diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/e1000.c | 137 | ||||
-rw-r--r-- | drivers/net/e1000.h | 5 |
2 files changed, 142 insertions, 0 deletions
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 807012c..412ed14 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -30,6 +30,7 @@ tested on both gig copper and gig fiber boards */ #include <common.h> +#include <dm.h> #include <errno.h> #include <pci.h> #include "e1000.h" @@ -47,12 +48,21 @@ tested on both gig copper and gig fiber boards /* Intel i210 needs the DMA descriptor rings aligned to 128b */ #define E1000_BUFFER_ALIGN 128 +/* + * TODO(sjg@chromium.org): Even with driver model we share these buffers. + * Concurrent receiving on multiple active Ethernet devices will not work. + * Normally U-Boot does not support this anyway. To fix it in this driver, + * move these buffers and the tx/rx pointers to struct e1000_hw. + */ DEFINE_ALIGN_BUFFER(struct e1000_tx_desc, tx_base, 16, E1000_BUFFER_ALIGN); DEFINE_ALIGN_BUFFER(struct e1000_rx_desc, rx_base, 16, E1000_BUFFER_ALIGN); DEFINE_ALIGN_BUFFER(unsigned char, packet, 4096, E1000_BUFFER_ALIGN); static int tx_tail; static int rx_tail, rx_last; +#ifdef CONFIG_DM_ETH +static int num_cards; /* Number of E1000 devices seen so far */ +#endif static struct pci_device_id e1000_supported[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82542) }, @@ -5295,8 +5305,10 @@ void e1000_get_bus_type(struct e1000_hw *hw) } } +#ifndef CONFIG_DM_ETH /* A list of all registered e1000 devices */ static LIST_HEAD(e1000_hw_list); +#endif static int e1000_init_one(struct e1000_hw *hw, int cardnum, pci_dev_t devno, unsigned char enetaddr[6]) @@ -5383,6 +5395,7 @@ static void e1000_name(char *str, int cardnum) sprintf(str, "e1000#%u", cardnum); } +#ifndef CONFIG_DM_ETH /************************************************************************** TRANSMIT - Transmit a frame ***************************************************************************/ @@ -5495,13 +5508,22 @@ struct e1000_hw *e1000_find_card(unsigned int cardnum) return NULL; } +#endif /* !CONFIG_DM_ETH */ #ifdef CONFIG_CMD_E1000 static int do_e1000(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned char *mac = NULL; +#ifdef CONFIG_DM_ETH + struct eth_pdata *plat; + struct udevice *dev; + char name[30]; + int ret; +#else struct e1000_hw *hw; +#endif + int cardnum; if (argc < 3) { cmd_usage(cmdtp); @@ -5510,9 +5532,18 @@ static int do_e1000(cmd_tbl_t *cmdtp, int flag, /* Make sure we can find the requested e1000 card */ cardnum = simple_strtoul(argv[1], NULL, 10); +#ifdef CONFIG_DM_ETH + e1000_name(name, cardnum); + ret = uclass_get_device_by_name(UCLASS_ETH, name, &dev); + if (!ret) { + plat = dev_get_platdata(dev); + mac = plat->enetaddr; + } +#else hw = e1000_find_card(cardnum); if (hw) mac = hw->nic->enetaddr; +#endif if (!mac) { printf("e1000: ERROR: No such device: e1000#%s\n", argv[1]); return 1; @@ -5547,3 +5578,109 @@ U_BOOT_CMD( " - Manage the Intel E1000 PCI device" ); #endif /* not CONFIG_CMD_E1000 */ + +#ifdef CONFIG_DM_ETH +static int e1000_eth_start(struct udevice *dev) +{ + struct eth_pdata *plat = dev_get_platdata(dev); + struct e1000_hw *hw = dev_get_priv(dev); + + return _e1000_init(hw, plat->enetaddr); +} + +static void e1000_eth_stop(struct udevice *dev) +{ + struct e1000_hw *hw = dev_get_priv(dev); + + _e1000_disable(hw); +} + +static int e1000_eth_send(struct udevice *dev, void *packet, int length) +{ + struct e1000_hw *hw = dev_get_priv(dev); + int ret; + + ret = _e1000_transmit(hw, packet, length); + + return ret ? 0 : -ETIMEDOUT; +} + +static int e1000_eth_recv(struct udevice *dev, int flags, uchar **packetp) +{ + struct e1000_hw *hw = dev_get_priv(dev); + int len; + + len = _e1000_poll(hw); + if (len) + *packetp = packet; + + return len ? len : -EAGAIN; +} + +static int e1000_free_pkt(struct udevice *dev, uchar *packet, int length) +{ + struct e1000_hw *hw = dev_get_priv(dev); + + fill_rx(hw); + + return 0; +} + +static int e1000_eth_probe(struct udevice *dev) +{ + struct eth_pdata *plat = dev_get_platdata(dev); + struct e1000_hw *hw = dev_get_priv(dev); + int ret; + + hw->name = dev->name; + ret = e1000_init_one(hw, trailing_strtol(dev->name), pci_get_bdf(dev), + plat->enetaddr); + if (ret < 0) { + printf(pr_fmt("failed to initialize card: %d\n"), ret); + return ret; + } + + return 0; +} + +static int e1000_eth_bind(struct udevice *dev) +{ + char name[20]; + + /* + * A simple way to number the devices. When device tree is used this + * is unnecessary, but when the device is just discovered on the PCI + * bus we need a name. We could instead have the uclass figure out + * which devices are different and number them. + */ + e1000_name(name, num_cards++); + + return device_set_name(dev, name); +} + +static const struct eth_ops e1000_eth_ops = { + .start = e1000_eth_start, + .send = e1000_eth_send, + .recv = e1000_eth_recv, + .stop = e1000_eth_stop, + .free_pkt = e1000_free_pkt, +}; + +static const struct udevice_id e1000_eth_ids[] = { + { .compatible = "intel,e1000" }, + { } +}; + +U_BOOT_DRIVER(eth_e1000) = { + .name = "eth_e1000", + .id = UCLASS_ETH, + .of_match = e1000_eth_ids, + .bind = e1000_eth_bind, + .probe = e1000_eth_probe, + .ops = &e1000_eth_ops, + .priv_auto_alloc_size = sizeof(struct e1000_hw), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), +}; + +U_BOOT_PCI_DEVICE(eth_e1000, e1000_supported); +#endif diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index da04cab..c851922 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -22,7 +22,10 @@ #include <linux/list.h> #include <malloc.h> #include <net.h> +/* Avoids a compile error since struct eth_device is not defined */ +#ifndef CONFIG_DM_ETH #include <netdev.h> +#endif #include <asm/io.h> #include <pci.h> @@ -1073,7 +1076,9 @@ typedef enum { struct e1000_hw { const char *name; struct list_head list_node; +#ifndef CONFIG_DM_ETH struct eth_device *nic; +#endif #ifdef CONFIG_E1000_SPI struct spi_slave spi; #endif |