summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-27spl: dfu: adding dfu support functions for SPL-DFUB, Ravi
Adding support functions to run dfu spl commands. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-27common: dfu: saperate the dfu common functionalityB, Ravi
The cmd_dfu functionality is been used by both SPL and u-boot, saperating the core dfu functionality moving it to common/dfu.c. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-27spl: dfu: add dfu support in SPLB, Ravi
Traditionally the DFU support is available only as part 2nd stage boot loader(u-boot) and DFU is not supported in SPL. The SPL-DFU feature is useful for boards which does not have MMC/SD, ethernet boot mechanism to boot the board and only has USB inteface. This patch add DFU support in SPL with RAM memory device support to load and execute u-boot. And then leverage full functionality DFU in u-boot to flash boot inital binary images to factory or bare-metal boards to memory devices like SPI, eMMC, MMC/SD card using USB interface. This SPL-DFU support can be enabled through Menuconfig->Boot Images->Enable SPL-DFU support Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-27drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined ↵Sriram Dash
transfers requests This is required for better performance, and performs below tuning: 1. Enable burst length set, and define it as 4/8/16. 2. Set burst request limit to 16 requests. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
2016-09-27colibri_t30: fix usb ethernet functionalityMarcel Ziswiler
Since commit aa7a648747d8c704a9a81c9e493d386930724e9d ("net: Stop including NFS overhead in defragment max") the following has been reproducibly observed while trying to transfer data over TFTP: Load address: 0x80408000 Loading: EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x88008d80 Rx: failed to receive: -5 This patch fixes this by upping our maximal de-fragmentation aka IP packet size again. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-09-27net: asix: Fix ASIX 88772B with driver modelAlban Bedel
Commit 147271209a9d ("net: asix: fix operation without eeprom") added a special handling for ASIX 88772B that enable another type of header. This break the driver in DM mode as the extra handling needed in the receive path is missing. However this new header mode is not required and only seems to increase the code complexity, so this patch revert this part of commit 147271209a9d. This also reverts commit 41d1258aceb45b45f9e68f67a9c40f0afbc09dc9 ("net: asix: Fix AX88772B when used with DriverModel") of late. Fixes: 147271209a9d ("net: asix: fix operation without eeprom") Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-09-26Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
trini: Drop local memset() from examples/standalone/mem_to_mem_idma2intr.c Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-26kconfig: introduce kconfig for UBIHeiko Schocher
move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
2016-09-26armv7: ls102xa: Rename GIC_ADDR and DCSR_RCPM_ADDRYork Sun
Instead of using CONFIG_* name space, rename these two macros to SYS_FSL_* space. Signed-off-by: York Sun <york.sun@nxp.com> CC: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26armv7: ls1021a: Convert CONFIG_LS1_DEEP_SLEEP to Kconfig optionYork Sun
Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26armv8: ls1046ardb_emmc: Fix a typo in defconfigYork Sun
It should be EMMC_BOOT instead of CONFIG_EMMC_BOOT. Signed-off-by: York Sun <york.sun@nxp.com> CC: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26Convert CONFIG_SYS_FSL_ERRATUM_A010315 to Kconfig optionYork Sun
Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2016-09-26armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021AYork Sun
Move this config to Kconfig option and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Calvin Johnson <calvin.johnson@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26driver: ddr: fsl_mmdc: Pass board parameters through data structureYork Sun
Instead of using multiple macros, a data structure is used to pass board-specific parameters to MMDC DDR driver. Signed-off-by: York Sun <york.sun@nxp.com> CC: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046AYork Sun
Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Mingkai Hu <mingkai.hu@nxp.com> CC: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26Merge branch 'master' of git://git.denx.de/u-boot-coldfireTom Rini
2016-09-26i2c: mvtwsi.c: Add support for Marvell Armada 7K/8KStefan Roese
By adding the "marvell,mv78230-i2c" compatible property, we can enable this I2C driver to support these new ARM64 chips as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Heiko Schocher <hs@denx.de>
2016-09-26i2c: mv_i2c.c: Validate read length in I2C commandjinghua
The I2C bus will get stuck when reading 0 byte. So we add validation of the read length in i2c_read(). This issue only occurs on read operation. Signed-off-by: jinghua <jinghua@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Heiko Schocher <hs@denx.de>
2016-09-26i2c: mv_i2c.c: Enable runtime speed selection (standard vs fast mode)Stefan Roese
This patch adds runtime speed configuration to the mv_i2c driver. Currently standard (max 100kHz) and fast mode (max 400kHz) are supported. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Heiko Schocher <hs@denx.de>
2016-09-26i2c: mv_i2c.c: Add DM supportStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Heiko Schocher <hs@denx.de>
2016-09-26i2c: mv_i2c.c: Prepare driver for DM conversionStefan Roese
To prepare for the DM conversion, we add a layer of compatibility functions to be used by both the legacy and the DM functions. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Heiko Schocher <hs@denx.de>
2016-09-26i2c: mv_i2c.c: Remove CONFIG_HARD_I2CStefan Roese
CONFIG_HARD_I2C is not needed, lets remove it. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Heiko Schocher <hs@denx.de>
2016-09-26i2c: mv_i2c.c: cosmetic: Coding style cleanupsStefan Roese
Some mostly indentation coding style cleanups. Also, move this driver to use debug() for debug output. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Heiko Schocher <hs@denx.de>
2016-09-25board: amcore: update to use dm serial driverAngelo Dureghello
Update amcore board to use dm serial driver. Signed-off-by: Angelo Dureghello <angelo@sysam.it> --- Changes for v2: - None
2016-09-25board: amcore: add update scriptsAngelo Dureghello
Add some useful update scripts. Signed-off-by: Angelo Dureghello <angelo@sysam.it> --- Changes for v.2: - Fix syntax error on upgrade_jffs2 script
2016-09-24arm: mvebu: NAND support for DB-88F6820-AMCChris Packham
Enable the NAND interface on this board. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-09-24arm: mvebu: add DB-88F6820-AMC boardChris Packham
This board is a plug in card for Marvell's switch system development kits. Form-factor aside it is similar to the DB-88F6820-GP with the following differences. - TCLK is 200MHz - SPI1 is used - No SATA - No MMC - NAND flash Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-09-24arm: mvebu: create generic 88F6820 config optionChris Packham
88F6820 is a specific Armada-38x chip that is used on the DB-88F6820-GP board. Rather than having DB_88F6820_GP and TARGET_DB_88F6820_GP which selects the former. Rename DB_88F6820_GP to 88F6820 so that other boards using the 88F6820 can be added. Stefan: Change 88F6820 for clearfog as well. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-09-24arm: mvebu: theadorable: Configure board for PCIe 2.0 capabilityStefan Roese
Use a board-specific board_sat_r_get() function to configure the board for PCIe 2.0 capability (e.g. 5GB/s link speed). Otherwise the default of 2.5GB/s will be established. Signed-off-by: Stefan Roese <sr@denx.de>
2016-09-24usb: ehci-generic: support reset control for generic EHCIMasahiro Yamada
This driver is designed in a generic manner, so resets should be handled generically as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-24reset: add no-op stubs for optional reset controlMasahiro Yamada
My motivation for this patch is to make reset control handling optional for generic drivers. I want to add reset control to drivers/usb/host/ehci-generic.c, but it is used by several platforms, some will implement a reset controller driver, some will not. Add no-op stubs in order to avoid link error for drivers that implement reset controlling, but still it is optional. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-24errno.h: sync error macros with linux 4.8-rc7Masahiro Yamada
For synchronization, import macros from - include/uapi/asm-generic/errno-base.h - include/uapi/asm-generic/errno.h - include/linux/errno.h of Linux 4.8-rc7. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-24Move ENOTSUPP defines to include/linux/errno.hMasahiro Yamada
Collect a couple of duplicated defines into a single place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-24Move error macros from <asm-generic/errno.h> to <linux/errno.h>Masahiro Yamada
There are no files that include <asm-generic/errno.h> any more. Move error macro defines to include/linux/errno.h and remove include/asm-generic/errno.h. Going forward, please include <linux/errno.h> when you need error macros. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-24treewide: replace #include <asm-generic/errno.h> with <linux/errno.h>Masahiro Yamada
Now, include/linux/errno.h is a wrapper of <asm-generic/errno.h>. Replace all include directives for <asm-generic/errno.h> with <linux/errno.h>. <asm-generic/...> is supposed to be included from <asm/...> when arch-headers fall back into generic implementation. Generally, they should not be directly included from .c files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Add drivers/usb/host/xhci-rockchip.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23Remove arch/${ARCH}/include/asm/errno.hMasahiro Yamada
Unlike Linux, nothing about errno.h is arch-specific in U-Boot. As you see, all of arch/${ARCH}/include/asm/errno.h is just a wrapper of <asm-generic/errno.h>. Actually, U-Boot does not export headers to user-space, so we just have to care about the consistency in the U-Boot tree. Now all of include directives for <asm/errno.h> are gone. Deprecate <asm/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-09-23treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23Add <linux/errno.h> as a wrapper of <asm-generic/errno.h>Masahiro Yamada
This will be used to consolidate errno.h variants. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-23treewide: use #include <...> to include public headersMasahiro Yamada
We are supposed to use #include <...> to include headers in the public include paths. We should use #include "..." only for headers in local directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-23drivers: squash lines for immediate returnMasahiro Yamada
Remove unneeded variables and assignments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23arch, board: squash lines for immediate returnMasahiro Yamada
Remove unneeded variables and assignments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Angelo Dureghello <angelo@sysam.it>
2016-09-23libfdt: simplify fdt_del_mem_rsv()Masahiro Yamada
The variable "err" is unneeded. [ Device Tree Compiler commit: 36fd7331fb11276c09a6affc0d8cd4977f2fe100 ] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-23x86: squash lines for immediate returnMasahiro Yamada
arch_cpu_init() can be simpler by this refactoring. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-23usb: squash lines for immediate returnMasahiro Yamada
This makes functions much simpler. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23usb: replace ehci_*_remove() with usb_deregister()Masahiro Yamada
The remove callbacks of EHCI drivers are often just a wrapper of ehci_deregister. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-09-23video: squash lines for immediate returnMasahiro Yamada
For vidconsole_post_probe(), it is common coding style to let a probe method return the value of a register function. The others will become simple wrapper functions. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-09-23mmc: squash lines for immediate returnMasahiro Yamada
These functions can be much simpler by squashing lines for immediate return. For *_bind() callbacks, they will be a simple wrapper function of an upper-level bind API. For mmc_set_{boot_bus_width,part_conf}, they will be a wrapper of mmc_switch(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-09-23fs-test.sh: Update expected resultsTom Rini
Thanks to Stefan Brüns we have more tests and a few more passes too, update the expected output now. Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23ext4: Revert rejection of 64bit enabled ext4 fsStefan Brüns
Enable mounting of ext4 fs with 64bit feature, as it is supported now. These had been disabled in 6f94ab6656ceffb3f2a972c8de4c554502b6f2b7. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23ext4: Respect group descriptor size when adjusting free countsStefan Brüns
Also adjust high 16/32 bits when free inode/block counts are modified. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
generated by cgit v0.10.2 at 2024-07-04 17:53:38 (GMT)