summaryrefslogtreecommitdiff
path: root/include/configs/davinci_dvevm.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/davinci_dvevm.h')
-rw-r--r--include/configs/davinci_dvevm.h216
1 files changed, 0 insertions, 216 deletions
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
deleted file mode 100644
index 15d8150..0000000
--- a/include/configs/davinci_dvevm.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Define this to make U-Boot skip low level initialization when loaded
- * by initial bootloader. Not required by NAND U-Boot version but IS
- * required for a NOR version used to burn the real NOR U-Boot into
- * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
- * so it is NOT possible to build a U-Boot with both NAND and NOR routines.
- * NOR U-Boot is loaded directly from Flash so it must perform all the
- * low level initialization itself. NAND version is loaded by an initial
- * bootloader (UBL in TI-ese) that performs such an initialization so it's
- * skipped in NAND version. The third DaVinci boot mode loads a bootloader
- * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
- * performing low level init prior to loading. All that means we can NOT use
- * NAND version to put U-Boot into NOR because it doesn't have NOR support and
- * we can NOT use NOR version because it performs low level initialization
- * effectively destroying itself in DDR memory. That's why a separate NOR
- * version with this define is needed. It is loaded via UART, then one uses
- * it to somehow download a proper NOR version built WITHOUT this define to
- * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
- * NOR support into the initial bootloader so it won't be needed but DaVinci
- * static RAM might be too small for this (I have something like 2Kbytes left
- * as of now, without NOR support) so this might've not happened...
- *
-#define CONFIG_NOR_UART_BOOT
- */
-
-/*=======*/
-/* Board */
-/*=======*/
-#define DV_EVM
-#define CONFIG_SYS_NAND_SMALLPAGE
-#define CONFIG_SYS_USE_NAND
-/*===================*/
-/* SoC Configuration */
-/*===================*/
-#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
-#define CONFIG_SOC_DM644X
-/*====================================================*/
-/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
-/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
-/*====================================================*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-/*=============*/
-/* Memory Info */
-/*=============*/
-#define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
-#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */
-#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
-#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */
-
-#define DDR_8BANKS /* 8-bank DDR2 (256MB) */
-/*====================*/
-/* Serial Driver info */
-/*====================*/
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */
-#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */
-#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-/*===================*/
-/* I2C Configuration */
-/*===================*/
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
-/*==================================*/
-/* Network & Ethernet Configuration */
-/*==================================*/
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-/*=====================*/
-/* Flash & Environment */
-/*=====================*/
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS 2
-#undef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
-#ifdef CONFIG_SYS_NAND_SMALLPAGE
-#define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT \
- "nand0=davinci_nand.0"
-#define MTDPARTS_DEFAULT \
- "mtdparts=davinci_nand.0:384k(bootloader)ro,4m(kernel),-(filesystem)"
-#else
-#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
-#endif
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
-#define CONFIG_SYS_NAND_BASE 0x02000000
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
-#elif defined(CONFIG_SYS_USE_NOR)
-#ifdef CONFIG_NOR_UART_BOOT
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
-#else
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-#define CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_SYS_NO_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
-#define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
-#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3)
-#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
-#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)
-#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ /* Env sector Size */
-#endif
-/*==============================*/
-/* U-Boot general configuration */
-/*==============================*/
-#define CONFIG_MISC_INIT_R
-#undef CONFIG_BOOTDELAY
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-#define CONFIG_USB_MUSB_HCD
-#define CONFIG_USB_DAVINCI
-/*===================*/
-/* Linux Information */
-/*===================*/
-#define LINUX_BOOT_PARAM_ADDR 0x80000100
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2050000"
-/*=================*/
-/* U-Boot commands */
-/*=================*/
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_EEPROM
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_CMD_NAND
-#elif defined(CONFIG_SYS_USE_NOR)
-#define CONFIG_CMD_JFFS2
-#else
-#error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!"
-#endif
-/*==========================*/
-/* USB MSC support (if any) */
-/*==========================*/
-#ifdef CONFIG_USB_DAVINCI
-#define CONFIG_CMD_USB
-#ifdef CONFIG_USB_MUSB_HCD
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_STORAGE
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-#ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL
-#define CONFIG_PREBOOT "usb start"
-#endif
-#endif
-
-#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */