summaryrefslogtreecommitdiff
path: root/include/configs/M5282EVB.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/M5282EVB.h')
-rw-r--r--include/configs/M5282EVB.h170
1 files changed, 85 insertions, 85 deletions
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index 5cc64c1..a8a2655 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -39,9 +39,9 @@
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
-#define CFG_UART_PORT (0)
+#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
@@ -76,22 +76,22 @@
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
-# define CFG_DISCOVER_PHY
-# define CFG_RX_ETH_BUFFER 8
-# define CFG_FAULT_ECHO_LINK_DOWN
+# define CONFIG_SYS_DISCOVER_PHY
+# define CONFIG_SYS_RX_ETH_BUFFER 8
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CFG_FEC0_PINMUX 0
-# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
+# define CONFIG_SYS_FEC0_PINMUX 0
+# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
# define MCFFEC_TOUT_LOOP 50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-# ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CONFIG_SYS_DISCOVER_PHY
# define FECDUPLEX FULL
# define FECSPEED _100BASET
# else
-# ifndef CFG_FAULT_ECHO_LINK_DOWN
-# define CFG_FAULT_ECHO_LINK_DOWN
+# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# endif
-# endif /* CFG_DISCOVER_PHY */
+# endif /* CONFIG_SYS_DISCOVER_PHY */
#endif
#define CONFIG_BOOTDELAY 5
@@ -117,135 +117,135 @@
"save\0" \
""
-#define CFG_PROMPT "-> "
-#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "-> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x20000
+#define CONFIG_SYS_LOAD_ADDR 0x20000
-#define CFG_MEMTEST_START 0x400
-#define CFG_MEMTEST_END 0x380000
+#define CONFIG_SYS_MEMTEST_START 0x400
+#define CONFIG_SYS_MEMTEST_END 0x380000
-#define CFG_HZ 1000
-#define CFG_CLK 64000000
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_CLK 64000000
/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
-#define CFG_MFD 0x02 /* PLL Multiplication Factor Devider */
-#define CFG_RFD 0x00 /* PLL Reduce Frecuency Devider */
+#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */
+#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
-#define CFG_MBAR 0x40000000
+#define CONFIG_SYS_MBAR 0x40000000
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
-#define CFG_INIT_RAM_ADDR 0x20000000
-#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
-#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
+#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
-#define CFG_FLASH_BASE 0xffe00000
-#define CFG_INT_FLASH_BASE 0xf0000000
-#define CFG_INT_FLASH_ENABLE 0x21
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
+#define CONFIG_SYS_FLASH_BASE 0xffe00000
+#define CONFIG_SYS_INT_FLASH_BASE 0xf0000000
+#define CONFIG_SYS_INT_FLASH_ENABLE 0x21
/* If M5282 port is fully implemented the monitor base will be behind
* the vector table. */
-#if (TEXT_BASE != CFG_INT_FLASH_BASE)
-#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+#if (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#else
-#define CFG_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
+#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
#endif
-#define CFG_MONITOR_LEN 0x20000
-#define CFG_MALLOC_LEN (256 << 10)
-#define CFG_BOOTPARAMS_LEN 64*1024
+#define CONFIG_SYS_MONITOR_LEN 0x20000
+#define CONFIG_SYS_MALLOC_LEN (256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
-#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
# define CONFIG_FLASH_CFI_DRIVER 1
-# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */
-# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
-# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-# define CFG_FLASH_CHECKSUM
-# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */
+# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
+# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+# define CONFIG_SYS_FLASH_CHECKSUM
+# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#endif
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 16
+#define CONFIG_SYS_CACHELINE_SIZE 16
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
-#define CFG_CS0_BASE CFG_FLASH_BASE
-#define CFG_CS0_SIZE 2*1024*1024
-#define CFG_CS0_WIDTH 16
-#define CFG_CS0_RO 0
-#define CFG_CS0_WS 6
+#define CONFIG_SYS_CS0_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE 2*1024*1024
+#define CONFIG_SYS_CS0_WIDTH 16
+#define CONFIG_SYS_CS0_RO 0
+#define CONFIG_SYS_CS0_WS 6
/*
-#define CFG_CS3_BASE 0xE0000000
-#define CFG_CS3_SIZE 1*1024*1024
-#define CFG_CS3_WIDTH 16
-#define CFG_CS3_RO 0
-#define CFG_CS3_WS 6
+#define CONFIG_SYS_CS3_BASE 0xE0000000
+#define CONFIG_SYS_CS3_SIZE 1*1024*1024
+#define CONFIG_SYS_CS3_WIDTH 16
+#define CONFIG_SYS_CS3_RO 0
+#define CONFIG_SYS_CS3_WS 6
*/
/*-----------------------------------------------------------------------
* Port configuration
*/
-#define CFG_PACNT 0x0000000 /* Port A D[31:24] */
-#define CFG_PADDR 0x0000000
-#define CFG_PADAT 0x0000000
-
-#define CFG_PBCNT 0x0000000 /* Port B D[23:16] */
-#define CFG_PBDDR 0x0000000
-#define CFG_PBDAT 0x0000000
-
-#define CFG_PCCNT 0x0000000 /* Port C D[15:08] */
-#define CFG_PCDDR 0x0000000
-#define CFG_PCDAT 0x0000000
-
-#define CFG_PDCNT 0x0000000 /* Port D D[07:00] */
-#define CFG_PCDDR 0x0000000
-#define CFG_PCDAT 0x0000000
-
-#define CFG_PEHLPAR 0xC0
-#define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */
-#define CFG_DDRUA 0x05
-#define CFG_PJPAR 0xFF;
+#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */
+#define CONFIG_SYS_PADDR 0x0000000
+#define CONFIG_SYS_PADAT 0x0000000
+
+#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */
+#define CONFIG_SYS_PBDDR 0x0000000
+#define CONFIG_SYS_PBDAT 0x0000000
+
+#define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */
+#define CONFIG_SYS_PCDDR 0x0000000
+#define CONFIG_SYS_PCDAT 0x0000000
+
+#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */
+#define CONFIG_SYS_PCDDR 0x0000000
+#define CONFIG_SYS_PCDAT 0x0000000
+
+#define CONFIG_SYS_PEHLPAR 0xC0
+#define CONFIG_SYS_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */
+#define CONFIG_SYS_DDRUA 0x05
+#define CONFIG_SYS_PJPAR 0xFF
#endif /* _CONFIG_M5282EVB_H */