diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/bur_am335x_common.h | 67 | ||||
| -rw-r--r-- | include/configs/bur_cfg_common.h | 64 | ||||
| -rw-r--r-- | include/configs/cm_t43.h | 15 | ||||
| -rw-r--r-- | include/configs/kwb.h | 19 | ||||
| -rw-r--r-- | include/configs/ls1021aqds.h | 23 | ||||
| -rw-r--r-- | include/configs/ls1043aqds.h | 13 | ||||
| -rw-r--r-- | include/configs/ls1043ardb.h | 7 | ||||
| -rw-r--r-- | include/configs/ls2080a_common.h | 11 | ||||
| -rw-r--r-- | include/configs/ls2080aqds.h | 4 | ||||
| -rw-r--r-- | include/configs/ls2080ardb.h | 6 | ||||
| -rw-r--r-- | include/configs/omap3_logic.h | 2 | ||||
| -rw-r--r-- | include/configs/rpi-common.h | 1 | ||||
| -rw-r--r-- | include/configs/stm32f746-disco.h | 89 | ||||
| -rw-r--r-- | include/configs/tseries.h | 14 |
14 files changed, 232 insertions, 103 deletions
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index ffc6811..a94b1e2 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -3,7 +3,7 @@ * * common parts used by B&R AM335x based boards * - * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> - + * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> - * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com * * SPDX-License-Identifier: GPL-2.0+ @@ -12,25 +12,9 @@ #ifndef __BUR_AM335X_COMMON_H__ #define __BUR_AM335X_COMMON_H__ /* ------------------------------------------------------------------------- */ -#define BUR_COMMON_ENV \ -"usbscript=usb start && fatload usb 0 0x80000000 usbscript.img && source\0" \ -"brdefaultip=if test -r ${ipaddr}; then; else" \ -" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \ -" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \ -"netconsole=echo switching to network console ...; " \ -"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \ -"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \ -"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \ -"setenv stdout nc;setenv stdin nc;setenv stderr nc\0" - -#define CONFIG_PREBOOT "run brdefaultip" -#define CONFIG_CMD_TIME - - #define CONFIG_AM33XX #define CONFIG_OMAP #define CONFIG_OMAP_COMMON -#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_CACHELINE_SIZE 64 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ @@ -53,24 +37,11 @@ #define CONFIG_BAUDRATE 115200 /* Network defines */ -#define CONFIG_CMD_DHCP -#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 2 -#define CONFIG_CMD_PING #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */ -#define CONFIG_SPL_ETH_SUPPORT #define CONFIG_PHYLIB #define CONFIG_PHY_NATSEMI -#define CONFIG_SPL_NET_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT /* used for a fetching MAC-Address */ -#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" -/* Network console */ -#define CONFIG_NETCONSOLE 1 -#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */ + /* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x402F0400 and 0x4030B800 as a download area and @@ -109,42 +80,8 @@ #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 #define CONFIG_SYS_I2C_OMAP24XX -#define CONFIG_CMD_I2C /* GPIO */ #define CONFIG_OMAP_GPIO -/* - * ---------------------------------------------------------------------------- - * The following are general good-enough settings for U-Boot. We set a - * large malloc pool as we generally have a lot of DDR, and we opt for - * function over binary size in the main portion of U-Boot as this is - * generally easily constrained later if needed. We enable the config - * options that give us information in the environment about what board - * we are on so we do not need to rely on the command prompt. We set a - * console baudrate of 115200 and use the default baud rate table. - */ -#define CONFIG_SYS_MALLOC_LEN (5120 << 10) -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE - -/* As stated above, the following choices are optional. */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE - -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 64 - -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 512 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* * Our platforms make use of SPL to initalize the hardware (primarily diff --git a/include/configs/bur_cfg_common.h b/include/configs/bur_cfg_common.h new file mode 100644 index 0000000..f183775 --- /dev/null +++ b/include/configs/bur_cfg_common.h @@ -0,0 +1,64 @@ +/* + * bur_cfg_common.h + * + * common parts used over all B&R boards + * + * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> - + * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __BUR_CFG_COMMON_H__ +#define __BUR_CFG_COMMON_H__ +/* ------------------------------------------------------------------------- */ +#define BUR_COMMON_ENV \ +"usbscript=usb start && fatload usb 0 ${scradr} usbscript.img &&" \ +" source ${scradr}\0" \ +"brdefaultip=if test -r ${ipaddr}; then; else" \ +" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \ +" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \ +"netconsole=echo switching to network console ...; " \ +"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \ +"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \ +"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \ +"setenv stdout nc;setenv stdin nc;setenv stderr nc\0" + +#define CONFIG_PREBOOT "run cfgscr; run brdefaultip" + +#define CONFIG_BOARD_LATE_INIT + +/* Network defines */ +#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 2 + +/* Network console */ +#define CONFIG_NETCONSOLE 1 +#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE + +/* As stated above, the following choices are optional. */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_VERSION_VARIABLE + +/* We set the max number of command args high to avoid HUSH bugs. */ +#define CONFIG_SYS_MAXARGS 64 + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\ + sizeof(CONFIG_SYS_PROMPT) + 16) +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#endif /* __BUR_CFG_COMMON_H__ */ diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index d3cd38d..1c1951c 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -18,10 +18,12 @@ #include <asm/arch/omap.h> /* Serial support */ -#define CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_CLK 48000000 #define CONFIG_SYS_NS16550_COM1 0x44e09000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#endif /* NAND support */ #define CONFIG_NAND @@ -68,9 +70,7 @@ #define CONFIG_AM437X_USB2PHY2_HOST /* SPI Flash support */ -#define CONFIG_SPI_FLASH #define CONFIG_TI_SPI_MMAP -#define CONFIG_SPI_FLASH_BAR #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 @@ -98,9 +98,8 @@ #undef CONFIG_SPL_OS_BOOT #undef CONFIG_SPL_GPIO_SUPPORT #undef CONFIG_SPL_NAND_SUPPORT -#undef CONFIG_SPL_BOARD_INIT -#undef CONFIG_BOOTDELAY -#include <config_distro_defaults.h> +#undef CONFIG_SYS_MONITOR_LEN +#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR #define CONFIG_ZERO_BOOTDELAY_CHECK #undef CONFIG_CMD_IMLS @@ -165,8 +164,12 @@ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024) +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x480 #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT #endif /* __CONFIG_CM_T43_H */ diff --git a/include/configs/kwb.h b/include/configs/kwb.h index 45253b8..60e6496 100644 --- a/include/configs/kwb.h +++ b/include/configs/kwb.h @@ -12,6 +12,7 @@ #ifndef __CONFIG_KWB_H__ #define __CONFIG_KWB_H__ +#include <configs/bur_cfg_common.h> #include <configs/bur_am335x_common.h> /* ------------------------------------------------------------------------- */ #define CONFIG_AM335X_LCD @@ -27,6 +28,9 @@ #define CONFIG_BMP_24BMP #define CONFIG_BMP_32BPP +/* memory */ +#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024) + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) @@ -103,10 +107,9 @@ BUR_COMMON_ENV \ #define CONFIG_BOOTDELAY 0 /* undefine command which we not need here */ -#undef CONFIG_BOOTM_NETBSD -#undef CONFIG_BOOTM_PLAN9 -#undef CONFIG_BOOTM_RTEMS -#undef CONFIG_CMD_CRC32 +#undef CONFIG_BOOTM_NETBSD +#undef CONFIG_BOOTM_PLAN9 +#undef CONFIG_BOOTM_RTEMS /* Support both device trees and ATAGs. */ #define CONFIG_OF_LIBFDT @@ -122,17 +125,11 @@ BUR_COMMON_ENV \ #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT /* attention! not only for gadget, enables also highspeed in hostmode */ #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST -#ifdef CONFIG_USB_MUSB_HOST -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#endif /* CONFIG_USB_MUSB_HOST */ - #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 @@ -151,4 +148,4 @@ BUR_COMMON_ENV \ #define CONFIG_CMD_FS_GENERIC #endif /* CONFIG_MMC, ... */ -#endif /* ! __CONFIG_TSERIES_H__ */ +#endif /* __CONFIG_KWB_H__ */ diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index f6efc55..39d747f 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -42,7 +42,7 @@ unsigned long get_board_sys_clk(void); unsigned long get_board_ddr_clk(void); #endif -#ifdef CONFIG_QSPI_BOOT +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 100000000 #define CONFIG_QIXIS_I2C_ACCESS @@ -56,7 +56,13 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_SD_BOOT -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg +#ifdef CONFIG_SD_BOOT_QSPI +#define CONFIG_SYS_FSL_PBL_RCW \ + board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg +#else +#define CONFIG_SYS_FSL_PBL_RCW \ + board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg +#endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT @@ -87,6 +93,9 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_QSPI_BOOT #define CONFIG_SYS_TEXT_BASE 0x40010000 +#endif + +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_SYS_NO_FLASH #endif @@ -162,7 +171,7 @@ unsigned long get_board_ddr_clk(void); /* * IFC Definitions */ -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -375,7 +384,9 @@ unsigned long get_board_ddr_clk(void); #else #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL +#ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 +#endif #define CONFIG_SYS_NS16550_CLK get_serial_clock() #endif @@ -410,7 +421,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DOS_PARTITION /* SPI */ -#ifdef CONFIG_QSPI_BOOT +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) /* QSPI */ #define QSPI0_AMBA_BASE 0x40000000 #define FSL_QSPI_FLASH_SIZE (1 << 24) @@ -555,6 +566,10 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#undef CONFIG_CMD_IMLS +#endif + #define CONFIG_ARMV7_NONSEC #define CONFIG_ARMV7_VIRT #define CONFIG_PEN_ADDR_BIG_ENDIAN diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index 4ab8e13..158cf02 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -379,6 +379,19 @@ unsigned long get_board_ddr_clk(void); #endif #endif +/* USB */ +#define CONFIG_HAS_FSL_XHCI_USB +#ifdef CONFIG_HAS_FSL_XHCI_USB +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_FSL +#define CONFIG_USB_XHCI_DWC3 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_EXT2 +#endif + /* * Miscellaneous configurable options */ diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 506f50d..bc40b06 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -268,6 +268,13 @@ #define CONFIG_ETHPRIME "FM1@DTSEC3" #endif +/* QE */ +#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ + !defined(CONFIG_QSPI_BOOT) +#define CONFIG_U_QE +#endif +#define CONFIG_SYS_QE_FW_ADDR 0x60600000 + /* USB */ #define CONFIG_HAS_FSL_XHCI_USB #ifdef CONFIG_HAS_FSL_XHCI_USB diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index def0a6f..64b82e8 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -264,14 +264,17 @@ unsigned long long get_qixis_addr(void); "kernel_start=0x581200000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ - "console=ttyAMA0,38400n8\0" + "console=ttyAMA0,38400n8\0" \ + "mcinitcmd=fsl_mc start mc 0x580300000" \ + " 0x580800000 \0" #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ "earlycon=uart8250,mmio,0x21c0500" \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ - " hugepagesz=2m hugepages=16" -#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ - "$kernel_size && bootm $kernel_load" + " hugepagesz=2m hugepages=256" +#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \ + " cp.b $kernel_start $kernel_load" \ + " $kernel_size && bootm $kernel_load" #define CONFIG_BOOTDELAY 10 /* Monitor Command Prompt */ diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index a402c06..dab3820 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -346,7 +346,9 @@ unsigned long get_board_ddr_clk(void); "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581100000\0" \ "kernel_load=0xa0000000\0" \ - "kernel_size=0x2800000\0" + "kernel_size=0x2800000\0" \ + "mcinitcmd=fsl_mc start mc 0x580300000" \ + " 0x580800000 \0" #ifdef CONFIG_FSL_MC_ENET #define CONFIG_FSL_MEMAC diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 116dbcd..b2c0181 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -327,13 +327,15 @@ unsigned long get_board_sys_clk(void); "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581100000\0" \ "kernel_load=0xa0000000\0" \ - "kernel_size=0x2800000\0" + "kernel_size=0x2800000\0" \ + "mcinitcmd=fsl_mc start mc 0x580300000" \ + " 0x580800000 \0" #undef CONFIG_BOOTARGS #define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ "earlycon=uart8250,mmio,0x21c0600" \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ - " hugepagesz=2m hugepages=16" + " hugepagesz=2m hugepages=256" /* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index fba2a12..0fc9d1c 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -40,7 +40,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO - +#define CONFIG_BOARD_LATE_INIT #define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h index 97e5d2c..e07fa65 100644 --- a/include/configs/rpi-common.h +++ b/include/configs/rpi-common.h @@ -68,6 +68,7 @@ #define CONFIG_FB_ADDR 0 #define CONFIG_VIDEO_BCM2835 #define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CONSOLE_SCROLL_LINES 10 /* SD/MMC configuration */ #define CONFIG_GENERIC_MMC diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h new file mode 100644 index 0000000..e1b8bcb --- /dev/null +++ b/include/configs/stm32f746-disco.h @@ -0,0 +1,89 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, <vikas.manocha@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_SYS_THUMB_BUILD +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_OF_LIBFDT +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_SYS_FLASH_BASE 0x08000000 +#define CONFIG_SYS_INIT_SP_ADDR 0x20050000 +#define CONFIG_SYS_TEXT_BASE 0x08000000 + +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF + +/* + * Configuration of the external SDRAM memory + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_RAM_SIZE ((64 + 192) << 10) +#define CONFIG_SYS_RAM_CS 1 +#define CONFIG_SYS_RAM_FREQ_DIV 2 +#define CONFIG_SYS_RAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE +#define CONFIG_SYS_LOAD_ADDR 0x20000000 +#define CONFIG_LOADADDR 0x20000000 + +#define CONFIG_SYS_MAX_FLASH_SECT 12 +#define CONFIG_SYS_MAX_FLASH_BANKS 2 + +#ifndef CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_FLASH +#else +#define CONFIG_ENV_IS_NOWHERE +#endif +#define CONFIG_ENV_SIZE (8 << 10) + +#define CONFIG_STM32_GPIO +#define CONFIG_STM32X7_SERIAL + +#define CONFIG_SYS_CLK_FREQ 16*1000*1000 /* 180 MHz */ +#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) + +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_MALLOC_LEN (16 * 1024) +#define CONFIG_STACKSIZE (64 << 10) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" +#define CONFIG_BOOTCOMMAND \ + "run bootcmd_romfs" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \ + "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \ + "bootm 0x08044000 - 0x08042000\0" + +#define CONFIG_BOOTDELAY 3 + +/* + * Command line configuration. + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_CMD_MEM +#define CONFIG_CMD_TIMER +#undef CONFIG_CMD_IMLS +#endif /* __CONFIG_H */ diff --git a/include/configs/tseries.h b/include/configs/tseries.h index 93e3454..43cf965 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -12,6 +12,7 @@ #ifndef __CONFIG_TSERIES_H__ #define __CONFIG_TSERIES_H__ +#include <configs/bur_cfg_common.h> #include <configs/bur_am335x_common.h> /* ------------------------------------------------------------------------- */ #define CONFIG_AM335X_LCD @@ -30,6 +31,10 @@ #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_AM33XX + +/* memory */ +#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024) + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) @@ -204,7 +209,6 @@ MMCARGS #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x8000000 #define CONFIG_NAND_OMAP_GPMC -#define CONFIG_CMD_NAND /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */ #define CONFIG_NAND_OMAP_ELM #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW @@ -249,23 +253,15 @@ MMCARGS #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT /* attention! not only for gadget, enables also highspeed in hostmode */ #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST -#ifdef CONFIG_USB_MUSB_HOST -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#endif /* CONFIG_USB_MUSB_HOST */ - #if defined(CONFIG_SPI_BOOT) /* McSPI IP block */ #define CONFIG_SPI #define CONFIG_OMAP3_SPI -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 24000000 #define CONFIG_SPL_SPI_SUPPORT |