diff options
Diffstat (limited to 'drivers/usb/host/ehci-fsl.c')
| -rw-r--r-- | drivers/usb/host/ehci-fsl.c | 38 |
1 files changed, 36 insertions, 2 deletions
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 1ca7cf5..6cb4d98 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -14,9 +14,12 @@ #include <asm/io.h> #include <usb/ehci-fsl.h> #include <hwconfig.h> +#include <asm/fsl_errata.h> #include "ehci.h" +static void set_txfifothresh(struct usb_ehci *, u32); + /* Check USB PHY clock valid */ static int usb_phy_clk_valid(struct usb_ehci *ehci) { @@ -41,11 +44,23 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct usb_ehci *ehci = NULL; const char *phy_type = NULL; size_t len; + char current_usb_controller[5]; #ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY char usb_phy[5]; usb_phy[0] = '\0'; #endif + if (has_erratum_a007075()) { + /* + * A 5ms delay is needed after applying soft-reset to the + * controller to let external ULPI phy come out of reset. + * This delay needs to be added before re-initializing + * the controller after soft-resetting completes + */ + mdelay(5); + } + memset(current_usb_controller, '\0', 5); + snprintf(current_usb_controller, 4, "usb%d", index+1); switch (index) { case 0: @@ -70,8 +85,9 @@ int ehci_hcd_init(int index, enum usb_init_type init, out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB); /* Init phy */ - if (hwconfig_sub("usb1", "phy_type")) - phy_type = hwconfig_subarg("usb1", "phy_type", &len); + if (hwconfig_sub(current_usb_controller, "phy_type")) + phy_type = hwconfig_subarg(current_usb_controller, + "phy_type", &len); else phy_type = getenv("usb_phy_type"); @@ -109,6 +125,10 @@ int ehci_hcd_init(int index, enum usb_init_type init, in_le32(&ehci->usbmode); + if (SVR_SOC_VER(get_svr()) == SVR_T4240 && + IS_SVR_REV(get_svr(), 2, 0)) + set_txfifothresh(ehci, TXFIFOTHRESH); + return 0; } @@ -120,3 +140,17 @@ int ehci_hcd_stop(int index) { return 0; } + +/* + * Setting the value of TXFIFO_THRESH field in TXFILLTUNING register + * to counter DDR latencies in writing data into Tx buffer. + * This prevents Tx buffer from getting underrun + */ +static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh) +{ + u32 cmd; + cmd = ehci_readl(&ehci->txfilltuning); + cmd &= ~TXFIFO_THRESH_MASK; + cmd |= TXFIFO_THRESH(txfifo_thresh); + ehci_writel(&ehci->txfilltuning, cmd); +} |