diff options
Diffstat (limited to 'nand_spl/board/freescale/p1010rdb/nand_boot.c')
-rw-r--r-- | nand_spl/board/freescale/p1010rdb/nand_boot.c | 130 |
1 files changed, 130 insertions, 0 deletions
diff --git a/nand_spl/board/freescale/p1010rdb/nand_boot.c b/nand_spl/board/freescale/p1010rdb/nand_boot.c new file mode 100644 index 0000000..16eeb61 --- /dev/null +++ b/nand_spl/board/freescale/p1010rdb/nand_boot.c @@ -0,0 +1,130 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <common.h> +#include <mpc85xx.h> +#include <asm/io.h> +#include <ns16550.h> +#include <nand.h> +#include <asm/mmu.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_law.h> + +#define udelay(x) { int j; for (j = 0; j < x * 10000; j++) isync(); } + +unsigned long ddr_freq_mhz; + +void sdram_init(void) +{ + ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR; + + out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL | SDRAM_CFG_32_BE); + out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS); + out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG); + out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL_2); + out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT); + + if (ddr_freq_mhz < 700) { + out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3_667); + out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0_667); + out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1_667); + out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2_667); + out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1_667); + out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2_667); + out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL_667); + out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL_667); + out_be32(&ddr->ddr_wrlvl_cntl, + CONFIG_SYS_DDR_WRLVL_CONTROL_667); + } else { + out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3_800); + out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0_800); + out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1_800); + out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2_800); + out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1_800); + out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2_800); + out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL_800); + out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL_800); + out_be32(&ddr->ddr_wrlvl_cntl, + CONFIG_SYS_DDR_WRLVL_CONTROL_800); + } + + out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4); + out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5); + out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CONTROL); + + /* mimic 500us delay, with busy isync() loop */ + udelay(100); + + /* Let the controller go */ + out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN); + + set_next_law(CONFIG_SYS_NAND_DDR_LAW, LAW_SIZE_1G, LAW_TRGT_IF_DDR_1); +} + +void board_init_f(ulong bootflag) +{ + u32 plat_ratio, ddr_ratio; + unsigned long bus_clk; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + /* initialize selected port with appropriate baud rate */ + plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; + plat_ratio >>= 1; + bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + + ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO; + ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; + ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000; + + NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, + bus_clk / 16 / CONFIG_BAUDRATE); + + puts("\nNAND boot... "); + + /* Initialize the DDR3 */ + sdram_init(); + + /* copy code to RAM and jump to it - this should not return */ + /* NOTE - code has to be copied out of NAND buffer before + * other blocks can be read. + */ + relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0, + CONFIG_SYS_NAND_U_BOOT_RELOC); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + nand_boot(); +} + +void putc(char c) +{ + if (c == '\n') + NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); + + NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); +} + +void puts(const char *str) +{ + while (*str) + putc(*str++); +} |