summaryrefslogtreecommitdiff
path: root/include/asm-blackfin/config-pre.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-blackfin/config-pre.h')
-rw-r--r--include/asm-blackfin/config-pre.h80
1 files changed, 0 insertions, 80 deletions
diff --git a/include/asm-blackfin/config-pre.h b/include/asm-blackfin/config-pre.h
deleted file mode 100644
index 4531519..0000000
--- a/include/asm-blackfin/config-pre.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * config-pre.h - common defines for Blackfin boards in config.h
- *
- * Copyright (c) 2007-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __ASM_BLACKFIN_CONFIG_PRE_H__
-#define __ASM_BLACKFIN_CONFIG_PRE_H__
-
-/* Misc helper functions */
-#define XMK_STR(x) #x
-#define MK_STR(x) XMK_STR(x)
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-/* Bootmode defines -- your config needs to select this via CONFIG_BFIN_BOOT_MODE.
- * Depending on your cpu, some of these may not be valid, check your HRM.
- * The actual values here are meaningless as long as they're unique.
- */
-#define BFIN_BOOT_BYPASS 1 /* bypass bootrom */
-#define BFIN_BOOT_PARA 2 /* boot ldr out of parallel flash */
-#define BFIN_BOOT_SPI_MASTER 3 /* boot ldr out of serial flash */
-#define BFIN_BOOT_SPI_SLAVE 4 /* boot ldr as spi slave */
-#define BFIN_BOOT_TWI_MASTER 5 /* boot ldr over twi device */
-#define BFIN_BOOT_TWI_SLAVE 6 /* boot ldr over twi slave */
-#define BFIN_BOOT_UART 7 /* boot ldr over uart */
-#define BFIN_BOOT_IDLE 8 /* do nothing, just idle */
-#define BFIN_BOOT_FIFO 9 /* boot ldr out of FIFO */
-#define BFIN_BOOT_MEM 10 /* boot ldr out of memory (warmboot) */
-#define BFIN_BOOT_16HOST_DMA 11 /* boot ldr from 16-bit host dma */
-#define BFIN_BOOT_8HOST_DMA 12 /* boot ldr from 8-bit host dma */
-#define BFIN_BOOT_NAND 13 /* boot ldr from nand flash */
-
-#ifndef __ASSEMBLY__
-static inline const char *get_bfin_boot_mode(int bfin_boot)
-{
- switch (bfin_boot) {
- case BFIN_BOOT_BYPASS: return "bypass";
- case BFIN_BOOT_PARA: return "parallel flash";
- case BFIN_BOOT_SPI_MASTER: return "spi flash";
- case BFIN_BOOT_SPI_SLAVE: return "spi slave";
- case BFIN_BOOT_TWI_MASTER: return "i2c flash";
- case BFIN_BOOT_TWI_SLAVE: return "i2c slave";
- case BFIN_BOOT_UART: return "uart";
- case BFIN_BOOT_IDLE: return "idle";
- case BFIN_BOOT_FIFO: return "fifo";
- case BFIN_BOOT_MEM: return "memory";
- case BFIN_BOOT_16HOST_DMA: return "16bit dma";
- case BFIN_BOOT_8HOST_DMA: return "8bit dma";
- case BFIN_BOOT_NAND: return "nand flash";
- default: return "INVALID";
- }
-}
-#endif
-
-/* Most bootroms allow for EVT1 redirection */
-#if ((defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__)) \
- && __SILICON_REVISION__ < 3) || defined(__ADSPBF561__)
-# undef CONFIG_BFIN_BOOTROM_USES_EVT1
-#else
-# define CONFIG_BFIN_BOOTROM_USES_EVT1
-#endif
-
-/* Define the default SPI CS used when booting out of SPI */
-#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
- defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) || \
- defined(__ADSPBF51x__)
-# define BFIN_BOOT_SPI_SSEL 2
-#else
-# define BFIN_BOOT_SPI_SSEL 1
-#endif
-
-/* There is no Blackfin/NetBSD port */
-#undef CONFIG_BOOTM_NETBSD
-
-/* We rarely use interrupts, so favor throughput over latency */
-#define CONFIG_BFIN_INS_LOWOVERHEAD
-
-#endif