summaryrefslogtreecommitdiff
path: root/drivers/serial/serial_lh7a40x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/serial_lh7a40x.c')
-rw-r--r--drivers/serial/serial_lh7a40x.c204
1 files changed, 0 insertions, 204 deletions
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
deleted file mode 100644
index 6c96285..0000000
--- a/drivers/serial/serial_lh7a40x.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <lh7a40x.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CONSOLE_UART1)
-# define UART_CONSOLE 1
-#elif defined(CONFIG_CONSOLE_UART2)
-# define UART_CONSOLE 2
-#elif defined(CONFIG_CONSOLE_UART3)
-# define UART_CONSOLE 3
-#else
-# error "No console configured ... "
-#endif
-
-static void lh7a40x_serial_setbrg(void)
-{
- lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
- int i;
- unsigned int reg = 0;
-
- /*
- * userguide 15.1.2.4
- *
- * BAUDDIV is (UART_REF_FREQ/(16 X BAUD))-1
- *
- * UART_REF_FREQ = external system clock input / 2 (Hz)
- * BAUD is desired baudrate (bits/s)
- *
- * NOTE: we add (divisor/2) to numerator to round for
- * more precision
- */
- reg = (((get_PLLCLK()/2) + ((16*gd->baudrate)/2)) / (16 * gd->baudrate)) - 1;
- uart->brcon = reg;
-
- for (i = 0; i < 100; i++);
-}
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-static int lh7a40x_serial_init(void)
-{
- lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-
- /* UART must be enabled before writing to any config registers */
- uart->con |= (UART_EN);
-
-#ifdef CONFIG_CONSOLE_UART1
- /* infrared disabled */
- uart->con |= UART_SIRD;
-#endif
- /* loopback disabled */
- uart->con &= ~(UART_LBE);
-
- /* modem lines and tx/rx polarities */
- uart->con &= ~(UART_MXP | UART_TXP | UART_RXP);
-
- /* FIFO enable, N81 */
- uart->fcon = (UART_WLEN_8 | UART_FEN | UART_STP2_1);
-
- /* set baudrate */
- serial_setbrg ();
-
- /* enable rx interrupt */
- uart->inten |= UART_RI;
-
- return (0);
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int lh7a40x_serial_getc(void)
-{
- lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-
- /* wait for character to arrive */
- while (uart->status & UART_RXFE);
-
- return(uart->data & 0xff);
-}
-
-#ifdef CONFIG_HWFLOW
-static int hwflow = 0; /* turned off by default */
-int hwflow_onoff(int on)
-{
- switch(on) {
- case 0:
- default:
- break; /* return current */
- case 1:
- hwflow = 1; /* turn on */
- break;
- case -1:
- hwflow = 0; /* turn off */
- break;
- }
- return hwflow;
-}
-#endif
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int be_quiet = 0;
-void disable_putc(void)
-{
- be_quiet = 1;
-}
-
-void enable_putc(void)
-{
- be_quiet = 0;
-}
-#endif
-
-
-/*
- * Output a single byte to the serial port.
- */
-static void lh7a40x_serial_putc(const char c)
-{
- lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-
-#ifdef CONFIG_MODEM_SUPPORT
- if (be_quiet)
- return;
-#endif
-
- /* wait for room in the tx FIFO */
- while (!(uart->status & UART_TXFE));
-
-#ifdef CONFIG_HWFLOW
- /* Wait for CTS up */
- while(hwflow && !(uart->status & UART_CTS));
-#endif
-
- uart->data = c;
-
- /* If \n, also do \r */
- if (c == '\n')
- serial_putc ('\r');
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-static int lh7a40x_serial_tstc(void)
-{
- lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-
- return(!(uart->status & UART_RXFE));
-}
-
-static void lh7a40x_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-static struct serial_device lh7a40x_serial_drv = {
- .name = "lh7a40x_serial",
- .start = lh7a40x_serial_init,
- .stop = NULL,
- .setbrg = lh7a40x_serial_setbrg,
- .putc = lh7a40x_serial_putc,
- .puts = lh7a40x_serial_puts,
- .getc = lh7a40x_serial_getc,
- .tstc = lh7a40x_serial_tstc,
-};
-
-void lh7a40x_serial_initialize(void)
-{
- serial_register(&lh7a40x_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &lh7a40x_serial_drv;
-}