summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-27pxa_lcd: make driver cache-awareVasily Khoruzhick
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2016-03-27pxa: add support for D- and I- cachesVasily Khoruzhick
Tested with OHCI and pxafb drivers - no issues found Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2016-03-27pxa: start.S: enable SRAM clockVasily Khoruzhick
SRAM is used for early stack, but kernel disables its clock on suspend. Re-enable SRAM clock on startup, otherwise u-boot crashes on resume from suspend. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2016-03-27zipitz2: enable USB host supportVasily Khoruzhick
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2016-03-27pxa-common: pxa27x has 3 OHCI portsVasily Khoruzhick
3rd port can be used as a device or host. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
2016-03-27zipitz2: enable libfdtVasily Khoruzhick
zipitz2 supports DT boot since linux-4.4 (not mainlined yet) Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2016-03-27pxa_lcd: invert colors for Zipit Z2 to get white on black paletteVasily Khoruzhick
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2016-03-27zipitz2: enable LCD rotationVasily Khoruzhick
z2's screen is rotated by 270 degrees Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
2016-03-27zipitz2: restore board supportVasily Khoruzhick
zipitz2 was dropped in 49d8899ba9c26335e4a12e01c18028fc5e40c796 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2016-03-27cmd: spi: check return value of strdupPeng Fan
Check return value of strdup. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com>
2016-03-27serial: add BCM283x mini UART driverStephen Warren
The RPi3 typically uses the regular UART for high-speed communication with the Bluetooth device, leaving us the mini UART to use for the serial console. Add support for this UART so we can use it. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-27board: ti: am57xx: Set ethernet MAC addresses from EEPROM to envRoger Quadros
The MAC addresses for the PRU Ethernet ports will be available in the board EEPROM as an address range. Populate those MAC addresses (if valid) into the u-boot environment so that they can be passed on to the device tree during fdt_fixup_ethernet(). Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27net: export eth_setenv_enetaddr_by_index() to net.hRoger Quadros
Some TI boards (e.g. IDK) have 4 to 6 ethernet ports and this function is handy at board.c to configure the MAC address of the ports. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27debug_uart: Remove duplicated carriage return handlingBin Meng
Since commit b391d74 "debug_uart: output CR along with LF", the handling in puts() is duplicated, not to mention that it should output carriage return before line feed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27efi_stub: Move carriage return before line feed in putc()Bin Meng
A carriage return needs to execute before a line feed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27net: rtl8169: Fix build error when DEBUG is onBin Meng
When DEBUG_RTL8169 is on, a build error occurs in function 'rtl_init': error: 'dev' undeclared. Fix this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-27mmc: Print send_cmd response only when return value is zeroBin Meng
send_cmd response is valid only when no error happened. If an error occured, let mmc_send_cmd() print the return value to aid debugging. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27mmc: Fix switch..case indentionBin Meng
Correct the indention level of switch..case statements. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27Fix typo choosen in comments and printf logsAlexander Merkle
Minor change: chosen is written with one "o". No code change here, only comment & printf. Signed-off-by: Alexander Merkle <alexander.merkle@lauterbach.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-27Fix typo in chosen parameter of pcm052.dtsAlexander Merkle
Fix typo "choosen" instead of "chosen" in pcm052.dts. Not tested but should fix boot process and terminal output. Signed-off-by: Alexander Merkle <alexander.merkle@lauterbach.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-27Fix typo in chosen parameter in vf610-twr.dtsAlexander Merkle
Fix typo "choosen" instead of "chosen" in vf610-twr.dts. Fixes boot process and terminal output for Vybrid series. Signed-off-by: Alexander Merkle <alexander.merkle@lauterbach.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-27bootp: Prevent u-boot from using others responses.Anton Persson
In rare circumstances two dhcp clients may generate the same bootp ID. If this happens it is vital that the client also checks the hw address in the received response to prevent IP address conflicts. Signed-off-by: Anton Persson <don.juanton@gmail.com>
2016-03-27mmc: bcm2835: fix 64-bit build warningStephen Warren
Fixes: drivers/mmc/bcm2835_sdhci.c: In function ‘bcm2835_sdhci_init’: drivers/mmc/bcm2835_sdhci.c:181:17: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-27ARM: bcm2835: fix 64-bit build warning in mboxStephen Warren
Fixes: arch/arm/mach-bcm283x/mbox.c: In function ‘bcm2835_mbox_call_prop’: arch/arm/mach-bcm283x/mbox.c:118:48: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] arch/arm/mach-bcm283x/mbox.c:126:29: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27ARM: bcm283x: don't always define CONFIG_BCM2835Stephen Warren
Currently, CONFIG_BCM2835 is defined for all BCM283x builds and _BCM2836 is defined when building for that SoC. That means there isn't a single define that means "exactly BCM2835". This will complicate future patches where BCM2835-vs-anything-else needs to be determined simply. Modify the code to define one or the other of CONFIG_BCM2835/BCM2836 so future patches are simpler. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27doc/README.clang: Document sandbox instructionsTom Rini
It is possible to compile and run the sandbox target with clang currently, so document that as well. Cc: Jeroen Hofstee <jeroen@myspectrum.nl> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-27bcm2835 video: Map fb as cachedAlexander Graf
The bcm2835 frame buffer is in RAM, so we can easily map it as cached and gain all the glorious performance boost that brings with it. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-27RPi: Enable caches for rpi2Alexander Graf
Now that we have support for running with caches enabled in HYP mode, opt in to that on the Raspberry Pi 2. This brings a significant performance boost. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-27lcd: Fix compile warning in 64bit modeAlexander Graf
When compiling the code for 64bit, the lcd code emits warnings because it tries to cast pointers to 32bit values. Fix it by casting them to longs instead, actually properly aligning with the function prototype. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-27arm: Add support for HYP mode and LPAE page tablesAlexander Graf
We currently always modify the SVC versions of registers and only support the short descriptor PTE format. Some boards however (like the RPi2) run in HYP mode. There, we need to modify the HYP version of system registers and HYP mode only supports the long descriptor PTE format. So this patch introduces support for both long descriptor PTEs and HYP mode registers. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-27arm64: Add 32bit arm compatible dcache definitionsAlexander Graf
We want to be able to reuse device drivers from 32bit code, so let's add definitions for all the dcache options that 32bit code has. While at it, fix up the DCACHE_OFF configuration. That was setting the bits to declare a PTE a PTE and left the MAIR index bit at 0. Drop the useless bits and make the index explicit. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-27board: ti: DRA7: Add DRA72-rev C evm pinmuxNishanth Menon
Add the pinmux data for rev C evm. This is different from previous revisions of the platform thanks to the deltas introduced both from silicon side and from SoC side. Based on J6EcoES2_EVM_Base_Config-20160309b and PCT-DRA72x-v1.3.0.7 for SR2.0 silicon. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27ARM: OMAP5/DRA7: Expose do_set_iodelayNishanth Menon
do_set_iodelay can now be used from board files based on needs of the platforms variation they have. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27ARM: OMAP5/DRA7: Split iodelay functionality into sub stepsNishanth Menon
Since many platforms may need different pad configuration required depending on variation of the platform with minor deltas, it is easier to maintain a sub step based approach to allow for pin mux and iodelay configuration which may depend on the platform variations and need to be done in IO isolation. While we retain the older __recalibrate_iodelay function which provides a ready sequencing, __recalibrate_iodelay_start and __recalibrate_iodelay_end may be alternatively used now and the callers will be responsible for the correct sequencing of operations. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27board: ti: DRA72: revC evm: Update sdram timing configuration for SR2.0Ravi Babu
DDR configuration has changes from SR1.1 based Rev-A/B version of evm to the SR2.0 based Rev C of the EVM. Rev C evm now uses the higher density MT41K512M8RH-125-AAT:E (IT) which is of size 2GB. Update the DDR configuration based on data from EMIF configuration tool 1.1.1. NOTE: we use eeprom information (ram_size) to update the configuration. Tested-by: Vishal Mahaveer <vishalm@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27ARM: DRA72: sdram: Update sdram ext phy configuration for SR2.0Nishanth Menon
Based on data from EMIF configuration tool 1.1.1. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27ARM: DRA7: hwdata: Update ioreg data for DRA72 SR2.0Nishanth Menon
Based on data from EMIF configuration tool 1.1.1. Expected update for CTRL_WKUP_EMIF1_SDRAM_CONFIG_EXT in the next revision of the tool has been incorporated as well. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27ARM: DRA72x: Add support for detection of SR2.0Ravi Babu
Add support for detection of SR2.0 version of DRA72x family of processors. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27efi_loader: Add GOP supportAlexander Graf
The EFI standard defines a simple boot protocol that an EFI payload can use to access video output. This patch adds support to expose exactly that one (and the mode already in use) as possible graphical configuration to an EFI payload. With this, I can successfully run grub2 with graphical output. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-27ARM: keystone2: Convert BOOT_SET_BITFIELD into static inline functionNishanth Menon
Fix up BOOT_SET_BITFIELD to be a static inline function to be readable with the same functionality. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27ARM: keystone2: Convert BOOT_READ_BITFIELD into static inline functionNishanth Menon
BOOT_READ_BITFIELD can easily be a static inline function and be a little more readable with the same functionality. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27ARM: keystone2: Convert BOOTBITMASK to static inline functionNishanth Menon
BOOTBITMASK is almost impossible to decode, so convert it into a simpler static line functions of equivalent solution. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-26tools: env: fw_parse_script: simplify removal of newline/carriage returnAndreas Fenkart
fgets returns when the first '\n' is found Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-03-26tools: env: split fw_string_blank into skip_chars / skip_blanksAndreas Fenkart
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-03-26tools: env: fw_string_blank: return from loop when item foundAndreas Fenkart
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-03-26tools: env: replace WHITESPACE macro by isblankAndreas Fenkart
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-03-26stm32f746-disco: enable flash supportVikas Manocha
This patch enables embedded flash for stm32f746 discovery board. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-03-26stm32: stm32f4: move flash driver to mtd driver locationVikas Manocha
Same flash driver can be used by other stm32 families like stm32f7. Better place for this driver would be mtd driver location. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-03-25usb: gadget: Move CONFIG_USB_GADGET to KconfigSam Protsenko
The description was borrowed from kernel. "tristate" type was changed to "bool" (I believe we don't support modules for u-boot yet, right?). CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along as well. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Add zynq_zc702 conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-25Merge git://www.denx.de/git/u-boot-marvellTom Rini
generated by cgit v0.10.2 at 2024-09-19 06:11:37 (GMT)