diff options
Diffstat (limited to 'include')
116 files changed, 3598 insertions, 2191 deletions
diff --git a/include/altera.h b/include/altera.h index 7a2bece..6aad5ee 100644 --- a/include/altera.h +++ b/include/altera.h @@ -27,23 +27,6 @@ #ifndef _ALTERA_H_ #define _ALTERA_H_ -/* Altera Model definitions - *********************************************************************/ -#define CONFIG_SYS_ACEX1K CONFIG_SYS_FPGA_DEV( 0x1 ) -#define CONFIG_SYS_CYCLON2 CONFIG_SYS_FPGA_DEV( 0x2 ) -#define CONFIG_SYS_STRATIX_II CONFIG_SYS_FPGA_DEV( 0x4 ) - -#define CONFIG_SYS_ALTERA_ACEX1K (CONFIG_SYS_FPGA_ALTERA | CONFIG_SYS_ACEX1K) -#define CONFIG_SYS_ALTERA_CYCLON2 (CONFIG_SYS_FPGA_ALTERA | CONFIG_SYS_CYCLON2) -#define CONFIG_SYS_ALTERA_STRATIX_II (CONFIG_SYS_FPGA_ALTERA | CONFIG_SYS_STRATIX_II) -/* Add new models here */ - -/* Altera Interface definitions - *********************************************************************/ -#define CONFIG_SYS_ALTERA_IF_PS CONFIG_SYS_FPGA_IF( 0x1 ) /* passive serial */ -#define CONFIG_SYS_ALTERA_IF_FPP CONFIG_SYS_FPGA_IF( 0x2 ) /* fast passive parallel */ -/* Add new interfaces here */ - typedef enum { /* typedef Altera_iface */ min_altera_iface_type, /* insert all new types after this */ passive_serial, /* serial data and external clock */ diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index a9aa8ba..a4bfdac 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -61,14 +61,6 @@ typedef struct bd_info { #if defined(CONFIG_MPC83xx) unsigned long bi_immrbar; #endif -#if defined(CONFIG_MPC8220) - unsigned long bi_mbar_base; /* base of internal registers */ - unsigned long bi_inpfreq; /* Input Freq, In MHz */ - unsigned long bi_pcifreq; /* PCI Freq, in MHz */ - unsigned long bi_pevfreq; /* PEV Freq, in MHz */ - unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */ - unsigned long bi_vcofreq; /* VCO Freq, in MHz */ -#endif unsigned long bi_bootflags; /* boot / reboot flag (Unused) */ unsigned long bi_ip_addr; /* IP Address */ unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */ diff --git a/include/atmel_mci.h b/include/atmel_mci.h index c711881..31c4569 100644 --- a/include/atmel_mci.h +++ b/include/atmel_mci.h @@ -52,6 +52,8 @@ typedef struct atmel_mci { u32 ier; /* 0x44 */ u32 idr; /* 0x48 */ u32 imr; /* 0x4c */ + u32 reserved[43]; + u32 version; } atmel_mci_t; #endif /* __ASSEMBLY__ */ diff --git a/include/bootstage.h b/include/bootstage.h index 3b2216b..ef07a87 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -37,6 +37,24 @@ enum bootstage_flags { BOOTSTAGEF_ALLOC = 1 << 1, /* Allocate an id */ }; +/* bootstate sub-IDs used for kernel and ramdisk ranges */ +enum { + BOOTSTAGE_SUB_FORMAT, + BOOTSTAGE_SUB_FORMAT_OK, + BOOTSTAGE_SUB_NO_UNIT_NAME, + BOOTSTAGE_SUB_UNIT_NAME, + BOOTSTAGE_SUB_SUBNODE, + + BOOTSTAGE_SUB_CHECK, + BOOTSTAGE_SUB_HASH = 5, + BOOTSTAGE_SUB_CHECK_ARCH = 5, + BOOTSTAGE_SUB_CHECK_ALL, + BOOTSTAGE_SUB_GET_DATA, + BOOTSTAGE_SUB_CHECK_ALL_OK = 7, + BOOTSTAGE_SUB_GET_DATA_OK, + BOOTSTAGE_SUB_LOAD, +}; + /* * A list of boot stages that we know about. Each of these indicates the * state that we are at, and the action that we are about to perform. For @@ -137,43 +155,24 @@ enum bootstage_id { BOOTSTAGE_ID_NET_DONE_ERR, BOOTSTAGE_ID_NET_DONE, + BOOTSTAGE_ID_FIT_FDT_START = 90, /* * Boot stages related to loading a FIT image. Some of these are a * bit wonky. */ - BOOTSTAGE_ID_FIT_FORMAT = 100, - BOOTSTAGE_ID_FIT_NO_UNIT_NAME, - BOOTSTAGE_ID_FIT_UNIT_NAME, - BOOTSTAGE_ID_FIT_CONFIG, - BOOTSTAGE_ID_FIT_CHECK_SUBIMAGE, - BOOTSTAGE_ID_FIT_CHECK_HASH = 104, - - BOOTSTAGE_ID_FIT_CHECK_ARCH, - BOOTSTAGE_ID_FIT_CHECK_KERNEL, - BOOTSTAGE_ID_FIT_CHECKED, - - BOOTSTAGE_ID_FIT_KERNEL_INFO_ERR = 107, - BOOTSTAGE_ID_FIT_KERNEL_INFO, + BOOTSTAGE_ID_FIT_KERNEL_START = 100, + + BOOTSTAGE_ID_FIT_CONFIG = 110, BOOTSTAGE_ID_FIT_TYPE, + BOOTSTAGE_ID_FIT_KERNEL_INFO, BOOTSTAGE_ID_FIT_COMPRESSION, BOOTSTAGE_ID_FIT_OS, BOOTSTAGE_ID_FIT_LOADADDR, BOOTSTAGE_ID_OVERWRITTEN, - BOOTSTAGE_ID_FIT_RD_FORMAT = 120, - BOOTSTAGE_ID_FIT_RD_FORMAT_OK, - BOOTSTAGE_ID_FIT_RD_NO_UNIT_NAME, - BOOTSTAGE_ID_FIT_RD_UNIT_NAME, - BOOTSTAGE_ID_FIT_RD_SUBNODE, - - BOOTSTAGE_ID_FIT_RD_CHECK, - BOOTSTAGE_ID_FIT_RD_HASH = 125, - BOOTSTAGE_ID_FIT_RD_CHECK_ALL, - BOOTSTAGE_ID_FIT_RD_GET_DATA, - BOOTSTAGE_ID_FIT_RD_CHECK_ALL_OK = 127, - BOOTSTAGE_ID_FIT_RD_GET_DATA_OK, - BOOTSTAGE_ID_FIT_RD_LOAD, + /* Next 10 IDs used by BOOTSTAGE_SUB_... */ + BOOTSTAGE_ID_FIT_RD_START = 120, /* Ramdisk stages */ BOOTSTAGE_ID_IDE_FIT_READ = 140, BOOTSTAGE_ID_IDE_FIT_READ_OK, @@ -221,7 +220,7 @@ enum bootstage_id { */ ulong timer_get_boot_us(void); -#ifndef CONFIG_SPL_BUILD +#if !defined(CONFIG_SPL_BUILD) && !defined(USE_HOSTCC) /* * Board code can implement show_boot_progress() if needed. * @@ -233,10 +232,21 @@ void show_boot_progress(int val); #define show_boot_progress(val) do {} while (0) #endif -#if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) && \ + !defined(USE_HOSTCC) /* This is the full bootstage implementation */ /** + * Relocate existing bootstage records + * + * Call this after relocation has happened and after malloc has been initted. + * We need to copy any pointers in bootstage records that were added pre- + * relocation, since memory can be overritten later. + * @return Always returns 0, to indicate success + */ +int bootstage_relocate(void); + +/** * Add a new bootstage record * * @param id Bootstage ID to use (ignored if flags & BOOTSTAGEF_ALLOC) @@ -257,6 +267,19 @@ ulong bootstage_error(enum bootstage_id id); ulong bootstage_mark_name(enum bootstage_id id, const char *name); /** + * Mark a time stamp in the given function and line number + * + * See BOOTSTAGE_MARKER() for a convenient macro. + * + * @param file Filename to record (NULL if none) + * @param func Function name to record + * @param linenum Line number to record + * @return recorded time stamp + */ +ulong bootstage_mark_code(const char *file, const char *func, + int linenum); + +/** * Mark the start of a bootstage activity. The end will be marked later with * bootstage_accum() and at that point we accumulate the time taken. Calling * this function turns the given id into a accumulator rather than and @@ -315,11 +338,22 @@ int bootstage_stash(void *base, int size); int bootstage_unstash(void *base, int size); #else +static inline ulong bootstage_add_record(enum bootstage_id id, + const char *name, int flags, ulong mark) +{ + return 0; +} + /* * This is a dummy implementation which just calls show_boot_progress(), * and won't even do that unless CONFIG_SHOW_BOOT_PROGRESS is defined */ +static inline int bootstage_relocate(void) +{ + return 0; +} + static inline ulong bootstage_mark(enum bootstage_id id) { show_boot_progress(id); @@ -337,6 +371,22 @@ static inline ulong bootstage_mark_name(enum bootstage_id id, const char *name) return 0; } +static inline ulong bootstage_mark_code(const char *file, const char *func, + int linenum) +{ + return 0; +} + +static inline uint32_t bootstage_start(enum bootstage_id id, const char *name) +{ + return 0; +} + +static inline uint32_t bootstage_accum(enum bootstage_id id) +{ + return 0; +} + static inline int bootstage_stash(void *base, int size) { return 0; /* Pretend to succeed */ @@ -348,4 +398,8 @@ static inline int bootstage_unstash(void *base, int size) } #endif /* CONFIG_BOOTSTAGE */ +/* Helper macro for adding a bootstage to a line of code */ +#define BOOTSTAGE_MARKER() \ + bootstage_mark_code(__FILE__, __func__, __LINE__) + #endif diff --git a/include/common.h b/include/common.h index 8a1f3e4..126891d 100644 --- a/include/common.h +++ b/include/common.h @@ -71,8 +71,6 @@ typedef volatile unsigned char vu_char; #include <mpc5xxx.h> #elif defined(CONFIG_MPC512X) #include <asm/immap_512x.h> -#elif defined(CONFIG_MPC8220) -#include <asm/immap_8220.h> #elif defined(CONFIG_8260) #if defined(CONFIG_MPC8247) \ || defined(CONFIG_MPC8248) \ @@ -199,18 +197,35 @@ typedef void (interrupt_handler_t)(void *); * General Purpose Utilities */ #define min(X, Y) \ - ({ typeof (X) __x = (X); \ - typeof (Y) __y = (Y); \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ (__x < __y) ? __x : __y; }) #define max(X, Y) \ - ({ typeof (X) __x = (X); \ - typeof (Y) __y = (Y); \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ (__x > __y) ? __x : __y; }) #define MIN(x, y) min(x, y) #define MAX(x, y) max(x, y) +#define min3(X, Y, Z) \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ + typeof(Z) __z = (Z); \ + __x < __y ? (__x < __z ? __x : __z) : \ + (__y < __z ? __y : __z); }) + +#define max3(X, Y, Z) \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ + typeof(Z) __z = (Z); \ + __x > __y ? (__x > __z ? __x : __z) : \ + (__y > __z ? __y : __z); }) + +#define MIN3(x, y, z) min3(x, y, z) +#define MAX3(x, y, z) max3(x, y, z) + /* * Return the absolute value of a number. * @@ -295,9 +310,6 @@ int readline_into_buffer(const char *const prompt, char *buffer, int parse_line (char *, char *[]); void init_cmd_timeout(void); void reset_cmd_timeout(void); -#ifdef CONFIG_MENU -int abortboot(int bootdelay); -#endif extern char console_buffer[]; /* arch/$(ARCH)/lib/board.c */ @@ -323,6 +335,16 @@ int update_flash_size(int flash_size); */ void board_show_dram(ulong size); +/** + * arch_fixup_memory_node() - Write arch-specific memory information to fdt + * + * Defined in arch/$(ARCH)/lib/bootm.c + * + * @blob: FDT blob to write to + * @return 0 if ok, or -ve FDT_ERR_... on failure + */ +int arch_fixup_memory_node(void *blob); + /* common/flash.c */ void flash_perror (int); @@ -556,7 +578,6 @@ void trap_init (ulong); defined (CONFIG_74x) || \ defined (CONFIG_75x) || \ defined (CONFIG_74xx) || \ - defined (CONFIG_MPC8220) || \ defined (CONFIG_MPC85xx) || \ defined (CONFIG_MPC86xx) || \ defined (CONFIG_MPC83xx) @@ -648,9 +669,6 @@ int prt_8260_clks (void); #elif defined(CONFIG_MPC5xxx) int prt_mpc5xxx_clks (void); #endif -#if defined(CONFIG_MPC8220) -int prt_mpc8220_clks (void); -#endif #ifdef CONFIG_4xx ulong get_OPB_freq (void); ulong get_PCI_freq (void); diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index 53a2f05..d847069 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -40,6 +40,7 @@ #define CONFIG_CMD_FDOS /* Floppy DOS support */ #define CONFIG_CMD_FLASH /* flinfo, erase, protect */ #define CONFIG_CMD_FPGA /* FPGA configuration Support */ +#define CONFIG_CMD_FUSE /* Device fuse support */ #define CONFIG_CMD_GETTIME /* Get time since boot */ #define CONFIG_CMD_HASH /* calculate hash / digest */ #define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */ diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h deleted file mode 100644 index 39c29ec..0000000 --- a/include/configs/Alaska8220.h +++ /dev/null @@ -1,334 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_ALASKA8220 1 /* ... on Alaska board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ - -/* Define this for PSC console -#define CONFIG_PSC_CONSOLE 1 -*/ - -#define CONFIG_EXTUART_CONSOLE 1 - -#ifdef CONFIG_EXTUART_CONSOLE -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_SERIAL -# define CONFIG_SYS_NS16550 -# define CONFIG_SYS_NS16550_REG_SIZE 1 -# define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008) -# define CONFIG_SYS_NS16550_CLK 18432000 -#endif - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -#define CONFIG_MII - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" -#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 -#define CONFIG_IPADDR 192.162.1.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.162.1.1 -#define CONFIG_GATEWAYIP 192.162.1.1 -#define CONFIG_HOSTNAME Alaska -#define CONFIG_OVERWRITE_ETHADDR_ONCE - - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 -/* -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 256 -*/ - -/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD. - else undefined it will boot from Intel Strata flash */ -#define CONFIG_SYS_AMD_BOOT 1 - -/* - * Flexbus Chipselect configuration - */ -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_CS0_BASE 0xfff0 -#define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS0_CTRL 0x003f0d40 - -#define CONFIG_SYS_CS1_BASE 0xfe00 -#define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS1_CTRL 0x003f1540 -#else -#define CONFIG_SYS_CS0_BASE 0xff00 -#define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS0_CTRL 0x003f1540 - -#define CONFIG_SYS_CS1_BASE 0xfe08 -#define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS1_CTRL 0x003f0d40 -#endif - -#define CONFIG_SYS_CS2_BASE 0xf100 -#define CONFIG_SYS_CS2_MASK 0x00040000 -#define CONFIG_SYS_CS2_CTRL 0x003f1140 - -#define CONFIG_SYS_CS3_BASE 0xf200 -#define CONFIG_SYS_CS3_MASK 0x00040000 -#define CONFIG_SYS_CS3_CTRL 0x003f1100 - - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16) - -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE -#else -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000 -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE -#endif - -#define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16) -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16) - - -#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ -#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ - -#define CONFIG_SYS_FLASH_CHECKSUM -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE -#else -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE -#endif - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 2 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x40 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ - -/* SDRAM drive strength register */ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x18 - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -/* - * JFFS2 partitions - */ - -/* No command line, one static partition */ -/* -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0x00400000 -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 -*/ - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=alaska-0" -#define MTDPARTS_DEFAULT "mtdparts=alaska-0:4m(user)" -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index b09119a..1c9d08e 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -36,7 +36,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE -#define CONFIG_E6500 #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ @@ -528,6 +527,15 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SF_DEFAULT_MODE 0 /* + * MAPLE + */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_MAPLE_MEM_PHYS 0xFA0000000ull +#else +#define CONFIG_SYS_MAPLE_MEM_PHYS 0xA0000000 +#endif + +/* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ @@ -623,7 +631,11 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_FMAN_ENET #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10 #define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11 -#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 + +/*B4860 QDS AMC2PEX-2S default PHY_ADDR */ +#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/ +#define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6 /*SLOT 2*/ + #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 1bc2c5a..536b755 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -238,7 +238,7 @@ /* FPGA - Spartan 2 */ /* experiment -#define CONFIG_FPGA CONFIG_SYS_SPARTAN3 +#define CONFIG_FPGA #define CONFIG_FPGA_COUNT 1 #define CONFIG_SYS_FPGA_PROG_FEEDBACK #define CONFIG_SYS_FPGA_CHECK_CTRLC diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h index c296e3c..30fb6c2 100644 --- a/include/configs/MERGERBOX.h +++ b/include/configs/MERGERBOX.h @@ -606,7 +606,7 @@ * FPGA */ #define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2 +#define CONFIG_FPGA #define CONFIG_FPGA_ALTERA #define CONFIG_FPGA_CYCLON2 diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index 6850965..7271468 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -310,7 +310,7 @@ #undef FPGA_DEBUG #undef CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2 +#define CONFIG_FPGA #define CONFIG_FPGA_ALTERA 1 #define CONFIG_FPGA_CYCLON2 1 #define CONFIG_FPGA_COUNT 1 diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index a99ad3c..a9c00ac 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -499,7 +499,7 @@ "" #define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2 +#define CONFIG_FPGA #define CONFIG_FPGA_ALTERA #define CONFIG_FPGA_CYCLON2 diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h index bf2f44e..5d2ff14 100644 --- a/include/configs/MVSMR.h +++ b/include/configs/MVSMR.h @@ -280,7 +280,7 @@ #undef FPGA_DEBUG #undef CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_FPGA CONFIG_SYS_XILINX_SPARTAN2 +#define CONFIG_FPGA #define CONFIG_FPGA_XILINX 1 #define CONFIG_FPGA_SPARTAN2 1 #define CONFIG_FPGA_COUNT 1 diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 8b13b10..69412e4 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -316,7 +316,6 @@ #define CONFIG_SYS_HUSH_PARSER /* Video */ -#define CONFIG_FSL_DIU_FB #ifdef CONFIG_FSL_DIU_FB #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) @@ -336,7 +335,6 @@ #endif #ifndef CONFIG_FSL_DIU_FB -#define CONFIG_ATI #endif #ifdef CONFIG_ATI diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 76b3ca6..6dd5c0d 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -25,7 +25,6 @@ */ #define CONFIG_T4240QDS #define CONFIG_PHYS_64BIT -#define CONFIG_PPC_T4240 #define CONFIG_FSL_SATA_V2 #define CONFIG_PCIE4 diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h deleted file mode 100644 index 5f925b3..0000000 --- a/include/configs/Yukon8220.h +++ /dev/null @@ -1,326 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_YUKON8220 1 /* ... on Yukon board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ - -/* Define this for PSC console -#define CONFIG_PSC_CONSOLE 1 -*/ - -#define CONFIG_EXTUART_CONSOLE 1 - -#ifdef CONFIG_EXTUART_CONSOLE -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_SERIAL -# define CONFIG_SYS_NS16550 -# define CONFIG_SYS_NS16550_REG_SIZE 1 -# define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008) -# define CONFIG_SYS_NS16550_CLK 18432000 -#endif - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -#define CONFIG_MII - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" -#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 -#define CONFIG_IPADDR 192.162.1.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.162.1.1 -#define CONFIG_GATEWAYIP 192.162.1.1 -#define CONFIG_HOSTNAME yukon -#define CONFIG_OVERWRITE_ETHADDR_ONCE - - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 -/* -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 256 -*/ - -/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD. - else undefined it will boot from Intel Strata flash */ -#define CONFIG_SYS_AMD_BOOT 1 - -/* - * Flexbus Chipselect configuration - */ -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_CS0_BASE 0xfff0 -#define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS0_CTRL 0x003f0d40 - -#define CONFIG_SYS_CS1_BASE 0xfe00 -#define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS1_CTRL 0x003f1540 -#else -#define CONFIG_SYS_CS0_BASE 0xff00 -#define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS0_CTRL 0x003f1540 - -#define CONFIG_SYS_CS1_BASE 0xfe08 -#define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS1_CTRL 0x003f0d40 -#endif - -#define CONFIG_SYS_CS2_BASE 0xf100 -#define CONFIG_SYS_CS2_MASK 0x00040000 -#define CONFIG_SYS_CS2_CTRL 0x003f1140 - -#define CONFIG_SYS_CS3_BASE 0xf200 -#define CONFIG_SYS_CS3_MASK 0x00040000 -#define CONFIG_SYS_CS3_CTRL 0x003f1100 - - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16) - -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE -#else -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000 -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE -#endif - -#define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16) -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16) - - -#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ -#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ - -#define CONFIG_SYS_FLASH_CHECKSUM -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE -#else -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE -#endif - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#ifndef CONFIG_SYS_JFFS2_FIRST_SECTOR -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0 -#endif -#ifndef CONFIG_SYS_JFFS2_FIRST_BANK -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#endif -#ifndef CONFIG_SYS_JFFS2_NUM_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 -#endif -#define CONFIG_SYS_JFFS2_LAST_BANK (CONFIG_SYS_JFFS2_FIRST_BANK + CONFIG_SYS_JFFS2_NUM_BANKS - 1) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 2 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x40 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ - -/* SDRAM drive strength register */ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x18 - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#endif /* __CONFIG_H */ diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index ac7e877..7cb10fb 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -368,6 +368,11 @@ #define CONFIG_SYS_I2C_SLAVE 0x7F /* + * IIM - IC Identification Module + */ +#undef CONFIG_FSL_IIM + +/* * EEPROM configuration for Atmel AT24C01: * 8-bit addresses, 30ms write delay, 32-Byte Page Write Mode */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index ef00306..cd2c078 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -17,6 +17,7 @@ #define __CONFIG_AM335X_EVM_H #define CONFIG_AM33XX +#define CONFIG_OMAP #include <asm/arch/omap.h> @@ -196,7 +197,6 @@ + (8 * 1024 * 1024)) #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC @@ -260,12 +260,11 @@ /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SERIAL_MULTI #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ @@ -295,6 +294,9 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + #define CONFIG_ENV_OVERWRITE 1 #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -303,8 +305,13 @@ /* Defines for SPL */ #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK +/* + * Place the image at the start of the ROM defined image space. + * We limit our size to the ROM-defined downloaded image area, and use the + * rest of the space for stack. + */ #define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (101 * 1024) +#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SPL_BSS_START_ADDR 0x80000000 @@ -360,11 +367,7 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_SYS_NAND_ECCSTEPS 4 -#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ - CONFIG_SYS_NAND_ECCSTEPS) - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 diff --git a/include/configs/aria.h b/include/configs/aria.h index b425399..5318aaf 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -383,7 +383,7 @@ /* * IIM - IC Identification Module */ -#undef CONFIG_IIM +#undef CONFIG_FSL_IIM /* * EEPROM configuration for Atmel AT24C32A-10TQ-2.7: diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index ebcc69a..4328944 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -105,6 +105,8 @@ #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT #define CONFIG_CMD_USB 1 /* @@ -128,6 +130,24 @@ (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) #endif +/* + * The (arm)linux board id set by generic code depending on configured board + * (see boards.cfg for different boards) + */ +#ifdef CONFIG_AT91SAM9G20 + /* the sam9g20 variants have two different board ids */ +# ifdef CONFIG_AT91SAM9G20EK_2MMC + /* we may be setup for the 2MMC variant of at91sam9g20ek */ +# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK_2MMC +# else + /* or the normal at91sam9g20ek */ +# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK +# endif +#else + /* otherwise default to good old at91sam9260ek */ +# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK +#endif + /* DataFlash */ #ifndef CONFIG_AT91SAM9G20EK_2MMC #define CONFIG_ATMEL_DATAFLASH_SPI @@ -158,6 +178,18 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 #endif +/* MMC */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +/* FAT */ +#ifdef CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + /* NOR flash - no real flash on this board */ #define CONFIG_SYS_NO_FLASH 1 @@ -170,13 +202,11 @@ /* USB */ #define CONFIG_USB_ATMEL #define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE 1 -#define CONFIG_CMD_FAT 1 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ @@ -211,7 +241,7 @@ "mtdparts=atmel_nand:-(root) " \ "rw rootfstype=jffs2" -#else /* CONFIG_SYS_USE_NANDFLASH */ +#elif defined(CONFIG_SYS_USE_NANDFLASH) /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_ENV_IS_IN_NAND 1 @@ -226,6 +256,22 @@ "512k(dtb),6M(kernel)ro,-(rootfs) " \ "root=/dev/mtdblock7 rw rootfstype=jffs2" +#else /* CONFIG_SYS_USE_MMC */ +/* bootstrap + u-boot + env + linux in mmc */ +#define CONFIG_ENV_IS_IN_MMC +/* For FAT system, most cases it should be in the reserved sector */ +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#define CONFIG_BOOTCOMMAND \ + "fatload mmc 0:1 0x22000000 uImage; bootm" +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" #endif #define CONFIG_SYS_PROMPT "U-Boot> " diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h new file mode 100644 index 0000000..8d2673d --- /dev/null +++ b/include/configs/at91sam9n12ek.h @@ -0,0 +1,232 @@ +/* + * (C) Copyright 2013 Atmel Corporation. + * Josh Wu <josh.wu@atmel.com> + * + * Configuation settings for the AT91SAM9N12-EK boards. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __AT91SAM9N12_CONFIG_H_ +#define __AT91SAM9N12_CONFIG_H_ + +/* + * SoC must be defined first, before hardware.h is included. + * In this case SoC is defined in boards.cfg. + */ +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x26f00000 + +#define CONFIG_ARM926EJS +#define CONFIG_AT91FAMILY + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ +#define CONFIG_SYS_HZ 1000 + +/* Misc CPU related */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_OF_LIBFDT + +/* general purpose I/O */ +#define CONFIG_AT91_GPIO + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS +#define CONFIG_BAUDRATE 115200 + +/* LCD */ +#define CONFIG_LCD +#define LCD_BPP LCD_COLOR16 +#define LCD_OUTPUT_BPP 24 +#define CONFIG_LCD_LOGO +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_HLCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* NOR flash - no real flash on this board */ +#define CONFIG_SYS_NO_FLASH + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA + +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NAND +#define CONFIG_CMD_SF +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT + +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 + +/* + * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, + * leaving the correct space for initial global data structure above + * that address while providing maximum stack area below. + */ +# define CONFIG_SYS_INIT_SP_ADDR \ + (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE) + +/* DataFlash */ +#ifdef CONFIG_CMD_SF +#define CONFIG_ATMEL_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_ENV_SPI_MODE SPI_MODE_3 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 +#endif + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 4 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 5 + +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC +#define CONFIG_ATMEL_NAND_HW_PMECC +#define CONFIG_PMECC_CAP 2 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 +#endif + +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_CMD_MTDPARTS +#define MTDIDS_DEFAULT "nand0=atmel_nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs)" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=console=ttyS0,115200\0" \ + "mtdparts="MTDPARTS_DEFAULT"\0" \ + "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\ + "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0" + +/* MMC */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +/* FAT */ +#ifdef CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x26e00000 + +#ifdef CONFIG_SYS_USE_SPIFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x5000 +#define CONFIG_ENV_SIZE 0x3000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ + "sf probe 0; sf read 0x22000000 0x100000 0x300000; " \ + "bootm 0x22000000" + +#elif defined(CONFIG_SYS_USE_NANDFLASH) + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ + "nand read 0x21000000 0x180000 0x080000;" \ + "nand read 0x22000000 0x200000 0x400000;" \ + "bootm 0x22000000 - 0x21000000" + +#else /* CONFIG_SYS_USE_MMC */ + +/* bootstrap + u-boot + env + linux in mmc */ +#define CONFIG_ENV_IS_IN_MMC +/* For FAT system, most cases it should be in the reserved sector */ +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \ + "fatload mmc 0:1 0x21000000 dtb;" \ + "fatload mmc 0:1 0x22000000 uImage;" \ + "bootm 0x22000000 - 0x21000000" + +#endif + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \ + + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ + +#endif diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 7b51b53..db1b613 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -149,10 +149,15 @@ #define CONFIG_MUSB_TIMEOUT 100000 #endif +/* Don't waste time transferring a logo over the UART */ +#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) +/*# define CONFIG_VIDEO*/ +#endif /* * Video Settings */ +#ifdef CONFIG_VIDEO #ifdef CONFIG_BF527_EZKIT_REV_2_1 # define CONFIG_LQ035Q1_SPI_BUS 0 # define CONFIG_LQ035Q1_SPI_CS 7 @@ -166,7 +171,7 @@ #else # define EASYLOGO_HEADER <asm/bfin_logo_230x230_lzma.h> #endif - +#endif /* CONFIG_VIDEO */ /* * Misc Settings @@ -175,11 +180,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 -/* Don't waste time transferring a logo over the UART */ -#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) -# define CONFIG_VIDEO -#endif - /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 05029d4..25cebf8 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -52,7 +52,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (384 * 1024) @@ -135,15 +135,17 @@ /* * SPI_MMC Settings */ +#define CONFIG_MMC_SPI +#ifdef CONFIG_MMC_SPI #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_MMC_SPI - +#endif /* * NAND Settings */ /* #define CONFIG_NAND_PLAT */ +#ifdef CONFIG_NAND_PLAT #define CONFIG_SYS_NAND_BASE 0x20212000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -158,7 +160,7 @@ #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) #define NAND_PLAT_GPIO_DEV_READY GPIO_PF3 - +#endif /* CONFIG_NAND_PLAT */ /* * CF-CARD IDE-HDD Support diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index e6b05db..da5f029 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -120,18 +120,16 @@ #define CONFIG_ENV_SECT_SIZE 0x8000 #endif - /* * NAND Settings */ -#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) -# define CONFIG_BFIN_NFC_BOOTROM_ECC -#endif +#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 +#define CONFIG_BFIN_NFC_BOOTROM_ECC #define CONFIG_DRIVER_NAND_BFIN -#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - +#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* * I2C Settings @@ -184,13 +182,12 @@ #define CONFIG_UART_CONSOLE 1 #define CONFIG_BFIN_SPI_IMG_SIZE 0x50000 -#ifndef __ADSPBF542__ -/* Don't waste time transferring a logo over the UART */ -# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) -# define CONFIG_VIDEO -# define EASYLOGO_HEADER <asm/bfin_logo_230x230_gzip.h> -# endif -# define CONFIG_DEB_DMA_URGENT +#define CONFIG_ADI_GPIO2 + +#undef CONFIG_VIDEO +#ifdef CONFIG_VIDEO +#define EASYLOGO_HEADER < asm/bfin_logo_230x230_gzip.h > +#define CONFIG_DEB_DMA_URGENT #endif /* Define if want to do post memory test */ diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 1a9d27e..6ee1e4c 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -98,6 +98,11 @@ */ #define CONFIG_UART_CONSOLE 0 +/* + * Run core 1 from L1 SRAM start address when init uboot on core 0 + */ +/* #define CONFIG_CORE1_RUN 1 */ + /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 02149fa..1a43e1b 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -144,10 +144,13 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_CMD_MEMORY +#define CONFIG_CMD_SOFTSWITCH #define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) #define CONFIG_BFIN_SOFT_SWITCH +#define CONFIG_ADI_GPIO2 + #if 0 #define CONFIG_UART_MEM 1024 #undef CONFIG_UART_CONSOLE @@ -155,6 +158,13 @@ #undef CONFIG_UART_CONSOLE_IS_JTAG #endif +#define CONFIG_BOARD_SIZE_LIMIT $$((512 * 1024)) + +/* + * Run core 1 from L1 SRAM start address when init uboot on core 0 + */ +/* #define CONFIG_CORE1_RUN 1 */ + /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index d3ae3a7..e1a6fe3 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -111,8 +111,8 @@ #ifndef CONFIG_BAUDRATE # define CONFIG_BAUDRATE 57600 #endif -#ifndef CONFIG_DEBUG_EARLY_SERIAL -# define CONFIG_SYS_BFIN_UART +#ifdef CONFIG_UART_CONSOLE +# define CONFIG_BFIN_SERIAL #endif /* @@ -317,5 +317,13 @@ #define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */ #define CONFIG_LZMA #define CONFIG_MONITOR_IS_IN_RAM - +#ifdef CONFIG_HW_WATCHDOG +# define CONFIG_BFIN_WATCHDOG +# ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS +# define CONFIG_WATCHDOG_TIMEOUT_MSECS 5000 +# endif +#endif +#ifndef CONFIG_ADI_GPIO2 +# define CONFIG_ADI_GPIO1 +#endif #endif diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 726714d..c6e357a 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -135,12 +135,12 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS #define MTDIDS_DEFAULT "nand0=nand" #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ - "1920k(u-boot),128k(u-boot-env),"\ + "1920k(u-boot),256k(u-boot-env),"\ "4m(kernel),-(fs)" #define CONFIG_CMD_I2C /* I2C serial bus support */ @@ -182,14 +182,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ - /* Environment information */ #define CONFIG_BOOTDELAY 10 #define CONFIG_ZERO_BOOTDELAY_CHECK @@ -204,9 +196,9 @@ "defaultdisplay=dvi\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ + "mmcrootfstype=ext4 rootwait\0" \ "nandroot=/dev/mtdblock4 rw\0" \ - "nandrootfstype=jffs2\0" \ + "nandrootfstype=ubifs\0" \ "mmcargs=setenv bootargs console=${console} " \ "mpurate=${mpurate} " \ "vram=${vram} " \ @@ -232,7 +224,7 @@ "bootm ${loadaddr}\0" \ "nandboot=echo Booting from nand ...; " \ "run nandargs; " \ - "nand read ${loadaddr} 280000 400000; " \ + "nand read ${loadaddr} 2a0000 400000; " \ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 5bacc77..2fefdc8 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -38,7 +38,6 @@ #define CONFIG_SHOW_BOOT_PROGRESS #define CONFIG_LAST_STAGE_INIT #define CONFIG_SYS_VSNPRINTF -#define CONFIG_INTEL_CORE_ARCH /* Sandy bridge and ivy bridge chipsets. */ #define CONFIG_ZBOOT_32 #define CONFIG_PHYSMEM #define CONFIG_SYS_EARLY_PCI_INIT @@ -49,6 +48,19 @@ #define CONFIG_OF_SEPARATE #define CONFIG_DEFAULT_DEVICE_TREE link +#define CONFIG_BOOTSTAGE +#define CONFIG_BOOTSTAGE_REPORT +#define CONFIG_BOOTSTAGE_FDT +#define CONFIG_CMD_BOOTSTAGE +/* Place to stash bootstage data from first-stage U-Boot */ +#define CONFIG_BOOTSTAGE_STASH 0x0110f000 +#define CONFIG_BOOTSTAGE_STASH_SIZE 0x7fc +#define CONFIG_BOOTSTAGE_USER_COUNT 60 + +#define CONFIG_LZO +#undef CONFIG_ZLIB +#undef CONFIG_GZIP + /*----------------------------------------------------------------------- * Watchdog Configuration */ @@ -78,7 +90,8 @@ #endif /* Generic TPM interfaced through LPC bus */ -#define CONFIG_GENERIC_LPC_TPM +#define CONFIG_TPM +#define CONFIG_TPM_TIS_LPC #define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000 /*----------------------------------------------------------------------- @@ -218,7 +231,6 @@ #define CONFIG_SYS_MEMTEST_END 0x01000000 #define CONFIG_SYS_LOAD_ADDR 0x100000 #define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_X86_ISR_TIMER /*----------------------------------------------------------------------- * SDRAM Configuration @@ -235,8 +247,9 @@ * CPU Features */ -#define CONFIG_SYS_GENERIC_TIMER +#define CONFIG_SYS_X86_TSC_TIMER #define CONFIG_SYS_PCAT_INTERRUPTS +#define CONFIG_SYS_PCAT_TIMER #define CONFIG_SYS_NUM_IRQS 16 /*----------------------------------------------------------------------- diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 5cc9b5a..2e2d439 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -38,6 +38,8 @@ #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg #elif defined(CONFIG_P5020DS) #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg +#elif defined(CONFIG_P5040DS) +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg #endif #endif diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index f7ac256..198892b 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -109,8 +109,8 @@ #define CONFIG_SYS_NAND_CS 3 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE #define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_CLE_MASK 0x10 -#define CONFIG_SYS_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_MASK_CLE 0x10 +#define CONFIG_SYS_NAND_MASK_ALE 0x8 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #endif diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 583568d..c420967 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -199,8 +199,8 @@ #define CONFIG_SYS_NAND_PAGE_2K #define CONFIG_SYS_NAND_CS 3 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_SYS_CLE_MASK 0x10 -#define CONFIG_SYS_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_MASK_CLE 0x10 +#define CONFIG_SYS_NAND_MASK_ALE 0x8 #undef CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 2d63b67..97bc972 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -118,8 +118,8 @@ #define CONFIG_SYS_NAND_PAGE_2K #define CONFIG_SYS_NAND_CS 3 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_SYS_CLE_MASK 0x10 -#define CONFIG_SYS_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_MASK_CLE 0x10 +#define CONFIG_SYS_NAND_MASK_ALE 0x8 #undef CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 8a82892..41d6cf9 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -142,9 +142,9 @@ /* TPM */ #define CONFIG_TPM #define CONFIG_CMD_TPM -#define CONFIG_INFINEON_TPM_I2C -#define CONFIG_INFINEON_TPM_I2C_BUS 3 -#define CONFIG_INFINEON_TPM_I2C_ADDR 0x20 +#define CONFIG_TPM_TIS_I2C +#define CONFIG_TPM_TIS_I2C_BUS_NUMBER 3 +#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20 /* MMC SPL */ #define CONFIG_SPL diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h new file mode 100644 index 0000000..e776514 --- /dev/null +++ b/include/configs/goflexhome.h @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> + * + * Based on dockstar.h originally written by + * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> + * + * Based on sheevaplug.h originally written by + * Prafulla Wadaskar <prafulla@marvell.com> + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_GOFLEXHOME_H +#define _CONFIG_GOFLEXHOME_H + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ +#define CONFIG_KW88F6281 1 /* SOC Name */ +#define CONFIG_MACH_GOFLEXHOME /* Machine type */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* + * Default GPIO configuration and LED status + */ +#define GOFLEXHOME_OE_LOW (~(0)) +#define GOFLEXHOME_OE_HIGH (~(0)) +#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ +#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ + +/* PHY related */ +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#include <config_cmd_default.h> +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EXT4 +#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ +#define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */ + +/* + * Environment variables configurations + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ +#else +#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ +#endif +/* + * max 4k env size is enough, but in case of nand + * it has to be rounded to sector size + */ +#define CONFIG_ENV_SIZE 0x20000 /* 128k */ +#define CONFIG_ENV_ADDR 0xC0000 +#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */ + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ + "ubi part root; " \ + "ubifsmount ubi:root; " \ + "ubifsload 0x800000 ${kernel}; " \ + "bootm 0x800000" + +#define CONFIG_MTDPARTS \ + "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=console=ttyS0,115200\0" \ + "mtdids=nand0=orion_nand\0" \ + "mtdparts="CONFIG_MTDPARTS \ + "kernel=/boot/uImage\0" \ + "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0 +#endif /* CONFIG_CMD_NET */ + +/* + * * SATA Driver configuration + * */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#endif /*CONFIG_MVSATA_IDE*/ + +/* + * * RTC driver configuration + * */ +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_MV +#endif /* CONFIG_CMD_DATE */ + +#endif /* _CONFIG_GOFLEXHOME_H */ diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h new file mode 100644 index 0000000..12f28f8 --- /dev/null +++ b/include/configs/igep0033.h @@ -0,0 +1,293 @@ +/* + * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CONFIG_IGEP0033_H +#define __CONFIG_IGEP0033_H + +#define CONFIG_AM33XX +#define CONFIG_OMAP + +#include <asm/arch/omap.h> + +/* Mach type */ +#define MACH_TYPE_IGEP0033 4521 /* Until the next sync */ +#define CONFIG_MACH_TYPE MACH_TYPE_IGEP0033 + +/* Clock defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +/* DMA defines */ +#define CONFIG_DMA_COHERENT +#define CONFIG_DMA_COHERENT_SIZE (1 << 20) + +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_SYS_MALLOC_LEN (1024 << 10) +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT "U-Boot# " +#define CONFIG_SYS_NO_FLASH + +/* Display cpuinfo */ +#define CONFIG_DISPLAY_CPUINFO + +/* Commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_MMC +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS + +/* + * Because the issues explained in doc/README.memory-test, the "mtest command + * is considered deprecated. It should not be enabled in most normal ports of + * U-Boot. + */ +#undef CONFIG_CMD_MEMTEST + +#define CONFIG_BOOTDELAY 1 /* negative for no autoboot */ +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x80200000\0" \ + "rdaddr=0x81000000\0" \ + "bootfile=/boot/uImage\0" \ + "console=ttyO0,115200n8\0" \ + "optargs=\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext4 rootwait\0" \ + "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ + "ramrootfstype=ext2\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "ramargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${ramroot} " \ + "rootfstype=${ramrootfstype}\0" \ + "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ + "loaduimagefat=load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ + "loaduimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "ramboot=echo Booting from ramdisk ...; " \ + "run ramargs; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loaduimage; then " \ + "run mmcboot;" \ + "fi;" \ + "fi;" \ + +/* Max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ + GENERATED_GBL_DATA_SIZE) +/* Platform/Board specific defs */ +#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (48000000) +#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ + +#define CONFIG_SERIAL_MULTI +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_SYS_CONSOLE_INFO_QUIET + +/* MMC support */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* GPIO support */ +#define CONFIG_OMAP_GPIO + +/* Ethernet support */ +#define CONFIG_DRIVER_TI_CPSW +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#define CONFIG_PHYLIB +#define CONFIG_PHY_ADDR 0 +#define CONFIG_PHY_SMSC + +/* NAND support */ +#define CONFIG_NAND +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_SYS_NAND_BASE (0x08000000) /* phys address CS0 */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_ONFI_DETECTION 1 +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO + +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(SPL),"\ + "1m(U-Boot),128k(U-Boot Env),"\ + "5m(Kernel),-(File System)" + +/* Unsupported features */ +#undef CONFIG_USE_IRQ + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +/* + * Place the image at the start of the ROM defined image space. + * We limit our size to the ROM-defined downloaded image area, and use the + * rest of the space for stack. + */ +#define CONFIG_SPL_TEXT_BASE 0x402F0400 +#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR + +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_NAND_AM33XX_BCH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, \ + 18, 19, 20, 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, 31, 32, 33, \ + 34, 35, 36, 37, 38, 39, 40, 41, \ + 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, } + +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 14 + +#define CONFIG_SYS_NAND_ECCSTEPS 4 +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) + +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80800000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + +/* + * Since SPL did pll and ddr initialization for us, + * we don't need to do it twice. + */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#endif /* ! __CONFIG_IGEP0033_H */ diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h index c663700..327a866 100644 --- a/include/configs/ima3-mx53.h +++ b/include/configs/ima3-mx53.h @@ -26,7 +26,6 @@ /* SOC type must be included before imx-regs.h */ #define CONFIG_MX53 #include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -79,8 +78,6 @@ /* SPI FLASH - not used for environment */ #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_CS (IOMUX_TO_GPIO(MX53_PIN_CSI0_D11) \ - << 8) | 0 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 25000000 diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 4ce4058..5b3fa43 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -77,6 +77,7 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_CMD_USB +#define CONFIG_VIDEO #define CONFIG_REGEX /* Enable regular expression support */ @@ -271,6 +272,24 @@ #endif /* + * LCD + */ +#ifdef CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_MXS +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SPLASH_SCREEN +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) +#endif + +/* * Boot Linux */ #define CONFIG_CMDLINE_TAG diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h new file mode 100644 index 0000000..8403d51 --- /dev/null +++ b/include/configs/m53evk.h @@ -0,0 +1,256 @@ +/* + * DENX M53 configuration + * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __M53EVK_CONFIG_H__ +#define __M53EVK_CONFIG_H__ + +#define CONFIG_MX53 +#define CONFIG_MXC_GPIO +#define CONFIG_SYS_HZ 1000 + +#include <asm/arch/imx-regs.h> + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_REVISION_TAG +#define CONFIG_SYS_NO_FLASH + +/* + * U-Boot Commands + */ +#include <config_cmd_default.h> +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_SATA +#define CONFIG_CMD_USB + +/* + * Memory configurations + */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) +#define PHYS_SDRAM_2 CSD1_BASE_ADDR +#define PHYS_SDRAM_2_SIZE (512 * 1024 * 1024) +#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE) +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) +#define CONFIG_SYS_MEMTEST_START 0x70000000 +#define CONFIG_SYS_MEMTEST_END 0xaff00000 + +#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_TEXT_BASE 0x71000000 + +/* + * U-Boot general configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print buffer size */ +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* Boot argument buffer size */ +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ +#define CONFIG_AUTO_COMPLETE /* Command auto complete */ +#define CONFIG_CMDLINE_EDITING /* Command history etc */ +#define CONFIG_SYS_HUSH_PARSER + +/* + * Serial Driver + */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART2_BASE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* + * MMC Driver + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 1 +#endif + +/* + * NAND + */ +#define CONFIG_ENV_SIZE (16 * 1024) +#ifdef CONFIG_CMD_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI +#define CONFIG_NAND_MXC +#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI +#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR +#define CONFIG_SYS_NAND_LARGEPAGE +#define CONFIG_MXC_NAND_HWECC +#define CONFIG_SYS_NAND_USE_FLASH_BBT + +/* Environment is in NAND */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_RANGE (512 * 1024) +#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) + +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=mxc-nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=mxc-nand:" \ + "1m(bootloader)ro," \ + "512k(environment)," \ + "512k(redundant-environment)," \ + "4m(kernel)," \ + "128k(fdt)," \ + "8m(ramdisk)," \ + "-(filesystem)" +#else +#define CONFIG_ENV_IS_NOWHERE +#endif + +/* + * Ethernet on SOC (FEC) + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE FEC_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x0 +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#endif + +/* + * I2C + */ +#ifdef CONFIG_CMD_I2C +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +/* + * RTC + */ +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_M41T62 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 2000 +#endif + +/* + * USB + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX5 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#endif + +/* + * SATA + */ +#ifdef CONFIG_CMD_SATA +#define CONFIG_DWC_AHSATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_LIBATA +#endif + +/* + * Boot Linux + */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "m53evk/uImage" +#define CONFIG_BOOTARGS "console=ttymxc1,115200" +#define CONFIG_LOADADDR 0x70800000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_OF_LIBFDT + +/* + * NAND SPL + */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx" +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_TEXT_BASE 0x70008000 +#define CONFIG_SPL_PAD_TO 0x8000 +#define CONFIG_SPL_STACK 0x70004000 +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 + +#endif /* __M53EVK_CONFIG_H__ */ diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index af30257..c4f245b 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -275,7 +275,7 @@ /* * IIM - IC Identification Module */ -#undef CONFIG_IIM +#undef CONFIG_FSL_IIM /* * EEPROM configuration diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 0c4e719..17f53ba 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -104,7 +104,7 @@ /* gpio */ #ifdef XILINX_GPIO_BASEADDR -# define CONFIG_SYS_GPIO_0 1 +# define CONFIG_XILINX_GPIO # define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR #endif @@ -312,6 +312,7 @@ #define CONFIG_CMD_IRQ #define CONFIG_CMD_MFSL #define CONFIG_CMD_ECHO +#define CONFIG_CMD_GPIO #if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE) # define CONFIG_CMD_CACHE diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 6e6af62..64ce52d 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -370,7 +370,7 @@ /* * IIM - IC Identification Module */ -#undef CONFIG_IIM +#undef CONFIG_FSL_IIM /* * EEPROM configuration diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 3747955..54d01f9 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -63,6 +63,7 @@ #define CONFIG_CMD_USB #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS /* Memory configurations */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index cb3d938..13d1839 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -53,6 +53,9 @@ /* * Hardware drivers */ +#define CONFIG_FSL_IIM +#define CONFIG_CMD_FUSE + #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_MXC_GPIO @@ -149,32 +152,66 @@ #define CONFIG_ETHPRIME "FEC0" -#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ +#define CONFIG_LOADADDR 0x92000000 /* loadaddr env var */ #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "uimage=uImage\0" \ + "fdt_file=imx51-babbage.dtb\0" \ + "fdt_addr=0x91000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ "mmcdev=0\0" \ "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ + "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ + "root=${mmcroot}\0" \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ - "bootm\0" \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" \ "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ "root=/dev/nfs " \ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ "netboot=echo Booting from net ...; " \ "run netargs; " \ - "dhcp ${uimage}; bootm\0" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo ERROR: Cannot load the DT; " \ + "exit; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index 148f7a2..41974b1 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -34,6 +34,7 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) @@ -90,6 +91,7 @@ #include <config_cmd_default.h> #undef CONFIG_CMD_IMLS +#define CONFIG_CMD_SETEXPR #define CONFIG_BOOTDELAY 3 @@ -100,45 +102,98 @@ #define CONFIG_SMC911X_16_BIT #define CONFIG_SMC911X_BASE CS1_BASE_ADDR -#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ +#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */ #define CONFIG_SYS_TEXT_BASE 0x77800000 +#define CONFIG_DEFAULT_FDT_FILE "imx53-ard.dtb" + #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "uimage=uImage\0" \ - "mmcdev=0\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ + "console=ttymxc0\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "fdt_addr=0x71000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_ENV_PART) "\0" \ + "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "update_sd_firmware_filename=u-boot.imx\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if mmc dev ${mmcdev}; then " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "fi; " \ + "fi\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ - "bootm\0" \ - "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ "run netargs; " \ - "dhcp ${uimage}; bootm\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ + "setenv get_cmd tftp; " \ "fi; " \ - "else run netboot; fi" + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ @@ -185,6 +240,7 @@ #define CONFIG_ENV_SIZE (8 * 1024) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 #define CONFIG_OF_LIBFDT diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index a0af3ee..822b926 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -34,6 +34,7 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG #define CONFIG_OF_LIBFDT diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index 9e83319..942949d 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -34,6 +34,7 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index b333937..674bcd3 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -17,6 +17,7 @@ #ifndef __MX6_COMMON_H #define __MX6_COMMON_H +#define CONFIG_ARM_ERRATA_742230 #define CONFIG_ARM_ERRATA_743622 #define CONFIG_ARM_ERRATA_751472 diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h index f5f115f..7298a76 100644 --- a/include/configs/mx6qsabre_common.h +++ b/include/configs/mx6qsabre_common.h @@ -78,6 +78,7 @@ #define CONFIG_CMD_BMODE #define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_SETEXPR #undef CONFIG_CMD_IMLS #define CONFIG_BOOTDELAY 1 @@ -98,6 +99,19 @@ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ "mmcpart=" __stringify(CONFIG_SYS_MMC_ENV_PART) "\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if mmc dev ${mmcdev}; then " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "fi; " \ + "fi\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 6d4b837..b814418 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -47,6 +47,11 @@ #define CONFIG_MISC_INIT_R #define CONFIG_MXC_GPIO +#define CONFIG_CMD_FUSE +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART2_BASE diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h new file mode 100644 index 0000000..8a94efd --- /dev/null +++ b/include/configs/mx6slevk.h @@ -0,0 +1,189 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX6SL EVK board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> +#include <asm/sizes.h> + +#define CONFIG_MX6 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define MACH_TYPE_MX6SLEVK 4307 +#define CONFIG_MACH_TYPE MACH_TYPE_MX6SLEVK + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x80800000 +#define CONFIG_SYS_TEXT_BASE 0x87800000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "console=ttymxc0\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=imx6sl-evk.dtb\0" \ + "fdt_addr=0x81000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "mmcdev=0\0" \ + "mmcpart=2\0" \ + "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_STACKSIZE SZ_128K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE SZ_1G + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_OFFSET (6 * SZ_64K) +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 93e7fe4..aea91bc 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -44,6 +44,11 @@ #define CONFIG_MISC_INIT_R #define CONFIG_MXC_GPIO +#define CONFIG_CMD_FUSE +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART2_BASE diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 376a3d0..f9adc01 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -273,7 +273,7 @@ #endif /* (CONFIG_CMD_NET) */ #define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2 +#define CONFIG_FPGA #define CONFIG_FPGA_ALTERA #define CONFIG_FPGA_CYCLON2 #define CONFIG_SYS_FPGA_PROG_FEEDBACK diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index 1fd3097..d6448b0 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -87,6 +87,10 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} + +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + /* I2C */ #define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 100000 @@ -176,7 +180,9 @@ "if test $board_name = sdp4430; then " \ "setenv fdtfile omap4-sdp.dtb; fi; " \ "if test $board_name = panda; then " \ - "setenv fdtfile omap4-panda-es.dtb; fi\0" \ + "setenv fdtfile omap4-panda.dtb; fi;" \ + "if test $board_name = panda-es; then " \ + "setenv fdtfile omap4-panda-es.dtb; fi; \0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index eacb5f5..abf586b 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -66,4 +66,6 @@ #define CONFIG_SYS_PROMPT "Panda # " +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + #endif /* __CONFIG_PANDA_H */ diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h index c21c387..deb5e9f 100644 --- a/include/configs/omap5_common.h +++ b/include/configs/omap5_common.h @@ -86,6 +86,9 @@ #define CONFIG_BAUDRATE 115200 +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + /* I2C */ #define CONFIG_HARD_I2C #define CONFIG_SYS_I2C_SPEED 100000 @@ -150,10 +153,12 @@ "usbtty=cdc_acm\0" \ "vram=16M\0" \ "partitions=" PARTS_DEFAULT "\0" \ + "optargs=\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ "mmcrootfstype=ext4 rootwait\0" \ "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ "vram=${vram} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 550cabd..9e0339b 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -37,7 +37,7 @@ /* TWL6035 */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_TWL6035_POWER +#define CONFIG_PALMAS_POWER #endif /* MMC ENV related defines */ @@ -56,4 +56,5 @@ #define CONFIG_SYS_PROMPT "OMAP5430 EVM # " +#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296 #endif /* __CONFIG_OMAP5_EVM_H */ diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index d0ea74e..2ecd105 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -20,6 +20,7 @@ #define __CONFIG_PCM051_H #define CONFIG_AM33XX +#define CONFIG_OMAP #include <asm/arch/omap.h> @@ -129,7 +130,6 @@ + (8 * 1024 * 1024)) #define CONFIG_SYS_LOAD_ADDR 0x80007fc0 /* Default load address */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC @@ -158,13 +158,12 @@ /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ #define CONFIG_CONS_INDEX 1 /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SERIAL_MULTI #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ @@ -194,6 +193,9 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -202,8 +204,13 @@ /* Defines for SPL */ #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK +/* + * Place the image at the start of the ROM defined image space. + * We limit our size to the ROM-defined downloaded image area, and use the + * rest of the space for stack. + */ #define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (101 * 1024) +#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SPL_BSS_START_ADDR 0x80000000 diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 306abcc..db95cb0 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -341,6 +341,11 @@ #define CONFIG_SYS_I2C_SLAVE 0x7F /* + * IIM - IC Identification Module + */ +#undef CONFIG_FSL_IIM + +/* * EEPROM configuration */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM addr */ @@ -402,6 +407,8 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO +#undef CONFIG_CMD_FUSE + #ifdef CONFIG_VIDEO #define CONFIG_CMD_BMP #endif diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index b60a9ad..6f6ddfa 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -355,7 +355,7 @@ #define CONFIG_BOOTCOMMAND "run flashboot" #define CONFIG_ROOTPATH "/ronetix/rootfs" -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay #define CONFIG_CON_ROT "fbcon=rotate:3 " #define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 "\ diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h new file mode 100644 index 0000000..c13e983 --- /dev/null +++ b/include/configs/sama5d3xek.h @@ -0,0 +1,245 @@ +/* + * Configuation settings for the SAMA5D3xEK board. + * + * Copyright (C) 2012 - 2013 Atmel + * + * based on at91sam9m10g45ek.h by: + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x26f00000 + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_AT91FAMILY +#define CONFIG_ARCH_CPU_INIT + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT /* Device Tree support */ + +/* general purpose I/O */ +#define CONFIG_AT91_GPIO + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_DBGU + +/* + * This needs to be defined for the OHCI code to work but it is defined as + * ATMEL_ID_UHPHS in the CPU specific header files. + */ +#define ATMEL_ID_UHP ATMEL_ID_UHPHS + +/* + * Specify the clock enable bit in the PMC_SCER register. + */ +#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP + +/* LCD */ +#define CONFIG_LCD +#define LCD_BPP LCD_COLOR16 +#define LCD_OUTPUT_BPP 24 +#define CONFIG_LCD_LOGO +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_HLCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* board specific (not enough SRAM) */ +#define CONFIG_SAMA5D3_LCD_BASE 0x23E00000 + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* No NOR flash */ +#define CONFIG_SYS_NO_FLASH + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_LOADS +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_SIZE 0x20000000 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + +/* SerialFlash */ +#define CONFIG_CMD_SF + +#ifdef CONFIG_CMD_SF +#define CONFIG_ATMEL_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#endif + +/* NAND flash */ +#define CONFIG_CMD_NAND + +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_MAX_CHIPS 1 +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ONFI_DETECTION +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC +#define CONFIG_ATMEL_NAND_HW_PMECC +#define CONFIG_PMECC_CAP 4 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_PMECC_INDEX_TABLE_OFFSET ATMEL_PMECC_INDEX_OFFSET_512 +#define CONFIG_CMD_NAND_TRIMFFS +#endif + +/* Ethernet Hardware */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_MULTI +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY + +/* MMC */ +#define CONFIG_CMD_MMC + +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define ATMEL_BASE_MMCI ATMEL_BASE_MCI0 +#endif + +/* USB */ +#define CONFIG_CMD_USB + +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "sama5d3" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 +#define CONFIG_DOS_PARTITION +#define CONFIG_USB_STORAGE +#endif + +#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) +#define CONFIG_CMD_FAT +#endif + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#ifdef CONFIG_SYS_USE_SERIALFLASH +/* bootstrap + u-boot + env + linux in serial flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x5000 +#define CONFIG_ENV_SIZE 0x3000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ + "sf read 0x22000000 0x42000 0x300000; " \ + "bootm 0x22000000" +#elif CONFIG_SYS_USE_NANDFLASH +/* bootstrap + u-boot + env in nandflash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ + "nand read 0x22000000 0x200000 0x600000;" \ + "bootm 0x22000000 - 0x21000000" +#elif CONFIG_SYS_USE_MMC +/* bootstrap + u-boot + env in sd card */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ + "fatload mmc 0:1 0x22000000 uImage; " \ + "bootm 0x22000000 - 0x21000000" +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else +#define CONIG_ENV_IS_NOWHERE +#endif + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "root=/dev/mmcblk0p2 rw rootwait" +#else +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256K(env),256k(evn_redundent),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) + +#endif diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h deleted file mode 100644 index f67898e..0000000 --- a/include/configs/sorcery.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_SORCERY 1 /* Sorcery board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 60000000 /* ... running at 60MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 8 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC */ - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* PCI */ -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 - -#define CONFIG_PCI_MEM_BUS 0x80000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x71000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_PCI_CFG_BUS 0x70000000 -#define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS -#define CONFIG_PCI_CFG_SIZE 0x01000000 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -/* - * Default Environment - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_HOSTNAME sorcery - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask" \ - ":$hostname:$netdev:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm $kernel_addr\0" \ - "flash_self=run ramargs addip;" \ - "bootm $kernel_addr $ramdisk_addr\0" \ - "net_nfs=tftp 200000 $bootfile;run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "bootfile=/tftpboot/sorcery/uImage\0" \ - "kernel_addr=FFE00000\0" \ - "ramdisk_addr=FFB00000\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_EEPRO100 - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Flexbus Chipselect configuration - * Beware: Some CS# seem to be mandatory (if these CS# are not set, - * board can hang-up in unpredictable place). - * Sorcery_Memory_Map v0.3 is possibly wrong with CPLD CS# - */ - -/* Flash */ -#define CONFIG_SYS_CS0_BASE 0xf800 -#define CONFIG_SYS_CS0_MASK 0x08000000 /* 128 MB (two chips) */ -#define CONFIG_SYS_CS0_CTRL 0x001019c0 - -/* NVM */ -#define CONFIG_SYS_CS1_BASE 0xf7e8 -#define CONFIG_SYS_CS1_MASK 0x00040000 /* 256K */ -#define CONFIG_SYS_CS1_CTRL 0x00101940 /* 8bit port size */ - -/* Atlas2 + Gemini */ -#define CONFIG_SYS_CS2_BASE 0xf7e7 -#define CONFIG_SYS_CS2_MASK 0x00010000 /* 64K*/ -#define CONFIG_SYS_CS2_CTRL 0x001011c0 /* 16bit port size */ - -/* CAN Controller */ -#define CONFIG_SYS_CS3_BASE 0xf7e6 -#define CONFIG_SYS_CS3_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS3_CTRL 0x00102140 /* 8Bit port size */ - -/* Foreign interface */ -#define CONFIG_SYS_CS4_BASE 0xf7e5 -#define CONFIG_SYS_CS4_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS4_CTRL 0x00101dc0 /* 16bit port size */ - -/* CPLD */ -#define CONFIG_SYS_CS5_BASE 0xf7e4 -#define CONFIG_SYS_CS5_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS5_CTRL 0x001000c0 /* 16bit port size */ - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_FLASH0_BASE) - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ - CONFIG_SYS_FLASH_BASE+0x04000000 } /* two banks */ - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000000 - 0x40000) -#define CONFIG_ENV_SIZE 0x4000 /* 16K */ -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + 0x20000) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration (for SPD) */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 1 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x50 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x100 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 5 /* (CL=2.5)x2 */ - -/* SDRAM drive strength register (for SSTL_2 class II)*/ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x1F -#define CONFIG_MII 1 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 - -/* -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 2c665b8..fa1dcc3 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -29,13 +29,14 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg #endif #define CONFIG_CMD_REGINFO /* High Level Configuration Options */ #define CONFIG_BOOKE -#define CONFIG_E6500 #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ @@ -444,11 +445,19 @@ unsigned long get_board_ddr_clk(void); #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ -/* VSC Crossbar switches */ -#define CONFIG_VSC_CROSSBAR #define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VOL_MONITOR 0xa #define I2C_MUX_CH_VSC3316_FS 0xc #define I2C_MUX_CH_VSC3316_BS 0xd + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* VSC Crossbar switches */ +#define CONFIG_VSC_CROSSBAR #define VSC3316_FSM_TX_ADDR 0x70 #define VSC3316_FSM_RX_ADDR 0x71 @@ -504,7 +513,7 @@ unsigned long get_board_ddr_clk(void); */ #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_SST #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -641,15 +650,10 @@ unsigned long get_board_ddr_clk(void); #define SGMII_CARD_PORT2_PHY_ADDR 0x1D #define SGMII_CARD_PORT3_PHY_ADDR 0x1E #define SGMII_CARD_PORT4_PHY_ADDR 0x1F -#define XFI_CARD_PORT1_PHY_ADDR 0x1 /* tmp, FIXME below addr */ -#define XFI_CARD_PORT2_PHY_ADDR 0x2 -#define XFI_CARD_PORT3_PHY_ADDR 0x3 -#define XFI_CARD_PORT4_PHY_ADDR 0x4 -#define QSGMII_CARD_PHY_ADDR 0x5 -#define FM1_10GEC1_PHY_ADDR 0x6 -#define FM1_10GEC2_PHY_ADDR 0x7 -#define FM2_10GEC1_PHY_ADDR 0x8 -#define FM2_10GEC2_PHY_ADDR 0x9 +#define FM1_10GEC1_PHY_ADDR 0x0 +#define FM1_10GEC2_PHY_ADDR 0x1 +#define FM2_10GEC1_PHY_ADDR 0x2 +#define FM2_10GEC2_PHY_ADDR 0x3 #endif #ifdef CONFIG_PCI @@ -783,8 +787,21 @@ unsigned long get_board_ddr_clk(void); #define __USB_PHY_TYPE utmi +/* + * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to + * cacheline interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB," \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ "bank_intlv=auto;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index bf18699..6ed2fde 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -157,6 +157,8 @@ /* overrides for SPL build here */ #ifdef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT + /* remove devicetree support */ #ifdef CONFIG_OF_CONTROL #undef CONFIG_OF_CONTROL diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index c2986d8..721b29c 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -74,8 +74,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80090000 #define CONFIG_SPL_STACK 0x800ffffc -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra114/u-boot-spl.lds" - /* Total I2C ports on Tegra114 */ #define TEGRA_I2C_NUM_CONTROLLERS 5 diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 395a657..d5abecb 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -88,8 +88,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x00090000 #define CONFIG_SPL_STACK 0x000ffffc -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds" - /* Align LCD to 1MB boundary */ #define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index f6c07c6..ed36e11 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -87,8 +87,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80090000 #define CONFIG_SPL_STACK 0x800ffffc -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra30/u-boot-spl.lds" - /* Total I2C ports on Tegra30 */ #define TEGRA_I2C_NUM_CONTROLLERS 5 diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 16547e3..eac5ad0 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -19,6 +19,7 @@ #define CONFIG_TI81XX #define CONFIG_TI814X #define CONFIG_SYS_NO_FLASH +#define CONFIG_OMAP #include <asm/arch/omap.h> @@ -162,6 +163,9 @@ #define CONFIG_BAUDRATE 115200 +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -218,4 +222,25 @@ /* Unsupported features */ #undef CONFIG_USE_IRQ +/* Ethernet */ +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_DRIVER_TI_CPSW +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_ADDR 1 +#define CONFIG_PHY_ET1011C +#define CONFIG_PHY_ET1011C_TX_CLK_FIX + #endif /* ! __CONFIG_TI814X_EVM_H */ diff --git a/include/configs/titanium.h b/include/configs/titanium.h new file mode 100644 index 0000000..41e4513 --- /dev/null +++ b/include/configs/titanium.h @@ -0,0 +1,277 @@ +/* + * Copyright (C) 2013 Stefan Roese <sr@denx.de> + * + * Configuration settings for the ProjectionDesign / Barco + * Titanium board. + * + * Based on mx6qsabrelite.h which is: + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> + +#define CONFIG_MX6 +#define CONFIG_MX6Q +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define MACH_TYPE_TITANIUM 3769 +#define CONFIG_MACH_TYPE MACH_TYPE_TITANIUM + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 1 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_FEC_MXC_PHYADDR 4 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 + +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + +/* Miscellaneous commands */ +#define CONFIG_CMD_BMODE + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20)) + +#define CONFIG_HOSTNAME titanium +#define CONFIG_UBI_PART ubi +#define CONFIG_UBIFS_VOLUME rootfs0 + +#define MTDIDS_DEFAULT "nand0=gpmi-nand" +#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \ + "512k(env2),-(ubi)" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ + "kernel_fs=/boot/uImage\0" \ + "kernel_addr=11000000\0" \ + "dtb=" __stringify(CONFIG_HOSTNAME) "/" \ + __stringify(CONFIG_HOSTNAME) ".dtb\0" \ + "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0" \ + "dtb_addr=12800000\0" \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "console=ttymxc0\0" \ + "baudrate=115200\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "mmcdev=0\0" \ + "mmcpart=1\0" \ + "uimage=uImage\0" \ + "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \ + " ${script}\0" \ + "bootscript=echo Running bootscript from mmc ...; source\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "mmcroot=/dev/mmcblk0p2\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot} rootwait rw\0" \ + "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \ + " ${uimage}; bootm\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addcon=setenv bootargs ${bootargs} console=ttymxc0," \ + "${baudrate}\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0" \ + "part=" __stringify(CONFIG_UBI_PART) "\0" \ + "boot_vol=0\0" \ + "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \ + "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \ + "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \ + " ${filesize}\0" \ + "upd_ubifs=run load_ubifs update_ubifs\0" \ + "init_ubi=nand erase.part ubi;ubi part ${part};" \ + "ubi create ${vol} c800000\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \ + " addcon addmtd;" \ + "bootm ${kernel_addr} - ${dtb_addr}\0" \ + "ubifsargs=set bootargs ubi.mtd=ubi " \ + "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0" \ + "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0" \ + "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \ + "ubifsload ${dtb_addr} ${dtb_fs};\0" \ + "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \ + "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0" \ + "load_kernel=tftp ${kernel_addr} ${kernel}\0" \ + "load_dtb=tftp ${dtb_addr} ${dtb}\0" \ + "net_nfs=run load_dtb load_kernel; " \ + "run nfsargs addip addcon addmtd;" \ + "bootm ${kernel_addr} - ${dtb_addr}\0" \ + "delenv=env default -a -f; saveenv; reset\0" + +#define CONFIG_BOOTCOMMAND "run nand_ubifs" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "Titanium > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ + +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE (512 << 20) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +/* Enable NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS +#define CONFIG_CMD_TIME + +#ifdef CONFIG_CMD_NAND + +/* NAND stuff */ +#define CONFIG_NAND_MXS +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* DMA stuff, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 + +/* Environment in NAND */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (16 << 20) +#define CONFIG_ENV_SECT_SIZE (128 << 10) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10)) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#else /* CONFIG_CMD_NAND */ + +/* Environment in MMC */ +#define CONFIG_ENV_SIZE (8 << 10) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (6 * 64 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#endif /* CONFIG_CMD_NAND */ + +/* UBI/UBIFS config options */ +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_RBTREE +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h index d6371fc..cabc06e 100644 --- a/include/configs/tnetv107x_evm.h +++ b/include/configs/tnetv107x_evm.h @@ -82,8 +82,8 @@ #define CONFIG_SYS_NAND_CS 2 #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE -#define CONFIG_SYS_CLE_MASK 0x10 -#define CONFIG_SYS_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_MASK_CLE 0x10 +#define CONFIG_SYS_NAND_MASK_ALE 0x8 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h new file mode 100644 index 0000000..9e230ad --- /dev/null +++ b/include/configs/vexpress_ca15_tc2.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2013 Linaro + * Andre Przywara, <andre.przywara@linaro.org> + * + * Configuration for Versatile Express. Parts were derived from other ARM + * configurations. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __VEXPRESS_CA15X2_TC2_h +#define __VEXPRESS_CA15X2_TC2_h + +#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP +#include "vexpress_common.h" +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca15x2_tc2" + +#define CONFIG_SYS_CLK_FREQ 24000000 + +#endif diff --git a/include/configs/vexpress_ca5x2.h b/include/configs/vexpress_ca5x2.h new file mode 100644 index 0000000..9331134 --- /dev/null +++ b/include/configs/vexpress_ca5x2.h @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2011 Linaro + * Ryan Harkin, <ryan.harkin@linaro.org> + * + * Configuration for Versatile Express. Parts were derived from other ARM + * configurations. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __VEXPRESS_CA5X2_h +#define __VEXPRESS_CA5X2_h + +#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP +#include "vexpress_common.h" +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca5x2" + +#endif /* __VEXPRESS_CA5X2_h */ diff --git a/include/configs/vexpress_ca9x4.h b/include/configs/vexpress_ca9x4.h new file mode 100644 index 0000000..c3b6986 --- /dev/null +++ b/include/configs/vexpress_ca9x4.h @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2011 Linaro + * Ryan Harkin, <ryan.harkin@linaro.org> + * + * Configuration for Versatile Express. Parts were derived from other ARM + * configurations. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __VEXPRESS_CA9X4_H +#define __VEXPRESS_CA9X4_H + +#define CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP +#include "vexpress_common.h" +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca9x4" + +#endif /* VEXPRESS_CA9X4_H */ diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/vexpress_common.h index a7cd1d4..3c5683a 100644 --- a/include/configs/ca9x4_ct_vxp.h +++ b/include/configs/vexpress_common.h @@ -1,4 +1,5 @@ /* + * (C) Copyright 2011 ARM Limited * (C) Copyright 2010 Linaro * Matt Waddel, <matt.waddel@linaro.org> * @@ -24,15 +25,113 @@ * MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __VEXPRESS_COMMON_H +#define __VEXPRESS_COMMON_H + +/* + * Definitions copied from linux kernel: + * arch/arm/mach-vexpress/include/mach/motherboard.h + */ +#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP +/* CS register bases for the original memory map. */ +#define V2M_PA_CS0 0x40000000 +#define V2M_PA_CS1 0x44000000 +#define V2M_PA_CS2 0x48000000 +#define V2M_PA_CS3 0x4c000000 +#define V2M_PA_CS7 0x10000000 + +#define V2M_PERIPH_OFFSET(x) (x << 12) +#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(0)) +#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1)) +#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2)) + +#define V2M_BASE 0x60000000 +#define CONFIG_SYS_TEXT_BASE 0x60800000 +#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP) +/* CS register bases for the extended memory map. */ +#define V2M_PA_CS0 0x08000000 +#define V2M_PA_CS1 0x0c000000 +#define V2M_PA_CS2 0x14000000 +#define V2M_PA_CS3 0x18000000 +#define V2M_PA_CS7 0x1c000000 + +#define V2M_PERIPH_OFFSET(x) (x << 16) +#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1)) +#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2)) +#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(3)) + +#define V2M_BASE 0x80000000 +#define CONFIG_SYS_TEXT_BASE 0x80800000 +#endif + +/* + * Physical addresses, offset from V2M_PA_CS0-3 + */ +#define V2M_NOR0 (V2M_PA_CS0) +#define V2M_NOR1 (V2M_PA_CS1) +#define V2M_SRAM (V2M_PA_CS2) +#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000) +#define V2M_LAN9118 (V2M_PA_CS3 + 0x02000000) +#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000) + +/* Common peripherals relative to CS7. */ +#define V2M_AACI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(4)) +#define V2M_MMCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(5)) +#define V2M_KMI0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(6)) +#define V2M_KMI1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(7)) + +#define V2M_UART0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(9)) +#define V2M_UART1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(10)) +#define V2M_UART2 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(11)) +#define V2M_UART3 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(12)) + +#define V2M_WDT (V2M_PA_CS7 + V2M_PERIPH_OFFSET(15)) + +#define V2M_TIMER01 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(17)) +#define V2M_TIMER23 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(18)) + +#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(22)) +#define V2M_RTC (V2M_PA_CS7 + V2M_PERIPH_OFFSET(23)) + +#define V2M_CF (V2M_PA_CS7 + V2M_PERIPH_OFFSET(26)) + +#define V2M_CLCD (V2M_PA_CS7 + V2M_PERIPH_OFFSET(31)) +#define V2M_SIZE_CS7 V2M_PERIPH_OFFSET(32) + +/* System register offsets. */ +#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) +#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) +#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) + +/* + * Configuration + */ +#define SYS_CFG_START (1 << 31) +#define SYS_CFG_WRITE (1 << 30) +#define SYS_CFG_OSC (1 << 20) +#define SYS_CFG_VOLT (2 << 20) +#define SYS_CFG_AMP (3 << 20) +#define SYS_CFG_TEMP (4 << 20) +#define SYS_CFG_RESET (5 << 20) +#define SYS_CFG_SCC (6 << 20) +#define SYS_CFG_MUXFPGA (7 << 20) +#define SYS_CFG_SHUTDOWN (8 << 20) +#define SYS_CFG_REBOOT (9 << 20) +#define SYS_CFG_DVIMODE (11 << 20) +#define SYS_CFG_POWER (12 << 20) +#define SYS_CFG_SITE_MB (0 << 16) +#define SYS_CFG_SITE_DB1 (1 << 16) +#define SYS_CFG_SITE_DB2 (2 << 16) +#define SYS_CFG_STACK(n) ((n) << 12) + +#define SYS_CFG_ERR (1 << 1) +#define SYS_CFG_COMPLETE (1 << 0) /* Board info register */ -#define SYS_ID 0x10000000 +#define SYS_ID V2M_SYSREGS #define CONFIG_REVISION_TAG 1 -#define CONFIG_SYS_TEXT_BASE 0x60800000 -#define CONFIG_SYS_MEMTEST_START 0x60000000 +#define CONFIG_SYS_MEMTEST_START V2M_BASE #define CONFIG_SYS_MEMTEST_END 0x20000000 #define CONFIG_SYS_HZ 1000 @@ -46,13 +145,13 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -#define SCTL_BASE 0x10001000 +#define SCTL_BASE V2M_SYSCTL #define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0) /* SMSC9115 Ethernet from SMSC9118 family */ #define CONFIG_SMC911X 1 #define CONFIG_SMC911X_32_BIT 1 -#define CONFIG_SMC911X_BASE 0x4E000000 +#define CONFIG_SMC911X_BASE V2M_LAN9118 /* PL011 Serial Configuration */ #define CONFIG_PL011_SERIAL @@ -62,8 +161,9 @@ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 38400 -#define CONFIG_SYS_SERIAL0 0x10009000 -#define CONFIG_SYS_SERIAL1 0x1000A000 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_SERIAL0 V2M_UART0 +#define CONFIG_SYS_SERIAL1 V2M_UART1 /* Command line configuration */ #define CONFIG_CMD_BDI @@ -79,6 +179,8 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_RUN +#define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION 1 @@ -86,7 +188,7 @@ #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_ARM_PL180_MMCI -#define CONFIG_ARM_PL180_MMCI_BASE 0x10005000 +#define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI #define CONFIG_SYS_MMC_MAX_BLK_COUNT 127 #define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000 @@ -97,18 +199,18 @@ #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_PXE #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.ca9x4_ct_vxp" /* Miscellaneous configurable options */ #undef CONFIG_SYS_CLKS_IN_HZ -#define CONFIG_SYS_LOAD_ADDR 0x60008000 /* load address */ -#define LINUX_BOOT_PARAM_ADDR 0x60000200 +#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000) +#define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000) #define CONFIG_BOOTDELAY 2 /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 0x60000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */ +#define PHYS_SDRAM_2 (((unsigned int)V2M_BASE) + \ + ((unsigned int)0x20000000)) #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ #define PHYS_SDRAM_2_SIZE 0x20000000 /* 512 MB */ @@ -122,14 +224,27 @@ /* Basic environment settings */ #define CONFIG_BOOTCOMMAND "run bootflash;" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP +#define CONFIG_PLATFORM_ENV_SETTINGS \ "loadaddr=0x80008000\0" \ "ramdisk_addr_r=0x61000000\0" \ "kernel_addr=0x44100000\0" \ "ramdisk_addr=0x44800000\0" \ "maxramdisk=0x1800000\0" \ "pxefile_addr_r=0x88000000\0" \ - "kernel_addr_r=0x80008000\0" \ + "kernel_addr_r=0x80008000\0" +#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP) +#define CONFIG_PLATFORM_ENV_SETTINGS \ + "loadaddr=0xa0008000\0" \ + "ramdisk_addr_r=0x81000000\0" \ + "kernel_addr=0x0c100000\0" \ + "ramdisk_addr=0x0c800000\0" \ + "maxramdisk=0x1800000\0" \ + "pxefile_addr_r=0xa8000000\0" \ + "kernel_addr_r=0xa0008000\0" +#endif +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_PLATFORM_ENV_SETTINGS \ "console=ttyAMA0,38400n8\0" \ "dram=1024M\0" \ "root=/dev/sda1 rw\0" \ @@ -148,8 +263,8 @@ #define CONFIG_FLASH_CFI_DRIVER 1 #define CONFIG_SYS_FLASH_SIZE 0x04000000 #define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BASE0 0x40000000 -#define CONFIG_SYS_FLASH_BASE1 0x44000000 +#define CONFIG_SYS_FLASH_BASE0 V2M_NOR0 +#define CONFIG_SYS_FLASH_BASE1 V2M_NOR1 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0 /* Timeout values in ticks */ @@ -189,10 +304,12 @@ #define CONFIG_SYS_PROMPT "VExpress# " #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_HUSH_PARSER + #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_CMD_SOURCE #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_SYS_MAXARGS 16 /* max command args */ -#endif +#endif /* VEXPRESS_COMMON_H */ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 120e3f6..9d7ec3f 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -32,6 +32,7 @@ #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART @@ -47,6 +48,9 @@ #undef CONFIG_CMD_IMLS +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_SETEXPR + #define CONFIG_BOOTDELAY 5 #define CONFIG_SYS_MEMTEST_START 0x10000000 @@ -57,6 +61,7 @@ /* MMC Configuration */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_MMC @@ -97,9 +102,23 @@ "fdt_addr=0x11000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ - "mmcdev=0\0" \ - "mmcpart=2\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_ENV_PART) "\0" \ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "update_sd_firmware_filename=u-boot.imx\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if mmc dev ${mmcdev}; then " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "fi; " \ + "fi\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ @@ -198,6 +217,7 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET (6 * 64 * 1024) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 2989e72..38f04f6 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -50,19 +50,50 @@ #define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE #define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000 -/* SCU timer address is hardcoded */ -#define CONFIG_SCUTIMER_BASEADDR 0xF8F00600 - /* Ethernet driver */ #define CONFIG_NET_MULTI #define CONFIG_ZYNQ_GEM -#define CONFIG_ZYNQ_GEM_BASEADDR0 0xE000B000 +#define CONFIG_ZYNQ_GEM0 +#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 + +#define CONFIG_ZYNQ_SDHCI +#define CONFIG_ZYNQ_SDHCI0 + +/* MMC */ +#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) +# define CONFIG_MMC +# define CONFIG_GENERIC_MMC +# define CONFIG_SDHCI +# define CONFIG_ZYNQ_SDHCI +# define CONFIG_CMD_MMC +# define CONFIG_CMD_FAT +# define CONFIG_SUPPORT_VFAT +# define CONFIG_CMD_EXT2 +# define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_ZYNQ_I2C0 + +/* I2C */ +#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1) +# define CONFIG_CMD_I2C +# define CONFIG_ZYNQ_I2C +# define CONFIG_HARD_I2C +# define CONFIG_SYS_I2C_SPEED 100000 +# define CONFIG_SYS_I2C_SLAVE 1 +#endif #if defined(CONFIG_ZYNQ_DCC) # define CONFIG_ARM_DCC # define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ #endif +/* Enable the PL to be downloaded */ +#define CONFIG_FPGA +#define CONFIG_FPGA_XILINX +#define CONFIG_FPGA_ZYNQPL +#define CONFIG_CMD_FPGA + #define CONFIG_BOOTP_SERVERIP #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY diff --git a/include/ext4fs.h b/include/ext4fs.h index 025a2e8..379f7eb 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -141,4 +141,5 @@ long int read_allocated_block(struct ext2_inode *inode, int fileblock); int ext4fs_probe(block_dev_desc_t *fs_dev_desc, disk_partition_t *fs_partition); int ext4_read_file(const char *filename, void *buf, int offset, int len); +int ext4_read_superblock(char *buffer); #endif diff --git a/include/ext_common.h b/include/ext_common.h index 86373a6..78a7808 100644 --- a/include/ext_common.h +++ b/include/ext_common.h @@ -34,7 +34,6 @@ #define __EXT_COMMON__ #include <command.h> #define SECTOR_SIZE 0x200 -#define SECTOR_BITS 9 /* Magic value used to identify an ext2 filesystem. */ #define EXT2_MAGIC 0xEF53 @@ -58,18 +57,13 @@ #define FILETYPE_INO_SYMLINK 0120000 #define EXT2_ROOT_INO 2 /* Root inode */ -/* Bits used as offset in sector */ -#define DISK_SECTOR_BITS 9 /* The size of an ext2 block in bytes. */ #define EXT2_BLOCK_SIZE(data) (1 << LOG2_BLOCK_SIZE(data)) -/* Log2 size of ext2 block in 512 blocks. */ -#define LOG2_EXT2_BLOCK_SIZE(data) (__le32_to_cpu \ - (data->sblock.log2_block_size) + 1) - /* Log2 size of ext2 block in bytes. */ -#define LOG2_BLOCK_SIZE(data) (__le32_to_cpu \ - (data->sblock.log2_block_size) + 10) +#define LOG2_BLOCK_SIZE(data) (__le32_to_cpu \ + (data->sblock.log2_block_size) \ + + EXT2_MIN_BLOCK_LOG_SIZE) #define INODE_SIZE_FILESYSTEM(data) (__le32_to_cpu \ (data->sblock.inode_size)) diff --git a/include/faraday/ftsdc010.h b/include/faraday/ftsdc010.h index c34dde7..8284f53 100644 --- a/include/faraday/ftsdc010.h +++ b/include/faraday/ftsdc010.h @@ -23,6 +23,7 @@ #define __FTSDC010_H #ifndef __ASSEMBLY__ + /* sd controller register */ struct ftsdc010_mmc { unsigned int cmd; /* 0x00 - command reg */ @@ -143,6 +144,15 @@ int ftsdc010_mmc_init(int dev_index); #define FTSDC010_STATUS_SDIO_IRPT (1 << 16) /* SDIO card intr */ #define FTSDC010_STATUS_DATA0_STATUS (1 << 17) #endif /* CONFIG_FTSDC010_SDIO */ +#define FTSDC010_STATUS_RSP_ERROR \ + (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_RSP_TIMEOUT) +#define FTSDC010_STATUS_RSP_MASK \ + (FTSDC010_STATUS_RSP_ERROR | FTSDC010_STATUS_RSP_CRC_OK) +#define FTSDC010_STATUS_DATA_ERROR \ + (FTSDC010_STATUS_DATA_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT) +#define FTSDC010_STATUS_DATA_MASK \ + (FTSDC010_STATUS_DATA_ERROR | FTSDC010_STATUS_DATA_CRC_OK \ + | FTSDC010_STATUS_DATA_END) /* 0x2c - clear register */ #define FTSDC010_CLR_RSP_CRC_FAIL (1 << 0) @@ -192,21 +202,24 @@ int ftsdc010_mmc_init(int dev_index); #define FTSDC010_CCR_CLK_DIV(x) (((x) & 0x7f) << 0) #define FTSDC010_CCR_CLK_SD (1 << 7) /* 0: MMC, 1: SD */ #define FTSDC010_CCR_CLK_DIS (1 << 8) +#define FTSDC010_CCR_CLK_HISPD (1 << 9) /* high speed */ /* card type */ #define FTSDC010_CARD_TYPE_SD FTSDC010_CLOCK_REG_CARD_TYPE #define FTSDC010_CARD_TYPE_MMC 0x0 /* 0x3c - bus width register */ -#define FTSDC010_BWR_SINGLE_BUS (1 << 0) -#define FTSDC010_BWR_WIDE_8_BUS (1 << 1) -#define FTSDC010_BWR_WIDE_4_BUS (1 << 2) -#define FTSDC010_BWR_WIDE_BUS_SUPPORT(x) (((x) >> 3) & 0x3) -#define FTSDC010_BWR_CARD_DETECT (1 << 5) - -#define FTSDC010_BWR_1_BUS_SUPPORT 0x0 -#define FTSDC010_BWR_4_BUS_SUPPORT 0x1 -#define FTSDC010_BWR_8_BUS_SUPPORT 0x2 +#define FTSDC010_BWR_MODE_1BIT (1 << 0) /* 1 bit mode enabled */ +#define FTSDC010_BWR_MODE_8BIT (1 << 1) /* 8 bit mode enabled */ +#define FTSDC010_BWR_MODE_4BIT (1 << 2) /* 4 bit mode enabled */ +#define FTSDC010_BWR_MODE_MASK (7 << 0) +#define FTSDC010_BWR_MODE_SHIFT (0) +#define FTSDC010_BWR_CAPS_1BIT (0 << 3) /* 1 bits mode supported */ +#define FTSDC010_BWR_CAPS_4BIT (1 << 3) /* 1,4 bits mode supported */ +#define FTSDC010_BWR_CAPS_8BIT (2 << 3) /* 1,4,8 bits mode supported */ +#define FTSDC010_BWR_CAPS_MASK (3 << 3) +#define FTSDC010_BWR_CAPS_SHIFT (3) +#define FTSDC010_BWR_CARD_DETECT (1 << 5) /* 0x44 or 0x9c - feature register */ #define FTSDC010_FEATURE_FIFO_DEPTH(x) (((x) >> 0) & 0xff) diff --git a/include/fdt.h b/include/fdt.h index f9612ed..526aedb 100644 --- a/include/fdt.h +++ b/include/fdt.h @@ -1,5 +1,56 @@ #ifndef _FDT_H #define _FDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * Copyright 2012 Kim Phillips, Freescale Semiconductor. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ #ifndef __ASSEMBLY__ @@ -57,6 +108,4 @@ struct fdt_property { #define FDT_V16_SIZE FDT_V3_SIZE #define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(fdt32_t)) -/* adding a ramdisk needs 0x44 bytes in version 2008.10 */ -#define FDT_RAMDISK_OVERHEAD 0x80 #endif /* _FDT_H */ diff --git a/include/fdt_support.h b/include/fdt_support.h index 2cccc35..8f07a67 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -78,11 +78,9 @@ static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); #endif -#ifdef CONFIG_OF_BOARD_SETUP void ft_board_setup(void *blob, bd_t *bd); void ft_cpu_setup(void *blob, bd_t *bd); void ft_pci_setup(void *blob, bd_t *bd); -#endif void set_working_fdt_addr(void *addr); int fdt_resize(void *blob); diff --git a/include/fdtdec.h b/include/fdtdec.h index 4e8032b..1ece612 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -93,6 +93,7 @@ enum fdt_compat_id { COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */ COMPAT_MAXIM_98095_CODEC, /* MAX98095 Codec */ COMPAT_INFINEON_SLB9635_TPM, /* Infineon SLB9635 TPM */ + COMPAT_INFINEON_SLB9645_TPM, /* Infineon SLB9645 TPM */ COMPAT_COUNT, }; diff --git a/include/fm_eth.h b/include/fm_eth.h index 495765b..8fcf172 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -88,7 +88,7 @@ enum fm_eth_type { #define FM_TGEC_INFO_INITIALIZER(idx, n) \ { \ - FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM2_TGEC_MDIO_ADDR) \ .index = idx, \ .num = n - 1, \ .type = FM_ETH_10G_E, \ @@ -96,7 +96,7 @@ enum fm_eth_type { .rx_port_id = RX_PORT_10G_BASE + n - 1, \ .tx_port_id = TX_PORT_10G_BASE + n - 1, \ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ - offsetof(struct ccsr_fman, memac[n-1]),\ + offsetof(struct ccsr_fman, memac[n-1+8]),\ } #else #define FM_DTSEC_INFO_INITIALIZER(idx, n) \ diff --git a/include/fpga.h b/include/fpga.h index 30a4e6a..38e9018 100644 --- a/include/fpga.h +++ b/include/fpga.h @@ -31,16 +31,6 @@ #define CONFIG_MAX_FPGA_DEVICES 5 #endif -/* CONFIG_FPGA bit assignments */ -#define CONFIG_SYS_FPGA_MAN(x) (x) -#define CONFIG_SYS_FPGA_DEV(x) ((x) << 8 ) -#define CONFIG_SYS_FPGA_IF(x) ((x) << 16 ) - -/* FPGA Manufacturer bits in CONFIG_FPGA */ -#define CONFIG_SYS_FPGA_XILINX CONFIG_SYS_FPGA_MAN( 0x1 ) -#define CONFIG_SYS_FPGA_ALTERA CONFIG_SYS_FPGA_MAN( 0x2 ) - - /* fpga_xxxx function return value definitions */ #define FPGA_SUCCESS 0 #define FPGA_FAIL -1 @@ -68,7 +58,10 @@ extern void fpga_init(void); extern int fpga_add(fpga_type devtype, void *desc); extern int fpga_count(void); extern int fpga_load(int devnum, const void *buf, size_t bsize); +extern int fpga_loadbitstream(int devnum, char *fpgadata, size_t size); extern int fpga_dump(int devnum, const void *buf, size_t bsize); extern int fpga_info(int devnum); +extern const fpga_desc *const fpga_validate(int devnum, const void *buf, + size_t bsize, char *fn); #endif /* _FPGA_H_ */ diff --git a/include/fuse.h b/include/fuse.h new file mode 100644 index 0000000..b964137 --- /dev/null +++ b/include/fuse.h @@ -0,0 +1,44 @@ +/* + * (C) Copyright 2009-2013 ADVANSEE + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on the mpc512x iim code: + * Copyright 2008 Silicon Turnkey Express, Inc. + * Martha Marx <mmarx@silicontkx.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _FUSE_H_ +#define _FUSE_H_ + +/* + * Read/Sense/Program/Override interface: + * bank: Fuse bank + * word: Fuse word within the bank + * val: Value to read/write + * + * Returns: 0 on success, not 0 on failure + */ +int fuse_read(u32 bank, u32 word, u32 *val); +int fuse_sense(u32 bank, u32 word, u32 *val); +int fuse_prog(u32 bank, u32 word, u32 val); +int fuse_override(u32 bank, u32 word, u32 val); + +#endif /* _FUSE_H_ */ diff --git a/include/hash.h b/include/hash.h index 2dbbd9b..c402067 100644 --- a/include/hash.h +++ b/include/hash.h @@ -71,4 +71,26 @@ enum { int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +/** + * hash_block() - Hash a block according to the requested algorithm + * + * The caller probably knows the hash length for the chosen algorithm, but + * in order to provide a general interface, and output_size parameter is + * provided. + * + * @algo_name: Hash algorithm to use + * @data: Data to hash + * @len: Lengh of data to hash in bytes + * @output: Place to put hash value + * @output_size: On entry, pointer to the number of bytes available in + * output. On exit, pointer to the number of bytes used. + * If NULL, then it is assumed that the caller has + * allocated enough space for the hash. This is possible + * since the caller is selecting the algorithm. + * @return 0 if ok, -ve on error: -EPROTONOSUPPORT for an unknown algorithm, + * -ENOSPC if the output buffer is not large enough. + */ +int hash_block(const char *algo_name, const void *data, unsigned int len, + uint8_t *output, int *output_size); + #endif diff --git a/include/image.h b/include/image.h index 4ad0e6b..8ccc00b 100644 --- a/include/image.h +++ b/include/image.h @@ -36,6 +36,9 @@ #include "compiler.h" #include <asm/byteorder.h> +/* Define this to avoid #ifdefs later on */ +struct lmb; + #ifdef USE_HOSTCC /* new uImage format support enabled on host */ @@ -43,19 +46,79 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ +#define IMAGE_ENABLE_IGNORE 0 +#define IMAGE_INDENT_STRING "" + #else #include <lmb.h> #include <asm/u-boot.h> #include <command.h> +/* Take notice of the 'ignore' property for hashes */ +#define IMAGE_ENABLE_IGNORE 1 +#define IMAGE_INDENT_STRING " " + #endif /* USE_HOSTCC */ #if defined(CONFIG_FIT) #include <libfdt.h> #include <fdt_support.h> -#define CONFIG_MD5 /* FIT images need MD5 support */ -#define CONFIG_SHA1 /* and SHA1 */ +# ifdef CONFIG_SPL_BUILD +# ifdef CONFIG_SPL_CRC32_SUPPORT +# define IMAGE_ENABLE_CRC32 1 +# endif +# ifdef CONFIG_SPL_MD5_SUPPORT +# define IMAGE_ENABLE_MD5 1 +# endif +# ifdef CONFIG_SPL_SHA1_SUPPORT +# define IMAGE_ENABLE_SHA1 1 +# endif +# else +# define CONFIG_CRC32 /* FIT images need CRC32 support */ +# define CONFIG_MD5 /* and MD5 */ +# define CONFIG_SHA1 /* and SHA1 */ +# define IMAGE_ENABLE_CRC32 1 +# define IMAGE_ENABLE_MD5 1 +# define IMAGE_ENABLE_SHA1 1 +# endif + +#ifndef IMAGE_ENABLE_CRC32 +#define IMAGE_ENABLE_CRC32 0 +#endif + +#ifndef IMAGE_ENABLE_MD5 +#define IMAGE_ENABLE_MD5 0 +#endif + +#ifndef IMAGE_ENABLE_SHA1 +#define IMAGE_ENABLE_SHA1 0 +#endif + +#endif /* CONFIG_FIT */ + +#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH +# define IMAGE_ENABLE_RAMDISK_HIGH 1 +#else +# define IMAGE_ENABLE_RAMDISK_HIGH 0 +#endif + +#ifdef CONFIG_OF_LIBFDT +# define IMAGE_ENABLE_OF_LIBFDT 1 +#else +# define IMAGE_ENABLE_OF_LIBFDT 0 +#endif + +#ifdef CONFIG_SYS_BOOT_GET_CMDLINE +# define IMAGE_BOOT_GET_CMDLINE 1 +#else +# define IMAGE_BOOT_GET_CMDLINE 0 +#endif + +#ifdef CONFIG_OF_BOARD_SETUP +# define IMAAGE_OF_BOARD_SETUP 1 +#else +# define IMAAGE_OF_BOARD_SETUP 0 #endif /* @@ -244,9 +307,7 @@ typedef struct bootm_headers { ulong rd_start, rd_end;/* ramdisk start/end */ -#ifdef CONFIG_OF_LIBFDT char *ft_addr; /* flat dev tree address */ -#endif ulong ft_len; /* length of flat device tree */ ulong initrd_start; @@ -333,34 +394,105 @@ int genimg_get_type_id(const char *name); int genimg_get_comp_id(const char *name); void genimg_print_size(uint32_t size); +#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \ + defined(USE_HOSTCC) +#define IMAGE_ENABLE_TIMESTAMP 1 +#else +#define IMAGE_ENABLE_TIMESTAMP 0 +#endif +void genimg_print_time(time_t timestamp); + +/* What to do with a image load address ('load = <> 'in the FIT) */ +enum fit_load_op { + FIT_LOAD_IGNORED, /* Ignore load address */ + FIT_LOAD_OPTIONAL, /* Can be provided, but optional */ + FIT_LOAD_REQUIRED, /* Must be provided */ +}; + #ifndef USE_HOSTCC /* Image format types, returned by _get_format() routine */ #define IMAGE_FORMAT_INVALID 0x00 #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */ -int genimg_get_format(void *img_addr); +int genimg_get_format(const void *img_addr); int genimg_has_config(bootm_headers_t *images); ulong genimg_get_image(ulong img_addr); int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, uint8_t arch, ulong *rd_start, ulong *rd_end); +/** + * fit_image_load() - load an image from a FIT + * + * This deals with all aspects of loading an image from a FIT, including + * selecting the right image based on configuration, verifying it, printing + * out progress messages, checking the type/arch/os and optionally copying it + * to the right load address. + * + * @param images Boot images structure + * @param prop_name Property name to look up (FIT_..._PROP) + * @param addr Address of FIT in memory + * @param fit_unamep On entry this is the requested image name + * (e.g. "kernel@1") or NULL to use the default. On exit + * points to the selected image name + * @param fit_uname_config Requested configuration name, or NULL for the + * default + * @param arch Expected architecture (IH_ARCH_...) + * @param image_type Required image type (IH_TYPE_...). If this is + * IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD + * also. + * @param bootstage_id ID of starting bootstage to use for progress updates. + * This will be added to the BOOTSTAGE_SUB values when + * calling bootstage_mark() + * @param load_op Decribes what to do with the load address + * @param datap Returns address of loaded image + * @param lenp Returns length of loaded image + */ +int fit_image_load(bootm_headers_t *images, const char *prop_name, ulong addr, + const char **fit_unamep, const char *fit_uname_config, + int arch, int image_type, int bootstage_id, + enum fit_load_op load_op, ulong *datap, ulong *lenp); -#ifdef CONFIG_OF_LIBFDT -int boot_get_fdt(int flag, int argc, char * const argv[], - bootm_headers_t *images, char **of_flat_tree, ulong *of_size); +/** + * fit_get_node_from_config() - Look up an image a FIT by type + * + * This looks in the selected conf@ node (images->fit_uname_cfg) for a + * particular image type (e.g. "kernel") and then finds the image that is + * referred to. + * + * For example, for something like: + * + * images { + * kernel@1 { + * ... + * }; + * }; + * configurations { + * conf@1 { + * kernel = "kernel@1"; + * }; + * }; + * + * the function will return the node offset of the kernel@1 node, assuming + * that conf@1 is the chosen configuration. + * + * @param images Boot images structure + * @param prop_name Property name to look up (FIT_..._PROP) + * @param addr Address of FIT in memory + */ +int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name, + ulong addr); + +int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, + bootm_headers_t *images, + char **of_flat_tree, ulong *of_size); void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob); int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size); -#endif -#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len, ulong *initrd_start, ulong *initrd_end); -#endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */ -#ifdef CONFIG_SYS_BOOT_GET_CMDLINE int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end); -#endif /* CONFIG_SYS_BOOT_GET_CMDLINE */ #ifdef CONFIG_SYS_BOOT_GET_KBD int boot_get_kbd(struct lmb *lmb, bd_t **kbd); #endif /* CONFIG_SYS_BOOT_GET_KBD */ @@ -502,6 +634,31 @@ static inline int image_check_target_arch(const image_header_t *hdr) } #endif /* USE_HOSTCC */ +/** + * Set up properties in the FDT + * + * This sets up properties in the FDT that is to be passed to linux. + * + * @images: Images information + * @blob: FDT to update + * @of_size: Size of the FDT + * @lmb: Points to logical memory block structure + * @return 0 if ok, <0 on failure + */ +int image_setup_libfdt(bootm_headers_t *images, void *blob, + int of_size, struct lmb *lmb); + +/** + * Set up the FDT to use for booting a kernel + * + * This performs ramdisk setup, sets up the FDT if required, and adds + * paramters to the FDT if libfdt is available. + * + * @param images Images information + * @return 0 if ok, <0 on failure + */ +int image_setup_linux(bootm_headers_t *images); + /*******************************************************************/ /* New uImage format specific code (prefixed with fit_) */ /*******************************************************************/ @@ -543,7 +700,6 @@ int fit_parse_subimage(const char *spec, ulong addr_curr, void fit_print_contents(const void *fit); void fit_image_print(const void *fit, int noffset, const char *p); -void fit_image_print_hash(const void *fit, int noffset, const char *p); /** * fit_get_end - get FIT image size @@ -599,18 +755,20 @@ int fit_image_get_data(const void *fit, int noffset, int fit_image_hash_get_algo(const void *fit, int noffset, char **algo); int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, int *value_len); -#ifndef USE_HOSTCC -int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore); -#endif int fit_set_timestamp(void *fit, int noffset, time_t timestamp); -int fit_set_hashes(void *fit); -int fit_image_set_hashes(void *fit, int image_noffset); -int fit_image_hash_set_value(void *fit, int noffset, uint8_t *value, - int value_len); -int fit_image_check_hashes(const void *fit, int noffset); -int fit_all_image_check_hashes(const void *fit); +/** + * fit_add_verification_data() - Calculate and add hashes to FIT + * + * @fit: Fit image to process + * @return 0 if ok, <0 for error + */ +int fit_add_verification_data(void *fit); + +int fit_image_verify(const void *fit, int noffset); +int fit_config_verify(const void *fit, int conf_noffset); +int fit_all_image_verify(const void *fit); int fit_image_check_os(const void *fit, int noffset, uint8_t os); int fit_image_check_arch(const void *fit, int noffset, uint8_t arch); int fit_image_check_type(const void *fit, int noffset, uint8_t type); @@ -619,18 +777,58 @@ int fit_check_format(const void *fit); int fit_conf_find_compat(const void *fit, const void *fdt); int fit_conf_get_node(const void *fit, const char *conf_uname); -int fit_conf_get_kernel_node(const void *fit, int noffset); -int fit_conf_get_ramdisk_node(const void *fit, int noffset); -int fit_conf_get_fdt_node(const void *fit, int noffset); + +/** + * fit_conf_get_prop_node() - Get node refered to by a configuration + * @fit: FIT to check + * @noffset: Offset of conf@xxx node to check + * @prop_name: Property to read from the conf node + * + * The conf@ nodes contain references to other nodes, using properties + * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"), + * return the offset of the node referred to (e.g. offset of node + * "/images/kernel@1". + */ +int fit_conf_get_prop_node(const void *fit, int noffset, + const char *prop_name); void fit_conf_print(const void *fit, int noffset, const char *p); -#ifndef USE_HOSTCC +int fit_check_ramdisk(const void *fit, int os_noffset, + uint8_t arch, int verify); + +int calculate_hash(const void *data, int data_len, const char *algo, + uint8_t *value, int *value_len); + +/* + * At present we only support verification on the device + */ +#if defined(CONFIG_FIT_SIGNATURE) +# ifdef USE_HOSTCC +# define IMAGE_ENABLE_VERIFY 0 +#else +# define IMAGE_ENABLE_VERIFY 1 +# endif +#else +# define IMAGE_ENABLE_VERIFY 0 +#endif + +#ifdef USE_HOSTCC +# define gd_fdt_blob() NULL +#else +# define gd_fdt_blob() (gd->fdt_blob) +#endif + +#ifdef CONFIG_FIT_BEST_MATCH +#define IMAGE_ENABLE_BEST_MATCH 1 +#else +#define IMAGE_ENABLE_BEST_MATCH 0 +#endif + static inline int fit_image_check_target_arch(const void *fdt, int node) { return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT); } -#endif /* USE_HOSTCC */ #ifdef CONFIG_FIT_VERBOSE #define fit_unsupported(msg) printf("! %s:%d " \ diff --git a/include/lattice.h b/include/lattice.h index 6a2cf93..49871da 100644 --- a/include/lattice.h +++ b/include/lattice.h @@ -278,9 +278,6 @@ typedef struct { char *desc; /* description string */ } Lattice_desc; /* end, typedef Altera_desc */ -/* Lattice Model Type */ -#define CONFIG_SYS_XP2 CONFIG_SYS_FPGA_DEV(0x1) - /* Board specific implementation specific function types */ typedef void (*Lattice_jtag_init)(void); typedef void (*Lattice_jtag_set_tdi)(int v); diff --git a/include/libfdt.h b/include/libfdt.h index fc7f75b..c5ec2ac 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -136,6 +136,28 @@ uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); int fdt_next_node(const void *fdt, int offset, int *depth); +/** + * fdt_first_subnode() - get offset of first direct subnode + * + * @fdt: FDT blob + * @offset: Offset of node to check + * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none + */ +int fdt_first_subnode(const void *fdt, int offset); + +/** + * fdt_next_subnode() - get offset of next direct subnode + * + * After first calling fdt_first_subnode(), call this function repeatedly to + * get direct subnodes of a parent node. + * + * @fdt: FDT blob + * @offset: Offset of previous subnode + * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more + * subnodes + */ +int fdt_next_subnode(const void *fdt, int offset); + /**********************************************************************/ /* General functions */ /**********************************************************************/ @@ -582,7 +604,7 @@ const char *fdt_get_alias_namelen(const void *fdt, * value of the property named 'name' in the node /aliases. * * returns: - * a pointer to the expansion of the alias named 'name', of it exists + * a pointer to the expansion of the alias named 'name', if it exists * NULL, if the given alias or the /aliases node does not exist */ const char *fdt_get_alias(const void *fdt, const char *name); @@ -816,6 +838,20 @@ int fdt_node_check_compatible(const void *fdt, int nodeoffset, int fdt_node_offset_by_compatible(const void *fdt, int startoffset, const char *compatible); +/** + * fdt_stringlist_contains - check a string list property for a string + * @strlist: Property containing a list of strings to check + * @listlen: Length of property + * @str: String to search for + * + * This is a utility function provided for convenience. The list contains + * one or more strings, each terminated by \0, as is found in a device tree + * "compatible" property. + * + * @return: 1 if the string is found in the list, 0 not found, or invalid list + */ +int fdt_stringlist_contains(const char *strlist, int listlen, const char *str); + /**********************************************************************/ /* Write-in-place functions */ /**********************************************************************/ diff --git a/include/libfdt_env.h b/include/libfdt_env.h index 3e3defc..0821258 100644 --- a/include/libfdt_env.h +++ b/include/libfdt_env.h @@ -35,4 +35,7 @@ typedef __be64 fdt64_t; #define fdt64_to_cpu(x) be64_to_cpu(x) #define cpu_to_fdt64(x) cpu_to_be64(x) +/* adding a ramdisk needs 0x44 bytes in version 2008.10 */ +#define FDT_RAMDISK_OVERHEAD 0x80 + #endif /* _LIBFDT_ENV_H */ diff --git a/include/linux/bitrev.h b/include/linux/bitrev.h new file mode 100644 index 0000000..a61d956 --- /dev/null +++ b/include/linux/bitrev.h @@ -0,0 +1,23 @@ +/* + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + * + * Based on bitrev from the Linux kernel, by Akinobu Mita + */ + +#ifndef _LINUX_BITREV_H +#define _LINUX_BITREV_H + +#include <linux/types.h> + +extern u8 const byte_rev_table[256]; + +static inline u8 bitrev8(u8 byte) +{ + return byte_rev_table[byte]; +} + +u16 bitrev16(u16 in); +u32 bitrev32(u32 in); + +#endif /* _LINUX_BITREV_H */ diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h index 8cbcdae..71292b1 100644 --- a/include/linux/mtd/bbm.h +++ b/include/linux/mtd/bbm.h @@ -81,32 +81,53 @@ struct nand_bbt_descr { #define NAND_BBT_LASTBLOCK 0x00000010 /* The bbt is at the given page, else we must scan for the bbt */ #define NAND_BBT_ABSPAGE 0x00000020 -/* The bbt is at the given page, else we must scan for the bbt */ -#define NAND_BBT_SEARCH 0x00000040 /* bbt is stored per chip on multichip devices */ #define NAND_BBT_PERCHIP 0x00000080 /* bbt has a version counter at offset veroffs */ #define NAND_BBT_VERSION 0x00000100 /* Create a bbt if none exists */ #define NAND_BBT_CREATE 0x00000200 +/* + * Create an empty BBT with no vendor information. Vendor's information may be + * unavailable, for example, if the NAND controller has a different data and OOB + * layout or if this information is already purged. Must be used in conjunction + * with NAND_BBT_CREATE. + */ +#define NAND_BBT_CREATE_EMPTY 0x00000400 /* Search good / bad pattern through all pages of a block */ -#define NAND_BBT_SCANALLPAGES 0x00000400 +#define NAND_BBT_SCANALLPAGES 0x00000800 /* Scan block empty during good / bad block scan */ -#define NAND_BBT_SCANEMPTY 0x00000800 +#define NAND_BBT_SCANEMPTY 0x00001000 /* Write bbt if neccecary */ -#define NAND_BBT_WRITE 0x00001000 +#define NAND_BBT_WRITE 0x00002000 /* Read and write back block contents when writing bbt */ -#define NAND_BBT_SAVECONTENT 0x00002000 +#define NAND_BBT_SAVECONTENT 0x00004000 /* Search good / bad pattern on the first and the second page */ -#define NAND_BBT_SCAN2NDPAGE 0x00004000 +#define NAND_BBT_SCAN2NDPAGE 0x00008000 /* Search good / bad pattern on the last page of the eraseblock */ -#define NAND_BBT_SCANLASTPAGE 0x00008000 -/* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */ -#define NAND_BBT_SCANBYTE1AND6 0x00100000 -/* The nand_bbt_descr was created dynamicaly and must be freed */ -#define NAND_BBT_DYNAMICSTRUCT 0x00200000 -/* The bad block table does not OOB for marker */ -#define NAND_BBT_NO_OOB 0x00400000 +#define NAND_BBT_SCANLASTPAGE 0x00010000 +/* + * Use a flash based bad block table. By default, OOB identifier is saved in + * OOB area. This option is passed to the default bad block table function. + */ +#define NAND_BBT_USE_FLASH 0x00020000 +/* + * Do not store flash based bad block table marker in the OOB area; store it + * in-band. + */ +#define NAND_BBT_NO_OOB 0x00040000 +/* + * Do not write new bad block markers to OOB; useful, e.g., when ECC covers + * entire spare area. Must be used with NAND_BBT_USE_FLASH. + */ +#define NAND_BBT_NO_OOB_BBM 0x00080000 + +/* + * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr + * was allocated dynamicaly and must be freed in nand_release(). Has no meaning + * in nand_chip.bbt_options. + */ +#define NAND_BBT_DYNAMICSTRUCT 0x80000000 /* The maximum number of blocks to scan for a bbt */ #define NAND_BBT_SCAN_MAXBLOCKS 4 diff --git a/include/linux/mtd/docg4.h b/include/linux/mtd/docg4.h new file mode 100644 index 0000000..982f5ad --- /dev/null +++ b/include/linux/mtd/docg4.h @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + * + */ + +#ifndef __DOCG4_H__ +#define __DOCG4_H__ + +#include <common.h> +#include <linux/mtd/nand.h> + +extern int docg4_nand_init(struct mtd_info *mtd, + struct nand_chip *nand, int devnum); + +/* SPL-related definitions */ +#define DOCG4_IPL_LOAD_BLOCK_COUNT 2 /* number of blocks that IPL loads */ +#define DOCG4_BLOCK_CAPACITY_SPL 0x10000 /* reliable mode; redundant pages */ + +#define DOC_IOSPACE_DATA 0x0800 + +/* register offsets */ +#define DOC_CHIPID 0x1000 +#define DOC_DEVICESELECT 0x100a +#define DOC_ASICMODE 0x100c +#define DOC_DATAEND 0x101e +#define DOC_NOP 0x103e + +#define DOC_FLASHSEQUENCE 0x1032 +#define DOC_FLASHCOMMAND 0x1034 +#define DOC_FLASHADDRESS 0x1036 +#define DOC_FLASHCONTROL 0x1038 +#define DOC_ECCCONF0 0x1040 +#define DOC_ECCCONF1 0x1042 +#define DOC_HAMMINGPARITY 0x1046 +#define DOC_BCH_SYNDROM(idx) (0x1048 + idx) + +#define DOC_ASICMODECONFIRM 0x1072 +#define DOC_CHIPID_INV 0x1074 +#define DOC_POWERMODE 0x107c + +#define DOCG4_MYSTERY_REG 0x1050 + +/* apparently used only to write oob bytes 6 and 7 */ +#define DOCG4_OOB_6_7 0x1052 + +/* DOC_FLASHSEQUENCE register commands */ +#define DOC_SEQ_RESET 0x00 +#define DOCG4_SEQ_PAGE_READ 0x03 +#define DOCG4_SEQ_FLUSH 0x29 +#define DOCG4_SEQ_PAGEWRITE 0x16 +#define DOCG4_SEQ_PAGEPROG 0x1e +#define DOCG4_SEQ_BLOCKERASE 0x24 + +/* DOC_FLASHCOMMAND register commands */ +#define DOCG4_CMD_PAGE_READ 0x00 +#define DOC_CMD_ERASECYCLE2 0xd0 +#define DOCG4_CMD_FLUSH 0x70 +#define DOCG4_CMD_READ2 0x30 +#define DOC_CMD_PROG_BLOCK_ADDR 0x60 +#define DOCG4_CMD_PAGEWRITE 0x80 +#define DOC_CMD_PROG_CYCLE2 0x10 +#define DOC_CMD_RESET 0xff + +/* DOC_POWERMODE register bits */ +#define DOC_POWERDOWN_READY 0x80 + +/* DOC_FLASHCONTROL register bits */ +#define DOC_CTRL_CE 0x10 +#define DOC_CTRL_UNKNOWN 0x40 +#define DOC_CTRL_FLASHREADY 0x01 + +/* DOC_ECCCONF0 register bits */ +#define DOC_ECCCONF0_READ_MODE 0x8000 +#define DOC_ECCCONF0_UNKNOWN 0x2000 +#define DOC_ECCCONF0_ECC_ENABLE 0x1000 +#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff + +/* DOC_ECCCONF1 register bits */ +#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80 +#define DOC_ECCCONF1_ECC_ENABLE 0x07 +#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20 + +/* DOC_ASICMODE register bits */ +#define DOC_ASICMODE_RESET 0x00 +#define DOC_ASICMODE_NORMAL 0x01 +#define DOC_ASICMODE_POWERDOWN 0x02 +#define DOC_ASICMODE_MDWREN 0x04 +#define DOC_ASICMODE_BDETCT_RESET 0x08 +#define DOC_ASICMODE_RSTIN_RESET 0x10 +#define DOC_ASICMODE_RAM_WE 0x20 + +/* good status values read after read/write/erase operations */ +#define DOCG4_PROGSTATUS_GOOD 0x51 +#define DOCG4_PROGSTATUS_GOOD_2 0xe0 + +/* + * On read operations (page and oob-only), the first byte read from I/O reg is a + * status. On error, it reads 0x73; otherwise, it reads either 0x71 (first read + * after reset only) or 0x51, so bit 1 is presumed to be an error indicator. + */ +#define DOCG4_READ_ERROR 0x02 /* bit 1 indicates read error */ + +/* anatomy of the device */ +#define DOCG4_CHIP_SIZE 0x8000000 +#define DOCG4_PAGE_SIZE 0x200 +#define DOCG4_PAGES_PER_BLOCK 0x200 +#define DOCG4_BLOCK_SIZE (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE) +#define DOCG4_NUMBLOCKS (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE) +#define DOCG4_OOB_SIZE 0x10 +#define DOCG4_CHIP_SHIFT 27 /* log_2(DOCG4_CHIP_SIZE) */ +#define DOCG4_PAGE_SHIFT 9 /* log_2(DOCG4_PAGE_SIZE) */ +#define DOCG4_ERASE_SHIFT 18 /* log_2(DOCG4_BLOCK_SIZE) */ + +/* all but the last byte is included in ecc calculation */ +#define DOCG4_BCH_SIZE (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1) + +#define DOCG4_USERDATA_LEN 520 /* 512 byte page plus 8 oob avail to user */ + +/* expected values from the ID registers */ +#define DOCG4_IDREG1_VALUE 0x0400 +#define DOCG4_IDREG2_VALUE 0xfbff + +/* primitive polynomial used to build the Galois field used by hw ecc gen */ +#define DOCG4_PRIMITIVE_POLY 0x4443 + +#define DOCG4_M 14 /* Galois field is of order 2^14 */ +#define DOCG4_T 4 /* BCH alg corrects up to 4 bit errors */ + +#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */ + +#endif /* __DOCG4_H__ */ diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 141c960..6f44abd 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -9,7 +9,8 @@ #include <linux/types.h> #include <div64.h> -#include <linux/mtd/mtd-abi.h> +#include <mtd/mtd-abi.h> +#include <asm/errno.h> #define MTD_CHAR_MAJOR 90 #define MTD_BLOCK_MAJOR 31 @@ -65,22 +66,6 @@ struct mtd_erase_region_info { unsigned long *lockmap; /* If keeping bitmap of locks */ }; -/* - * oob operation modes - * - * MTD_OOB_PLACE: oob data are placed at the given offset - * MTD_OOB_AUTO: oob data are automatically placed at the free areas - * which are defined by the ecclayout - * MTD_OOB_RAW: mode to read raw data+oob in one chunk. The oob data - * is inserted into the data. Thats a raw image of the - * flash contents. - */ -typedef enum { - MTD_OOB_PLACE, - MTD_OOB_AUTO, - MTD_OOB_RAW, -} mtd_oob_mode_t; - /** * struct mtd_oob_ops - oob operation operands * @mode: operation mode @@ -92,7 +77,7 @@ typedef enum { * @ooblen: number of oob bytes to write/read * @oobretlen: number of oob bytes written/read * @ooboffs: offset of oob data in the oob area (only relevant when - * mode = MTD_OOB_PLACE) + * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW) * @datbuf: data buffer - if NULL only oob data are read/written * @oobbuf: oob data buffer * @@ -101,7 +86,7 @@ typedef enum { * OOB area. */ struct mtd_oob_ops { - mtd_oob_mode_t mode; + unsigned int mode; size_t len; size_t retlen; size_t ooblen; @@ -133,13 +118,25 @@ struct mtd_info { u_int32_t oobsize; /* Amount of OOB data per block (e.g. 16) */ u_int32_t oobavail; /* Available OOB bytes per block */ + /* + * read ops return -EUCLEAN if max number of bitflips corrected on any + * one region comprising an ecc step equals or exceeds this value. + * Settable by driver, else defaults to ecc_strength. User can override + * in sysfs. N.B. The meaning of the -EUCLEAN return code has changed; + * see Documentation/ABI/testing/sysfs-class-mtd for more detail. + */ + unsigned int bitflip_threshold; + /* Kernel-only stuff starts here. */ const char *name; int index; - /* ecc layout structure pointer - read only ! */ + /* ECC layout structure pointer - read only! */ struct nand_ecclayout *ecclayout; + /* max number of correctible bit errors per ecc step */ + unsigned int ecc_strength; + /* Data for variable erase regions. If numeraseregions is zero, * it means that the whole device has erasesize as given above. */ @@ -147,25 +144,17 @@ struct mtd_info { struct mtd_erase_region_info *eraseregions; /* - * Erase is an asynchronous operation. Device drivers are supposed - * to call instr->callback() whenever the operation completes, even - * if it completes with a failure. - * Callers are supposed to pass a callback function and wait for it - * to be called before writing to the block. + * Do not call via these pointers, use corresponding mtd_*() + * wrappers instead. */ - int (*erase) (struct mtd_info *mtd, struct erase_info *instr); - - /* This stuff for eXecute-In-Place */ - /* phys is optional and may be set to NULL */ - int (*point) (struct mtd_info *mtd, loff_t from, size_t len, + int (*_erase) (struct mtd_info *mtd, struct erase_info *instr); + int (*_point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, phys_addr_t *phys); - - /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ - void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len); - - - int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + void (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len); + int (*_read) (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); + int (*_write) (struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf); /* In blackbox flight recorder like scenarios we want to make successful writes in interrupt context. panic_write() is only intended to be @@ -174,24 +163,35 @@ struct mtd_info { longer, this function can break locks and delay to ensure the write succeeds (but not sleep). */ - int (*panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); - int (*read_oob) (struct mtd_info *mtd, loff_t from, + int (*_read_oob) (struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); - int (*write_oob) (struct mtd_info *mtd, loff_t to, + int (*_write_oob) (struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops); - + int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, + size_t len); + int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf); + int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, + size_t len); + int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf); + int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf); + int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len); + void (*_sync) (struct mtd_info *mtd); + int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs); + int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs); /* - * Methods to access the protection register area, present in some - * flash devices. The user data is one time programmable but the - * factory data is read only. + * If the driver is something smart, like UBI, it may need to maintain + * its own reference counting. The below functions are only for driver. */ - int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); - int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); - int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len); + int (*_get_device) (struct mtd_info *mtd); + void (*_put_device) (struct mtd_info *mtd); /* XXX U-BOOT XXX */ #if 0 @@ -201,18 +201,6 @@ struct mtd_info { */ int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); #endif - - /* Sync */ - void (*sync) (struct mtd_info *mtd); - - /* Chip-supported device locking */ - int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - - /* Bad block management functions */ - int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); - int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); - /* XXX U-BOOT XXX */ #if 0 struct notifier_block reboot_notifier; /* default mode before reboot */ @@ -227,15 +215,59 @@ struct mtd_info { struct module *owner; int usecount; - - /* If the driver is something smart, like UBI, it may need to maintain - * its own reference counting. The below functions are only for driver. - * The driver may register its callbacks. These callbacks are not - * supposed to be called by MTD users */ - int (*get_device) (struct mtd_info *mtd); - void (*put_device) (struct mtd_info *mtd); }; +int mtd_erase(struct mtd_info *mtd, struct erase_info *instr); +int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + u_char *buf); +int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf); +int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf); + +int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); + +static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + ops->retlen = ops->oobretlen = 0; + if (!mtd->_write_oob) + return -EOPNOTSUPP; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + return mtd->_write_oob(mtd, to, ops); +} + +int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len); +int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len); +int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf); +int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len); + +/* XXX U-BOOT XXX */ +#if 0 +int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen); +#endif + +static inline void mtd_sync(struct mtd_info *mtd) +{ + if (mtd->_sync) + mtd->_sync(mtd); +} + +int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs); +int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs); + static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd) { do_div(sz, mtd->erasesize); @@ -247,6 +279,16 @@ static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd) return do_div(sz, mtd->erasesize); } +static inline int mtd_has_oob(const struct mtd_info *mtd) +{ + return mtd->_read_oob && mtd->_write_oob; +} + +static inline int mtd_can_have_bb(const struct mtd_info *mtd) +{ + return !!mtd->_block_isbad; +} + /* Kernel-side ioctl definitions */ extern int add_mtd_device(struct mtd_info *mtd); @@ -269,12 +311,6 @@ struct mtd_notifier { extern void register_mtd_user (struct mtd_notifier *new); extern int unregister_mtd_user (struct mtd_notifier *old); - -int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen); - -int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, - unsigned long count, loff_t from, size_t *retlen); #endif #ifdef CONFIG_MTD_PARTITIONS @@ -296,17 +332,34 @@ static inline void mtd_erase_callback(struct erase_info *instr) #define MTD_DEBUG_LEVEL3 (3) /* Noisy */ #ifdef CONFIG_MTD_DEBUG +#define pr_debug(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args) #define MTDDEBUG(n, args...) \ do { \ if (n <= CONFIG_MTD_DEBUG_VERBOSE) \ printk(KERN_INFO args); \ } while(0) #else /* CONFIG_MTD_DEBUG */ +#define pr_debug(args...) #define MTDDEBUG(n, args...) \ do { \ if (0) \ printk(KERN_INFO args); \ } while(0) #endif /* CONFIG_MTD_DEBUG */ +#define pr_info(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args) +#define pr_warn(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args) +#define pr_err(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args) + +static inline int mtd_is_bitflip(int err) { + return err == -EUCLEAN; +} + +static inline int mtd_is_eccerr(int err) { + return err == -EBADMSG; +} + +static inline int mtd_is_bitflip_or_eccerr(int err) { + return mtd_is_bitflip(err) || mtd_is_eccerr(err); +} #endif /* __MTD_MTD_H__ */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 98bf255..2055584 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -46,7 +46,7 @@ extern void nand_wait_ready(struct mtd_info *mtd); * is supported now. If you add a chip with bigger oobsize/page * adjust this accordingly. */ -#define NAND_MAX_OOBSIZE 576 +#define NAND_MAX_OOBSIZE 640 #define NAND_MAX_PAGESIZE 8192 /* @@ -82,6 +82,8 @@ extern void nand_wait_ready(struct mtd_info *mtd); #define NAND_CMD_READID 0x90 #define NAND_CMD_ERASE2 0xd0 #define NAND_CMD_PARAM 0xec +#define NAND_CMD_GET_FEATURES 0xee +#define NAND_CMD_SET_FEATURES 0xef #define NAND_CMD_RESET 0xff #define NAND_CMD_LOCK 0x2a @@ -142,7 +144,7 @@ typedef enum { #define NAND_ECC_READ 0 /* Reset Hardware ECC for write */ #define NAND_ECC_WRITE 1 -/* Enable Hardware ECC before syndrom is read back from flash */ +/* Enable Hardware ECC before syndrome is read back from flash */ #define NAND_ECC_READSYN 2 /* Bit mask for flags passed to do_nand_read_ecc */ @@ -153,9 +155,7 @@ typedef enum { * Option constants for bizarre disfunctionality and real * features. */ -/* Chip can not auto increment pages */ -#define NAND_NO_AUTOINCR 0x00000001 -/* Buswitdh is 16 bit */ +/* Buswidth is 16 bit */ #define NAND_BUSWIDTH_16 0x00000002 /* Device supports partial programming without padding */ #define NAND_NO_PADDING 0x00000004 @@ -179,12 +179,6 @@ typedef enum { * This happens with the Renesas AG-AND chips, possibly others. */ #define BBT_AUTO_REFRESH 0x00000080 -/* - * Chip does not require ready check on read. true - * for all large page devices, as they do not support - * autoincrement. - */ -#define NAND_NO_READRDY 0x00000100 /* Chip does not allow subpage writes */ #define NAND_NO_SUBPAGE_WRITE 0x00000200 @@ -202,34 +196,21 @@ typedef enum { (NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK) /* Macros to identify the above */ -#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR)) #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) #define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ)) /* Non chip related options */ -/* - * Use a flash based bad block table. OOB identifier is saved in OOB area. - * This option is passed to the default bad block table function. - */ -#define NAND_USE_FLASH_BBT 0x00010000 /* This option skips the bbt scan during initialization. */ -#define NAND_SKIP_BBTSCAN 0x00020000 +#define NAND_SKIP_BBTSCAN 0x00010000 /* * This option is defined if the board driver allocates its own buffers * (e.g. because it needs them DMA-coherent). */ -#define NAND_OWN_BUFFERS 0x00040000 +#define NAND_OWN_BUFFERS 0x00020000 /* Chip may not exist, so silence any errors in scan */ -#define NAND_SCAN_SILENT_NODEV 0x00080000 -/* - * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch - * the OOB area. - */ -#define NAND_USE_FLASH_BBT_NO_OOB 0x00800000 -/* Create an empty BBT with no vendor information if the BBT is available */ -#define NAND_CREATE_EMPTY_BBT 0x01000000 +#define NAND_SCAN_SILENT_NODEV 0x00040000 /* Options set by nand scan */ /* bbt has already been read */ @@ -244,6 +225,21 @@ typedef enum { /* Keep gcc happy */ struct nand_chip; +/* ONFI timing mode, used in both asynchronous and synchronous mode */ +#define ONFI_TIMING_MODE_0 (1 << 0) +#define ONFI_TIMING_MODE_1 (1 << 1) +#define ONFI_TIMING_MODE_2 (1 << 2) +#define ONFI_TIMING_MODE_3 (1 << 3) +#define ONFI_TIMING_MODE_4 (1 << 4) +#define ONFI_TIMING_MODE_5 (1 << 5) +#define ONFI_TIMING_MODE_UNKNOWN (1 << 6) + +/* ONFI feature address */ +#define ONFI_FEATURE_ADDR_TIMING_MODE 0x1 + +/* ONFI subfeature parameters length */ +#define ONFI_SUBFEATURE_PARAM_LEN 4 + struct nand_onfi_params { /* rev info and features block */ /* 'O' 'N' 'F' 'I' */ @@ -326,27 +322,32 @@ struct nand_hw_control { }; /** - * struct nand_ecc_ctrl - Control structure for ecc - * @mode: ecc mode - * @steps: number of ecc steps per page - * @size: data bytes per ecc step - * @bytes: ecc bytes per step - * @total: total number of ecc bytes per page - * @prepad: padding information for syndrome based ecc generators - * @postpad: padding information for syndrome based ecc generators + * struct nand_ecc_ctrl - Control structure for ECC + * @mode: ECC mode + * @steps: number of ECC steps per page + * @size: data bytes per ECC step + * @bytes: ECC bytes per step + * @strength: max number of correctible bits per ECC step + * @total: total number of ECC bytes per page + * @prepad: padding information for syndrome based ECC generators + * @postpad: padding information for syndrome based ECC generators * @layout: ECC layout control struct pointer - * @priv: pointer to private ecc control data - * @hwctl: function to control hardware ecc generator. Must only + * @priv: pointer to private ECC control data + * @hwctl: function to control hardware ECC generator. Must only * be provided if an hardware ECC is available - * @calculate: function for ecc calculation or readback from ecc hardware - * @correct: function for ecc correction, matching to ecc generator (sw/hw) + * @calculate: function for ECC calculation or readback from ECC hardware + * @correct: function for ECC correction, matching to ECC generator (sw/hw) * @read_page_raw: function to read a raw page without ECC * @write_page_raw: function to write a raw page without ECC - * @read_page: function to read a page according to the ecc generator - * requirements. - * @read_subpage: function to read parts of the page covered by ECC. - * @write_page: function to write a page according to the ecc generator + * @read_page: function to read a page according to the ECC generator + * requirements; returns maximum number of bitflips corrected in + * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error + * @read_subpage: function to read parts of the page covered by ECC; + * returns same as read_page() + * @write_page: function to write a page according to the ECC generator * requirements. + * @write_oob_raw: function to write chip OOB data without ECC + * @read_oob_raw: function to read chip OOB data without ECC * @read_oob: function to read chip OOB data * @write_oob: function to write chip OOB data */ @@ -356,6 +357,7 @@ struct nand_ecc_ctrl { int size; int bytes; int total; + int strength; int prepad; int postpad; struct nand_ecclayout *layout; @@ -366,25 +368,28 @@ struct nand_ecc_ctrl { int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc); int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page); - void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf); + uint8_t *buf, int oob_required, int page); + int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required); int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int page); + uint8_t *buf, int oob_required, int page); int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip, uint32_t offs, uint32_t len, uint8_t *buf); - void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf); - int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page, - int sndcmd); + int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required); + int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip, + int page); + int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip, + int page); + int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page); int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page); }; /** * struct nand_buffers - buffer structure for read/write - * @ecccalc: buffer for calculated ecc - * @ecccode: buffer for ecc read from flash + * @ecccalc: buffer for calculated ECC + * @ecccode: buffer for ECC read from flash * @databuf: buffer for data - dynamically sized * * Do not change the order of buffers. databuf and oobrbuf must be in @@ -418,7 +423,7 @@ struct nand_buffers { * mtd->oobsize, mtd->writesize and so on. * @id_data contains the 8 bytes values of NAND_CMD_READID. * Return with the bus width. - * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing + * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing * device ready/busy line. If set to NULL no access to * ready/busy is available and the ready/busy information * is read from the chip status register. @@ -426,17 +431,17 @@ struct nand_buffers { * commands to the chip. * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on * ready. - * @ecc: [BOARDSPECIFIC] ecc control ctructure + * @ecc: [BOARDSPECIFIC] ECC control structure * @buffers: buffer structure for read/write * @hwcontrol: platform-specific hardware control structure - * @ops: oob operation operands * @erase_cmd: [INTERN] erase command write function, selectable due * to AND support. * @scan_bbt: [REPLACEABLE] function to scan bad block table * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring * data from array to read regs (tR). * @state: [INTERN] the current state of the NAND device - * @oob_poi: poison value buffer + * @oob_poi: "poison value buffer," used for laying out OOB data + * before writing * @page_shift: [INTERN] number of address bits in a page (column * address bits). * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock @@ -445,10 +450,14 @@ struct nand_buffers { * @options: [BOARDSPECIFIC] various chip options. They can partly * be set to inform nand_scan about special functionality. * See the defines for further explanation. + * @bbt_options: [INTERN] bad block specific options. All options used + * here must come from bbm.h. By default, these options + * will be copied to the appropriate nand_bbt_descr's. * @badblockpos: [INTERN] position of the bad block marker in the oob * area. - * @badblockbits: [INTERN] number of bits to left-shift the bad block - * number + * @badblockbits: [INTERN] minimum number of set bits in a good block's + * bad block marker position; i.e., BBM == 11110111b is + * not bad when badblockbits == 7 * @cellinfo: [INTERN] MLC/multichip data from chip ident * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays @@ -460,7 +469,9 @@ struct nand_buffers { * non 0 if ONFI supported. * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is * supported, 0 otherwise. - * @ecclayout: [REPLACEABLE] the default ecc placement scheme + * @onfi_set_features [REPLACEABLE] set the features for ONFI nand + * @onfi_get_features [REPLACEABLE] get the features for ONFI nand + * @ecclayout: [REPLACEABLE] the default ECC placement scheme * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash * lookup. @@ -468,9 +479,9 @@ struct nand_buffers { * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial * bad block scan. * @controller: [REPLACEABLE] a pointer to a hardware controller - * structure which is shared among multiple independend + * structure which is shared among multiple independent * devices. - * @priv: [OPTIONAL] pointer to private chip date + * @priv: [OPTIONAL] pointer to private chip data * @errstat: [OPTIONAL] hardware specific function to perform * additional error status checks (determine if errors are * correctable). @@ -501,10 +512,16 @@ struct nand_chip { int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int page, int cached, int raw); + const uint8_t *buf, int oob_required, int page, + int cached, int raw); + int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); + int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); int chip_delay; unsigned int options; + unsigned int bbt_options; int page_shift; int phys_erase_shift; @@ -534,8 +551,6 @@ struct nand_chip { struct nand_buffers *buffers; struct nand_hw_control hwcontrol; - struct mtd_oob_ops ops; - uint8_t *bbt; struct nand_bbt_descr *bbt_td; struct nand_bbt_descr *bbt_md; @@ -557,6 +572,8 @@ struct nand_chip { #define NAND_MFR_HYNIX 0xad #define NAND_MFR_MICRON 0x2c #define NAND_MFR_AMD 0x01 +#define NAND_MFR_MACRONIX 0xc2 +#define NAND_MFR_EON 0x92 /** * struct nand_flash_dev - NAND Flash Device ID Structure @@ -615,9 +632,9 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, * @partitions: mtd partition list * @chip_delay: R/B delay value in us * @options: Option flags, e.g. 16bit buswidth - * @ecclayout: ecc layout info structure + * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH + * @ecclayout: ECC layout info structure * @part_probe_types: NULL-terminated array of probe types - * @priv: hardware controller specific settings */ struct platform_nand_chip { int nr_chips; @@ -627,8 +644,8 @@ struct platform_nand_chip { struct nand_ecclayout *ecclayout; int chip_delay; unsigned int options; + unsigned int bbt_options; const char **part_probe_types; - void *priv; }; /* Keep gcc happy */ @@ -650,6 +667,7 @@ struct platform_nand_ctrl { int (*dev_ready)(struct mtd_info *mtd); void (*select_chip)(struct mtd_info *mtd, int chip); void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); + unsigned char (*read_byte)(struct mtd_info *mtd); void *priv; }; @@ -679,4 +697,23 @@ void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len); void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len); uint8_t nand_read_byte(struct mtd_info *mtd); +/* return the supported asynchronous timing mode. */ + +#ifdef CONFIG_SYS_NAND_ONFI_DETECTION +static inline int onfi_get_async_timing_mode(struct nand_chip *chip) +{ + if (!chip->onfi_version) + return ONFI_TIMING_MODE_UNKNOWN; + return le16_to_cpu(chip->onfi_params.async_timing_mode); +} + +/* return the supported synchronous timing mode. */ +static inline int onfi_get_sync_timing_mode(struct nand_chip *chip) +{ + if (!chip->onfi_version) + return ONFI_TIMING_MODE_UNKNOWN; + return le16_to_cpu(chip->onfi_params.src_sync_timing_mode); +} +#endif + #endif /* __LINUX_MTD_NAND_H */ diff --git a/include/linux/string.h b/include/linux/string.h index e9b134d..8e44855 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -85,6 +85,9 @@ extern int memcmp(const void *,const void *,__kernel_size_t); #ifndef __HAVE_ARCH_MEMCHR extern void * memchr(const void *,int,__kernel_size_t); #endif +#ifndef __HAVE_ARCH_MEMCHR_INV +void *memchr_inv(const void *, int, size_t); +#endif #ifdef __cplusplus } diff --git a/include/lmb.h b/include/lmb.h index 5d1f4b6..43082a3 100644 --- a/include/lmb.h +++ b/include/lmb.h @@ -1,7 +1,6 @@ #ifndef _LINUX_LMB_H #define _LINUX_LMB_H #ifdef __KERNEL__ -#ifdef CONFIG_LMB #include <asm/types.h> /* @@ -57,7 +56,6 @@ lmb_size_bytes(struct lmb_region *type, unsigned long region_nr) void board_lmb_reserve(struct lmb *lmb); void arch_lmb_reserve(struct lmb *lmb); -#endif /* CONFIG_LMB */ #endif /* __KERNEL__ */ #endif /* _LINUX_LMB_H */ diff --git a/include/mmc.h b/include/mmc.h index 8bbc6b6..566db59 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -68,6 +68,7 @@ #define UNUSABLE_ERR -17 /* Unusable Card */ #define COMM_ERR -18 /* Communications Error */ #define TIMEOUT -19 +#define IN_PROGRESS -20 /* operation is in progress */ #define MMC_CMD_GO_IDLE_STATE 0 #define MMC_CMD_SEND_OP_COND 1 @@ -270,6 +271,10 @@ struct mmc { int (*getcd)(struct mmc *mmc); int (*getwp)(struct mmc *mmc); uint b_max; + char op_cond_pending; /* 1 if we are waiting on an op_cond command */ + char init_in_progress; /* 1 if we have done mmc_start_init() */ + char preinit; /* start init as early as possible */ + uint op_cond_response; /* the response byte from the last op_cond */ }; int mmc_register(struct mmc *mmc); @@ -287,6 +292,31 @@ int mmc_getcd(struct mmc *mmc); int mmc_getwp(struct mmc *mmc); void spl_mmc_load(void) __noreturn; +/** + * Start device initialization and return immediately; it does not block on + * polling OCR (operation condition register) status. Then you should call + * mmc_init, which would block on polling OCR status and complete the device + * initializatin. + * + * @param mmc Pointer to a MMC device struct + * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error. + */ +int mmc_start_init(struct mmc *mmc); + +/** + * Set preinit flag of mmc device. + * + * This will cause the device to be pre-inited during mmc_initialize(), + * which may save boot time if the device is not accessed until later. + * Some eMMC devices take 200-300ms to init, but unfortunately they + * must be sent a series of commands to even get them to start preparing + * for operation. + * + * @param mmc Pointer to a MMC device struct + * @param preinit preinit flag value + */ +void mmc_set_preinit(struct mmc *mmc, int preinit); + #ifdef CONFIG_GENERIC_MMC #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI) struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); diff --git a/include/mpc8220.h b/include/mpc8220.h deleted file mode 100644 index c4900a0..0000000 --- a/include/mpc8220.h +++ /dev/null @@ -1,717 +0,0 @@ -/* - * include/mpc8220.h - * - * Prototypes, etc. for the Motorola MPC8220 - * embedded cpu chips - * - * 2004 (c) Freescale, Inc. - * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef __MPC8220_H__ -#define __MPC8220_H__ - -/* Processor name */ -#if defined(CONFIG_MPC8220) -#define CPU_ID_STR "MPC8220" -#endif - -/* Exception offsets (PowerPC standard) */ -#define EXC_OFF_SYS_RESET 0x0100 -#define _START_OFFSET EXC_OFF_SYS_RESET - -/* Internal memory map */ -/* MPC8220 Internal Register MMAP */ -#define MMAP_MBAR (CONFIG_SYS_MBAR + 0x00000000) /* chip selects */ -#define MMAP_MEMCTL (CONFIG_SYS_MBAR + 0x00000100) /* sdram controller */ -#define MMAP_XLBARB (CONFIG_SYS_MBAR + 0x00000200) /* xlb arbitration control */ -#define MMAP_CDM (CONFIG_SYS_MBAR + 0x00000300) /* clock distribution module */ -#define MMAP_VDOPLL (CONFIG_SYS_MBAR + 0x00000400) /* video PLL */ -#define MMAP_FB (CONFIG_SYS_MBAR + 0x00000500) /* flex bus controller */ -#define MMAP_PCFG (CONFIG_SYS_MBAR + 0x00000600) /* port config */ -#define MMAP_ICTL (CONFIG_SYS_MBAR + 0x00000700) /* interrupt controller */ -#define MMAP_GPTMR (CONFIG_SYS_MBAR + 0x00000800) /* general purpose timers */ -#define MMAP_SLTMR (CONFIG_SYS_MBAR + 0x00000900) /* slice timers */ -#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00000A00) /* gpio module */ -#define MMAP_XCPCI (CONFIG_SYS_MBAR + 0x00000B00) /* pci controller */ -#define MMAP_PCIARB (CONFIG_SYS_MBAR + 0x00000C00) /* pci arbiter */ -#define MMAP_EXTDMA1 (CONFIG_SYS_MBAR + 0x00000D00) /* external dma1 */ -#define MMAP_EXTDMA2 (CONFIG_SYS_MBAR + 0x00000E00) /* external dma1 */ -#define MMAP_USBH (CONFIG_SYS_MBAR + 0x00001000) /* usb host */ -#define MMAP_CMTMR (CONFIG_SYS_MBAR + 0x00007f00) /* comm timers */ -#define MMAP_DMA (CONFIG_SYS_MBAR + 0x00008000) /* dma */ -#define MMAP_USBD (CONFIG_SYS_MBAR + 0x00008200) /* usb device */ -#define MMAP_COMMPCI (CONFIG_SYS_MBAR + 0x00008400) /* pci comm Bus regs */ -#define MMAP_1284 (CONFIG_SYS_MBAR + 0x00008500) /* 1284 */ -#define MMAP_PEV (CONFIG_SYS_MBAR + 0x00008600) /* print engine video */ -#define MMAP_PSC1 (CONFIG_SYS_MBAR + 0x00008800) /* psc1 block */ -#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00008f00) /* i2c controller */ -#define MMAP_FEC1 (CONFIG_SYS_MBAR + 0x00009000) /* fast ethernet 1 */ -#define MMAP_FEC2 (CONFIG_SYS_MBAR + 0x00009800) /* fast ethernet 2 */ -#define MMAP_JBIGRAM (CONFIG_SYS_MBAR + 0x0000a000) /* jbig RAM */ -#define MMAP_JBIG (CONFIG_SYS_MBAR + 0x0000c000) /* jbig */ -#define MMAP_PDLA (CONFIG_SYS_MBAR + 0x00010000) /* */ -#define MMAP_SRAMCFG (CONFIG_SYS_MBAR + 0x0001ff00) /* SRAM config */ -#define MMAP_SRAM (CONFIG_SYS_MBAR + 0x00020000) /* SRAM */ - -#define SRAM_SIZE 0x8000 /* 32 KB */ - -/* ------------------------------------------------------------------------ */ -/* - * Macro for Programmable Serial Channel - */ -/* equates for mode reg. 1 for channel A or B */ -#define PSC_MR1_RX_RTS 0x80000000 /* receiver RTS enabled */ -#define PSC_MR1_RX_INT 0x40000000 /* receiver intrupt enabled */ -#define PSC_MR1_ERR_MODE 0x20000000 /* block error mode */ -#define PSC_MR1_PAR_MODE_MULTI 0x18000000 /* multi_drop mode */ -#define PSC_MR1_NO_PARITY 0x10000000 /* no parity mode */ -#define PSC_MR1_ALWAYS_0 0x08000000 /* force parity mode */ -#define PSC_MR1_ALWAYS_1 0x0c000000 /* force parity mode */ -#define PSC_MR1_EVEN_PARITY 0x00000000 /* parity mode */ -#define PSC_MR1_ODD_PARITY 0x04000000 /* 0 = even, 1 = odd */ -#define PSC_MR1_BITS_CHAR_8 0x03000000 /* 8 bits */ -#define PSC_MR1_BITS_CHAR_7 0x02000000 /* 7 bits */ -#define PSC_MR1_BITS_CHAR_6 0x01000000 /* 6 bits */ -#define PSC_MR1_BITS_CHAR_5 0x00000000 /* 5 bits */ - -/* equates for mode reg. 2 for channel A or B */ -#define PSC_MR2_NORMAL_MODE 0x00000000 /* normal channel mode */ -#define PSC_MR2_AUTO_MODE 0x40000000 /* automatic channel mode */ -#define PSC_MR2_LOOPBACK_LOCL 0x80000000 /* local loopback channel mode */ -#define PSC_MR2_LOOPBACK_REMT 0xc0000000 /* remote loopback channel mode */ -#define PSC_MR2_TX_RTS 0x20000000 /* transmitter RTS enabled */ -#define PSC_MR2_TX_CTS 0x10000000 /* transmitter CTS enabled */ -#define PSC_MR2_STOP_BITS_2 0x0f000000 /* 2 stop bits */ -#define PSC_MR2_STOP_BITS_1 0x07000000 /* 1 stop bit */ - -/* equates for status reg. A or B */ -#define PSC_SR_BREAK 0x80000000 /* received break */ -#define PSC_SR_NEOF PSC_SR_BREAK /* Next byte is EOF - MIR/FIR */ -#define PSC_SR_FRAMING 0x40000000 /* framing error */ -#define PSC_SR_PHYERR PSC_SR_FRAMING/* Physical Layer error - MIR/FIR */ -#define PSC_SR_PARITY 0x20000000 /* parity error */ -#define PSC_SR_CRCERR PSC_SR_PARITY /* CRC error */ -#define PSC_SR_OVERRUN 0x10000000 /* overrun error */ -#define PSC_SR_TXEMT 0x08000000 /* transmitter empty */ -#define PSC_SR_TXRDY 0x04000000 /* transmitter ready*/ -#define PSC_SR_FFULL 0x02000000 /* fifo full */ -#define PSC_SR_RXRDY 0x01000000 /* receiver ready */ -#define PSC_SR_DEOF 0x00800000 /* Detect EOF or RX-FIFO contain EOF */ -#define PSC_SR_ERR 0x00400000 /* Error Status including FIFO */ - -/* equates for clock select reg. */ -#define PSC_CSRX16EXT_CLK 0x1110 /* x 16 ext_clock */ -#define PSC_CSRX1EXT_CLK 0x1111 /* x 1 ext_clock */ - -/* equates for command reg. A or B */ -#define PSC_CR_NO_COMMAND 0x00000000 /* no command */ -#define PSC_CR_RST_MR_PTR_CMD 0x10000000 /* reset mr pointer command */ -#define PSC_CR_RST_RX_CMD 0x20000000 /* reset receiver command */ -#define PSC_CR_RST_TX_CMD 0x30000000 /* reset transmitter command */ -#define PSC_CR_RST_ERR_STS_CMD 0x40000000 /* reset error status cmnd */ -#define PSC_CR_RST_BRK_INT_CMD 0x50000000 /* reset break int. command */ -#define PSC_CR_STR_BREAK_CMD 0x60000000 /* start break command */ -#define PSC_CR_STP_BREAK_CMD 0x70000000 /* stop break command */ -#define PSC_CR_RX_ENABLE 0x01000000 /* receiver enabled */ -#define PSC_CR_RX_DISABLE 0x02000000 /* receiver disabled */ -#define PSC_CR_TX_ENABLE 0x04000000 /* transmitter enabled */ -#define PSC_CR_TX_DISABLE 0x08000000 /* transmitter disabled */ - -/* equates for input port change reg. */ -#define PSC_IPCR_SYNC 0x80000000 /* Sync Detect */ -#define PSC_IPCR_D_CTS 0x10000000 /* Delta CTS */ -#define PSC_IPCR_CTS 0x01000000 /* CTS - current state of PSC_CTS */ - -/* equates for auxiliary control reg. (timer and counter clock selects) */ -#define PSC_ACR_BRG 0x80000000 /* for 68681 compatibility - baud rate gen select - 0 = set 1; 1 = set 2 - equates are set 2 ONLY */ -#define PSC_ACR_TMR_EXT_CLK_16 0x70000000 /* xtnl clock divided by 16 */ -#define PSC_ACR_TMR_EXT_CLK 0x60000000 /* external clock */ -#define PSC_ACR_TMR_IP2_16 0x50000000 /* ip2 divided by 16 */ -#define PSC_ACR_TMR_IP2 0x40000000 /* ip2 */ -#define PSC_ACR_CTR_EXT_CLK_16 0x30000000 /* xtnl clock divided by 16 */ -#define PSC_ACR_CTR_TXCB 0x20000000 /* channel B xmitr clock */ -#define PSC_ACR_CTR_TXCA 0x10000000 /* channel A xmitr clock */ -#define PSC_ACR_CTR_IP2 0x00000000 /* ip2 */ -#define PSC_ACR_IEC0 0x01000000 /* interrupt enable ctrl for D_CTS */ - -/* equates for int. status reg. */ -#define PSC_ISR_IPC 0x80000000 /* input port change*/ -#define PSC_ISR_BREAK 0x04000000 /* delta break */ -#define PSC_ISR_RX_RDY 0x02000000 /* receiver rdy /fifo full */ -#define PSC_ISR_TX_RDY 0x01000000 /* transmitter ready */ -#define PSC_ISR_DEOF 0x00800000 /* Detect EOF / RX-FIFO contains EOF */ -#define PSC_ISR_ERR 0x00400000 /* Error Status including FIFO */ - -/* equates for int. mask reg. */ -#define PSC_IMR_CLEAR 0xff000000 /* Clear the imr */ -#define PSC_IMR_IPC 0x80000000 /* input port change*/ -#define PSC_IMR_BREAK 0x04000000 /* delta break */ -#define PSC_IMR_RX_RDY 0x02000000 /* rcvr ready / fifo full */ -#define PSC_IMR_TX_RDY 0x01000000 /* transmitter ready */ -#define PSC_IMR_DEOF 0x00800000 /* Detect EOF / RX-FIFO contains EOF */ -#define PSC_IMR_ERR 0x00400000 /* Error Status including FIFO */ - -/* equates for input port reg. */ -#define PSC_IP_LPWRB 0x80000000 /* Low power mode in Ac97 */ -#define PSC_IP_TGL 0x40000000 /* test usage */ -#define PSC_IP_CTS 0x01000000 /* CTS */ - -/* equates for output port bit set reg. */ -#define PSC_OPSET_RTS 0x01000000 /* Assert PSC_RTS output */ - -/* equates for output port bit reset reg. */ -#define PSC_OPRESET_RTS 0x01000000 /* Assert PSC_RTS output */ - -/* equates for rx FIFO number of data reg. */ -#define PSC_RFNUM(x) ((x&0xff)<<24)/* receive count */ - -/* equates for tx FIFO number of data reg. */ -#define PSC_TFNUM(x) ((x&0xff)<<24)/* receive count */ - -/* equates for rx FIFO status reg */ -#define PSC_RFSTAT_TAG(x) ((x&3)<<28) /* tag */ -#define PSC_RFSTAT_FRAME0 0x08 /* Frame Indicator 0 */ -#define PSC_RFSTAT_FRAME1 0x04 /* Frame Indicator 1 */ -#define PSC_RFSTAT_FRAME2 0x02 /* Frame Indicator 2 */ -#define PSC_RFSTAT_FRAME3 0x01 /* Frame Indicator 3 */ -#define PSC_RFSTAT_FRAME(x) ((x&0x0f)<<24)/* Frame indicator */ -#define PSC_RFSTAT_ERR 0x00400000 /* Fifo err */ -#define PSC_RFSTAT_UF 0x00200000 /* Underflow */ -#define PSC_RFSTAT_OF 0x00100000 /* overflow */ -#define PSC_RFSTAT_FR 0x00080000 /* frame ready */ -#define PSC_RFSTAT_FULL 0x00040000 /* full */ -#define PSC_RFSTAT_ALARM 0x00020000 /* alarm */ -#define PSC_RFSTAT_EMPTY 0x00010000 /* empty */ - -/* equates for tx FIFO status reg */ -#define PSC_TFSTAT_TAG(x) ((x&3)<<28) /* tag */ -#define PSC_TFSTAT_FRAME0 0x08 /* Frame Indicator 0 */ -#define PSC_TFSTAT_FRAME1 0x04 /* Frame Indicator 1 */ -#define PSC_TFSTAT_FRAME2 0x02 /* Frame Indicator 2 */ -#define PSC_TFSTAT_FRAME3 0x01 /* Frame Indicator 3 */ -#define PSC_TFSTAT_FRAME(x) ((x&0x0f)<<24)/* Frame indicator */ -#define PSC_TFSTAT_ERR 0x00400000 /* Fifo err */ -#define PSC_TFSTAT_UF 0x00200000 /* Underflow */ -#define PSC_TFSTAT_OF 0x00100000 /* overflow */ -#define PSC_TFSTAT_FR 0x00080000 /* frame ready */ -#define PSC_TFSTAT_FULL 0x00040000 /* full */ -#define PSC_TFSTAT_ALARM 0x00020000 /* alarm */ -#define PSC_TFSTAT_EMPTY 0x00010000 /* empty */ - -/* equates for rx FIFO control reg. */ -#define PSC_RFCNTL_WTAG(x) ((x&3)<<29) /* Write tag */ -#define PSC_RFCNTL_FRAME 0x08000000 /* Frame mode enable */ -#define PSC_RFCNTL_GR(x) ((x&7)<<24) /* Granularity */ - -/* equates for tx FIFO control reg. */ -#define PSC_TFCNTL_WTAG(x) ((x&3)<<29) /* Write tag */ -#define PSC_TFCNTL_FRAME 0x08000000 /* Frame mode enable */ -#define PSC_TFCNTL_GR(x) ((x&7)<<24) /* Granularity */ - -/* equates for rx FIFO alarm reg */ -#define PSC_RFALARM(x) (x&0x1ff) /* Alarm */ - -/* equates for tx FIFO alarm reg */ -#define PSC_TFALARM(x) (x&0x1ff) /* Alarm */ - -/* equates for rx FIFO read pointer */ -#define PSC_RFRPTR(x) (x&0x1ff) /* read pointer */ - -/* equates for tx FIFO read pointer */ -#define PSC_TFRPTR(x) (x&0x1ff) /* read pointer */ - -/* equates for rx FIFO write pointer */ -#define PSC_RFWPTR(x) (x&0x1ff) /* write pointer */ - -/* equates for rx FIFO write pointer */ -#define PSC_TFWPTR(x) (x&0x1ff) /* write pointer */ - -/* equates for rx FIFO last read frame pointer reg */ -#define PSC_RFLRFPTR(x) (x&0x1ff) /* last read frame pointer */ - -/* equates for tx FIFO last read frame pointer reg */ -#define PSC_TFLRFPTR(x) (x&0x1ff) /* last read frame pointer */ - -/* equates for rx FIFO last write frame pointer reg */ -#define PSC_RFLWFPTR(x) (x&0x1ff) /* last write frame pointer */ - -/* equates for tx FIFO last write frame pointer reg */ -#define PSC_TFLWFPTR(x) (x&0x1ff) /* last write frame pointer */ - -/* PCI configuration (only for PLL determination)*/ -#define PCI_REG_PCIGSCR (MMAP_XCPCI + 0x60) /* Global status/control register */ -#define PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK 0x07000000 -#define PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT 24 - -#define PCI_REG_PCICAR (MMAP_XCPCI + 0xF8) /* Configuration Address Register */ - -/* ------------------------------------------------------------------------ */ -/* - * Macro for General Purpose Timer - */ -/* Enable and Mode Select */ -#define GPT_OCT(x) (x & 0x3)<<4/* Output Compare Type */ -#define GPT_ICT(x) (x & 0x3) /* Input Capture Type */ -#define GPT_CTRL_WDEN 0x80 /* Watchdog Enable */ -#define GPT_CTRL_CE 0x10 /* Counter Enable */ -#define GPT_CTRL_STPCNT 0x04 /* Stop continous */ -#define GPT_CTRL_ODRAIN 0x02 /* Open Drain */ -#define GPT_CTRL_INTEN 0x01 /* Interrupt Enable */ -#define GPT_MODE_GPIO(x) (x & 0x3)<<4/* Gpio Mode Type */ -#define GPT_TMS_ICT 0x01 /* Input Capture Enable */ -#define GPT_TMS_OCT 0x02 /* Output Capture Enable */ -#define GPT_TMS_PWM 0x03 /* PWM Capture Enable */ -#define GPT_TMS_SGPIO 0x04 /* PWM Capture Enable */ - -#define GPT_PWM_WIDTH(x) (x & 0xffff) - -/* Status */ -#define GPT_STA_CAPTURE(x) (x & 0xffff)/* Read of internal counter */ - -#define GPT_OVFPIN_OVF(x) (x & 0x70) /* Internal counter roll over */ -#define GPT_OVFPIN_PIN 0x01 /* Input pin - Timer 0 and 1 */ - -#define GPT_INT_TEXP 0x08 /* Timer Expired in Internal Timer mode */ -#define GPT_INT_PWMP 0x04 /* PWM end of period occurred */ -#define GPT_INT_COMP 0x02 /* OC reference event occurred */ -#define GPT_INT_CAPT 0x01 /* IC reference event occurred */ - -/* ------------------------------------------------------------------------ */ -/* - * Port configuration - */ -#define CONFIG_SYS_FEC1_PORT0_CONFIG 0x00000000 -#define CONFIG_SYS_FEC1_PORT1_CONFIG 0x00000000 -#define CONFIG_SYS_1284_PORT0_CONFIG 0x00000000 -#define CONFIG_SYS_1284_PORT1_CONFIG 0x00000000 -#define CONFIG_SYS_FEC2_PORT2_CONFIG 0x00000000 -#define CONFIG_SYS_PEV_PORT2_CONFIG 0x00000000 -#define CONFIG_SYS_GP0_PORT0_CONFIG 0x00000000 -#define CONFIG_SYS_GP1_PORT2_CONFIG 0xaaaaaac0 -#define CONFIG_SYS_PSC_PORT3_CONFIG 0x00020000 -#define CONFIG_SYS_CS1_PORT3_CONFIG 0x00000000 -#define CONFIG_SYS_CS2_PORT3_CONFIG 0x10000000 -#define CONFIG_SYS_CS3_PORT3_CONFIG 0x40000000 -#define CONFIG_SYS_CS4_PORT3_CONFIG 0x00000400 -#define CONFIG_SYS_CS5_PORT3_CONFIG 0x00000200 -#define CONFIG_SYS_PCI_PORT3_CONFIG 0x01400180 -#define CONFIG_SYS_I2C_PORT3_CONFIG 0x00000000 -#define CONFIG_SYS_GP2_PORT3_CONFIG 0x000200a0 - -/* ------------------------------------------------------------------------ */ -/* - * DRAM configuration - */ - -/* Field definitions for the control register */ -#define CTL_MODE_ENABLE_SHIFT 31 -#define CTL_CKE_SHIFT 30 -#define CTL_DDR_SHIFT 29 -#define CTL_REFRESH_SHIFT 28 -#define CTL_ADDRMUX_SHIFT 24 -#define CTL_PRECHARGE_SHIFT 23 -#define CTL_DRIVE_RULE_SHIFT 22 -#define CTL_REFRESH_INTERVAL_SHIFT 16 -#define CTL_DQSOEN_SHIFT 8 -#define CTL_BUFFERED_SHIFT 4 -#define CTL_REFRESH_CMD_SHIFT 2 -#define CTL_PRECHARGE_CMD_SHIFT 1 - -#define CTL_MODE_ENABLE (1<<CTL_MODE_ENABLE_SHIFT) -#define CTL_CKE_HIGH (1<<CTL_CKE_SHIFT) -#define CTL_DDR_MODE (1<<CTL_DDR_SHIFT) -#define CTL_REFRESH_ENABLE (1<<CTL_REFRESH_SHIFT) -#define CTL_ADDRMUX(value) ((value)<<CTL_ADDRMUX_SHIFT) -#define CTL_A8PRECHARGE (1<<CTL_PRECHARGE_SHIFT) -#define CTL_REFRESH_INTERVAL(value) ((value)<<CTL_REFRESH_INTERVAL_SHIFT) -#define CTL_DQSOEN(value) ((value)<<CTL_DQSOEN_SHIFT) -#define CTL_BUFFERED (1<<CTL_BUFFERED_SHIFT) -#define CTL_REFRESH_CMD (1<<CTL_REFRESH_CMD_SHIFT) -#define CTL_PRECHARGE_CMD (1<<CTL_PRECHARGE_CMD_SHIFT) - -/* Field definitions for config register 1 */ - -#define CFG1_SRD2RWP_SHIFT 28 -#define CFG1_SWT2RWP_SHIFT 24 -#define CFG1_RLATENCY_SHIFT 20 -#define CFG1_ACT2WR_SHIFT 16 -#define CFG1_PRE2ACT_SHIFT 12 -#define CFG1_REF2ACT_SHIFT 8 -#define CFG1_WLATENCY_SHIFT 4 - -#define CFG1_SRD2RWP(value) ((value)<<CFG1_SRD2RWP_SHIFT) -#define CFG1_SWT2RWP(value) ((value)<<CFG1_SWT2RWP_SHIFT) -#define CFG1_RLATENCY(value) ((value)<<CFG1_RLATENCY_SHIFT) -#define CFG1_ACT2WR(value) ((value)<<CFG1_ACT2WR_SHIFT) -#define CFG1_PRE2ACT(value) ((value)<<CFG1_PRE2ACT_SHIFT) -#define CFG1_REF2ACT(value) ((value)<<CFG1_REF2ACT_SHIFT) -#define CFG1_WLATENCY(value) ((value)<<CFG1_WLATENCY_SHIFT) - -/* Field definitions for config register 2 */ -#define CFG2_BRD2RP_SHIFT 28 -#define CFG2_BWT2RWP_SHIFT 24 -#define CFG2_BRD2WT_SHIFT 20 -#define CFG2_BURSTLEN_SHIFT 16 - -#define CFG2_BRD2RP(value) ((value)<<CFG2_BRD2RP_SHIFT) -#define CFG2_BWT2RWP(value) ((value)<<CFG2_BWT2RWP_SHIFT) -#define CFG2_BRD2WT(value) ((value)<<CFG2_BRD2WT_SHIFT) -#define CFG2_BURSTLEN(value) ((value)<<CFG2_BURSTLEN_SHIFT) - -/* Field definitions for the mode/extended mode register - mode - * register access - */ -#define MODE_REG_SHIFT 30 -#define MODE_OPMODE_SHIFT 25 -#define MODE_CL_SHIFT 22 -#define MODE_BT_SHIFT 21 -#define MODE_BURSTLEN_SHIFT 18 -#define MODE_CMD_SHIFT 16 - -#define MODE_MODE 0 -#define MODE_OPMODE(value) ((value)<<MODE_OPMODE_SHIFT) -#define MODE_CL(value) ((value)<<MODE_CL_SHIFT) -#define MODE_BT_INTERLEAVED (1<<MODE_BT_SHIFT) -#define MODE_BT_SEQUENTIAL (0<<MODE_BT_SHIFT) -#define MODE_BURSTLEN(value) ((value)<<MODE_BURSTLEN_SHIFT) -#define MODE_CMD (1<<MODE_CMD_SHIFT) - -#define MODE_BURSTLEN_8 3 -#define MODE_BURSTLEN_4 2 -#define MODE_BURSTLEN_2 1 - -#define MODE_CL_2 2 -#define MODE_CL_2p5 6 -#define MODE_OPMODE_NORMAL 0 -#define MODE_OPMODE_RESETDLL 2 - - -/* Field definitions for the mode/extended mode register - extended - * mode register access - */ -#define MODE_X_DLL_SHIFT 18 /* DLL enable/disable */ -#define MODE_X_DS_SHIFT 19 /* Drive strength normal/reduced */ -#define MODE_X_QFC_SHIFT 20 /* QFC function (whatever that is) */ -#define MODE_X_OPMODE_SHIFT 21 - -#define MODE_EXTENDED (1<<MODE_REG_SHIFT) -#define MODE_X_DLL_ENABLE 0 -#define MODE_X_DLL_DISABLE (1<<MODE_X_DLL_SHIFT) -#define MODE_X_DS_NORMAL 0 -#define MODE_X_DS_REDUCED (1<<MODE_X_DS_SHIFT) -#define MODE_X_QFC_DISABLED 0 -#define MODE_X_OPMODE(value) ((value)<<MODE_X_OPMODE_SHIFT) - -#ifndef __ASSEMBLY__ -/* - * DMA control/status registers. - */ -struct mpc8220_dma { - u32 taskBar; /* DMA + 0x00 */ - u32 currentPointer; /* DMA + 0x04 */ - u32 endPointer; /* DMA + 0x08 */ - u32 variablePointer;/* DMA + 0x0c */ - - u8 IntVect1; /* DMA + 0x10 */ - u8 IntVect2; /* DMA + 0x11 */ - u16 PtdCntrl; /* DMA + 0x12 */ - - u32 IntPend; /* DMA + 0x14 */ - u32 IntMask; /* DMA + 0x18 */ - - u16 tcr_0; /* DMA + 0x1c */ - u16 tcr_1; /* DMA + 0x1e */ - u16 tcr_2; /* DMA + 0x20 */ - u16 tcr_3; /* DMA + 0x22 */ - u16 tcr_4; /* DMA + 0x24 */ - u16 tcr_5; /* DMA + 0x26 */ - u16 tcr_6; /* DMA + 0x28 */ - u16 tcr_7; /* DMA + 0x2a */ - u16 tcr_8; /* DMA + 0x2c */ - u16 tcr_9; /* DMA + 0x2e */ - u16 tcr_a; /* DMA + 0x30 */ - u16 tcr_b; /* DMA + 0x32 */ - u16 tcr_c; /* DMA + 0x34 */ - u16 tcr_d; /* DMA + 0x36 */ - u16 tcr_e; /* DMA + 0x38 */ - u16 tcr_f; /* DMA + 0x3a */ - - u8 IPR0; /* DMA + 0x3c */ - u8 IPR1; /* DMA + 0x3d */ - u8 IPR2; /* DMA + 0x3e */ - u8 IPR3; /* DMA + 0x3f */ - u8 IPR4; /* DMA + 0x40 */ - u8 IPR5; /* DMA + 0x41 */ - u8 IPR6; /* DMA + 0x42 */ - u8 IPR7; /* DMA + 0x43 */ - u8 IPR8; /* DMA + 0x44 */ - u8 IPR9; /* DMA + 0x45 */ - u8 IPR10; /* DMA + 0x46 */ - u8 IPR11; /* DMA + 0x47 */ - u8 IPR12; /* DMA + 0x48 */ - u8 IPR13; /* DMA + 0x49 */ - u8 IPR14; /* DMA + 0x4a */ - u8 IPR15; /* DMA + 0x4b */ - u8 IPR16; /* DMA + 0x4c */ - u8 IPR17; /* DMA + 0x4d */ - u8 IPR18; /* DMA + 0x4e */ - u8 IPR19; /* DMA + 0x4f */ - u8 IPR20; /* DMA + 0x50 */ - u8 IPR21; /* DMA + 0x51 */ - u8 IPR22; /* DMA + 0x52 */ - u8 IPR23; /* DMA + 0x53 */ - u8 IPR24; /* DMA + 0x54 */ - u8 IPR25; /* DMA + 0x55 */ - u8 IPR26; /* DMA + 0x56 */ - u8 IPR27; /* DMA + 0x57 */ - u8 IPR28; /* DMA + 0x58 */ - u8 IPR29; /* DMA + 0x59 */ - u8 IPR30; /* DMA + 0x5a */ - u8 IPR31; /* DMA + 0x5b */ - - u32 res1; /* DMA + 0x5c */ - u32 res2; /* DMA + 0x60 */ - u32 res3; /* DMA + 0x64 */ - u32 MDEDebug; /* DMA + 0x68 */ - u32 ADSDebug; /* DMA + 0x6c */ - u32 Value1; /* DMA + 0x70 */ - u32 Value2; /* DMA + 0x74 */ - u32 Control; /* DMA + 0x78 */ - u32 Status; /* DMA + 0x7c */ - u32 EU00; /* DMA + 0x80 */ - u32 EU01; /* DMA + 0x84 */ - u32 EU02; /* DMA + 0x88 */ - u32 EU03; /* DMA + 0x8c */ - u32 EU04; /* DMA + 0x90 */ - u32 EU05; /* DMA + 0x94 */ - u32 EU06; /* DMA + 0x98 */ - u32 EU07; /* DMA + 0x9c */ - u32 EU10; /* DMA + 0xa0 */ - u32 EU11; /* DMA + 0xa4 */ - u32 EU12; /* DMA + 0xa8 */ - u32 EU13; /* DMA + 0xac */ - u32 EU14; /* DMA + 0xb0 */ - u32 EU15; /* DMA + 0xb4 */ - u32 EU16; /* DMA + 0xb8 */ - u32 EU17; /* DMA + 0xbc */ - u32 EU20; /* DMA + 0xc0 */ - u32 EU21; /* DMA + 0xc4 */ - u32 EU22; /* DMA + 0xc8 */ - u32 EU23; /* DMA + 0xcc */ - u32 EU24; /* DMA + 0xd0 */ - u32 EU25; /* DMA + 0xd4 */ - u32 EU26; /* DMA + 0xd8 */ - u32 EU27; /* DMA + 0xdc */ - u32 EU30; /* DMA + 0xe0 */ - u32 EU31; /* DMA + 0xe4 */ - u32 EU32; /* DMA + 0xe8 */ - u32 EU33; /* DMA + 0xec */ - u32 EU34; /* DMA + 0xf0 */ - u32 EU35; /* DMA + 0xf4 */ - u32 EU36; /* DMA + 0xf8 */ - u32 EU37; /* DMA + 0xfc */ -}; - -/* - * PCI Header Registers - */ -typedef struct mpc8220_xcpci { - u32 dev_ven_id; /* 0xb00 - device/vendor ID */ - u32 stat_cmd_reg; /* 0xb04 - status command register */ - u32 class_code_rev_id; /* 0xb08 - class code / revision ID */ - u32 bist_htyp_lat_cshl; /* 0xb0c - BIST/HeaderType/Latency/cache line */ - u32 base0; /* 0xb10 - base address 0 */ - u32 base1; /* 0xb14 - base address 1 */ - u32 reserved1[4]; /* 0xb18->0xd27 - base address 2 - 5 */ - u32 cis; /* 0xb28 - cardBus CIS pointer */ - u32 sub_sys_ven_id; /* 0xb2c - sub system ID/ subsystem vendor ID */ - u32 reserved2; /* 0xb30 - expansion ROM base address */ - u32 reserved3; /* 0xb00 - reserved */ - u32 reserved4; /* 0xb00 - reserved */ - u32 mlat_mgnt_ipl; /* 0xb3c - MaxLat/MinGnt/ int pin/int line */ - u32 reserved5[8]; - /* MPC8220 specific - not accessible in PCI header space externally */ - u32 glb_stat_ctl; /* 0xb60 - Global Status Control */ - u32 target_bar0; /* 0xb64 - Target Base Address 0 */ - u32 target_bar1; /* 0xb68 - Target Base Address 1 */ - u32 target_ctrl; /* 0xb6c - Target Control */ - u32 init_win0; /* 0xb70 - Initiator Window 0 Base/Translation */ - u32 init_win1; /* 0xb74 - Initiator Window 1 Base/Translation */ - u32 init_win2; /* 0xb78 - Initiator Window 2 Base/Translation */ - u32 reserved6; /* 0xb7c - reserved */ - u32 init_win_cfg; /* 0xb80 */ - u32 init_ctrl; /* 0xb84 */ - u32 init_stat; /* 0xb88 */ - u32 reserved7[27]; - u32 cfg_adr; /* 0xbf8 */ - u32 reserved8; -} mpc8220_xcpci_t; - -/* PCI->XLB space translation (MPC8220 target), reg0 can address max 256MB, - reg1 - 1GB */ -#define PCI_BASE_ADDR_REG0 0x40000000 -#define PCI_BASE_ADDR_REG1 (CONFIG_SYS_SDRAM_BASE) -#define PCI_TARGET_BASE_ADDR_REG0 (CONFIG_SYS_MBAR) -#define PCI_TARGET_BASE_ADDR_REG1 (CONFIG_SYS_SDRAM_BASE) -#define PCI_TARGET_BASE_ADDR_EN 1<<0 - - -/* PCI Global Status/Control Register (PCIGSCR) */ -#define PCI_GLB_STAT_CTRL_PE_SHIFT 29 -#define PCI_GLB_STAT_CTRL_SE_SHIFT 28 -#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_SHIFT 24 -#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_MASK 0x7 -#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_SHIFT 16 -#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_MASK 0x7 -#define PCI_GLB_STAT_CTRL_PEE_SHIFT 13 -#define PCI_GLB_STAT_CTRL_SEE_SHIFT 12 -#define PCI_GLB_STAT_CTRL_PR_SHIFT 0 - -#define PCI_GLB_STAT_CTRL_PE (1<<PCI_GLB_STAT_CTRL_PE_SHIFT) -#define PCI_GLB_STAT_CTRL_SE (1<<PCI_GLB_STAT_CTRL_SE_SHIFT) -#define PCI_GLB_STAT_CTRL_PEE (1<<PCI_GLB_STAT_CTRL_PEE_SHIFT) -#define PCI_GLB_STAT_CTRL_SEE (1<<PCI_GLB_STAT_CTRL_SEE_SHIFT) -#define PCI_GLB_STAT_CTRL_PR (1<<PCI_GLB_STAT_CTRL_PR_SHIFT) - -/* PCI Target Control Register (PCITCR) */ -#define PCI_TARGET_CTRL_LD_SHIFT 24 -#define PCI_TARGET_CTRL_P_SHIFT 16 - -#define PCI_TARGET_CTRL_LD (1<<PCI_TARGET_CTRL_LD_SHIFT) -#define PCI_TARGET_CTRL_P (1<<PCI_TARGET_CTRL_P_SHIFT) - -/* PCI Initiator Window Configuration Register (PCIIWCR) */ -#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT 27 -#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_SHIFT 25 -#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_MASK 0x3 -#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT 24 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT 19 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_SHIFT 17 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_MASK 0x3 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT 16 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT 11 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_SHIFT 9 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_MASK 0x3 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT 8 - -#define PCI_INIT_WIN_CFG_WIN_MEM_READ 0x0 -#define PCI_INIT_WIN_CFG_WIN_MEM_READ_LINE 0x1 -#define PCI_INIT_WIN_CFG_WIN_MEM_READ_MULTIPLE 0x2 - -#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT) -#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT) -#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT) -#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT) -#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT) -#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT) - -/* PCI Initiator Control Register (PCIICR) */ -#define PCI_INIT_CTRL_REE_SHIFT 26 -#define PCI_INIT_CTRL_IAE_SHIFT 25 -#define PCI_INIT_CTRL_TAE_SHIFT 24 -#define PCI_INIT_CTRL_MAX_RETRIES_SHIFT 0 -#define PCI_INIT_CTRL_MAX_RETRIES_MASK 0xff - -#define PCI_INIT_CTRL_REE (1<<PCI_INIT_CTRL_REE_SHIFT) -#define PCI_INIT_CTRL_IAE (1<<PCI_INIT_CTRL_IAE_SHIFT) -#define PCI_INIT_CTRL_TAE (1<<PCI_INIT_CTRL_TAE_SHIFT) - -/* PCI Status/Command Register (PCISCR) - PCI Dword 1 */ -#define PCI_STAT_CMD_PE_SHIFT 31 -#define PCI_STAT_CMD_SE_SHIFT 30 -#define PCI_STAT_CMD_MA_SHIFT 29 -#define PCI_STAT_CMD_TR_SHIFT 28 -#define PCI_STAT_CMD_TS_SHIFT 27 -#define PCI_STAT_CMD_DT_SHIFT 25 -#define PCI_STAT_CMD_DT_MASK 0x3 -#define PCI_STAT_CMD_DP_SHIFT 24 -#define PCI_STAT_CMD_FC_SHIFT 23 -#define PCI_STAT_CMD_R_SHIFT 22 -#define PCI_STAT_CMD_66M_SHIFT 21 -#define PCI_STAT_CMD_C_SHIFT 20 -#define PCI_STAT_CMD_F_SHIFT 9 -#define PCI_STAT_CMD_S_SHIFT 8 -#define PCI_STAT_CMD_ST_SHIFT 7 -#define PCI_STAT_CMD_PER_SHIFT 6 -#define PCI_STAT_CMD_V_SHIFT 5 -#define PCI_STAT_CMD_MW_SHIFT 4 -#define PCI_STAT_CMD_SP_SHIFT 3 -#define PCI_STAT_CMD_B_SHIFT 2 -#define PCI_STAT_CMD_M_SHIFT 1 -#define PCI_STAT_CMD_IO_SHIFT 0 - -#define PCI_STAT_CMD_PE (1<<PCI_STAT_CMD_PE_SHIFT) -#define PCI_STAT_CMD_SE (1<<PCI_STAT_CMD_SE_SHIFT) -#define PCI_STAT_CMD_MA (1<<PCI_STAT_CMD_MA_SHIFT) -#define PCI_STAT_CMD_TR (1<<PCI_STAT_CMD_TR_SHIFT) -#define PCI_STAT_CMD_TS (1<<PCI_STAT_CMD_TS_SHIFT) -#define PCI_STAT_CMD_DP (1<<PCI_STAT_CMD_DP_SHIFT) -#define PCI_STAT_CMD_FC (1<<PCI_STAT_CMD_FC_SHIFT) -#define PCI_STAT_CMD_R (1<<PCI_STAT_CMD_R_SHIFT) -#define PCI_STAT_CMD_66M (1<<PCI_STAT_CMD_66M_SHIFT) -#define PCI_STAT_CMD_C (1<<PCI_STAT_CMD_C_SHIFT) -#define PCI_STAT_CMD_F (1<<PCI_STAT_CMD_F_SHIFT) -#define PCI_STAT_CMD_S (1<<PCI_STAT_CMD_S_SHIFT) -#define PCI_STAT_CMD_ST (1<<PCI_STAT_CMD_ST_SHIFT) -#define PCI_STAT_CMD_PER (1<<PCI_STAT_CMD_PER_SHIFT) -#define PCI_STAT_CMD_V (1<<PCI_STAT_CMD_V_SHIFT) -#define PCI_STAT_CMD_MW (1<<PCI_STAT_CMD_MW_SHIFT) -#define PCI_STAT_CMD_SP (1<<PCI_STAT_CMD_SP_SHIFT) -#define PCI_STAT_CMD_B (1<<PCI_STAT_CMD_B_SHIFT) -#define PCI_STAT_CMD_M (1<<PCI_STAT_CMD_M_SHIFT) -#define PCI_STAT_CMD_IO (1<<PCI_STAT_CMD_IO_SHIFT) - -/* PCI Configuration 1 Register (PCICR1) - PCI Dword 3 */ -#define PCI_CFG1_HT_SHIFT 16 -#define PCI_CFG1_HT_MASK 0xff -#define PCI_CFG1_LT_SHIFT 8 -#define PCI_CFG1_LT_MASK 0xff -#define PCI_CFG1_CLS_SHIFT 0 -#define PCI_CFG1_CLS_MASK 0xf - -/* function prototypes */ -void loadtask(int basetask, int tasks); -u32 dramSetup(void); - -#if defined(CONFIG_PSC_CONSOLE) -int psc_serial_init (void); -void psc_serial_putc(const char c); -void psc_serial_puts (const char *s); -int psc_serial_getc(void); -int psc_serial_tstc(void); -void psc_serial_setbrg(void); -#endif - -#if defined (CONFIG_EXTUART_CONSOLE) -int ext_serial_init (void); -void ext_serial_putc(const char c); -void ext_serial_puts (const char *s); -int ext_serial_getc(void); -int ext_serial_tstc(void); -void ext_serial_setbrg(void); -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* __MPC8220_H__ */ diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h index 966b5e0..b644b91 100644 --- a/include/mtd/cfi_flash.h +++ b/include/mtd/cfi_flash.h @@ -129,12 +129,16 @@ typedef union { } cfiword_t; /* CFI standard query structure */ +/* The offsets and sizes of this packed structure members correspond + * to the actual layout in CFI Flash chips. Some 16- and 32-bit members + * are unaligned and must be accessed with explicit unaligned access macros. + */ struct cfi_qry { u8 qry[3]; - u16 p_id; - u16 p_adr; - u16 a_id; - u16 a_adr; + u16 p_id; /* unaligned */ + u16 p_adr; /* unaligned */ + u16 a_id; /* unaligned */ + u16 a_adr; /* unaligned */ u8 vcc_min; u8 vcc_max; u8 vpp_min; @@ -148,10 +152,10 @@ struct cfi_qry { u8 block_erase_timeout_max; u8 chip_erase_timeout_max; u8 dev_size; - u16 interface_desc; - u16 max_buf_write_size; + u16 interface_desc; /* aligned */ + u16 max_buf_write_size; /* aligned */ u8 num_erase_regions; - u32 erase_region_info[NUM_ERASE_REGIONS]; + u32 erase_region_info[NUM_ERASE_REGIONS]; /* unaligned */ } __attribute__((packed)); struct cfi_pri_hdr { diff --git a/include/linux/mtd/mtd-abi.h b/include/mtd/mtd-abi.h index 8bdd231..d51c1ab 100644 --- a/include/linux/mtd/mtd-abi.h +++ b/include/mtd/mtd-abi.h @@ -24,6 +24,25 @@ struct mtd_oob_buf { unsigned char __user *ptr; }; +/* + * MTD operation modes + * + * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default) + * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas + * which are defined by the internal ecclayout + * @MTD_OPS_RAW: data are transferred as-is, with no error correction; + * this mode implies %MTD_OPS_PLACE_OOB + * + * These modes can be passed to ioctl(MEMWRITE) and are also used internally. + * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs. + * %MTD_FILE_MODE_RAW. + */ +enum { + MTD_OPS_PLACE_OOB = 0, + MTD_OPS_AUTO_OOB = 1, + MTD_OPS_RAW = 2, +}; + #define MTD_ABSENT 0 #define MTD_RAM 1 #define MTD_ROM 2 @@ -82,24 +101,42 @@ struct otp_info { uint32_t locked; }; +/* Get basic MTD characteristics info (better to use sysfs) */ #define MEMGETINFO _IOR('M', 1, struct mtd_info_user) +/* Erase segment of MTD */ #define MEMERASE _IOW('M', 2, struct erase_info_user) +/* Write out-of-band data from MTD */ #define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) +/* Read out-of-band data from MTD */ #define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) +/* Lock a chip (for MTD that supports it) */ #define MEMLOCK _IOW('M', 5, struct erase_info_user) +/* Unlock a chip (for MTD that supports it) */ #define MEMUNLOCK _IOW('M', 6, struct erase_info_user) +/* Get the number of different erase regions */ #define MEMGETREGIONCOUNT _IOR('M', 7, int) +/* Get information about the erase region for a specific index */ #define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user) +/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */ #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo) #define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo) +/* Check if an eraseblock is bad */ #define MEMGETBADBLOCK _IOW('M', 11, loff_t) +/* Mark an eraseblock as bad */ #define MEMSETBADBLOCK _IOW('M', 12, loff_t) +/* Set OTP (One-Time Programmable) mode (factory vs. user) */ #define OTPSELECT _IOR('M', 13, int) +/* Get number of OTP (One-Time Programmable) regions */ #define OTPGETREGIONCOUNT _IOW('M', 14, int) +/* Get all OTP (One-Time Programmable) info about MTD */ #define OTPGETREGIONINFO _IOW('M', 15, struct otp_info) +/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */ #define OTPLOCK _IOR('M', 16, struct otp_info) +/* Get ECC layout (deprecated) */ #define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout) +/* Get statistics about corrected/uncorrected errors */ #define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats) +/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */ #define MTDFILEMODE _IO('M', 19) /* @@ -146,7 +183,21 @@ struct mtd_ecc_stats { }; /* - * Read/write file modes for access to MTD + * MTD file modes - for read/write access to MTD + * + * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled + * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode + * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode + * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled + * + * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained + * separately for each open file descriptor. + * + * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW - + * raw access to the flash, without error correction or autoplacement schemes. + * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode + * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is + * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)). */ enum mtd_file_modes { MTD_MODE_NORMAL = MTD_OTP_OFF, diff --git a/include/nand.h b/include/nand.h index f0f3bf9..26190e4 100644 --- a/include/nand.h +++ b/include/nand.h @@ -31,7 +31,8 @@ * at the same time, so do it here. When all drivers are * converted, this will go away. */ -#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL) +#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL)\ + || defined(CONFIG_NAND_FSL_IFC) #define CONFIG_SYS_NAND_SELF_INIT #endif @@ -55,17 +56,17 @@ extern nand_info_t nand_info[]; static inline int nand_read(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf) { - return info->read(info, ofs, *len, (size_t *)len, buf); + return mtd_read(info, ofs, *len, (size_t *)len, buf); } static inline int nand_write(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf) { - return info->write(info, ofs, *len, (size_t *)len, buf); + return mtd_write(info, ofs, *len, (size_t *)len, buf); } static inline int nand_block_isbad(nand_info_t *info, loff_t ofs) { - return info->block_isbad(info, ofs); + return mtd_block_isbad(info, ofs); } static inline int nand_erase(nand_info_t *info, loff_t off, size_t size) @@ -77,7 +78,7 @@ static inline int nand_erase(nand_info_t *info, loff_t off, size_t size) instr.len = size; instr.callback = 0; - return info->erase(info, &instr); + return mtd_erase(info, &instr); } diff --git a/include/net.h b/include/net.h index 970d4d1..23fb947 100644 --- a/include/net.h +++ b/include/net.h @@ -695,6 +695,9 @@ extern void copy_filename(char *dst, const char *src, int size); /* get a random source port */ extern unsigned int random_port(void); +/* Update U-Boot over TFTP */ +extern int update_tftp(ulong addr); + /**********************************************************************/ #endif /* __NET_H__ */ diff --git a/include/netdev.h b/include/netdev.h index fd3e243..df454b5 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -77,7 +77,6 @@ int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); int mpc512x_fec_initialize(bd_t *bis); int mpc5xxx_fec_initialize(bd_t *bis); -int mpc8220_fec_initialize(bd_t *bis); int mpc82xx_scc_enet_initialize(bd_t *bis); int mvgbe_initialize(bd_t *bis); int natsemi_initialize(bd_t *bis); @@ -104,7 +103,7 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, int txpp, int rxpp); int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags, unsigned long ctrl_addr); -int zynq_gem_initialize(bd_t *bis, int base_addr); +int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio); /* * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface * exported by a public hader file, we need a global definition at this point. diff --git a/include/twl6035.h b/include/palmas.h index ce74348..3b18589 100644 --- a/include/twl6035.h +++ b/include/palmas.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2012 + * (C) Copyright 2012-2013 * Texas Instruments, <www.ti.com> * * See file CREDITS for list of people who contributed to this @@ -20,12 +20,14 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ +#ifndef PALMAS_H +#define PALMAS_H #include <common.h> #include <i2c.h> /* I2C chip addresses */ -#define TWL6035_CHIP_ADDR 0x48 +#define PALMAS_CHIP_ADDR 0x48 /* 0x1XY translates to page 1, register address 0xXY */ #define LDO9_CTRL 0x60 @@ -36,7 +38,21 @@ #define LDO_MODE_SLEEP (1 << 2) #define LDO_MODE_ACTIVE (1 << 0) -int twl6035_i2c_write_u8(u8 chip_no, u8 val, u8 reg); -int twl6035_i2c_read_u8(u8 chip_no, u8 *val, u8 reg); -void twl6035_init_settings(void); -int twl6035_mmc1_poweron_ldo(void); +/* + * Functions to read and write from TPS659038/TWL6035/TWL6037 + * or other Palmas family of TI PMICs + */ +static inline int palmas_i2c_write_u8(u8 chip_no, u8 reg, u8 val) +{ + return i2c_write(chip_no, reg, 1, &val, 1); +} + +static inline int palmas_i2c_read_u8(u8 chip_no, u8 reg, u8 *val) +{ + return i2c_read(chip_no, reg, 1, val, 1); +} + +void palmas_init_settings(void); +int palmas_mmc1_poweron_ldo(void); + +#endif /* PALMAS_H */ diff --git a/include/phy.h b/include/phy.h index 58ca273..75bf3b4 100644 --- a/include/phy.h +++ b/include/phy.h @@ -52,6 +52,7 @@ typedef enum { PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_SGMII, + PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII, @@ -67,6 +68,7 @@ static const char *phy_interface_strings[] = { [PHY_INTERFACE_MODE_MII] = "mii", [PHY_INTERFACE_MODE_GMII] = "gmii", [PHY_INTERFACE_MODE_SGMII] = "sgmii", + [PHY_INTERFACE_MODE_QSGMII] = "qsgmii", [PHY_INTERFACE_MODE_TBI] = "tbi", [PHY_INTERFACE_MODE_RMII] = "rmii", [PHY_INTERFACE_MODE_RGMII] = "rgmii", @@ -223,6 +225,7 @@ int gen10g_discover_mmds(struct phy_device *phydev); int phy_atheros_init(void); int phy_broadcom_init(void); int phy_davicom_init(void); +int phy_et1011c_init(void); int phy_lxt_init(void); int phy_marvell_init(void); int phy_micrel_init(void); diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index 2db4784..c0f8cc8 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -175,7 +175,7 @@ #define IM_IMMR (IM_REGBASE+0x01a8) #define IM_SCCR (IM_REGBASE+0x0c80) -#elif defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC8220) +#elif defined(CONFIG_MPC5xxx) #define HID0_ICE_BITPOS 16 #define HID0_DCE_BITPOS 17 diff --git a/include/spl.h b/include/spl.h index b40be80..4bc1dd1 100644 --- a/include/spl.h +++ b/include/spl.h @@ -44,7 +44,6 @@ struct spl_image_info { #define SPL_COPY_PAYLOAD_ONLY 1 extern struct spl_image_info spl_image; -extern u32 *boot_params_ptr; /* SPL common functions */ void preloader_console_init(void); diff --git a/include/twl4030.h b/include/twl4030.h index 5aa1841..569ad27 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -638,12 +638,12 @@ * examples are TWL4030_PM_RECEIVER_VMMC1_DEV_GRP and * TWL4030_LED_LEDEN. */ -static inline int twl4030_i2c_write_u8(u8 chip_no, u8 val, u8 reg) +static inline int twl4030_i2c_write_u8(u8 chip_no, u8 reg, u8 val) { return i2c_write(chip_no, reg, 1, &val, 1); } -static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg) +static inline int twl4030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val) { return i2c_read(chip_no, reg, 1, val, 1); } diff --git a/include/twl6030.h b/include/twl6030.h index a9fcadb..029b21f 100644 --- a/include/twl6030.h +++ b/include/twl6030.h @@ -21,6 +21,9 @@ * MA 02111-1307 USA */ +#ifndef TWL6030_H +#define TWL6030_H + #include <common.h> #include <i2c.h> @@ -126,6 +129,17 @@ #define GPCH0_LSB 0x57 #define GPCH0_MSB 0x58 +/* Functions to read and write from TWL6030 */ +static inline int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val) +{ + return i2c_write(chip_no, reg, 1, &val, 1); +} + +static inline int twl6030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val) +{ + return i2c_read(chip_no, reg, 1, val, 1); +} + void twl6030_init_battery_charging(void); void twl6030_usb_device_settings(void); void twl6030_start_usb_charging(void); @@ -133,3 +147,5 @@ void twl6030_stop_usb_charging(void); int twl6030_get_battery_voltage(void); int twl6030_get_battery_current(void); void twl6030_power_mmc_init(void); + +#endif /* TWL6030_H */ diff --git a/include/usb.h b/include/usb.h index d79c865..d7b082d 100644 --- a/include/usb.h +++ b/include/usb.h @@ -76,6 +76,12 @@ struct usb_interface { unsigned char act_altsetting; struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; + /* + * Super Speed Device will have Super Speed Endpoint + * Companion Descriptor (section 9.6.7 of usb 3.0 spec) + * Revision 1.0 June 6th 2011 + */ + struct usb_ss_ep_comp_descriptor ss_ep_comp_desc[USB_MAXENDPOINTS]; } __attribute__ ((packed)); /* Configuration information.. */ diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h index a1438d6..29b136d 100644 --- a/include/usb/ehci-fsl.h +++ b/include/usb/ehci-fsl.h @@ -277,10 +277,4 @@ struct usb_ehci { /* Board-specific initialization */ int board_ehci_hcd_init(int port); -/* CPU-specific abstracted-out IOMUX init */ -#ifdef CONFIG_MX51 -void setup_iomux_usb_h1(void); -void setup_iomux_usb_h2(void); -#endif - #endif /* _EHCI_FSL_H */ diff --git a/include/usb_defs.h b/include/usb_defs.h index 9502544..4f3601a 100644 --- a/include/usb_defs.h +++ b/include/usb_defs.h @@ -150,6 +150,18 @@ #define USB_REQ_SET_IDLE 0x0A #define USB_REQ_SET_PROTOCOL 0x0B +/* Device features */ +#define USB_FEAT_HALT 0x00 +#define USB_FEAT_WAKEUP 0x01 +#define USB_FEAT_TEST 0x02 + +/* Test modes */ +#define USB_TEST_MODE_J 0x01 +#define USB_TEST_MODE_K 0x02 +#define USB_TEST_MODE_SE0_NAK 0x03 +#define USB_TEST_MODE_PACKET 0x04 +#define USB_TEST_MODE_FORCE_ENABLE 0x05 + /* "pipe" definitions */ @@ -208,6 +220,18 @@ #define USB_PORT_FEAT_C_SUSPEND 18 #define USB_PORT_FEAT_C_OVER_CURRENT 19 #define USB_PORT_FEAT_C_RESET 20 +#define USB_PORT_FEAT_TEST 21 + +/* + * Changes to Port feature numbers for Super speed, + * from USB 3.0 spec Table 10-8 + */ +#define USB_SS_PORT_FEAT_U1_TIMEOUT 23 +#define USB_SS_PORT_FEAT_U2_TIMEOUT 24 +#define USB_SS_PORT_FEAT_C_LINK_STATE 25 +#define USB_SS_PORT_FEAT_C_CONFIG_ERROR 26 +#define USB_SS_PORT_FEAT_BH_RESET 28 +#define USB_SS_PORT_FEAT_C_BH_RESET 29 /* wPortStatus bits */ #define USB_PORT_STAT_CONNECTION 0x0001 @@ -218,9 +242,19 @@ #define USB_PORT_STAT_POWER 0x0100 #define USB_PORT_STAT_LOW_SPEED 0x0200 #define USB_PORT_STAT_HIGH_SPEED 0x0400 /* support for EHCI */ -#define USB_PORT_STAT_SPEED \ +#define USB_PORT_STAT_SUPER_SPEED 0x0600 /* faking support to XHCI */ +#define USB_PORT_STAT_SPEED_MASK \ (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED) +/* + * Changes to wPortStatus bit field in USB 3.0 + * See USB 3.0 spec Table 10-11 + */ +#define USB_SS_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_SS_PORT_STAT_SPEED 0x1c00 +#define USB_SS_PORT_STAT_SPEED_5GBPS 0x0000 + /* wPortChange bits */ #define USB_PORT_STAT_C_CONNECTION 0x0001 #define USB_PORT_STAT_C_ENABLE 0x0002 @@ -228,13 +262,21 @@ #define USB_PORT_STAT_C_OVERCURRENT 0x0008 #define USB_PORT_STAT_C_RESET 0x0010 +/* + * Changes to wPortChange bit fields in USB 3.0 + * See USB 3.0 spec Table 10-12 + */ +#define USB_SS_PORT_STAT_C_BH_RESET 0x0020 +#define USB_SS_PORT_STAT_C_LINK_STATE 0x0040 +#define USB_SS_PORT_STAT_C_CONFIG_ERROR 0x0080 + /* wHubCharacteristics (masks) */ #define HUB_CHAR_LPSM 0x0003 #define HUB_CHAR_COMPOUND 0x0004 #define HUB_CHAR_OCPM 0x0018 /* - *Hub Status & Hub Change bit masks + * Hub Status & Hub Change bit masks */ #define HUB_STATUS_LOCAL_POWER 0x0001 #define HUB_STATUS_OVERCURRENT 0x0002 diff --git a/include/watchdog.h b/include/watchdog.h index 97ec186..d95e4b1 100644 --- a/include/watchdog.h +++ b/include/watchdog.h @@ -108,8 +108,7 @@ int init_func_watchdog_reset(void); void reset_4xx_watchdog(void); #endif -/* Freescale i.MX */ -#if defined(CONFIG_IMX_WATCHDOG) && !defined(__ASSEMBLY__) +#if defined(CONFIG_HW_WATCHDOG) && !defined(__ASSEMBLY__) void hw_watchdog_init(void); #endif #endif /* _WATCHDOG_H_ */ diff --git a/include/xilinx.h b/include/xilinx.h index 5f25b7a..9a64771 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -27,28 +27,6 @@ #ifndef _XILINX_H_ #define _XILINX_H_ -/* Xilinx Model definitions - *********************************************************************/ -#define CONFIG_SYS_SPARTAN2 CONFIG_SYS_FPGA_DEV( 0x1 ) -#define CONFIG_SYS_VIRTEX_E CONFIG_SYS_FPGA_DEV( 0x2 ) -#define CONFIG_SYS_VIRTEX2 CONFIG_SYS_FPGA_DEV( 0x4 ) -#define CONFIG_SYS_SPARTAN3 CONFIG_SYS_FPGA_DEV( 0x8 ) -#define CONFIG_SYS_XILINX_SPARTAN2 (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_SPARTAN2) -#define CONFIG_SYS_XILINX_VIRTEX_E (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_VIRTEX_E) -#define CONFIG_SYS_XILINX_VIRTEX2 (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_VIRTEX2) -#define CONFIG_SYS_XILINX_SPARTAN3 (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_SPARTAN3) -/* XXX - Add new models here */ - - -/* Xilinx Interface definitions - *********************************************************************/ -#define CONFIG_SYS_XILINX_IF_SS CONFIG_SYS_FPGA_IF( 0x1 ) /* slave serial */ -#define CONFIG_SYS_XILINX_IF_MS CONFIG_SYS_FPGA_IF( 0x2 ) /* master serial */ -#define CONFIG_SYS_XILINX_IF_SP CONFIG_SYS_FPGA_IF( 0x4 ) /* slave parallel */ -#define CONFIG_SYS_XILINX_IF_JTAG CONFIG_SYS_FPGA_IF( 0x8 ) /* jtag */ -#define CONFIG_SYS_XILINX_IF_MSM CONFIG_SYS_FPGA_IF( 0x10 ) /* master selectmap */ -#define CONFIG_SYS_XILINX_IF_SSM CONFIG_SYS_FPGA_IF( 0x20 ) /* slave selectmap */ - /* Xilinx types *********************************************************************/ typedef enum { /* typedef Xilinx_iface */ @@ -59,6 +37,7 @@ typedef enum { /* typedef Xilinx_iface */ jtag_mode, /* jtag/tap serial (not used ) */ master_selectmap, /* master SelectMap (virtex2) */ slave_selectmap, /* slave SelectMap (virtex2) */ + devcfg, /* devcfg interface (zynq) */ max_xilinx_iface_type /* insert all new types before this */ } Xilinx_iface; /* end, typedef Xilinx_iface */ @@ -68,6 +47,7 @@ typedef enum { /* typedef Xilinx_Family */ Xilinx_VirtexE, /* Virtex-E Family */ Xilinx_Virtex2, /* Virtex2 Family */ Xilinx_Spartan3, /* Spartan-III Family */ + xilinx_zynq, /* Zynq Family */ max_xilinx_type /* insert all new types before this */ } Xilinx_Family; /* end, typedef Xilinx_Family */ @@ -77,6 +57,7 @@ typedef struct { /* typedef Xilinx_desc */ size_t size; /* bytes of data part can accept */ void *iface_fns; /* interface function table */ int cookie; /* implementation specific cookie */ + char *name; /* device name in bitstream */ } Xilinx_desc; /* end, typedef Xilinx_desc */ /* Generic Xilinx Functions diff --git a/include/zynqpl.h b/include/zynqpl.h new file mode 100644 index 0000000..0247ef6 --- /dev/null +++ b/include/zynqpl.h @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2012-2013, Xilinx, Michal Simek + * + * (C) Copyright 2012 + * Joe Hershberger <joe.hershberger@ni.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ZYNQPL_H_ +#define _ZYNQPL_H_ + +#include <xilinx.h> + +extern int zynq_load(Xilinx_desc *desc, const void *image, size_t size); +extern int zynq_dump(Xilinx_desc *desc, const void *buf, size_t bsize); +extern int zynq_info(Xilinx_desc *desc); + +#define XILINX_ZYNQ_7010 0x2 +#define XILINX_ZYNQ_7020 0x7 +#define XILINX_ZYNQ_7030 0xc +#define XILINX_ZYNQ_7045 0x11 + +/* Device Image Sizes */ +#define XILINX_XC7Z010_SIZE 16669920/8 +#define XILINX_XC7Z020_SIZE 32364512/8 +#define XILINX_XC7Z030_SIZE 47839328/8 +#define XILINX_XC7Z045_SIZE 106571232/8 + +/* Descriptor Macros */ +#define XILINX_XC7Z010_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z010_SIZE, NULL, cookie, "7z010" } + +#define XILINX_XC7Z020_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z020_SIZE, NULL, cookie, "7z020" } + +#define XILINX_XC7Z030_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z030_SIZE, NULL, cookie, "7z030" } + +#define XILINX_XC7Z045_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z045_SIZE, NULL, cookie, "7z045" } + +#endif /* _ZYNQPL_H_ */ |