diff options
Diffstat (limited to 'include/configs/davinci_dm355evm.h')
-rw-r--r-- | include/configs/davinci_dm355evm.h | 195 |
1 files changed, 0 insertions, 195 deletions
diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h deleted file mode 100644 index 72296a0..0000000 --- a/include/configs/davinci_dm355evm.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (C) 2009 David Brownell - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Spectrum Digital TMS320DM355 EVM board */ -#define DAVINCI_DM355EVM - -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SOC_DM355 - -/* Memory Info */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */ - -/* Serial Driver info: UART0 for console */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Ethernet: external DM9000 */ -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x04014000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 2) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ - -/* NAND: socketed, two chipselects, normally 2 GBytes */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K - -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } -/* socket has two chipselects, nCE0 gated by address BIT(14) */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 2 - -/* SD/MMC */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DAVINCI_MMC -#define CONFIG_DAVINCI_MMC_SD1 -#define CONFIG_MMC_MBLOCK - -/* USB: OTG connector */ -/* NYET -- #define CONFIG_USB_DAVINCI */ - -/* U-Boot command configuration */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC -#endif - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#endif - -#ifdef CONFIG_USB_DAVINCI -#define CONFIG_USB_MUSB_HCD -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#else -#undef CONFIG_USB_MUSB_HCD -#undef CONFIG_CMD_USB -#undef CONFIG_USB_STORAGE -#endif - -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* U-Boot general configuration */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE /* Print buffer size */ \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x3C0000 -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_CMD_ENV -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ -#define CONFIG_ENV_IS_IN_MMC -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTCOMMAND \ - "dhcp;bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200n8 " \ - "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro" - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP - -#define CONFIG_NET_RETRY_COUNT 10 - -/* U-Boot memory configuration */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ -#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ - - -/* NAND configuration ... socketed with two chipselects. It normally comes - * with a 2GByte SLC part with 2KB pages (and 128KB erase blocks); other - * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC. (MLC - * pretty much demands the 4-bit ECC support.) You can of course swap in - * other parts, including small page ones. - * - * This presents a single read-only partition for all bootloader stuff. - * UBL (1+ block), U-Boot (256KB+), U-Boot environment (one block), and - * some extra space to help cope with bad blocks in that data. Linux - * shouldn't care about its detailed layout, and will probably want to use - * UBI/UBFS for the rest (except maybe on smallpage chips). It's easy to - * override this default partitioning using MTDPARTS and cmdlinepart. - */ -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" - -#ifdef CONFIG_SYS_NAND_LARGEPAGE -/* Use same layout for 128K/256K blocks; allow some bad blocks */ -#define PART_BOOT "2m(bootloader)ro," -#else -/* Assume 16K erase blocks; allow a few bad ones. */ -#define PART_BOOT "512k(bootloader)ro," -#endif - -#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */ -#define PART_REST "-(filesystem)" - -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ |