summaryrefslogtreecommitdiff
path: root/include/configs/MVBLUE.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/MVBLUE.h')
-rw-r--r--include/configs/MVBLUE.h214
1 files changed, 107 insertions, 107 deletions
diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h
index 2518dbe..31b9f03 100644
--- a/include/configs/MVBLUE.h
+++ b/include/configs/MVBLUE.h
@@ -63,7 +63,7 @@
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOT_RETRY_TIME -1
@@ -117,14 +117,14 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS 16 /* Max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */
#define CONFIG_BOOTCOMMAND "run nfsboot"
#define CONFIG_BOOTARGS "root=/dev/mtdblock5 ro rootfstype=jffs2"
@@ -168,54 +168,54 @@
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CFG_FLASH_BASE 0xFFF00000
-#define CFG_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE 0xFFF00000
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CFG_RESET_ADDRESS 0xFFF00100
-#define CFG_EUMB_ADDR 0xFC000000
+#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
+#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-#define CFG_MONITOR_LEN 0x00100000
-#define CFG_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */
+#define CONFIG_SYS_MONITOR_LEN 0x00100000
+#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */
-#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
-#define CFG_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */
/* Maximum amount of RAM. */
-#define CFG_MAX_RAM_SIZE 0x10000000 /* 0 .. 256MB of (S)DRAM */
+#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 0 .. 256MB of (S)DRAM */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
#else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
#endif
-#define CFG_ISA_IO 0xFE000000
+#define CONFIG_SYS_ISA_IO 0xFE000000
/*
* serial configuration
*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CFG_NS16550_CLK get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600)
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area
*/
-#define CFG_INIT_RAM_ADDR 0x40000000
-#define CFG_INIT_RAM_END 0x1000
-#define CFG_GBL_DATA_SIZE 128
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
+#define CONFIG_SYS_INIT_RAM_END 0x1000
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
/*
* Low Level Configuration Settings
@@ -225,35 +225,35 @@
*/
#define CONFIG_SYS_CLK_FREQ 33000000
-#define CFG_HZ 10000
+#define CONFIG_SYS_HZ 10000
/* Bit-field values for MCCR1. */
-#define CFG_ROMNAL 7
-#define CFG_ROMFAL 11
+#define CONFIG_SYS_ROMNAL 7
+#define CONFIG_SYS_ROMFAL 11
/* Bit-field values for MCCR2. */
-#define CFG_TSWAIT 0x5
-#define CFG_REFINT 430
+#define CONFIG_SYS_TSWAIT 0x5
+#define CONFIG_SYS_REFINT 430
/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
-#define CFG_BSTOPRE 121
+#define CONFIG_SYS_BSTOPRE 121
/* Bit-field values for MCCR3. */
-#define CFG_REFREC 8
+#define CONFIG_SYS_REFREC 8
/* Bit-field values for MCCR4. */
-#define CFG_PRETOACT 3
-#define CFG_ACTTOPRE 5
-#define CFG_ACTORW 3
-#define CFG_SDMODE_CAS_LAT 3
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM 1
-#define CFG_REGDIMM 0
-#define CFG_DBUS_SIZE2 1
-#define CFG_SDMODE_WRAP 0
-
-#define CFG_PGMAX 0x32
-#define CFG_SDRAM_DSCD 0x20
+#define CONFIG_SYS_PRETOACT 3
+#define CONFIG_SYS_ACTTOPRE 5
+#define CONFIG_SYS_ACTORW 3
+#define CONFIG_SYS_SDMODE_CAS_LAT 3
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM 1
+#define CONFIG_SYS_REGDIMM 0
+#define CONFIG_SYS_DBUS_SIZE2 1
+#define CONFIG_SYS_SDMODE_WRAP 0
+
+#define CONFIG_SYS_PGMAX 0x32
+#define CONFIG_SYS_SDRAM_DSCD 0x20
/* Memory bank settings.
* Only bits 20-29 are actually used from these vales to set the
@@ -262,70 +262,70 @@
* address. Refer to the MPC8240 book.
*/
-#define CFG_BANK0_START 0x00000000
-#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE 1
-#define CFG_BANK1_START 0x3ff00000
-#define CFG_BANK1_END 0x3fffffff
-#define CFG_BANK1_ENABLE 0
-#define CFG_BANK2_START 0x3ff00000
-#define CFG_BANK2_END 0x3fffffff
-#define CFG_BANK2_ENABLE 0
-#define CFG_BANK3_START 0x3ff00000
-#define CFG_BANK3_END 0x3fffffff
-#define CFG_BANK3_ENABLE 0
-#define CFG_BANK4_START 0x3ff00000
-#define CFG_BANK4_END 0x3fffffff
-#define CFG_BANK4_ENABLE 0
-#define CFG_BANK5_START 0x3ff00000
-#define CFG_BANK5_END 0x3fffffff
-#define CFG_BANK5_ENABLE 0
-#define CFG_BANK6_START 0x3ff00000
-#define CFG_BANK6_END 0x3fffffff
-#define CFG_BANK6_ENABLE 0
-#define CFG_BANK7_START 0x3ff00000
-#define CFG_BANK7_END 0x3fffffff
-#define CFG_BANK7_ENABLE 0
-
-#define CFG_ODCR 0xff
-
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L CFG_IBAT0L
-#define CFG_DBAT0U CFG_IBAT0U
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_BANK0_START 0x00000000
+#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE 1
+#define CONFIG_SYS_BANK1_START 0x3ff00000
+#define CONFIG_SYS_BANK1_END 0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE 0
+#define CONFIG_SYS_BANK2_START 0x3ff00000
+#define CONFIG_SYS_BANK2_END 0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE 0
+#define CONFIG_SYS_BANK3_START 0x3ff00000
+#define CONFIG_SYS_BANK3_END 0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE 0
+#define CONFIG_SYS_BANK4_START 0x3ff00000
+#define CONFIG_SYS_BANK4_END 0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE 0
+#define CONFIG_SYS_BANK5_START 0x3ff00000
+#define CONFIG_SYS_BANK5_END 0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE 0
+#define CONFIG_SYS_BANK6_START 0x3ff00000
+#define CONFIG_SYS_BANK6_END 0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE 0
+#define CONFIG_SYS_BANK7_START 0x3ff00000
+#define CONFIG_SYS_BANK7_END 0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE 0
+
+#define CONFIG_SYS_ODCR 0xff
+
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#undef CFG_FLASH_PROTECTION
-#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CFG_MAX_FLASH_SECT 63 /* Max number of sectors per flash */
+#undef CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 63 /* Max number of sectors per flash */
-#define CFG_FLASH_ERASE_TOUT 12000
-#define CFG_FLASH_WRITE_TOUT 1000
+#define CONFIG_SYS_FLASH_ERASE_TOUT 12000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 1000
#define CONFIG_ENV_IS_IN_FLASH
@@ -337,9 +337,9 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 32
+#define CONFIG_SYS_CACHELINE_SIZE 32
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*