT8 Unused2[1020];
+} T3_SEND_BD_COMPLETION, *PT3_SEND_BD_COMPLETION;
+
+/******************************************************************************/
+/* Receive list placement control registers. */
+/******************************************************************************/
+
+typedef struct {
+ /* Mode. */
+ T3_32BIT_REGISTER Mode;
+#define RCV_LIST_PLMT_MODE_RESET BIT_0
+#define RCV_LIST_PLMT_MODE_ENABLE BIT_1
+#define RCV_LIST_PLMT_MODE_CLASS0_ATTN_ENABLE BIT_2
+#define RCV_LIST_PLMT_MODE_MAPPING_OOR_ATTN_ENABLE BIT_3
+#define RCV_LIST_PLMT_MODE_STATS_OFLOW_ATTN_ENABLE BIT_4
+
+ /* Status. */
+ T3_32BIT_REGISTER Status;
+#define RCV_LIST_PLMT_STATUS_CLASS0_ATTN BIT_2
+#define RCV_LIST_PLMT_STATUS_MAPPING_ATTN BIT_3
+#define RCV_LIST_PLMT_STATUS_STATS_OFLOW_ATTN BIT_4
+
+ /* Receive selector list lock register. */
+ T3_32BIT_REGISTER Lock;
+#define RCV_LIST_SEL_LOCK_REQUEST_MASK 0xffff
+#define RCV_LIST_SEL_LOCK_GRANT_MASK 0xffff0000
+
+ /* Selector non-empty bits. */
+ T3_32BIT_REGISTER NonEmptyBits;
+#define RCV_LIST_SEL_NON_EMPTY_MASK 0xffff
+
+ /* Receive list placement configuration register. */
+ T3_32BIT_REGISTER Config;
+
+ /* Receive List Placement statistics Control. */
+ T3_32BIT_REGISTER StatsCtrl;
+#define RCV_LIST_STATS_ENABLE BIT_0
+#define RCV_LIST_STATS_FAST_UPDATE BIT_1
+
+ /* Receive List Placement statistics Enable Mask. */
+ T3_32BIT_REGISTER StatsEnableMask;
+
+ /* Receive List Placement statistics Increment Mask. */
+ T3_32BIT_REGISTER StatsIncMask;
+
+ /* Unused space. */
+ LM_UINT8 Unused1[224];
+
+ struct {
+ T3_32BIT_REGISTER Head;
+ T3_32BIT_REGISTER Tail;
+ T3_32BIT_REGISTER Count;
+
+ /* Unused space. */
+ LM_UINT8 Unused[4];
+ } RcvSelectorList[16];
+
+ /* Local statistics counter. */
+ T3_32BIT_REGISTER ClassOfServCnt[16];
+
+ T3_32BIT_REGISTER DropDueToFilterCnt;
+ T3_32BIT_REGISTER DmaWriteQFullCnt;
+ T3_32BIT_REGISTER DmaHighPriorityWriteQFullCnt;
+ T3_32BIT_REGISTER NoMoreReceiveBdCnt;
+ T3_32BIT_REGISTER IfInDiscardsCnt;
+ T3_32BIT_REGISTER IfInErrorsCnt;
+ T3_32BIT_REGISTER RcvThresholdHitCnt;
+
+ /* Another unused space. */
+ LM_UINT8 Unused2[420];
+} T3_RCV_LIST_PLACEMENT, *PT3_RCV_LIST_PLACEMENT;
+
+/******************************************************************************/
+/* Receive Data and Receive BD Initiator Control. */
+/******************************************************************************/
+
+typedef struct {
+ /* Mode. */
+ T3_32BIT_REGISTER Mode;
+#define RCV_DATA_BD_IN_MODE_RESET BIT_0
+#define RCV_DATA_BD_IN_MODE_ENABLE BIT_1
+#define RCV_DATA_BD_IN_MODE_JUMBO_BD_NEEDED BIT_2
+#define RCV_DATA_BD_IN_MODE_FRAME_TOO_BIG BIT_3
+#define RCV_DATA_BD_IN_MODE_INVALID_RING_SIZE BIT_4
+
+ /* Status. */
+ T3_32BIT_REGISTER Status;
+#define RCV_DATA_BD_IN_STATUS_JUMBO_BD_NEEDED BIT_2
+#define RCV_DATA_BD_IN_STATUS_FRAME_TOO_BIG BIT_3
+#define RCV_DATA_BD_IN_STATUS_INVALID_RING_SIZE BIT_4
+
+ /* Split frame minium size. */
+ T3_32BIT_REGISTER SplitFrameMinSize;
+
+ /* Unused space. */
+ LM_UINT8 Unused1[0x2440 - 0x240c];
+
+ /* Receive RCBs. */
+ T3_RCB JumboRcvRcb;
+ T3_RCB StdRcvRcb;
+ T3_RCB MiniRcvRcb;
+
+ /* Receive Data and Receive BD Ring Initiator Local NIC Receive */
+ /* BD Consumber Index. */
+ T3_32BIT_REGISTER NicJumboConIdx;
+ T3_32BIT_REGISTER NicStdConIdx;
+ T3_32BIT_REGISTER NicMiniConIdx;
+
+ /* Unused space. */
+ LM_UINT8 Unused2[4];
+
+ /* Receive Data and Receive BD Initiator Local Receive Return ProdIdx. */
+ T3_32BIT_REGISTER RcvDataBdProdIdx[16];
+
+ /* Receive Data and Receive BD Initiator Hardware Diagnostic. */
+ T3_32BIT_REGISTER HwDiag;
+
+ /* Unused space. */
+ LM_UINT8 Unused3[828];
+} T3_RCV_DATA_BD_INITIATOR, *PT3_RCV_DATA_BD_INITIATOR;
+
+/******************************************************************************/
+/* Receive Data Completion Control Registes. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define RCV_DATA_COMP_MODE_RESET BIT_0
+#define RCV_DATA_COMP_MODE_ENABLE BIT_1
+#define RCV_DATA_COMP_MODE_ATTN_ENABLE BIT_2
+
+ /* Unused spaced. */
+ LM_UINT8 Unused[1020];
+} T3_RCV_DATA_COMPLETION, *PT3_RCV_DATA_COMPLETION;
+
+/******************************************************************************/
+/* Receive BD Initiator Control. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define RCV_BD_IN_MODE_RESET BIT_0
+#define RCV_BD_IN_MODE_ENABLE BIT_1
+#define RCV_BD_IN_MODE_BD_IN_DIABLED_RCB_ATTN_ENABLE BIT_2
+
+ T3_32BIT_REGISTER Status;
+#define RCV_BD_IN_STATUS_BD_IN_DIABLED_RCB_ATTN BIT_2
+
+ T3_32BIT_REGISTER NicJumboRcvProdIdx;
+ T3_32BIT_REGISTER NicStdRcvProdIdx;
+ T3_32BIT_REGISTER NicMiniRcvProdIdx;
+
+ T3_32BIT_REGISTER MiniRcvThreshold;
+ T3_32BIT_REGISTER StdRcvThreshold;
+ T3_32BIT_REGISTER JumboRcvThreshold;
+
+ /* Unused space. */
+ LM_UINT8 Unused[992];
+} T3_RCV_BD_INITIATOR, *PT3_RCV_BD_INITIATOR;
+
+/******************************************************************************/
+/* Receive BD Completion Control Registers. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define RCV_BD_COMP_MODE_RESET BIT_0
+#define RCV_BD_COMP_MODE_ENABLE BIT_1
+#define RCV_BD_COMP_MODE_ATTN_ENABLE BIT_2
+
+ T3_32BIT_REGISTER Status;
+#define RCV_BD_COMP_STATUS_ERROR_ATTN BIT_2
+
+ T3_32BIT_REGISTER NicJumboRcvBdProdIdx;
+ T3_32BIT_REGISTER NicStdRcvBdProdIdx;
+ T3_32BIT_REGISTER NicMiniRcvBdProdIdx;
+
+ /* Unused space. */
+ LM_UINT8 Unused[1004];
+} T3_RCV_BD_COMPLETION, *PT3_RCV_BD_COMPLETION;
+
+/******************************************************************************/
+/* Receive list selector control register. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define RCV_LIST_SEL_MODE_RESET BIT_0
+#define RCV_LIST_SEL_MODE_ENABLE BIT_1
+#define RCV_LIST_SEL_MODE_ATTN_ENABLE BIT_2
+
+ T3_32BIT_REGISTER Status;
+#define RCV_LIST_SEL_STATUS_ERROR_ATTN BIT_2
+
+ /* Unused space. */
+ LM_UINT8 Unused[1016];
+} T3_RCV_LIST_SELECTOR, *PT3_RCV_LIST_SELECTOR;
+
+/******************************************************************************/
+/* Mbuf cluster free registers. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define MBUF_CLUSTER_FREE_MODE_RESET BIT_0
+#define MBUF_CLUSTER_FREE_MODE_ENABLE BIT_1
+
+ T3_32BIT_REGISTER Status;
+
+ /* Unused space. */
+ LM_UINT8 Unused[1016];
+} T3_MBUF_CLUSTER_FREE, *PT3_MBUF_CLUSTER_FREE;
+
+/******************************************************************************/
+/* Host coalescing control registers. */
+/******************************************************************************/
+
+typedef struct {
+ /* Mode. */
+ T3_32BIT_REGISTER Mode;
+#define HOST_COALESCE_RESET BIT_0
+#define HOST_COALESCE_ENABLE BIT_1
+#define HOST_COALESCE_ATTN BIT_2
+#define HOST_COALESCE_NOW BIT_3
+#define HOST_COALESCE_FULL_STATUS_MODE BIT_NONE
+#define HOST_COALESCE_64_BYTE_STATUS_MODE BIT_7
+#define HOST_COALESCE_32_BYTE_STATUS_MODE BIT_8
+#define HOST_COALESCE_CLEAR_TICKS_ON_RX_BD_EVENT BIT_9
+#define HOST_COALESCE_CLEAR_TICKS_ON_TX_BD_EVENT BIT_10
+#define HOST_COALESCE_NO_INT_ON_COALESCE_NOW_MODE BIT_11
+#define HOST_COALESCE_NO_INT_ON_FORCE_DMAD_MODE BIT_12
+
+ /* Status. */
+ T3_32BIT_REGISTER Status;
+#define HOST_COALESCE_ERROR_ATTN BIT_2
+
+ /* Receive coalescing ticks. */
+ T3_32BIT_REGISTER RxCoalescingTicks;
+
+ /* Send coalescing ticks. */
+ T3_32BIT_REGISTER TxCoalescingTicks;
+
+ /* Receive max coalesced frames. */
+ T3_32BIT_REGISTER RxMaxCoalescedFrames;
+
+ /* Send max coalesced frames. */
+ T3_32BIT_REGISTER TxMaxCoalescedFrames;
+
+ /* Receive coalescing ticks during interrupt. */
+ T3_32BIT_REGISTER RxCoalescedTickDuringInt;
+
+ /* Send coalescing ticks during interrupt. */
+ T3_32BIT_REGISTER TxCoalescedTickDuringInt;
+
+ /* Receive max coalesced frames during interrupt. */
+ T3_32BIT_REGISTER RxMaxCoalescedFramesDuringInt;
+
+ /* Send max coalesced frames during interrupt. */
+ T3_32BIT_REGISTER TxMaxCoalescedFramesDuringInt;
+
+ /* Statistics tick. */
+ T3_32BIT_REGISTER StatsCoalescingTicks;
+
+ /* Unused space. */
+ LM_UINT8 Unused2[4];
+
+ /* Statistics host address. */
+ T3_64BIT_REGISTER StatsBlkHostAddr;
+
+ /* Status block host address. */
+ T3_64BIT_REGISTER StatusBlkHostAddr;
+
+ /* Statistics NIC address. */
+ T3_32BIT_REGISTER StatsBlkNicAddr;
+
+ /* Statust block NIC address. */
+ T3_32BIT_REGISTER StatusBlkNicAddr;
+
+ /* Flow attention registers. */
+ T3_32BIT_REGISTER FlowAttn;
+
+ /* Unused space. */
+ LM_UINT8 Unused3[4];
+
+ T3_32BIT_REGISTER NicJumboRcvBdConIdx;
+ T3_32BIT_REGISTER NicStdRcvBdConIdx;
+ T3_32BIT_REGISTER NicMiniRcvBdConIdx;
+
+ /* Unused space. */
+ LM_UINT8 Unused4[36];
+
+ T3_32BIT_REGISTER NicRetProdIdx[16];
+ T3_32BIT_REGISTER NicSndBdConIdx[16];
+
+ /* Unused space. */
+ LM_UINT8 Unused5[768];
+} T3_HOST_COALESCING, *PT3_HOST_COALESCING;
+
+/******************************************************************************/
+/* Memory arbiter registers. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define T3_MEM_ARBITER_MODE_RESET BIT_0
+#define T3_MEM_ARBITER_MODE_ENABLE BIT_1
+
+ T3_32BIT_REGISTER Status;
+
+ T3_32BIT_REGISTER ArbTrapAddrLow;
+ T3_32BIT_REGISTER ArbTrapAddrHigh;
+
+ /* Unused space. */
+ LM_UINT8 Unused[1008];
+} T3_MEM_ARBITER, *PT3_MEM_ARBITER;
+
+/******************************************************************************/
+/* Buffer manager control register. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define BUFMGR_MODE_RESET BIT_0
+#define BUFMGR_MODE_ENABLE BIT_1
+#define BUFMGR_MODE_ATTN_ENABLE BIT_2
+#define BUFMGR_MODE_BM_TEST BIT_3
+#define BUFMGR_MODE_MBUF_LOW_ATTN_ENABLE BIT_4
+
+ T3_32BIT_REGISTER Status;
+#define BUFMGR_STATUS_ERROR BIT_2
+#define BUFMGR_STATUS_MBUF_LOW BIT_4
+
+ T3_32BIT_REGISTER MbufPoolAddr;
+ T3_32BIT_REGISTER MbufPoolSize;
+ T3_32BIT_REGISTER MbufReadDmaLowWaterMark;
+ T3_32BIT_REGISTER MbufMacRxLowWaterMark;
+ T3_32BIT_REGISTER MbufHighWaterMark;
+
+ T3_32BIT_REGISTER RxCpuMbufAllocReq;
+#define BUFMGR_MBUF_ALLOC_BIT BIT_31
+ T3_32BIT_REGISTER RxCpuMbufAllocResp;
+ T3_32BIT_REGISTER TxCpuMbufAllocReq;
+ T3_32BIT_REGISTER TxCpuMbufAllocResp;
+
+ T3_32BIT_REGISTER DmaDescPoolAddr;
+ T3_32BIT_REGISTER DmaDescPoolSize;
+ T3_32BIT_REGISTER DmaLowWaterMark;
+ T3_32BIT_REGISTER DmaHighWaterMark;
+
+ T3_32BIT_REGISTER RxCpuDmaAllocReq;
+ T3_32BIT_REGISTER RxCpuDmaAllocResp;
+ T3_32BIT_REGISTER TxCpuDmaAllocReq;
+ T3_32BIT_REGISTER TxCpuDmaAllocResp;
+
+ T3_32BIT_REGISTER Hwdiag[3];
+
+ /* Unused space. */
+ LM_UINT8 Unused[936];
+} T3_BUFFER_MANAGER, *PT3_BUFFER_MANAGER;
+
+/******************************************************************************/
+/* Read DMA control registers. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define DMA_READ_MODE_RESET BIT_0
+#define DMA_READ_MODE_ENABLE BIT_1
+#define DMA_READ_MODE_TARGET_ABORT_ATTN_ENABLE BIT_2
+#define DMA_READ_MODE_MASTER_ABORT_ATTN_ENABLE BIT_3
+#define DMA_READ_MODE_PARITY_ERROR_ATTN_ENABLE BIT_4
+#define DMA_READ_MODE_ADDR_OVERFLOW_ATTN_ENABLE BIT_5
+#define DMA_READ_MODE_FIFO_OVERRUN_ATTN_ENABLE BIT_6
+#define DMA_READ_MODE_FIFO_UNDERRUN_ATTN_ENABLE BIT_7
+#define DMA_READ_MODE_FIFO_OVERREAD_ATTN_ENABLE BIT_8
+#define DMA_READ_MODE_LONG_READ_ATTN_ENABLE BIT_9
+#define DMA_READ_MODE_SPLIT_ENABLE BIT_11
+#define DMA_READ_MODE_SPLIT_RESET BIT_12
+
+ T3_32BIT_REGISTER Status;
+#define DMA_READ_STATUS_TARGET_ABORT_ATTN BIT_2
+#define DMA_READ_STATUS_MASTER_ABORT_ATTN BIT_3
+#define DMA_READ_STATUS_PARITY_ERROR_ATTN BIT_4
+#define DMA_READ_STATUS_ADDR_OVERFLOW_ATTN BIT_5
+#define DMA_READ_STATUS_FIFO_OVERRUN_ATTN BIT_6
+#define DMA_READ_STATUS_FIFO_UNDERRUN_ATTN BIT_7
+#define DMA_READ_STATUS_FIFO_OVERREAD_ATTN BIT_8
+#define DMA_READ_STATUS_LONG_READ_ATTN BIT_9
+
+ /* Unused space. */
+ LM_UINT8 Unused[1016];
+} T3_DMA_READ, *PT3_DMA_READ;
+
+typedef union T3_CPU {
+ struct {
+ T3_32BIT_REGISTER mode;
+#define CPU_MODE_HALT BIT_10
+#define CPU_MODE_RESET BIT_0
+ T3_32BIT_REGISTER state;
+ T3_32BIT_REGISTER EventMask;
+ T3_32BIT_REGISTER reserved1[4];
+ T3_32BIT_REGISTER PC;
+ T3_32BIT_REGISTER Instruction;
+ T3_32BIT_REGISTER SpadUnderflow;
+ T3_32BIT_REGISTER WatchdogClear;
+ T3_32BIT_REGISTER WatchdogVector;
+ T3_32BIT_REGISTER WatchdogSavedPC;
+ T3_32BIT_REGISTER HardwareBp;
+ T3_32BIT_REGISTER reserved2[3];
+ T3_32BIT_REGISTER WatchdogSavedState;
+ T3_32BIT_REGISTER LastBrchAddr;
+ T3_32BIT_REGISTER SpadUnderflowSet;
+ T3_32BIT_REGISTER reserved3[(0x200 - 0x50) / 4];
+ T3_32BIT_REGISTER Regs[32];
+ T3_32BIT_REGISTER reserved4[(0x400 - 0x280) / 4];
+ } reg;
+} T3_CPU, *PT3_CPU;
+
+/******************************************************************************/
+/* Write DMA control registers. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define DMA_WRITE_MODE_RESET BIT_0
+#define DMA_WRITE_MODE_ENABLE BIT_1
+#define DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE BIT_2
+#define DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE BIT_3
+#define DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE BIT_4
+#define DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE BIT_5
+#define DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE BIT_6
+#define DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE BIT_7
+#define DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE BIT_8
+#define DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE BIT_9
+
+ T3_32BIT_REGISTER Status;
+#define DMA_WRITE_STATUS_TARGET_ABORT_ATTN BIT_2
+#define DMA_WRITE_STATUS_MASTER_ABORT_ATTN BIT_3
+#define DMA_WRITE_STATUS_PARITY_ERROR_ATTN BIT_4
+#define DMA_WRITE_STATUS_ADDR_OVERFLOW_ATTN BIT_5
+#define DMA_WRITE_STATUS_FIFO_OVERRUN_ATTN BIT_6
+#define DMA_WRITE_STATUS_FIFO_UNDERRUN_ATTN BIT_7
+#define DMA_WRITE_STATUS_FIFO_OVERREAD_ATTN BIT_8
+#define DMA_WRITE_STATUS_LONG_READ_ATTN BIT_9
+
+ /* Unused space. */
+ LM_UINT8 Unused[1016];
+} T3_DMA_WRITE, *PT3_DMA_WRITE;
+
+/******************************************************************************/
+/* Mailbox registers. */
+/******************************************************************************/
+
+typedef struct {
+ /* Interrupt mailbox registers. */
+ T3_64BIT_REGISTER Interrupt[4];
+
+ /* General mailbox registers. */
+ T3_64BIT_REGISTER General[8];
+
+ /* Reload statistics mailbox. */
+ T3_64BIT_REGISTER ReloadStat;
+
+ /* Receive BD ring producer index registers. */
+ T3_64BIT_REGISTER RcvStdProdIdx;
+ T3_64BIT_REGISTER RcvJumboProdIdx;
+ T3_64BIT_REGISTER RcvMiniProdIdx;
+
+ /* Receive return ring consumer index registers. */
+ T3_64BIT_REGISTER RcvRetConIdx[16];
+
+ /* Send BD ring host producer index registers. */
+ T3_64BIT_REGISTER SendHostProdIdx[16];
+
+ /* Send BD ring nic producer index registers. */
+ T3_64BIT_REGISTER SendNicProdIdx[16];
+} T3_MAILBOX, *PT3_MAILBOX;
+
+typedef struct {
+ T3_MAILBOX Mailbox;
+
+ /* Priority mailbox registers. */
+ T3_32BIT_REGISTER HighPriorityEventVector;
+ T3_32BIT_REGISTER HighPriorityEventMask;
+ T3_32BIT_REGISTER LowPriorityEventVector;
+ T3_32BIT_REGISTER LowPriorityEventMask;
+
+ /* Unused space. */
+ LM_UINT8 Unused[496];
+} T3_GRC_MAILBOX, *PT3_GRC_MAILBOX;
+
+/******************************************************************************/
+/* Flow through queues. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Reset;
+
+ LM_UINT8 Unused[12];
+
+ T3_32BIT_REGISTER DmaNormalReadFtqCtrl;
+ T3_32BIT_REGISTER DmaNormalReadFtqFullCnt;
+ T3_32BIT_REGISTER DmaNormalReadFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER DmaNormalReadFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER DmaHighReadFtqCtrl;
+ T3_32BIT_REGISTER DmaHighReadFtqFullCnt;
+ T3_32BIT_REGISTER DmaHighReadFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER DmaHighReadFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER DmaCompDiscardFtqCtrl;
+ T3_32BIT_REGISTER DmaCompDiscardFtqFullCnt;
+ T3_32BIT_REGISTER DmaCompDiscardFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER DmaCompDiscardFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER SendBdCompFtqCtrl;
+ T3_32BIT_REGISTER SendBdCompFtqFullCnt;
+ T3_32BIT_REGISTER SendBdCompFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER SendBdCompFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER SendDataInitiatorFtqCtrl;
+ T3_32BIT_REGISTER SendDataInitiatorFtqFullCnt;
+ T3_32BIT_REGISTER SendDataInitiatorFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER SendDataInitiatorFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER DmaNormalWriteFtqCtrl;
+ T3_32BIT_REGISTER DmaNormalWriteFtqFullCnt;
+ T3_32BIT_REGISTER DmaNormalWriteFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER DmaNormalWriteFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER DmaHighWriteFtqCtrl;
+ T3_32BIT_REGISTER DmaHighWriteFtqFullCnt;
+ T3_32BIT_REGISTER DmaHighWriteFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER DmaHighWriteFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER SwType1FtqCtrl;
+ T3_32BIT_REGISTER SwType1FtqFullCnt;
+ T3_32BIT_REGISTER SwType1FtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER SwType1FtqFifoWritePeek;
+
+ T3_32BIT_REGISTER SendDataCompFtqCtrl;
+ T3_32BIT_REGISTER SendDataCompFtqFullCnt;
+ T3_32BIT_REGISTER SendDataCompFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER SendDataCompFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER HostCoalesceFtqCtrl;
+ T3_32BIT_REGISTER HostCoalesceFtqFullCnt;
+ T3_32BIT_REGISTER HostCoalesceFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER HostCoalesceFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER MacTxFtqCtrl;
+ T3_32BIT_REGISTER MacTxFtqFullCnt;
+ T3_32BIT_REGISTER MacTxFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER MacTxFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER MbufClustFreeFtqCtrl;
+ T3_32BIT_REGISTER MbufClustFreeFtqFullCnt;
+ T3_32BIT_REGISTER MbufClustFreeFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER MbufClustFreeFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER RcvBdCompFtqCtrl;
+ T3_32BIT_REGISTER RcvBdCompFtqFullCnt;
+ T3_32BIT_REGISTER RcvBdCompFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER RcvBdCompFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER RcvListPlmtFtqCtrl;
+ T3_32BIT_REGISTER RcvListPlmtFtqFullCnt;
+ T3_32BIT_REGISTER RcvListPlmtFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER RcvListPlmtFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER RcvDataBdInitiatorFtqCtrl;
+ T3_32BIT_REGISTER RcvDataBdInitiatorFtqFullCnt;
+ T3_32BIT_REGISTER RcvDataBdInitiatorFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER RcvDataBdInitiatorFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER RcvDataCompFtqCtrl;
+ T3_32BIT_REGISTER RcvDataCompFtqFullCnt;
+ T3_32BIT_REGISTER RcvDataCompFtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER RcvDataCompFtqFifoWritePeek;
+
+ T3_32BIT_REGISTER SwType2FtqCtrl;
+ T3_32BIT_REGISTER SwType2FtqFullCnt;
+ T3_32BIT_REGISTER SwType2FtqFifoEnqueueDequeue;
+ T3_32BIT_REGISTER SwType2FtqFifoWritePeek;
+
+ /* Unused space. */
+ LM_UINT8 Unused2[736];
+} T3_FTQ, *PT3_FTQ;
+
+/******************************************************************************/
+/* Message signaled interrupt registers. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define MSI_MODE_RESET BIT_0
+#define MSI_MODE_ENABLE BIT_1
+ T3_32BIT_REGISTER Status;
+
+ T3_32BIT_REGISTER MsiFifoAccess;
+
+ /* Unused space. */
+ LM_UINT8 Unused[1012];
+} T3_MSG_SIGNALED_INT, *PT3_MSG_SIGNALED_INT;
+
+/******************************************************************************/
+/* DMA Completion registes. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Mode;
+#define DMA_COMP_MODE_RESET BIT_0
+#define DMA_COMP_MODE_ENABLE BIT_1
+
+ /* Unused space. */
+ LM_UINT8 Unused[1020];
+} T3_DMA_COMPLETION, *PT3_DMA_COMPLETION;
+
+/******************************************************************************/
+/* GRC registers. */
+/******************************************************************************/
+
+typedef struct {
+ /* Mode control register. */
+ T3_32BIT_REGISTER Mode;
+#define GRC_MODE_UPDATE_ON_COALESCING BIT_0
+#define GRC_MODE_BYTE_SWAP_NON_FRAME_DATA BIT_1
+#define GRC_MODE_WORD_SWAP_NON_FRAME_DATA BIT_2
+#define GRC_MODE_BYTE_SWAP_DATA BIT_4
+#define GRC_MODE_WORD_SWAP_DATA BIT_5
+#define GRC_MODE_SPLIT_HEADER_MODE BIT_8
+#define GRC_MODE_NO_FRAME_CRACKING BIT_9
+#define GRC_MODE_INCLUDE_CRC BIT_10
+#define GRC_MODE_ALLOW_BAD_FRAMES BIT_11
+#define GRC_MODE_NO_INTERRUPT_ON_SENDS BIT_13
+#define GRC_MODE_NO_INTERRUPT_ON_RECEIVE BIT_14
+#define GRC_MODE_FORCE_32BIT_PCI_BUS_MODE BIT_15
+#define GRC_MODE_HOST_STACK_UP BIT_16
+#define GRC_MODE_HOST_SEND_BDS BIT_17
+#define GRC_MODE_TX_NO_PSEUDO_HEADER_CHKSUM BIT_20
+#define GRC_MODE_RX_NO_PSEUDO_HEADER_CHKSUM BIT_23
+#define GRC_MODE_INT_ON_TX_CPU_ATTN BIT_24
+#define GRC_MODE_INT_ON_RX_CPU_ATTN BIT_25
+#define GRC_MODE_INT_ON_MAC_ATTN BIT_26
+#define GRC_MODE_INT_ON_DMA_ATTN BIT_27
+#define GRC_MODE_INT_ON_FLOW_ATTN BIT_28
+#define GRC_MODE_4X_NIC_BASED_SEND_RINGS BIT_29
+#define GRC_MODE_MULTICAST_FRAME_ENABLE BIT_30
+
+ /* Misc configuration register. */
+ T3_32BIT_REGISTER MiscCfg;
+#define GRC_MISC_CFG_CORE_CLOCK_RESET BIT_0
+#define GRC_MISC_PRESCALAR_TIMER_MASK 0xfe
+#define GRC_MISC_BD_ID_MASK 0x0001e000
+#define GRC_MISC_BD_ID_5700 0x0001e000
+#define GRC_MISC_BD_ID_5701 0x00000000
+#define GRC_MISC_BD_ID_5703 0x00000000
+#define GRC_MISC_BD_ID_5703S 0x00002000
+#define GRC_MISC_BD_ID_5702FE 0x00004000
+#define GRC_MISC_BD_ID_5704 0x00000000
+#define GRC_MISC_BD_ID_5704CIOBE 0x00004000
+
+ /* Miscellaneous local control register. */
+ T3_32BIT_REGISTER LocalCtrl;
+#define GRC_MISC_LOCAL_CTRL_INT_ACTIVE BIT_0
+#define GRC_MISC_LOCAL_CTRL_CLEAR_INT BIT_1
+#define GRC_MISC_LOCAL_CTRL_SET_INT BIT_2
+#define GRC_MISC_LOCAL_CTRL_INT_ON_ATTN BIT_3
+#define GRC_MISC_LOCAL_CTRL_GPIO_INPUT0 BIT_8
+#define GRC_MISC_LOCAL_CTRL_GPIO_INPUT1 BIT_9
+#define GRC_MISC_LOCAL_CTRL_GPIO_INPUT2 BIT_10
+#define GRC_MISC_LOCAL_CTRL_GPIO_OE0 BIT_11
+#define GRC_MISC_LOCAL_CTRL_GPIO_OE1 BIT_12
+#define GRC_MISC_LOCAL_CTRL_GPIO_OE2 BIT_13
+#define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 BIT_14
+#define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 BIT_15
+#define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2 BIT_16
+#define GRC_MISC_LOCAL_CTRL_ENABLE_EXT_MEMORY BIT_17
+#define GRC_MISC_LOCAL_CTRL_BANK_SELECT BIT_21
+#define GRC_MISC_LOCAL_CTRL_SSRAM_TYPE BIT_22
+
+#define GRC_MISC_MEMSIZE_256K 0
+#define GRC_MISC_MEMSIZE_512K (1 << 18)
+#define GRC_MISC_MEMSIZE_1024K (2 << 18)
+#define GRC_MISC_MEMSIZE_2048K (3 << 18)
+#define GRC_MISC_MEMSIZE_4096K (4 << 18)
+#define GRC_MISC_MEMSIZE_8192K (5 << 18)
+#define GRC_MISC_MEMSIZE_16M (6 << 18)
+#define GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM BIT_24
+
+ T3_32BIT_REGISTER Timer;
+
+ T3_32BIT_REGISTER RxCpuEvent;
+ T3_32BIT_REGISTER RxTimerRef;
+ T3_32BIT_REGISTER RxCpuSemaphore;
+ T3_32BIT_REGISTER RemoteRxCpuAttn;
+
+ T3_32BIT_REGISTER TxCpuEvent;
+ T3_32BIT_REGISTER TxTimerRef;
+ T3_32BIT_REGISTER TxCpuSemaphore;
+ T3_32BIT_REGISTER RemoteTxCpuAttn;
+
+ T3_64BIT_REGISTER MemoryPowerUp;
+
+ T3_32BIT_REGISTER EepromAddr;
+#define SEEPROM_ADDR_WRITE 0
+#define SEEPROM_ADDR_READ (1 << 31)
+#define SEEPROM_ADDR_RW_MASK 0x80000000
+#define SEEPROM_ADDR_COMPLETE (1 << 30)
+#define SEEPROM_ADDR_FSM_RESET (1 << 29)
+#define SEEPROM_ADDR_DEV_ID(x) (x << 26)
+#define SEEPROM_ADDR_DEV_ID_MASK 0x1c000000
+#define SEEPROM_ADDR_START (1 << 25)
+#define SEEPROM_ADDR_CLK_PERD(x) (x << 16)
+#define SEEPROM_ADDR_ADDRESS(x) (x & 0xfffc)
+#define SEEPROM_ADDR_ADDRESS_MASK 0x0000ffff
+
+#define SEEPROM_CLOCK_PERIOD 60
+#define SEEPROM_CHIP_SIZE (64 * 1024)
+
+ T3_32BIT_REGISTER EepromData;
+ T3_32BIT_REGISTER EepromCtrl;
+
+ T3_32BIT_REGISTER MdiCtrl;
+ T3_32BIT_REGISTER SepromDelay;
+
+ /* Unused space. */
+ LM_UINT8 Unused[948];
+} T3_GRC, *PT3_GRC;
+
+/******************************************************************************/
+/* NVRAM control registers. */
+/******************************************************************************/
+
+typedef struct {
+ T3_32BIT_REGISTER Cmd;
+#define NVRAM_CMD_RESET BIT_0
+#define NVRAM_CMD_DONE BIT_3
+#define NVRAM_CMD_DO_IT BIT_4
+#define NVRAM_CMD_WR BIT_5
+#define NVRAM_CMD_RD BIT_NONE
+#define NVRAM_CMD_ERASE BIT_6
+#define NVRAM_CMD_FIRST BIT_7
+#define NVRAM_CMD_LAST BIT_8
+
+ T3_32BIT_REGISTER Status;
+ T3_32BIT_REGISTER WriteData;
+
+ T3_32BIT_REGISTER Addr;
+#define NVRAM_ADDRESS_MASK 0xffffff
+
+ T3_32BIT_REGISTER ReadData;
+
+ /* Flash config 1 register. */
+ T3_32BIT_REGISTER Config1;
+#define FLASH_INTERFACE_ENABLE BIT_0
+#define FLASH_SSRAM_BUFFERRED_MODE BIT_1
+#define FLASH_PASS_THRU_MODE BIT_2
+#define FLASH_BIT_BANG_MODE BIT_3
+#define FLASH_COMPAT_BYPASS BIT_31
+
+ /* Buffered flash (Atmel: AT45DB011B) specific information */
+#define BUFFERED_FLASH_PAGE_POS 9
+#define BUFFERED_FLASH_BYTE_ADDR_MASK ((1<<BUFFERED_FLASH_PAGE_POS) - 1)
+#define BUFFERED_FLASH_PAGE_SIZE 264
+#define BUFFERED_FLASH_PHY_PAGE_SIZE 512
+
+ T3_32BIT_REGISTER Config2;
+ T3_32BIT_REGISTER Config3;
+ T3_32BIT_REGISTER SwArb;
+#define SW_ARB_REQ_SET0 BIT_0
+#define SW_ARB_REQ_SET1 BIT_1
+#define SW_ARB_REQ_SET2 BIT_2
+#define SW_ARB_REQ_SET3 BIT_3
+#define SW_ARB_REQ_CLR0 BIT_4
+#define SW_ARB_REQ_CLR1 BIT_5
+#define SW_ARB_REQ_CLR2 BIT_6
+#define SW_ARB_REQ_CLR3 BIT_7
+#define SW_ARB_GNT0 BIT_8
+#define SW_ARB_GNT1 BIT_9
+#define SW_ARB_GNT2 BIT_10
+#define SW_ARB_GNT3 BIT_11
+#define SW_ARB_REQ0 BIT_12
+#define SW_ARB_REQ1 BIT_13
+#define SW_ARB_REQ2 BIT_14
+#define SW_ARB_REQ3 BIT_15
+
+ /* Unused space. */
+ LM_UINT8 Unused[988];
+} T3_NVRAM, *PT3_NVRAM;
+
+/******************************************************************************/
+/* NIC's internal memory. */
+/******************************************************************************/
+
+typedef struct {
+ /* Page zero for the internal CPUs. */
+ LM_UINT8 PageZero[0x100]; /* 0x0000 */
+
+ /* Send RCBs. */
+ T3_RCB SendRcb[16]; /* 0x0100 */
+
+ /* Receive Return RCBs. */
+ T3_RCB RcvRetRcb[16]; /* 0x0200 */
+
+ /* Statistics block. */
+ T3_STATS_BLOCK StatsBlk; /* 0x0300 */
+
+ /* Status block. */
+ T3_STATUS_BLOCK StatusBlk; /* 0x0b00 */
+
+ /* Reserved for software. */
+ LM_UINT8 Reserved[1200]; /* 0x0b50 */
+
+ /* Unmapped region. */
+ LM_UINT8 Unmapped[4096]; /* 0x1000 */
+
+ /* DMA descriptors. */
+ LM_UINT8 DmaDesc[8192]; /* 0x2000 */
+
+ /* Buffer descriptors. */
+ LM_UINT8 BufferDesc[16384]; /* 0x4000 */
+} T3_FIRST_32K_SRAM, *PT3_FIRST_32K_SRAM;
+
+/******************************************************************************/
+/* Memory layout. */
+/******************************************************************************/
+
+typedef struct {
+ /* PCI configuration registers. */
+ T3_PCI_CONFIGURATION PciCfg;
+
+ /* Unused. */
+ LM_UINT8 Unused1[0x100]; /* 0x0100 */
+
+ /* Mailbox . */
+ T3_MAILBOX Mailbox; /* 0x0200 */
+
+ /* MAC control registers. */
+ T3_MAC_CONTROL MacCtrl; /* 0x0400 */
+
+ /* Send data initiator control registers. */
+ T3_SEND_DATA_INITIATOR SndDataIn; /* 0x0c00 */
+
+ /* Send data completion Control registers. */
+ T3_SEND_DATA_COMPLETION SndDataComp; /* 0x1000 */
+
+ /* Send BD ring selector. */
+ T3_SEND_BD_SELECTOR SndBdSel; /* 0x1400 */
+
+ /* Send BD initiator control registers. */
+ T3_SEND_BD_INITIATOR SndBdIn; /* 0x1800 */
+
+ /* Send BD completion control registers. */
+ T3_SEND_BD_COMPLETION SndBdComp; /* 0x1c00 */
+
+ /* Receive list placement control registers. */
+ T3_RCV_LIST_PLACEMENT RcvListPlmt; /* 0x2000 */
+
+ /* Receive Data and Receive BD Initiator Control. */
+ T3_RCV_DATA_BD_INITIATOR RcvDataBdIn; /* 0x2400 */
+
+ /* Receive Data Completion Control */
+ T3_RCV_DATA_COMPLETION RcvDataComp; /* 0x2800 */
+
+ /* Receive BD Initiator Control Registers. */
+ T3_RCV_BD_INITIATOR RcvBdIn; /* 0x2c00 */
+
+ /* Receive BD Completion Control Registers. */
+ T3_RCV_BD_COMPLETION RcvBdComp; /* 0x3000 */
+
+ /* Receive list selector control registers. */
+ T3_RCV_LIST_SELECTOR RcvListSel; /* 0x3400 */
+
+ /* Mbuf cluster free registers. */
+ T3_MBUF_CLUSTER_FREE MbufClusterFree; /* 0x3800 */
+
+ /* Host coalescing control registers. */
+ T3_HOST_COALESCING HostCoalesce; /* 0x3c00 */
+
+ /* Memory arbiter control registers. */
+ T3_MEM_ARBITER MemArbiter; /* 0x4000 */
+
+ /* Buffer manger control registers. */
+ T3_BUFFER_MANAGER BufMgr; /* 0x4400 */
+
+ /* Read DMA control registers. */
+ T3_DMA_READ DmaRead; /* 0x4800 */
+
+ /* Write DMA control registers. */
+ T3_DMA_WRITE DmaWrite; /* 0x4c00 */
+
+ T3_CPU rxCpu; /* 0x5000 */
+ T3_CPU txCpu; /* 0x5400 */
+
+ /* Mailboxes. */
+ T3_GRC_MAILBOX GrcMailbox; /* 0x5800 */
+
+ /* Flow Through queues. */
+ T3_FTQ Ftq; /* 0x5c00 */
+
+ /* Message signaled interrupt registes. */
+ T3_MSG_SIGNALED_INT Msi; /* 0x6000 */
+
+ /* DMA completion registers. */
+ T3_DMA_COMPLETION DmaComp; /* 0x6400 */
+
+ /* GRC registers. */
+ T3_GRC Grc; /* 0x6800 */
+
+ /* Unused space. */
+ LM_UINT8 Unused2[1024]; /* 0x6c00 */
+
+ /* NVRAM registers. */
+ T3_NVRAM Nvram; /* 0x7000 */
+
+ /* Unused space. */
+ LM_UINT8 Unused3[3072]; /* 0x7400 */
+
+ /* The 32k memory window into the NIC's */
+ /* internal memory. The memory window is */
+ /* controlled by the Memory Window Base */
+ /* Address register. This register is located */
+ /* in the PCI configuration space. */
+ union { /* 0x8000 */
+ T3_FIRST_32K_SRAM First32k;
+
+ /* Use the memory window base address register to determine the */
+ /* MBUF segment. */
+ LM_UINT32 Mbuf[32768 / 4];
+ LM_UINT32 MemBlock32K[32768 / 4];
+ } uIntMem;
+} T3_STD_MEM_MAP, *PT3_STD_MEM_MAP;
+
+/******************************************************************************/
+/* Adapter info. */
+/******************************************************************************/
+
+typedef struct {
+ LM_UINT16 Svid;
+ LM_UINT16 Ssid;
+ LM_UINT32 PhyId;
+ LM_UINT32 Serdes; /* 0 = copper PHY, 1 = Serdes */
+} LM_ADAPTER_INFO, *PLM_ADAPTER_INFO;
+
+/******************************************************************************/
+/* Packet queues. */
+/******************************************************************************/
+
+DECLARE_QUEUE_TYPE (LM_RX_PACKET_Q, MAX_RX_PACKET_DESC_COUNT);
+DECLARE_QUEUE_TYPE (LM_TX_PACKET_Q, MAX_TX_PACKET_DESC_COUNT);
+
+/******************************************************************************/
+/* Tx counters. */
+/******************************************************************************/
+
+typedef struct {
+ LM_COUNTER TxPacketGoodCnt;
+ LM_COUNTER TxBytesGoodCnt;
+ LM_COUNTER TxPacketAbortedCnt;
+ LM_COUNTER NoSendBdLeftCnt;
+ LM_COUNTER NoMapRegisterLeftCnt;
+ LM_COUNTER TooManyFragmentsCnt;
+ LM_COUNTER NoTxPacketDescCnt;
+} LM_TX_COUNTERS, *PLM_TX_COUNTERS;
+
+/******************************************************************************/
+/* Rx counters. */
+/******************************************************************************/
+
+typedef struct {
+ LM_COUNTER RxPacketGoodCnt;
+ LM_COUNTER RxBytesGoodCnt;
+ LM_COUNTER RxPacketErrCnt;
+ LM_COUNTER RxErrCrcCnt;
+ LM_COUNTER RxErrCollCnt;
+ LM_COUNTER RxErrLinkLostCnt;
+ LM_COUNTER RxErrPhyDecodeCnt;
+ LM_COUNTER RxErrOddNibbleCnt;
+ LM_COUNTER RxErrMacAbortCnt;
+ LM_COUNTER RxErrShortPacketCnt;
+ LM_COUNTER RxErrNoResourceCnt;
+ LM_COUNTER RxErrLargePacketCnt;
+} LM_RX_COUNTERS, *PLM_RX_COUNTERS;
+
+/******************************************************************************/
+/* Receive producer rings. */
+/******************************************************************************/
+
+typedef enum {
+ T3_UNKNOWN_RCV_PROD_RING = 0,
+ T3_STD_RCV_PROD_RING = 1,
+ T3_MINI_RCV_PROD_RING = 2,
+ T3_JUMBO_RCV_PROD_RING = 3
+} T3_RCV_PROD_RING, *PT3_RCV_PROD_RING;
+
+/******************************************************************************/
+/* Packet descriptor. */
+/******************************************************************************/
+
+#define LM_PACKET_SIGNATURE_TX 0x6861766b
+#define LM_PACKET_SIGNATURE_RX 0x6b766168
+
+typedef struct _LM_PACKET {
+ /* Set in LM. */
+ LM_STATUS PacketStatus;
+
+ /* Set in LM for Rx, in UM for Tx. */
+ LM_UINT32 PacketSize;
+
+ LM_UINT16 Flags;
+
+ LM_UINT16 VlanTag;
+
+ union {
+ /* Send info. */
+ struct {
+ /* Set up by UM. */
+ LM_UINT32 FragCount;
+
+ } Tx;
+
+ /* Receive info. */
+ struct {
+ /* This descriptor belongs to either Std, Mini, or Jumbo ring. */
+ T3_RCV_PROD_RING RcvProdRing;
+
+ /* Receive buffer size */
+ LM_UINT32 RxBufferSize;
+
+ /* Checksum information. */
+ LM_UINT16 IpChecksum;
+ LM_UINT16 TcpUdpChecksum;
+
+ } Rx;
+ } u;
+} LM_PACKET;
+
+/******************************************************************************/
+/* Tigon3 device block. */
+/******************************************************************************/
+
+typedef struct _LM_DEVICE_BLOCK {
+ int index; /* Device ID */
+ /* Memory view. */
+ PT3_STD_MEM_MAP pMemView;
+
+ /* Base address of the block of memory in which the LM_PACKET descriptors */
+ /* are allocated from. */
+ PLM_VOID pPacketDescBase;
+
+ LM_UINT32 MiscHostCtrl;
+ LM_UINT32 GrcLocalCtrl;
+ LM_UINT32 DmaReadWriteCtrl;
+ LM_UINT32 PciState;
+
+ /* Rx info */
+ LM_UINT32 RxStdDescCnt;
+ LM_UINT32 RxStdQueuedCnt;
+ LM_UINT32 RxStdProdIdx;
+
+ PT3_RCV_BD pRxStdBdVirt;
+ LM_PHYSICAL_ADDRESS RxStdBdPhy;
+
+ LM_UINT32 RxPacketDescCnt;
+ LM_RX_PACKET_Q RxPacketFreeQ;
+ LM_RX_PACKET_Q RxPacketReceivedQ;
+
+ /* Receive info. */
+ PT3_RCV_BD pRcvRetBdVirt;
+ LM_PHYSICAL_ADDRESS RcvRetBdPhy;
+ LM_UINT32 RcvRetConIdx;
+
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ LM_UINT32 RxJumboDescCnt;
+ LM_UINT32 RxJumboBufferSize;
+ LM_UINT32 RxJumboQueuedCnt;
+
+ LM_UINT32 RxJumboProdIdx;
+
+ PT3_RCV_BD pRxJumboBdVirt;
+ LM_PHYSICAL_ADDRESS RxJumboBdPhy;
+#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
+
+ /* These values are used by the upper module to inform the protocol */
+ /* of the maximum transmit/receive packet size. */
+ LM_UINT32 TxMtu; /* Does not include CRC. */
+ LM_UINT32 RxMtu; /* Does not include CRC. */
+
+ /* We need to shadow the EMAC, Rx, Tx mode registers. With B0 silicon, */
+ /* we may have problems reading any MAC registers in 10mb mode. */
+ LM_UINT32 MacMode;
+ LM_UINT32 RxMode;
+ LM_UINT32 TxMode;
+
+ /* MiMode register. */
+ LM_UINT32 MiMode;
+
+ /* Host coalesce mode register. */
+ LM_UINT32 CoalesceMode;
+
+ /* Send info. */
+ LM_UINT32 TxPacketDescCnt;
+
+ /* Tx info. */
+ LM_TX_PACKET_Q TxPacketFreeQ;
+ LM_TX_PACKET_Q TxPacketActiveQ;
+ LM_TX_PACKET_Q TxPacketXmittedQ;
+
+ /* Pointers to SendBd. */
+ PT3_SND_BD pSendBdVirt;
+ LM_PHYSICAL_ADDRESS SendBdPhy; /* Only valid for Host based Send BD. */
+
+ /* Send producer and consumer indices. */
+ LM_UINT32 SendProdIdx;
+ LM_UINT32 SendConIdx;
+
+ /* Number of BD left. */
+ atomic_t SendBdLeft;
+
+ T3_SND_BD ShadowSendBd[T3_SEND_RCB_ENTRY_COUNT];
+
+ /* Counters. */
+ LM_RX_COUNTERS RxCounters;
+ LM_TX_COUNTERS TxCounters;
+
+ /* Host coalescing parameters. */
+ LM_UINT32 RxCoalescingTicks;
+ LM_UINT32 TxCoalescingTicks;
+ LM_UINT32 RxMaxCoalescedFrames;
+ LM_UINT32 TxMaxCoalescedFrames;
+ LM_UINT32 StatsCoalescingTicks;
+ LM_UINT32 RxCoalescingTicksDuringInt;
+ LM_UINT32 TxCoalescingTicksDuringInt;
+ LM_UINT32 RxMaxCoalescedFramesDuringInt;
+ LM_UINT32 TxMaxCoalescedFramesDuringInt;
+
+ /* DMA water marks. */
+ LM_UINT32 DmaMbufLowMark;
+ LM_UINT32 RxMacMbufLowMark;
+ LM_UINT32 MbufHighMark;
+
+ /* Status block. */
+ PT3_STATUS_BLOCK pStatusBlkVirt;
+ LM_PHYSICAL_ADDRESS StatusBlkPhy;
+
+ /* Statistics block. */
+ PT3_STATS_BLOCK pStatsBlkVirt;
+ LM_PHYSICAL_ADDRESS StatsBlkPhy;
+
+ /* Current receive mask. */
+ LM_UINT32 ReceiveMask;
+
+ /* Task offload capabilities. */
+ LM_TASK_OFFLOAD TaskOffloadCap;
+
+ /* Task offload selected. */
+ LM_TASK_OFFLOAD TaskToOffload;
+
+ /* Wake up capability. */
+ LM_WAKE_UP_MODE WakeUpModeCap;
+
+ /* Wake up capability. */
+ LM_WAKE_UP_MODE WakeUpMode;
+
+ /* Flow control. */
+ LM_FLOW_CONTROL FlowControlCap;
+ LM_FLOW_CONTROL FlowControl;
+
+ /* Enable or disable PCI MWI. */
+ LM_UINT32 EnableMWI;
+
+ /* Enable 5701 tagged status mode. */
+ LM_UINT32 UseTaggedStatus;
+
+ /* NIC will not compute the pseudo header checksum. The driver or OS */
+ /* must seed the checksum field with the pseudo checksum. */
+ LM_UINT32 NoTxPseudoHdrChksum;
+
+ /* The receive checksum in the BD does not include the pseudo checksum. */
+ /* The OS or the driver must calculate the pseudo checksum and add it to */
+ /* the checksum in the BD. */
+ LM_UINT32 NoRxPseudoHdrChksum;
+
+ /* Current node address. */
+ LM_UINT8 NodeAddress[8];
+
+ /* The adapter's node address. */
+ LM_UINT8 PermanentNodeAddress[8];
+
+ /* Adapter info. */
+ LM_UINT16 BusNum;
+ LM_UINT8 DevNum;
+ LM_UINT8 FunctNum;
+ LM_UINT16 PciVendorId;
+ LM_UINT16 PciDeviceId;
+ LM_UINT32 BondId;
+ LM_UINT8 Irq;
+ LM_UINT8 IntPin;
+ LM_UINT8 CacheLineSize;
+ LM_UINT8 PciRevId;
+#if PCIX_TARGET_WORKAROUND
+ LM_UINT32 EnablePciXFix;
+#endif
+ LM_UINT32 UndiFix; /* new, jimmy */
+ LM_UINT32 PciCommandStatusWords;
+ LM_UINT32 ChipRevId;
+ LM_UINT16 SubsystemVendorId;
+ LM_UINT16 SubsystemId;
+#if 0 /* Jimmy, deleted in new driver */
+ LM_UINT32 MemBaseLow;
+ LM_UINT32 MemBaseHigh;
+ LM_UINT32 MemBaseSize;
+#endif
+ PLM_UINT8 pMappedMemBase;
+
+ /* Saved PCI configuration registers for restoring after a reset. */
+ LM_UINT32 SavedCacheLineReg;
+
+ /* Phy info. */
+ LM_UINT32 PhyAddr;
+ LM_UINT32 PhyId;
+
+ /* Requested phy settings. */
+ LM_REQUESTED_MEDIA_TYPE RequestedMediaType;
+
+ /* Disable auto-negotiation. */
+ LM_UINT32 DisableAutoNeg;
+
+ /* Ways for the MAC to get link change interrupt. */
+ LM_UINT32 PhyIntMode;
+#define T3_PHY_INT_MODE_AUTO 0
+#define T3_PHY_INT_MODE_MI_INTERRUPT 1
+#define T3_PHY_INT_MODE_LINK_READY 2
+#define T3_PHY_INT_MODE_AUTO_POLLING 3
+
+ /* Ways to determine link change status. */
+ LM_UINT32 LinkChngMode;
+#define T3_LINK_CHNG_MODE_AUTO 0
+#define T3_LINK_CHNG_MODE_USE_STATUS_REG 1
+#define T3_LINK_CHNG_MODE_USE_STATUS_BLOCK 2
+
+ /* LED mode. */
+ LM_UINT32 LedMode;
+
+#define LED_MODE_AUTO 0
+
+ /* 5700/01 LED mode. */
+#define LED_MODE_THREE_LINK 1
+#define LED_MODE_LINK10 2
+
+ /* 5703/02/04 LED mode. */
+#define LED_MODE_OPEN_DRAIN 1
+#define LED_MODE_OUTPUT 2
+
+ /* WOL Speed */
+ LM_UINT32 WolSpeed;
+#define WOL_SPEED_10MB 1
+#define WOL_SPEED_100MB 2
+
+ /* Reset the PHY on initialization. */
+ LM_UINT32 ResetPhyOnInit;
+
+ LM_UINT32 RestoreOnWakeUp;
+ LM_REQUESTED_MEDIA_TYPE WakeUpRequestedMediaType;
+ LM_UINT32 WakeUpDisableAutoNeg;
+
+ /* Current phy settings. */
+ LM_MEDIA_TYPE MediaType;
+ LM_LINE_SPEED LineSpeed;
+ LM_LINE_SPEED OldLineSpeed;
+ LM_DUPLEX_MODE DuplexMode;
+ LM_STATUS LinkStatus;
+ LM_UINT32 advertising; /* Jimmy, new! */
+ LM_UINT32 advertising1000; /* Jimmy, new! */
+
+ /* Multicast address list. */
+ LM_UINT32 McEntryCount;
+ LM_UINT8 McTable[LM_MAX_MC_TABLE_SIZE][LM_MC_ENTRY_SIZE];
+
+ /* Use NIC or Host based send BD. */
+ LM_UINT32 NicSendBd;
+
+ /* Athlon fix. */
+ LM_UINT32 DelayPciGrant;
+
+ /* Enable OneDmaAtOnce */
+ LM_UINT32 OneDmaAtOnce;
+
+ /* Split Mode flags, Jimmy new */
+ LM_UINT32 SplitModeEnable;
+ LM_UINT32 SplitModeMaxReq;
+
+ /* Init flag. */
+ LM_BOOL InitDone;
+
+ /* Shutdown flag. Set by the upper module. */
+ LM_BOOL ShuttingDown;
+
+ /* Flag to determine whether to call LM_QueueRxPackets or not in */
+ /* LM_ResetAdapter routine. */
+ LM_BOOL QueueRxPackets;
+
+ LM_UINT32 MbufBase;
+ LM_UINT32 MbufSize;
+
+ /* TRUE if we have a SERDES PHY. */
+ LM_UINT32 EnableTbi;
+
+ /* Ethernet@WireSpeed. */
+ LM_UINT32 EnableWireSpeed;
+
+ LM_UINT32 EepromWp;
+
+#if INCLUDE_TBI_SUPPORT
+ /* Autoneg state info. */
+ AN_STATE_INFO AnInfo;
+ LM_UINT32 PollTbiLink;
+ LM_UINT32 IgnoreTbiLinkChange;
+#endif
+ char PartNo[24];
+ char BootCodeVer[16];
+ char BusSpeedStr[24]; /* Jimmy, new! */
+ LM_UINT32 PhyCrcCount;
+} LM_DEVICE_BLOCK;
+
+#define T3_REG_CPU_VIEW 0xc0000000
+
+#define T3_BLOCK_DMA_RD (1 << 0)
+#define T3_BLOCK_DMA_COMP (1 << 1)
+#define T3_BLOCK_RX_BD_INITIATOR (1 << 2)
+#define T3_BLOCK_RX_BD_COMP (1 << 3)
+#define T3_BLOCK_DMA_WR (1 << 4)
+#define T3_BLOCK_MSI_HANDLER (1 << 5)
+#define T3_BLOCK_RX_LIST_PLMT (1 << 6)
+#define T3_BLOCK_RX_LIST_SELECTOR (1 << 7)
+#define T3_BLOCK_RX_DATA_INITIATOR (1 << 8)
+#define T3_BLOCK_RX_DATA_COMP (1 << 9)
+#define T3_BLOCK_HOST_COALESING (1 << 10)
+#define T3_BLOCK_MAC_RX_ENGINE (1 << 11)
+#define T3_BLOCK_MBUF_CLUSTER_FREE (1 << 12)
+#define T3_BLOCK_SEND_BD_INITIATOR (1 << 13)
+#define T3_BLOCK_SEND_BD_COMP (1 << 14)
+#define T3_BLOCK_SEND_BD_SELECTOR (1 << 15)
+#define T3_BLOCK_SEND_DATA_INITIATOR (1 << 16)
+#define T3_BLOCK_SEND_DATA_COMP (1 << 17)
+#define T3_BLOCK_MAC_TX_ENGINE (1 << 18)
+#define T3_BLOCK_MEM_ARBITOR (1 << 19)
+#define T3_BLOCK_MBUF_MANAGER (1 << 20)
+#define T3_BLOCK_MAC_GLOBAL (1 << 21)
+
+#define LM_ENABLE 1
+#define LM_DISABLE 2
+
+#define RX_CPU_EVT_SW0 0
+#define RX_CPU_EVT_SW1 1
+#define RX_CPU_EVT_RLP 2
+#define RX_CPU_EVT_SW3 3
+#define RX_CPU_EVT_RLS 4
+#define RX_CPU_EVT_SW4 5
+#define RX_CPU_EVT_RX_BD_COMP 6
+#define RX_CPU_EVT_SW5 7
+#define RX_CPU_EVT_RDI 8
+#define RX_CPU_EVT_DMA_WR 9
+#define RX_CPU_EVT_DMA_RD 10
+#define RX_CPU_EVT_SWQ 11
+#define RX_CPU_EVT_SW6 12
+#define RX_CPU_EVT_RDC 13
+#define RX_CPU_EVT_SW7 14
+#define RX_CPU_EVT_HOST_COALES 15
+#define RX_CPU_EVT_SW8 16
+#define RX_CPU_EVT_HIGH_DMA_WR 17
+#define RX_CPU_EVT_HIGH_DMA_RD 18
+#define RX_CPU_EVT_SW9 19
+#define RX_CPU_EVT_DMA_ATTN 20
+#define RX_CPU_EVT_LOW_P_MBOX 21
+#define RX_CPU_EVT_HIGH_P_MBOX 22
+#define RX_CPU_EVT_SW10 23
+#define RX_CPU_EVT_TX_CPU_ATTN 24
+#define RX_CPU_EVT_MAC_ATTN 25
+#define RX_CPU_EVT_RX_CPU_ATTN 26
+#define RX_CPU_EVT_FLOW_ATTN 27
+#define RX_CPU_EVT_SW11 28
+#define RX_CPU_EVT_TIMER 29
+#define RX_CPU_EVT_SW12 30
+#define RX_CPU_EVT_SW13 31
+
+/* RX-CPU event */
+#define RX_CPU_EVENT_SW_EVENT0 (1 << RX_CPU_EVT_SW0)
+#define RX_CPU_EVENT_SW_EVENT1 (1 << RX_CPU_EVT_SW1)
+#define RX_CPU_EVENT_RLP (1 << RX_CPU_EVT_RLP)
+#define RX_CPU_EVENT_SW_EVENT3 (1 << RX_CPU_EVT_SW3)
+#define RX_CPU_EVENT_RLS (1 << RX_CPU_EVT_RLS)
+#define RX_CPU_EVENT_SW_EVENT4 (1 << RX_CPU_EVT_SW4)
+#define RX_CPU_EVENT_RX_BD_COMP (1 << RX_CPU_EVT_RX_BD_COMP)
+#define RX_CPU_EVENT_SW_EVENT5 (1 << RX_CPU_EVT_SW5)
+#define RX_CPU_EVENT_RDI (1 << RX_CPU_EVT_RDI)
+#define RX_CPU_EVENT_DMA_WR (1 << RX_CPU_EVT_DMA_WR)
+#define RX_CPU_EVENT_DMA_RD (1 << RX_CPU_EVT_DMA_RD)
+#define RX_CPU_EVENT_SWQ (1 << RX_CPU_EVT_SWQ)
+#define RX_CPU_EVENT_SW_EVENT6 (1 << RX_CPU_EVT_SW6)
+#define RX_CPU_EVENT_RDC (1 << RX_CPU_EVT_RDC)
+#define RX_CPU_EVENT_SW_EVENT7 (1 << RX_CPU_EVT_SW7)
+#define RX_CPU_EVENT_HOST_COALES (1 << RX_CPU_EVT_HOST_COALES)
+#define RX_CPU_EVENT_SW_EVENT8 (1 << RX_CPU_EVT_SW8)
+#define RX_CPU_EVENT_HIGH_DMA_WR (1 << RX_CPU_EVT_HIGH_DMA_WR)
+#define RX_CPU_EVENT_HIGH_DMA_RD (1 << RX_CPU_EVT_HIGH_DMA_RD)
+#define RX_CPU_EVENT_SW_EVENT9 (1 << RX_CPU_EVT_SW9)
+#define RX_CPU_EVENT_DMA_ATTN (1 << RX_CPU_EVT_DMA_ATTN)
+#define RX_CPU_EVENT_LOW_P_MBOX (1 << RX_CPU_EVT_LOW_P_MBOX)
+#define RX_CPU_EVENT_HIGH_P_MBOX (1 << RX_CPU_EVT_HIGH_P_MBOX)
+#define RX_CPU_EVENT_SW_EVENT10 (1 << RX_CPU_EVT_SW10)
+#define RX_CPU_EVENT_TX_CPU_ATTN (1 << RX_CPU_EVT_TX_CPU_ATTN)
+#define RX_CPU_EVENT_MAC_ATTN (1 << RX_CPU_EVT_MAC_ATTN)
+#define RX_CPU_EVENT_RX_CPU_ATTN (1 << RX_CPU_EVT_RX_CPU_ATTN)
+#define RX_CPU_EVENT_FLOW_ATTN (1 << RX_CPU_EVT_FLOW_ATTN)
+#define RX_CPU_EVENT_SW_EVENT11 (1 << RX_CPU_EVT_SW11)
+#define RX_CPU_EVENT_TIMER (1 << RX_CPU_EVT_TIMER)
+#define RX_CPU_EVENT_SW_EVENT12 (1 << RX_CPU_EVT_SW12)
+#define RX_CPU_EVENT_SW_EVENT13 (1 << RX_CPU_EVT_SW13)
+
+#define RX_CPU_MASK (RX_CPU_EVENT_SW_EVENT0 | \
+ RX_CPU_EVENT_RLP | \
+ RX_CPU_EVENT_RDI | \
+ RX_CPU_EVENT_RDC)
+
+#define TX_CPU_EVT_SW0 0
+#define TX_CPU_EVT_SW1 1
+#define TX_CPU_EVT_SW2 2
+#define TX_CPU_EVT_SW3 3
+#define TX_CPU_EVT_TX_MAC 4
+#define TX_CPU_EVT_SW4 5
+#define TX_CPU_EVT_SBDC 6
+#define TX_CPU_EVT_SW5 7
+#define TX_CPU_EVT_SDI 8
+#define TX_CPU_EVT_DMA_WR 9
+#define TX_CPU_EVT_DMA_RD 10
+#define TX_CPU_EVT_SWQ 11
+#define TX_CPU_EVT_SW6 12
+#define TX_CPU_EVT_SDC 13
+#define TX_CPU_EVT_SW7 14
+#define TX_CPU_EVT_HOST_COALES 15
+#define TX_CPU_EVT_SW8 16
+#define TX_CPU_EVT_HIGH_DMA_WR 17
+#define TX_CPU_EVT_HIGH_DMA_RD 18
+#define TX_CPU_EVT_SW9 19
+#define TX_CPU_EVT_DMA_ATTN 20
+#define TX_CPU_EVT_LOW_P_MBOX 21
+#define TX_CPU_EVT_HIGH_P_MBOX 22
+#define TX_CPU_EVT_SW10 23
+#define TX_CPU_EVT_RX_CPU_ATTN 24
+#define TX_CPU_EVT_MAC_ATTN 25
+#define TX_CPU_EVT_TX_CPU_ATTN 26
+#define TX_CPU_EVT_FLOW_ATTN 27
+#define TX_CPU_EVT_SW11 28
+#define TX_CPU_EVT_TIMER 29
+#define TX_CPU_EVT_SW12 30
+#define TX_CPU_EVT_SW13 31
+
+/* TX-CPU event */
+#define TX_CPU_EVENT_SW_EVENT0 (1 << TX_CPU_EVT_SW0)
+#define TX_CPU_EVENT_SW_EVENT1 (1 << TX_CPU_EVT_SW1)
+#define TX_CPU_EVENT_SW_EVENT2 (1 << TX_CPU_EVT_SW2)
+#define TX_CPU_EVENT_SW_EVENT3 (1 << TX_CPU_EVT_SW3)
+#define TX_CPU_EVENT_TX_MAC (1 << TX_CPU_EVT_TX_MAC)
+#define TX_CPU_EVENT_SW_EVENT4 (1 << TX_CPU_EVT_SW4)
+#define TX_CPU_EVENT_SBDC (1 << TX_CPU_EVT_SBDC)
+#define TX_CPU_EVENT_SW_EVENT5 (1 << TX_CPU_EVT_SW5)
+#define TX_CPU_EVENT_SDI (1 << TX_CPU_EVT_SDI)
+#define TX_CPU_EVENT_DMA_WR (1 << TX_CPU_EVT_DMA_WR)
+#define TX_CPU_EVENT_DMA_RD (1 << TX_CPU_EVT_DMA_RD)
+#define TX_CPU_EVENT_SWQ (1 << TX_CPU_EVT_SWQ)
+#define TX_CPU_EVENT_SW_EVENT6 (1 << TX_CPU_EVT_SW6)
+#define TX_CPU_EVENT_SDC (1 << TX_CPU_EVT_SDC)
+#define TX_CPU_EVENT_SW_EVENT7 (1 << TX_CPU_EVT_SW7)
+#define TX_CPU_EVENT_HOST_COALES (1 << TX_CPU_EVT_HOST_COALES)
+#define TX_CPU_EVENT_SW_EVENT8 (1 << TX_CPU_EVT_SW8)
+#define TX_CPU_EVENT_HIGH_DMA_WR (1 << TX_CPU_EVT_HIGH_DMA_WR)
+#define TX_CPU_EVENT_HIGH_DMA_RD (1 << TX_CPU_EVT_HIGH_DMA_RD)
+#define TX_CPU_EVENT_SW_EVENT9 (1 << TX_CPU_EVT_SW9)
+#define TX_CPU_EVENT_DMA_ATTN (1 << TX_CPU_EVT_DMA_ATTN)
+#define TX_CPU_EVENT_LOW_P_MBOX (1 << TX_CPU_EVT_LOW_P_MBOX)
+#define TX_CPU_EVENT_HIGH_P_MBOX (1 << TX_CPU_EVT_HIGH_P_MBOX)
+#define TX_CPU_EVENT_SW_EVENT10 (1 << TX_CPU_EVT_SW10)
+#define TX_CPU_EVENT_RX_CPU_ATTN (1 << TX_CPU_EVT_RX_CPU_ATTN)
+#define TX_CPU_EVENT_MAC_ATTN (1 << TX_CPU_EVT_MAC_ATTN)
+#define TX_CPU_EVENT_TX_CPU_ATTN (1 << TX_CPU_EVT_TX_CPU_ATTN)
+#define TX_CPU_EVENT_FLOW_ATTN (1 << TX_CPU_EVT_FLOW_ATTN)
+#define TX_CPU_EVENT_SW_EVENT11 (1 << TX_CPU_EVT_SW11)
+#define TX_CPU_EVENT_TIMER (1 << TX_CPU_EVT_TIMER)
+#define TX_CPU_EVENT_SW_EVENT12 (1 << TX_CPU_EVT_SW12)
+#define TX_CPU_EVENT_SW_EVENT13 (1 << TX_CPU_EVT_SW13)
+
+#define TX_CPU_MASK (TX_CPU_EVENT_SW_EVENT0 | \
+ TX_CPU_EVENT_SDI | \
+ TX_CPU_EVENT_SDC)
+
+#define T3_FTQ_TYPE1_UNDERFLOW_BIT (1 << 29)
+#define T3_FTQ_TYPE1_PASS_BIT (1 << 30)
+#define T3_FTQ_TYPE1_SKIP_BIT (1 << 31)
+
+#define T3_FTQ_TYPE2_UNDERFLOW_BIT (1 << 13)
+#define T3_FTQ_TYPE2_PASS_BIT (1 << 14)
+#define T3_FTQ_TYPE2_SKIP_BIT (1 << 15)
+
+#define T3_QID_DMA_READ 1
+#define T3_QID_DMA_HIGH_PRI_READ 2
+#define T3_QID_DMA_COMP_DX 3
+#define T3_QID_SEND_BD_COMP 4
+#define T3_QID_SEND_DATA_INITIATOR 5
+#define T3_QID_DMA_WRITE 6
+#define T3_QID_DMA_HIGH_PRI_WRITE 7
+#define T3_QID_SW_TYPE_1 8
+#define T3_QID_SEND_DATA_COMP 9
+#define T3_QID_HOST_COALESCING 10
+#define T3_QID_MAC_TX 11
+#define T3_QID_MBUF_CLUSTER_FREE 12
+#define T3_QID_RX_BD_COMP 13
+#define T3_QID_RX_LIST_PLM 14
+#define T3_QID_RX_DATA_BD_INITIATOR 15
+#define T3_QID_RX_DATA_COMP 16
+#define T3_QID_SW_TYPE2 17
+
+LM_STATUS LM_LoadFirmware (PLM_DEVICE_BLOCK pDevice,
+ PT3_FWIMG_INFO pFwImg,
+ LM_UINT32 LoadCpu, LM_UINT32 StartCpu);
+
+/******************************************************************************/
+/* NIC register read/write macros. */
+/******************************************************************************/
+
+#if 0 /* Jimmy */
+/* MAC register access. */
+LM_UINT32 LM_RegRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register);
+LM_VOID LM_RegWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register,
+ LM_UINT32 Value32);
+
+/* MAC memory access. */
+LM_UINT32 LM_MemRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr);
+LM_VOID LM_MemWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr,
+ LM_UINT32 Value32);
+
+#if PCIX_TARGET_WORKAROUND
+
+/* use memory-mapped accesses for mailboxes and reads, UNDI accesses
+ for writes to all other registers */
+#define REG_RD(pDevice, OffsetName) \
+ readl(&((pDevice)->pMemView->OffsetName))
+
+#define REG_WR(pDevice, OffsetName, Value32) \
+ (((OFFSETOF(T3_STD_MEM_MAP, OffsetName) >=0x200 ) && \
+ (OFFSETOF(T3_STD_MEM_MAP, OffsetName) <0x400)) || \
+ ((pDevice)->EnablePciXFix == FALSE)) ? \
+ (void) writel(Value32, &((pDevice)->pMemView->OffsetName)) : \
+ LM_RegWrInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName), Value32)
+
+#define MB_REG_RD(pDevice, OffsetName) \
+ readl(&((pDevice)->pMemView->OffsetName))
+
+#define MB_REG_WR(pDevice, OffsetName, Value32) \
+ writel(Value32, &((pDevice)->pMemView->OffsetName))
+
+#define REG_RD_OFFSET(pDevice, Offset) \
+ readl(&((LM_UINT8 *) (pDevice)->pMemView + Offset))
+
+#define REG_WR_OFFSET(pDevice, Offset, Value32) \
+ (((Offset >=0x200 ) && (Offset < 0x400)) || \
+ ((pDevice)->EnablePciXFix == FALSE)) ? \
+ (void) writel(Value32, ((LM_UINT8 *) (pDevice)->pMemView + Offset)) : \
+ LM_RegWrInd(pDevice, Offset, Value32)
+
+#define MEM_RD(pDevice, AddrName) \
+ LM_MemRdInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName))
+#define MEM_WR(pDevice, AddrName, Value32) \
+ LM_MemWrInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName), Value32)
+
+#define MEM_RD_OFFSET(pDevice, Offset) \
+ LM_MemRdInd(pDevice, Offset)
+#define MEM_WR_OFFSET(pDevice, Offset, Value32) \
+ LM_MemWrInd(pDevice, Offset, Value32)
+
+#else /* normal target access path below */
+
+/* Register access. */
+#define REG_RD(pDevice, OffsetName) \
+ readl(&((pDevice)->pMemView->OffsetName))
+#define REG_WR(pDevice, OffsetName, Value32) \
+ writel(Value32, &((pDevice)->pMemView->OffsetName))
+
+#define REG_RD_OFFSET(pDevice, Offset) \
+ readl(((LM_UINT8 *) (pDevice)->pMemView + Offset))
+#define REG_WR_OFFSET(pDevice, Offset, Value32) \
+ writel(Value32, ((LM_UINT8 *) (pDevice)->pMemView + Offset))
+
+/* There could be problem access the memory window directly. For now, */
+/* we have to go through the PCI configuration register. */
+#define MEM_RD(pDevice, AddrName) \
+ LM_MemRdInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName))
+#define MEM_WR(pDevice, AddrName, Value32) \
+ LM_MemWrInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName), Value32)
+
+#define MEM_RD_OFFSET(pDevice, Offset) \
+ LM_MemRdInd(pDevice, Offset)
+#define MEM_WR_OFFSET(pDevice, Offset, Value32) \
+ LM_MemWrInd(pDevice, Offset, Value32)
+
+#endif /* PCIX_TARGET_WORKAROUND */
+
+#endif /* Jimmy, merging */
+
+ /* Jimmy...rest of file is new stuff! */
+/******************************************************************************/
+/* NIC register read/write macros. */
+/******************************************************************************/
+
+/* MAC register access. */
+LM_UINT32 LM_RegRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register);
+LM_VOID LM_RegWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register,
+ LM_UINT32 Value32);
+
+/* MAC memory access. */
+LM_UINT32 LM_MemRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr);
+LM_VOID LM_MemWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr,
+ LM_UINT32 Value32);
+
+#define MB_REG_WR(pDevice, OffsetName, Value32) \
+ ((pDevice)->UndiFix) ? \
+ LM_RegWrInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName)+0x5600, \
+ Value32) : \
+ (void) __raw_writel(Value32, &((pDevice)->pMemView->OffsetName))
+
+#define MB_REG_RD(pDevice, OffsetName) \
+ (((pDevice)->UndiFix) ? \
+ LM_RegRdInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName)+0x5600) : \
+ __raw_readl(&((pDevice)->pMemView->OffsetName)))
+
+#define REG_RD(pDevice, OffsetName) \
+ (((pDevice)->UndiFix) ? \
+ LM_RegRdInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName)) : \
+ __raw_readl(&((pDevice)->pMemView->OffsetName)))
+
+#if PCIX_TARGET_WORKAROUND
+
+#define REG_WR(pDevice, OffsetName, Value32) \
+ ((pDevice)->EnablePciXFix == FALSE) ? \
+ (void) __raw_writel(Value32, &((pDevice)->pMemView->OffsetName)) : \
+ LM_RegWrInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName), Value32)
+
+#else
+
+#define REG_WR(pDevice, OffsetName, Value32) \
+ __raw_writel(Value32, &((pDevice)->pMemView->OffsetName))
+
+#endif
+
+#define MEM_RD(pDevice, AddrName) \
+ LM_MemRdInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName))
+#define MEM_WR(pDevice, AddrName, Value32) \
+ LM_MemWrInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName), Value32)
+
+#define MEM_RD_OFFSET(pDevice, Offset) \
+ LM_MemRdInd(pDevice, Offset)
+#define MEM_WR_OFFSET(pDevice, Offset, Value32) \
+ LM_MemWrInd(pDevice, Offset, Value32)
+
+#endif /* TIGON3_H */
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
new file mode 100644
index 0000000..ca6284b
--- /dev/null
+++ b/drivers/net/tsec.c
@@ -0,0 +1,1590 @@
+/*
+ * Freescale Three Speed Ethernet Controller driver
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2004, 2007 Freescale Semiconductor, Inc.
+ * (C) Copyright 2003, Motorola, Inc.
+ * author Andy Fleming
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <command.h>
+
+#if defined(CONFIG_TSEC_ENET)
+#include "tsec.h"
+#include "miiphy.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TX_BUF_CNT 2
+
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
+
+typedef volatile struct rtxbd {
+ txbd8_t txbd[TX_BUF_CNT];
+ rxbd8_t rxbd[PKTBUFSRX];
+} RTXBD;
+
+struct tsec_info_struct {
+ unsigned int phyaddr;
+ u32 flags;
+ unsigned int phyregidx;
+};
+
+/* The tsec_info structure contains 3 values which the
+ * driver uses to determine how to operate a given ethernet
+ * device. The information needed is:
+ * phyaddr - The address of the PHY which is attached to
+ * the given device.
+ *
+ * flags - This variable indicates whether the device
+ * supports gigabit speed ethernet, and whether it should be
+ * in reduced mode.
+ *
+ * phyregidx - This variable specifies which ethernet device
+ * controls the MII Management registers which are connected
+ * to the PHY. For now, only TSEC1 (index 0) has
+ * access to the PHYs, so all of the entries have "0".
+ *
+ * The values specified in the table are taken from the board's
+ * config file in include/configs/. When implementing a new
+ * board with ethernet capability, it is necessary to define:
+ * TSECn_PHY_ADDR
+ * TSECn_PHYIDX
+ *
+ * for n = 1,2,3, etc. And for FEC:
+ * FEC_PHY_ADDR
+ * FEC_PHYIDX
+ */
+static struct tsec_info_struct tsec_info[] = {
+#ifdef CONFIG_TSEC1
+ {TSEC1_PHY_ADDR, TSEC1_FLAGS, TSEC1_PHYIDX},
+#else
+ {0, 0, 0},
+#endif
+#ifdef CONFIG_TSEC2
+ {TSEC2_PHY_ADDR, TSEC2_FLAGS, TSEC2_PHYIDX},
+#else
+ {0, 0, 0},
+#endif
+#ifdef CONFIG_MPC85XX_FEC
+ {FEC_PHY_ADDR, FEC_FLAGS, FEC_PHYIDX},
+#else
+#ifdef CONFIG_TSEC3
+ {TSEC3_PHY_ADDR, TSEC3_FLAGS, TSEC3_PHYIDX},
+#else
+ {0, 0, 0},
+#endif
+#ifdef CONFIG_TSEC4
+ {TSEC4_PHY_ADDR, TSEC4_FLAGS, TSEC4_PHYIDX},
+#else
+ {0, 0, 0},
+#endif /* CONFIG_TSEC4 */
+#endif /* CONFIG_MPC85XX_FEC */
+};
+
+#define MAXCONTROLLERS (4)
+
+static int relocated = 0;
+
+static struct tsec_private *privlist[MAXCONTROLLERS];
+
+#ifdef __GNUC__
+static RTXBD rtx __attribute__ ((aligned(8)));
+#else
+#error "rtx must be 64-bit aligned"
+#endif
+
+static int tsec_send(struct eth_device *dev,
+ volatile void *packet, int length);
+static int tsec_recv(struct eth_device *dev);
+static int tsec_init(struct eth_device *dev, bd_t * bd);
+static void tsec_halt(struct eth_device *dev);
+static void init_registers(volatile tsec_t * regs);
+static void startup_tsec(struct eth_device *dev);
+static int init_phy(struct eth_device *dev);
+void write_phy_reg(struct tsec_private *priv, uint regnum, uint value);
+uint read_phy_reg(struct tsec_private *priv, uint regnum);
+struct phy_info *get_phy_info(struct eth_device *dev);
+void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
+static void adjust_link(struct eth_device *dev);
+static void relocate_cmds(void);
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+ && !defined(BITBANGMII)
+static int tsec_miiphy_write(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value);
+static int tsec_miiphy_read(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value);
+#endif
+#ifdef CONFIG_MCAST_TFTP
+static int tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set);
+#endif
+
+/* Initialize device structure. Returns success if PHY
+ * initialization succeeded (i.e. if it recognizes the PHY)
+ */
+int tsec_initialize(bd_t * bis, int index, char *devname)
+{
+ struct eth_device *dev;
+ int i;
+ struct tsec_private *priv;
+
+ dev = (struct eth_device *)malloc(sizeof *dev);
+
+ if (NULL == dev)
+ return 0;
+
+ memset(dev, 0, sizeof *dev);
+
+ priv = (struct tsec_private *)malloc(sizeof(*priv));
+
+ if (NULL == priv)
+ return 0;
+
+ privlist[index] = priv;
+ priv->regs = (volatile tsec_t *)(TSEC_BASE_ADDR + index * TSEC_SIZE);
+ priv->phyregs = (volatile tsec_t *)(TSEC_BASE_ADDR +
+ tsec_info[index].phyregidx *
+ TSEC_SIZE);
+
+ priv->phyaddr = tsec_info[index].phyaddr;
+ priv->flags = tsec_info[index].flags;
+
+ sprintf(dev->name, devname);
+ dev->iobase = 0;
+ dev->priv = priv;
+ dev->init = tsec_init;
+ dev->halt = tsec_halt;
+ dev->send = tsec_send;
+ dev->recv = tsec_recv;
+#ifdef CONFIG_MCAST_TFTP
+ dev->mcast = tsec_mcast_addr;
+#endif
+
+ /* Tell u-boot to get the addr from the env */
+ for (i = 0; i < 6; i++)
+ dev->enetaddr[i] = 0;
+
+ eth_register(dev);
+
+ /* Reset the MAC */
+ priv->regs->maccfg1 |= MACCFG1_SOFT_RESET;
+ priv->regs->maccfg1 &= ~(MACCFG1_SOFT_RESET);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+ && !defined(BITBANGMII)
+ miiphy_register(dev->name, tsec_miiphy_read, tsec_miiphy_write);
+#endif
+
+ /* Try to initialize PHY here, and return */
+ return init_phy(dev);
+}
+
+/* Initializes data structures and registers for the controller,
+ * and brings the interface up. Returns the link status, meaning
+ * that it returns success if the link is up, failure otherwise.
+ * This allows u-boot to find the first active controller.
+ */
+int tsec_init(struct eth_device *dev, bd_t * bd)
+{
+ uint tempval;
+ char tmpbuf[MAC_ADDR_LEN];
+ int i;
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ volatile tsec_t *regs = priv->regs;
+
+ /* Make sure the controller is stopped */
+ tsec_halt(dev);
+
+ /* Init MACCFG2. Defaults to GMII */
+ regs->maccfg2 = MACCFG2_INIT_SETTINGS;
+
+ /* Init ECNTRL */
+ regs->ecntrl = ECNTRL_INIT_SETTINGS;
+
+ /* Copy the station address into the address registers.
+ * Backwards, because little endian MACS are dumb */
+ for (i = 0; i < MAC_ADDR_LEN; i++) {
+ tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
+ }
+ regs->macstnaddr1 = *((uint *) (tmpbuf));
+
+ tempval = *((uint *) (tmpbuf + 4));
+
+ regs->macstnaddr2 = tempval;
+
+ /* reset the indices to zero */
+ rxIdx = 0;
+ txIdx = 0;
+
+ /* Clear out (for the most part) the other registers */
+ init_registers(regs);
+
+ /* Ready the device for tx/rx */
+ startup_tsec(dev);
+
+ /* If there's no link, fail */
+ return priv->link;
+
+}
+
+/* Write value to the device's PHY through the registers
+ * specified in priv, modifying the register specified in regnum.
+ * It will wait for the write to be done (or for a timeout to
+ * expire) before exiting
+ */
+void write_phy_reg(struct tsec_private *priv, uint regnum, uint value)
+{
+ volatile tsec_t *regbase = priv->phyregs;
+ uint phyid = priv->phyaddr;
+ int timeout = 1000000;
+
+ regbase->miimadd = (phyid << 8) | regnum;
+ regbase->miimcon = value;
+ asm("sync");
+
+ timeout = 1000000;
+ while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ;
+}
+
+/* Reads register regnum on the device's PHY through the
+ * registers specified in priv. It lowers and raises the read
+ * command, and waits for the data to become valid (miimind
+ * notvalid bit cleared), and the bus to cease activity (miimind
+ * busy bit cleared), and then returns the value
+ */
+uint read_phy_reg(struct tsec_private *priv, uint regnum)
+{
+ uint value;
+ volatile tsec_t *regbase = priv->phyregs;
+ uint phyid = priv->phyaddr;
+
+ /* Put the address of the phy, and the register
+ * number into MIIMADD */
+ regbase->miimadd = (phyid << 8) | regnum;
+
+ /* Clear the command register, and wait */
+ regbase->miimcom = 0;
+ asm("sync");
+
+ /* Initiate a read command, and wait */
+ regbase->miimcom = MIIM_READ_COMMAND;
+ asm("sync");
+
+ /* Wait for the the indication that the read is done */
+ while ((regbase->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY))) ;
+
+ /* Grab the value read from the PHY */
+ value = regbase->miimstat;
+
+ return value;
+}
+
+/* Discover which PHY is attached to the device, and configure it
+ * properly. If the PHY is not recognized, then return 0
+ * (failure). Otherwise, return 1
+ */
+static int init_phy(struct eth_device *dev)
+{
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ struct phy_info *curphy;
+ volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
+
+ /* Assign a Physical address to the TBI */
+ regs->tbipa = CFG_TBIPA_VALUE;
+ regs = (volatile tsec_t *)(TSEC_BASE_ADDR + TSEC_SIZE);
+ regs->tbipa = CFG_TBIPA_VALUE;
+ asm("sync");
+
+ /* Reset MII (due to new addresses) */
+ priv->phyregs->miimcfg = MIIMCFG_RESET;
+ asm("sync");
+ priv->phyregs->miimcfg = MIIMCFG_INIT_VALUE;
+ asm("sync");
+ while (priv->phyregs->miimind & MIIMIND_BUSY) ;
+
+ if (0 == relocated)
+ relocate_cmds();
+
+ /* Get the cmd structure corresponding to the attached
+ * PHY */
+ curphy = get_phy_info(dev);
+
+ if (curphy == NULL) {
+ priv->phyinfo = NULL;
+ printf("%s: No PHY found\n", dev->name);
+
+ return 0;
+ }
+
+ priv->phyinfo = curphy;
+
+ phy_run_commands(priv, priv->phyinfo->config);
+
+ return 1;
+}
+
+/*
+ * Returns which value to write to the control register.
+ * For 10/100, the value is slightly different
+ */
+uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
+{
+ if (priv->flags & TSEC_GIGABIT)
+ return MIIM_CONTROL_INIT;
+ else
+ return MIIM_CR_INIT;
+}
+
+/* Parse the status register for link, and then do
+ * auto-negotiation
+ */
+uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
+{
+ /*
+ * Wait if the link is up, and autonegotiation is in progress
+ * (ie - we're capable and it's not done)
+ */
+ mii_reg = read_phy_reg(priv, MIIM_STATUS);
+ if ((mii_reg & MIIM_STATUS_LINK) && (mii_reg & PHY_BMSR_AUTN_ABLE)
+ && !(mii_reg & PHY_BMSR_AUTN_COMP)) {
+ int i = 0;
+
+ puts("Waiting for PHY auto negotiation to complete");
+ while (!(mii_reg & PHY_BMSR_AUTN_COMP)) {
+ /*
+ * Timeout reached ?
+ */
+ if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+ puts(" TIMEOUT !\n");
+ priv->link = 0;
+ return 0;
+ }
+
+ if ((i++ % 1000) == 0) {
+ putc('.');
+ }
+ udelay(1000); /* 1 ms */
+ mii_reg = read_phy_reg(priv, MIIM_STATUS);
+ }
+ puts(" done\n");
+ priv->link = 1;
+ udelay(500000); /* another 500 ms (results in faster booting) */
+ } else {
+ if (mii_reg & MIIM_STATUS_LINK)
+ priv->link = 1;
+ else
+ priv->link = 0;
+ }
+
+ return 0;
+}
+
+/* Generic function which updates the speed and duplex. If
+ * autonegotiation is enabled, it uses the AND of the link
+ * partner's advertised capabilities and our advertised
+ * capabilities. If autonegotiation is disabled, we use the
+ * appropriate bits in the control register.
+ *
+ * Stolen from Linux's mii.c and phy_device.c
+ */
+uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
+{
+ /* We're using autonegotiation */
+ if (mii_reg & PHY_BMSR_AUTN_ABLE) {
+ uint lpa = 0;
+ uint gblpa = 0;
+
+ /* Check for gigabit capability */
+ if (mii_reg & PHY_BMSR_EXT) {
+ /* We want a list of states supported by
+ * both PHYs in the link
+ */
+ gblpa = read_phy_reg(priv, PHY_1000BTSR);
+ gblpa &= read_phy_reg(priv, PHY_1000BTCR) << 2;
+ }
+
+ /* Set the baseline so we only have to set them
+ * if they're different
+ */
+ priv->speed = 10;
+ priv->duplexity = 0;
+
+ /* Check the gigabit fields */
+ if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
+ priv->speed = 1000;
+
+ if (gblpa & PHY_1000BTSR_1000FD)
+ priv->duplexity = 1;
+
+ /* We're done! */
+ return 0;
+ }
+
+ lpa = read_phy_reg(priv, PHY_ANAR);
+ lpa &= read_phy_reg(priv, PHY_ANLPAR);
+
+ if (lpa & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) {
+ priv->speed = 100;
+
+ if (lpa & PHY_ANLPAR_TXFD)
+ priv->duplexity = 1;
+
+ } else if (lpa & PHY_ANLPAR_10FD)
+ priv->duplexity = 1;
+ } else {
+ uint bmcr = read_phy_reg(priv, PHY_BMCR);
+
+ priv->speed = 10;
+ priv->duplexity = 0;
+
+ if (bmcr & PHY_BMCR_DPLX)
+ priv->duplexity = 1;
+
+ if (bmcr & PHY_BMCR_1000_MBPS)
+ priv->speed = 1000;
+ else if (bmcr & PHY_BMCR_100_MBPS)
+ priv->speed = 100;
+ }
+
+ return 0;
+}
+
+/*
+ * Parse the BCM54xx status register for speed and duplex information.
+ * The linux sungem_phy has this information, but in a table format.
+ */
+uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
+{
+
+ switch((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >> MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT){
+
+ case 1:
+ printf("Enet starting in 10BT/HD\n");
+ priv->duplexity = 0;
+ priv->speed = 10;
+ break;
+
+ case 2:
+ printf("Enet starting in 10BT/FD\n");
+ priv->duplexity = 1;
+ priv->speed = 10;
+ break;
+
+ case 3:
+ printf("Enet starting in 100BT/HD\n");
+ priv->duplexity = 0;
+ priv->speed = 100;
+ break;
+
+ case 5:
+ printf("Enet starting in 100BT/FD\n");
+ priv->duplexity = 1;
+ priv->speed = 100;
+ break;
+
+ case 6:
+ printf("Enet starting in 1000BT/HD\n");
+ priv->duplexity = 0;
+ priv->speed = 1000;
+ break;
+
+ case 7:
+ printf("Enet starting in 1000BT/FD\n");
+ priv->duplexity = 1;
+ priv->speed = 1000;
+ break;
+
+ default:
+ printf("Auto-neg error, defaulting to 10BT/HD\n");
+ priv->duplexity = 0;
+ priv->speed = 10;
+ break;
+ }
+
+ return 0;
+
+}
+/* Parse the 88E1011's status register for speed and duplex
+ * information
+ */
+uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv)
+{
+ uint speed;
+
+ mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS);
+
+ if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) &&
+ !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
+ int i = 0;
+
+ puts("Waiting for PHY realtime link");
+ while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
+ /* Timeout reached ? */
+ if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+ puts(" TIMEOUT !\n");
+ priv->link = 0;
+ break;
+ }
+
+ if ((i++ % 1000) == 0) {
+ putc('.');
+ }
+ udelay(1000); /* 1 ms */
+ mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS);
+ }
+ puts(" done\n");
+ udelay(500000); /* another 500 ms (results in faster booting) */
+ } else {
+ if (mii_reg & MIIM_88E1011_PHYSTAT_LINK)
+ priv->link = 1;
+ else
+ priv->link = 0;
+ }
+
+ if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
+ priv->duplexity = 1;
+ else
+ priv->duplexity = 0;
+
+ speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED);
+
+ switch (speed) {
+ case MIIM_88E1011_PHYSTAT_GBIT:
+ priv->speed = 1000;
+ break;
+ case MIIM_88E1011_PHYSTAT_100:
+ priv->speed = 100;
+ break;
+ default:
+ priv->speed = 10;
+ }
+
+ return 0;
+}
+
+/* Parse the cis8201's status register for speed and duplex
+ * information
+ */
+uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv)
+{
+ uint speed;
+
+ if (mii_reg & MIIM_CIS8201_AUXCONSTAT_DUPLEX)
+ priv->duplexity = 1;
+ else
+ priv->duplexity = 0;
+
+ speed = mii_reg & MIIM_CIS8201_AUXCONSTAT_SPEED;
+ switch (speed) {
+ case MIIM_CIS8201_AUXCONSTAT_GBIT:
+ priv->speed = 1000;
+ break;
+ case MIIM_CIS8201_AUXCONSTAT_100:
+ priv->speed = 100;
+ break;
+ default:
+ priv->speed = 10;
+ break;
+ }
+
+ return 0;
+}
+
+/* Parse the vsc8244's status register for speed and duplex
+ * information
+ */
+uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv)
+{
+ uint speed;
+
+ if (mii_reg & MIIM_VSC8244_AUXCONSTAT_DUPLEX)
+ priv->duplexity = 1;
+ else
+ priv->duplexity = 0;
+
+ speed = mii_reg & MIIM_VSC8244_AUXCONSTAT_SPEED;
+ switch (speed) {
+ case MIIM_VSC8244_AUXCONSTAT_GBIT:
+ priv->speed = 1000;
+ break;
+ case MIIM_VSC8244_AUXCONSTAT_100:
+ priv->speed = 100;
+ break;
+ default:
+ priv->speed = 10;
+ break;
+ }
+
+ return 0;
+}
+
+/* Parse the DM9161's status register for speed and duplex
+ * information
+ */
+uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
+{
+ if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
+ priv->speed = 100;
+ else
+ priv->speed = 10;
+
+ if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
+ priv->duplexity = 1;
+ else
+ priv->duplexity = 0;
+
+ return 0;
+}
+
+/*
+ * Hack to write all 4 PHYs with the LED values
+ */
+uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
+{
+ uint phyid;
+ volatile tsec_t *regbase = priv->phyregs;
+ int timeout = 1000000;
+
+ for (phyid = 0; phyid < 4; phyid++) {
+ regbase->miimadd = (phyid << 8) | mii_reg;
+ regbase->miimcon = MIIM_CIS8204_SLEDCON_INIT;
+ asm("sync");
+
+ timeout = 1000000;
+ while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ;
+ }
+
+ return MIIM_CIS8204_SLEDCON_INIT;
+}
+
+uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
+{
+ if (priv->flags & TSEC_REDUCED)
+ return MIIM_CIS8204_EPHYCON_INIT | MIIM_CIS8204_EPHYCON_RGMII;
+ else
+ return MIIM_CIS8204_EPHYCON_INIT;
+}
+
+/* Initialized required registers to appropriate values, zeroing
+ * those we don't care about (unless zero is bad, in which case,
+ * choose a more appropriate value)
+ */
+static void init_registers(volatile tsec_t * regs)
+{
+ /* Clear IEVENT */
+ regs->ievent = IEVENT_INIT_CLEAR;
+
+ regs->imask = IMASK_INIT_CLEAR;
+
+ regs->hash.iaddr0 = 0;
+ regs->hash.iaddr1 = 0;
+ regs->hash.iaddr2 = 0;
+ regs->hash.iaddr3 = 0;
+ regs->hash.iaddr4 = 0;
+ regs->hash.iaddr5 = 0;
+ regs->hash.iaddr6 = 0;
+ regs->hash.iaddr7 = 0;
+
+ regs->hash.gaddr0 = 0;
+ regs->hash.gaddr1 = 0;
+ regs->hash.gaddr2 = 0;
+ regs->hash.gaddr3 = 0;
+ regs->hash.gaddr4 = 0;
+ regs->hash.gaddr5 = 0;
+ regs->hash.gaddr6 = 0;
+ regs->hash.gaddr7 = 0;
+
+ regs->rctrl = 0x00000000;
+
+ /* Init RMON mib registers */
+ memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t));
+
+ regs->rmon.cam1 = 0xffffffff;
+ regs->rmon.cam2 = 0xffffffff;
+
+ regs->mrblr = MRBLR_INIT_SETTINGS;
+
+ regs->minflr = MINFLR_INIT_SETTINGS;
+
+ regs->attr = ATTR_INIT_SETTINGS;
+ regs->attreli = ATTRELI_INIT_SETTINGS;
+
+}
+
+/* Configure maccfg2 based on negotiated speed and duplex
+ * reported by PHY handling code
+ */
+static void adjust_link(struct eth_device *dev)
+{
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ volatile tsec_t *regs = priv->regs;
+
+ if (priv->link) {
+ if (priv->duplexity != 0)
+ regs->maccfg2 |= MACCFG2_FULL_DUPLEX;
+ else
+ regs->maccfg2 &= ~(MACCFG2_FULL_DUPLEX);
+
+ switch (priv->speed) {
+ case 1000:
+ regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF))
+ | MACCFG2_GMII);
+ break;
+ case 100:
+ case 10:
+ regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF))
+ | MACCFG2_MII);
+
+ /* Set R100 bit in all modes although
+ * it is only used in RGMII mode
+ */
+ if (priv->speed == 100)
+ regs->ecntrl |= ECNTRL_R100;
+ else
+ regs->ecntrl &= ~(ECNTRL_R100);
+ break;
+ default:
+ printf("%s: Speed was bad\n", dev->name);
+ break;
+ }
+
+ printf("Speed: %d, %s duplex\n", priv->speed,
+ (priv->duplexity) ? "full" : "half");
+
+ } else {
+ printf("%s: No link.\n", dev->name);
+ }
+}
+
+/* Set up the buffers and their descriptors, and bring up the
+ * interface
+ */
+static void startup_tsec(struct eth_device *dev)
+{
+ int i;
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ volatile tsec_t *regs = priv->regs;
+
+ /* Point to the buffer descriptors */
+ regs->tbase = (unsigned int)(&rtx.txbd[txIdx]);
+ regs->rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
+
+ /* Initialize the Rx Buffer descriptors */
+ for (i = 0; i < PKTBUFSRX; i++) {
+ rtx.rxbd[i].status = RXBD_EMPTY;
+ rtx.rxbd[i].length = 0;
+ rtx.rxbd[i].bufPtr = (uint) NetRxPackets[i];
+ }
+ rtx.rxbd[PKTBUFSRX - 1].status |= RXBD_WRAP;
+
+ /* Initialize the TX Buffer Descriptors */
+ for (i = 0; i < TX_BUF_CNT; i++) {
+ rtx.txbd[i].status = 0;
+ rtx.txbd[i].length = 0;
+ rtx.txbd[i].bufPtr = 0;
+ }
+ rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
+
+ /* Start up the PHY */
+ if(priv->phyinfo)
+ phy_run_commands(priv, priv->phyinfo->startup);
+
+ adjust_link(dev);
+
+ /* Enable Transmit and Receive */
+ regs->maccfg1 |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
+
+ /* Tell the DMA it is clear to go */
+ regs->dmactrl |= DMACTRL_INIT_SETTINGS;
+ regs->tstat = TSTAT_CLEAR_THALT;
+ regs->rstat = RSTAT_CLEAR_RHALT;
+ regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
+}
+
+/* This returns the status bits of the device. The return value
+ * is never checked, and this is what the 8260 driver did, so we
+ * do the same. Presumably, this would be zero if there were no
+ * errors
+ */
+static int tsec_send(struct eth_device *dev, volatile void *packet, int length)
+{
+ int i;
+ int result = 0;
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ volatile tsec_t *regs = priv->regs;
+
+ /* Find an empty buffer descriptor */
+ for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
+ if (i >= TOUT_LOOP) {
+ debug("%s: tsec: tx buffers full\n", dev->name);
+ return result;
+ }
+ }
+
+ rtx.txbd[txIdx].bufPtr = (uint) packet;
+ rtx.txbd[txIdx].length = length;
+ rtx.txbd[txIdx].status |=
+ (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
+
+ /* Tell the DMA to go */
+ regs->tstat = TSTAT_CLEAR_THALT;
+
+ /* Wait for buffer to be transmitted */
+ for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
+ if (i >= TOUT_LOOP) {
+ debug("%s: tsec: tx error\n", dev->name);
+ return result;
+ }
+ }
+
+ txIdx = (txIdx + 1) % TX_BUF_CNT;
+ result = rtx.txbd[txIdx].status & TXBD_STATS;
+
+ return result;
+}
+
+static int tsec_recv(struct eth_device *dev)
+{
+ int length;
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ volatile tsec_t *regs = priv->regs;
+
+ while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
+
+ length = rtx.rxbd[rxIdx].length;
+
+ /* Send the packet up if there were no errors */
+ if (!(rtx.rxbd[rxIdx].status & RXBD_STATS)) {
+ NetReceive(NetRxPackets[rxIdx], length - 4);
+ } else {
+ printf("Got error %x\n",
+ (rtx.rxbd[rxIdx].status & RXBD_STATS));
+ }
+
+ rtx.rxbd[rxIdx].length = 0;
+
+ /* Set the wrap bit if this is the last element in the list */
+ rtx.rxbd[rxIdx].status =
+ RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
+
+ rxIdx = (rxIdx + 1) % PKTBUFSRX;
+ }
+
+ if (regs->ievent & IEVENT_BSY) {
+ regs->ievent = IEVENT_BSY;
+ regs->rstat = RSTAT_CLEAR_RHALT;
+ }
+
+ return -1;
+
+}
+
+/* Stop the interface */
+static void tsec_halt(struct eth_device *dev)
+{
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ volatile tsec_t *regs = priv->regs;
+
+ regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
+ regs->dmactrl |= (DMACTRL_GRS | DMACTRL_GTS);
+
+ while (!(regs->ievent & (IEVENT_GRSC | IEVENT_GTSC))) ;
+
+ regs->maccfg1 &= ~(MACCFG1_TX_EN | MACCFG1_RX_EN);
+
+ /* Shut down the PHY, as needed */
+ if(priv->phyinfo)
+ phy_run_commands(priv, priv->phyinfo->shutdown);
+}
+
+struct phy_info phy_info_M88E1149S = {
+ 0x1410ca,
+ "Marvell 88E1149S",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {0x1d, 0x1f, NULL},
+ {0x1e, 0x200c, NULL},
+ {0x1d, 0x5, NULL},
+ {0x1e, 0x0, NULL},
+ {0x1e, 0x100, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_88E1011_PHY_STATUS, miim_read,
+ &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+
+/* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
+struct phy_info phy_info_BCM5461S = {
+ 0x02060c1, /* 5461 ID */
+ "Broadcom BCM5461S",
+ 0, /* not clear to me what minor revisions we can shift away */
+ (struct phy_cmd[]) { /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
+};
+
+struct phy_info phy_info_BCM5464S = {
+ 0x02060b1, /* 5464 ID */
+ "Broadcom BCM5464S",
+ 0, /* not clear to me what minor revisions we can shift away */
+ (struct phy_cmd[]) { /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
+};
+
+struct phy_info phy_info_M88E1011S = {
+ 0x01410c6,
+ "Marvell 88E1011S",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {0x1d, 0x1f, NULL},
+ {0x1e, 0x200c, NULL},
+ {0x1d, 0x5, NULL},
+ {0x1e, 0x0, NULL},
+ {0x1e, 0x100, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_88E1011_PHY_STATUS, miim_read,
+ &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+
+struct phy_info phy_info_M88E1111S = {
+ 0x01410cc,
+ "Marvell 88E1111S",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_88E1011_PHY_STATUS, miim_read,
+ &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+
+static unsigned int m88e1145_setmode(uint mii_reg, struct tsec_private *priv)
+{
+ uint mii_data = read_phy_reg(priv, mii_reg);
+
+ /* Setting MIIM_88E1145_PHY_EXT_CR */
+ if (priv->flags & TSEC_REDUCED)
+ return mii_data |
+ MIIM_M88E1145_RGMII_RX_DELAY | MIIM_M88E1145_RGMII_TX_DELAY;
+ else
+ return mii_data;
+}
+
+static struct phy_info phy_info_M88E1145 = {
+ 0x01410cd,
+ "Marvell 88E1145",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ /* Reset the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+
+ /* Errata E0, E1 */
+ {29, 0x001b, NULL},
+ {30, 0x418f, NULL},
+ {29, 0x0016, NULL},
+ {30, 0xa2da, NULL},
+
+ /* Configure the PHY */
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_88E1011_PHY_SCR, MIIM_88E1011_PHY_MDI_X_AUTO,
+ NULL},
+ {MIIM_88E1145_PHY_EXT_CR, 0, &m88e1145_setmode},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ {MIIM_88E1111_PHY_LED_CONTROL,
+ MIIM_88E1111_PHY_LED_DIRECT, NULL},
+ /* Read the Status */
+ {MIIM_88E1011_PHY_STATUS, miim_read,
+ &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+
+struct phy_info phy_info_cis8204 = {
+ 0x3f11,
+ "Cicada Cis8204",
+ 6,
+ (struct phy_cmd[]){ /* config */
+ /* Override PHY config settings */
+ {MIIM_CIS8201_AUX_CONSTAT,
+ MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT,
+ &mii_cis8204_fixled},
+ {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT,
+ &mii_cis8204_setmode},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_CIS8201_AUX_CONSTAT, miim_read,
+ &mii_parse_cis8201},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+
+/* Cicada 8201 */
+struct phy_info phy_info_cis8201 = {
+ 0xfc41,
+ "CIS8201",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ /* Override PHY config settings */
+ {MIIM_CIS8201_AUX_CONSTAT,
+ MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
+ /* Set up the interface mode */
+ {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT,
+ NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_CIS8201_AUX_CONSTAT, miim_read,
+ &mii_parse_cis8201},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+struct phy_info phy_info_VSC8244 = {
+ 0x3f1b,
+ "Vitesse VSC8244",
+ 6,
+ (struct phy_cmd[]){ /* config */
+ /* Override PHY config settings */
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_VSC8244_AUX_CONSTAT, miim_read,
+ &mii_parse_vsc8244},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+
+struct phy_info phy_info_dm9161 = {
+ 0x0181b88,
+ "Davicom DM9161E",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ {MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
+ /* Do not bypass the scrambler/descrambler */
+ {MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
+ /* Clear 10BTCSR to default */
+ {MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT,
+ NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CR_INIT, NULL},
+ /* Restart Auto Negotiation */
+ {MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_DM9161_SCSR, miim_read,
+ &mii_parse_dm9161_scsr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+/* a generic flavor. */
+struct phy_info phy_info_generic = {
+ 0,
+ "Unknown/Generic PHY",
+ 32,
+ (struct phy_cmd[]) { /* config */
+ {PHY_BMCR, PHY_BMCR_RESET, NULL},
+ {PHY_BMCR, PHY_BMCR_AUTON|PHY_BMCR_RST_NEG, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ {PHY_BMSR, miim_read, NULL},
+ {PHY_BMSR, miim_read, &mii_parse_sr},
+ {PHY_BMSR, miim_read, &mii_parse_link},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ }
+};
+
+
+uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
+{
+ unsigned int speed;
+ if (priv->link) {
+ speed = mii_reg & MIIM_LXT971_SR2_SPEED_MASK;
+
+ switch (speed) {
+ case MIIM_LXT971_SR2_10HDX:
+ priv->speed = 10;
+ priv->duplexity = 0;
+ break;
+ case MIIM_LXT971_SR2_10FDX:
+ priv->speed = 10;
+ priv->duplexity = 1;
+ break;
+ case MIIM_LXT971_SR2_100HDX:
+ priv->speed = 100;
+ priv->duplexity = 0;
+ break;
+ default:
+ priv->speed = 100;
+ priv->duplexity = 1;
+ }
+ } else {
+ priv->speed = 0;
+ priv->duplexity = 0;
+ }
+
+ return 0;
+}
+
+static struct phy_info phy_info_lxt971 = {
+ 0x0001378e,
+ "LXT971",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ {MIIM_CR, MIIM_CR_INIT, mii_cr_init}, /* autonegotiate */
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup - enable interrupts */
+ /* { 0x12, 0x00f2, NULL }, */
+ {MIIM_STATUS, miim_read, NULL},
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ {MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown - disable interrupts */
+ {miim_end,}
+ },
+};
+
+/* Parse the DP83865's link and auto-neg status register for speed and duplex
+ * information
+ */
+uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
+{
+ switch (mii_reg & MIIM_DP83865_SPD_MASK) {
+
+ case MIIM_DP83865_SPD_1000:
+ priv->speed = 1000;
+ break;
+
+ case MIIM_DP83865_SPD_100:
+ priv->speed = 100;
+ break;
+
+ default:
+ priv->speed = 10;
+ break;
+
+ }
+
+ if (mii_reg & MIIM_DP83865_DPX_FULL)
+ priv->duplexity = 1;
+ else
+ priv->duplexity = 0;
+
+ return 0;
+}
+
+struct phy_info phy_info_dp83865 = {
+ 0x20005c7,
+ "NatSemi DP83865",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ {MIIM_CONTROL, MIIM_DP83865_CR_INIT, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the link and auto-neg status */
+ {MIIM_DP83865_LANR, miim_read,
+ &mii_parse_dp83865_lanr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+
+struct phy_info *phy_info[] = {
+ &phy_info_cis8204,
+ &phy_info_cis8201,
+ &phy_info_BCM5461S,
+ &phy_info_BCM5464S,
+ &phy_info_M88E1011S,
+ &phy_info_M88E1111S,
+ &phy_info_M88E1145,
+ &phy_info_M88E1149S,
+ &phy_info_dm9161,
+ &phy_info_lxt971,
+ &phy_info_VSC8244,
+ &phy_info_dp83865,
+ &phy_info_generic,
+ NULL
+};
+
+/* Grab the identifier of the device's PHY, and search through
+ * all of the known PHYs to see if one matches. If so, return
+ * it, if not, return NULL
+ */
+struct phy_info *get_phy_info(struct eth_device *dev)
+{
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ uint phy_reg, phy_ID;
+ int i;
+ struct phy_info *theInfo = NULL;
+
+ /* Grab the bits from PHYIR1, and put them in the upper half */
+ phy_reg = read_phy_reg(priv, MIIM_PHYIR1);
+ phy_ID = (phy_reg & 0xffff) << 16;
+
+ /* Grab the bits from PHYIR2, and put them in the lower half */
+ phy_reg = read_phy_reg(priv, MIIM_PHYIR2);
+ phy_ID |= (phy_reg & 0xffff);
+
+ /* loop through all the known PHY types, and find one that */
+ /* matches the ID we read from the PHY. */
+ for (i = 0; phy_info[i]; i++) {
+ if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) {
+ theInfo = phy_info[i];
+ break;
+ }
+ }
+
+ if (theInfo == NULL) {
+ printf("%s: PHY id %x is not supported!\n", dev->name, phy_ID);
+ return NULL;
+ } else {
+ debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID);
+ }
+
+ return theInfo;
+}
+
+/* Execute the given series of commands on the given device's
+ * PHY, running functions as necessary
+ */
+void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
+{
+ int i;
+ uint result;
+ volatile tsec_t *phyregs = priv->phyregs;
+
+ phyregs->miimcfg = MIIMCFG_RESET;
+
+ phyregs->miimcfg = MIIMCFG_INIT_VALUE;
+
+ while (phyregs->miimind & MIIMIND_BUSY) ;
+
+ for (i = 0; cmd->mii_reg != miim_end; i++) {
+ if (cmd->mii_data == miim_read) {
+ result = read_phy_reg(priv, cmd->mii_reg);
+
+ if (cmd->funct != NULL)
+ (*(cmd->funct)) (result, priv);
+
+ } else {
+ if (cmd->funct != NULL)
+ result = (*(cmd->funct)) (cmd->mii_reg, priv);
+ else
+ result = cmd->mii_data;
+
+ write_phy_reg(priv, cmd->mii_reg, result);
+
+ }
+ cmd++;
+ }
+}
+
+/* Relocate the function pointers in the phy cmd lists */
+static void relocate_cmds(void)
+{
+ struct phy_cmd **cmdlistptr;
+ struct phy_cmd *cmd;
+ int i, j, k;
+
+ for (i = 0; phy_info[i]; i++) {
+ /* First thing's first: relocate the pointers to the
+ * PHY command structures (the structs were done) */
+ phy_info[i] = (struct phy_info *)((uint) phy_info[i]
+ + gd->reloc_off);
+ phy_info[i]->name += gd->reloc_off;
+ phy_info[i]->config =
+ (struct phy_cmd *)((uint) phy_info[i]->config
+ + gd->reloc_off);
+ phy_info[i]->startup =
+ (struct phy_cmd *)((uint) phy_info[i]->startup
+ + gd->reloc_off);
+ phy_info[i]->shutdown =
+ (struct phy_cmd *)((uint) phy_info[i]->shutdown
+ + gd->reloc_off);
+
+ cmdlistptr = &phy_info[i]->config;
+ j = 0;
+ for (; cmdlistptr <= &phy_info[i]->shutdown; cmdlistptr++) {
+ k = 0;
+ for (cmd = *cmdlistptr;
+ cmd->mii_reg != miim_end;
+ cmd++) {
+ /* Only relocate non-NULL pointers */
+ if (cmd->funct)
+ cmd->funct += gd->reloc_off;
+
+ k++;
+ }
+ j++;
+ }
+ }
+
+ relocated = 1;
+}
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+ && !defined(BITBANGMII)
+
+struct tsec_private *get_priv_for_phy(unsigned char phyaddr)
+{
+ int i;
+
+ for (i = 0; i < MAXCONTROLLERS; i++) {
+ if (privlist[i]->phyaddr == phyaddr)
+ return privlist[i];
+ }
+
+ return NULL;
+}
+
+/*
+ * Read a MII PHY register.
+ *
+ * Returns:
+ * 0 on success
+ */
+static int tsec_miiphy_read(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value)
+{
+ unsigned short ret;
+ struct tsec_private *priv = get_priv_for_phy(addr);
+
+ if (NULL == priv) {
+ printf("Can't read PHY at address %d\n", addr);
+ return -1;
+ }
+
+ ret = (unsigned short)read_phy_reg(priv, reg);
+ *value = ret;
+
+ return 0;
+}
+
+/*
+ * Write a MII PHY register.
+ *
+ * Returns:
+ * 0 on success
+ */
+static int tsec_miiphy_write(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value)
+{
+ struct tsec_private *priv = get_priv_for_phy(addr);
+
+ if (NULL == priv) {
+ printf("Can't write PHY at address %d\n", addr);
+ return -1;
+ }
+
+ write_phy_reg(priv, reg, value);
+
+ return 0;
+}
+
+#endif
+
+#ifdef CONFIG_MCAST_TFTP
+
+/* CREDITS: linux gianfar driver, slightly adjusted... thanx. */
+
+/* Set the appropriate hash bit for the given addr */
+
+/* The algorithm works like so:
+ * 1) Take the Destination Address (ie the multicast address), and
+ * do a CRC on it (little endian), and reverse the bits of the
+ * result.
+ * 2) Use the 8 most significant bits as a hash into a 256-entry
+ * table. The table is controlled through 8 32-bit registers:
+ * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is
+ * gaddr7. This means that the 3 most significant bits in the
+ * hash index which gaddr register to use, and the 5 other bits
+ * indicate which bit (assuming an IBM numbering scheme, which
+ * for PowerPC (tm) is usually the case) in the tregister holds
+ * the entry. */
+static int
+tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set)
+{
+ struct tsec_private *priv = privlist[1];
+ volatile tsec_t *regs = priv->regs;
+ volatile u32 *reg_array, value;
+ u8 result, whichbit, whichreg;
+
+ result = (u8)((ether_crc(MAC_ADDR_LEN,mcast_mac) >> 24) & 0xff);
+ whichbit = result & 0x1f; /* the 5 LSB = which bit to set */
+ whichreg = result >> 5; /* the 3 MSB = which reg to set it in */
+ value = (1 << (31-whichbit));
+
+ reg_array = &(regs->hash.gaddr0);
+
+ if (set) {
+ reg_array[whichreg] |= value;
+ } else {
+ reg_array[whichreg] &= ~value;
+ }
+ return 0;
+}
+#endif /* Multicast TFTP ? */
+
+#endif /* CONFIG_TSEC_ENET */
diff --git a/drivers/net/tsec.h b/drivers/net/tsec.h
new file mode 100644
index 0000000..2f0092a
--- /dev/null
+++ b/drivers/net/tsec.h
@@ -0,0 +1,563 @@
+/*
+ * tsec.h
+ *
+ * Driver for the Motorola Triple Speed Ethernet Controller
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2004, 2007 Freescale Semiconductor, Inc.
+ * (C) Copyright 2003, Motorola, Inc.
+ * maintained by Xianghua Xiao (x.xiao@motorola.com)
+ * author Andy Fleming
+ *
+ */
+
+#ifndef __TSEC_H
+#define __TSEC_H
+
+#include <net.h>
+#include <config.h>
+
+#ifndef CFG_TSEC1_OFFSET
+ #define CFG_TSEC1_OFFSET (0x24000)
+#endif
+
+#define TSEC_SIZE 0x01000
+
+/* FIXME: Should these be pushed back to 83xx and 85xx config files? */
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+ #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET)
+#elif defined(CONFIG_MPC83XX)
+ #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET)
+#endif
+
+
+#define MAC_ADDR_LEN 6
+
+/* #define TSEC_TIMEOUT 1000000 */
+#define TSEC_TIMEOUT 1000
+#define TOUT_LOOP 1000000
+
+#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */
+
+/* MAC register bits */
+#define MACCFG1_SOFT_RESET 0x80000000
+#define MACCFG1_RESET_RX_MC 0x00080000
+#define MACCFG1_RESET_TX_MC 0x00040000
+#define MACCFG1_RESET_RX_FUN 0x00020000
+#define MACCFG1_RESET_TX_FUN 0x00010000
+#define MACCFG1_LOOPBACK 0x00000100
+#define MACCFG1_RX_FLOW 0x00000020
+#define MACCFG1_TX_FLOW 0x00000010
+#define MACCFG1_SYNCD_RX_EN 0x00000008
+#define MACCFG1_RX_EN 0x00000004
+#define MACCFG1_SYNCD_TX_EN 0x00000002
+#define MACCFG1_TX_EN 0x00000001
+
+#define MACCFG2_INIT_SETTINGS 0x00007205
+#define MACCFG2_FULL_DUPLEX 0x00000001
+#define MACCFG2_IF 0x00000300
+#define MACCFG2_GMII 0x00000200
+#define MACCFG2_MII 0x00000100
+
+#define ECNTRL_INIT_SETTINGS 0x00001000
+#define ECNTRL_TBI_MODE 0x00000020
+#define ECNTRL_R100 0x00000008
+#define ECNTRL_SGMII_MODE 0x00000002
+
+#define miim_end -2
+#define miim_read -1
+
+#ifndef CFG_TBIPA_VALUE
+ #define CFG_TBIPA_VALUE 0x1f
+#endif
+#define MIIMCFG_INIT_VALUE 0x00000003
+#define MIIMCFG_RESET 0x80000000
+
+#define MIIMIND_BUSY 0x00000001
+#define MIIMIND_NOTVALID 0x00000004
+
+#define MIIM_CONTROL 0x00
+#define MIIM_CONTROL_RESET 0x00009140
+#define MIIM_CONTROL_INIT 0x00001140
+#define MIIM_CONTROL_RESTART 0x00001340
+#define MIIM_ANEN 0x00001000
+
+#define MIIM_CR 0x00
+#define MIIM_CR_RST 0x00008000
+#define MIIM_CR_INIT 0x00001000
+
+#define MIIM_STATUS 0x1
+#define MIIM_STATUS_AN_DONE 0x00000020
+#define MIIM_STATUS_LINK 0x0004
+#define PHY_BMSR_AUTN_ABLE 0x0008
+#define PHY_BMSR_AUTN_COMP 0x0020
+
+#define MIIM_PHYIR1 0x2
+#define MIIM_PHYIR2 0x3
+
+#define MIIM_ANAR 0x4
+#define MIIM_ANAR_INIT 0x1e1
+
+#define MIIM_TBI_ANLPBPA 0x5
+#define MIIM_TBI_ANLPBPA_HALF 0x00000040
+#define MIIM_TBI_ANLPBPA_FULL 0x00000020
+
+#define MIIM_TBI_ANEX 0x6
+#define MIIM_TBI_ANEX_NP 0x00000004
+#define MIIM_TBI_ANEX_PRX 0x00000002
+
+#define MIIM_GBIT_CONTROL 0x9
+#define MIIM_GBIT_CONTROL_INIT 0xe00
+
+/* Broadcom BCM54xx -- taken from linux sungem_phy */
+#define MIIM_BCM54xx_AUXSTATUS 0x19
+#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700
+#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
+
+/* Cicada Auxiliary Control/Status Register */
+#define MIIM_CIS8201_AUX_CONSTAT 0x1c
+#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004
+#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020
+#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018
+#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010
+#define MIIM_CIS8201_AUXCONSTAT_100 0x0008
+
+/* Cicada Extended Control Register 1 */
+#define MIIM_CIS8201_EXT_CON1 0x17
+#define MIIM_CIS8201_EXTCON1_INIT 0x0000
+
+/* Cicada 8204 Extended PHY Control Register 1 */
+#define MIIM_CIS8204_EPHY_CON 0x17
+#define MIIM_CIS8204_EPHYCON_INIT 0x0006
+#define MIIM_CIS8204_EPHYCON_RGMII 0x1100
+
+/* Cicada 8204 Serial LED Control Register */
+#define MIIM_CIS8204_SLED_CON 0x1b
+#define MIIM_CIS8204_SLEDCON_INIT 0x1115
+
+#define MIIM_GBIT_CON 0x09
+#define MIIM_GBIT_CON_ADVERT 0x0e00
+
+/* Entry for Vitesse VSC8244 regs starts here */
+/* Vitesse VSC8244 Auxiliary Control/Status Register */
+#define MIIM_VSC8244_AUX_CONSTAT 0x1c
+#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000
+#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020
+#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018
+#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010
+#define MIIM_VSC8244_AUXCONSTAT_100 0x0008
+#define MIIM_CONTROL_INIT_LOOPBACK 0x4000
+
+/* Vitesse VSC8244 Extended PHY Control Register 1 */
+#define MIIM_VSC8244_EPHY_CON 0x17
+#define MIIM_VSC8244_EPHYCON_INIT 0x0006
+
+/* Vitesse VSC8244 Serial LED Control Register */
+#define MIIM_VSC8244_LED_CON 0x1b
+#define MIIM_VSC8244_LEDCON_INIT 0xF011
+
+/* 88E1011 PHY Status Register */
+#define MIIM_88E1011_PHY_STATUS 0x11
+#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
+#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
+#define MIIM_88E1011_PHYSTAT_100 0x4000
+#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
+#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800
+#define MIIM_88E1011_PHYSTAT_LINK 0x0400
+
+#define MIIM_88E1011_PHY_SCR 0x10
+#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060
+
+/* 88E1111 PHY LED Control Register */
+#define MIIM_88E1111_PHY_LED_CONTROL 24
+#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
+#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
+
+/* 88E1145 Extended PHY Specific Control Register */
+#define MIIM_88E1145_PHY_EXT_CR 20
+#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080
+#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002
+
+#define MIIM_88E1145_PHY_PAGE 29
+#define MIIM_88E1145_PHY_CAL_OV 30
+
+
+/* DM9161 Control register values */
+#define MIIM_DM9161_CR_STOP 0x0400
+#define MIIM_DM9161_CR_RSTAN 0x1200
+
+#define MIIM_DM9161_SCR 0x10
+#define MIIM_DM9161_SCR_INIT 0x0610
+
+/* DM9161 Specified Configuration and Status Register */
+#define MIIM_DM9161_SCSR 0x11
+#define MIIM_DM9161_SCSR_100F 0x8000
+#define MIIM_DM9161_SCSR_100H 0x4000
+#define MIIM_DM9161_SCSR_10F 0x2000
+#define MIIM_DM9161_SCSR_10H 0x1000
+
+/* DM9161 10BT Configuration/Status */
+#define MIIM_DM9161_10BTCSR 0x12
+#define MIIM_DM9161_10BTCSR_INIT 0x7800
+
+/* LXT971 Status 2 registers */
+#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */
+#define MIIM_LXT971_SR2_SPEED_MASK 0x4200
+#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */
+#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */
+#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */
+#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */
+
+/* DP83865 Control register values */
+#define MIIM_DP83865_CR_INIT 0x9200
+
+/* DP83865 Link and Auto-Neg Status Register */
+#define MIIM_DP83865_LANR 0x11
+#define MIIM_DP83865_SPD_MASK 0x0018
+#define MIIM_DP83865_SPD_1000 0x0010
+#define MIIM_DP83865_SPD_100 0x0008
+#define MIIM_DP83865_DPX_FULL 0x0002
+
+#define MIIM_READ_COMMAND 0x00000001
+
+#define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN
+
+#define MINFLR_INIT_SETTINGS 0x00000040
+
+#define DMACTRL_INIT_SETTINGS 0x000000c3
+#define DMACTRL_GRS 0x00000010
+#define DMACTRL_GTS 0x00000008
+
+#define TSTAT_CLEAR_THALT 0x80000000
+#define RSTAT_CLEAR_RHALT 0x00800000
+
+
+#define IEVENT_INIT_CLEAR 0xffffffff
+#define IEVENT_BABR 0x80000000
+#define IEVENT_RXC 0x40000000
+#define IEVENT_BSY 0x20000000
+#define IEVENT_EBERR 0x10000000
+#define IEVENT_MSRO 0x04000000
+#define IEVENT_GTSC 0x02000000
+#define IEVENT_BABT 0x01000000
+#define IEVENT_TXC 0x00800000
+#define IEVENT_TXE 0x00400000
+#define IEVENT_TXB 0x00200000
+#define IEVENT_TXF 0x00100000
+#define IEVENT_IE 0x00080000
+#define IEVENT_LC 0x00040000
+#define IEVENT_CRL 0x00020000
+#define IEVENT_XFUN 0x00010000
+#define IEVENT_RXB0 0x00008000
+#define IEVENT_GRSC 0x00000100
+#define IEVENT_RXF0 0x00000080
+
+#define IMASK_INIT_CLEAR 0x00000000
+#define IMASK_TXEEN 0x00400000
+#define IMASK_TXBEN 0x00200000
+#define IMASK_TXFEN 0x00100000
+#define IMASK_RXFEN0 0x00000080
+
+
+/* Default Attribute fields */
+#define ATTR_INIT_SETTINGS 0x000000c0
+#define ATTRELI_INIT_SETTINGS 0x00000000
+
+
+/* TxBD status field bits */
+#define TXBD_READY 0x8000
+#define TXBD_PADCRC 0x4000
+#define TXBD_WRAP 0x2000
+#define TXBD_INTERRUPT 0x1000
+#define TXBD_LAST 0x0800
+#define TXBD_CRC 0x0400
+#define TXBD_DEF 0x0200
+#define TXBD_HUGEFRAME 0x0080
+#define TXBD_LATECOLLISION 0x0080
+#define TXBD_RETRYLIMIT 0x0040
+#define TXBD_RETRYCOUNTMASK 0x003c
+#define TXBD_UNDERRUN 0x0002
+#define TXBD_STATS 0x03ff
+
+/* RxBD status field bits */
+#define RXBD_EMPTY 0x8000
+#define RXBD_RO1 0x4000
+#define RXBD_WRAP 0x2000
+#define RXBD_INTERRUPT 0x1000
+#define RXBD_LAST 0x0800
+#define RXBD_FIRST 0x0400
+#define RXBD_MISS 0x0100
+#define RXBD_BROADCAST 0x0080
+#define RXBD_MULTICAST 0x0040
+#define RXBD_LARGE 0x0020
+#define RXBD_NONOCTET 0x0010
+#define RXBD_SHORT 0x0008
+#define RXBD_CRCERR 0x0004
+#define RXBD_OVERRUN 0x0002
+#define RXBD_TRUNCATED 0x0001
+#define RXBD_STATS 0x003f
+
+typedef struct txbd8
+{
+ ushort status; /* Status Fields */
+ ushort length; /* Buffer length */
+ uint bufPtr; /* Buffer Pointer */
+} txbd8_t;
+
+typedef struct rxbd8
+{
+ ushort status; /* Status Fields */
+ ushort length; /* Buffer Length */
+ uint bufPtr; /* Buffer Pointer */
+} rxbd8_t;
+
+typedef struct rmon_mib
+{
+ /* Transmit and Receive Counters */
+ uint tr64; /* Transmit and Receive 64-byte Frame Counter */
+ uint tr127; /* Transmit and Receive 65-127 byte Frame Counter */
+ uint tr255; /* Transmit and Receive 128-255 byte Frame Counter */
+ uint tr511; /* Transmit and Receive 256-511 byte Frame Counter */
+ uint tr1k; /* Transmit and Receive 512-1023 byte Frame Counter */
+ uint trmax; /* Transmit and Receive 1024-1518 byte Frame Counter */
+ uint trmgv; /* Transmit and Receive 1519-1522 byte Good VLAN Frame */
+ /* Receive Counters */
+ uint rbyt; /* Receive Byte Counter */
+ uint rpkt; /* Receive Packet Counter */
+ uint rfcs; /* Receive FCS Error Counter */
+ uint rmca; /* Receive Multicast Packet (Counter) */
+ uint rbca; /* Receive Broadcast Packet */
+ uint rxcf; /* Receive Control Frame Packet */
+ uint rxpf; /* Receive Pause Frame Packet */
+ uint rxuo; /* Receive Unknown OP Code */
+ uint raln; /* Receive Alignment Error */
+ uint rflr; /* Receive Frame Length Error */
+ uint rcde; /* Receive Code Error */
+ uint rcse; /* Receive Carrier Sense Error */
+ uint rund; /* Receive Undersize Packet */
+ uint rovr; /* Receive Oversize Packet */
+ uint rfrg; /* Receive Fragments */
+ uint rjbr; /* Receive Jabber */
+ uint rdrp; /* Receive Drop */
+ /* Transmit Counters */
+ uint tbyt; /* Transmit Byte Counter */
+ uint tpkt; /* Transmit Packet */
+ uint tmca; /* Transmit Multicast Packet */
+ uint tbca; /* Transmit Broadcast Packet */
+ uint txpf; /* Transmit Pause Control Frame */
+ uint tdfr; /* Transmit Deferral Packet */
+ uint tedf; /* Transmit Excessive Deferral Packet */
+ uint tscl; /* Transmit Single Collision Packet */
+ /* (0x2_n700) */
+ uint tmcl; /* Transmit Multiple Collision Packet */
+ uint tlcl; /* Transmit Late Collision Packet */
+ uint txcl; /* Transmit Excessive Collision Packet */
+ uint tncl; /* Transmit Total Collision */
+
+ uint res2;
+
+ uint tdrp; /* Transmit Drop Frame */
+ uint tjbr; /* Transmit Jabber Frame */
+ uint tfcs; /* Transmit FCS Error */
+ uint txcf; /* Transmit Control Frame */
+ uint tovr; /* Transmit Oversize Frame */
+ uint tund; /* Transmit Undersize Frame */
+ uint tfrg; /* Transmit Fragments Frame */
+ /* General Registers */
+ uint car1; /* Carry Register One */
+ uint car2; /* Carry Register Two */
+ uint cam1; /* Carry Register One Mask */
+ uint cam2; /* Carry Register Two Mask */
+} rmon_mib_t;
+
+typedef struct tsec_hash_regs
+{
+ uint iaddr0; /* Individual Address Register 0 */
+ uint iaddr1; /* Individual Address Register 1 */
+ uint iaddr2; /* Individual Address Register 2 */
+ uint iaddr3; /* Individual Address Register 3 */
+ uint iaddr4; /* Individual Address Register 4 */
+ uint iaddr5; /* Individual Address Register 5 */
+ uint iaddr6; /* Individual Address Register 6 */
+ uint iaddr7; /* Individual Address Register 7 */
+ uint res1[24];
+ uint gaddr0; /* Group Address Register 0 */
+ uint gaddr1; /* Group Address Register 1 */
+ uint gaddr2; /* Group Address Register 2 */
+ uint gaddr3; /* Group Address Register 3 */
+ uint gaddr4; /* Group Address Register 4 */
+ uint gaddr5; /* Group Address Register 5 */
+ uint gaddr6; /* Group Address Register 6 */
+ uint gaddr7; /* Group Address Register 7 */
+ uint res2[24];
+} tsec_hash_t;
+
+typedef struct tsec
+{
+ /* General Control and Status Registers (0x2_n000) */
+ uint res000[4];
+
+ uint ievent; /* Interrupt Event */
+ uint imask; /* Interrupt Mask */
+ uint edis; /* Error Disabled */
+ uint res01c;
+ uint ecntrl; /* Ethernet Control */
+ uint minflr; /* Minimum Frame Length */
+ uint ptv; /* Pause Time Value */
+ uint dmactrl; /* DMA Control */
+ uint tbipa; /* TBI PHY Address */
+
+ uint res034[3];
+ uint res040[48];
+
+ /* Transmit Control and Status Registers (0x2_n100) */
+ uint tctrl; /* Transmit Control */
+ uint tstat; /* Transmit Status */
+ uint res108;
+ uint tbdlen; /* Tx BD Data Length */
+ uint res110[5];
+ uint ctbptr; /* Current TxBD Pointer */
+ uint res128[23];
+ uint tbptr; /* TxBD Pointer */
+ uint res188[30];
+ /* (0x2_n200) */
+ uint res200;
+ uint tbase; /* TxBD Base Address */
+ uint res208[42];
+ uint ostbd; /* Out of Sequence TxBD */
+ uint ostbdp; /* Out of Sequence Tx Data Buffer Pointer */
+ uint res2b8[18];
+
+ /* Receive Control and Status Registers (0x2_n300) */
+ uint rctrl; /* Receive Control */
+ uint rstat; /* Receive Status */
+ uint res308;
+ uint rbdlen; /* RxBD Data Length */
+ uint res310[4];
+ uint res320;
+ uint crbptr; /* Current Receive Buffer Pointer */
+ uint res328[6];
+ uint mrblr; /* Maximum Receive Buffer Length */
+ uint res344[16];
+ uint rbptr; /* RxBD Pointer */
+ uint res388[30];
+ /* (0x2_n400) */
+ uint res400;
+ uint rbase; /* RxBD Base Address */
+ uint res408[62];
+
+ /* MAC Registers (0x2_n500) */
+ uint maccfg1; /* MAC Configuration #1 */
+ uint maccfg2; /* MAC Configuration #2 */
+ uint ipgifg; /* Inter Packet Gap/Inter Frame Gap */
+ uint hafdup; /* Half-duplex */
+ uint maxfrm; /* Maximum Frame */
+ uint res514;
+ uint res518;
+
+ uint res51c;
+
+ uint miimcfg; /* MII Management: Configuration */
+ uint miimcom; /* MII Management: Command */
+ uint miimadd; /* MII Management: Address */
+ uint miimcon; /* MII Management: Control */
+ uint miimstat; /* MII Management: Status */
+ uint miimind; /* MII Management: Indicators */
+
+ uint res538;
+
+ uint ifstat; /* Interface Status */
+ uint macstnaddr1; /* Station Address, part 1 */
+ uint macstnaddr2; /* Station Address, part 2 */
+ uint res548[46];
+
+ /* (0x2_n600) */
+ uint res600[32];
+
+ /* RMON MIB Registers (0x2_n680-0x2_n73c) */
+ rmon_mib_t rmon;
+ uint res740[48];
+
+ /* Hash Function Registers (0x2_n800) */
+ tsec_hash_t hash;
+
+ uint res900[128];
+
+ /* Pattern Registers (0x2_nb00) */
+ uint resb00[62];
+ uint attr; /* Default Attribute Register */
+ uint attreli; /* Default Attribute Extract Length and Index */
+
+ /* TSEC Future Expansion Space (0x2_nc00-0x2_nffc) */
+ uint resc00[256];
+} tsec_t;
+
+#define TSEC_GIGABIT (1)
+
+/* This flag currently only has
+ * meaning if we're using the eTSEC */
+#define TSEC_REDUCED (1 << 1)
+
+struct tsec_private {
+ volatile tsec_t *regs;
+ volatile tsec_t *phyregs;
+ struct phy_info *phyinfo;
+ uint phyaddr;
+ u32 flags;
+ uint link;
+ uint duplexity;
+ uint speed;
+};
+
+
+/*
+ * struct phy_cmd: A command for reading or writing a PHY register
+ *
+ * mii_reg: The register to read or write
+ *
+ * mii_data: For writes, the value to put in the register.
+ * A value of -1 indicates this is a read.
+ *
+ * funct: A function pointer which is invoked for each command.
+ * For reads, this function will be passed the value read
+ * from the PHY, and process it.
+ * For writes, the result of this function will be written
+ * to the PHY register
+ */
+struct phy_cmd {
+ uint mii_reg;
+ uint mii_data;
+ uint (*funct) (uint mii_reg, struct tsec_private* priv);
+};
+
+/* struct phy_info: a structure which defines attributes for a PHY
+ *
+ * id will contain a number which represents the PHY. During
+ * startup, the driver will poll the PHY to find out what its
+ * UID--as defined by registers 2 and 3--is. The 32-bit result
+ * gotten from the PHY will be shifted right by "shift" bits to
+ * discard any bits which may change based on revision numbers
+ * unimportant to functionality
+ *
+ * The struct phy_cmd entries represent pointers to an arrays of
+ * commands which tell the driver what to do to the PHY.
+ */
+struct phy_info {
+ uint id;
+ char *name;
+ uint shift;
+ /* Called to configure the PHY, and modify the controller
+ * based on the results */
+ struct phy_cmd *config;
+
+ /* Called when starting up the controller */
+ struct phy_cmd *startup;
+
+ /* Called when bringing down the controller */
+ struct phy_cmd *shutdown;
+};
+
+#endif /* __TSEC_H */
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
new file mode 100644
index 0000000..524e9da
--- /dev/null
+++ b/drivers/net/tsi108_eth.c
@@ -0,0 +1,1036 @@
+/***********************************************************************
+ *
+ * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description:
+ * Ethernet interface for Tundra TSI108 bridge chip
+ *
+ ***********************************************************************/
+
+#include <config.h>
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) \
+ && defined(CONFIG_TSI108_ETH)
+
+#if !defined(CONFIG_TSI108_ETH_NUM_PORTS) || (CONFIG_TSI108_ETH_NUM_PORTS > 2)
+#error "CONFIG_TSI108_ETH_NUM_PORTS must be defined as 1 or 2"
+#endif
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/cache.h>
+
+#ifdef DEBUG
+#define TSI108_ETH_DEBUG 7
+#else
+#define TSI108_ETH_DEBUG 0
+#endif
+
+#if TSI108_ETH_DEBUG > 0
+#define debug_lev(lev, fmt, args...) \
+if (lev <= TSI108_ETH_DEBUG) \
+printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args)
+#else
+#define debug_lev(lev, fmt, args...) do{}while(0)
+#endif
+
+#define RX_PRINT_ERRORS
+#define TX_PRINT_ERRORS
+
+#define ETH_BASE (CFG_TSI108_CSR_BASE + 0x6000)
+
+#define ETH_PORT_OFFSET 0x400
+
+#define __REG32(base, offset) (*((volatile u32 *)((char *)(base) + (offset))))
+
+#define reg_MAC_CONFIG_1(base) __REG32(base, 0x00000000)
+#define MAC_CONFIG_1_TX_ENABLE (0x00000001)
+#define MAC_CONFIG_1_SYNC_TX_ENABLE (0x00000002)
+#define MAC_CONFIG_1_RX_ENABLE (0x00000004)
+#define MAC_CONFIG_1_SYNC_RX_ENABLE (0x00000008)
+#define MAC_CONFIG_1_TX_FLOW_CONTROL (0x00000010)
+#define MAC_CONFIG_1_RX_FLOW_CONTROL (0x00000020)
+#define MAC_CONFIG_1_LOOP_BACK (0x00000100)
+#define MAC_CONFIG_1_RESET_TX_FUNCTION (0x00010000)
+#define MAC_CONFIG_1_RESET_RX_FUNCTION (0x00020000)
+#define MAC_CONFIG_1_RESET_TX_MAC (0x00040000)
+#define MAC_CONFIG_1_RESET_RX_MAC (0x00080000)
+#define MAC_CONFIG_1_SIM_RESET (0x40000000)
+#define MAC_CONFIG_1_SOFT_RESET (0x80000000)
+
+#define reg_MAC_CONFIG_2(base) __REG32(base, 0x00000004)
+#define MAC_CONFIG_2_FULL_DUPLEX (0x00000001)
+#define MAC_CONFIG_2_CRC_ENABLE (0x00000002)
+#define MAC_CONFIG_2_PAD_CRC (0x00000004)
+#define MAC_CONFIG_2_LENGTH_CHECK (0x00000010)
+#define MAC_CONFIG_2_HUGE_FRAME (0x00000020)
+#define MAC_CONFIG_2_INTERFACE_MODE(val) (((val) & 0x3) << 8)
+#define MAC_CONFIG_2_PREAMBLE_LENGTH(val) (((val) & 0xf) << 12)
+#define INTERFACE_MODE_NIBBLE 1 /* 10/100 Mb/s MII) */
+#define INTERFACE_MODE_BYTE 2 /* 1000 Mb/s GMII/TBI */
+
+#define reg_MAXIMUM_FRAME_LENGTH(base) __REG32(base, 0x00000010)
+
+#define reg_MII_MGMT_CONFIG(base) __REG32(base, 0x00000020)
+#define MII_MGMT_CONFIG_MGMT_CLOCK_SELECT(val) ((val) & 0x7)
+#define MII_MGMT_CONFIG_NO_PREAMBLE (0x00000010)
+#define MII_MGMT_CONFIG_SCAN_INCREMENT (0x00000020)
+#define MII_MGMT_CONFIG_RESET_MGMT (0x80000000)
+
+#define reg_MII_MGMT_COMMAND(base) __REG32(base, 0x00000024)
+#define MII_MGMT_COMMAND_READ_CYCLE (0x00000001)
+#define MII_MGMT_COMMAND_SCAN_CYCLE (0x00000002)
+
+#define reg_MII_MGMT_ADDRESS(base) __REG32(base, 0x00000028)
+#define reg_MII_MGMT_CONTROL(base) __REG32(base, 0x0000002c)
+#define reg_MII_MGMT_STATUS(base) __REG32(base, 0x00000030)
+
+#define reg_MII_MGMT_INDICATORS(base) __REG32(base, 0x00000034)
+#define MII_MGMT_INDICATORS_BUSY (0x00000001)
+#define MII_MGMT_INDICATORS_SCAN (0x00000002)
+#define MII_MGMT_INDICATORS_NOT_VALID (0x00000004)
+
+#define reg_INTERFACE_STATUS(base) __REG32(base, 0x0000003c)
+#define INTERFACE_STATUS_LINK_FAIL (0x00000008)
+#define INTERFACE_STATUS_EXCESS_DEFER (0x00000200)
+
+#define reg_STATION_ADDRESS_1(base) __REG32(base, 0x00000040)
+#define reg_STATION_ADDRESS_2(base) __REG32(base, 0x00000044)
+
+#define reg_PORT_CONTROL(base) __REG32(base, 0x00000200)
+#define PORT_CONTROL_PRI (0x00000001)
+#define PORT_CONTROL_BPT (0x00010000)
+#define PORT_CONTROL_SPD (0x00040000)
+#define PORT_CONTROL_RBC (0x00080000)
+#define PORT_CONTROL_PRB (0x00200000)
+#define PORT_CONTROL_DIS (0x00400000)
+#define PORT_CONTROL_TBI (0x00800000)
+#define PORT_CONTROL_STE (0x10000000)
+#define PORT_CONTROL_ZOR (0x20000000)
+#define PORT_CONTROL_CLR (0x40000000)
+#define PORT_CONTROL_SRT (0x80000000)
+
+#define reg_TX_CONFIG(base) __REG32(base, 0x00000220)
+#define TX_CONFIG_START_Q (0x00000003)
+#define TX_CONFIG_EHP (0x00400000)
+#define TX_CONFIG_CHP (0x00800000)
+#define TX_CONFIG_RST (0x80000000)
+
+#define reg_TX_CONTROL(base) __REG32(base, 0x00000224)
+#define TX_CONTROL_GO (0x00008000)
+#define TX_CONTROL_MP (0x01000000)
+#define TX_CONTROL_EAI (0x20000000)
+#define TX_CONTROL_ABT (0x40000000)
+#define TX_CONTROL_EII (0x80000000)
+
+#define reg_TX_STATUS(base) __REG32(base, 0x00000228)
+#define TX_STATUS_QUEUE_USABLE (0x0000000f)
+#define TX_STATUS_CURR_Q (0x00000300)
+#define TX_STATUS_ACT (0x00008000)
+#define TX_STATUS_QUEUE_IDLE (0x000f0000)
+#define TX_STATUS_EOQ_PENDING (0x0f000000)
+
+#define reg_TX_EXTENDED_STATUS(base) __REG32(base, 0x0000022c)
+#define TX_EXTENDED_STATUS_END_OF_QUEUE_CONDITION (0x0000000f)
+#define TX_EXTENDED_STATUS_END_OF_FRAME_CONDITION (0x00000f00)
+#define TX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000)
+#define TX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000)
+
+#define reg_TX_THRESHOLDS(base) __REG32(base, 0x00000230)
+
+#define reg_TX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000270)
+#define TX_DIAGNOSTIC_ADDR_INDEX (0x0000007f)
+#define TX_DIAGNOSTIC_ADDR_DFR (0x40000000)
+#define TX_DIAGNOSTIC_ADDR_AI (0x80000000)
+
+#define reg_TX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000274)
+
+#define reg_TX_ERROR_STATUS(base) __REG32(base, 0x00000278)
+#define TX_ERROR_STATUS (0x00000278)
+#define TX_ERROR_STATUS_QUEUE_0_ERROR_RESPONSE (0x0000000f)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_0 (0x00000010)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_0 (0x00000020)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_0 (0x00000040)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_0 (0x00000080)
+#define TX_ERROR_STATUS_QUEUE_1_ERROR_RESPONSE (0x00000f00)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_1 (0x00001000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_1 (0x00002000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_1 (0x00004000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_1 (0x00008000)
+#define TX_ERROR_STATUS_QUEUE_2_ERROR_RESPONSE (0x000f0000)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_2 (0x00100000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_2 (0x00200000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_2 (0x00400000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_2 (0x00800000)
+#define TX_ERROR_STATUS_QUEUE_3_ERROR_RESPONSE (0x0f000000)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_3 (0x10000000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_3 (0x20000000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_3 (0x40000000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_3 (0x80000000)
+
+#define reg_TX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000280)
+#define TX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f)
+#define TX_QUEUE_0_CONFIG_BSWP (0x00000400)
+#define TX_QUEUE_0_CONFIG_WSWP (0x00000800)
+#define TX_QUEUE_0_CONFIG_AM (0x00004000)
+#define TX_QUEUE_0_CONFIG_GVI (0x00008000)
+#define TX_QUEUE_0_CONFIG_EEI (0x00010000)
+#define TX_QUEUE_0_CONFIG_ELI (0x00020000)
+#define TX_QUEUE_0_CONFIG_ENI (0x00040000)
+#define TX_QUEUE_0_CONFIG_ESI (0x00080000)
+#define TX_QUEUE_0_CONFIG_EDI (0x00100000)
+
+#define reg_TX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000284)
+#define TX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f)
+#define TX_QUEUE_0_BUF_CONFIG_BURST (0x00000300)
+#define TX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400)
+#define TX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800)
+
+#define OCN_PORT_HLP 0 /* HLP Interface */
+#define OCN_PORT_PCI_X 1 /* PCI-X Interface */
+#define OCN_PORT_PROCESSOR_MASTER 2 /* Processor Interface (master) */
+#define OCN_PORT_PROCESSOR_SLAVE 3 /* Processor Interface (slave) */
+#define OCN_PORT_MEMORY 4 /* Memory Controller */
+#define OCN_PORT_DMA 5 /* DMA Controller */
+#define OCN_PORT_ETHERNET 6 /* Ethernet Controller */
+#define OCN_PORT_PRINT 7 /* Print Engine Interface */
+
+#define reg_TX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000288)
+
+#define reg_TX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000028c)
+#define TX_QUEUE_0_PTR_HIGH_VALID (0x80000000)
+
+#define reg_RX_CONFIG(base) __REG32(base, 0x00000320)
+#define RX_CONFIG_DEF_Q (0x00000003)
+#define RX_CONFIG_EMF (0x00000100)
+#define RX_CONFIG_EUF (0x00000200)
+#define RX_CONFIG_BFE (0x00000400)
+#define RX_CONFIG_MFE (0x00000800)
+#define RX_CONFIG_UFE (0x00001000)
+#define RX_CONFIG_SE (0x00002000)
+#define RX_CONFIG_ABF (0x00200000)
+#define RX_CONFIG_APE (0x00400000)
+#define RX_CONFIG_CHP (0x00800000)
+#define RX_CONFIG_RST (0x80000000)
+
+#define reg_RX_CONTROL(base) __REG32(base, 0x00000324)
+#define GE_E0_RX_CONTROL_QUEUE_ENABLES (0x0000000f)
+#define GE_E0_RX_CONTROL_GO (0x00008000)
+#define GE_E0_RX_CONTROL_EAI (0x20000000)
+#define GE_E0_RX_CONTROL_ABT (0x40000000)
+#define GE_E0_RX_CONTROL_EII (0x80000000)
+
+#define reg_RX_EXTENDED_STATUS(base) __REG32(base, 0x0000032c)
+#define RX_EXTENDED_STATUS (0x0000032c)
+#define RX_EXTENDED_STATUS_EOQ (0x0000000f)
+#define RX_EXTENDED_STATUS_EOQ_0 (0x00000001)
+#define RX_EXTENDED_STATUS_EOF (0x00000f00)
+#define RX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000)
+#define RX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000)
+
+#define reg_RX_THRESHOLDS(base) __REG32(base, 0x00000330)
+
+#define reg_RX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000370)
+#define RX_DIAGNOSTIC_ADDR_INDEX (0x0000007f)
+#define RX_DIAGNOSTIC_ADDR_DFR (0x40000000)
+#define RX_DIAGNOSTIC_ADDR_AI (0x80000000)
+
+#define reg_RX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000374)
+
+#define reg_RX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000380)
+#define RX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f)
+#define RX_QUEUE_0_CONFIG_BSWP (0x00000400)
+#define RX_QUEUE_0_CONFIG_WSWP (0x00000800)
+#define RX_QUEUE_0_CONFIG_AM (0x00004000)
+#define RX_QUEUE_0_CONFIG_EEI (0x00010000)
+#define RX_QUEUE_0_CONFIG_ELI (0x00020000)
+#define RX_QUEUE_0_CONFIG_ENI (0x00040000)
+#define RX_QUEUE_0_CONFIG_ESI (0x00080000)
+#define RX_QUEUE_0_CONFIG_EDI (0x00100000)
+
+#define reg_RX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000384)
+#define RX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f)
+#define RX_QUEUE_0_BUF_CONFIG_BURST (0x00000300)
+#define RX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400)
+#define RX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800)
+
+#define reg_RX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000388)
+
+#define reg_RX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000038c)
+#define RX_QUEUE_0_PTR_HIGH_VALID (0x80000000)
+
+/*
+ * PHY register definitions
+ */
+/* the first 15 PHY registers are standard. */
+#define PHY_CTRL_REG 0 /* Control Register */
+#define PHY_STATUS_REG 1 /* Status Regiser */
+#define PHY_ID1_REG 2 /* Phy Id Reg (word 1) */
+#define PHY_ID2_REG 3 /* Phy Id Reg (word 2) */
+#define PHY_AN_ADV_REG 4 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY_REG 5 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP_REG 6 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX_REG 7 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE_REG 8 /* Link Partner Next Page */
+#define PHY_1000T_CTRL_REG 9 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS_REG 10 /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS_REG 11 /* Extended Status Reg */
+
+/*
+ * PHY Register bit masks.
+ */
+#define PHY_CTRL_RESET (1 << 15)
+#define PHY_CTRL_LOOPBACK (1 << 14)
+#define PHY_CTRL_SPEED0 (1 << 13)
+#define PHY_CTRL_AN_EN (1 << 12)
+#define PHY_CTRL_PWR_DN (1 << 11)
+#define PHY_CTRL_ISOLATE (1 << 10)
+#define PHY_CTRL_RESTART_AN (1 << 9)
+#define PHY_CTRL_FULL_DUPLEX (1 << 8)
+#define PHY_CTRL_CT_EN (1 << 7)
+#define PHY_CTRL_SPEED1 (1 << 6)
+
+#define PHY_STAT_100BASE_T4 (1 << 15)
+#define PHY_STAT_100BASE_X_FD (1 << 14)
+#define PHY_STAT_100BASE_X_HD (1 << 13)
+#define PHY_STAT_10BASE_T_FD (1 << 12)
+#define PHY_STAT_10BASE_T_HD (1 << 11)
+#define PHY_STAT_100BASE_T2_FD (1 << 10)
+#define PHY_STAT_100BASE_T2_HD (1 << 9)
+#define PHY_STAT_EXT_STAT (1 << 8)
+#define PHY_STAT_RESERVED (1 << 7)
+#define PHY_STAT_MFPS (1 << 6) /* Management Frames Preamble Suppression */
+#define PHY_STAT_AN_COMPLETE (1 << 5)
+#define PHY_STAT_REM_FAULT (1 << 4)
+#define PHY_STAT_AN_CAP (1 << 3)
+#define PHY_STAT_LINK_UP (1 << 2)
+#define PHY_STAT_JABBER (1 << 1)
+#define PHY_STAT_EXT_CAP (1 << 0)
+
+#define TBI_CONTROL_2 0x11
+#define TBI_CONTROL_2_ENABLE_COMMA_DETECT 0x0001
+#define TBI_CONTROL_2_ENABLE_WRAP 0x0002
+#define TBI_CONTROL_2_G_MII_MODE 0x0010
+#define TBI_CONTROL_2_RECEIVE_CLOCK_SELECT 0x0020
+#define TBI_CONTROL_2_AUTO_NEGOTIATION_SENSE 0x0100
+#define TBI_CONTROL_2_DISABLE_TRANSMIT_RUNNING_DISPARITY 0x1000
+#define TBI_CONTROL_2_DISABLE_RECEIVE_RUNNING_DISPARITY 0x2000
+#define TBI_CONTROL_2_SHORTCUT_LINK_TIMER 0x4000
+#define TBI_CONTROL_2_SOFT_RESET 0x8000
+
+/* marvel specific */
+#define MV1111_EXT_CTRL1_REG 16 /* PHY Specific Control Reg */
+#define MV1111_SPEC_STAT_REG 17 /* PHY Specific Status Reg */
+#define MV1111_EXT_CTRL2_REG 20 /* Extended PHY Specific Control Reg */
+
+/*
+ * MARVELL 88E1111 PHY register bit masks
+ */
+/* PHY Specific Status Register (MV1111_EXT_CTRL1_REG) */
+
+#define SPEC_STAT_SPEED_MASK (3 << 14)
+#define SPEC_STAT_FULL_DUP (1 << 13)
+#define SPEC_STAT_PAGE_RCVD (1 << 12)
+#define SPEC_STAT_RESOLVED (1 << 11) /* Speed and Duplex Resolved */
+#define SPEC_STAT_LINK_UP (1 << 10)
+#define SPEC_STAT_CABLE_LEN_MASK (7 << 7)/* Cable Length (100/1000 modes only) */
+#define SPEC_STAT_MDIX (1 << 6)
+#define SPEC_STAT_POLARITY (1 << 1)
+#define SPEC_STAT_JABBER (1 << 0)
+
+#define SPEED_1000 (2 << 14)
+#define SPEED_100 (1 << 14)
+#define SPEED_10 (0 << 14)
+
+#define TBI_ADDR 0x1E /* Ten Bit Interface address */
+
+/* negotiated link parameters */
+#define LINK_SPEED_UNKNOWN 0
+#define LINK_SPEED_10 1
+#define LINK_SPEED_100 2
+#define LINK_SPEED_1000 3
+
+#define LINK_DUPLEX_UNKNOWN 0
+#define LINK_DUPLEX_HALF 1
+#define LINK_DUPLEX_FULL 2
+
+static unsigned int phy_address[] = { 8, 9 };
+
+#define vuint32 volatile u32
+
+/* TX/RX buffer descriptors. MUST be cache line aligned in memory. (32 byte)
+ * This structure is accessed by the ethernet DMA engine which means it
+ * MUST be in LITTLE ENDIAN format */
+struct dma_descriptor {
+ vuint32 start_addr0; /* buffer address, least significant bytes. */
+ vuint32 start_addr1; /* buffer address, most significant bytes. */
+ vuint32 next_descr_addr0;/* next descriptor address, least significant bytes. Must be 64-bit aligned. */
+ vuint32 next_descr_addr1;/* next descriptor address, most significant bytes. */
+ vuint32 vlan_byte_count;/* VLAN tag(top 2 bytes) and byte countt (bottom 2 bytes). */
+ vuint32 config_status; /* Configuration/Status. */
+ vuint32 reserved1; /* reserved to make the descriptor cache line aligned. */
+ vuint32 reserved2; /* reserved to make the descriptor cache line aligned. */
+};
+
+/* last next descriptor address flag */
+#define DMA_DESCR_LAST (1 << 31)
+
+/* TX DMA descriptor config status bits */
+#define DMA_DESCR_TX_EOF (1 << 0) /* end of frame */
+#define DMA_DESCR_TX_SOF (1 << 1) /* start of frame */
+#define DMA_DESCR_TX_PFVLAN (1 << 2)
+#define DMA_DESCR_TX_HUGE (1 << 3)
+#define DMA_DESCR_TX_PAD (1 << 4)
+#define DMA_DESCR_TX_CRC (1 << 5)
+#define DMA_DESCR_TX_DESCR_INT (1 << 14)
+#define DMA_DESCR_TX_RETRY_COUNT 0x000F0000
+#define DMA_DESCR_TX_ONE_COLLISION (1 << 20)
+#define DMA_DESCR_TX_LATE_COLLISION (1 << 24)
+#define DMA_DESCR_TX_UNDERRUN (1 << 25)
+#define DMA_DESCR_TX_RETRY_LIMIT (1 << 26)
+#define DMA_DESCR_TX_OK (1 << 30)
+#define DMA_DESCR_TX_OWNER (1 << 31)
+
+/* RX DMA descriptor status bits */
+#define DMA_DESCR_RX_EOF (1 << 0)
+#define DMA_DESCR_RX_SOF (1 << 1)
+#define DMA_DESCR_RX_VTF (1 << 2)
+#define DMA_DESCR_RX_FRAME_IS_TYPE (1 << 3)
+#define DMA_DESCR_RX_SHORT_FRAME (1 << 4)
+#define DMA_DESCR_RX_HASH_MATCH (1 << 7)
+#define DMA_DESCR_RX_BAD_FRAME (1 << 8)
+#define DMA_DESCR_RX_OVERRUN (1 << 9)
+#define DMA_DESCR_RX_MAX_FRAME_LEN (1 << 11)
+#define DMA_DESCR_RX_CRC_ERROR (1 << 12)
+#define DMA_DESCR_RX_DESCR_INT (1 << 13)
+#define DMA_DESCR_RX_OWNER (1 << 15)
+
+#define RX_BUFFER_SIZE PKTSIZE
+#define NUM_RX_DESC PKTBUFSRX
+
+static struct dma_descriptor tx_descriptor __attribute__ ((aligned(32)));
+
+static struct dma_descriptor rx_descr_array[NUM_RX_DESC]
+ __attribute__ ((aligned(32)));
+
+static struct dma_descriptor *rx_descr_current;
+
+static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis);
+static int tsi108_eth_send (struct eth_device *dev,
+ volatile void *packet, int length);
+static int tsi108_eth_recv (struct eth_device *dev);
+static void tsi108_eth_halt (struct eth_device *dev);
+static unsigned int read_phy (unsigned int base,
+ unsigned int phy_addr, unsigned int phy_reg);
+static void write_phy (unsigned int base,
+ unsigned int phy_addr,
+ unsigned int phy_reg, unsigned int phy_data);
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print phy debug infomation
+ */
+static void dump_phy_regs (unsigned int phy_addr)
+{
+ int i;
+
+ printf ("PHY %d registers\n", phy_addr);
+ for (i = 0; i <= 30; i++) {
+ printf ("%2d 0x%04x\n", i, read_phy (ETH_BASE, phy_addr, i));
+ }
+ printf ("\n");
+
+}
+#else
+#define dump_phy_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void tx_diag_regs (unsigned int base)
+{
+ int i;
+ unsigned long dummy;
+
+ printf ("TX diagnostics registers\n");
+ reg_TX_DIAGNOSTIC_ADDR(base) = 0x00 | TX_DIAGNOSTIC_ADDR_AI;
+ udelay (1000);
+ dummy = reg_TX_DIAGNOSTIC_DATA(base);
+ for (i = 0x00; i <= 0x05; i++) {
+ udelay (1000);
+ printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base));
+ }
+ reg_TX_DIAGNOSTIC_ADDR(base) = 0x40 | TX_DIAGNOSTIC_ADDR_AI;
+ udelay (1000);
+ dummy = reg_TX_DIAGNOSTIC_DATA(base);
+ for (i = 0x40; i <= 0x47; i++) {
+ udelay (1000);
+ printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base));
+ }
+ printf ("\n");
+
+}
+#else
+#define tx_diag_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void rx_diag_regs (unsigned int base)
+{
+ int i;
+ unsigned long dummy;
+
+ printf ("RX diagnostics registers\n");
+ reg_RX_DIAGNOSTIC_ADDR(base) = 0x00 | RX_DIAGNOSTIC_ADDR_AI;
+ udelay (1000);
+ dummy = reg_RX_DIAGNOSTIC_DATA(base);
+ for (i = 0x00; i <= 0x05; i++) {
+ udelay (1000);
+ printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base));
+ }
+ reg_RX_DIAGNOSTIC_ADDR(base) = 0x40 | RX_DIAGNOSTIC_ADDR_AI;
+ udelay (1000);
+ dummy = reg_RX_DIAGNOSTIC_DATA(base);
+ for (i = 0x08; i <= 0x0a; i++) {
+ udelay (1000);
+ printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base));
+ }
+ printf ("\n");
+
+}
+#else
+#define rx_diag_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void debug_mii_regs (unsigned int base)
+{
+ printf ("MII_MGMT_CONFIG 0x%08x\n", reg_MII_MGMT_CONFIG(base));
+ printf ("MII_MGMT_COMMAND 0x%08x\n", reg_MII_MGMT_COMMAND(base));
+ printf ("MII_MGMT_ADDRESS 0x%08x\n", reg_MII_MGMT_ADDRESS(base));
+ printf ("MII_MGMT_CONTROL 0x%08x\n", reg_MII_MGMT_CONTROL(base));
+ printf ("MII_MGMT_STATUS 0x%08x\n", reg_MII_MGMT_STATUS(base));
+ printf ("MII_MGMT_INDICATORS 0x%08x\n", reg_MII_MGMT_INDICATORS(base));
+ printf ("\n");
+
+}
+#else
+#define debug_mii_regs(base) do{}while(0)
+#endif
+
+/*
+ * Wait until the phy bus is non-busy
+ */
+static void phy_wait (unsigned int base, unsigned int condition)
+{
+ int timeout;
+
+ timeout = 0;
+ while (reg_MII_MGMT_INDICATORS(base) & condition) {
+ udelay (10);
+ if (++timeout > 10000) {
+ printf ("ERROR: timeout waiting for phy bus (%d)\n",
+ condition);
+ break;
+ }
+ }
+}
+
+/*
+ * read phy register
+ */
+static unsigned int read_phy (unsigned int base,
+ unsigned int phy_addr, unsigned int phy_reg)
+{
+ unsigned int value;
+
+ phy_wait (base, MII_MGMT_INDICATORS_BUSY);
+
+ reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg;
+
+ /* Ensure that the Read Cycle bit is cleared prior to next read cycle */
+ reg_MII_MGMT_COMMAND(base) = 0;
+
+ /* start the read */
+ reg_MII_MGMT_COMMAND(base) = MII_MGMT_COMMAND_READ_CYCLE;
+
+ /* wait for the read to complete */
+ phy_wait (base,
+ MII_MGMT_INDICATORS_NOT_VALID | MII_MGMT_INDICATORS_BUSY);
+
+ value = reg_MII_MGMT_STATUS(base);
+
+ reg_MII_MGMT_COMMAND(base) = 0;
+
+ return value;
+}
+
+/*
+ * write phy register
+ */
+static void write_phy (unsigned int base,
+ unsigned int phy_addr,
+ unsigned int phy_reg, unsigned int phy_data)
+{
+ phy_wait (base, MII_MGMT_INDICATORS_BUSY);
+
+ reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg;
+
+ /* Ensure that the Read Cycle bit is cleared prior to next cycle */
+ reg_MII_MGMT_COMMAND(base) = 0;
+
+ /* start the write */
+ reg_MII_MGMT_CONTROL(base) = phy_data;
+}
+
+/*
+ * configure the marvell 88e1111 phy
+ */
+static int marvell_88e_phy_config (struct eth_device *dev, int *speed,
+ int *duplex)
+{
+ unsigned long base;
+ unsigned long phy_addr;
+ unsigned int phy_status;
+ unsigned int phy_spec_status;
+ int timeout;
+ int phy_speed;
+ int phy_duplex;
+ unsigned int value;
+
+ phy_speed = LINK_SPEED_UNKNOWN;
+ phy_duplex = LINK_DUPLEX_UNKNOWN;
+
+ base = dev->iobase;
+ phy_addr = (unsigned long)dev->priv;
+
+ /* Take the PHY out of reset. */
+ write_phy (ETH_BASE, phy_addr, PHY_CTRL_REG, PHY_CTRL_RESET);
+
+ /* Wait for the reset process to complete. */
+ udelay (10);
+ timeout = 0;
+ while ((phy_status =
+ read_phy (ETH_BASE, phy_addr, PHY_CTRL_REG)) & PHY_CTRL_RESET) {
+ udelay (10);
+ if (++timeout > 10000) {
+ printf ("ERROR: timeout waiting for phy reset\n");
+ break;
+ }
+ }
+
+ /* TBI Configuration. */
+ write_phy (base, TBI_ADDR, TBI_CONTROL_2, TBI_CONTROL_2_G_MII_MODE |
+ TBI_CONTROL_2_RECEIVE_CLOCK_SELECT);
+ /* Wait for the link to be established. */
+ timeout = 0;
+ do {
+ udelay (20000);
+ phy_status = read_phy (ETH_BASE, phy_addr, PHY_STATUS_REG);
+ if (++timeout > 100) {
+ debug_lev(1, "ERROR: unable to establish link!!!\n");
+ break;
+ }
+ } while ((phy_status & PHY_STAT_LINK_UP) == 0);
+
+ if ((phy_status & PHY_STAT_LINK_UP) == 0)
+ return 0;
+
+ value = 0;
+ phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG);
+ if (phy_spec_status & SPEC_STAT_RESOLVED) {
+ switch (phy_spec_status & SPEC_STAT_SPEED_MASK) {
+ case SPEED_1000:
+ phy_speed = LINK_SPEED_1000;
+ value |= PHY_CTRL_SPEED1;
+ break;
+ case SPEED_100:
+ phy_speed = LINK_SPEED_100;
+ value |= PHY_CTRL_SPEED0;
+ break;
+ case SPEED_10:
+ phy_speed = LINK_SPEED_10;
+ break;
+ }
+ if (phy_spec_status & SPEC_STAT_FULL_DUP) {
+ phy_duplex = LINK_DUPLEX_FULL;
+ value |= PHY_CTRL_FULL_DUPLEX;
+ } else
+ phy_duplex = LINK_DUPLEX_HALF;
+ }
+ /* set TBI speed */
+ write_phy (base, TBI_ADDR, PHY_CTRL_REG, value);
+ write_phy (base, TBI_ADDR, PHY_AN_ADV_REG, 0x0060);
+
+#if TSI108_ETH_DEBUG > 0
+ printf ("%s link is up", dev->name);
+ phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG);
+ if (phy_spec_status & SPEC_STAT_RESOLVED) {
+ switch (phy_speed) {
+ case LINK_SPEED_1000:
+ printf (", 1000 Mbps");
+ break;
+ case LINK_SPEED_100:
+ printf (", 100 Mbps");
+ break;
+ case LINK_SPEED_10:
+ printf (", 10 Mbps");
+ break;
+ }
+ if (phy_duplex == LINK_DUPLEX_FULL)
+ printf (", Full duplex");
+ else
+ printf (", Half duplex");
+ }
+ printf ("\n");
+#endif
+
+ dump_phy_regs (TBI_ADDR);
+ if (speed)
+ *speed = phy_speed;
+ if (duplex)
+ *duplex = phy_duplex;
+
+ return 1;
+}
+
+/*
+ * External interface
+ *
+ * register the tsi108 ethernet controllers with the multi-ethernet system
+ */
+int tsi108_eth_initialize (bd_t * bis)
+{
+ struct eth_device *dev;
+ int index;
+
+ for (index = 0; index < CONFIG_TSI108_ETH_NUM_PORTS; index++) {
+ dev = (struct eth_device *)malloc(sizeof(struct eth_device));
+
+ sprintf (dev->name, "TSI108_eth%d", index);
+
+ dev->iobase = ETH_BASE + (index * ETH_PORT_OFFSET);
+ dev->priv = (void *)(phy_address[index]);
+ dev->init = tsi108_eth_probe;
+ dev->halt = tsi108_eth_halt;
+ dev->send = tsi108_eth_send;
+ dev->recv = tsi108_eth_recv;
+
+ eth_register(dev);
+ }
+ return index;
+}
+
+/*
+ * probe for and initialize a single ethernet interface
+ */
+static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis)
+{
+ unsigned long base;
+ unsigned long value;
+ int index;
+ struct dma_descriptor *tx_descr;
+ struct dma_descriptor *rx_descr;
+ int speed;
+ int duplex;
+
+ base = dev->iobase;
+
+ reg_PORT_CONTROL(base) = PORT_CONTROL_STE | PORT_CONTROL_BPT;
+
+ /* Bring DMA/FIFO out of reset. */
+ reg_TX_CONFIG(base) = 0x00000000;
+ reg_RX_CONFIG(base) = 0x00000000;
+
+ reg_TX_THRESHOLDS(base) = (192 << 16) | 192;
+ reg_RX_THRESHOLDS(base) = (192 << 16) | 112;
+
+ /* Bring MAC out of reset. */
+ reg_MAC_CONFIG_1(base) = 0x00000000;
+
+ /* DMA MAC configuration. */
+ reg_MAC_CONFIG_1(base) =
+ MAC_CONFIG_1_RX_ENABLE | MAC_CONFIG_1_TX_ENABLE;
+
+ reg_MII_MGMT_CONFIG(base) = MII_MGMT_CONFIG_NO_PREAMBLE;
+ reg_MAXIMUM_FRAME_LENGTH(base) = RX_BUFFER_SIZE;
+
+ /* Note: Early tsi108 manual did not have correct byte order
+ * for the station address.*/
+ reg_STATION_ADDRESS_1(base) = (dev->enetaddr[5] << 24) |
+ (dev->enetaddr[4] << 16) |
+ (dev->enetaddr[3] << 8) | (dev->enetaddr[2] << 0);
+
+ reg_STATION_ADDRESS_2(base) = (dev->enetaddr[1] << 24) |
+ (dev->enetaddr[0] << 16);
+
+ if (marvell_88e_phy_config(dev, &speed, &duplex) == 0)
+ return 0;
+
+ value =
+ MAC_CONFIG_2_PREAMBLE_LENGTH(7) | MAC_CONFIG_2_PAD_CRC |
+ MAC_CONFIG_2_CRC_ENABLE;
+ if (speed == LINK_SPEED_1000)
+ value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_BYTE);
+ else {
+ value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_NIBBLE);
+ reg_PORT_CONTROL(base) |= PORT_CONTROL_SPD;
+ }
+ if (duplex == LINK_DUPLEX_FULL) {
+ value |= MAC_CONFIG_2_FULL_DUPLEX;
+ reg_PORT_CONTROL(base) &= ~PORT_CONTROL_BPT;
+ } else
+ reg_PORT_CONTROL(base) |= PORT_CONTROL_BPT;
+ reg_MAC_CONFIG_2(base) = value;
+
+ reg_RX_CONFIG(base) = RX_CONFIG_SE;
+ reg_RX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY;
+ reg_RX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY;
+
+ /* initialize the RX DMA descriptors */
+ rx_descr = &rx_descr_array[0];
+ rx_descr_current = rx_descr;
+ for (index = 0; index < NUM_RX_DESC; index++) {
+ /* make sure the receive buffers are not in cache */
+ invalidate_dcache_range((unsigned long)NetRxPackets[index],
+ (unsigned long)NetRxPackets[index] +
+ RX_BUFFER_SIZE);
+ rx_descr->start_addr0 =
+ cpu_to_le32((vuint32) NetRxPackets[index]);
+ rx_descr->start_addr1 = 0;
+ rx_descr->next_descr_addr0 =
+ cpu_to_le32((vuint32) (rx_descr + 1));
+ rx_descr->next_descr_addr1 = 0;
+ rx_descr->vlan_byte_count = 0;
+ rx_descr->config_status = cpu_to_le32((RX_BUFFER_SIZE << 16) |
+ DMA_DESCR_RX_OWNER);
+ rx_descr++;
+ }
+ rx_descr--;
+ rx_descr->next_descr_addr0 = 0;
+ rx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+ /* Push the descriptors to RAM so the ethernet DMA can see them */
+ invalidate_dcache_range((unsigned long)rx_descr_array,
+ (unsigned long)rx_descr_array +
+ sizeof(rx_descr_array));
+
+ /* enable RX queue */
+ reg_RX_CONTROL(base) = TX_CONTROL_GO | 0x01;
+ reg_RX_QUEUE_0_PTR_LOW(base) = (u32) rx_descr_current;
+ /* enable receive DMA */
+ reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID;
+
+ reg_TX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY;
+ reg_TX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY;
+
+ /* initialize the TX DMA descriptor */
+ tx_descr = &tx_descriptor;
+
+ tx_descr->start_addr0 = 0;
+ tx_descr->start_addr1 = 0;
+ tx_descr->next_descr_addr0 = 0;
+ tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+ tx_descr->vlan_byte_count = 0;
+ tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OK |
+ DMA_DESCR_TX_SOF |
+ DMA_DESCR_TX_EOF);
+ /* enable TX queue */
+ reg_TX_CONTROL(base) = TX_CONTROL_GO | 0x01;
+
+ return 1;
+}
+
+/*
+ * send a packet
+ */
+static int tsi108_eth_send (struct eth_device *dev,
+ volatile void *packet, int length)
+{
+ unsigned long base;
+ int timeout;
+ struct dma_descriptor *tx_descr;
+ unsigned long status;
+
+ base = dev->iobase;
+ tx_descr = &tx_descriptor;
+
+ /* Wait until the last packet has been transmitted. */
+ timeout = 0;
+ do {
+ /* make sure we see the changes made by the DMA engine */
+ invalidate_dcache_range((unsigned long)tx_descr,
+ (unsigned long)tx_descr +
+ sizeof(struct dma_descriptor));
+
+ if (timeout != 0)
+ udelay (15);
+ if (++timeout > 10000) {
+ tx_diag_regs(base);
+ debug_lev(1,
+ "ERROR: timeout waiting for last transmit packet to be sent\n");
+ return 0;
+ }
+ } while (tx_descr->config_status & cpu_to_le32(DMA_DESCR_TX_OWNER));
+
+ status = le32_to_cpu(tx_descr->config_status);
+ if ((status & DMA_DESCR_TX_OK) == 0) {
+#ifdef TX_PRINT_ERRORS
+ printf ("TX packet error: 0x%08x\n %s%s%s%s\n", status,
+ status & DMA_DESCR_TX_OK ? "tx error, " : "",
+ status & DMA_DESCR_TX_RETRY_LIMIT ?
+ "retry limit reached, " : "",
+ status & DMA_DESCR_TX_UNDERRUN ? "underrun, " : "",
+ status & DMA_DESCR_TX_LATE_COLLISION ? "late collision, "
+ : "");
+#endif
+ }
+
+ debug_lev (9, "sending packet %d\n", length);
+ tx_descr->start_addr0 = cpu_to_le32((vuint32) packet);
+ tx_descr->start_addr1 = 0;
+ tx_descr->next_descr_addr0 = 0;
+ tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+ tx_descr->vlan_byte_count = cpu_to_le32(length);
+ tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OWNER |
+ DMA_DESCR_TX_CRC |
+ DMA_DESCR_TX_PAD |
+ DMA_DESCR_TX_SOF |
+ DMA_DESCR_TX_EOF);
+
+ invalidate_dcache_range((unsigned long)tx_descr,
+ (unsigned long)tx_descr +
+ sizeof(struct dma_descriptor));
+
+ invalidate_dcache_range((unsigned long)packet,
+ (unsigned long)packet + length);
+
+ reg_TX_QUEUE_0_PTR_LOW(base) = (u32) tx_descr;
+ reg_TX_QUEUE_0_PTR_HIGH(base) = TX_QUEUE_0_PTR_HIGH_VALID;
+
+ return length;
+}
+
+/*
+ * Check for received packets and send them up the protocal stack
+ */
+static int tsi108_eth_recv (struct eth_device *dev)
+{
+ struct dma_descriptor *rx_descr;
+ unsigned long base;
+ int length = 0;
+ unsigned long status;
+ volatile uchar *buffer;
+
+ base = dev->iobase;
+
+ /* make sure we see the changes made by the DMA engine */
+ invalidate_dcache_range ((unsigned long)rx_descr_array,
+ (unsigned long)rx_descr_array +
+ sizeof(rx_descr_array));
+
+ /* process all of the received packets */
+ rx_descr = rx_descr_current;
+ while ((rx_descr->config_status & cpu_to_le32(DMA_DESCR_RX_OWNER)) == 0) {
+ /* check for error */
+ status = le32_to_cpu(rx_descr->config_status);
+ if (status & DMA_DESCR_RX_BAD_FRAME) {
+#ifdef RX_PRINT_ERRORS
+ printf ("RX packet error: 0x%08x\n %s%s%s%s%s%s\n",
+ status,
+ status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, "
+ : "",
+ status & DMA_DESCR_RX_SHORT_FRAME ? "too short, "
+ : "",
+ status & DMA_DESCR_RX_BAD_FRAME ? "bad frame, " :
+ "",
+ status & DMA_DESCR_RX_OVERRUN ? "overrun, " : "",
+ status & DMA_DESCR_RX_MAX_FRAME_LEN ?
+ "max length, " : "",
+ status & DMA_DESCR_RX_CRC_ERROR ? "CRC error, " :
+ "");
+#endif
+ } else {
+ length =
+ le32_to_cpu(rx_descr->vlan_byte_count) & 0xFFFF;
+
+ /*** process packet ***/
+ buffer =
+ (volatile uchar
+ *)(le32_to_cpu (rx_descr->start_addr0));
+ NetReceive (buffer, length);
+
+ invalidate_dcache_range ((unsigned long)buffer,
+ (unsigned long)buffer +
+ RX_BUFFER_SIZE);
+ }
+ /* Give this buffer back to the DMA engine */
+ rx_descr->vlan_byte_count = 0;
+ rx_descr->config_status = cpu_to_le32 ((RX_BUFFER_SIZE << 16) |
+ DMA_DESCR_RX_OWNER);
+ /* move descriptor pointer forward */
+ rx_descr =
+ (struct dma_descriptor
+ *)(le32_to_cpu (rx_descr->next_descr_addr0));
+ if (rx_descr == 0)
+ rx_descr = &rx_descr_array[0];
+ }
+ /* remember where we are for next time */
+ rx_descr_current = rx_descr;
+
+ /* If the DMA engine has reached the end of the queue
+ * start over at the begining */
+ if (reg_RX_EXTENDED_STATUS(base) & RX_EXTENDED_STATUS_EOQ_0) {
+
+ reg_RX_EXTENDED_STATUS(base) = RX_EXTENDED_STATUS_EOQ_0;
+ reg_RX_QUEUE_0_PTR_LOW(base) = (u32) & rx_descr_array[0];
+ reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID;
+ }
+
+ return length;
+}
+
+/*
+ * disable an ethernet interface
+ */
+static void tsi108_eth_halt (struct eth_device *dev)
+{
+ unsigned long base;
+
+ base = dev->iobase;
+
+ /* Put DMA/FIFO into reset state. */
+ reg_TX_CONFIG(base) = TX_CONFIG_RST;
+ reg_RX_CONFIG(base) = RX_CONFIG_RST;
+
+ /* Put MAC into reset state. */
+ reg_MAC_CONFIG_1(base) = MAC_CONFIG_1_SOFT_RESET;
+}
+
+#endif
diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c
new file mode 100644
index 0000000..1267c57
--- /dev/null
+++ b/drivers/net/uli526x.c
@@ -0,0 +1,996 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Roy Zang <tie-fei.zang@freescale.com>, Sep, 2007
+ *
+ * Description:
+ * ULI 526x Ethernet port driver.
+ * Based on the Linux driver: drivers/net/tulip/uli526x.c
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <miiphy.h>
+
+/* some kernel function compatible define */
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+ defined(CONFIG_ULI526X)
+
+#undef DEBUG
+
+/* Board/System/Debug information/definition */
+#define ULI_VENDOR_ID 0x10B9
+#define ULI5261_DEVICE_ID 0x5261
+#define ULI5263_DEVICE_ID 0x5263
+/* ULi M5261 ID*/
+#define PCI_ULI5261_ID ULI5261_DEVICE_ID << 16 | ULI_VENDOR_ID
+/* ULi M5263 ID*/
+#define PCI_ULI5263_ID ULI5263_DEVICE_ID << 16 | ULI_VENDOR_ID
+
+#define ULI526X_IO_SIZE 0x100
+#define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */
+#define RX_DESC_CNT PKTBUFSRX /* Allocated Rx descriptors */
+#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
+#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
+#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
+#define TX_BUF_ALLOC 0x300
+#define RX_ALLOC_SIZE PKTSIZE
+#define ULI526X_RESET 1
+#define CR0_DEFAULT 0
+#define CR6_DEFAULT 0x22200000
+#define CR7_DEFAULT 0x180c1
+#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
+#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
+#define MAX_PACKET_SIZE 1514
+#define ULI5261_MAX_MULTICAST 14
+#define RX_COPY_SIZE 100
+#define MAX_CHECK_PACKET 0x8000
+
+#define ULI526X_10MHF 0
+#define ULI526X_100MHF 1
+#define ULI526X_10MFD 4
+#define ULI526X_100MFD 5
+#define ULI526X_AUTO 8
+
+#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */
+#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */
+#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */
+#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */
+#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */
+#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */
+
+/* CR9 definition: SROM/MII */
+#define CR9_SROM_READ 0x4800
+#define CR9_SRCS 0x1
+#define CR9_SRCLK 0x2
+#define CR9_CRDOUT 0x8
+#define SROM_DATA_0 0x0
+#define SROM_DATA_1 0x4
+#define PHY_DATA_1 0x20000
+#define PHY_DATA_0 0x00000
+#define MDCLKH 0x10000
+
+#define PHY_POWER_DOWN 0x800
+
+#define SROM_V41_CODE 0x14
+
+#define SROM_CLK_WRITE(data, ioaddr) do { \
+ outl(data|CR9_SROM_READ|CR9_SRCS, ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK, ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS, ioaddr); \
+ udelay(5); \
+ } while (0)
+
+/* Structure/enum declaration */
+
+struct tx_desc {
+ u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
+ char *tx_buf_ptr; /* Data for us */
+ struct tx_desc *next_tx_desc;
+};
+
+struct rx_desc {
+ u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
+ char *rx_buf_ptr; /* Data for us */
+ struct rx_desc *next_rx_desc;
+};
+
+struct uli526x_board_info {
+ u32 chip_id; /* Chip vendor/Device ID */
+ pci_dev_t pdev;
+
+ long ioaddr; /* I/O base address */
+ u32 cr0_data;
+ u32 cr5_data;
+ u32 cr6_data;
+ u32 cr7_data;
+ u32 cr15_data;
+
+ /* pointer for memory physical address */
+ dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */
+ dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */
+ dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */
+ dma_addr_t first_tx_desc_dma;
+ dma_addr_t first_rx_desc_dma;
+
+ /* descriptor pointer */
+ unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
+ unsigned char *buf_pool_start; /* Tx buffer pool align dword */
+ unsigned char *desc_pool_ptr; /* descriptor pool memory */
+ struct tx_desc *first_tx_desc;
+ struct tx_desc *tx_insert_ptr;
+ struct tx_desc *tx_remove_ptr;
+ struct rx_desc *first_rx_desc;
+ struct rx_desc *rx_ready_ptr; /* packet come pointer */
+ unsigned long tx_packet_cnt; /* transmitted packet count */
+
+ u16 PHY_reg4; /* Saved Phyxcer register 4 value */
+
+ u8 media_mode; /* user specify media mode */
+ u8 op_mode; /* real work dedia mode */
+ u8 phy_addr;
+
+ /* NIC SROM data */
+ unsigned char srom[128];
+};
+
+enum uli526x_offsets {
+ DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
+ DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
+ DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
+ DCR15 = 0x78
+};
+
+enum uli526x_CR6_bits {
+ CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
+ CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
+ CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
+};
+
+/* Global variable declaration -- */
+
+static unsigned char uli526x_media_mode = ULI526X_AUTO;
+
+static struct tx_desc desc_pool_array[DESC_ALL_CNT + 0x20]
+ __attribute__ ((aligned(32)));
+static char buf_pool[TX_BUF_ALLOC * TX_DESC_CNT + 4];
+
+/* For module input parameter */
+static int mode = 8;
+
+/* function declaration -- */
+static int uli526x_start_xmit(struct eth_device *dev,
+ volatile void *packet, int length);
+static const struct ethtool_ops netdev_ethtool_ops;
+static u16 read_srom_word(long, int);
+static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
+static void allocate_rx_buffer(struct uli526x_board_info *);
+static void update_cr6(u32, unsigned long);
+static u16 phy_read(unsigned long, u8, u8, u32);
+static u16 phy_readby_cr10(unsigned long, u8, u8);
+static void phy_write(unsigned long, u8, u8, u16, u32);
+static void phy_writeby_cr10(unsigned long, u8, u8, u16);
+static void phy_write_1bit(unsigned long, u32, u32);
+static u16 phy_read_1bit(unsigned long, u32);
+static int uli526x_rx_packet(struct eth_device *);
+static void uli526x_free_tx_pkt(struct eth_device *,
+ struct uli526x_board_info *);
+static void uli526x_reuse_buf(struct rx_desc *);
+static void uli526x_init(struct eth_device *);
+static void uli526x_set_phyxcer(struct uli526x_board_info *);
+
+
+static int uli526x_init_one(struct eth_device *, bd_t *);
+static void uli526x_disable(struct eth_device *);
+static void set_mac_addr(struct eth_device *);
+
+static struct pci_device_id uli526x_pci_tbl[] = {
+ { ULI_VENDOR_ID, ULI5261_DEVICE_ID}, /* 5261 device */
+ { ULI_VENDOR_ID, ULI5263_DEVICE_ID}, /* 5263 device */
+ {}
+};
+
+/* ULI526X network board routine */
+
+/*
+ * Search ULI526X board, register it
+ */
+
+int uli526x_initialize(bd_t *bis)
+{
+ pci_dev_t devno;
+ int card_number = 0;
+ struct eth_device *dev;
+ struct uli526x_board_info *db; /* board information structure */
+
+ u32 iobase;
+ int idx = 0;
+
+ while (1) {
+ /* Find PCI device */
+ devno = pci_find_devices(uli526x_pci_tbl, idx++);
+ if (devno < 0)
+ break;
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+ iobase &= ~0xf;
+
+ dev = (struct eth_device *)malloc(sizeof *dev);
+ sprintf(dev->name, "uli526x#%d\n", card_number);
+ db = (struct uli526x_board_info *)
+ malloc(sizeof(struct uli526x_board_info));
+
+ dev->priv = db;
+ db->pdev = devno;
+ dev->iobase = iobase;
+
+ dev->init = uli526x_init_one;
+ dev->halt = uli526x_disable;
+ dev->send = uli526x_start_xmit;
+ dev->recv = uli526x_rx_packet;
+
+ /* init db */
+ db->ioaddr = dev->iobase;
+ /* get chip id */
+
+ pci_read_config_dword(devno, PCI_VENDOR_ID, &db->chip_id);
+#ifdef DEBUG
+ printf("uli526x: uli526x @0x%x\n", iobase);
+ printf("uli526x: chip_id%x\n", db->chip_id);
+#endif
+ eth_register(dev);
+ card_number++;
+ pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
+ udelay(10 * 1000);
+ }
+ return card_number;
+}
+
+static int uli526x_init_one(struct eth_device *dev, bd_t *bis)
+{
+
+ struct uli526x_board_info *db = dev->priv;
+ int i;
+
+ switch (mode) {
+ case ULI526X_10MHF:
+ case ULI526X_100MHF:
+ case ULI526X_10MFD:
+ case ULI526X_100MFD:
+ uli526x_media_mode = mode;
+ break;
+ default:
+ uli526x_media_mode = ULI526X_AUTO;
+ break;
+ }
+
+ /* Allocate Tx/Rx descriptor memory */
+ db->desc_pool_ptr = (uchar *)&desc_pool_array[0];
+ db->desc_pool_dma_ptr = (dma_addr_t)&desc_pool_array[0];
+ if (db->desc_pool_ptr == NULL)
+ return 0;
+
+ db->buf_pool_ptr = &buf_pool[0];
+ db->buf_pool_dma_ptr = (dma_addr_t)&buf_pool[0];
+ if (db->buf_pool_ptr == NULL)
+ return 0;
+
+ db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
+ db->first_tx_desc_dma = db->desc_pool_dma_ptr;
+
+ db->buf_pool_start = db->buf_pool_ptr;
+ db->buf_pool_dma_start = db->buf_pool_dma_ptr;
+
+#ifdef DEBUG
+ printf("%s(): db->ioaddr= 0x%x\n",
+ __FUNCTION__, db->ioaddr);
+ printf("%s(): media_mode= 0x%x\n",
+ __FUNCTION__, uli526x_media_mode);
+ printf("%s(): db->desc_pool_ptr= 0x%x\n",
+ __FUNCTION__, db->desc_pool_ptr);
+ printf("%s(): db->desc_pool_dma_ptr= 0x%x\n",
+ __FUNCTION__, db->desc_pool_dma_ptr);
+ printf("%s(): db->buf_pool_ptr= 0x%x\n",
+ __FUNCTION__, db->buf_pool_ptr);
+ printf("%s(): db->buf_pool_dma_ptr= 0x%x\n",
+ __FUNCTION__, db->buf_pool_dma_ptr);
+#endif
+
+ /* read 64 word srom data */
+ for (i = 0; i < 64; i++)
+ ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr,
+ i));
+
+ /* Set Node address */
+ if (((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0)
+ /* SROM absent, so write MAC address to ID Table */
+ set_mac_addr(dev);
+ else { /*Exist SROM*/
+ for (i = 0; i < 6; i++)
+ dev->enetaddr[i] = db->srom[20 + i];
+ }
+#ifdef DEBUG
+ for (i = 0; i < 6; i++)
+ printf("%c%02x", i ? ':' : ' ', dev->enetaddr[i]);
+#endif
+ db->PHY_reg4 = 0x1e0;
+
+ /* system variable init */
+ db->cr6_data = CR6_DEFAULT ;
+ db->cr6_data |= ULI526X_TXTH_256;
+ db->cr0_data = CR0_DEFAULT;
+ uli526x_init(dev);
+ return 1;
+}
+
+static void uli526x_disable(struct eth_device *dev)
+{
+#ifdef DEBUG
+ printf("uli526x_disable\n");
+#endif
+ struct uli526x_board_info *db = dev->priv;
+
+ if (!((inl(db->ioaddr + DCR12)) & 0x8)) {
+ /* Reset & stop ULI526X board */
+ outl(ULI526X_RESET, db->ioaddr + DCR0);
+ udelay(5);
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+
+ /* reset the board */
+ db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
+ update_cr6(db->cr6_data, dev->iobase);
+ outl(0, dev->iobase + DCR7); /* Disable Interrupt */
+ outl(inl(dev->iobase + DCR5), dev->iobase + DCR5);
+ }
+}
+
+/* Initialize ULI526X board
+ * Reset ULI526X board
+ * Initialize TX/Rx descriptor chain structure
+ * Send the set-up frame
+ * Enable Tx/Rx machine
+ */
+
+static void uli526x_init(struct eth_device *dev)
+{
+
+ struct uli526x_board_info *db = dev->priv;
+ u8 phy_tmp;
+ u16 phy_value;
+ u16 phy_reg_reset;
+
+ /* Reset M526x MAC controller */
+ outl(ULI526X_RESET, db->ioaddr + DCR0); /* RESET MAC */
+ udelay(100);
+ outl(db->cr0_data, db->ioaddr + DCR0);
+ udelay(5);
+
+ /* Phy addr : In some boards,M5261/M5263 phy address != 1 */
+ db->phy_addr = 1;
+ db->tx_packet_cnt = 0;
+ for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) {
+ /* peer add */
+ phy_value = phy_read(db->ioaddr, phy_tmp, 3, db->chip_id);
+ if (phy_value != 0xffff && phy_value != 0) {
+ db->phy_addr = phy_tmp;
+ break;
+ }
+ }
+
+#ifdef DEBUG
+ printf("%s(): db->ioaddr= 0x%x\n", __FUNCTION__, db->ioaddr);
+ printf("%s(): db->phy_addr= 0x%x\n", __FUNCTION__, db->phy_addr);
+#endif
+ if (phy_tmp == 32)
+ printf("Can not find the phy address!!!");
+
+ /* Parser SROM and media mode */
+ db->media_mode = uli526x_media_mode;
+
+ if (!(inl(db->ioaddr + DCR12) & 0x8)) {
+ /* Phyxcer capability setting */
+ phy_reg_reset = phy_read(db->ioaddr,
+ db->phy_addr, 0, db->chip_id);
+ phy_reg_reset = (phy_reg_reset | 0x8000);
+ phy_write(db->ioaddr, db->phy_addr, 0,
+ phy_reg_reset, db->chip_id);
+ udelay(500);
+
+ /* Process Phyxcer Media Mode */
+ uli526x_set_phyxcer(db);
+ }
+ /* Media Mode Process */
+ if (!(db->media_mode & ULI526X_AUTO))
+ db->op_mode = db->media_mode; /* Force Mode */
+
+ /* Initialize Transmit/Receive decriptor and CR3/4 */
+ uli526x_descriptor_init(db, db->ioaddr);
+
+ /* Init CR6 to program M526X operation */
+ update_cr6(db->cr6_data, db->ioaddr);
+
+ /* Init CR7, interrupt active bit */
+ db->cr7_data = CR7_DEFAULT;
+ outl(db->cr7_data, db->ioaddr + DCR7);
+
+ /* Init CR15, Tx jabber and Rx watchdog timer */
+ outl(db->cr15_data, db->ioaddr + DCR15);
+
+ /* Enable ULI526X Tx/Rx function */
+ db->cr6_data |= CR6_RXSC | CR6_TXSC;
+ update_cr6(db->cr6_data, db->ioaddr);
+ while (!(inl(db->ioaddr + DCR12) & 0x8))
+ udelay(10);
+}
+
+/*
+ * Hardware start transmission.
+ * Send a packet to media from the upper layer.
+ */
+
+static int uli526x_start_xmit(struct eth_device *dev,
+ volatile void *packet, int length)
+{
+ struct uli526x_board_info *db = dev->priv;
+ struct tx_desc *txptr;
+ unsigned int len = length;
+ /* Too large packet check */
+ if (len > MAX_PACKET_SIZE) {
+ printf(": big packet = %d\n", len);
+ return 0;
+ }
+
+ /* No Tx resource check, it never happen nromally */
+ if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
+ printf("No Tx resource %ld\n", db->tx_packet_cnt);
+ return 0;
+ }
+
+ /* Disable NIC interrupt */
+ outl(0, dev->iobase + DCR7);
+
+ /* transmit this packet */
+ txptr = db->tx_insert_ptr;
+ memcpy((char *)txptr->tx_buf_ptr, (char *)packet, (int)length);
+ txptr->tdes1 = cpu_to_le32(0xe1000000 | length);
+
+ /* Point to next transmit free descriptor */
+ db->tx_insert_ptr = txptr->next_tx_desc;
+
+ /* Transmit Packet Process */
+ if ((db->tx_packet_cnt < TX_DESC_CNT)) {
+ txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
+ db->tx_packet_cnt++; /* Ready to send */
+ outl(0x1, dev->iobase + DCR1); /* Issue Tx polling */
+ }
+
+ /* Got ULI526X status */
+ db->cr5_data = inl(db->ioaddr + DCR5);
+ outl(db->cr5_data, db->ioaddr + DCR5);
+
+#ifdef TX_DEBUG
+ printf("%s(): length = 0x%x\n", __FUNCTION__, length);
+ printf("%s(): cr5_data=%x\n", __FUNCTION__, db->cr5_data);
+#endif
+
+ outl(db->cr7_data, dev->iobase + DCR7);
+ uli526x_free_tx_pkt(dev, db);
+
+ return length;
+}
+
+/*
+ * Free TX resource after TX complete
+ */
+
+static void uli526x_free_tx_pkt(struct eth_device *dev,
+ struct uli526x_board_info *db)
+{
+ struct tx_desc *txptr;
+ u32 tdes0;
+
+ txptr = db->tx_remove_ptr;
+ while (db->tx_packet_cnt) {
+ tdes0 = le32_to_cpu(txptr->tdes0);
+ /* printf(DRV_NAME ": tdes0=%x\n", tdes0); */
+ if (tdes0 & 0x80000000)
+ break;
+
+ /* A packet sent completed */
+ db->tx_packet_cnt--;
+
+ if (tdes0 != 0x7fffffff) {
+#ifdef TX_DEBUG
+ printf("%s()tdes0=%x\n", __FUNCTION__, tdes0);
+#endif
+ if (tdes0 & TDES0_ERR_MASK) {
+ if (tdes0 & 0x0002) { /* UnderRun */
+ if (!(db->cr6_data & CR6_SFT)) {
+ db->cr6_data = db->cr6_data |
+ CR6_SFT;
+ update_cr6(db->cr6_data,
+ db->ioaddr);
+ }
+ }
+ }
+ }
+
+ txptr = txptr->next_tx_desc;
+ }/* End of while */
+
+ /* Update TX remove pointer to next */
+ db->tx_remove_ptr = txptr;
+}
+
+
+/*
+ * Receive the come packet and pass to upper layer
+ */
+
+static int uli526x_rx_packet(struct eth_device *dev)
+{
+ struct uli526x_board_info *db = dev->priv;
+ struct rx_desc *rxptr;
+ int rxlen = 0;
+ u32 rdes0;
+
+ rxptr = db->rx_ready_ptr;
+
+ rdes0 = le32_to_cpu(rxptr->rdes0);
+#ifdef RX_DEBUG
+ printf("%s(): rxptr->rdes0=%x:%x\n", __FUNCTION__, rxptr->rdes0);
+#endif
+ if (!(rdes0 & 0x80000000)) { /* packet owner check */
+ if ((rdes0 & 0x300) != 0x300) {
+ /* A packet without First/Last flag */
+ /* reuse this buf */
+ printf("A packet without First/Last flag");
+ uli526x_reuse_buf(rxptr);
+ } else {
+ /* A packet with First/Last flag */
+ rxlen = ((rdes0 >> 16) & 0x3fff) - 4;
+#ifdef RX_DEBUG
+ printf("%s(): rxlen =%x\n", __FUNCTION__, rxlen);
+#endif
+ /* error summary bit check */
+ if (rdes0 & 0x8000) {
+ /* This is a error packet */
+ printf("Eroor: rdes0: %lx\n", rdes0);
+ }
+
+ if (!(rdes0 & 0x8000) ||
+ ((db->cr6_data & CR6_PM) && (rxlen > 6))) {
+
+#ifdef RX_DEBUG
+ printf("%s(): rx_skb_ptr =%x\n",
+ __FUNCTION__, rxptr->rx_buf_ptr);
+ printf("%s(): rxlen =%x\n",
+ __FUNCTION__, rxlen);
+
+ printf("%s(): buf addr =%x\n",
+ __FUNCTION__, rxptr->rx_buf_ptr);
+ printf("%s(): rxlen =%x\n",
+ __FUNCTION__, rxlen);
+ int i;
+ for (i = 0; i < 0x20; i++)
+ printf("%s(): data[%x] =%x\n",
+ __FUNCTION__, i, rxptr->rx_buf_ptr[i]);
+#endif
+
+ NetReceive(rxptr->rx_buf_ptr, rxlen);
+ uli526x_reuse_buf(rxptr);
+
+ } else {
+ /* Reuse SKB buffer when the packet is error */
+ printf("Reuse buffer, rdes0");
+ uli526x_reuse_buf(rxptr);
+ }
+ }
+
+ rxptr = rxptr->next_rx_desc;
+ }
+
+ db->rx_ready_ptr = rxptr;
+ return rxlen;
+}
+
+/*
+ * Reuse the RX buffer
+ */
+
+static void uli526x_reuse_buf(struct rx_desc *rxptr)
+{
+
+ if (!(rxptr->rdes0 & cpu_to_le32(0x80000000)))
+ rxptr->rdes0 = cpu_to_le32(0x80000000);
+ else
+ printf("Buffer reuse method error");
+}
+/*
+ * Initialize transmit/Receive descriptor
+ * Using Chain structure, and allocate Tx/Rx buffer
+ */
+
+static void uli526x_descriptor_init(struct uli526x_board_info *db,
+ unsigned long ioaddr)
+{
+ struct tx_desc *tmp_tx;
+ struct rx_desc *tmp_rx;
+ unsigned char *tmp_buf;
+ dma_addr_t tmp_tx_dma, tmp_rx_dma;
+ dma_addr_t tmp_buf_dma;
+ int i;
+ /* tx descriptor start pointer */
+ db->tx_insert_ptr = db->first_tx_desc;
+ db->tx_remove_ptr = db->first_tx_desc;
+
+ outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
+
+ /* rx descriptor start pointer */
+ db->first_rx_desc = (void *)db->first_tx_desc +
+ sizeof(struct tx_desc) * TX_DESC_CNT;
+ db->first_rx_desc_dma = db->first_tx_desc_dma +
+ sizeof(struct tx_desc) * TX_DESC_CNT;
+ db->rx_ready_ptr = db->first_rx_desc;
+ outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
+#ifdef DEBUG
+ printf("%s(): db->first_tx_desc= 0x%x\n",
+ __FUNCTION__, db->first_tx_desc);
+ printf("%s(): db->first_rx_desc_dma= 0x%x\n",
+ __FUNCTION__, db->first_rx_desc_dma);
+#endif
+ /* Init Transmit chain */
+ tmp_buf = db->buf_pool_start;
+ tmp_buf_dma = db->buf_pool_dma_start;
+ tmp_tx_dma = db->first_tx_desc_dma;
+ for (tmp_tx = db->first_tx_desc, i = 0;
+ i < TX_DESC_CNT; i++, tmp_tx++) {
+ tmp_tx->tx_buf_ptr = tmp_buf;
+ tmp_tx->tdes0 = cpu_to_le32(0);
+ tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
+ tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
+ tmp_tx_dma += sizeof(struct tx_desc);
+ tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
+ tmp_tx->next_tx_desc = tmp_tx + 1;
+ tmp_buf = tmp_buf + TX_BUF_ALLOC;
+ tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
+ }
+ (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
+ tmp_tx->next_tx_desc = db->first_tx_desc;
+
+ /* Init Receive descriptor chain */
+ tmp_rx_dma = db->first_rx_desc_dma;
+ for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT;
+ i++, tmp_rx++) {
+ tmp_rx->rdes0 = cpu_to_le32(0);
+ tmp_rx->rdes1 = cpu_to_le32(0x01000600);
+ tmp_rx_dma += sizeof(struct rx_desc);
+ tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
+ tmp_rx->next_rx_desc = tmp_rx + 1;
+ }
+ (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
+ tmp_rx->next_rx_desc = db->first_rx_desc;
+
+ /* pre-allocate Rx buffer */
+ allocate_rx_buffer(db);
+}
+
+/*
+ * Update CR6 value
+ * Firstly stop ULI526X, then written value and start
+ */
+
+static void update_cr6(u32 cr6_data, unsigned long ioaddr)
+{
+
+ outl(cr6_data, ioaddr + DCR6);
+ udelay(5);
+}
+
+/*
+ * Allocate rx buffer,
+ */
+
+static void allocate_rx_buffer(struct uli526x_board_info *db)
+{
+ int index;
+ struct rx_desc *rxptr;
+ rxptr = db->first_rx_desc;
+ u32 addr;
+
+ for (index = 0; index < RX_DESC_CNT; index++) {
+ addr = (u32)NetRxPackets[index];
+ addr += (16 - (addr & 15));
+ rxptr->rx_buf_ptr = (char *) addr;
+ rxptr->rdes2 = cpu_to_le32(addr);
+ rxptr->rdes0 = cpu_to_le32(0x80000000);
+#ifdef DEBUG
+ printf("%s(): Number 0x%x:\n", __FUNCTION__, index);
+ printf("%s(): addr 0x%x:\n", __FUNCTION__, addr);
+ printf("%s(): rxptr address = 0x%x\n", __FUNCTION__, rxptr);
+ printf("%s(): rxptr buf address = 0x%x\n", \
+ __FUNCTION__, rxptr->rx_buf_ptr);
+ printf("%s(): rdes2 = 0x%x\n", __FUNCTION__, rxptr->rdes2);
+#endif
+ rxptr = rxptr->next_rx_desc;
+ }
+}
+
+/*
+ * Read one word data from the serial ROM
+ */
+
+static u16 read_srom_word(long ioaddr, int offset)
+{
+ int i;
+ u16 srom_data = 0;
+ long cr9_ioaddr = ioaddr + DCR9;
+
+ outl(CR9_SROM_READ, cr9_ioaddr);
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+ /* Send the Read Command 110b */
+ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+ SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
+
+ /* Send the offset */
+ for (i = 5; i >= 0; i--) {
+ srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
+ SROM_CLK_WRITE(srom_data, cr9_ioaddr);
+ }
+
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+ for (i = 16; i > 0; i--) {
+ outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
+ udelay(5);
+ srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT)
+ ? 1 : 0);
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+ udelay(5);
+ }
+
+ outl(CR9_SROM_READ, cr9_ioaddr);
+ return srom_data;
+}
+
+/*
+ * Set 10/100 phyxcer capability
+ * AUTO mode : phyxcer register4 is NIC capability
+ * Force mode: phyxcer register4 is the force media
+ */
+
+static void uli526x_set_phyxcer(struct uli526x_board_info *db)
+{
+ u16 phy_reg;
+
+ /* Phyxcer capability setting */
+ phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+
+ if (db->media_mode & ULI526X_AUTO) {
+ /* AUTO Mode */
+ phy_reg |= db->PHY_reg4;
+ } else {
+ /* Force Mode */
+ switch (db->media_mode) {
+ case ULI526X_10MHF: phy_reg |= 0x20; break;
+ case ULI526X_10MFD: phy_reg |= 0x40; break;
+ case ULI526X_100MHF: phy_reg |= 0x80; break;
+ case ULI526X_100MFD: phy_reg |= 0x100; break;
+ }
+
+ }
+
+ /* Write new capability to Phyxcer Reg4 */
+ if (!(phy_reg & 0x01e0)) {
+ phy_reg |= db->PHY_reg4;
+ db->media_mode |= ULI526X_AUTO;
+ }
+ phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+
+ /* Restart Auto-Negotiation */
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+ udelay(50);
+}
+
+/*
+ * Write a word to Phy register
+ */
+
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+ u16 phy_data, u32 chip_id)
+{
+ u16 i;
+ unsigned long ioaddr;
+
+ if (chip_id == PCI_ULI5263_ID) {
+ phy_writeby_cr10(iobase, phy_addr, offset, phy_data);
+ return;
+ }
+ /* M5261/M5263 Chip */
+ ioaddr = iobase + DCR9;
+
+ /* Send 33 synchronization clock to Phy controller */
+ for (i = 0; i < 35; i++)
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send start command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send write command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send Phy address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, phy_addr & i ?
+ PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* Send register address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, offset & i ?
+ PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* written trasnition */
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+ /* Write a word data to PHY controller */
+ for (i = 0x8000; i > 0; i >>= 1)
+ phy_write_1bit(ioaddr, phy_data & i ?
+ PHY_DATA_1 : PHY_DATA_0, chip_id);
+}
+
+/*
+ * Read a word data from phy register
+ */
+
+static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+{
+ int i;
+ u16 phy_data;
+ unsigned long ioaddr;
+
+ if (chip_id == PCI_ULI5263_ID)
+ return phy_readby_cr10(iobase, phy_addr, offset);
+ /* M5261/M5263 Chip */
+ ioaddr = iobase + DCR9;
+
+ /* Send 33 synchronization clock to Phy controller */
+ for (i = 0; i < 35; i++)
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send start command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send read command(10) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+ /* Send Phy address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, phy_addr & i ?
+ PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* Send register address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, offset & i ?
+ PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* Skip transition state */
+ phy_read_1bit(ioaddr, chip_id);
+
+ /* read 16bit data */
+ for (phy_data = 0, i = 0; i < 16; i++) {
+ phy_data <<= 1;
+ phy_data |= phy_read_1bit(ioaddr, chip_id);
+ }
+
+ return phy_data;
+}
+
+static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
+{
+ unsigned long ioaddr, cr10_value;
+
+ ioaddr = iobase + DCR10;
+ cr10_value = phy_addr;
+ cr10_value = (cr10_value<<5) + offset;
+ cr10_value = (cr10_value<<16) + 0x08000000;
+ outl(cr10_value, ioaddr);
+ udelay(1);
+ while (1) {
+ cr10_value = inl(ioaddr);
+ if (cr10_value & 0x10000000)
+ break;
+ }
+ return (cr10_value&0x0ffff);
+}
+
+static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr,
+ u8 offset, u16 phy_data)
+{
+ unsigned long ioaddr, cr10_value;
+
+ ioaddr = iobase + DCR10;
+ cr10_value = phy_addr;
+ cr10_value = (cr10_value<<5) + offset;
+ cr10_value = (cr10_value<<16) + 0x04000000 + phy_data;
+ outl(cr10_value, ioaddr);
+ udelay(1);
+}
+/*
+ * Write one bit data to Phy Controller
+ */
+
+static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id)
+{
+ outl(phy_data , ioaddr); /* MII Clock Low */
+ udelay(1);
+ outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */
+ udelay(1);
+ outl(phy_data , ioaddr); /* MII Clock Low */
+ udelay(1);
+}
+
+/*
+ * Read one bit phy data from PHY controller
+ */
+
+static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
+{
+ u16 phy_data;
+
+ outl(0x50000 , ioaddr);
+ udelay(1);
+ phy_data = (inl(ioaddr) >> 19) & 0x1;
+ outl(0x40000 , ioaddr);
+ udelay(1);
+
+ return phy_data;
+}
+
+/*
+ * Set MAC address to ID Table
+ */
+
+static void set_mac_addr(struct eth_device *dev)
+{
+ int i;
+ u16 addr;
+ struct uli526x_board_info *db = dev->priv;
+ outl(0x10000, db->ioaddr + DCR0); /* Diagnosis mode */
+ /* Reset dianostic pointer port */
+ outl(0x1c0, db->ioaddr + DCR13);
+ outl(0, db->ioaddr + DCR14); /* Clear reset port */
+ outl(0x10, db->ioaddr + DCR14); /* Reset ID Table pointer */
+ outl(0, db->ioaddr + DCR14); /* Clear reset port */
+ outl(0, db->ioaddr + DCR13); /* Clear CR13 */
+ /* Select ID Table access port */
+ outl(0x1b0, db->ioaddr + DCR13);
+ /* Read MAC address from CR14 */
+ for (i = 0; i < 3; i++) {
+ addr = dev->enetaddr[2 * i] | (dev->enetaddr[2 * i + 1] << 8);
+ outl(addr, db->ioaddr + DCR14);
+ }
+ /* write end */
+ outl(0, db->ioaddr + DCR13); /* Clear CR13 */
+ outl(0, db->ioaddr + DCR0); /* Clear CR0 */
+ udelay(10);
+ return;
+}
+#endif