diff options
Diffstat (limited to 'include/configs/davinci_schmoogie.h')
| -rw-r--r-- | include/configs/davinci_schmoogie.h | 136 |
1 files changed, 0 insertions, 136 deletions
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h deleted file mode 100644 index bc5e1ca..0000000 --- a/include/configs/davinci_schmoogie.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*=======*/ -/* Board */ -/*=======*/ -#define SCHMOOGIE -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_USE_NAND -#define MACH_TYPE_SCHMOOGIE 1255 -#define CONFIG_MACH_TYPE MACH_TYPE_SCHMOOGIE - -/*===================*/ -/* SoC Configuration */ -/*===================*/ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/*=============*/ -/* Memory Info */ -/*=============*/ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ -#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ -/*====================*/ -/* Serial Driver info */ -/*====================*/ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/*===================*/ -/* I2C Configuration */ -/*===================*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ -/* Network & Ethernet Configuration */ -/*==================================*/ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_OVERWRITE_ETHADDR_ONCE -/*=====================*/ -/* Flash & Environment */ -/*=====================*/ -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -/*=====================*/ -/* Board related stuff */ -/*=====================*/ -#define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */ -#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */ -#define CONFIG_SYS_UID_ADDR 0x50 /* UID chip I2C address */ -/*==============================*/ -/* U-Boot general configuration */ -/*==============================*/ -#define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -/*===================*/ -/* Linux Information */ -/*===================*/ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot" -/*=================*/ -/* U-Boot commands */ -/*=================*/ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NAND -#undef CONFIG_CMD_EEPROM - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ |