summaryrefslogtreecommitdiff
path: root/include/configs/TQM5200.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/TQM5200.h')
-rw-r--r--include/configs/TQM5200.h46
1 files changed, 23 insertions, 23 deletions
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 65eff42..4b27633 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -79,7 +79,7 @@
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
-#define ADD_PCI_CMD 0 /* CFG_CMD_PCI */
+#define ADD_PCI_CMD 0 /* CFG_CMD_PCI */
#else /* MPC5100 */
@@ -96,10 +96,10 @@
/* USB */
#if 0
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
#else
-#define ADD_USB_CMD 0
+#define ADD_USB_CMD 0
#endif
/* POST support */
@@ -132,7 +132,7 @@
ADD_USB_CMD | \
CFG_CMD_POST_DIAG | \
CFG_CMD_DATE | \
- CFG_CMD_REGINFO | \
+ CFG_CMD_REGINFO | \
CFG_CMD_MII | \
CFG_CMD_PING | \
ADD_IDE_CMD)
@@ -141,7 +141,7 @@
#include <cmd_confdefs.h>
#if (TEXT_BASE == 0xFC000000) /* Boot low */
-# define CFG_LOWBOOT 1
+# define CFG_LOWBOOT 1
#endif
/*
@@ -149,14 +149,14 @@
*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_PREBOOT "echo;" \
+#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#if defined (CONFIG_TQM5200_AA)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
@@ -174,13 +174,13 @@
"load=tftp 200000 $(loadfile)\0" \
"load133=tftp 200000 $(loadfile133)\0" \
"loadfile=u-boot_tqm5200_aa_mkr.bin\0" \
- "loadfile133=u-boot_tqm5200_aa_133_mkr.bin\0" \
+ "loadfile133=u-boot_tqm5200_aa_133_mkr.bin\0" \
"update=protect off 1:0-4; erase 1:0-4; cp.b 200000 0xfc000000 $(filesize); protect on 1:0-4\0" \
"serverip=172.20.5.13\0" \
""
#else
#if defined (CONFIG_TQM5200_AB)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
@@ -198,13 +198,13 @@
"load=tftp 200000 $(loadfile)\0" \
"load133=tftp 200000 $(loadfile133)\0" \
"loadfile=u-boot_tqm5200_ab_mkr.bin\0" \
- "loadfile133=u-boot_tqm5200_ab_133_mkr.bin\0" \
+ "loadfile133=u-boot_tqm5200_ab_133_mkr.bin\0" \
"update=protect off 1:0-1; erase 1:0-1; cp.b 200000 0xfc000000 $(filesize); protect on 1:0-1\0" \
"serverip=172.20.5.13\0" \
""
#else
#if defined (CONFIG_TQM5200_AC)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
@@ -222,7 +222,7 @@
"load=tftp 200000 $(loadfile)\0" \
"load133=tftp 200000 $(loadfile133)\0" \
"loadfile=u-boot_tqm5200_ac_mkr.bin\0" \
- "loadfile133=u-boot_tqm5200_ac_133_mkr.bin\0" \
+ "loadfile133=u-boot_tqm5200_ac_133_mkr.bin\0" \
"update=protect off 1:0-4; erase 1:0-4; cp.b 200000 0xfc000000 $(filesize); protect on 1:0-4\0" \
"serverip=172.20.5.13\0" \
""
@@ -235,7 +235,7 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBSPEED_133 /* define for 133MHz speed */
#if defined(CFG_IPBSPEED_133)
/*
@@ -328,8 +328,8 @@
#endif /* CFG_LOWBOOT */
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
(= chip selects) */
-#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
/*
@@ -387,8 +387,8 @@
* Bit 0 (mask: 0x80000000): 1
* use ALT CAN position: Bits 2-3 (mask: 0x30000000):
* 00 -> No Alternatives, I2C1 is used for onboard EEPROM
- * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard
- * EEPROM
+ * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard
+ * EEPROM
* use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
* use PSC6_1 and PSC6_3 as GPIO: Bits 9:11 (mask: 0x07000000):
* 011 -> PSC6 could not be used as UART or CODEC. IrDA still possible.
@@ -495,12 +495,12 @@
*-----------------------------------------------------------------------
*/
-#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
-#define CONFIG_IDE_RESET /* reset for ide supported */
+#define CONFIG_IDE_RESET /* reset for ide supported */
#define CONFIG_IDE_PREINIT
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
@@ -519,7 +519,7 @@
/* Offset for alternate registers */
#define CFG_ATA_ALT_OFFSET (0x005C)
-/* Interval between registers */
-#define CFG_ATA_STRIDE 4
+/* Interval between registers */
+#define CFG_ATA_STRIDE 4
#endif /* __CONFIG_H */