diff options
Diffstat (limited to 'include/configs/o3dnt.h')
| -rw-r--r-- | include/configs/o3dnt.h | 69 |
1 files changed, 0 insertions, 69 deletions
diff --git a/include/configs/o3dnt.h b/include/configs/o3dnt.h deleted file mode 100644 index f0fceda..0000000 --- a/include/configs/o3dnt.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFC000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* Additional commands */ -#define CONFIG_CMD_REGINFO - -/* - * GPIO configuration: - * no CAN + no PCI - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x0000A000 - -/* Other board specific configs */ -#define CONFIG_SYS_BOOTCS_CFG 0x00057d01 -#define CONFIG_SYS_RESET_ADDRESS 0xfc000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */ - -#define CONFIG_BOARD_NAME "o3dnt" -#define CONFIG_BOARD_BOOTCMD "run flash_self" -#define CONFIG_BOARD_MEM_LIMIT __stringify(62) -#define BOARD_POST_CRC32_END __stringify(0x01000000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "linbot=fc060000\0" \ - "lintop=fc15ffff\0" \ - "rambot=fc160000\0" \ - "ramtop=fc55ffff\0" \ - "jffbot=fc560000\0" \ - "jfftop=fce5ffff\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=fc03ffff\0" \ - "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \ - "calbot=fce60000\0" \ - "caltop=fcffffff\0" \ - "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};" \ - "cp.b ${fileaddr} ${calbot} ${filesize}\0" \ - "kernel_addr=0xfc060000\0" \ - "ramdisk_addr=0xfc160000\0" \ - "master=mw f0000b00 0x0005A006;mw f0000b0c ${IOpin};" \ - "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" |