diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-arm/arch-pxa/pxa-regs.h | 21 | ||||
| -rw-r--r-- | include/common.h | 2 | ||||
| -rw-r--r-- | include/configs/AdderUSB.h | 51 | ||||
| -rw-r--r-- | include/configs/IceCube.h | 11 | ||||
| -rw-r--r-- | include/configs/MPC8323ERDB.h | 583 | ||||
| -rw-r--r-- | include/configs/MPC8349ITX.h | 7 | ||||
| -rw-r--r-- | include/configs/MPC8641HPCN.h | 11 | ||||
| -rw-r--r-- | include/configs/TQM5200.h | 12 | ||||
| -rw-r--r-- | include/configs/TQM834x.h | 3 | ||||
| -rw-r--r-- | include/configs/delta.h | 12 | ||||
| -rw-r--r-- | include/configs/mp2usb.h | 11 | ||||
| -rw-r--r-- | include/configs/trab.h | 9 | ||||
| -rw-r--r-- | include/configs/yosemite.h | 9 | ||||
| -rw-r--r-- | include/da9030.h | 12 | ||||
| -rw-r--r-- | include/mpc83xx.h | 4 | ||||
| -rw-r--r-- | include/usb.h | 21 | ||||
| -rw-r--r-- | include/usb_cdc_acm.h | 43 | ||||
| -rw-r--r-- | include/usbdcore.h | 3 | ||||
| -rw-r--r-- | include/usbdcore_mpc8xx.h | 210 | ||||
| -rw-r--r-- | include/usbdcore_omap1510.h | 18 | ||||
| -rw-r--r-- | include/usbdescriptors.h | 38 |
21 files changed, 1050 insertions, 41 deletions
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index ebda719..e8cb299 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -592,9 +592,11 @@ typedef void (*ExcpHndlr) (void) ; #define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ #define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ + /* * USB Device Controller */ +#ifndef CONFIG_CPU_MONAHANS #define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ #define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ #define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ @@ -749,11 +751,28 @@ typedef void (*ExcpHndlr) (void) ; #define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */ #define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */ #define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */ +#endif /* ! CONFIG_CPU_MONAHANS */ + +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + +/* + * USB Client Controller (incomplete) + */ +#define UDCCR __REG(0x40600000) +#define UDCICR0 __REG(0x40600004) +#define UDCCIR0 __REG(0x40600008) +#define UDCISR0 __REG(0x4060000c) +#define UDCSIR1 __REG(0x40600010) +#define UDCFNR __REG(0x40600014) +#define UDCOTGICR __REG(0x40600018) +#define UDCOTGISR __REG(0x4060001c) +#define UP2OCR __REG(0x40600020) +#define UP3OCR __REG(0x40600024) -#if defined(CONFIG_PXA27X) /* * USB Host Controller */ +#define OHCI_REGS_BASE 0x4C000000 /* required for ohci driver */ #define UHCREV __REG(0x4C000000) #define UHCHCON __REG(0x4C000004) #define UHCCOMS __REG(0x4C000008) diff --git a/include/common.h b/include/common.h index ac29d3a..a822d28 100644 --- a/include/common.h +++ b/include/common.h @@ -526,6 +526,8 @@ void cpu_init_f (void); int cpu_init_r (void); #if defined(CONFIG_8260) int prt_8260_rsr (void); +#elif defined(CONFIG_MPC83XX) +int prt_83xx_rsr (void); #endif /* $(CPU)/interrupts.c */ diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h new file mode 100644 index 0000000..a4f7f9a --- /dev/null +++ b/include/configs/AdderUSB.h @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2006 CodeHermit. + * Bryan O'Donoghue <bodonoghue@codehermit.ie> + * + * Provides support for USB console on the Analogue & Micro Adder87x + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ADDERUSB__ +#define __ADDERUSB__ + +/* Include the board port */ +#include "Adder.h" + +#define CONFIG_USB_DEVICE /* Include UDC driver */ +#define CONFIG_USB_TTY /* Bind the TTY driver to UDC */ +#define CFG_USB_EXTC_CLK 0x02 /* Oscillator on EXTC_CLK 2 */ +#define CFG_USB_BRG_CLK 0x04 /* or use Baud rate generator 0x04 */ +#define CFG_CONSOLE_IS_IN_ENV /* Console is in env */ + +/* If you have a USB-IF assigned VendorID then you may wish to define + * your own vendor specific values either in BoardName.h or directly in + * usbd_vendor_info.h + */ + +/* +#define CONFIG_USBD_MANUFACTURER "CodeHermit.ie" +#define CONFIG_USBD_PRODUCT_NAME "Das U-Boot" +#define CONFIG_USBD_VENDORID 0xFFFF +#define CONFIG_USBD_PRODUCTID_GSERIAL 0xFFFF +#define CONFIG_USBD_PRODUCTID_CDCACM 0xFFFE +*/ + +#endif /* __ADDERUSB_H__ */ diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index cc902c8..1a7167b 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -84,10 +84,15 @@ #define CONFIG_ISO_PARTITION /* USB */ -#if 1 -#define CONFIG_USB_OHCI +#define CONFIG_USB_OHCI_NEW +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#endif +#define CFG_OHCI_BE_CONTROLLER +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CFG_USB_OHCI_SLOT_NAME "mpc5200" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h new file mode 100644 index 0000000..376973b --- /dev/null +++ b/include/configs/MPC8323ERDB.h @@ -0,0 +1,583 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_QE 1 /* Has QE */ +#define CONFIG_MPC83XX 1 /* MPC83xx family */ +#define CONFIG_MPC832X 1 /* MPC832x CPU specific */ + +#define CONFIG_PCI 1 +#define CONFIG_83XX_GENERIC_PCI 1 + +/* + * System Clock Setup + */ +#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN +#endif + +/* + * Hardware Reset Configuration Word + */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_VCO_1X2 |\ + HRCWL_CSB_TO_CLKIN_2X1 |\ + HRCWL_CORE_TO_CSB_2_5X1 |\ + HRCWL_CE_PLL_VCO_DIV_2 |\ + HRCWL_CE_PLL_DIV_1X1 |\ + HRCWL_CE_TO_PLL_1X3) + +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LALE_NORMAL) + +/* + * System IO Config + */ +#define CFG_SICRL 0x00000000 + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +/* + * IMMR new address + */ +#define CFG_IMMR 0xE0000000 + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDRCDR 0x73000002 /* DDR II voltage is 1.8V */ + +#undef CONFIG_SPD_EEPROM +#if defined(CONFIG_SPD_EEPROM) +/* Determine DDR configuration from I2C interface + */ +#define SPD_EEPROM_ADDRESS 0x51 /* DDR SODIMM */ +#else +/* Manually set up DDR parameters + */ +#define CFG_DDR_SIZE 64 /* MB */ +#define CFG_DDR_CS0_CONFIG 0x80840101 +#define CFG_DDR_TIMING_0 0x00220802 +#define CFG_DDR_TIMING_1 0x3935d322 +#define CFG_DDR_TIMING_2 0x0f9048ca +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_CLK_CNTL 0x02000000 +#define CFG_DDR_MODE 0x44400232 +#define CFG_DDR_MODE2 0x8000c000 +#define CFG_DDR_INTERVAL 0x03200064 +#define CFG_DDR_CS0_BNDS 0x00000003 +#define CFG_DDR_SDRAM_CFG 0x43080000 +#define CFG_DDR_SDRAM_CFG2 0x00401000 +#endif + +/* + * Memory test + */ +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00030000 /* memtest region */ +#define CFG_MEMTEST_END 0x03f00000 + +/* + * The reserved memory + */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) +#define CFG_LBC_LBCR 0x00000000 + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */ + +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM + +/* + * SDRAM on the Local Bus + */ +#undef CFG_LB_SDRAM /* The board has not SRDAM on local bus */ + +#ifdef CFG_LB_SDRAM +#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ + +/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 + * + * CFG_LBC_SDRAM_BASE should be masked and OR'ed into + * the top 17 bits of BR2. + */ + +#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */ + +/* + * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. + * + * For OR2, need: + * 64MB mask for AM, OR2[0:7] = 1111 1100 + * XAM, OR2[17:18] = 11 + * 9 columns OR2[19-21] = 010 + * 13 rows OR2[23-25] = 100 + * EAD set for extra time OR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 + */ + +#define CFG_OR2_PRELIM 0xfc006901 + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON 0x0063b723 + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) + +#endif + +/* + * Windows to access PIB via local bus + */ +#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */ +#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,8323@0" +#define OF_SOC "soc8323@e0000000" +#define OF_QE "qe@e0100000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500" + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 + +/* + * Config on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0xd0000000 +#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE +#define CFG_PCI1_IO_SIZE 0x04000000 /* 64M */ + +#ifdef CONFIG_PCI + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + +#endif /* CONFIG_PCI */ + + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#define CONFIG_ETHPRIME "Freescale GETH" + +#define CONFIG_UEC_ETH1 /* ETH3 */ + +#ifdef CONFIG_UEC_ETH1 +#define CFG_UEC1_UCC_NUM 2 /* UCC3 */ +#define CFG_UEC1_RX_CLK QE_CLK9 +#define CFG_UEC1_TX_CLK QE_CLK10 +#define CFG_UEC1_ETH_TYPE FAST_ETH +#define CFG_UEC1_PHY_ADDR 4 +#define CFG_UEC1_INTERFACE_MODE ENET_100_MII +#endif + +#define CONFIG_UEC_ETH2 /* ETH4 */ + +#ifdef CONFIG_UEC_ETH2 +#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ +#define CFG_UEC2_RX_CLK QE_CLK16 +#define CFG_UEC2_TX_CLK QE_CLK3 +#define CFG_UEC2_ETH_TYPE FAST_ETH +#define CFG_UEC2_PHY_ADDR 0 +#define CFG_UEC2_INTERFACE_MODE ENET_100_MII +#endif + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_ASKENV + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS +#endif + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Cache Config + */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ +#endif + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +/* IMMRBAR & PCI IO: cache-inhibit and guarded */ +#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CFG_IBAT2L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT2U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_DBAT2L (CFG_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U CFG_IBAT2U + +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CFG_IBAT4L (CFG_INIT_RAM_ADDR | BATL_PP_10) +#define CFG_IBAT4U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U + +#ifdef CONFIG_PCI +/* PCI MEM space: cacheable */ +#define CFG_IBAT5L (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT5U (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +/* PCI MMIO space: cache-inhibit and guarded */ +#define CFG_IBAT6L (CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT6U (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#else +#define CFG_IBAT5L (0) +#define CFG_IBAT5U (0) +#define CFG_IBAT6L (0) +#define CFG_IBAT6U (0) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#endif + +/* Nothing in BAT7 */ +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ETHADDR 00:04:9f:ef:03:01 +#define CONFIG_HAS_ETH1 /* add support for "eth1addr" */ +#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02 + +#define CONFIG_IPADDR 10.0.0.2 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_NETDEV eth1 + +#define CONFIG_HOSTNAME mpc8323erdb +#define CONFIG_ROOTPATH /nfsroot +#define CONFIG_RAMDISKFILE rootfs.ext2.gz.uboot +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ +#define CONFIG_FDTFILE mpc832x_rdb.dtb + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#define CONFIG_BAUDRATE 115200 + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftp $loadaddr $uboot;" \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "fdtaddr=400000\0" \ + "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0" \ + "console=ttyS0\0" \ + "setbootargs=setenv bootargs " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ + "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv rootdev /dev/nfs;" \ + "run setbootargs;" \ + "run setipargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv rootdev /dev/ram;" \ + "run setbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#undef MK_STR +#undef XMK_STR + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 121ff06..44649d0 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -289,6 +289,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} +#define CONFIG_CONSOLE ttyS0 #define CONFIG_BAUDRATE 115200 #define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) @@ -408,6 +409,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_ENV_SIZE 0x2000 #else #define CFG_NO_FLASH /* Flash is not usable now */ + #undef CFG_FLASH_CFI_DRIVER #define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) #define CFG_ENV_SIZE 0x2000 @@ -450,9 +452,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_CMD_I2C #endif - /* Watchdog */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -673,9 +673,10 @@ boards, we say we have two, but don't display a message if we find only one. */ " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \ MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \ MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \ - " console=ttyS0," MK_STR(CONFIG_BAUDRATE) + " console=" MK_STR(CONFIG_CONSOLE) "," MK_STR(CONFIG_BAUDRATE) #define CONFIG_EXTRA_ENV_SETTINGS \ + "console=" MK_STR(CONFIG_CONSOLE) "\0" \ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 888af53..64dcbd0 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -338,6 +338,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #undef CONFIG_EEPRO100 #undef CONFIG_TULIP +/************************************************************ + * USB support + ************************************************************/ +#define CONFIG_PCI_OHCI 1 +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_USB_KEYBOARD 1 +#define CFG_DEVICE_DEREGISTER +#define CFG_USB_EVENT_POLL 1 +#define CFG_USB_OHCI_SLOT_NAME "ohci_pci" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + #if !defined(CONFIG_PCI_PNP) #define PCI_ENET0_IOADDR 0xe0000000 #define PCI_ENET0_MEMADDR 0xe0000000 diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 63d77e2..8360d8c 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -130,8 +130,18 @@ /* USB */ #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) -#define CONFIG_USB_OHCI +#define CONFIG_USB_OHCI_NEW +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE + +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT +#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CFG_USB_OHCI_SLOT_NAME "mpc5200" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + +#else +#define ADD_USB_CMD 0 #endif #ifndef CONFIG_CAM5200 diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index c3efb7b..661712b 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -28,9 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define DEBUG -#undef DEBUG - /* * High Level Configuration Options */ diff --git a/include/configs/delta.h b/include/configs/delta.h index dbfe7a7..09667ed 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -118,6 +118,18 @@ #endif +/* USB */ +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_DOS_PARTITION 1 + +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE +#define CFG_USB_OHCI_SLOT_NAME "delta" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 3 + +#define LITTLEENDIAN 1 /* used by usb_ohci.c */ #define CONFIG_BOOTDELAY -1 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 8d6f261..ea5a44b 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -101,12 +101,18 @@ #undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ -#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_OHCI_NEW 1 #define CONFIG_USB_KEYBOARD 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_DOS_PARTITION 1 #define CONFIG_AT91C_PQFP_UHPBUG 1 +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE +#define CFG_USB_OHCI_SLOT_NAME "at91rm9200" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + #undef CONFIG_HARD_I2C #ifdef CONFIG_HARD_I2C @@ -123,7 +129,6 @@ #define CONFIG_BOOTDELAY 3 - #if !defined(CONFIG_HARD_I2C) #define CONFIG_TIMESTAMP #endif @@ -173,7 +178,7 @@ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ #define CFG_MEMTEST_START PHYS_SDRAM #define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 diff --git a/include/configs/trab.h b/include/configs/trab.h index 52bcbfc..dbccea2 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -80,10 +80,17 @@ #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* USB stuff */ -#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_OHCI_NEW 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_DOS_PARTITION 1 +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 + +#define CFG_USB_OHCI_REGS_BASE 0x14200000 +#define CFG_USB_OHCI_SLOT_NAME "s3c2400" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + /* * Size of malloc() pool */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index dd6d9ac..6a5b7f1 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -233,8 +233,15 @@ #ifdef CONFIG_440EP /* USB */ -#define CONFIG_USB_OHCI +#define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE +#define CFG_OHCI_BE_CONTROLLER + +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE (CFG_PERIPHERAL_BASE | 0x1000) +#define CFG_USB_OHCI_SLOT_NAME "ppc440" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 /* Comment this out to enable USB 1.1 device */ #define USB_2_0_DEVICE diff --git a/include/da9030.h b/include/da9030.h index 41108b9..3e3b202 100644 --- a/include/da9030.h +++ b/include/da9030.h @@ -104,3 +104,15 @@ #define SYS_CONTROL_A_HWRES_ENABLE (1<<2) #define SYS_CONTROL_A_WDOG_ACTION (1<<3) #define SYS_CONTROL_A_WATCHDOG (1<<7) + +#define MISC_CONTROLB_USB_INT_RISING (1<<2) +#define MISC_CONTROLB_SESSION_VALID_EN (1<<3) + +#define USB_PUMP_USBVE (1<<0) +#define USB_PUMP_USBVEP (1<<1) +#define USB_PUMP_SRP_DETECT (1<<2) +#define USB_PUMP_SESSION_VALID (1<<3) +#define USB_PUMP_VBUS_VALID_4_0 (1<<4) +#define USB_PUMP_VBUS_VALID_4_4 (1<<5) +#define USB_PUMP_EN_USBVE (1<<6) +#define USB_PUMP_EN_USBVEP (1<<7) diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 336c0ac..829dbf9 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -86,6 +86,8 @@ #define SPR_8360_REV12 0x80490012 #define SPR_8360E_REV20 0x80480020 #define SPR_8360_REV20 0x80490020 +#define SPR_8360E_REV21 0x80480021 +#define SPR_8360_REV21 0x80490021 #define SPR_8323E_REV10 0x80620010 #define SPR_8323_REV10 0x80630010 @@ -600,7 +602,9 @@ #define SCCR_TSEC1CM_3 0xC0000000 #define SCCR_TSEC1ON 0x20000000 +#define SCCR_TSEC1ON_SHIFT 29 #define SCCR_TSEC2ON 0x10000000 +#define SCCR_TSEC2ON_SHIFT 28 #endif diff --git a/include/usb.h b/include/usb.h index bf71554..4e1539f 100644 --- a/include/usb.h +++ b/include/usb.h @@ -169,7 +169,10 @@ struct usb_device { * this is how the lowlevel part communicate with the outer world */ -#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined (CONFIG_USB_SL811HS) +#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \ + defined(CONFIG_USB_OHCI_NEW) || defined (CONFIG_USB_SL811HS) || \ + defined(CONFIG_USB_ISP116X_HCD) + int usb_lowlevel_init(void); int usb_lowlevel_stop(void); int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len); @@ -177,6 +180,7 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int transfer_len,struct devrequest *setup); int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int transfer_len, int interval); +void usb_event_poll(void); /* Defines */ #define USB_UHCI_VEND_ID 0x8086 @@ -230,16 +234,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate); /* big endian -> little endian conversion */ /* some CPUs are already little endian e.g. the ARM920T */ -#ifdef LITTLEENDIAN -#define swap_16(x) ((unsigned short)(x)) -#define swap_32(x) ((unsigned long)(x)) -#else -#define swap_16(x) \ +#define __swap_16(x) \ ({ unsigned short x_ = (unsigned short)x; \ (unsigned short)( \ ((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8) ); \ }) -#define swap_32(x) \ +#define __swap_32(x) \ ({ unsigned long x_ = (unsigned long)x; \ (unsigned long)( \ ((x_ & 0x000000FFUL) << 24) | \ @@ -247,6 +247,13 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate); ((x_ & 0x00FF0000UL) >> 8) | \ ((x_ & 0xFF000000UL) >> 24) ); \ }) + +#ifdef LITTLEENDIAN +# define swap_16(x) (x) +# define swap_32(x) (x) +#else +# define swap_16(x) __swap_16(x) +# define swap_32(x) __swap_32(x) #endif /* LITTLEENDIAN */ /* diff --git a/include/usb_cdc_acm.h b/include/usb_cdc_acm.h new file mode 100644 index 0000000..87bf50c --- /dev/null +++ b/include/usb_cdc_acm.h @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2006 + * Bryan O'Donoghue, deckard@codehermit.ie, CodeHermit + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* ACM Control Requests */ +#define ACM_SEND_ENCAPSULATED_COMMAND 0x00 +#define ACM_GET_ENCAPSULATED_RESPONSE 0x01 +#define ACM_SET_COMM_FEATURE 0x02 +#define ACM_GET_COMM_FEATRUE 0x03 +#define ACM_CLEAR_COMM_FEATURE 0x04 +#define ACM_SET_LINE_ENCODING 0x20 +#define ACM_GET_LINE_ENCODING 0x21 +#define ACM_SET_CONTROL_LINE_STATE 0x22 +#define ACM_SEND_BREAK 0x23 + +/* ACM Notification Codes */ +#define ACM_NETWORK_CONNECTION 0x00 +#define ACM_RESPONSE_AVAILABLE 0x01 +#define ACM_SERIAL_STATE 0x20 + +/* Format of response expected by a ACM_GET_LINE_ENCODING request */ +struct rs232_emu{ + unsigned long dter; + unsigned char stop_bits; + unsigned char parity; + unsigned char data_bits; +}__attribute__((packed)); diff --git a/include/usbdcore.h b/include/usbdcore.h index 6e92df1..cb2be72 100644 --- a/include/usbdcore.h +++ b/include/usbdcore.h @@ -576,6 +576,9 @@ struct usb_device_instance { void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data); + /* Do cdc device specific control requests */ + int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb); + /* bus interface */ struct usb_bus_instance *bus; /* which bus interface driver */ diff --git a/include/usbdcore_mpc8xx.h b/include/usbdcore_mpc8xx.h new file mode 100644 index 0000000..9df62f4 --- /dev/null +++ b/include/usbdcore_mpc8xx.h @@ -0,0 +1,210 @@ +/* + * Copyright (C) 2006 Bryan O'Donoghue, CodeHermit + * bodonoghue@codehermit.ie + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <commproc.h> + +/* Mode Register */ +#define USMOD_EN 0x01 +#define USMOD_HOST 0x02 +#define USMOD_TEST 0x04 +#define USMOD_SFTE 0x08 +#define USMOD_RESUME 0x40 +#define USMOD_LSS 0x80 + +/* Endpoint Registers */ +#define USEP_RHS_NORM 0x00 +#define USEP_RHS_IGNORE 0x01 +#define USEP_RHS_NAK 0x02 +#define USEP_RHS_STALL 0x03 + +#define USEP_THS_NORM 0x00 +#define USEP_THS_IGNORE 0x04 +#define USEP_THS_NAK 0x08 +#define USEP_THS_STALL 0x0C + +#define USEP_RTE 0x10 +#define USEP_MF 0x20 + +#define USEP_TM_CONTROL 0x00 +#define USEP_TM_INT 0x100 +#define USEP_TM_BULK 0x200 +#define USEP_TM_ISO 0x300 + +/* Command Register */ +#define USCOM_EP0 0x00 +#define USCOM_EP1 0x01 +#define USCOM_EP2 0x02 +#define USCOM_EP3 0x03 + +#define USCOM_FLUSH 0x40 +#define USCOM_STR 0x80 + +/* Event Register */ +#define USB_E_RXB 0x0001 +#define USB_E_TXB 0x0002 +#define USB_E_BSY 0x0004 +#define USB_E_SOF 0x0008 +#define USB_E_TXE1 0x0010 +#define USB_E_TXE2 0x0020 +#define USB_E_TXE3 0x0040 +#define USB_E_TXE4 0x0080 +#define USB_TX_ERRMASK (USB_E_TXE1|USB_E_TXE2|USB_E_TXE3|USB_E_TXE4) +#define USB_E_IDLE 0x0100 +#define USB_E_RESET 0x0200 + +/* Mask Register */ +#define USBS_IDLE 0x01 + +/* RX Buffer Descriptor */ +#define RX_BD_OV 0x02 +#define RX_BD_CR 0x04 +#define RX_BD_AB 0x08 +#define RX_BD_NO 0x10 +#define RX_BD_PID_DATA0 0x00 +#define RX_BD_PID_DATA1 0x40 +#define RX_BD_PID_SETUP 0x80 +#define RX_BD_F 0x400 +#define RX_BD_L 0x800 +#define RX_BD_I 0x1000 +#define RX_BD_W 0x2000 +#define RX_BD_E 0x8000 + +/* Useful masks */ +#define RX_BD_PID_BITMASK (RX_BD_PID_DATA1 | RX_BD_PID_SETUP) +#define STALL_BITMASK (USEP_THS_STALL | USEP_RHS_STALL) +#define NAK_BITMASK (USEP_THS_NAK | USEP_RHS_NAK) +#define CBD_TX_BITMASK (TX_BD_R | TX_BD_L | TX_BD_TC | TX_BD_I | TX_BD_CNF) + +/* TX Buffer Descriptor */ +#define TX_BD_UN 0x02 +#define TX_BD_TO 0x04 +#define TX_BD_NO_PID 0x00 +#define TX_BD_PID_DATA0 0x80 +#define TX_BD_PID_DATA1 0xC0 +#define TX_BD_CNF 0x200 +#define TX_BD_TC 0x400 +#define TX_BD_L 0x800 +#define TX_BD_I 0x1000 +#define TX_BD_W 0x2000 +#define TX_BD_R 0x8000 + +/* Implementation specific defines */ + +#define EP_MIN_PACKET_SIZE 0x08 +#define MAX_ENDPOINTS 0x04 +#define FIFO_SIZE 0x10 +#define EP_MAX_PKT FIFO_SIZE +#define TX_RING_SIZE 0x04 +#define RX_RING_SIZE 0x06 +#define USB_MAX_PKT 0x40 +#define TOGGLE_TX_PID(x) x= ((~x)&0x40)|0x80 +#define TOGGLE_RX_PID(x) x^= 0x40 +#define EP_ATTACHED 0x01 /* Endpoint has a urb attached or not */ +#define EP_SEND_ZLP 0x02 /* Send ZLP y/n ? */ + +#define PROFF_USB 0x00000000 +#define CPM_USB_BASE 0x00000A00 + +/* UDC device defines */ +#define EP0_MAX_PACKET_SIZE EP_MAX_PKT +#define UDC_OUT_ENDPOINT 0x02 +#define UDC_OUT_PACKET_SIZE EP_MIN_PACKET_SIZE +#define UDC_IN_ENDPOINT 0x03 +#define UDC_IN_PACKET_SIZE EP_MIN_PACKET_SIZE +#define UDC_INT_ENDPOINT 0x01 +#define UDC_INT_PACKET_SIZE UDC_IN_PACKET_SIZE +#define UDC_BULK_PACKET_SIZE EP_MIN_PACKET_SIZE + +struct mpc8xx_ep { + struct urb * urb; + unsigned char pid; + unsigned char sc; + volatile cbd_t * prx; +}; + +typedef struct mpc8xx_usb{ + char usmod; /* Mode Register */ + char usaddr; /* Slave Address Register */ + char uscom; /* Command Register */ + char res1; /* Reserved */ + ushort usep[4]; + ulong res2; /* Reserved */ + ushort usber; /* Event Register */ + ushort res3; /* Reserved */ + ushort usbmr; /* Mask Register */ + char res4; /* Reserved */ + char usbs; /* Status Register */ + char res5[8]; /* Reserved */ +}usb_t; + +typedef struct mpc8xx_parameter_ram{ + ushort ep0ptr; /* Endpoint Pointer Register 0 */ + ushort ep1ptr; /* Endpoint Pointer Register 1 */ + ushort ep2ptr; /* Endpoint Pointer Register 2 */ + ushort ep3ptr; /* Endpoint Pointer Register 3 */ + uint rstate; /* Receive state */ + uint rptr; /* Receive internal data pointer */ + ushort frame_n; /* Frame number */ + ushort rbcnt; /* Receive byte count */ + uint rtemp; /* Receive temp cp use only */ + uint rxusb; /* Rx Data Temp */ + ushort rxuptr; /* Rx microcode return address temp */ +}usb_pram_t; + +typedef struct endpoint_parameter_block_pointer{ + ushort rbase; /* RxBD base address */ + ushort tbase; /* TxBD base address */ + char rfcr; /* Rx Function code */ + char tfcr; /* Tx Function code */ + ushort mrblr; /* Maximum Receive Buffer Length */ + ushort rbptr; /* RxBD pointer Next Buffer Descriptor */ + ushort tbptr; /* TxBD pointer Next Buffer Descriptor */ + ulong tstate; /* Transmit internal state */ + ulong tptr; /* Transmit internal data pointer */ + ushort tcrc; /* Transmit temp CRC */ + ushort tbcnt; /* Transmit internal bye count */ + ulong ttemp; /* Tx temp */ + ushort txuptr; /* Tx microcode return address */ + ushort res1; /* Reserved */ +}usb_epb_t; + +typedef enum mpc8xx_udc_state{ + STATE_NOT_READY, + STATE_ERROR, + STATE_READY, +}mpc8xx_udc_state_t; + +/* Declarations */ +int udc_init(void); +void udc_irq(void); +int udc_endpoint_write(struct usb_endpoint_instance *endpoint); +void udc_setup_ep(struct usb_device_instance *device, unsigned int ep, + struct usb_endpoint_instance *endpoint); +void udc_connect(void); +void udc_disconnect(void); +void udc_enable(struct usb_device_instance *device); +void udc_disable(void); +void udc_startup_events(struct usb_device_instance *device); + +/* Flow control */ +void udc_set_nak(int epid); +void udc_unset_nak (int epid); diff --git a/include/usbdcore_omap1510.h b/include/usbdcore_omap1510.h index 6ea3331..526fcd9 100644 --- a/include/usbdcore_omap1510.h +++ b/include/usbdcore_omap1510.h @@ -161,10 +161,20 @@ #define UDC_VBUS_CTRL (1 << 19) #define UDC_VBUS_MODE (1 << 18) - -void omap1510_udc_irq(void); -void omap1510_udc_noniso_irq(void); - +/* OMAP Endpoint parameters */ +#define EP0_MAX_PACKET_SIZE 64 +#define UDC_OUT_ENDPOINT 2 +#define UDC_OUT_PACKET_SIZE 64 +#define UDC_IN_ENDPOINT 1 +#define UDC_IN_PACKET_SIZE 64 +#define UDC_INT_ENDPOINT 5 +#define UDC_INT_PKTSIZE 16 +#define UDC_BULK_PKTSIZE 16 + +void udc_irq (void); +/* Flow control */ +void udc_set_nak(int epid); +void udc_unset_nak (int epid); /* Higher level functions for abstracting away from specific device */ void udc_endpoint_write(struct usb_endpoint_instance *endpoint); diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h index 2d9f739..a752097 100644 --- a/include/usbdescriptors.h +++ b/include/usbdescriptors.h @@ -92,33 +92,42 @@ #define COMMUNICATIONS_DEVICE_CLASS 0x02 /* c.f. CDC 4.2 Table 15 */ -#define COMMUNICATIONS_INTERFACE_CLASS 0x02 +#define COMMUNICATIONS_INTERFACE_CLASS_CONTROL 0x02 +#define COMMUNICATIONS_INTERFACE_CLASS_DATA 0x0A +#define COMMUNICATIONS_INTERFACE_CLASS_VENDOR 0x0FF /* c.f. CDC 4.3 Table 16 */ -#define COMMUNICATIONS_NO_SUBCLASS 0x00 +#define COMMUNICATIONS_NO_SUBCLASS 0x00 #define COMMUNICATIONS_DLCM_SUBCLASS 0x01 -#define COMMUNICATIONS_ACM_SUBCLASS 0x02 -#define COMMUNICATIONS_TCM_SUBCLASS 0x03 +#define COMMUNICATIONS_ACM_SUBCLASS 0x02 +#define COMMUNICATIONS_TCM_SUBCLASS 0x03 #define COMMUNICATIONS_MCCM_SUBCLASS 0x04 -#define COMMUNICATIONS_CCM_SUBCLASS 0x05 +#define COMMUNICATIONS_CCM_SUBCLASS 0x05 #define COMMUNICATIONS_ENCM_SUBCLASS 0x06 #define COMMUNICATIONS_ANCM_SUBCLASS 0x07 /* c.f. WMCD 5.1 */ #define COMMUNICATIONS_WHCM_SUBCLASS 0x08 -#define COMMUNICATIONS_DMM_SUBCLASS 0x09 +#define COMMUNICATIONS_DMM_SUBCLASS 0x09 #define COMMUNICATIONS_MDLM_SUBCLASS 0x0a #define COMMUNICATIONS_OBEX_SUBCLASS 0x0b -/* c.f. CDC 4.6 Table 18 */ +/* c.f. CDC 4.4 Table 17 */ +#define COMMUNICATIONS_NO_PROTOCOL 0x00 +#define COMMUNICATIONS_V25TER_PROTOCOL 0x01 /*Common AT Hayes compatible*/ + +/* c.f. CDC 4.5 Table 18 */ #define DATA_INTERFACE_CLASS 0x0a +/* c.f. CDC 4.6 No Table */ +#define DATA_INTERFACE_SUBCLASS_NONE 0x00 /* No subclass pertinent */ + /* c.f. CDC 4.7 Table 19 */ -#define COMMUNICATIONS_NO_PROTOCOL 0x00 +#define DATA_INTERFACE_PROTOCOL_NONE 0x00 /* No class protcol required */ /* c.f. CDC 5.2.3 Table 24 */ -#define CS_INTERFACE 0x24 +#define CS_INTERFACE 0x24 #define CS_ENDPOINT 0x25 /* @@ -128,7 +137,7 @@ * c.f. WMCD 5.3 Table 5.3 */ -#define USB_ST_HEADER 0x00 +#define USB_ST_HEADER 0x00 #define USB_ST_CMF 0x01 #define USB_ST_ACMF 0x02 #define USB_ST_DLMF 0x03 @@ -137,18 +146,18 @@ #define USB_ST_UF 0x06 #define USB_ST_CSF 0x07 #define USB_ST_TOMF 0x08 -#define USB_ST_USBTF 0x09 +#define USB_ST_USBTF 0x09 #define USB_ST_NCT 0x0a #define USB_ST_PUF 0x0b #define USB_ST_EUF 0x0c #define USB_ST_MCMF 0x0d #define USB_ST_CCMF 0x0e #define USB_ST_ENF 0x0f -#define USB_ST_ATMNF 0x10 +#define USB_ST_ATMNF 0x10 #define USB_ST_WHCM 0x11 #define USB_ST_MDLM 0x12 -#define USB_ST_MDLMD 0x13 +#define USB_ST_MDLMD 0x13 #define USB_ST_DMM 0x14 #define USB_ST_OBEX 0x15 #define USB_ST_CS 0x16 @@ -312,7 +321,8 @@ struct usb_class_union_function_descriptor { u8 bDescriptorType; u8 bDescriptorSubtype; /* 0x06 */ u8 bMasterInterface; - u8 bSlaveInterface0[0]; + /* u8 bSlaveInterface0[0]; */ + u8 bSlaveInterface0; } __attribute__ ((packed)); struct usb_class_country_selection_descriptor { |