diff options
Diffstat (limited to 'drivers/phy/marvell')
-rw-r--r-- | drivers/phy/marvell/comphy.h | 3 | ||||
-rw-r--r-- | drivers/phy/marvell/comphy_core.c | 16 | ||||
-rw-r--r-- | drivers/phy/marvell/comphy_cp110.c | 449 | ||||
-rw-r--r-- | drivers/phy/marvell/comphy_hpipe.h | 277 | ||||
-rw-r--r-- | drivers/phy/marvell/comphy_mux.c | 7 |
5 files changed, 664 insertions, 88 deletions
diff --git a/drivers/phy/marvell/comphy.h b/drivers/phy/marvell/comphy.h index 0a15692..c9b94a4 100644 --- a/drivers/phy/marvell/comphy.h +++ b/drivers/phy/marvell/comphy.h @@ -86,6 +86,7 @@ struct comphy_map { u32 speed; u32 invert; bool clk_src; + bool end_point; }; struct chip_serdes_phy_config { @@ -96,7 +97,7 @@ struct chip_serdes_phy_config { void __iomem *hpipe3_base_addr; u32 comphy_lanes_count; u32 comphy_mux_bitcount; - u32 comphy_index; + u32 cp_index; }; /* Register helper functions */ diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c index caa1928..596921b 100644 --- a/drivers/phy/marvell/comphy_core.c +++ b/drivers/phy/marvell/comphy_core.c @@ -37,7 +37,7 @@ static char *get_type_string(u32 type) "SGMII1", "SGMII2", "SGMII3", "QSGMII", "USB3_HOST0", "USB3_HOST1", "USB3_DEVICE", "XAUI0", "XAUI1", "XAUI2", "XAUI3", - "RXAUI0", "RXAUI1", "KR"}; + "RXAUI0", "RXAUI1", "SFI", "IGNORE"}; if (type < 0 || type > PHY_TYPE_MAX) return "invalid"; @@ -90,9 +90,6 @@ void comphy_print(struct chip_serdes_phy_config *chip_cfg, for (lane = 0; lane < chip_cfg->comphy_lanes_count; lane++, comphy_map_data++) { - if (comphy_map_data->type == PHY_TYPE_UNCONNECTED) - continue; - if (comphy_map_data->speed == PHY_SPEED_INVALID) { printf("Comphy-%d: %-13s\n", lane, get_type_string(comphy_map_data->type)); @@ -113,6 +110,7 @@ static int comphy_probe(struct udevice *dev) int subnode; int lane; int last_idx = 0; + static int current_idx; /* Save base addresses for later use */ chip_cfg->comphy_base_addr = (void *)dev_get_addr_index(dev, 0); @@ -166,6 +164,8 @@ static int comphy_probe(struct udevice *dev) blob, subnode, "phy-invert", PHY_POLARITY_NO_INVERT); comphy_map_data[lane].clk_src = fdtdec_get_bool(blob, subnode, "clk-src"); + comphy_map_data[lane].end_point = fdtdec_get_bool(blob, subnode, + "end_point"); if (comphy_map_data[lane].type == PHY_TYPE_INVALID) { printf("no phy type for lane %d, setting lane as unconnected\n", lane + 1); @@ -174,13 +174,13 @@ static int comphy_probe(struct udevice *dev) lane++; } - /* Save comphy index for MultiCP devices (A8K) */ - chip_cfg->comphy_index = dev->seq; + /* Save CP index for MultiCP devices (A8K) */ + chip_cfg->cp_index = current_idx++; /* PHY power UP sequence */ chip_cfg->ptr_comphy_chip_init(chip_cfg, comphy_map_data); /* PHY print SerDes status */ if (of_machine_is_compatible("marvell,armada8040")) - printf("Comphy chip #%d:\n", chip_cfg->comphy_index); + printf("Comphy chip #%d:\n", chip_cfg->cp_index); comphy_print(chip_cfg, comphy_map_data); /* @@ -189,7 +189,7 @@ static int comphy_probe(struct udevice *dev) if (of_machine_is_compatible("marvell,armada8040")) last_idx = 1; - if (chip_cfg->comphy_index == last_idx) { + if (chip_cfg->cp_index == last_idx) { /* Initialize dedicated PHYs (not muxed SerDes lanes) */ comphy_dedicated_phys_init(); } diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c index 25c067d..3ac405a 100644 --- a/drivers/phy/marvell/comphy_cp110.c +++ b/drivers/phy/marvell/comphy_cp110.c @@ -34,26 +34,23 @@ struct utmi_phy_data { * PIPE selector include USB and PCIe options. * PHY selector include the Ethernet and SATA options, every Ethernet * option has different options, for example: serdes lane2 had option - * Eth_port_0 that include (SGMII0, XAUI0, RXAUI0, KR) + * Eth_port_0 that include (SGMII0, RXAUI0, SFI) */ struct comphy_mux_data cp110_comphy_phy_mux_data[] = { - {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 0 */ - {PHY_TYPE_XAUI2, 0x1}, {PHY_TYPE_SATA1, 0x4} } }, - {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII3, 0x1}, /* Lane 1 */ - {PHY_TYPE_XAUI3, 0x1}, {PHY_TYPE_SATA0, 0x4} } }, + {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII1, 0x1}, /* Lane 0 */ + {PHY_TYPE_SATA1, 0x4} } }, + {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 1 */ + {PHY_TYPE_SATA0, 0x4} } }, {6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x1}, /* Lane 2 */ - {PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1}, - {PHY_TYPE_KR, 0x1}, {PHY_TYPE_SATA0, 0x4} } }, - {8, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x1}, /* Lane 3 */ - {PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1}, - {PHY_TYPE_KR, 0x1}, {PHY_TYPE_XAUI1, 0x1}, - {PHY_TYPE_RXAUI1, 0x1}, {PHY_TYPE_SATA1, 0x4} } }, + {PHY_TYPE_RXAUI0, 0x1}, {PHY_TYPE_SFI, 0x1}, + {PHY_TYPE_SATA0, 0x4} } }, + {8, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_RXAUI1, 0x1}, /* Lane 3 */ + {PHY_TYPE_SGMII1, 0x2}, {PHY_TYPE_SATA1, 0x4} } }, {7, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x2}, /* Lane 4 */ - {PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1}, {PHY_TYPE_KR, 0x1}, - {PHY_TYPE_SGMII2, 0x1}, {PHY_TYPE_XAUI2, 0x1} } }, - {6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_XAUI1, 0x1}, /* Lane 5 */ - {PHY_TYPE_RXAUI1, 0x1}, {PHY_TYPE_SGMII3, 0x1}, - {PHY_TYPE_XAUI3, 0x1}, {PHY_TYPE_SATA1, 0x4} } }, + {PHY_TYPE_RXAUI0, 0x2}, {PHY_TYPE_SFI, 0x2}, + {PHY_TYPE_SGMII1, 0x1} } }, + {6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 5 */ + {PHY_TYPE_RXAUI1, 0x2}, {PHY_TYPE_SATA1, 0x4} } }, }; struct comphy_mux_data cp110_comphy_pipe_mux_data[] = { @@ -87,8 +84,8 @@ static u32 polling_with_timeout(void __iomem *addr, u32 val, return 0; } -static int comphy_pcie_power_up(u32 lane, u32 pcie_width, - bool clk_src, void __iomem *hpipe_base, +static int comphy_pcie_power_up(u32 lane, u32 pcie_width, bool clk_src, + bool is_end_point, void __iomem *hpipe_base, void __iomem *comphy_base) { u32 mask, data, ret = 1; @@ -109,6 +106,7 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, * and SerDes Lane 0 got PCIe ref-clock #0 */ debug("PCIe clock = %x\n", pcie_clk); + debug("PCIe RC = %d\n", !is_end_point); debug("PCIe width = %d\n", pcie_width); /* enable PCIe by4 and by2 */ @@ -234,6 +232,8 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, mask |= HPIPE_MISC_REFCLK_SEL_MASK; data |= 0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET; } + mask |= HPIPE_MISC_ICP_FORCE_MASK; + data |= 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET; reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask); if (pcie_clk) { /* output */ /* Set reference frequcency select - 0x2 for 25MHz*/ @@ -269,6 +269,9 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, /* Set Maximal PHY Generation Setting(8Gbps) */ mask = HPIPE_INTERFACE_GEN_MAX_MASK; data = 0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET; + /* Bypass frame detection and sync detection for RX DATA */ + mask = HPIPE_INTERFACE_DET_BYPASS_MASK; + data = 0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET; /* Set Link Train Mode (Tx training control pins are used) */ mask |= HPIPE_INTERFACE_LINK_TRAIN_MASK; data |= 0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET; @@ -353,21 +356,21 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, data = 0x3 << HPIPE_G3_DFE_RES_OFFSET; reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask); - /* Force DFE resolution (use GEN table value) */ + /* Use TX/RX training result for DFE */ mask = HPIPE_DFE_RES_FORCE_MASK; - data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET; + data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET; reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask); /* Configure initial and final coefficient value for receiver */ - mask = HPIPE_G3_RX_SELMUPI_MASK; - data = 0x1 << HPIPE_G3_RX_SELMUPI_OFFSET; + mask = HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK; + data = 0x1 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET; - mask |= HPIPE_G3_RX_SELMUPF_MASK; - data |= 0x1 << HPIPE_G3_RX_SELMUPF_OFFSET; + mask |= HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK; + data |= 0x1 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET; - mask |= HPIPE_G3_SETTING_BIT_MASK; - data |= 0x0 << HPIPE_G3_SETTING_BIT_OFFSET; - reg_set(hpipe_addr + HPIPE_G3_SETTINGS_1_REG, data, mask); + mask |= HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK; + data |= 0x0 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_G3_SET_1_REG, data, mask); /* Trigger sampler enable pulse */ mask = HPIPE_SMAPLER_MASK; @@ -381,13 +384,70 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, data = 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET; mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK; - data |= 0x1 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET; + data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET; reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask); - /* Set phy in root complex mode */ - mask = HPIPE_CFG_PHY_RC_EP_MASK; - data = 0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET; - reg_set(hpipe_addr + HPIPE_LANE_EQU_CONFIG_0_REG, data, mask); + /* Pattern lock lost timeout disable */ + mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK; + data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask); + + /* Configure DFE adaptations */ + mask = HPIPE_CDR_MAX_DFE_ADAPT_1_MASK; + data = 0x1 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET; + mask |= HPIPE_CDR_MAX_DFE_ADAPT_0_MASK; + data |= 0x0 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET; + mask |= HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK; + data |= 0x0 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET; + reg_set(hpipe_addr + HPIPE_CDR_CONTROL_REG, data, mask); + mask = HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK; + data = 0x0 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET; + reg_set(hpipe_addr + HPIPE_DFE_CONTROL_REG, data, mask); + + /* Genration 2 setting 1*/ + mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK; + data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET; + mask |= HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK; + data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET; + mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK; + data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET; + reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask); + + /* DFE enable */ + mask = HPIPE_G2_DFE_RES_MASK; + data = 0x3 << HPIPE_G2_DFE_RES_OFFSET; + reg_set(hpipe_addr + HPIPE_G2_SETTINGS_4_REG, data, mask); + + /* Configure DFE Resolution */ + mask = HPIPE_LANE_CFG4_DFE_EN_SEL_MASK; + data = 0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET; + reg_set(hpipe_addr + HPIPE_LANE_CFG4_REG, data, mask); + + /* VDD calibration control */ + mask = HPIPE_EXT_SELLV_RXSAMPL_MASK; + data = 0x16 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET; + reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask); + + /* Set PLL Charge-pump Current Control */ + mask = HPIPE_G3_SETTING_5_G3_ICP_MASK; + data = 0x4 << HPIPE_G3_SETTING_5_G3_ICP_OFFSET; + reg_set(hpipe_addr + HPIPE_G3_SETTING_5_REG, data, mask); + + /* Set lane rqualization remote setting */ + mask = HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK; + data = 0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET; + mask |= HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK; + data |= 0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET; + mask |= HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK; + data |= 0x2 << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET; + reg_set(hpipe_addr + HPIPE_LANE_EQ_REMOTE_SETTING_REG, data, mask); + + if (!is_end_point) { + /* Set phy in root complex mode */ + mask = HPIPE_CFG_PHY_RC_EP_MASK; + data = 0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET; + reg_set(hpipe_addr + HPIPE_LANE_EQU_CONFIG_0_REG, data, mask); + } debug("stage: Comphy power up\n"); @@ -582,7 +642,7 @@ static int comphy_usb3_power_up(u32 lane, void __iomem *hpipe_base, } static int comphy_sata_power_up(u32 lane, void __iomem *hpipe_base, - void __iomem *comphy_base, int comphy_index) + void __iomem *comphy_base, int cp_index) { u32 mask, data, i, ret = 1; void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane); @@ -601,7 +661,7 @@ static int comphy_sata_power_up(u32 lane, void __iomem *hpipe_base, * In order to parse each CPs SATA node, fdt_node_offset_by_compatible * must be called again (according to the CP id) */ - for (i = 0; i < (comphy_index + 1); i++) + for (i = 0; i < (cp_index + 1); i++) sata_node = fdt_node_offset_by_compatible( gd->fdt_blob, sata_node, "marvell,armada-8k-ahci"); @@ -690,10 +750,176 @@ static int comphy_sata_power_up(u32 lane, void __iomem *hpipe_base, 0x2 << HPIPE_LOOPBACK_SEL_OFFSET, HPIPE_LOOPBACK_SEL_MASK); debug("stage: Analog paramters from ETP(HW)\n"); - /* - * TODO: Set analog paramters from ETP(HW) - for now use the - * default datas - */ + /* Set analog parameters from ETP(HW) */ + /* G1 settings */ + mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK; + data = 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK; + data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK; + data |= 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK; + data |= 0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK; + data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET; + reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask); + + mask = HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK; + data = 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET; + mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK; + data |= 0x2 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET; + mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK; + data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET; + mask |= HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_MASK; + data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET; + mask |= HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_MASK; + data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET; + reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask); + + /* G2 settings */ + mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK; + data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET; + mask |= HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK; + data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET; + mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK; + data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET; + mask |= HPIPE_G2_SET_1_G2_RX_SELMUFF_MASK; + data |= 0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET; + mask |= HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_MASK; + data |= 0x1 << HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET; + reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask); + + /* G3 settings */ + mask = HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK; + data = 0x2 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET; + mask |= HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK; + data |= 0x2 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET; + mask |= HPIPE_G3_SET_1_G3_RX_SELMUFI_MASK; + data |= 0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET; + mask |= HPIPE_G3_SET_1_G3_RX_SELMUFF_MASK; + data |= 0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET; + mask |= HPIPE_G3_SET_1_G3_RX_DFE_EN_MASK; + data |= 0x1 << HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET; + mask |= HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_MASK; + data |= 0x2 << HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET; + mask |= HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK; + data |= 0x0 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_G3_SET_1_REG, data, mask); + + /* DTL Control */ + mask = HPIPE_PWR_CTR_DTL_SQ_DET_EN_MASK; + data = 0x1 << HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET; + mask |= HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_MASK; + data |= 0x1 << HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET; + mask |= HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK; + data |= 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET; + mask |= HPIPE_PWR_CTR_DTL_CLAMPING_SEL_MASK; + data |= 0x1 << HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET; + mask |= HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_MASK; + data |= 0x1 << HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET; + mask |= HPIPE_PWR_CTR_DTL_CLK_MODE_MASK; + data |= 0x1 << HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET; + mask |= HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_MASK; + data |= 0x1 << HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET; + reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask); + + /* Trigger sampler enable pulse (by toggleing the bit) */ + mask = HPIPE_SMAPLER_MASK; + data = 0x1 << HPIPE_SMAPLER_OFFSET; + reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask); + mask = HPIPE_SMAPLER_MASK; + data = 0x0 << HPIPE_SMAPLER_OFFSET; + reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask); + + /* VDD Calibration Control 3 */ + mask = HPIPE_EXT_SELLV_RXSAMPL_MASK; + data = 0x10 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET; + reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask); + + /* DFE Resolution Control */ + mask = HPIPE_DFE_RES_FORCE_MASK; + data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET; + reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask); + + /* DFE F3-F5 Coefficient Control */ + mask = HPIPE_DFE_F3_F5_DFE_EN_MASK; + data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET; + mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK; + data = 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET; + reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask); + + /* G3 Setting 3 */ + mask = HPIPE_G3_FFE_CAP_SEL_MASK; + data = 0xf << HPIPE_G3_FFE_CAP_SEL_OFFSET; + mask |= HPIPE_G3_FFE_RES_SEL_MASK; + data |= 0x4 << HPIPE_G3_FFE_RES_SEL_OFFSET; + mask |= HPIPE_G3_FFE_SETTING_FORCE_MASK; + data |= 0x1 << HPIPE_G3_FFE_SETTING_FORCE_OFFSET; + mask |= HPIPE_G3_FFE_DEG_RES_LEVEL_MASK; + data |= 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET; + mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK; + data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET; + reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask); + + /* G3 Setting 4 */ + mask = HPIPE_G3_DFE_RES_MASK; + data = 0x2 << HPIPE_G3_DFE_RES_OFFSET; + reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask); + + /* Offset Phase Control */ + mask = HPIPE_OS_PH_OFFSET_MASK; + data = 0x5c << HPIPE_OS_PH_OFFSET_OFFSET; + mask |= HPIPE_OS_PH_OFFSET_FORCE_MASK; + data |= 0x1 << HPIPE_OS_PH_OFFSET_FORCE_OFFSET; + reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask); + mask = HPIPE_OS_PH_VALID_MASK; + data = 0x1 << HPIPE_OS_PH_VALID_OFFSET; + reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask); + mask = HPIPE_OS_PH_VALID_MASK; + data = 0x0 << HPIPE_OS_PH_VALID_OFFSET; + reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask); + + /* Set G1 TX amplitude and TX post emphasis value */ + mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK; + data = 0x8 << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET; + mask |= HPIPE_G1_SET_0_G1_TX_AMP_ADJ_MASK; + data |= 0x1 << HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET; + mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK; + data |= 0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET; + mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_EN_MASK; + data |= 0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask); + + /* Set G2 TX amplitude and TX post emphasis value */ + mask = HPIPE_G2_SET_0_G2_TX_AMP_MASK; + data = 0xa << HPIPE_G2_SET_0_G2_TX_AMP_OFFSET; + mask |= HPIPE_G2_SET_0_G2_TX_AMP_ADJ_MASK; + data |= 0x1 << HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET; + mask |= HPIPE_G2_SET_0_G2_TX_EMPH1_MASK; + data |= 0x2 << HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET; + mask |= HPIPE_G2_SET_0_G2_TX_EMPH1_EN_MASK; + data |= 0x1 << HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_G2_SET_0_REG, data, mask); + + /* Set G3 TX amplitude and TX post emphasis value */ + mask = HPIPE_G3_SET_0_G3_TX_AMP_MASK; + data = 0xe << HPIPE_G3_SET_0_G3_TX_AMP_OFFSET; + mask |= HPIPE_G3_SET_0_G3_TX_AMP_ADJ_MASK; + data |= 0x1 << HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET; + mask |= HPIPE_G3_SET_0_G3_TX_EMPH1_MASK; + data |= 0x6 << HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET; + mask |= HPIPE_G3_SET_0_G3_TX_EMPH1_EN_MASK; + data |= 0x1 << HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET; + mask |= HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_MASK; + data |= 0x4 << HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET; + mask |= HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_MASK; + data |= 0x0 << HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_G3_SET_0_REG, data, mask); + + /* SERDES External Configuration 2 register */ + mask = SD_EXTERNAL_CONFIG2_SSC_ENABLE_MASK; + data = 0x1 << SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG, data, mask); /* DFE reset sequence */ reg_set(hpipe_addr + HPIPE_PWR_CTR_REG, @@ -907,8 +1133,8 @@ static int comphy_sgmii_power_up(u32 lane, u32 sgmii_speed, return ret; } -static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base, - void __iomem *comphy_base) +static int comphy_sfi_power_up(u32 lane, void __iomem *hpipe_base, + void __iomem *comphy_base, u32 speed) { u32 mask, data, ret = 1; void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane); @@ -963,7 +1189,9 @@ static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base, debug("stage: Comphy configuration\n"); /* set reference clock */ mask = HPIPE_MISC_ICP_FORCE_MASK; - data = 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET; + data = (speed == PHY_SPEED_5_15625G) ? + (0x0 << HPIPE_MISC_ICP_FORCE_OFFSET) : + (0x1 << HPIPE_MISC_ICP_FORCE_OFFSET); mask |= HPIPE_MISC_REFCLK_SEL_MASK; data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET; reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask); @@ -988,6 +1216,22 @@ static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base, data = 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET; reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask); + /* Transmitter/Receiver Speed Divider Force */ + if (speed == PHY_SPEED_5_15625G) { + mask = HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_MASK; + data = 1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET; + mask |= HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_MASK; + data |= 1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET; + mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_MASK; + data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET; + mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK; + data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET; + } else { + mask = HPIPE_TXDIGCK_DIV_FORCE_MASK; + data = 0x1 << HPIPE_TXDIGCK_DIV_FORCE_OFFSET; + } + reg_set(hpipe_addr + HPIPE_SPD_DIV_FORCE_REG, data, mask); + /* Set analog paramters from ETP(HW) */ debug("stage: Analog paramters from ETP(HW)\n"); /* SERDES External Configuration 2 */ @@ -999,10 +1243,15 @@ static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base, data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET; reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask); /* 0xd-G1_Setting_0 */ - mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK; - data = 0x1c << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET; - mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK; - data |= 0xe << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET; + if (speed == PHY_SPEED_5_15625G) { + mask = HPIPE_G1_SET_0_G1_TX_EMPH1_MASK; + data = 0x6 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET; + } else { + mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK; + data = 0x1c << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET; + mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK; + data |= 0xe << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET; + } reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask); /* Genration 1 setting 2 (G1_Setting_2) */ mask = HPIPE_G1_SET_2_G1_TX_EMPH0_MASK; @@ -1027,13 +1276,27 @@ static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base, data = 0 << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET; reg_set(hpipe_addr + HPIPE_G1_SETTING_5_REG, data, mask); /* 0xE-G1_Setting_1 */ - mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK; - data = 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET; - mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK; - data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET; - mask |= HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK; - data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET; + mask = HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK; + data = 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET; + if (speed == PHY_SPEED_5_15625G) { + mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK; + data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK; + data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET; + } else { + mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK; + data |= 0x2 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK; + data |= 0x2 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK; + data |= 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK; + data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK; + data |= 0x3 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET; + } reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask); + /* 0xA-DFE_Reg3 */ mask = HPIPE_DFE_F3_F5_DFE_EN_MASK; data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET; @@ -1048,8 +1311,74 @@ static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base, /* Genration 1 setting 3 (G1_Setting_3) */ mask = HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK; data = 0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET; + if (speed == PHY_SPEED_5_15625G) { + /* Force FFE (Feed Forward Equalization) to 5G */ + mask |= HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK; + data |= 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET; + mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK; + data |= 0x4 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET; + mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK; + data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET; + } reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask); + /* Connfigure RX training timer */ + mask = HPIPE_RX_TRAIN_TIMER_MASK; + data = 0x13 << HPIPE_RX_TRAIN_TIMER_OFFSET; + reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_5_REG, data, mask); + + /* Enable TX train peak to peak hold */ + mask = HPIPE_TX_TRAIN_P2P_HOLD_MASK; + data = 0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET; + reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_0_REG, data, mask); + + /* Configure TX preset index */ + mask = HPIPE_TX_PRESET_INDEX_MASK; + data = 0x2 << HPIPE_TX_PRESET_INDEX_OFFSET; + reg_set(hpipe_addr + HPIPE_TX_PRESET_INDEX_REG, data, mask); + + /* Disable pattern lock lost timeout */ + mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK; + data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask); + + /* Configure TX training pattern and TX training 16bit auto */ + mask = HPIPE_TX_TRAIN_16BIT_AUTO_EN_MASK; + data = 0x1 << HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET; + mask |= HPIPE_TX_TRAIN_PAT_SEL_MASK; + data |= 0x1 << HPIPE_TX_TRAIN_PAT_SEL_OFFSET; + reg_set(hpipe_addr + HPIPE_TX_TRAIN_REG, data, mask); + + /* Configure Training patten number */ + mask = HPIPE_TRAIN_PAT_NUM_MASK; + data = 0x88 << HPIPE_TRAIN_PAT_NUM_OFFSET; + reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_0_REG, data, mask); + + /* Configure differencial manchester encoter to ethernet mode */ + mask = HPIPE_DME_ETHERNET_MODE_MASK; + data = 0x1 << HPIPE_DME_ETHERNET_MODE_OFFSET; + reg_set(hpipe_addr + HPIPE_DME_REG, data, mask); + + /* Configure VDD Continuous Calibration */ + mask = HPIPE_CAL_VDD_CONT_MODE_MASK; + data = 0x1 << HPIPE_CAL_VDD_CONT_MODE_OFFSET; + reg_set(hpipe_addr + HPIPE_VDD_CAL_0_REG, data, mask); + + /* Trigger sampler enable pulse (by toggleing the bit) */ + mask = HPIPE_RX_SAMPLER_OS_GAIN_MASK; + data = 0x3 << HPIPE_RX_SAMPLER_OS_GAIN_OFFSET; + mask |= HPIPE_SMAPLER_MASK; + data |= 0x1 << HPIPE_SMAPLER_OFFSET; + reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask); + mask = HPIPE_SMAPLER_MASK; + data = 0x0 << HPIPE_SMAPLER_OFFSET; + reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask); + + /* Set External RX Regulator Control */ + mask = HPIPE_EXT_SELLV_RXSAMPL_MASK; + data = 0x1A << HPIPE_EXT_SELLV_RXSAMPL_OFFSET; + reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask); + debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n"); /* SERDES External Configuration */ mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK; @@ -1301,7 +1630,7 @@ static void comphy_utmi_power_down(u32 utmi_index, void __iomem *utmi_base_addr, * If UTMI connected to USB Device, configure mux prior to PHY init * (Device can be connected to UTMI0 or to UTMI1) */ - if (utmi_phy_port == UTMI_PHY_TO_USB_DEVICE0) { + if (utmi_phy_port == UTMI_PHY_TO_USB3_DEVICE0) { debug("stage: UTMI %d - Enable Device mode and configure UTMI mux\n", utmi_index); /* USB3 Device UTMI enable */ @@ -1493,7 +1822,8 @@ static void comphy_utmi_phy_init(u32 utmi_phy_count, continue; } printf("UTMI PHY %d initialized to ", i); - if (cp110_utmi_data[i].utmi_phy_port == UTMI_PHY_TO_USB_DEVICE0) + if (cp110_utmi_data[i].utmi_phy_port == + UTMI_PHY_TO_USB3_DEVICE0) printf("USB Device\n"); else printf("USB Host%d\n", @@ -1659,6 +1989,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, } switch (ptr_comphy_map->type) { case PHY_TYPE_UNCONNECTED: + case PHY_TYPE_IGNORE: continue; break; case PHY_TYPE_PEX0: @@ -1667,6 +1998,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, case PHY_TYPE_PEX3: ret = comphy_pcie_power_up( lane, pcie_width, ptr_comphy_map->clk_src, + serdes_map->end_point, hpipe_base_addr, comphy_base_addr); break; case PHY_TYPE_SATA0: @@ -1675,7 +2007,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, case PHY_TYPE_SATA3: ret = comphy_sata_power_up( lane, hpipe_base_addr, comphy_base_addr, - ptr_chip_cfg->comphy_index); + ptr_chip_cfg->cp_index); break; case PHY_TYPE_USB3_HOST0: case PHY_TYPE_USB3_HOST1: @@ -1696,9 +2028,10 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, lane, ptr_comphy_map->speed, hpipe_base_addr, comphy_base_addr); break; - case PHY_TYPE_KR: - ret = comphy_kr_power_up(lane, hpipe_base_addr, - comphy_base_addr); + case PHY_TYPE_SFI: + ret = comphy_sfi_power_up(lane, hpipe_base_addr, + comphy_base_addr, + ptr_comphy_map->speed); break; case PHY_TYPE_RXAUI0: case PHY_TYPE_RXAUI1: @@ -1712,7 +2045,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, } if (ret == 0) { /* - * If interface wans't initialiuzed, set the lane to + * If interface wans't initialized, set the lane to * PHY_TYPE_UNCONNECTED state. */ ptr_comphy_map->type = PHY_TYPE_UNCONNECTED; diff --git a/drivers/phy/marvell/comphy_hpipe.h b/drivers/phy/marvell/comphy_hpipe.h index 179e910..fbceb2a 100644 --- a/drivers/phy/marvell/comphy_hpipe.h +++ b/drivers/phy/marvell/comphy_hpipe.h @@ -49,6 +49,9 @@ #define SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET 4 #define SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK \ (0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET) +#define SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET 7 +#define SD_EXTERNAL_CONFIG2_SSC_ENABLE_MASK \ + (0x1 << SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET) #define SD_EXTERNAL_STATUS0_REG 0x18 #define SD_EXTERNAL_STATUS0_PLL_TX_OFFSET 2 @@ -105,9 +108,15 @@ #define HPIPE_G1_SET_0_G1_TX_AMP_OFFSET 1 #define HPIPE_G1_SET_0_G1_TX_AMP_MASK \ (0x1f << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET) +#define HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET 6 +#define HPIPE_G1_SET_0_G1_TX_AMP_ADJ_MASK \ + (0x1 << HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET) #define HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET 7 #define HPIPE_G1_SET_0_G1_TX_EMPH1_MASK \ (0xf << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET) +#define HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET 11 +#define HPIPE_G1_SET_0_G1_TX_EMPH1_EN_MASK \ + (0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET) #define HPIPE_G1_SET_1_REG 0x038 #define HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET 0 @@ -116,22 +125,96 @@ #define HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET 3 #define HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK \ (0x7 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET) +#define HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET 6 +#define HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK \ + (0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET) +#define HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET 8 +#define HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK \ + (0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET) #define HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET 10 #define HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK \ (0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET) -#define HPIPE_G2_SETTINGS_1_REG 0x040 - -#define HPIPE_G3_SETTINGS_1_REG 0x048 -#define HPIPE_G3_RX_SELMUPI_OFFSET 0 -#define HPIPE_G3_RX_SELMUPI_MASK \ - (0x7 << HPIPE_G3_RX_SELMUPI_OFFSET) -#define HPIPE_G3_RX_SELMUPF_OFFSET 3 -#define HPIPE_G3_RX_SELMUPF_MASK \ - (0x7 << HPIPE_G3_RX_SELMUPF_OFFSET) -#define HPIPE_G3_SETTING_BIT_OFFSET 13 -#define HPIPE_G3_SETTING_BIT_MASK \ - (0x1 << HPIPE_G3_SETTING_BIT_OFFSET) +#define HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET 11 +#define HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK \ + (0x3 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET) + +#define HPIPE_G2_SET_0_REG 0x3c +#define HPIPE_G2_SET_0_G2_TX_AMP_OFFSET 1 +#define HPIPE_G2_SET_0_G2_TX_AMP_MASK \ + (0x1f << HPIPE_G2_SET_0_G2_TX_AMP_OFFSET) +#define HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET 6 +#define HPIPE_G2_SET_0_G2_TX_AMP_ADJ_MASK \ + (0x1 << HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET) +#define HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET 7 +#define HPIPE_G2_SET_0_G2_TX_EMPH1_MASK \ + (0xf << HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET) +#define HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET 11 +#define HPIPE_G2_SET_0_G2_TX_EMPH1_EN_MASK \ + (0x1 << HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET) + +#define HPIPE_G2_SET_1_REG 0x040 +#define HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET 0 +#define HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK \ + (0x7 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET) +#define HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET 3 +#define HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK \ + (0x7 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET) +#define HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET 6 +#define HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK \ + (0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET) +#define HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET 8 +#define HPIPE_G2_SET_1_G2_RX_SELMUFF_MASK \ + (0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET) +#define HPIPE_G2_SET_1_G2_RX_DFE_EN_OFFSET 10 +#define HPIPE_G2_SET_1_G2_RX_DFE_EN_MASK \ + (0x1 << HPIPE_G2_SET_1_G2_RX_DFE_EN_OFFSET) +#define HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET 11 +#define HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_MASK \ + (0x3 << HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET) + +#define HPIPE_G3_SET_0_REG 0x44 +#define HPIPE_G3_SET_0_G3_TX_AMP_OFFSET 1 +#define HPIPE_G3_SET_0_G3_TX_AMP_MASK \ + (0x1f << HPIPE_G3_SET_0_G3_TX_AMP_OFFSET) +#define HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET 6 +#define HPIPE_G3_SET_0_G3_TX_AMP_ADJ_MASK \ + (0x1 << HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET) +#define HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET 7 +#define HPIPE_G3_SET_0_G3_TX_EMPH1_MASK \ + (0xf << HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET) +#define HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET 11 +#define HPIPE_G3_SET_0_G3_TX_EMPH1_EN_MASK \ + (0x1 << HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET) +#define HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET 12 +#define HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_MASK \ + (0x7 << HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET) +#define HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET 15 +#define HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_MASK \ + (0x1 << HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET) + +#define HPIPE_G3_SET_1_REG 0x048 +#define HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET 0 +#define HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK \ + (0x7 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET) +#define HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET 3 +#define HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK \ + (0x7 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET) +#define HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET 6 +#define HPIPE_G3_SET_1_G3_RX_SELMUFI_MASK \ + (0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET) +#define HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET 8 +#define HPIPE_G3_SET_1_G3_RX_SELMUFF_MASK \ + (0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET) +#define HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET 10 +#define HPIPE_G3_SET_1_G3_RX_DFE_EN_MASK \ + (0x1 << HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET) +#define HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET 11 +#define HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_MASK \ + (0x3 << HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET) +#define HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET 13 +#define HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK \ + (0x1 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET) #define HPIPE_LOOPBACK_REG 0x08c #define HPIPE_LOOPBACK_SEL_OFFSET 1 @@ -144,6 +227,9 @@ #define HPIPE_INTERFACE_GEN_MAX_OFFSET 10 #define HPIPE_INTERFACE_GEN_MAX_MASK \ (0x3 << HPIPE_INTERFACE_GEN_MAX_OFFSET) +#define HPIPE_INTERFACE_DET_BYPASS_OFFSET 12 +#define HPIPE_INTERFACE_DET_BYPASS_MASK \ + (0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET) #define HPIPE_INTERFACE_LINK_TRAIN_OFFSET 14 #define HPIPE_INTERFACE_LINK_TRAIN_MASK \ (0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET) @@ -166,6 +252,16 @@ #define HPIPE_VTHIMPCAL_CTRL_REG 0x104 +#define HPIPE_VDD_CAL_CTRL_REG 0x114 +#define HPIPE_EXT_SELLV_RXSAMPL_OFFSET 5 +#define HPIPE_EXT_SELLV_RXSAMPL_MASK \ + (0x1f << HPIPE_EXT_SELLV_RXSAMPL_OFFSET) + +#define HPIPE_VDD_CAL_0_REG 0x108 +#define HPIPE_CAL_VDD_CONT_MODE_OFFSET 15 +#define HPIPE_CAL_VDD_CONT_MODE_MASK \ + (0x1 << HPIPE_CAL_VDD_CONT_MODE_OFFSET) + #define HPIPE_PCIE_REG0 0x120 #define HPIPE_PCIE_IDLE_SYNC_OFFSET 12 #define HPIPE_PCIE_IDLE_SYNC_MASK \ @@ -212,9 +308,29 @@ #define HPIPE_PWR_CTR_SFT_RST_MASK \ (0x1 << HPIPE_PWR_CTR_SFT_RST_OFFSET) +#define HPIPE_SPD_DIV_FORCE_REG 0x154 +#define HPIPE_TXDIGCK_DIV_FORCE_OFFSET 7 +#define HPIPE_TXDIGCK_DIV_FORCE_MASK \ + (0x1 << HPIPE_TXDIGCK_DIV_FORCE_OFFSET) +#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET 8 +#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_MASK \ + (0x3 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET) +#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET 10 +#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_MASK \ + (0x1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET) +#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET 13 +#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_MASK \ + (0x3 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET) +#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET 15 +#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK \ + (0x1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET) + #define HPIPE_PLLINTP_REG1 0x150 #define HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG 0x16C +#define HPIPE_RX_SAMPLER_OS_GAIN_OFFSET 6 +#define HPIPE_RX_SAMPLER_OS_GAIN_MASK \ + (0x3 << HPIPE_RX_SAMPLER_OS_GAIN_OFFSET) #define HPIPE_SMAPLER_OFFSET 12 #define HPIPE_SMAPLER_MASK \ (0x1 << HPIPE_SMAPLER_OFFSET) @@ -227,12 +343,54 @@ #define HPIPE_TX_REG1_SLC_EN_MASK \ (0x3f << HPIPE_TX_REG1_SLC_EN_OFFSET) -#define HPIPE_PWR_CTR_DTL_REG 0x184 -#define HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET 2 -#define HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK \ +#define HPIPE_PWR_CTR_DTL_REG 0x184 +#define HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET 0 +#define HPIPE_PWR_CTR_DTL_SQ_DET_EN_MASK \ + (0x1 << HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET) +#define HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET 1 +#define HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_MASK \ + (0x1 << HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET) +#define HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET 2 +#define HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK \ (0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET) - -#define HPIPE_RX_REG3 0x188 +#define HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET 4 +#define HPIPE_PWR_CTR_DTL_CLAMPING_SEL_MASK \ + (0x7 << HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET) +#define HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET 10 +#define HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_MASK \ + (0x1 << HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET) +#define HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET 12 +#define HPIPE_PWR_CTR_DTL_CLK_MODE_MASK \ + (0x3 << HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET) +#define HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET 14 +#define HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_MASK \ + (1 << HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET) + +#define HPIPE_PHASE_CONTROL_REG 0x188 +#define HPIPE_OS_PH_OFFSET_OFFSET 0 +#define HPIPE_OS_PH_OFFSET_MASK \ + (0x7f << HPIPE_OS_PH_OFFSET_OFFSET) +#define HPIPE_OS_PH_OFFSET_FORCE_OFFSET 7 +#define HPIPE_OS_PH_OFFSET_FORCE_MASK \ + (0x1 << HPIPE_OS_PH_OFFSET_FORCE_OFFSET) +#define HPIPE_OS_PH_VALID_OFFSET 8 +#define HPIPE_OS_PH_VALID_MASK \ + (0x1 << HPIPE_OS_PH_VALID_OFFSET) + +#define HPIPE_FRAME_DETECT_CTRL_0_REG 0x214 +#define HPIPE_TRAIN_PAT_NUM_OFFSET 0x7 +#define HPIPE_TRAIN_PAT_NUM_MASK \ + (0x1FF << HPIPE_TRAIN_PAT_NUM_OFFSET) + +#define HPIPE_FRAME_DETECT_CTRL_3_REG 0x220 +#define HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET 12 +#define HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK \ + (0x1 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET) + +#define HPIPE_DME_REG 0x228 +#define HPIPE_DME_ETHERNET_MODE_OFFSET 7 +#define HPIPE_DME_ETHERNET_MODE_MASK \ + (0x1 << HPIPE_DME_ETHERNET_MODE_OFFSET) #define HPIPE_TX_TRAIN_CTRL_0_REG 0x268 #define HPIPE_TX_TRAIN_P2P_HOLD_OFFSET 15 @@ -259,6 +417,9 @@ #define HPIPE_PCIE_REG3 0x290 #define HPIPE_TX_TRAIN_CTRL_5_REG 0x2A4 +#define HPIPE_RX_TRAIN_TIMER_OFFSET 0 +#define HPIPE_RX_TRAIN_TIMER_MASK \ + (0x3ff << HPIPE_RX_TRAIN_TIMER_OFFSET) #define HPIPE_TX_TRAIN_START_SQ_EN_OFFSET 11 #define HPIPE_TX_TRAIN_START_SQ_EN_MASK \ (0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET) @@ -279,6 +440,23 @@ #define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET 7 #define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK \ (0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET) +#define HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET 8 +#define HPIPE_TX_TRAIN_16BIT_AUTO_EN_MASK \ + (0x1 << HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET) +#define HPIPE_TX_TRAIN_PAT_SEL_OFFSET 9 +#define HPIPE_TX_TRAIN_PAT_SEL_MASK \ + (0x1 << HPIPE_TX_TRAIN_PAT_SEL_OFFSET) + +#define HPIPE_CDR_CONTROL_REG 0x418 +#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET 12 +#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK \ + (0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET) +#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET 9 +#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK \ + (0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET) +#define HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET 6 +#define HPIPE_CDR_MAX_DFE_ADAPT_1_MASK \ + (0x7 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET) #define HPIPE_TX_TRAIN_CTRL_11_REG 0x438 #define HPIPE_TX_STATUS_CHECK_MODE_OFFSET 6 @@ -291,10 +469,25 @@ #define HPIPE_TX_SWEEP_PRESET_EN_MASK \ (0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET) -#define HPIPE_G1_SETTINGS_3_REG 0x440 -#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET 9 -#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK \ +#define HPIPE_G1_SETTINGS_3_REG 0x440 +#define HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET 0 +#define HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK \ + (0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET) +#define HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET 4 +#define HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK \ + (0x7 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET) +#define HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET 7 +#define HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK \ + (0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET) +#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET 9 +#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK \ (0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET) +#define HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET 12 +#define HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_MASK \ + (0x3 << HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET) +#define HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET 14 +#define HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_MASK \ + (0x3 << HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET) #define HPIPE_G1_SETTINGS_4_REG 0x444 #define HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET 8 @@ -302,9 +495,22 @@ (0x3 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET) #define HPIPE_G2_SETTINGS_3_REG 0x448 -#define HPIPE_G2_SETTINGS_4_REG 0x44C + +#define HPIPE_G2_SETTINGS_4_REG 0x44c +#define HPIPE_G2_DFE_RES_OFFSET 8 +#define HPIPE_G2_DFE_RES_MASK \ + (0x3 << HPIPE_G2_DFE_RES_OFFSET) #define HPIPE_G3_SETTING_3_REG 0x450 +#define HPIPE_G3_FFE_CAP_SEL_OFFSET 0 +#define HPIPE_G3_FFE_CAP_SEL_MASK \ + (0xf << HPIPE_G3_FFE_CAP_SEL_OFFSET) +#define HPIPE_G3_FFE_RES_SEL_OFFSET 4 +#define HPIPE_G3_FFE_RES_SEL_MASK \ + (0x7 << HPIPE_G3_FFE_RES_SEL_OFFSET) +#define HPIPE_G3_FFE_SETTING_FORCE_OFFSET 7 +#define HPIPE_G3_FFE_SETTING_FORCE_MASK \ + (0x1 << HPIPE_G3_FFE_SETTING_FORCE_OFFSET) #define HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET 12 #define HPIPE_G3_FFE_DEG_RES_LEVEL_MASK \ (0x3 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET) @@ -317,6 +523,16 @@ #define HPIPE_G3_DFE_RES_MASK \ (0x3 << HPIPE_G3_DFE_RES_OFFSET) +#define HPIPE_TX_PRESET_INDEX_REG 0x468 +#define HPIPE_TX_PRESET_INDEX_OFFSET 0 +#define HPIPE_TX_PRESET_INDEX_MASK \ + (0xf << HPIPE_TX_PRESET_INDEX_OFFSET) + +#define HPIPE_DFE_CONTROL_REG 0x470 +#define HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET 14 +#define HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK \ + (0x3 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET) + #define HPIPE_DFE_CTRL_28_REG 0x49C #define HPIPE_DFE_CTRL_28_PIPE4_OFFSET 7 #define HPIPE_DFE_CTRL_28_PIPE4_MASK \ @@ -327,6 +543,11 @@ #define HPIPE_G1_SETTING_5_G1_ICP_MASK \ (0xf << HPIPE_G1_SETTING_5_G1_ICP_OFFSET) +#define HPIPE_G3_SETTING_5_REG 0x548 +#define HPIPE_G3_SETTING_5_G3_ICP_OFFSET 0 +#define HPIPE_G3_SETTING_5_G3_ICP_MASK \ + (0xf << HPIPE_G3_SETTING_5_G3_ICP_OFFSET) + #define HPIPE_LANE_CONFIG0_REG 0x600 #define HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET 0 #define HPIPE_LANE_CONFIG0_TXDEEMPH0_MASK \ @@ -349,6 +570,9 @@ #define HPIPE_LANE_CFG4_DFE_CTRL_OFFSET 0 #define HPIPE_LANE_CFG4_DFE_CTRL_MASK \ (0x7 << HPIPE_LANE_CFG4_DFE_CTRL_OFFSET) +#define HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET 3 +#define HPIPE_LANE_CFG4_DFE_EN_SEL_MASK \ + (0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET) #define HPIPE_LANE_CFG4_DFE_OVER_OFFSET 6 #define HPIPE_LANE_CFG4_DFE_OVER_MASK \ (0x1 << HPIPE_LANE_CFG4_DFE_OVER_OFFSET) @@ -366,6 +590,17 @@ #define HPIPE_CFG_UPDATE_POLARITY_MASK \ (0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET) +#define HPIPE_LANE_EQ_REMOTE_SETTING_REG 0x6f8 +#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET 0 +#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK \ + (0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET) +#define HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET 1 +#define HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK \ + (0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET) +#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET 2 +#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK \ + (0xf << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET) + #define HPIPE_RST_CLK_CTRL_REG 0x704 #define HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET 0 #define HPIPE_RST_CLK_CTRL_PIPE_RST_MASK \ diff --git a/drivers/phy/marvell/comphy_mux.c b/drivers/phy/marvell/comphy_mux.c index 1dc7426..b036fb1 100644 --- a/drivers/phy/marvell/comphy_mux.c +++ b/drivers/phy/marvell/comphy_mux.c @@ -27,6 +27,10 @@ static void comphy_mux_check_config(struct comphy_mux_data *mux_data, for (lane = 0; lane < comphy_max_lanes; lane++, comphy_map_data++, mux_data++) { + /* Don't check ignored COMPHYs */ + if (comphy_map_data->type == PHY_TYPE_IGNORE) + continue; + mux_opt = mux_data->mux_values; for (opt = 0, valid = 0; opt < mux_data->max_lane_values; opt++, mux_opt++) { @@ -83,6 +87,9 @@ static void comphy_mux_reg_write(struct comphy_mux_data *mux_data, for (lane = 0; lane < comphy_max_lanes; lane++, comphy_map_data++, mux_data++) { + if (comphy_map_data->type == PHY_TYPE_IGNORE) + continue; + offset = lane * bitcount; mask = (((1 << bitcount) - 1) << offset); value = (comphy_mux_get_mux_value(mux_data, |