diff options
Diffstat (limited to 'include/configs/rpi.h')
-rw-r--r-- | include/configs/rpi.h | 168 |
1 files changed, 2 insertions, 166 deletions
diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 9b32149..ab2f4db 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2012 Stephen Warren + * (C) Copyright 2012,2015 Stephen Warren * * SPDX-License-Identifier: GPL-2.0 */ @@ -7,170 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <linux/sizes.h> - -/* Architecture, CPU, etc.*/ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_BCM2835 -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_DCACHE_OFF -/* - * 2835 is a SKU in a series for which the 2708 is the first or primary SoC, - * so 2708 has historically been used rather than a dedicated 2835 ID. - */ -#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 - -/* Memory layout */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_TEXT_BASE 0x00008000 -#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -/* - * The board really has 256M. However, the VC (VideoCore co-processor) shares - * the RAM, and uses a configurable portion at the top. We tell U-Boot that a - * smaller amount of RAM is present in order to avoid stomping on the area - * the VC uses. - */ -#define CONFIG_SYS_SDRAM_SIZE SZ_128M -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_SDRAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_MALLOC_LEN SZ_4M -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x00200000 -#define CONFIG_LOADADDR 0x00200000 - -/* Flash */ -#define CONFIG_SYS_NO_FLASH - -/* Devices */ -/* GPIO */ -#define CONFIG_BCM2835_GPIO -/* LCD */ -#define CONFIG_LCD -#define CONFIG_LCD_DT_SIMPLEFB -#define LCD_BPP LCD_COLOR16 -/* - * Prevent allocation of RAM for FB; the real FB address is queried - * dynamically from the VideoCore co-processor, and comes from RAM - * not owned by the ARM CPU. - */ -#define CONFIG_FB_ADDR 0 -#define CONFIG_VIDEO_BCM2835 -#define CONFIG_SYS_WHITE_ON_BLACK - -/* SD/MMC configuration */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_SDHCI -#define CONFIG_MMC_SDHCI_IO_ACCESSORS -#define CONFIG_BCM2835_SDHCI - -#define CONFIG_CMD_USB -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_DWC2 -#define CONFIG_USB_DWC2_REG_ADDR 0x20980000 -#define CONFIG_USB_STORAGE -#define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_ETHER_SMSC95XX -#define CONFIG_MISC_INIT_R -#endif - -/* Console UART */ -#define CONFIG_PL01X_SERIAL -#define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 115200 - -/* Console configuration */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -/* Environment */ -#define CONFIG_ENV_SIZE SZ_16K -#define CONFIG_ENV_IS_IN_FAT -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "0:1" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_FAT_WRITE -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_SYS_LOAD_ADDR 0x1000000 -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* Shell */ -#define CONFIG_SYS_MAXARGS 8 -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_COMMAND_HISTORY - -/* Commands */ -#include <config_cmd_default.h> -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_MMC -#define CONFIG_PARTITION_UUIDS -#define CONFIG_CMD_PART - -/* Device tree support */ -#define CONFIG_OF_BOARD_SETUP -/* ATAGs support for bootm/bootz */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG - -#include <config_distro_defaults.h> - -/* Some things don't make sense on this HW or yet */ -#undef CONFIG_CMD_FPGA - -/* Environment */ -#define ENV_DEVICE_SETTINGS \ - "stdin=serial,lcd\0" \ - "stdout=serial,lcd\0" \ - "stderr=serial,lcd\0" - -/* - * Memory layout for where various images get loaded by boot scripts: - * - * scriptaddr can be pretty much anywhere that doesn't conflict with something - * else. Put it low in memory to avoid conflicts. - * - * pxefile_addr_r can be pretty much anywhere that doesn't conflict with - * something else. Put it low in memory to avoid conflicts. - * - * kernel_addr_r must be within the first 128M of RAM in order for the - * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will - * decompress itself to 0x8000 after the start of RAM, kernel_addr_r - * should not overlap that area, or the kernel will have to copy itself - * somewhere else before decompression. Similarly, the address of any other - * data passed to the kernel shouldn't overlap the start of RAM. Pushing - * this up to 16M allows for a sizable kernel to be decompressed below the - * compressed load address. - * - * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for - * the compressed kernel to be up to 16M too. - * - * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows - * for the FDT/DTB to be up to 1M, which is hopefully plenty. - */ -#define ENV_MEM_LAYOUT_SETTINGS \ - "scriptaddr=0x00000000\0" \ - "pxefile_addr_r=0x00100000\0" \ - "kernel_addr_r=0x01000000\0" \ - "fdt_addr_r=0x02000000\0" \ - "ramdisk_addr_r=0x02100000\0" \ - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(USB, usb, 0) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) -#include <config_distro_bootcmd.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - ENV_DEVICE_SETTINGS \ - ENV_MEM_LAYOUT_SETTINGS \ - BOOTENV - -#define CONFIG_BOOTDELAY 2 +#include "rpi-common.h" #endif |