diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/serial/serial_lpuart.c | 267 |
1 files changed, 142 insertions, 125 deletions
diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c index beb4243..3f030a6 100644 --- a/drivers/serial/serial_lpuart.c +++ b/drivers/serial/serial_lpuart.c @@ -6,6 +6,7 @@ #include <common.h> #include <dm.h> +#include <fsl_lpuart.h> #include <watchdog.h> #include <asm/io.h> #include <serial.h> @@ -48,14 +49,56 @@ DECLARE_GLOBAL_DATA_PTR; +#define LPUART_FLAG_REGMAP_32BIT_REG BIT(0) +#define LPUART_FLAG_REGMAP_ENDIAN_BIG BIT(1) + struct lpuart_serial_platdata { - struct lpuart_fsl *reg; + void *reg; + ulong flags; }; -#ifndef CONFIG_LPUART_32B_REG -static void _lpuart_serial_setbrg(struct lpuart_fsl *base, int baudrate) +static void lpuart_read32(u32 flags, u32 *addr, u32 *val) +{ + if (flags & LPUART_FLAG_REGMAP_32BIT_REG) { + if (flags & LPUART_FLAG_REGMAP_ENDIAN_BIG) + *(u32 *)val = in_be32(addr); + else + *(u32 *)val = in_le32(addr); + } +} + +static void lpuart_write32(u32 flags, u32 *addr, u32 val) +{ + if (flags & LPUART_FLAG_REGMAP_32BIT_REG) { + if (flags & LPUART_FLAG_REGMAP_ENDIAN_BIG) + out_be32(addr, val); + else + out_le32(addr, val); + } +} + + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ 0 +#endif + +u32 __weak get_lpuart_clk(void) { - u32 clk = mxc_get_clock(MXC_UART_CLK); + return CONFIG_SYS_CLK_FREQ; +} + +static bool is_lpuart32(struct udevice *dev) +{ + struct lpuart_serial_platdata *plat = dev->platdata; + + return plat->flags & LPUART_FLAG_REGMAP_32BIT_REG; +} + +static void _lpuart_serial_setbrg(struct lpuart_serial_platdata *plat, + int baudrate) +{ + struct lpuart_fsl *base = plat->reg; + u32 clk = get_lpuart_clk(); u16 sbr; sbr = (u16)(clk / (16 * baudrate)); @@ -65,8 +108,9 @@ static void _lpuart_serial_setbrg(struct lpuart_fsl *base, int baudrate) __raw_writeb(sbr & 0xff, &base->ubdl); } -static int _lpuart_serial_getc(struct lpuart_fsl *base) +static int _lpuart_serial_getc(struct lpuart_serial_platdata *plat) { + struct lpuart_fsl *base = plat->reg; while (!(__raw_readb(&base->us1) & (US1_RDRF | US1_OR))) WATCHDOG_RESET(); @@ -75,8 +119,11 @@ static int _lpuart_serial_getc(struct lpuart_fsl *base) return __raw_readb(&base->ud); } -static void _lpuart_serial_putc(struct lpuart_fsl *base, const char c) +static void _lpuart_serial_putc(struct lpuart_serial_platdata *plat, + const char c) { + struct lpuart_fsl *base = plat->reg; + while (!(__raw_readb(&base->us1) & US1_TDRE)) WATCHDOG_RESET(); @@ -84,8 +131,10 @@ static void _lpuart_serial_putc(struct lpuart_fsl *base, const char c) } /* Test whether a character is in the RX buffer */ -static int _lpuart_serial_tstc(struct lpuart_fsl *base) +static int _lpuart_serial_tstc(struct lpuart_serial_platdata *plat) { + struct lpuart_fsl *base = plat->reg; + if (__raw_readb(&base->urcfifo) == 0) return 0; @@ -96,8 +145,9 @@ static int _lpuart_serial_tstc(struct lpuart_fsl *base) * Initialise the serial port with the given baudrate. The settings * are always 8 data bits, no parity, 1 stop bit, no start bits. */ -static int _lpuart_serial_init(struct lpuart_fsl *base) +static int _lpuart_serial_init(struct lpuart_serial_platdata *plat) { + struct lpuart_fsl *base = (struct lpuart_fsl *)plat->reg; u8 ctrl; ctrl = __raw_readb(&base->uc2); @@ -115,101 +165,71 @@ static int _lpuart_serial_init(struct lpuart_fsl *base) __raw_writeb(CFIFO_TXFLUSH | CFIFO_RXFLUSH, &base->ucfifo); /* provide data bits, parity, stop bit, etc */ - _lpuart_serial_setbrg(base, gd->baudrate); + _lpuart_serial_setbrg(plat, gd->baudrate); __raw_writeb(UC2_RE | UC2_TE, &base->uc2); return 0; } -static int lpuart_serial_setbrg(struct udevice *dev, int baudrate) -{ - struct lpuart_serial_platdata *plat = dev->platdata; - struct lpuart_fsl *reg = plat->reg; - - _lpuart_serial_setbrg(reg, baudrate); - - return 0; -} - -static int lpuart_serial_getc(struct udevice *dev) -{ - struct lpuart_serial_platdata *plat = dev->platdata; - struct lpuart_fsl *reg = plat->reg; - - return _lpuart_serial_getc(reg); -} - -static int lpuart_serial_putc(struct udevice *dev, const char c) -{ - struct lpuart_serial_platdata *plat = dev->platdata; - struct lpuart_fsl *reg = plat->reg; - - _lpuart_serial_putc(reg, c); - - return 0; -} - -static int lpuart_serial_pending(struct udevice *dev, bool input) -{ - struct lpuart_serial_platdata *plat = dev->platdata; - struct lpuart_fsl *reg = plat->reg; - - if (input) - return _lpuart_serial_tstc(reg); - else - return __raw_readb(®->us1) & US1_TDRE ? 0 : 1; -} - -static int lpuart_serial_probe(struct udevice *dev) -{ - struct lpuart_serial_platdata *plat = dev->platdata; - struct lpuart_fsl *reg = plat->reg; - - return _lpuart_serial_init(reg); -} -#else - -u32 __weak get_lpuart_clk(void) -{ - return CONFIG_SYS_CLK_FREQ; -} - -static void _lpuart32_serial_setbrg(struct lpuart_fsl *base, int baudrate) +static void _lpuart32_serial_setbrg(struct lpuart_serial_platdata *plat, + int baudrate) { + struct lpuart_fsl_reg32 *base = plat->reg; u32 clk = get_lpuart_clk(); u32 sbr; sbr = (clk / (16 * baudrate)); /* place adjustment later - n/32 BRFA */ - out_be32(&base->baud, sbr); + lpuart_write32(plat->flags, &base->baud, sbr); } -static int _lpuart32_serial_getc(struct lpuart_fsl *base) +static int _lpuart32_serial_getc(struct lpuart_serial_platdata *plat) { + struct lpuart_fsl_reg32 *base = plat->reg; u32 stat; - while (((stat = in_be32(&base->stat)) & STAT_RDRF) == 0) { - out_be32(&base->stat, STAT_FLAGS); + lpuart_read32(plat->flags, &base->stat, &stat); + while ((stat & STAT_RDRF) == 0) { + lpuart_write32(plat->flags, &base->stat, STAT_FLAGS); WATCHDOG_RESET(); + lpuart_read32(plat->flags, &base->stat, &stat); } - return in_be32(&base->data) & 0x3ff; + /* Reuse stat */ + lpuart_read32(plat->flags, &base->data, &stat); + + return stat & 0x3ff; } -static void _lpuart32_serial_putc(struct lpuart_fsl *base, const char c) +static void _lpuart32_serial_putc(struct lpuart_serial_platdata *plat, + const char c) { - while (!(in_be32(&base->stat) & STAT_TDRE)) + struct lpuart_fsl_reg32 *base = plat->reg; + u32 stat; + + while (true) { + lpuart_read32(plat->flags, &base->stat, &stat); + + if ((stat & STAT_TDRE)) + break; + WATCHDOG_RESET(); + } - out_be32(&base->data, c); + lpuart_write32(plat->flags, &base->data, c); } /* Test whether a character is in the RX buffer */ -static int _lpuart32_serial_tstc(struct lpuart_fsl *base) +static int _lpuart32_serial_tstc(struct lpuart_serial_platdata *plat) { - if ((in_be32(&base->water) >> 24) == 0) + struct lpuart_fsl_reg32 *base = plat->reg; + u32 water; + + lpuart_read32(plat->flags, &base->water, &water); + + if ((water >> 24) == 0) return 0; return 1; @@ -219,75 +239,94 @@ static int _lpuart32_serial_tstc(struct lpuart_fsl *base) * Initialise the serial port with the given baudrate. The settings * are always 8 data bits, no parity, 1 stop bit, no start bits. */ -static int _lpuart32_serial_init(struct lpuart_fsl *base) +static int _lpuart32_serial_init(struct lpuart_serial_platdata *plat) { - u8 ctrl; + struct lpuart_fsl_reg32 *base = (struct lpuart_fsl_reg32 *)plat->reg; + u32 ctrl; - ctrl = in_be32(&base->ctrl); + lpuart_read32(plat->flags, &base->ctrl, &ctrl); ctrl &= ~CTRL_RE; ctrl &= ~CTRL_TE; - out_be32(&base->ctrl, ctrl); + lpuart_write32(plat->flags, &base->ctrl, ctrl); - out_be32(&base->modir, 0); - out_be32(&base->fifo, ~(FIFO_TXFE | FIFO_RXFE)); + lpuart_write32(plat->flags, &base->modir, 0); + lpuart_write32(plat->flags, &base->fifo, ~(FIFO_TXFE | FIFO_RXFE)); - out_be32(&base->match, 0); + lpuart_write32(plat->flags, &base->match, 0); /* provide data bits, parity, stop bit, etc */ - _lpuart32_serial_setbrg(base, gd->baudrate); + _lpuart32_serial_setbrg(plat, gd->baudrate); - out_be32(&base->ctrl, CTRL_RE | CTRL_TE); + lpuart_write32(plat->flags, &base->ctrl, CTRL_RE | CTRL_TE); return 0; } -static int lpuart32_serial_setbrg(struct udevice *dev, int baudrate) +static int lpuart_serial_setbrg(struct udevice *dev, int baudrate) { struct lpuart_serial_platdata *plat = dev->platdata; - struct lpuart_fsl *reg = plat->reg; - _lpuart32_serial_setbrg(reg, baudrate); + if (is_lpuart32(dev)) + _lpuart32_serial_setbrg(plat, baudrate); + else + _lpuart_serial_setbrg(plat, baudrate); return 0; } -static int lpuart32_serial_getc(struct udevice *dev) +static int lpuart_serial_getc(struct udevice *dev) { struct lpuart_serial_platdata *plat = dev->platdata; - struct lpuart_fsl *reg = plat->reg; - return _lpuart32_serial_getc(reg); + if (is_lpuart32(dev)) + return _lpuart32_serial_getc(plat); + + return _lpuart_serial_getc(plat); } -static int lpuart32_serial_putc(struct udevice *dev, const char c) +static int lpuart_serial_putc(struct udevice *dev, const char c) { struct lpuart_serial_platdata *plat = dev->platdata; - struct lpuart_fsl *reg = plat->reg; - _lpuart32_serial_putc(reg, c); + if (is_lpuart32(dev)) + _lpuart32_serial_putc(plat, c); + else + _lpuart_serial_putc(plat, c); return 0; } -static int lpuart32_serial_pending(struct udevice *dev, bool input) +static int lpuart_serial_pending(struct udevice *dev, bool input) { struct lpuart_serial_platdata *plat = dev->platdata; struct lpuart_fsl *reg = plat->reg; + struct lpuart_fsl_reg32 *reg32 = plat->reg; + u32 stat; + + if (is_lpuart32(dev)) { + if (input) { + return _lpuart32_serial_tstc(plat); + } else { + lpuart_read32(plat->flags, ®32->stat, &stat); + return stat & STAT_TDRE ? 0 : 1; + } + } if (input) - return _lpuart32_serial_tstc(reg); + return _lpuart_serial_tstc(plat); else - return in_be32(®->stat) & STAT_TDRE ? 0 : 1; + return __raw_readb(®->us1) & US1_TDRE ? 0 : 1; } -static int lpuart32_serial_probe(struct udevice *dev) +static int lpuart_serial_probe(struct udevice *dev) { struct lpuart_serial_platdata *plat = dev->platdata; - struct lpuart_fsl *reg = plat->reg; - return _lpuart32_serial_init(reg); + if (is_lpuart32(dev)) + return _lpuart32_serial_init(plat); + else + return _lpuart_serial_init(plat); } -#endif /* CONFIG_LPUART_32B_REG */ static int lpuart_serial_ofdata_to_platdata(struct udevice *dev) { @@ -298,12 +337,12 @@ static int lpuart_serial_ofdata_to_platdata(struct udevice *dev) if (addr == FDT_ADDR_T_NONE) return -EINVAL; - plat->reg = (struct lpuart_fsl *)addr; + plat->reg = (void *)addr; + plat->flags = dev_get_driver_data(dev); return 0; } -#ifndef CONFIG_LPUART_32B_REG static const struct dm_serial_ops lpuart_serial_ops = { .putc = lpuart_serial_putc, .pending = lpuart_serial_pending, @@ -312,7 +351,9 @@ static const struct dm_serial_ops lpuart_serial_ops = { }; static const struct udevice_id lpuart_serial_ids[] = { - { .compatible = "fsl,vf610-lpuart" }, + { .compatible = "fsl,ls1021a-lpuart", .data = + LPUART_FLAG_REGMAP_32BIT_REG | LPUART_FLAG_REGMAP_ENDIAN_BIG }, + { .compatible = "fsl,vf610-lpuart"}, { } }; @@ -326,27 +367,3 @@ U_BOOT_DRIVER(serial_lpuart) = { .ops = &lpuart_serial_ops, .flags = DM_FLAG_PRE_RELOC, }; -#else /* CONFIG_LPUART_32B_REG */ -static const struct dm_serial_ops lpuart32_serial_ops = { - .putc = lpuart32_serial_putc, - .pending = lpuart32_serial_pending, - .getc = lpuart32_serial_getc, - .setbrg = lpuart32_serial_setbrg, -}; - -static const struct udevice_id lpuart32_serial_ids[] = { - { .compatible = "fsl,ls1021a-lpuart" }, - { } -}; - -U_BOOT_DRIVER(serial_lpuart32) = { - .name = "serial_lpuart32", - .id = UCLASS_SERIAL, - .of_match = lpuart32_serial_ids, - .ofdata_to_platdata = lpuart_serial_ofdata_to_platdata, - .platdata_auto_alloc_size = sizeof(struct lpuart_serial_platdata), - .probe = lpuart32_serial_probe, - .ops = &lpuart32_serial_ops, - .flags = DM_FLAG_PRE_RELOC, -}; -#endif /* CONFIG_LPUART_32B_REG */ |