summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-01fastboot: allow retrieving fastboot variables from envRob Herring
Some boards need to expose device specific variable through fastboot (to adpat the flashing script depending on hardware revision for example). Provide a way to expose custom fastboot variables. Note that all variables meant to be exposed through fastboot should be be prefixed with 'fastboot.', the variable should not exceed 32 bytes (including the prefix and the trailing '\0') and the variable content should fit in the response buffer (60 bytes excluding the 'OKAY' prefix and the trailing '\0'). Signed-off-by: Rob Herring <rob.herring@linaro.org> [Boris Brezillon: add a commit message] Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Steve Rae <srae@broadcom.com>
2016-04-01arm: clang: Update support slightlyTom Rini
- Move most of the flags required into LLVM_RELFLAGS to test at build time instead of requiring them to be passed in. - Update doc/README.clang to reflect this - Switch to rpi_2 as the example as it's closer to working out of the box than rpi is. Cc: Jeroen Hofstee <jeroen@myspectrum.nl> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-01Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2016-04-01sunxi: Reserve ATF memory space on A64Alexander Graf
On the A64 we usually boot with ATF running in EL3. ATF as it is available today resides in the first 16MB of RAM. So we should make sure we reserve that space in our memory maps. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Add Pine64+ supportSiarhei Siamashka
The Pine64+ is a system based on the Allwinner A64 SoC. It is capable of running AArch64 code and thus is the first of its kind for the sunxi target. This patch adds a defconfig and device tree chunks for it. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [agraf: Change patch description] Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Add support for Allwinner A64 SoCsSiarhei Siamashka
The Allwinner A64 SoC is used in the Pine64. This patch adds all bits necessary to compile U-Boot for it running in AArch64 mode. Unfortunately SPL is not ready yet due to legal problems, so we need to boot using the binary boot0 for now. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [agraf: remove SPL code, move to AArch64] Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Explicitly cast u32 pointer conversionsAlexander Graf
Some parts of the sunxi code cast explicitly between u32 values and pointers. This is not a problem in practice, because all 64bit SoCs today only use the lower 32 bits for their phyical address space. But we need to make sure that the compiler is sure this is not an accident as well. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Depend SPL configs on SUPPORT_SPLAlexander Graf
We currently depend SPL config options on specific machine types which doesn't scale. Fortunately there's already a kconfig variable that tells us whether we want to build SPL code at all, so just depend them on this. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Move cpu independent code to mach directoryAlexander Graf
Some of the code in arch/arm/cpu/armv7/sunxi is actually armv7 specific, while most of it is just generic code that could as well be used on an AArch64 SoC. Move all files that are not really tied to armv7 into a new mach-sunxi directory. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Enable USB nodes for H8Homlet v2Chen-Yu Tsai
This provides the minimal changes to the H8Homlet v2 dts to enable USB in U-boot. It is not what will be submitted to the kernel. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Enable USB on Cubietruck PlusChen-Yu Tsai
This provides the minimal changes to the Cubietruck Plus dts to enable USB in U-boot. It is not what will be submitted to the kernel. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Add USB and R_PIO nodes to sun8i-a83t.dtsiChen-Yu Tsai
This provides the minimal changes to the A83T dtsi to enable USB in U-boot. It is not what will be submitted to the kernel. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Cubietruck Plus: Enable USB Kconfig options in defconfigChen-Yu Tsai
The Cubietruck Plus uses all 3 USB controllers: - USB OTG functions are provided by the musb USB OTG controller - Onboard SATA is provied by a USB-SATA bridge connected to USB1 - The USB host ports on the board are provided by an HSIC USB hub FLDO1 is set to 1.2V for HSIC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: h8_homlet_v2: Enable USB Kconfig options in defconfigChen-Yu Tsai
The h8_homlet_v2 has 2 USB host ports, one connected to the OTG controller, one connected to the EHCI/OHCI pair. Also provide the card detect pin for MMC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31ARM: uniphier: remove CONFIG_ARP_TIMEOUT defineMasahiro Yamada
I no longer see the problem claimed in the comment block. Rather, the 0.5 msec timeout seems too short for some TFTP servers. Drop the CONFIG_ARM_TIMEOUT to fall back to the 5 sec timeout. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31cosmetic: Fix typos "privide"Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31ARM: uniphier: rename function names ph1_* to uniphier_*Masahiro Yamada
Eliminate the "ph1"_ prefixes from function names because "uniphier_" describes the SoC familiy better. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31ARM: uniphier: add pin-mux settings for NAND, eMMC, SD of PH1-sLD3Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31ARM: uniphier: enable eMMC on PH1-sLD3 reference boardMasahiro Yamada
On PH1-sLD3, eMMC and NAND are assigned to different I/O pins. Both devices can be enabled at the same time. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31ARM: uniphier: adjust dram_init() and dram_init_banksize() for ARM64Masahiro Yamada
Currently, these functions assume #address-cells and #size-cells are both one. Fix them to support 64bit DTB. Also, I am fixing a buffer overrun bug while I am here. The array size of gd->bd->bd_dram is CONFIG_NR_DRAM_BANKS. The number of iteration in the loop should be limited by that CONFIG. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31ARM: uniphier: drop unneeded defines related to legacy serial driverMasahiro Yamada
These defined were used for pre-DM ns16550 serial driver. They are unneeded because UniPhier SoCs now use DM serial. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31ARM: dts: uniphier: add NAND pinmux nodeMasahiro Yamada
This will be used to set up pin-muxing for the NAND controller. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31ARM: dts: uniphier: add clock-frequency to serial nodes of LD11/LD20Masahiro Yamada
Since no clock driver is implemented for peripherals in U-Boot yet, this property is needed for the serial driver to set up the divisor register. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31pinctrl: uniphier: support UniPhier PH1-LD11 pinctrl driverMasahiro Yamada
The pinmux of PH1-LD11 is almost a subset of that of PH1-LD20 (as far as used in boot-loader), so this commit makes the driver shared between the two SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31pinctrl: uniphier: support UniPhier PH1-LD20 pinctrl driverMasahiro Yamada
Add pin configuration and pinmux support for UniPhier PH1-LD20 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31pinctrl: uniphier: support per-pin input enable for new SoCsMasahiro Yamada
Upcoming new pinctrl drivers for PH1-LD11 and PH-LD20 support input signal gating for each pin. (While, existing ones only support it per pin-group.) This commit prepares the core part for that. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31pinctrl: uniphier: introduce capability flagMasahiro Yamada
The core part of the UniPhier pinctrl driver needs to support a new capability for upcoming UniPhier ARMv8 SoCs. This sometimes happens because pinctrl drivers include really SoC-specific stuff. This commit intends to tidy up SoC-specific parameters of the existing drivers before adding new ones. Having flags would be better than adding new members every time a new SoC-specific capability comes up. At this time, there is one flag, UNIPHIER_PINCTRL_CAPS_DBGMUX_SEPARATE. This capability (I'd say rather quirk) was added for PH1-Pro4 and PH1-Pro5 as requirement from our customer. For those SoCs, one pin-mux setting is controlled by the combination of two separate registers; the LSB bits at register offset (8 * N) and the MSB bits at (8 * N + 4). Because it is impossible to update two separate registers atomically, the LOAD_PINCTRL register should be set in order to make the pin-mux settings really effective. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31pinctrl: uniphier: use devm_get_addr() to get base addressMasahiro Yamada
Currently, fdtdec_get_addr_size() does not support the address translation, so it cannot handle device trees with non-straight "ranges" properties. (This would be a problem with DTS for UniPhier ARMv8 SoCs.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31mmc: uniphier: use devm_get_addr() to get base addressMasahiro Yamada
Currently, fdtdec_get_addr_size() does not support the address translation, so it cannot handle device trees with non-straight "ranges" properties. (This would be a problem with DTS for UniPhier ARMv8 SoCs.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31gpio: uniphier: use devm_get_addr() to get base addressMasahiro Yamada
Currently, fdtdec_get_addr_size() does not support the address translation, so it cannot handle device trees with non-straight "ranges" properties. (This would be a problem with DTS for UniPhier ARMv8 SoCs.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31i2c: uniphier: use devm_get_addr() to get base addressMasahiro Yamada
Currently, fdtdec_get_addr_size() does not support the address translation, so it cannot handle device trees with non-straight "ranges" properties. (This would be a problem with DTS for UniPhier ARMv8 SoCs.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31clk: uniphier: use devm_get_addr() to get base addressMasahiro Yamada
Currently, fdtdec_get_addr_size() does not support the address translation, so it cannot handle device trees with non-straight "ranges" properties. (This would be a problem with DTS for UniPhier ARMv8 SoCs.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31serial: uniphier: use devm_get_addr() to get base addressMasahiro Yamada
Currently, fdtdec_get_addr_size() does not support the address translation, so it cannot handle device trees with non-straight "ranges" properties. (This would be a problem with DTS for UniPhier ARMv8 SoCs.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31ARM: uniphier: add sramupdate commandMasahiro Yamada
This command would be useful to update U-Boot images in SRAM. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31ARM: uniphier: make u-boot-with-spl.bin really availableMasahiro Yamada
Commit d085ecd61b99 ("ARM: uniphier: switch to raw U-Boot image") claimed that u-boot-with-spl.bin would be useful in its commit log, but it was not available because the commit missed to define CONFIG_SPL_MAX_SIZE. Without it, CONFIG_SPL_PAD_TO is not defined either (see include/config_fallbacks.h). So, the SPL image is not padded correctly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31mtd: nand: denali: max_banks calculation changed in revision 5.1Graham Moore
Read Denali hardware revision number and use it to calculate max_banks, The encoding of max_banks changed in Denali revision 5.1. [ Linux commit : 271707b1d817f5104e02b2bd1bab43f0c8759418 ] Signed-off-by: Graham Moore <grmoore@opensource.altera.com> [Brian: parentheses around macro arg] Signed-off-by: Brian Norris <computersforpeace@gmail.com> [Masahiro: import from Linux and adjust ioread32() to readl() ] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-31sunxi: ohci: Add A83T compatibleChen-Yu Tsai
We have a separate compatible for almost each SoC. Add one for the A83T. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31sunxi: ehci: Add A83T compatibleChen-Yu Tsai
We have a separate compatible for almost each SoC. Add one for the A83T. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31sunxi: clk: Fix USB PHY clock macros for A83TChen-Yu Tsai
The A83T has 3 PHYs, the last one being HSIC, which has 2 clocks. Also there is only 1 OHCI. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31sunxi: usb_phy: Add support for A83T USB PHYsChen-Yu Tsai
The A83T has 3 USB PHYs: 1 for USB OTG, 1 for standard USB 1.1/2.0 host, 1 for USB HSIC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31sunxi: h8_homlet_v2: Set DLDO4 to 3.3VChen-Yu Tsai
DLDO4 supplies power to the PD pins, and the AC200 Ethernet PHY / composite video encoder. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31sunxi: h8_homlet_v2: Set DCDC1 to default voltage (3.3V)Chen-Yu Tsai
The schematics of the h8_homlet_v2 show DCDC1 set to 3.3V. Some Allwinner-based boards set it to 3.0V to conserve power. Since the h8_homlet_v2 is a set-top box board with external power, there is no such requirement. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31power: axp818: Add support for FLDOsChen-Yu Tsai
The FLDOs on AXP818 PMIC normally provide power to CPUS and USB HSIC PHY on the A83T/H8. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31power: axp818: Fix DCDC5 default voltageChen-Yu Tsai
DCDC5 is designed to supply VCC-DRAM, which is normally 1.5V for DDR3, 1.35V for DDR3L, and 1.2V for LPDDR3. Also remove CONFIG_AXP_DCDC5_VOLT from h8_homlet_v2_defconfig. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31sunxi: axp: Support VBUS drive GPIO on AXP818Chen-Yu Tsai
AXP818 supports VBUS drive function, even though the manual does not mention it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31sunxi: axp: Generalize register macros for VBUS drive GPIOChen-Yu Tsai
VBUS drive is supported on AXP221 and later PMICs. Rework the macros so we can support this on later PMICs without too much work. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31musb: sunxi: Add support for A83TChen-Yu Tsai
Like the Allwinner A33 SoC, the A83T is missing the config register from the musb USB DRD hardware block. Use a known working value for it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31power: axp818: Remove undefined axp818_init()Chen-Yu Tsai
axp818_init() is declared, but never defined. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31sunxi: Enable LDO3 and LDO4 at 2.8V on OLinuxIno Lime boardsHans de Goede
LDO3 and LDO4 are used to power port E resp. port G, which are exposed on gpio headers, so enable them at 2.8V as specified in the schematic. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31sunxi: A20-OLinuXino-Lime2: Force 8211CL to masterMichael Haas
Force master mode on the A20-OLinuXino-Lime2. This change is required to get a reliable link at gigabit speeds. Signed-off-by: Michael Haas <haas@computerlinguist.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit v0.10.2 at 2024-08-09 18:49:51 (GMT)