summaryrefslogtreecommitdiff
path: root/include/configs/NETTA.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/NETTA.h')
-rw-r--r--include/configs/NETTA.h99
1 files changed, 0 insertions, 99 deletions
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 724e807..dda6179 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -616,105 +616,6 @@
#define ER_BASE 0xF1020000
#define DUMMY_BASE 0xF1FF0000
-/****************************************************************/
-
-/* NAND */
-#define CONFIG_NAND_LEGACY
-#define CONFIG_SYS_NAND_BASE NAND_BASE
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_MTD_NAND_UNSAFE
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-/* #define NAND_NO_RB */
-
-#define SECTORSIZE 512
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-#define NAND_ChipID_UNKNOWN 0x00
-#define NAND_MAX_FLOORS 1
-
-/* ALE = PD3, CLE = PD4, CE = PD5, F_RY_BY = PC13 */
-#define NAND_DISABLE_CE(nand) \
- do { \
- (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |= (1 << (15 - 5)); \
- } while(0)
-
-#define NAND_ENABLE_CE(nand) \
- do { \
- (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 5)); \
- } while(0)
-
-#define NAND_CTL_CLRALE(nandptr) \
- do { \
- (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 3)); \
- } while(0)
-
-#define NAND_CTL_SETALE(nandptr) \
- do { \
- (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |= (1 << (15 - 3)); \
- } while(0)
-
-#define NAND_CTL_CLRCLE(nandptr) \
- do { \
- (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 4)); \
- } while(0)
-
-#define NAND_CTL_SETCLE(nandptr) \
- do { \
- (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |= (1 << (15 - 4)); \
- } while(0)
-
-#ifndef NAND_NO_RB
-#define NAND_WAIT_READY(nand) \
- do { \
- while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 13))) == 0) { \
- WATCHDOG_RESET(); \
- } \
- } while (0)
-#else
-#define NAND_WAIT_READY(nand) udelay(12)
-#endif
-
-#define WRITE_NAND_COMMAND(d, adr) \
- do { \
- *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
- } while(0)
-
-#define WRITE_NAND_ADDRESS(d, adr) \
- do { \
- *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
- } while(0)
-
-#define WRITE_NAND(d, adr) \
- do { \
- *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
- } while(0)
-
-#define READ_NAND(adr) \
- ((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
-
-#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
-#define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nand0"
-#define CONFIG_JFFS2_PART_SIZE 0x00100000
-#define CONFIG_JFFS2_PART_OFFSET 0x00200000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nand0=netta-nand"
-#define MTDPARTS_DEFAULT "mtdparts=netta-nand:1m@2m(jffs2)"
-*/
-
/*****************************************************************************/
#define CONFIG_SYS_DIRECT_FLASH_TFTP