summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-28Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2015-10-28Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini
2015-10-28i2c: Instantiate I2C controllers when selectedMichal Simek
Do not enable both I2C controllers by default. Enable them only when they are selected. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2015-10-28spi: altera_spi: Minor cleanupJagan Teki
- Moved macro definitions to top - Give tab space to CONFIG_ALTERA_SPI_IDLE_VAL value - Re-arrange header includes ascending order Acked-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-28spi: altera_spi: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in altera_spi :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Cc: Marek Vasut <marex@denx.de> Acked-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-28arch/powerpc/cpu/ppc4xx/Kconfig: Finish removing boardsTom Rini
My patches to drop various ppc4xx boards were not build tested and omitted the Kconfig parts. Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-27Merge git://www.denx.de/git/u-boot-ppc4xxTom Rini
2015-10-27Merge git://www.denx.de/git/u-boot-cfi-flashTom Rini
2015-10-27Merge git://git.denx.de/u-boot-dmTom Rini
2015-10-27image.c: Fix non-Android booting with ramdisk and/or device treeTom Rini
In 1fec3c5 I added a check that if we had an Android image we default to trying the kernel address for a ramdisk. However when we don't have an Android image buf is NULL and we oops here. Ensure that we have 'buf' to check first. Reported-by: elipe Balbi <balbi@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-27spi: xilinx_spi: Use GENMASKJagan Teki
Replace numeric mask hexcodes with GENMASK macro in xilinx_spi Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: tegra: Use GENMASKJagan Teki
Replace numeric mask hexcodes with GENMASK macro in tegra*.c Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tom Warren <twarren@nvidia.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: omap3_spi: Use GENMASKJagan Teki
Replace numeric mask hexcodes with GENMASK macro in omap3_spi Cc: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: fsl_qspi: Use GENMASKJagan Teki
Replace numeric mask hexcodes with GENMASK macro in fsl_qspi Cc: York Sun <yorksun@freescale.com> Cc: Haikun Wang <Haikun.Wang@freescale.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: designware_spi: Use GENMASKJagan Teki
Replace numeric mask hexcodes with GENMASK macro in designware_spi Cc: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: atmel_spi: Use GENMASKJagan Teki
Replace numeric mask hexcodes with GENMASK macro in atmel_spi Cc: Bo Shen <voice.shen@atmel.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: xilinx_spi: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in xilinx_spi :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Cc: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: ti_qspi: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in ti_qspi :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Reviewed-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: tegra: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in tegra*.c :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tom Warren <twarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: sh_qspi: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in sh_qspi :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: omap3_spi: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in omap3_spi :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Cc: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: mpc8xxx_spi: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in mpc8xxx_spi :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: ich: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in ich :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: fsl: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in fsl_*spi.c :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Cc: York Sun <yorksun@freescale.com> Cc: Haikun Wang <Haikun.Wang@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: designware_spi: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in designware_spi :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Cc: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: cadence_qspi_apb: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in cadence_qspi_apb :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Cc: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Acked-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: bfin_spi6xx: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in bfin_spi6xx :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: atmel_spi: Use BIT macroJagan Teki
Replace numerical bit shift with BIT macro in atmel_spi :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Cc: Bo Shen <voice.shen@atmel.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: zynq_[q]spi: Use GENMASK macroJagan Teki
GENMASK macro used on zynq_spi.c and zynq_qspi.c GENMASK is used to create a contiguous bitmask([hi:lo]). Ex: (0x7 << 3) => GENMASK(5, 3) Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27spi: zynq_[q]spi: Use BIT macroJagan Teki
Used BIT macro on zynq_spi.c and zynq_qspi.c :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27ocotea: DropTom Rini
This board has not compiled for me for quite some time due to size constraints, remove. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2015-10-27taishan: DropTom Rini
This board has not compiled for me for quite some time due to size constraints, remove. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2015-10-27ebony: DropTom Rini
This board has not compiled for me for quite some time due to size constraints, remove. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2015-10-27taihu: RemoveTom Rini
This board has not compiled for me for quite some time due to size constraints, remove. Cc: John Otken <jotken@softadvances.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2015-10-27cfi_flash: use specific width types for cwordRyan Harkin
This patch changes the cword union to use specific length types that are architecture indepented. This patch also renames the members of the cword union to represent their usage, i.e.: c -> w8 s -> w16 l -> w32 ll -> w64 Where "w" stands for "width" in bits. I discovered this problem when enabling CFI flash on vexpress64. cword.l was an unsigned long int, but it was intended to be 32 bits wide. Unfortunately, it's 64-bits wide on a 64-bit system, meaning that a 64-bit system fails when attempting to use 32-bit wide CFI flash parts. Similar problems also existed with the other cword sizes. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stefan Roese <sr@denx.de>
2015-10-26UBI: Fastmap: Fix PEB array typeHeiko Schocher
The PEB array is an array of __be32, so let's fix the scan_pool() prototype accordingly. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Heiko Schocher <hs@denx.de>
2015-10-26ubi,ubifs: sync with linux v4.2Heiko Schocher
sync with linux v4.2 commit 64291f7db5bd8150a74ad2036f1037e6a0428df2 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Sun Aug 30 11:34:09 2015 -0700 Linux 4.2 This update is needed, as it turned out, that fastmap was in experimental/broken state in kernel v3.15, which was the last base for U-Boot. Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-10-26linux, compat: add missing definitions for ubiHeiko Schocher
add missing definitions for the ubi/ubifs sync with linux 4.2, also change "#define kfree ..." into a static inline, so prevent ubi compile error: CC drivers/mtd/ubi/fastmap.o drivers/mtd/ubi/fastmap.c: In function 'scan_pool': drivers/mtd/ubi/fastmap.c:475:3: error: called object 'free' is not a function Signed-off-by: Heiko Schocher <hs@denx.de>
2015-10-25spi: zynq_qspi: Minor cleanupsJagan Teki
- Use __func__ on debug - Removed unnecessary comment - Fix function name in debug as zynq_qspi_xfer instead of spi_xfer Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25sf: Add FSR support to spi_flash_cmd_wait_readyJagan Teki
This patch adds flag status register reading support to spi_flash_cmd_wait_ready. Cc: Simon Glass <sjg@chromium.org> Cc: Marek Vasut <marex@denx.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Stefan Roese <sr@denx.de> Cc: Tom Warren <twarren@nvidia.com> Cc: Tom Rini <trini@konsulko.com> Cc: Hou Zhiqiang <B48286@freescale.com> Tested-by: Jagan Teki <jteki@openedev.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25sf: Update status reg check in spi_flash_cmd_wait_readyJagan Teki
Current flash wait_ready logic is not modular to add new register status check, hence updated the status check for adding few more register checks in future. Below are the sf speed runs with 'sf update' on whole flash, 16MiB. => sf update 0x100 0x0 0x1000000 device 0 whole chip 16777216 bytes written, 0 bytes skipped in 59.564s, speed 289262 B/s => sf update 0x100 0x0 0x1000000 device 0 whole chip 16777216 bytes written, 0 bytes skipped in 62.549s, speed 275036 B/s => sf update 0x100 0x0 0x1000000 device 0 whole chip 16777216 bytes written, 0 bytes skipped in 61.276s, speed 284359 B/s Cc: Simon Glass <sjg@chromium.org> Cc: Marek Vasut <marex@denx.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Stefan Roese <sr@denx.de> Cc: Tom Warren <twarren@nvidia.com> Cc: Tom Rini <trini@konsulko.com> Tested-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Jagan Teki <jteki@openedev.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-25sf: Make flash->flags use for generic usageJagan Teki
Use the flash->flags for generic usage, not only for dm-spi-flash, this will be used for future flag additions. [Correct the spi flash flags detect logic] Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25sf: Optimize BAR write codeJagan Teki
Optimized spi-flash bar writing code and also removed unnecessary bank_sel in read_ops. Cc: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25sf: Add spi_flash_read_barJagan Teki
Add spi_flash_read_bar function for reading bar and discovering bar commands at probe time. Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25sf: Return bank_sel, if flash->bank_curr == bank_selJagan Teki
If computed bank_sel is same as flash->bank_curr which is computed at probe time, then return the bank_sel instead of zero. Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25spi: zynq_spi: Remove unneeded headersJagan Teki
- Removed unneeded inclusion of header files - Add "Xilinx" on license text Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25zynq-common: Add SPL SPI offset, size configsSiva Durga Prasad Paladugu
Define CONFIG_SYS_SPI_ARGS_OFFS, CONFIG_SYS_SPI_ARGS_SIZE and CONFIG_SYS_SPI_KERNEL_OFFS which will be used in SPL spi mode. These macros defines the device tree offset, size and the kernel image offset in flash respectively. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-10-25spi: zynq_qspi: Fix to configure CPOL, CPHA maskJagan Teki
priv->mode is initialized when .set_speed triggers with mode value, so checking mode for configuring CPOL, CPHA using priv->mode is invalid hence use mode from .set_speed argument, and at the end priv->mode will initialized with mode. This patch also replaces formatting string to use speed instead of mode in .set_speed ops. Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25zynq-common: Enable ISSI SPI-NOR flash supportJagan Teki
This patch enabled CONFIG_SPI_FLASH_ISSI for qspi on zynq boards. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com>
2015-10-25sf: params: Add IS25LP128 part supportJagan Teki
Added support for IS25LP128 flash part. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com>
generated by cgit v0.10.2 at 2024-08-29 04:30:44 (GMT)