diff options
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/Makefile | 2 | ||||
| -rw-r--r-- | drivers/power/palmas.c (renamed from drivers/power/twl6035.c) | 34 | ||||
| -rw-r--r-- | drivers/power/twl4030.c | 16 | ||||
| -rw-r--r-- | drivers/power/twl6030.c | 75 |
4 files changed, 47 insertions, 80 deletions
diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 1dac16a..a9c4237 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -30,7 +30,7 @@ COBJS-$(CONFIG_FTPMU010_POWER) += ftpmu010.o COBJS-$(CONFIG_TPS6586X_POWER) += tps6586x.o COBJS-$(CONFIG_TWL4030_POWER) += twl4030.o COBJS-$(CONFIG_TWL6030_POWER) += twl6030.o -COBJS-$(CONFIG_TWL6035_POWER) += twl6035.o +COBJS-$(CONFIG_PALMAS_POWER) += palmas.o COBJS-$(CONFIG_POWER) += power_core.o COBJS-$(CONFIG_DIALOG_POWER) += power_dialog.o diff --git a/drivers/power/twl6035.c b/drivers/power/palmas.c index d3de698..09c832d 100644 --- a/drivers/power/twl6035.c +++ b/drivers/power/palmas.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2012 + * (C) Copyright 2012-2013 * Texas Instruments, <www.ti.com> * * See file CREDITS for list of people who contributed to this @@ -21,43 +21,21 @@ * MA 02111-1307 USA */ #include <config.h> -#include <twl6035.h> +#include <palmas.h> -/* Functions to read and write from TWL6030 */ -int twl6035_i2c_write_u8(u8 chip_no, u8 val, u8 reg) -{ - return i2c_write(chip_no, reg, 1, &val, 1); -} - -int twl6035_i2c_read_u8(u8 chip_no, u8 *val, u8 reg) -{ - return i2c_read(chip_no, reg, 1, val, 1); -} - -/* To align with i2c mw/mr address, reg, val command syntax */ -static inline int palmas_write_u8(u8 chip_no, u8 reg, u8 val) -{ - return i2c_write(chip_no, reg, 1, &val, 1); -} - -static inline int palmas_read_u8(u8 chip_no, u8 reg, u8 *val) -{ - return i2c_read(chip_no, reg, 1, val, 1); -} - -void twl6035_init_settings(void) +void palmas_init_settings(void) { return; } -int twl6035_mmc1_poweron_ldo(void) +int palmas_mmc1_poweron_ldo(void) { u8 val = 0; /* set LDO9 TWL6035 to 3V */ val = 0x2b; /* (3 -.9)*28 +1 */ - if (palmas_write_u8(0x48, LDO9_VOLTAGE, val)) { + if (palmas_i2c_write_u8(0x48, LDO9_VOLTAGE, val)) { printf("twl6035: could not set LDO9 voltage.\n"); return 1; } @@ -65,7 +43,7 @@ int twl6035_mmc1_poweron_ldo(void) /* TURN ON LDO9 */ val = LDO_ON | LDO_MODE_SLEEP | LDO_MODE_ACTIVE; - if (palmas_write_u8(0x48, LDO9_CTRL, val)) { + if (palmas_i2c_write_u8(0x48, LDO9_CTRL, val)) { printf("twl6035: could not turn on LDO9.\n"); return 1; } diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c index e7d5f13..6610f78 100644 --- a/drivers/power/twl4030.c +++ b/drivers/power/twl4030.c @@ -45,14 +45,14 @@ void twl4030_power_reset_init(void) { u8 val = 0; - if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &val, - TWL4030_PM_MASTER_P1_SW_EVENTS)) { + if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, + TWL4030_PM_MASTER_P1_SW_EVENTS, &val)) { printf("Error:TWL4030: failed to read the power register\n"); printf("Could not initialize hardware reset\n"); } else { val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON; - if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, val, - TWL4030_PM_MASTER_P1_SW_EVENTS)) { + if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, + TWL4030_PM_MASTER_P1_SW_EVENTS, val)) { printf("Error:TWL4030: failed to write the power register\n"); printf("Could not initialize hardware reset\n"); } @@ -68,8 +68,8 @@ void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, int ret; /* Select the Voltage */ - ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_val, - vsel_reg); + ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_reg, + vsel_val); if (ret != 0) { printf("Could not write vsel to reg %02x (%d)\n", vsel_reg, ret); @@ -77,8 +77,8 @@ void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, } /* Select the Device Group (enable the supply if dev_grp_sel != 0) */ - ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp_sel, - dev_grp); + ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp, + dev_grp_sel); if (ret != 0) printf("Could not write grp_sel to reg %02x (%d)\n", dev_grp, ret); diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c index c5a0038..d421e60 100644 --- a/drivers/power/twl6030.c +++ b/drivers/power/twl6030.c @@ -25,30 +25,19 @@ #include <twl6030.h> -/* Functions to read and write from TWL6030 */ -static inline int twl6030_i2c_write_u8(u8 chip_no, u8 val, u8 reg) -{ - return i2c_write(chip_no, reg, 1, &val, 1); -} - -static inline int twl6030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg) -{ - return i2c_read(chip_no, reg, 1, val, 1); -} - static int twl6030_gpadc_read_channel(u8 channel_no) { u8 lsb = 0; u8 msb = 0; int ret = 0; - ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &lsb, - GPCH0_LSB + channel_no * 2); + ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, + GPCH0_LSB + channel_no * 2, &lsb); if (ret) return ret; - ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &msb, - GPCH0_MSB + channel_no * 2); + ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, + GPCH0_MSB + channel_no * 2, &msb); if (ret) return ret; @@ -60,7 +49,7 @@ static int twl6030_gpadc_sw2_trigger(void) u8 val; int ret = 0; - ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2_SP2, CTRL_P2); + ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2, CTRL_P2_SP2); if (ret) return ret; @@ -68,7 +57,7 @@ static int twl6030_gpadc_sw2_trigger(void) val = CTRL_P2_BUSY; while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) { - ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &val, CTRL_P2); + ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, CTRL_P2, &val); if (ret) return ret; udelay(1000); @@ -79,29 +68,29 @@ static int twl6030_gpadc_sw2_trigger(void) void twl6030_stop_usb_charging(void) { - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, 0, CONTROLLER_CTRL1); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1, 0); return; } void twl6030_start_usb_charging(void) { - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VICHRG_1500, - CHARGERUSB_VICHRG); - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CIN_LIMIT_NONE, - CHARGERUSB_CINLIMIT); - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MBAT_TEMP, - CONTROLLER_INT_MASK); - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MASK_MCHARGERUSB_THMREG, - CHARGERUSB_INT_MASK); - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VOREG_4P0, - CHARGERUSB_VOREG); - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL2_VITERM_400, - CHARGERUSB_CTRL2); - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TERM, CHARGERUSB_CTRL1); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CHARGERUSB_VICHRG, CHARGERUSB_VICHRG_1500); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CHARGERUSB_CINLIMIT, CHARGERUSB_CIN_LIMIT_NONE); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CONTROLLER_INT_MASK, MBAT_TEMP); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CHARGERUSB_INT_MASK, MASK_MCHARGERUSB_THMREG); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CHARGERUSB_VOREG, CHARGERUSB_VOREG_4P0); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CHARGERUSB_CTRL2, CHARGERUSB_CTRL2_VITERM_400); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL1, TERM); /* Enable USB charging */ - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1_EN_CHARGER, - CONTROLLER_CTRL1); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CONTROLLER_CTRL1, CONTROLLER_CTRL1_EN_CHARGER); return; } @@ -111,8 +100,8 @@ int twl6030_get_battery_current(void) u8 msb = 0; u8 lsb = 0; - twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &msb, FG_REG_11); - twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &lsb, FG_REG_10); + twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_11, &msb); + twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_10, &lsb); battery_current = ((msb << 8) | lsb); /* convert 10 bit signed number to 16 bit signed number */ @@ -156,10 +145,10 @@ void twl6030_init_battery_charging(void) int ret = 0; /* Enable VBAT measurement */ - twl6030_i2c_write_u8(TWL6030_CHIP_PM, VBAT_MEAS, MISC1); + twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS); /* Enable GPADC module */ - ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, FGS | GPADCS, TOGGLE1); + ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS); if (ret) { printf("Failed to enable GPADC\n"); return; @@ -173,7 +162,7 @@ void twl6030_init_battery_charging(void) printf("Main battery voltage too low!\n"); /* Check for the presence of USB charger */ - twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &stat1, CONTROLLER_STAT1); + twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &stat1); /* check for battery presence indirectly via Fuel gauge */ if ((stat1 & VBUS_DET) && (battery_volt < 3300)) @@ -185,8 +174,8 @@ void twl6030_init_battery_charging(void) void twl6030_power_mmc_init() { /* set voltage to 3.0 and turnon for APP */ - twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x15, VMMC_CFG_VOLTATE); - twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VMMC_CFG_STATE); + twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_VOLTATE, 0x15); + twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_STATE, 0x21); } void twl6030_usb_device_settings() @@ -194,12 +183,12 @@ void twl6030_usb_device_settings() u8 data = 0; /* Select APP Group and set state to ON */ - twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VUSB_CFG_STATE); + twl6030_i2c_write_u8(TWL6030_CHIP_PM, VUSB_CFG_STATE, 0x21); - twl6030_i2c_read_u8(TWL6030_CHIP_PM, &data, MISC2); + twl6030_i2c_read_u8(TWL6030_CHIP_PM, MISC2, &data); data |= 0x10; /* Select the input supply for VBUS regulator */ - twl6030_i2c_write_u8(TWL6030_CHIP_PM, data, MISC2); + twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC2, data); } #endif |