summaryrefslogtreecommitdiff
path: root/include/configs/RPXClassic.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/RPXClassic.h')
-rw-r--r--include/configs/RPXClassic.h65
1 files changed, 61 insertions, 4 deletions
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index d742a25..f20b8f9 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -47,13 +47,27 @@
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */
-
/* Define CONFIG_FEC_ENET to use Fast ethernet instead of ethernet on SCC1 */
-#undef CONFIG_FEC_ENET
+#define CONFIG_FEC_ENET
#ifdef CONFIG_FEC_ENET
#define CFG_DISCOVER_PHY 1
+#define CONFIG_MII 1
#endif /* CONFIG_FEC_ENET */
+/* Video console (graphic: Epson SED13806 on ECCX board, no keyboard */
+#if 1
+#define CONFIG_VIDEO_SED13806
+#define CONFIG_NEC_NL6448BC20
+#define CONFIG_VIDEO_SED13806_16BPP
+
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_SW_CURSOR
+#endif
+
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
@@ -168,7 +182,7 @@
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0xFF000000
-#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || (CONFIG_COMMANDS & CFG_CMD_IDE)
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#else
#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
@@ -196,7 +210,8 @@
#if 0
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x20000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x8000
+#define CFG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */
#else
#define CFG_ENV_IS_IN_NVRAM 1
#define CFG_ENV_ADDR 0xfa000100
@@ -353,6 +368,48 @@
#define CFG_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */
#define CFG_OR4_PRELIM 0xFFF80970
+/* ECCX CS settings */
+#define SED13806_OR 0xFFC00108 /* - 4 Mo
+ - Burst inhibit
+ - external TA */
+#define SED13806_REG_ADDR 0xa0000000
+#define SED13806_ACCES 0x801 /* 16 bit access */
+
+
+/* Global definitions for the ECCX board */
+#define ECCX_CSR_ADDR (0xfac00000)
+#define ECCX_CSR8_OFFSET (0x8)
+#define ECCX_CSR11_OFFSET (0xB)
+#define ECCX_CSR12_OFFSET (0xC)
+
+#define ECCX_CSR8 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR8_OFFSET)
+#define ECCX_CSR11 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR11_OFFSET)
+#define ECCX_CSR12 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR12_OFFSET)
+
+
+#define REG_GPIO_CTRL 0x008
+
+/* Definitions for CSR8 */
+#define ECCX_ENEPSON 0x80 /* Bit 0:
+ 0= disable and reset SED1386
+ 1= enable SED1386 */
+/* Bit 1: 0= SED1386 in Big Endian mode */
+/* 1= SED1386 in little endian mode */
+#define ECCX_LE 0x40
+#define ECCX_BE 0x00
+
+/* Bit 2,3: Selection */
+/* 00 = Disabled */
+/* 01 = CS2 is used for the SED1386 */
+/* 10 = CS5 is used for the SED1386 */
+/* 11 = reserved */
+#define ECCX_CS2 0x10
+#define ECCX_CS5 0x20
+
+/* Definitions for CSR12 */
+#define ECCX_ID 0x02
+#define ECCX_860 0x01
+
/*
* Memory Periodic Timer Prescaler
*/