diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/bootcount/bootcount.c | 5 | ||||
| -rw-r--r-- | drivers/i2c/Makefile | 1 | ||||
| -rw-r--r-- | drivers/i2c/ppc4xx_i2c.c | 444 | ||||
| -rw-r--r-- | drivers/net/4xx_enet.c | 2069 | ||||
| -rw-r--r-- | drivers/net/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/xilinx_ll_temac.c | 15 | ||||
| -rw-r--r-- | drivers/net/xilinx_ll_temac_sdma.c | 59 | ||||
| -rw-r--r-- | drivers/net/xilinx_ll_temac_sdma.h | 11 | ||||
| -rw-r--r-- | drivers/pci/pci_indirect.c | 38 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-hcd.c | 1 |
10 files changed, 3 insertions, 2641 deletions
diff --git a/drivers/bootcount/bootcount.c b/drivers/bootcount/bootcount.c index 0299a5a..8b499fe 100644 --- a/drivers/bootcount/bootcount.c +++ b/drivers/bootcount/bootcount.c @@ -20,11 +20,6 @@ QE_MURAM_SIZE - 2 * sizeof(u32)) #endif /* defined(CONFIG_QE) */ -#if defined(CONFIG_4xx) -#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_OCM_DATA_ADDR + \ - CONFIG_SYS_BOOTCOUNT_ADDR) -#endif /* defined(CONFIG_4xx) */ - #endif /* !defined(CONFIG_SYS_BOOTCOUNT_ADDR) */ /* Now implement the generic default functions */ diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index d20fe7b..4bbf0c9 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o obj-$(CONFIG_SYS_I2C_MXS) += mxs_i2c.o obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o -obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o obj-$(CONFIG_SYS_I2C_ROCKCHIP) += rk_i2c.o obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o exynos_hs_i2c.o diff --git a/drivers/i2c/ppc4xx_i2c.c b/drivers/i2c/ppc4xx_i2c.c deleted file mode 100644 index 8a38d11..0000000 --- a/drivers/i2c/ppc4xx_i2c.c +++ /dev/null @@ -1,444 +0,0 @@ -/* - * (C) Copyright 2007-2009 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * based on work by Anne Sophie Harnois <anne-sophie.harnois@nextream.fr> - * - * (C) Copyright 2001 - * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net - * - * SPDX-License-Identifier: GPL-2.0+ - * - * NOTE: This driver should be converted to driver model before June 2017. - * Please see doc/driver-model/i2c-howto.txt for instructions. - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/ppc4xx-i2c.h> -#include <i2c.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -static inline struct ppc4xx_i2c *ppc4xx_get_i2c(int hwadapnr) -{ - unsigned long base; - -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) - base = CONFIG_SYS_PERIPHERAL_BASE + 0x00000700 + (hwadapnr * 0x100); -#elif defined(CONFIG_440) || defined(CONFIG_405EX) -/* all remaining 440 variants */ - base = CONFIG_SYS_PERIPHERAL_BASE + 0x00000400 + (hwadapnr * 0x100); -#else -/* all 405 variants */ - base = 0xEF600500 + (hwadapnr * 0x100); -#endif - return (struct ppc4xx_i2c *)base; -} - -static void _i2c_bus_reset(struct i2c_adapter *adap) -{ - struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr); - int i; - u8 dc; - - /* Reset status register */ - /* write 1 in SCMP and IRQA to clear these fields */ - out_8(&i2c->sts, 0x0A); - - /* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */ - out_8(&i2c->extsts, 0x8F); - - /* Place chip in the reset state */ - out_8(&i2c->xtcntlss, IIC_XTCNTLSS_SRST); - - /* Check if bus is free */ - dc = in_8(&i2c->directcntl); - if (!DIRCTNL_FREE(dc)){ - /* Try to set bus free state */ - out_8(&i2c->directcntl, IIC_DIRCNTL_SDAC | IIC_DIRCNTL_SCC); - - /* Wait until we regain bus control */ - for (i = 0; i < 100; ++i) { - dc = in_8(&i2c->directcntl); - if (DIRCTNL_FREE(dc)) - break; - - /* Toggle SCL line */ - dc ^= IIC_DIRCNTL_SCC; - out_8(&i2c->directcntl, dc); - udelay(10); - dc ^= IIC_DIRCNTL_SCC; - out_8(&i2c->directcntl, dc); - } - } - - /* Remove reset */ - out_8(&i2c->xtcntlss, 0); -} - -static void ppc4xx_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) -{ - struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr); - int val, divisor; - -#ifdef CONFIG_SYS_I2C_INIT_BOARD - /* - * Call board specific i2c bus reset routine before accessing the - * environment, which might be in a chip on that bus. For details - * about this problem see doc/I2C_Edge_Conditions. - */ - i2c_init_board(); -#endif - - /* Handle possible failed I2C state */ - /* FIXME: put this into i2c_init_board()? */ - _i2c_bus_reset(adap); - - /* clear lo master address */ - out_8(&i2c->lmadr, 0); - - /* clear hi master address */ - out_8(&i2c->hmadr, 0); - - /* clear lo slave address */ - out_8(&i2c->lsadr, 0); - - /* clear hi slave address */ - out_8(&i2c->hsadr, 0); - - /* Clock divide Register */ - /* set divisor according to freq_opb */ - divisor = (get_OPB_freq() - 1) / 10000000; - if (divisor == 0) - divisor = 1; - out_8(&i2c->clkdiv, divisor); - - /* no interrupts */ - out_8(&i2c->intrmsk, 0); - - /* clear transfer count */ - out_8(&i2c->xfrcnt, 0); - - /* clear extended control & stat */ - /* write 1 in SRC SRS SWC SWS to clear these fields */ - out_8(&i2c->xtcntlss, 0xF0); - - /* Mode Control Register - Flush Slave/Master data buffer */ - out_8(&i2c->mdcntl, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB); - - val = in_8(&i2c->mdcntl); - - /* Ignore General Call, slave transfers are ignored, - * disable interrupts, exit unknown bus state, enable hold - * SCL 100kHz normaly or FastMode for 400kHz and above - */ - - val |= IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL; - if (speed >= 400000) - val |= IIC_MDCNTL_FSM; - out_8(&i2c->mdcntl, val); - - /* clear control reg */ - out_8(&i2c->cntl, 0x00); -} - -/* - * This code tries to use the features of the 405GP i2c - * controller. It will transfer up to 4 bytes in one pass - * on the loop. It only does out_8((u8 *)lbz) to the buffer when it - * is possible to do out16(lhz) transfers. - * - * cmd_type is 0 for write 1 for read. - * - * addr_len can take any value from 0-255, it is only limited - * by the char, we could make it larger if needed. If it is - * 0 we skip the address write cycle. - * - * Typical case is a Write of an addr followd by a Read. The - * IBM FAQ does not cover this. On the last byte of the write - * we don't set the creg CHT bit but the RPST bit. - * - * It does not support address only transfers, there must be - * a data part. If you want to write the address yourself, put - * it in the data pointer. - * - * It does not support transfer to/from address 0. - * - * It does not check XFRCNT. - */ -static int _i2c_transfer(struct i2c_adapter *adap, - unsigned char cmd_type, - unsigned char chip, - unsigned char addr[], - unsigned char addr_len, - unsigned char data[], - unsigned short data_len) -{ - struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr); - u8 *ptr; - int reading; - int tran, cnt; - int result; - int status; - int i; - u8 creg; - - if (data == 0 || data_len == 0) { - /* Don't support data transfer of no length or to address 0 */ - printf( "i2c_transfer: bad call\n" ); - return IIC_NOK; - } - if (addr && addr_len) { - ptr = addr; - cnt = addr_len; - reading = 0; - } else { - ptr = data; - cnt = data_len; - reading = cmd_type; - } - - /* Clear Stop Complete Bit */ - out_8(&i2c->sts, IIC_STS_SCMP); - - /* Check init */ - i = 10; - do { - /* Get status */ - status = in_8(&i2c->sts); - i--; - } while ((status & IIC_STS_PT) && (i > 0)); - - if (status & IIC_STS_PT) { - result = IIC_NOK_TOUT; - return(result); - } - - /* flush the Master/Slave Databuffers */ - out_8(&i2c->mdcntl, in_8(&i2c->mdcntl) | - IIC_MDCNTL_FMDB | IIC_MDCNTL_FSDB); - - /* need to wait 4 OPB clocks? code below should take that long */ - - /* 7-bit adressing */ - out_8(&i2c->hmadr, 0); - out_8(&i2c->lmadr, chip); - - tran = 0; - result = IIC_OK; - creg = 0; - - while (tran != cnt && (result == IIC_OK)) { - int bc,j; - - /* - * Control register = - * Normal transfer, 7-bits adressing, Transfer up to - * bc bytes, Normal start, Transfer is a sequence of transfers - */ - creg |= IIC_CNTL_PT; - - bc = (cnt - tran) > 4 ? 4 : cnt - tran; - creg |= (bc - 1) << 4; - /* if the real cmd type is write continue trans */ - if ((!cmd_type && (ptr == addr)) || ((tran + bc) != cnt)) - creg |= IIC_CNTL_CHT; - - /* last part of address, prepare for repeated start on read */ - if (cmd_type && (ptr == addr) && ((tran + bc) == cnt)) - creg |= IIC_CNTL_RPST; - - if (reading) { - creg |= IIC_CNTL_READ; - } else { - for(j = 0; j < bc; j++) { - /* Set buffer */ - out_8(&i2c->mdbuf, ptr[tran + j]); - } - } - out_8(&i2c->cntl, creg); - - /* - * Transfer is in progress - * we have to wait for upto 5 bytes of data - * 1 byte chip address+r/w bit then bc bytes - * of data. - * udelay(10) is 1 bit time at 100khz - * Doubled for slop. 20 is too small. - */ - i = 2 * 5 * 8; - do { - /* Get status */ - status = in_8(&i2c->sts); - udelay(10); - i--; - } while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR) && - (i > 0)); - - if (status & IIC_STS_ERR) { - result = IIC_NOK; - status = in_8(&i2c->extsts); - /* Lost arbitration? */ - if (status & IIC_EXTSTS_LA) - result = IIC_NOK_LA; - /* Incomplete transfer? */ - if (status & IIC_EXTSTS_ICT) - result = IIC_NOK_ICT; - /* Transfer aborted? */ - if (status & IIC_EXTSTS_XFRA) - result = IIC_NOK_XFRA; - /* Is bus free? - * If error happened during combined xfer - * IIC interface is usually stuck in some strange - * state without a valid stop condition. - * Brute, but working: generate stop, then soft reset. - */ - if ((status & IIC_EXTSTS_BCS_MASK) - != IIC_EXTSTS_BCS_FREE){ - u8 mdcntl = in_8(&i2c->mdcntl); - - /* Generate valid stop condition */ - out_8(&i2c->xtcntlss, IIC_XTCNTLSS_SRST); - out_8(&i2c->directcntl, IIC_DIRCNTL_SCC); - udelay(10); - out_8(&i2c->directcntl, - IIC_DIRCNTL_SCC | IIC_DIRCNTL_SDAC); - out_8(&i2c->xtcntlss, 0); - - ppc4xx_i2c_init(adap, (mdcntl & IIC_MDCNTL_FSM) - ? 400000 : 100000, 0); - } - } else if ( status & IIC_STS_PT) { - result = IIC_NOK_TOUT; - } - - /* Command is reading => get buffer */ - if ((reading) && (result == IIC_OK)) { - /* Are there data in buffer */ - if (status & IIC_STS_MDBS) { - /* - * even if we have data we have to wait 4OPB - * clocks for it to hit the front of the FIFO, - * after that we can just read. We should check - * XFCNT here and if the FIFO is full there is - * no need to wait. - */ - udelay(1); - for (j = 0; j < bc; j++) - ptr[tran + j] = in_8(&i2c->mdbuf); - } else - result = IIC_NOK_DATA; - } - creg = 0; - tran += bc; - if (ptr == addr && tran == cnt) { - ptr = data; - cnt = data_len; - tran = 0; - reading = cmd_type; - } - } - return result; -} - -static int ppc4xx_i2c_probe(struct i2c_adapter *adap, uchar chip) -{ - uchar buf[1]; - - buf[0] = 0; - - /* - * What is needed is to send the chip address and verify that the - * address was <ACK>ed (i.e. there was a chip at that address which - * drove the data line low). - */ - return (_i2c_transfer(adap, 1, chip << 1, 0, 0, buf, 1) != 0); -} - -static int ppc4xx_i2c_transfer(struct i2c_adapter *adap, uchar chip, uint addr, - int alen, uchar *buffer, int len, int read) -{ - uchar xaddr[4]; - int ret; - - if (alen > 4) { - printf("I2C: addr len %d not supported\n", alen); - return 1; - } - - if (alen > 0) { - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - } - - -#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones - * like Catalyst 24WC04/08/16 which has 9/10/11 bits of - * address and the extra bits end up in the "chip address" - * bit slots. This makes a 24WC08 (1Kbyte) chip look like - * four 256 byte chips. - * - * Note that we consider the length of the address field to - * still be one byte because the extra address bits are - * hidden in the chip address. - */ - if (alen > 0) - chip |= ((addr >> (alen * 8)) & - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); -#endif - ret = _i2c_transfer(adap, read, chip << 1, &xaddr[4 - alen], alen, - buffer, len); - if (ret) { - printf("I2C %s: failed %d\n", read ? "read" : "write", ret); - return 1; - } - - return 0; -} - -static int ppc4xx_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, - int alen, uchar *buffer, int len) -{ - return ppc4xx_i2c_transfer(adap, chip, addr, alen, buffer, len, 1); -} - -static int ppc4xx_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, - int alen, uchar *buffer, int len) -{ - return ppc4xx_i2c_transfer(adap, chip, addr, alen, buffer, len, 0); -} - -static unsigned int ppc4xx_i2c_set_bus_speed(struct i2c_adapter *adap, - unsigned int speed) -{ - if (speed != adap->speed) - return -1; - return speed; -} - -/* - * Register ppc4xx i2c adapters - */ -#ifdef CONFIG_SYS_I2C_PPC4XX_CH0 -U_BOOT_I2C_ADAP_COMPLETE(ppc4xx_0, ppc4xx_i2c_init, ppc4xx_i2c_probe, - ppc4xx_i2c_read, ppc4xx_i2c_write, - ppc4xx_i2c_set_bus_speed, - CONFIG_SYS_I2C_PPC4XX_SPEED_0, - CONFIG_SYS_I2C_PPC4XX_SLAVE_0, 0) -#endif -#ifdef CONFIG_SYS_I2C_PPC4XX_CH1 -U_BOOT_I2C_ADAP_COMPLETE(ppc4xx_1, ppc4xx_i2c_init, ppc4xx_i2c_probe, - ppc4xx_i2c_read, ppc4xx_i2c_write, - ppc4xx_i2c_set_bus_speed, - CONFIG_SYS_I2C_PPC4XX_SPEED_1, - CONFIG_SYS_I2C_PPC4XX_SLAVE_1, 1) -#endif diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c deleted file mode 100644 index e759339..0000000 --- a/drivers/net/4xx_enet.c +++ /dev/null @@ -1,2069 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0 IBM-pibs - */ -/*-----------------------------------------------------------------------------+ - * - * File Name: enetemac.c - * - * Function: Device driver for the ethernet EMAC3 macro on the 405GP. - * - * Author: Mark Wisner - * - * Change Activity- - * - * Date Description of Change BY - * --------- --------------------- --- - * 05-May-99 Created MKW - * 27-Jun-99 Clean up JWB - * 16-Jul-99 Added MAL error recovery and better IP packet handling MKW - * 29-Jul-99 Added Full duplex support MKW - * 06-Aug-99 Changed names for Mal CR reg MKW - * 23-Aug-99 Turned off SYE when running at 10Mbs MKW - * 24-Aug-99 Marked descriptor empty after call_xlc MKW - * 07-Sep-99 Set MAL RX buffer size reg to ENET_MAX_MTU_ALIGNED / 16 MCG - * to avoid chaining maximum sized packets. Push starting - * RX descriptor address up to the next cache line boundary. - * 16-Jan-00 Added support for booting with IP of 0x0 MKW - * 15-Mar-00 Updated enetInit() to enable broadcast addresses in the - * EMAC0_RXM register. JWB - * 12-Mar-01 anne-sophie.harnois@nextream.fr - * - Variables are compatible with those already defined in - * include/net.h - * - Receive buffer descriptor ring is used to send buffers - * to the user - * - Info print about send/received/handled packet number if - * INFO_405_ENET is set - * 17-Apr-01 stefan.roese@esd-electronics.com - * - MAL reset in "eth_halt" included - * - Enet speed and duplex output now in one line - * 08-May-01 stefan.roese@esd-electronics.com - * - MAL error handling added (eth_init called again) - * 13-Nov-01 stefan.roese@esd-electronics.com - * - Set IST bit in EMAC0_MR1 reg upon 100MBit or full duplex - * 04-Jan-02 stefan.roese@esd-electronics.com - * - Wait for PHY auto negotiation to complete added - * 06-Feb-02 stefan.roese@esd-electronics.com - * - Bug fixed in waiting for auto negotiation to complete - * 26-Feb-02 stefan.roese@esd-electronics.com - * - rx and tx buffer descriptors now allocated (no fixed address - * used anymore) - * 17-Jun-02 stefan.roese@esd-electronics.com - * - MAL error debug printf 'M' removed (rx de interrupt may - * occur upon many incoming packets with only 4 rx buffers). - *-----------------------------------------------------------------------------* - * 17-Nov-03 travis.sawyer@sandburst.com - * - ported from 405gp_enet.c to utilized upto 4 EMAC ports - * in the 440GX. This port should work with the 440GP - * (2 EMACs) also - * 15-Aug-05 sr@denx.de - * - merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c - now handling all 4xx cpu's. - *-----------------------------------------------------------------------------*/ - -#include <config.h> -#include <common.h> -#include <net.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include <asm/ppc4xx.h> -#include <asm/ppc4xx-emac.h> -#include <asm/ppc4xx-mal.h> -#include <miiphy.h> -#include <malloc.h> -#include <linux/compiler.h> - -#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) -#error "CONFIG_MII has to be defined!" -#endif - -#define EMAC_RESET_TIMEOUT 1000 /* 1000 ms reset timeout */ -#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* 5000 ms autonegotiate timeout */ - -/* Ethernet Transmit and Receive Buffers */ -/* AS.HARNOIS - * In the same way ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from - * PKTSIZE and PKTSIZE_ALIGN (include/net.h) - */ -#define ENET_MAX_MTU PKTSIZE -#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN - -/*-----------------------------------------------------------------------------+ - * Defines for MAL/EMAC interrupt conditions as reported in the UIC (Universal - * Interrupt Controller). - *-----------------------------------------------------------------------------*/ -#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev) * VECNUM_ETH1_OFFS)) - -#if defined(CONFIG_HAS_ETH3) -#if !defined(CONFIG_440GX) -#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)) || \ - UIC_MASK(ETH_IRQ_NUM(2)) || UIC_MASK(ETH_IRQ_NUM(3))) -#else -/* Unfortunately 440GX spreads EMAC interrupts on multiple UIC's */ -#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1))) -#define UIC_ETHxB (UIC_MASK(ETH_IRQ_NUM(2)) || UIC_MASK(ETH_IRQ_NUM(3))) -#endif /* !defined(CONFIG_440GX) */ -#elif defined(CONFIG_HAS_ETH2) -#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)) || \ - UIC_MASK(ETH_IRQ_NUM(2))) -#elif defined(CONFIG_HAS_ETH1) -#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1))) -#else -#define UIC_ETHx UIC_MASK(ETH_IRQ_NUM(0)) -#endif - -/* - * Define a default version for UIC_ETHxB for non 440GX so that we can - * use common code for all 4xx variants - */ -#if !defined(UIC_ETHxB) -#define UIC_ETHxB 0 -#endif - -#define UIC_MAL_SERR UIC_MASK(VECNUM_MAL_SERR) -#define UIC_MAL_TXDE UIC_MASK(VECNUM_MAL_TXDE) -#define UIC_MAL_RXDE UIC_MASK(VECNUM_MAL_RXDE) -#define UIC_MAL_TXEOB UIC_MASK(VECNUM_MAL_TXEOB) -#define UIC_MAL_RXEOB UIC_MASK(VECNUM_MAL_RXEOB) - -#define MAL_UIC_ERR (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE) -#define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR) - -/* - * We have 3 different interrupt types: - * - MAL interrupts indicating successful transfer - * - MAL error interrupts indicating MAL related errors - * - EMAC interrupts indicating EMAC related errors - * - * All those interrupts can be on different UIC's, but since - * now at least all interrupts from one type are on the same - * UIC. Only exception is 440GX where the EMAC interrupts are - * spread over two UIC's! - */ -#if defined(CONFIG_440GX) -#define UIC_BASE_MAL UIC1_DCR_BASE -#define UIC_BASE_MAL_ERR UIC2_DCR_BASE -#define UIC_BASE_EMAC UIC2_DCR_BASE -#define UIC_BASE_EMAC_B UIC3_DCR_BASE -#else -#define UIC_BASE_MAL (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_TXEOB) * 0x10)) -#define UIC_BASE_MAL_ERR (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_SERR) * 0x10)) -#define UIC_BASE_EMAC (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10)) -#define UIC_BASE_EMAC_B (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10)) -#endif - -#undef INFO_4XX_ENET - -#define BI_PHYMODE_NONE 0 -#define BI_PHYMODE_ZMII 1 -#define BI_PHYMODE_RGMII 2 -#define BI_PHYMODE_GMII 3 -#define BI_PHYMODE_RTBI 4 -#define BI_PHYMODE_TBI 5 -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_405EX) -#define BI_PHYMODE_SMII 6 -#define BI_PHYMODE_MII 7 -#if defined(CONFIG_460EX) || defined(CONFIG_460GT) -#define BI_PHYMODE_RMII 8 -#endif -#endif -#define BI_PHYMODE_SGMII 9 - -#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_405EX) -#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1)) -#endif - -#if defined(CONFIG_460EX) || defined(CONFIG_460GT) -#define SDR0_ETH_CFG_CLK_SEL_V(n) (0x01 << (8 + n)) -#endif - -#if defined(CONFIG_460EX) || defined(CONFIG_460GT) -#define MAL_RX_CHAN_MUL 8 /* 460EX/GT uses MAL channel 8 for EMAC1 */ -#else -#define MAL_RX_CHAN_MUL 1 -#endif - -/*--------------------------------------------------------------------+ - * Fixed PHY (PHY-less) support for Ethernet Ports. - *--------------------------------------------------------------------*/ - -/* - * Some boards do not have a PHY for each ethernet port. These ports - * are known as Fixed PHY (or PHY-less) ports. For such ports, set - * the appropriate CONFIG_PHY_ADDR equal to CONFIG_FIXED_PHY and - * then define CONFIG_SYS_FIXED_PHY_PORTS to define what the speed and - * duplex should be for these ports in the board configuration - * file. - * - * For Example: - * #define CONFIG_FIXED_PHY 0xFFFFFFFF - * - * #define CONFIG_PHY_ADDR CONFIG_FIXED_PHY - * #define CONFIG_PHY1_ADDR 1 - * #define CONFIG_PHY2_ADDR CONFIG_FIXED_PHY - * #define CONFIG_PHY3_ADDR 3 - * - * #define CONFIG_SYS_FIXED_PHY_PORT(devnum,speed,duplex) \ - * {devnum, speed, duplex}, - * - * #define CONFIG_SYS_FIXED_PHY_PORTS \ - * CONFIG_SYS_FIXED_PHY_PORT(0,1000,FULL) \ - * CONFIG_SYS_FIXED_PHY_PORT(2,100,HALF) - */ - -#ifndef CONFIG_FIXED_PHY -#define CONFIG_FIXED_PHY 0xFFFFFFFF /* Fixed PHY (PHY-less) */ -#endif - -#ifndef CONFIG_SYS_FIXED_PHY_PORTS -#define CONFIG_SYS_FIXED_PHY_PORTS /* default is an empty array */ -#endif - -struct fixed_phy_port { - unsigned int devnum; /* ethernet port */ - unsigned int speed; /* specified speed 10,100 or 1000 */ - unsigned int duplex; /* specified duplex FULL or HALF */ -}; - -static const struct fixed_phy_port fixed_phy_port[] = { - CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */ -}; - -/*-----------------------------------------------------------------------------+ - * Global variables. TX and RX descriptors and buffers. - *-----------------------------------------------------------------------------*/ - -/* - * Get count of EMAC devices (doesn't have to be the max. possible number - * supported by the cpu) - * - * CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the - * EMAC count is possible. As it is needed for the Kilauea/Haleakala - * 405EX/405EXr eval board, using the same binary. - */ -#if defined(CONFIG_BOARD_EMAC_COUNT) -#define LAST_EMAC_NUM board_emac_count() -#else /* CONFIG_BOARD_EMAC_COUNT */ -#if defined(CONFIG_HAS_ETH3) -#define LAST_EMAC_NUM 4 -#elif defined(CONFIG_HAS_ETH2) -#define LAST_EMAC_NUM 3 -#elif defined(CONFIG_HAS_ETH1) -#define LAST_EMAC_NUM 2 -#else -#define LAST_EMAC_NUM 1 -#endif -#endif /* CONFIG_BOARD_EMAC_COUNT */ - -/* normal boards start with EMAC0 */ -#if !defined(CONFIG_EMAC_NR_START) -#define CONFIG_EMAC_NR_START 0 -#endif - -#define MAL_RX_DESC_SIZE 2048 -#define MAL_TX_DESC_SIZE 2048 -#define MAL_ALLOC_SIZE (MAL_TX_DESC_SIZE + MAL_RX_DESC_SIZE) - -/*-----------------------------------------------------------------------------+ - * Prototypes and externals. - *-----------------------------------------------------------------------------*/ -static void enet_rcv (struct eth_device *dev, unsigned long malisr); - -int enetInt (struct eth_device *dev); -static void mal_err (struct eth_device *dev, unsigned long isr, - unsigned long uic, unsigned long maldef, - unsigned long mal_errr); -static void emac_err (struct eth_device *dev, unsigned long isr); - -extern int phy_setup_aneg (char *devname, unsigned char addr); -int emac4xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg); -int emac4xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg, - u16 value); - -int board_emac_count(void); - -static void emac_loopback_enable(EMAC_4XX_HW_PST hw_p) -{ -#if defined(CONFIG_440SPE) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_405EX) - u32 val; - - mfsdr(SDR0_MFR, val); - val |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum); - mtsdr(SDR0_MFR, val); -#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) - u32 val; - - mfsdr(SDR0_ETH_CFG, val); - val |= SDR0_ETH_CFG_CLK_SEL_V(hw_p->devnum); - mtsdr(SDR0_ETH_CFG, val); -#endif -} - -static void emac_loopback_disable(EMAC_4XX_HW_PST hw_p) -{ -#if defined(CONFIG_440SPE) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_405EX) - u32 val; - - mfsdr(SDR0_MFR, val); - val &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum); - mtsdr(SDR0_MFR, val); -#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) - u32 val; - - mfsdr(SDR0_ETH_CFG, val); - val &= ~SDR0_ETH_CFG_CLK_SEL_V(hw_p->devnum); - mtsdr(SDR0_ETH_CFG, val); -#endif -} - -/*-----------------------------------------------------------------------------+ -| ppc_4xx_eth_halt -| Disable MAL channel, and EMACn -+-----------------------------------------------------------------------------*/ -static void ppc_4xx_eth_halt (struct eth_device *dev) -{ - EMAC_4XX_HW_PST hw_p = dev->priv; - u32 val = 10000; - - out_be32((void *)EMAC0_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ - - /* 1st reset MAL channel */ - /* Note: writing a 0 to a channel has no effect */ -#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - mtdcr (MAL0_TXCARR, (MAL_CR_MMSR >> (hw_p->devnum * 2))); -#else - mtdcr (MAL0_TXCARR, (MAL_CR_MMSR >> hw_p->devnum)); -#endif - mtdcr (MAL0_RXCARR, (MAL_CR_MMSR >> hw_p->devnum)); - - /* wait for reset */ - while (mfdcr (MAL0_RXCASR) & (MAL_CR_MMSR >> hw_p->devnum)) { - udelay (1000); /* Delay 1 MS so as not to hammer the register */ - val--; - if (val == 0) - break; - } - - /* provide clocks for EMAC internal loopback */ - emac_loopback_enable(hw_p); - - /* EMAC RESET */ - out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_SRST); - - /* remove clocks for EMAC internal loopback */ - emac_loopback_disable(hw_p); - -#ifndef CONFIG_NETCONSOLE - hw_p->print_speed = 1; /* print speed message again next time */ -#endif - -#if defined(CONFIG_460EX) || defined(CONFIG_460GT) - /* don't bypass the TAHOE0/TAHOE1 cores for Linux */ - mfsdr(SDR0_ETH_CFG, val); - val &= ~(SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS); - mtsdr(SDR0_ETH_CFG, val); -#endif - - return; -} - -#if defined (CONFIG_440GX) -int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) -{ - unsigned long pfc1; - unsigned long zmiifer; - unsigned long rmiifer; - - mfsdr(SDR0_PFC1, pfc1); - pfc1 = SDR0_PFC1_EPS_DECODE(pfc1); - - zmiifer = 0; - rmiifer = 0; - - switch (pfc1) { - case 1: - zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); - zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1); - zmiifer |= ZMII_FER_RMII << ZMII_FER_V(2); - zmiifer |= ZMII_FER_RMII << ZMII_FER_V(3); - bis->bi_phymode[0] = BI_PHYMODE_ZMII; - bis->bi_phymode[1] = BI_PHYMODE_ZMII; - bis->bi_phymode[2] = BI_PHYMODE_ZMII; - bis->bi_phymode[3] = BI_PHYMODE_ZMII; - break; - case 2: - zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); - zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); - zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2); - zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3); - bis->bi_phymode[0] = BI_PHYMODE_ZMII; - bis->bi_phymode[1] = BI_PHYMODE_ZMII; - bis->bi_phymode[2] = BI_PHYMODE_ZMII; - bis->bi_phymode[3] = BI_PHYMODE_ZMII; - break; - case 3: - zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); - rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); - bis->bi_phymode[0] = BI_PHYMODE_ZMII; - bis->bi_phymode[1] = BI_PHYMODE_NONE; - bis->bi_phymode[2] = BI_PHYMODE_RGMII; - bis->bi_phymode[3] = BI_PHYMODE_NONE; - break; - case 4: - zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); - zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); - rmiifer |= RGMII_FER_RGMII << RGMII_FER_V (2); - rmiifer |= RGMII_FER_RGMII << RGMII_FER_V (3); - bis->bi_phymode[0] = BI_PHYMODE_ZMII; - bis->bi_phymode[1] = BI_PHYMODE_ZMII; - bis->bi_phymode[2] = BI_PHYMODE_RGMII; - bis->bi_phymode[3] = BI_PHYMODE_RGMII; - break; - case 5: - zmiifer |= ZMII_FER_SMII << ZMII_FER_V (0); - zmiifer |= ZMII_FER_SMII << ZMII_FER_V (1); - zmiifer |= ZMII_FER_SMII << ZMII_FER_V (2); - rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3); - bis->bi_phymode[0] = BI_PHYMODE_ZMII; - bis->bi_phymode[1] = BI_PHYMODE_ZMII; - bis->bi_phymode[2] = BI_PHYMODE_ZMII; - bis->bi_phymode[3] = BI_PHYMODE_RGMII; - break; - case 6: - zmiifer |= ZMII_FER_SMII << ZMII_FER_V (0); - zmiifer |= ZMII_FER_SMII << ZMII_FER_V (1); - rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); - bis->bi_phymode[0] = BI_PHYMODE_ZMII; - bis->bi_phymode[1] = BI_PHYMODE_ZMII; - bis->bi_phymode[2] = BI_PHYMODE_RGMII; - break; - case 0: - default: - zmiifer = ZMII_FER_MII << ZMII_FER_V(devnum); - rmiifer = 0x0; - bis->bi_phymode[0] = BI_PHYMODE_ZMII; - bis->bi_phymode[1] = BI_PHYMODE_ZMII; - bis->bi_phymode[2] = BI_PHYMODE_ZMII; - bis->bi_phymode[3] = BI_PHYMODE_ZMII; - break; - } - - /* Ensure we setup mdio for this devnum and ONLY this devnum */ - zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); - - out_be32((void *)ZMII0_FER, zmiifer); - out_be32((void *)RGMII_FER, rmiifer); - - return ((int)pfc1); -} -#endif /* CONFIG_440_GX */ - -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) -int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) -{ - unsigned long zmiifer=0x0; - unsigned long pfc1; - - mfsdr(SDR0_PFC1, pfc1); - pfc1 &= SDR0_PFC1_SELECT_MASK; - - switch (pfc1) { - case SDR0_PFC1_SELECT_CONFIG_2: - /* 1 x GMII port */ - out_be32((void *)ZMII0_FER, 0x00); - out_be32((void *)RGMII_FER, 0x00000037); - bis->bi_phymode[0] = BI_PHYMODE_GMII; - bis->bi_phymode[1] = BI_PHYMODE_NONE; - break; - case SDR0_PFC1_SELECT_CONFIG_4: - /* 2 x RGMII ports */ - out_be32((void *)ZMII0_FER, 0x00); - out_be32((void *)RGMII_FER, 0x00000055); - bis->bi_phymode[0] = BI_PHYMODE_RGMII; - bis->bi_phymode[1] = BI_PHYMODE_RGMII; - break; - case SDR0_PFC1_SELECT_CONFIG_6: - /* 2 x SMII ports */ - out_be32((void *)ZMII0_FER, - ((ZMII_FER_SMII) << ZMII_FER_V(0)) | - ((ZMII_FER_SMII) << ZMII_FER_V(1))); - out_be32((void *)RGMII_FER, 0x00000000); - bis->bi_phymode[0] = BI_PHYMODE_SMII; - bis->bi_phymode[1] = BI_PHYMODE_SMII; - break; - case SDR0_PFC1_SELECT_CONFIG_1_2: - /* only 1 x MII supported */ - out_be32((void *)ZMII0_FER, (ZMII_FER_MII) << ZMII_FER_V(0)); - out_be32((void *)RGMII_FER, 0x00000000); - bis->bi_phymode[0] = BI_PHYMODE_MII; - bis->bi_phymode[1] = BI_PHYMODE_NONE; - break; - default: - break; - } - - /* Ensure we setup mdio for this devnum and ONLY this devnum */ - zmiifer = in_be32((void *)ZMII0_FER); - zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); - out_be32((void *)ZMII0_FER, zmiifer); - - return ((int)0x0); -} -#endif /* CONFIG_440EPX */ - -#if defined(CONFIG_405EX) -int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) -{ - u32 rgmiifer = 0; - - /* - * The 405EX(r)'s RGMII bridge can operate in one of several - * modes, only one of which (2 x RGMII) allows the - * simultaneous use of both EMACs on the 405EX. - */ - - switch (CONFIG_EMAC_PHY_MODE) { - - case EMAC_PHY_MODE_NONE: - /* No ports */ - rgmiifer |= RGMII_FER_DIS << 0; - rgmiifer |= RGMII_FER_DIS << 4; - out_be32((void *)RGMII_FER, rgmiifer); - bis->bi_phymode[0] = BI_PHYMODE_NONE; - bis->bi_phymode[1] = BI_PHYMODE_NONE; - break; - case EMAC_PHY_MODE_NONE_RGMII: - /* 1 x RGMII port on channel 0 */ - rgmiifer |= RGMII_FER_RGMII << 0; - rgmiifer |= RGMII_FER_DIS << 4; - out_be32((void *)RGMII_FER, rgmiifer); - bis->bi_phymode[0] = BI_PHYMODE_RGMII; - bis->bi_phymode[1] = BI_PHYMODE_NONE; - break; - case EMAC_PHY_MODE_RGMII_NONE: - /* 1 x RGMII port on channel 1 */ - rgmiifer |= RGMII_FER_DIS << 0; - rgmiifer |= RGMII_FER_RGMII << 4; - out_be32((void *)RGMII_FER, rgmiifer); - bis->bi_phymode[0] = BI_PHYMODE_NONE; - bis->bi_phymode[1] = BI_PHYMODE_RGMII; - break; - case EMAC_PHY_MODE_RGMII_RGMII: - /* 2 x RGMII ports */ - rgmiifer |= RGMII_FER_RGMII << 0; - rgmiifer |= RGMII_FER_RGMII << 4; - out_be32((void *)RGMII_FER, rgmiifer); - bis->bi_phymode[0] = BI_PHYMODE_RGMII; - bis->bi_phymode[1] = BI_PHYMODE_RGMII; - break; - case EMAC_PHY_MODE_NONE_GMII: - /* 1 x GMII port on channel 0 */ - rgmiifer |= RGMII_FER_GMII << 0; - rgmiifer |= RGMII_FER_DIS << 4; - out_be32((void *)RGMII_FER, rgmiifer); - bis->bi_phymode[0] = BI_PHYMODE_GMII; - bis->bi_phymode[1] = BI_PHYMODE_NONE; - break; - case EMAC_PHY_MODE_NONE_MII: - /* 1 x MII port on channel 0 */ - rgmiifer |= RGMII_FER_MII << 0; - rgmiifer |= RGMII_FER_DIS << 4; - out_be32((void *)RGMII_FER, rgmiifer); - bis->bi_phymode[0] = BI_PHYMODE_MII; - bis->bi_phymode[1] = BI_PHYMODE_NONE; - break; - case EMAC_PHY_MODE_GMII_NONE: - /* 1 x GMII port on channel 1 */ - rgmiifer |= RGMII_FER_DIS << 0; - rgmiifer |= RGMII_FER_GMII << 4; - out_be32((void *)RGMII_FER, rgmiifer); - bis->bi_phymode[0] = BI_PHYMODE_NONE; - bis->bi_phymode[1] = BI_PHYMODE_GMII; - break; - case EMAC_PHY_MODE_MII_NONE: - /* 1 x MII port on channel 1 */ - rgmiifer |= RGMII_FER_DIS << 0; - rgmiifer |= RGMII_FER_MII << 4; - out_be32((void *)RGMII_FER, rgmiifer); - bis->bi_phymode[0] = BI_PHYMODE_NONE; - bis->bi_phymode[1] = BI_PHYMODE_MII; - break; - default: - break; - } - - /* Ensure we setup mdio for this devnum and ONLY this devnum */ - rgmiifer = in_be32((void *)RGMII_FER); - rgmiifer |= (1 << (19-devnum)); - out_be32((void *)RGMII_FER, rgmiifer); - - return ((int)0x0); -} -#endif /* CONFIG_405EX */ - -#if defined(CONFIG_460EX) || defined(CONFIG_460GT) -int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) -{ - u32 eth_cfg; - u32 zmiifer; /* ZMII0_FER reg. */ - u32 rmiifer; /* RGMII0_FER reg. Bridge 0 */ - u32 rmiifer1; /* RGMII0_FER reg. Bridge 1 */ - int mode; - - zmiifer = 0; - rmiifer = 0; - rmiifer1 = 0; - -#if defined(CONFIG_460EX) - mode = 9; - mfsdr(SDR0_ETH_CFG, eth_cfg); - if (((eth_cfg & SDR0_ETH_CFG_SGMII0_ENABLE) > 0) && - ((eth_cfg & SDR0_ETH_CFG_SGMII1_ENABLE) > 0)) - mode = 11; /* config SGMII */ -#else - mode = 10; - mfsdr(SDR0_ETH_CFG, eth_cfg); - if (((eth_cfg & SDR0_ETH_CFG_SGMII0_ENABLE) > 0) && - ((eth_cfg & SDR0_ETH_CFG_SGMII1_ENABLE) > 0) && - ((eth_cfg & SDR0_ETH_CFG_SGMII2_ENABLE) > 0)) - mode = 12; /* config SGMII */ -#endif - - /* TODO: - * NOTE: 460GT has 2 RGMII bridge cores: - * emac0 ------ RGMII0_BASE - * | - * emac1 -----+ - * - * emac2 ------ RGMII1_BASE - * | - * emac3 -----+ - * - * 460EX has 1 RGMII bridge core: - * and RGMII1_BASE is disabled - * emac0 ------ RGMII0_BASE - * | - * emac1 -----+ - */ - - /* - * Right now only 2*RGMII is supported. Please extend when needed. - * sr - 2008-02-19 - * Add SGMII support. - * vg - 2008-07-28 - */ - switch (mode) { - case 1: - /* 1 MII - 460EX */ - /* GMC0 EMAC4_0, ZMII Bridge */ - zmiifer |= ZMII_FER_MII << ZMII_FER_V(0); - bis->bi_phymode[0] = BI_PHYMODE_MII; - bis->bi_phymode[1] = BI_PHYMODE_NONE; - bis->bi_phymode[2] = BI_PHYMODE_NONE; - bis->bi_phymode[3] = BI_PHYMODE_NONE; - break; - case 2: - /* 2 MII - 460GT */ - /* GMC0 EMAC4_0, GMC1 EMAC4_2, ZMII Bridge */ - zmiifer |= ZMII_FER_MII << ZMII_FER_V(0); - zmiifer |= ZMII_FER_MII << ZMII_FER_V(2); - bis->bi_phymode[0] = BI_PHYMODE_MII; - bis->bi_phymode[1] = BI_PHYMODE_NONE; - bis->bi_phymode[2] = BI_PHYMODE_MII; - bis->bi_phymode[3] = BI_PHYMODE_NONE; - break; - case 3: - /* 2 RMII - 460EX */ - /* GMC0 EMAC4_0, GMC0 EMAC4_1, ZMII Bridge */ - zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); - zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1); - bis->bi_phymode[0] = BI_PHYMODE_RMII; - bis->bi_phymode[1] = BI_PHYMODE_RMII; - bis->bi_phymode[2] = BI_PHYMODE_NONE; - bis->bi_phymode[3] = BI_PHYMODE_NONE; - break; - case 4: - /* 4 RMII - 460GT */ - /* GMC0 EMAC4_0, GMC0 EMAC4_1, GMC1 EMAC4_2, GMC1, EMAC4_3 */ - /* ZMII Bridge */ - zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); - zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1); - zmiifer |= ZMII_FER_RMII << ZMII_FER_V(2); - zmiifer |= ZMII_FER_RMII << ZMII_FER_V(3); - bis->bi_phymode[0] = BI_PHYMODE_RMII; - bis->bi_phymode[1] = BI_PHYMODE_RMII; - bis->bi_phymode[2] = BI_PHYMODE_RMII; - bis->bi_phymode[3] = BI_PHYMODE_RMII; - break; - case 5: - /* 2 SMII - 460EX */ - /* GMC0 EMAC4_0, GMC0 EMAC4_1, ZMII Bridge */ - zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); - zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); - bis->bi_phymode[0] = BI_PHYMODE_SMII; - bis->bi_phymode[1] = BI_PHYMODE_SMII; - bis->bi_phymode[2] = BI_PHYMODE_NONE; - bis->bi_phymode[3] = BI_PHYMODE_NONE; - break; - case 6: - /* 4 SMII - 460GT */ - /* GMC0 EMAC4_0, GMC0 EMAC4_1, GMC0 EMAC4_3, GMC0 EMAC4_3 */ - /* ZMII Bridge */ - zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); - zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); - zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2); - zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3); - bis->bi_phymode[0] = BI_PHYMODE_SMII; - bis->bi_phymode[1] = BI_PHYMODE_SMII; - bis->bi_phymode[2] = BI_PHYMODE_SMII; - bis->bi_phymode[3] = BI_PHYMODE_SMII; - break; - case 7: - /* This is the default mode that we want for board bringup - Maple */ - /* 1 GMII - 460EX */ - /* GMC0 EMAC4_0, RGMII Bridge 0 */ - rmiifer |= RGMII_FER_MDIO(0); - - if (devnum == 0) { - rmiifer |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC0 */ - bis->bi_phymode[0] = BI_PHYMODE_GMII; - bis->bi_phymode[1] = BI_PHYMODE_NONE; - bis->bi_phymode[2] = BI_PHYMODE_NONE; - bis->bi_phymode[3] = BI_PHYMODE_NONE; - } else { - rmiifer |= RGMII_FER_GMII << RGMII_FER_V(3); /* CH1CFG - EMAC1 */ - bis->bi_phymode[0] = BI_PHYMODE_NONE; - bis->bi_phymode[1] = BI_PHYMODE_GMII; - bis->bi_phymode[2] = BI_PHYMODE_NONE; - bis->bi_phymode[3] = BI_PHYMODE_NONE; - } - break; - case 8: - /* 2 GMII - 460GT */ - /* GMC0 EMAC4_0, RGMII Bridge 0 */ - /* GMC1 EMAC4_2, RGMII Bridge 1 */ - rmiifer |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC0 */ - rmiifer1 |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC2 */ - rmiifer |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC0 */ - rmiifer1 |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC2 */ - - bis->bi_phymode[0] = BI_PHYMODE_GMII; - bis->bi_phymode[1] = BI_PHYMODE_NONE; - bis->bi_phymode[2] = BI_PHYMODE_GMII; - bis->bi_phymode[3] = BI_PHYMODE_NONE; - break; - case 9: - /* 2 RGMII - 460EX */ - /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ - rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); - rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3); - rmiifer |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC0 */ - - bis->bi_phymode[0] = BI_PHYMODE_RGMII; - bis->bi_phymode[1] = BI_PHYMODE_RGMII; - bis->bi_phymode[2] = BI_PHYMODE_NONE; - bis->bi_phymode[3] = BI_PHYMODE_NONE; - break; - case 10: - /* 4 RGMII - 460GT */ - /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ - /* GMC1 EMAC4_2, GMC1 EMAC4_3, RGMII Bridge 1 */ - rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); - rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3); - rmiifer1 |= RGMII_FER_RGMII << RGMII_FER_V(2); - rmiifer1 |= RGMII_FER_RGMII << RGMII_FER_V(3); - bis->bi_phymode[0] = BI_PHYMODE_RGMII; - bis->bi_phymode[1] = BI_PHYMODE_RGMII; - bis->bi_phymode[2] = BI_PHYMODE_RGMII; - bis->bi_phymode[3] = BI_PHYMODE_RGMII; - break; - case 11: - /* 2 SGMII - 460EX */ - bis->bi_phymode[0] = BI_PHYMODE_SGMII; - bis->bi_phymode[1] = BI_PHYMODE_SGMII; - bis->bi_phymode[2] = BI_PHYMODE_NONE; - bis->bi_phymode[3] = BI_PHYMODE_NONE; - break; - case 12: - /* 3 SGMII - 460GT */ - bis->bi_phymode[0] = BI_PHYMODE_SGMII; - bis->bi_phymode[1] = BI_PHYMODE_SGMII; - bis->bi_phymode[2] = BI_PHYMODE_SGMII; - bis->bi_phymode[3] = BI_PHYMODE_NONE; - break; - default: - break; - } - - /* Set EMAC for MDIO */ - mfsdr(SDR0_ETH_CFG, eth_cfg); - eth_cfg |= SDR0_ETH_CFG_MDIO_SEL_EMAC0; - mtsdr(SDR0_ETH_CFG, eth_cfg); - - out_be32((void *)RGMII_FER, rmiifer); -#if defined(CONFIG_460GT) - out_be32((void *)RGMII_FER + RGMII1_BASE_OFFSET, rmiifer1); -#endif - - /* bypass the TAHOE0/TAHOE1 cores for U-Boot */ - mfsdr(SDR0_ETH_CFG, eth_cfg); - eth_cfg |= (SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS); - mtsdr(SDR0_ETH_CFG, eth_cfg); - - return 0; -} -#endif /* CONFIG_460EX || CONFIG_460GT */ - -static inline void *malloc_aligned(u32 size, u32 align) -{ - return (void *)(((u32)malloc(size + align) + align - 1) & - ~(align - 1)); -} - -static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) -{ - int i; - unsigned long reg = 0; - unsigned long msr; - unsigned long speed; - unsigned long duplex; - unsigned long failsafe; - unsigned mode_reg; - unsigned short devnum; - unsigned short reg_short; -#if defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_405EX) - u32 opbfreq; - sys_info_t sysinfo; -#if defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_405EX) - __maybe_unused int ethgroup = -1; -#endif -#endif - u32 bd_cached; - u32 bd_uncached = 0; -#ifdef CONFIG_4xx_DCACHE - static u32 last_used_ea = 0; -#endif -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_405EX) - int rgmii_channel; -#endif - - EMAC_4XX_HW_PST hw_p = dev->priv; - - /* before doing anything, figure out if we have a MAC address */ - /* if not, bail */ - if (memcmp (dev->enetaddr, "\0\0\0\0\0\0", 6) == 0) { - printf("ERROR: ethaddr not set!\n"); - return -1; - } - -#if defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_405EX) - /* Need to get the OPB frequency so we can access the PHY */ - get_sys_info (&sysinfo); -#endif - - msr = mfmsr (); - mtmsr (msr & ~(MSR_EE)); /* disable interrupts */ - - devnum = hw_p->devnum; - -#ifdef INFO_4XX_ENET - /* AS.HARNOIS - * We should have : - * hw_p->stats.pkts_handled <= hw_p->stats.pkts_rx <= hw_p->stats.pkts_handled+PKTBUFSRX - * In the most cases hw_p->stats.pkts_handled = hw_p->stats.pkts_rx, but it - * is possible that new packets (without relationship with - * current transfer) have got the time to arrived before - * netloop calls eth_halt - */ - printf ("About preceding transfer (eth%d):\n" - "- Sent packet number %d\n" - "- Received packet number %d\n" - "- Handled packet number %d\n", - hw_p->devnum, - hw_p->stats.pkts_tx, - hw_p->stats.pkts_rx, hw_p->stats.pkts_handled); - - hw_p->stats.pkts_tx = 0; - hw_p->stats.pkts_rx = 0; - hw_p->stats.pkts_handled = 0; - hw_p->print_speed = 1; /* print speed message again next time */ -#endif - - hw_p->tx_err_index = 0; /* Transmit Error Index for tx_err_log */ - hw_p->rx_err_index = 0; /* Receive Error Index for rx_err_log */ - - hw_p->rx_slot = 0; /* MAL Receive Slot */ - hw_p->rx_i_index = 0; /* Receive Interrupt Queue Index */ - hw_p->rx_u_index = 0; /* Receive User Queue Index */ - - hw_p->tx_slot = 0; /* MAL Transmit Slot */ - hw_p->tx_i_index = 0; /* Transmit Interrupt Queue Index */ - hw_p->tx_u_index = 0; /* Transmit User Queue Index */ - -#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) - /* set RMII mode */ - /* NOTE: 440GX spec states that mode is mutually exclusive */ - /* NOTE: Therefore, disable all other EMACS, since we handle */ - /* NOTE: only one emac at a time */ - reg = 0; - out_be32((void *)ZMII0_FER, 0); - udelay (100); - -#if defined(CONFIG_440GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - out_be32((void *)ZMII0_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); -#elif defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) - ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); -#endif - - out_be32((void *)ZMII0_SSR, ZMII0_SSR_SP << ZMII0_SSR_V(devnum)); -#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ -#if defined(CONFIG_405EX) - ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); -#endif - - sync(); - - /* provide clocks for EMAC internal loopback */ - emac_loopback_enable(hw_p); - - /* EMAC RESET */ - out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_SRST); - - /* remove clocks for EMAC internal loopback */ - emac_loopback_disable(hw_p); - - failsafe = 1000; - while ((in_be32((void *)EMAC0_MR0 + hw_p->hw_addr) & (EMAC_MR0_SRST)) && failsafe) { - udelay (1000); - failsafe--; - } - if (failsafe <= 0) - printf("\nProblem resetting EMAC!\n"); - -#if defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_405EX) - /* Whack the M1 register */ - mode_reg = 0x0; - mode_reg &= ~0x00000038; - opbfreq = sysinfo.freqOPB / 1000000; - if (opbfreq <= 50); - else if (opbfreq <= 66) - mode_reg |= EMAC_MR1_OBCI_66; - else if (opbfreq <= 83) - mode_reg |= EMAC_MR1_OBCI_83; - else if (opbfreq <= 100) - mode_reg |= EMAC_MR1_OBCI_100; - else - mode_reg |= EMAC_MR1_OBCI_GT100; - - out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg); -#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ - -#if defined(CONFIG_GPCS_PHY_ADDR) || defined(CONFIG_GPCS_PHY1_ADDR) || \ - defined(CONFIG_GPCS_PHY2_ADDR) || defined(CONFIG_GPCS_PHY3_ADDR) - if (bis->bi_phymode[devnum] == BI_PHYMODE_SGMII) { - /* - * In SGMII mode, GPCS access is needed for - * communication with the internal SGMII SerDes. - */ - switch (devnum) { -#if defined(CONFIG_GPCS_PHY_ADDR) - case 0: - reg = CONFIG_GPCS_PHY_ADDR; - break; -#endif -#if defined(CONFIG_GPCS_PHY1_ADDR) - case 1: - reg = CONFIG_GPCS_PHY1_ADDR; - break; -#endif -#if defined(CONFIG_GPCS_PHY2_ADDR) - case 2: - reg = CONFIG_GPCS_PHY2_ADDR; - break; -#endif -#if defined(CONFIG_GPCS_PHY3_ADDR) - case 3: - reg = CONFIG_GPCS_PHY3_ADDR; - break; -#endif - } - - mode_reg = in_be32((void *)EMAC0_MR1 + hw_p->hw_addr); - mode_reg |= EMAC_MR1_MF_1000GPCS | EMAC_MR1_IPPA_SET(reg); - out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg); - - /* Configure GPCS interface to recommended setting for SGMII */ - miiphy_reset(dev->name, reg); - miiphy_write(dev->name, reg, 0x04, 0x8120); /* AsymPause, FDX */ - miiphy_write(dev->name, reg, 0x07, 0x2801); /* msg_pg, toggle */ - miiphy_write(dev->name, reg, 0x00, 0x0140); /* 1Gbps, FDX */ - } -#endif /* defined(CONFIG_GPCS_PHY_ADDR) */ - - /* wait for PHY to complete auto negotiation */ - reg_short = 0; - switch (devnum) { - case 0: - reg = CONFIG_PHY_ADDR; - break; -#if defined (CONFIG_PHY1_ADDR) - case 1: - reg = CONFIG_PHY1_ADDR; - break; -#endif -#if defined (CONFIG_PHY2_ADDR) - case 2: - reg = CONFIG_PHY2_ADDR; - break; -#endif -#if defined (CONFIG_PHY3_ADDR) - case 3: - reg = CONFIG_PHY3_ADDR; - break; -#endif - default: - reg = CONFIG_PHY_ADDR; - break; - } - - bis->bi_phynum[devnum] = reg; - - if (reg == CONFIG_FIXED_PHY) - goto get_speed; - -#if defined(CONFIG_PHY_RESET) - /* - * Reset the phy, only if its the first time through - * otherwise, just check the speeds & feeds - */ - if (hw_p->first_init == 0) { -#if defined(CONFIG_M88E1111_PHY) - miiphy_write (dev->name, reg, 0x14, 0x0ce3); - miiphy_write (dev->name, reg, 0x18, 0x4101); - miiphy_write (dev->name, reg, 0x09, 0x0e00); - miiphy_write (dev->name, reg, 0x04, 0x01e1); -#if defined(CONFIG_M88E1111_DISABLE_FIBER) - miiphy_read(dev->name, reg, 0x1b, ®_short); - reg_short |= 0x8000; - miiphy_write(dev->name, reg, 0x1b, reg_short); -#endif -#endif -#if defined(CONFIG_M88E1112_PHY) - if (bis->bi_phymode[devnum] == BI_PHYMODE_SGMII) { - /* - * Marvell 88E1112 PHY needs to have the SGMII MAC - * interace (page 2) properly configured to - * communicate with the 460EX/GT GPCS interface. - */ - - /* Set access to Page 2 */ - miiphy_write(dev->name, reg, 0x16, 0x0002); - - miiphy_write(dev->name, reg, 0x00, 0x0040); /* 1Gbps */ - miiphy_read(dev->name, reg, 0x1a, ®_short); - reg_short |= 0x8000; /* bypass Auto-Negotiation */ - miiphy_write(dev->name, reg, 0x1a, reg_short); - miiphy_reset(dev->name, reg); /* reset MAC interface */ - - /* Reset access to Page 0 */ - miiphy_write(dev->name, reg, 0x16, 0x0000); - } -#endif /* defined(CONFIG_M88E1112_PHY) */ - miiphy_reset (dev->name, reg); - -#if defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_405EX) - -#if defined(CONFIG_CIS8201_PHY) - /* - * Cicada 8201 PHY needs to have an extended register whacked - * for RGMII mode. - */ - if (((devnum == 2) || (devnum == 3)) && (4 == ethgroup)) { -#if defined(CONFIG_CIS8201_SHORT_ETCH) - miiphy_write (dev->name, reg, 23, 0x1300); -#else - miiphy_write (dev->name, reg, 23, 0x1000); -#endif - /* - * Vitesse VSC8201/Cicada CIS8201 errata: - * Interoperability problem with Intel 82547EI phys - * This work around (provided by Vitesse) changes - * the default timer convergence from 8ms to 12ms - */ - miiphy_write (dev->name, reg, 0x1f, 0x2a30); - miiphy_write (dev->name, reg, 0x08, 0x0200); - miiphy_write (dev->name, reg, 0x1f, 0x52b5); - miiphy_write (dev->name, reg, 0x02, 0x0004); - miiphy_write (dev->name, reg, 0x01, 0x0671); - miiphy_write (dev->name, reg, 0x00, 0x8fae); - miiphy_write (dev->name, reg, 0x1f, 0x2a30); - miiphy_write (dev->name, reg, 0x08, 0x0000); - miiphy_write (dev->name, reg, 0x1f, 0x0000); - /* end Vitesse/Cicada errata */ - } -#endif /* defined(CONFIG_CIS8201_PHY) */ - -#if defined(CONFIG_ET1011C_PHY) - /* - * Agere ET1011c PHY needs to have an extended register whacked - * for RGMII mode. - */ - if (((devnum == 2) || (devnum ==3)) && (4 == ethgroup)) { - miiphy_read (dev->name, reg, 0x16, ®_short); - reg_short &= ~(0x7); - reg_short |= 0x6; /* RGMII DLL Delay*/ - miiphy_write (dev->name, reg, 0x16, reg_short); - - miiphy_read (dev->name, reg, 0x17, ®_short); - reg_short &= ~(0x40); - miiphy_write (dev->name, reg, 0x17, reg_short); - - miiphy_write(dev->name, reg, 0x1c, 0x74f0); - } -#endif /* defined(CONFIG_ET1011C_PHY) */ - -#endif /* defined(CONFIG_440GX) ... */ - /* Start/Restart autonegotiation */ - phy_setup_aneg (dev->name, reg); - udelay (1000); - } -#endif /* defined(CONFIG_PHY_RESET) */ - - miiphy_read (dev->name, reg, MII_BMSR, ®_short); - - /* - * Wait if PHY is capable of autonegotiation and autonegotiation is not complete - */ - if ((reg_short & BMSR_ANEGCAPABLE) - && !(reg_short & BMSR_ANEGCOMPLETE)) { - puts ("Waiting for PHY auto negotiation to complete"); - i = 0; - while (!(reg_short & BMSR_ANEGCOMPLETE)) { - /* - * Timeout reached ? - */ - if (i > PHY_AUTONEGOTIATE_TIMEOUT) { - puts (" TIMEOUT !\n"); - break; - } - - if ((i++ % 1000) == 0) { - putc ('.'); - } - udelay (1000); /* 1 ms */ - miiphy_read (dev->name, reg, MII_BMSR, ®_short); - } - puts (" done\n"); - udelay (500000); /* another 500 ms (results in faster booting) */ - } - -get_speed: - if (reg == CONFIG_FIXED_PHY) { - for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) { - if (devnum == fixed_phy_port[i].devnum) { - speed = fixed_phy_port[i].speed; - duplex = fixed_phy_port[i].duplex; - break; - } - } - - if (i == ARRAY_SIZE(fixed_phy_port)) { - printf("ERROR: PHY (%s) not configured correctly!\n", - dev->name); - return -1; - } - } else { - speed = miiphy_speed(dev->name, reg); - duplex = miiphy_duplex(dev->name, reg); - } - - if (hw_p->print_speed) { - hw_p->print_speed = 0; - printf ("ENET Speed is %d Mbps - %s duplex connection (EMAC%d)\n", - (int) speed, (duplex == HALF) ? "HALF" : "FULL", - hw_p->devnum); - } - -#if defined(CONFIG_440) && \ - !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \ - !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \ - !defined(CONFIG_460EX) && !defined(CONFIG_460GT) -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) - mfsdr(SDR0_MFR, reg); - if (speed == 100) { - reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M; - } else { - reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M; - } - mtsdr(SDR0_MFR, reg); -#endif - - /* Set ZMII/RGMII speed according to the phy link speed */ - reg = in_be32((void *)ZMII0_SSR); - if ( (speed == 100) || (speed == 1000) ) - out_be32((void *)ZMII0_SSR, reg | (ZMII0_SSR_SP << ZMII0_SSR_V (devnum))); - else - out_be32((void *)ZMII0_SSR, reg & (~(ZMII0_SSR_SP << ZMII0_SSR_V (devnum)))); - - if ((devnum == 2) || (devnum == 3)) { - if (speed == 1000) - reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum)); - else if (speed == 100) - reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum)); - else if (speed == 10) - reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum)); - else { - printf("Error in RGMII Speed\n"); - return -1; - } - out_be32((void *)RGMII_SSR, reg); - } -#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ - -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_405EX) - if (devnum >= 2) - rgmii_channel = devnum - 2; - else - rgmii_channel = devnum; - - if (speed == 1000) - reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V(rgmii_channel)); - else if (speed == 100) - reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V(rgmii_channel)); - else if (speed == 10) - reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V(rgmii_channel)); - else { - printf("Error in RGMII Speed\n"); - return -1; - } - out_be32((void *)RGMII_SSR, reg); -#if defined(CONFIG_460GT) - if ((devnum == 2) || (devnum == 3)) - out_be32((void *)RGMII_SSR + RGMII1_BASE_OFFSET, reg); -#endif -#endif - - /* set the Mal configuration reg */ -#if defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_405EX) - mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | - MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000); -#else - mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); - /* Errata 1.12: MAL_1 -- Disable MAL bursting */ - if (get_pvr() == PVR_440GP_RB) { - mtdcr (MAL0_CFG, mfdcr(MAL0_CFG) & ~MAL_CR_PLBB); - } -#endif - - /* - * Malloc MAL buffer desciptors, make sure they are - * aligned on cache line boundary size - * (401/403/IOP480 = 16, 405 = 32) - * and doesn't cross cache block boundaries. - */ - if (hw_p->first_init == 0) { - debug("*** Allocating descriptor memory ***\n"); - - bd_cached = (u32)malloc_aligned(MAL_ALLOC_SIZE, 4096); - if (!bd_cached) { - printf("%s: Error allocating MAL descriptor buffers!\n", __func__); - return -1; - } - -#ifdef CONFIG_4xx_DCACHE - flush_dcache_range(bd_cached, bd_cached + MAL_ALLOC_SIZE); - if (!last_used_ea) -#if defined(CONFIG_SYS_MEM_TOP_HIDE) - bd_uncached = bis->bi_memsize + CONFIG_SYS_MEM_TOP_HIDE; -#else - bd_uncached = bis->bi_memsize; -#endif - else - bd_uncached = last_used_ea + MAL_ALLOC_SIZE; - - last_used_ea = bd_uncached; - program_tlb(bd_cached, bd_uncached, MAL_ALLOC_SIZE, - TLB_WORD2_I_ENABLE); -#else - bd_uncached = bd_cached; -#endif - hw_p->tx_phys = bd_cached; - hw_p->rx_phys = bd_cached + MAL_TX_DESC_SIZE; - hw_p->tx = (mal_desc_t *)(bd_uncached); - hw_p->rx = (mal_desc_t *)(bd_uncached + MAL_TX_DESC_SIZE); - debug("hw_p->tx=%p, hw_p->rx=%p\n", hw_p->tx, hw_p->rx); - } - - for (i = 0; i < NUM_TX_BUFF; i++) { - hw_p->tx[i].ctrl = 0; - hw_p->tx[i].data_len = 0; - if (hw_p->first_init == 0) - hw_p->txbuf_ptr = malloc_aligned(MAL_ALLOC_SIZE, - L1_CACHE_BYTES); - hw_p->tx[i].data_ptr = hw_p->txbuf_ptr; - if ((NUM_TX_BUFF - 1) == i) - hw_p->tx[i].ctrl |= MAL_TX_CTRL_WRAP; - hw_p->tx_run[i] = -1; - debug("TX_BUFF %d @ 0x%08x\n", i, (u32)hw_p->tx[i].data_ptr); - } - - for (i = 0; i < NUM_RX_BUFF; i++) { - hw_p->rx[i].ctrl = 0; - hw_p->rx[i].data_len = 0; - hw_p->rx[i].data_ptr = (char *)net_rx_packets[i]; - if ((NUM_RX_BUFF - 1) == i) - hw_p->rx[i].ctrl |= MAL_RX_CTRL_WRAP; - hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR; - hw_p->rx_ready[i] = -1; - debug("RX_BUFF %d @ 0x%08x\n", i, (u32)hw_p->rx[i].data_ptr); - } - - reg = 0x00000000; - - reg |= dev->enetaddr[0]; /* set high address */ - reg = reg << 8; - reg |= dev->enetaddr[1]; - - out_be32((void *)EMAC0_IAH + hw_p->hw_addr, reg); - - reg = 0x00000000; - reg |= dev->enetaddr[2]; /* set low address */ - reg = reg << 8; - reg |= dev->enetaddr[3]; - reg = reg << 8; - reg |= dev->enetaddr[4]; - reg = reg << 8; - reg |= dev->enetaddr[5]; - - out_be32((void *)EMAC0_IAL + hw_p->hw_addr, reg); - - switch (devnum) { - case 1: - /* setup MAL tx & rx channel pointers */ -#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR) - mtdcr (MAL0_TXCTP2R, hw_p->tx_phys); -#else - mtdcr (MAL0_TXCTP1R, hw_p->tx_phys); -#endif -#if defined(CONFIG_440) - mtdcr (MAL0_TXBADDR, 0x0); - mtdcr (MAL0_RXBADDR, 0x0); -#endif - -#if defined(CONFIG_460EX) || defined(CONFIG_460GT) - mtdcr (MAL0_RXCTP8R, hw_p->rx_phys); - /* set RX buffer size */ - mtdcr (MAL0_RCBS8, ENET_MAX_MTU_ALIGNED / 16); -#else - mtdcr (MAL0_RXCTP1R, hw_p->rx_phys); - /* set RX buffer size */ - mtdcr (MAL0_RCBS1, ENET_MAX_MTU_ALIGNED / 16); -#endif - break; -#if defined (CONFIG_440GX) - case 2: - /* setup MAL tx & rx channel pointers */ - mtdcr (MAL0_TXBADDR, 0x0); - mtdcr (MAL0_RXBADDR, 0x0); - mtdcr (MAL0_TXCTP2R, hw_p->tx_phys); - mtdcr (MAL0_RXCTP2R, hw_p->rx_phys); - /* set RX buffer size */ - mtdcr (MAL0_RCBS2, ENET_MAX_MTU_ALIGNED / 16); - break; - case 3: - /* setup MAL tx & rx channel pointers */ - mtdcr (MAL0_TXBADDR, 0x0); - mtdcr (MAL0_TXCTP3R, hw_p->tx_phys); - mtdcr (MAL0_RXBADDR, 0x0); - mtdcr (MAL0_RXCTP3R, hw_p->rx_phys); - /* set RX buffer size */ - mtdcr (MAL0_RCBS3, ENET_MAX_MTU_ALIGNED / 16); - break; -#endif /* CONFIG_440GX */ -#if defined (CONFIG_460GT) - case 2: - /* setup MAL tx & rx channel pointers */ - mtdcr (MAL0_TXBADDR, 0x0); - mtdcr (MAL0_RXBADDR, 0x0); - mtdcr (MAL0_TXCTP2R, hw_p->tx_phys); - mtdcr (MAL0_RXCTP16R, hw_p->rx_phys); - /* set RX buffer size */ - mtdcr (MAL0_RCBS16, ENET_MAX_MTU_ALIGNED / 16); - break; - case 3: - /* setup MAL tx & rx channel pointers */ - mtdcr (MAL0_TXBADDR, 0x0); - mtdcr (MAL0_RXBADDR, 0x0); - mtdcr (MAL0_TXCTP3R, hw_p->tx_phys); - mtdcr (MAL0_RXCTP24R, hw_p->rx_phys); - /* set RX buffer size */ - mtdcr (MAL0_RCBS24, ENET_MAX_MTU_ALIGNED / 16); - break; -#endif /* CONFIG_460GT */ - case 0: - default: - /* setup MAL tx & rx channel pointers */ -#if defined(CONFIG_440) - mtdcr (MAL0_TXBADDR, 0x0); - mtdcr (MAL0_RXBADDR, 0x0); -#endif - mtdcr (MAL0_TXCTP0R, hw_p->tx_phys); - mtdcr (MAL0_RXCTP0R, hw_p->rx_phys); - /* set RX buffer size */ - mtdcr (MAL0_RCBS0, ENET_MAX_MTU_ALIGNED / 16); - break; - } - - /* Enable MAL transmit and receive channels */ -#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> (hw_p->devnum*2))); -#else - mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> hw_p->devnum)); -#endif - mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> hw_p->devnum)); - - /* set transmit enable & receive enable */ - out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_TXE | EMAC_MR0_RXE); - - mode_reg = in_be32((void *)EMAC0_MR1 + hw_p->hw_addr); - - /* set rx-/tx-fifo size */ - mode_reg = (mode_reg & ~EMAC_MR1_FIFO_MASK) | EMAC_MR1_FIFO_SIZE; - - /* set speed */ - if (speed == _1000BASET) { -#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) - unsigned long pfc1; - - mfsdr (SDR0_PFC1, pfc1); - pfc1 |= SDR0_PFC1_EM_1000; - mtsdr (SDR0_PFC1, pfc1); -#endif - mode_reg = mode_reg | EMAC_MR1_MF_1000MBPS | EMAC_MR1_IST; - } else if (speed == _100BASET) - mode_reg = mode_reg | EMAC_MR1_MF_100MBPS | EMAC_MR1_IST; - else - mode_reg = mode_reg & ~0x00C00000; /* 10 MBPS */ - if (duplex == FULL) - mode_reg = mode_reg | 0x80000000 | EMAC_MR1_IST; - - out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg); - - /* Enable broadcast and indvidual address */ - /* TBS: enabling runts as some misbehaved nics will send runts */ - out_be32((void *)EMAC0_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE); - - /* we probably need to set the tx mode1 reg? maybe at tx time */ - - /* set transmit request threshold register */ - out_be32((void *)EMAC0_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */ - - /* set receive low/high water mark register */ -#if defined(CONFIG_440) - /* 440s has a 64 byte burst length */ - out_be32((void *)EMAC0_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000); -#else - /* 405s have a 16 byte burst length */ - out_be32((void *)EMAC0_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000); -#endif /* defined(CONFIG_440) */ - out_be32((void *)EMAC0_TMR1 + hw_p->hw_addr, 0xf8640000); - - /* Set fifo limit entry in tx mode 0 */ - out_be32((void *)EMAC0_TMR0 + hw_p->hw_addr, 0x00000003); - /* Frame gap set */ - out_be32((void *)EMAC0_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008); - - /* Set EMAC IER */ - hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE; - if (speed == _100BASET) - hw_p->emac_ier = hw_p->emac_ier | EMAC_ISR_SYE; - - out_be32((void *)EMAC0_ISR + hw_p->hw_addr, 0xffffffff); /* clear pending interrupts */ - out_be32((void *)EMAC0_IER + hw_p->hw_addr, hw_p->emac_ier); - - if (hw_p->first_init == 0) { - /* - * Connect interrupt service routines - */ - irq_install_handler(ETH_IRQ_NUM(hw_p->devnum), - (interrupt_handler_t *) enetInt, dev); - } - - mtmsr (msr); /* enable interrupts again */ - - hw_p->bis = bis; - hw_p->first_init = 1; - - return 0; -} - - -static int ppc_4xx_eth_send(struct eth_device *dev, void *ptr, int len) -{ - struct enet_frame *ef_ptr; - ulong time_start, time_now; - unsigned long temp_txm0; - EMAC_4XX_HW_PST hw_p = dev->priv; - - ef_ptr = (struct enet_frame *) ptr; - - /*-----------------------------------------------------------------------+ - * Copy in our address into the frame. - *-----------------------------------------------------------------------*/ - (void) memcpy (ef_ptr->source_addr, dev->enetaddr, ENET_ADDR_LENGTH); - - /*-----------------------------------------------------------------------+ - * If frame is too long or too short, modify length. - *-----------------------------------------------------------------------*/ - /* TBS: where does the fragment go???? */ - if (len > ENET_MAX_MTU) - len = ENET_MAX_MTU; - - /* memcpy ((void *) &tx_buff[tx_slot], (const void *) ptr, len); */ - memcpy ((void *) hw_p->txbuf_ptr, (const void *) ptr, len); - flush_dcache_range((u32)hw_p->txbuf_ptr, (u32)hw_p->txbuf_ptr + len); - - /*-----------------------------------------------------------------------+ - * set TX Buffer busy, and send it - *-----------------------------------------------------------------------*/ - hw_p->tx[hw_p->tx_slot].ctrl = (MAL_TX_CTRL_LAST | - EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP) & - ~(EMAC_TX_CTRL_ISA | EMAC_TX_CTRL_RSA); - if ((NUM_TX_BUFF - 1) == hw_p->tx_slot) - hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_WRAP; - - hw_p->tx[hw_p->tx_slot].data_len = (short) len; - hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_READY; - - sync(); - - out_be32((void *)EMAC0_TMR0 + hw_p->hw_addr, - in_be32((void *)EMAC0_TMR0 + hw_p->hw_addr) | EMAC_TMR0_GNP0); -#ifdef INFO_4XX_ENET - hw_p->stats.pkts_tx++; -#endif - - /*-----------------------------------------------------------------------+ - * poll unitl the packet is sent and then make sure it is OK - *-----------------------------------------------------------------------*/ - time_start = get_timer (0); - while (1) { - temp_txm0 = in_be32((void *)EMAC0_TMR0 + hw_p->hw_addr); - /* loop until either TINT turns on or 3 seconds elapse */ - if ((temp_txm0 & EMAC_TMR0_GNP0) != 0) { - /* transmit is done, so now check for errors - * If there is an error, an interrupt should - * happen when we return - */ - time_now = get_timer (0); - if ((time_now - time_start) > 3000) { - return (-1); - } - } else { - return (len); - } - } -} - -int enetInt (struct eth_device *dev) -{ - int serviced; - int rc = -1; /* default to not us */ - u32 mal_isr; - u32 emac_isr = 0; - u32 mal_eob; - u32 uic_mal; - u32 uic_mal_err; - u32 uic_emac; - u32 uic_emac_b; - EMAC_4XX_HW_PST hw_p; - - /* - * Because the mal is generic, we need to get the current - * eth device - */ - dev = eth_get_dev(); - - hw_p = dev->priv; - - /* enter loop that stays in interrupt code until nothing to service */ - do { - serviced = 0; - - uic_mal = mfdcr(UIC_BASE_MAL + UIC_MSR); - uic_mal_err = mfdcr(UIC_BASE_MAL_ERR + UIC_MSR); - uic_emac = mfdcr(UIC_BASE_EMAC + UIC_MSR); - uic_emac_b = mfdcr(UIC_BASE_EMAC_B + UIC_MSR); - - if (!(uic_mal & (UIC_MAL_RXEOB | UIC_MAL_TXEOB)) - && !(uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)) - && !(uic_emac & UIC_ETHx) && !(uic_emac_b & UIC_ETHxB)) { - /* not for us */ - return (rc); - } - - /* get and clear controller status interrupts */ - /* look at MAL and EMAC error interrupts */ - if (uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)) { - /* we have a MAL error interrupt */ - mal_isr = mfdcr(MAL0_ESR); - mal_err(dev, mal_isr, uic_mal_err, - MAL_UIC_DEF, MAL_UIC_ERR); - - /* clear MAL error interrupt status bits */ - mtdcr(UIC_BASE_MAL_ERR + UIC_SR, - UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE); - - return -1; - } - - /* look for EMAC errors */ - if ((uic_emac & UIC_ETHx) || (uic_emac_b & UIC_ETHxB)) { - emac_isr = in_be32((void *)EMAC0_ISR + hw_p->hw_addr); - emac_err(dev, emac_isr); - - /* clear EMAC error interrupt status bits */ - mtdcr(UIC_BASE_EMAC + UIC_SR, UIC_ETHx); - mtdcr(UIC_BASE_EMAC_B + UIC_SR, UIC_ETHxB); - - return -1; - } - - /* handle MAX TX EOB interrupt from a tx */ - if (uic_mal & UIC_MAL_TXEOB) { - /* clear MAL interrupt status bits */ - mal_eob = mfdcr(MAL0_TXEOBISR); - mtdcr(MAL0_TXEOBISR, mal_eob); - mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_TXEOB); - - /* indicate that we serviced an interrupt */ - serviced = 1; - rc = 0; - } - - /* handle MAL RX EOB interrupt from a receive */ - /* check for EOB on valid channels */ - if (uic_mal & UIC_MAL_RXEOB) { - mal_eob = mfdcr(MAL0_RXEOBISR); - if (mal_eob & - (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL))) { - /* push packet to upper layer */ - enet_rcv(dev, emac_isr); - - /* clear MAL interrupt status bits */ - mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_RXEOB); - - /* indicate that we serviced an interrupt */ - serviced = 1; - rc = 0; - } - } -#if defined(CONFIG_405EZ) - /* - * On 405EZ the RX-/TX-interrupts are coalesced into - * one IRQ bit in the UIC. We need to acknowledge the - * RX-/TX-interrupts in the SDR0_ICINTSTAT reg as well. - */ - mtsdr(SDR0_ICINTSTAT, - SDR_ICRX_STAT | SDR_ICTX0_STAT | SDR_ICTX1_STAT); -#endif /* defined(CONFIG_405EZ) */ - } while (serviced); - - return (rc); -} - -/*-----------------------------------------------------------------------------+ - * MAL Error Routine - *-----------------------------------------------------------------------------*/ -static void mal_err (struct eth_device *dev, unsigned long isr, - unsigned long uic, unsigned long maldef, - unsigned long mal_errr) -{ - mtdcr (MAL0_ESR, isr); /* clear interrupt */ - - /* clear DE interrupt */ - mtdcr (MAL0_TXDEIR, 0xC0000000); - mtdcr (MAL0_RXDEIR, 0x80000000); - -#ifdef INFO_4XX_ENET - printf("\nMAL error occurred.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx\n", - isr, uic, maldef, mal_errr); -#endif - - eth_init(); /* start again... */ -} - -/*-----------------------------------------------------------------------------+ - * EMAC Error Routine - *-----------------------------------------------------------------------------*/ -static void emac_err (struct eth_device *dev, unsigned long isr) -{ - EMAC_4XX_HW_PST hw_p = dev->priv; - - printf ("EMAC%d error occurred.... ISR = %lx\n", hw_p->devnum, isr); - out_be32((void *)EMAC0_ISR + hw_p->hw_addr, isr); -} - -/*-----------------------------------------------------------------------------+ - * enet_rcv() handles the ethernet receive data - *-----------------------------------------------------------------------------*/ -static void enet_rcv (struct eth_device *dev, unsigned long malisr) -{ - unsigned long data_len; - unsigned long rx_eob_isr; - EMAC_4XX_HW_PST hw_p = dev->priv; - - int handled = 0; - int i; - int loop_count = 0; - - rx_eob_isr = mfdcr (MAL0_RXEOBISR); - if ((0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL)) & rx_eob_isr) { - /* clear EOB */ - mtdcr (MAL0_RXEOBISR, rx_eob_isr); - - /* EMAC RX done */ - while (1) { /* do all */ - i = hw_p->rx_slot; - - if ((MAL_RX_CTRL_EMPTY & hw_p->rx[i].ctrl) - || (loop_count >= NUM_RX_BUFF)) - break; - - loop_count++; - handled++; - data_len = (unsigned long) hw_p->rx[i].data_len & 0x0fff; /* Get len */ - if (data_len) { - if (data_len > ENET_MAX_MTU) /* Check len */ - data_len = 0; - else { - if (EMAC_RX_ERRORS & hw_p->rx[i].ctrl) { /* Check Errors */ - data_len = 0; - hw_p->stats.rx_err_log[hw_p-> - rx_err_index] - = hw_p->rx[i].ctrl; - hw_p->rx_err_index++; - if (hw_p->rx_err_index == - MAX_ERR_LOG) - hw_p->rx_err_index = - 0; - } /* emac_erros */ - } /* data_len < max mtu */ - } /* if data_len */ - if (!data_len) { /* no data */ - hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY; /* Free Recv Buffer */ - - hw_p->stats.data_len_err++; /* Error at Rx */ - } - - /* !data_len */ - /* AS.HARNOIS */ - /* Check if user has already eaten buffer */ - /* if not => ERROR */ - else if (hw_p->rx_ready[hw_p->rx_i_index] != -1) { - if (hw_p->is_receiving) - printf ("ERROR : Receive buffers are full!\n"); - break; - } else { - hw_p->stats.rx_frames++; - hw_p->stats.rx += data_len; -#ifdef INFO_4XX_ENET - hw_p->stats.pkts_rx++; -#endif - /* AS.HARNOIS - * use ring buffer - */ - hw_p->rx_ready[hw_p->rx_i_index] = i; - hw_p->rx_i_index++; - if (NUM_RX_BUFF == hw_p->rx_i_index) - hw_p->rx_i_index = 0; - - hw_p->rx_slot++; - if (NUM_RX_BUFF == hw_p->rx_slot) - hw_p->rx_slot = 0; - - /* AS.HARNOIS - * free receive buffer only when - * buffer has been handled (eth_rx) - rx[i].ctrl |= MAL_RX_CTRL_EMPTY; - */ - } /* if data_len */ - } /* while */ - } /* if EMACK_RXCHL */ -} - - -static int ppc_4xx_eth_rx (struct eth_device *dev) -{ - int length; - int user_index; - unsigned long msr; - EMAC_4XX_HW_PST hw_p = dev->priv; - - hw_p->is_receiving = 1; /* tell driver */ - - for (;;) { - /* AS.HARNOIS - * use ring buffer and - * get index from rx buffer desciptor queue - */ - user_index = hw_p->rx_ready[hw_p->rx_u_index]; - if (user_index == -1) { - length = -1; - break; /* nothing received - leave for() loop */ - } - - msr = mfmsr (); - mtmsr (msr & ~(MSR_EE)); - - length = hw_p->rx[user_index].data_len & 0x0fff; - - /* - * Pass the packet up to the protocol layers. - * net_process_received_packet(net_rx_packets[rxIdx], - * length - 4); - * net_process_received_packet(net_rx_packets[i], length); - */ - invalidate_dcache_range((u32)hw_p->rx[user_index].data_ptr, - (u32)hw_p->rx[user_index].data_ptr + - length - 4); - net_process_received_packet(net_rx_packets[user_index], - length - 4); - /* Free Recv Buffer */ - hw_p->rx[user_index].ctrl |= MAL_RX_CTRL_EMPTY; - /* Free rx buffer descriptor queue */ - hw_p->rx_ready[hw_p->rx_u_index] = -1; - hw_p->rx_u_index++; - if (NUM_RX_BUFF == hw_p->rx_u_index) - hw_p->rx_u_index = 0; - -#ifdef INFO_4XX_ENET - hw_p->stats.pkts_handled++; -#endif - - mtmsr (msr); /* Enable IRQ's */ - } - - hw_p->is_receiving = 0; /* tell driver */ - - return length; -} - -int ppc_4xx_eth_initialize (bd_t * bis) -{ - static int virgin = 0; - struct eth_device *dev; - int eth_num = 0; - EMAC_4XX_HW_PST hw = NULL; - u8 ethaddr[4 + CONFIG_EMAC_NR_START][6]; - u32 hw_addr[4]; - u32 mal_ier; - -#if defined(CONFIG_440GX) - unsigned long pfc1; - - mfsdr (SDR0_PFC1, pfc1); - pfc1 &= ~(0x01e00000); - pfc1 |= 0x01200000; - mtsdr (SDR0_PFC1, pfc1); -#endif - - /* first clear all mac-addresses */ - for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) - memcpy(ethaddr[eth_num], "\0\0\0\0\0\0", 6); - - for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) { - int ethaddr_idx = eth_num + CONFIG_EMAC_NR_START; - switch (eth_num) { - default: /* fall through */ - case 0: - eth_getenv_enetaddr("ethaddr", ethaddr[ethaddr_idx]); - hw_addr[eth_num] = 0x0; - break; -#ifdef CONFIG_HAS_ETH1 - case 1: - eth_getenv_enetaddr("eth1addr", ethaddr[ethaddr_idx]); - hw_addr[eth_num] = 0x100; - break; -#endif -#ifdef CONFIG_HAS_ETH2 - case 2: - eth_getenv_enetaddr("eth2addr", ethaddr[ethaddr_idx]); -#if defined(CONFIG_460GT) - hw_addr[eth_num] = 0x300; -#else - hw_addr[eth_num] = 0x400; -#endif - break; -#endif -#ifdef CONFIG_HAS_ETH3 - case 3: - eth_getenv_enetaddr("eth3addr", ethaddr[ethaddr_idx]); -#if defined(CONFIG_460GT) - hw_addr[eth_num] = 0x400; -#else - hw_addr[eth_num] = 0x600; -#endif - break; -#endif - } - } - - /* set phy num and mode */ - bis->bi_phynum[0] = CONFIG_PHY_ADDR; - bis->bi_phymode[0] = 0; - -#if defined(CONFIG_PHY1_ADDR) - bis->bi_phynum[1] = CONFIG_PHY1_ADDR; - bis->bi_phymode[1] = 0; -#endif -#if defined(CONFIG_440GX) - bis->bi_phynum[2] = CONFIG_PHY2_ADDR; - bis->bi_phynum[3] = CONFIG_PHY3_ADDR; - bis->bi_phymode[2] = 2; - bis->bi_phymode[3] = 2; -#endif - -#if defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_405EX) - ppc_4xx_eth_setup_bridge(0, bis); -#endif - - for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) { - /* - * See if we can actually bring up the interface, - * otherwise, skip it - */ - if (memcmp (ethaddr[eth_num], "\0\0\0\0\0\0", 6) == 0) { - bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; - continue; - } - - /* Allocate device structure */ - dev = (struct eth_device *) malloc (sizeof (*dev)); - if (dev == NULL) { - printf ("ppc_4xx_eth_initialize: " - "Cannot allocate eth_device %d\n", eth_num); - return (-1); - } - memset(dev, 0, sizeof(*dev)); - - /* Allocate our private use data */ - hw = (EMAC_4XX_HW_PST) malloc (sizeof (*hw)); - if (hw == NULL) { - printf ("ppc_4xx_eth_initialize: " - "Cannot allocate private hw data for eth_device %d", - eth_num); - free (dev); - return (-1); - } - memset(hw, 0, sizeof(*hw)); - - hw->hw_addr = hw_addr[eth_num]; - memcpy (dev->enetaddr, ethaddr[eth_num], 6); - hw->devnum = eth_num; - hw->print_speed = 1; - - sprintf (dev->name, "ppc_4xx_eth%d", eth_num - CONFIG_EMAC_NR_START); - dev->priv = (void *) hw; - dev->init = ppc_4xx_eth_init; - dev->halt = ppc_4xx_eth_halt; - dev->send = ppc_4xx_eth_send; - dev->recv = ppc_4xx_eth_rx; - - eth_register(dev); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - int retval; - struct mii_dev *mdiodev = mdio_alloc(); - if (!mdiodev) - return -ENOMEM; - strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN); - mdiodev->read = emac4xx_miiphy_read; - mdiodev->write = emac4xx_miiphy_write; - - retval = mdio_register(mdiodev); - if (retval < 0) - return retval; -#endif - - if (0 == virgin) { - /* set the MAL IER ??? names may change with new spec ??? */ -#if defined(CONFIG_440SPE) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_405EX) - mal_ier = - MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE | - MAL_IER_DE | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE ; -#else - mal_ier = - MAL_IER_DE | MAL_IER_NE | MAL_IER_TE | - MAL_IER_OPBE | MAL_IER_PLBE; -#endif - mtdcr (MAL0_ESR, 0xffffffff); /* clear pending interrupts */ - mtdcr (MAL0_TXDEIR, 0xffffffff); /* clear pending interrupts */ - mtdcr (MAL0_RXDEIR, 0xffffffff); /* clear pending interrupts */ - mtdcr (MAL0_IER, mal_ier); - - /* install MAL interrupt handler */ - irq_install_handler (VECNUM_MAL_SERR, - (interrupt_handler_t *) enetInt, - dev); - irq_install_handler (VECNUM_MAL_TXEOB, - (interrupt_handler_t *) enetInt, - dev); - irq_install_handler (VECNUM_MAL_RXEOB, - (interrupt_handler_t *) enetInt, - dev); - irq_install_handler (VECNUM_MAL_TXDE, - (interrupt_handler_t *) enetInt, - dev); - irq_install_handler (VECNUM_MAL_RXDE, - (interrupt_handler_t *) enetInt, - dev); - virgin = 1; - } - } /* end for each supported device */ - - return 0; -} diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 03ed224..4a5176e 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -5,7 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o obj-$(CONFIG_ALTERA_TSE) += altera_tse.o obj-$(CONFIG_AG7XXX) += ag7xxx.o obj-$(CONFIG_ARMADA100_FEC) += armada100_fec.o diff --git a/drivers/net/xilinx_ll_temac.c b/drivers/net/xilinx_ll_temac.c index ca09546..1e7e2e4 100644 --- a/drivers/net/xilinx_ll_temac.c +++ b/drivers/net/xilinx_ll_temac.c @@ -317,18 +317,9 @@ int xilinx_ll_temac_initialize(bd_t *bis, struct ll_temac_info *devinf) ll_temac->ctrladdr = devinf->ctrl_addr; if (devinf->flags & XILINX_LL_TEMAC_M_SDMA_PLB) { -#if defined(CONFIG_XILINX_440) || defined(CONFIG_XILINX_405) - if (devinf->flags & XILINX_LL_TEMAC_M_SDMA_DCR) { - ll_temac_collect_xldcr_sdma_reg_addr(dev); - ll_temac->in32 = ll_temac_xldcr_in32; - ll_temac->out32 = ll_temac_xldcr_out32; - } else -#endif - { - ll_temac_collect_xlplb_sdma_reg_addr(dev); - ll_temac->in32 = ll_temac_xlplb_in32; - ll_temac->out32 = ll_temac_xlplb_out32; - } + ll_temac_collect_xlplb_sdma_reg_addr(dev); + ll_temac->in32 = ll_temac_xlplb_in32; + ll_temac->out32 = ll_temac_xlplb_out32; ll_temac->ctrlinit = ll_temac_init_sdma; ll_temac->ctrlhalt = ll_temac_halt_sdma; ll_temac->ctrlreset = ll_temac_reset_sdma; diff --git a/drivers/net/xilinx_ll_temac_sdma.c b/drivers/net/xilinx_ll_temac_sdma.c index 07c5f6b..8176f7b 100644 --- a/drivers/net/xilinx_ll_temac_sdma.c +++ b/drivers/net/xilinx_ll_temac_sdma.c @@ -55,65 +55,6 @@ struct rtx_cdmac_bd { */ static struct rtx_cdmac_bd cdmac_bd __aligned(32); -#if defined(CONFIG_XILINX_440) || defined(CONFIG_XILINX_405) - -/* - * Indirect DCR access operations mi{ft}dcr_xilinx() espacialy - * for Xilinx PowerPC implementations on FPGA. - * - * FIXME: This part should go up to arch/powerpc -- but where? - */ -#include <asm/processor.h> -#define XILINX_INDIRECT_DCR_ADDRESS_REG 0 -#define XILINX_INDIRECT_DCR_ACCESS_REG 1 -inline unsigned mifdcr_xilinx(const unsigned dcrn) -{ - mtdcr(XILINX_INDIRECT_DCR_ADDRESS_REG, dcrn); - return mfdcr(XILINX_INDIRECT_DCR_ACCESS_REG); -} -inline void mitdcr_xilinx(const unsigned dcrn, int val) -{ - mtdcr(XILINX_INDIRECT_DCR_ADDRESS_REG, dcrn); - mtdcr(XILINX_INDIRECT_DCR_ACCESS_REG, val); -} - -/* Xilinx Device Control Register (DCR) in/out accessors */ -inline unsigned ll_temac_xldcr_in32(phys_addr_t addr) -{ - return mifdcr_xilinx((const unsigned)addr); -} -inline void ll_temac_xldcr_out32(phys_addr_t addr, unsigned value) -{ - mitdcr_xilinx((const unsigned)addr, value); -} - -void ll_temac_collect_xldcr_sdma_reg_addr(struct eth_device *dev) -{ - struct ll_temac *ll_temac = dev->priv; - phys_addr_t dmac_ctrl = ll_temac->ctrladdr; - phys_addr_t *ra = ll_temac->sdma_reg_addr; - - ra[TX_NXTDESC_PTR] = dmac_ctrl + TX_NXTDESC_PTR; - ra[TX_CURBUF_ADDR] = dmac_ctrl + TX_CURBUF_ADDR; - ra[TX_CURBUF_LENGTH] = dmac_ctrl + TX_CURBUF_LENGTH; - ra[TX_CURDESC_PTR] = dmac_ctrl + TX_CURDESC_PTR; - ra[TX_TAILDESC_PTR] = dmac_ctrl + TX_TAILDESC_PTR; - ra[TX_CHNL_CTRL] = dmac_ctrl + TX_CHNL_CTRL; - ra[TX_IRQ_REG] = dmac_ctrl + TX_IRQ_REG; - ra[TX_CHNL_STS] = dmac_ctrl + TX_CHNL_STS; - ra[RX_NXTDESC_PTR] = dmac_ctrl + RX_NXTDESC_PTR; - ra[RX_CURBUF_ADDR] = dmac_ctrl + RX_CURBUF_ADDR; - ra[RX_CURBUF_LENGTH] = dmac_ctrl + RX_CURBUF_LENGTH; - ra[RX_CURDESC_PTR] = dmac_ctrl + RX_CURDESC_PTR; - ra[RX_TAILDESC_PTR] = dmac_ctrl + RX_TAILDESC_PTR; - ra[RX_CHNL_CTRL] = dmac_ctrl + RX_CHNL_CTRL; - ra[RX_IRQ_REG] = dmac_ctrl + RX_IRQ_REG; - ra[RX_CHNL_STS] = dmac_ctrl + RX_CHNL_STS; - ra[DMA_CONTROL_REG] = dmac_ctrl + DMA_CONTROL_REG; -} - -#endif /* CONFIG_XILINX_440 || ONFIG_XILINX_405 */ - /* Xilinx Processor Local Bus (PLB) in/out accessors */ inline unsigned ll_temac_xlplb_in32(phys_addr_t addr) { diff --git a/drivers/net/xilinx_ll_temac_sdma.h b/drivers/net/xilinx_ll_temac_sdma.h index 41659c0..67a8b0f 100644 --- a/drivers/net/xilinx_ll_temac_sdma.h +++ b/drivers/net/xilinx_ll_temac_sdma.h @@ -241,17 +241,6 @@ enum dmac_ctrl { #define DMA_CONTROL_TPE (1 << 2) #define DMA_CONTROL_RESET (1 << 0) -#if defined(CONFIG_XILINX_440) || defined(CONFIG_XILINX_405) - -/* Xilinx Device Control Register (DCR) in/out accessors */ -unsigned ll_temac_xldcr_in32(phys_addr_t addr); -void ll_temac_xldcr_out32(phys_addr_t addr, unsigned value); - -/* collect all register addresses for Xilinx DCR in/out accessors */ -void ll_temac_collect_xldcr_sdma_reg_addr(struct eth_device *dev); - -#endif /* CONFIG_XILINX_440 || CONFIG_XILINX_405 */ - /* Xilinx Processor Local Bus (PLB) in/out accessors */ unsigned ll_temac_xlplb_in32(phys_addr_t base); void ll_temac_xlplb_out32(phys_addr_t base, unsigned value); diff --git a/drivers/pci/pci_indirect.c b/drivers/pci/pci_indirect.c index efa13a2..4a36749 100644 --- a/drivers/pci/pci_indirect.c +++ b/drivers/pci/pci_indirect.c @@ -32,24 +32,6 @@ indirect_##rw##_config_##size(struct pci_controller *hose, \ cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ return 0; \ } -#elif defined(CONFIG_440GX) || defined(CONFIG_440GP) || defined(CONFIG_440SP) || \ - defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT) -#define INDIRECT_PCI_OP(rw, size, type, op, mask) \ -static int \ -indirect_##rw##_config_##size(struct pci_controller *hose, \ - pci_dev_t dev, int offset, type val) \ -{ \ - u32 b, d,f; \ - b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev); \ - b = b - hose->first_busno; \ - dev = PCI_BDF(b, d, f); \ - if (PCI_BUS(dev) > 0) \ - out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000001); \ - else \ - out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \ - cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ - return 0; \ -} #else #define INDIRECT_PCI_OP(rw, size, type, op, mask) \ static int \ @@ -66,32 +48,12 @@ indirect_##rw##_config_##size(struct pci_controller *hose, \ } #endif -#define INDIRECT_PCI_OP_ERRATA6(rw, size, type, op, mask) \ -static int \ -indirect_##rw##_config_##size(struct pci_controller *hose, \ - pci_dev_t dev, int offset, type val) \ -{ \ - unsigned int msr = mfmsr(); \ - mtmsr(msr & ~(MSR_EE | MSR_CE)); \ - out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \ - cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ - out_le32(hose->cfg_addr, 0x00000000); \ - mtmsr(msr); \ - return 0; \ -} - INDIRECT_PCI_OP(read, byte, u8 *, in_8, 3) INDIRECT_PCI_OP(read, word, u16 *, in_le16, 2) INDIRECT_PCI_OP(read, dword, u32 *, in_le32, 0) -#ifdef CONFIG_405GP -INDIRECT_PCI_OP_ERRATA6(write, byte, u8, out_8, 3) -INDIRECT_PCI_OP_ERRATA6(write, word, u16, out_le16, 2) -INDIRECT_PCI_OP_ERRATA6(write, dword, u32, out_le32, 0) -#else INDIRECT_PCI_OP(write, byte, u8, out_8, 3) INDIRECT_PCI_OP(write, word, u16, out_le16, 2) INDIRECT_PCI_OP(write, dword, u32, out_le32, 0) -#endif void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data) { diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 272df07..fdfc870 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -51,7 +51,6 @@ #endif #if defined(CONFIG_CPU_ARM920T) || \ - defined(CONFIG_440EP) || \ defined(CONFIG_PCI_OHCI) || \ defined(CONFIG_SYS_OHCI_USE_NPS) # define OHCI_USE_NPS /* force NoPowerSwitching mode */ |