summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-28configs: Re-sync after boot menu changesTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-28common: add new boot media kconfig entryPeng Fan
Add CONFIG_{SD|NAND|ONENAND|SPI|QSPI|SATA}_BOOT kconfig entries. SoCs supports loading U-Boot from different medias to DRAM, such as i.MX6/7 supports loading U-Boot to DRAM from sd/emmc/nand/qspi/spi/sata and etc. For i.MX, imximage will generate different IVT headers according to boot medias. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Christophe Ricard <christophe-h.ricard@st.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Francois Retief <fgretief@spaceteq.co.za> Cc: Tom Rini <trini@konsulko.com>
2016-06-28Kconfig: make NOR_BOOT a common optionPeng Fan
Not only am335x supports booting from NOR, i.MX6 SoCs also supports booting from NOR. Make NOR_BOOT a common option to let different SoCs share it. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Christophe Ricard <christophe-h.ricard@st.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Francois Retief <fgretief@spaceteq.co.za> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-28maintainers: new email addressSteve Rae
Update the email address for the boards that I maintain. Signed-off-by: Steve Rae <steve.rae@raedomain.com>
2016-06-27fastboot: sparse: improve CHUNK_TYPE_FILL write performanceSteve Rae
- increase the size of the fill buffer - testing has shown a 10x improvement when the sparse image has large CHUNK_TYPE_FILL chunks Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-27fastboot: sparse: implement reserve()Steve Rae
In order to process the CHUNK_TYPE_DONT_CARE properly, there is a requirement to be able to 'reserve' a specified number of blocks in the storage media. Because of the special handling of "bad blocks" in NAND devices, this is implemented in a storage abstraction function. Signed-off-by: Steve Rae <srae@broadcom.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-06-27fastboot: sparse: resync common/image-sparse.c (part 2)Steve Rae
- update fastboot_okay() and fastboot_fail() This file originally came from upstream code. While retaining the storage abstraction feature, this is the second set of the changes required to resync with the cmd_flash_mmc_sparse_img() in the file aboot.c from https://us.codeaurora.org/cgit/quic/la/kernel/lk/plain/app/aboot/aboot.c?h=LE.BR.1.2.1 Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-27fastboot: sparse: resync common/image-sparse.c (part 1)Steve Rae
This file originally came from upstream code. While retaining the storage abstraction feature, this is the first set of the changes required to resync with the cmd_flash_mmc_sparse_img() in the file aboot.c from https://us.codeaurora.org/cgit/quic/la/kernel/lk/plain/app/aboot/aboot.c?h=LE.BR.1.2.1 Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-27fastboot: sparse: remove session-id logicSteve Rae
This "session-id" alogrithm is not required, and currently corrupts the stored image whenever more the one "session" is required. Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-27Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2016-06-27mmc: dw_mmc: fix the wrong AND operationJaehoon Chung
These condition checking are wrong. Original Author's intention might be "&" instead of "&&". It can know whether receive or transmit data request with BIT[4]/BIT[5] of RINTSTS register. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-06-26arm: at91: taurus/axm: add DM and DTS supportHeiko Schocher
add DM and DTS support for the at91 based siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-26arm: at91: smartweb: add DM and DTS supportHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-26arm: at91: dts: Bring in dts files for AT91SAM9G20 and SAM9260Heiko Schocher
Add this files from Linux v4.6-rc5 66b8a424d: [workqueue: fix ghost PENDING flag while doing MQ IO] Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-26corvus DTS / DM supportHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebase on current ToT, don't delete gurnard DTB creation] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-26arm: at91: add CONFIG_AT91SAM9M10G45Heiko Schocher
add support for CONFIG_AT91SAM9M10G45. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-26ARM: at91: Don't invoke spl_boot_device() twiceMarek Vasut
Since the spl_boot_mode() is now passed the boot device to boot from, make use of it instead of inquiring for the boot device again. This allows board_boot_order() to function correctly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-26common: Pass the boot device into spl_boot_mode()Marek Vasut
The SPL code already knows which boot device it calls the spl_boot_mode() on, so pass that information into the function. This allows the code of spl_boot_mode() avoid invoking spl_boot_device() again, but it also lets board_boot_order() correctly alter the behavior of the boot process. The later one is important, since in certain cases, it is desired that spl_boot_device() return value be overriden using board_boot_order(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [add newly introduced zynq variant] Signed-aff-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-24kbuild: avoid race between dtbs and dt/dt.dtb targetsMasahiro Yamada
If the final targets depend on both "dtbs" and "dts/dt.dtb", and -j option is given to the command line, multiple threads descend into the dts/ directory, which causes build error. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com>
2016-06-24efi_loader: Fix typo in distro scriptAlexander Graf
The distro script is supposed to use the internal fdt as fallback if we find no viable other option. However, we're missing a space key to actually make that work. Add the space, so we can successfully load an EFI blob even when there is no device tree provided on the target device. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-06-24board/BuR: rename kwb board to brxre1Hannes Schmelzer
Rename B&R kwb board to brxre1 Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-24board/BuR: rename tseries board to brppt1Hannes Schmelzer
Rename B&R tseries board to brppt1 Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-24arm: bcm235xx: update clock frameworkSteve Rae
The handling of the "usage counter" is incorrect, and the clock should only be disabled when transitioning from 1 to 0. Reported-by: Chris Brand <chris.brand@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-24arm: bcm235xx: fix kps ccuChris Brand
The Kona Peripheral Slave CCU has 4 policy mask registers, not 8. Signed-off-by: Chris Brand <chris.brand@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-24arm: bcm235xx: implement the boot0 hook codeSteve Rae
Choose the Kconfig boot0 hook option and implement the required code. Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-24arm: bcm235xx: choose 8-bit phy bus widthSteve Rae
The Kona PHY supports an 8-bit wide UTMI interface, therefore, choose this Kconfig setting. Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-24clk: sandbox: don't check clk ID against 0Stephen Warren
clk->id is unsigned, so it can't be < 0. Remove the check for that. FWIW, this issue was introduced when the clock API converted e.g. clk_get_rate()'s clock ID parameter from an int to an unsigned long (with a struct clk), without removing this check. Fixes: 135aa9500264 ("clk: convert API to match reset/mailbox style") Reported-by: Coverity Scan Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-06-24common: Fix support for environment file in EXT4Andrej Rosano
Signed-off-by: Andrej Rosano <andrej@inversepath.com>
2016-06-24ARM: armv7: refactor Makefile slightlyMasahiro Yamada
Use Kbuild standard style where possible. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-24hush: complete renaming CONFIG_SYS_HUSH_PARSER to CONFIG_HUSH_PARSERMasahiro Yamada
There is no more define of CONFIG_SYS_HUSH_PARSER. Rename some remaining references and drop the backward compatible Kconfig entry. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-24Move CONFIG_SYS_HUSH_PARSER to Kconfig for last 4 boardsMasahiro Yamada
I still see some defines of this config in board headers. Move them to defconfigs (+ renaming to CONFIG_HUSH_PARSER) to complete this migration. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-24mtd: nand: Drop a blank line in nand_wait()Andre Renaud
This empty line should not be there. Remove it. Signed-off-by: Andre Renaud <andre@designa-electronics.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2016-06-24ARM: move #ifdef to match the error handling codeMasahiro Yamada
Match the #ifdef ... #endif and the code, ret = do_something(); if (ret) return ret; This will make it easier to add more #ifdef'ed code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-24arm64: optimize smp_kick_all_cpusMasahiro Yamada
gic_kick_secondary_cpus can directly return to the caller of smp_kick_all_cpus. We do not have to use x29 register here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-24lib/lzo: bugfix when input data is not compressedJoris Lijssens
When the input data is not compressed at all, lzo1x_decompress_safe will fail, so call memcpy() instead. Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
2016-06-24env: avoid build error for boards without CONFIG_SYS_{CPU, BOARD}Masahiro Yamada
If CONFIG_ENV_VARS_UBOOT_CONFIG is enabled (it is by distro), this code causes build error for boards without CONFIG_SYS_{CPU,_BOARD}. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-24Respect SOURCE_DATE_EPOCH when building FIT images.Vagrant Cascadian
Embedding timestamps in FIT images results in unreproducible builds for targets that generate a fit image, such as dra7xx_evm. This patch uses the SOURCE_DATE_EPOCH environment variable, when set, to use specified value for the date. Thanks to HW42 for debugging the issue and providing the patch: https://lists.alioth.debian.org/pipermail/reproducible-builds/Week-of-Mon-20160606/005722.html For more information about reproducible builds and the SOURCE_DATE_EPOCH specification: https://reproducible-builds.org/specs/source-date-epoch/ https://reproducible-builds.org/ Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-24Use C locale when setting CC_VERSION_STRING and LD_VERSION_STRING.Vagrant Cascadian
The output reported may be locale-dependent, which results in unreproducible builds. $ LANG=C ld --version | head -n 1 GNU ld (GNU Binutils for Debian) 2.26 $ LANG=it_CH.UTF-8 ld --version | head -n 1 ld di GNU (GNU Binutils for Debian) 2.26 Forcing LC_ALL=C ensures the output is consistant regardless of the build environment. Thanks to HW42 for debugging the issue: https://lists.alioth.debian.org/pipermail/reproducible-builds/Week-of-Mon-20160606/005722.html For more information about reproducible builds: https://reproducible-builds.org/ Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-24board: amlogic: Rename folder for Amlogic boardsCarlo Caione
s/hardkernel/amlogic/ to have a single place for all the amlogic-based boards. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com>
2016-06-24configs: gxbb: Introduce a common config header fileCarlo Caione
Introduce a meson-gxbb-common.h header file and derive the configuration for Hardkernel Odroid-C2 board from that. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com>
2016-06-24common: image: minimal android image iminfo supportMichael Trimarchi
We already support iminfo for other images. The idea of this patch is start to have a minimal support for android image format. We still need to print id[] array Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-24mkimage: fit: spl: Add an optional static offset for external dataTeddy Reed
When building a FIT with external data (-E), U-Boot proper may require absolute positioning for executing the external firmware. To acheive this use the (-p) switch, which will replace the amended 'data-offset' with 'data-position' indicating the absolute position of external data. It is considered an error if the requested absolute position overlaps with the initial data required for the compact FIT. Signed-off-by: Teddy Reed <teddy.reed@gmail.com>
2016-06-24cmd: bootefi: cosmeticSergey Kubushyn
Short help (description) in bootefi command has a trailing "\n" that breaks the "help" command output (empty line after "bootefi"). Nothing important, doesn't affect anything but better be fixed in the upcoming release. Still working on i.MX6 and their siblings NAND U-Boot update -- it works here but not ready for a submission yet. Anyway it is for the next cycle, not going to go into this release because it is too big and may affect something else. Also have some thoughts about fastboot (using multiple devices) but this will go into separate email with RFC. Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
2016-06-24omap3: bugfix in timer on rolloverDaniel Gorsulowski
Signed-off-by: Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
2016-06-22Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2016-06-22tools: moveconfig: show suspicious boards with possible misconversionMasahiro Yamada
There are some cases where config options are moved, but they are ripped off at the final savedefconfig stage: - The moved option is not user-configurable, for example, due to a missing prompt in the Kconfig entry - The config was not defined in the original config header despite the Kconfig specifies it as non-bool type - The config define in the header contains reference to another macro, for example: #define CONFIG_CONS_INDEX (CONFIG_SYS_LPC32XX_UART - 2) The current moveconfig does not support recursive macro expansion. In these cases, the conversion is very likely to be an unexpected result. That is why I decided to display the log in yellow color in commit 5da4f857beac ("tools: moveconfig: report when CONFIGs are removed by savedefconfig"). It would be nice to display the list of suspicious boards when the tool finishes processing. It is highly recommended to check the defconfigs once again when this message is displayed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2016-06-22tools: moveconfig: simplify show_failed_boards() and show more infoMasahiro Yamada
Since commit 1d085568b3de ("tools: moveconfig: display log atomically in more readable format"), the function color_text() is clever enough to exclude LF from escape sequences. Exploit it for removing the "for" loops from Slots.show_failed_boards(). Also, display "(the list has been saved in moveconfig.failed)" if there are failed boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2016-06-22tools: moveconfig: simplify source tree switchingMasahiro Yamada
The subprocess.Popen() does not change the child process's working directory if cwd=None is given. Let's exploit this fact to refactor the source directory handling. We no longer have to pass "-C <reference_src_dir>" to the sub-process because self.current_src_dir tracks the source tree against which we want to run defconfig/autoconf. The flag self.use_git_ref is not necessary either because we can know the current state by checking whether the self.current_src_dir is a valid string or None. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-22tools: moveconfig: change class WorkDir to class ReferenceSourceMasahiro Yamada
The class WorkDir can be used in a very generic way, but currently it is only used for containing a reference source directory. This commit changes it for a more dedicated use. The move_config function can be more readable by enclosing the git-clone and git- checkout in the class constructor. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2016-06-22tools: moveconfig: fix needless move for config with default 1Masahiro Yamada
When moving an integer type option with default value 1, the tool moves configs with the same value as the default (, and then removed by the later savedefconfig). This is a needless operation. The KconfigParser.parse_one_config() should compare the config after the "=y -> =1" fixup. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v0.10.2 at 2024-10-03 17:54:32 (GMT)