summaryrefslogtreecommitdiff
path: root/include/configs/TOP5200.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/TOP5200.h')
-rw-r--r--include/configs/TOP5200.h194
1 files changed, 97 insertions, 97 deletions
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 3818368..046948e 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -45,7 +45,7 @@
#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */
#define CONFIG_TOP5200 1 /* ... on TOP5200 board - we need this for FEC.C */
-#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
@@ -57,7 +57,7 @@
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
#define CONFIG_BAUDRATE 9600 /* ... at 9600 bps */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200)
@@ -139,8 +139,8 @@
* MUST be low boot - HIGHBOOT is not supported anymore
*/
#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
-# define CFG_LOWBOOT 1
-# define CFG_LOWBOOT16 1
+# define CONFIG_SYS_LOWBOOT 1
+# define CONFIG_SYS_LOWBOOT16 1
#else
# error "TEXT_BASE must be 0xff000000"
#endif
@@ -178,7 +178,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
/*
* I2C configuration
@@ -186,11 +186,11 @@
/*
* EEPROM configuration
*/
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_EEPROM_SIZE 0x2000
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_SIZE 0x2000
#define CONFIG_ENV_OVERWRITE
#define CONFIG_MISC_INIT_R
@@ -201,11 +201,11 @@
#if defined (CONFIG_SOFT_I2C)
# define SDA0 0x40
# define SCL0 0x80
-# define GPIOE0 *((volatile uchar*)(CFG_MBAR+0x0c00))
-# define DDR0 *((volatile uchar*)(CFG_MBAR+0x0c08))
-# define DVO0 *((volatile uchar*)(CFG_MBAR+0x0c0c))
-# define DVI0 *((volatile uchar*)(CFG_MBAR+0x0c20))
-# define ODE0 *((volatile uchar*)(CFG_MBAR+0x0c04))
+# define GPIOE0 *((volatile uchar*)(CONFIG_SYS_MBAR+0x0c00))
+# define DDR0 *((volatile uchar*)(CONFIG_SYS_MBAR+0x0c08))
+# define DVO0 *((volatile uchar*)(CONFIG_SYS_MBAR+0x0c0c))
+# define DVI0 *((volatile uchar*)(CONFIG_SYS_MBAR+0x0c20))
+# define ODE0 *((volatile uchar*)(CONFIG_SYS_MBAR+0x0c04))
# define I2C_INIT {GPIOE0|=(SDA0|SCL0);ODE0|=(SDA0|SCL0);DVO0|=(SDA0|SCL0);DDR0|=(SDA0|SCL0);}
# define I2C_READ ((DVI0&SDA0)?1:0)
# define I2C_SDA(x) {if(x)DVO0|=SDA0;else DVO0&=~SDA0;}
@@ -213,32 +213,32 @@
# define I2C_DELAY {udelay(5);}
# define I2C_ACTIVE {DDR0|=SDA0;}
# define I2C_TRISTATE {DDR0&=~SDA0;}
-# define CFG_I2C_SPEED 100000
-# define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_EEPROM_ADDR 0x57
-#define CFG_I2C_FACT_ADDR 0x57
+# define CONFIG_SYS_I2C_SPEED 100000
+# define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_I2C_FACT_ADDR 0x57
#endif
#if defined (CONFIG_HARD_I2C)
-# define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
-# define CFG_I2C_SPEED 100000 /* 100 kHz */
-# define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_EEPROM_ADDR 0x54
-#define CFG_I2C_FACT_ADDR 0x54
+# define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
+# define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
+# define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
+#define CONFIG_SYS_I2C_FACT_ADDR 0x54
#endif
/*
* Flash configuration, expect one 16 Megabyte Bank at most
*/
-#define CFG_FLASH_BASE 0xff000000
-#define CFG_FLASH_SIZE 0x01000000
-#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
-#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0)
+#define CONFIG_SYS_FLASH_BASE 0xff000000
+#define CONFIG_SYS_FLASH_SIZE 0x01000000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0)
-#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */
-#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
#undef CONFIG_FLASH_16BIT /* Flash is 8-bit */
@@ -247,25 +247,25 @@
*/
#if 0
/* 2x MT48LC16M16A2 - 7.0 ns SDRAMS = 64 MegaBytes Total */
-#define CFG_DRAM_DDR 0
-#define CFG_DRAM_EMODE 0
-#define CFG_DRAM_MODE 0x008D
-#define CFG_DRAM_CONTROL 0x514F0000
-#define CFG_DRAM_CONFIG1 0xC2233A00
-#define CFG_DRAM_CONFIG2 0x88B70004
-#define CFG_DRAM_TAP_DEL 0x08
-#define CFG_DRAM_RAM_SIZE 0x19
+#define CONFIG_SYS_DRAM_DDR 0
+#define CONFIG_SYS_DRAM_EMODE 0
+#define CONFIG_SYS_DRAM_MODE 0x008D
+#define CONFIG_SYS_DRAM_CONTROL 0x514F0000
+#define CONFIG_SYS_DRAM_CONFIG1 0xC2233A00
+#define CONFIG_SYS_DRAM_CONFIG2 0x88B70004
+#define CONFIG_SYS_DRAM_TAP_DEL 0x08
+#define CONFIG_SYS_DRAM_RAM_SIZE 0x19
#endif
#if 1
/* 2x MT48LC16M16A2 - 7.5 ns SDRAMS = 64 MegaBytes Total */
-#define CFG_DRAM_DDR 0
-#define CFG_DRAM_EMODE 0
-#define CFG_DRAM_MODE 0x00CD
-#define CFG_DRAM_CONTROL 0x514F0000
-#define CFG_DRAM_CONFIG1 0xD2333A00
-#define CFG_DRAM_CONFIG2 0x8AD70004
-#define CFG_DRAM_TAP_DEL 0x08
-#define CFG_DRAM_RAM_SIZE 0x19
+#define CONFIG_SYS_DRAM_DDR 0
+#define CONFIG_SYS_DRAM_EMODE 0
+#define CONFIG_SYS_DRAM_MODE 0x00CD
+#define CONFIG_SYS_DRAM_CONTROL 0x514F0000
+#define CONFIG_SYS_DRAM_CONFIG1 0xD2333A00
+#define CONFIG_SYS_DRAM_CONFIG2 0x8AD70004
+#define CONFIG_SYS_DRAM_TAP_DEL 0x08
+#define CONFIG_SYS_DRAM_RAM_SIZE 0x19
#endif
/*
@@ -278,35 +278,35 @@
/*
* VPD settings
*/
-#define CFG_FACT_OFFSET 0x1800
-#define CFG_FACT_SIZE 0x0800
+#define CONFIG_SYS_FACT_OFFSET 0x1800
+#define CONFIG_SYS_FACT_SIZE 0x0800
/*
* Memory map
*
* Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000
*/
-#define CFG_MBAR 0xf0000000 /* DO NOT CHANGE this */
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_DEFAULT_MBAR 0x80000000
+#define CONFIG_SYS_MBAR 0xf0000000 /* DO NOT CHANGE this */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
/* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
-#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CFG_MONITOR_BASE TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-# define CFG_RAMBOOT 1
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+# define CONFIG_SYS_RAMBOOT 1
#endif
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Ethernet configuration
@@ -321,32 +321,32 @@
* PCI disabled
* Ethernet 100 with MD
*/
-#define CFG_GPS_PORT_CONFIG 0x00058044
+#define CONFIG_SYS_GPS_PORT_CONFIG 0x00058044
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
-# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
-#define CFG_MEMTEST_END 0x01f00000 /* 1 ... 31 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x01f00000 /* 1 ... 31 MB in DRAM */
-#define CFG_LOAD_ADDR 0x200000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -354,12 +354,12 @@
#define CONFIG_RTC_MK48T59 1 /* use M48T08 on EVAL5200 */
#define RTC(reg) (0xf0010000+reg)
/* setup CS2 for M48T08. Must MAP 64kB */
- #define CFG_CS2_START RTC(0)
- #define CFG_CS2_SIZE 0x10000
+ #define CONFIG_SYS_CS2_START RTC(0)
+ #define CONFIG_SYS_CS2_SIZE 0x10000
/* setup CS2 configuration register: */
/* WaitP = 0, WaitX = 4, MX=0, AL=1, AA=1, CE=1 */
/* AS=2, DS=0, Bank=0, WTyp=0, WS=0, RS=0, WO=0, RO=0 */
- #define CFG_CS2_CFG 0x00047800
+ #define CONFIG_SYS_CS2_CFG 0x00047800
#else
#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
#endif
@@ -367,19 +367,19 @@
/*
* Various low-level settings
*/
-#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL HID0_ICE
+#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#define CFG_BOOTCS_START CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG 0x00047801
-#define CFG_CS0_START CFG_FLASH_BASE
-#define CFG_CS0_SIZE CFG_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG 0x00047801
+#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
-#define CFG_CS_BURST 0x00000000
-#define CFG_CS_DEADCYCLE 0x33333333
+#define CONFIG_SYS_CS_BURST 0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE 0x33333333
-#define CFG_RESET_ADDRESS 0x7f000000
+#define CONFIG_SYS_RESET_ADDRESS 0x7f000000
/*-----------------------------------------------------------------------
* IDE/ATA stuff Supports IDE harddisk
@@ -394,23 +394,23 @@
#define CONFIG_IDE_RESET 1
#define CONFIG_IDE_PREINIT
-#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-#define CFG_ATA_IDE0_OFFSET 0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
/* Offset for data I/O */
-#define CFG_ATA_DATA_OFFSET (0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
/* Offset for normal register accesses */
-#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
/* Offset for alternate registers */
-#define CFG_ATA_ALT_OFFSET (0x005c)
+#define CONFIG_SYS_ATA_ALT_OFFSET (0x005c)
/* Interval between registers */
-#define CFG_ATA_STRIDE 4
+#define CONFIG_SYS_ATA_STRIDE 4
#endif /* __CONFIG_H */