summaryrefslogtreecommitdiff
path: root/include/configs/ml300.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/ml300.h')
-rw-r--r--include/configs/ml300.h66
1 files changed, 33 insertions, 33 deletions
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index 8d48221..68d0c85 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -59,15 +59,15 @@
#define CONFIG_SYSTEMACE 1
#define CONFIG_DOS_PARTITION 1
-#define CFG_SYSTEMACE_BASE XPAR_OPB_SYSACE_0_BASEADDR
-#define CFG_SYSTEMACE_WIDTH XPAR_XSYSACE_MEM_WIDTH
+#define CONFIG_SYS_SYSTEMACE_BASE XPAR_OPB_SYSACE_0_BASEADDR
+#define CONFIG_SYS_SYSTEMACE_WIDTH XPAR_XSYSACE_MEM_WIDTH
#define CONFIG_ENV_IS_IN_EEPROM 1 /* environment is in EEPROM */
/* following are used only if env is in EEPROM */
#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CFG_I2C_EEPROM_ADDR XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
-#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_ADDR XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_ENV_OFFSET XPAR_PERSISTENT_0_IIC_0_BASEADDR
#define CONFIG_MISC_INIT_R 1 /* used to call out convert_env() */
#define CONFIG_ENV_OVERWRITE 1 /* allow users to update ethaddr and serial# */
@@ -75,7 +75,7 @@
#include "../board/xilinx/ml300/xparameters.h"
-#define CFG_NO_FLASH 1 /* no flash */
+#define CONFIG_SYS_NO_FLASH 1 /* no flash */
#define CONFIG_ENV_SIZE XPAR_PERSISTENT_0_IIC_0_HIGHADDR - XPAR_PERSISTENT_0_IIC_0_BASEADDR + 1
#define CONFIG_BAUDRATE 9600
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
@@ -86,7 +86,7 @@
"root=/dev/xsysace/disc0/part3 rw"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
/*
@@ -117,58 +117,58 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-#define CFG_DUART_CHAN 0
-#define CFG_NS16550_REG_SIZE -4
-#define CFG_NS16550 1
-#define CFG_INIT_CHAN1 1
+#define CONFIG_SYS_DUART_CHAN 0
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550 1
+#define CONFIG_SYS_INIT_CHAN1 1
/* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE \
+#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-#define CFG_LOAD_ADDR 0x400000 /* default load address */
-#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
+#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_MONITOR_BASE 0x04000000
-#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_MONITOR_BASE 0x04000000
+#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
-#define CFG_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */
-#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */
+#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*
* Internal Definitions