summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-31arm/km: add second serial interface for kirkwoodHolger Brunck
Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com>
2011-05-31arm/km: disable ls (through jffs2 support)Valentin Longchamp
This is not supported on our km-arm boards since we have defined CONFIG_SYS_NO_FLASH for our NAND Flash chip. With CONFIG_CMD_JFFS2, the ls command is present and works very badly on our km-arm boards. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de>
2011-05-31arm/km: introduce bootcount env variable and clean km_armValentin Longchamp
This environment variable is used to set the bootcount address for the kernel. last_stage_init is not available for arm platforms. So the calls to set_km_var and set_bootcount_addr are done in misc_init_r. Additionally some unneeded printouts were removed. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com>
2011-05-31arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm fileValentin Longchamp
Since all the boards define the same env settings, this simplifies the board files. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com>
2011-05-31arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.hValentin Longchamp
This define is marvell specific, so it should be present in km_arm. It is however not needed there either, since we set it to the default value that is already set in include/asm/arch-kirkwood/config.h Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Detlev Zundel <dzu@denx.de>
2011-05-26ARMV7: MMC SPL Boot support for SMDKV310 boardChander Kashyap
Added MMC SPL boot support for SMDKV310. This framework design is based on nand_spl support. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26ARMV7: Add support for Samsung SMDKV310 BoardChander Kashyap
SMDKV310 board is based on Samsung S5PV310 SOC. This SOC is very much similar to S5PC210. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1)Minkyu Kang
The source of pwm clock is fixed at evt1. And some registers for pwm clock are removed. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26S5P: add set_mmc_clk for external clock controlJaehoon Chung
This patch added set_mmc_clk for external clock control. c210 didn't support host clock control. So We need external_clock_control function for c210. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-05-26S5PC2XX: Support the cpu revisionMinkyu Kang
S5PC210 SoC have two cpu revisions, and have some difference. So, support the cpu revision for each revision. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-05-26S5P:SROM config code moved to s5p-common directoryChander Kashyap
SROM config code is made common for S5P series of boards. smdkc100.c now refers to s5p-common/sromc.c for SROM related subroutines. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26Add _end for the end of u-boot image for SMDK6400seedshope
Since we rename _end to __bss_end__, But we need add _end symbol for the end of u-boot image. Signed-off-by: Zhong Hongbo <bocui107@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26MMC S5P: Fix typoDirk Behme
Fix typo resulting in the compilation error s5p_mmc.c: In function 's5p_mmc_initialize': s5p_mmc.c:469: error: 'struct mmc' has no member named 'm_bmax' introduced by commit "MMC: make b_max unconditional" (8feafcc49c0b7a9c541904f95a43dbef2fecc38b) Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> CC: John Rigby <john.rigby@linaro.org> CC: Andy Fleming <afleming@freescale.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26S5P: GPIO Macro Values Corrected.Chander Kashyap
S5PC2XX: Macro values for Pull Up and Driver Strength were wrong. S5PC1XX: Macro values for Driver Strength were wrong. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26SMDK2410: various cleanup/code style fixesDavid Müller (ELSOFT AG)
Signed-off-by: David Müller <d.mueller@elsoft.ch> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26SMDK2410: use the CFI driver (and remove the old one)David Müller (ELSOFT AG)
Signed-off-by: David Müller <d.mueller@elsoft.ch> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26SMDK2410: remove unneeded config.mkDavid Müller (ELSOFT AG)
Signed-off-by: David Müller <d.mueller@elsoft.ch> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-26SMDK2410: activate ARM relocation featureDavid Müller (ELSOFT AG)
Signed-off-by: David Müller <d.mueller@elsoft.ch> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-05-23BeagleBoard: fixed typo in typecastJason Kridner
Without this patch, you should get a warning. Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
2011-05-23mvsata: issue hard reset on initializationMichael Walle
Before the actual initialization do a hard reset of the SATA port and the connected device. changes v1->v2: - add comment for udelay Signed-off-by: Michael Walle <michael@walle.cc> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2011-05-23VCMA9: use ARM relocation feature to fix build errorDavid Müller (ELSOFT AG)
Signed-off-by: David Müller <d.mueller@elsoft.ch>
2011-05-23MX31: drop warnings due to missing prototype for mxc_watchdog_reset()Stefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-05-23MX5: drop config.mk from efikamx boardStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Marek Vasut <marek.vasut@gmail.com>
2011-05-23MX31: Make get_reset_cause() static and drop unreachable codeStefano Babic
get_reset_cause() should not be exported. Drop code in the function after return statement that can generate warnings due to unreachable code. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-23MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.Fabio Estevam
commit ed59e58 (Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZ) made the definition of CONFIG_SYS_BOOTMAPSZ unnecessary. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jason Liu <jason.hui@linaro.org>
2011-05-23MX53: Handle silicon revision 2.1 caseFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-23mx5: board: code clean up for checkboard codeJason Liu
The boot cause code has been factor out to soc common code,we need drop the part from the board support code This patch also remove the redundant cpu version print Signed-off-by: Jason Liu <jason.hui@linaro.org>
2011-05-23MX51: vision2: Fix build for vision2 board.Fabio Estevam
config.mk should not be used in board directory and should be removed. Use the same approach for building the image as other MX51/MX53 boards. After this change vision2 board can be built again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-23MX51: vision: Let video mode struct be independant of watchdog.Fabio Estevam
Currently the fb_videomode struct is only declared if CONFIG_HW_WATCHDOG is defined. Remove this dependancy and let the video struct always be declared. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-23MX53: Add initial support for MX53SMD board.Fabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-23MX53: support for freescale MX53LOCO boardJason Liu
This patch add initial support for freescale MX53LOCO board. Network(FEC),SD/MMC,UART have been supported by this patch Signed-off-by: Jason Liu <jason.hui@linaro.org>
2011-05-23mx5: Fix CONFIG_OF_LIBFDT redefined warningShawn Guo
With the following commit, CONFIG_OF_LIBFDT is redefined. 2fa8ca98c37d5b1bb0328b19ddb7e9d162cd9683 Add CONFIG_OF_LIBFDT to more boards. Remove the duplicated definition to fix CONFIG_OF_LIBFDT redefined warning. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-05-23mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definitionShawn Guo
Since the following commit, definition CONFIG_SYS_BOOTMAPSZ is not needed any more. ed59e58786cae9f8afcb575649afc65985beed4d Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZ Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-05-23mx31pdk: Clean up mx31pdk.h fileFabio Estevam
No need to use '#define SYMBOL 1' to make it active. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-22.gitignore: update list of u-boot.* files and add *.binecc
This patch adds additional u-boot.* files mentioned in Makefile, and adds *.bin since these are deleted as part of "make clean". Signed-off-by: Eric Cooper <ecc@cmu.edu>
2011-05-22MPC8xx: Make SPD823TS board build againWolfgang Denk
Commit e59e356 "TFTP: net/tftp.c: add server mode receive" caused the size of some object files to grow which breaks the manually optimized linking for the SPD823TS board. Adjust linker script as needed. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-05-19Prepare v2011.06-rc1Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-05-19Minor coding style cleanup.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-05-19net/tftp.c: fix typoLuca Ceresoli
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
2011-05-19TFTP: add tftpsrv commandLuca Ceresoli
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
2011-05-19TFTP: net/tftp.c: add server mode receiveLuca Ceresoli
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
2011-05-19TFTP: rename STATE_RRQ to STATE_SEND_RRQLuca Ceresoli
With the upcoming TFTP server implementation, requests can be either outgoing or incoming, so avoid ambiguities. Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
2011-05-19TFTP: replace "server" with "remote" in local variable namesLuca Ceresoli
With the upcoming TFTP server implementation, the remote node can be either a client or a server, so avoid ambiguities. Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
2011-05-19net/tftp.c: cosmetic: do not initialise statics to 0 or NULLLuca Ceresoli
This removes the following checkpatch issue: - ERROR: do not initialise statics to 0 or NULL Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de>
2011-05-19net/tftp.c: cosmetic: fix indentationLuca Ceresoli
This removes the following checkpatch issue: - WARNING: suspect code indent for conditional statements Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de>
2011-05-19net/tftp.c: cosmetic: trailing statements should be on next lineLuca Ceresoli
This removes the following checkpatch issue: - ERROR: trailing statements should be on next line Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de>
2011-05-19net/tftp.c: cosmetic: fix brace issuesLuca Ceresoli
This removes the following checkpatch issues: - WARNING: braces {} are not necessary for single statement blocks - WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de>
2011-05-19net/tftp.c: cosmetic: do not use assignment in if conditionLuca Ceresoli
This removes the following checkpatch issue: - ERROR: do not use assignment in if condition. There is one such error left: ERROR: do not use assignment in if condition #239: FILE: tftp.c:239: + if (!ProhibitMcast + && (Bitmap = malloc(Mapsize)) + && eth_get_dev()->mcast) { which would require an additional nested if to be fixed, resulting in longer and less readable code. Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de>
2011-05-19net/tftp.c: cosmetic: fix pointer syntax issuesLuca Ceresoli
This removes the following checkpatch issues: - ERROR: "foo * bar" should be "foo *bar" - ERROR: "(foo*)" should be "(foo *)" Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de>
2011-05-19net/tftp.c: cosmetic: fix whitespace issuesLuca Ceresoli
This removes the following checkpatch issues: - ERROR: space prohibited before that close parenthesis ')' - ERROR: space required after that ';' (ctx:BxV) - ERROR: space required after that ',' (ctx:VxV) - ERROR: space required after that ';' (ctx:VxV) - ERROR: spaces required around that '<<=' (ctx:VxV) - ERROR: spaces required around that '<' (ctx:VxV) - ERROR: spaces required around that '=' (ctx:VxV) - ERROR: spaces required around that '+=' (ctx:VxV) - ERROR: spaces required around that '=' (ctx:VxW) - WARNING: please, no spaces at the start of a line - WARNING: space prohibited between function name and open parenthesis '(' Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de>
generated by cgit v0.10.2 at 2024-11-14 16:09:43 (GMT)