diff options
Diffstat (limited to 'include')
96 files changed, 213 insertions, 353 deletions
diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 7eac03b..d0f4d75 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -74,12 +74,10 @@ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* CONFIG_MCFFEC */ #define CONFIG_HOSTNAME M5208EVBe diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 4bba815..a766324 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -95,12 +95,10 @@ #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ #define CONFIG_BOOTFILE "u-boot.bin" #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ #define CONFIG_HOSTNAME M5235EVB diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 159d2f8..9946108 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -94,12 +94,10 @@ #endif #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* CONFIG_MCFFEC */ #define CONFIG_HOSTNAME M5272C3 diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index bc740ae..4d3390b 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -80,12 +80,10 @@ #define CONFIG_BOOTDELAY 5 #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* CONFIG_MCFFEC */ #define CONFIG_HOSTNAME M5282EVB diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 0829708..e2dd8e5 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -94,13 +94,10 @@ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ #define CONFIG_HOSTNAME M53017 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index a42b5f6..5a7597c 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -88,12 +88,10 @@ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ #define CONFIG_HOSTNAME M5329EVB diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index c142dfb..7550c57 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -88,12 +88,10 @@ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ #define CONFIG_HOSTNAME M5373EVB diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 3a6e981..25b3cda 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -113,15 +113,12 @@ "::eth0:off:rw console=ttyS0,115200" #endif -#define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -#define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 #define CONFIG_ETHPRIME "FEC0" #define CONFIG_IPADDR 192.168.1.2 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_OVERWRITE_ETHADDR_ONCE #define CONFIG_SYS_FEC_BUF_USE_SRAM /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ #ifndef CONFIG_SYS_DISCOVER_PHY diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 1b3598a..f3cade3 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -77,13 +77,11 @@ # define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ # define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)" -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_ETHPRIME "FEC0" # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 2288bff..b708001 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -83,14 +83,11 @@ # define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ # define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 # define CONFIG_ETHPRIME "FEC0" # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 91d6a1a..658c170 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -75,13 +75,10 @@ # endif # endif /* CONFIG_SYS_DISCOVER_PHY */ -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif @@ -135,12 +132,10 @@ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ #define CONFIG_HOSTNAME M547xEVB diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index ce9f3b0..efb64a1 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -75,13 +75,10 @@ # endif # endif /* CONFIG_SYS_DISCOVER_PHY */ -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 # define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE #endif diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index dc09b1f..d41eeb5 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -720,13 +720,9 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD #define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD #endif #define CONFIG_IPADDR 192.168.1.254 diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 37c2b94..b388168 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -12,7 +12,7 @@ * Please refer to doc/README.mpc85xx for more info. * * Make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + * search for CONFIG_SERVERIP, etc in this file. */ #ifndef __CONFIG_H @@ -406,11 +406,8 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 5d229a0..609c5bb 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -418,11 +418,8 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index dade6d3..479589e 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -449,9 +449,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD #endif #define CONFIG_IPADDR 192.168.1.251 diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 190c668..fb28512 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -539,17 +539,11 @@ extern unsigned long get_clock_freq(void); /* * Environment Configuration */ - -/* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 5263ffc..48b55b5 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -412,15 +412,10 @@ extern unsigned long get_clock_freq(void); /* * Environment Configuration */ - -/* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index ac78d48..92f0b7f 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -12,7 +12,7 @@ * Please refer to doc/README.mpc85xx for more info. * * Make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + * search for CONFIG_SERVERIP, etc. in this file. */ #ifndef __CONFIG_H @@ -443,17 +443,11 @@ /* * Environment Configuration */ - -/* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 02a5acf..57fc37b 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -438,13 +438,9 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 5e7bc49..7b3ddba 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -658,17 +658,11 @@ /* * Environment Configuration */ - -/* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD #define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD #endif #define CONFIG_IPADDR 192.168.1.254 diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index e6d570a..cae133b 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -300,7 +300,6 @@ #define CONFIG_ULI526X #ifdef CONFIG_ULI526X -#define CONFIG_ETHADDR 00:E0:0C:00:00:01 #endif /************************************************************ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 9f755e5..938874f 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -10,7 +10,7 @@ * MPC8641HPCN board configuration file * * Make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + * search for CONFIG_SERVERIP, etc. in this file. */ #ifndef __CONFIG_H @@ -679,14 +679,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * Environment Configuration */ -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_ETHADDR 00:E0:0C:00:00:01 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD -#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD -#endif - #define CONFIG_HAS_ETH0 1 #define CONFIG_HAS_ETH1 1 #define CONFIG_HAS_ETH2 1 diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 3c67655..00589b7 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -165,7 +165,6 @@ "setenv bootargs ${bootargs} no_ethaddr;" \ "fi\0" \ "hostname=CPUP0\0" \ - "ethaddr=00:00:00:00:00:00\0" \ "netdev=eth0\0" \ "bootcmd=run bootcmd_nor\0" \ "" diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index 2e0e922..0d9fe57 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -73,8 +73,6 @@ #define CONFIG_GATEWAYIP 192.168.233.1 #define CONFIG_SERVERIP 192.168.233.53 #define CONFIG_ROOTPATH "/romfs/brettl2" -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND #endif diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 50e85ca..dcd19e4 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -87,8 +87,6 @@ #endif #define CONFIG_HOSTNAME bf518f-ezbrd #define CONFIG_PHY_ADDR 3 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 7fc882a..ad5fa53 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -85,8 +85,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME bf526-ezbrd -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 79e440a..b23a250 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -83,8 +83,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME bf527-ezkit -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index 0fda967..1b7290e 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -75,8 +75,6 @@ SSYNC(); \ } while (0) #define CONFIG_HOSTNAME bf533-ezkit -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index ae4d83a..322705d 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -68,8 +68,6 @@ SSYNC(); \ } while (0) #define CONFIG_HOSTNAME bf533-stamp -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ /* I2C */ diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 6df89af..e705d08 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -86,8 +86,6 @@ #define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_ROOTPATH "/romfs" -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:42 */ #define CONFIG_LIB_RAND @@ -133,7 +131,6 @@ #define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_MISC_INIT_R #define CONFIG_BAUDRATE 57600 #define CONFIG_UART_CONSOLE 0 diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index 4f2b2cb..be11a85 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -65,8 +65,6 @@ #define CONFIG_RMII #endif #define CONFIG_HOSTNAME bf537-pnav -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:24:21:18 */ #define CONFIG_LIB_RAND /* @@ -150,7 +148,6 @@ * Misc Settings */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index d01d88f..9a7edf3 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -86,8 +86,6 @@ #define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_ROOTPATH "/romfs" -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:42 */ #define CONFIG_LIB_RAND /* @@ -132,7 +130,6 @@ #define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_MISC_INIT_R #define CONFIG_BAUDRATE 115200 #define CONFIG_UART_CONSOLE 0 diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 7b5a5a7..41f1b1f 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -65,8 +65,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME bf537-stamp -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index e60558e..3c82bf2 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -63,8 +63,6 @@ #define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x20310300 #define CONFIG_HOSTNAME bf538f-ezkit -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index e71e6d3..53f6558 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -73,8 +73,6 @@ #define CONFIG_SMC911X_BASE 0x24000000 #define CONFIG_SMC911X_16_BIT #define CONFIG_HOSTNAME bf548-ezkit -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 6871d8c..03f3cec 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -92,9 +92,6 @@ #define CONFIG_HOSTNAME bf561-acvilon -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - /* * Flash Settings diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index fb6f948..efbc6c2 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -64,8 +64,6 @@ #define CONFIG_SMC91111_BASE 0x2C010300 #define CONFIG_SMC_USE_32_BIT 1 #define CONFIG_HOSTNAME bf561-ezkit -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 7de4253..28bc653 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -76,9 +76,6 @@ #define CONFIG_HOSTNAME blackstamp #define CONFIG_ROOTPATH "/checkout/uClinux-dist/romfs" #define CONFIG_SYS_AUTOLOAD "no" - -/* To remove hardcoding and enable MAC storage in EEPROM */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ #endif #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h index 6e5774c..27dccf6 100644 --- a/include/configs/blackvme.h +++ b/include/configs/blackvme.h @@ -85,9 +85,6 @@ #define CFG_AUTOLOAD "no" #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING -#define CONFIG_ENV_OVERWRITE 1 /* enable changing MAC at runtime */ -/* Comment out hardcoded MAC to enable MAC storage in EEPROM */ -/* # define CONFIG_ETHADDR ff:ee:dd:cc:bb:aa */ /* * SDRAM settings & memory map diff --git a/include/configs/br4.h b/include/configs/br4.h index 48cf184..a44c18c 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -69,9 +69,6 @@ #endif #define CONFIG_HOSTNAME br4 #define CONFIG_TFTP_BLOCKSIZE 4404 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 5c:38:1a:80:a7:00 */ - /* * Flash Settings diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index 643c837..387f1cb 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -83,8 +83,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME cm-bf527 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index 485f01a..a464785 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -66,8 +66,6 @@ #define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x20200300 #define CONFIG_HOSTNAME cm-bf533 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index e059568..95afd51 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -71,8 +71,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME cm-bf537e -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 1f26457..4df4a05 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -69,8 +69,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME cm-bf537u -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 72eafc5..cde23ad 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -76,8 +76,6 @@ #define CONFIG_SMC911X_BASE 0x24000000 #define CONFIG_SMC911X_16_BIT #define CONFIG_HOSTNAME cm-bf548 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:24:31:91 */ /* diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 96910a7..9d8a2c6 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -67,8 +67,6 @@ #define CONFIG_SMC911X_BASE 0x24008000 /* AMS1 */ #define CONFIG_SMC911X_16_BIT #define CONFIG_HOSTNAME cm-bf561 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:cf */ /* diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 38fcc40..11dd4d7 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -177,7 +177,6 @@ considered during boot */ /* User network settings */ -#define CONFIG_ETHADDR 00:00:00:00:00:09 /* default ethernet MAC addr. */ #define CONFIG_IPADDR 192.168.100.2 /* default board IP address */ #define CONFIG_SERVERIP 192.168.100.1 /* default tftp server IP address */ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 414600a..804291d 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -50,8 +50,7 @@ /* NAND support */ #define CONFIG_CMD_NAND -#define CONFIG_NAND_VF610_NFC -#define CONFIG_SYS_NAND_SELF_INIT +#define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 56317ef..70aa699 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -37,8 +37,6 @@ #endif #endif -#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ - #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/ea20.h b/include/configs/ea20.h index ae89368..fc02b30 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -242,7 +242,6 @@ "rootpath=/opt/eldk/arm\0" \ "splashpos=230,180\0" \ "testrfspath=/opt/eldk/test_arm\0" \ - "tempmac=setenv ethaddr 02:ea:20:ff:ff:ff\0" \ "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \ "ubi.mtd=${as} root=ubi0:rootfs\0" \ "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \ @@ -315,6 +314,6 @@ "fi;" \ "else echo U-Boot not downloaded..exiting;fi\0" \ "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \ - "bootcmd=run tempmac;run net_testrfs\0" + "bootcmd=run net_testrfs\0" #endif /* __CONFIG_H */ diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h index 854807d..5d28d8b 100644 --- a/include/configs/gr_cpci_ax2000.h +++ b/include/configs/gr_cpci_ax2000.h @@ -280,7 +280,6 @@ /*#define CONFIG_SHOW_ACTIVITY*/ #define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ -#define CONFIG_ETHADDR 00:00:7a:cc:00:13 #define CONFIG_PHY_ADDR 0x00 /* diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h index ed2dd2a..7c320ee 100644 --- a/include/configs/gr_ep2s60.h +++ b/include/configs/gr_ep2s60.h @@ -260,16 +260,6 @@ /* USE GRETH Ethernet Driver */ #define CONFIG_GRETH 1 -/* Default GRETH Ethernet HARDWARE address */ -#define GRETH_HWADDR_0 0x00 -#define GRETH_HWADDR_1 0x00 -#define GRETH_HWADDR_2 0x7a -#define GRETH_HWADDR_3 0xcc -#define GRETH_HWADDR_4 0x00 -#define GRETH_HWADDR_5 0x13 -#endif - -#define CONFIG_ETHADDR 00:00:7a:cc:00:13 #define CONFIG_PHY_ADDR 0x00 /* diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h index e3cbb6f..fdd0aa5 100644 --- a/include/configs/gr_xc3s_1500.h +++ b/include/configs/gr_xc3s_1500.h @@ -220,15 +220,6 @@ */ #define CONFIG_GRETH 1 -/* Default GRETH Ethernet HARDWARE address */ -#define GRETH_HWADDR_0 0x00 -#define GRETH_HWADDR_1 0x00 -#define GRETH_HWADDR_2 0x7a -#define GRETH_HWADDR_3 0xcc -#define GRETH_HWADDR_4 0x00 -#define GRETH_HWADDR_5 0x12 - -#define CONFIG_ETHADDR 00:00:7a:cc:00:12 #define CONFIG_PHY_ADDR 0x00 /* diff --git a/include/configs/grsim.h b/include/configs/grsim.h index 1e089a9..21b4f5e 100644 --- a/include/configs/grsim.h +++ b/include/configs/grsim.h @@ -94,7 +94,6 @@ "rootpath=/export/roofs\0" \ "scratch=40000000\0" \ "getkernel=tftpboot $(scratch) $(bootfile)\0" \ - "ethaddr=00:00:7A:CC:00:12\0" \ "bootargs=console=ttyS0,38400" \ "" #define CONFIG_NETMASK 255.255.255.0 @@ -243,16 +242,6 @@ */ #define CONFIG_GRETH 1 -/* Default HARDWARE address */ -#define GRETH_HWADDR_0 0x00 -#define GRETH_HWADDR_1 0x00 -#define GRETH_HWADDR_2 0x7A -#define GRETH_HWADDR_3 0xcc -#define GRETH_HWADDR_4 0x00 -#define GRETH_HWADDR_5 0x12 - -#define CONFIG_ETHADDR 00:00:7a:cc:00:12 - /* * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s */ diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h index 66194a8..f050754 100644 --- a/include/configs/grsim_leon2.h +++ b/include/configs/grsim_leon2.h @@ -91,7 +91,6 @@ "rootpath=/export/roofs\0" \ "scratch=40000000\0" \ "getkernel=tftpboot $(scratch) $(bootfile)\0" \ - "ethaddr=00:00:7A:CC:00:12\0" \ "bootargs=console=ttyS0,38400" \ "" #define CONFIG_NETMASK 255.255.255.0 @@ -241,16 +240,6 @@ */ /*#define CONFIG_GRETH 1*/ -/* Default HARDWARE address */ -#define GRETH_HWADDR_0 0x00 -#define GRETH_HWADDR_1 0x00 -#define GRETH_HWADDR_2 0x7A -#define GRETH_HWADDR_3 0xcc -#define GRETH_HWADDR_4 0x00 -#define GRETH_HWADDR_5 0x12 - -#define CONFIG_ETHADDR 00:00:7a:cc:00:12 - /* * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s */ diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index 2a937c6..4757929 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -64,8 +64,6 @@ #define CONFIG_DRIVER_AX88180 1 #define AX88180_BASE 0x2c000000 #define CONFIG_HOSTNAME ibf-dsp561 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index f321975..9258734 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -110,9 +110,6 @@ #undef CONFIG_BOOTARGS -#define CONFIG_ETHADDR 00:a0:a4:03:00:00 -#define CONFIG_OVERWRITE_ETHADDR_ONCE - #define CONFIG_IPADDR 192.168.100.2 #define CONFIG_SERVERIP 192.168.100.1 #define CONFIG_NETMASK 255.255.255.0 diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 2ee215f..2bd81fc 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -131,7 +131,6 @@ * Misc Settings */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_MISC_INIT_R /* needed for MAC address */ #define CONFIG_UART_CONSOLE 0 #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 9a8fd50..1a41a2f 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -124,7 +124,7 @@ unsigned long get_board_ddr_clk(void); #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x67f80000 +#define CONFIG_SYS_TEXT_BASE 0x60100000 #endif #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 729205f..8ea428e 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -35,6 +35,29 @@ #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 100000000 +#define DDR_SDRAM_CFG 0x470c0008 +#define DDR_CS0_BNDS 0x008000bf +#define DDR_CS0_CONFIG 0x80014302 +#define DDR_TIMING_CFG_0 0x50550004 +#define DDR_TIMING_CFG_1 0xbcb38c56 +#define DDR_TIMING_CFG_2 0x0040d120 +#define DDR_TIMING_CFG_3 0x010e1000 +#define DDR_TIMING_CFG_4 0x00000001 +#define DDR_TIMING_CFG_5 0x03401400 +#define DDR_SDRAM_CFG_2 0x00401010 +#define DDR_SDRAM_MODE 0x00061c60 +#define DDR_SDRAM_MODE_2 0x00180000 +#define DDR_SDRAM_INTERVAL 0x18600618 +#define DDR_DDR_WRLVL_CNTL 0x8655f605 +#define DDR_DDR_WRLVL_CNTL_2 0x05060607 +#define DDR_DDR_WRLVL_CNTL_3 0x05050505 +#define DDR_DDR_CDR1 0x80040000 +#define DDR_DDR_CDR2 0x00000001 +#define DDR_SDRAM_CLK_CNTL 0x02000000 +#define DDR_DDR_ZQ_CNTL 0x89080600 +#define DDR_CS0_CONFIG_2 0 +#define DDR_SDRAM_CFG_MEM_EN 0x80000000 + #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg #endif @@ -73,7 +96,7 @@ #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x67f80000 +#define CONFIG_SYS_TEXT_BASE 0x60100000 #endif #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index c354c29..490f84e 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -37,7 +37,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_SHOW_BOOT_PROGRESS -#define CONFIG_RANDOM_MACADDR #define CONFIG_LIB_RAND #define CONFIG_KIRKWOOD_GPIO #define CONFIG_OF_LIBFDT diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 166ab4f..b84eead 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -350,7 +350,6 @@ #define CONFIG_IPADDR 192.168.0.3 #define CONFIG_SERVERIP 192.168.0.5 #define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD /* architecture dependent code */ #define CONFIG_SYS_USR_EXCEP /* user exception */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index e8b0593..4d648c8 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -85,8 +85,6 @@ #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_ETHADDR 00:50:C2:40:10:00 -#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ /* diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h index 3030054..2082679 100644 --- a/include/configs/omap3_cairo.h +++ b/include/configs/omap3_cairo.h @@ -90,7 +90,6 @@ "machid=ffffffff\0" \ "fdt_high=0x87000000\0" \ "baudrate=115200\0" \ - "ethaddr=00:50:C2:7E:90:F0\0" \ "fec_addr=00:50:C2:7E:90:F0\0" \ "netmask=255.255.255.0\0" \ "ipaddr=192.168.2.9\0" \ diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index a1926bb..2508702 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -31,8 +31,6 @@ #endif #endif -#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ - #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/pr1.h b/include/configs/pr1.h index 13fb675..b9253b9 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -69,8 +69,6 @@ #endif #define CONFIG_HOSTNAME pr1 #define CONFIG_TFTP_BLOCKSIZE 4404 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ /* diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index f5361d1..3a857e2 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -153,6 +153,11 @@ #define CONFIG_CMD_SANDBOX +#define CONFIG_CMD_ENV_FLAGS +#define CONFIG_CMD_ENV_CALLBACK +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_ASKENV + #define CONFIG_BOOTARGS "" #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index 69dc210..11bf504 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -102,7 +102,6 @@ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ -#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ #define CONFIG_IPADDR 192.168.193.102 #define CONFIG_NETMASK 255.255.255.224 #define CONFIG_SERVERIP 192.168.193.119 diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index aee0d9e..5b373cb 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -581,13 +581,9 @@ /* * Environment Configuration */ - -/* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 02:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD #endif #define CONFIG_IPADDR 192.168.0.55 diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 8eb7276..021da50 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -14,7 +14,7 @@ * SBC8641D board configuration file * * Make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + * search for CONFIG_SERVERIP, etc in this file. */ #ifndef __CONFIG_H @@ -528,14 +528,6 @@ * Environment Configuration */ -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_ETHADDR 02:E0:0C:00:00:01 -#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD -#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD -#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD -#endif - #define CONFIG_HAS_ETH0 1 #define CONFIG_HAS_ETH1 1 #define CONFIG_HAS_ETH2 1 diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index f4a40bb..6cac99e 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -50,7 +50,6 @@ #define CONFIG_BOOTARGS "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328" #define CONFIG_BOOTCOMMAND "bootm 10040000" #define CONFIG_SHOW_BOOT_PROGRESS -#define CONFIG_ETHADDR 80:81:82:83:84:85 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 10.10.10.9 #define CONFIG_SERVERIP 10.10.10.10 diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index b6a5e6a..623be7d 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -100,15 +100,6 @@ #if defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store env in memory only */ #define CONFIG_ENV_SIZE (8 << 10) -/* - * In RAM-booting version, we have no environment storage. So we need to - * provide at least preliminary MAC addresses for the 4xx EMAC driver to - * register the interfaces. Those two addresses are generated via the - * tools/gen_eth_addr tool and should only be used in a closed laboratory - * environment. - */ -#define CONFIG_ETHADDR 4a:56:49:22:3e:43 -#define CONFIG_ETH1ADDR 02:93:53:d5:06:98 #else #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environ vars */ #endif diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 5fb40eb..a0817a0 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -13,7 +13,7 @@ /* mpc8560ads board configuration file */ /* please refer to doc/README.mpc85xx for more info */ /* make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file + * search for CONFIG_SERVERIP, etc. in this file */ #ifndef __CONFIG_H @@ -342,14 +342,10 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #endif -/*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:e0:0c:07:9b:8c #endif #define CONFIG_SERVERIP 192.168.85.1 diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 914d821..78ac080 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -13,7 +13,7 @@ /* mpc8560ads board configuration file */ /* please refer to doc/README.mpc85xx for more info */ /* make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file + * search for CONFIG_SERVERIP, etc. in this file */ #ifndef __CONFIG_H @@ -377,14 +377,10 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #endif -/*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:e0:0c:07:9b:8c #endif /* diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 2d6b815..d829899 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -66,6 +66,9 @@ # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE #endif +/* CPU */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define CONFIG_SYS_INIT_RAM_ADDR 0x0 @@ -98,6 +101,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG +#define CONFIG_SERIAL_TAG /* mmc config */ #if !defined(CONFIG_UART0_PORT_F) @@ -240,6 +244,8 @@ extern int soft_i2c_gpio_scl; #endif #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" +#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) +#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" #else @@ -335,7 +341,7 @@ extern int soft_i2c_gpio_scl; /* Enable pre-console buffer to get complete log on the VGA console */ #define CONFIG_PRE_CONSOLE_BUFFER -#define CONFIG_PRE_CON_BUF_SZ (1024 * 1024) +#define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */ /* Use the room between the end of bootm_size and the framebuffer */ #define CONFIG_PRE_CON_BUF_ADDR 0x4f000000 diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index e96a742..e726b29 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -66,8 +66,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME tcm-bf518 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* @@ -111,7 +109,6 @@ * Misc Settings */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 42129fb..3326580 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -71,8 +71,6 @@ #define CONFIG_NETCONSOLE 1 #endif #define CONFIG_HOSTNAME tcm-bf537 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ #define CONFIG_LIB_RAND /* diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index d4688c5..331df62 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -209,7 +209,6 @@ /* * Network Configuration */ -#define CONFIG_ETHADDR 00:21:83:24:00:00 #define CONFIG_SERVERIP 192.168.11.1 #define CONFIG_IPADDR 192.168.11.10 #define CONFIG_GATEWAYIP 192.168.11.1 diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 7f6b0c7..688d60e 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -148,7 +148,6 @@ "netmask=255.255.0.0\0" \ "ipaddr=192.168.160.18\0" \ "serverip=192.168.1.1\0" \ - "ethaddr=00:e0:ee:00:05:2e\0" \ "bootfile=/tftpboot/v38b/uImage\0" \ "u-boot=/tftpboot/v38b/u-boot.bin\0" \ "" diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 05bc7d0..aa31041 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -48,12 +48,10 @@ /* NAND support */ #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS +#define CONFIG_SYS_NAND_ONFI_DETECTION #ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_VF610_NFC -#define CONFIG_SYS_NAND_SELF_INIT #define CONFIG_USE_ARCH_MEMCPY -#define CONFIG_SYS_NAND_BUSWIDTH_16BIT #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index dc8e99f..4725fc3 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -177,17 +177,6 @@ #define CONFIG_ENV_ADDR 0x80000100 /* - * Provide default ethernet address - * - * THIS IS NORMALLY NOT DONE. HERE WE KEEP WHAT WAS IN THE PORTED - * BOARD CONFIG IN CASE SOME PROVISIONING PROCESS OUT THERE EXPECTS - * THIS MAC ADDRESS WHEN THE DEVICE HAS STILL ITS DEFAULT CONFIG. - */ - -#define CONFIG_ETHADDR 00:12:B4:00:AF:FE -#define CONFIG_OVERWRITE_ETHADDR_ONCE - -/* * U-Boot Commands */ #include <config_cmd_default.h> diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 2999d1b..fcb76a2 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -70,7 +70,6 @@ #undef CONFIG_CMD_DTT -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.68.201 #define CONFIG_SERVERIP 192.168.68.62 diff --git a/include/configs/zeus.h b/include/configs/zeus.h index 4d7a7fc..9ac4a0f 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -296,8 +296,6 @@ #define CONFIG_IPADDR 192.168.1.10 #define CONFIG_SERVERIP 192.168.1.100 #define CONFIG_GATEWAYIP 192.168.1.100 -#define CONFIG_ETHADDR 50:00:00:00:06:00 -#define CONFIG_ETH1ADDR 50:00:00:00:06:01 #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 926b381..be77e50 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -25,6 +25,11 @@ # define CONFIG_SYS_PL310_BASE 0xf8f02000 #endif +#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600 +#define CONFIG_SYS_TIMERBASE ZYNQ_SCUTIMER_BASEADDR +#define CONFIG_SYS_TIMER_COUNTS_DOWN +#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4) + /* Serial drivers */ #define CONFIG_BAUDRATE 115200 /* The following table includes the supported baudrates */ diff --git a/include/dm/test.h b/include/dm/test.h index f03fbcb..a4bc5c8 100644 --- a/include/dm/test.h +++ b/include/dm/test.h @@ -8,7 +8,7 @@ #define __DM_TEST_H #include <dm.h> -#include <malloc.h> +#include <test/test.h> /** * struct dm_test_cdata - configuration data for test instance @@ -124,7 +124,7 @@ struct dm_test_perdev_uc_pdata { */ extern int dm_testdrv_op_count[DM_TEST_OP_COUNT]; -extern struct dm_test_state global_test_state; +extern struct unit_test_state global_dm_test_state; /* * struct dm_test_state - Entire state of dm test system @@ -133,7 +133,6 @@ extern struct dm_test_state global_test_state; * * @root: Root device * @testdev: Test device - * @fail_count: Number of tests that failed * @force_fail_alloc: Force all memory allocs to fail * @skip_post_probe: Skip uclass post-probe processing * @removed: Used to keep track of a device that was removed @@ -141,11 +140,9 @@ extern struct dm_test_state global_test_state; struct dm_test_state { struct udevice *root; struct udevice *testdev; - int fail_count; int force_fail_alloc; int skip_post_probe; struct udevice *removed; - struct mallinfo start; }; /* Test flags for each test */ @@ -155,26 +152,8 @@ enum { DM_TESTF_SCAN_FDT = 1 << 2, /* scan device tree */ }; -/** - * struct dm_test - Information about a driver model test - * - * @name: Name of test - * @func: Function to call to perform test - * @flags: Flags indicated pre-conditions for test - */ -struct dm_test { - const char *name; - int (*func)(struct dm_test_state *dms); - int flags; -}; - /* Declare a new driver model test */ -#define DM_TEST(_name, _flags) \ - ll_entry_declare(struct dm_test, _name, dm_test) = { \ - .name = #_name, \ - .flags = _flags, \ - .func = _name, \ - } +#define DM_TEST(_name, _flags) UNIT_TEST(_name, _flags, dm_test) /* Declare ping methods for the drivers */ int test_ping(struct udevice *dev, int pingval, int *pingret); @@ -191,7 +170,7 @@ int testfdt_ping(struct udevice *dev, int pingval, int *pingret); * @priv: Pointer to private test information * @return 0 if OK, -ve on error */ -int dm_check_operations(struct dm_test_state *dms, struct udevice *dev, +int dm_check_operations(struct unit_test_state *uts, struct udevice *dev, uint32_t base, struct dm_test_priv *priv); /** @@ -201,7 +180,7 @@ int dm_check_operations(struct dm_test_state *dms, struct udevice *dev, * @num_devices: Number of test devices to check * @return 0 if OK, -ve on error */ -int dm_check_devices(struct dm_test_state *dms, int num_devices); +int dm_check_devices(struct unit_test_state *uts, int num_devices); /** * dm_leak_check_start() - Prepare to check for a memory leak @@ -211,7 +190,7 @@ int dm_check_devices(struct dm_test_state *dms, int num_devices); * * @dms: Overall test state */ -void dm_leak_check_start(struct dm_test_state *dms); +void dm_leak_check_start(struct unit_test_state *uts); /** * dm_leak_check_end() - Check that no memory has leaked @@ -221,17 +200,6 @@ void dm_leak_check_start(struct dm_test_state *dms); * it sees a different amount of total memory allocated than before. * * @dms: Overall test state - */int dm_leak_check_end(struct dm_test_state *dms); - - -/** - * dm_test_main() - Run all or one of the tests - * - * This runs all available driver model tests, or a selected one - * - * @test_name: Name of test to run, or NULL for all - * @return 0 if OK, -ve on error - */ -int dm_test_main(const char *test_name); + */int dm_leak_check_end(struct unit_test_state *uts); #endif diff --git a/include/env_attr.h b/include/env_attr.h index b82fec9..7bfb7f3 100644 --- a/include/env_attr.h +++ b/include/env_attr.h @@ -16,13 +16,14 @@ * attributes = [^,:\s]* * entry = name[:attributes] * list = entry[,list] - * It will call the "callback" function with the "name" and attribute as "value" + * It will call the "callback" function with the "name" and "attributes" * The callback may return a non-0 to abort the list walk. * This return value will be passed through to the caller. * 0 is returned on success. */ -extern int env_attr_walk(const char *attr_list, - int (*callback)(const char *name, const char *value)); +int env_attr_walk(const char *attr_list, + int (*callback)(const char *name, const char *attributes, void *priv), + void *priv); /* * env_attr_lookup takes as input an "attr_list" with the same form as above. @@ -33,7 +34,6 @@ extern int env_attr_walk(const char *attr_list, * "attr_list" is NULL. * Returns 0 on success. */ -extern int env_attr_lookup(const char *attr_list, const char *name, - char *attributes); +int env_attr_lookup(const char *attr_list, const char *name, char *attributes); #endif /* __ENV_ATTR_H__ */ diff --git a/include/env_callback.h b/include/env_callback.h index ab4e115..ab5d42d 100644 --- a/include/env_callback.h +++ b/include/env_callback.h @@ -31,14 +31,41 @@ #define SPLASHIMAGE_CALLBACK #endif +#ifdef CONFIG_REGEX +#define ENV_DOT_ESCAPE "\\" +#else +#define ENV_DOT_ESCAPE +#endif + +#ifdef CONFIG_CMD_DNS +#define DNS_CALLBACK "dnsip:dnsip," +#else +#define DNS_CALLBACK +#endif + +#ifdef CONFIG_NET +#define NET_CALLBACKS \ + "bootfile:bootfile," \ + "ipaddr:ipaddr," \ + "gatewayip:gatewayip," \ + "netmask:netmask," \ + "serverip:serverip," \ + "nvlan:nvlan," \ + "vlan:vlan," \ + DNS_CALLBACK \ + "eth\\d?addr:ethaddr," +#else +#define NET_CALLBACKS +#endif + /* * This list of callback bindings is static, but may be overridden by defining * a new association in the ".callbacks" environment variable. */ -#define ENV_CALLBACK_LIST_STATIC ENV_CALLBACK_VAR ":callbacks," \ - ENV_FLAGS_VAR ":flags," \ +#define ENV_CALLBACK_LIST_STATIC ENV_DOT_ESCAPE ENV_CALLBACK_VAR ":callbacks," \ + ENV_DOT_ESCAPE ENV_FLAGS_VAR ":flags," \ "baudrate:baudrate," \ - "bootfile:bootfile," \ + NET_CALLBACKS \ "loadaddr:loadaddr," \ SILENT_CALLBACK \ SPLASHIMAGE_CALLBACK \ diff --git a/include/env_default.h b/include/env_default.h index 90431be..3096576 100644 --- a/include/env_default.h +++ b/include/env_default.h @@ -49,24 +49,6 @@ const uchar default_environment[] = { #ifdef CONFIG_LOADS_ECHO "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0" #endif -#ifdef CONFIG_ETHADDR - "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" -#endif -#ifdef CONFIG_ETH1ADDR - "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" -#endif -#ifdef CONFIG_ETH2ADDR - "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" -#endif -#ifdef CONFIG_ETH3ADDR - "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0" -#endif -#ifdef CONFIG_ETH4ADDR - "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0" -#endif -#ifdef CONFIG_ETH5ADDR - "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0" -#endif #ifdef CONFIG_ETHPRIME "ethprime=" CONFIG_ETHPRIME "\0" #endif diff --git a/include/env_flags.h b/include/env_flags.h index 3ef6311..2d2de88 100644 --- a/include/env_flags.h +++ b/include/env_flags.h @@ -38,17 +38,31 @@ enum env_flags_varaccess { #endif #ifdef CONFIG_CMD_NET +#ifdef CONFIG_REGEX +#define ETHADDR_WILDCARD "\\d?" +#else +#define ETHADDR_WILDCARD +#endif #ifdef CONFIG_ENV_OVERWRITE -#define ETHADDR_FLAGS "ethaddr:ma," +#define ETHADDR_FLAGS "eth" ETHADDR_WILDCARD "addr:ma," #else #ifdef CONFIG_OVERWRITE_ETHADDR_ONCE -#define ETHADDR_FLAGS "ethaddr:mc," +#define ETHADDR_FLAGS "eth" ETHADDR_WILDCARD "addr:mc," #else -#define ETHADDR_FLAGS "ethaddr:mo," +#define ETHADDR_FLAGS "eth" ETHADDR_WILDCARD "addr:mo," #endif #endif +#define NET_FLAGS \ + "ipaddr:i," \ + "gatewayip:i," \ + "netmask:i," \ + "serverip:i," \ + "nvlan:i," \ + "vlan:i," \ + "dnsip:i," #else -#define ETHADDR_FLAGS "" +#define ETHADDR_FLAGS +#define NET_FLAGS #endif #ifndef CONFIG_ENV_OVERWRITE @@ -59,6 +73,7 @@ enum env_flags_varaccess { #define ENV_FLAGS_LIST_STATIC \ ETHADDR_FLAGS \ + NET_FLAGS \ SERIAL_FLAGS \ CONFIG_ENV_FLAGS_LIST_STATIC diff --git a/include/fsl_immap.h b/include/fsl_immap.h index d63cc19..e4addad 100644 --- a/include/fsl_immap.h +++ b/include/fsl_immap.h @@ -87,9 +87,7 @@ struct ccsr_ddr { u32 timing_cfg_9; /* SDRAM Timing Configuration 9 */ u8 res_258[0x260-0x258]; u32 sdram_cfg_3; - u8 res_264[0x2a0-0x264]; - u32 deskew_cntl; - u8 res_2a4[0x400-0x2a4]; + u8 res_264[0x400-0x264]; u32 dq_map_0; u32 dq_map_1; u32 dq_map_2; diff --git a/include/search.h b/include/search.h index 9701efb..343dbc3 100644 --- a/include/search.h +++ b/include/search.h @@ -120,5 +120,7 @@ extern int hwalk_r(struct hsearch_data *__htab, int (*callback)(ENTRY *)); #define H_MATCH_SUBSTR (1 << 7) /* search for substring matches */ #define H_MATCH_REGEX (1 << 8) /* search for regular expression matches */ #define H_MATCH_METHOD (H_MATCH_IDENT | H_MATCH_SUBSTR | H_MATCH_REGEX) +#define H_PROGRAMMATIC (1 << 9) /* indicate that an import is from setenv() */ +#define H_ORIGIN_FLAGS (H_INTERACTIVE | H_PROGRAMMATIC) #endif /* search.h */ diff --git a/include/test/env.h b/include/test/env.h new file mode 100644 index 0000000..2b0cd68 --- /dev/null +++ b/include/test/env.h @@ -0,0 +1,16 @@ +/* + * (C) Copyright 2015 + * Joe Hershberger, National Instruments, joe.hershberger@ni.com + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __TEST_ENV_H__ +#define __TEST_ENV_H__ + +#include <test/test.h> + +/* Declare a new environment test */ +#define ENV_TEST(_name, _flags) UNIT_TEST(_name, _flags, env_test) + +#endif /* __TEST_ENV_H__ */ diff --git a/include/test/suites.h b/include/test/suites.h new file mode 100644 index 0000000..f579033 --- /dev/null +++ b/include/test/suites.h @@ -0,0 +1,15 @@ +/* + * (C) Copyright 2015 + * Joe Hershberger, National Instruments, joe.hershberger@ni.com + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __TEST_SUITES_H__ +#define __TEST_SUITES_H__ + +int do_ut_dm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +int do_ut_env(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +int do_ut_time(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); + +#endif /* __TEST_SUITES_H__ */ diff --git a/include/test/test.h b/include/test/test.h new file mode 100644 index 0000000..b7e1ae2 --- /dev/null +++ b/include/test/test.h @@ -0,0 +1,47 @@ +/* + * Copyright (c) 2013 Google, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __TEST_TEST_H +#define __TEST_TEST_H + +#include <malloc.h> + +/* + * struct unit_test_state - Entire state of test system + * + * @fail_count: Number of tests that failed + * @start: Store the starting mallinfo when doing leak test + * @priv: A pointer to some other info some suites want to track + */ +struct unit_test_state { + int fail_count; + struct mallinfo start; + void *priv; +}; + +/** + * struct unit_test - Information about a unit test + * + * @name: Name of test + * @func: Function to call to perform test + * @flags: Flags indicated pre-conditions for test + */ +struct unit_test { + const char *name; + int (*func)(struct unit_test_state *state); + int flags; +}; + +/* Declare a new unit test */ +#define UNIT_TEST(_name, _flags, _suite) \ + ll_entry_declare(struct unit_test, _name, _suite) = { \ + .name = #_name, \ + .flags = _flags, \ + .func = _name, \ + } + + +#endif /* __TEST_TEST_H */ diff --git a/include/dm/ut.h b/include/test/ut.h index ec61465..5e5aa6c 100644 --- a/include/dm/ut.h +++ b/include/test/ut.h @@ -1,39 +1,39 @@ /* - * Simple unit test library for driver model + * Simple unit test library * * Copyright (c) 2013 Google, Inc * * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __DM_UT_H -#define __DM_UT_H +#ifndef __TEST_UT_H +#define __TEST_UT_H -struct dm_test_state; +struct unit_test_state; /** * ut_fail() - Record failure of a unit test * - * @dms: Test state + * @uts: Test state * @fname: Filename where the error occured * @line: Line number where the error occured * @func: Function name where the error occured * @cond: The condition that failed */ -void ut_fail(struct dm_test_state *dms, const char *fname, int line, +void ut_fail(struct unit_test_state *uts, const char *fname, int line, const char *func, const char *cond); /** * ut_failf() - Record failure of a unit test * - * @dms: Test state + * @uts: Test state * @fname: Filename where the error occured * @line: Line number where the error occured * @func: Function name where the error occured * @cond: The condition that failed * @fmt: printf() format string for the error, followed by args */ -void ut_failf(struct dm_test_state *dms, const char *fname, int line, +void ut_failf(struct unit_test_state *uts, const char *fname, int line, const char *func, const char *cond, const char *fmt, ...) __attribute__ ((format (__printf__, 6, 7))); @@ -41,16 +41,16 @@ void ut_failf(struct dm_test_state *dms, const char *fname, int line, /* Assert that a condition is non-zero */ #define ut_assert(cond) \ if (!(cond)) { \ - ut_fail(dms, __FILE__, __LINE__, __func__, #cond); \ - return -1; \ + ut_fail(uts, __FILE__, __LINE__, __func__, #cond); \ + return CMD_RET_FAILURE; \ } /* Assert that a condition is non-zero, with printf() string */ #define ut_assertf(cond, fmt, args...) \ if (!(cond)) { \ - ut_failf(dms, __FILE__, __LINE__, __func__, #cond, \ + ut_failf(uts, __FILE__, __LINE__, __func__, #cond, \ fmt, ##args); \ - return -1; \ + return CMD_RET_FAILURE; \ } /* Assert that two int expressions are equal */ @@ -58,10 +58,10 @@ void ut_failf(struct dm_test_state *dms, const char *fname, int line, unsigned int val1 = (expr1), val2 = (expr2); \ \ if (val1 != val2) { \ - ut_failf(dms, __FILE__, __LINE__, __func__, \ + ut_failf(uts, __FILE__, __LINE__, __func__, \ #expr1 " == " #expr2, \ "Expected %d, got %d", val1, val2); \ - return -1; \ + return CMD_RET_FAILURE; \ } \ } @@ -70,10 +70,10 @@ void ut_failf(struct dm_test_state *dms, const char *fname, int line, const char *val1 = (expr1), *val2 = (expr2); \ \ if (strcmp(val1, val2)) { \ - ut_failf(dms, __FILE__, __LINE__, __func__, \ + ut_failf(uts, __FILE__, __LINE__, __func__, \ #expr1 " = " #expr2, \ "Expected \"%s\", got \"%s\"", val1, val2); \ - return -1; \ + return CMD_RET_FAILURE; \ } \ } @@ -82,10 +82,10 @@ void ut_failf(struct dm_test_state *dms, const char *fname, int line, const void *val1 = (expr1), *val2 = (expr2); \ \ if (val1 != val2) { \ - ut_failf(dms, __FILE__, __LINE__, __func__, \ + ut_failf(uts, __FILE__, __LINE__, __func__, \ #expr1 " = " #expr2, \ "Expected %p, got %p", val1, val2); \ - return -1; \ + return CMD_RET_FAILURE; \ } \ } @@ -94,10 +94,10 @@ void ut_failf(struct dm_test_state *dms, const char *fname, int line, const void *val = (expr); \ \ if (val == NULL) { \ - ut_failf(dms, __FILE__, __LINE__, __func__, \ + ut_failf(uts, __FILE__, __LINE__, __func__, \ #expr " = NULL", \ "Expected non-null, got NULL"); \ - return -1; \ + return CMD_RET_FAILURE; \ } \ } |