diff options
Diffstat (limited to 'include/configs')
52 files changed, 861 insertions, 97 deletions
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 69c0336..cdccbef 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2003-2005 + * (C) Copyright 2003-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * (C) Copyright 2004-2006 @@ -19,6 +19,8 @@ #define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO /* * Valid values for CONFIG_SYS_TEXT_BASE are: diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index cc22045..0d5a2b9 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_TQM823L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 4fd070f..e765a03 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_TQM823M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index ca3750d..bbdc3f8 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_TQM850L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 659c9ad..5fc87f2 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_TQM850M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 906d79b..589d168 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC855 1 /* This is a MPC855 CPU */ #define CONFIG_TQM855L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 44d456e..60acb56 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC855 1 /* This is a MPC855 CPU */ #define CONFIG_TQM855M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 855b0cd..ebc5571 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_TQM860L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 8109379..f4ce07f 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_TQM860M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index da4af93..97db519 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -20,6 +20,8 @@ #define CONFIG_MPC860 1 #define CONFIG_MPC860T 1 #define CONFIG_MPC862 1 +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_TQM862L 1 /* ...on a TQM8xxL module */ diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index ec3a57b..25d60a7 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -20,6 +20,8 @@ #define CONFIG_MPC860 1 #define CONFIG_MPC860T 1 #define CONFIG_MPC862 1 +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_TQM862M 1 /* ...on a TQM8xxM module */ diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index cb8b84d..928b879 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC866 1 /* This is a MPC866 CPU */ #define CONFIG_TQM866M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index d1e6c5b..598020c 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2005 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * (C) Copyright 2006 @@ -22,6 +22,8 @@ #define CONFIG_MPC885 1 /* This is a MPC885 CPU */ #define CONFIG_TQM885D 1 /* ...on a TQM88D module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/alt.h b/include/configs/alt.h index 7238f68..7bd649f 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -31,10 +31,17 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_NFS #define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE #define CONFIG_CMD_SF #define CONFIG_CMD_SPI +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x70000000 +#else #define CONFIG_SYS_TEXT_BASE 0xE6304000 +#endif #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_GENERIC_BOARD @@ -59,7 +66,11 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_TMU_TIMER +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC +#else #define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC +#endif #define STACK_AREA_SIZE 0xC000 #define LOW_LEVEL_MERAM_STACK \ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) @@ -162,4 +173,14 @@ #define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ +/* Filesystems */ +#define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_VFAT + +/* USB */ +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_RMOBILE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + #endif /* __ALT_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 1ec783d..560e3bf 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -314,6 +314,18 @@ #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST +#ifndef CONFIG_SPL_USBETH_SUPPORT +/* Fastboot */ +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 + +/* To support eMMC booting */ +#define CONFIG_STORAGE_EMMC +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 +#endif + #ifdef CONFIG_MUSB_HOST #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE @@ -325,8 +337,8 @@ #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" /* USB TI's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0403 -#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 +#define CONFIG_G_DNL_VENDOR_NUM 0x0451 +#define CONFIG_G_DNL_PRODUCT_NUM 0xD022 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #endif /* CONFIG_MUSB_GADGET */ diff --git a/include/configs/aristainetos.h b/include/configs/aristainetos.h index 20aea85..e6a08df 100644 --- a/include/configs/aristainetos.h +++ b/include/configs/aristainetos.h @@ -77,7 +77,7 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 3 -#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 20)<<8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index ea9acf6..07ec5f2 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -39,6 +39,7 @@ # define CONFIG_CMD_FAT # define CONFIG_CMD_MMC # define CONFIG_DOS_PARTITION +# define CONFIG_SYS_MMC_MAX_BLK_COUNT 127 # endif # ifdef CONFIG_MMC_SPI # define CONFIG_CMD_MMC_SPI diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h new file mode 100644 index 0000000..918032b --- /dev/null +++ b/include/configs/cm_t3517.h @@ -0,0 +1,320 @@ +/* + * (C) Copyright 2013 CompuLab, Ltd. + * Author: Igor Grinberg <grinberg@compulab.co.il> + * + * Configuration settings for the CompuLab CM-T3517 board + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_OMAP /* in a TI OMAP core */ +#define CONFIG_CM_T3517 /* working with CM-T3517 */ +#define CONFIG_OMAP_COMMON +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_SYS_TEXT_BASE 0x80008000 + +/* + * This is needed for the DMA stuff. + * Although the default iss 64, we still define it + * to be on the safe side once the default is changed. + */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + +#define CONFIG_EMIF4 /* The chip has EMIF4 controller */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#define CONFIG_MISC_INIT_R + +#define CONFIG_OF_LIBFDT +/* + * The early kernel mapping on ARM currently only maps from the base of DRAM + * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000. + * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000, + * so that leaves DRAM base to DRAM base + 0x4000 available. + */ +#define CONFIG_SYS_BOOTMAPSZ 0x4000 + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SERIAL_TAG + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} + +#define CONFIG_OMAP_GPIO + +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* USB */ +#define CONFIG_USB_MUSB_AM35X + +#ifndef CONFIG_USB_MUSB_AM35X +#define CONFIG_USB_OMAP3 +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_OMAP +#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146 +#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147 +#else /* !CONFIG_USB_MUSB_AM35X */ +#define CONFIG_MUSB_HOST +#define CONFIG_MUSB_PIO_ONLY +#endif /* CONFIG_USB_MUSB_AM35X */ + +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ + "1920k(u-boot),256k(u-boot-env),"\ + "4m(kernel),-(fs)" + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_GPIO + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 400000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_BUS 0 +#define CONFIG_I2C_MULTI_BUS + +/* + * Board NAND Info. + */ +#define CONFIG_SYS_NAND_QUIET_TEST +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand at */ + /* CS0 */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "baudrate=115200\0" \ + "console=ttyO2,115200n8\0" \ + "mpurate=auto\0" \ + "vram=12M\0" \ + "dvimode=1024x768MR-16@60\0" \ + "defaultdisplay=dvi\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ + "mmcrootfstype=ext4\0" \ + "nandroot=/dev/mtdblock4 rw\0" \ + "nandrootfstype=ubifs\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "nandargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 2a0000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_CMD_BOOTZ +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_TIMESTAMP +#define CONFIG_SYS_AUTOLOAD "no" +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT "CM-T3517 # " +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) + +/* + * AM3517 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* CM-T3517 DRAM is only on CS0 */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define CONFIG_SYS_CS0_SIZE (256 << 20) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_ENV_IS_IN_NAND +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + +#if defined(CONFIG_CMD_NET) +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_DRIVER_TI_EMAC_USE_RMII +#define CONFIG_MII +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE (0x2C000000 + (16 << 20)) +#endif /* CONFIG_CMD_NET */ + +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +/* Status LED */ +#define CONFIG_STATUS_LED /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED +#define CONFIG_GPIO_LED +#define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */ +#define GREEN_LED_DEV 0 +#define STATUS_LED_BIT GREEN_LED_GPIO +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BOOT GREEN_LED_DEV + +/* GPIO banks */ +#ifdef CONFIG_STATUS_LED +#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ +#endif + +/* Display Configuration */ +#define CONFIG_OMAP3_GPIO_2 +#define CONFIG_OMAP3_GPIO_5 +#define CONFIG_VIDEO_OMAP3 +#define LCD_BPP LCD_COLOR16 + +#define CONFIG_LCD +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASHIMAGE_GUARD +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP +#define CONFIG_SCF0403_LCD + +#define CONFIG_OMAP3_SPI + +#endif /* __CONFIG_H */ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 4b90dc2..fef267f 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -26,6 +26,7 @@ #define CONFIG_PHYSMEM #define CONFIG_SYS_EARLY_PCI_INIT #define CONFIG_DISPLAY_BOARDINFO_LATE +#define CONFIG_DISPLAY_CPUINFO #define CONFIG_DM #define CONFIG_CMD_DM @@ -48,6 +49,7 @@ #define CONFIG_FIT #undef CONFIG_ZLIB #undef CONFIG_GZIP +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /*----------------------------------------------------------------------- * Watchdog Configuration @@ -221,7 +223,7 @@ #define CONFIG_SYS_MEMTEST_START 0x00100000 #define CONFIG_SYS_MEMTEST_END 0x01000000 -#define CONFIG_SYS_LOAD_ADDR 0x02000000 +#define CONFIG_SYS_LOAD_ADDR 0x20000000 /*----------------------------------------------------------------------- * SDRAM Configuration diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index 89ba14e..41631c7 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -59,6 +59,7 @@ #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 308e520..5a5f940 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -27,7 +27,7 @@ #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x00908000 -#define CONFIG_SPL_MAX_SIZE (64 * 1024) +#define CONFIG_SPL_MAX_SIZE 0x10000 #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7" #define CONFIG_SPL_STACK 0x0091FFB8 #define CONFIG_SPL_LIBCOMMON_SUPPORT diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h index 7c8065a..d83e07e 100644 --- a/include/configs/k2e_evm.h +++ b/include/configs/k2e_evm.h @@ -17,14 +17,15 @@ /* U-Boot general configuration */ #define CONFIG_SYS_PROMPT "K2E EVM # " -#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ - "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" - -#define KS2_FDT_NAME "name_fdt=k2e-evm.dtb\0" -#define KS2_ADDR_MON "addr_mon=0x0c140000\0" -#define KS2_NAME_MON "name_mon=skern-k2e-evm.bin\0" -#define NAME_UBOOT "name_uboot=u-boot-spi-k2e-evm.gph\0" -#define NAME_UBI "name_ubi=k2e-evm-ubifs.ubi\0" +#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ + "addr_mon=0x0c140000\0" \ + "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \ + "name_fdt=uImage-k2e-evm.dtb\0" \ + "name_mon=skern-k2e-evm.bin\0" \ + "name_ubi=k2e-evm-ubifs.ubi\0" \ + "name_uboot=u-boot-spi-k2e-evm.gph\0" \ + "name_fs=arago-console-image-k2e-evm.cpio.gz\0" #include <configs/ks2_evm.h> @@ -35,14 +36,8 @@ #define CONFIG_SYS_NAND_PAGE_2K /* Network */ -#define CONFIG_DRIVER_TI_KEYSTONE_NET -#define CONFIG_TI_KSNAV -#define CONFIG_KSNAV_PKTDMA_NETCP #define CONFIG_KSNET_NETCP_V1_5 #define CONFIG_KSNET_CPSW_NUM_PORTS 9 #define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE -/* SerDes */ -#define CONFIG_TI_KEYSTONE_SERDES - #endif /* __CONFIG_K2E_EVM_H */ diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 034cbfd..ffddf13 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -17,14 +17,15 @@ /* U-Boot general configuration */ #define CONFIG_SYS_PROMPT "K2HK EVM # " -#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ - "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" - -#define KS2_FDT_NAME "name_fdt=k2hk-evm.dtb\0" -#define KS2_ADDR_MON "addr_mon=0x0c5f0000\0" -#define KS2_NAME_MON "name_mon=skern-k2hk-evm.bin\0" -#define NAME_UBOOT "name_uboot=u-boot-spi-k2hk-evm.gph\0" -#define NAME_UBI "name_ubi=k2hk-evm-ubifs.ubi\0" +#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ + "addr_mon=0x0c5f0000\0" \ + "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \ + "name_fdt=uImage-k2hk-evm.dtb\0" \ + "name_mon=skern-k2hk-evm.bin\0" \ + "name_ubi=k2hk-evm-ubifs.ubi\0" \ + "name_uboot=u-boot-spi-k2hk-evm.gph\0" \ + "name_fs=arago-console-image-k2hk-evm.cpio.gz\0" #include <configs/ks2_evm.h> @@ -35,13 +36,7 @@ #define CONFIG_SYS_NAND_PAGE_2K /* Network */ -#define CONFIG_DRIVER_TI_KEYSTONE_NET -#define CONFIG_TI_KSNAV -#define CONFIG_KSNAV_PKTDMA_NETCP #define CONFIG_KSNET_NETCP_V1_0 #define CONFIG_KSNET_CPSW_NUM_PORTS 5 -/* SerDes */ -#define CONFIG_TI_KEYSTONE_SERDES - #endif /* __CONFIG_K2HK_EVM_H */ diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h index 0e1f725..805164a 100644 --- a/include/configs/k2l_evm.h +++ b/include/configs/k2l_evm.h @@ -17,14 +17,15 @@ /* U-Boot general configuration */ #define CONFIG_SYS_PROMPT "K2L EVM # " -#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ - "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,4096\0" - -#define KS2_FDT_NAME "name_fdt=k2l-evm.dtb\0" -#define KS2_ADDR_MON "addr_mon=0x0c140000\0" -#define KS2_NAME_MON "name_mon=skern-k2l-evm.bin\0" -#define NAME_UBOOT "name_uboot=u-boot-spi-k2l-evm.gph\0" -#define NAME_UBI "name_ubi=k2l-evm-ubifs.ubi\0" +#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ + "addr_mon=0x0c140000\0" \ + "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,4096\0" \ + "name_fdt=uImage-k2l-evm.dtb\0" \ + "name_mon=skern-k2l-evm.bin\0" \ + "name_ubi=k2l-evm-ubifs.ubi\0" \ + "name_uboot=u-boot-spi-k2l-evm.gph\0" \ + "name_fs=arago-console-image-k2l-evm.cpio.gz\0" #include <configs/ks2_evm.h> @@ -34,4 +35,9 @@ /* NAND Configuration */ #define CONFIG_SYS_NAND_PAGE_4K +/* Network */ +#define CONFIG_KSNET_NETCP_V1_5 +#define CONFIG_KSNET_CPSW_NUM_PORTS 5 +#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE + #endif /* __CONFIG_K2L_EVM_H */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index e015e90..3ccadd0 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -38,7 +38,12 @@ #define CONFIG_FAT_WRITE #define CONFIG_EXT4_WRITE +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x70000000 +#else #define CONFIG_SYS_TEXT_BASE 0xE6304000 +#endif + #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_GENERIC_BOARD @@ -69,8 +74,13 @@ #define CONFIG_TMU_TIMER /* STACK */ -#define CONFIG_SYS_INIT_SP_ADDR 0xE633fffc -#define STACK_AREA_SIZE 0xC000 +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC +#else +#define CONFIG_SYS_INIT_SP_ADDR 0xE633fffC +#endif + +#define STACK_AREA_SIZE 0xC000 #define LOW_LEVEL_MERAM_STACK \ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index b0c91d8..dd5050f 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -105,6 +105,7 @@ #define CONFIG_SYS_SGMII_RATESCALE 2 /* Keyston Navigator Configuration */ +#define CONFIG_TI_KSNAV #define CONFIG_KSNAV_QM_BASE_ADDRESS KS2_QM_BASE_ADDRESS #define CONFIG_KSNAV_QM_CONF_BASE KS2_QM_CONF_BASE #define CONFIG_KSNAV_QM_DESC_SETUP_BASE KS2_QM_DESC_SETUP_BASE @@ -121,6 +122,7 @@ #define CONFIG_KSNAV_QM_QPOOL_NUM KS2_QM_QPOOL_NUM /* NETCP pktdma */ +#define CONFIG_KSNAV_PKTDMA_NETCP #define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE KS2_NETCP_PDMA_CTRL_BASE #define CONFIG_KSNAV_NETCP_PDMA_TX_BASE KS2_NETCP_PDMA_TX_BASE #define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM KS2_NETCP_PDMA_TX_CH_NUM @@ -134,12 +136,16 @@ #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE KS2_NETCP_PDMA_TX_SND_QUEUE /* Keystone net */ +#define CONFIG_DRIVER_TI_KEYSTONE_NET #define CONFIG_KSNET_MAC_ID_BASE KS2_MAC_ID_BASE_ADDR #define CONFIG_KSNET_NETCP_BASE KS2_NETCP_BASE #define CONFIG_KSNET_SERDES_SGMII_BASE KS2_SGMII_SERDES_BASE #define CONFIG_KSNET_SERDES_SGMII2_BASE KS2_SGMII_SERDES2_BASE #define CONFIG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES +/* SerDes */ +#define CONFIG_TI_KEYSTONE_SERDES + /* AEMIF */ #define CONFIG_TI_AEMIF #define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE @@ -218,6 +224,8 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_EEPROM #define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* U-Boot general configuration */ #define CONFIG_SYS_GENERIC_BOARD @@ -239,30 +247,25 @@ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_EXTRA_ENV_SETTINGS \ - "boot=ramfs\0" \ + CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ + "boot=ubi\0" \ "tftp_root=/\0" \ "nfs_root=/export\0" \ "mem_lpae=1\0" \ "mem_reserve=512M\0" \ "addr_fdt=0x87000000\0" \ "addr_kern=0x88000000\0" \ - KS2_ADDR_MON \ "addr_uboot=0x87000000\0" \ "addr_fs=0x82000000\0" \ "addr_ubi=0x82000000\0" \ "addr_secdb_key=0xc000000\0" \ "fdt_high=0xffffffff\0" \ - KS2_FDT_NAME \ - "name_fs=arago-console-image.cpio.gz\0" \ - "name_kern=uImage\0" \ - KS2_NAME_MON \ - NAME_UBOOT \ - NAME_UBI \ + "name_kern=uImage-keystone-evm.bin\0" \ "run_mon=mon_install ${addr_mon}\0" \ "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \ "init_net=run args_all args_net\0" \ "init_ubi=run args_all args_ubi; " \ - "ubi part ubifs; ubifsmount boot;" \ + "ubi part ubifs; ubifsmount ubi:boot;" \ "ubifsload ${addr_secdb_key} securedb.key.bin;\0" \ "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \ @@ -276,7 +279,6 @@ "burn_uboot_nand=nand erase 0 0x100000; " \ "nand write ${addr_uboot} 0 ${filesize}\0" \ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \ - KS2_ARGS_UBI \ "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ "${nfs_options} ip=dhcp\0" \ diff --git a/include/configs/lager.h b/include/configs/lager.h index 699135f..a814b4c 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -39,7 +39,11 @@ #define CONFIG_FAT_WRITE #define CONFIG_EXT4_WRITE +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_TEXT_BASE 0xB0000000 +#else #define CONFIG_SYS_TEXT_BASE 0xE8080000 +#endif #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_GENERIC_BOARD @@ -70,8 +74,12 @@ #define CONFIG_TMU_TIMER /* STACK */ -#define CONFIG_SYS_INIT_SP_ADDR 0xE827fffc -#define STACK_AREA_SIZE 0xC000 +#if defined(CONFIGF_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_INIT_SP_ADDR 0xB003FFFC +#else +#define CONFIG_SYS_INIT_SP_ADDR 0xE827FFFC +#endif +#define STACK_AREA_SIZE 0xC000 #define LOW_LEVEL_MERAM_STACK \ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index efe770b..5c20991 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -171,6 +171,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "consdev=ttyAMA0\0" \ "baudrate=115200\0" \ + "bootscript=boot.scr\0" \ "bootdev=/dev/mmcblk0p2\0" \ "rootdev=/dev/mmcblk0p3\0" \ "netdev=eth0\0" \ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 135a3f5..e0528ce 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -29,5 +29,6 @@ #endif #define CONFIG_MP +#define CONFIG_MXC_GPT_HCLK #endif diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index 0ab3127..235dd6d 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -32,6 +32,9 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_PCA953X +#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} } + #include "mx6sabre_common.h" #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index fddedf1..4fcaf51 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -190,7 +190,6 @@ #define CONFIG_ENV_OFFSET (6 * SZ_64K) #define CONFIG_ENV_SIZE SZ_8K #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ @@ -210,4 +209,9 @@ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif +#define CONFIG_SYS_FSL_USDHC_NUM 3 +#if defined(CONFIG_ENV_IS_IN_MMC) +#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/ +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/novena.h b/include/configs/novena.h new file mode 100644 index 0000000..879141a --- /dev/null +++ b/include/configs/novena.h @@ -0,0 +1,298 @@ +/* + * Configuration settings for the Novena U-boot. + * + * Copyright (C) 2014 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* System configurations */ +#define CONFIG_MX6 +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DOS_PARTITION +#define CONFIG_FAT_WRITE +#define CONFIG_FIT +#define CONFIG_KEYBOARD +#define CONFIG_MXC_GPIO +#define CONFIG_OF_LIBFDT +#define CONFIG_REGEX +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SYS_NO_FLASH + +#include "configs/mx6_common.h" +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> +#include <config_cmd_default.h> + +/* U-Boot Commands */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_I2C +#define CONFIG_CMD_FUSE +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SATA +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_TIME +#define CONFIG_CMD_USB +#define CONFIG_VIDEO + +/* U-Boot general configurations */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print buffer size */ +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* Boot argument buffer size */ +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ +#define CONFIG_AUTO_COMPLETE /* Command auto complete */ +#define CONFIG_CMDLINE_EDITING /* Command history etc */ +#define CONFIG_SYS_HUSH_PARSER + +/* U-Boot environment */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_SIZE (16 * 1024) +/* + * Environment is on MMC, starting at offset 512KiB from start of the card. + * Please place first partition at offset 1MiB from the start of the card + * as recommended by GNU/fdisk. See below for details: + * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_OFFSET (512 * 1024) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#else +#define CONFIG_ENV_IS_NOWHERE +#endif + +/* Booting Linux */ +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOTFILE "fitImage" +#define CONFIG_BOOTARGS "console=ttymxc1,115200 " +#define CONFIG_BOOTCOMMAND "run net_nfs" +#define CONFIG_LOADADDR 0x18000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_HOSTNAME novena + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE 0xF0000000 + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x20000000 + +#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) + +/* SPL */ +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#include "imx6_spl.h" /* common IMX6 SPL configuration */ + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Ethernet Configuration */ +#ifdef CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0x7 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 +#define CONFIG_ARP_TIMEOUT 200UL +#endif + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* I2C EEPROM */ +#ifdef CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_SPD_BUS_NUM 2 +#endif + +/* MMC Configs */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#endif + +/* OCOTP Configs */ +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + +/* PCI express */ +#ifdef CONFIG_CMD_PCI +#define CONFIG_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_PCIE_IMX +#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29) +#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12) +#endif + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 + +/* SATA Configs */ +#ifdef CONFIG_CMD_SATA +#define CONFIG_DWC_AHSATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_LIBATA +#endif + +/* UART */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART2_BASE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_INDEX 1 + +/* USB Configs */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +/* Gadget part */ +#define CONFIG_CI_UDC +#define CONFIG_USBD_HS +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_CDC +#define CONFIG_NETCONSOLE +#endif + +/* Video output */ +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO +#define CONFIG_VIDEO_IPUV3 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_IPUV3_CLK 260000000 +#define CONFIG_CMD_HDMIDETECT +#define CONFIG_CONSOLE_MUX +#define CONFIG_IMX_HDMI +#define CONFIG_IMX_VIDEO_SKIP +#endif + +/* Extra U-Boot environment. */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "consdev=ttymxc1\0" \ + "baudrate=115200\0" \ + "bootdev=/dev/mmcblk0p1\0" \ + "rootdev=/dev/mmcblk0p2\0" \ + "netdev=eth0\0" \ + "kernel_addr_r=0x18000000\0" \ + "addcons=" \ + "setenv bootargs ${bootargs} " \ + "console=${consdev},${baudrate}\0" \ + "addip=" \ + "setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:${netdev}:off\0" \ + "addmisc=" \ + "setenv bootargs ${bootargs} ${miscargs}\0" \ + "addargs=run addcons addmisc\0" \ + "mmcload=" \ + "mmc rescan ; " \ + "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \ + "netload=" \ + "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \ + "miscargs=nohlt panic=1\0" \ + "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \ + "nfsargs=" \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath},v3,tcp\0" \ + "mmc_mmc=" \ + "run mmcload mmcargs addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "mmc_nfs=" \ + "run mmcload nfsargs addip addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "net_mmc=" \ + "run netload mmcargs addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "net_nfs=" \ + "run netload nfsargs addip addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "update_sd_spl_filename=SPL\0" \ + "update_sd_uboot_filename=u-boot.img\0" \ + "update_sd_firmware=" /* Update the SD firmware partition */ \ + "if mmc rescan ; then " \ + "if dhcp ${update_sd_spl_filename} ; then " \ + "mmc write ${loadaddr} 2 0x200 ; " \ + "fi ; " \ + "if dhcp ${update_sd_uboot_filename} ; then " \ + "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\ + "fi ; " \ + "fi\0" \ + +#endif /* __CONFIG_H */ diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h index 183c449..18388d1 100644 --- a/include/configs/o2dnt-common.h +++ b/include/configs/o2dnt-common.h @@ -17,6 +17,8 @@ * High Level Configuration Options */ #define CONFIG_MPC5200 +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* running at 33.000000MHz */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 006c9a9..b2b3750 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -29,8 +29,6 @@ #define CONFIG_REVISION_TAG 1 -#define CONFIG_SUPPORT_RAW_INITRD - /* define to enable boot progress via leds */ #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index f924965..1c04a58 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -29,8 +29,6 @@ #endif #endif -#define CONFIG_SYS_LITTLE_ENDIAN - #define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h index 005a853..73a95e6 100644 --- a/include/configs/ph1_ld4.h +++ b/include/configs/ph1_ld4.h @@ -37,8 +37,6 @@ #define CONFIG_DDR_NUM_CH0 1 #define CONFIG_DDR_NUM_CH1 1 -#define CONFIG_DDR_FREQ 1600 - /* * Memory Size & Mapping */ diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h index 7dd6fd2..fc5132d 100644 --- a/include/configs/ph1_pro4.h +++ b/include/configs/ph1_pro4.h @@ -37,8 +37,6 @@ #define CONFIG_DDR_NUM_CH0 2 #define CONFIG_DDR_NUM_CH1 2 -#define CONFIG_DDR_FREQ 1600 - #define CONFIG_UNIPHIER_SMP /* diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h index 1062aac..e2f1102 100644 --- a/include/configs/ph1_sld8.h +++ b/include/configs/ph1_sld8.h @@ -37,8 +37,6 @@ #define CONFIG_DDR_NUM_CH0 1 #define CONFIG_DDR_NUM_CH1 1 -#define CONFIG_DDR_FREQ 1333 - /* #define CONFIG_DDR_STANDARD */ /* diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 3633a35..dfa2e07 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -281,6 +281,7 @@ #define CONFIG_SYS_MAX_I2C_BUS 7 #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_CMD_USB_MASS_STORAGE diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 4b30d14..e7bace4 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -181,6 +181,7 @@ #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED /* diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index a2469eb..655025c 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -14,6 +14,7 @@ #undef CONFIG_BOARD_COMMON #undef CONFIG_USB_GADGET #undef CONFIG_USB_GADGET_S3C_UDC_OTG +#undef CONFIG_USB_GADGET_S3C_UDC_OTG_PHY #undef CONFIG_CMD_USB_MASS_STORAGE #undef CONFIG_REVISION_TAG #undef CONFIG_CMD_THOR_DOWNLOAD diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index c213082..c436fda 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -37,7 +37,7 @@ */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x0 -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE @@ -218,6 +218,34 @@ unsigned int cm_get_l4_sp_clk_hz(void); #endif /* + * USB Gadget (DFU, UMS) + */ +#if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +/* USB Composite download gadget - g_dnl */ +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_MASS_STORAGE + +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024) +#define DFU_DEFAULT_POLL_TIMEOUT 300 + +/* USB IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 /* NetChip */ +#define CONFIG_G_DNL_PRODUCT_NUM 0xA4A5 /* Linux-USB File-backed Storage Gadget */ +#define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM +#define CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM +#ifndef CONFIG_G_DNL_MANUFACTURER +#define CONFIG_G_DNL_MANUFACTURER "Altera" +#endif +#endif + +/* * U-Boot environment */ #define CONFIG_SYS_CONSOLE_IS_IN_ENV diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index d0191a3..e0ec52d 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -11,7 +11,6 @@ /* * A10 specific configuration */ -#define CONFIG_SUN4I /* sun4i SoC generation */ #define CONFIG_CLK_FULL_SPEED 1008000000 #define CONFIG_SYS_PROMPT "sun4i# " diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index 7b683e9..09f7533 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -11,7 +11,6 @@ /* * High Level Configuration Options */ -#define CONFIG_SUN5I /* sun5i SoC generation */ #define CONFIG_CLK_FULL_SPEED 1008000000 #define CONFIG_SYS_PROMPT "sun5i# " diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index 93a1d96..b714474 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -14,7 +14,6 @@ /* * A31 specific configuration */ -#define CONFIG_SUN6I /* sun6i SoC generation */ #define CONFIG_SYS_PROMPT "sun6i# " diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 966cbd8..0193826 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -12,7 +12,6 @@ /* * A20 specific configuration */ -#define CONFIG_SUN7I /* sun7i SoC generation */ #define CONFIG_CLK_FULL_SPEED 912000000 #define CONFIG_SYS_PROMPT "sun7i# " diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index 1c1a7cd..6f1fc48 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -12,7 +12,6 @@ /* * A23 specific configuration */ -#define CONFIG_SUN8I /* sun8i SoC generation */ #define CONFIG_SYS_PROMPT "sun8i# " /* diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index cc450e0..ce038ed 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -27,6 +27,14 @@ #define CONFIG_SYS_TEXT_BASE 0x4a000000 +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM) +# define CONFIG_CMD_DM +# define CONFIG_DM_GPIO +# define CONFIG_DM_SERIAL +# define CONFIG_DW_SERIAL +# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#endif + /* * Display CPU information */ @@ -36,13 +44,15 @@ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL /* ns16550 reg in the low bits of cpu reg */ -#define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_CLK 24000000 -#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE -#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE -#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE -#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE -#define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE +#ifndef CONFIG_DM_SERIAL +# define CONFIG_SYS_NS16550_REG_SIZE -4 +# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE +# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE +# define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE +# define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE +# define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE +#endif /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 4b9b629..a8790c2 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -174,6 +174,7 @@ #define CONFIG_CMD_ASKENV #define CONFIG_CMD_ECHO #define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD /* * Common filesystems support. When we have removable storage we diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index d97a961..c94eee1 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -9,13 +9,26 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_MX6 + +/* SPL */ +/* #if defined(CONFIG_SPL_BUILD) */ + +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_EXT_SUPPORT + +/* common IMX6 SPL configuration */ +#include "imx6_spl.h" + +/* #endif */ + #include "mx6_common.h" #include <asm/arch/imx-regs.h> #include <asm/imx-common/gpio.h> #include <linux/sizes.h> -#define CONFIG_MX6 - #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) #define PHYS_SDRAM_SIZE (512u * SZ_1M) #elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) @@ -57,7 +70,7 @@ #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(3, 19) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 50000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h index b18ae6d..7c4dba0 100644 --- a/include/configs/uniphier-common.h +++ b/include/configs/uniphier-common.h @@ -43,7 +43,7 @@ are defined. Select only one of them." #define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE #define CONFIG_SMC911X_32_BIT -#define CONFIG_SYS_MALLOC_F_LEN 0x7000 +#define CONFIG_SYS_MALLOC_F_LEN 0x2000 /*----------------------------------------------------------------------- * MMU and Cache Setting @@ -166,6 +166,13 @@ are defined. Select only one of them." #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +/* USB */ +#define CONFIG_CMD_USB +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE +#define CONFIG_DOS_PARTITION + /* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) @@ -241,9 +248,9 @@ are defined. Select only one of them." #define CONFIG_SYS_TEXT_BASE 0x84000000 -#if defined(CONFIG_SPL_BUILD) #define CONFIG_BOARD_POSTCLK_INIT -#else + +#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT #endif diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 9fb501a..809017c 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -78,6 +78,15 @@ #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + /* Ethernet Configuration */ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP |