summaryrefslogtreecommitdiff
path: root/include/configs/M54455EVB.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/M54455EVB.h')
-rw-r--r--include/configs/M54455EVB.h298
1 files changed, 149 insertions, 149 deletions
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 9513279..101dced 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -39,9 +39,9 @@
#define CONFIG_M54455EVB /* M54455EVB board */
#define CONFIG_MCFUART
-#define CFG_UART_PORT (0)
+#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
@@ -88,14 +88,14 @@
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
-# define CFG_DISCOVER_PHY
-# define CFG_RX_ETH_BUFFER 8
-# define CFG_FAULT_ECHO_LINK_DOWN
-
-# define CFG_FEC0_PINMUX 0
-# define CFG_FEC1_PINMUX 0
-# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
-# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE
+# define CONFIG_SYS_DISCOVER_PHY
+# define CONFIG_SYS_RX_ETH_BUFFER 8
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+
+# define CONFIG_SYS_FEC0_PINMUX 0
+# define CONFIG_SYS_FEC1_PINMUX 0
+# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
+# define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE
# define MCFFEC_TOUT_LOOP 50000
# define CONFIG_HAS_ETH1
@@ -110,29 +110,29 @@
# define CONFIG_GATEWAYIP 192.162.1.1
# define CONFIG_OVERWRITE_ETHADDR_ONCE
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-# ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CONFIG_SYS_DISCOVER_PHY
# define FECDUPLEX FULL
# define FECSPEED _100BASET
# else
-# ifndef CFG_FAULT_ECHO_LINK_DOWN
-# define CFG_FAULT_ECHO_LINK_DOWN
+# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# endif
-# endif /* CFG_DISCOVER_PHY */
+# endif /* CONFIG_SYS_DISCOVER_PHY */
#endif
#define CONFIG_HOSTNAME M54455EVB
-#ifdef CFG_STMICRO_BOOT
+#ifdef CONFIG_SYS_STMICRO_BOOT
/* ST Micro serial flash */
-#define CFG_LOAD_ADDR2 0x40010013
+#define CONFIG_SYS_LOAD_ADDR2 0x40010013
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \
+ "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0" \
"loadaddr=0x40010000\0" \
"sbfhdr=sbfhdr.bin\0" \
"uboot=u-boot.bin\0" \
"load=tftp ${loadaddr} ${sbfhdr};" \
- "tftp " MK_STR(CFG_LOAD_ADDR2) " ${uboot} \0" \
+ "tftp " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \
"upd=run load; run prog\0" \
"prog=sf probe 0:1 10000 1;" \
"sf erase 0 30000;" \
@@ -141,23 +141,23 @@
""
#else
/* Atmel and Intel */
-#ifdef CFG_ATMEL_BOOT
-# define CFG_UBOOT_END 0x0403FFFF
-#elif defined(CFG_INTEL_BOOT)
-# define CFG_UBOOT_END 0x3FFFF
+#ifdef CONFIG_SYS_ATMEL_BOOT
+# define CONFIG_SYS_UBOOT_END 0x0403FFFF
+#elif defined(CONFIG_SYS_INTEL_BOOT)
+# define CONFIG_SYS_UBOOT_END 0x3FFFF
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \
+ "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0" \
"loadaddr=0x40010000\0" \
"uboot=u-boot.bin\0" \
"load=tftp ${loadaddr} ${uboot}\0" \
"upd=run load; run prog\0" \
- "prog=prot off " MK_STR(CFG_FLASH_BASE) \
- " " MK_STR(CFG_UBOOT_END) ";" \
- "era " MK_STR(CFG_FLASH_BASE) " " \
- MK_STR(CFG_UBOOT_END) ";" \
- "cp.b ${loadaddr} " MK_STR(CFG_FLASH_BASE) \
+ "prog=prot off " MK_STR(CONFIG_SYS_FLASH_BASE) \
+ " " MK_STR(CONFIG_SYS_UBOOT_END) ";" \
+ "era " MK_STR(CONFIG_SYS_FLASH_BASE) " " \
+ MK_STR(CONFIG_SYS_UBOOT_END) ";" \
+ "cp.b ${loadaddr} " MK_STR(CONFIG_SYS_FLASH_BASE) \
" ${filesize}; save\0" \
""
#endif
@@ -170,22 +170,22 @@
#define CONFIG_ATAPI
#undef CONFIG_LBA48
-#define CFG_IDE_MAXBUS 1
-#define CFG_IDE_MAXDEVICE 2
+#define CONFIG_SYS_IDE_MAXBUS 1
+#define CONFIG_SYS_IDE_MAXDEVICE 2
-#define CFG_ATA_BASE_ADDR 0x90000000
-#define CFG_ATA_IDE0_OFFSET 0
+#define CONFIG_SYS_ATA_BASE_ADDR 0x90000000
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0
-#define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */
-#define CFG_ATA_STRIDE 4 /* Interval between registers */
+#define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */
+#define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */
#define _IO_BASE 0
/* Realtime clock */
#define CONFIG_MCFRTC
#undef RTC_DEBUG
-#define CFG_RTC_OSCILLATOR (32 * CFG_HZ)
+#define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ)
/* Timer */
#define CONFIG_MCFTMR
@@ -195,21 +195,21 @@
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CFG_I2C_SPEED 80000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_OFFSET 0x58000
-#define CFG_IMMR CFG_MBAR
+#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x58000
+#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
/* DSPI and Serial Flash */
#define CONFIG_CF_DSPI
#define CONFIG_HARD_SPI
-#define CFG_SER_FLASH_BASE 0x01000000
-#define CFG_SBFHDR_SIZE 0x13
+#define CONFIG_SYS_SER_FLASH_BASE 0x01000000
+#define CONFIG_SYS_SBFHDR_SIZE 0x13
#ifdef CONFIG_CMD_SPI
# define CONFIG_SPI_FLASH
# define CONFIG_SPI_FLASH_STMICRO
-# define CFG_DSPI_DCTAR0 (DSPI_DCTAR_TRSZ(7) | \
+# define CONFIG_SYS_DSPI_DCTAR0 (DSPI_DCTAR_TRSZ(7) | \
DSPI_DCTAR_CPOL | \
DSPI_DCTAR_CPHA | \
DSPI_DCTAR_PCSSCK_1CLK | \
@@ -228,27 +228,27 @@
#define CONFIG_PCI_PNP 1
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
-#define CFG_PCI_CACHE_LINE_SIZE 4
+#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 4
-#define CFG_PCI_MEM_BUS 0xA0000000
-#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS
-#define CFG_PCI_MEM_SIZE 0x10000000
+#define CONFIG_SYS_PCI_MEM_BUS 0xA0000000
+#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS
+#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000
-#define CFG_PCI_IO_BUS 0xB1000000
-#define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS
-#define CFG_PCI_IO_SIZE 0x01000000
+#define CONFIG_SYS_PCI_IO_BUS 0xB1000000
+#define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS
+#define CONFIG_SYS_PCI_IO_SIZE 0x01000000
-#define CFG_PCI_CFG_BUS 0xB0000000
-#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS
-#define CFG_PCI_CFG_SIZE 0x01000000
+#define CONFIG_SYS_PCI_CFG_BUS 0xB0000000
+#define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS
+#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000
#endif
/* FPGA - Spartan 2 */
/* experiment
-#define CONFIG_FPGA CFG_SPARTAN3
+#define CONFIG_FPGA CONFIG_SYS_SPARTAN3
#define CONFIG_FPGA_COUNT 1
-#define CFG_FPGA_PROG_FEEDBACK
-#define CFG_FPGA_CHECK_CTRLC
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_CHECK_CTRLC
*/
/* Input, PCI, Flexbus, and VCO */
@@ -256,23 +256,23 @@
#define CONFIG_PRAM 2048 /* 2048 KB */
-#define CFG_PROMPT "-> "
-#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "-> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x10000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)
-#define CFG_HZ 1000
+#define CONFIG_SYS_HZ 1000
-#define CFG_MBAR 0xFC000000
+#define CONFIG_SYS_MBAR 0xFC000000
/*
* Low Level Configuration Settings
@@ -283,40 +283,40 @@
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
-#define CFG_INIT_RAM_ADDR 0x80000000
-#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */
-#define CFG_INIT_RAM_CTRL 0x221
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 32)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_SBFHDR_DATA_OFFSET (CFG_INIT_RAM_END - 32)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
+#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL 0x221
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - 32)
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x40000000
-#define CFG_SDRAM_BASE1 0x48000000
-#define CFG_SDRAM_SIZE 256 /* SDRAM size in MB */
-#define CFG_SDRAM_CFG1 0x65311610
-#define CFG_SDRAM_CFG2 0x59670000
-#define CFG_SDRAM_CTRL 0xEA0B2000
-#define CFG_SDRAM_EMOD 0x40010000
-#define CFG_SDRAM_MODE 0x00010033
-#define CFG_SDRAM_DRV_STRENGTH 0xAA
-
-#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400
-#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_SDRAM_BASE1 0x48000000
+#define CONFIG_SYS_SDRAM_SIZE 256 /* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_CFG1 0x65311610
+#define CONFIG_SYS_SDRAM_CFG2 0x59670000
+#define CONFIG_SYS_SDRAM_CTRL 0xEA0B2000
+#define CONFIG_SYS_SDRAM_EMOD 0x40010000
+#define CONFIG_SYS_SDRAM_MODE 0x00010033
+#define CONFIG_SYS_SDRAM_DRV_STRENGTH 0xAA
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
#ifdef CONFIG_CF_SBF
-# define CFG_MONITOR_BASE (TEXT_BASE + 0x400)
+# define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400)
#else
-# define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#endif
-#define CFG_BOOTPARAMS_LEN 64*1024
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
/*
* For booting Linux, the board info and command line data
@@ -324,7 +324,7 @@
* the maximum mapped by the Linux kernel during initialization ??
*/
/* Initial Memory map for Linux */
-#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
/*
* Configuration for environment
@@ -342,49 +342,49 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#ifdef CFG_STMICRO_BOOT
-# define CFG_FLASH_BASE CFG_SER_FLASH_BASE
-# define CFG_FLASH0_BASE CFG_SER_FLASH_BASE
-# define CFG_FLASH1_BASE CFG_CS0_BASE
-# define CFG_FLASH2_BASE CFG_CS1_BASE
+#ifdef CONFIG_SYS_STMICRO_BOOT
+# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_SER_FLASH_BASE
+# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_SER_FLASH_BASE
+# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS0_BASE
+# define CONFIG_SYS_FLASH2_BASE CONFIG_SYS_CS1_BASE
# define CONFIG_ENV_OFFSET 0x30000
# define CONFIG_ENV_SIZE 0x2000
# define CONFIG_ENV_SECT_SIZE 0x10000
#endif
-#ifdef CFG_ATMEL_BOOT
-# define CFG_FLASH_BASE CFG_CS0_BASE
-# define CFG_FLASH0_BASE CFG_CS0_BASE
-# define CFG_FLASH1_BASE CFG_CS1_BASE
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0x4000)
+#ifdef CONFIG_SYS_ATMEL_BOOT
+# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
+# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE
+# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000)
# define CONFIG_ENV_SECT_SIZE 0x2000
#endif
-#ifdef CFG_INTEL_BOOT
-# define CFG_FLASH_BASE CFG_CS0_BASE
-# define CFG_FLASH0_BASE CFG_CS0_BASE
-# define CFG_FLASH1_BASE CFG_CS1_BASE
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0x40000)
+#ifdef CONFIG_SYS_INTEL_BOOT
+# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
+# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE
+# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
# define CONFIG_ENV_SIZE 0x2000
# define CONFIG_ENV_SECT_SIZE 0x20000
#endif
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
# define CONFIG_FLASH_CFI_DRIVER 1
-# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */
-# define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
-# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
-# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-# define CFG_FLASH_CHECKSUM
-# define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE }
+# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */
+# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+# define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
+# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
+# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+# define CONFIG_SYS_FLASH_CHECKSUM
+# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
# define CONFIG_FLASH_CFI_LEGACY
#ifdef CONFIG_FLASH_CFI_LEGACY
-# define CFG_ATMEL_REGION 4
-# define CFG_ATMEL_TOTALSECT 11
-# define CFG_ATMEL_SECT {1, 2, 1, 7}
-# define CFG_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000}
+# define CONFIG_SYS_ATMEL_REGION 4
+# define CONFIG_SYS_ATMEL_TOTALSECT 11
+# define CONFIG_SYS_ATMEL_SECT {1, 2, 1, 7}
+# define CONFIG_SYS_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000}
#endif
#endif
@@ -396,24 +396,24 @@
#ifdef CF_STMICRO_BOOT
# define CONFIG_JFFS2_DEV "nor1"
# define CONFIG_JFFS2_PART_SIZE 0x01000000
-# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH2_BASE + 0x500000)
+# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH2_BASE + 0x500000)
#endif
-#ifdef CFG_ATMEL_BOOT
+#ifdef CONFIG_SYS_ATMEL_BOOT
# define CONFIG_JFFS2_DEV "nor1"
# define CONFIG_JFFS2_PART_SIZE 0x01000000
-# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH1_BASE + 0x500000)
+# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH1_BASE + 0x500000)
#endif
-#ifdef CFG_INTEL_BOOT
+#ifdef CONFIG_SYS_INTEL_BOOT
# define CONFIG_JFFS2_DEV "nor0"
# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000)
-# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH0_BASE + 0x500000)
+# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
#endif
#endif
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 16
+#define CONFIG_SYS_CACHELINE_SIZE 16
/*-----------------------------------------------------------------------
* Memory bank definitions
@@ -427,38 +427,38 @@
* CS5 - Available
*/
-#if defined(CFG_ATMEL_BOOT) || defined(CFG_STMICRO_BOOT)
+#if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT)
/* Atmel Flash */
-#define CFG_CS0_BASE 0x04000000
-#define CFG_CS0_MASK 0x00070001
-#define CFG_CS0_CTRL 0x00001140
+#define CONFIG_SYS_CS0_BASE 0x04000000
+#define CONFIG_SYS_CS0_MASK 0x00070001
+#define CONFIG_SYS_CS0_CTRL 0x00001140
/* Intel Flash */
-#define CFG_CS1_BASE 0x00000000
-#define CFG_CS1_MASK 0x01FF0001
-#define CFG_CS1_CTRL 0x00000D60
+#define CONFIG_SYS_CS1_BASE 0x00000000
+#define CONFIG_SYS_CS1_MASK 0x01FF0001
+#define CONFIG_SYS_CS1_CTRL 0x00000D60
-#define CFG_ATMEL_BASE CFG_CS0_BASE
+#define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS0_BASE
#else
/* Intel Flash */
-#define CFG_CS0_BASE 0x00000000
-#define CFG_CS0_MASK 0x01FF0001
-#define CFG_CS0_CTRL 0x00000D60
+#define CONFIG_SYS_CS0_BASE 0x00000000
+#define CONFIG_SYS_CS0_MASK 0x01FF0001
+#define CONFIG_SYS_CS0_CTRL 0x00000D60
/* Atmel Flash */
-#define CFG_CS1_BASE 0x04000000
-#define CFG_CS1_MASK 0x00070001
-#define CFG_CS1_CTRL 0x00001140
+#define CONFIG_SYS_CS1_BASE 0x04000000
+#define CONFIG_SYS_CS1_MASK 0x00070001
+#define CONFIG_SYS_CS1_CTRL 0x00001140
-#define CFG_ATMEL_BASE CFG_CS1_BASE
+#define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS1_BASE
#endif
/* CPLD */
-#define CFG_CS2_BASE 0x08000000
-#define CFG_CS2_MASK 0x00070001
-#define CFG_CS2_CTRL 0x003f1140
+#define CONFIG_SYS_CS2_BASE 0x08000000
+#define CONFIG_SYS_CS2_MASK 0x00070001
+#define CONFIG_SYS_CS2_CTRL 0x003f1140
/* FPGA */
-#define CFG_CS3_BASE 0x09000000
-#define CFG_CS3_MASK 0x00070001
-#define CFG_CS3_CTRL 0x00000020
+#define CONFIG_SYS_CS3_BASE 0x09000000
+#define CONFIG_SYS_CS3_MASK 0x00070001
+#define CONFIG_SYS_CS3_CTRL 0x00000020
#endif /* _M54455EVB_H */