summaryrefslogtreecommitdiff
path: root/include/configs/sc520_spunk.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/sc520_spunk.h')
-rw-r--r--include/configs/sc520_spunk.h250
1 files changed, 0 insertions, 250 deletions
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
deleted file mode 100644
index cf5633c..0000000
--- a/include/configs/sc520_spunk.h
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SKIP_RELOCATE_UBOOT
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_X86 1 /* This is a X86 CPU */
-#define CONFIG_SYS_SC520 1 /* Include support for AMD SC520 */
-#define CONFIG_SYS_SC520_SSI
-
-#define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6 /* 6T */
-#define CONFIG_SYS_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
-#define CONFIG_SYS_SDRAM_RAS_CAS_DELAY 3 /* 3T */
-
-/* define at most one of these */
-#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
-#define CONFIG_SYS_SDRAM_CAS_LATENCY_3T
-
-#define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */
-#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */
-#undef CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */
-#define CONFIG_SYS_GENERIC_TIMER 1 /* use the i8254 PIT timers */
-#undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */
-#define CONFIG_SYS_PCAT_INTERRUPTS
-#define CONFIG_SYS_NUM_IRQS 16
-
-#define CONFIG_SYS_STACK_SIZE 0x8000 /* Size of bootloader stack */
-
-#define CONFIG_SHOW_BOOT_PROGRESS 1
-#define CONFIG_LAST_STAGE_INIT 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-
-#define CONFIG_BAUDRATE 9600
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PCMCIA
-#define CONFIG_CMD_EEPROM
-
-
-#define CONFIG_BOOTDELAY 15
-#define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 " \
- "mtdparts=phys:7936k(root),256k(uboot) "
-#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf " \
- "console=ttyS0,9600 " \
- "mtdparts=phys:7808k(root),128k(env),256k(uboot);" \
- "bootp;bootm"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1024 /* incrementer freq: 1kHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 4 /* we have 4 banks of DRAM */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-
-#define CONFIG_SPI_EEPROM /* SPI EEPROMs such as AT25010 or AT25640 */
-#define CONFIG_MW_EEPROM /* MicroWire EEPROMS such as AT93LC46 */
-#define CONFIG_DTT_DS1722 /* Dallas DS1722 SPI Temperature probe */
-
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-
-#if 0
-/* Environment in flash */
-#define CONFIG_ENV_IS_IN_FLASH 1
-# define CONFIG_ENV_ADDR (0x387a0000) /* Addr of Environment Sector */
-# define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector (or 0x10000) */
-# define CONFIG_ENV_OFFSET 0
-
-#else
-/* Environment in EEPROM */
-
-# define CONFIG_ENV_IS_IN_EEPROM 1
-# define CONFIG_SPI
-# define CONFIG_SPI_X 1
-# define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment EEPROM */
-# define CONFIG_ENV_OFFSET 0x1c00
-
-#endif
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=sc520_spunk-0"
-#define MTDPARTS_DEFAULT "mtdparts=sc520_spunk-0:-(jffs2)"
-*/
-
-/*-----------------------------------------------------------------------
- * Device drivers
- */
-#define CONFIG_NET_MULTI /* Multi ethernet cards support */
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-
-/************************************************************
- * IDE/ATA stuff
- ************************************************************/
-#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */
-#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
-#define CONFIG_SYS_ATA_BASE_ADDR 0
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01f0 /* ide0 offset */
-#define CONFIG_SYS_ATA_IDE1_OFFSET 0xe000 /* ide1 offset */
-#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */
-#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */
-
-#define CONFIG_SYS_FIRST_PCMCIA_BUS 1
-
-#undef CONFIG_IDE_LED /* no led for ide supported */
-#undef CONFIG_IDE_RESET /* reset for ide unsupported... */
-#undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */
-
-#define CONFIG_IDE_TI_CARDBUS
-#define CONFIG_SYS_PCMCIA_CIS_WIN 0x27f00000
-#define CONFIG_SYS_PCMCIA_CIS_WIN_SIZE 0x00100000
-#define CONFIG_SYS_PCMCIA_IO_WIN 0xe000
-#define CONFIG_SYS_PCMCIA_IO_WIN_SIZE 16
-#define CONFIG_PCMCIA_SLOT_A /* TODO: Check this */
-
-/************************************************************
- * DISK Partition support
- ************************************************************/
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION /* Experimental */
-
-
-/************************************************************
- * RTC
- ***********************************************************/
-#define CONFIG_RTC_MC146818
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * PCI stuff
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_PNP /* pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW
-
-#define CONFIG_SYS_FIRST_PCI_IRQ 9
-#define CONFIG_SYS_SECOND_PCI_IRQ 10
-#define CONFIG_SYS_THIRD_PCI_IRQ 11
-#define CONFIG_SYS_FORTH_PCI_IRQ 12
-
-#endif /* __CONFIG_H */