summaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/mtd/docg4.h134
1 files changed, 134 insertions, 0 deletions
diff --git a/include/linux/mtd/docg4.h b/include/linux/mtd/docg4.h
new file mode 100644
index 0000000..982f5ad
--- /dev/null
+++ b/include/linux/mtd/docg4.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ *
+ */
+
+#ifndef __DOCG4_H__
+#define __DOCG4_H__
+
+#include <common.h>
+#include <linux/mtd/nand.h>
+
+extern int docg4_nand_init(struct mtd_info *mtd,
+ struct nand_chip *nand, int devnum);
+
+/* SPL-related definitions */
+#define DOCG4_IPL_LOAD_BLOCK_COUNT 2 /* number of blocks that IPL loads */
+#define DOCG4_BLOCK_CAPACITY_SPL 0x10000 /* reliable mode; redundant pages */
+
+#define DOC_IOSPACE_DATA 0x0800
+
+/* register offsets */
+#define DOC_CHIPID 0x1000
+#define DOC_DEVICESELECT 0x100a
+#define DOC_ASICMODE 0x100c
+#define DOC_DATAEND 0x101e
+#define DOC_NOP 0x103e
+
+#define DOC_FLASHSEQUENCE 0x1032
+#define DOC_FLASHCOMMAND 0x1034
+#define DOC_FLASHADDRESS 0x1036
+#define DOC_FLASHCONTROL 0x1038
+#define DOC_ECCCONF0 0x1040
+#define DOC_ECCCONF1 0x1042
+#define DOC_HAMMINGPARITY 0x1046
+#define DOC_BCH_SYNDROM(idx) (0x1048 + idx)
+
+#define DOC_ASICMODECONFIRM 0x1072
+#define DOC_CHIPID_INV 0x1074
+#define DOC_POWERMODE 0x107c
+
+#define DOCG4_MYSTERY_REG 0x1050
+
+/* apparently used only to write oob bytes 6 and 7 */
+#define DOCG4_OOB_6_7 0x1052
+
+/* DOC_FLASHSEQUENCE register commands */
+#define DOC_SEQ_RESET 0x00
+#define DOCG4_SEQ_PAGE_READ 0x03
+#define DOCG4_SEQ_FLUSH 0x29
+#define DOCG4_SEQ_PAGEWRITE 0x16
+#define DOCG4_SEQ_PAGEPROG 0x1e
+#define DOCG4_SEQ_BLOCKERASE 0x24
+
+/* DOC_FLASHCOMMAND register commands */
+#define DOCG4_CMD_PAGE_READ 0x00
+#define DOC_CMD_ERASECYCLE2 0xd0
+#define DOCG4_CMD_FLUSH 0x70
+#define DOCG4_CMD_READ2 0x30
+#define DOC_CMD_PROG_BLOCK_ADDR 0x60
+#define DOCG4_CMD_PAGEWRITE 0x80
+#define DOC_CMD_PROG_CYCLE2 0x10
+#define DOC_CMD_RESET 0xff
+
+/* DOC_POWERMODE register bits */
+#define DOC_POWERDOWN_READY 0x80
+
+/* DOC_FLASHCONTROL register bits */
+#define DOC_CTRL_CE 0x10
+#define DOC_CTRL_UNKNOWN 0x40
+#define DOC_CTRL_FLASHREADY 0x01
+
+/* DOC_ECCCONF0 register bits */
+#define DOC_ECCCONF0_READ_MODE 0x8000
+#define DOC_ECCCONF0_UNKNOWN 0x2000
+#define DOC_ECCCONF0_ECC_ENABLE 0x1000
+#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff
+
+/* DOC_ECCCONF1 register bits */
+#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
+#define DOC_ECCCONF1_ECC_ENABLE 0x07
+#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20
+
+/* DOC_ASICMODE register bits */
+#define DOC_ASICMODE_RESET 0x00
+#define DOC_ASICMODE_NORMAL 0x01
+#define DOC_ASICMODE_POWERDOWN 0x02
+#define DOC_ASICMODE_MDWREN 0x04
+#define DOC_ASICMODE_BDETCT_RESET 0x08
+#define DOC_ASICMODE_RSTIN_RESET 0x10
+#define DOC_ASICMODE_RAM_WE 0x20
+
+/* good status values read after read/write/erase operations */
+#define DOCG4_PROGSTATUS_GOOD 0x51
+#define DOCG4_PROGSTATUS_GOOD_2 0xe0
+
+/*
+ * On read operations (page and oob-only), the first byte read from I/O reg is a
+ * status. On error, it reads 0x73; otherwise, it reads either 0x71 (first read
+ * after reset only) or 0x51, so bit 1 is presumed to be an error indicator.
+ */
+#define DOCG4_READ_ERROR 0x02 /* bit 1 indicates read error */
+
+/* anatomy of the device */
+#define DOCG4_CHIP_SIZE 0x8000000
+#define DOCG4_PAGE_SIZE 0x200
+#define DOCG4_PAGES_PER_BLOCK 0x200
+#define DOCG4_BLOCK_SIZE (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE)
+#define DOCG4_NUMBLOCKS (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE)
+#define DOCG4_OOB_SIZE 0x10
+#define DOCG4_CHIP_SHIFT 27 /* log_2(DOCG4_CHIP_SIZE) */
+#define DOCG4_PAGE_SHIFT 9 /* log_2(DOCG4_PAGE_SIZE) */
+#define DOCG4_ERASE_SHIFT 18 /* log_2(DOCG4_BLOCK_SIZE) */
+
+/* all but the last byte is included in ecc calculation */
+#define DOCG4_BCH_SIZE (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1)
+
+#define DOCG4_USERDATA_LEN 520 /* 512 byte page plus 8 oob avail to user */
+
+/* expected values from the ID registers */
+#define DOCG4_IDREG1_VALUE 0x0400
+#define DOCG4_IDREG2_VALUE 0xfbff
+
+/* primitive polynomial used to build the Galois field used by hw ecc gen */
+#define DOCG4_PRIMITIVE_POLY 0x4443
+
+#define DOCG4_M 14 /* Galois field is of order 2^14 */
+#define DOCG4_T 4 /* BCH alg corrects up to 4 bit errors */
+
+#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */
+
+#endif /* __DOCG4_H__ */