summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/omap1510_udc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/omap1510_udc.c')
-rw-r--r--drivers/usb/gadget/omap1510_udc.c1567
1 files changed, 1567 insertions, 0 deletions
diff --git a/drivers/usb/gadget/omap1510_udc.c b/drivers/usb/gadget/omap1510_udc.c
new file mode 100644
index 0000000..90f7907
--- /dev/null
+++ b/drivers/usb/gadget/omap1510_udc.c
@@ -0,0 +1,1567 @@
+/*
+ * (C) Copyright 2003
+ * Gerry Hamel, geh@ti.com, Texas Instruments
+ *
+ * Based on
+ * linux/drivers/usb/device/bi/omap.c
+ * TI OMAP1510 USB bus interface driver
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ * (C) Copyright 2002
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#ifdef CONFIG_OMAP_SX1
+#include <i2c.h>
+#endif
+#include <usbdevice.h>
+#include <usb/omap1510_udc.h>
+
+#include "ep0.h"
+
+
+#define UDC_INIT_MDELAY 80 /* Device settle delay */
+#define UDC_MAX_ENDPOINTS 31 /* Number of endpoints on this UDC */
+
+/* Some kind of debugging output... */
+#if 1
+#define UDCDBG(str)
+#define UDCDBGA(fmt,args...)
+#else /* The bugs still exists... */
+#define UDCDBG(str) serial_printf("[%s] %s:%d: " str "\n", __FILE__,__FUNCTION__,__LINE__)
+#define UDCDBGA(fmt,args...) serial_printf("[%s] %s:%d: " fmt "\n", __FILE__,__FUNCTION__,__LINE__, ##args)
+#endif
+
+#if 1
+#define UDCREG(name)
+#define UDCREGL(name)
+#else /* The bugs still exists... */
+#define UDCREG(name) serial_printf("%s():%d: %s[%08x]=%.4x\n",__FUNCTION__,__LINE__, (#name), name, inw(name)) /* For 16-bit regs */
+#define UDCREGL(name) serial_printf("%s():%d: %s[%08x]=%.8x\n",__FUNCTION__,__LINE__, (#name), name, inl(name)) /* For 32-bit regs */
+#endif
+
+
+static struct urb *ep0_urb = NULL;
+
+static struct usb_device_instance *udc_device; /* Used in interrupt handler */
+static u16 udc_devstat = 0; /* UDC status (DEVSTAT) */
+static u32 udc_interrupts = 0;
+
+static void udc_stall_ep (unsigned int ep_addr);
+
+
+static struct usb_endpoint_instance *omap1510_find_ep (int ep)
+{
+ int i;
+
+ for (i = 0; i < udc_device->bus->max_endpoints; i++) {
+ if (udc_device->bus->endpoint_array[i].endpoint_address == ep)
+ return &udc_device->bus->endpoint_array[i];
+ }
+ return NULL;
+}
+
+/* ************************************************************************** */
+/* IO
+ */
+
+/*
+ * omap1510_prepare_endpoint_for_rx
+ *
+ * This function implements TRM Figure 14-11.
+ *
+ * The endpoint to prepare for transfer is specified as a physical endpoint
+ * number. For OUT (rx) endpoints 1 through 15, the corresponding endpoint
+ * configuration register is checked to see if the endpoint is ISO or not.
+ * If the OUT endpoint is valid and is non-ISO then its FIFO is enabled.
+ * No action is taken for endpoint 0 or for IN (tx) endpoints 16 through 30.
+ */
+static void omap1510_prepare_endpoint_for_rx (int ep_addr)
+{
+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+
+ UDCDBGA ("omap1510_prepare_endpoint %x", ep_addr);
+ if (((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) {
+ if ((inw (UDC_EP_RX (ep_num)) &
+ (UDC_EPn_RX_Valid | UDC_EPn_RX_Iso)) ==
+ UDC_EPn_RX_Valid) {
+ /* rx endpoint is valid, non-ISO, so enable its FIFO */
+ outw (UDC_EP_Sel | ep_num, UDC_EP_NUM);
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ outw (0, UDC_EP_NUM);
+ }
+ }
+}
+
+/* omap1510_configure_endpoints
+ *
+ * This function implements TRM Figure 14-10.
+ */
+static void omap1510_configure_endpoints (struct usb_device_instance *device)
+{
+ int ep;
+ struct usb_bus_instance *bus;
+ struct usb_endpoint_instance *endpoint;
+ unsigned short ep_ptr;
+ unsigned short ep_size;
+ unsigned short ep_isoc;
+ unsigned short ep_doublebuffer;
+ int ep_addr;
+ int packet_size;
+ int buffer_size;
+ int attributes;
+
+ bus = device->bus;
+
+ /* There is a dedicated 2048 byte buffer for USB packets that may be
+ * arbitrarily partitioned among the endpoints on 8-byte boundaries.
+ * The first 8 bytes are reserved for receiving setup packets on
+ * endpoint 0.
+ */
+ ep_ptr = 8; /* reserve the first 8 bytes for the setup fifo */
+
+ for (ep = 0; ep < bus->max_endpoints; ep++) {
+ endpoint = bus->endpoint_array + ep;
+ ep_addr = endpoint->endpoint_address;
+ if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+ /* IN endpoint */
+ packet_size = endpoint->tx_packetSize;
+ attributes = endpoint->tx_attributes;
+ } else {
+ /* OUT endpoint */
+ packet_size = endpoint->rcv_packetSize;
+ attributes = endpoint->rcv_attributes;
+ }
+
+ switch (packet_size) {
+ case 0:
+ ep_size = 0;
+ break;
+ case 8:
+ ep_size = 0;
+ break;
+ case 16:
+ ep_size = 1;
+ break;
+ case 32:
+ ep_size = 2;
+ break;
+ case 64:
+ ep_size = 3;
+ break;
+ case 128:
+ ep_size = 4;
+ break;
+ case 256:
+ ep_size = 5;
+ break;
+ case 512:
+ ep_size = 6;
+ break;
+ default:
+ UDCDBGA ("ep 0x%02x has bad packet size %d",
+ ep_addr, packet_size);
+ packet_size = 0;
+ ep_size = 0;
+ break;
+ }
+
+ switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ case USB_ENDPOINT_XFER_BULK:
+ case USB_ENDPOINT_XFER_INT:
+ default:
+ /* A non-isochronous endpoint may optionally be
+ * double-buffered. For now we disable
+ * double-buffering.
+ */
+ ep_doublebuffer = 0;
+ ep_isoc = 0;
+ if (packet_size > 64)
+ packet_size = 0;
+ if (!ep || !ep_doublebuffer)
+ buffer_size = packet_size;
+ else
+ buffer_size = packet_size * 2;
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ /* Isochronous endpoints are always double-
+ * buffered, but the double-buffering bit
+ * in the endpoint configuration register
+ * becomes the msb of the endpoint size so we
+ * set the double-buffering flag to zero.
+ */
+ ep_doublebuffer = 0;
+ ep_isoc = 1;
+ buffer_size = packet_size * 2;
+ break;
+ }
+
+ /* check to see if our packet buffer RAM is exhausted */
+ if ((ep_ptr + buffer_size) > 2048) {
+ UDCDBGA ("out of packet RAM for ep 0x%02x buf size %d", ep_addr, buffer_size);
+ buffer_size = packet_size = 0;
+ }
+
+ /* force a default configuration for endpoint 0 since it is
+ * always enabled
+ */
+ if (!ep && ((packet_size < 8) || (packet_size > 64))) {
+ buffer_size = packet_size = 64;
+ ep_size = 3;
+ }
+
+ if (!ep) {
+ /* configure endpoint 0 */
+ outw ((ep_size << 12) | (ep_ptr >> 3), UDC_EP0);
+ /*UDCDBGA("ep 0 buffer offset 0x%03x packet size 0x%03x", */
+ /* ep_ptr, packet_size); */
+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+ /* IN endpoint */
+ if (packet_size) {
+ outw ((1 << 15) | (ep_doublebuffer << 14) |
+ (ep_size << 12) | (ep_isoc << 11) |
+ (ep_ptr >> 3),
+ UDC_EP_TX (ep_addr &
+ USB_ENDPOINT_NUMBER_MASK));
+ UDCDBGA ("IN ep %d buffer offset 0x%03x"
+ " packet size 0x%03x",
+ ep_addr & USB_ENDPOINT_NUMBER_MASK,
+ ep_ptr, packet_size);
+ } else {
+ outw (0,
+ UDC_EP_TX (ep_addr &
+ USB_ENDPOINT_NUMBER_MASK));
+ }
+ } else {
+ /* OUT endpoint */
+ if (packet_size) {
+ outw ((1 << 15) | (ep_doublebuffer << 14) |
+ (ep_size << 12) | (ep_isoc << 11) |
+ (ep_ptr >> 3),
+ UDC_EP_RX (ep_addr &
+ USB_ENDPOINT_NUMBER_MASK));
+ UDCDBGA ("OUT ep %d buffer offset 0x%03x"
+ " packet size 0x%03x",
+ ep_addr & USB_ENDPOINT_NUMBER_MASK,
+ ep_ptr, packet_size);
+ } else {
+ outw (0,
+ UDC_EP_RX (ep_addr &
+ USB_ENDPOINT_NUMBER_MASK));
+ }
+ }
+ ep_ptr += buffer_size;
+ }
+}
+
+/* omap1510_deconfigure_device
+ *
+ * This function balances omap1510_configure_device.
+ */
+static void omap1510_deconfigure_device (void)
+{
+ int epnum;
+
+ UDCDBG ("clear Cfg_Lock");
+ outw (inw (UDC_SYSCON1) & ~UDC_Cfg_Lock, UDC_SYSCON1);
+ UDCREG (UDC_SYSCON1);
+
+ /* deconfigure all endpoints */
+ for (epnum = 1; epnum <= 15; epnum++) {
+ outw (0, UDC_EP_RX (epnum));
+ outw (0, UDC_EP_TX (epnum));
+ }
+}
+
+/* omap1510_configure_device
+ *
+ * This function implements TRM Figure 14-9.
+ */
+static void omap1510_configure_device (struct usb_device_instance *device)
+{
+ omap1510_configure_endpoints (device);
+
+
+ /* Figure 14-9 indicates we should enable interrupts here, but we have
+ * other routines (udc_all_interrupts, udc_suspended_interrupts) to
+ * do that.
+ */
+
+ UDCDBG ("set Cfg_Lock");
+ outw (inw (UDC_SYSCON1) | UDC_Cfg_Lock, UDC_SYSCON1);
+ UDCREG (UDC_SYSCON1);
+}
+
+/* omap1510_write_noniso_tx_fifo
+ *
+ * This function implements TRM Figure 14-30.
+ *
+ * If the endpoint has an active tx_urb, then the next packet of data from the
+ * URB is written to the tx FIFO. The total amount of data in the urb is given
+ * by urb->actual_length. The maximum amount of data that can be sent in any
+ * one packet is given by endpoint->tx_packetSize. The number of data bytes
+ * from this URB that have already been transmitted is given by endpoint->sent.
+ * endpoint->last is updated by this routine with the number of data bytes
+ * transmitted in this packet.
+ *
+ * In accordance with Figure 14-30, the EP_NUM register must already have been
+ * written with the value to select the appropriate tx FIFO before this routine
+ * is called.
+ */
+static void omap1510_write_noniso_tx_fifo (struct usb_endpoint_instance
+ *endpoint)
+{
+ struct urb *urb = endpoint->tx_urb;
+
+ if (urb) {
+ unsigned int last, i;
+
+ UDCDBGA ("urb->buffer %p, buffer_length %d, actual_length %d",
+ urb->buffer, urb->buffer_length, urb->actual_length);
+ if ((last =
+ MIN (urb->actual_length - endpoint->sent,
+ endpoint->tx_packetSize))) {
+ u8 *cp = urb->buffer + endpoint->sent;
+
+ UDCDBGA ("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last);
+
+ if (((u32) cp & 1) == 0) { /* word aligned? */
+ outsw (UDC_DATA, cp, last >> 1);
+ } else { /* byte aligned. */
+ for (i = 0; i < (last >> 1); i++) {
+ u16 w = ((u16) cp[2 * i + 1] << 8) |
+ (u16) cp[2 * i];
+ outw (w, UDC_DATA);
+ }
+ }
+ if (last & 1) {
+ outb (*(cp + last - 1), UDC_DATA);
+ }
+ }
+ endpoint->last = last;
+ }
+}
+
+/* omap1510_read_noniso_rx_fifo
+ *
+ * This function implements TRM Figure 14-28.
+ *
+ * If the endpoint has an active rcv_urb, then the next packet of data is read
+ * from the rcv FIFO and written to rcv_urb->buffer at offset
+ * rcv_urb->actual_length to append the packet data to the data from any
+ * previous packets for this transfer. We assume that there is sufficient room
+ * left in the buffer to hold an entire packet of data.
+ *
+ * The return value is the number of bytes read from the FIFO for this packet.
+ *
+ * In accordance with Figure 14-28, the EP_NUM register must already have been
+ * written with the value to select the appropriate rcv FIFO before this routine
+ * is called.
+ */
+static int omap1510_read_noniso_rx_fifo (struct usb_endpoint_instance
+ *endpoint)
+{
+ struct urb *urb = endpoint->rcv_urb;
+ int len = 0;
+
+ if (urb) {
+ len = inw (UDC_RXFSTAT);
+
+ if (len) {
+ unsigned char *cp = urb->buffer + urb->actual_length;
+
+ insw (UDC_DATA, cp, len >> 1);
+ if (len & 1)
+ *(cp + len - 1) = inb (UDC_DATA);
+ }
+ }
+ return len;
+}
+
+/* omap1510_prepare_for_control_write_status
+ *
+ * This function implements TRM Figure 14-17.
+ *
+ * We have to deal here with non-autodecoded control writes that haven't already
+ * been dealt with by ep0_recv_setup. The non-autodecoded standard control
+ * write requests are: set/clear endpoint feature, set configuration, set
+ * interface, and set descriptor. ep0_recv_setup handles set/clear requests for
+ * ENDPOINT_HALT by halting the endpoint for a set request and resetting the
+ * endpoint for a clear request. ep0_recv_setup returns an error for
+ * SET_DESCRIPTOR requests which causes them to be terminated with a stall by
+ * the setup handler. A SET_INTERFACE request is handled by ep0_recv_setup by
+ * generating a DEVICE_SET_INTERFACE event. This leaves only the
+ * SET_CONFIGURATION event for us to deal with here.
+ *
+ */
+static void omap1510_prepare_for_control_write_status (struct urb *urb)
+{
+ struct usb_device_request *request = &urb->device_request;;
+
+ /* check for a SET_CONFIGURATION request */
+ if (request->bRequest == USB_REQ_SET_CONFIGURATION) {
+ int configuration = le16_to_cpu (request->wValue) & 0xff;
+ unsigned short devstat = inw (UDC_DEVSTAT);
+
+ if ((devstat & (UDC_ADD | UDC_CFG)) == UDC_ADD) {
+ /* device is currently in ADDRESSED state */
+ if (configuration) {
+ /* Assume the specified non-zero configuration
+ * value is valid and switch to the CONFIGURED
+ * state.
+ */
+ outw (UDC_Dev_Cfg, UDC_SYSCON2);
+ }
+ } else if ((devstat & UDC_CFG) == UDC_CFG) {
+ /* device is currently in CONFIGURED state */
+ if (!configuration) {
+ /* Switch to ADDRESSED state. */
+ outw (UDC_Clr_Cfg, UDC_SYSCON2);
+ }
+ }
+ }
+
+ /* select EP0 tx FIFO */
+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
+ /* clear endpoint (no data bytes in status stage) */
+ outw (UDC_Clr_EP, UDC_CTRL);
+ /* enable the EP0 tx FIFO */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ /* deselect the endpoint */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+}
+
+/* udc_state_transition_up
+ * udc_state_transition_down
+ *
+ * Helper functions to implement device state changes. The device states and
+ * the events that transition between them are:
+ *
+ * STATE_ATTACHED
+ * || /\
+ * \/ ||
+ * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET
+ * || /\
+ * \/ ||
+ * STATE_POWERED
+ * || /\
+ * \/ ||
+ * DEVICE_RESET DEVICE_POWER_INTERRUPTION
+ * || /\
+ * \/ ||
+ * STATE_DEFAULT
+ * || /\
+ * \/ ||
+ * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET
+ * || /\
+ * \/ ||
+ * STATE_ADDRESSED
+ * || /\
+ * \/ ||
+ * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED
+ * || /\
+ * \/ ||
+ * STATE_CONFIGURED
+ *
+ * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED
+ * to STATE_CONFIGURED) from the specified initial state to the specified final
+ * state, passing through each intermediate state on the way. If the initial
+ * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
+ * no state transitions will take place.
+ *
+ * udc_state_transition_down transitions down (in the direction from
+ * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
+ * specified final state, passing through each intermediate state on the way.
+ * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
+ * state, then no state transitions will take place.
+ *
+ * These functions must only be called with interrupts disabled.
+ */
+static void udc_state_transition_up (usb_device_state_t initial,
+ usb_device_state_t final)
+{
+ if (initial < final) {
+ switch (initial) {
+ case STATE_ATTACHED:
+ usbd_device_event_irq (udc_device,
+ DEVICE_HUB_CONFIGURED, 0);
+ if (final == STATE_POWERED)
+ break;
+ case STATE_POWERED:
+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+ if (final == STATE_DEFAULT)
+ break;
+ case STATE_DEFAULT:
+ usbd_device_event_irq (udc_device,
+ DEVICE_ADDRESS_ASSIGNED, 0);
+ if (final == STATE_ADDRESSED)
+ break;
+ case STATE_ADDRESSED:
+ usbd_device_event_irq (udc_device, DEVICE_CONFIGURED,
+ 0);
+ case STATE_CONFIGURED:
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static void udc_state_transition_down (usb_device_state_t initial,
+ usb_device_state_t final)
+{
+ if (initial > final) {
+ switch (initial) {
+ case STATE_CONFIGURED:
+ usbd_device_event_irq (udc_device, DEVICE_DE_CONFIGURED, 0);
+ if (final == STATE_ADDRESSED)
+ break;
+ case STATE_ADDRESSED:
+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+ if (final == STATE_DEFAULT)
+ break;
+ case STATE_DEFAULT:
+ usbd_device_event_irq (udc_device, DEVICE_POWER_INTERRUPTION, 0);
+ if (final == STATE_POWERED)
+ break;
+ case STATE_POWERED:
+ usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, 0);
+ case STATE_ATTACHED:
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/* Handle all device state changes.
+ * This function implements TRM Figure 14-21.
+ */
+static void omap1510_udc_state_changed (void)
+{
+ u16 bits;
+ u16 devstat = inw (UDC_DEVSTAT);
+
+ UDCDBGA ("state changed, devstat %x, old %x", devstat, udc_devstat);
+
+ bits = devstat ^ udc_devstat;
+ if (bits) {
+ if (bits & UDC_ATT) {
+ if (devstat & UDC_ATT) {
+ UDCDBG ("device attached and powered");
+ udc_state_transition_up (udc_device->device_state, STATE_POWERED);
+ } else {
+ UDCDBG ("device detached or unpowered");
+ udc_state_transition_down (udc_device->device_state, STATE_ATTACHED);
+ }
+ }
+ if (bits & UDC_USB_Reset) {
+ if (devstat & UDC_USB_Reset) {
+ UDCDBG ("device reset in progess");
+ udc_state_transition_down (udc_device->device_state, STATE_POWERED);
+ } else {
+ UDCDBG ("device reset completed");
+ }
+ }
+ if (bits & UDC_DEF) {
+ if (devstat & UDC_DEF) {
+ UDCDBG ("device entering default state");
+ udc_state_transition_up (udc_device->device_state, STATE_DEFAULT);
+ } else {
+ UDCDBG ("device leaving default state");
+ udc_state_transition_down (udc_device->device_state, STATE_POWERED);
+ }
+ }
+ if (bits & UDC_SUS) {
+ if (devstat & UDC_SUS) {
+ UDCDBG ("entering suspended state");
+ usbd_device_event_irq (udc_device, DEVICE_BUS_INACTIVE, 0);
+ } else {
+ UDCDBG ("leaving suspended state");
+ usbd_device_event_irq (udc_device, DEVICE_BUS_ACTIVITY, 0);
+ }
+ }
+ if (bits & UDC_R_WK_OK) {
+ UDCDBGA ("remote wakeup %s", (devstat & UDC_R_WK_OK)
+ ? "enabled" : "disabled");
+ }
+ if (bits & UDC_ADD) {
+ if (devstat & UDC_ADD) {
+ UDCDBG ("default -> addressed");
+ udc_state_transition_up (udc_device->device_state, STATE_ADDRESSED);
+ } else {
+ UDCDBG ("addressed -> default");
+ udc_state_transition_down (udc_device->device_state, STATE_DEFAULT);
+ }
+ }
+ if (bits & UDC_CFG) {
+ if (devstat & UDC_CFG) {
+ UDCDBG ("device configured");
+ /* The ep0_recv_setup function generates the
+ * DEVICE_CONFIGURED event when a
+ * USB_REQ_SET_CONFIGURATION setup packet is
+ * received, so we should already be in the
+ * state STATE_CONFIGURED.
+ */
+ udc_state_transition_up (udc_device->device_state, STATE_CONFIGURED);
+ } else {
+ UDCDBG ("device deconfigured");
+ udc_state_transition_down (udc_device->device_state, STATE_ADDRESSED);
+ }
+ }
+ }
+
+ /* Clear interrupt source */
+ outw (UDC_DS_Chg, UDC_IRQ_SRC);
+
+ /* Save current DEVSTAT */
+ udc_devstat = devstat;
+}
+
+/* Handle SETUP USB interrupt.
+ * This function implements TRM Figure 14-14.
+ */
+static void omap1510_udc_setup (struct usb_endpoint_instance *endpoint)
+{
+ UDCDBG ("-> Entering device setup");
+
+ do {
+ const int setup_pktsize = 8;
+ unsigned char *datap =
+ (unsigned char *) &ep0_urb->device_request;
+
+ /* Gain access to EP 0 setup FIFO */
+ outw (UDC_Setup_Sel, UDC_EP_NUM);
+
+ /* Read control request data */
+ insb (UDC_DATA, datap, setup_pktsize);
+
+ UDCDBGA ("EP0 setup read [%x %x %x %x %x %x %x %x]",
+ *(datap + 0), *(datap + 1), *(datap + 2),
+ *(datap + 3), *(datap + 4), *(datap + 5),
+ *(datap + 6), *(datap + 7));
+
+ /* Reset EP0 setup FIFO */
+ outw (0, UDC_EP_NUM);
+ } while (inw (UDC_IRQ_SRC) & UDC_Setup);
+
+ /* Try to process setup packet */
+ if (ep0_recv_setup (ep0_urb)) {
+ /* Not a setup packet, stall next EP0 transaction */
+ udc_stall_ep (0);
+ UDCDBG ("can't parse setup packet, still waiting for setup");
+ return;
+ }
+
+ /* Check direction */
+ if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
+ == USB_REQ_HOST2DEVICE) {
+ UDCDBG ("control write on EP0");
+ if (le16_to_cpu (ep0_urb->device_request.wLength)) {
+ /* We don't support control write data stages.
+ * The only standard control write request with a data
+ * stage is SET_DESCRIPTOR, and ep0_recv_setup doesn't
+ * support that so we just stall those requests. A
+ * function driver might support a non-standard
+ * write request with a data stage, but it isn't
+ * obvious what we would do with the data if we read it
+ * so we'll just stall it. It seems like the API isn't
+ * quite right here.
+ */
+#if 0
+ /* Here is what we would do if we did support control
+ * write data stages.
+ */
+ ep0_urb->actual_length = 0;
+ outw (0, UDC_EP_NUM);
+ /* enable the EP0 rx FIFO */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+#else
+ /* Stall this request */
+ UDCDBG ("Stalling unsupported EP0 control write data "
+ "stage.");
+ udc_stall_ep (0);
+#endif
+ } else {
+ omap1510_prepare_for_control_write_status (ep0_urb);
+ }
+ } else {
+ UDCDBG ("control read on EP0");
+ /* The ep0_recv_setup function has already placed our response
+ * packet data in ep0_urb->buffer and the packet length in
+ * ep0_urb->actual_length.
+ */
+ endpoint->tx_urb = ep0_urb;
+ endpoint->sent = 0;
+ /* select the EP0 tx FIFO */
+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
+ /* Write packet data to the FIFO. omap1510_write_noniso_tx_fifo
+ * will update endpoint->last with the number of bytes written
+ * to the FIFO.
+ */
+ omap1510_write_noniso_tx_fifo (endpoint);
+ /* enable the FIFO to start the packet transmission */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ /* deselect the EP0 tx FIFO */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+ }
+
+ UDCDBG ("<- Leaving device setup");
+}
+
+/* Handle endpoint 0 RX interrupt
+ * This routine implements TRM Figure 14-16.
+ */
+static void omap1510_udc_ep0_rx (struct usb_endpoint_instance *endpoint)
+{
+ unsigned short status;
+
+ UDCDBG ("RX on EP0");
+ /* select EP0 rx FIFO */
+ outw (UDC_EP_Sel, UDC_EP_NUM);
+
+ status = inw (UDC_STAT_FLG);
+
+ if (status & UDC_ACK) {
+ /* Check direction */
+ if ((ep0_urb->device_request.bmRequestType
+ & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) {
+ /* This rx interrupt must be for a control write data
+ * stage packet.
+ *
+ * We don't support control write data stages.
+ * We should never end up here.
+ */
+
+ /* clear the EP0 rx FIFO */
+ outw (UDC_Clr_EP, UDC_CTRL);
+
+ /* deselect the EP0 rx FIFO */
+ outw (0, UDC_EP_NUM);
+
+ UDCDBG ("Stalling unexpected EP0 control write "
+ "data stage packet");
+ udc_stall_ep (0);
+ } else {
+ /* This rx interrupt must be for a control read status
+ * stage packet.
+ */
+ UDCDBG ("ACK on EP0 control read status stage packet");
+ /* deselect EP0 rx FIFO */
+ outw (0, UDC_EP_NUM);
+ }
+ } else if (status & UDC_STALL) {
+ UDCDBG ("EP0 stall during RX");
+ /* deselect EP0 rx FIFO */
+ outw (0, UDC_EP_NUM);
+ } else {
+ /* deselect EP0 rx FIFO */
+ outw (0, UDC_EP_NUM);
+ }
+}
+
+/* Handle endpoint 0 TX interrupt
+ * This routine implements TRM Figure 14-18.
+ */
+static void omap1510_udc_ep0_tx (struct usb_endpoint_instance *endpoint)
+{
+ unsigned short status;
+ struct usb_device_request *request = &ep0_urb->device_request;
+
+ UDCDBG ("TX on EP0");
+ /* select EP0 TX FIFO */
+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
+
+ status = inw (UDC_STAT_FLG);
+ if (status & UDC_ACK) {
+ /* Check direction */
+ if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) ==
+ USB_REQ_HOST2DEVICE) {
+ /* This tx interrupt must be for a control write status
+ * stage packet.
+ */
+ UDCDBG ("ACK on EP0 control write status stage packet");
+ /* deselect EP0 TX FIFO */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+ } else {
+ /* This tx interrupt must be for a control read data
+ * stage packet.
+ */
+ int wLength = le16_to_cpu (request->wLength);
+
+ /* Update our count of bytes sent so far in this
+ * transfer.
+ */
+ endpoint->sent += endpoint->last;
+
+ /* We are finished with this transfer if we have sent
+ * all of the bytes in our tx urb (urb->actual_length)
+ * unless we need a zero-length terminating packet. We
+ * need a zero-length terminating packet if we returned
+ * fewer bytes than were requested (wLength) by the host,
+ * and the number of bytes we returned is an exact
+ * multiple of the packet size endpoint->tx_packetSize.
+ */
+ if ((endpoint->sent == ep0_urb->actual_length)
+ && ((ep0_urb->actual_length == wLength)
+ || (endpoint->last !=
+ endpoint->tx_packetSize))) {
+ /* Done with control read data stage. */
+ UDCDBG ("control read data stage complete");
+ /* deselect EP0 TX FIFO */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+ /* select EP0 RX FIFO to prepare for control
+ * read status stage.
+ */
+ outw (UDC_EP_Sel, UDC_EP_NUM);
+ /* clear the EP0 RX FIFO */
+ outw (UDC_Clr_EP, UDC_CTRL);
+ /* enable the EP0 RX FIFO */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ /* deselect the EP0 RX FIFO */
+ outw (0, UDC_EP_NUM);
+ } else {
+ /* We still have another packet of data to send
+ * in this control read data stage or else we
+ * need a zero-length terminating packet.
+ */
+ UDCDBG ("ACK control read data stage packet");
+ omap1510_write_noniso_tx_fifo (endpoint);
+ /* enable the EP0 tx FIFO to start transmission */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ /* deselect EP0 TX FIFO */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+ }
+ }
+ } else if (status & UDC_STALL) {
+ UDCDBG ("EP0 stall during TX");
+ /* deselect EP0 TX FIFO */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+ } else {
+ /* deselect EP0 TX FIFO */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+ }
+}
+
+/* Handle RX transaction on non-ISO endpoint.
+ * This function implements TRM Figure 14-27.
+ * The ep argument is a physical endpoint number for a non-ISO OUT endpoint
+ * in the range 1 to 15.
+ */
+static void omap1510_udc_epn_rx (int ep)
+{
+ unsigned short status;
+
+ /* Check endpoint status */
+ status = inw (UDC_STAT_FLG);
+
+ if (status & UDC_ACK) {
+ int nbytes;
+ struct usb_endpoint_instance *endpoint =
+ omap1510_find_ep (ep);
+
+ nbytes = omap1510_read_noniso_rx_fifo (endpoint);
+ usbd_rcv_complete (endpoint, nbytes, 0);
+
+ /* enable rx FIFO to prepare for next packet */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ } else if (status & UDC_STALL) {
+ UDCDBGA ("STALL on RX endpoint %d", ep);
+ } else if (status & UDC_NAK) {
+ UDCDBGA ("NAK on RX ep %d", ep);
+ } else {
+ serial_printf ("omap-bi: RX on ep %d with status %x", ep,
+ status);
+ }
+}
+
+/* Handle TX transaction on non-ISO endpoint.
+ * This function implements TRM Figure 14-29.
+ * The ep argument is a physical endpoint number for a non-ISO IN endpoint
+ * in the range 16 to 30.
+ */
+static void omap1510_udc_epn_tx (int ep)
+{
+ unsigned short status;
+
+ /*serial_printf("omap1510_udc_epn_tx( %x )\n",ep); */
+
+ /* Check endpoint status */
+ status = inw (UDC_STAT_FLG);
+
+ if (status & UDC_ACK) {
+ struct usb_endpoint_instance *endpoint =
+ omap1510_find_ep (ep);
+
+ /* We need to transmit a terminating zero-length packet now if
+ * we have sent all of the data in this URB and the transfer
+ * size was an exact multiple of the packet size.
+ */
+ if (endpoint->tx_urb
+ && (endpoint->last == endpoint->tx_packetSize)
+ && (endpoint->tx_urb->actual_length - endpoint->sent -
+ endpoint->last == 0)) {
+ /* Prepare to transmit a zero-length packet. */
+ endpoint->sent += endpoint->last;
+ /* write 0 bytes of data to FIFO */
+ omap1510_write_noniso_tx_fifo (endpoint);
+ /* enable tx FIFO to start transmission */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ } else if (endpoint->tx_urb
+ && endpoint->tx_urb->actual_length) {
+ /* retire the data that was just sent */
+ usbd_tx_complete (endpoint);
+ /* Check to see if we have more data ready to transmit
+ * now.
+ */
+ if (endpoint->tx_urb
+ && endpoint->tx_urb->actual_length) {
+ /* write data to FIFO */
+ omap1510_write_noniso_tx_fifo (endpoint);
+ /* enable tx FIFO to start transmission */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ }
+ }
+ } else if (status & UDC_STALL) {
+ UDCDBGA ("STALL on TX endpoint %d", ep);
+ } else if (status & UDC_NAK) {
+ UDCDBGA ("NAK on TX endpoint %d", ep);
+ } else {
+ /*serial_printf("omap-bi: TX on ep %d with status %x\n", ep, status); */
+ }
+}
+
+
+/*
+-------------------------------------------------------------------------------
+*/
+
+/* Handle general USB interrupts and dispatch according to type.
+ * This function implements TRM Figure 14-13.
+ */
+void omap1510_udc_irq (void)
+{
+ u16 irq_src = inw (UDC_IRQ_SRC);
+ int valid_irq = 0;
+
+ if (!(irq_src & ~UDC_SOF_Flg)) /* ignore SOF interrupts ) */
+ return;
+
+ UDCDBGA ("< IRQ #%d start >- %x", udc_interrupts, irq_src);
+ /*serial_printf("< IRQ #%d start >- %x\n", udc_interrupts, irq_src); */
+
+ if (irq_src & UDC_DS_Chg) {
+ /* Device status changed */
+ omap1510_udc_state_changed ();
+ valid_irq++;
+ }
+ if (irq_src & UDC_EP0_RX) {
+ /* Endpoint 0 receive */
+ outw (UDC_EP0_RX, UDC_IRQ_SRC); /* ack interrupt */
+ omap1510_udc_ep0_rx (udc_device->bus->endpoint_array + 0);
+ valid_irq++;
+ }
+ if (irq_src & UDC_EP0_TX) {
+ /* Endpoint 0 transmit */
+ outw (UDC_EP0_TX, UDC_IRQ_SRC); /* ack interrupt */
+ omap1510_udc_ep0_tx (udc_device->bus->endpoint_array + 0);
+ valid_irq++;
+ }
+ if (irq_src & UDC_Setup) {
+ /* Device setup */
+ omap1510_udc_setup (udc_device->bus->endpoint_array + 0);
+ valid_irq++;
+ }
+ /*if (!valid_irq) */
+ /* serial_printf("unknown interrupt, IRQ_SRC %.4x\n", irq_src); */
+ UDCDBGA ("< IRQ #%d end >", udc_interrupts);
+ udc_interrupts++;
+}
+
+/* This function implements TRM Figure 14-26. */
+void omap1510_udc_noniso_irq (void)
+{
+ unsigned short epnum;
+ unsigned short irq_src = inw (UDC_IRQ_SRC);
+ int valid_irq = 0;
+
+ if (!(irq_src & (UDC_EPn_RX | UDC_EPn_TX)))
+ return;
+
+ UDCDBGA ("non-ISO IRQ, IRQ_SRC %x", inw (UDC_IRQ_SRC));
+
+ if (irq_src & UDC_EPn_RX) { /* Endpoint N OUT transaction */
+ /* Determine the endpoint number for this interrupt */
+ epnum = (inw (UDC_EPN_STAT) & 0x0f00) >> 8;
+ UDCDBGA ("RX on ep %x", epnum);
+
+ /* acknowledge interrupt */
+ outw (UDC_EPn_RX, UDC_IRQ_SRC);
+
+ if (epnum) {
+ /* select the endpoint FIFO */
+ outw (UDC_EP_Sel | epnum, UDC_EP_NUM);
+
+ omap1510_udc_epn_rx (epnum);
+
+ /* deselect the endpoint FIFO */
+ outw (epnum, UDC_EP_NUM);
+ }
+ valid_irq++;
+ }
+ if (irq_src & UDC_EPn_TX) { /* Endpoint N IN transaction */
+ /* Determine the endpoint number for this interrupt */
+ epnum = (inw (UDC_EPN_STAT) & 0x000f) | USB_DIR_IN;
+ UDCDBGA ("TX on ep %x", epnum);
+
+ /* acknowledge interrupt */
+ outw (UDC_EPn_TX, UDC_IRQ_SRC);
+
+ if (epnum) {
+ /* select the endpoint FIFO */
+ outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM);
+
+ omap1510_udc_epn_tx (epnum);
+
+ /* deselect the endpoint FIFO */
+ outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
+ }
+ valid_irq++;
+ }
+ if (!valid_irq)
+ serial_printf (": unknown non-ISO interrupt, IRQ_SRC %.4x\n",
+ irq_src);
+}
+
+/*
+-------------------------------------------------------------------------------
+*/
+
+
+/*
+ * Start of public functions.
+ */
+
+/* Called to start packet transmission. */
+int udc_endpoint_write (struct usb_endpoint_instance *endpoint)
+{
+ unsigned short epnum =
+ endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK;
+
+ UDCDBGA ("Starting transmit on ep %x", epnum);
+
+ if (endpoint->tx_urb) {
+ /* select the endpoint FIFO */
+ outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM);
+ /* write data to FIFO */
+ omap1510_write_noniso_tx_fifo (endpoint);
+ /* enable tx FIFO to start transmission */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ /* deselect the endpoint FIFO */
+ outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
+ }
+
+ return 0;
+}
+
+/* Start to initialize h/w stuff */
+int udc_init (void)
+{
+ u16 udc_rev;
+ uchar value;
+ ulong gpio;
+ int i;
+
+ /* Let the device settle down before we start */
+ for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000);
+
+ udc_device = NULL;
+
+ UDCDBG ("starting");
+
+ /* Check peripheral reset. Must be 1 to make sure
+ MPU TIPB peripheral reset is inactive */
+ UDCREG (ARM_RSTCT2);
+
+ /* Set and check clock control.
+ * We might ought to be using the clock control API to do
+ * this instead of fiddling with the clock registers directly
+ * here.
+ */
+ outw ((1 << 4) | (1 << 5), CLOCK_CTRL);
+ UDCREG (CLOCK_CTRL);
+
+#ifdef CONFIG_OMAP1510
+ /* This code was originally implemented for OMAP1510 and
+ * therefore is only applicable for OMAP1510 boards. For
+ * OMAP5912 or OMAP16xx the register APLL_CTRL does not
+ * exist and DPLL_CTRL is already configured.
+ */
+
+ /* Set and check APLL */
+ outw (0x0008, APLL_CTRL);
+ UDCREG (APLL_CTRL);
+ /* Set and check DPLL */
+ outw (0x2210, DPLL_CTRL);
+ UDCREG (DPLL_CTRL);
+#endif
+ /* Set and check SOFT
+ * The below line of code has been changed to perform a
+ * read-modify-write instead of a simple write for
+ * configuring the SOFT_REQ register. This allows the code
+ * to be compatible with OMAP5912 and OMAP16xx devices
+ */
+ outw ((1 << 4) | (1 << 3) | 1 | (inw(SOFT_REQ)), SOFT_REQ);
+
+ /* Short delay to wait for DPLL */
+ udelay (1000);
+
+ /* Print banner with device revision */
+ udc_rev = inw (UDC_REV) & 0xff;
+#ifdef CONFIG_OMAP1510
+ printf ("USB: TI OMAP1510 USB function module rev %d.%d\n",
+ udc_rev >> 4, udc_rev & 0xf);
+#endif
+
+#ifdef CONFIG_OMAP1610
+ printf ("USB: TI OMAP5912 USB function module rev %d.%d\n",
+ udc_rev >> 4, udc_rev & 0xf);
+#endif
+
+#ifdef CONFIG_OMAP_SX1
+ i2c_read (0x32, 0x04, 1, &value, 1);
+ value |= 0x04;
+ i2c_write (0x32, 0x04, 1, &value, 1);
+
+ i2c_read (0x32, 0x03, 1, &value, 1);
+ value |= 0x01;
+ i2c_write (0x32, 0x03, 1, &value, 1);
+
+ gpio = inl(GPIO_PIN_CONTROL_REG);
+ gpio |= 0x0002; /* A_IRDA_OFF */
+ gpio |= 0x0800; /* A_SWITCH */
+ gpio |= 0x8000; /* A_USB_ON */
+ outl (gpio, GPIO_PIN_CONTROL_REG);
+
+ gpio = inl(GPIO_DIR_CONTROL_REG);
+ gpio &= ~0x0002; /* A_IRDA_OFF */
+ gpio &= ~0x0800; /* A_SWITCH */
+ gpio &= ~0x8000; /* A_USB_ON */
+ outl (gpio, GPIO_DIR_CONTROL_REG);
+
+ gpio = inl(GPIO_DATA_OUTPUT_REG);
+ gpio |= 0x0002; /* A_IRDA_OFF */
+ gpio &= ~0x0800; /* A_SWITCH */
+ gpio &= ~0x8000; /* A_USB_ON */
+ outl (gpio, GPIO_DATA_OUTPUT_REG);
+#endif
+
+ /* The VBUS_MODE bit selects whether VBUS detection is done via
+ * software (1) or hardware (0). When software detection is
+ * selected, VBUS_CTRL selects whether USB is not connected (0)
+ * or connected (1).
+ */
+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0);
+ outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0);
+ UDCREGL (FUNC_MUX_CTRL_0);
+
+ /*
+ * At this point, device is ready for configuration...
+ */
+
+ UDCDBG ("disable USB interrupts");
+ outw (0, UDC_IRQ_EN);
+ UDCREG (UDC_IRQ_EN);
+
+ UDCDBG ("disable USB DMA");
+ outw (0, UDC_DMA_IRQ_EN);
+ UDCREG (UDC_DMA_IRQ_EN);
+
+ UDCDBG ("initialize SYSCON1");
+ outw (UDC_Self_Pwr | UDC_Pullup_En, UDC_SYSCON1);
+ UDCREG (UDC_SYSCON1);
+
+ return 0;
+}
+
+/* Stall endpoint */
+static void udc_stall_ep (unsigned int ep_addr)
+{
+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+
+ UDCDBGA ("stall ep_addr %d", ep_addr);
+
+ /* REVISIT?
+ * The OMAP TRM section 14.2.4.2 says we must check that the FIFO
+ * is empty before halting the endpoint. The current implementation
+ * doesn't check that the FIFO is empty.
+ */
+
+ if (!ep_num) {
+ outw (UDC_Stall_Cmd, UDC_SYSCON2);
+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
+ if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) {
+ /* we have a valid rx endpoint, so halt it */
+ outw (UDC_EP_Sel | ep_num, UDC_EP_NUM);
+ outw (UDC_Set_Halt, UDC_CTRL);
+ outw (ep_num, UDC_EP_NUM);
+ }
+ } else {
+ if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) {
+ /* we have a valid tx endpoint, so halt it */
+ outw (UDC_EP_Sel | UDC_EP_Dir | ep_num, UDC_EP_NUM);
+ outw (UDC_Set_Halt, UDC_CTRL);
+ outw (ep_num, UDC_EP_NUM);
+ }
+ }
+}
+
+/* Reset endpoint */
+#if 0
+static void udc_reset_ep (unsigned int ep_addr)
+{
+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+
+ UDCDBGA ("reset ep_addr %d", ep_addr);
+
+ if (!ep_num) {
+ /* control endpoint 0 can't be reset */
+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
+ UDCDBGA ("UDC_EP_RX(%d) = 0x%04x", ep_num,
+ inw (UDC_EP_RX (ep_num)));
+ if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) {
+ /* we have a valid rx endpoint, so reset it */
+ outw (ep_num | UDC_EP_Sel, UDC_EP_NUM);
+ outw (UDC_Reset_EP, UDC_CTRL);
+ outw (ep_num, UDC_EP_NUM);
+ UDCDBGA ("OUT endpoint %d reset", ep_num);
+ }
+ } else {
+ UDCDBGA ("UDC_EP_TX(%d) = 0x%04x", ep_num,
+ inw (UDC_EP_TX (ep_num)));
+ /* Resetting of tx endpoints seems to be causing the USB function
+ * module to fail, which causes problems when the driver is
+ * uninstalled. We'll skip resetting tx endpoints for now until
+ * we figure out what the problem is.
+ */
+#if 0
+ if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) {
+ /* we have a valid tx endpoint, so reset it */
+ outw (ep_num | UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
+ outw (UDC_Reset_EP, UDC_CTRL);
+ outw (ep_num | UDC_EP_Dir, UDC_EP_NUM);
+ UDCDBGA ("IN endpoint %d reset", ep_num);
+ }
+#endif
+ }
+}
+#endif
+
+/* ************************************************************************** */
+
+/**
+ * udc_check_ep - check logical endpoint
+ *
+ * Return physical endpoint number to use for this logical endpoint or zero if not valid.
+ */
+#if 0
+int udc_check_ep (int logical_endpoint, int packetsize)
+{
+ if ((logical_endpoint == 0x80) ||
+ ((logical_endpoint & 0x8f) != logical_endpoint)) {
+ return 0;
+ }
+
+ switch (packetsize) {
+ case 8:
+ case 16:
+ case 32:
+ case 64:
+ case 128:
+ case 256:
+ case 512:
+ break;
+ default:
+ return 0;
+ }
+
+ return EP_ADDR_TO_PHYS_EP (logical_endpoint);
+}
+#endif
+
+/*
+ * udc_setup_ep - setup endpoint
+ *
+ * Associate a physical endpoint with endpoint_instance
+ */
+void udc_setup_ep (struct usb_device_instance *device,
+ unsigned int ep, struct usb_endpoint_instance *endpoint)
+{
+ UDCDBGA ("setting up endpoint addr %x", endpoint->endpoint_address);
+
+ /* This routine gets called by bi_modinit for endpoint 0 and from
+ * bi_config for all of the other endpoints. bi_config gets called
+ * during the DEVICE_CREATE, DEVICE_CONFIGURED, and
+ * DEVICE_SET_INTERFACE events. We need to reconfigure the OMAP packet
+ * RAM after bi_config scans the selected device configuration and
+ * initializes the endpoint structures, but before this routine enables
+ * the OUT endpoint FIFOs. Since bi_config calls this routine in a
+ * loop for endpoints 1 through UDC_MAX_ENDPOINTS, we reconfigure our
+ * packet RAM here when ep==1.
+ * I really hate to do this here, but it seems like the API exported
+ * by the USB bus interface controller driver to the usbd-bi module
+ * isn't quite right so there is no good place to do this.
+ */
+ if (ep == 1) {
+ omap1510_deconfigure_device ();
+ omap1510_configure_device (device);
+ }
+
+ if (endpoint && (ep < UDC_MAX_ENDPOINTS)) {
+ int ep_addr = endpoint->endpoint_address;
+
+ if (!ep_addr) {
+ /* nothing to do for endpoint 0 */
+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+ /* nothing to do for IN (tx) endpoints */
+ } else { /* OUT (rx) endpoint */
+ if (endpoint->rcv_packetSize) {
+ /*struct urb* urb = &(urb_out_array[ep&0xFF]); */
+ /*urb->endpoint = endpoint; */
+ /*urb->device = device; */
+ /*urb->buffer_length = sizeof(urb->buffer); */
+
+ /*endpoint->rcv_urb = urb; */
+ omap1510_prepare_endpoint_for_rx (ep_addr);
+ }
+ }
+ }
+}
+
+/**
+ * udc_disable_ep - disable endpoint
+ * @ep:
+ *
+ * Disable specified endpoint
+ */
+#if 0
+void udc_disable_ep (unsigned int ep_addr)
+{
+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+ struct usb_endpoint_instance *endpoint = omap1510_find_ep (ep_addr); /*udc_device->bus->endpoint_array + ep; */
+
+ UDCDBGA ("disable ep_addr %d", ep_addr);
+
+ if (!ep_num) {
+ /* nothing to do for endpoint 0 */ ;
+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+ if (endpoint->tx_packetSize) {
+ /* we have a valid tx endpoint */
+ /*usbd_flush_tx(endpoint); */
+ endpoint->tx_urb = NULL;
+ }
+ } else {
+ if (endpoint->rcv_packetSize) {
+ /* we have a valid rx endpoint */
+ /*usbd_flush_rcv(endpoint); */
+ endpoint->rcv_urb = NULL;
+ }
+ }
+}
+#endif
+
+/* ************************************************************************** */
+
+/**
+ * udc_connected - is the USB cable connected
+ *
+ * Return non-zero if cable is connected.
+ */
+#if 0
+int udc_connected (void)
+{
+ return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT);
+}
+#endif
+
+/* Turn on the USB connection by enabling the pullup resistor */
+void udc_connect (void)
+{
+ UDCDBG ("connect, enable Pullup");
+ outl (0x00000018, FUNC_MUX_CTRL_D);
+}
+
+/* Turn off the USB connection by disabling the pullup resistor */
+void udc_disconnect (void)
+{
+ UDCDBG ("disconnect, disable Pullup");
+ outl (0x00000000, FUNC_MUX_CTRL_D);
+}
+
+/* ************************************************************************** */
+
+
+/*
+ * udc_disable_interrupts - disable interrupts
+ * switch off interrupts
+ */
+#if 0
+void udc_disable_interrupts (struct usb_device_instance *device)
+{
+ UDCDBG ("disabling all interrupts");
+ outw (0, UDC_IRQ_EN);
+}
+#endif
+
+/* ************************************************************************** */
+
+/**
+ * udc_ep0_packetsize - return ep0 packetsize
+ */
+#if 0
+int udc_ep0_packetsize (void)
+{
+ return EP0_PACKETSIZE;
+}
+#endif
+
+/* Switch on the UDC */
+void udc_enable (struct usb_device_instance *device)
+{
+ UDCDBGA ("enable device %p, status %d", device, device->status);
+
+ /* initialize driver state variables */
+ udc_devstat = 0;
+
+ /* Save the device structure pointer */
+ udc_device = device;
+
+ /* Setup ep0 urb */
+ if (!ep0_urb) {
+ ep0_urb =
+ usbd_alloc_urb (udc_device,
+ udc_device->bus->endpoint_array);
+ } else {
+ serial_printf ("udc_enable: ep0_urb already allocated %p\n",
+ ep0_urb);
+ }
+
+ UDCDBG ("Check clock status");
+ UDCREG (STATUS_REQ);
+
+ /* The VBUS_MODE bit selects whether VBUS detection is done via
+ * software (1) or hardware (0). When software detection is
+ * selected, VBUS_CTRL selects whether USB is not connected (0)
+ * or connected (1).
+ */
+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_CTRL | UDC_VBUS_MODE,
+ FUNC_MUX_CTRL_0);
+ UDCREGL (FUNC_MUX_CTRL_0);
+
+ omap1510_configure_device (device);
+}
+
+/* Switch off the UDC */
+void udc_disable (void)
+{
+ UDCDBG ("disable UDC");
+
+ omap1510_deconfigure_device ();
+
+ /* The VBUS_MODE bit selects whether VBUS detection is done via
+ * software (1) or hardware (0). When software detection is
+ * selected, VBUS_CTRL selects whether USB is not connected (0)
+ * or connected (1).
+ */
+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0);
+ outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0);
+ UDCREGL (FUNC_MUX_CTRL_0);
+
+ /* Free ep0 URB */
+ if (ep0_urb) {
+ /*usbd_dealloc_urb(ep0_urb); */
+ ep0_urb = NULL;
+ }
+
+ /* Reset device pointer.
+ * We ought to do this here to balance the initialization of udc_device
+ * in udc_enable, but some of our other exported functions get called
+ * by the bus interface driver after udc_disable, so we have to hang on
+ * to the device pointer to avoid a null pointer dereference. */
+ /* udc_device = NULL; */
+}
+
+/**
+ * udc_startup - allow udc code to do any additional startup
+ */
+void udc_startup_events (struct usb_device_instance *device)
+{
+ /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */
+ usbd_device_event_irq (device, DEVICE_INIT, 0);
+
+ /* The DEVICE_CREATE event puts the USB device in the state
+ * STATE_ATTACHED.
+ */
+ usbd_device_event_irq (device, DEVICE_CREATE, 0);
+
+ /* Some USB controller driver implementations signal
+ * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here.
+ * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED,
+ * and DEVICE_RESET causes a transition to the state STATE_DEFAULT.
+ * The OMAP USB client controller has the capability to detect when the
+ * USB cable is connected to a powered USB bus via the ATT bit in the
+ * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and
+ * DEVICE_RESET events until later.
+ */
+
+ udc_enable (device);
+}
+
+/**
+ * udc_irq - do pseudo interrupts
+ */
+void udc_irq(void)
+{
+ /* Loop while we have interrupts.
+ * If we don't do this, the input chain
+ * polling delay is likely to miss
+ * host requests.
+ */
+ while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) {
+ /* Handle any new IRQs */
+ omap1510_udc_irq ();
+ omap1510_udc_noniso_irq ();
+ }
+}
+
+/* Flow control */
+void udc_set_nak(int epid)
+{
+ /* TODO: implement this functionality in omap1510 */
+}
+
+void udc_unset_nak (int epid)
+{
+ /* TODO: implement this functionality in omap1510 */
+}