summaryrefslogtreecommitdiff
path: root/include/configs/TOP860.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/TOP860.h')
-rw-r--r--include/configs/TOP860.h144
1 files changed, 72 insertions, 72 deletions
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index b270832..8c2befb 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -60,7 +60,7 @@
* CLOCK settings
*/
#define CONFIG_SYSCLK 49152000
-#define CFG_XTAL 32768
+#define CONFIG_SYS_XTAL 32768
#define CONFIG_EBDF 1
#define CONFIG_COM 3
#define CONFIG_RTC_MPC8xx
@@ -68,32 +68,32 @@
/*-----------------------------------------------------------------------
* Physical memory map as defined by EMK
*/
-#define CFG_IMMR 0xFFF00000 /* Internal Memory Mapped Register */
-#define CFG_FLASH_BASE 0x80000000 /* FLASH in final mapping */
-#define CFG_DRAM_BASE 0x00000000 /* DRAM in final mapping */
-#define CFG_FLASH_MAX 0x00400000 /* max FLASH to expect */
-#define CFG_DRAM_MAX 0x01000000 /* max DRAM to expect */
+#define CONFIG_SYS_IMMR 0xFFF00000 /* Internal Memory Mapped Register */
+#define CONFIG_SYS_FLASH_BASE 0x80000000 /* FLASH in final mapping */
+#define CONFIG_SYS_DRAM_BASE 0x00000000 /* DRAM in final mapping */
+#define CONFIG_SYS_FLASH_MAX 0x00400000 /* max FLASH to expect */
+#define CONFIG_SYS_DRAM_MAX 0x01000000 /* max DRAM to expect */
/*-----------------------------------------------------------------------
* derived values
*/
-#define CFG_MF (CONFIG_SYSCLK/CFG_XTAL)
-#define CFG_CPUCLOCK CONFIG_SYSCLK
-#define CFG_BRGCLOCK CONFIG_SYSCLK
-#define CFG_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF)
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_MF (CONFIG_SYSCLK/CONFIG_SYS_XTAL)
+#define CONFIG_SYS_CPUCLOCK CONFIG_SYSCLK
+#define CONFIG_SYS_BRGCLOCK CONFIG_SYSCLK
+#define CONFIG_SYS_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF)
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_8xx_GCLK_FREQ CONFIG_SYSCLK
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
/*-----------------------------------------------------------------------
* Command interpreter
@@ -105,7 +105,7 @@
/*
* Allow partial commands to be matched to uniqueness.
*/
-#define CFG_MATCH_PARTIAL_CMD
+#define CONFIG_SYS_MATCH_PARTIAL_CMD
/*
@@ -126,34 +126,34 @@
#define CONFIG_AUTOSCRIPT 1
-#define CFG_LOADS_BAUD_CHANGE 1
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
#undef CONFIG_LOADS_ECHO /* NO echo on for serial download */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#undef CFG_HUSH_PARSER /* Hush parse for U-Boot */
+#undef CONFIG_SYS_HUSH_PARSER /* Hush parse for U-Boot */
-#ifdef CFG_HUSH_PARSER
- #define CFG_PROMPT_HUSH_PS2 "> "
+#ifdef CONFIG_SYS_HUSH_PARSER
+ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif
#if defined(CONFIG_CMD_KGDB)
- #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
- #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
/*-----------------------------------------------------------------------
* Memory Test Command
*/
-#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
/*-----------------------------------------------------------------------
* Environment handler
@@ -163,16 +163,16 @@
#define CONFIG_ENV_IS_IN_EEPROM 1 /* turn on EEPROM env feature */
#define CONFIG_ENV_OFFSET 0x1000
#define CONFIG_ENV_SIZE 0x0700
-#define CFG_I2C_EEPROM_ADDR 0x57
-#define CFG_FACT_OFFSET 0x1800
-#define CFG_FACT_SIZE 0x0800
-#define CFG_I2C_FACT_ADDR 0x57
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_EEPROM_SIZE 0x2000
-#define CFG_I2C_SPEED 100000
-#define CFG_I2C_SLAVE 0xFE
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 12
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_FACT_OFFSET 0x1800
+#define CONFIG_SYS_FACT_SIZE 0x0800
+#define CONFIG_SYS_I2C_FACT_ADDR 0x57
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_SIZE 0x2000
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 0xFE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12
#define CONFIG_ENV_OVERWRITE
#define CONFIG_MISC_INIT_R
@@ -195,7 +195,7 @@
#define I2C_TRISTATE { __I2C_DIR &= ~SDA; }
#endif
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*-----------------------------------------------------------------------
* defines we need to get FEC running
@@ -203,7 +203,7 @@
#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
#define CONFIG_FEC_ENET 1 /* Ethernet only via FEC */
#define FEC_ENET 1 /* eth.c needs it that way... */
-#define CFG_DISCOVER_PHY 1
+#define CONFIG_SYS_DISCOVER_PHY 1
#define CONFIG_MII 1
#define CONFIG_MII_INIT 1
#define CONFIG_PHY_ADDR 31
@@ -211,35 +211,35 @@
/*-----------------------------------------------------------------------
* adresses
*/
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_FLASH_BASE 0x80000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_FLASH_BASE 0x80000000
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
-#define CFG_INIT_RAM_ADDR CFG_IMMR
-#define CFG_INIT_RAM_END 0x2f00 /* End of used area in DPRAM */
-#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */
-#define CFG_INIT_VPD_OFFSET (CFG_GBL_DATA_OFFSET - CFG_INIT_VPD_SIZE)
-#define CFG_INIT_SP_OFFSET (CFG_INIT_VPD_OFFSET-8)
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END 0x2f00 /* End of used area in DPRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */
+#define CONFIG_SYS_INIT_VPD_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_VPD_OFFSET-8)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
/* Interrupt level assignments.
@@ -259,7 +259,7 @@
*-----------------------------------------------------------------------
*
*/
-#define CFG_DER 0 /* used in start.S */
+#define CONFIG_SYS_DER 0 /* used in start.S */
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
@@ -279,7 +279,7 @@
* 1 FIOPD 0 Force I/O pull down
* 5 0 00000
*/
-#define CFG_PLPRCR (PLPRCR_TEXPS | ((CFG_MF-1)<<20))
+#define CONFIG_SYS_PLPRCR (PLPRCR_TEXPS | ((CONFIG_SYS_MF-1)<<20))
/*-----------------------------------------------------------------------
* SYPCR - System Protection Control 11-9
@@ -296,10 +296,10 @@
* 1 SWP 0/1 Software watchdog prescale (1=/2048)
*/
#if defined (CONFIG_WATCHDOG)
- #define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
#else
- #define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
+ #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
#endif
/*-----------------------------------------------------------------------
@@ -328,21 +328,21 @@
* 1 B3DD 0 Bank 3 double drive
* 4 0 0000
*/
-#define CFG_SIUMCR (SIUMCR_MLRC11)
+#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC11)
/*-----------------------------------------------------------------------
* TBSCR - Time Base Status and Control 11-26
*-----------------------------------------------------------------------
* Clear Reference Interrupt Status, Timebase freezing enabled
*/
-#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
/*-----------------------------------------------------------------------
* PISCR - Periodic Interrupt Status and Control 11-31
*-----------------------------------------------------------------------
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
*/
-#define CFG_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE)
+#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE)
/*-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register 15-27
@@ -367,9 +367,9 @@
*/
#define SCCR_MASK 0
#ifdef CONFIG_EBDF
- #define CFG_SCCR (SCCR_COM11 | SCCR_TBS | SCCR_EBDF01)
+ #define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS | SCCR_EBDF01)
#else
- #define CFG_SCCR (SCCR_COM11 | SCCR_TBS)
+ #define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS)
#endif
/*-----------------------------------------------------------------------
@@ -378,9 +378,9 @@
* Preliminary Values
*/
/* FLASH timing: CSNT=1 ACS=10 BIH=1 SCY=4 SETA=0 TLRX=1 EHTR=1 */
-#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR)
-#define CFG_OR0_PRELIM (-CFG_FLASH_MAX | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR)
+#define CONFIG_SYS_OR0_PRELIM (-CONFIG_SYS_FLASH_MAX | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V )
/*-----------------------------------------------------------------------
* misc
@@ -428,15 +428,15 @@
/*-----------------------------------------------------------------------
* Defaults for Autoscript
*/
-#define CFG_LOAD_ADDR 0x00100000 /* default load address */
-#define CFG_TFTP_LOADADDR 0x00100000
+#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
+#define CONFIG_SYS_TFTP_LOADADDR 0x00100000
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#endif /* __CONFIG_H */