summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-07-19armv7: Add workaround for USB erratum A-008997Suresh Gupta
USB3 LFPS Peak-Peak Differential Output Voltage Adjustment This patch is adding the erratum for LS1021. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
2017-07-19armv7: Add workaround for USB erratum A-009798Suresh Gupta
USB High Speed Squelch Threshold Adjustment This patch is adding the erratum for LS1021. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
2017-07-19armv7: Add workaround for USB erratum A-009008Suresh Gupta
USB High Speed (HS) EYE Height Adjustment This patch is adding the erratum for LS1021. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
2017-07-18LS2080ARDB: Secure Boot defconfig for QSPI boot.Udit Agarwal
Add the secure boot defconfig for QSPI boot on LS2088ARDB platform. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
2017-07-18spi: fsl_qspi: Add 4bytes address supportSuresh Gupta
The QSPI support the direct 4bytes address command for flash read/write/erase. And the address can cover the whole QSPI memory space. signed-off-by: Yuan Yao <yao.yuan@nxp.com>
2017-07-18sf: add ADDR_4B for 4byte address supportSuresh Gupta
Some new flash don't support bar register but use 4bytes address to support exceed 16MB flash size. So add flash flag: ADDR_4B for some flash which support 4bytes address. Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
2017-07-18sf: Fix s25fs512s erase size and remove SECT_4K flagSuresh Gupta
As per data sheet, S25FS512S support Uniform sector option or erase size of 256 kbytes and Page Programming buffer of 256 or 512 Bytes. So, flag SECT_4K have no significance for this flash. Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
2017-07-10Prepare v2017.07Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-10km/common: remove unused function declarationsHolger Brunck
Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
2017-07-10cmd, nand: fix broken output of "nand info"Lothar Waßmann
If the value of either "nand options" or "bbt options" has a zero in the most significant nibble, the '0x' prefix will be isolated from the value like shown below: |Device 0: nand0, sector size 128 KiB | Page size 2048 b | OOB size 64 b | Erase size 131072 b | subpagesize 2048 b | options 0x40000200 | bbt options 0x 60000 Change the format string to produce leading zeroes filling the gap. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
2017-07-10libfdt: Drop -FDT_ERR_TOODEEPSimon Glass
This error code has not been upstreamed and is not really needed since it is unlikely to be triggered. Drop it to maintain compatability with upstream. Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2017-07-10configs: Resync defconfigsTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-09MAINTAINERS: drop bcm283x/rpi maintainershipStephen Warren
It's been a while since I've touched U-Boot on the Raspberry Pi and other things have been taking my time. Drop my maintainership for this port. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2017-07-08powerpc, 8xx: Add support for MCR3000 board from CSSIChristophe Leroy
CS Systemes d'Information (CSSI) manufactures two boards, named MCR3000 and CMPC885 which are respectively based on MPC866 and MPC885 processors. This patch adds support for the first board. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: move Serial driver to drivers/serial/Christophe Leroy
At the same time, move to Kconfig Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: move SPI driver to drivers/spi/Christophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: move FEC Ethernet driver in drivers/netChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: Migrate to KconfigChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc, 8xx: Properly set CPM frequency in the device treeChristophe Leroy
For processors whose core runs at twice the bus frequency, the fallback frequency calculation in Linux provides a wrong result. Therefore, U-boot needs to pass the correct value. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc, 8xx: Handle checkpatch errors and some of the warnings/checksChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc, 8xx: Implement GLL2 ERRATAChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc, 8xx: Use IO accessors to access IO memoryChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc, 8xx: move specific reginfoChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc, 8xx: move immap.c in arch/powerpc/cpu/mpc8xx/Christophe Leroy
immap.c used to be common to several CPUs. It is now only linked to the 8xx, so this patch moves it into arch/powerpc/cpu/mpc8xx/ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc: Partialy restore core of mpc8xxChristophe Leroy
CS Systemes d'Information (CSSI) manufactures 8xx boards for critical communication systems. Those boards have been running U-Boot since 2010 and will have to be maintained until at least 2027. commit 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f ("powerpc, 8xx: remove support for 8xx") orphaned those boards by removing support for the mpc8xx CPU. This commit partially restores support for the 8xx, with the following limitations: - Restores support for MPC866 and MPC885 only - Does not restore IDE, PCMCIA, I2C, USB - Does not restore examples - Does not restore POST - Does not restore Ethernet on SCC - Does not restore console on SCC - Does not restore bedbug and kgdb support As the 866 and 885 do not support the following features, they are not restored either: - VIDEO / LCD - RTC clock The CPM uCODE patch is not restored either, because: - 866 and 885 already have support for I2C and SPI relocation without a uCODE patch - relocation of SMC, I2C or SPI is only needed for using SCCs for Ethernet or QMC The dynamic setup/calculation of clocks is removed, we expect the target being use with the clock and PLPRCR register defined in the configuration. All the clock settings for 8xx prior to 866 is removed as well as we now only support 866 and 885. This code is mature and addresses mature boards. Therefore all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif' is unneeded. The following files are not restored by this patch: - arch/powerpc/cpu/mpc8xx/bedbug_860.c - arch/powerpc/cpu/mpc8xx/fec.h - arch/powerpc/cpu/mpc8xx/kgdb.S - arch/powerpc/cpu/mpc8xx/plprcr_write.S - arch/powerpc/cpu/mpc8xx/scc.c - arch/powerpc/cpu/mpc8xx/upatch.c - arch/powerpc/cpu/mpc8xx/video.c - arch/powerpc/include/asm/status_led.h - arch/powerpc/lib/ide.c - arch/powerpc/lib/ide.h - doc/README.MPC866 - drivers/pcmcia/mpc8xx_pcmcia.c - drivers/rtc/mpc8xx.c - drivers/usb/gadget/mpc8xx_udc.c - drivers/video/mpc8xx_lcd.c - examples/standalone/test_burst.c - examples/standalone/test_burst.h - examples/standalone/test_burst_lib.S - examples/standalone/timer.c - include/mpc823_lcd.h - include/usb/mpc8xx_udc.h - post/cpu/mpc8xx/Makefile - post/cpu/mpc8xx/cache.c - post/cpu/mpc8xx/cache_8xx.S - post/cpu/mpc8xx/ether.c - post/cpu/mpc8xx/spr.c - post/cpu/mpc8xx/uart.c - post/cpu/mpc8xx/usb.c - post/cpu/mpc8xx/watchdog.c Some of the restored files are not located in a proper location. In order to keep traceability of the changes, they will be moved to their correct location and moved to Kconfig in a followup patch. This patch also declares CSSI as point of contact for the update of the 8xx platform, as those boards are the only ones still being maintained on the 8xx area. A later patch will add those boards to the tree. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-07am335x: sl50: Enable CONFIG_AUTOBOOT_KEYEDEnric Balletbo i Serra
On startup the SL50 board halt at U-Boot prompt. Use CONFIG_AUTOBOOT_KEYED to enable autoboot for this board and define the <SPACE> key to get the U-Boot prompt. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2017-07-07board/BuR/brppt1: fix MMC bootHannes Schmelzer
since commit 'd5abcf94c7123167725fc22ace342f0d455093c1' - ti: boot: Register the MMC controllers in SPL in the same way as in u-boot MMC boot on brppt1 board is broken, with this commit we make our board working again. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2017-07-07wdt: Unify option of timeout valueAndy Shevchenko
There is no need to duplicate same option with different name. Kill HW_WATCHDOG_TIMEOUT_MS in favor of WATCHDOG_TIMEOUT_MSECS. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-07wdt: Fix spelling Resettting -> ResettingAndy Shevchenko
Fix spelling Resettting -> Resetting. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-06avr32: Retire AVR32 for goodAndy Shevchenko
AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-06stm32: Correct positioning of declarationSimon Glass
The current code gives a warning: arch/arm/mach-stm32/stm32f7/soc.c: In function 'arch_cpu_init': arch/arm/mach-stm32/stm32f7/soc.c:38:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode for (int i = 0; i < ARRAY_SIZE(stm32_region_config); i++) ^ arch/arm/mach-stm32/stm32f7/soc.c:38:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code Fix it by moving the declaration to the top of the function. Signed-off-by: Simon Glass <sjg@chromium.org> Series-cc trini
2017-07-06km/common: remove unused codeHolger Brunck
The 82xx board mgcoge3ne was removed from the codebase, so this is dead code. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-06configs: Odroid C2: enable device tree overlaysxypron.glpk@gmx.de
The Odroid C2 comes with several expansion options such as an RTC module. As these expansions are not considered in the Linux device tree they have to be enabled via device tree overlays. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-07-06mkimage: fix display of image types listBaruch Siach
Since commit 5b9d44df2307f (mkimage: Display a better list of available image types) mkimage usage text suggest to "use -T to see a list of available image types". Unfortunately, commit 02221f29deb8 (mkimage: Convert to use getopt()) broke that feature, because getopt() fails when -T has no option argument. Add a pseudo image type name 'list' that lists all image types. Update the usage text accordingly. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2017-07-06CHIP: add device tree overlay supportPeter Robinson
CHIP and CHIP Pro devices have options of DIP addon boards some of which need overlays from the beginning so it makes sense to enable device tree overlays. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2017-07-0696boards: dragonboard/hikey: add device tree overlay supportPeter Robinson
96boards CE devices such as the DragonBoard and Hikey devices have numerous mezzanine options some of which need overlays from the beginning so it makes sense to enable device tree overlays. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2017-07-06am335x: beagle/evm: add device tree overlay supportPeter Robinson
TI am33xx devices such as the BeagleBone devices have numerous cape options such as screens some of which need overlays from the beginning so it makes sense to enable evice tree overlays. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2017-07-06Raspberry Pi: add device tree overlay supportPeter Robinson
Raspberry Pi has numerous HAT and other HW expansion options such as screens and cameras some of which need overlays from the beginning so it makes sense to enable evice tree overlays. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2017-07-06arm64: use psci reset on snapdragonRob Clark
This actually works on snapdragon.. not sure why we weren't using it. Fixes reboot/poweroff when using UEFI. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2017-07-06igep003x: Falcon modeLadislav Michl
Implement spl_start_uboot to let Falcon mode work. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Heiko Schocher <hs@denx.de>
2017-07-06igep00x0: Enable UBI fastmapLadislav Michl
Fastmap significantly reduces flash scan time, enable it by default. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Heiko Schocher <hs@denx.de>
2017-07-06spl: Make UBI fastmap support Kconfig selectableLadislav Michl
Fastmap was always enabled in ubispl, make it selectable by CONFIG_MTD_UBI_FASTMAP. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Heiko Schocher <hs@denx.de>
2017-07-06odroid-c2: Populate serial# environment variable from efuseMartin Böh
2017-07-06gpio: add static to get_function()Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-06serial: make serial_stub_* to static functionsMasahiro Yamada
Add missing static to serial_stub_puts(). Unexport serial_stub_{getc,tstc} because they are used locally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-04Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2017-07-04 Highlights this time: bugfixes. With these changes, OpenBSD should be more happy.
2017-07-04efi_loader: abort on unsupported relocation typexypron.glpk@gmx.de
If a relocation type is not supported loading the EFI binary should be aborted. Writing a message only is insufficient. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: use a() != b coding style] Signed-off-by: Alexander Graf <agraf@suse.de>
2017-07-04efi_loader: Add efi-next git tree to MAINTAINERS fileAlexander Graf
The efi-next tree lives on github, not the usual denx git. Reflect this in the MAINTAINERS file so that people can find it. Signed-off-by: Alexander Graf <agraf@suse.de>
2017-07-04efi_loader: efi_handle_protocol set attributesxypron.glpk@gmx.de
UEFI spec 2.7 indicates that HandleProtocol can be implemented by calling OpenProtocol with attributes = EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL. Currently we pass attributes = 0 to efi_open_protocol. 0 is not a valid value when calling OpenProtocol. This does not cause any errors yet because our implementation of OpenProtocol is incomplete. We should pass the correct value to enable a fully compliant implementation of OpenProtocol in the future. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-07-03Prepare v2017.07-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v0.10.2 at 2024-07-04 13:46:28 (GMT)