summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-22image-fit: Fix fit_get_node_from_config semanticsPaul Burton
Commit bac17b78dace ("image-fit: switch ENOLINK to ENOENT") changed fit_get_node_from_config to return -ENOENT when a property doesn't exist, but didn't change any of its callers which check return values. Notably it didn't change boot_get_ramdisk, which leads to U-Boot failing to boot FIT images which don't include ramdisks with the following message: Ramdisk image is corrupt or invalid It also didn't take into account that by returning -ENOENT to denote the lack of a property we lost the ability to determine from the return value of fit_get_node_from_config whether it was the property or the configuration node that was missing, which may potentially lead callers to accept invalid FIT images. Fix this by having fit_get_node_from_config return -EINVAL when the configuration node isn't found and -ENOENT when the property isn't found, which seems to make semantic sense. Callers that previously checked for -ENOLINK are adjusted to check for -ENOENT, which fixes the breakage introduced by commit bac17b78dace ("image-fit: switch ENOLINK to ENOENT"). The only other user of the return fit_get_node_from_config return value, indirectly, is bootm_find_os which already checked for -ENOENT. From a read-through of the code I suspect it ought to have been checking for -ENOLINK prior to bac17b78dace ("image-fit: switch ENOLINK to ENOENT") anyway, which would make it right after this patch, but this would be good to get verified by someone who knows this x86 code or is able to test it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jonathan Gray <jsg@jsg.id.au> Cc: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
2016-09-22clk: rk3288: add PWM clock get rateKever Yang
This patch add clk_get_rate for PWM device. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22clk: rk3399: add pmucru controller supportKever Yang
pmucru is a module like cru which is a clock controller manage some PLL and module clocks. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22rk3399: add a empty "sys_proto.h" header fileKever Yang
driver/usb/dwc3/gadget.c need a "sys_proto.h" header file, add a empty one to make compile success. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22rockchip: rk3288: skip lowlevel_init processXu Ziyuan
lowlevel_init() is never needed for rk3288, so drop it. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-09-22board: evb-rk3399: enable usb 2.0 host vbus power on board_initKever Yang
rk3399 using one gpio control signal for two usb 2.0 host port, it's better to enable the power in board file instead of in usb driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22config: evb-rk3399: enable fixed regulatorKever Yang
This patch enable fixed regulator driver for rk3399 evb. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22dts: rk3399-evb: add regulator-fixed for usb host vbusKever Yang
rk3399 evb using one gpio to enable 5V output for both USB 2.0 host port, let's use fixed regulator for them. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22dts: rk3399: add dwc3_typec node for rk3399MengDongyang
rk3399 has two dwc3 controller for type-C port, add the dts node and enable them. Signed-off-by: MengDongyang <daniel.meng@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22config: rk3399: add usb related configsMengDongyang
This patch to enable configs for usb module - xhci - ehci - usb storage - usb net Signed-off-by: MengDongyang <daniel.meng@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Squashed in patch to move to Kconfig: https://patchwork.ozlabs.org/patch/672543/ Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22usb: host: add Kconfig for USB_XHCI_ROCKCHIPKever Yang
Add a Kconfig for Rockchip xhci controller. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Marek Vasut <marex@denx.de>
2016-09-22rockchip: select DM_USB for rockchip SoCMengDongyang
Select DM_USB to compatible with USB DM driver model. Signed-off-by: MengDongyang <daniel.meng@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22usb: xhci-rockchip: add rockchip dwc3 controller driverMengDongyang
This patch add support for rockchip dwc3 controller, which corresponding to the two type-C port on rk3399 evb. Only support usb2.0 currently for we have not enable the usb3.0 phy driver and PD(fusb302) driver. Signed-off-by: MengDongyang <daniel.meng@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-22rk3288: add arch_cpu_init for rk3288Kever Yang
We do some SoC level one time setting initialization in arch_cpu_init. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22rk_pwm: remove grf setting code from driverKever Yang
We consider the grf setting for pwm controller select as the system operation instead of driver operation, move it to soc init, let's remove it from pwm driver first. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22rk_pwm: use clock framework API to get module clockKever Yang
This patch use clock API instead of hardcode for get pwm clock. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Fix printf() to debug() nit: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-22rockchip: use dummy byte only enable OF_PLATDATAXu Ziyuan
Add a condition to determine the rk3288_sdram_channel size. This patch fixes read sdram_channel property failed from DT on rk3288 boards, which not enable OF_PLATDATA. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
2016-09-22dts: rk3399: add pinctrl for sdmmcKever Yang
This patch add pinctrl for sdcard which may not be initialized before uboot. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22rk3399: enable the pwm2/3 pinctrl in board initKever Yang
There is no interrupt line for each PWM which used by pinctrl to get the periph_id, so it's not able to enable the default pinctrl setting by pinctrl framework, let's enable it at board_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22config: evb-rk3399: enable pinctrl driverKever Yang
This patch enable rk3399 pinctrl driver and gpio driver which is sub-node of pinctrl. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22pinctrl: add driver for rk3399Kever Yang
This patch add pinctrl driver for rk3399. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22rk3399: syscon: add support for pmugrfKever Yang
pmugrf is a module like grf which contain some of the iomux registers and other registers. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22configs: fsl: Move SPI/SPI-FLASH configs to defconfigJagan Teki
Moved FSL_QSPI/SPI/SPI-FLASH configs from include/configs into respective used defconfigs. - CONFIG_FSL_QSPI - CONFIG_SPI_FLASH - CONFIG_SPI_FLASH_BAR - CONFIG_SPI_FLASH_STMICRO Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-22spi: Kconfig: Move FSL_QSPI entry to non-dm placeJagan Teki
Since FSL_QSPI driver still supporting non-dm code better to move the Kconfig from DM undefined place. Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-22zynqmp: Remove unnnecessary board config file for dc4Siva Durga Prasad Paladugu
Remove unnecessary board specific config file for DC4 board. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Use the same name for atf image everywhereMichal Simek
Use atf-uboot.ub image instead of atf.ub. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Enable CONFIG_AHCI via KconfigMichal Simek
Move CONFIG_AHCI to defconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Add support for chip ID detectionMichal Simek
Chip ID needs to be known for loading bitstream because U-Boot checks ID from bitstream header in BIT format. BIN format is completely unchecked. The chipid is get from ATF via SMC. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22fpga: xilinx: zynqmp: Add PL bitstream download support for ZynqMPSiva Durga Prasad Paladugu
Add PL bitstream dowload support for ZynqMP Bitstream will be validated by uboot and loaded to PL by invoking an smc instruction to ATF which route this request to PMU FW which will take care of loading it to PL Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Fix USB ulpi phy sequenceMichal Simek
It should be enough to call low(5us)->high pulse for all cases to provide proper reset. There is no need to call high->low->high. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Add support for USB ulpi phy reset via mode pinsMichal Simek
Mode pins can be used as output for reset. Xilinx boards are using this feature as additional way how to reset USB phys and also others chips on the boards. Mode1 is used on all these boards for this feature. Let SPL toggle reset on this pin by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Add support for DFU from SPLMichal Simek
SPL needs to have bigger stack size because of USB. Simple malloc needs to be disabled because dfu code requires different allocation functions. There is no space in OCM that's why random place in DDR is used. BOOTD must be disabled because it is causing compilation error. All variables are disabled and used only variables valid for DFU because they are simple huge. Including automatic variables added by CONFIG_ENV_VARS_UBOOT_CONFIG. Hardcode addresses for u-boot, atf, kernel and dtb just for SPL DFU code. Enable SPL DFU for zcu100. Create new usb_dfu_spl variable just to run Linux kernel loaded in SPL. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM: Add new BOOT_DEVICE_DFU boot modeMichal Simek
This enum is needed when SPL_DFU is enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Add USB boot modeMichal Simek
Add USB boot mode. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Move BSS location to the beginning of ramMichal Simek
With SPL_DFU support memory layout needs to be cleanup that's why move bss to the start of memory. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22spi: zynq: Use variable to remove u32 to u64 conversionsMichal Simek
Current code generates warning when it is compiled for arm64: Warnings: In file included from drivers/spi/zynq_spi.c:14:0: drivers/spi/zynq_spi.c: In function ‘zynq_spi_init_hw’: drivers/spi/zynq_spi.c:95:9: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &regs->enr); ^ ./arch/arm/include/asm/io.h:146:34: note: in definition of macro ‘writel’ #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) ^ drivers/spi/zynq_spi.c: In function ‘zynq_spi_release_bus’: drivers/spi/zynq_spi.c:177:9: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &regs->enr); ^ ./arch/arm/include/asm/io.h:146:34: note: in definition of macro ‘writel’ #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) ^ This patch is using one variable to do conversion via u32 variable. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-09-22ARM64: zynqmp: Fix usb_gadget_handle_interrupt routineMichal Simek
Function is defined in g_dnl.h and have different parameter then it is used. This patch fixes it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Force certain bootmode for SPLMichal Simek
ZynqMP provides an option to overwrite bootmode setting which can change SPL behavior. For example: boot SPL via JTAG and then SPL loads images from SD. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Wire up both USBs available on ZynqMPMichal Simek
The second USB wasn't enabled. This patch fixes it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22fpga: Add Kconfig to fpga subsystemMichal Simek
Add missing Kconfig to fpga subsystem to be able to add new options. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22omap4_panda: Disable ext2/3/4 support in SPLTom Rini
Pandaboard is growing again, disable EXT2/3/4 support in SPL save more space. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-21clk.h: Add <asm/errno.h>Tom Rini
Since we return -ENOSYS in some cases we must have <asm/errno.> available. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-21sf: Move flags macro's to spi_flash_params{} membersJagan Teki
This patch moves flags macro's to respective member position on spi_flash_params{}, for better readabilty and finding the respective member macro's easily. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-21sf: Add CONFIG_SPI_FLASH_USE_4K_SECTORS in spi_flashJagan Teki
Add CONFIG_SPI_FLASH_USE_4K_SECTORS in spi_flash code from header file. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-21sf: Remove SECT_32KJagan Teki
SECT_32K never used anywhere in the code. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-21spi: Remove SPI_RX_FASTJagan Teki
Removed SPI_RX_FAST since default read for spi slaves are always 1-wire fast read. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-21spi: Use mode for rx mode flagsJagan Teki
Make rx mode flags as generic to spi, earlier mode_rx is maintained separately because of some flash specific code. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-21sf: Remove e_rd_cmd from param tableJagan Teki
e_rd_cmd is maintained separately for fastest read command code, since the read commands are computed normally this e_rd_cmd is not required in spi_flash_params table. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-21sf: Simplify fastest read cmd codeJagan Teki
Fastest read command code look for fastest read command taking inputs from spi->mode_rx and flags from param table and controller mode_rx is always been a priority. Since mode_rx is always set from controller side this optimized code doesn't require much and this code required exctra overhead like 1) Maintain e_rx_cmd in param table 2) Maintain mode_rx in spi_slave {} Hence removed this code, and look for read command from normal spi->mode from spi_slave{} and params->flags Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-21spi: ti_qspi: Remove unnecessary udelay for AM437xVignesh R
This udelay() was added as an HACK and is no longer required. All read/write/erase operations work fine even without this delay. Hence, remove the udelay() call. Tested read/write/erase operation on AM437x SK. Also tested QSPI Boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
generated by cgit v0.10.2 at 2024-08-15 03:46:06 (GMT)